UM_KERN_ERR 156 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : failed to write " UM_KERN_ERR 169 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : sigprocmask failed, " UM_KERN_ERR 177 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : setsid failed, errno = %d\n", UM_KERN_ERR 183 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : TIOCSCTTY failed on " UM_KERN_ERR 189 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : tcsetpgrp failed on " UM_KERN_ERR 202 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : failed to read " UM_KERN_ERR 214 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : write failed, " UM_KERN_ERR 228 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_tramp : os_pipe failed, err = %d\n", UM_KERN_ERR 243 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n", UM_KERN_ERR 251 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_tramp : failed to read " UM_KERN_ERR 253 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "read failed, err = %d\n", errno); UM_KERN_ERR 254 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "fd %d will not support SIGWINCH\n", fd); UM_KERN_ERR 260 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd " UM_KERN_ERR 298 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "register_winch : failed to write " UM_KERN_ERR 38 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un " UM_KERN_ERR 58 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : control socket failed, " UM_KERN_ERR 66 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : control connect failed, " UM_KERN_ERR 74 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : data socket failed, " UM_KERN_ERR 80 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : data bind failed, " UM_KERN_ERR 87 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un " UM_KERN_ERR 99 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : control setup request " UM_KERN_ERR 107 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : read of data socket failed, " UM_KERN_ERR 29 arch/um/drivers/fd.c printk(UM_KERN_ERR "fd_init : channel type 'fd' must specify a " UM_KERN_ERR 36 arch/um/drivers/fd.c printk(UM_KERN_ERR "fd_init : couldn't parse file descriptor " UM_KERN_ERR 79 arch/um/drivers/fd.c printk(UM_KERN_ERR "Failed to restore terminal state - " UM_KERN_ERR 190 arch/um/drivers/mconsole_user.c printk(UM_KERN_ERR "mconsole_notify - socket failed, " UM_KERN_ERR 215 arch/um/drivers/mconsole_user.c printk(UM_KERN_ERR "mconsole_notify - sendto failed, " UM_KERN_ERR 26 arch/um/drivers/net_user.c printk(UM_KERN_ERR "Invalid tap IP address - '%s'\n", UM_KERN_ERR 44 arch/um/drivers/net_user.c printk(UM_KERN_ERR "The tap IP address and the UML eth IP " UM_KERN_ERR 88 arch/um/drivers/net_user.c printk(UM_KERN_ERR "read_output - read of %s failed, " UM_KERN_ERR 91 arch/um/drivers/net_user.c printk(UM_KERN_ERR "read_output - read of %s failed, read only " UM_KERN_ERR 187 arch/um/drivers/net_user.c printk(UM_KERN_ERR "change_tramp - pipe failed, err = %d\n", UM_KERN_ERR 225 arch/um/drivers/net_user.c printk(UM_KERN_ERR "change : failed to allocate output " UM_KERN_ERR 25 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_user_init : pcap_open_live failed - " UM_KERN_ERR 47 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : dev_netmask failed\n"); UM_KERN_ERR 54 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : kmalloc failed\n"); UM_KERN_ERR 62 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : pcap_compile failed - " UM_KERN_ERR 69 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : pcap_setfilter " UM_KERN_ERR 119 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_dispatch failed - %s\n", UM_KERN_ERR 32 arch/um/drivers/port_user.c printk(UM_KERN_ERR "port_init : channel type 'port' must " UM_KERN_ERR 39 arch/um/drivers/port_user.c printk(UM_KERN_ERR "port_init : couldn't parse port '%s'\n", UM_KERN_ERR 50 arch/um/drivers/pty.c printk(UM_KERN_ERR "open_pts : Failed to open pts\n"); UM_KERN_ERR 109 arch/um/drivers/pty.c printk(UM_KERN_ERR "getmaster - no usable host pty devices\n"); UM_KERN_ERR 33 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "could not get initial terminal " UM_KERN_ERR 51 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "failed to set terminal attributes\n"); UM_KERN_ERR 82 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp : pipe failed, err = %d\n", UM_KERN_ERR 99 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp : failed to allocate output " UM_KERN_ERR 134 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip-open : Failed to open pty, err = %d\n", UM_KERN_ERR 142 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "Couldn't open tty for slip line, " UM_KERN_ERR 161 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp failed - err = %d\n", UM_KERN_ERR 167 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "get_ifname failed, err = %d\n", UM_KERN_ERR 176 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "Failed to set slip discipline " UM_KERN_ERR 206 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp failed - errno = %d\n", -err); UM_KERN_ERR 60 arch/um/drivers/slirp_user.c printk(UM_KERN_ERR "slirp_tramp failed - errno = %d\n", -err); UM_KERN_ERR 88 arch/um/drivers/slirp_user.c printk(UM_KERN_ERR "slirp_close: no child process to shut " UM_KERN_ERR 95 arch/um/drivers/slirp_user.c printk(UM_KERN_ERR "slirp_close: sending hangup to %d failed " UM_KERN_ERR 24 arch/um/drivers/tty.c printk(UM_KERN_ERR "tty_init : channel type 'tty' must specify " UM_KERN_ERR 28 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in " UM_KERN_ERR 82 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open : data socket failed, " UM_KERN_ERR 89 