PREFIX 311 arch/ia64/kernel/acpi.c printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); PREFIX 581 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Can't find MADT\n"); PREFIX 588 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX PREFIX 622 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Can't find MADT\n"); PREFIX 630 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX PREFIX 635 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); PREFIX 641 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX PREFIX 650 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX PREFIX 655 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX PREFIX 659 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); PREFIX 669 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Can't find FADT\n"); PREFIX 132 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "Unable to map MADT\n"); PREFIX 139 arch/x86/kernel/acpi/boot.c printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", PREFIX 163 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "skipped apicid that is too big\n"); PREFIX 215 arch/x86/kernel/acpi/boot.c pr_warn(PREFIX "x2apic entry ignored\n"); PREFIX 221 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); PREFIX 308 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); PREFIX 326 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); PREFIX 516 arch/x86/kernel/acpi/boot.c printk(PREFIX "BIOS IRQ0 override ignored.\n"); PREFIX 523 arch/x86/kernel/acpi/boot.c printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); PREFIX 599 arch/x86/kernel/acpi/boot.c printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old); PREFIX 756 arch/x86/kernel/acpi/boot.c pr_info(PREFIX "Unable to map lapic to logical cpu number\n"); PREFIX 872 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "HPET timers must be located in " PREFIX 885 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX PREFIX 898 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "HPET id: %#x " PREFIX 905 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX PREFIX 911 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", PREFIX 999 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", PREFIX 1026 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX PREFIX 1059 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX PREFIX 1068 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "No LAPIC entries present\n"); PREFIX 1072 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); PREFIX 1082 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); PREFIX 1181 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "Skipping IOAPIC probe " PREFIX 1189 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); PREFIX 1192 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); PREFIX 1199 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX PREFIX 1220 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); PREFIX 1253 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX PREFIX 1291 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX PREFIX 1302 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX PREFIX 1568 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "acpi=force override\n"); PREFIX 1570 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); PREFIX 109 arch/x86/pci/mmconfig-shared.c pr_info(PREFIX PREFIX 369 arch/x86/pci/mmconfig-shared.c pr_info(PREFIX "%s with MMCONFIG support\n", name); PREFIX 470 arch/x86/pci/mmconfig-shared.c pr_info(PREFIX "MMCONFIG at %pR reserved in %s\n", PREFIX 489 arch/x86/pci/mmconfig-shared.c pr_info(PREFIX PREFIX 512 arch/x86/pci/mmconfig-shared.c pr_info(FW_INFO PREFIX PREFIX 541 arch/x86/pci/mmconfig-shared.c pr_info(PREFIX "not using MMCONFIG\n"); PREFIX 560 arch/x86/pci/mmconfig-shared.c pr_err(PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx " PREFIX 587 arch/x86/pci/mmconfig-shared.c pr_err(PREFIX "MMCONFIG has no entries\n"); PREFIX 601 arch/x86/pci/mmconfig-shared.c pr_warn(PREFIX "no memory for MCFG entries\n"); PREFIX 141 arch/x86/pci/mmconfig_64.c pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res); PREFIX 193 drivers/acpi/ac.c printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded," PREFIX 366 drivers/acpi/ac.c printk(KERN_INFO PREFIX "%s [%s] (%s)\n", PREFIX 443 drivers/acpi/ac.c pr_info(PREFIX "AC: found native %s PMIC, not loading\n", PREFIX 64 drivers/acpi/acpi_cmos_rtc.c pr_err(PREFIX "Error installing CMOS-RTC region handler\n"); PREFIX 75 drivers/acpi/acpi_cmos_rtc.c pr_err(PREFIX "Error removing CMOS-RTC region handler\n"); PREFIX 333 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Invalid _BCL data\n"); PREFIX 678 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Invalid _DDC data\n"); PREFIX 862 