root/tools/pci/pcitest.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. run_test
  2. main

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /**
   3  * Userspace PCI Endpoint Test Module
   4  *
   5  * Copyright (C) 2017 Texas Instruments
   6  * Author: Kishon Vijay Abraham I <kishon@ti.com>
   7  */
   8 
   9 #include <errno.h>
  10 #include <fcntl.h>
  11 #include <stdbool.h>
  12 #include <stdio.h>
  13 #include <stdlib.h>
  14 #include <sys/ioctl.h>
  15 #include <unistd.h>
  16 
  17 #include <linux/pcitest.h>
  18 
  19 #define BILLION 1E9
  20 
  21 static char *result[] = { "NOT OKAY", "OKAY" };
  22 static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
  23 
  24 struct pci_test {
  25         char            *device;
  26         char            barnum;
  27         bool            legacyirq;
  28         unsigned int    msinum;
  29         unsigned int    msixnum;
  30         int             irqtype;
  31         bool            set_irqtype;
  32         bool            get_irqtype;
  33         bool            read;
  34         bool            write;
  35         bool            copy;
  36         unsigned long   size;
  37 };
  38 
  39 static int run_test(struct pci_test *test)
  40 {
  41         int ret = -EINVAL;
  42         int fd;
  43 
  44         fd = open(test->device, O_RDWR);
  45         if (fd < 0) {
  46                 perror("can't open PCI Endpoint Test device");
  47                 return -ENODEV;
  48         }
  49 
  50         if (test->barnum >= 0 && test->barnum <= 5) {
  51                 ret = ioctl(fd, PCITEST_BAR, test->barnum);
  52                 fprintf(stdout, "BAR%d:\t\t", test->barnum);
  53                 if (ret < 0)
  54                         fprintf(stdout, "TEST FAILED\n");
  55                 else
  56                         fprintf(stdout, "%s\n", result[ret]);
  57         }
  58 
  59         if (test->set_irqtype) {
  60                 ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
  61                 fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
  62                 if (ret < 0)
  63                         fprintf(stdout, "FAILED\n");
  64                 else
  65                         fprintf(stdout, "%s\n", result[ret]);
  66         }
  67 
  68         if (test->get_irqtype) {
  69                 ret = ioctl(fd, PCITEST_GET_IRQTYPE);
  70                 fprintf(stdout, "GET IRQ TYPE:\t\t");
  71                 if (ret < 0)
  72                         fprintf(stdout, "FAILED\n");
  73                 else
  74                         fprintf(stdout, "%s\n", irq[ret]);
  75         }
  76 
  77         if (test->legacyirq) {
  78                 ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
  79                 fprintf(stdout, "LEGACY IRQ:\t");
  80                 if (ret < 0)
  81                         fprintf(stdout, "TEST FAILED\n");
  82                 else
  83                         fprintf(stdout, "%s\n", result[ret]);
  84         }
  85 
  86         if (test->msinum > 0 && test->msinum <= 32) {
  87                 ret = ioctl(fd, PCITEST_MSI, test->msinum);
  88                 fprintf(stdout, "MSI%d:\t\t", test->msinum);
  89                 if (ret < 0)
  90                         fprintf(stdout, "TEST FAILED\n");
  91                 else
  92                         fprintf(stdout, "%s\n", result[ret]);
  93         }
  94 
  95         if (test->msixnum > 0 && test->msixnum <= 2048) {
  96                 ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
  97                 fprintf(stdout, "MSI-X%d:\t\t", test->msixnum);
  98                 if (ret < 0)
  99                         fprintf(stdout, "TEST FAILED\n");
 100                 else
 101                         fprintf(stdout, "%s\n", result[ret]);
 102         }
 103 
 104         if (test->write) {
 105                 ret = ioctl(fd, PCITEST_WRITE, test->size);
 106                 fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
 107                 if (ret < 0)
 108                         fprintf(stdout, "TEST FAILED\n");
 109                 else
 110                         fprintf(stdout, "%s\n", result[ret]);
 111         }
 112 
 113         if (test->read) {
 114                 ret = ioctl(fd, PCITEST_READ, test->size);
 115                 fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
 116                 if (ret < 0)
