root/arch/openrisc/kernel/setup.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. setup_memory
  2. print_cpuinfo
  3. setup_find_cpu_node
  4. setup_cpuinfo
  5. or32_early_setup
  6. extract_value_bits
  7. extract_value
  8. detect_unit_config
  9. calibrate_delay
  10. setup_arch
  11. show_cpuinfo
  12. c_start
  13. c_next
  14. c_stop

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * OpenRISC setup.c
   4  *
   5  * Linux architectural port borrowing liberally from similar works of
   6  * others.  All original copyrights apply as per the original source
   7  * declaration.
   8  *
   9  * Modifications for the OpenRISC architecture:
  10  * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
  11  * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
  12  *
  13  * This file handles the architecture-dependent parts of initialization
  14  */
  15 
  16 #include <linux/errno.h>
  17 #include <linux/sched.h>
  18 #include <linux/kernel.h>
  19 #include <linux/mm.h>
  20 #include <linux/stddef.h>
  21 #include <linux/unistd.h>
  22 #include <linux/ptrace.h>
  23 #include <linux/slab.h>
  24 #include <linux/tty.h>
  25 #include <linux/ioport.h>
  26 #include <linux/delay.h>
  27 #include <linux/console.h>
  28 #include <linux/init.h>
  29 #include <linux/memblock.h>
  30 #include <linux/seq_file.h>
  31 #include <linux/serial.h>
  32 #include <linux/initrd.h>
  33 #include <linux/of_fdt.h>
  34 #include <linux/of.h>
  35 #include <linux/device.h>
  36 
  37 #include <asm/sections.h>
  38 #include <asm/pgtable.h>
  39 #include <asm/types.h>
  40 #include <asm/setup.h>
  41 #include <asm/io.h>
  42 #include <asm/cpuinfo.h>
  43 #include <asm/delay.h>
  44 
  45 #include "vmlinux.h"
  46 
  47 static void __init setup_memory(void)
  48 {
  49         unsigned long ram_start_pfn;
  50         unsigned long ram_end_pfn;
  51         phys_addr_t memory_start, memory_end;
  52         struct memblock_region *region;
  53 
  54         memory_end = memory_start = 0;
  55 
  56         /* Find main memory where is the kernel, we assume its the only one */
  57         for_each_memblock(memory, region) {
  58                 memory_start = region->base;
  59                 memory_end = region->base + region->size;
  60                 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
  61                        memory_start, memory_end);
  62         }
  63 
  64         if (!memory_end) {
  65                 panic("No memory!");
  66         }
  67 
  68         ram_start_pfn = PFN_UP(memory_start);
  69         ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
  70 
  71         /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
  72         min_low_pfn = ram_start_pfn;
  73         max_low_pfn = ram_end_pfn;
  74         max_pfn = ram_end_pfn;
  75 
  76         /*
  77          * initialize the boot-time allocator (with low memory only).
  78          *
  79          * This makes the memory from the end of the kernel to the end of
  80          * RAM usable.
  81          */
  82         memblock_reserve(__pa(_stext), _end - _stext);
  83 
  84         early_init_fdt_reserve_self();
  85         early_init_fdt_scan_reserved_mem();
  86 
  87         memblock_dump_all();
  88 }
  89 
  90 struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
  91 
  92 static void print_cpuinfo(void)
  93 {
  94         unsigned long upr = mfspr(SPR_UPR);
  95         unsigned long vr = mfspr(SPR_VR);
  96         unsigned int version;
  97         unsigned int revision;
  98         struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
  99 
 100         version = (vr & SPR_VR_VER) >> 24;
 101         revision = (vr & SPR_VR_REV);
 102 
 103         printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
 104                version, revision, cpuinfo->clock_frequency / 1000000);
 105 
 106         if (!(upr & SPR_UPR_UP)) {
 107                 printk(KERN_INFO
 108                        "-- no UPR register... unable to detect configuration\n");
 109                 return;
 110         }
 111 
 112         if (upr & SPR_UPR_DCP)
 113                 printk(KERN_INFO
 114                        "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
 115                        cpuinfo->dcache_size, cpuinfo->dcache_block_size,
 116                        cpuinfo->dcache_ways);
 117         else
 118                 printk(KERN_INFO "-- dcache disabled\n");
 119         if (upr & SPR_UPR_ICP)
 120                 printk(KERN_INFO
 121                        "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
 122                        cpuinfo->icache_size, cpuinfo->icache_block_size,
 123                        cpuinfo->icache_ways);
 124         else
 125                 printk(KERN_INFO "-- icache disabled\n");
 126 
 127         if (upr & SPR_UPR_DMP)
 128                 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
 129                        1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
 130                        1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
 131         if (upr & SPR_UPR_IMP)
