root/arch/m68k/lib/checksum.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. csum_partial
  2. csum_partial_copy_from_user
  3. csum_partial_copy_nocheck

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * INET         An implementation of the TCP/IP protocol suite for the LINUX
   4  *              operating system.  INET is implemented using the  BSD Socket
   5  *              interface as the means of communication with the user level.
   6  *
   7  *              IP/TCP/UDP checksumming routines
   8  *
   9  * Authors:     Jorge Cwik, <jorge@laser.satlink.net>
  10  *              Arnt Gulbrandsen, <agulbra@nvg.unit.no>
  11  *              Tom May, <ftom@netcom.com>
  12  *              Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
  13  *              Lots of code moved from tcp.c and ip.c; see those files
  14  *              for more names.
  15  *
  16  * 03/02/96     Jes Sorensen, Andreas Schwab, Roman Hodek:
  17  *              Fixed some nasty bugs, causing some horrible crashes.
  18  *              A: At some points, the sum (%0) was used as
  19  *              length-counter instead of the length counter
  20  *              (%1). Thanks to Roman Hodek for pointing this out.
  21  *              B: GCC seems to mess up if one uses too many
  22  *              data-registers to hold input values and one tries to
  23  *              specify d0 and d1 as scratch registers. Letting gcc
  24  *              choose these registers itself solves the problem.
  25  *
  26  * 1998/8/31    Andreas Schwab:
  27  *              Zero out rest of buffer on exception in
  28  *              csum_partial_copy_from_user.
  29  */
  30 
  31 #include <linux/module.h>
  32 #include <net/checksum.h>
  33 
  34 /*
  35  * computes a partial checksum, e.g. for TCP/UDP fragments
  36  */
  37 
  38 __wsum csum_partial(const void *buff, int len, __wsum sum)
  39 {
  40         unsigned long tmp1, tmp2;
  41           /*
  42            * Experiments with ethernet and slip connections show that buff
  43            * is aligned on either a 2-byte or 4-byte boundary.
  44            */
  45         __asm__("movel %2,%3\n\t"
  46                 "btst #1,%3\n\t"        /* Check alignment */
  47                 "jeq 2f\n\t"
  48                 "subql #2,%1\n\t"       /* buff%4==2: treat first word */
  49                 "jgt 1f\n\t"
  50                 "addql #2,%1\n\t"       /* len was == 2, treat only rest */
  51                 "jra 4f\n"
  52              "1:\t"
  53                 "addw %2@+,%0\n\t"      /* add first word to sum */
  54                 "clrl %3\n\t"
  55                 "addxl %3,%0\n"         /* add X bit */
  56              "2:\t"
  57                 /* unrolled loop for the main part: do 8 longs at once */
  58                 "movel %1,%3\n\t"       /* save len in tmp1 */
  59                 "lsrl #5,%1\n\t"        /* len/32 */
  60                 "jeq 2f\n\t"            /* not enough... */
  61                 "subql #1,%1\n"
  62              "1:\t"
  63                 "movel %2@+,%4\n\t"
  64                 "addxl %4,%0\n\t"
  65                 "movel %2@+,%4\n\t"
  66                 "addxl %4,%0\n\t"
  67                 "movel %2@+,%4\n\t"
  68                 "addxl %4,%0\n\t"
  69                 "movel %2@+,%4\n\t"
  70                 "addxl %4,%0\n\t"
  71                 "movel %2@+,%4\n\t"
  72                 "addxl %4,%0\n\t"
  73                 "movel %2@+,%4\n\t"
  74                 "addxl %4,%0\n\t"
  75                 "movel %2@+,%4\n\t"
