root/arch/parisc/include/uapi/asm/pdc.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
   2 #ifndef _UAPI_PARISC_PDC_H
   3 #define _UAPI_PARISC_PDC_H
   4 
   5 /*
   6  *      PDC return values ...
   7  *      All PDC calls return a subset of these errors. 
   8  */
   9 
  10 #define PDC_WARN                  3     /* Call completed with a warning */
  11 #define PDC_REQ_ERR_1             2     /* See above                     */
  12 #define PDC_REQ_ERR_0             1     /* Call would generate a requestor error */
  13 #define PDC_OK                    0     /* Call completed successfully  */
  14 #define PDC_BAD_PROC             -1     /* Called non-existent procedure*/
  15 #define PDC_BAD_OPTION           -2     /* Called with non-existent option */
  16 #define PDC_ERROR                -3     /* Call could not complete without an error */
  17 #define PDC_NE_MOD               -5     /* Module not found             */
  18 #define PDC_NE_CELL_MOD          -7     /* Cell module not found        */
  19 #define PDC_NE_BOOTDEV           -9     /* Cannot locate a console device or boot device */
  20 #define PDC_INVALID_ARG         -10     /* Called with an invalid argument */
  21 #define PDC_BUS_POW_WARN        -12     /* Call could not complete in allowed power budget */
  22 #define PDC_NOT_NARROW          -17     /* Narrow mode not supported    */
  23 
  24 /*
  25  *      PDC entry points...
  26  */
  27 
  28 #define PDC_POW_FAIL    1               /* perform a power-fail         */
  29 #define PDC_POW_FAIL_PREPARE    0       /* prepare for powerfail        */
  30 
  31 #define PDC_CHASSIS     2               /* PDC-chassis functions        */
  32 #define PDC_CHASSIS_DISP        0       /* update chassis display       */
  33 #define PDC_CHASSIS_WARN        1       /* return chassis warnings      */
  34 #define PDC_CHASSIS_DISPWARN    2       /* update&return chassis status */
  35 #define PDC_RETURN_CHASSIS_INFO 128     /* HVERSION dependent: return chassis LED/LCD info  */
  36 
  37 #define PDC_PIM         3               /* Get PIM data                 */
  38 #define PDC_PIM_HPMC            0       /* Transfer HPMC data           */
  39 #define PDC_PIM_RETURN_SIZE     1       /* Get Max buffer needed for PIM*/
  40 #define PDC_PIM_LPMC            2       /* Transfer HPMC data           */
  41 #define PDC_PIM_SOFT_BOOT       3       /* Transfer Soft Boot data      */
  42 #define PDC_PIM_TOC             4       /* Transfer TOC data            */
  43 
  44 #define PDC_MODEL       4               /* PDC model information call   */
  45 #define PDC_MODEL_INFO          0       /* returns information          */
  46 #define PDC_MODEL_BOOTID        1       /* set the BOOT_ID              */
  47 #define PDC_MODEL_VERSIONS      2       /* returns cpu-internal versions*/
  48 #define PDC_MODEL_SYSMODEL      3       /* return system model info     */
  49 #define PDC_MODEL_ENSPEC        4       /* enable specific option       */
  50 #define PDC_MODEL_DISPEC        5       /* disable specific option      */
  51 #define PDC_MODEL_CPU_ID        6       /* returns cpu-id (only newer machines!) */
  52 #define PDC_MODEL_CAPABILITIES  7       /* returns OS32/OS64-flags      */
  53 /* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
  54 #define  PDC_MODEL_OS64                 (1 << 0)
  55 #define  PDC_MODEL_OS32                 (1 << 1)
  56 #define  PDC_MODEL_IOPDIR_FDC           (1 << 2)
  57 #define  PDC_MODEL_NVA_MASK             (3 << 4)
  58 #define  PDC_MODEL_NVA_SUPPORTED        (0 << 4)
  59 #define  PDC_MODEL_NVA_SLOW             (1 << 4)
  60 #define  PDC_MODEL_NVA_UNSUPPORTED      (3 << 4)
  61 #define PDC_MODEL_GET_BOOT__OP  8       /* returns boot test options    */
  62 #define PDC_MODEL_SET_BOOT__OP  9       /* set boot test options        */
  63 #define PDC_MODEL_GET_PLATFORM_INFO 10  /* returns platform info        */
  64 #define PDC_MODEL_GET_INSTALL_KERNEL 11 /* returns kernel for installation */
  65 
  66 #define PA89_INSTRUCTION_SET    0x4     /* capabilities returned        */
