DBG_ERR          1715 drivers/atm/ambassador.c 			PRINTD (DBG_LOAD|DBG_ERR,
DBG_ERR          1755 drivers/atm/ambassador.c       PRINTD (DBG_LOAD|DBG_ERR, "command %d timed out", cmd);
DBG_ERR          1768 drivers/atm/ambassador.c 	PRINTD (DBG_LOAD|DBG_ERR, "start command did not clear doorbell, res=%08x",
DBG_ERR          1878 drivers/atm/ambassador.c 	PRINTD (DBG_LOAD|DBG_ERR, "reset timed out");
DBG_ERR          2011 drivers/atm/ambassador.c       PRINTD (DBG_INIT|DBG_ERR, "adapter init timed out");
DBG_ERR          2239 drivers/atm/ambassador.c 		PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
DBG_ERR           593 drivers/atm/horizon.c 		PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!");
DBG_ERR           723 drivers/atm/horizon.c     PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open");
DBG_ERR           734 drivers/atm/horizon.c       PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE");
DBG_ERR           935 drivers/atm/horizon.c 	PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion");
DBG_ERR          1054 drivers/atm/horizon.c     PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion");
DBG_ERR          1101 drivers/atm/horizon.c 	PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion");
DBG_ERR          1210 drivers/atm/horizon.c     PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion");
DBG_ERR          1274 drivers/atm/horizon.c     PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!");
DBG_ERR          1437 drivers/atm/horizon.c       PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel");
DBG_ERR          1507 drivers/atm/horizon.c       PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!");
DBG_ERR          1581 drivers/atm/horizon.c     PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel");
DBG_ERR          1592 drivers/atm/horizon.c       PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)");
DBG_ERR          1640 drivers/atm/horizon.c       PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d",
DBG_ERR          1665 drivers/atm/horizon.c 	PRINTD (DBG_TX|DBG_ERR, "failed to get channel");
DBG_ERR          2040 drivers/atm/horizon.c 	PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu");
DBG_ERR          2454 drivers/atm/horizon.c       PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX");
DBG_ERR          2673 drivers/atm/horizon.c 		PRINTD(DBG_ERR, "out of memory");
DBG_ERR          2698 drivers/atm/horizon.c 		PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
DBG_ERR           589 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_ERR, "ep_enable: Invalid argument");
DBG_ERR           596 drivers/usb/gadget/udc/atmel_usba_udc.c 	DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n",
DBG_ERR           610 drivers/usb/gadget/udc/atmel_usba_udc.c 			DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
DBG_ERR           683 drivers/usb/gadget/udc/atmel_usba_udc.c 			DBG(DBG_ERR, "ep_disable: %s not enabled\n",
DBG_ERR           745 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
DBG_ERR           933 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
DBG_ERR           938 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
DBG_ERR           228 drivers/usb/gadget/udc/atmel_usba_udc.h #define DEBUG_LEVEL	(DBG_ERR)