PRINTD 297 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_REGS, "wr: %08zx <- %08x", addr, data); PRINTD 311 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_REGS, "rd: %08zx -> %08x", addr, data); PRINTD 317 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_REGS, "wr: %08zx <- %08x b[%08x]", addr, data, be); PRINTD 332 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_REGS, "rd: %08zx -> %08x b[%08x]", addr, data, be); PRINTD 342 drivers/atm/ambassador.c PRINTD (DBG_REGS, "reading PLX control: "); PRINTD 345 drivers/atm/ambassador.c PRINTD (DBG_REGS, "reading mailboxes: "); PRINTD 348 drivers/atm/ambassador.c PRINTD (DBG_REGS, "reading doorb irqev irqen reset:"); PRINTD 439 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_TX, "tx_complete %p %p", dev, tx); PRINTD 463 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_RX, "rx_complete %p %p (len=%hu)", dev, rx, rx_len); PRINTD 491 drivers/atm/ambassador.c PRINTD (DBG_INFO|DBG_RX, "dropped thanks to atm_charge (vc %hu, truesize %u)", vc, skb->truesize); PRINTD 502 drivers/atm/ambassador.c PRINTD (DBG_WARN|DBG_RX, "got frame but RX closed for channel %hu", vc); PRINTD 546 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_CMD, "command_do %p", dev); PRINTD 557 drivers/atm/ambassador.c PRINTD (DBG_CMD, "command in slot %p", my_slot); PRINTD 580 drivers/atm/ambassador.c PRINTD (DBG_CMD, "wait: command slot (now at %p)", ptrs->out); PRINTD 587 drivers/atm/ambassador.c PRINTD (DBG_CMD, "wait: command slot completion"); PRINTD 592 drivers/atm/ambassador.c PRINTD (DBG_CMD, "command complete"); PRINTD 616 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_TX, "tx_give %p", dev); PRINTD 624 drivers/atm/ambassador.c PRINTD (DBG_TX, "TX in slot %p", txq->in.ptr); PRINTD 648 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_TX, "tx_take %p", dev); PRINTD 676 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_RX, "rx_give %p[%hu]", dev, pool); PRINTD 681 drivers/atm/ambassador.c PRINTD (DBG_RX, "RX in slot %p", rxq->in.ptr); PRINTD 701 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_RX, "rx_take %p[%hu]", dev, pool); PRINTD 733 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pool %p %hu", dev, pool); PRINTD 759 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pools %p", dev); PRINTD 771 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_POOL, "fill_rx_pool %p %hu %x", dev, pool, priority); PRINTD 781 drivers/atm/ambassador.c PRINTD (DBG_SKB|DBG_POOL, "failed to allocate skb for RX pool %hu", pool); PRINTD 789 drivers/atm/ambassador.c PRINTD (DBG_SKB, "allocated skb at %p, head %p, area %li", PRINTD 805 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_POOL, "fill_rx_pools %p", dev); PRINTD 834 drivers/atm/ambassador.c PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler: %p", dev_id); PRINTD 841 drivers/atm/ambassador.c PRINTD (DBG_IRQ, "irq not for me: %d", irq); PRINTD 846 drivers/atm/ambassador.c PRINTD (DBG_IRQ, "FYI: interrupt was %08x", interrupt); PRINTD 862 drivers/atm/ambassador.c PRINTD (DBG_IRQ, "work done: %u", irq_work); PRINTD 864 drivers/atm/ambassador.c PRINTD (DBG_IRQ|DBG_WARN, "no work done"); PRINTD 868 drivers/atm/ambassador.c PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id); PRINTD 879 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_QOS, "make_rate %u", rate); PRINTD 978 drivers/atm/ambassador.c PRINTD (DBG_QOS, "rate: man=%u, exp=%hu", man, exp); PRINTD 1015 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_VCC, "amb_open %x %x", vpi, vci); PRINTD 1027 drivers/atm/ambassador.c PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci); PRINTD 1034 drivers/atm/ambassador.c PRINTD (DBG_QOS, "AAL not supported"); PRINTD 1040 drivers/atm/ambassador.c PRINTD (DBG_QOS, "TX:"); PRINTD 1071 drivers/atm/ambassador.c PRINTD (DBG_QOS, "pcr goal = %d", pcr); PRINTD 1077 drivers/atm/ambassador.c PRINTD (DBG_QOS, "request for non-UBR denied"); PRINTD 1081 drivers/atm/ambassador.c PRINTD (DBG_QOS, "tx_rate_bits=%hx, tx_vc_bits=%hx", PRINTD 