DBG_BUS           951 drivers/atm/horizon.c 	PRINTD (DBG_RX|DBG_BUS, "(pio)");
DBG_BUS           955 drivers/atm/horizon.c 	PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)");
DBG_BUS           958 drivers/atm/horizon.c 	PRINTD (DBG_RX|DBG_BUS, "(continuing multi)");
DBG_BUS           980 drivers/atm/horizon.c 	  PRINTD (DBG_RX|DBG_BUS, "(pio)");
DBG_BUS           984 drivers/atm/horizon.c 	  PRINTD (DBG_RX|DBG_BUS, "(full region)");
DBG_BUS           987 drivers/atm/horizon.c 	  PRINTD (DBG_RX|DBG_BUS, "(start multi region)");
DBG_BUS          1113 drivers/atm/horizon.c 	PRINTD (DBG_TX|DBG_BUS, "(pio)");
DBG_BUS          1117 drivers/atm/horizon.c 	PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)");
DBG_BUS          1124 drivers/atm/horizon.c 	PRINTD (DBG_TX|DBG_BUS, "(continuing multi)");
DBG_BUS          1141 drivers/atm/horizon.c 	  PRINTD (DBG_TX|DBG_BUS, "(pio)");
DBG_BUS          1145 drivers/atm/horizon.c 	  PRINTD (DBG_TX|DBG_BUS, "(full region)");
DBG_BUS          1148 drivers/atm/horizon.c 	  PRINTD (DBG_TX|DBG_BUS, "(start multi region)");
DBG_BUS          1378 drivers/atm/horizon.c       PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted");
DBG_BUS          1383 drivers/atm/horizon.c       PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted");
DBG_BUS          1592 drivers/atm/horizon.c       PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)");
DBG_BUS          1695 drivers/atm/horizon.c       PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)",
DBG_BUS          1706 drivers/atm/horizon.c       PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)",
DBG_BUS          1188 drivers/usb/gadget/udc/atmel_usba_udc.c 	DBG(DBG_BUS, "setting address %u...\n", addr);
DBG_BUS          1605 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
DBG_BUS          1628 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
DBG_BUS          1664 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
DBG_BUS          1733 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "Suspend detected\n");
DBG_BUS          1746 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "Wake Up CPU detected\n");
DBG_BUS          1755 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "Resume detected\n");
DBG_BUS          1811 drivers/usb/gadget/udc/atmel_usba_udc.c 		DBG(DBG_BUS, "%s bus reset detected\n",