tools/power/cpupower/utils/idle_monitor/mperf

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
mperf_get_tsc
mperf_init_stats
mperf_measure_stats
mperf_get_count_percent
mperf_get_count_freq
mperf_start
mperf_stop
init_maxfreq_mode
mperf_register
mperf_unregister
   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
   4  */
   5 
   6 #if defined(__i386__) || defined(__x86_64__)
   7 
   8 #include <stdio.h>
   9 #include <stdint.h>
  10 #include <stdlib.h>
  11 #include <string.h>
  12 #include <limits.h>
  13 
  14 #include <cpufreq.h>
  15 
  16 #include "helpers/helpers.h"
  17 #include "idle_monitor/cpupower-monitor.h"
  18 
  19 #define MSR_APERF       0xE8
  20 #define MSR_MPERF       0xE7
  21 
  22 #define MSR_TSC 0x10
  23 
  24 #define MSR_AMD_HWCR 0xc0010015
  25 
  26 enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT };
  27 
  28 static int mperf_get_count_percent(unsigned int self_id, double *percent,
  29                                    unsigned int cpu);
  30 static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
  31                                 unsigned int cpu);
  32 static struct timespec time_start, time_end;
  33 
  34 static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = {
  35         {
  36                 .name                   = "C0",
  37                 .desc                   = N_("Processor Core not idle"),
  38                 .id                     = C0,
  39                 .range                  = RANGE_THREAD,
  40                 .get_count_percent      = mperf_get_count_percent,
  41         },
  42         {
  43                 .name                   = "Cx",
  44                 .desc                   = N_("Processor Core in an idle state"),
  45                 .id                     = Cx,
  46                 .range                  = RANGE_THREAD,
  47                 .get_count_percent      = mperf_get_count_percent,
  48         },
  49 
  50         {
  51                 .name                   = "Freq",
  52                 .desc                   = N_("Average Frequency (including boost) in MHz"),
  53                 .id                     = AVG_FREQ,
  54                 .range                  = RANGE_THREAD,
  55                 .get_count              = mperf_get_count_freq,
  56         },
  57 };
  58 
  59 enum MAX_FREQ_MODE { MAX_FREQ_SYSFS, MAX_FREQ_TSC_REF };
  60 static int max_freq_mode;
  61 /*
  62  * The max frequency mperf is ticking at (in C0), either retrieved via:
  63  *   1) calculated after measurements if we know TSC ticks at mperf/P0 frequency
  64  *   2) cpufreq /sys/devices/.../cpu0/cpufreq/cpuinfo_max_freq at init time
  65  * 1. Is preferred as it also works without cpufreq subsystem (e.g. on Xen)
  66  */
  67 static unsigned long max_frequency;
  68 
  69 static unsigned long long tsc_at_measure_start;
  70 static unsigned long long tsc_at_measure_end;
  71 static unsigned long long *mperf_previous_count;
  72 static unsigned long long *aperf_previous_count;
  73 static unsigned long long *mperf_current_count;
  74 static unsigned long long *aperf_current_count;
  75 
  76 /* valid flag for all CPUs. If a MSR read failed it will be zero */
  77 static int *is_valid;
  78 
  79 static int mperf_get_tsc(unsigned long long *tsc)
  80 {
  81         int ret;
  82 
  83         ret = read_msr(base_cpu, MSR_TSC, tsc);
  84         if (ret)
  85                 dprint("Reading TSC MSR failed, returning %llu\n", *tsc);
  86         return ret;
  87 }
  88 
  89 static int mperf_init_stats(unsigned int cpu)
  90 {
  91         unsigned long long val;
  92         int ret;
  93 
  94         ret = read_msr(cpu, MSR_APERF, &val);
  95         aperf_previous_count[cpu] = val;
  96         ret |= read_msr(cpu, MSR_MPERF, &val);
  97         mperf_previous_count[cpu] = val;
  98         is_valid[cpu] = !ret;
  99 
 100         return 0;
 101 }
 102 
 103 static int mperf_measure_stats(unsigned int cpu)
 104 {
 105         unsigned long long val;
 106         int ret;
 107 
 108         ret = read_msr(cpu, MSR_APERF, &val);
 109         aperf_current_count[cpu] = val;
 110         ret |= read_msr(cpu, MSR_MPERF, &val);
 111         mperf_current_count[cpu] = val;
 112         is_valid[cpu] = !ret;
 113 
 114         return 0;
 115 }
 116 
 117 static int mperf_get_count_percent(unsigned int id, double *percent,
 118                                    unsigned int cpu)