  67 #define PA90_INSTRUCTION_SET    0x8
  68 
  69 #define PDC_CACHE       5               /* return/set cache (& TLB) info*/
  70 #define PDC_CACHE_INFO          0       /* returns information          */
  71 #define PDC_CACHE_SET_COH       1       /* set coherence state          */
  72 #define PDC_CACHE_RET_SPID      2       /* returns space-ID bits        */
  73 
  74 #define PDC_HPA         6               /* return HPA of processor      */
  75 #define PDC_HPA_PROCESSOR       0
  76 #define PDC_HPA_MODULES         1
  77 
  78 #define PDC_COPROC      7               /* Co-Processor (usually FP unit(s)) */
  79 #define PDC_COPROC_CFG          0       /* Co-Processor Cfg (FP unit(s) enabled?) */
  80 
  81 #define PDC_IODC        8               /* talk to IODC                 */
  82 #define PDC_IODC_READ           0       /* read IODC entry point        */
  83 /*      PDC_IODC_RI_                     * INDEX parameter of PDC_IODC_READ */
  84 #define PDC_IODC_RI_DATA_BYTES  0       /* IODC Data Bytes              */
  85 /*                              1, 2       obsolete - HVERSION dependent*/
  86 #define PDC_IODC_RI_INIT        3       /* Initialize module            */
  87 #define PDC_IODC_RI_IO          4       /* Module input/output          */
  88 #define PDC_IODC_RI_SPA         5       /* Module input/output          */
  89 #define PDC_IODC_RI_CONFIG      6       /* Module input/output          */
  90 /*                              7         obsolete - HVERSION dependent */
  91 #define PDC_IODC_RI_TEST        8       /* Module input/output          */
  92 #define PDC_IODC_RI_TLB         9       /* Module input/output          */
  93 #define PDC_IODC_NINIT          2       /* non-destructive init         */
  94 #define PDC_IODC_DINIT          3       /* destructive init             */
  95 #define PDC_IODC_MEMERR         4       /* check for memory errors      */
  96 #define PDC_IODC_INDEX_DATA     0       /* get first 16 bytes from mod IODC */
  97 #define PDC_IODC_BUS_ERROR      -4      /* bus error return value       */
  98 #define PDC_IODC_INVALID_INDEX  -5      /* invalid index return value   */
  99 #define PDC_IODC_COUNT          -6      /* count is too small           */
 100 
 101 #define PDC_TOD         9               /* time-of-day clock (TOD)      */
 102 #define PDC_TOD_READ            0       /* read TOD                     */
 103 #define PDC_TOD_WRITE           1       /* write TOD                    */
 104 #define PDC_TOD_CALIBRATE       2       /* calibrate timers             */
 105 
 106 #define PDC_STABLE      10              /* stable storage (sprockets)   */
 107 #define PDC_STABLE_READ         0
 108 #define PDC_STABLE_WRITE        1
 109 #define PDC_STABLE_RETURN_SIZE  2
 110 #define PDC_STABLE_VERIFY_CONTENTS 3
 111 #define PDC_STABLE_INITIALIZE   4
 112 
 113 #define PDC_NVOLATILE   11              /* often not implemented        */
 114 #define PDC_NVOLATILE_READ      0
 115 #define PDC_NVOLATILE_WRITE     1
 116 #define PDC_NVOLATILE_RETURN_SIZE 2
 117 #define PDC_NVOLATILE_VERIFY_CONTENTS 3
 118 #define PDC_NVOLATILE_INITIALIZE 4
 119 
 120 #define PDC_ADD_VALID   12              /* Memory validation PDC call   */
 121 #define PDC_ADD_VALID_VERIFY    0       /* Make PDC_ADD_VALID verify region */
 122 
 123 #define PDC_DEBUG       14              /* Obsolete                     */
 124 
 125 #define PDC_INSTR       15              /* get instr to invoke PDCE_CHECK() */
 126 
 127 #define PDC_PROC        16              /* (sprockets)                  */
 128 
 129 #define PDC_CONFIG      17              /* (sprockets)                  */
 130 #define PDC_CONFIG_DECONFIG     0
 131 #define PDC_CONFIG_DRECONFIG    1
 132 #define PDC_CONFIG_DRETURN_CONFIG 2
 133 
 134 #define PDC_BLOCK_TLB   18              /* manage hardware block-TLB    */
 135 #define PDC_BTLB_INFO           0       /* returns parameter            */
 136 #define PDC_BTLB_INSERT         1       /* insert BTLB entry            */
