USB_CTRL_REG 144 drivers/phy/broadcom/phy-brcm-usb-init.c usb_ctrl_set(USB_CTRL_REG(base, reg), \ USB_CTRL_REG 147 drivers/phy/broadcom/phy-brcm-usb-init.c usb_ctrl_unset(USB_CTRL_REG(base, reg), \ USB_CTRL_REG 459 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); USB_CTRL_REG 461 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); USB_CTRL_REG 465 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); USB_CTRL_REG 469 drivers/phy/broadcom/phy-brcm-usb-init.c return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; USB_CTRL_REG 478 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); USB_CTRL_REG 480 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); USB_CTRL_REG 485 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); USB_CTRL_REG 794 drivers/phy/broadcom/phy-brcm-usb-init.c reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); USB_CTRL_REG 813 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); USB_CTRL_REG 829 drivers/phy/broadcom/phy-brcm-usb-init.c reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); USB_CTRL_REG 843 drivers/phy/broadcom/phy-brcm-usb-init.c reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); USB_CTRL_REG 847 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); USB_CTRL_REG 880 drivers/phy/broadcom/phy-brcm-usb-init.c reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); USB_CTRL_REG 896 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); USB_CTRL_REG 901 drivers/phy/broadcom/phy-brcm-usb-init.c reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); USB_CTRL_REG 905 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); USB_CTRL_REG 943 drivers/phy/broadcom/phy-brcm-usb-init.c reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); USB_CTRL_REG 946 drivers/phy/broadcom/phy-brcm-usb-init.c brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); USB_CTRL_REG 354 drivers/usb/musb/am35x.c musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);