printk 352 arch/alpha/include/asm/pgtable.h printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) printk 354 arch/alpha/include/asm/pgtable.h printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) printk 356 arch/alpha/include/asm/pgtable.h printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 89 arch/alpha/kernel/console.c printk("Console graphics on hose %d\n", h); printk 43 arch/alpha/kernel/core_apecs.c # define DBGC(args) printk args printk 187 arch/alpha/kernel/core_apecs.c printk("apecs.c:conf_read: got stat0=%x\n", stat0); printk 256 arch/alpha/kernel/core_apecs.c printk("apecs.c:conf_write: got stat0=%x\n", stat0); printk 41 arch/alpha/kernel/core_cia.c # define DBGC(args) printk args printk 406 arch/alpha/kernel/core_cia.c printk("pci: failed tb register update test " printk 412 arch/alpha/kernel/core_cia.c printk("pci: failed tb register update test " printk 418 arch/alpha/kernel/core_cia.c printk("pci: failed tb register update test " printk 422 arch/alpha/kernel/core_cia.c printk("pci: passed tb register update test\n"); printk 436 arch/alpha/kernel/core_cia.c printk("pci: failed sg loopback i/o read test (mcheck)\n"); printk 440 arch/alpha/kernel/core_cia.c printk("pci: failed sg loopback i/o read test " printk 444 arch/alpha/kernel/core_cia.c printk("pci: passed sg loopback i/o read test\n"); printk 453 arch/alpha/kernel/core_cia.c printk("pci: failed tbia test; workaround available\n"); printk 455 arch/alpha/kernel/core_cia.c printk("pci: passed tbia test\n"); printk 473 arch/alpha/kernel/core_cia.c printk("pci: failed pte write cache snoop test (mcheck)\n"); printk 477 arch/alpha/kernel/core_cia.c printk("pci: failed pte write cache snoop test " printk 481 arch/alpha/kernel/core_cia.c printk("pci: passed pte write cache snoop test\n"); printk 497 arch/alpha/kernel/core_cia.c printk("pci: failed valid tag invalid pte reload test " printk 503 arch/alpha/kernel/core_cia.c printk("pci: failed valid tag invalid pte reload test " printk 507 arch/alpha/kernel/core_cia.c printk("pci: passed valid tag invalid pte reload test\n"); printk 520 arch/alpha/kernel/core_cia.c printk("pci: %s pci machine check test\n", printk 537 arch/alpha/kernel/core_cia.c printk("pci: tbia workaround enabled\n"); printk 554 arch/alpha/kernel/core_cia.c printk("pci: disabling sg translation window\n"); printk 640 arch/alpha/kernel/core_cia.c printk("pci: cia revision %d%s\n", printk 702 arch/alpha/kernel/core_cia.c printk(KERN_ERR "Failed to request HAE_MEM\n"); printk 876 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA machine check: %s\n", msg); printk 877 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " DMA command: %s\n", cmd); printk 878 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " PCI address: %#010lx\n", addr); printk 879 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " %s, Lock: %d, DAC: %d\n", printk 920 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA machine check: %s\n", msg); printk 921 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " PCI command: %s\n", cmd); printk 922 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Master state: %s, Target state: %s\n", printk 924 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " PCI address: %#010lx, DAC: %d\n", printk 927 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA machine check: %s\n", msg); printk 928 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Unknown PCI error\n"); printk 929 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " PCI_ERR0 = %#08lx", cia->pci_err0); printk 930 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " PCI_ERR1 = %#08lx", cia->pci_err1); printk 931 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " PCI_ERR2 = %#08lx", cia->pci_err2); printk 949 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA machine check: %s\n", msg); printk 1024 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Memory port command: %s\n", mem_port_cmd); printk 1025 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Memory port address: %#010lx, mask: %#lx\n", printk 1027 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Memory sequencer state: %s\n", seq_state); printk 1028 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Memory set: %s\n", set_select); printk 1074 arch/alpha/kernel/core_cia.c printk (fmt, syn, i); printk 1099 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA machine check: System bus parity error\n"); printk 1100 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Command: %s, Parity bit: %d\n", cmd, par); printk 1101 arch/alpha/kernel/core_cia.c printk(KERN_CRIT " Address: %#010lx, Mask: %#lx\n", addr, mask); printk 1162 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1165 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1168 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1171 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1174 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1177 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1180 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1183 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1186 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1189 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 1192 arch/alpha/kernel/core_cia.c printk(KERN_CRIT "CIA lost machine check: " printk 39 arch/alpha/kernel/core_irongate.c # define DBG_CFG(args) printk args printk 172 arch/alpha/kernel/core_irongate.c printk("Iron stat_cmd %x\n", IRONGATE_jd); printk 178 arch/alpha/kernel/core_irongate.c printk("Iron ECC %x\n", IRONGATE_jd); printk 219 arch/alpha/kernel/core_irongate.c printk(KERN_WARNING "WARNING! Upgrade to SRM A5.6-19 " printk 238 arch/alpha/kernel/core_irongate.c printk("irongate_init_arch: initrd too big " printk 244 arch/alpha/kernel/core_irongate.c printk("irongate_init_arch: temporarily reserving " printk 354 arch/alpha/kernel/core_irongate.c printk("AGP ioremap failed... addr not page aligned (0x%lx)\n", printk 362 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap(0x%lx, 0x%lx)\n", addr, size); printk 363 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap: gart_bus_addr 0x%lx\n", gart_bus_addr); printk 364 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap: gart_aper_size 0x%lx\n", gart_aper_size); printk 365 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap: mmio_regs %p\n", mmio_regs); printk 366 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap: gatt_pages %p\n", gatt_pages); printk 372 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap: cur_gatt %p pte 0x%x\n", printk 392 arch/alpha/kernel/core_irongate.c printk("AGP ioremap: FAILED to map...\n"); printk 402 arch/alpha/kernel/core_irongate.c printk("irongate_ioremap(0x%lx, 0x%lx) returning 0x%lx\n", printk 151 arch/alpha/kernel/core_lca.c printk("lca.c:conf_read: got stat0=%lx\n", stat0); printk 188 arch/alpha/kernel/core_lca.c printk("lca.c:conf_write: got stat0=%lx\n", stat0); printk 340 arch/alpha/kernel/core_lca.c printk(" %s %s error to %s occurred at address %x\n", printk 347 arch/alpha/kernel/core_lca.c printk(" A b-cache tag parity error was detected.\n"); printk 350 arch/alpha/kernel/core_lca.c printk(" Several other correctable errors occurred.\n"); printk 353 arch/alpha/kernel/core_lca.c printk(" Several other uncorrectable errors occurred.\n"); printk 356 arch/alpha/kernel/core_lca.c printk(" Attempted to access non-existent memory.\n"); printk 378 arch/alpha/kernel/core_lca.c printk(" %s initiated PCI %s cycle to address %x" printk 383 arch/alpha/kernel/core_lca.c printk(" (Error occurred at PCI memory address %x.)\n", printk 387 arch/alpha/kernel/core_lca.c printk(" Other PCI errors occurred simultaneously.\n"); printk 401 arch/alpha/kernel/core_lca.c printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n", printk 431 arch/alpha/kernel/core_lca.c printk(KERN_CRIT printk 444 arch/alpha/kernel/core_lca.c printk(KERN_CRIT " Reason: %s (long frame%s):\n", printk 446 arch/alpha/kernel/core_lca.c printk(KERN_CRIT printk 449 arch/alpha/kernel/core_lca.c printk(KERN_CRIT " car: %#lx\n", el.l->car); printk 459 arch/alpha/kernel/core_lca.c printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size); printk 468 arch/alpha/kernel/core_lca.c printk(KERN_CRIT " +%8lx %016lx %016lx\n", printk 487 arch/alpha/kernel/core_lca.c printk("Status of clock control:\n"); printk 488 arch/alpha/kernel/core_lca.c printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg)); printk 489 arch/alpha/kernel/core_lca.c printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg)); printk 490 arch/alpha/kernel/core_lca.c printk("\tInterrupt override is %s\n", printk 492 arch/alpha/kernel/core_lca.c printk("\tDMA override is %s\n", printk 40 arch/alpha/kernel/core_marvel.c # define DBG_CFG(args) printk args printk 119 arch/alpha/kernel/core_marvel.c printk(KERN_WARNING "IO7 at PE %d already allocated!\n", pe); printk 147 arch/alpha/kernel/core_marvel.c printk(KERN_ERR "Too many IO7s at PE %d\n", printk 161 arch/alpha/kernel/core_marvel.c printk(KERN_WARNING "Failed to insert IO7 at PE %d " printk 259 arch/alpha/kernel/core_marvel.c printk(KERN_ERR "Failed to request IO on hose %d\n", printk 262 arch/alpha/kernel/core_marvel.c printk(KERN_ERR "Failed to request MEM on hose %d\n", printk 328 arch/alpha/kernel/core_marvel.c printk("FIXME: disabling master aborts\n"); printk 342 arch/alpha/kernel/core_marvel.c printk("Initializing IO7 at PID %d\n", io7->pe); printk 371 arch/alpha/kernel/core_marvel.c printk("Found an IO7 at PID %d\n", pe); printk 393 arch/alpha/kernel/core_marvel.c printk("console graphics is on hose %d (console)\n", h); printk 409 arch/alpha/kernel/core_marvel.c printk("Console graphics on hose %d\n", hose->index); printk 436 arch/alpha/kernel/core_marvel.c printk("User-specified IO7 at PID %lu\n", pid); printk 675 arch/alpha/kernel/core_marvel.c printk(KERN_WARNING "Illegal RTC port %lx\n", addr); printk 754 arch/alpha/kernel/core_marvel.c printk("ioremap failed... pte not valid...\n"); printk 763 arch/alpha/kernel/core_marvel.c printk("FAILED to map...\n"); printk 924 arch/alpha/kernel/core_marvel.c printk(KERN_ERR "Failed to reserve AGP memory\n"); printk 945 arch/alpha/kernel/core_marvel.c printk(KERN_WARNING printk 952 arch/alpha/kernel/core_marvel.c printk(KERN_ERR "Failed to release AGP memory\n"); printk 996 arch/alpha/kernel/core_marvel.c printk("%s: unknown PLL setting RNGB=%lx (PLL6_CTL=%016lx)\n", printk 1005 arch/alpha/kernel/core_marvel.c printk("Requested AGP Rate %dX not compatible " printk 1013 arch/alpha/kernel/core_marvel.c printk("Enabling AGP on hose %d: %dX%s RQ %d\n", printk 1047 arch/alpha/kernel/core_marvel.c printk("%s: addr out of range\n", __func__); printk 1053 arch/alpha/kernel/core_marvel.c printk("%s: pte not valid\n", __func__); printk 1103 arch/alpha/kernel/core_marvel.c printk("MARVEL - using hose %d as AGP\n", hose->index); printk 39 arch/alpha/kernel/core_mcpcia.c # define DBG_CFG(args) printk args printk 327 arch/alpha/kernel/core_mcpcia.c printk(KERN_ERR "Failed to request IO on hose %d\n", h); printk 329 arch/alpha/kernel/core_mcpcia.c printk(KERN_ERR "Failed to request MEM on hose %d\n", h); printk 331 arch/alpha/kernel/core_mcpcia.c printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h); printk 437 arch/alpha/kernel/core_mcpcia.c printk("mcpcia_init_hoses: found %d hoses\n", hose_count); printk 454 arch/alpha/kernel/core_mcpcia.c printk(" paltmp[%d-%d] = %16lx %16lx\n", printk 458 arch/alpha/kernel/core_mcpcia.c printk(" shadow[%d-%d] = %16lx %16lx\n", printk 462 arch/alpha/kernel/core_mcpcia.c printk(" Addr of excepting instruction = %16lx\n", printk 464 arch/alpha/kernel/core_mcpcia.c printk(" Summary of arithmetic traps = %16lx\n", printk 466 arch/alpha/kernel/core_mcpcia.c printk(" Exception mask = %16lx\n", printk 468 arch/alpha/kernel/core_mcpcia.c printk(" Base address for PALcode = %16lx\n", printk 470 arch/alpha/kernel/core_mcpcia.c printk(" Interrupt Status Reg = %16lx\n", printk 472 arch/alpha/kernel/core_mcpcia.c printk(" CURRENT SETUP OF EV5 IBOX = %16lx\n", printk 474 arch/alpha/kernel/core_mcpcia.c printk(" I-CACHE Reg %s parity error = %16lx\n", printk 478 arch/alpha/kernel/core_mcpcia.c printk(" D-CACHE error Reg = %16lx\n", printk 483 arch/alpha/kernel/core_mcpcia.c printk(" Data error in bank 1\n"); printk 486 arch/alpha/kernel/core_mcpcia.c printk(" Data error in bank 0\n"); printk 489 arch/alpha/kernel/core_mcpcia.c printk(" Tag error in bank 1\n"); printk 492 