TW_PRINTK 310 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Found unaligned address during AEN drain"); TW_PRINTK 320 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Error posting request sense"); TW_PRINTK 326 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "No valid response while draining AEN queue"); TW_PRINTK 451 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "Post failed while reading AEN queue"); TW_PRINTK 526 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); TW_PRINTK 531 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x6, "Failed to allocate correctly aligned memory"); TW_PRINTK 585 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "Initconnection failed while checking SRL"); TW_PRINTK 602 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Initconnection (base mode) failed while checking SRL"); TW_PRINTK 607 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x32, "Firmware and driver incompatibility: please upgrade firmware"); TW_PRINTK 609 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x33, "Firmware and driver incompatibility: please upgrade driver"); TW_PRINTK 909 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "PCI Parity Error: clearing"); TW_PRINTK 914 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "PCI Abort: clearing"); TW_PRINTK 923 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing"); TW_PRINTK 929 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing"); TW_PRINTK 1089 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "No valid response during get param") TW_PRINTK 1153 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "No valid response during init connection"); TW_PRINTK 1178 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Command packet memory allocation failed"); TW_PRINTK 1184 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x17, "Generic memory allocation failed"); TW_PRINTK 1191 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x18, "Event info memory allocation failed"); TW_PRINTK 1277 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x19, "Found request id that wasn't pending"); TW_PRINTK 1316 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted"); TW_PRINTK 1326 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt"); TW_PRINTK 1429 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "Found unexpected request id while polling for response"); TW_PRINTK 1643 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence"); TW_PRINTK 1652 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Microcontroller not ready during reset sequence"); TW_PRINTK 1660 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Response queue empty failed during reset sequence"); TW_PRINTK 1670 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Compatibility check failed during reset sequence"); TW_PRINTK 1683 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x22, "AEN drain failed during reset sequence"); TW_PRINTK 1741 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset"); TW_PRINTK 1870 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2e, "Found unaligned sgl address during execute scsi"); TW_PRINTK 1883 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2f, "Found unaligned sgl address during internal post"); TW_PRINTK 1950 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x31, "Connection shutdown failed"); TW_PRINTK 2016 drivers/scsi/3w-9xxx.c TW_PRINTK(host, TW_DRIVER, 0x34, "Failed to enable pci device"); TW_PRINTK 2027 drivers/scsi/3w-9xxx.c TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma mask"); TW_PRINTK 2034 drivers/scsi/3w-9xxx.c TW_PRINTK(host, TW_DRIVER, 0x24, "Failed to allocate memory for device extension"); TW_PRINTK 2045 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x25, "Failed to initialize device extension"); TW_PRINTK 2053 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Failed to get mem region"); TW_PRINTK 2068 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap"); TW_PRINTK 2098 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed"); TW_PRINTK 2123 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x30, "Error requesting IRQ"); TW_PRINTK 2138 drivers/scsi/3w-9xxx.c TW_PRINTK(host, TW_DRIVER, 0x29, "Failed to register character device"); TW_PRINTK 2211 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x38, "Connection shutdown failed during suspend"); TW_PRINTK 2238 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume"); TW_PRINTK 2249 drivers/scsi/3w-9xxx.c TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume"); TW_PRINTK 2263 drivers/scsi/3w-9xxx.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x42, "Error requesting IRQ during resume"); TW_PRINTK 400 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue"); TW_PRINTK 591 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense"); TW_PRINTK 597 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue"); TW_PRINTK 653 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); TW_PRINTK 959 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param") TW_PRINTK 1015 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection"); TW_PRINTK 1040 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed"); TW_PRINTK 1046 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed"); TW_PRINTK 1052 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed"); TW_PRINTK 1059 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed"); TW_PRINTK 1093 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing"); TW_PRINTK 1194 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted"); TW_PRINTK 1204 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt"); TW_PRINTK 1278 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence"); TW_PRINTK 1283 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence"); TW_PRINTK 1296 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL"); TW_PRINTK 1316 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers"); TW_PRINTK 1324 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence"); TW_PRINTK 1449 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset"); TW_PRINTK 1507 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed"); TW_PRINTK 1569 drivers/scsi/3w-sas.c TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device"); TW_PRINTK 1580 drivers/scsi/3w-sas.c TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask"); TW_PRINTK 1587 drivers/scsi/3w-sas.c TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension"); TW_PRINTK 1598 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension"); TW_PRINTK 1606 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region"); TW_PRINTK 1613 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap"); TW_PRINTK 1623 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe"); TW_PRINTK 1637 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed"); TW_PRINTK 1669 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ"); TW_PRINTK 1684 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read"); TW_PRINTK 1686 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info"); TW_PRINTK 1690 drivers/scsi/3w-sas.c TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device"); TW_PRINTK 1774 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend"); TW_PRINTK 1803 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume"); TW_PRINTK 1814 drivers/scsi/3w-sas.c TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume"); TW_PRINTK 1828 drivers/scsi/3w-sas.c TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume");