arch/arm/mach-pxa/idp.h

/* [<][>][^][v][top][bottom][index][help] */
   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  *  arch/arm/mach-pxa/include/mach/idp.h
   4  *
   5  * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
   6  *
   7  * 2001-09-13: Cliff Brake <cbrake@accelent.com>
   8  *             Initial code
   9  *
  10  * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
  11  *             <http://www.vibren.com> <http://bec-systems.com>
  12  *             Changes for 2.6 kernel.
  13  */
  14 
  15 
  16 /*
  17  * Note: this file must be safe to include in assembly files
  18  *
  19  * Support for the Vibren PXA255 IDP requires rev04 or later
  20  * IDP hardware.
  21  */
  22 
  23 #include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
  24 
  25 #define IDP_FLASH_PHYS          (PXA_CS0_PHYS)
  26 #define IDP_ALT_FLASH_PHYS      (PXA_CS1_PHYS)
  27 #define IDP_MEDIAQ_PHYS         (PXA_CS3_PHYS)
  28 #define IDP_IDE_PHYS            (PXA_CS5_PHYS + 0x03000000)
  29 #define IDP_ETH_PHYS            (PXA_CS5_PHYS + 0x03400000)
  30 #define IDP_COREVOLT_PHYS       (PXA_CS5_PHYS + 0x03800000)
  31 #define IDP_CPLD_PHYS           (PXA_CS5_PHYS + 0x03C00000)
  32 
  33 
  34 /*
  35  * virtual memory map
  36  */
  37 
  38 #define IDP_COREVOLT_VIRT       (0xf0000000)
  39 #define IDP_COREVOLT_SIZE       (1*1024*1024)
  40 
  41 #define IDP_CPLD_VIRT           (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
  42 #define IDP_CPLD_SIZE           (1*1024*1024)
  43 
  44 #if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
  45 #error Your custom IO space is getting a bit large !!
  46 #endif
  47 
  48 #define CPLD_P2V(x)             ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
  49 #define CPLD_V2P(x)             ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
  50 
  51 #ifndef __ASSEMBLY__
  52 #  define __CPLD_REG(x)         (*((volatile unsigned long *)CPLD_P2V(x)))
  53 #else
  54 #  define __CPLD_REG(x)         CPLD_P2V(x)
  55 #endif
  56 
  57 /* board level registers in the CPLD: (offsets from CPLD_VIRT) */
  58 
  59 #define _IDP_CPLD_REV                   (IDP_CPLD_PHYS + 0x00)
  60 #define _IDP_CPLD_PERIPH_PWR            (IDP_CPLD_PHYS + 0x04)
  61 #define _IDP_CPLD_LED_CONTROL           (IDP_CPLD_PHYS + 0x08)
  62 #define _IDP_CPLD_KB_COL_HIGH           (IDP_CPLD_PHYS + 0x0C)
  63 #define _IDP_CPLD_KB_COL_LOW            (IDP_CPLD_PHYS + 0x10)
  64 #define _IDP_CPLD_PCCARD_EN             (IDP_CPLD_PHYS + 0x14)
  65 #define _IDP_CPLD_GPIOH_DIR             (IDP_CPLD_PHYS + 0x18)
  66 #define _IDP_CPLD_GPIOH_VALUE           (IDP_CPLD_PHYS + 0x1C)
  67 #define _IDP_CPLD_GPIOL_DIR             (IDP_CPLD_PHYS + 0x20)
  68 #define _IDP_CPLD_GPIOL_VALUE           (IDP_CPLD_PHYS + 0x24)
  69 #define _IDP_CPLD_PCCARD_PWR            (IDP_CPLD_PHYS + 0x28)
  70 #define _IDP_CPLD_MISC_CTRL             (IDP_CPLD_PHYS + 0x2C)
  71 #define _IDP_CPLD_LCD                   (IDP_CPLD_PHYS + 0x30)
  72 #define _IDP_CPLD_FLASH_WE              (IDP_CPLD_PHYS + 0x34)
  73 
  74 #define _IDP_CPLD_KB_ROW                (IDP_CPLD_PHYS + 0x50)
  75 #define _IDP_CPLD_PCCARD0_STATUS        (IDP_CPLD_PHYS + 0x54)
  76 #define _IDP_CPLD_PCCARD1_STATUS        (IDP_CPLD_PHYS + 0x58)
  77 #define _IDP_CPLD_MISC_STATUS           (IDP_CPLD_PHYS + 0x5C)
  78 
  79 /* FPGA register virtual addresses */
  80 
  81 #define IDP_CPLD_REV                    __CPLD_REG(_IDP_CPLD_REV)
  82 #define IDP_CPLD_PERIPH_PWR             __CPLD_REG(_IDP_CPLD_PERIPH_PWR)
  83 #define IDP_CPLD_LED_CONTROL            __CPLD_REG(_IDP_CPLD_LED_CONTROL)
  84 #define IDP_CPLD_KB_COL_HIGH            __CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
  85 #define IDP_CPLD_KB_COL_LOW             __CPLD_REG(_IDP_CPLD_KB_COL_LOW)
  86 #define IDP_CPLD_PCCARD_EN              __CPLD_REG(_IDP_CPLD_PCCARD_EN)
  87 #define IDP_CPLD_GPIOH_DIR              __CPLD_REG(_IDP_CPLD_GPIOH_DIR)
  88 #define IDP_CPLD_GPIOH_VALUE            __CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