arch/alpha/kernel/core_mcpcia.c printk(" Tag error in bank 0\n"); printk 496 arch/alpha/kernel/core_mcpcia.c printk(" Effective VA = %16lx\n", printk 498 arch/alpha/kernel/core_mcpcia.c printk(" Reason for D-stream = %16lx\n", printk 500 arch/alpha/kernel/core_mcpcia.c printk(" EV5 SCache address = %16lx\n", printk 502 arch/alpha/kernel/core_mcpcia.c printk(" EV5 SCache TAG/Data parity = %16lx\n", printk 504 arch/alpha/kernel/core_mcpcia.c printk(" EV5 BC_TAG_ADDR = %16lx\n", printk 506 arch/alpha/kernel/core_mcpcia.c printk(" EV5 EI_ADDR: Phys addr of Xfer = %16lx\n", printk 508 arch/alpha/kernel/core_mcpcia.c printk(" Fill Syndrome = %16lx\n", printk 510 arch/alpha/kernel/core_mcpcia.c printk(" EI_STAT reg = %16lx\n", printk 512 arch/alpha/kernel/core_mcpcia.c printk(" LD_LOCK = %16lx\n", printk 553 arch/alpha/kernel/core_mcpcia.c printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n", printk 555 arch/alpha/kernel/core_mcpcia.c printk(" WHOAMI = %8x\n", iodpp->whoami); printk 556 arch/alpha/kernel/core_mcpcia.c printk(" PCI_REV = %8x\n", iodpp->pci_rev); printk 557 arch/alpha/kernel/core_mcpcia.c printk(" CAP_CTRL = %8x\n", iodpp->cap_ctrl); printk 558 arch/alpha/kernel/core_mcpcia.c printk(" HAE_MEM = %8x\n", iodpp->hae_mem); printk 559 arch/alpha/kernel/core_mcpcia.c printk(" HAE_IO = %8x\n", iodpp->hae_io); printk 560 arch/alpha/kernel/core_mcpcia.c printk(" INT_CTL = %8x\n", iodpp->int_ctl); printk 561 arch/alpha/kernel/core_mcpcia.c printk(" INT_REG = %8x\n", iodpp->int_reg); printk 562 arch/alpha/kernel/core_mcpcia.c printk(" INT_MASK0 = %8x\n", iodpp->int_mask0); printk 563 arch/alpha/kernel/core_mcpcia.c printk(" INT_MASK1 = %8x\n", iodpp->int_mask1); printk 564 arch/alpha/kernel/core_mcpcia.c printk(" MC_ERR0 = %8x\n", iodpp->mc_err0); printk 565 arch/alpha/kernel/core_mcpcia.c printk(" MC_ERR1 = %8x\n", iodpp->mc_err1); printk 566 arch/alpha/kernel/core_mcpcia.c printk(" CAP_ERR = %8x\n", iodpp->cap_err); printk 567 arch/alpha/kernel/core_mcpcia.c printk(" PCI_ERR1 = %8x\n", iodpp->pci_err1); printk 568 arch/alpha/kernel/core_mcpcia.c printk(" MDPA_STAT = %8x\n", iodpp->mdpa_stat); printk 569 arch/alpha/kernel/core_mcpcia.c printk(" MDPA_SYN = %8x\n", iodpp->mdpa_syn); printk 570 arch/alpha/kernel/core_mcpcia.c printk(" MDPB_STAT = %8x\n", iodpp->mdpb_stat); printk 571 arch/alpha/kernel/core_mcpcia.c printk(" MDPB_SYN = %8x\n", iodpp->mdpb_syn); printk 30 arch/alpha/kernel/core_polaris.c # define DBG_CFG(args) printk args printk 156 arch/alpha/kernel/core_polaris.c printk("polaris_init_arch(): trusting firmware for setup\n"); printk 74 arch/alpha/kernel/core_t2.c # define DBG(args) printk args printk 340 arch/alpha/kernel/core_t2.c printk("%s: setting WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", printk 367 arch/alpha/kernel/core_t2.c printk("%s: setting WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", printk 376 arch/alpha/kernel/core_t2.c printk("%s: HAE_1 was 0x%lx\n", __func__, srm_hae); /* HW is 0 */ printk 377 arch/alpha/kernel/core_t2.c printk("%s: HAE_2 was 0x%lx\n", __func__, *(vulp)T2_HAE_2); printk 378 arch/alpha/kernel/core_t2.c printk("%s: HAE_3 was 0x%lx\n", __func__, *(vulp)T2_HAE_3); printk 379 arch/alpha/kernel/core_t2.c printk("%s: HAE_4 was 0x%lx\n", __func__, *(vulp)T2_HAE_4); printk 380 arch/alpha/kernel/core_t2.c printk("%s: HBASE was 0x%lx\n", __func__, *(vulp)T2_HBASE); printk 382 arch/alpha/kernel/core_t2.c printk("%s: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", __func__, printk 384 arch/alpha/kernel/core_t2.c printk("%s: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", __func__, printk 423 arch/alpha/kernel/core_t2.c printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n", printk 442 arch/alpha/kernel/core_t2.c printk(KERN_ERR "Failed to request HAE_MEM\n"); printk 585 arch/alpha/kernel/core_t2.c printk("t2_machine_check(cpu%d): any_expected 0x%x -" printk 598 arch/alpha/kernel/core_t2.c printk("t2_machine_check(cpu%d): last_taken 0x%x - " printk 615 arch/alpha/kernel/core_t2.c printk("%s t2_mcheck(cpu%d): last_taken 0x%x - " printk 51 arch/alpha/kernel/core_titan.c # define DBG_CFG(args) printk args printk 286 arch/alpha/kernel/core_titan.c printk(KERN_ERR "Failed to request IO on hose %d\n", index); printk 288 arch/alpha/kernel/core_titan.c printk(KERN_ERR "Failed to request MEM on hose %d\n", index); printk 371 arch/alpha/kernel/core_titan.c printk("%s: titan_init_arch()\n", __func__); printk 372 arch/alpha/kernel/core_titan.c printk("%s: CChip registers:\n", __func__); printk 373 arch/alpha/kernel/core_titan.c printk("%s: CSR_CSC 0x%lx\n", __func__, TITAN_cchip->csc.csr); printk 374 arch/alpha/kernel/core_titan.c printk("%s: CSR_MTR 0x%lx\n", __func__, TITAN_cchip->mtr.csr); printk 375 arch/alpha/kernel/core_titan.c printk("%s: CSR_MISC 0x%lx\n", __func__, TITAN_cchip->misc.csr); printk 376 arch/alpha/kernel/core_titan.c printk("%s: CSR_DIM0 0x%lx\n", __func__, TITAN_cchip->dim0.csr); printk 377 arch/alpha/kernel/core_titan.c printk("%s: CSR_DIM1 0x%lx\n", __func__, TITAN_cchip->dim1.csr); printk 378 arch/alpha/kernel/core_titan.c printk("%s: CSR_DIR0 0x%lx\n", __func__, TITAN_cchip->dir0.csr); printk 379 arch/alpha/kernel/core_titan.c printk("%s: CSR_DIR1 0x%lx\n", __func__, TITAN_cchip->dir1.csr); printk 380 arch/alpha/kernel/core_titan.c printk("%s: CSR_DRIR 0x%lx\n", __func__, TITAN_cchip->drir.csr); printk 382 arch/alpha/kernel/core_titan.c printk("%s: DChip registers:\n", __func__); printk 383 arch/alpha/kernel/core_titan.c printk("%s: CSR_DSC 0x%lx\n", __func__, TITAN_dchip->dsc.csr); printk 384 arch/alpha/kernel/core_titan.c printk("%s: CSR_STR 0x%lx\n", __func__, TITAN_dchip->str.csr); printk 385 arch/alpha/kernel/core_titan.c printk("%s: CSR_DREV 0x%lx\n", __func__, TITAN_dchip->drev.csr); printk 515 arch/alpha/kernel/core_titan.c printk("ioremap failed... no vm_area...\n"); printk 525 arch/alpha/kernel/core_titan.c printk("ioremap failed... pte not valid...\n"); printk 534 arch/alpha/kernel/core_titan.c printk("FAILED to remap_area_pages...\n"); printk 607 arch/alpha/kernel/core_titan.c printk(KERN_ERR "Failed to reserve AGP memory\n"); printk 628 arch/alpha/kernel/core_titan.c printk(KERN_WARNING printk 635 arch/alpha/kernel/core_titan.c printk(KERN_ERR "Failed to release AGP memory\n"); printk 670 arch/alpha/kernel/core_titan.c printk("Enabling AGP: %dX%s\n", printk 708 arch/alpha/kernel/core_titan.c printk("%s: addr out of range\n", __func__); printk 714 arch/alpha/kernel/core_titan.c printk("%s: pte not valid\n", __func__); printk 51 arch/alpha/kernel/core_tsunami.c # define DBG_CFG(args) printk args printk 217 arch/alpha/kernel/core_tsunami.c printk("dont_care == 0x%lx\n", dont_care); printk 235 arch/alpha/kernel/core_tsunami.c printk("tsunami_probe_write: unit %d at 0x%016lx\n", source, printk 285 arch/alpha/kernel/core_tsunami.c printk(KERN_ERR "Failed to request IO on hose %d\n", index); printk 287 arch/alpha/kernel/core_tsunami.c printk(KERN_ERR "Failed to request MEM on hose %d\n", index); printk 388 arch/alpha/kernel/core_tsunami.c printk("%s: probing bogus address: 0x%016lx\n", __func__, bogus_addr); printk 389 arch/alpha/kernel/core_tsunami.c printk("\tprobe %s\n", printk 395 arch/alpha/kernel/core_tsunami.c printk("%s: CChip registers:\n", __func__); printk 396 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_CSC 0x%lx\n", __func__, TSUNAMI_cchip->csc.csr); printk 397 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_MTR 0x%lx\n", __func__, TSUNAMI_cchip.mtr.csr); printk 398 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_MISC 0x%lx\n", __func__, TSUNAMI_cchip->misc.csr); printk 399 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DIM0 0x%lx\n", __func__, TSUNAMI_cchip->dim0.csr); printk 400 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DIM1 0x%lx\n", __func__, TSUNAMI_cchip->dim1.csr); printk 401 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DIR0 0x%lx\n", __func__, TSUNAMI_cchip->dir0.csr); printk 402 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DIR1 0x%lx\n", __func__, TSUNAMI_cchip->dir1.csr); printk 403 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DRIR 0x%lx\n", __func__, TSUNAMI_cchip->drir.csr); printk 405 arch/alpha/kernel/core_tsunami.c printk("%s: DChip registers:\n"); printk 406 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DSC 0x%lx\n", __func__, TSUNAMI_dchip->dsc.csr); printk 407 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_STR 0x%lx\n", __func__, TSUNAMI_dchip->str.csr); printk 408 arch/alpha/kernel/core_tsunami.c printk("%s: CSR_DREV 0x%lx\n", __func__, TSUNAMI_dchip->drev.csr); printk 31 arch/alpha/kernel/core_wildfire.c # define DBG_CFG(args) printk args printk 92 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "Failed to request IO on qbb %d hose %d\n", printk 95 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "Failed to request MEM on qbb %d hose %d\n", printk 195 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "fast QSD_WHAMI at base %p is 0x%lx\n", fast, temp); printk 222 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSA_QBB_ID at base %p is 0x%lx\n", qsa, temp); printk 234 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "GPA_QBB_MAP[%d] at base %p is 0x%lx\n", printk 256 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSD_WHAMI at base %p is 0x%lx\n", qsd, temp); printk 265 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSA_QBB_POP_0 at base %p is 0x%lx\n", qsa, temp); printk 272 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSA_QBB_POP_1 at base %p is 0x%lx\n", qsa, temp); printk 279 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSA_QBB_ID at %p is 0x%lx\n", qsa, temp); printk 478 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "PCI registers for QBB %d hose %d (%p)\n", printk 481 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_IO_ADDR_EXT: 0x%16lx\n", printk 483 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_CTRL: 0x%16lx\n", pci->pci_ctrl.csr); printk 484 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_ERR_SUM: 0x%16lx\n", pci->pci_err_sum.csr); printk 485 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_ERR_ADDR: 0x%16lx\n", pci->pci_err_addr.csr); printk 486 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_STALL_CNT: 0x%16lx\n", pci->pci_stall_cnt.csr); printk 487 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_PEND_INT: 0x%16lx\n", pci->pci_pend_int.csr); printk 488 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCI_SENT_INT: 0x%16lx\n", pci->pci_sent_int.csr); printk 490 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " DMA window registers for QBB %d hose %d (%p)\n", printk 493 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " window %d: 0x%16lx 0x%16lx 0x%16lx\n", i, printk 498 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "\n"); printk 507 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "PCA registers for QBB %d PCA %d (%p)\n", printk 510 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCA_WHAT_AM_I: 0x%16lx\n", pca->pca_what_am_i.csr); printk 511 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCA_ERR_SUM: 0x%16lx\n", pca->pca_err_sum.csr); printk 512 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCA_PEND_INT: 0x%16lx\n", pca->pca_pend_int.csr); printk 513 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCA_SENT_INT: 0x%16lx\n", pca->pca_sent_int.csr); printk 514 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCA_STDIO_EL: 0x%16lx\n", printk 517 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " PCA target registers for QBB %d PCA %d (%p)\n", printk 520 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " target %d: 0x%16lx 0x%16lx\n", i, printk 525 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "\n"); printk 534 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSA registers for QBB %d (%p)\n", qbbno, qsa); printk 536 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSA_QBB_ID: 0x%16lx\n", qsa->qsa_qbb_id.csr); printk 537 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSA_PORT_ENA: 0x%16lx\n", qsa->qsa_port_ena.csr); printk 538 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSA_REF_INT: 0x%16lx\n", qsa->qsa_ref_int.csr); printk 541 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSA_CONFIG_%d: 0x%16lx\n", printk 545 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSA_QBB_POP_%d: 0x%16lx\n", printk 548 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "\n"); printk 556 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "QSD