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Invalid data\n"); PREFIX 1351 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX PREFIX 1450 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Failed to switch the brightness\n"); PREFIX 1811 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Create sysfs link\n"); PREFIX 1815 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Create sysfs link\n"); PREFIX 2072 drivers/acpi/acpi_video.c printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", PREFIX 1216 drivers/acpi/battery.c pr_warning(PREFIX "Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); PREFIX 1444 drivers/acpi/battery.c pr_info(PREFIX "%s Slot [%s] (battery %s)\n", PREFIX 1528 drivers/acpi/battery.c pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME PREFIX 52 drivers/acpi/blacklist.c pr_err(PREFIX "Vendor \"%6.6s\" System \"%8.8s\" Revision 0x%x has a known ACPI BIOS problem.\n", PREFIX 57 drivers/acpi/blacklist.c pr_err(PREFIX "Reason: %s. This is a %s error\n", PREFIX 76 drivers/acpi/blacklist.c printk(KERN_NOTICE PREFIX "DMI detected: %s (force ACPI _REV to 5)\n", PREFIX 993 drivers/acpi/bus.c printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n"); PREFIX 997 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Using %s for interrupt routing\n", message); PREFIX 1025 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); PREFIX 1046 drivers/acpi/bus.c printk(KERN_ERR PREFIX PREFIX 1053 drivers/acpi/bus.c printk(KERN_ERR PREFIX PREFIX 1100 drivers/acpi/bus.c printk(KERN_ERR PREFIX "Unable to enable ACPI\n"); PREFIX 1129 drivers/acpi/bus.c printk(KERN_ERR PREFIX PREFIX 1148 drivers/acpi/bus.c printk(KERN_ERR PREFIX PREFIX 1155 drivers/acpi/bus.c printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n"); PREFIX 1184 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Interpreter enabled\n"); PREFIX 1203 drivers/acpi/bus.c printk(KERN_ERR PREFIX PREFIX 1231 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Interpreter disabled.\n"); PREFIX 285 drivers/acpi/button.c printk(KERN_ERR PREFIX "More than one Lid device found!\n"); PREFIX 534 drivers/acpi/button.c printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); PREFIX 578 drivers/acpi/button.c printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device)); PREFIX 35 drivers/acpi/cm_sbs.c printk(KERN_ERR PREFIX PREFIX 66 drivers/acpi/cm_sbs.c printk(KERN_ERR PREFIX PREFIX 179 drivers/acpi/event.c printk(KERN_WARNING PREFIX PREFIX 25 drivers/acpi/glue.c printk(KERN_DEBUG PREFIX fmt, ##__VA_ARGS__) PREFIX 30 drivers/acpi/glue.c printk(KERN_DEBUG PREFIX fmt, ##__VA_ARGS__); \ PREFIX 47 drivers/acpi/glue.c printk(KERN_INFO PREFIX "bus type %s registered\n", type->name); PREFIX 62 drivers/acpi/glue.c printk(KERN_INFO PREFIX "bus type %s unregistered\n", PREFIX 209 drivers/acpi/osl.c pr_err(PREFIX "System description tables not found\n"); PREFIX 327 drivers/acpi/osl.c printk(KERN_ERR PREFIX "Cannot map memory that high\n"); PREFIX 422 drivers/acpi/osl.c WARN(true, PREFIX "%s: bad address %p\n", __func__, virt); PREFIX 527 drivers/acpi/osl.c printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n", PREFIX 533 drivers/acpi/osl.c printk(KERN_INFO PREFIX "Overriding _REV return value to 5\n"); PREFIX 574 drivers/acpi/osl.c printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n", PREFIX 582 drivers/acpi/osl.c printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); PREFIX 1120 drivers/acpi/osl.c printk(KERN_ERR PREFIX PREFIX 1354 drivers/acpi/osl.c printk(KERN_ERR PREFIX "Fatal opcode executed\n"); PREFIX 1713 drivers/acpi/osl.c printk(KERN_NOTICE PREFIX PREFIX 1736 drivers/acpi/osl.c pr_debug(PREFIX "%s: map reset_reg status %d\n", __func__, rv); PREFIX 129 drivers/acpi/pci_irq.c printk(KERN_WARNING PREFIX "firmware reports " PREFIX 108 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX PREFIX 126 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX PREFIX 134 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX PREFIX 148 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "_PRS resource type 0x%x isn't an IRQ\n", PREFIX 207 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX PREFIX 216 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "_CRS resource type 0x%x isn't an IRQ\n", PREFIX 244 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Unable to read status\n"); PREFIX 267 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "_CRS returned 0\n"); PREFIX 334 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid Resource_type %d\n", link->irq.resource_type); PREFIX 355 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Unable to read status\n"); PREFIX 359 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX PREFIX 380 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX PREFIX 558 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX "_CRS %d not found" PREFIX 583 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "No IRQ available for %s [%s]. " PREFIX 592 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Unable to set IRQ for %s [%s]. " PREFIX 625 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link device\n"); PREFIX 631 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link context\n"); PREFIX 637 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid index %d\n", index); PREFIX 649 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Link active IRQ is 0!