  76                 "addxl %4,%0\n\t"
  77                 "movel %2@+,%4\n\t"
  78                 "addxl %4,%0\n\t"
  79                 "dbra %1,1b\n\t"
  80                 "clrl %4\n\t"
  81                 "addxl %4,%0\n\t"       /* add X bit */
  82                 "clrw %1\n\t"
  83                 "subql #1,%1\n\t"
  84                 "jcc 1b\n"
  85              "2:\t"
  86                 "movel %3,%1\n\t"       /* restore len from tmp1 */
  87                 "andw #0x1c,%3\n\t"     /* number of rest longs */
  88                 "jeq 4f\n\t"
  89                 "lsrw #2,%3\n\t"
  90                 "subqw #1,%3\n"
  91              "3:\t"
  92                 /* loop for rest longs */
  93                 "movel %2@+,%4\n\t"
  94                 "addxl %4,%0\n\t"
  95                 "dbra %3,3b\n\t"
  96                 "clrl %4\n\t"
  97                 "addxl %4,%0\n"         /* add X bit */
  98              "4:\t"
  99                 /* now check for rest bytes that do not fit into longs */
 100                 "andw #3,%1\n\t"
 101                 "jeq 7f\n\t"
 102                 "clrl %4\n\t"           /* clear tmp2 for rest bytes */
 103                 "subqw #2,%1\n\t"
 104                 "jlt 5f\n\t"
 105                 "movew %2@+,%4\n\t"     /* have rest >= 2: get word */
 106                 "swap %4\n\t"           /* into bits 16..31 */
 107                 "tstw %1\n\t"           /* another byte? */
 108                 "jeq 6f\n"
 109              "5:\t"
 110                 "moveb %2@,%4\n\t"      /* have odd rest: get byte */
 111                 "lslw #8,%4\n\t"        /* into bits 8..15; 16..31 untouched */
 112              "6:\t"
 113                 "addl %4,%0\n\t"        /* now add rest long to sum */
 114                 "clrl %4\n\t"
 115                 "addxl %4,%0\n"         /* add X bit */
 116              "7:\t"
 117                 : "=d" (sum), "=d" (len), "=a" (buff),
 118                   "=&d" (tmp1), "=&d" (tmp2)
 119                 : "0" (sum), "1" (len), "2" (buff)
 120             );
 121         return(sum);
 122 }
 123 
 124 EXPORT_SYMBOL(csum_partial);
 125 
 126 
 127 /*
 128  * copy from user space while checksumming, with exception handling.
 129  */
 130 
 131 __wsum
 132 csum_partial_copy_from_user(const void __user *src, void *dst,
 133                             int len, __wsum sum, int *csum_err)
 134 {
 135         /*
 136          * GCC doesn't like more than 10 operands for the asm
 137          * statements so we have to use tmp2 for the error
 138          * code.
 139          */
 140         unsigned long tmp1, tmp2;
 141 
 142         __asm__("movel %2,%4\n\t"
 143                 "btst #1,%4\n\t"        /* Check alignment */
 144                 "jeq 2f\n\t"
 145                 "subql #2,%1\n\t"       /* buff%4==2: treat first word */
 146                 "jgt 1f\n\t"
 147                 "addql #2,%1\n\t"       /* len was == 2, treat only rest */
 148                 "jra 4f\n"
 149              "1:\n"
 150              "10:\t"
 151                 "movesw %2@+,%4\n\t"    /* add first word to sum */
 152                 "addw %4,%0\n\t"
 153                 "movew %4,%3@+\n\t"
 154                 "clrl %4\n\t"
 155                 "addxl %4,%0\n"         /* add X bit */
 156              "2:\t"
 157                 /* unrolled loop for the main part: do 8 longs at once */
 158                 "movel %1,%4\n\t"       /* save len in tmp1 */
 159                 "lsrl #5,%1\n\t"        /* len/32 */
