This source file includes following definitions.
- smartq5_machine_init
1
2
3
4
5 #include <linux/fb.h>
6 #include <linux/gpio.h>
7 #include <linux/gpio_keys.h>
8 #include <linux/init.h>
9 #include <linux/input.h>
10 #include <linux/leds.h>
11 #include <linux/platform_device.h>
12
13 #include <asm/mach-types.h>
14 #include <asm/mach/arch.h>
15
16 #include <video/samsung_fimd.h>
17 #include <mach/irqs.h>
18 #include <mach/map.h>
19 #include <mach/regs-gpio.h>
20 #include <mach/gpio-samsung.h>
21
22 #include <plat/cpu.h>
23 #include <plat/devs.h>
24 #include <plat/fb.h>
25 #include <plat/gpio-cfg.h>
26 #include <plat/samsung-time.h>
27
28 #include "common.h"
29 #include "mach-smartq.h"
30
31 static struct gpio_led smartq5_leds[] = {
32 {
33 .name = "smartq5:green",
34 .active_low = 1,
35 .gpio = S3C64XX_GPN(8),
36 },
37 {
38 .name = "smartq5:red",
39 .active_low = 1,
40 .gpio = S3C64XX_GPN(9),
41 },
42 };
43
44 static struct gpio_led_platform_data smartq5_led_data = {
45 .num_leds = ARRAY_SIZE(smartq5_leds),
46 .leds = smartq5_leds,
47 };
48
49 static struct platform_device smartq5_leds_device = {
50 .name = "leds-gpio",
51 .id = -1,
52 .dev.platform_data = &smartq5_led_data,
53 };
54
55
56 static struct gpio_keys_button smartq5_buttons[] = {
57 {
58 .gpio = S3C64XX_GPL(14),
59 .code = KEY_POWER,
60 .desc = "Power",
61 .active_low = 1,
62 .debounce_interval = 5,
63 .type = EV_KEY,
64 },
65 {
66 .gpio = S3C64XX_GPN(2),
67 .code = KEY_KPMINUS,
68 .desc = "Minus",
69 .active_low = 1,
70 .debounce_interval = 5,
71 .type = EV_KEY,
72 },
73 {
74 .gpio = S3C64XX_GPN(12),
75 .code = KEY_KPPLUS,
76 .desc = "Plus",
77 .active_low = 1,
78 .debounce_interval = 5,
79 .type = EV_KEY,
80 },
81 {
82 .gpio = S3C64XX_GPN(15),
83 .code = KEY_ENTER,
84 .desc = "Move",
85 .active_low = 1,
86 .debounce_interval = 5,
87 .type = EV_KEY,
88 },
89 };
90
91 static struct gpio_keys_platform_data smartq5_buttons_data = {
92 .buttons = smartq5_buttons,
93 .nbuttons = ARRAY_SIZE(smartq5_buttons),
94 };
95
96 static struct platform_device smartq5_buttons_device = {
97 .name = "gpio-keys",
98 .id = 0,
99 .num_resources = 0,
100 .dev = {
101 .platform_data = &smartq5_buttons_data,
102 }
103 };
104
105 static struct s3c_fb_pd_win smartq5_fb_win0 = {
106 .max_bpp = 32,
107 .default_bpp = 16,
108 .xres = 800,
109 .yres = 480,
110 };
111
112 static struct fb_videomode smartq5_lcd_timing = {
113 .left_margin = 216,
114 .right_margin = 40,
115 .upper_margin = 35,
116 .lower_margin = 10,
117 .hsync_len = 1,
118 .vsync_len = 1,
119 .xres = 800,
120 .yres = 480,
121 .refresh = 80,
122 };
123
124 static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
125 .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
126 .vtiming = &smartq5_lcd_timing,
127 .win[0] = &smartq5_fb_win0,
128 .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
129 .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
130 VIDCON1_INV_VDEN,
131 };
132
133 static struct platform_device *smartq5_devices[] __initdata = {
134 &smartq5_leds_device,
135 &smartq5_buttons_device,
136 };
137
138 static void __init smartq5_machine_init(void)
139 {
140 s3c_fb_set_platdata(&smartq5_lcd_pdata);
141
142 smartq_machine_init();
143
144 platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
145 }
146
147 MACHINE_START(SMARTQ5, "SmartQ 5")
148
149 .atag_offset = 0x100,
150 .nr_irqs = S3C64XX_NR_IRQS,
151 .init_irq = s3c6410_init_irq,
152 .map_io = smartq_map_io,
153 .init_machine = smartq5_machine_init,
154 .init_time = samsung_timer_init,
155 .restart = s3c64xx_restart,
156 MACHINE_END