\n"); PREFIX 679 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link device\n"); PREFIX 685 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link context\n"); PREFIX 692 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Link isn't initialized\n"); PREFIX 747 drivers/acpi/pci_link.c printk(KERN_INFO PREFIX "%s [%s] (IRQs", acpi_device_name(device), PREFIX 583 drivers/acpi/pci_root.c pr_info(PREFIX "%s [%s] (domain %04x %pR)\n", PREFIX 677 drivers/acpi/power.c printk(KERN_ERR PREFIX "_DSW execution failed\n"); PREFIX 685 drivers/acpi/power.c printk(KERN_ERR PREFIX "_PSW execution failed\n"); PREFIX 965 drivers/acpi/power.c printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device), PREFIX 210 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PCT data\n"); PREFIX 224 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PCT data (control_register)\n"); PREFIX 240 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PCT data (status_register)\n"); PREFIX 309 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSS data\n"); PREFIX 362 drivers/acpi/processor_perflib.c printk(KERN_ERR FW_BUG PREFIX PREFIX 380 drivers/acpi/processor_perflib.c printk(KERN_ERR FW_BUG PREFIX PREFIX 526 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD data\n"); PREFIX 532 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD data\n"); PREFIX 543 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD data\n"); PREFIX 549 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Unknown _PSD:num_entries\n"); PREFIX 555 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Unknown _PSD:revision\n"); PREFIX 563 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD:coord_type\n"); PREFIX 430 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC data\n"); PREFIX 444 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX PREFIX 461 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC data (status_register)\n"); PREFIX 473 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); PREFIX 480 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); PREFIX 514 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSS data\n"); PREFIX 553 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX PREFIX 594 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSD data\n"); PREFIX 600 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSD data\n"); PREFIX 613 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSD data\n"); PREFIX 619 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown _TSD:num_entries\n"); PREFIX 625 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown _TSD:revision\n"); PREFIX 718 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX PREFIX 739 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX PREFIX 752 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX PREFIX 759 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX PREFIX 791 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown addr space %d\n", PREFIX 824 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown addr space %d\n", PREFIX 933 drivers/acpi/processor_throttling.c printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); PREFIX 550 drivers/acpi/sbs.c printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n", PREFIX 583 drivers/acpi/sbs.c printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n", PREFIX 112 drivers/acpi/sbshc.c printk(KERN_ERR PREFIX "host controller is not configured\n"); PREFIX 257 drivers/acpi/sbshc.c printk(KERN_ERR PREFIX "error obtaining _EC.