sound/arm/aaci.h

/* [<][>][^][v][top][bottom][index][help] */
   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  *  linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
   4  *
   5  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
   6  */
   7 #ifndef AACI_H
   8 #define AACI_H
   9 
  10 /*
  11  * Control and status register offsets
  12  *  P39.
  13  */
  14 #define AACI_CSCH1      0x000
  15 #define AACI_CSCH2      0x014
  16 #define AACI_CSCH3      0x028
  17 #define AACI_CSCH4      0x03c
  18 
  19 #define AACI_RXCR       0x000   /* 29 bits Control Rx FIFO */
  20 #define AACI_TXCR       0x004   /* 17 bits Control Tx FIFO */
  21 #define AACI_SR         0x008   /* 12 bits Status */
  22 #define AACI_ISR        0x00c   /* 7 bits  Int Status */
  23 #define AACI_IE         0x010   /* 7 bits  Int Enable */
  24 
  25 /*
  26  * Other registers
  27  */
  28 #define AACI_SL1RX      0x050
  29 #define AACI_SL1TX      0x054
  30 #define AACI_SL2RX      0x058
  31 #define AACI_SL2TX      0x05c
  32 #define AACI_SL12RX     0x060
  33 #define AACI_SL12TX     0x064
  34 #define AACI_SLFR       0x068   /* slot flags */
  35 #define AACI_SLISTAT    0x06c   /* slot interrupt status */
  36 #define AACI_SLIEN      0x070   /* slot interrupt enable */
  37 #define AACI_INTCLR     0x074   /* interrupt clear */
  38 #define AACI_MAINCR     0x078   /* main control */
  39 #define AACI_RESET      0x07c   /* reset control */
  40 #define AACI_SYNC       0x080   /* sync control */
  41 #define AACI_ALLINTS    0x084   /* all fifo interrupt status */
  42 #define AACI_MAINFR     0x088   /* main flag register */
  43 #define AACI_DR1        0x090   /* data read/written fifo 1 */
  44 #define AACI_DR2        0x0b0   /* data read/written fifo 2 */
  45 #define AACI_DR3        0x0d0   /* data read/written fifo 3 */
  46 #define AACI_DR4        0x0f0   /* data read/written fifo 4 */
  47 
  48 /*
  49  * TX/RX fifo control register (CR). P48
  50  */
  51 #define CR_FEN          (1 << 16)       /* fifo enable */
  52 #define CR_COMPACT      (1 << 15)       /* compact mode */
  53 #define CR_SZ16         (0 << 13)       /* 16 bits */
  54 #define CR_SZ18         (1 << 13)       /* 18 bits */
  55 #define CR_SZ20         (2 << 13)       /* 20 bits */
  56 #define CR_SZ12         (3 << 13)       /* 12 bits */
  57 #define CR_SL12         (1 << 12)
  58 #define CR_SL11         (1 << 11)
  59 #define CR_SL10         (1 << 10)
  60 #define CR_SL9          (1 << 9)
  61 #define CR_SL8          (1 << 8)
  62 #define CR_SL7          (1 << 7)
  63 #define CR_SL6          (1 << 6)
  64 #define CR_SL5          (1 << 5)
  65 #define CR_SL4          (1 << 4)
  66 #define CR_SL3          (1 << 3)
  67 #define CR_SL2          (1 << 2)
  68 #define CR_SL1          (1 << 1)
  69 #define CR_EN           (1 << 0)        /* transmit enable */
  70 
  71 /*
  72  * status register bits. P49
  73  */
  74 #define SR_RXTOFE       (1 << 11)       /* rx timeout fifo empty */
  75 #define SR_TXTO         (1 << 10)       /* rx timeout fifo nonempty */
  76 #define SR_TXU          (1 << 9)        /* tx underrun */
  77 #define SR_RXO          (1 << 8)        /* rx overrun */
  78 #define SR_TXB          (1 << 7)        /* tx busy */
  79 #define SR_RXB          (1 << 6)        /* rx busy */
  80 #define SR_TXFF         (1 << 5)        /* tx fifo full */
  81 #define SR_RXFF         (1 << 4)        /* rx fifo full */
  82 #define SR_TXHE         (1 << 3)        /* tx fifo half empty */
  83 #define SR_RXHF         (1 << 2)        /* rx fifo half full */
  84 #define SR_TXFE         (1 << 1)        /* tx fifo empty */
  85 #define SR_RXFE         (1 << 0)        /* rx fifo empty */
  86 
  87 /*
  88  * interrupt status register bits.
