sound/arm/pxa2xx-ac97-lib.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
pxa2xx_ac97_read
pxa2xx_ac97_write
pxa_ac97_warm_pxa25x
pxa_ac97_cold_pxa25x
pxa_ac97_warm_pxa27x
pxa_ac97_cold_pxa27x
pxa_ac97_warm_pxa3xx
pxa_ac97_cold_pxa3xx
pxa2xx_ac97_try_warm_reset
pxa2xx_ac97_try_cold_reset
pxa2xx_ac97_finish_reset
pxa2xx_ac97_irq
pxa2xx_ac97_hw_suspend
pxa2xx_ac97_hw_resume
pxa2xx_ac97_hw_probe
pxa2xx_ac97_hw_remove
   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
   4  * which contain:
   5  *
   6  * Author:      Nicolas Pitre
   7  * Created:     Dec 02, 2004
   8  * Copyright:   MontaVista Software Inc.
   9  */
  10 
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/interrupt.h>
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/module.h>
  17 #include <linux/io.h>
  18 #include <linux/gpio.h>
  19 #include <linux/of_gpio.h>
  20 
  21 #include <sound/pxa2xx-lib.h>
  22 
  23 #include <mach/irqs.h>
  24 #include <mach/regs-ac97.h>
  25 #include <mach/audio.h>
  26 
  27 static DEFINE_MUTEX(car_mutex);
  28 static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
  29 static volatile long gsr_bits;
  30 static struct clk *ac97_clk;
  31 static struct clk *ac97conf_clk;
  32 static int reset_gpio;
  33 
  34 extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio);
  35 
  36 /*
  37  * Beware PXA27x bugs:
  38  *
  39  *   o Slot 12 read from modem space will hang controller.
  40  *   o CDONE, SDONE interrupt fails after any slot 12 IO.
  41  *
  42  * We therefore have an hybrid approach for waiting on SDONE (interrupt or
  43  * 1 jiffy timeout if interrupt never comes).
  44  */
  45 
  46 int pxa2xx_ac97_read(int slot, unsigned short reg)
  47 {
  48         int val = -ENODEV;
  49         volatile u32 *reg_addr;
  50 
  51         if (slot > 0)
  52                 return -ENODEV;
  53 
  54         mutex_lock(&car_mutex);
  55 
  56         /* set up primary or secondary codec space */
  57         if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
  58                 reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE;
  59         else
  60                 reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE;
  61         reg_addr += (reg >> 1);
  62 
  63         /* start read access across the ac97 link */
  64         GSR = GSR_CDONE | GSR_SDONE;
  65         gsr_bits = 0;
  66         val = (*reg_addr & 0xffff);
  67         if (reg == AC97_GPIO_STATUS)
  68                 goto out;
  69         if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
  70             !((GSR | gsr_bits) & GSR_SDONE)) {
  71                 printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
  72                                 __func__, reg, GSR | gsr_bits);
  73                 val = -ETIMEDOUT;
  74                 goto out;
  75         }
  76 
  77         /* valid data now */
  78         GSR = GSR_CDONE | GSR_SDONE;
  79         gsr_bits = 0;
  80         val = (*reg_addr & 0xffff);
  81         /* but we've just started another cycle... */
  82         wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
  83 
  84 out:    mutex_unlock(&car_mutex);
  85         return val;
  86 }
  87 EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);
  88 
  89 int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val)
  90 {
  91         volatile u32 *reg_addr;
  92         int ret = 0;
  93 
  94         mutex_lock(&car_mutex);
  95 
  96         /* set up primary or secondary codec space */
  97         if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
  98                 reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE;
  99         else
 100                 reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE;
 101         reg_addr += (reg >> 1);
 102 
 103         GSR = GSR_CDONE | GSR_SDONE;
 104         gsr_bits = 0;
 105         *reg_addr = val;
 106         if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
 107             !((GSR | gsr_bits) & GSR_CDONE)) {
 108                 printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
 109                                 __func__, reg, GSR | gsr_bits);
 110                 ret = -EIO;
 111         }
 112 
 113         mutex_unlock(&car_mutex);
 114         return ret;
 115 }
 116 EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
 117 
 118 #ifdef CONFIG_PXA25x
 119 static inline void pxa_ac97_warm_pxa25x(void)
 120 {
 121         gsr_bits = 0;
 122 
 123         GCR |= GCR_WARM_RST;
 124 }
 125 
 126 static inline void pxa_ac97_cold_pxa25x(void)
 127 {
 128         GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 129         GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 130 
 131         gsr_bits = 0;
 132 
 133         GCR = GCR_COLD_RST;
 134 }
 135 #endif
 136 
 137 #ifdef CONFIG_PXA27x
