root/tools/testing/selftests/ir/ir_loopback.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. lirc_open
  2. main

   1 // SPDX-License-Identifier: GPL-2.0
   2 // test ir decoder
   3 //
   4 // Copyright (C) 2018 Sean Young <sean@mess.org>
   5 
   6 // When sending LIRC_MODE_SCANCODE, the IR will be encoded. rc-loopback
   7 // will send this IR to the receiver side, where we try to read the decoded
   8 // IR. Decoding happens in a separate kernel thread, so we will need to
   9 // wait until that is scheduled, hence we use poll to check for read
  10 // readiness.
  11 
  12 #include <linux/lirc.h>
  13 #include <errno.h>
  14 #include <stdio.h>
  15 #include <stdlib.h>
  16 #include <stdbool.h>
  17 #include <string.h>
  18 #include <unistd.h>
  19 #include <poll.h>
  20 #include <time.h>
  21 #include <sys/types.h>
  22 #include <sys/ioctl.h>
  23 #include <dirent.h>
  24 #include <sys/stat.h>
  25 #include <fcntl.h>
  26 #include "../kselftest.h"
  27 
  28 #define TEST_SCANCODES  10
  29 #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
  30 #define SYSFS_PATH_MAX 256
  31 #define DNAME_PATH_MAX 256
  32 
  33 static const struct {
  34         enum rc_proto proto;
  35         const char *name;
  36         unsigned int mask;
  37         const char *decoder;
  38 } protocols[] = {
  39         { RC_PROTO_RC5, "rc-5", 0x1f7f, "rc-5" },
  40         { RC_PROTO_RC5X_20, "rc-5x-20", 0x1f7f3f, "rc-5" },
  41         { RC_PROTO_RC5_SZ, "rc-5-sz", 0x2fff, "rc-5-sz" },
  42         { RC_PROTO_JVC, "jvc", 0xffff, "jvc" },
  43         { RC_PROTO_SONY12, "sony-12", 0x1f007f, "sony" },
  44         { RC_PROTO_SONY15, "sony-15", 0xff007f, "sony" },
  45         { RC_PROTO_SONY20, "sony-20", 0x1fff7f, "sony" },
  46         { RC_PROTO_NEC, "nec", 0xffff, "nec" },
  47         { RC_PROTO_NECX, "nec-x", 0xffffff, "nec" },
  48         { RC_PROTO_NEC32, "nec-32", 0xffffffff, "nec" },
  49         { RC_PROTO_SANYO, "sanyo", 0x1fffff, "sanyo" },
  50         { RC_PROTO_RC6_0, "rc-6-0", 0xffff, "rc-6" },
  51         { RC_PROTO_RC6_6A_20, "rc-6-6a-20", 0xfffff, "rc-6" },
  52         { RC_PROTO_RC6_6A_24, "rc-6-6a-24", 0xffffff, "rc-6" },
  53         { RC_PROTO_RC6_6A_32, "rc-6-6a-32", 0xffffffff, "rc-6" },
  54         { RC_PROTO_RC6_MCE, "rc-6-mce", 0x00007fff, "rc-6" },
  55         { RC_PROTO_SHARP, "sharp", 0x1fff, "sharp" },
  56         { RC_PROTO_IMON, "imon", 0x7fffffff, "imon" },
  57         { RC_PROTO_RCMM12, "rcmm-12", 0x00000fff, "rc-mm" },
  58         { RC_PROTO_RCMM24, "rcmm-24", 0x00ffffff, "rc-mm" },
  59         { RC_PROTO_RCMM32, "rcmm-32", 0xffffffff, "rc-mm" },
  60 };
  61 
  62 int lirc_open(const char *rc)
  63 {
  64         struct dirent *dent;
  65         char buf[SYSFS_PATH_MAX + DNAME_PATH_MAX];
  66         DIR *d;
  67         int fd;
  68 
  69         snprintf(buf, sizeof(buf), "/sys/class/rc/%s", rc);
  70 
  71         d = opendir(buf);
  72         if (!d)
  73                 ksft_exit_fail_msg("cannot open %s: %m\n", buf);
  74 
  75         while ((dent = readdir(d)) != NULL) {
  76                 if (!strncmp(dent->d_name, "lirc", 4)) {
  77                         snprintf(buf, sizeof(buf), "/dev/%s", dent->d_name);
  78                         break;
  79                 }
  80         }
  81 
  82         if (!dent)
  83                 ksft_exit_skip("cannot find lirc device for %s\n", rc);
  84 
  85         closedir(d);
  86 
  87         fd = open(buf, O_RDWR | O_NONBLOCK);
  88         if (fd == -1)
  89                 ksft_exit_fail_msg("cannot open: %s: %m\n", buf);
  90 
  91         return fd;
  92 }
  93 
  94 int main(int argc, char **argv)
  95 {
  96         unsigned int mode;
  97         char buf[100];
  98         int rlircfd, wlircfd, protocolfd, i, n;
  99 
 100         srand(time(NULL));
 101 
 102         if (argc != 3)
 103                 ksft_exit_fail_msg("Usage: %s <write rcN> <read rcN>\n",
 104                                    argv[0]);
 105 
 106         rlircfd = lirc_open(argv[2]);
 107         mode = LIRC_MODE_SCANCODE;
 108         if (ioctl(rlircfd, LIRC_SET_REC_MODE, &mode))
 109                 ksft_exit_fail_msg("failed to set scancode rec mode %s: %m\n",
 110                                    argv[2]);
 111 
 112         wlircfd = lirc_open(argv[1]);
 113         if (ioctl(wlircfd, LIRC_SET_SEND_MODE, &mode))