 119 {
 120         unsigned long long aperf_diff, mperf_diff, tsc_diff;
 121         unsigned long long timediff;
 122 
 123         if (!is_valid[cpu])
 124                 return -1;
 125 
 126         if (id != C0 && id != Cx)
 127                 return -1;
 128 
 129         mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
 130         aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
 131 
 132         if (max_freq_mode == MAX_FREQ_TSC_REF) {
 133                 tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
 134                 *percent = 100.0 * mperf_diff / tsc_diff;
 135                 dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
 136                        mperf_cstates[id].name, mperf_diff, tsc_diff);
 137         } else if (max_freq_mode == MAX_FREQ_SYSFS) {
 138                 timediff = max_frequency * timespec_diff_us(time_start, time_end);
 139                 *percent = 100.0 * mperf_diff / timediff;
 140                 dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n",
 141                        mperf_cstates[id].name, mperf_diff, timediff);
 142         } else
 143                 return -1;
 144 
 145         if (id == Cx)
 146                 *percent = 100.0 - *percent;
 147 
 148         dprint("%s: previous: %llu - current: %llu - (%u)\n",
 149                 mperf_cstates[id].name, mperf_diff, aperf_diff, cpu);
 150         dprint("%s: %f\n", mperf_cstates[id].name, *percent);
 151         return 0;
 152 }
 153 
 154 static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
 155                                 unsigned int cpu)
 156 {
 157         unsigned long long aperf_diff, mperf_diff, time_diff, tsc_diff;
 158 
 159         if (id != AVG_FREQ)
 160                 return 1;
 161 
 162         if (!is_valid[cpu])
 163                 return -1;
 164 
 165         mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
 166         aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
 167 
 168         if (max_freq_mode == MAX_FREQ_TSC_REF) {
 169                 /* Calculate max_freq from TSC count */
 170                 tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
 171                 time_diff = timespec_diff_us(time_start, time_end);
 172                 max_frequency = tsc_diff / time_diff;
 173         }
 174 
 175         *count = max_frequency * ((double)aperf_diff / mperf_diff);
 176         dprint("%s: Average freq based on %s maximum frequency:\n",
 177                mperf_cstates[id].name,
 178                (max_freq_mode == MAX_FREQ_TSC_REF) ? "TSC calculated" : "sysfs read");
 179         dprint("max_frequency: %lu\n", max_frequency);
 180         dprint("aperf_diff: %llu\n", aperf_diff);
 181         dprint("mperf_diff: %llu\n", mperf_diff);
 182         dprint("avg freq:   %llu\n", *count);
 183         return 0;
 184 }
 185 
 186 static int mperf_start(void)
 187 {
 188         int cpu;
 189         unsigned long long dbg;
 190 
 191         clock_gettime(CLOCK_REALTIME, &time_start);
 192         mperf_get_tsc(&tsc_at_measure_start);
 193 
 194         for (cpu = 0; cpu < cpu_count; cpu++)
 195                 mperf_init_stats(cpu);
 196 
 197         mperf_get_tsc(&dbg);
 198         dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
 199         return 0;
 200 }
 201 
 202 static int mperf_stop(void)
 203 {
 204         unsigned long long dbg;
 205         int cpu;
 206 
 207         for (cpu = 0; cpu < cpu_count; cpu++)
 208                 mperf_measure_stats(cpu);
 209 
 210         mperf_get_tsc(&tsc_at_measure_end);
 211         clock_gettime(CLOCK_REALTIME, &time_end);
 212 
 213         mperf_get_tsc(&dbg);
 214         dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
 215 
 216         return 0;
 217 }
 218 
 219 /*
 220  * Mperf register is defined to tick at P0 (maximum) frequency
 221  *
 222  * Instead of reading out P0 which can be tricky to read out from HW,
 223  * we use TSC counter if it reliably ticks at P0/mperf frequency.
 224  *
 225  * Still try to fall back to:
 226  * /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
 227  * on older Intel HW without invariant TSC feature.
 228  * Or on AMD machines where TSC does not tick at P0 (do not exist yet, but
 229  * it's still double checked (MSR_AMD_HWCR)).
 230  *
 231  * On these machines the user would still get useful mperf
 232  * stats when acpi-cpufreq driver is loaded.
