UART1_REG         194 arch/arm/mach-orion5x/kurobox_pro-setup.c 		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
UART1_REG         202 arch/arm/mach-orion5x/kurobox_pro-setup.c 		buf[i] = readl(UART1_REG(RX));
UART1_REG         214 arch/arm/mach-orion5x/kurobox_pro-setup.c 		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
UART1_REG         216 arch/arm/mach-orion5x/kurobox_pro-setup.c 		writel(buf[i++], UART1_REG(TX));
UART1_REG         300 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel(0x83, UART1_REG(LCR));
UART1_REG         301 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel(divisor & 0xff, UART1_REG(DLL));
UART1_REG         302 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
UART1_REG         303 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel(0x1b, UART1_REG(LCR));
UART1_REG         304 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel(0x00, UART1_REG(IER));
UART1_REG         305 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel(0x07, UART1_REG(FCR));
UART1_REG         306 arch/arm/mach-orion5x/kurobox_pro-setup.c 	writel(0x00, UART1_REG(MCR));
UART1_REG         169 arch/arm/mach-orion5x/terastation_pro2-setup.c 		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
UART1_REG         177 arch/arm/mach-orion5x/terastation_pro2-setup.c 		buf[i] = readl(UART1_REG(RX));
UART1_REG         189 arch/arm/mach-orion5x/terastation_pro2-setup.c 		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
UART1_REG         191 arch/arm/mach-orion5x/terastation_pro2-setup.c 		writel(buf[i++], UART1_REG(TX));
UART1_REG         275 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel(0x83, UART1_REG(LCR));
UART1_REG         276 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel(divisor & 0xff, UART1_REG(DLL));
UART1_REG         277 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
UART1_REG         278 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel(0x1b, UART1_REG(LCR));
UART1_REG         279 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel(0x00, UART1_REG(IER));
UART1_REG         280 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel(0x07, UART1_REG(FCR));
UART1_REG         281 arch/arm/mach-orion5x/terastation_pro2-setup.c 	writel(0x00, UART1_REG(MCR));
UART1_REG          32 arch/arm/mach-orion5x/tsx09-common.c 	writel(0x83, UART1_REG(LCR));
UART1_REG          33 arch/arm/mach-orion5x/tsx09-common.c 	writel(divisor & 0xff, UART1_REG(DLL));
UART1_REG          34 arch/arm/mach-orion5x/tsx09-common.c 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
UART1_REG          35 arch/arm/mach-orion5x/tsx09-common.c 	writel(0x03, UART1_REG(LCR));
UART1_REG          36 arch/arm/mach-orion5x/tsx09-common.c 	writel(0x00, UART1_REG(IER));
UART1_REG          37 arch/arm/mach-orion5x/tsx09-common.c 	writel(0x00, UART1_REG(FCR));
UART1_REG          38 arch/arm/mach-orion5x/tsx09-common.c 	writel(0x00, UART1_REG(MCR));
UART1_REG          41 arch/arm/mach-orion5x/tsx09-common.c 	writel('A', UART1_REG(TX));
UART1_REG          61 drivers/power/reset/qnap-poweroff.c 	writel(0x83, UART1_REG(LCR));
UART1_REG          62 drivers/power/reset/qnap-poweroff.c 	writel(divisor & 0xff, UART1_REG(DLL));
UART1_REG          63 drivers/power/reset/qnap-poweroff.c 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
UART1_REG          64 drivers/power/reset/qnap-poweroff.c 	writel(0x03, UART1_REG(LCR));
UART1_REG          65 drivers/power/reset/qnap-poweroff.c 	writel(0x00, UART1_REG(IER));
UART1_REG          66 drivers/power/reset/qnap-poweroff.c 	writel(0x00, UART1_REG(FCR));
UART1_REG          67 drivers/power/reset/qnap-poweroff.c 	writel(0x00, UART1_REG(MCR));
UART1_REG          70 drivers/power/reset/qnap-poweroff.c 	writel(cfg->cmd, UART1_REG(TX));