registers for QBB %d (%p)\n", qbbno, qsd); printk 558 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_WHAMI: 0x%16lx\n", qsd->qsd_whami.csr); printk 559 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_REV: 0x%16lx\n", qsd->qsd_rev.csr); printk 560 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_PORT_PRESENT: 0x%16lx\n", printk 562 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_PORT_ACTIVE: 0x%16lx\n", printk 564 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_FAULT_ENA: 0x%16lx\n", printk 566 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_CPU_INT_ENA: 0x%16lx\n", printk 568 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_MEM_CONFIG: 0x%16lx\n", printk 570 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " QSD_ERR_SUM: 0x%16lx\n", printk 573 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "\n"); printk 582 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "IOP registers for QBB %d (%p)\n", qbbno, iop); printk 584 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " IOA_CONFIG: 0x%16lx\n", iop->ioa_config.csr); printk 585 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " IOD_CONFIG: 0x%16lx\n", iop->iod_config.csr); printk 586 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " IOP_SWITCH_CREDITS: 0x%16lx\n", printk 588 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " IOP_HOSE_CREDITS: 0x%16lx\n", printk 592 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " IOP_HOSE_%d_INIT: 0x%16lx\n", printk 595 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " IOP_DEV_INT_TARGET_%d: 0x%16lx\n", printk 598 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "\n"); printk 607 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "GP registers for QBB %d (%p)\n", qbbno, gp); printk 609 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_QBB_MAP_%d: 0x%16lx\n", printk 612 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_MEM_POP_MAP: 0x%16lx\n", printk 614 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_SCRATCH: 0x%16lx\n", gp->gpa_scratch.csr); printk 615 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_DIAG: 0x%16lx\n", gp->gpa_diag.csr); printk 616 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_CONFIG_0: 0x%16lx\n", gp->gpa_config_0.csr); printk 617 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_INIT_ID: 0x%16lx\n", gp->gpa_init_id.csr); printk 618 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " GPA_CONFIG_2: 0x%16lx\n", gp->gpa_config_2.csr); printk 620 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "\n"); printk 630 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR "Probed Hardware Configuration\n"); printk 632 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " hard_qbb_mask: 0x%16lx\n", wildfire_hard_qbb_mask); printk 633 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " soft_qbb_mask: 0x%16lx\n", wildfire_soft_qbb_mask); printk 635 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " gp_mask: 0x%16lx\n", wildfire_gp_mask); printk 636 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " hs_mask: 0x%16lx\n", wildfire_hs_mask); printk 637 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " iop_mask: 0x%16lx\n", wildfire_iop_mask); printk 638 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " ior_mask: 0x%16lx\n", wildfire_ior_mask); printk 639 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " pca_mask: 0x%16lx\n", wildfire_pca_mask); printk 641 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " cpu_mask: 0x%16lx\n", wildfire_cpu_mask); printk 642 arch/alpha/kernel/core_wildfire.c printk(KERN_ERR " mem_mask: 0x%16lx\n", wildfire_mem_mask); printk 644 arch/alpha/kernel/core_wildfire.c printk(" hard_qbb_map: "); printk 647 arch/alpha/kernel/core_wildfire.c printk("--- "); printk 649 arch/alpha/kernel/core_wildfire.c printk("%3d ", wildfire_hard_qbb_map[i]); printk 650 arch/alpha/kernel/core_wildfire.c printk("\n"); printk 652 arch/alpha/kernel/core_wildfire.c printk(" soft_qbb_map: "); printk 655 arch/alpha/kernel/core_wildfire.c printk("--- "); printk 657 arch/alpha/kernel/core_wildfire.c printk("%3d ", wildfire_soft_qbb_map[i]); printk 658 arch/alpha/kernel/core_wildfire.c printk("\n"); printk 40 arch/alpha/kernel/err_common.c printk("%s %08x: %016lx %s\n", printk 50 arch/alpha/kernel/err_common.c printk("%s -- Frame Header --\n" printk 72 arch/alpha/kernel/err_common.c printk("%s -- System Region --\n", err_print_prefix); printk 77 arch/alpha/kernel/err_common.c printk("%s -- End of Frame --\n", err_print_prefix); printk 97 arch/alpha/kernel/err_common.c printk("%s** Unexpected header CLASS %d TYPE %d, aborting\n", printk 132 arch/alpha/kernel/err_common.c printk("%s** Unknown header - CLASS %d TYPE %d, aborting\n", printk 138 arch/alpha/kernel/err_common.c printk("%s*** %s:\n" printk 172 arch/alpha/kernel/err_common.c printk("%s TIMESTAMP: %d/%d/%02d %d:%02d:%0d\n", printk 189 arch/alpha/kernel/err_common.c printk("%sPROCESSING SUBPACKET %d\n", err_print_prefix, i); printk 208 arch/alpha/kernel/err_common.c printk("%s** Unexpected header CLASS %d TYPE %d" printk 233 arch/alpha/kernel/err_common.c printk("%s %s\n", err_print_prefix, a->description); printk 248 arch/alpha/kernel/err_common.c printk("%s******* CONSOLE DATA LOG FOR CPU %d. *******\n" printk 258 arch/alpha/kernel/err_common.c printk("%s*** %d total error(s) logged\n" printk 289 arch/alpha/kernel/err_common.c printk("Attempted to re-register " printk 310 arch/alpha/kernel/err_common.c printk("Attempted to re-register " printk 37 arch/alpha/kernel/err_ev6.c printk("%s Icache parity error\n", err_print_prefix); printk 68 arch/alpha/kernel/err_ev6.c printk("%s Dcache tag parity error on probe\n", printk 71 arch/alpha/kernel/err_ev6.c printk("%s Dcache tag parity error - pipe 0\n", printk 74 arch/alpha/kernel/err_ev6.c printk("%s Dcache tag parity error - pipe 1\n", printk 77 arch/alpha/kernel/err_ev6.c printk("%s ECC error occurred on a store\n", printk 80 arch/alpha/kernel/err_ev6.c printk("%s ECC error occurred on a %s load\n", printk 84 arch/alpha/kernel/err_ev6.c printk("%s Dcache second error\n", err_print_prefix); printk 141 arch/alpha/kernel/err_ev6.c printk("%s Bcache tag parity error\n", err_print_prefix); printk 146 arch/alpha/kernel/err_ev6.c printk("%s Dcache tag parity error\n", err_print_prefix); printk 152 arch/alpha/kernel/err_ev6.c printk("%s Bcache single-bit error on a probe hit\n", printk 158 arch/alpha/kernel/err_ev6.c printk("%s %s-STREAM %s-BIT ECC error from %s\n", printk 162 arch/alpha/kernel/err_ev6.c printk("%s Address: 0x%016llx\n" printk 170 arch/alpha/kernel/err_ev6.c printk("%s Block status: %s%s%s%s\n", printk 209 arch/alpha/kernel/err_ev6.c printk("%s EXC_ADDR: 0x%016lx IER_CM: 0x%016lx" printk 218 arch/alpha/kernel/err_ev6.c printk("%s UNKNOWN error, frame follows:\n", printk 259 arch/alpha/kernel/err_ev6.c printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d:\n", printk 66 arch/alpha/kernel/err_ev7.c printk("%s**UNEXPECTED SUBPACKET CLASS %d " printk 133 arch/alpha/kernel/err_ev7.c printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d\n", printk 240 arch/alpha/kernel/err_ev7.c printk("%s ** Unexpected header CLASS %d TYPE %d, aborting\n", printk 250 arch/alpha/kernel/err_ev7.c printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", printk 255 arch/alpha/kernel/err_ev7.c printk("%s EXC_ADDR: %016llx\n" printk 264 arch/alpha/kernel/err_ev7.c printk("%s ** PAL TYPE %d SUBPACKET\n", printk 53 arch/alpha/kernel/err_marvel.c printk("%s**%s event (cabinet %d, drawer %d)\n", printk 58 arch/alpha/kernel/err_marvel.c printk("%s Module Type: 0x%x - Unit ID 0x%x - " printk 112 arch/alpha/kernel/err_marvel.c printk("%s Packet In Error: %s\n" printk 132 arch/alpha/kernel/err_marvel.c printk("%s Correctable Error Symptoms:\n" printk 186 arch/alpha/kernel/err_marvel.c printk("%s Uncorrectable Error Symptoms:\n", err_print_prefix); printk 190 arch/alpha/kernel/err_marvel.c printk("%s Syndrome: 0x%llx\n", printk 201 arch/alpha/kernel/err_marvel.c printk("%s Clock %s: %s\n", printk 207 arch/alpha/kernel/err_marvel.c printk("%s REQ Credit Timeout or Overflow\n", printk 210 arch/alpha/kernel/err_marvel.c printk("%s RIO Credit Timeout or Overflow\n", printk 213 arch/alpha/kernel/err_marvel.c printk("%s WIO Credit Timeout or Overflow\n", printk 216 arch/alpha/kernel/err_marvel.c printk("%s BLK Credit Timeout or Overflow\n", printk 219 arch/alpha/kernel/err_marvel.c printk("%s NBK Credit Timeout or Overflow\n", printk 223 arch/alpha/kernel/err_marvel.c printk("%s Read I/O Buffer Overflow\n", printk 226 arch/alpha/kernel/err_marvel.c printk("%s Write I/O Buffer Overflow\n", printk 229 arch/alpha/kernel/err_marvel.c printk("%s FWD Buffer Overflow\n", printk 238 arch/alpha/kernel/err_marvel.c printk("%s Error Response sent to %s", printk 242 arch/alpha/kernel/err_marvel.c printk("%s Lost Error sent somewhere else\n", printk 250 arch/alpha/kernel/err_marvel.c printk("%s Error Reported by %s", printk 271 arch/alpha/kernel/err_marvel.c printk("%s Starvation Int Trigger By: %s\n", printk 316 arch/alpha/kernel/err_marvel.c printk("%s Up Hose Garbage Symptom:\n" printk 325 arch/alpha/kernel/err_marvel.c printk("%s Packet Offset 0x%08llx\n", printk 372 arch/alpha/kernel/err_marvel.c printk("%s %sSingle Bit Error(s) detected/corrected\n", printk 383 arch/alpha/kernel/err_marvel.c printk("%s Halt Interrupt posted", err_print_prefix); printk 385 arch/alpha/kernel/err_marvel.c printk("%s Hot Plug Event Interrupt posted", printk 390 arch/alpha/kernel/err_marvel.c printk("%s Correctable Error Interrupt posted", printk 393 arch/alpha/kernel/err_marvel.c printk("%s Starvation Interrupt posted", err_print_prefix); printk 397 arch/alpha/kernel/err_marvel.c printk("%s Hard Error Interrupt posted", err_print_prefix); printk 424 arch/alpha/kernel/err_marvel.c printk("%s Write byte into IO7 CSR\n", err_print_prefix); printk 426 arch/alpha/kernel/err_marvel.c printk("%s PIO to non-existent CSR\n", err_print_prefix); printk 428 arch/alpha/kernel/err_marvel.c printk("%s Bus Requester PID (Access Violation)\n", printk 431 arch/alpha/kernel/err_marvel.c printk("%s Received NXM response from EV7\n", printk 434 arch/alpha/kernel/err_marvel.c printk("%s Received ERROR RESPONSE\n", err_print_prefix); printk 436 arch/alpha/kernel/err_marvel.c printk("%s Clock error on data flit\n", err_print_prefix); printk 438 arch/alpha/kernel/err_marvel.c printk("%s Double Bit Error Data Error Detected\n", printk 441 arch/alpha/kernel/err_marvel.c printk("%s Garbage Encoding Detected on the data\n", printk 444 arch/alpha/kernel/err_marvel.c printk("%s Garbage Encoding sent up hose\n", printk 449 arch/alpha/kernel/err_marvel.c printk("%s Orphan response (unexpected response)\n", printk 452 arch/alpha/kernel/err_marvel.c printk("%s Down hose packet overflow\n", err_print_prefix); printk 454 arch/alpha/kernel/err_marvel.c printk("%s Down hose credit overflow\n", err_print_prefix); printk 456 arch/alpha/kernel/err_marvel.c printk("%s Unexpected or bad dealloc field\n", printk 463 arch/alpha/kernel/err_marvel.c printk("%s BLACK HOLE: Timeout for all responses\n", printk 466 arch/alpha/kernel/err_marvel.c printk("%s BLACK HOLE: Credit Timeout\n", err_print_prefix); printk 468 arch/alpha/kernel/err_marvel.c printk("%s BLACK HOLE: Clock check on header\n", printk 471 arch/alpha/kernel/err_marvel.c printk("%s BLACK HOLE: Uncorrectable Error on header\n", printk 474 arch/alpha/kernel/err_marvel.c printk("%s BLACK HOLE: Garbage on header\n", printk 477 arch/alpha/kernel/err_marvel.c printk("%s BLACK HOLE: Bad EV7 command\n", printk 481 arch/alpha/kernel/err_marvel.c printk("%s Lost Error\n", err_print_prefix); printk 483 arch/alpha/kernel/err_marvel.c printk("%s Failing Packet:\n" printk 519 arch/alpha/kernel/err_marvel.c printk("%s TLB Error on index 0x%llx:\n" printk 555 arch/alpha/kernel/err_marvel.c printk("%s Split Completion Error:\n" printk 587 arch/alpha/kernel/err_marvel.c printk("%s Message: %s\n", err_print_prefix, message); printk 624 arch/alpha/kernel/err_marvel.c printk("%s Transaction Summary:\n" printk 697 arch/alpha/kernel/err_marvel.c printk("%s IO7 Master Retry Timeout expired\n", printk 700 arch/alpha/kernel/err_marvel.c printk("%s Unexpected Split Completion\n", printk 703 arch/alpha/kernel/err_marvel.c printk("%s IO7 Split Completion Timeout expired\n", printk 706 arch/alpha/kernel/err_marvel.c printk("%s Hung bus during DMA transaction\n", printk 709 arch/alpha/kernel/err_marvel.c printk("%s Master