 233  */
 234 static int init_maxfreq_mode(void)
 235 {
 236         int ret;
 237         unsigned long long hwcr;
 238         unsigned long min;
 239 
 240         if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC))
 241                 goto use_sysfs;
 242 
 243         if (cpupower_cpu_info.vendor == X86_VENDOR_AMD ||
 244             cpupower_cpu_info.vendor == X86_VENDOR_HYGON) {
 245                 /* MSR_AMD_HWCR tells us whether TSC runs at P0/mperf
 246                  * freq.
 247                  * A test whether hwcr is accessable/available would be:
 248                  * (cpupower_cpu_info.family > 0x10 ||
 249                  *   cpupower_cpu_info.family == 0x10 &&
 250                  *   cpupower_cpu_info.model >= 0x2))
 251                  * This should be the case for all aperf/mperf
 252                  * capable AMD machines and is therefore safe to test here.
 253                  * Compare with Linus kernel git commit: acf01734b1747b1ec4
 254                  */
 255                 ret = read_msr(0, MSR_AMD_HWCR, &hwcr);
 256                 /*
 257                  * If the MSR read failed, assume a Xen system that did
 258                  * not explicitly provide access to it and assume TSC works
 259                 */
 260                 if (ret != 0) {
 261                         dprint("TSC read 0x%x failed - assume TSC working\n",
 262                                MSR_AMD_HWCR);
 263                         return 0;
 264                 } else if (1 & (hwcr >> 24)) {
 265                         max_freq_mode = MAX_FREQ_TSC_REF;
 266                         return 0;
 267                 } else { /* Use sysfs max frequency if available */ }
 268         } else if (cpupower_cpu_info.vendor == X86_VENDOR_INTEL) {
 269                 /*
 270                  * On Intel we assume mperf (in C0) is ticking at same
 271                  * rate than TSC
 272                  */
 273                 max_freq_mode = MAX_FREQ_TSC_REF;
 274                 return 0;
 275         }
 276 use_sysfs:
 277         if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) {
 278                 dprint("Cannot retrieve max freq from cpufreq kernel "
 279                        "subsystem\n");
 280                 return -1;
 281         }
 282         max_freq_mode = MAX_FREQ_SYSFS;
 283         max_frequency /= 1000; /* Default automatically to MHz value */
 284         return 0;
 285 }
 286 
 287 /*
 288  * This monitor provides:
 289  *
 290  * 1) Average frequency a CPU resided in
 291  *    This always works if the CPU has aperf/mperf capabilities
 292  *
 293  * 2) C0 and Cx (any sleep state) time a CPU resided in
 294  *    Works if mperf timer stops ticking in sleep states which
 295  *    seem to be the case on all current HW.
 296  * Both is directly retrieved from HW registers and is independent
 297  * from kernel statistics.
 298  */
 299 struct cpuidle_monitor mperf_monitor;
 300 struct cpuidle_monitor *mperf_register(void)
 301 {
 302         if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
 303                 return NULL;
 304 
 305         if (init_maxfreq_mode())
 306                 return NULL;
 307 
 308         /* Free this at program termination */
 309         is_valid = calloc(cpu_count, sizeof(int));
 310         mperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
 311         aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
 312         mperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
 313         aperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
 314 
 315         mperf_monitor.name_len = strlen(mperf_monitor.name);
 316         return &mperf_monitor;
 317 }
 318 
 319 void mperf_unregister(void)
 320 {
 321         free(mperf_previous_count);
 322         free(aperf_previous_count);
 323         free(mperf_current_count);
 324         free(aperf_current_count);
 325         free(is_valid);
 326 }
 327 
 328 struct cpuidle_monitor mperf_monitor = {
 329         .name                   = "Mperf",
 330         .hw_states_num          = MPERF_CSTATE_COUNT,
 331         .hw_states              = mperf_cstates,
 332         .start                  = mperf_start,
 333         .stop                   = mperf_stop,
 334         .do_register            = mperf_register,
 335         .unregister             = mperf_unregister,
 336         .needs_root             = 1,
 337         .overflow_s             = 922000000 /* 922337203 seconds TSC overflow
 338                                                at 20GHz */
 339 };
 340 #endif /* #if defined(__i386__) || defined(__x86_64__) */
/* [<][>][^][v][top][bottom][index][help] */
root/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c

DEFINITIONS