 160                 "jeq 2f\n\t"            /* not enough... */
 161                 "subql #1,%1\n"
 162              "1:\n"
 163              "11:\t"
 164                 "movesl %2@+,%5\n\t"
 165                 "addxl %5,%0\n\t"
 166                 "movel %5,%3@+\n\t"
 167              "12:\t"
 168                 "movesl %2@+,%5\n\t"
 169                 "addxl %5,%0\n\t"
 170                 "movel %5,%3@+\n\t"
 171              "13:\t"
 172                 "movesl %2@+,%5\n\t"
 173                 "addxl %5,%0\n\t"
 174                 "movel %5,%3@+\n\t"
 175              "14:\t"
 176                 "movesl %2@+,%5\n\t"
 177                 "addxl %5,%0\n\t"
 178                 "movel %5,%3@+\n\t"
 179              "15:\t"
 180                 "movesl %2@+,%5\n\t"
 181                 "addxl %5,%0\n\t"
 182                 "movel %5,%3@+\n\t"
 183              "16:\t"
 184                 "movesl %2@+,%5\n\t"
 185                 "addxl %5,%0\n\t"
 186                 "movel %5,%3@+\n\t"
 187              "17:\t"
 188                 "movesl %2@+,%5\n\t"
 189                 "addxl %5,%0\n\t"
 190                 "movel %5,%3@+\n\t"
 191              "18:\t"
 192                 "movesl %2@+,%5\n\t"
 193                 "addxl %5,%0\n\t"
 194                 "movel %5,%3@+\n\t"
 195                 "dbra %1,1b\n\t"
 196                 "clrl %5\n\t"
 197                 "addxl %5,%0\n\t"       /* add X bit */
 198                 "clrw %1\n\t"
 199                 "subql #1,%1\n\t"
 200                 "jcc 1b\n"
 201              "2:\t"
 202                 "movel %4,%1\n\t"       /* restore len from tmp1 */
 203                 "andw #0x1c,%4\n\t"     /* number of rest longs */
 204                 "jeq 4f\n\t"
 205                 "lsrw #2,%4\n\t"
 206                 "subqw #1,%4\n"
 207              "3:\n"
 208                 /* loop for rest longs */
 209              "19:\t"
 210                 "movesl %2@+,%5\n\t"
 211                 "addxl %5,%0\n\t"
 212                 "movel %5,%3@+\n\t"
 213                 "dbra %4,3b\n\t"
 214                 "clrl %5\n\t"
 215                 "addxl %5,%0\n"         /* add X bit */
 216              "4:\t"
 217                 /* now check for rest bytes that do not fit into longs */
 218                 "andw #3,%1\n\t"
 219                 "jeq 7f\n\t"
 220                 "clrl %5\n\t"           /* clear tmp2 for rest bytes */
 221                 "subqw #2,%1\n\t"
 222                 "jlt 5f\n\t"
 223              "20:\t"
 224                 "movesw %2@+,%5\n\t"    /* have rest >= 2: get word */
 225                 "movew %5,%3@+\n\t"
 226                 "swap %5\n\t"           /* into bits 16..31 */
 227                 "tstw %1\n\t"           /* another byte? */
 228                 "jeq 6f\n"
 229              "5:\n"
 230              "21:\t"
 231                 "movesb %2@,%5\n\t"     /* have odd rest: get byte */
 232                 "moveb %5,%3@+\n\t"
 233                 "lslw #8,%5\n\t"        /* into bits 8..15; 16..31 untouched */
 234              "6:\t"
 235                 "addl %5,%0\n\t"        /* now add rest long to sum */
 236                 "clrl %5\n\t"
 237                 "addxl %5,%0\n\t"       /* add X bit */
 238              "7:\t"
 239                 "clrl %5\n"             /* no error - clear return value */
 240              "8:\n"
 241                 ".section .fixup,\"ax\"\n"
 242                 ".even\n"
 243                 /* If any exception occurs zero out the rest.