  89  */
  90 #define ISR_RXTOFEINTR  (1 << 6)        /* rx fifo empty */
  91 #define ISR_URINTR      (1 << 5)        /* tx underflow */
  92 #define ISR_ORINTR      (1 << 4)        /* rx overflow */
  93 #define ISR_RXINTR      (1 << 3)        /* rx fifo */
  94 #define ISR_TXINTR      (1 << 2)        /* tx fifo intr */
  95 #define ISR_RXTOINTR    (1 << 1)        /* tx timeout */
  96 #define ISR_TXCINTR     (1 << 0)        /* tx complete */
  97 
  98 /*
  99  * interrupt enable register bits.
 100  */
 101 #define IE_RXTOIE       (1 << 6)
 102 #define IE_URIE         (1 << 5)
 103 #define IE_ORIE         (1 << 4)
 104 #define IE_RXIE         (1 << 3)
 105 #define IE_TXIE         (1 << 2)
 106 #define IE_RXTIE        (1 << 1)
 107 #define IE_TXCIE        (1 << 0)
 108 
 109 /*
 110  * interrupt status. P51
 111  */
 112 #define ISR_RXTOFE      (1 << 6)        /* rx timeout fifo empty */
 113 #define ISR_UR          (1 << 5)        /* tx fifo underrun */
 114 #define ISR_OR          (1 << 4)        /* rx fifo overrun */
 115 #define ISR_RX          (1 << 3)        /* rx interrupt status */
 116 #define ISR_TX          (1 << 2)        /* tx interrupt status */
 117 #define ISR_RXTO        (1 << 1)        /* rx timeout */
 118 #define ISR_TXC         (1 << 0)        /* tx complete */
 119 
 120 /*
 121  * interrupt enable. P52
 122  */
 123 #define IE_RXTOFE       (1 << 6)        /* rx timeout fifo empty */
 124 #define IE_UR           (1 << 5)        /* tx fifo underrun */
 125 #define IE_OR           (1 << 4)        /* rx fifo overrun */
 126 #define IE_RX           (1 << 3)        /* rx interrupt status */
 127 #define IE_TX           (1 << 2)        /* tx interrupt status */
 128 #define IE_RXTO         (1 << 1)        /* rx timeout */
 129 #define IE_TXC          (1 << 0)        /* tx complete */
 130 
 131 /*
 132  * slot flag register bits. P56
 133  */
 134 #define SLFR_RWIS       (1 << 13)       /* raw wake-up interrupt status */
 135 #define SLFR_RGPIOINTR  (1 << 12)       /* raw gpio interrupt */
 136 #define SLFR_12TXE      (1 << 11)       /* slot 12 tx empty */
 137 #define SLFR_12RXV      (1 << 10)       /* slot 12 rx valid */
 138 #define SLFR_2TXE       (1 << 9)        /* slot 2 tx empty */
 139 #define SLFR_2RXV       (1 << 8)        /* slot 2 rx valid */
 140 #define SLFR_1TXE       (1 << 7)        /* slot 1 tx empty */
 141 #define SLFR_1RXV       (1 << 6)        /* slot 1 rx valid */
 142 #define SLFR_12TXB      (1 << 5)        /* slot 12 tx busy */
 143 #define SLFR_12RXB      (1 << 4)        /* slot 12 rx busy */
 144 #define SLFR_2TXB       (1 << 3)        /* slot 2 tx busy */
 145 #define SLFR_2RXB       (1 << 2)        /* slot 2 rx busy */
 146 #define SLFR_1TXB       (1 << 1)        /* slot 1 tx busy */
 147 #define SLFR_1RXB       (1 << 0)        /* slot 1 rx busy */
 148 
 149 /*
 150  * Interrupt clear register.