Abort\n", err_print_prefix); printk 711 arch/alpha/kernel/err_marvel.c printk("%s IO7 Asserted Target Abort\n", err_print_prefix); printk 713 arch/alpha/kernel/err_marvel.c printk("%s IO7 Received Target Abort\n", err_print_prefix); printk 715 arch/alpha/kernel/err_marvel.c printk("%s Address or PCI-X Attribute Parity Error\n", printk 718 arch/alpha/kernel/err_marvel.c printk("%s IO7 Asserted SERR\n", err_print_prefix); printk 722 arch/alpha/kernel/err_marvel.c printk("%s IO7 Detected Data Parity Error\n", printk 725 arch/alpha/kernel/err_marvel.c printk("%s Split Completion Response with " printk 729 arch/alpha/kernel/err_marvel.c printk("%s PERR detected\n", err_print_prefix); printk 731 arch/alpha/kernel/err_marvel.c printk("%s PERR while IO7 is master\n", err_print_prefix); printk 733 arch/alpha/kernel/err_marvel.c printk("%s IO7 Received Split Completion Error message\n", printk 752 arch/alpha/kernel/err_marvel.c printk("%s UPE Error:\n", err_print_prefix); printk 755 arch/alpha/kernel/err_marvel.c printk("%s %s\n", err_print_prefix, printk 770 arch/alpha/kernel/err_marvel.c printk("%s TLB ERROR\n", err_print_prefix); printk 778 arch/alpha/kernel/err_marvel.c printk("%s AGP Request Queue Overflow\n", err_print_prefix); printk 780 arch/alpha/kernel/err_marvel.c printk("%s AGP Sync Error\n", err_print_prefix); printk 782 arch/alpha/kernel/err_marvel.c printk("%s Discarded split completion\n", err_print_prefix); printk 784 arch/alpha/kernel/err_marvel.c printk("%s DMA Read Timeout\n", err_print_prefix); printk 786 arch/alpha/kernel/err_marvel.c printk("%s CSR NXM READ\n", err_print_prefix); printk 788 arch/alpha/kernel/err_marvel.c printk("%s CSR NXM WRITE\n", err_print_prefix); printk 790 arch/alpha/kernel/err_marvel.c printk("%s SERR detected\n", err_print_prefix); printk 792 arch/alpha/kernel/err_marvel.c printk("%s HUNG BUS detected\n", err_print_prefix); printk 958 arch/alpha/kernel/err_marvel.c printk("%s*Error occurred on IO7 at PID %u\n", printk 968 arch/alpha/kernel/err_marvel.c printk("%s PORT 7 ERROR:\n" printk 992 arch/alpha/kernel/err_marvel.c printk("%s PID %u PORT %d POx_ERR_SUM: %016llx\n", printk 997 arch/alpha/kernel/err_marvel.c printk("%s [ POx_FIRST_ERR: %016llx ]\n", printk 1133 arch/alpha/kernel/err_marvel.c printk("%s*%s (Vector 0x%x) reported on CPU %d\n", printk 1142 arch/alpha/kernel/err_marvel.c printk("%s*%s (Vector 0x%x) reported on CPU %d\n", printk 66 arch/alpha/kernel/err_titan.c printk("%s Non-existent memory access from: %s %d\n", printk 115 arch/alpha/kernel/err_titan.c printk("%s PChip %d SERROR: %016llx\n", printk 118 arch/alpha/kernel/err_titan.c printk("%s %sorrectable ECC Error:\n" printk 129 arch/alpha/kernel/err_titan.c printk("%s Non Existent I/O Error\n", err_print_prefix); printk 131 arch/alpha/kernel/err_titan.c printk("%s Lost Uncorrectable ECC Error\n", printk 134 arch/alpha/kernel/err_titan.c printk("%s Lost Correctable ECC Error\n", err_print_prefix); printk 232 arch/alpha/kernel/err_titan.c printk("%s PChip %d %cPERROR: %016llx\n", printk 236 arch/alpha/kernel/err_titan.c printk("%s Invalid Peer-to-Peer Write\n", err_print_prefix); printk 238 arch/alpha/kernel/err_titan.c printk("%s Invalid Peer-to-Peer Read\n", err_print_prefix); printk 240 arch/alpha/kernel/err_titan.c printk("%s No DEVSEL as PCI Master [Master Abort]\n", printk 243 arch/alpha/kernel/err_titan.c printk("%s Data Parity Error\n", err_print_prefix); printk 245 arch/alpha/kernel/err_titan.c printk("%s Target Abort\n", err_print_prefix); printk 247 arch/alpha/kernel/err_titan.c printk("%s Address Parity Error\n", err_print_prefix); printk 249 arch/alpha/kernel/err_titan.c printk("%s Scatter-Gather Error, Invalid PTE\n", printk 252 arch/alpha/kernel/err_titan.c printk("%s Delayed-Completion Retry Timeout\n", printk 255 arch/alpha/kernel/err_titan.c printk("%s PERR Asserted\n", err_print_prefix); printk 257 arch/alpha/kernel/err_titan.c printk("%s SERR Asserted\n", err_print_prefix); printk 259 arch/alpha/kernel/err_titan.c printk("%s Lost Error\n", err_print_prefix); printk 260 arch/alpha/kernel/err_titan.c printk("%s Command: 0x%x - %s\n" printk 266 arch/alpha/kernel/err_titan.c printk("%s Dual Address Cycle\n", err_print_prefix); printk 268 arch/alpha/kernel/err_titan.c printk("%s Hit in Monster Window\n", err_print_prefix); printk 325 arch/alpha/kernel/err_titan.c printk("%s PChip %d AGPERROR: %016llx\n", err_print_prefix, printk 328 arch/alpha/kernel/err_titan.c printk("%s No Window\n", err_print_prefix); printk 330 arch/alpha/kernel/err_titan.c printk("%s Peer-to-Peer set\n", err_print_prefix); printk 332 arch/alpha/kernel/err_titan.c printk("%s Invalid PTE\n", err_print_prefix); printk 334 arch/alpha/kernel/err_titan.c printk("%s Reserved Command\n", err_print_prefix); printk 336 arch/alpha/kernel/err_titan.c printk("%s HP Transaction Received while Queue Full\n", printk 339 arch/alpha/kernel/err_titan.c printk("%s LP Transaction Received while Queue Full\n", printk 342 arch/alpha/kernel/err_titan.c printk("%s Lost Error\n", err_print_prefix); printk 343 arch/alpha/kernel/err_titan.c printk("%s Command: 0x%x - %s, %d Quadwords%s\n" printk 349 arch/alpha/kernel/err_titan.c printk("%s Dual Address Cycle\n", err_print_prefix); printk 351 arch/alpha/kernel/err_titan.c printk("%s Hit in Monster Window\n", err_print_prefix); printk 443 arch/alpha/kernel/err_titan.c printk("%s" printk 538 arch/alpha/kernel/err_titan.c printk("%s ** Unexpected header CLASS %d TYPE %d, aborting\n", printk 550 arch/alpha/kernel/err_titan.c printk("%s ** Occurred on CPU %d:\n", printk 557 arch/alpha/kernel/err_titan.c printk("%s ** REGATTA TYPE %d SUBPACKET\n", printk 604 arch/alpha/kernel/err_titan.c printk("%s Summary Flags: %016llx\n" printk 698 arch/alpha/kernel/err_titan.c printk("%s** Unknown Error, frame follows\n", printk 739 arch/alpha/kernel/err_titan.c printk("%s*System Event (Vector 0x%x) reported on CPU %d:\n", printk 21 arch/alpha/kernel/gct.c printk(KERN_ERR "GCT Node MAGIC incorrect - GCT invalid\n"); printk 38 arch/alpha/kernel/irq.c printk(KERN_CRIT "Unexpected IRQ trap at vector %u\n", irq); printk 115 arch/alpha/kernel/irq.c printk(KERN_CRIT "device_interrupt: invalid interrupt %d\n", printk 34 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "Performance counter interrupt!\n"); printk 64 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "Interprocessor interrupt? " printk 87 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n", printk 90 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps); printk 141 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "%s machine check %s\n", machine, printk 155 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n", printk 194 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT "machine check type: %s%s\n", printk 205 arch/alpha/kernel/irq_alpha.c printk(KERN_CRIT " +%8lx %016lx %016lx\n", printk 15 arch/alpha/kernel/module.c #define DEBUGP printk printk 87 arch/alpha/kernel/module.c printk(KERN_ERR "module %s: no symbol table\n", me->name); printk 91 arch/alpha/kernel/module.c printk(KERN_ERR "module %s: no got section\n", me->name); printk 98 arch/alpha/kernel/module.c printk(KERN_ERR printk 256 arch/alpha/kernel/module.c printk(KERN_ERR "module %s: Unknown relocation: %lu\n", printk 261 arch/alpha/kernel/module.c printk(KERN_ERR printk 265 arch/alpha/kernel/module.c printk(KERN_ERR printk 80 arch/alpha/kernel/osf_sys.c printk("set_program_attributes(%lx %lx %lx %lx)\n", printk 185 arch/alpha/kernel/osf_sys.c printk("%s: unimplemented OSF mmap flags %04lx\n", printk 524 arch/alpha/kernel/osf_sys.c printk("osf_mount(%ld, %x)\n", typenr, flag); printk 745 arch/alpha/kernel/osf_sys.c printk("sysinfo(%d)", command); printk 77 arch/alpha/kernel/pc873xx.c printk(KERN_INFO "PC873xx enabling EPP v1.9\n"); printk 86 arch/alpha/kernel/pc873xx.c printk(KERN_INFO "PC873xx enabling IDE interrupt\n"); printk 219 arch/alpha/kernel/pci.c printk(KERN_INFO "pci: enabling save/restore of SRM state\n"); printk 225 arch/alpha/kernel/pci.c printk(KERN_ERR "%s: kmalloc() failed!\n", __func__); printk 279 arch/alpha/kernel/pci.c printk("PCI: Setting latency timer of device %s to 64\n", printk 26 arch/alpha/kernel/pci_iommu.c # define DBGA(args...) printk(KERN_DEBUG args) printk 31 arch/alpha/kernel/pci_iommu.c # define DBGA2(args...) printk(KERN_DEBUG args) printk 79 arch/alpha/kernel/pci_iommu.c printk("%s: couldn't allocate arena from node %d\n" printk 90 arch/alpha/kernel/pci_iommu.c printk("%s: couldn't allocate arena ptes from node %d\n" printk 320 arch/alpha/kernel/pci_iommu.c printk(KERN_WARNING "pci_map_single failed: " printk 417 arch/alpha/kernel/pci_iommu.c printk(KERN_ERR "Bogus pci_unmap_single: dma_addr %llx " printk 460 arch/alpha/kernel/pci_iommu.c printk(KERN_INFO "pci_alloc_consistent: " printk 723 arch/alpha/kernel/pci_iommu.c printk(KERN_WARNING "pci_map_sg failed: no entries?\n"); printk 729 arch/alpha/kernel/pci_iommu.c printk(KERN_WARNING "pci_map_sg failed: " printk 36 arch/alpha/kernel/ptrace.c #define DBG(fac,args) {if ((fac) & DEBUG) printk args;} printk 245 arch/alpha/kernel/ptrace.c printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved); printk 41 arch/alpha/kernel/rtc.c printk("Ignoring invalid user specified epoch %lu\n", epoch); printk 77 arch/alpha/kernel/rtc.c printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year); printk 304 arch/alpha/kernel/setup.c printk("initrd moved to %p\n", start); printk 325 arch/alpha/kernel/setup.c printk("memcluster %lu, usage %01lx, start %8lu, end %8lu\n", printk 363 arch/alpha/kernel/setup.c printk("setup: forcing memory size to %ldK (from %ldK).\n", printk 377 arch/alpha/kernel/setup.c printk("Initial ramdisk at: 0x%p (%lu bytes)\n", printk 382 arch/alpha/kernel/setup.c printk("initrd extends beyond end of memory " printk 582 arch/alpha/kernel/setup.c printk("Booting " printk 591 arch/alpha/kernel/setup.c printk("Major Options: " printk 623 arch/alpha/kernel/setup.c printk("Command line: %s\n", command_line); printk 678 arch/alpha/kernel/setup.c printk("Max ASN from HWRPB is bad (0x%lx)\n", hwrpb->max_asn); printk 1267 arch/alpha/kernel/setup.c printk("%ldK Bcache detected; load hit latency %d " printk 366 arch/alpha/kernel/signal.c printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", printk 420 arch/alpha/kernel/signal.c printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", printk 15 arch/alpha/kernel/smc37c669.c # define DBG_DEVS(args) printk args printk 1887 arch/alpha/kernel/smc37c669.c printk( " Serial 0: Enabled [ Port 0x%x, IRQ %d ]\n", printk 1893 arch/alpha/kernel/smc37c669.c printk( " Serial 0: Disabled\n" ); printk 1897 arch/alpha/kernel/smc37c669.c printk( " Serial 1: Enabled [ Port 0x%x, IRQ %d ]\n", printk 1903 arch/alpha/kernel/smc37c669.c printk( " Serial 1: Disabled\n" ); printk 1907 arch/alpha/kernel/smc37c669.c printk( " Parallel: Enabled [ Port 0x%x, IRQ %d/%d ]\n", printk 1914 arch/alpha/kernel/smc37c669.c printk( " Parallel: Disabled\n" ); printk 1918 arch/alpha/kernel/smc37c669.c printk( " Floppy Ctrl: Enabled [ Port 0x%x, IRQ %d/%d ]\n", printk 1925 arch/alpha/kernel/smc37c669.c printk( " Floppy Ctrl: Disabled\n" ); printk 1929 arch/alpha/kernel/smc37c669.c printk( " IDE 0: Enabled [ Port 0x%x, IRQ %d ]\n", printk 1935 arch/alpha/kernel/smc37c669.c printk( " IDE 0: Disabled\n" ); printk 2438 arch/alpha/kernel/smc37c669.c printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i)); printk 2528 arch/alpha/kernel/smc37c669.c printk( "SMC37c669 Super I/O Controller found @ 0x%p\n", printk 2534 arch/alpha/kernel/smc37c669.c printk( "No SMC37c669 Super I/O Controller found\n" ); printk 18 arch/alpha/kernel/smc37c93x.c # define DBG_DEVS(args) printk args printk 221 arch/alpha/kernel/smc37c93x.c printk(currentControl & (1 << FDC) printk 223 arch/alpha/kernel/smc37c93x.c printk(currentControl & (1 << IDE1) printk 225 arch/alpha/kernel/smc37c93x.c printk(currentControl & (1 << IDE2) printk 227 arch/alpha/kernel/smc37c93x.c printk(currentControl & (1 << PARP) printk 229 arch/alpha/kernel/smc37c93x.c printk(currentControl & (1 << SER1) printk 231 arch/alpha/kernel/smc37c93x.c printk(currentControl & (1 << SER2) printk 234 arch/alpha/kernel/smc37c93x.c printk( "\n" ); printk 265 arch/alpha/kernel/smc37c93x.c printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n", printk 50 arch/alpha/kernel/smp.c #define DBGS(args) printk args printk 111 arch/alpha/kernel/smp.c printk("wait_boot_cpu_to_stop: FAILED on CPU %d, hanging now\n", cpuid); printk 125 arch/alpha/kernel/smp.c printk("??, cpu 0x%x already present??