 137 #define PDC_BTLB_PURGE          2       /* purge BTLB entries           */
 138 #define PDC_BTLB_PURGE_ALL      3       /* purge all BTLB entries       */
 139 
 140 #define PDC_TLB         19              /* manage hardware TLB miss handling */
 141 #define PDC_TLB_INFO            0       /* returns parameter            */
 142 #define PDC_TLB_SETUP           1       /* set up miss handling         */
 143 
 144 #define PDC_MEM         20              /* Manage memory                */
 145 #define PDC_MEM_MEMINFO         0       /* Return PDT info              */
 146 #define PDC_MEM_ADD_PAGE        1       /* Add page to PDT              */
 147 #define PDC_MEM_CLEAR_PDT       2       /* Clear PDT                    */
 148 #define PDC_MEM_READ_PDT        3       /* Read PDT entry               */
 149 #define PDC_MEM_RESET_CLEAR     4       /* Reset PDT clear flag         */
 150 #define PDC_MEM_GOODMEM         5       /* Set good_mem value           */
 151 #define PDC_MEM_TABLE           128     /* Non contig mem map (sprockets) */
 152 #define PDC_MEM_RETURN_ADDRESS_TABLE    PDC_MEM_TABLE
 153 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE   131
 154 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES        132
 155 #define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
 156 
 157 #define PDC_MEM_RET_SBE_REPLACED        5       /* PDC_MEM return values */
 158 #define PDC_MEM_RET_DUPLICATE_ENTRY     4
 159 #define PDC_MEM_RET_BUF_SIZE_SMALL      1
 160 #define PDC_MEM_RET_PDT_FULL            -11
 161 #define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
 162 
 163 #define PDC_PSW         21              /* Get/Set default System Mask  */
 164 #define PDC_PSW_MASK            0       /* Return mask                  */
 165 #define PDC_PSW_GET_DEFAULTS    1       /* Return defaults              */
 166 #define PDC_PSW_SET_DEFAULTS    2       /* Set default                  */
 167 #define PDC_PSW_ENDIAN_BIT      1       /* set for big endian           */
 168 #define PDC_PSW_WIDE_BIT        2       /* set for wide mode            */ 
 169 
 170 #define PDC_SYSTEM_MAP  22              /* find system modules          */
 171 #define PDC_FIND_MODULE         0
 172 #define PDC_FIND_ADDRESS        1
 173 #define PDC_TRANSLATE_PATH      2
 174 
 175 #define PDC_SOFT_POWER  23              /* soft power switch            */
 176 #define PDC_SOFT_POWER_INFO     0       /* return info about the soft power switch */
 177 #define PDC_SOFT_POWER_ENABLE   1       /* enable/disable soft power switch */
 178 
 179 #define PDC_ALLOC       24              /* allocate static storage for PDC & IODC */
 180 
 181 #define PDC_CRASH_PREP  25              /* Prepare system for crash dump */
 182 #define PDC_CRASH_DUMP          0       /* Do platform specific preparations for dump */
 183 #define PDC_CRASH_LOG_CEC_ERROR 1       /* Dump hardware registers      */
 184 
 185 #define PDC_SCSI_PARMS  26              /* Get and set SCSI parameters  */
 186 #define PDC_SCSI_GET_PARMS      0       /* Get SCSI parameters for I/O device */
 187 #define PDC_SCSI_SET_PARMS      1       /* Set SCSI parameters for I/O device */
 188 
 189 /* HVERSION dependent */
 190 
 191 /* The PDC_MEM_MAP calls */
 192 #define PDC_MEM_MAP     128             /* on s700: return page info    */
 193 #define PDC_MEM_MAP_HPA         0       /* returns hpa of a module      */
 194 
 195 #define PDC_EEPROM      129             /* EEPROM access                */
 196 #define PDC_EEPROM_READ_WORD    0
 197 #define PDC_EEPROM_WRITE_WORD   1
 198 #define PDC_EEPROM_READ_BYTE    2
 199 #define PDC_EEPROM_WRITE_BYTE   3
 200 #define PDC_EEPROM_EEPROM_PASSWORD -1000
 201 
 202 #define PDC_NVM         130             /* NVM (non-volatile memory) access */
 203 #define PDC_NVM_READ_WORD       0
 204 #define PDC_NVM_WRITE_WORD      1
 205 #define PDC_NVM_READ_BYTE       2
 206 #define PDC_NVM_WRITE_BYTE      3
 207 
 208 #define PDC_SEED_ERROR  132             /* (sprockets)                  */
 209 
