FW_BUG 340 arch/arm/mm/cache-feroceon-l2.c pr_err(FW_BUG FW_BUG 155 arch/arm64/kernel/acpi.c pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n", FW_BUG 127 arch/arm64/kernel/efi.c pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f); FW_BUG 137 arch/arm64/kernel/pci.c dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n", FW_BUG 809 arch/x86/events/amd/ibs.c pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", FW_BUG 815 arch/x86/events/amd/ibs.c pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", FW_BUG 262 arch/x86/events/core.c pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", FW_BUG 119 arch/x86/kernel/acpi/cstate.c pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", FW_BUG 439 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " FW_BUG 447 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " FW_BUG 637 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "TSC_DEADLINE disabled due to Errata; " FW_BUG 1363 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "Local APIC %d not detected, force emulation\n", FW_BUG 523 arch/x86/kernel/cpu/amd.c pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); FW_BUG 1455 arch/x86/kernel/cpu/common.c pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x APIC: %x\n", FW_BUG 228 arch/x86/kernel/cpu/hygon.c pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); FW_BUG 352 arch/x86/kernel/cpu/mce/amd.c pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt " FW_BUG 367 arch/x86/kernel/cpu/mce/amd.c pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d " FW_BUG 462 arch/x86/kernel/cpu/mce/amd.c pr_err(FW_BUG "Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.\n"); FW_BUG 1924 arch/x86/kernel/cpu/mce/core.c pr_warn(FW_BUG FW_BUG 74 arch/x86/kernel/tsc_sync.c pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n", FW_BUG 101 arch/x86/kernel/tsc_sync.c pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n", FW_BUG 182 arch/x86/kernel/tsc_sync.c printk_once(FW_BUG "TSC ADJUST differs within socket(s), fixing all errors\n"); FW_BUG 254 arch/x86/pci/acpi.c dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n", FW_BUG 758 arch/x86/pci/mmconfig-shared.c dev_warn(dev, FW_BUG "MMCONFIG %pR isn't reserved\n", FW_BUG 265 arch/x86/platform/efi/efi.c pr_warn_once(FW_BUG "Invalid EFI memory map entries:\n"); FW_BUG 736 arch/x86/platform/efi/quirks.c WARN(1, FW_BUG "Page fault caused by firmware at PA: 0x%lx\n", FW_BUG 205 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG "L1 Directory is invalid at physical %llx\n", FW_BUG 241 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG EMCA_BUG, FW_BUG 259 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG EMCA_BUG, FW_BUG 270 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG EMCA_BUG, FW_BUG 304 drivers/acpi/acpi_extlog.c pr_warn(FW_BUG "Extended error log disabled because of problems parsing f/w tables\n"); FW_BUG 1022 drivers/acpi/acpi_video.c printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n"); FW_BUG 1082 drivers/acpi/acpi_video.c printk(KERN_WARNING FW_BUG FW_BUG 2029 drivers/acpi/acpi_video.c printk(KERN_WARNING FW_BUG FW_BUG 582 drivers/acpi/apei/apei-base.c pr_warning(FW_BUG APEI_PFX FW_BUG 590 drivers/acpi/apei/apei-base.c pr_warning(FW_BUG APEI_PFX FW_BUG 607 drivers/acpi/apei/apei-base.c pr_warning(FW_BUG APEI_PFX FW_BUG 616 drivers/acpi/apei/apei-base.c pr_warning(FW_BUG APEI_PFX FW_BUG 46 drivers/acpi/apei/bert.c pr_err(FW_BUG "Truncated status block (length: %u).\n", FW_BUG 56 drivers/acpi/apei/bert.c pr_err(FW_BUG "Invalid error record.\n"); FW_BUG 121 drivers/acpi/apei/bert.c pr_err(FW_BUG "table invalid.\n"); FW_BUG 315 drivers/acpi/apei/einj.c pr_warning(FW_BUG "Invalid trigger error action table.\n"); FW_BUG 694 drivers/acpi/apei/einj.c pr_warn(FW_BUG "Invalid EINJ table.\n"); FW_BUG 1124 drivers/acpi/apei/erst.c pr_err(FW_BUG "ERST table is invalid.