\n", cpuid); printk 231 arch/alpha/kernel/smp.c printk("Processor %x not ready\n", cpuid); printk 351 arch/alpha/kernel/smp.c printk(KERN_ERR "SMP: Processor %d failed to start.\n", cpuid); printk 390 arch/alpha/kernel/smp.c printk(KERN_ERR "SMP: Processor %d is stuck.\n", cpuid); printk 409 arch/alpha/kernel/smp.c printk(KERN_WARNING "SMP: Booting off cpu %d instead of 0?\n", printk 442 arch/alpha/kernel/smp.c printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n", printk 464 arch/alpha/kernel/smp.c printk(KERN_INFO "SMP mode deactivated.\n"); printk 468 arch/alpha/kernel/smp.c printk(KERN_INFO "SMP starting up secondaries.\n"); printk 496 arch/alpha/kernel/smp.c printk(KERN_INFO "SMP: Total of %d processors activated " printk 558 arch/alpha/kernel/smp.c printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n", printk 578 arch/alpha/kernel/smp.c printk(KERN_WARNING printk 592 arch/alpha/kernel/smp.c printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n"); printk 141 arch/alpha/kernel/srm_env.c printk(KERN_INFO "%s: This Alpha system doesn't " printk 153 arch/alpha/kernel/srm_env.c printk(KERN_ERR "Couldn't create base dir /proc/%s\n", printk 163 arch/alpha/kernel/srm_env.c printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n", printk 173 arch/alpha/kernel/srm_env.c printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n", printk 201 arch/alpha/kernel/srm_env.c printk(KERN_INFO "%s: version %s loaded successfully\n", NAME, printk 215 arch/alpha/kernel/srm_env.c printk(KERN_INFO "%s: unloaded successfully\n", NAME); printk 244 arch/alpha/kernel/sys_alcor.c printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n", printk 226 arch/alpha/kernel/sys_cabriolet.c printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); printk 228 arch/alpha/kernel/sys_cabriolet.c printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", printk 104 arch/alpha/kernel/sys_eb64p.c printk("Detected Cabriolet: correcting HWRPB.\n"); printk 103 arch/alpha/kernel/sys_jensen.c printk("Whee.. NMI received. Probable hardware error\n"); printk 104 arch/alpha/kernel/sys_jensen.c printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461)); printk 115 arch/alpha/kernel/sys_jensen.c printk("Unknown local interrupt %lx\n", vector); printk 156 arch/alpha/kernel/sys_jensen.c printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n", printk 214 arch/alpha/kernel/sys_jensen.c printk(KERN_CRIT "Machine check\n"); printk 81 arch/alpha/kernel/sys_marvel.c printk(KERN_ERR printk 91 arch/alpha/kernel/sys_marvel.c printk(KERN_ERR printk 114 arch/alpha/kernel/sys_marvel.c printk(KERN_ERR "%s: get_ctl failed for irq %x\n", printk 135 arch/alpha/kernel/sys_marvel.c printk(KERN_ERR "%s: get_ctl failed for irq %x\n", printk 253 arch/alpha/kernel/sys_marvel.c printk("Initializing interrupts for IO7 at PE %u - base %lx\n", printk 265 arch/alpha/kernel/sys_marvel.c printk(" Interrupts reported to CPU at PE %u\n", boot_cpuid); printk 350 arch/alpha/kernel/sys_marvel.c printk("PCI:%d:%d:%d (hose %d) is using MSI\n", printk 355 arch/alpha/kernel/sys_marvel.c printk(" %d message(s) from 0x%04x\n", printk 358 arch/alpha/kernel/sys_marvel.c printk(" reporting on %d IRQ(s) from %d (0x%x)\n", printk 370 arch/alpha/kernel/sys_marvel.c printk(" forcing LSI interrupt on irq %d [0x%x]\n", irq, irq); printk 416 arch/alpha/kernel/sys_marvel.c printk("Redirecting IO7 interrupts to local CPU at PE %u\n", cpuid); printk 124 arch/alpha/kernel/sys_nautilus.c printk("PC %lx RA %lx\n", regs->pc, regs->r26); printk 176 arch/alpha/kernel/sys_nautilus.c printk(KERN_CRIT "NAUTILUS Machine check 0x%lx " printk 263 arch/alpha/kernel/sys_nautilus.c printk(KERN_ERR "Failed to request MEM on hose 0\n"); printk 270 arch/alpha/kernel/sys_nautilus.c printk("nautilus_init_pci: %ldk freed\n", printk 456 arch/alpha/kernel/sys_sable.c printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n", printk 472 arch/alpha/kernel/sys_sable.c printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n", printk 509 arch/alpha/kernel/sys_sable.c printk("%s: vector 0x%lx bit 0x%x irq 0x%x\n", printk 93 arch/alpha/kernel/sys_sio.c printk("%s: PIRQ original 0x%x new 0x%x\n", __func__, printk 237 arch/alpha/kernel/sys_sio.c printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); printk 239 arch/alpha/kernel/sys_sio.c printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", printk 290 arch/alpha/kernel/sys_sio.c printk("AlphaBook1 NCR init: setting" printk 305 arch/alpha/kernel/sys_sio.c printk("AlphaBook1 VGA init: setting 1Mb memory\n"); printk 147 arch/alpha/kernel/sys_sx164.c printk("PCA56 MVI set enabled\n"); printk 233 arch/alpha/kernel/sys_takara.c printk(KERN_WARNING "takara_swizzle: can only " printk 238 arch/alpha/kernel/sys_takara.c printk(KERN_WARNING "takara_swizzle: cannot handle " printk 255 arch/alpha/kernel/sys_takara.c printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); printk 257 arch/alpha/kernel/sys_takara.c printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", printk 165 arch/alpha/kernel/sys_titan.c printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n"); printk 271 arch/alpha/kernel/sys_titan.c printk("titan_request_irq for IRQ %d returned %d; ignoring\n", printk 49 arch/alpha/kernel/sys_wildfire.c printk(KERN_ERR "wildfire_update_irq_hw:" printk 222 arch/alpha/kernel/time.c printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n", printk 230 arch/alpha/kernel/time.c printk("Turning on RTC interrupts.\n"); printk 429 arch/alpha/kernel/time.c printk("HWRPB cycle frequency bogus. " printk 435 arch/alpha/kernel/time.c printk("HWRPB cycle frequency bogus, " printk 62 arch/alpha/kernel/traps.c printk("opDEC fixup enabled.\n"); printk 68 arch/alpha/kernel/traps.c printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx %s\n", printk 70 arch/alpha/kernel/traps.c printk("pc is at %pSR\n", (void *)regs->pc); printk 71 arch/alpha/kernel/traps.c printk("ra is at %pSR\n", (void *)regs->r26); printk 72 arch/alpha/kernel/traps.c printk("v0 = %016lx t0 = %016lx t1 = %016lx\n", printk 74 arch/alpha/kernel/traps.c printk("t2 = %016lx t3 = %016lx t4 = %016lx\n", printk 76 arch/alpha/kernel/traps.c printk("t5 = %016lx t6 = %016lx t7 = %016lx\n", printk 80 arch/alpha/kernel/traps.c printk("s0 = %016lx s1 = %016lx s2 = %016lx\n", printk 82 arch/alpha/kernel/traps.c printk("s3 = %016lx s4 = %016lx s5 = %016lx\n", printk 84 arch/alpha/kernel/traps.c printk("s6 = %016lx\n", r9_15[15]); printk 87 arch/alpha/kernel/traps.c printk("a0 = %016lx a1 = %016lx a2 = %016lx\n", printk 89 arch/alpha/kernel/traps.c printk("a3 = %016lx a4 = %016lx a5 = %016lx\n", printk 91 arch/alpha/kernel/traps.c printk("t8 = %016lx t9 = %016lx t10= %016lx\n", printk 93 arch/alpha/kernel/traps.c printk("t11= %016lx pv = %016lx at = %016lx\n", printk 95 arch/alpha/kernel/traps.c printk("gp = %016lx sp = %p\n", regs->gp, regs+1); printk 113 arch/alpha/kernel/traps.c printk("Code:"); printk 118 arch/alpha/kernel/traps.c printk("%c%08x%c", i ? ' ' : '<', insn, i ? ' ' : '>'); printk 120 arch/alpha/kernel/traps.c printk("\n"); printk 127 arch/alpha/kernel/traps.c printk("Trace:\n"); printk 136 arch/alpha/kernel/traps.c printk("[<%lx>] %pSR\n", tmp, (void *)tmp); printk 138 arch/alpha/kernel/traps.c printk(" ..."); printk 142 arch/alpha/kernel/traps.c printk("\n"); printk 166 arch/alpha/kernel/traps.c printk(" "); printk 182 arch/alpha/kernel/traps.c printk("CPU %d ", hard_smp_processor_id()); printk 184 arch/alpha/kernel/traps.c printk("%s(%d): %s %ld\n", current->comm, task_pid_nr(current), str, err); printk 191 arch/alpha/kernel/traps.c printk("die_if_kernel recursion detected.\n"); printk 242 arch/alpha/kernel/traps.c printk("Kernel bug at %s:%d\n", printk 578 arch/alpha/kernel/traps.c printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n", printk 589 arch/alpha/kernel/traps.c printk("Forwarding unaligned exception at %lx (%lx)\n", printk 601 arch/alpha/kernel/traps.c printk("%s(%d): unhandled unaligned exception\n", printk 604 arch/alpha/kernel/traps.c printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx\n", printk 606 arch/alpha/kernel/traps.c printk("r0 = %016lx r1 = %016lx r2 = %016lx\n", printk 608 arch/alpha/kernel/traps.c printk("r3 = %016lx r4 = %016lx r5 = %016lx\n", printk 610 arch/alpha/kernel/traps.c printk("r6 = %016lx r7 = %016lx r8 = %016lx\n", printk 612 arch/alpha/kernel/traps.c printk("r9 = %016lx r10= %016lx r11= %016lx\n", printk 614 arch/alpha/kernel/traps.c printk("r12= %016lx r13= %016lx r14= %016lx\n", printk 616 arch/alpha/kernel/traps.c printk("r15= %016lx\n", una_reg(15)); printk 617 arch/alpha/kernel/traps.c printk("r16= %016lx r17= %016lx r18= %016lx\n", printk 619 arch/alpha/kernel/traps.c printk("r19= %016lx r20= %016lx r21= %016lx\n", printk 621 arch/alpha/kernel/traps.c printk("r22= %016lx r23= %016lx r24= %016lx\n", printk 623 arch/alpha/kernel/traps.c printk("r25= %016lx r27= %016lx r28= %016lx\n", printk 625 arch/alpha/kernel/traps.c printk("gp = %016lx sp = %p\n", regs->gp, regs+1); printk 631 arch/alpha/kernel/traps.c printk("die_if_kernel recursion detected.\n"); printk 737 arch/alpha/kernel/traps.c printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n", printk 55 arch/alpha/lib/stacktrace.c printk("Prologue [<%p>], Frame %p:\n", pro_pc, sp); printk 62 arch/alpha/lib/stacktrace.c printk("\t\t%s / 0x%016lx\n", reg_name[reg], value); printk 97 arch/alpha/lib/stacktrace.c printk("\tstack trace:\n"); printk 334 arch/alpha/math-emu/math.c printk(KERN_ERR "alpha_fp_emul: Invalid FP insn %#x at %#lx\n", printk 206 arch/alpha/mm/fault.c printk(KERN_ALERT "Unable to handle kernel paging request at " printk 28 arch/alpha/mm/numa.c #define DBGDCONT(args...) printk(args) printk 47 arch/alpha/mm/numa.c printk("Raw memory layout:\n"); printk 49 arch/alpha/mm/numa.c printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n", printk 94 arch/alpha/mm/numa.c printk("Initializing bootmem allocator on Node ID %d\n", nid); printk 96 arch/alpha/mm/numa.c printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n", printk 115 arch/alpha/mm/numa.c printk("setup: forcing memory size to %ldK (from %ldK).\n", printk 135 arch/alpha/mm/numa.c printk(" Detected node memory: start %8lu, end %8lu\n", printk 185 arch/alpha/mm/numa.c printk("Initial ramdisk at: 0x%p (%lu bytes)\n", printk 190 arch/alpha/mm/numa.c printk("initrd extends beyond end of memory " printk 179 arch/alpha/oprofile/common.c printk(KERN_INFO "oprofile: using %s performance monitoring.\n", printk 163 arch/arc/kernel/stacktrace.c printk(" %pS\n", (void *)address); printk 297 arch/arm/common/it8152.c printk(KERN_ERR "PCI: unable to allocate IO region\n"); printk 301 arch/arm/common/it8152.c printk(KERN_ERR "PCI: unable to allocate memory region\n"); printk 309 arch/arm/common/it8152.c printk(KERN_ERR "PCI: Can't use platform_notify\n"); printk 346 arch/arm/common/it8152.c printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", printk 447 arch/arm/common/locomo.c printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff)); printk 705 arch/arm/common/locomo.c printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); printk 733 arch/arm/common/locomo.c printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); printk 758 arch/arm/common/locomo.c printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); printk 850 arch/arm/common/sa1111.c printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); printk 201 arch/arm/common/scoop.c printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base); printk 101 arch/arm/kernel/atags_compat.c printk(KERN_DEBUG "Converting old-style param struct to taglist\n"); printk 51 arch/arm/kernel/bios32.c printk("(%s: %04X) ", pci_name(dev), status); printk 390 arch/arm/kernel/bios32.c printk("PCI: %s swizzling pin %d => pin %d slot %d\n", printk 408 arch/arm/kernel/bios32.c printk("PCI: %s mapping slot %d pin %d => irq %d\n", printk 87 arch/arm/kernel/machine_kexec.c printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n", printk 120 arch/arm/kernel/process.c printk("PC is at %pS\n", (void *)instruction_pointer(regs)); printk 121 arch/arm/kernel/process.c printk("LR is at %pS\n", (void *)regs->ARM_lr); printk 122 arch/arm/kernel/process.c printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n", printk 124 arch/arm/kernel/process.c printk("sp : %08lx ip : %08lx fp : %08lx\n", printk 126 arch/arm/kernel/process.c printk("r10: %08lx r9 : %08lx r8 : %08lx\n", printk 129 arch/arm/kernel/process.c printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", printk 132 arch/arm/kernel/process.c printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", printk 155 arch/arm/kernel/process.c printk("Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s\n", printk 162 arch/arm/kernel/process.c printk("xPSR: %08lx\n", regs->ARM_cpsr); printk 181 arch/arm/kernel/process.c printk("Control: %08x%s\n", ctrl, buf); printk 150 arch/arm/kernel/reboot.c printk("Reboot failed -- System halted\n"); printk 376 arch/arm/kernel/setup.c printk("%s", buf); printk 460 arch/arm/kernel/smp.c printk(KERN_INFO "SMP: Total of %d processors activated " printk 68 arch/arm/kernel/traps.c printk("[<%08lx>] (%ps) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from); printk 70 arch/arm/kernel/traps.c printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); printk 89 arch/arm/kernel/traps.c printk("%s\n", str); printk 94 arch/arm/kernel/traps.c printk("%s\n", str); printk 131 arch/arm/kernel/traps.c printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top); printk 149 arch/arm/kernel/traps.c printk("%s%04lx:%s\n", lvl, first & 0xffff, str); printk 184 arch/arm/kernel/traps.c printk("%sCode: %s\n", lvl, str); printk 212 arch/arm/kernel/traps.c printk("Backtrace: "); printk 258 arch/arm/lib/uaccess_with_memcpy.c printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); printk 267 arch/arm/lib/uaccess_with_memcpy.c printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); printk 99 arch/arm/mach-cns3xxx/core.c printk(KERN_INFO "powering system down...