 210 #define PDC_IO          135             /* log error info, reset IO system */
 211 #define PDC_IO_READ_AND_CLEAR_ERRORS    0
 212 #define PDC_IO_RESET                    1
 213 #define PDC_IO_RESET_DEVICES            2
 214 /* sets bits 6&7 (little endian) of the HcControl Register */
 215 #define PDC_IO_USB_SUSPEND      0xC000000000000000
 216 #define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5      /* return value */
 217 #define PDC_IO_NO_SUSPEND               -6      /* return value */
 218 
 219 #define PDC_BROADCAST_RESET 136         /* reset all processors         */
 220 #define PDC_DO_RESET            0       /* option: perform a broadcast reset */
 221 #define PDC_DO_FIRM_TEST_RESET  1       /* Do broadcast reset with bitmap */
 222 #define PDC_BR_RECONFIGURATION  2       /* reset w/reconfiguration      */
 223 #define PDC_FIRM_TEST_MAGIC     0xab9ec36fUL    /* for this reboot only */
 224 
 225 #define PDC_LAN_STATION_ID 138          /* Hversion dependent mechanism for */
 226 #define PDC_LAN_STATION_ID_READ 0       /* getting the lan station address  */
 227 
 228 #define PDC_LAN_STATION_ID_SIZE 6
 229 
 230 #define PDC_CHECK_RANGES 139            /* (sprockets)                  */
 231 
 232 #define PDC_NV_SECTIONS 141             /* (sprockets)                  */
 233 
 234 #define PDC_PERFORMANCE 142             /* performance monitoring       */
 235 
 236 #define PDC_SYSTEM_INFO 143             /* system information           */
 237 #define PDC_SYSINFO_RETURN_INFO_SIZE    0
 238 #define PDC_SYSINFO_RRETURN_SYS_INFO    1
 239 #define PDC_SYSINFO_RRETURN_ERRORS      2
 240 #define PDC_SYSINFO_RRETURN_WARNINGS    3
 241 #define PDC_SYSINFO_RETURN_REVISIONS    4
 242 #define PDC_SYSINFO_RRETURN_DIAGNOSE    5
 243 #define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
 244 
 245 #define PDC_RDR         144             /* (sprockets)                  */
 246 #define PDC_RDR_READ_BUFFER     0
 247 #define PDC_RDR_READ_SINGLE     1
 248 #define PDC_RDR_WRITE_SINGLE    2
 249 
 250 #define PDC_INTRIGUE    145             /* (sprockets)                  */
 251 #define PDC_INTRIGUE_WRITE_BUFFER        0
 252 #define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
 253 #define PDC_INTRIGUE_START_CPU_COUNTERS  2
 254 #define PDC_INTRIGUE_STOP_CPU_COUNTERS   3
 255 
 256 #define PDC_STI         146             /* STI access                   */
 257 /* same as PDC_PCI_XXX values (see below) */
 258 
 259 /* Legacy PDC definitions for same stuff */
 260 #define PDC_PCI_INDEX   147
 261 #define PDC_PCI_INTERFACE_INFO          0
 262 #define PDC_PCI_SLOT_INFO               1
 263 #define PDC_PCI_INFLIGHT_BYTES          2
 264 #define PDC_PCI_READ_CONFIG             3
 265 #define PDC_PCI_WRITE_CONFIG            4
 266 #define PDC_PCI_READ_PCI_IO             5
 267 #define PDC_PCI_WRITE_PCI_IO            6
 268 #define PDC_PCI_READ_CONFIG_DELAY       7
 269 #define PDC_PCI_UPDATE_CONFIG_DELAY     8
 270 #define PDC_PCI_PCI_PATH_TO_PCI_HPA     9
 271 #define PDC_PCI_PCI_HPA_TO_PCI_PATH     10
 272 #define PDC_PCI_PCI_PATH_TO_PCI_BUS     11
 273 #define PDC_PCI_PCI_RESERVED            12
 274 #define PDC_PCI_PCI_INT_ROUTE_SIZE      13
 275 #define PDC_PCI_GET_INT_TBL_SIZE        PDC_PCI_PCI_INT_ROUTE_SIZE
 276 #define PDC_PCI_PCI_INT_ROUTE           14
 277 #define PDC_PCI_GET_INT_TBL             PDC_PCI_PCI_INT_ROUTE 
 278 #define PDC_PCI_READ_MON_TYPE           15
 279 #define PDC_PCI_WRITE_MON_TYPE          16
 280 
 281 #define PDC_RELOCATE    149             /* (sprockets)                  */
 282 #define PDC_RELOCATE_GET_RELOCINFO      0
 283 #define PDC_RELOCATE_CHECKSUM           1
 284 #define PDC_RELOCATE_RELOCATE           2
 285 
 286 /* Get SCSI Interface Card info:  SDTR, SCSI ID, mode (SE vs LVD) */
 287 #define PDC_INITIATOR   163
 288 #define PDC_GET_INITIATOR       0
 289 #define PDC_SET_INITIATOR       1
 290 #define PDC_DELETE_INITIATOR    2
 291 #define PDC_RETURN_TABLE_SIZE   3
 292 #define PDC_RETURN_TABLE        4
 293 
 294 #define PDC_LINK        165             /* (sprockets)                  */
