root/arch/m68k/bvme6000/config.c

DEFINITIONS

1. bvme6000_parse_bootinfo
2. bvme6000_reset
3. bvme6000_get_model
4. bvme6000_init_IRQ
5. config_bvme6000
6. bvme6000_abort_int
7. bvme6000_timer_int
8. bvme6000_sched_init
9. bvme6000_read_clk
10. bvme6000_hwclk

   1 /*
   2  *  arch/m68k/bvme6000/config.c
   3  *
   4  *  Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk]
   5  *
   6  * Based on:
   7  *
   8  *  linux/amiga/config.c
   9  *
  10  *  Copyright (C) 1993 Hamish Macdonald
  11  *
  12  * This file is subject to the terms and conditions of the GNU General Public
  13  * License.  See the file README.legal in the main directory of this archive
  14  * for more details.
  15  */
  16 
  17 #include <linux/types.h>
  18 #include <linux/kernel.h>
  19 #include <linux/mm.h>
  20 #include <linux/tty.h>
  21 #include <linux/clocksource.h>
  22 #include <linux/console.h>
  23 #include <linux/linkage.h>
  24 #include <linux/init.h>
  25 #include <linux/major.h>
  26 #include <linux/genhd.h>
  27 #include <linux/rtc.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/bcd.h>
  30 
  31 #include <asm/bootinfo.h>
  32 #include <asm/bootinfo-vme.h>
  33 #include <asm/byteorder.h>
  34 #include <asm/pgtable.h>
  35 #include <asm/setup.h>
  36 #include <asm/irq.h>
  37 #include <asm/traps.h>
  38 #include <asm/machdep.h>
  39 #include <asm/bvme6000hw.h>
  40 
  41 static void bvme6000_get_model(char *model);
  42 extern void bvme6000_sched_init(irq_handler_t handler);
  43 extern int bvme6000_hwclk (int, struct rtc_time *);
  44 extern void bvme6000_reset (void);
  45 void bvme6000_set_vectors (void);
  46 
  47 
  48 int __init bvme6000_parse_bootinfo(const struct bi_record *bi)
  49 {
  50         if (be16_to_cpu(bi->tag) == BI_VME_TYPE)
  51                 return 0;
  52         else
  53                 return 1;
  54 }
  55 
  56 void bvme6000_reset(void)
  57 {
  58         volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
  59 
  60         pr_info("\r\n\nCalled bvme6000_reset\r\n"
  61                 "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r");
  62         /* The string of returns is to delay the reset until the whole
  63          * message is output. */
  64         /* Enable the watchdog, via PIT port C bit 4 */
  65 
  66         pit->pcddr      |= 0x10;        /* WDOG enable */
  67 
  68         while(1)
  69                 ;
  70 }
  71 
  72 static void bvme6000_get_model(char *model)
  73 {
  74     sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
  75 }
  76 
  77 /*
  78  * This function is called during kernel startup to initialize
  79  * the bvme6000 IRQ handling routines.
  80  */
  81 static void __init bvme6000_init_IRQ(void)
  82 {
  83         m68k_setup_user_interrupt(VEC_USER, 192);
  84 }
  85 
  86 void __init config_bvme6000(void)
  87 {
  88     volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
  89 
  90     /* Board type is only set by newer versions of vmelilo/tftplilo */
  91     if (!vme_brdtype) {
  92         if (m68k_cputype == CPU_68060)
  93             vme_brdtype = VME_TYPE_BVME6000;
  94         else
  95             vme_brdtype = VME_TYPE_BVME4000;
  96     }
  97 #if 0
  98     /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug
  99      * debugger.  Note trap_init() will splat the abort vector, but
 100      * bvme6000_init_IRQ() will put it back again.  Hopefully. */
 101 
 102     bvme6000_set_vectors();
 103 #endif
 104 
 105     mach_max_dma_address = 0xffffffff;
 106     mach_sched_init      = bvme6000_sched_init;
 107     mach_init_IRQ        = bvme6000_init_IRQ;
 108     mach_hwclk           = bvme6000_hwclk;
 109     mach_reset           = bvme6000_reset;
 110     mach_get_model       = bvme6000_get_model;
 111 
 112     pr_info("Board is %sconfigured as a System Controller\n",
 113             *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
 114 
 115     /* Now do the PIT configuration */
 116 
 117     pit->pgcr   = 0x00; /* Unidirectional 8 bit, no handshake for now */
 118     pit->psrr   = 0x18; /* PIACK and PIRQ functions enabled */
 119     pit->pacr   = 0x00; /* Sub Mode 00, H2 i/p, no DMA */
 120     pit->padr   = 0x00; /* Just to be tidy! */
 121     pit->paddr  = 0x00; /* All inputs for now (safest) */
