root/arch/arm/mach-lpc32xx/serial.c

DEFINITIONS

1. lpc32xx_loopback_set
2. lpc32xx_serial_init

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * arch/arm/mach-lpc32xx/serial.c
   4  *
   5  * Author: Kevin Wells <kevin.wells@nxp.com>
   6  *
   7  * Copyright (C) 2010 NXP Semiconductors
   8  */
   9 
  10 #include <linux/kernel.h>
  11 #include <linux/types.h>
  12 #include <linux/serial.h>
  13 #include <linux/serial_core.h>
  14 #include <linux/serial_reg.h>
  15 #include <linux/serial_8250.h>
  16 #include <linux/clk.h>
  17 #include <linux/io.h>
  18 
  19 #include "lpc32xx.h"
  20 #include "common.h"
  21 
  22 #define LPC32XX_SUART_FIFO_SIZE 64
  23 
  24 struct uartinit {
  25         char *uart_ck_name;
  26         u32 ck_mode_mask;
  27         void __iomem *pdiv_clk_reg;
  28         resource_size_t mapbase;
  29 };
  30 
  31 static struct uartinit uartinit_data[] __initdata = {
  32         {
  33                 .uart_ck_name = "uart5_ck",
  34                 .ck_mode_mask =
  35                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
  36                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
  37                 .mapbase = LPC32XX_UART5_BASE,
  38         },
  39         {
  40                 .uart_ck_name = "uart3_ck",
  41                 .ck_mode_mask =
  42                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
  43                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
  44                 .mapbase = LPC32XX_UART3_BASE,
  45         },
  46         {
  47                 .uart_ck_name = "uart4_ck",
  48                 .ck_mode_mask =
  49                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
  50                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
  51                 .mapbase = LPC32XX_UART4_BASE,
  52         },
  53         {
  54                 .uart_ck_name = "uart6_ck",
  55                 .ck_mode_mask =
  56                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
  57                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
  58                 .mapbase = LPC32XX_UART6_BASE,
  59         },
  60 };
  61 
  62 /* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
  63 void lpc32xx_loopback_set(resource_size_t mapbase, int state)
  64 {
  65         int bit;
  66         u32 tmp;
  67 
  68         switch (mapbase) {
  69         case LPC32XX_HS_UART1_BASE:
  70                 bit = 0;
  71                 break;
  72         case LPC32XX_HS_UART2_BASE:
  73                 bit = 1;
  74                 break;
  75         case LPC32XX_HS_UART7_BASE:
  76                 bit = 6;
  77                 break;
  78         default:
  79                 WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
  80                 return;
  81         }
  82 
  83         tmp = readl(LPC32XX_UARTCTL_CLOOP);
  84         if (state)
  85                 tmp |= (1 << bit);
  86         else
  87                 tmp &= ~(1 << bit);
  88         writel(tmp, LPC32XX_UARTCTL_CLOOP);
  89 }
  90 EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
  91 
  92 void __init lpc32xx_serial_init(void)
  93 {
  94         u32 tmp, clkmodes = 0;
  95         struct clk *clk;
  96         unsigned int puart;
  97         int i, j;
  98 
  99         for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 100                 clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
 101                 if (!IS_ERR(clk)) {
 102                         clk_enable(clk);
 103                 }
 104 
 105                 /* Setup UART clock modes for all UARTs, disable autoclock */
 106                 clkmodes |= uartinit_data[i].ck_mode_mask;
 107 
 108                 /* pre-UART clock divider set to 1 */
 109                 __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
 110 
 111                 /*
 112                  * Force a flush of the RX FIFOs to work around a
 113                  * HW bug
 114                  */
 115                 puart = uartinit_data[i].mapbase;
 116                 __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
 117                 __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
 118                 j = LPC32XX_SUART_FIFO_SIZE;
 119                 while (j--)
 120                         tmp = __raw_readl(
 121                                 LPC32XX_UART_DLL_FIFO(puart));
 122                 __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 123         }
 124 
 125         /* This needs to be done after all UART clocks are setup */
 126         __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
 127         for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 128                 /* Force a flush of the RX FIFOs to work around a HW bug */
 129                 puart = uartinit_data[i].mapbase;
 130                 __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
 131                 __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
 132                 j = LPC32XX_SUART_FIFO_SIZE;
 133                 while (j--)
 134                         tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
 135                 __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 136         }
 137 
 138         /* Disable IrDA pulsing support on UART6 */
 139         tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
 140         tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
 141         __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
 142 
 143         /* Disable UART5->USB transparent mode or USB won't work */
 144         tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
 145         tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
 146         __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
 147 }