 295 #define PDC_LINK_PCI_ENTRY_POINTS       0  /* list (Arg1) = 0 */
 296 #define PDC_LINK_USB_ENTRY_POINTS       1  /* list (Arg1) = 1 */
 297 
 298 /* cl_class
 299  * page 3-33 of IO-Firmware ARS
 300  * IODC ENTRY_INIT(Search first) RET[1]
 301  */
 302 #define CL_NULL         0       /* invalid */
 303 #define CL_RANDOM       1       /* random access (as disk) */
 304 #define CL_SEQU         2       /* sequential access (as tape) */
 305 #define CL_DUPLEX       7       /* full-duplex point-to-point (RS-232, Net) */
 306 #define CL_KEYBD        8       /* half-duplex console (HIL Keyboard) */
 307 #define CL_DISPL        9       /* half-duplex console (display) */
 308 #define CL_FC           10      /* FiberChannel access media */
 309 
 310 /* IODC ENTRY_INIT() */
 311 #define ENTRY_INIT_SRCH_FRST    2
 312 #define ENTRY_INIT_SRCH_NEXT    3
 313 #define ENTRY_INIT_MOD_DEV      4
 314 #define ENTRY_INIT_DEV          5
 315 #define ENTRY_INIT_MOD          6
 316 #define ENTRY_INIT_MSG          9
 317 
 318 /* IODC ENTRY_IO() */
 319 #define ENTRY_IO_BOOTIN         0
 320 #define ENTRY_IO_BOOTOUT        1
 321 #define ENTRY_IO_CIN            2
 322 #define ENTRY_IO_COUT           3
 323 #define ENTRY_IO_CLOSE          4
 324 #define ENTRY_IO_GETMSG         9
 325 #define ENTRY_IO_BBLOCK_IN      16
 326 #define ENTRY_IO_BBLOCK_OUT     17
 327 
 328 /* IODC ENTRY_SPA() */
 329 
 330 /* IODC ENTRY_CONFIG() */
 331 
 332 /* IODC ENTRY_TEST() */
 333 
 334 /* IODC ENTRY_TLB() */
 335 
 336 /* constants for OS (NVM...) */
 337 #define OS_ID_NONE              0       /* Undefined OS ID      */
 338 #define OS_ID_HPUX              1       /* HP-UX OS             */
 339 #define OS_ID_MPEXL             2       /* MPE XL OS            */
 340 #define OS_ID_OSF               3       /* OSF OS               */
 341 #define OS_ID_HPRT              4       /* HP-RT OS             */
 342 #define OS_ID_NOVEL             5       /* NOVELL OS            */
 343 #define OS_ID_LINUX             6       /* Linux                */
 344 
 345 
 346 /* constants for PDC_CHASSIS */
 347 #define OSTAT_OFF               0
 348 #define OSTAT_FLT               1 
 349 #define OSTAT_TEST              2
 350 #define OSTAT_INIT              3
 351 #define OSTAT_SHUT              4
 352 #define OSTAT_WARN              5
 353 #define OSTAT_RUN               6
 354 #define OSTAT_ON                7
 355 
 356 /* Page Zero constant offsets used by the HPMC handler */
 357 #define BOOT_CONSOLE_HPA_OFFSET  0x3c0
 358 #define BOOT_CONSOLE_SPA_OFFSET  0x3c4
 359 #define BOOT_CONSOLE_PATH_OFFSET 0x3a8
 360 
 361 /* size of the pdc_result buffer for firmware.c */
 362 #define NUM_PDC_RESULT  32
 363 
 364 #if !defined(__ASSEMBLY__)
 365 
 366 /* flags of the device_path */
 367 #define PF_AUTOBOOT     0x80
 368 #define PF_AUTOSEARCH   0x40
 369 #define PF_TIMER        0x0F
 370 
 371 struct device_path {            /* page 1-69 */
 372         unsigned char flags;    /* flags see above! */
 373         unsigned char bc[6];    /* bus converter routing info */
 374         unsigned char mod;
 375         unsigned int  layers[6];/* device-specific layer-info */
 376 } __attribute__((aligned(8))) ;
 377 
 378 struct pz_device {
 379         struct  device_path dp; /* see above */
 380         /* struct       iomod *hpa; */
 381         unsigned int hpa;       /* HPA base address */
 382         /* char *spa; */
 383         unsigned int spa;       /* SPA base address */
 384         /* int  (*iodc_io)(struct iomod*, ...); */
 385         unsigned int iodc_io;   /* device entry point */
 386         short   pad;            /* reserved */
 387         unsigned short cl_class;/* see below */
 388 } __attribute__((aligned(8))) ;
 389 
 390 struct zeropage {
 391         /* [0x000] initialize vectors (VEC) */
 392         unsigned int    vec_special;            /* must be zero */
 393         /* int  (*vec_pow_fail)(void);*/
 394         unsigned int    vec_pow_fail; /* power failure handler */
 395         /* int  (*vec_toc)(void); */
