DEV_LABEL 154 drivers/atm/adummy.c printk(KERN_ERR DEV_LABEL ": kzalloc() failed\n"); DEV_LABEL 158 drivers/atm/adummy.c atm_dev = atm_dev_register(DEV_LABEL, NULL, &adummy_ops, -1, NULL); DEV_LABEL 160 drivers/atm/adummy.c printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n"); DEV_LABEL 172 drivers/atm/adummy.c printk(KERN_ERR DEV_LABEL ": adummy_start() failed\n"); DEV_LABEL 2206 drivers/atm/ambassador.c err = pci_request_region(pci_dev, 1, DEV_LABEL); DEV_LABEL 2230 drivers/atm/ambassador.c err = request_irq(irq, interrupt_handler, IRQF_SHARED, DEV_LABEL, dev); DEV_LABEL 2236 drivers/atm/ambassador.c dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1, DEV_LABEL 31 drivers/atm/ambassador.h printk(severity DEV_LABEL ": " format "\n" , ## args) DEV_LABEL 56 drivers/atm/ambassador.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) DEV_LABEL 62 drivers/atm/ambassador.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) DEV_LABEL 369 drivers/atm/atmtcp.c dev = atm_dev_register(DEV_LABEL,NULL,&atmtcp_v_dev_ops,itf,NULL); DEV_LABEL 326 drivers/atm/eni.c printk(KERN_ALERT DEV_LABEL "(itf %d): driver error - RX ident " DEV_LABEL 365 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %d has " DEV_LABEL 453 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "!j or j too big!!!\n"); DEV_LABEL 465 drivers/atm/eni.c printk(KERN_WARNING DEV_LABEL "(itf %d): RX DMA full\n", DEV_LABEL 527 drivers/atm/eni.c DPRINTK(DEV_LABEL "(itf %d): trashing empty cell\n", DEV_LABEL 567 drivers/atm/eni.c DPRINTK(DEV_LABEL "(itf %d): trashing empty cell\n", DEV_LABEL 575 drivers/atm/eni.c printk(KERN_WARNING DEV_LABEL "(itf %d): " DEV_LABEL 598 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): bad AAL5 PDU " DEV_LABEL 695 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %ld not " DEV_LABEL 741 drivers/atm/eni.c DPRINTK(DEV_LABEL "(itf %d): RX but not " DEV_LABEL 830 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): BUG - VCI %d already " DEV_LABEL 912 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): couldn't get free page\n", DEV_LABEL 1066 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): VCI %d has mis-aligned " DEV_LABEL 1094 drivers/atm/eni.c DPRINTK(DEV_LABEL "(itf %d): TX full (size %d)\n", DEV_LABEL 1107 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): needs %d DMA entries " DEV_LABEL 1113 drivers/atm/eni.c printk(KERN_WARNING DEV_LABEL "(itf %d): TX DMA full\n", DEV_LABEL 1478 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - DMA " DEV_LABEL 1481 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - ident " DEV_LABEL 1484 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - DMA " DEV_LABEL 1502 drivers/atm/eni.c DPRINTK(DEV_LABEL ": int 0x%lx\n",(unsigned long) reason); DEV_LABEL 1679 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): error reading ESI " DEV_LABEL 1722 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory " DEV_LABEL 1726 drivers/atm/eni.c printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,", DEV_LABEL 1730 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page " DEV_LABEL 1741 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL DEV_LABEL 1771 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): ERROR - wrong id 0x%x\n", DEV_LABEL 1782 drivers/atm/eni.c printk(KERN_NOTICE DEV_LABEL "(itf %d): %s,%s\n",dev->number, DEV_LABEL 1815 drivers/atm/eni.c if (request_irq(eni_dev->irq,&eni_int,IRQF_SHARED,DEV_LABEL,dev)) { DEV_LABEL 1816 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", DEV_LABEL 1825 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory+" DEV_LABEL 1831 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't set endian swap " DEV_LABEL 1854 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): couldn't get free page\n", DEV_LABEL 1927 drivers/atm/eni.c DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n",vcc->dev->number,vcc->vpi, DEV_LABEL 2003 drivers/atm/eni.c printk(KERN_WARNING "Please use /proc/atm/" DEV_LABEL ":%d " DEV_LABEL 2110 drivers/atm/eni.c return sprintf(page,DEV_LABEL "(itf %d) signal %s, %dkB, " DEV_LABEL 2261 drivers/atm/eni.c dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL); DEV_LABEL 2320 drivers/atm/eni.c .name = DEV_LABEL, DEV_LABEL 88 drivers/atm/he.c #define hprintk(fmt,args...) printk(KERN_ERR DEV_LABEL "%d: " fmt, he_dev->number , ##args) DEV_LABEL 91 drivers/atm/he.c #define HPRINTK(fmt,args...) printk(KERN_DEBUG DEV_LABEL "%d: " fmt, he_dev->number , ##args) DEV_LABEL 368 drivers/atm/he.c atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL); DEV_LABEL 963 drivers/atm/he.c he_irq_handler, IRQF_SHARED, DEV_LABEL, he_dev)) { DEV_LABEL 1830 drivers/atm/horizon.c printk (DEV_LABEL ": Horizon Ultra (at 155.52 MBps)"); DEV_LABEL 1832 drivers/atm/horizon.c printk (DEV_LABEL ": Horizon (at 25 MBps)"); DEV_LABEL 2665 drivers/atm/horizon.c if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { DEV_LABEL 2685 drivers/atm/horizon.c DEV_LABEL, /* name guess */ DEV_LABEL 2695 drivers/atm/horizon.c dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1, DEV_LABEL 35 drivers/atm/horizon.h printk(severity DEV_LABEL ": " format "\n" , ## args) DEV_LABEL 57 drivers/atm/horizon.