 132                 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
 133                        1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
 134                        1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
 135 
 136         printk(KERN_INFO "-- additional features:\n");
 137         if (upr & SPR_UPR_DUP)
 138                 printk(KERN_INFO "-- debug unit\n");
 139         if (upr & SPR_UPR_PCUP)
 140                 printk(KERN_INFO "-- performance counters\n");
 141         if (upr & SPR_UPR_PMP)
 142                 printk(KERN_INFO "-- power management\n");
 143         if (upr & SPR_UPR_PICP)
 144                 printk(KERN_INFO "-- PIC\n");
 145         if (upr & SPR_UPR_TTP)
 146                 printk(KERN_INFO "-- timer\n");
 147         if (upr & SPR_UPR_CUP)
 148                 printk(KERN_INFO "-- custom unit(s)\n");
 149 }
 150 
 151 static struct device_node *setup_find_cpu_node(int cpu)
 152 {
 153         u32 hwid;
 154         struct device_node *cpun;
 155 
 156         for_each_of_cpu_node(cpun) {
 157                 if (of_property_read_u32(cpun, "reg", &hwid))
 158                         continue;
 159                 if (hwid == cpu)
 160                         return cpun;
 161         }
 162 
 163         return NULL;
 164 }
 165 
 166 void __init setup_cpuinfo(void)
 167 {
 168         struct device_node *cpu;
 169         unsigned long iccfgr, dccfgr;
 170         unsigned long cache_set_size;
 171         int cpu_id = smp_processor_id();
 172         struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
 173 
 174         cpu = setup_find_cpu_node(cpu_id);
 175         if (!cpu)
 176                 panic("Couldn't find CPU%d in device tree...\n", cpu_id);
 177 
 178         iccfgr = mfspr(SPR_ICCFGR);
 179         cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
 180         cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
 181         cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
 182         cpuinfo->icache_size =
 183             cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
 184 
 185         dccfgr = mfspr(SPR_DCCFGR);
 186         cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
 187         cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
 188         cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
 189         cpuinfo->dcache_size =
 190             cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
 191 
 192         if (of_property_read_u32(cpu, "clock-frequency",
 193                                  &cpuinfo->clock_frequency)) {
 194                 printk(KERN_WARNING
 195                        "Device tree missing CPU 'clock-frequency' parameter."
 196                        "Assuming frequency 25MHZ"
 197                        "This is probably not what you want.");
 198         }
 199 
 200         cpuinfo->coreid = mfspr(SPR_COREID);
 201 
 202         of_node_put(cpu);
 203 
 204         print_cpuinfo();
 205 }
 206 
 207 /**
 208  * or32_early_setup
 209  *
 210  * Handles the pointer to the device tree that this kernel is to use
 211  * for establishing the available platform devices.
 212  *
 213  * Falls back on built-in device tree in case null pointer is passed.
 214  */
 215 
 216 void __init or32_early_setup(void *fdt)
 217 {
 218         if (fdt)
 219                 pr_info("FDT at %p\n", fdt);
 220         else {
 221                 fdt = __dtb_start;
 222                 pr_info("Compiled-in FDT at %p\n", fdt);
 223         }
 224         early_init_devtree(fdt);
 225 }
 226 
 227 static inline unsigned long extract_value_bits(unsigned long reg,
 228                                                short bit_nr, short width)
 229 {
 230         return (reg >> bit_nr) & (0 << width);
 231 }
 232 
 233 static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
 234 {
 235         while (!(mask & 0x1)) {
 236                 reg = reg >> 1;
 237                 mask = mask >> 1;
 238         }
 239         return mask & reg;
 240 }
 241 
 242 void __init detect_unit_config(unsigned long upr, unsigned long mask,
 243                                char *text, void (*func) (void))
 244 {
 245         if (text != NULL)
 246                 printk("%s", text);
 247 
 248         if (upr & mask) {
 249                 if (func != NULL)
 250                         func();
 251                 else
 252                         printk("present\n");
 253         } else
 254                 printk("not present\n");
 255 }
 256 
 257 /*
 258  * calibrate_delay
 259  *
 260  * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
 261  * from the clock frequency passed in via the device tree
 262  *
 263  */
 264 
 265 void calibrate_delay(void)
 266 {
 267         const int *val;
 268         struct device_node *cpu = setup_find_cpu_node(smp_processor_id());
 269 
 270         val = of_get_property(cpu, "clock-frequency", NULL);
 271         if (!val)
 272                 panic("no cpu 'clock-frequency' parameter in device tree");
 273         loops_per_jiffy = *val / HZ;
 274         pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
 275                 loops_per_jiffy / (500000 / HZ),