 138 static inline void pxa_ac97_warm_pxa27x(void)
 139 {
 140         gsr_bits = 0;
 141 
 142         /* warm reset broken on Bulverde, so manually keep AC97 reset high */
 143         pxa27x_configure_ac97reset(reset_gpio, true);
 144         udelay(10);
 145         GCR |= GCR_WARM_RST;
 146         pxa27x_configure_ac97reset(reset_gpio, false);
 147         udelay(500);
 148 }
 149 
 150 static inline void pxa_ac97_cold_pxa27x(void)
 151 {
 152         GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 153         GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 154 
 155         gsr_bits = 0;
 156 
 157         /* PXA27x Developers Manual section 13.5.2.2.1 */
 158         clk_prepare_enable(ac97conf_clk);
 159         udelay(5);
 160         clk_disable_unprepare(ac97conf_clk);
 161         GCR = GCR_COLD_RST | GCR_WARM_RST;
 162 }
 163 #endif
 164 
 165 #ifdef CONFIG_PXA3xx
 166 static inline void pxa_ac97_warm_pxa3xx(void)
 167 {
 168         gsr_bits = 0;
 169 
 170         /* Can't use interrupts */
 171         GCR |= GCR_WARM_RST;
 172 }
 173 
 174 static inline void pxa_ac97_cold_pxa3xx(void)
 175 {
 176         /* Hold CLKBPB for 100us */
 177         GCR = 0;
 178         GCR = GCR_CLKBPB;
 179         udelay(100);
 180         GCR = 0;
 181 
 182         GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 183         GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 184 
 185         gsr_bits = 0;
 186 
 187         /* Can't use interrupts on PXA3xx */
 188         GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
 189 
 190         GCR = GCR_WARM_RST | GCR_COLD_RST;
 191 }
 192 #endif
 193 
 194 bool pxa2xx_ac97_try_warm_reset(void)
 195 {
 196         unsigned long gsr;
 197         unsigned int timeout = 100;
 198 
 199 #ifdef CONFIG_PXA25x
 200         if (cpu_is_pxa25x())
 201                 pxa_ac97_warm_pxa25x();
 202         else
 203 #endif
 204 #ifdef CONFIG_PXA27x
 205         if (cpu_is_pxa27x())
 206                 pxa_ac97_warm_pxa27x();
 207         else
 208 #endif
 209 #ifdef CONFIG_PXA3xx
 210         if (cpu_is_pxa3xx())
 211                 pxa_ac97_warm_pxa3xx();
 212         else
 213 #endif
 214                 snd_BUG();
 215 
 216         while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
 217                 mdelay(1);
 218 
 219         gsr = GSR | gsr_bits;
 220         if (!(gsr & (GSR_PCR | GSR_SCR))) {
 221                 printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
 222                                  __func__, gsr);
 223 
 224                 return false;
 225         }
 226 
 227         return true;
 228 }
 229 EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
 230 
 231 bool pxa2xx_ac97_try_cold_reset(void)
 232 {
 233         unsigned long gsr;
 234         unsigned int timeout = 1000;
 235 
 236 #ifdef CONFIG_PXA25x
 237         if (cpu_is_pxa25x())
 238                 pxa_ac97_cold_pxa25x();
 239         else
 240 #endif
 241 #ifdef CONFIG_PXA27x
 242         if (cpu_is_pxa27x())
 243                 pxa_ac97_cold_pxa27x();
 244         else
 245 #endif
 246 #ifdef CONFIG_PXA3xx
 247         if (cpu_is_pxa3xx())
 248                 pxa_ac97_cold_pxa3xx();
 249         else
 250 #endif
 251                 snd_BUG();
 252 
 253         while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
 254                 mdelay(1);
 255 
 256         gsr = GSR | gsr_bits;
 257         if (!(gsr & (GSR_PCR | GSR_SCR))) {
 258                 printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
 259                                  __func__, gsr);
 260 
 261                 return false;
 262         }
 263 
 264         return true;
 265 }
 266 EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);
 267 
 268 
 269 void pxa2xx_ac97_finish_reset(void)
 270 {
 271         GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
 272         GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
 273 }
 274 EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);
 275 
 276 static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
 277 {
 278         long status;
 279 
 280         status = GSR;
 281         if (status) {
 282                 GSR = status;
 283                 gsr_bits |= status;
 284                 wake_up(&gsr_wq);
 285 
 286                 /* Although we don't use those we still need to clear them
 287                    since they tend to spuriously trigger when MMC is used
 288                    (hardware bug? go figure)... */
 289                 if (cpu_is_pxa27x()) {
 290                         MISR = MISR_EOC;
 291                         PISR = PISR_EOC;
 292                         MCSR = MCSR_EOC;
 293                 }
 294 
 295                 return IRQ_HANDLED;
 296         }
 297 