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) DEV_LABEL 63 drivers/atm/horizon.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) DEV_LABEL 1109 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d) Receive queue empty\n", dev->number); DEV_LABEL 1412 drivers/atm/iphase.c printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %d already open\n", DEV_LABEL 1438 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "can't allocate DLEs\n"); DEV_LABEL 1624 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "itf %d couldn't get free page\n", DEV_LABEL 1925 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "can't allocate DLEs\n"); DEV_LABEL 1983 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL " couldn't get mem\n"); DEV_LABEL 1992 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL " couldn't get freepage\n"); DEV_LABEL 2005 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL " couldn't get mem\n"); DEV_LABEL 2333 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n", DEV_LABEL 2337 drivers/atm/iphase.c IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n", DEV_LABEL 2357 drivers/atm/iphase.c IF_INIT(printk (DEV_LABEL "map size: %i\n", iadev->pci_map_size);) DEV_LABEL 2372 drivers/atm/iphase.c printk(DEV_LABEL " (itf %d): can't set up page mapping\n", DEV_LABEL 2376 drivers/atm/iphase.c IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n", DEV_LABEL 2512 drivers/atm/iphase.c if (request_irq(iadev->irq, &ia_int, IRQF_SHARED, DEV_LABEL, dev)) { DEV_LABEL 2513 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", DEV_LABEL 2524 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory+" DEV_LABEL 2707 drivers/atm/iphase.c IF_EVENT(printk(DEV_LABEL "(itf %d): open %d.%d\n", DEV_LABEL 2947 drivers/atm/iphase.c IF_ERR(printk(DEV_LABEL "invalid desc for send: %d\n", desc);) DEV_LABEL 2958 drivers/atm/iphase.c IF_ERR(printk(DEV_LABEL "send desc:%d completion code %d error\n", DEV_LABEL 3197 drivers/atm/iphase.c dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL); DEV_LABEL 3203 drivers/atm/iphase.c IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);) DEV_LABEL 3275 drivers/atm/iphase.c .name = DEV_LABEL, DEV_LABEL 3290 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL ": no adapter found\n"); DEV_LABEL 165 drivers/atm/lanai.c printk(KERN_DEBUG DEV_LABEL ": " format, ##args) DEV_LABEL 169 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": " format, ##args); \ DEV_LABEL 181 drivers/atm/lanai.c printk(KERN_DEBUG DEV_LABEL ": " format, ##args) DEV_LABEL 559 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL DEV_LABEL 798 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on " DEV_LABEL 853 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n", DEV_LABEL 924 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n", DEV_LABEL 967 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad " DEV_LABEL 974 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum " DEV_LABEL 982 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL DEV_LABEL 994 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers " DEV_LABEL 1004 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers " DEV_LABEL 1011 drivers/atm/lanai.c printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM " DEV_LABEL 1072 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n", DEV_LABEL 1093 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name); DEV_LABEL 1102 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: " DEV_LABEL 1113 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: " DEV_LABEL 1258 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): butt register " DEV_LABEL 1349 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL DEV_LABEL 1356 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n"); DEV_LABEL 1401 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length " DEV_LABEL 1425 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n"); DEV_LABEL 1491 drivers/atm/lanai.c printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes " DEV_LABEL 1563 drivers/atm/lanai.c printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not " DEV_LABEL 1684 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream " DEV_LABEL 1826 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA " DEV_LABEL 1835 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n", DEV_LABEL 1843 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n", DEV_LABEL 1848 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " DEV_LABEL 1855 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " DEV_LABEL 1920 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a " DEV_LABEL 1937 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable " DEV_LABEL 1943 drivers/atm/lanai.c printk(KERN_WARNING DEV_LABEL DEV_LABEL 1953 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't write " DEV_LABEL 2139 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n"); DEV_LABEL 2198 drivers/atm/lanai.c DEV_LABEL, lanai)) != 0) { DEV_LABEL 2199 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n"); DEV_LABEL 2217 drivers/atm/lanai.c printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u " DEV_LABEL 2220 drivers/atm/lanai.c printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), " DEV_LABEL 2249 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n", DEV_LABEL 2325 drivers/atm/lanai.c DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number, DEV_LABEL 2446 drivers/atm/lanai.c return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, " DEV_LABEL 2560 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL DEV_LABEL 2565 drivers/atm/lanai.c atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL); DEV_LABEL 2567 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL DEV_LABEL 2594 drivers/atm/lanai.c .name = DEV_LABEL, DEV_LABEL 218 drivers/atm/zatm.c printk(KERN_WARNING DEV_LABEL "(Itf %d): got no new " DEV_LABEL 269 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL ": driver error in pool_index: " DEV_LABEL 429 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): RX indication " DEV_LABEL 441 drivers/atm/zatm.c printk(KERN_WARNING DEV_LABEL "(itf %d): " DEV_LABEL 451 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): size %d with %d " DEV_LABEL 457 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): size too big " DEV_LABEL 591 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel " DEV_LABEL 721 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): dequeue_tx but not " DEV_LABEL 774 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): TX indication " DEV_LABEL 831 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "shaper algorithm botched " DEV_LABEL 902 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel " DEV_LABEL 1055 drivers/atm/zatm.c printk(KERN_WARNING DEV_LABEL "(itf %d): RQU 0x%08lx\n", DEV_LABEL 1068 drivers/atm/zatm.c printk(KERN_ALERT DEV_LABEL "(itf %d): system parity " DEV_LABEL 1071 drivers/atm/zatm.c printk(KERN_ALERT DEV_LABEL "(itf %d): control memory " DEV_LABEL 1074 drivers/atm/zatm.c printk(KERN_ALERT DEV_LABEL "(itf %d): system bus " DEV_LABEL 1080 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): mailbox full " DEV_LABEL 1107 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL ": PCI write failed (0x%02x)\n", DEV_LABEL 1118 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL ": PCI read failed (0x%02x)\n", DEV_LABEL 1201 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n", DEV_LABEL 1207 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable IO (0x%02x)" DEV_LABEL 1212 drivers/atm/zatm.c printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,", DEV_LABEL 1255 drivers/atm/zatm.c printk(KERN_NOTICE DEV_LABEL "(itf %d): uPD98401 %d.%d at %d.%03d " DEV_LABEL 1275 drivers/atm/zatm.c error = request_irq(zatm_dev->irq, zatm_int, IRQF_SHARED, DEV_LABEL, dev); DEV_LABEL 1277 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", DEV_LABEL 1303 drivers/atm/zatm.c printk(KERN_INFO DEV_LABEL "(itf %d): %d shapers, %d pools, %d RX, " DEV_LABEL 1324 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): system " DEV_LABEL 1400 drivers/atm/zatm.c DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n",vcc->dev->number,vcc->vpi, DEV_LABEL 1602 drivers/atm/zatm.c printk(KERN_EMERG "%s: memory shortage\n", DEV_LABEL); DEV_LABEL 1606 drivers/atm/zatm.c dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL); DEV_LABEL 1614 drivers/atm/zatm.c ret = pci_request_regions(pci_dev, DEV_LABEL); DEV_LABEL 1657 drivers/atm/zatm.c .name = DEV_LABEL,