1085 drivers/atm/ambassador.c PRINTD (DBG_QOS, "RX:"); PRINTD 1093 drivers/atm/ambassador.c PRINTD (DBG_VCC|DBG_QOS|DBG_POOL, "chose pool %hu (max_sdu %u <= %u)", PRINTD 1098 drivers/atm/ambassador.c PRINTD (DBG_WARN|DBG_VCC|DBG_QOS|DBG_POOL, PRINTD 1111 drivers/atm/ambassador.c PRINTD (DBG_QOS, "pcr goal = %d", pcr); PRINTD 1117 drivers/atm/ambassador.c PRINTD (DBG_QOS, "request for non-UBR denied"); PRINTD 1218 drivers/atm/ambassador.c PRINTD (DBG_VCC|DBG_FLOW, "amb_close"); PRINTD 1305 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_TX, "amb_send vc %x data %p len %u", PRINTD 1340 drivers/atm/ambassador.c PRINTD (DBG_TX, "fragment list allocated at %p", tx_descr); PRINTD 1384 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_SKB, "amb_rx_free skb %p (atm_vcc %p, vcc %p)", PRINTD 1396 drivers/atm/ambassador.c PRINTD (DBG_SKB|DBG_POOL, "recycled skb for pool %hu", pool); PRINTD 1414 drivers/atm/ambassador.c PRINTD (DBG_FLOW, "amb_proc_read"); PRINTD 1503 drivers/atm/ambassador.c PRINTD (DBG_FLOW, "create_queues %p", dev); PRINTD 1524 drivers/atm/ambassador.c PRINTD (DBG_INIT, "queues from %p to %p", memory, limit); PRINTD 1526 drivers/atm/ambassador.c PRINTD (DBG_CMD, "command queue at %p", memory); PRINTD 1544 drivers/atm/ambassador.c PRINTD (DBG_TX, "TX queue pair at %p", memory); PRINTD 1570 drivers/atm/ambassador.c PRINTD (DBG_RX, "RX queue pairs at %p", memory); PRINTD 1616 drivers/atm/ambassador.c PRINTD (DBG_FLOW, "destroy_queues %p", dev); PRINTD 1618 drivers/atm/ambassador.c PRINTD (DBG_INIT, "freeing queues at %p", memory); PRINTD 1715 drivers/atm/ambassador.c PRINTD (DBG_LOAD|DBG_ERR, PRINTD 1731 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "do_loader_command"); PRINTD 1755 drivers/atm/ambassador.c PRINTD (DBG_LOAD|DBG_ERR, "command %d timed out", cmd); PRINTD 1768 drivers/atm/ambassador.c PRINTD (DBG_LOAD|DBG_ERR, "start command did not clear doorbell, res=%08x", PRINTD 1787 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "get_loader_version"); PRINTD 1804 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "loader_write"); PRINTD 1820 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "loader_verify"); PRINTD 1834 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "loader_start"); PRINTD 1850 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "amb_reset"); PRINTD 1878 drivers/atm/ambassador.c PRINTD (DBG_LOAD|DBG_ERR, "reset timed out"); PRINTD 1932 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_LOAD, "ucode_init"); PRINTD 1935 drivers/atm/ambassador.c PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr), PRINTD 1977 drivers/atm/ambassador.c PRINTD (DBG_FLOW, "amb_talk %p", dev); PRINTD 2011 drivers/atm/ambassador.c PRINTD (DBG_INIT|DBG_ERR, "adapter init timed out"); PRINTD 2048 drivers/atm/ambassador.c PRINTD (DBG_LOAD, "BIA: lower4: %08x, upper2 %04x", lower4, upper2); PRINTD 2200 drivers/atm/ambassador.c PRINTD (DBG_INFO, "found Madge ATM adapter (amb) at" PRINTD 2239 drivers/atm/ambassador.c PRINTD (DBG_ERR, "failed to register Madge ATM adapter"); PRINTD 2244 drivers/atm/ambassador.c PRINTD (DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p", PRINTD 2284 drivers/atm/ambassador.c PRINTD(DBG_INFO|DBG_INIT, "closing %p (atm_dev = %p)", dev, dev->atm_dev); PRINTD 2378 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_INIT, "init_module"); PRINTD 2394 drivers/atm/ambassador.c PRINTD (DBG_FLOW|DBG_INIT, "cleanup_module"); PRINTD 467 drivers/atm/horizon.c PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG)); PRINTD 468 drivers/atm/horizon.c PRINTD (DBG_REGS, "RX CONFIG: %#x", rd_regw (dev, RX_CONFIG_OFF)); PRINTD 469 drivers/atm/horizon.c PRINTD (DBG_REGS, "TX CONFIG: %#x", rd_regw (dev, TX_CONFIG_OFF)); PRINTD 470 drivers/atm/horizon.c PRINTD (DBG_REGS, "TX STATUS: %#x", rd_regw (dev, TX_STATUS_OFF)); PRINTD 471 drivers/atm/horizon.c PRINTD (DBG_REGS, "IRQ ENBLE: %#x", rd_regl (dev, INT_ENABLE_REG_OFF)); PRINTD 472 drivers/atm/horizon.c PRINTD (DBG_REGS, "IRQ SORCE: %#x", rd_regl (dev, INT_SOURCE_REG_OFF)); PRINTD 588 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c, PRINTD 593 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!"); PRINTD 626 drivers/atm/horizon.c PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div); PRINTD 650 drivers/atm/horizon.c PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div); PRINTD 661 drivers/atm/horizon.c PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div); PRINTD 665 drivers/atm/horizon.c PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u", PRINTD 673 drivers/atm/horizon.c PRINTD (DBG_QOS, "actual rate: %u", *actual); PRINTD 683 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u", PRINTD 715 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_open_rx %x", channel); PRINTD 723 drivers/atm/horizon.c PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open"); PRINTD 730 drivers/atm/horizon.c PRINTD (DBG_VCC, "using a spare buffer: %u", buf_ptr); PRINTD 734 drivers/atm/horizon.c PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE"); PRINTD 738 drivers/atm/horizon.c PRINTD (DBG_VCC, "using IDLE buffer pointer"); PRINTD 755 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_open_rx ok"); PRINTD 797 drivers/atm/horizon.c PRINTD (DBG_VCC, "closing VC: RX channel %u already disabled", vc); PRINTD 872 drivers/atm/horizon.c PRINTD (DBG_VCC|DBG_RX, "r1 = %u, r2 = %u", r1, r2); PRINTD 885 drivers/atm/horizon.c PRINTD (DBG_VCC|DBG_RX, "rd_ptr = %u, wr_ptr = %u", rd_ptr, wr_ptr); PRINTD 893 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_VCC|DBG_WARN, "marking a frame as dodgey"); PRINTD 933 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_WARN, "RX error: other PCI Bus Master RX still in progress!"); PRINTD 935 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion"); PRINTD 951 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_BUS, "(pio)"); PRINTD 955 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)"); PRINTD 958 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_BUS, "(continuing multi)"); PRINTD 980 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_BUS, "(pio)"); PRINTD 984 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_BUS, "(full region)"); PRINTD 987 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_BUS, "(start multi region)"); PRINTD 1002 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_SKB, "push %p %u", skb->data, skb->len); PRINTD 1032 drivers/atm/horizon.c PRINTD (DBG_RX, "cleared rx_busy for dev %p", dev); PRINTD 1054 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion"); PRINTD 1064 drivers/atm/horizon.c PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags); PRINTD 1066 drivers/atm/horizon.c PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags); PRINTD 1069 drivers/atm/horizon.c PRINTD (DBG_TX, "set tx_busy for dev %p", dev); PRINTD 1077 drivers/atm/horizon.c PRINTD (DBG_TX, "cleared tx_busy for dev %p", dev); PRINTD 1099 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_WARN, "TX error: other PCI Bus Master TX still in progress!"); PRINTD 1101 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion"); PRINTD 1113 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "(pio)"); PRINTD 1117 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)"); PRINTD 1124 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "(continuing multi)"); PRINTD 1141 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "(pio)"); PRINTD 1145 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "(full region)"); PRINTD 1148 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "(start multi region)"); PRINTD 1210 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion"); PRINTD 1242 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_data_av_handler"); PRINTD 1246 drivers/atm/horizon.c PRINTD (DBG_RX, "locked out of rx lock"); PRINTD 1249 drivers/atm/horizon.c PRINTD (DBG_RX, "set rx_busy for dev %p", dev); PRINTD 1263 drivers/atm/horizon.c PRINTD (DBG_RX, "rx_queue_entry is: %#x", rx_queue_entry); PRINTD 1274 drivers/atm/horizon.c PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!"); PRINTD 1279 drivers/atm/horizon.c PRINTD (DBG_RX, "got a frame on rx_channel %x len %u", rx_channel, rx_len); PRINTD 1307 drivers/atm/horizon.c PRINTD (DBG_RX, "RX start simple transfer (addr %p, len %d)", PRINTD 1315 drivers/atm/horizon.c PRINTD (DBG_SKB|DBG_WARN, "failed to get skb"); PRINTD 1329 drivers/atm/horizon.c PRINTD (DBG_WARN|DBG_VCC|DBG_RX, "no VCC for this frame (VC closed)"); PRINTD 1354 drivers/atm/horizon.c PRINTD (DBG_FLOW, "interrupt_handler: %p", dev_id); PRINTD 1378 drivers/atm/horizon.c PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted"); PRINTD 1383 drivers/atm/horizon.c PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted"); PRINTD 1388 drivers/atm/horizon.c PRINTD (DBG_IRQ|DBG_RX, "rx_data_av asserted"); PRINTD 1393 drivers/atm/horizon.c PRINTD (DBG_IRQ, "work done: %u", irq_ok); PRINTD 1395 drivers/atm/horizon.c PRINTD (DBG_IRQ|DBG_WARN, "spurious interrupt source: %#x", int_source); PRINTD 1398 drivers/atm/horizon.c PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id); PRINTD 1428 drivers/atm/horizon.c PRINTD (DBG_FLOW|DBG_TX, "setup_idle_tx_channel %p", dev); PRINTD 1434 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_WARN, "waiting for idle TX channel"); PRINTD 1437 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel"); PRINTD 1507 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!"); PRINTD 1511 drivers/atm/horizon.c PRINTD (DBG_TX, "TX buffer pointers are: rd %x, wr %x.", PRINTD 1516 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0"); PRINTD 1521 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34"); PRINTD 1560 drivers/atm/horizon.c PRINTD (DBG_FLOW|DBG_TX, "hrz_send vc %x data %p len %u", PRINTD 1581 drivers/atm/horizon.c PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel"); PRINTD 1592 drivers/atm/horizon.c PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)"); PRINTD 1633 drivers/atm/horizon.c PRINTD (DBG_TX, "waiting for free TX buffers, got %d of %d", PRINTD 1640 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d", PRINTD 1650 drivers/atm/horizon.c PRINTD (DBG_TX, "last vc hack: hit"); PRINTD 1653 drivers/atm/horizon.c PRINTD (DBG_TX, "last vc hack: miss"); PRINTD 1657 drivers/atm/horizon.c PRINTD (DBG_TX, "vc already on channel: hit"); PRINTD 1661 drivers/atm/horizon.c PRINTD (DBG_TX, "vc already on channel: miss"); PRINTD 1665 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_ERR, "failed to get channel"); PRINTD 1671 drivers/atm/horizon.c PRINTD (DBG_TX, "got channel"); PRINTD 1678 drivers/atm/horizon.c PRINTD (DBG_TX, "using channel %u", tx_channel); PRINTD 1695 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)", PRINTD 1706 drivers/atm/horizon.c PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)", PRINTD 1826 drivers/atm/horizon.c PRINTD (DBG_INFO, "ctrl0reg is %#x", ctrl); PRINTD 2032 drivers/atm/horizon.c PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu"); PRINTD 2037 drivers/atm/horizon.c PRINTD (DBG_QOS, "defaulting max_sdu"); PRINTD 2040 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu"); PRINTD 2046 drivers/atm/horizon.c PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default"); PRINTD 2052 drivers/atm/horizon.c PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default"); PRINTD 2066 drivers/atm/horizon.c PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR"); PRINTD 2068 drivers/atm/horizon.c PRINTD (DBG_QOS, "luser gave negative min_pcr"); PRINTD 2070 drivers/atm/horizon.c PRINTD (DBG_QOS, "pcr less than min_pcr"); PRINTD 2076 drivers/atm/horizon.c PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR"); PRINTD 2078 drivers/atm/horizon.c PRINTD (DBG_QOS, "luser gave negative max_pcr"); PRINTD 2080 drivers/atm/horizon.c PRINTD (DBG_QOS, "pcr greater than max_pcr"); PRINTD 2083 drivers/atm/horizon.c PRINTD (DBG_QOS, "xBR(pcr) OK"); PRINTD 2086 drivers/atm/horizon.c PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d", PRINTD 2107 drivers/atm/horizon.c PRINTD (DBG_FLOW|DBG_VCC, "hrz_open %x %x", vpi, vci); PRINTD 2119 drivers/atm/horizon.c PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci); PRINTD 2133 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "AAL0"); PRINTD 2138 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "AAL3/4"); PRINTD 2142 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "AAL5"); PRINTD 2146 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!"); PRINTD 2184 drivers/atm/horizon.c PRINTD (DBG_QOS, "TX:"); PRINTD 2201 drivers/atm/horizon.c PRINTD (DBG_QOS, "TX max_sdu check failed"); PRINTD 2235 drivers/atm/horizon.c PRINTD (DBG_QOS, "snatching all remaining TX bandwidth"); PRINTD 2246 drivers/atm/horizon.c PRINTD (DBG_QOS, "could not make rate from TX PCR"); PRINTD 2252 drivers/atm/horizon.c PRINTD (DBG_QOS, "TX PCR failed consistency check"); PRINTD 2283 drivers/atm/horizon.c PRINTD (DBG_QOS, "snatching all remaining TX bandwidth"); PRINTD 2294 drivers/atm/horizon.c PRINTD (DBG_QOS, "could not make rate from TX SCR"); PRINTD 2300 drivers/atm/horizon.c PRINTD (DBG_QOS, "TX SCR failed consistency check"); PRINTD 2310 drivers/atm/horizon.c PRINTD (DBG_QOS, "shrinking bucket from %u to %u", PRINTD 2320 drivers/atm/horizon.c PRINTD (DBG_QOS, "unsupported TX traffic class"); PRINTD 2328 drivers/atm/horizon.c PRINTD (DBG_QOS, "RX:"); PRINTD 2338 drivers/atm/horizon.c PRINTD (DBG_QOS, "RX max_sdu check failed"); PRINTD 2358 drivers/atm/horizon.c PRINTD (DBG_QOS, "snatching all remaining RX bandwidth"); PRINTD 2367 drivers/atm/horizon.c PRINTD (DBG_QOS, "RX PCR failed consistency check"); PRINTD 2379 drivers/atm/horizon.c PRINTD (DBG_QOS, "snatching all remaining RX bandwidth"); PRINTD 2388 drivers/atm/horizon.c PRINTD (DBG_QOS, "RX SCR failed consistency check"); PRINTD 2395 drivers/atm/horizon.c PRINTD (DBG_QOS, "unsupported RX traffic class"); PRINTD 2404 drivers/atm/horizon.c PRINTD (DBG_QOS, "AAL not supported"); PRINTD 2421 drivers/atm/horizon.c PRINTD (DBG_QOS, "not enough TX PCR left"); PRINTD 2426 drivers/atm/horizon.c PRINTD (DBG_QOS, "not enough RX PCR left"); PRINTD 2434 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR", PRINTD 2441 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources"); PRINTD 2454 drivers/atm/horizon.c PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX"); PRINTD 2482 drivers/atm/horizon.c PRINTD (DBG_VCC|DBG_FLOW, "hrz_close"); PRINTD 2518 drivers/atm/horizon.c PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR", PRINTD 2534 drivers/atm/horizon.c PRINTD (DBG_FLOW|DBG_VCC, "hrz_getsockopt"); PRINTD 2553 drivers/atm/horizon.c PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt"); PRINTD 2573 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_ioctl"); PRINTD 2579 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_phy_get"); PRINTD 2586 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_phy_put"); PRINTD 2591 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_change_qos"); PRINTD 2601 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_proc_read"); PRINTD 2659 drivers/atm/horizon.c PRINTD (DBG_FLOW, "hrz_probe"); PRINTD 2673 drivers/atm/horizon.c PRINTD(DBG_ERR, "out of memory"); PRINTD 2687 drivers/atm/horizon.c PRINTD(DBG_WARN, "request IRQ failed!"); PRINTD 2692 drivers/atm/horizon.c PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p", PRINTD 2698 drivers/atm/horizon.c PRINTD(DBG_ERR, "failed to register Madge ATM adapter"); PRINTD 2703 drivers/atm/horizon.c PRINTD(DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p", PRINTD 2714 drivers/atm/horizon.c PRINTD(DBG_INFO, "%s PCI latency timer from %hu to %hu", PRINTD 2768 drivers/atm/horizon.c PRINTD(DBG_WARN, "Buggy ASIC: no TX bus-mastering."); PRINTD 2807 drivers/atm/horizon.c PRINTD(DBG_INFO, "closing %p (atm_dev = %p)", dev, dev->atm_dev); PRINTD 2887 drivers/atm/horizon.c PRINTD (DBG_FLOW, "cleanup_module"); PRINTD 21 scripts/kconfig/parser.y int cdebug = PRINTD;