root/arch/arm/mach-sa1100/clock.c

DEFINITIONS

1. clk_gpio27_enable
2. clk_gpio27_disable
3. clk_mpll_recalc_rate
4. sa11xx_clk_init

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  *  linux/arch/arm/mach-sa1100/clock.c
   4  */
   5 #include <linux/kernel.h>
   6 #include <linux/errno.h>
   7 #include <linux/err.h>
   8 #include <linux/clk.h>
   9 #include <linux/clkdev.h>
  10 #include <linux/clk-provider.h>
  11 #include <linux/io.h>
  12 #include <linux/spinlock.h>
  13 
  14 #include <mach/hardware.h>
  15 #include <mach/generic.h>
  16 
  17 static const char * const clk_tucr_parents[] = {
  18         "clk32768", "clk3686400",
  19 };
  20 
  21 static DEFINE_SPINLOCK(tucr_lock);
  22 
  23 static int clk_gpio27_enable(struct clk_hw *hw)
  24 {
  25         unsigned long flags;
  26 
  27         /*
  28          * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
  29          * (SA-1110 Developer's Manual, section 9.1.2.1)
  30          */
  31         local_irq_save(flags);
  32         GAFR |= GPIO_32_768kHz;
  33         GPDR |= GPIO_32_768kHz;
  34         local_irq_restore(flags);
  35 
  36         return 0;
  37 }
  38 
  39 static void clk_gpio27_disable(struct clk_hw *hw)
  40 {
  41         unsigned long flags;
  42 
  43         local_irq_save(flags);
  44         GPDR &= ~GPIO_32_768kHz;
  45         GAFR &= ~GPIO_32_768kHz;
  46         local_irq_restore(flags);
  47 }
  48 
  49 static const struct clk_ops clk_gpio27_ops = {
  50         .enable = clk_gpio27_enable,
  51         .disable = clk_gpio27_disable,
  52 };
  53 
  54 static const char * const clk_gpio27_parents[] = {
  55         "tucr-mux",
  56 };
  57 
  58 static const struct clk_init_data clk_gpio27_init_data __initconst = {
  59         .name = "gpio27",
  60         .ops = &clk_gpio27_ops,
  61         .parent_names = clk_gpio27_parents,
  62         .num_parents = ARRAY_SIZE(clk_gpio27_parents),
  63 };
  64 
  65 /*
  66  * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
  67  * multiply its input rate by 4 x (4 + PPCR).  This calculation gives
  68  * the exact rate.  The figures given in the table are the rates rounded
  69  * to 100kHz.  Stick with sa11x0_getspeed() for the time being.
  70  */
  71 static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
  72         unsigned long prate)
  73 {
  74         return sa11x0_getspeed(0) * 1000;
  75 }
  76 
  77 static const struct clk_ops clk_mpll_ops = {
  78         .recalc_rate = clk_mpll_recalc_rate,
  79 };
  80 
  81 static const char * const clk_mpll_parents[] = {
  82         "clk3686400",
  83 };
  84 
  85 static const struct clk_init_data clk_mpll_init_data __initconst = {
  86         .name = "mpll",
  87         .ops = &clk_mpll_ops,
  88         .parent_names = clk_mpll_parents,
  89         .num_parents = ARRAY_SIZE(clk_mpll_parents),
  90         .flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
  91 };
  92 
  93 int __init sa11xx_clk_init(void)
  94 {
  95         struct clk_hw *hw;
  96         int ret;
  97 
  98         hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
  99         if (IS_ERR(hw))
 100                 return PTR_ERR(hw);
 101 
 102         clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
 103 
 104         hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
 105         if (IS_ERR(hw))
 106                 return PTR_ERR(hw);
 107 
 108         clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
 109 
 110         hw = kzalloc(sizeof(*hw), GFP_KERNEL);
 111         if (!hw)
 112                 return -ENOMEM;
 113         hw->init = &clk_mpll_init_data;
 114         ret = clk_hw_register(NULL, hw);
 115         if (ret) {
 116                 kfree(hw);
 117                 return ret;
 118         }
 119 
 120         clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
 121         clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
 122         clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
 123         clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
 124         clk_hw_register_clkdev(hw, NULL, "1800");
 125 
 126         hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
 127                                  ARRAY_SIZE(clk_tucr_parents), 0,
 128                                  (void __iomem *)&TUCR, FShft(TUCR_TSEL),
 129                                  FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
 130         clk_set_rate(hw->clk, 3686400);
 131 
 132         hw = kzalloc(sizeof(*hw), GFP_KERNEL);
 133         if (!hw)
 134                 return -ENOMEM;
 135         hw->init = &clk_gpio27_init_data;
 136         ret = clk_hw_register(NULL, hw);
 137         if (ret) {
 138                 kfree(hw);
 139                 return ret;
 140         }
 141 
 142         clk_hw_register_clkdev(hw, NULL, "sa1111.0");
 143 
 144         return 0;
 145 }