 114                 ksft_exit_fail_msg("failed to set scancode send mode %s: %m\n",
 115                                    argv[1]);
 116 
 117         snprintf(buf, sizeof(buf), "/sys/class/rc/%s/protocols", argv[2]);
 118         protocolfd = open(buf, O_WRONLY);
 119         if (protocolfd == -1)
 120                 ksft_exit_fail_msg("failed to open %s: %m\n", buf);
 121 
 122         printf("Sending IR on %s and receiving IR on %s.\n", argv[1], argv[2]);
 123 
 124         for (i = 0; i < ARRAY_SIZE(protocols); i++) {
 125                 if (write(protocolfd, protocols[i].decoder,
 126                           strlen(protocols[i].decoder)) == -1)
 127                         ksft_exit_fail_msg("failed to set write decoder\n");
 128 
 129                 printf("Testing protocol %s for decoder %s (%d/%d)...\n",
 130                        protocols[i].name, protocols[i].decoder,
 131                        i + 1, (int)ARRAY_SIZE(protocols));
 132 
 133                 for (n = 0; n < TEST_SCANCODES; n++) {
 134                         unsigned int scancode = rand() & protocols[i].mask;
 135                         unsigned int rc_proto = protocols[i].proto;
 136 
 137                         if (rc_proto == RC_PROTO_RC6_MCE)
 138                                 scancode |= 0x800f0000;
 139 
 140                         if (rc_proto == RC_PROTO_NECX &&
 141                             (((scancode >> 16) ^ ~(scancode >> 8)) & 0xff) == 0)
 142                                 continue;
 143 
 144                         if (rc_proto == RC_PROTO_NEC32 &&
 145                             (((scancode >> 8) ^ ~scancode) & 0xff) == 0)
 146                                 continue;
 147 
 148                         if (rc_proto == RC_PROTO_RCMM32 &&
 149                             (scancode & 0x000c0000) != 0x000c0000 &&
 150                             scancode & 0x00008000)
 151                                 continue;
 152 
 153                         struct lirc_scancode lsc = {
 154                                 .rc_proto = rc_proto,
 155                                 .scancode = scancode
 156                         };
 157 
 158                         printf("Testing scancode:%x\n", scancode);
 159 
 160                         while (write(wlircfd, &lsc, sizeof(lsc)) < 0) {
 161                                 if (errno == EINTR)
 162                                         continue;
 163 
 164                                 ksft_exit_fail_msg("failed to send ir: %m\n");
 165                         }
 166 
 167                         struct pollfd pfd = { .fd = rlircfd, .events = POLLIN };
 168                         struct lirc_scancode lsc2;
 169 
 170                         poll(&pfd, 1, 1000);
 171 
 172                         bool decoded = true;
 173 
 174                         while (read(rlircfd, &lsc2, sizeof(lsc2)) < 0) {
 175                                 if (errno == EINTR)
 176                                         continue;
 177 
 178                                 ksft_test_result_error("no scancode decoded: %m\n");
 179                                 decoded = false;
 180                                 break;
 181                         }
 182 
 183                         if (!decoded)
 184                                 continue;
 185 
 186                         if (lsc.rc_proto != lsc2.rc_proto)
 187                                 ksft_test_result_error("decoded protocol is different: %d\n",
 188                                                        lsc2.rc_proto);
 189 
 190                         else if (lsc.scancode != lsc2.scancode)
 191                                 ksft_test_result_error("decoded scancode is different: %llx\n",
 192                                                        lsc2.scancode);
 193                         else
 194                                 ksft_inc_pass_cnt();
 195                 }
 196 
 197                 printf("OK\n");
 198         }
 199 
 200         close(rlircfd);
 201         close(wlircfd);
 202         close(protocolfd);
 203 
 204         if (ksft_get_fail_cnt() > 0)
 205                 ksft_exit_fail();
 206         else
 207                 ksft_exit_pass();
 208 
 209         return 0;
 210 }

/* [<][>][^][v][top][bottom][index][help] */