 244                    Similarities with the code above are intentional :-) */
 245              "90:\t"
 246                 "clrw %3@+\n\t"
 247                 "movel %1,%4\n\t"
 248                 "lsrl #5,%1\n\t"
 249                 "jeq 1f\n\t"
 250                 "subql #1,%1\n"
 251              "91:\t"
 252                 "clrl %3@+\n"
 253              "92:\t"
 254                 "clrl %3@+\n"
 255              "93:\t"
 256                 "clrl %3@+\n"
 257              "94:\t"
 258                 "clrl %3@+\n"
 259              "95:\t"
 260                 "clrl %3@+\n"
 261              "96:\t"
 262                 "clrl %3@+\n"
 263              "97:\t"
 264                 "clrl %3@+\n"
 265              "98:\t"
 266                 "clrl %3@+\n\t"
 267                 "dbra %1,91b\n\t"
 268                 "clrw %1\n\t"
 269                 "subql #1,%1\n\t"
 270                 "jcc 91b\n"
 271              "1:\t"
 272                 "movel %4,%1\n\t"
 273                 "andw #0x1c,%4\n\t"
 274                 "jeq 1f\n\t"
 275                 "lsrw #2,%4\n\t"
 276                 "subqw #1,%4\n"
 277              "99:\t"
 278                 "clrl %3@+\n\t"
 279                 "dbra %4,99b\n\t"
 280              "1:\t"
 281                 "andw #3,%1\n\t"
 282                 "jeq 9f\n"
 283              "100:\t"
 284                 "clrw %3@+\n\t"
 285                 "tstw %1\n\t"
 286                 "jeq 9f\n"
 287              "101:\t"
 288                 "clrb %3@+\n"
 289              "9:\t"
 290 #define STR(X) STR1(X)
 291 #define STR1(X) #X
 292                 "moveq #-" STR(EFAULT) ",%5\n\t"
 293                 "jra 8b\n"
 294                 ".previous\n"
 295                 ".section __ex_table,\"a\"\n"
 296                 ".long 10b,90b\n"
 297                 ".long 11b,91b\n"
 298                 ".long 12b,92b\n"
 299                 ".long 13b,93b\n"
 300                 ".long 14b,94b\n"
 301                 ".long 15b,95b\n"
 302                 ".long 16b,96b\n"
 303                 ".long 17b,97b\n"
 304                 ".long 18b,98b\n"
 305                 ".long 19b,99b\n"
 306                 ".long 20b,100b\n"
 307                 ".long 21b,101b\n"
 308                 ".previous"
 309                 : "=d" (sum), "=d" (len), "=a" (src), "=a" (dst),
 310                   "=&d" (tmp1), "=d" (tmp2)
 311                 : "0" (sum), "1" (len), "2" (src), "3" (dst)
 312             );
 313 
 314         *csum_err = tmp2;
 315 
 316         return(sum);
 317 }
 318 
 319 EXPORT_SYMBOL(csum_partial_copy_from_user);
 320 
 321 
 322 /*
 323  * copy from kernel space while checksumming, otherwise like csum_partial
 324  */
 325 
 326 __wsum
 327 csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
 328 {
 329         unsigned long tmp1, tmp2;
 330         __asm__("movel %2,%4\n\t"
 331                 "btst #1,%4\n\t"        /* Check alignment */
 332                 "jeq 2f\n\t"
 333                 "subql #2,%1\n\t"       /* buff%4==2: treat first word */
 334                 "jgt 1f\n\t"
 335                 "addql #2,%1\n\t"       /* len was == 2, treat only rest */
 336                 "jra 4f\n"
 337              "1:\t"
 338                 "movew %2@+,%4\n\t"     /* add first word to sum */
 339                 "addw %4,%0\n\t"
 340                 "movew %4,%3@+\n\t"
 341                 "clrl %4\n\t"
 342                 "addxl %4,%0\n"         /* add X bit */
 343              "2:\t"