\n"); printk 191 arch/arm/mach-dove/pcie.c printk(KERN_INFO "Dove PCIe port %d: ", index); printk 200 arch/arm/mach-dove/pcie.c printk(KERN_INFO "link up\n"); printk 208 arch/arm/mach-dove/pcie.c printk(KERN_INFO "link down, ignoring\n"); printk 358 arch/arm/mach-exynos/platsmp.c printk(KERN_ERR "cpu1 power enable failed"); printk 37 arch/arm/mach-footbridge/cats-pci.c printk("PCI: device %02x:%02x has unknown irq line %x\n", printk 159 arch/arm/mach-footbridge/dc21285.c printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", printk 165 arch/arm/mach-footbridge/dc21285.c printk(KERN_DEBUG "PCI: target abort: "); printk 169 arch/arm/mach-footbridge/dc21285.c printk("\n"); printk 184 arch/arm/mach-footbridge/dc21285.c printk(KERN_DEBUG "PCI: system error received: "); printk 186 arch/arm/mach-footbridge/dc21285.c printk("\n"); printk 203 arch/arm/mach-footbridge/dc21285.c printk(KERN_DEBUG "PCI: discard timer expired\n"); printk 213 arch/arm/mach-footbridge/dc21285.c printk(KERN_DEBUG "PCI: data parity error detected: "); printk 215 arch/arm/mach-footbridge/dc21285.c printk("\n"); printk 228 arch/arm/mach-footbridge/dc21285.c printk(KERN_DEBUG "PCI: parity error detected: "); printk 230 arch/arm/mach-footbridge/dc21285.c printk("\n"); printk 254 arch/arm/mach-footbridge/dc21285.c printk("out of memory for root bus resources"); printk 304 arch/arm/mach-footbridge/dc21285.c printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in " printk 144 arch/arm/mach-footbridge/isa-irq.c printk(KERN_INFO "IRQ: ISA PIC not found\n"); printk 56 arch/arm/mach-footbridge/isa-rtc.c printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n"); printk 90 arch/arm/mach-footbridge/isa.c printk(KERN_ERR "Unable to register RTC device: %d\n", err); printk 94 arch/arm/mach-footbridge/isa.c printk(KERN_ERR "Unable to register serial device: %d\n", err); printk 402 arch/arm/mach-footbridge/netwinder-hw.c #define dprintk(x...) printk(x) printk 552 arch/arm/mach-footbridge/netwinder-hw.c printk("SoundBlaster: DSP reset failed\n"); printk 563 arch/arm/mach-footbridge/netwinder-hw.c printk("SoundBlaster: DSP not ready\n"); printk 580 arch/arm/mach-footbridge/netwinder-hw.c printk("SoundBlaster: could not turn speaker off\n"); printk 40 arch/arm/mach-footbridge/netwinder-pci.c printk(KERN_ERR "PCI: unknown device in slot %s\n", printk 221 arch/arm/mach-imx/avic.c printk(KERN_INFO "MXC IRQ initialized\n"); printk 90 arch/arm/mach-imx/iomux-imx31.c printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n", printk 96 arch/arm/mach-imx/iomux-imx31.c printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", printk 589 arch/arm/mach-imx/mach-mx31_3ds.c printk(KERN_WARNING "Init of the debug board failed, all " printk 212 arch/arm/mach-imx/mach-mx31ads.c printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); printk 561 arch/arm/mach-imx/mach-mx31moboard.c printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", printk 237 arch/arm/mach-imx/mach-pca100.c printk(KERN_ERR printk 349 arch/arm/mach-imx/mach-pca100.c printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); printk 218 arch/arm/mach-imx/mach-pcm043.c printk("failed to get GPIO_TXFS: %d\n", ret); printk 276 arch/arm/mach-imx/mach-pcm043.c printk("%s failed with %d\n", __func__, ret); printk 214 arch/arm/mach-imx/mach-qong.c printk(KERN_ERR "%s: failed to map registers, aborting.\n", printk 221 arch/arm/mach-imx/mach-qong.c printk(KERN_INFO "Qong FPGA version %d.%d.%d\n", printk 225 arch/arm/mach-imx/mach-qong.c printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based " printk 276 arch/arm/mach-imx/mach-vpr200.c printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n"); printk 281 arch/arm/mach-imx/mach-vpr200.c printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n"); printk 101 arch/arm/mach-imx/mm-imx3.c printk(KERN_ERR "remapping L2 cache area failed\n"); printk 166 arch/arm/mach-imx/mx31lilly-db.c printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); printk 224 arch/arm/mach-imx/mx31moboard-devboard.c printk(KERN_INFO "Initializing mx31devboard peripherals\n"); printk 248 arch/arm/mach-imx/mx31moboard-marxbot.c printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); printk 104 arch/arm/mach-imx/mx31moboard-smartbot.c printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); printk 119 arch/arm/mach-imx/mx31moboard-smartbot.c printk(KERN_WARNING "Unknown board %d, USB OTG not initialized", printk 189 arch/arm/mach-imx/pm-imx5.c printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode); printk 214 arch/arm/mach-integrator/impd1.c printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n"); printk 220 arch/arm/mach-integrator/impd1.c printk(KERN_ERR "IM-PD1: unable to map framebuffer\n"); printk 118 arch/arm/mach-iop32x/iq31244.c printk(KERN_ERR "ep80219_pci_map_irq() called for unknown " printk 153 arch/arm/mach-iop32x/iq31244.c printk(KERN_ERR "iq31244_pci_map_irq called for unknown " printk 176 arch/arm/mach-iop32x/iq31244.c printk("note: iq31244 board type has been selected\n"); printk 177 arch/arm/mach-iop32x/iq31244.c printk("note: to select ep80219 operation:\n"); printk 178 arch/arm/mach-iop32x/iq31244.c printk("\t1/ specify \"force_ep80219\" on the kernel" printk 180 arch/arm/mach-iop32x/iq31244.c printk("\t2/ update boot loader to pass" printk 89 arch/arm/mach-iop32x/iq80321.c printk(KERN_ERR "iq80321_pci_map_irq() called for unknown " printk 102 arch/arm/mach-iop32x/n2100.c printk(KERN_ERR "n2100_pci_map_irq() called for unknown " printk 27 arch/arm/mach-iop32x/pci.c #define DBG(x...) printk(x) printk 387 arch/arm/mach-iop32x/pci.c printk(KERN_DEBUG "\"%s\" malformed at " printk 328 arch/arm/mach-ixp4xx/common-pci.c printk("PCI: IXP42x A0 silicon detected - " printk 358 arch/arm/mach-ixp4xx/common-pci.c printk("PCI: IXP4xx is host\n"); printk 384 arch/arm/mach-ixp4xx/common-pci.c printk("PCI: IXP4xx is target - No bus scan performed\n"); printk 387 arch/arm/mach-ixp4xx/common-pci.c printk("PCI: IXP4xx Using %s access for memory space\n", printk 256 arch/arm/mach-ixp4xx/common.c printk("IXP4xx: Using %luMiB expansion bus window size\n", printk 245 arch/arm/mach-ixp4xx/dsmg600-setup.c printk(KERN_DEBUG "Reset Button IRQ %d not available\n", printk 52 arch/arm/mach-ixp4xx/fsg-pci.c printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", printk 184 arch/arm/mach-ixp4xx/fsg-setup.c printk(KERN_INFO "Restarting system.\n"); printk 222 arch/arm/mach-ixp4xx/fsg-setup.c printk(KERN_DEBUG "Reset Button IRQ %d not available\n", printk 229 arch/arm/mach-ixp4xx/fsg-setup.c printk(KERN_DEBUG "Power Button IRQ %d not available\n", printk 270 arch/arm/mach-ixp4xx/fsg-setup.c printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n", printk 272 arch/arm/mach-ixp4xx/fsg-setup.c printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n", printk 186 arch/arm/mach-ixp4xx/goramo_mlr.c printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", printk 358 arch/arm/mach-ixp4xx/goramo_mlr.c printk(KERN_ERR "goramo-mlr: unable to access system" printk 51 arch/arm/mach-ixp4xx/gtwx5715-pci.c printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", printk 306 arch/arm/mach-ixp4xx/nas100d-setup.c printk(KERN_DEBUG "Reset Button IRQ %d not available\n", printk 325 arch/arm/mach-ixp4xx/nas100d-setup.c printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n", printk 287 arch/arm/mach-ixp4xx/nslu2-setup.c printk(KERN_DEBUG "Reset Button IRQ %d not available\n", printk 294 arch/arm/mach-ixp4xx/nslu2-setup.c printk(KERN_DEBUG "Power Button IRQ %d not available\n", printk 313 arch/arm/mach-ixp4xx/nslu2-setup.c printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n", printk 115 arch/arm/mach-lpc32xx/common.c printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n", printk 184 arch/arm/mach-mmp/devices.c printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n", printk 144 arch/arm/mach-mmp/gplugd.c printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet " printk 166 arch/arm/mach-mmp/gplugd.c printk(KERN_ERR "Can't get hold of GPIO 35 to select display " printk 174 arch/arm/mach-mmp/gplugd.c printk(KERN_ERR "Can't get hold of GPIO 85 to select display " printk 164 arch/arm/mach-mmp/pm-mmp2.c printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__); printk 174 arch/arm/mach-mmp/pm-mmp2.c printk(KERN_INFO "%s: before suspend\n", __func__); printk 176 arch/arm/mach-mmp/pm-mmp2.c printk(KERN_INFO "%s: after suspend\n", __func__); printk 105 arch/arm/mach-mmp/pm-pxa910.c printk(KERN_ERR "Error: no defined wake up source irq: %d\n", printk 396 arch/arm/mach-mv78xx0/common.c printk(KERN_INFO "%s ", mv78xx0_id()); printk 397 arch/arm/mach-mv78xx0/common.c printk("core #%d, ", core_index); printk 398 arch/arm/mach-mv78xx0/common.c printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); printk 399 arch/arm/mach-mv78xx0/common.c printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); printk 400 arch/arm/mach-mv78xx0/common.c printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk 401 arch/arm/mach-mv78xx0/common.c printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); printk 28 arch/arm/mach-mv78xx0/mpp.c printk(KERN_ERR "MPP setup: unknown mv78x00 variant " printk 234 arch/arm/mach-mv78xx0/pcie.c printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min); printk 239 arch/arm/mach-mv78xx0/pcie.c printk("link up\n"); printk 248 arch/arm/mach-mv78xx0/pcie.c printk("link down, ignoring\n"); printk 310 arch/arm/mach-omap1/board-h2.c printk("Error requesting gpio 0 for smc91x irq\n"); printk 250 arch/arm/mach-omap1/board-h3.c printk("Error requesting gpio 40 for smc91x irq\n"); printk 486 arch/arm/mach-omap1/board-htcherald.c printk(KERN_INFO "htcherald_map_io done.\n"); printk 497 arch/arm/mach-omap1/board-htcherald.c printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n"); printk 534 arch/arm/mach-omap1/board-htcherald.c printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); printk 549 arch/arm/mach-omap1/board-htcherald.c printk(KERN_ERR "Unabled to request GPIO for USB\n"); printk 551 arch/arm/mach-omap1/board-htcherald.c printk(KERN_INFO "USB setup complete.\n"); printk 556 arch/arm/mach-omap1/board-htcherald.c printk(KERN_INFO "HTC Herald init.\n"); printk 283 arch/arm/mach-omap1/board-innovator.c printk("Error requesting gpio 0 for smc91x irq\n"); printk 93 arch/arm/mach-omap1/board-nokia770.c printk(KERN_INFO "shutdown LCD\n"); printk 260 arch/arm/mach-omap1/board-osk.c printk("Error requesting gpio 0 for smc91x irq\n"); printk 274 arch/arm/mach-omap1/board-osk.c printk("Error requesting gpio 62 for CF irq\n"); printk 525 arch/arm/mach-omap1/board-osk.c printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", printk 530 arch/arm/mach-omap1/board-osk.c printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); printk 196 arch/arm/mach-omap1/board-palmte.c printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); printk 203 arch/arm/mach-omap1/board-palmte.c printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); printk 214 arch/arm/mach-omap1/board-palmz71.c printk(KERN_INFO "PM: Power cable connected\n"); printk 218 arch/arm/mach-omap1/board-palmz71.c printk(KERN_INFO "PM: Power cable disconnected\n"); printk 245 arch/arm/mach-omap1/board-palmz71.c printk(KERN_ERR "Could not reserve WP GPIO!