\n"); PREFIX 657 drivers/acpi/scan.c pr_err(PREFIX "Memory allocation error\n"); PREFIX 703 drivers/acpi/scan.c printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", PREFIX 1257 drivers/acpi/scan.c pr_err(PREFIX "%s: Error reading device info\n", PREFIX 1626 drivers/acpi/scan.c printk(KERN_ERR PREFIX "Memory allocation error\n"); PREFIX 2173 drivers/acpi/scan.c printk(KERN_WARNING PREFIX "STAO table present, but SPCR is missing\n"); PREFIX 2209 drivers/acpi/scan.c printk(KERN_INFO PREFIX "STAO Name List not yet supported."); PREFIX 73 drivers/acpi/sleep.c printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", PREFIX 463 drivers/acpi/sleep.c printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", PREFIX 585 drivers/acpi/sleep.c pr_info(PREFIX "Low-level resume complete\n"); PREFIX 1330 drivers/acpi/sleep.c pr_info(PREFIX "(supports%s)\n", supported); PREFIX 759 drivers/acpi/sysfs.c printk(KERN_WARNING PREFIX PREFIX 1005 drivers/acpi/sysfs.c pr_err(PREFIX "Unable to add hotplug profile '%s'\n", name); PREFIX 305 drivers/acpi/thermal.c pr_warn(PREFIX "Critical threshold %d C\n", PREFIX 378 drivers/acpi/thermal.c pr_warn(PREFIX "Invalid passive threshold\n"); PREFIX 440 drivers/acpi/thermal.c pr_warn(PREFIX "Invalid active%d threshold\n", PREFIX 1089 drivers/acpi/thermal.c pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), PREFIX 1161 drivers/acpi/thermal.c pr_notice(PREFIX "%s detected: " PREFIX 1169 drivers/acpi/thermal.c pr_notice(PREFIX "%s detected: " PREFIX 1177 drivers/acpi/thermal.c pr_notice(PREFIX "%s detected: " PREFIX 1186 drivers/acpi/thermal.c pr_notice(PREFIX "%s detected: " PREFIX 1240 drivers/acpi/thermal.c pr_notice(PREFIX "thermal control disabled\n"); PREFIX 56 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package argument\n"); PREFIX 61 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid format argument\n"); PREFIX 66 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid buffer argument\n"); PREFIX 72 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Format specifies more objects [%d]" PREFIX 102 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package element" PREFIX 127 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package element" PREFIX 142 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package element" PREFIX 133 drivers/input/keyboard/hil_kbd.c printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); PREFIX 214 drivers/input/keyboard/hil_kbd.c printk(KERN_WARNING PREFIX PREFIX 269 drivers/input/keyboard/hil_kbd.c printk(KERN_WARNING PREFIX "errored HIL packet\n"); PREFIX 349 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n", PREFIX 435 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX PREFIX 438 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX PREFIX 513 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX PREFIX 251 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX "new in slot %i\n", rc); PREFIX 263 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX "same in slot %i\n", rc); PREFIX 270 drivers/input/serio/hil_mlc.c printk(KERN_ERR PREFIX "Residual device slots exhausted, close some serios!\n"); PREFIX 420 drivers/input/serio/hil_mlc.c printk(KERN_INFO PREFIX "Device name gotten: %16s\n", PREFIX 627 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX "z%i \n {%i}", doze, mlc->seidx); PREFIX 772 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX " + "); PREFIX 261 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n"); PREFIX 282 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "NMI !\n"); PREFIX 292 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "HIL NMI\n"); PREFIX 321 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "read timeout (%lldus)!\n", PREFIX 623 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "No free slot to add transaction.\n"); PREFIX 627 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Transaction add failed: transaction already queued?\n"); PREFIX 887 drivers/input/serio/hp_sdc.c pr_info(PREFIX "HP SDC at 0x%08lx, IRQ %d (NMI IRQ %d)\n", PREFIX 920 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n", PREFIX 990 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error unregistering HP SDC"); PREFIX 1004 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "HP SDC driver disabled by no_hpsdc=1.\n"); PREFIX 1012 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error registering SDC with system bus tree.\n"); PREFIX 1029 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "No SDC found.\n"); PREFIX 1054 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error reading config byte.\n"); PREFIX 1061 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "New style SDC\n"); PREFIX 1070 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error reading extended config byte.\n"); PREFIX 1075 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "Revision: %s\n", str); PREFIX 1077 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "TI SN76494 beeper present\n"); PREFIX 1079 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "OKI MSM-58321 BBRTC present\n"); PREFIX 1080 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "Spunking the self test register to force PUP " PREFIX 1095 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n", PREFIX 69 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "HIL Overflow!