 122     pit->pbcr   = 0x80; /* Sub Mode 1x, H4 i/p, no DMA */
 123     pit->pbdr   = 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40);
 124                         /* PRI, SYSCON?, Level3, SCC clks from xtal */
 125     pit->pbddr  = 0xf3; /* Mostly outputs */
 126     pit->pcdr   = 0x01; /* PA transceiver disabled */
 127     pit->pcddr  = 0x03; /* WDOG disable */
 128 
 129     /* Disable snooping for Ethernet and VME accesses */
 130 
 131     bvme_acr_addrctl = 0;
 132 }
 133 
 134 
 135 irqreturn_t bvme6000_abort_int (int irq, void *dev_id)
 136 {
 137         unsigned long *new = (unsigned long *)vectors;
 138         unsigned long *old = (unsigned long *)0xf8000000;
 139 
 140         /* Wait for button release */
 141         while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS)
 142                 ;
 143 
 144         *(new+4) = *(old+4);            /* Illegal instruction */
 145         *(new+9) = *(old+9);            /* Trace */
 146         *(new+47) = *(old+47);          /* Trap #15 */
 147         *(new+0x1f) = *(old+0x1f);      /* ABORT switch */
 148         return IRQ_HANDLED;
 149 }
 150 
 151 static u64 bvme6000_read_clk(struct clocksource *cs);
 152 
 153 static struct clocksource bvme6000_clk = {
 154         .name   = "rtc",
 155         .rating = 250,
 156         .read   = bvme6000_read_clk,
 157         .mask   = CLOCKSOURCE_MASK(32),
 158         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 159 };
 160 
 161 static u32 clk_total, clk_offset;
 162 
 163 #define RTC_TIMER_CLOCK_FREQ 8000000
 164 #define RTC_TIMER_CYCLES     (RTC_TIMER_CLOCK_FREQ / HZ)
 165 #define RTC_TIMER_COUNT      ((RTC_TIMER_CYCLES / 2) - 1)
 166 
 167 static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
 168 {
 169     irq_handler_t timer_routine = dev_id;
 170     unsigned long flags;
 171     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 172     unsigned char msr;
 173 
 174     local_irq_save(flags);
 175     msr = rtc->msr & 0xc0;
 176     rtc->msr = msr | 0x20;              /* Ack the interrupt */
 177     clk_total += RTC_TIMER_CYCLES;
 178     clk_offset = 0;
 179     timer_routine(0, NULL);
 180     local_irq_restore(flags);
 181 
 182     return IRQ_HANDLED;
 183 }
 184 
 185 /*
 186  * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms
 187  * (40000 x 125ns).  It will interrupt every 10ms, when T1 goes low.
 188  * So, when reading the elapsed time, you should read timer1,
 189  * subtract it from 39999, and then add 40000 if T1 is high.
 190  * That gives you the number of 125ns ticks in to the 10ms period,
 191  * so divide by 8 to get the microsecond result.
 192  */
 193 
 194 void bvme6000_sched_init (irq_handler_t timer_routine)
 195 {
 196     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 197     unsigned char msr = rtc->msr & 0xc0;
 198 
 199     rtc->msr = 0;       /* Ensure timer registers accessible */
 200 
 201     if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer",
 202                     timer_routine))
 203         panic ("Couldn't register timer int");
 204 
 205     rtc->t1cr_omr = 0x04;       /* Mode 2, ext clk */
 206     rtc->t1msb = RTC_TIMER_COUNT >> 8;
 207     rtc->t1lsb = RTC_TIMER_COUNT & 0xff;
 208     rtc->irr_icr1 &= 0xef;      /* Route timer 1 to INTR pin */
 209     rtc->msr = 0x40;            /* Access int.cntrl, etc */
 210     rtc->pfr_icr0 = 0x80;       /* Just timer 1 ints enabled */
 211     rtc->irr_icr1 = 0;
 212     rtc->t1cr_omr = 0x0a;       /* INTR+T1 active lo, push-pull */
 213     rtc->t0cr_rtmr &= 0xdf;     /* Stop timers in standby */
 214     rtc->msr = 0;               /* Access timer 1 control */
 215     rtc->t1cr_omr = 0x05;       /* Mode 2, ext clk, GO */
 216 
 217     rtc->msr = msr;
 218 
 219     clocksource_register_hz(&bvme6000_clk, RTC_TIMER_CLOCK_FREQ);
 220 
 221     if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0,
 222                                 "abort", bvme6000_abort_int))
 223         panic ("Couldn't register abort int");
 224 }
 225 
 226 
 227 /*
 228  * NOTE:  Don't accept any readings within 5us of rollover, as
 229  * the T1INT bit may be a little slow getting set.  There is also
 230  * a fault in the chip, meaning that reads may produce invalid
 231  * results...