\n"); printk 252 arch/arm/mach-omap1/board-palmz71.c printk(KERN_ERR printk 259 arch/arm/mach-omap1/board-palmz71.c printk(KERN_ERR printk 455 arch/arm/mach-omap1/clock.c printk(KERN_ERR "clock.c: Enable for %s without enable code\n", printk 602 arch/arm/mach-omap1/clock.c printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); printk 604 arch/arm/mach-omap1/clock.c printk(" done\n"); printk 225 arch/arm/mach-omap1/dma.c printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); printk 228 arch/arm/mach-omap1/dma.c printk(KERN_INFO "OMAP DMA hardware version %d\n", printk 230 arch/arm/mach-omap1/dma.c printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", printk 137 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0)); printk 138 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n", printk 141 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n", printk 143 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n", printk 146 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0)); printk 147 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1)); printk 148 arch/arm/mach-omap1/id.c printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev); printk 197 arch/arm/mach-omap1/id.c printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type); printk 91 arch/arm/mach-omap1/lcd_dma.c printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); printk 102 arch/arm/mach-omap1/lcd_dma.c printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); printk 122 arch/arm/mach-omap1/lcd_dma.c printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); printk 287 arch/arm/mach-omap1/lcd_dma.c printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); printk 306 arch/arm/mach-omap1/lcd_dma.c printk(KERN_ERR "LCD DMA channel already reserved\n"); printk 333 arch/arm/mach-omap1/lcd_dma.c printk(KERN_ERR "LCD DMA is not reserved\n"); printk 392 arch/arm/mach-omap1/mcbsp.c printk(KERN_ERR "Could not register McBSP devices\n"); printk 409 arch/arm/mach-omap1/mux.c printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); printk 415 arch/arm/mach-omap1/mux.c printk("MUX: Setting register %s\n", cfg->name); printk 416 arch/arm/mach-omap1/mux.c printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", printk 421 arch/arm/mach-omap1/mux.c printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", printk 428 arch/arm/mach-omap1/mux.c printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", printk 446 arch/arm/mach-omap1/mux.c printk(KERN_ERR "Invalid pin table\n"); printk 463 arch/arm/mach-omap1/mux.c printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", printk 470 arch/arm/mach-omap1/mux.c printk(KERN_ERR "Pin mux table not initialized\n"); printk 475 arch/arm/mach-omap1/mux.c printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", printk 212 arch/arm/mach-omap1/pm.c printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n", printk 408 arch/arm/mach-omap1/pm.c printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n", printk 652 arch/arm/mach-omap1/pm.c printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); printk 685 arch/arm/mach-omap1/pm.c printk(KERN_ERR "sysfs_create_file failed: %d\n", error); printk 135 arch/arm/mach-omap1/serial.c printk(KERN_ERR "Could not ioremap uart%i\n", i); printk 142 arch/arm/mach-omap1/serial.c printk("Could not get uart1_ck\n"); printk 152 arch/arm/mach-omap1/serial.c printk("Could not get uart2_ck\n"); printk 164 arch/arm/mach-omap1/serial.c printk("Could not get uart3_ck\n"); printk 220 arch/arm/mach-omap1/serial.c printk(KERN_ERR "Could not request UART wake GPIO: %i\n", printk 229 arch/arm/mach-omap1/serial.c printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", printk 197 arch/arm/mach-omap1/time.c printk(err, "mpu_timer2"); printk 83 arch/arm/mach-omap1/usb.c printk("USB: hmc %d", config->hmc_mode); printk 346 arch/arm/mach-omap1/usb.c printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); printk 389 arch/arm/mach-omap1/usb.c printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", printk 455 arch/arm/mach-omap1/usb.c printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", printk 528 arch/arm/mach-omap1/usb.c printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", printk 558 arch/arm/mach-omap1/usb.c printk("USB: hmc %d", config->hmc_mode); printk 636 arch/arm/mach-omap1/usb.c printk(KERN_ERR "USB: No init for your chip yet\n"); printk 86 arch/arm/mach-omap2/board-n8x0.c printk(KERN_ERR "tusb: powerup failed\n"); printk 121 arch/arm/mach-omap2/board-n8x0.c printk(KERN_ERR "Could not get TUSB power GPIO%i\n", printk 133 arch/arm/mach-omap2/board-n8x0.c printk(announce); printk 117 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c printk(KERN_INFO "Could not set MPU rate to %luMHz\n", printk 116 arch/arm/mach-omap2/dma.c printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", printk 179 arch/arm/mach-omap2/id.c printk(KERN_ERR "Unknown OMAP CPU id\n"); printk 95 arch/arm/mach-omap2/pm-debug.c printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n", printk 252 arch/arm/mach-omap2/pm24xx.c printk(KERN_INFO "Power Management for OMAP2 initializing\n"); printk 254 arch/arm/mach-omap2/pm24xx.c printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); printk 287 arch/arm/mach-omap2/pm24xx.c printk(KERN_ERR "could not get osc_ck\n"); printk 294 arch/arm/mach-omap2/pm24xx.c printk(KERN_ERR "could not get emul_ck\n"); printk 115 arch/arm/mach-omap2/usb-tusb6010.c printk(error, "async", status); printk 120 arch/arm/mach-omap2/usb-tusb6010.c printk(error, "sync", status); printk 171 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 1, status); printk 186 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 2, status); printk 200 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 3, status); printk 207 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 4, status); printk 213 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 5, status); printk 219 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 6, status); printk 227 arch/arm/mach-omap2/usb-tusb6010.c printk(error, 7, status); printk 45 arch/arm/mach-orion5x/board-dt.c printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); printk 59 arch/arm/mach-orion5x/board-dt.c printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); printk 52 arch/arm/mach-orion5x/board-rd88f5182.c printk(KERN_ERR "rd88f5182_pci_preinit failed to " printk 57 arch/arm/mach-orion5x/board-rd88f5182.c printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); printk 65 arch/arm/mach-orion5x/board-rd88f5182.c printk(KERN_ERR "rd88f5182_pci_preinit failed to " printk 70 arch/arm/mach-orion5x/board-rd88f5182.c printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); printk 332 arch/arm/mach-orion5x/common.c printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); printk 347 arch/arm/mach-orion5x/common.c printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); printk 386 arch/arm/mach-orion5x/common.c printk(KERN_WARNING printk 189 arch/arm/mach-orion5x/db88f5281-setup.c printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n"); printk 217 arch/arm/mach-orion5x/db88f5281-setup.c printk(KERN_ERR "db88f5281_pci_preinit failed to " printk 222 arch/arm/mach-orion5x/db88f5281-setup.c printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); printk 230 arch/arm/mach-orion5x/db88f5281-setup.c printk(KERN_ERR "db88f5281_pci_preinit failed " printk 235 arch/arm/mach-orion5x/db88f5281-setup.c printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); printk 239 arch/arm/mach-orion5x/dns323-setup.c printk("DNS-323: Found ethernet MAC address: %pM\n", addr); printk 657 arch/arm/mach-orion5x/dns323-setup.c printk("DNS-323: Failed to read MAC address\n"); printk 243 arch/arm/mach-orion5x/kurobox_pro-setup.c printk(KERN_ERR ">%s: receive failed.\n", __func__); printk 261 arch/arm/mach-orion5x/kurobox_pro-setup.c printk(KERN_ERR ">%s: Checksum Error : " printk 278 arch/arm/mach-orion5x/kurobox_pro-setup.c printk(KERN_ERR ">%s: Error : NAK or Illegal Data " printk 35 arch/arm/mach-orion5x/mpp.c printk(KERN_ERR "MPP setup: unknown orion5x variant " printk 158 arch/arm/mach-orion5x/pci.c printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " printk 123 arch/arm/mach-orion5x/rd88f5182-setup.c printk(KERN_ERR "rd88f5182_pci_preinit failed to " printk 128 arch/arm/mach-orion5x/rd88f5182-setup.c printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); printk 136 arch/arm/mach-orion5x/rd88f5182-setup.c printk(KERN_ERR "rd88f5182_pci_preinit failed to " printk 141 arch/arm/mach-orion5x/rd88f5182-setup.c printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); printk 88 arch/arm/mach-orion5x/terastation_pro2-setup.c printk(KERN_ERR "tsp2_pci_preinit failed " printk 93 arch/arm/mach-orion5x/terastation_pro2-setup.c printk(KERN_ERR "tsp2_pci_preinit failed to " printk 218 arch/arm/mach-orion5x/terastation_pro2-setup.c printk(KERN_ERR ">%s: receive failed.\n", __func__); printk 236 arch/arm/mach-orion5x/terastation_pro2-setup.c printk(KERN_ERR ">%s: Checksum Error : " printk 253 arch/arm/mach-orion5x/terastation_pro2-setup.c printk(KERN_ERR ">%s: Error : NAK or Illegal Data " printk 117 arch/arm/mach-orion5x/ts209-setup.c printk(KERN_ERR "qnap_ts209_pci_preinit failed to " printk 122 arch/arm/mach-orion5x/ts209-setup.c printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " printk 131 arch/arm/mach-orion5x/ts209-setup.c printk(KERN_ERR "qnap_ts209_pci_preinit failed " printk 136 arch/arm/mach-orion5x/ts209-setup.c printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " printk 100 arch/arm/mach-orion5x/tsx09-common.c printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr); printk 292 arch/arm/mach-pxa/colibri-pxa270.c printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", printk 55 arch/arm/mach-pxa/colibri-pxa3xx.c printk(KERN_INFO "%s(): taking MAC from serial boot tag\n", printk 59 arch/arm/mach-pxa/colibri-pxa3xx.c printk(KERN_INFO "%s(): no valid serial boot tag found, " printk 1074 arch/arm/mach-pxa/devices.c printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n", printk 130 arch/arm/mach-pxa/himalaya.c printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n", printk 141 arch/arm/mach-pxa/himalaya.c printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n", printk 163 arch/arm/mach-pxa/idp.c printk("idp_init()\n"); printk 440 arch/arm/mach-pxa/lpd270.c printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str); printk 508 arch/arm/mach-pxa/lubbock.c printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n", printk 278 arch/arm/mach-pxa/mainstone.c printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret); printk 332 arch/arm/mach-pxa/mainstone.c printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); printk 342 arch/arm/mach-pxa/mainstone.c printk(KERN_DEBUG "%s: on\n", __func__); printk 346 arch/arm/mach-pxa/mainstone.c printk(KERN_DEBUG "%s: off\n", __func__); printk 574 arch/arm/mach-pxa/mainstone.c printk(KERN_NOTICE "Mainstone configured to boot from %s\n", printk 300 arch/arm/mach-pxa/mioa701.c printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n", printk 327 arch/arm/mach-pxa/mioa701.c printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n"); printk 330 arch/arm/mach-pxa/mioa701.c printk(KERN_ERR "Mioa701: gsm not available\n"); printk 510 arch/arm/mach-pxa/mioa701.c printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n", printk 520 arch/arm/mach-pxa/mioa701.c printk(KERN_CRIT "Unregistering mioa701 suspend will hang next" printk 83 arch/arm/mach-pxa/mp900.c printk(KERN_INFO "MobilePro 900/C machine init\n"); printk 368 arch/arm/mach-pxa/palmz72.c printk(KERN_ERR "Camera GPIO init failed!