root/arch/arm/mach-pxa/h5000.h

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Hardware definitions for HP iPAQ h5xxx Handheld Computers
   4  *
   5  * Copyright(20)02 Hewlett-Packard Company.
   6  *
   7  * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
   8  * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
   9  * FITNESS FOR ANY PARTICULAR PURPOSE.
  10  *
  11  * Author: Jamey Hicks
  12  */
  13 
  14 #ifndef __ASM_ARCH_H5000_H
  15 #define __ASM_ARCH_H5000_H
  16 
  17 #include "mfp-pxa25x.h"
  18 
  19 /*
  20  * CPU GPIOs
  21  */
  22 
  23 #define H5000_GPIO_POWER_BUTTON   (0)
  24 #define H5000_GPIO_RESET_BUTTON_N (1)
  25 #define H5000_GPIO_OPT_INT        (2)
  26 #define H5000_GPIO_BACKUP_POWER   (3)
  27 #define H5000_GPIO_ACTION_BUTTON  (4)
  28 #define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
  29 /* 6 not connected */
  30 #define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
  31 /* 8 not connected */
  32 #define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
  33 #define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
  34 #define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
  35 /*(12) not connected */
  36 #define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
  37 #define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
  38 /*(15) is CS1# */
  39 /*(16) not connected */
  40 /*(17) not connected */
  41 /*(18) is pcmcia ready */
  42 /*(19) is dreq1 */
  43 /*(20) is dreq0 */
  44 #define H5000_GPIO_OE_RD_NWR    (21)       /* output enable on rd/nwr signal to companion asic */
  45 /*(22) is not connected */
  46 #define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
  47 #define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
  48 #define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
  49 #define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
  50 /*(27) not connected */
  51 #define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
  52 #define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
  53 #define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
  54 #define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
  55 #define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
  56 /*(33) is CS5# */
  57 #define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
  58 #define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
  59 #define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
  60 #define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
  61 #define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
  62 #define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
  63 #define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
  64 #define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
  65 
  66 #define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
  67 #define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
  68 #define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
  69 #define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
  70 
  71 #define H5000_GPIO_IRDA_RXD     (46)
  72 #define H5000_GPIO_IRDA_TXD     (47)
  73 
  74 #define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
  75 #define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
  76 #define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
  77 #define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
  78 #define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
  79 #define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
  80 #define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
  81 #define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
  82 #define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
  83 #define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
  84 
  85 #define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
  86 /*(59) not connected */
  87 #define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
  88 #define H5000_GPIO_POWER_RS232_N        (61)       /* inverted FORCEON to rs232 transceiver */
  89 #define H5000_GPIO_POWER_ACCEL_N        (62)       /* controls power to accel */
  90 /*(63) is not connected */
  91 #define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
  92 #define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
  93 #define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
  94 #define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
  95 #define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
  96 /*(69) is not connected */
  97 #define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
  98 #define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
  99 #define H5000_GPIO_BT_M_RESET   (72)
 100 #define H5000_GPIO_STD_CHG_RATE (73)
 101 #define H5000_GPIO_SD_WP_N      (74)
 102 #define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
 103 #define H5000_GPIO_HEADPHONE_DETECT     (76)
 104 #define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
 105 /*(78) is CS2# */
 106 /*(79) is CS3# */
 107 /*(80) is CS4# */
 108 
 109 #endif /* __ASM_ARCH_H5000_H */