 396         unsigned int    vec_toc;
 397         unsigned int    vec_toclen;
 398         /* int  (*vec_rendz)(void); */
 399         unsigned int vec_rendz;
 400         int     vec_pow_fail_flen;
 401         int     vec_pad[10];            
 402         
 403         /* [0x040] reserved processor dependent */
 404         int     pad0[112];
 405 
 406         /* [0x200] reserved */
 407         int     pad1[84];
 408 
 409         /* [0x350] memory configuration (MC) */
 410         int     memc_cont;              /* contiguous mem size (bytes) */
 411         int     memc_phsize;            /* physical memory size */
 412         int     memc_adsize;            /* additional mem size, bytes of SPA space used by PDC */
 413         unsigned int mem_pdc_hi;        /* used for 64-bit */
 414 
 415         /* [0x360] various parameters for the boot-CPU */
 416         /* unsigned int *mem_booterr[8]; */
 417         unsigned int mem_booterr[8];    /* ptr to boot errors */
 418         unsigned int mem_free;          /* first location, where OS can be loaded */
 419         /* struct iomod *mem_hpa; */
 420         unsigned int mem_hpa;           /* HPA of the boot-CPU */
 421         /* int (*mem_pdc)(int, ...); */
 422         unsigned int mem_pdc;           /* PDC entry point */
 423         unsigned int mem_10msec;        /* number of clock ticks in 10msec */
 424 
 425         /* [0x390] initial memory module (IMM) */
 426         /* struct iomod *imm_hpa; */
 427         unsigned int imm_hpa;           /* HPA of the IMM */
 428         int     imm_soft_boot;          /* 0 = was hard boot, 1 = was soft boot */
 429         unsigned int    imm_spa_size;           /* SPA size of the IMM in bytes */
 430         unsigned int    imm_max_mem;            /* bytes of mem in IMM */
 431 
 432         /* [0x3A0] boot console, display device and keyboard */
 433         struct pz_device mem_cons;      /* description of console device */
 434         struct pz_device mem_boot;      /* description of boot device */
 435         struct pz_device mem_kbd;       /* description of keyboard device */
 436 
 437         /* [0x430] reserved */
 438         int     pad430[116];
 439 
 440         /* [0x600] processor dependent */
 441         unsigned int pad600[1];
 442         unsigned int proc_sti;          /* pointer to STI ROM */
 443         unsigned int pad608[126];
 444 };
 445 
 446 struct pdc_chassis_info {       /* for PDC_CHASSIS_INFO */
 447         unsigned long actcnt;   /* actual number of bytes returned */
 448         unsigned long maxcnt;   /* maximum number of bytes that could be returned */
 449 };
 450 
 451 struct pdc_coproc_cfg {         /* for PDC_COPROC_CFG */
 452         unsigned long ccr_functional;
 453         unsigned long ccr_present;
 454         unsigned long revision;
 455         unsigned long model;
 456 };
 457 
 458 struct pdc_model {              /* for PDC_MODEL */
 459         unsigned long hversion;
 460         unsigned long sversion;
 461         unsigned long hw_id;
 462         unsigned long boot_id;
 463         unsigned long sw_id;
 464         unsigned long sw_cap;
 465         unsigned long arch_rev;
 466         unsigned long pot_key;
 467         unsigned long curr_key;
 468 };
 469 
 470 struct pdc_cache_cf {           /* for PDC_CACHE  (I/D-caches) */
 471     unsigned long
 472 #ifdef __LP64__
 473                 cc_padW:32,
 474 #endif
 475                 cc_alias: 4,    /* alias boundaries for virtual addresses   */
 476                 cc_block: 4,    /* to determine most efficient stride */
 477                 cc_line : 3,    /* maximum amount written back as a result of store (multiple of 16 bytes) */
 478                 cc_shift: 2,    /* how much to shift cc_block left */
 479                 cc_wt   : 1,    /* 0 = WT-Dcache, 1 = WB-Dcache */
 480                 cc_sh   : 2,    /* 0 = separate I/D-cache, else shared I/D-cache */
 481                 cc_cst  : 3,    /* 0 = incoherent D-cache, 1=coherent D-cache */