\n"); PREFIX 107 drivers/input/serio/hp_sdc_mlc.c printk(KERN_DEBUG PREFIX "err code %x\n", data); PREFIX 111 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Bastard SDC reconfigured loop!\n"); PREFIX 124 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Bastard SDC decided to reconfigure loop!\n"); PREFIX 128 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data); PREFIX 312 drivers/input/serio/hp_sdc_mlc.c printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n"); PREFIX 326 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n"); PREFIX 331 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n"); PREFIX 333 drivers/input/serio/hp_sdc_mlc.c printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n" PREFIX 346 drivers/input/serio/hp_sdc_mlc.c printk(KERN_ERR PREFIX "Failed to release the raw HIL ISR hook.\n" PREFIX 350 drivers/input/serio/hp_sdc_mlc.c printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n" PREFIX 147 drivers/media/i2c/saa6588.c dprintk(PREFIX "Read: buffer empty.\n"); PREFIX 152 drivers/media/i2c/saa6588.c dprintk(PREFIX "Read: "); PREFIX 225 drivers/media/i2c/saa6588.c dprintk(PREFIX "New block: "); PREFIX 260 drivers/media/i2c/saa6588.c dprintk(PREFIX "read error!\n"); PREFIX 373 drivers/media/i2c/saa6588.c dprintk(PREFIX "writing: 0w=0x%02x 1w=0x%02x 2w=0x%02x\n", PREFIX 378 drivers/media/i2c/saa6588.c printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc); PREFIX 124 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX PREFIX 132 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX PREFIX 196 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "'%s': unable to allocate memory for " PREFIX 220 drivers/mtd/rfd_ftl.c printk(KERN_NOTICE PREFIX "no RFD magic found in '%s'\n", PREFIX 227 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "'%s': no empty erase unit found\n", PREFIX 261 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "error reading '%s' at " PREFIX 288 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "erase of region %llx,%llx on '%s' " PREFIX 309 drivers/mtd/rfd_ftl.c pr_err(PREFIX "'%s': unable to write RFD header at 0x%lx\n", PREFIX 346 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error reading '%s' at " PREFIX 386 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "'%s': Unable to " PREFIX 536 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "'%s': unable to read header at " PREFIX 568 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error writing '%s' at " PREFIX 640 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", PREFIX 659 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", PREFIX 739 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "please provide block_size"); PREFIX 752 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "'%s': errors found, " PREFIX 757 drivers/mtd/rfd_ftl.c printk(KERN_INFO PREFIX "name: '%s' type: %d flags %x\n", PREFIX 67 drivers/power/reset/reboot-mode.c size_t len = strlen(PREFIX); PREFIX 73 drivers/power/reset/reboot-mode.c if (strncmp(prop->name, PREFIX, len)) PREFIX 174 drivers/usb/gadget/legacy/ether.c [USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC, PREFIX 480 drivers/usb/gadget/legacy/ether.c MODULE_DESCRIPTION(PREFIX DRIVER_DESC); PREFIX 45 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Evaluating processor object\n"); PREFIX 55 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Evaluating processor _UID\n"); PREFIX 67 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Hotadd CPU (acpi_id = %d) failed.\n", PREFIX 94 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Error when enabling Xen processor\n"); PREFIX 133 drivers/xen/xen-acpi-cpuhotplug.c pr_info(PREFIX "Processor does not support hot plug\n"); PREFIX 135 drivers/xen/xen-acpi-cpuhotplug.c pr_info(PREFIX "Processor Device is not present"); PREFIX 182 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Failed to get apic_id for acpi_id %d\n", PREFIX 189 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Failed to get _PXM for acpi_id %d\n", PREFIX 201 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Failed to hotadd CPU for acpi_id %d\n", PREFIX 227 drivers/xen/xen-acpi-cpuhotplug.c pr_debug(PREFIX "Xen does not support CPU hotremove\n"); PREFIX 259 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Unable to add the device\n"); PREFIX 265 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Missing device object\n"); PREFIX 276 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Device don't exist, dropping EJECT\n"); PREFIX 281 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Driver data is NULL, dropping EJECT\n"); PREFIX 50 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Xen Hotplug Memory Add failed on " PREFIX 170 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "ACPI namespace scan failed\n"); PREFIX 177 