PCI_VPD_ADDR 623 drivers/net/ethernet/chelsio/cxgb3/t3_hw.c pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr); PCI_VPD_ADDR 626 drivers/net/ethernet/chelsio/cxgb3/t3_hw.c pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val); PCI_VPD_ADDR 658 drivers/net/ethernet/chelsio/cxgb3/t3_hw.c pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR, PCI_VPD_ADDR 662 drivers/net/ethernet/chelsio/cxgb3/t3_hw.c pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val); PCI_VPD_ADDR 799 drivers/net/ethernet/marvell/skge.c pci_write_config_word(pdev, cap + PCI_VPD_ADDR, offset); PCI_VPD_ADDR 802 drivers/net/ethernet/marvell/skge.c pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset); PCI_VPD_ADDR 812 drivers/net/ethernet/marvell/skge.c pci_write_config_word(pdev, cap + PCI_VPD_ADDR, PCI_VPD_ADDR 816 drivers/net/ethernet/marvell/skge.c pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset); PCI_VPD_ADDR 4267 drivers/net/ethernet/marvell/sky2.c while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) { PCI_VPD_ADDR 4287 drivers/net/ethernet/marvell/sky2.c sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset); PCI_VPD_ADDR 4313 drivers/net/ethernet/marvell/sky2.c sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F); PCI_VPD_ADDR 150 drivers/pci/vpd.c ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR, PCI_VPD_ADDR 213 drivers/pci/vpd.c ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, PCI_VPD_ADDR 282 drivers/pci/vpd.c ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, PCI_VPD_ADDR 221 drivers/scsi/csiostor/csio_hw.c pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr); PCI_VPD_ADDR 225 drivers/scsi/csiostor/csio_hw.c pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val); PCI_VPD_ADDR 724 drivers/vfio/pci/vfio_pci_config.c __le16 *paddr = (__le16 *)(vdev->vconfig + pos - offset + PCI_VPD_ADDR); PCI_VPD_ADDR 735 drivers/vfio/pci/vfio_pci_config.c if (count < 0 || offset > PCI_VPD_ADDR + 1 || PCI_VPD_ADDR 736 drivers/vfio/pci/vfio_pci_config.c offset + count <= PCI_VPD_ADDR + 1) PCI_VPD_ADDR 781 drivers/vfio/pci/vfio_pci_config.c p_setw(perm, PCI_VPD_ADDR, (u16)ALL_VIRT, (u16)ALL_WRITE); PCI_VPD_ADDR 80 drivers/xen/xen-pciback/conf_space_capability.c .offset = PCI_VPD_ADDR,