\n"); FW_BUG 1170 drivers/acpi/apei/ghes.c pr_warning(FW_BUG GHES_PFX "Invalid error block length: %u for generic hardware error source: %d\n", FW_BUG 103 drivers/acpi/apei/hest.c pr_warning(FW_BUG HEST_PFX FW_BUG 181 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "invalid timer data.\n"); FW_BUG 199 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "GT block present, but frame count is zero.\n"); FW_BUG 204 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n", FW_BUG 350 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "failed to get the Watchdog base address.\n"); FW_BUG 312 drivers/acpi/arm64/iort.c pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n", FW_BUG 340 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", FW_BUG 384 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", FW_BUG 422 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", FW_BUG 666 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n", FW_BUG 562 drivers/acpi/battery.c pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n"); FW_BUG 604 drivers/acpi/battery.c pr_warn_once(FW_BUG "battery: (dis)charge rate invalid.\n"); FW_BUG 76 drivers/acpi/osi.c pr_notice_once(FW_BUG FW_BUG 558 drivers/acpi/pci_root.c FW_BUG "no secondary bus range in _CRS\n"); FW_BUG 362 drivers/acpi/processor_perflib.c printk(KERN_ERR FW_BUG PREFIX FW_BUG 380 drivers/acpi/processor_perflib.c printk(KERN_ERR FW_BUG PREFIX FW_BUG 431 drivers/acpi/processor_perflib.c printk(KERN_WARNING FW_BUG "BIOS needs update for CPU " FW_BUG 287 drivers/acpi/thermal.c pr_warn(FW_BUG "Invalid critical threshold (%llu)\n", FW_BUG 491 drivers/acpi/thermal.c pr_warn(FW_BUG "No valid trip found\n"); FW_BUG 343 drivers/char/tpm/tpm_crb.c FW_BUG "tpm_crb_smc_start() returns res.a0 = 0x%lx\n", FW_BUG 353 drivers/char/tpm/tpm_crb.c dev_err(dev, FW_BUG "tpm_crb: incorrect start method\n"); FW_BUG 484 drivers/char/tpm/tpm_crb.c FW_BUG "ACPI region does not cover the entire command/response buffer. %pr vs %llx %llx\n", FW_BUG 512 drivers/char/tpm/tpm_crb.c dev_err(dev, FW_BUG "TPM2 ACPI table does not define a memory resource\n"); FW_BUG 530 drivers/char/tpm/tpm_crb.c dev_warn(dev, FW_BUG "Bad ACPI memory layout"); FW_BUG 582 drivers/char/tpm/tpm_crb.c dev_err(dev, FW_BUG "overlapping command and response buffer sizes are not identical"); FW_BUG 616 drivers/char/tpm/tpm_crb.c dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n"); FW_BUG 632 drivers/char/tpm/tpm_crb.c FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n", FW_BUG 115 drivers/char/tpm/tpm_tis.c dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n"); FW_BUG 990 drivers/char/tpm/tpm_tis_core.c dev_err(&chip->dev, FW_BUG FW_BUG 1433 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "Missing frame-number.\n"); FW_BUG 1438 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "Wrong frame-number, only 0-%u are permitted.\n", FW_BUG 1446 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "Duplicated frame-number.\n"); FW_BUG 1505 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "CNTFRQ mismatch: frame @ %pa: (0x%08lx), CPU: (0x%08lx)\n", FW_BUG 1598 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "frequency not available.\n"); FW_BUG 500 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "vid %d invalid : 0x%x\n", j, FW_BUG 506 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j); FW_BUG 511 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j); FW_BUG 515 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j); FW_BUG 520 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "two low fids - %d : 0x%x\n", j, FW_BUG 528 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "lastfid invalid\n"); FW_BUG 532 drivers/cpufreq/powernow-k8.c pr_info(FW_BUG "first fid not from lo freq table\n"); FW_BUG 643 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "PSB table is not v1.4\n"); FW_BUG 649 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "unknown flags\n"); FW_BUG 678 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "numpst must be 1\n"); FW_BUG 704 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "No PSB or ACPI _PSS objects\n"); FW_BUG 1020 drivers/cpufreq/powernow-k8.c FW_BUG "No compatible ACPI _PSS objects found.