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: SO_REUSEADDR failed, " UM_KERN_ERR 99 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_TTL " UM_KERN_ERR 108 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_LOOP " UM_KERN_ERR 117 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open : data bind failed, " UM_KERN_ERR 129 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: IP_ADD_MEMBERSHIP " UM_KERN_ERR 131 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "There appears not to be a " UM_KERN_ERR 134 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "eth0 should be configured in order " UM_KERN_ERR 160 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_close: IP_DROP_MEMBERSHIP " UM_KERN_ERR 25 arch/um/drivers/vde_user.c printk(UM_KERN_ERR "vde_user_init: vde_open failed, " UM_KERN_ERR 81 arch/um/drivers/vde_user.c printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args " UM_KERN_ERR 109 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "vector_setup - Couldn't parse '%s'\n", arg); UM_KERN_ERR 131 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to open tun device\n"); UM_KERN_ERR 140 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to select tap interface\n"); UM_KERN_ERR 183 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err); UM_KERN_ERR 197 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to parse interface spec\n"); UM_KERN_ERR 203 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to allocate file descriptors\n"); UM_KERN_ERR 215 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to create tun interface\n"); UM_KERN_ERR 222 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_tap: init failed, error %d", fd); UM_KERN_ERR 235 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to parse interface spec\n"); UM_KERN_ERR 241 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to allocate file descriptors\n"); UM_KERN_ERR 253 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to create tun interface: %i\n", result->tx_fd); UM_KERN_ERR 261 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UM_KERN_ERR 267 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_hybrid: init failed"); UM_KERN_ERR 285 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "unix open:cannot allocate remote addr"); UM_KERN_ERR 290 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "unix open:cannot allocate remote addr"); UM_KERN_ERR 300 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "bess open:cannot allocate local addr"); UM_KERN_ERR 318 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UM_KERN_ERR 326 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UNIX_BIND_FAIL, errno); UM_KERN_ERR 333 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "bess open:cannot connect to %s %i", remote_addr->sun_path, -errno); UM_KERN_ERR 383 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err); UM_KERN_ERR 491 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UM_KERN_ERR 500 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UM_KERN_ERR 509 arch/um/drivers/vector_user.c printk(UM_KERN_ERR L2TPV3_BIND_FAIL, errno); UM_KERN_ERR 520 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UM_KERN_ERR 547 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_socket: init failed, error %d", err); UM_KERN_ERR 565 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "no parsed config for unit %d\n", unit); UM_KERN_ERR 570 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "missing transport for unit %d\n", unit); UM_KERN_ERR 102 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open: $DISPLAY not set.\n"); UM_KERN_ERR 115 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : mkstemp failed, errno = %d\n", UM_KERN_ERR 122 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", UM_KERN_ERR 131 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : create_unix_socket failed, " UM_KERN_ERR 140 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : run_helper failed, " UM_KERN_ERR 147 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : failed to set descriptor " UM_KERN_ERR 155 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : os_rcv_fd failed, err = %d\n", UM_KERN_ERR 162 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : failed to set xterm " UM_KERN_ERR 48 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_change - request failed, err = %d\n", UM_KERN_ERR 55 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_change : Failed to allocate output " UM_KERN_ERR 126 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_tramp : read of status failed, " UM_KERN_ERR 131 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_tramp : uml_net failed\n"); UM_KERN_ERR 150 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_open - data socketpair failed - " UM_KERN_ERR 158 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_open - control socketpair failed - " UM_KERN_ERR 170 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_open : failed to allocate output " UM_KERN_ERR 178 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_tramp failed - err = %d\n", -err); UM_KERN_ERR 204 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_close - shutdown data socket failed, " UM_KERN_ERR 208 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_close - shutdown control socket " UM_KERN_ERR 105 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp : recvmsg failed - " UM_KERN_ERR 113 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp : didn't receive a " UM_KERN_ERR 119 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp : didn't receive a " UM_KERN_ERR 143 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "Failed to open /dev/net/tun, " UM_KERN_ERR 152 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "TUNSETIFF