 151  */
 152 #define ICLR_RXTOFEC4   (1 << 12)
 153 #define ICLR_RXTOFEC3   (1 << 11)
 154 #define ICLR_RXTOFEC2   (1 << 10)
 155 #define ICLR_RXTOFEC1   (1 << 9)
 156 #define ICLR_TXUEC4     (1 << 8)
 157 #define ICLR_TXUEC3     (1 << 7)
 158 #define ICLR_TXUEC2     (1 << 6)
 159 #define ICLR_TXUEC1     (1 << 5)
 160 #define ICLR_RXOEC4     (1 << 4)
 161 #define ICLR_RXOEC3     (1 << 3)
 162 #define ICLR_RXOEC2     (1 << 2)
 163 #define ICLR_RXOEC1     (1 << 1)
 164 #define ICLR_WISC       (1 << 0)
 165 
 166 /*
 167  * Main control register bits. P62
 168  */
 169 #define MAINCR_SCRA(x)  ((x) << 10)     /* secondary codec reg access */
 170 #define MAINCR_DMAEN    (1 << 9)        /* dma enable */
 171 #define MAINCR_SL12TXEN (1 << 8)        /* slot 12 transmit enable */
 172 #define MAINCR_SL12RXEN (1 << 7)        /* slot 12 receive enable */
 173 #define MAINCR_SL2TXEN  (1 << 6)        /* slot 2 transmit enable */
 174 #define MAINCR_SL2RXEN  (1 << 5)        /* slot 2 receive enable */
 175 #define MAINCR_SL1TXEN  (1 << 4)        /* slot 1 transmit enable */
 176 #define MAINCR_SL1RXEN  (1 << 3)        /* slot 1 receive enable */
 177 #define MAINCR_LPM      (1 << 2)        /* low power mode */
 178 #define MAINCR_LOOPBK   (1 << 1)        /* loopback */
 179 #define MAINCR_IE       (1 << 0)        /* aaci interface enable */
 180 
 181 /*
 182  * Reset register bits. P65
 183  */
 184 #define RESET_NRST      (1 << 0)
 185 
 186 /*
 187  * Sync register bits. P65
 188  */
 189 #define SYNC_FORCE      (1 << 0)
 190 
 191 /*
 192  * Main flag register bits. P66
 193  */
 194 #define MAINFR_TXB      (1 << 1)        /* transmit busy */
 195 #define MAINFR_RXB      (1 << 0)        /* receive busy */
 196 
 197 
 198 
 199 struct aaci_runtime {
 200         void                    __iomem *base;
 201         void                    __iomem *fifo;
 202         spinlock_t              lock;
 203 
 204         struct ac97_pcm         *pcm;
 205         int                     pcm_open;
 206 
 207         u32                     cr;
 208         struct snd_pcm_substream        *substream;
 209 
 210         unsigned int            period; /* byte size of a "period" */
 211 
 212         /*
 213          * PIO support
 214          */
 215         void                    *start;
 216         void                    *end;
 217         void                    *ptr;
 218         int                     bytes;
 219         unsigned int            fifo_bytes;
 220 };
 221 
 222 struct aaci {
 223         struct amba_device      *dev;
 224         struct snd_card         *card;
 225         void                    __iomem *base;
 226         unsigned int            fifo_depth;
 227         unsigned int            users;
 228         struct mutex            irq_lock;
 229 
 230         /* AC'97 */
 231         struct mutex            ac97_sem;
 232         struct snd_ac97_bus     *ac97_bus;
 233         struct snd_ac97         *ac97;
 234 
 235         u32                     maincr;
 236 
 237         struct aaci_runtime     playback;
 238         struct aaci_runtime     capture;
 239 
 240         struct snd_pcm          *pcm;
 241 };
 242 
 243 #define ACSTREAM_FRONT          0
 244 #define ACSTREAM_SURROUND       1
 245 #define ACSTREAM_LFE            2
 246 
 247 #endif
/* [<][>][^][v][top][bottom][index][help] */
root/sound/arm/aaci.h

INCLUDED FROM