 482                 cc_pad1 : 10,   /* reserved */
 483                 cc_hv   : 3;    /* hversion dependent */
 484 };
 485 
 486 struct pdc_tlb_cf {             /* for PDC_CACHE (I/D-TLB's) */
 487     unsigned long tc_pad0:12,   /* reserved */
 488 #ifdef __LP64__
 489                 tc_padW:32,
 490 #endif
 491                 tc_sh   : 2,    /* 0 = separate I/D-TLB, else shared I/D-TLB */
 492                 tc_hv   : 1,    /* HV */
 493                 tc_page : 1,    /* 0 = 2K page-size-machine, 1 = 4k page size */
 494                 tc_cst  : 3,    /* 0 = incoherent operations, else coherent operations */
 495                 tc_aid  : 5,    /* ITLB: width of access ids of processor (encoded!) */
 496                 tc_sr   : 8;    /* ITLB: width of space-registers (encoded) */
 497 };
 498 
 499 struct pdc_cache_info {         /* main-PDC_CACHE-structure (caches & TLB's) */
 500         /* I-cache */
 501         unsigned long   ic_size;        /* size in bytes */
 502         struct pdc_cache_cf ic_conf;    /* configuration */
 503         unsigned long   ic_base;        /* base-addr */
 504         unsigned long   ic_stride;
 505         unsigned long   ic_count;
 506         unsigned long   ic_loop;
 507         /* D-cache */
 508         unsigned long   dc_size;        /* size in bytes */
 509         struct pdc_cache_cf dc_conf;    /* configuration */
 510         unsigned long   dc_base;        /* base-addr */
 511         unsigned long   dc_stride;
 512         unsigned long   dc_count;
 513         unsigned long   dc_loop;
 514         /* Instruction-TLB */
 515         unsigned long   it_size;        /* number of entries in I-TLB */
 516         struct pdc_tlb_cf it_conf;      /* I-TLB-configuration */
 517         unsigned long   it_sp_base;
 518         unsigned long   it_sp_stride;
 519         unsigned long   it_sp_count;
 520         unsigned long   it_off_base;
 521         unsigned long   it_off_stride;
 522         unsigned long   it_off_count;
 523         unsigned long   it_loop;
 524         /* data-TLB */
 525         unsigned long   dt_size;        /* number of entries in D-TLB */
 526         struct pdc_tlb_cf dt_conf;      /* D-TLB-configuration */
 527         unsigned long   dt_sp_base;
 528         unsigned long   dt_sp_stride;
 529         unsigned long   dt_sp_count;
 530         unsigned long   dt_off_base;
 531         unsigned long   dt_off_stride;
 532         unsigned long   dt_off_count;
 533         unsigned long   dt_loop;
 534 };
 535 
 536 /* Might need adjustment to work with 64-bit firmware */
 537 struct pdc_iodc {     /* PDC_IODC */
 538         unsigned char   hversion_model;
 539         unsigned char   hversion;
 540         unsigned char   spa;
 541         unsigned char   type;
 542         unsigned int    sversion_rev:4;
 543         unsigned int    sversion_model:19;
 544         unsigned int    sversion_opt:8;
 545         unsigned char   rev;
 546         unsigned char   dep;
 547         unsigned char   features;
 548         unsigned char   pad1;
 549         unsigned int    checksum:16;
 550         unsigned int    length:16;
 551         unsigned int    pad[15];
 552 } __attribute__((aligned(8))) ;
 553 
 554 /* no BLTBs in pa2.0 processors */
 555 struct pdc_btlb_info_range {
 556         unsigned char res00;
 557         unsigned char num_i;
 558         unsigned char num_d;
 559         unsigned char num_comb;
 560 };
 561 
 562 struct pdc_btlb_info {  /* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
 563         unsigned int min_size;  /* minimum size of BTLB in pages */
 564         unsigned int max_size;  /* maximum size of BTLB in pages */
 565         struct pdc_btlb_info_range fixed_range_info;
 566         struct pdc_btlb_info_range variable_range_info;
 567 };
 568 
 569 struct pdc_mem_retinfo { /* PDC_MEM/PDC_MEM_MEMINFO (return info) */
 570         unsigned long pdt_size;
 571         unsigned long pdt_entries;
 572         unsigned long pdt_status;
 573         unsigned long first_dbe_loc;
 574         unsigned long good_mem;