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "Missing device object\n"); PREFIX 185 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "driver data not found\n"); PREFIX 217 drivers/xen/xen-acpi-memhotplug.c pr_debug(PREFIX "Xen does not support memory hotremove\n"); PREFIX 239 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Cannot find driver data\n"); PREFIX 253 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Device doesn't exist\n"); PREFIX 259 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Driver Data is NULL\n"); PREFIX 436 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "walk_namespace failed\n"); PREFIX 458 drivers/xen/xen-acpi-memhotplug.c pr_warn(PREFIX "walk_namespace failed\n"); PREFIX 42 lib/zstd/error_private.h #define ERROR(name) ((size_t)-PREFIX(name)) PREFIX 173 sound/soc/generic/audio-graph-card.c asoc_simple_parse_convert(dev, node, PREFIX, adata); PREFIX 299 sound/soc/generic/audio-graph-card.c PREFIX "prefix"); PREFIX 87 sound/soc/generic/simple-card.c asoc_simple_parse_convert(dev, top, PREFIX, adata); PREFIX 88 sound/soc/generic/simple-card.c asoc_simple_parse_convert(dev, node, PREFIX, adata); PREFIX 104 sound/soc/generic/simple-card.c snprintf(prop, sizeof(prop), "%smclk-fs", PREFIX); PREFIX 147 sound/soc/generic/simple-card.c prefix = PREFIX; PREFIX 213 sound/soc/generic/simple-card.c PREFIX "prefix"); PREFIX 280 sound/soc/generic/simple-card.c prefix = PREFIX; PREFIX 364 sound/soc/generic/simple-card.c node = of_get_child_by_name(top, PREFIX "dai-link"); PREFIX 379 sound/soc/generic/simple-card.c PREFIX "codec" : "codec"); PREFIX 429 sound/soc/generic/simple-card.c if (!of_find_property(node, PREFIX "aux-devs", &len)) PREFIX 442 sound/soc/generic/simple-card.c aux_node = of_parse_phandle(node, PREFIX "aux-devs", i); PREFIX 463 sound/soc/generic/simple-card.c ret = asoc_simple_parse_widgets(card, PREFIX); PREFIX 467 sound/soc/generic/simple-card.c ret = asoc_simple_parse_routing(card, PREFIX); PREFIX 471 sound/soc/generic/simple-card.c ret = asoc_simple_parse_pin_switches(card, PREFIX); PREFIX 497 sound/soc/generic/simple-card.c ret = asoc_simple_parse_card_name(card, PREFIX); PREFIX 603 sound/soc/generic/simple-card.c ret = asoc_simple_init_hp(card, &priv->hp_jack, PREFIX); PREFIX 607 sound/soc/generic/simple-card.c ret = asoc_simple_init_mic(card, &priv->mic_jack, PREFIX); PREFIX 314 sound/soc/meson/axg-card.c daifmt = snd_soc_of_parse_daifmt(node, PREFIX, PREFIX 540 sound/soc/meson/axg-card.c return of_device_is_compatible(np, PREFIX "axg-toddr"); PREFIX 545 sound/soc/meson/axg-card.c return of_device_is_compatible(np, PREFIX "axg-frddr"); PREFIX 550 sound/soc/meson/axg-card.c return of_device_is_compatible(np, PREFIX "axg-tdm-iface"); PREFIX 555 sound/soc/meson/axg-card.c return of_device_is_compatible(np, PREFIX "g12a-tohdmitx"); PREFIX 43 sound/soc/ti/omap3pandora.c pr_err(PREFIX "can't set codec system clock\n"); PREFIX 52 sound/soc/ti/omap3pandora.c pr_err(PREFIX "can't set cpu system clock\n"); PREFIX 58 sound/soc/ti/omap3pandora.c pr_err(PREFIX "can't set SRG clock divider\n"); PREFIX 234 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to get DAC power GPIO\n"); PREFIX 240 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to set DAC power GPIO direction\n"); PREFIX 246 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to get amp power GPIO\n"); PREFIX 252 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to set amp power GPIO direction\n"); PREFIX 258 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Platform device allocation failed\n"); PREFIX 267 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Unable to add platform device\n"); PREFIX 273 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n", PREFIX 106 sound/usb/bcd2000/bcd2000.c bcd2000_dump_buffer(PREFIX "received from device: ", buf, buf_len); PREFIX 119 sound/usb/bcd2000/bcd2000.c bcd2000_dump_buffer(PREFIX "sending to userspace: ", PREFIX 159 sound/usb/bcd2000/bcd2000.c bcd2000_dump_buffer(PREFIX "sending to device: ", PREFIX 165 sound/usb/bcd2000/bcd2000.c dev_err(&bcd2k->dev->dev, PREFIX PREFIX 213 sound/usb/bcd2000/bcd2000.c PREFIX "output urb->status: %d\n", urb->status); PREFIX 229 sound/usb/bcd2000/bcd2000.c PREFIX "input urb->status: %i\n", urb->status); PREFIX 241 sound/usb/bcd2000/bcd2000.c dev_err(&bcd2k->dev->dev, PREFIX PREFIX 273 sound/usb/bcd2000/bcd2000.c dev_err(&bcd2k->dev->dev, PREFIX PREFIX 282 sound/usb/bcd2000/bcd2000.c dev_err(&bcd2k->dev->dev, PREFIX PREFIX 322 sound/usb/bcd2000/bcd2000.c dev_err(&bcd2k->dev->dev, PREFIX "usb_alloc_urb failed\n"); PREFIX 419 sound/usb/bcd2000/bcd2000.c dev_info(&bcd2k->dev->dev, PREFIX "error during probing"); PREFIX 446 tools/perf/perf.c exec_cmd_init("perf", PREFIX, PERF_EXEC_PATH, EXEC_PATH_ENVIRONMENT);