failed, errno = %d\n", UM_KERN_ERR 162 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open : socketpair failed - " UM_KERN_ERR 179 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp failed - " UM_KERN_ERR 314 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't stat \"%s\" : err = %d\n", file, UM_KERN_ERR 326 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't open \"%s\", " UM_KERN_ERR 332 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't get the block size of " UM_KERN_ERR 352 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't stat \"%s\" : err = %d\n", file, UM_KERN_ERR 394 arch/um/os-Linux/file.c printk(UM_KERN_ERR "os_pipe : Setting FD_CLOEXEC failed, err = %d\n", UM_KERN_ERR 412 arch/um/os-Linux/file.c printk(UM_KERN_ERR "os_set_fd_async : failed to set O_ASYNC " UM_KERN_ERR 420 arch/um/os-Linux/file.c printk(UM_KERN_ERR "os_set_fd_async : Failed to fcntl F_SETOWN " UM_KERN_ERR 528 arch/um/os-Linux/file.c printk(UM_KERN_ERR "rcv_fd didn't receive anything, " UM_KERN_ERR 534 arch/um/os-Linux/file.c printk(UM_KERN_ERR "rcv_fd didn't receive a descriptor\n"); UM_KERN_ERR 554 arch/um/os-Linux/file.c printk(UM_KERN_ERR "create_unix_socket : " UM_KERN_ERR 594 arch/um/os-Linux/file.c printk(UM_KERN_ERR "F_SETLK failed, file already locked by pid %d\n", UM_KERN_ERR 55 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : pipe failed, errno = %d\n", UM_KERN_ERR 62 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : setting FD_CLOEXEC failed, " UM_KERN_ERR 77 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : clone failed, errno = %d\n", UM_KERN_ERR 95 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : read on pipe failed, " UM_KERN_ERR 127 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper_thread : clone failed, " UM_KERN_ERR 135 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper_thread - wait failed, " UM_KERN_ERR 140 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper_thread - thread " UM_KERN_ERR 155 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "helper_wait : waitpid process %d failed, " UM_KERN_ERR 159 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "helper_wait : process %d exited with " UM_KERN_ERR 79 arch/um/os-Linux/irq.c UM_KERN_ERR "os_waiting_for_events:" UM_KERN_ERR 119 arch/um/os-Linux/irq.c printk(UM_KERN_ERR UM_KERN_ERR 36 arch/um/os-Linux/process.c printk(UM_KERN_ERR "os_process_pc - couldn't open '%s', " UM_KERN_ERR 42 arch/um/os-Linux/process.c printk(UM_KERN_ERR "os_process_pc - couldn't read '%s', " UM_KERN_ERR 51 arch/um/os-Linux/process.c printk(UM_KERN_ERR "os_process_pc - couldn't find pc in '%s'\n", UM_KERN_ERR 71 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Couldn't open '%s', errno = %d\n", stat, UM_KERN_ERR 80 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Couldn't read '%s', errno = %d\n", stat, UM_KERN_ERR 88 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Failed to scan '%s'\n", data); UM_KERN_ERR 197 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Creating test memory file failed, " UM_KERN_ERR 205 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Mapping test memory file failed, " UM_KERN_ERR 211 arch/um/os-Linux/process.c printk(UM_KERN_ERR "MADV_REMOVE failed, err = %d\n", -errno); UM_KERN_ERR 65 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_thread : poll returned " UM_KERN_ERR 76 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR UM_KERN_ERR 94 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_thread : " UM_KERN_ERR 112 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "need_poll : failed to allocate new " UM_KERN_ERR 138 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "update_thread : write failed, err = %d\n", UM_KERN_ERR 145 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "update_thread : read failed, err = %d\n", UM_KERN_ERR 246 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "setup_initial_poll : failed to allocate " UM_KERN_ERR 274 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_workaround - os_pipe 1 failed, " UM_KERN_ERR 280 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_workaround - os_pipe 2 failed, " UM_KERN_ERR 348 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "maybe_sigio_broken - failed to add pollfd " UM_KERN_ERR 437 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio failed, errno = %d\n", UM_KERN_ERR 446 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio failed to allocate a " UM_KERN_ERR 454 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : raw failed, errno = %d\n", UM_KERN_ERR 461 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigio_async failed, " UM_KERN_ERR 467 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigaction 1 failed, " UM_KERN_ERR 475 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigaction 2 failed, " UM_KERN_ERR 487 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigaction 3 failed, " UM_KERN_ERR 502 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n", UM_KERN_ERR 58 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "Registers - \n"); UM_KERN_ERR 60 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "\t%d\t0x%lx\n", i, syscall_regs[i]); UM_KERN_ERR 82 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "do_syscall_stub : ret = %ld, offset = %ld, " UM_KERN_ERR 85 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "do_syscall_stub: syscall %ld failed, " UM_KERN_ERR 88 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR " syscall parameters: " UM_KERN_ERR 94 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR " additional syscall " UM_KERN_ERR 97 arch/um/os-Linux/skas/mem.c printk("\n" UM_KERN_ERR " "); UM_KERN_ERR 39 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Stub