 575 };
 576 
 577 struct pdc_mem_read_pdt { /* PDC_MEM/PDC_MEM_READ_PDT (return info) */
 578         unsigned long pdt_entries;
 579 };
 580 
 581 #ifdef __LP64__
 582 struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
 583         unsigned long entries_returned;
 584         unsigned long entries_total;
 585 };
 586 
 587 struct pdc_memory_table {       /* PDC_MEM/PDC_MEM_TABLE (arguments) */
 588         unsigned long paddr;
 589         unsigned int  pages;
 590         unsigned int  reserved;
 591 };
 592 #endif /* __LP64__ */
 593 
 594 struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
 595         unsigned long mod_addr;
 596         unsigned long mod_pgs;
 597         unsigned long add_addrs;
 598 };
 599 
 600 struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
 601         unsigned long mod_addr;
 602         unsigned long mod_pgs;
 603 };
 604 
 605 struct pdc_initiator { /* PDC_INITIATOR */
 606         int host_id;
 607         int factor;
 608         int width;
 609         int mode;
 610 };
 611 
 612 struct hardware_path {
 613         char  flags;    /* see bit definitions below */
 614         char  bc[6];    /* Bus Converter routing info to a specific */
 615                         /* I/O adaptor (< 0 means none, > 63 resvd) */
 616         char  mod;      /* fixed field of specified module */
 617 };
 618 
 619 /*
 620  * Device path specifications used by PDC.
 621  */
 622 struct pdc_module_path {
 623         struct hardware_path path;
 624         unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
 625 };
 626 
 627 /* Only used on some pre-PA2.0 boxes */
 628 struct pdc_memory_map {         /* PDC_MEMORY_MAP */
 629         unsigned long hpa;      /* mod's register set address */
 630         unsigned long more_pgs; /* number of additional I/O pgs */
 631 };
 632 
 633 struct pdc_tod {
 634         unsigned long tod_sec;
 635         unsigned long tod_usec;
 636 };
 637 
 638 /* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
 639 
 640 struct pdc_hpmc_pim_11 { /* PDC_PIM */
 641         unsigned int gr[32];
 642         unsigned int cr[32];
 643         unsigned int sr[8];
 644         unsigned int iasq_back;
 645         unsigned int iaoq_back;
 646         unsigned int check_type;
 647         unsigned int cpu_state;
 648         unsigned int rsvd1;
 649         unsigned int cache_check;
 650         unsigned int tlb_check;
 651         unsigned int bus_check;
 652         unsigned int assists_check;
 653         unsigned int rsvd2;
 654         unsigned int assist_state;
 655         unsigned int responder_addr;
 656         unsigned int requestor_addr;
 657         unsigned int path_info;
 658         unsigned long long fr[32];
 659 };
 660 
 661 /*
 662  * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
 663  *
 664  * Note that PDC_PIM doesn't care whether or not wide mode was enabled
 665  * so the results are different on  PA1.1 vs. PA2.0 when in narrow mode.
 666  *
 667  * Note also that there are unarchitected results available, which
 668  * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
 669  * the firmware is probably the best way of printing hversion dependent
 670  * data.
 671  */
 672 
 673 struct pdc_hpmc_pim_20 { /* PDC_PIM */
 674         unsigned long long gr[32];
 675         unsigned long long cr[32];
 676         unsigned long long sr[8];
 677         unsigned long long iasq_back;
 678         unsigned long long iaoq_back;
 679         unsigned int check_type;
 680         unsigned int cpu_state;
 681         unsigned int cache_check;
 682         unsigned int tlb_check;
 683         unsigned int bus_check;
 684         unsigned int assists_check;
 685         unsigned int assist_state;
 686         unsigned int path_info;
 687         unsigned long long responder_addr;
 688         unsigned long long requestor_addr;
 689         unsigned long long fr[32];
 690 };
 691 
 692 #endif /* !defined(__ASSEMBLY__) */
 693 
 694 #endif /* _UAPI_PARISC_PDC_H */

/* [<][>][^][v][top][bottom][index][help] */