 276                 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
 277 }
 278 
 279 void __init setup_arch(char **cmdline_p)
 280 {
 281         unflatten_and_copy_device_tree();
 282 
 283         setup_cpuinfo();
 284 
 285 #ifdef CONFIG_SMP
 286         smp_init_cpus();
 287 #endif
 288 
 289         /* process 1's initial memory region is the kernel code/data */
 290         init_mm.start_code = (unsigned long)_stext;
 291         init_mm.end_code = (unsigned long)_etext;
 292         init_mm.end_data = (unsigned long)_edata;
 293         init_mm.brk = (unsigned long)_end;
 294 
 295 #ifdef CONFIG_BLK_DEV_INITRD
 296         initrd_start = (unsigned long)&__initrd_start;
 297         initrd_end = (unsigned long)&__initrd_end;
 298         if (initrd_start == initrd_end) {
 299                 initrd_start = 0;
 300                 initrd_end = 0;
 301         }
 302         initrd_below_start_ok = 1;
 303 #endif
 304 
 305         /* setup memblock allocator */
 306         setup_memory();
 307 
 308         /* paging_init() sets up the MMU and marks all pages as reserved */
 309         paging_init();
 310 
 311 #if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
 312         if (!conswitchp)
 313                 conswitchp = &dummy_con;
 314 #endif
 315 
 316         *cmdline_p = boot_command_line;
 317 
 318         printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
 319 }
 320 
 321 static int show_cpuinfo(struct seq_file *m, void *v)
 322 {
 323         unsigned int vr, cpucfgr;
 324         unsigned int avr;
 325         unsigned int version;
 326         struct cpuinfo_or1k *cpuinfo = v;
 327 
 328         vr = mfspr(SPR_VR);
 329         cpucfgr = mfspr(SPR_CPUCFGR);
 330 
 331 #ifdef CONFIG_SMP
 332         seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
 333 #endif
 334         if (vr & SPR_VR_UVRP) {
 335                 vr = mfspr(SPR_VR2);
 336                 version = vr & SPR_VR2_VER;
 337                 avr = mfspr(SPR_AVR);
 338                 seq_printf(m, "cpu architecture\t: "
 339                            "OpenRISC 1000 (%d.%d-rev%d)\n",
 340                            (avr >> 24) & 0xff,
 341                            (avr >> 16) & 0xff,
 342                            (avr >> 8) & 0xff);
 343                 seq_printf(m, "cpu implementation id\t: 0x%x\n",
 344                            (vr & SPR_VR2_CPUID) >> 24);
 345                 seq_printf(m, "cpu version\t\t: 0x%x\n", version);
 346         } else {
 347                 version = (vr & SPR_VR_VER) >> 24;
 348                 seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
 349                 seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
 350         }
 351         seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
 352         seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
 353         seq_printf(m, "dcache block size\t: %d bytes\n",
 354                    cpuinfo->dcache_block_size);
 355         seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
 356         seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
 357         seq_printf(m, "icache block size\t: %d bytes\n",
 358                    cpuinfo->icache_block_size);
 359         seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
 360         seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
 361                    1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
 362                    1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
 363         seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
 364                    1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
 365                    1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
 366         seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
 367                    (loops_per_jiffy * HZ) / 500000,
 368                    ((loops_per_jiffy * HZ) / 5000) % 100);
 369 
 370         seq_puts(m, "features\t\t: ");
 371         seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
 372         seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
 373         seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
 374         seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
 375         seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
 376         seq_puts(m, "\n");
 377 
 378         seq_puts(m, "\n");
 379 
 380         return 0;
 381 }
 382 
 383 static void *c_start(struct seq_file *m, loff_t *pos)
 384 {
 385         *pos = cpumask_next(*pos - 1, cpu_online_mask);
 386         if ((*pos) < nr_cpu_ids)
 387                 return &cpuinfo_or1k[*pos];
 388         return NULL;
 389 }
 390 
 391 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 392 {
 393         (*pos)++;
 394         return c_start(m, pos);
 395 }
 396 
 397 static void c_stop(struct seq_file *m, void *v)
 398 {
 399 }
 400 
 401 const struct seq_operations cpuinfo_op = {
 402         .start = c_start,
 403         .next = c_next,
 404         .stop = c_stop,
 405         .show = show_cpuinfo,
 406 };

/* [<][>][^][v][top][bottom][index][help] */