root/arch/arm/mach-s3c24xx/iotiming-s3c2412.c

DEFINITIONS

1. s3c2412_print_timing
2. to_div
3. calc_timing
4. s3c2412_calc_bank
5. s3c2412_iotiming_debugfs
6. s3c2412_iotiming_calc
7. s3c2412_iotiming_set
8. s3c2412_decode_timing
9. s3c2412_iotiming_getbank
10. bank_is_io
11. s3c2412_iotiming_get
12. s3c2412_cpufreq_setrefresh

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright (c) 2006-2008 Simtec Electronics
   4 //      http://armlinux.simtec.co.uk/
   5 //      Ben Dooks <ben@simtec.co.uk>
   6 //
   7 // S3C2412/S3C2443 (PL093 based) IO timing support
   8 
   9 #include <linux/init.h>
  10 #include <linux/module.h>
  11 #include <linux/interrupt.h>
  12 #include <linux/ioport.h>
  13 #include <linux/cpufreq.h>
  14 #include <linux/seq_file.h>
  15 #include <linux/device.h>
  16 #include <linux/delay.h>
  17 #include <linux/clk.h>
  18 #include <linux/err.h>
  19 #include <linux/slab.h>
  20 
  21 #include <linux/amba/pl093.h>
  22 
  23 #include <asm/mach/arch.h>
  24 #include <asm/mach/map.h>
  25 
  26 #include <plat/cpu.h>
  27 #include <plat/cpu-freq-core.h>
  28 
  29 #include <mach/s3c2412.h>
  30 
  31 #define print_ns(x) ((x) / 10), ((x) % 10)
  32 
  33 /**
  34  * s3c2412_print_timing - print timing information via printk.
  35  * @pfx: The prefix to print each line with.
  36  * @iot: The IO timing information
  37  */
  38 static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
  39 {
  40         struct s3c2412_iobank_timing *bt;
  41         unsigned int bank;
  42 
  43         for (bank = 0; bank < MAX_BANKS; bank++) {
  44                 bt = iot->bank[bank].io_2412;
  45                 if (!bt)
  46                         continue;
  47 
  48                 printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
  49                        "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
  50                        print_ns(bt->idcy),
  51                        print_ns(bt->wstrd),
  52                        print_ns(bt->wstwr),
  53                        print_ns(bt->wstoen),
  54                        print_ns(bt->wstwen),
  55                        print_ns(bt->wstbrd));
  56         }
  57 }
  58 
  59 /**
  60  * to_div - turn a cycle length into a divisor setting.
  61  * @cyc_tns: The cycle time in 10ths of nanoseconds.
  62  * @clk_tns: The clock period in 10ths of nanoseconds.
  63  */
  64 static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
  65 {
  66         return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
  67 }
  68 
  69 /**
  70  * calc_timing - calculate timing divisor value and check in range.
  71  * @hwtm: The hardware timing in 10ths of nanoseconds.
  72  * @clk_tns: The clock period in 10ths of nanoseconds.
  73  * @err: Pointer to err variable to update in event of failure.
  74  */
  75 static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
  76                                 unsigned int *err)
  77 {
  78         unsigned int ret = to_div(hwtm, clk_tns);
  79 
  80         if (ret > 0xf)
  81                 *err = -EINVAL;
  82 
  83         return ret;
  84 }
  85 
  86 /**
  87  * s3c2412_calc_bank - calculate the bank divisor settings.
  88  * @cfg: The current frequency configuration.
  89  * @bt: The bank timing.
  90  */
  91 static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
  92                              struct s3c2412_iobank_timing *bt)
  93 {
  94         unsigned int hclk = cfg->freq.hclk_tns;
  95         int err = 0;
  96 
  97         bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
  98         bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
  99         bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
 100         bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
 101         bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
 102         bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
 103 
 104         return err;
 105 }
 106 
 107 /**
 108  * s3c2412_iotiming_debugfs - debugfs show io bank timing information
 109  * @seq: The seq_file to write output to using seq_printf().
 110  * @cfg: The current configuration.
 111  * @iob: The IO bank information to decode.
 112 */
 113 void s3c2412_iotiming_debugfs(struct seq_file *seq,
 114                               struct s3c_cpufreq_config *cfg,
 115                               union s3c_iobank *iob)
 116 {
 117         struct s3c2412_iobank_timing *bt = iob->io_2412;
 118 
 119         seq_printf(seq,
 120                    "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
 121                    "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
 122                    print_ns(bt->idcy),
 123                    print_ns(bt->wstrd),
 124                    print_ns(bt->wstwr),
 125                    print_ns(bt->wstoen),
 126                    print_ns(bt->wstwen),
 127                    print_ns(bt->wstbrd));
 128 }
 129 
 130 /**
 131  * s3c2412_iotiming_calc - calculate all the bank divisor settings.
 132  * @cfg: The current frequency configuration.
 133  * @iot: The bank timing information.
 134  *
 135  * Calculate the timing information for all the banks that are