 117                         fprintf(stdout, "TEST FAILED\n");
 118                 else
 119                         fprintf(stdout, "%s\n", result[ret]);
 120         }
 121 
 122         if (test->copy) {
 123                 ret = ioctl(fd, PCITEST_COPY, test->size);
 124                 fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
 125                 if (ret < 0)
 126                         fprintf(stdout, "TEST FAILED\n");
 127                 else
 128                         fprintf(stdout, "%s\n", result[ret]);
 129         }
 130 
 131         fflush(stdout);
 132         close(fd);
 133         return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */
 134 }
 135 
 136 int main(int argc, char **argv)
 137 {
 138         int c;
 139         struct pci_test *test;
 140 
 141         test = calloc(1, sizeof(*test));
 142         if (!test) {
 143                 perror("Fail to allocate memory for pci_test\n");
 144                 return -ENOMEM;
 145         }
 146 
 147         /* since '0' is a valid BAR number, initialize it to -1 */
 148         test->barnum = -1;
 149 
 150         /* set default size as 100KB */
 151         test->size = 0x19000;
 152 
 153         /* set default endpoint device */
 154         test->device = "/dev/pci-endpoint-test.0";
 155 
 156         while ((c = getopt(argc, argv, "D:b:m:x:i:Ilhrwcs:")) != EOF)
 157         switch (c) {
 158         case 'D':
 159                 test->device = optarg;
 160                 continue;
 161         case 'b':
 162                 test->barnum = atoi(optarg);
 163                 if (test->barnum < 0 || test->barnum > 5)
 164                         goto usage;
 165                 continue;
 166         case 'l':
 167                 test->legacyirq = true;
 168                 continue;
 169         case 'm':
 170                 test->msinum = atoi(optarg);
 171                 if (test->msinum < 1 || test->msinum > 32)
 172                         goto usage;
 173                 continue;
 174         case 'x':
 175                 test->msixnum = atoi(optarg);
 176                 if (test->msixnum < 1 || test->msixnum > 2048)
 177                         goto usage;
 178                 continue;
 179         case 'i':
 180                 test->irqtype = atoi(optarg);
 181                 if (test->irqtype < 0 || test->irqtype > 2)
 182                         goto usage;
 183                 test->set_irqtype = true;
 184                 continue;
 185         case 'I':
 186                 test->get_irqtype = true;
 187                 continue;
 188         case 'r':
 189                 test->read = true;
 190                 continue;
 191         case 'w':
 192                 test->write = true;
 193                 continue;
 194         case 'c':
 195                 test->copy = true;
 196                 continue;
 197         case 's':
 198                 test->size = strtoul(optarg, NULL, 0);
 199                 continue;
 200         case 'h':
 201         default:
 202 usage:
 203                 fprintf(stderr,
 204                         "usage: %s [options]\n"
 205                         "Options:\n"
 206                         "\t-D <dev>             PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
 207                         "\t-b <bar num>         BAR test (bar number between 0..5)\n"
 208                         "\t-m <msi num>         MSI test (msi number between 1..32)\n"
 209                         "\t-x <msix num>        \tMSI-X test (msix number between 1..2048)\n"
 210                         "\t-i <irq type>        \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
 211                         "\t-I                   Get current IRQ type configured\n"
 212                         "\t-l                   Legacy IRQ test\n"
 213                         "\t-r                   Read buffer test\n"
 214                         "\t-w                   Write buffer test\n"
 215                         "\t-c                   Copy buffer test\n"
 216                         "\t-s <size>            Size of buffer {default: 100KB}\n"
 217                         "\t-h                   Print this help message\n",
 218                         argv[0]);
 219                 return -EINVAL;
 220         }
 221 
 222         return run_test(test);
 223 }

/* [<][>][^][v][top][bottom][index][help] */