root/arch/m68k/coldfire/m523x.c

DEFINITIONS

1. m523x_qspi_init
2. m523x_i2c_init
3. m523x_fec_init
4. config_BSP

   1 // SPDX-License-Identifier: GPL-2.0
   2 /***************************************************************************/
   3 
   4 /*
   5  *      m523x.c  -- platform support for ColdFire 523x based boards
   6  *
   7  *      Sub-architcture dependent initialization code for the Freescale
   8  *      523x CPUs.
   9  *
  10  *      Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
  11  *      Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
  12  */
  13 
  14 /***************************************************************************/
  15 
  16 #include <linux/kernel.h>
  17 #include <linux/param.h>
  18 #include <linux/init.h>
  19 #include <linux/io.h>
  20 #include <asm/machdep.h>
  21 #include <asm/coldfire.h>
  22 #include <asm/mcfsim.h>
  23 #include <asm/mcfclk.h>
  24 
  25 /***************************************************************************/
  26 
  27 DEFINE_CLK(pll, "pll.0", MCF_CLK);
  28 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
  29 DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
  30 DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
  31 DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
  32 DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
  33 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
  34 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
  35 DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
  36 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
  37 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
  38 DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
  39 
  40 struct clk *mcf_clks[] = {
  41         &clk_pll,
  42         &clk_sys,
  43         &clk_mcfpit0,
  44         &clk_mcfpit1,
  45         &clk_mcfpit2,
  46         &clk_mcfpit3,
  47         &clk_mcfuart0,
  48         &clk_mcfuart1,
  49         &clk_mcfuart2,
  50         &clk_mcfqspi0,
  51         &clk_fec0,
  52         &clk_mcfi2c0,
  53         NULL
  54 };
  55 
  56 /***************************************************************************/
  57 
  58 static void __init m523x_qspi_init(void)
  59 {
  60 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
  61         u16 par;
  62 
  63         /* setup QSPS pins for QSPI with gpio CS control */
  64         writeb(0x1f, MCFGPIO_PAR_QSPI);
  65         /* and CS2 & CS3 as gpio */
  66         par = readw(MCFGPIO_PAR_TIMER);
  67         par &= 0x3f3f;
  68         writew(par, MCFGPIO_PAR_TIMER);
  69 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
  70 }
  71 
  72 /***************************************************************************/
  73 
  74 static void __init m523x_i2c_init(void)
  75 {
  76 #if IS_ENABLED(CONFIG_I2C_IMX)
  77         u8 par;
  78 
  79         /* setup Port AS Pin Assignment Register for I2C */
  80         /*  set PASPA0 to SCL and PASPA1 to SDA */
  81         par = readb(MCFGPIO_PAR_FECI2C);
  82         par |= 0x0f;
  83         writeb(par, MCFGPIO_PAR_FECI2C);
  84 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
  85 }
  86 
  87 /***************************************************************************/
  88 
  89 static void __init m523x_fec_init(void)
  90 {
  91         /* Set multi-function pins to ethernet use */
  92         writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C);
  93 }
  94 
  95 /***************************************************************************/
  96 
  97 void __init config_BSP(char *commandp, int size)
  98 {
  99         mach_sched_init = hw_timer_init;
 100         m523x_fec_init();
 101         m523x_qspi_init();
 102         m523x_i2c_init();
 103 }
 104 
 105 /***************************************************************************/