UART_FCR_CLEAR_XMIT   69 arch/powerpc/boot/virtex.c 				UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
UART_FCR_CLEAR_XMIT   99 arch/powerpc/platforms/embedded6xx/ls_uart.c 	      UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);	/* clear FIFOs */
UART_FCR_CLEAR_XMIT  624 drivers/mmc/core/sdio_uart.c 		       UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  701 drivers/mmc/core/sdio_uart.c 				 UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  885 drivers/tty/mxser.c 			UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_XMIT  888 drivers/tty/mxser.c 		outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
UART_FCR_CLEAR_XMIT  978 drivers/tty/mxser.c 		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_XMIT  982 drivers/tty/mxser.c 		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
UART_FCR_CLEAR_XMIT 1028 drivers/tty/mxser.c 	outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
UART_FCR_CLEAR_XMIT  117 drivers/tty/serial/8250/8250_ingenic.c 	early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_XMIT  161 drivers/tty/serial/8250/8250_mtk.c 		UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  181 drivers/tty/serial/8250/8250_omap.c 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_XMIT  620 drivers/tty/serial/8250/8250_omap.c 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  695 drivers/tty/serial/8250/8250_omap.c 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  292 drivers/tty/serial/8250/8250_port.c 				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
UART_FCR_CLEAR_XMIT  300 drivers/tty/serial/8250/8250_port.c 				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
UART_FCR_CLEAR_XMIT  559 drivers/tty/serial/8250/8250_port.c 			       UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  819 drivers/tty/serial/8250/8250_port.c 		    UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  615 drivers/tty/serial/jsm/jsm_cls.c 	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
UART_FCR_CLEAR_XMIT  621 drivers/tty/serial/jsm/jsm_cls.c 		if (tmp & UART_FCR_CLEAR_XMIT) {
UART_FCR_CLEAR_XMIT  885 drivers/tty/serial/jsm/jsm_cls.c 	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
UART_FCR_CLEAR_XMIT  629 drivers/tty/serial/jsm/jsm_neo.c 	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
UART_FCR_CLEAR_XMIT  635 drivers/tty/serial/jsm/jsm_neo.c 		if (tmp & UART_FCR_CLEAR_XMIT) {
UART_FCR_CLEAR_XMIT 1307 drivers/tty/serial/jsm/jsm_neo.c 	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
UART_FCR_CLEAR_XMIT  194 drivers/tty/serial/omap-serial.c 		       UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT 1801 drivers/tty/serial/omap-serial.c 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_XMIT  359 drivers/tty/serial/pxa.c 			UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  423 drivers/tty/serial/pxa.c 				  UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  309 drivers/tty/serial/serial-tegra.c 		fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  315 drivers/tty/serial/serial-tegra.c 		fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  956 drivers/tty/serial/serial-tegra.c 	tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
UART_FCR_CLEAR_XMIT  654 drivers/tty/serial/sunsu.c 				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  759 drivers/tty/serial/sunsu.c 				  UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT 1180 drivers/tty/serial/sunsu.c 				     UART_FCR_CLEAR_XMIT));
UART_FCR_CLEAR_XMIT  141 drivers/tty/serial/vr41xx_siu.c 	                          UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  495 drivers/usb/serial/f81232.c 			UART_FCR_CLEAR_XMIT;
UART_FCR_CLEAR_XMIT  780 drivers/usb/serial/f81534.c 				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT 1087 drivers/usb/serial/f81534.c 				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
UART_FCR_CLEAR_XMIT  374 samples/vfio-mdev/mtty.c 		if (data & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT)) {
UART_FCR_CLEAR_XMIT  373 sound/drivers/serial-u16550.c 	     | UART_FCR_CLEAR_XMIT	/* Clear transmitter FIFO */