  89 #define IDP_CPLD_GPIOL_DIR              __CPLD_REG(_IDP_CPLD_GPIOL_DIR)
  90 #define IDP_CPLD_GPIOL_VALUE            __CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
  91 #define IDP_CPLD_PCCARD_PWR             __CPLD_REG(_IDP_CPLD_PCCARD_PWR)
  92 #define IDP_CPLD_MISC_CTRL              __CPLD_REG(_IDP_CPLD_MISC_CTRL)
  93 #define IDP_CPLD_LCD                    __CPLD_REG(_IDP_CPLD_LCD)
  94 #define IDP_CPLD_FLASH_WE               __CPLD_REG(_IDP_CPLD_FLASH_WE)
  95 
  96 #define IDP_CPLD_KB_ROW                 __CPLD_REG(_IDP_CPLD_KB_ROW)
  97 #define IDP_CPLD_PCCARD0_STATUS         __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
  98 #define IDP_CPLD_PCCARD1_STATUS         __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
  99 #define IDP_CPLD_MISC_STATUS            __CPLD_REG(_IDP_CPLD_MISC_STATUS)
 100 
 101 
 102 /*
 103  * Bit masks for various registers
 104  */
 105 
 106 // IDP_CPLD_PCCARD_PWR
 107 #define PCC0_PWR0       (1 << 0)
 108 #define PCC0_PWR1       (1 << 1)
 109 #define PCC0_PWR2       (1 << 2)
 110 #define PCC0_PWR3       (1 << 3)
 111 #define PCC1_PWR0       (1 << 4)
 112 #define PCC1_PWR1       (1 << 5)
 113 #define PCC1_PWR2       (1 << 6)
 114 #define PCC1_PWR3       (1 << 7)
 115 
 116 // IDP_CPLD_PCCARD_EN
 117 #define PCC0_RESET      (1 << 6)
 118 #define PCC1_RESET      (1 << 7)
 119 #define PCC0_ENABLE     (1 << 0)
 120 #define PCC1_ENABLE     (1 << 1)
 121 
 122 // IDP_CPLD_PCCARDx_STATUS
 123 #define _PCC_WRPROT     (1 << 7) // 7-4 read as low true
 124 #define _PCC_RESET      (1 << 6)
 125 #define _PCC_IRQ        (1 << 5)
 126 #define _PCC_INPACK     (1 << 4)
 127 #define PCC_BVD2        (1 << 3)
 128 #define PCC_BVD1        (1 << 2)
 129 #define PCC_VS2         (1 << 1)
 130 #define PCC_VS1         (1 << 0)
 131 
 132 /* A listing of interrupts used by external hardware devices */
 133 
 134 #define TOUCH_PANEL_IRQ                 PXA_GPIO_TO_IRQ(5)
 135 #define IDE_IRQ                         PXA_GPIO_TO_IRQ(21)
 136 
 137 #define TOUCH_PANEL_IRQ_EDGE            IRQ_TYPE_EDGE_FALLING
 138 
 139 #define ETHERNET_IRQ                    PXA_GPIO_TO_IRQ(4)
 140 #define ETHERNET_IRQ_EDGE               IRQ_TYPE_EDGE_RISING
 141 
 142 #define IDE_IRQ_EDGE                    IRQ_TYPE_EDGE_RISING
 143 
 144 #define PCMCIA_S0_CD_VALID              PXA_GPIO_TO_IRQ(7)
 145 #define PCMCIA_S0_CD_VALID_EDGE         IRQ_TYPE_EDGE_BOTH
 146 
 147 #define PCMCIA_S1_CD_VALID              PXA_GPIO_TO_IRQ(8)
 148 #define PCMCIA_S1_CD_VALID_EDGE         IRQ_TYPE_EDGE_BOTH
 149 
 150 #define PCMCIA_S0_RDYINT                PXA_GPIO_TO_IRQ(19)
 151 #define PCMCIA_S1_RDYINT                PXA_GPIO_TO_IRQ(22)
 152 
 153 
 154 /*
 155  * Macros for LED Driver
 156  */
 157 
 158 /* leds 0 = ON */
 159 #define IDP_HB_LED      (1<<5)
 160 #define IDP_BUSY_LED    (1<<6)
 161 
 162 #define IDP_LEDS_MASK   (IDP_HB_LED | IDP_BUSY_LED)
 163 
 164 /*
 165  * macros for MTD driver
 166  */
 167 
 168 #define FLASH_WRITE_PROTECT_DISABLE()   ((IDP_CPLD_FLASH_WE) &= ~(0x1))
 169 #define FLASH_WRITE_PROTECT_ENABLE()    ((IDP_CPLD_FLASH_WE) |= (0x1))
 170 
 171 /*
 172  * macros for matrix keyboard driver
 173  */
 174 
 175 #define KEYBD_MATRIX_NUMBER_INPUTS      7
 176 #define KEYBD_MATRIX_NUMBER_OUTPUTS     14
 177 
 178 #define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC        FALSE
 179 #define KEYBD_MATRIX_INVERT_INPUT_LOGIC         FALSE
 180 
 181 #define KEYBD_MATRIX_SETTLING_TIME_US                   100
 182 #define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT         2
 183 
 184 #define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
 185 {\
 186         IDP_CPLD_KB_COL_LOW = outputs;\
 187         IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
 188 }
 189 
 190 #define KEYBD_MATRIX_GET_INPUTS(inputs) \
 191 {\
 192         inputs = (IDP_CPLD_KB_ROW & 0x7f);\
 193 }
 194 
 195
/* [<][>][^][v][top][bottom][index][help] */
root/arch/arm/mach-pxa/idp.h

INCLUDED FROM