 232  */
 233 
 234 static u64 bvme6000_read_clk(struct clocksource *cs)
 235 {
 236     unsigned long flags;
 237     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 238     volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
 239     unsigned char msr, msb;
 240     unsigned char t1int, t1op;
 241     u32 v = 800000, ov;
 242 
 243     local_irq_save(flags);
 244 
 245     msr = rtc->msr & 0xc0;
 246     rtc->msr = 0;       /* Ensure timer registers accessible */
 247 
 248     do {
 249         ov = v;
 250         t1int = rtc->msr & 0x20;
 251         t1op  = pit->pcdr & 0x04;
 252         rtc->t1cr_omr |= 0x40;          /* Latch timer1 */
 253         msb = rtc->t1msb;               /* Read timer1 */
 254         v = (msb << 8) | rtc->t1lsb;    /* Read timer1 */
 255     } while (t1int != (rtc->msr & 0x20) ||
 256                 t1op != (pit->pcdr & 0x04) ||
 257                         abs(ov-v) > 80 ||
 258                                 v > RTC_TIMER_COUNT - (RTC_TIMER_COUNT / 100));
 259 
 260     v = RTC_TIMER_COUNT - v;
 261     if (!t1op)                          /* If in second half cycle.. */
 262         v += RTC_TIMER_CYCLES / 2;
 263     if (msb > 0 && t1int)
 264         clk_offset = RTC_TIMER_CYCLES;
 265     rtc->msr = msr;
 266 
 267     v += clk_offset + clk_total;
 268 
 269     local_irq_restore(flags);
 270 
 271     return v;
 272 }
 273 
 274 /*
 275  * Looks like op is non-zero for setting the clock, and zero for
 276  * reading the clock.
 277  *
 278  *  struct hwclk_time {
 279  *         unsigned        sec;       0..59
 280  *         unsigned        min;       0..59
 281  *         unsigned        hour;      0..23
 282  *         unsigned        day;       1..31
 283  *         unsigned        mon;       0..11
 284  *         unsigned        year;      00...
 285  *         int             wday;      0..6, 0 is Sunday, -1 means unknown/don't set
 286  * };
 287  */
 288 
 289 int bvme6000_hwclk(int op, struct rtc_time *t)
 290 {
 291         volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 292         unsigned char msr = rtc->msr & 0xc0;
 293 
 294         rtc->msr = 0x40;        /* Ensure clock and real-time-mode-register
 295                                  * are accessible */
 296         if (op)
 297         {       /* Write.... */
 298                 rtc->t0cr_rtmr = t->tm_year%4;
 299                 rtc->bcd_tenms = 0;
 300                 rtc->bcd_sec = bin2bcd(t->tm_sec);
 301                 rtc->bcd_min = bin2bcd(t->tm_min);
 302                 rtc->bcd_hr  = bin2bcd(t->tm_hour);
 303                 rtc->bcd_dom = bin2bcd(t->tm_mday);
 304                 rtc->bcd_mth = bin2bcd(t->tm_mon + 1);
 305                 rtc->bcd_year = bin2bcd(t->tm_year%100);
 306                 if (t->tm_wday >= 0)
 307                         rtc->bcd_dow = bin2bcd(t->tm_wday+1);
 308                 rtc->t0cr_rtmr = t->tm_year%4 | 0x08;
 309         }
 310         else
 311         {       /* Read....  */
 312                 do {
 313                         t->tm_sec  = bcd2bin(rtc->bcd_sec);
 314                         t->tm_min  = bcd2bin(rtc->bcd_min);
 315                         t->tm_hour = bcd2bin(rtc->bcd_hr);
 316                         t->tm_mday = bcd2bin(rtc->bcd_dom);
 317                         t->tm_mon  = bcd2bin(rtc->bcd_mth)-1;
 318                         t->tm_year = bcd2bin(rtc->bcd_year);
 319                         if (t->tm_year < 70)
 320                                 t->tm_year += 100;
 321                         t->tm_wday = bcd2bin(rtc->bcd_dow)-1;
 322                 } while (t->tm_sec != bcd2bin(rtc->bcd_sec));
 323         }
 324 
 325         rtc->msr = msr;
 326 
 327         return 0;
 328 }