DEB2               57 drivers/i2c/algos/i2c-algo-pca.c 	DEB2("=== START\n");
DEB2               72 drivers/i2c/algos/i2c-algo-pca.c 	DEB2("=== REPEATED START\n");
DEB2               91 drivers/i2c/algos/i2c-algo-pca.c 	DEB2("=== STOP\n");
DEB2              108 drivers/i2c/algos/i2c-algo-pca.c 	DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
DEB2              128 drivers/i2c/algos/i2c-algo-pca.c 	DEB2("=== WRITE %#04x\n", b);
DEB2              146 drivers/i2c/algos/i2c-algo-pca.c 	DEB2("=== READ %#04x %s\n", *b, ack ? "ACK" : "NACK");
DEB2              248 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("NOT ACK received after SLA+W\n");
DEB2              273 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("NOT ACK received after SLA+R\n");
DEB2              279 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("NOT ACK received after data byte\n");
DEB2              284 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("Arbitration lost\n");
DEB2              306 drivers/i2c/algos/i2c-algo-pca.c 				DEB2("NOT ACK sent after data byte received. "
DEB2              314 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("BUS ERROR - SDA Stuck low\n");
DEB2              318 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("BUS ERROR - SCL Stuck low\n");
DEB2              322 drivers/i2c/algos/i2c-algo-pca.c 			DEB2("BUS ERROR - Illegal START or STOP\n");
DEB2               67 drivers/i2c/algos/i2c-algo-pcf.c 	DEB2(printk(KERN_INFO
DEB2               90 drivers/i2c/algos/i2c-algo-pcf.c 	DEB2(printk(KERN_INFO
DEB2              163 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
DEB2              171 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp));
DEB2              179 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S2 (0x%02x).\n", temp));
DEB2              187 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp));
DEB2              196 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
DEB2              212 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(dev_dbg(&i2c_adap->dev, "i2c_write: writing %2.2X\n",
DEB2              309 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
DEB2              318 drivers/i2c/algos/i2c-algo-pcf.c 		DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n",
DEB2              337 drivers/i2c/algos/i2c-algo-pcf.c 			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
DEB2              346 drivers/i2c/algos/i2c-algo-pcf.c 			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
DEB2              359 drivers/i2c/algos/i2c-algo-pcf.c 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
DEB2              362 drivers/i2c/algos/i2c-algo-pcf.c 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret));
DEB2              369 drivers/i2c/algos/i2c-algo-pcf.c 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
DEB2              372 drivers/i2c/algos/i2c-algo-pcf.c 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: wrote %d bytes.\n",ret));
DEB2              403 drivers/i2c/algos/i2c-algo-pcf.c 	DEB2(dev_dbg(&adap->dev, "hw routines registered.\n"));