 136  * configured as IO, using s3c2412_calc_bank().
 137  */
 138 int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
 139                           struct s3c_iotimings *iot)
 140 {
 141         struct s3c2412_iobank_timing *bt;
 142         int bank;
 143         int ret;
 144 
 145         for (bank = 0; bank < MAX_BANKS; bank++) {
 146                 bt = iot->bank[bank].io_2412;
 147                 if (!bt)
 148                         continue;
 149 
 150                 ret = s3c2412_calc_bank(cfg, bt);
 151                 if (ret) {
 152                         printk(KERN_ERR "%s: cannot calculate bank %d io\n",
 153                                __func__, bank);
 154                         goto err;
 155                 }
 156         }
 157 
 158         return 0;
 159  err:
 160         return ret;
 161 }
 162 
 163 /**
 164  * s3c2412_iotiming_set - set the timing information
 165  * @cfg: The current frequency configuration.
 166  * @iot: The bank timing information.
 167  *
 168  * Set the IO bank information from the details calculated earlier from
 169  * calling s3c2412_iotiming_calc().
 170  */
 171 void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
 172                           struct s3c_iotimings *iot)
 173 {
 174         struct s3c2412_iobank_timing *bt;
 175         void __iomem *regs;
 176         int bank;
 177 
 178         /* set the io timings from the specifier */
 179 
 180         for (bank = 0; bank < MAX_BANKS; bank++) {
 181                 bt = iot->bank[bank].io_2412;
 182                 if (!bt)
 183                         continue;
 184 
 185                 regs = S3C2412_SSMC_BANK(bank);
 186 
 187                 __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
 188                 __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
 189                 __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
 190                 __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
 191                 __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
 192                 __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
 193         }
 194 }
 195 
 196 static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
 197 {
 198         return (reg & 0xf) * clock;
 199 }
 200 
 201 static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
 202                                      struct s3c2412_iobank_timing *bt,
 203                                      unsigned int bank)
 204 {
 205         unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
 206         void __iomem *regs = S3C2412_SSMC_BANK(bank);
 207 
 208         bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
 209         bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
 210         bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
 211         bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
 212         bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
 213 }
 214 
 215 /**
 216  * bank_is_io - return true if bank is (possibly) IO.
 217  * @bank: The bank number.
 218  * @bankcfg: The value of S3C2412_EBI_BANKCFG.
 219  */
 220 static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
 221 {
 222         if (bank < 2)
 223                 return true;
 224 
 225         return !(bankcfg & (1 << bank));
 226 }
 227 
 228 int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
 229                          struct s3c_iotimings *timings)
 230 {
 231         struct s3c2412_iobank_timing *bt;
 232         u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
 233         unsigned int bank;
 234 
 235         /* look through all banks to see what is currently set. */
 236 
 237         for (bank = 0; bank < MAX_BANKS; bank++) {
 238                 if (!bank_is_io(bank, bankcfg))
 239                         continue;
 240 
 241                 bt = kzalloc(sizeof(*bt), GFP_KERNEL);
 242                 if (!bt)
 243                         return -ENOMEM;
 244 
 245                 timings->bank[bank].io_2412 = bt;
 246                 s3c2412_iotiming_getbank(cfg, bt, bank);
 247         }
 248 
 249         s3c2412_print_timing("get", timings);
 250         return 0;
 251 }
 252 
 253 /* this is in here as it is so small, it doesn't currently warrant a file
 254  * to itself. We expect that any s3c24xx needing this is going to also
 255  * need the iotiming support.
 256  */
 257 void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
 258 {
 259         struct s3c_cpufreq_board *board = cfg->board;
 260         u32 refresh;
 261 
 262         WARN_ON(board == NULL);
 263 
 264         /* Reduce both the refresh time (in ns) and the frequency (in MHz)
 265          * down to ensure that we do not overflow 32 bit numbers.
 266          *
 267          * This should work for HCLK up to 133MHz and refresh period up
 268          * to 30usec.
 269          */
 270 
 271         refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
 272         refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
 273         refresh &= ((1 << 16) - 1);
 274 
 275         s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
 276 
 277         __raw_writel(refresh, S3C2412_REFRESH);
 278 }