\n" \ FW_BUG 1021 drivers/cpufreq/powernow-k8.c FW_BUG "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" \ FW_BUG 1022 drivers/cpufreq/powernow-k8.c FW_BUG "If that doesn't help, try upgrading your BIOS.\n" FW_BUG 1051 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n"); FW_BUG 350 drivers/edac/pnd2_edac.c pr_info(FW_BUG "MOT mask cannot be zero\n"); FW_BUG 354 drivers/edac/pnd2_edac.c pr_info(FW_BUG "MOT mask not power of two\n"); FW_BUG 358 drivers/edac/pnd2_edac.c pr_info(FW_BUG "MOT region base/mask alignment error\n"); FW_BUG 397 drivers/firmware/dmi_scan.c pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n"); FW_BUG 115 drivers/firmware/efi/runtime-wrappers.c pr_err_ratelimited(FW_BUG "IRQ flags corrupted (0x%08lx=>0x%08lx) by EFI %s\n", FW_BUG 67 drivers/firmware/efi/tpm.c pr_warn(FW_BUG "TPM Final Events table missing or invalid\n"); FW_BUG 93 drivers/firmware/efi/tpm.c pr_err(FW_BUG "Failed to parse event in TPM Final Events Log\n"); FW_BUG 596 drivers/gpio/gpiolib-acpi.c dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n"); FW_BUG 362 drivers/i2c/i2c-core-acpi.c dev_warn(dev, FW_BUG "DSDT uses known not-working I2C bus speed %d, forcing it to %d\n", FW_BUG 547 drivers/iommu/amd_iommu_init.c pr_err(FW_BUG "IVRS invalid checksum\n"); FW_BUG 1339 drivers/iommu/amd_iommu_init.c pr_err(FW_BUG "Invalid IVHD device type %#x\n", FW_BUG 1348 drivers/iommu/amd_iommu_init.c pr_err(FW_BUG "Invalid HID.\n"); FW_BUG 1357 drivers/iommu/amd_iommu_init.c pr_warn(FW_BUG "Invalid UID length.\n"); FW_BUG 2449 drivers/iommu/amd_iommu_init.c const char *fw_bug = FW_BUG; FW_BUG 209 drivers/iommu/dmar.c pr_info(FW_BUG "RMRR entry for device %02x:%02x.%x is broken - applying workaround\n", FW_BUG 452 drivers/iommu/dmar.c pr_warn(FW_BUG FW_BUG 484 drivers/iommu/dmar.c pr_warn(FW_BUG FW_BUG 566 drivers/iommu/dmar.c pr_debug(FW_BUG "Invalid 0-length structure\n"); FW_BUG 570 drivers/iommu/dmar.c pr_warn(FW_BUG "Record passes table end\n"); FW_BUG 648 drivers/iommu/dmar.c pr_warn(FW_BUG "No DRHD structure found in DMAR table\n"); FW_BUG 840 drivers/iommu/dmar.c pr_warn_once(FW_BUG FW_BUG 2030 drivers/iommu/dmar.c pr_warn(FW_BUG "No DRHD structures in buffer returned by _DSM method\n"); FW_BUG 4122 drivers/iommu/intel-iommu.c pr_warn_once(FW_BUG "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n"); FW_BUG 991 drivers/iommu/intel_irq_remapping.c pr_err(FW_BUG "ioapic %d has no mapping iommu, " FW_BUG 339 drivers/pci/pci-sysfs.c pci_alert(pdev, FW_BUG "Overriding NUMA node to %d. Contact your vendor for updates.", FW_BUG 256 drivers/pci/probe.c pci_info(dev, FW_BUG "reg 0x%x: invalid BAR (can't size)\n", FW_BUG 286 drivers/pci/quirks.c pci_info(dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); FW_BUG 531 drivers/pci/quirks.c pci_info(dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", FW_BUG 5529 drivers/pci/quirks.c pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n"); FW_BUG 557 drivers/pci/vpd.c pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n"); FW_BUG 793 drivers/pinctrl/intel/pinctrl-baytrail.c dev_warn(&vg->pdev->dev, FW_BUG FW_BUG 847 drivers/pinctrl/mvebu/pinctrl-dove.c dev_warn(&pdev->dev, FW_BUG "Missing pinctrl regs in DTB. Please update your firmware.\n"); FW_BUG 4548 drivers/platform/x86/thinkpad_acpi.c FW_BUG "disable bluetooth subdriver for Intel cards\n"); FW_BUG 323 drivers/pnp/quirks.c dev_info(&dev->dev, FW_BUG FW_BUG 407 drivers/pnp/quirks.c dev_info(&dev->dev, FW_BUG "PNP resource %pR covers only part of %s Intel MCH; extending to %pR\n", FW_BUG 417 drivers/watchdog/orion_wdt.c WARN(1, FW_BUG "falling back to hardcoded RSTOUT reg %pa\n", &rstout);