 298         return IRQ_NONE;
 299 }
 300 
 301 #ifdef CONFIG_PM
 302 int pxa2xx_ac97_hw_suspend(void)
 303 {
 304         GCR |= GCR_ACLINK_OFF;
 305         clk_disable_unprepare(ac97_clk);
 306         return 0;
 307 }
 308 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
 309 
 310 int pxa2xx_ac97_hw_resume(void)
 311 {
 312         clk_prepare_enable(ac97_clk);
 313         return 0;
 314 }
 315 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
 316 #endif
 317 
 318 int pxa2xx_ac97_hw_probe(struct platform_device *dev)
 319 {
 320         int ret;
 321         pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
 322 
 323         if (pdata) {
 324                 switch (pdata->reset_gpio) {
 325                 case 95:
 326                 case 113:
 327                         reset_gpio = pdata->reset_gpio;
 328                         break;
 329                 case 0:
 330                         reset_gpio = 113;
 331                         break;
 332                 case -1:
 333                         break;
 334                 default:
 335                         dev_err(&dev->dev, "Invalid reset GPIO %d\n",
 336                                 pdata->reset_gpio);
 337                 }
 338         } else if (!pdata && dev->dev.of_node) {
 339                 pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
 340                 if (!pdata)
 341                         return -ENOMEM;
 342                 pdata->reset_gpio = of_get_named_gpio(dev->dev.of_node,
 343                                                       "reset-gpios", 0);
 344                 if (pdata->reset_gpio == -ENOENT)
 345                         pdata->reset_gpio = -1;
 346                 else if (pdata->reset_gpio < 0)
 347                         return pdata->reset_gpio;
 348                 reset_gpio = pdata->reset_gpio;
 349         } else {
 350                 if (cpu_is_pxa27x())
 351                         reset_gpio = 113;
 352         }
 353 
 354         if (cpu_is_pxa27x()) {
 355                 /*
 356                  * This gpio is needed for a work-around to a bug in the ac97
 357                  * controller during warm reset.  The direction and level is set
 358                  * here so that it is an output driven high when switching from
 359                  * AC97_nRESET alt function to generic gpio.
 360                  */
 361                 ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH,
 362                                        "pxa27x ac97 reset");
 363                 if (ret < 0) {
 364                         pr_err("%s: gpio_request_one() failed: %d\n",
 365                                __func__, ret);
 366                         goto err_conf;
 367                 }
 368                 pxa27x_configure_ac97reset(reset_gpio, false);
 369 
 370                 ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 371                 if (IS_ERR(ac97conf_clk)) {
 372                         ret = PTR_ERR(ac97conf_clk);
 373                         ac97conf_clk = NULL;
 374                         goto err_conf;
 375                 }
 376         }
 377 
 378         ac97_clk = clk_get(&dev->dev, "AC97CLK");
 379         if (IS_ERR(ac97_clk)) {
 380                 ret = PTR_ERR(ac97_clk);
 381                 ac97_clk = NULL;
 382                 goto err_clk;
 383         }
 384 
 385         ret = clk_prepare_enable(ac97_clk);
 386         if (ret)
 387                 goto err_clk2;
 388 
 389         ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL);
 390         if (ret < 0)
 391                 goto err_irq;
 392 
 393         return 0;
 394 
 395 err_irq:
 396         GCR |= GCR_ACLINK_OFF;
 397 err_clk2:
 398         clk_put(ac97_clk);
 399         ac97_clk = NULL;
 400 err_clk:
 401         if (ac97conf_clk) {
 402                 clk_put(ac97conf_clk);
 403                 ac97conf_clk = NULL;
 404         }
 405 err_conf:
 406         return ret;
 407 }
 408 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
 409 
 410 void pxa2xx_ac97_hw_remove(struct platform_device *dev)
 411 {
 412         if (cpu_is_pxa27x())
 413                 gpio_free(reset_gpio);
 414         GCR |= GCR_ACLINK_OFF;
 415         free_irq(IRQ_AC97, NULL);
 416         if (ac97conf_clk) {
 417                 clk_put(ac97conf_clk);
 418                 ac97conf_clk = NULL;
 419         }
 420         clk_disable_unprepare(ac97_clk);
 421         clk_put(ac97_clk);
 422         ac97_clk = NULL;
 423 }
 424 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);
 425 
 426 MODULE_AUTHOR("Nicolas Pitre");
 427 MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
 428 MODULE_LICENSE("GPL");
 429
/* [<][>][^][v][top][bottom][index][help] */
root/sound/arm/pxa2xx-ac97-lib.c

DEFINITIONS