registers -\n"); UM_KERN_ERR 41 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "\t%d - %lx\n", i, regs[i]); UM_KERN_ERR 69 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "wait_stub_done : continue failed, " UM_KERN_ERR 81 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to get registers from stub, " UM_KERN_ERR 83 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "wait_stub_done : failed to wait for SIGTRAP, " UM_KERN_ERR 97 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "save_fp_registers returned %d\n", UM_KERN_ERR 103 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to continue stub, pid = %d, " UM_KERN_ERR 117 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "put_fp_registers returned %d\n", UM_KERN_ERR 146 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "handle_trap - nullifying syscall " UM_KERN_ERR 153 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "handle_trap - continuing to end of " UM_KERN_ERR 163 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to get registers " UM_KERN_ERR 165 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "handle_trap - failed to wait at " UM_KERN_ERR 211 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "mapping mmap stub at 0x%lx failed, " UM_KERN_ERR 222 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "mapping segfault stack " UM_KERN_ERR 241 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace_tramp - setting SIGSEGV " UM_KERN_ERR 276 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : mmap failed, " UM_KERN_ERR 290 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : clone failed, " UM_KERN_ERR 299 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : wait failed, " UM_KERN_ERR 307 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : expected SIGSTOP, got " UM_KERN_ERR 315 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : PTRACE_OLDSETOPTIONS " UM_KERN_ERR 322 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : munmap failed, " UM_KERN_ERR 355 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - ptrace set regs " UM_KERN_ERR 361 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - ptrace set fp regs " UM_KERN_ERR 373 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - ptrace continue " UM_KERN_ERR 380 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - wait failed, " UM_KERN_ERR 387 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - PTRACE_GETREGS failed, " UM_KERN_ERR 393 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - get_fp_registers failed, " UM_KERN_ERR 433 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - child stopped " UM_KERN_ERR 488 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 : PTRACE_SETREGS " UM_KERN_ERR 495 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers " UM_KERN_ERR 510 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to continue new process, pid = %d, " UM_KERN_ERR 519 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 - stub-parent reports " UM_KERN_ERR 530 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 - stub-child reports " UM_KERN_ERR 539 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 : PTRACE_OLDSETOPTIONS " UM_KERN_ERR 608 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Bad sigsetjmp return in " UM_KERN_ERR 615 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "impossible long jump!"); UM_KERN_ERR 35 arch/um/os-Linux/tty.c printk(UM_KERN_ERR "get_pty : Couldn't open /dev/ptmx - " UM_KERN_ERR 45 arch/um/os-Linux/tty.c printk(UM_KERN_ERR "get_pty : Couldn't grant pty - " UM_KERN_ERR 52 arch/um/os-Linux/tty.c printk(UM_KERN_ERR "get_pty : Couldn't unlock pty - " UM_KERN_ERR 38 arch/um/os-Linux/umid.c printk(UM_KERN_ERR UM_KERN_ERR 54 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "%s : malloc failed, errno = %d\n", UM_KERN_ERR 61 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Failed to mkdir '%s': %s\n", UM_KERN_ERR 150 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used - pid filename too long\n"); UM_KERN_ERR 160 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't open pid " UM_KERN_ERR 169 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file " UM_KERN_ERR 173 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file " UM_KERN_ERR 180 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't parse pid file " UM_KERN_ERR 186 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "umid \"%s\" is already in use by pid %d\n", UM_KERN_ERR 212 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used - remove_files_and_dir " UM_KERN_ERR 232 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Open of machine pid file \"%s\" failed: " UM_KERN_ERR 240 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Write of pid file failed - err = %d\n", UM_KERN_ERR 276 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "make_umid - mkstemp(%s) failed: " UM_KERN_ERR 311 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Failed to create '%s' - err = %d\n", umid, UM_KERN_ERR 334 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Failed to initialize umid \"%s\", trying with a " UM_KERN_ERR 354 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "umid_file_name : buffer too short\n"); UM_KERN_ERR 56 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "SIGILL in init, could not read " UM_KERN_ERR 65 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "SIGILL caused by cmov, which this " UM_KERN_ERR 69 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "SIGILL caused by cmov, which this " UM_KERN_ERR 72 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "Bad value for host_has_cmov (%d)", UM_KERN_ERR 164 arch/x86/um/os-Linux/registers.c printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",