root/arch/arm/mach-s3c64xx/s3c6410.c

DEFINITIONS

1. s3c6410_map_io
2. s3c6410_init_irq
3. s3c6410_core_init
4. s3c6410_init

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright 2008 Simtec Electronics
   4 // Copyright 2008 Simtec Electronics
   5 //      Ben Dooks <ben@simtec.co.uk>
   6 //      http://armlinux.simtec.co.uk/
   7 
   8 /*
   9  * NOTE: Code in this file is not used when booting with Device Tree support.
  10  */
  11 
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/list.h>
  16 #include <linux/timer.h>
  17 #include <linux/init.h>
  18 #include <linux/clk.h>
  19 #include <linux/io.h>
  20 #include <linux/device.h>
  21 #include <linux/serial_core.h>
  22 #include <linux/serial_s3c.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/of.h>
  25 
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/map.h>
  28 #include <asm/mach/irq.h>
  29 
  30 #include <mach/hardware.h>
  31 #include <asm/irq.h>
  32 
  33 #include <plat/cpu-freq.h>
  34 #include <mach/regs-clock.h>
  35 
  36 #include <plat/cpu.h>
  37 #include <plat/devs.h>
  38 #include <plat/sdhci.h>
  39 #include <plat/adc-core.h>
  40 #include <plat/iic-core.h>
  41 
  42 #include "ata-core.h"
  43 #include "common.h"
  44 #include "onenand-core.h"
  45 
  46 void __init s3c6410_map_io(void)
  47 {
  48         /* initialise device information early */
  49         s3c6410_default_sdhci0();
  50         s3c6410_default_sdhci1();
  51         s3c6410_default_sdhci2();
  52 
  53         /* the i2c devices are directly compatible with s3c2440 */
  54         s3c_i2c0_setname("s3c2440-i2c");
  55         s3c_i2c1_setname("s3c2440-i2c");
  56 
  57         s3c_adc_setname("s3c64xx-adc");
  58         s3c_device_nand.name = "s3c6400-nand";
  59         s3c_onenand_setname("s3c6410-onenand");
  60         s3c64xx_onenand1_setname("s3c6410-onenand");
  61         s3c_cfcon_setname("s3c64xx-pata");
  62 }
  63 
  64 void __init s3c6410_init_irq(void)
  65 {
  66         /* VIC0 is missing IRQ7, VIC1 is fully populated. */
  67         s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
  68 }
  69 
  70 struct bus_type s3c6410_subsys = {
  71         .name           = "s3c6410-core",
  72         .dev_name       = "s3c6410-core",
  73 };
  74 
  75 static struct device s3c6410_dev = {
  76         .bus    = &s3c6410_subsys,
  77 };
  78 
  79 static int __init s3c6410_core_init(void)
  80 {
  81         /* Not applicable when using DT. */
  82         if (of_have_populated_dt() || !soc_is_s3c64xx())
  83                 return 0;
  84 
  85         return subsys_system_register(&s3c6410_subsys, NULL);
  86 }
  87 
  88 core_initcall(s3c6410_core_init);
  89 
  90 int __init s3c6410_init(void)
  91 {
  92         printk("S3C6410: Initialising architecture\n");
  93 
  94         return device_register(&s3c6410_dev);
  95 }