 344                 /* unrolled loop for the main part: do 8 longs at once */
 345                 "movel %1,%4\n\t"       /* save len in tmp1 */
 346                 "lsrl #5,%1\n\t"        /* len/32 */
 347                 "jeq 2f\n\t"            /* not enough... */
 348                 "subql #1,%1\n"
 349              "1:\t"
 350                 "movel %2@+,%5\n\t"
 351                 "addxl %5,%0\n\t"
 352                 "movel %5,%3@+\n\t"
 353                 "movel %2@+,%5\n\t"
 354                 "addxl %5,%0\n\t"
 355                 "movel %5,%3@+\n\t"
 356                 "movel %2@+,%5\n\t"
 357                 "addxl %5,%0\n\t"
 358                 "movel %5,%3@+\n\t"
 359                 "movel %2@+,%5\n\t"
 360                 "addxl %5,%0\n\t"
 361                 "movel %5,%3@+\n\t"
 362                 "movel %2@+,%5\n\t"
 363                 "addxl %5,%0\n\t"
 364                 "movel %5,%3@+\n\t"
 365                 "movel %2@+,%5\n\t"
 366                 "addxl %5,%0\n\t"
 367                 "movel %5,%3@+\n\t"
 368                 "movel %2@+,%5\n\t"
 369                 "addxl %5,%0\n\t"
 370                 "movel %5,%3@+\n\t"
 371                 "movel %2@+,%5\n\t"
 372                 "addxl %5,%0\n\t"
 373                 "movel %5,%3@+\n\t"
 374                 "dbra %1,1b\n\t"
 375                 "clrl %5\n\t"
 376                 "addxl %5,%0\n\t"       /* add X bit */
 377                 "clrw %1\n\t"
 378                 "subql #1,%1\n\t"
 379                 "jcc 1b\n"
 380              "2:\t"
 381                 "movel %4,%1\n\t"       /* restore len from tmp1 */
 382                 "andw #0x1c,%4\n\t"     /* number of rest longs */
 383                 "jeq 4f\n\t"
 384                 "lsrw #2,%4\n\t"
 385                 "subqw #1,%4\n"
 386              "3:\t"
 387                 /* loop for rest longs */
 388                 "movel %2@+,%5\n\t"
 389                 "addxl %5,%0\n\t"
 390                 "movel %5,%3@+\n\t"
 391                 "dbra %4,3b\n\t"
 392                 "clrl %5\n\t"
 393                 "addxl %5,%0\n"         /* add X bit */
 394              "4:\t"
 395                 /* now check for rest bytes that do not fit into longs */
 396                 "andw #3,%1\n\t"
 397                 "jeq 7f\n\t"
 398                 "clrl %5\n\t"           /* clear tmp2 for rest bytes */
 399                 "subqw #2,%1\n\t"
 400                 "jlt 5f\n\t"
 401                 "movew %2@+,%5\n\t"     /* have rest >= 2: get word */
 402                 "movew %5,%3@+\n\t"
 403                 "swap %5\n\t"           /* into bits 16..31 */
 404                 "tstw %1\n\t"           /* another byte? */
 405                 "jeq 6f\n"
 406              "5:\t"
 407                 "moveb %2@,%5\n\t"      /* have odd rest: get byte */
 408                 "moveb %5,%3@+\n\t"
 409                 "lslw #8,%5\n"          /* into bits 8..15; 16..31 untouched */
 410              "6:\t"
 411                 "addl %5,%0\n\t"        /* now add rest long to sum */
 412                 "clrl %5\n\t"
 413                 "addxl %5,%0\n"         /* add X bit */
 414              "7:\t"
 415                 : "=d" (sum), "=d" (len), "=a" (src), "=a" (dst),
 416                   "=&d" (tmp1), "=&d" (tmp2)
 417                 : "0" (sum), "1" (len), "2" (src), "3" (dst)
 418             );
 419     return(sum);
 420 }
 421 EXPORT_SYMBOL(csum_partial_copy_nocheck);

/* [<][>][^][v][top][bottom][index][help] */