\n"); printk 335 arch/arm/mach-pxa/pcm990-baseboard.c printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC " printk 565 arch/arm/mach-pxa/pcm990-baseboard.c printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); printk 103 arch/arm/mach-pxa/pm.c printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n"); printk 146 arch/arm/mach-pxa/pxa3xx.c printk(KERN_ERR "Not suspending: no wakeup sources\n"); printk 175 arch/arm/mach-pxa/pxa3xx.c printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n"); printk 27 arch/arm/mach-pxa/reset.c printk(KERN_ERR "Can't request reset_gpio\n"); printk 36 arch/arm/mach-pxa/reset.c printk(KERN_ERR "Can't configure reset_gpio\n"); printk 512 arch/arm/mach-pxa/sharpsl_pm.c printk(KERN_WARNING "Not charging: temperature out of limits.\n"); printk 698 arch/arm/mach-pxa/stargate2.c printk(KERN_ERR "Can't get the gpio for SD power control"); printk 705 arch/arm/mach-pxa/stargate2.c printk(KERN_ERR "Can't get the sd detect gpio"); printk 716 arch/arm/mach-pxa/stargate2.c printk(KERN_ERR "can't request MMC card detect IRQ\n"); printk 805 arch/arm/mach-pxa/stargate2.c printk(KERN_ERR "Could not get gpio for bluetooth reset\n"); printk 266 arch/arm/mach-pxa/tosa.c printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); printk 336 arch/arm/mach-pxa/trizeps4.c printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" printk 290 arch/arm/mach-rpc/dma.c printk("floppydma: couldn't claim FIQ.\n"); printk 382 arch/arm/mach-rpc/dma.c printk("IOMDDMA%u: unable to register: %d\n", i, ret); printk 387 arch/arm/mach-rpc/dma.c printk("IOMDFLOPPY: unable to register: %d\n", ret); printk 390 arch/arm/mach-rpc/dma.c printk("IOMDSOUND: unable to register: %d\n", ret); printk 439 arch/arm/mach-rpc/ecard.c printk(KERN_ERR "ecard: rejecting request to " printk 475 arch/arm/mach-rpc/ecard.c printk(KERN_ERR "ecard: rejecting request to " printk 497 arch/arm/mach-rpc/ecard.c printk("Expansion card IRQ state:\n"); printk 509 arch/arm/mach-rpc/ecard.c printk(" %d: %sclaimed irq %spending\n", printk 513 arch/arm/mach-rpc/ecard.c printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n", printk 536 arch/arm/mach-rpc/ecard.c printk(KERN_ERR "\nInterrupt lockup detected - " printk 551 arch/arm/mach-rpc/ecard.c printk(KERN_WARNING "Unrecognised interrupt from backplane\n"); printk 999 arch/arm/mach-rpc/ecard.c printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n", printk 1005 arch/arm/mach-rpc/ecard.c printk("Probing expansion cards\n"); printk 117 arch/arm/mach-s3c24xx/bast-irq.c printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n"); printk 42 arch/arm/mach-s3c24xx/iotiming-s3c2410.c printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, " printk 376 arch/arm/mach-s3c24xx/iotiming-s3c2410.c printk(KERN_ERR "%s: cannot calculate bank %d io\n", printk 48 arch/arm/mach-s3c24xx/iotiming-s3c2412.c printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d" printk 152 arch/arm/mach-s3c24xx/iotiming-s3c2412.c printk(KERN_ERR "%s: cannot calculate bank %d io\n", printk 207 arch/arm/mach-s3c24xx/mach-amlm5900.c printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); printk 392 arch/arm/mach-s3c24xx/mach-anubis.c printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", printk 243 arch/arm/mach-s3c24xx/mach-jive.c printk(KERN_ERR "failed to parse mtdset=%s\n", options); printk 255 arch/arm/mach-s3c24xx/mach-jive.c printk(KERN_ERR "Unknown mtd set %ld specified," printk 358 arch/arm/mach-s3c24xx/mach-jive.c printk(KERN_DEBUG "%s(%d)\n", __func__, set); printk 537 arch/arm/mach-s3c24xx/mach-jive.c printk(KERN_INFO "powering system down...\n"); printk 62 arch/arm/mach-s3c24xx/mach-osiris-dvs.c printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, printk 367 arch/arm/mach-s3c24xx/mach-osiris.c printk(KERN_INFO "OSIRIS-B detected (revision %d)\n", printk 63 arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c printk(KERN_INFO "Using PLL table for 12MHz crystal\n"); printk 92 arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n"); printk 117 arch/arm/mach-s3c24xx/s3c2410.c printk("S3C2410: Initialising architecture\n"); printk 169 arch/arm/mach-s3c24xx/s3c2412.c printk("S3C2412: Initialising architecture\n"); printk 71 arch/arm/mach-s3c24xx/s3c2416.c printk(KERN_INFO "S3C2416: Initializing architecture\n"); printk 46 arch/arm/mach-s3c24xx/s3c2440.c printk("S3C2440: Initialising architecture\n"); printk 46 arch/arm/mach-s3c24xx/s3c2442.c printk("S3C2442: Initialising architecture\n"); printk 62 arch/arm/mach-s3c24xx/s3c2443.c printk("S3C2443: Initialising architecture\n"); printk 35 arch/arm/mach-s3c24xx/simtec-nor.c printk(KERN_DEBUG "%s(%d)\n", __func__, vpp); printk 71 arch/arm/mach-s3c24xx/simtec-nor.c printk(KERN_ERR "failed to register physmap-flash device\n"); printk 51 arch/arm/mach-s3c24xx/simtec-pm.c printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n"); printk 80 arch/arm/mach-s3c24xx/simtec-usb.c printk(KERN_ERR "failed to request usb oc irq\n"); printk 104 arch/arm/mach-s3c24xx/simtec-usb.c printk("USB Power Control, Copyright 2004 Simtec Electronics\n"); printk 239 arch/arm/mach-s3c64xx/common.c printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); printk 298 arch/arm/mach-s3c64xx/common.c printk(KERN_WARNING "No edge setting!\n"); printk 322 arch/arm/mach-s3c64xx/common.c printk(KERN_ERR "No such irq type %d", type); printk 40 arch/arm/mach-s3c64xx/dev-audio.c printk(KERN_DEBUG "Invalid I2S Controller number: %d\n", printk 125 arch/arm/mach-s3c64xx/dev-audio.c printk(KERN_DEBUG "Invalid PCM Controller number: %d\n", printk 34 arch/arm/mach-s3c64xx/dev-backlight.c printk(KERN_ERR "failed to request GPIO for LCD Backlight\n"); printk 130 arch/arm/mach-s3c64xx/dev-backlight.c printk(KERN_ERR "failed to register backlight device: %d\n", ret); printk 295 arch/arm/mach-s3c64xx/mach-mini6410.c printk(KERN_INFO "MINI6410: '%c' ignored, " printk 300 arch/arm/mach-s3c64xx/mach-mini6410.c printk(KERN_INFO "MINI6410: '%c' out " printk 317 arch/arm/mach-s3c64xx/mach-mini6410.c printk(KERN_INFO "MINI6410: Option string mini6410=%s\n", printk 323 arch/arm/mach-s3c64xx/mach-mini6410.c printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n", printk 265 arch/arm/mach-s3c64xx/mach-real6410.c printk(KERN_INFO "REAL6410: '%c' ignored, " printk 270 arch/arm/mach-s3c64xx/mach-real6410.c printk(KERN_INFO "REAL6410: '%c' out " printk 287 arch/arm/mach-s3c64xx/mach-real6410.c printk(KERN_INFO "REAL6410: Option string real6410=%s\n", printk 293 arch/arm/mach-s3c64xx/mach-real6410.c printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n", printk 89 arch/arm/mach-s3c64xx/s3c6400.c printk("S3C6400: Initialising architecture\n"); printk 92 arch/arm/mach-s3c64xx/s3c6410.c printk("S3C6410: Initialising architecture\n"); printk 163 arch/arm/mach-sa1100/assabet.c printk(KERN_WARNING "No ACK from ADV7171\n"); printk 183 arch/arm/mach-sa1100/assabet.c printk(KERN_WARNING "Something dragging SDA down?\n"); printk 584 arch/arm/mach-sa1100/assabet.c printk( "Warning: Neponset detected but full support " printk 676 arch/arm/mach-sa1100/assabet.c printk("Neponset expansion board detected\n"); printk 215 arch/arm/mach-sa1100/badge4.c printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n", printk 242 arch/arm/mach-sa1100/badge4.c printk(KERN_ERR printk 278 arch/arm/mach-sa1100/badge4.c printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__); printk 282 arch/arm/mach-sa1100/badge4.c printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__); printk 391 arch/arm/mach-sa1100/collie.c printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); printk 116 arch/arm/mach-sa1100/generic.c printk(KERN_ERR "Unable to register device %s: %d\n", printk 63 arch/arm/mach-sa1100/jornada720_ssp.c printk(KERN_WARNING "SSP: timeout while waiting for transmit\n"); printk 140 arch/arm/mach-sa1100/jornada720_ssp.c printk(KERN_INFO "SSP: device initialized with irq\n"); printk 144 arch/arm/mach-sa1100/jornada720_ssp.c printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n"); printk 168 arch/arm/mach-sa1100/jornada720_ssp.c printk(KERN_WARNING "SSP: attempts failed, bailing\n"); printk 174 arch/arm/mach-sa1100/jornada720_ssp.c printk(KERN_INFO "SSP: device initialized\n"); printk 132 arch/arm/mach-sa1100/pci-nanoengine.c printk(KERN_ERR "PCI: unable to allocate io port region\n"); printk 137 arch/arm/mach-sa1100/pci-nanoengine.c printk(KERN_ERR "PCI: unable to allocate non prefetchable\n"); printk 143 arch/arm/mach-sa1100/pci-nanoengine.c printk(KERN_ERR "PCI: unable to allocate prefetchable\n"); printk 393 arch/arm/mach-sa1100/simpad.c printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device"); printk 406 arch/arm/mach-sa1100/simpad.c printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device"); printk 30 arch/arm/mach-sa1100/ssp.c printk(KERN_WARNING "SSP: receiver overrun\n"); printk 289 arch/arm/mach-u300/core.c printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ printk 293 arch/arm/mach-u300/core.c printk(KERN_ERR "Platform configured for BS335 " \ printk 967 arch/arm/mm/alignment.c printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*x " printk 41 arch/arm/mm/fault.c printk("%spgd = %p\n", lvl, mm->pgd); printk 43 arch/arm/mm/fault.c printk("%s[%08lx] *pgd=%08llx", lvl, addr, (long long)pgd_val(*pgd)); printk 77 arch/arm/nwfpe/fpa11.c printk("NWFPE: setting up state.\n"); printk 90 arch/arm/nwfpe/fpa11.c printk("NWFPE: emulating opcode %08x\n", opcode); printk 137 arch/arm/nwfpe/fpmodule.c printk(KERN_DEBUG printk 140 arch/arm/plat-omap/dma.c #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ printk 478 arch/arm/plat-omap/dma.c printk(KERN_ERR "Invalid DMA burst mode\n"); printk 730 arch/arm/plat-omap/dma.c printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); printk 763 arch/arm/plat-omap/dma.c printk(KERN_ERR "Invalid channel id\n"); printk 940 arch/arm/plat-omap/dma.c printk(KERN_ERR "DMA callback for not set for free channel\n"); printk 1064 arch/arm/plat-omap/dma.c printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); printk 1161 arch/arm/plat-omap/dma.c printk(KERN_INFO "DMA transaction error with device %d\n", printk 1173 arch/arm/plat-omap/dma.c printk(KERN_INFO "DMA secure error with device %d\n", printk 1176 arch/arm/plat-omap/dma.c printk(KERN_INFO "DMA misaligned error with device %d\n", printk 1217 arch/arm/plat-omap/dma.c printk(KERN_WARNING "Spurious DMA IRQ\n"); printk 34 arch/arm/plat-orion/mpp.c printk(KERN_DEBUG "initial MPP regs:"); printk 36 arch/arm/plat-orion/mpp.c printk(KERN_ERR "orion_mpp_conf: invalid mpp_max\n"); printk 42 arch/arm/plat-orion/mpp.c printk(" %08x", mpp_ctrl[i]); printk 44 arch/arm/plat-orion/mpp.c printk("\n"); printk 52 arch/arm/plat-orion/mpp.c printk(KERN_ERR "orion_mpp_conf: invalid MPP " printk 57 arch/arm/plat-orion/mpp.c printk(KERN_WARNING printk 76 arch/arm/plat-orion/mpp.c printk(KERN_DEBUG " final MPP regs:"); printk 79 arch/arm/plat-orion/mpp.c printk(" %08x", mpp_ctrl[i]); printk 81 arch/arm/plat-orion/mpp.c printk("\n"); printk 152 arch/arm/plat-samsung/adc.c printk(KERN_ERR "%s: failed to find adc\n", __func__); printk 509 arch/arm/plat-samsung/adc.c printk(KERN_ERR "%s: failed to add adc driver\n", __func__); printk 641 arch/arm/plat-samsung/devs.c printk(KERN_ERR "no memory for LCD display data\n"); printk 643 arch/arm/plat-samsung/devs.c printk(KERN_ERR "no memory for LCD platform data\n"); printk 726 arch/arm/plat-samsung/devs.c printk(KERN_ERR "%s: no memory for sets\n", __func__); printk 733 arch/arm/plat-samsung/devs.c printk(KERN_ERR "%s: failed to copy set %d\n", printk 257 arch/arm/plat-samsung/include/plat/cpu-freq-core.h #define s3c_freq_dbg(x...) printk(KERN_INFO x) printk 259 arch/arm/plat-samsung/include/plat/cpu-freq-core.h #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) printk 263 arch/arm/plat-samsung/include/plat/cpu-freq-core.h #define s3c_freq_iodbg(x...) printk(KERN_INFO x) printk 265 arch/arm/plat-samsung/include/plat/cpu-freq-core.h #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) printk 49 arch/arm/plat-samsung/init.c printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); printk 53 arch/arm/plat-samsung/init.c printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); printk 56 arch/arm/plat-samsung/init.c printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); printk 140 arch/arm/plat-samsung/init.c printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); printk 22 arch/arm/plat-samsung/platformdata.c printk(KERN_ERR "%s: no platform data supplied\n", pdev->name); printk 101 arch/arm/plat-samsung/pm-check.c printk(KERN_ERR "Cannot allocated CRC save area\n"); printk 194 arch/arm/plat-samsung/pm-check.c printk(KERN_ERR "Restore CRC error at " printk 48 arch/arm/plat-samsung/pm.c printk(KERN_INFO "wake %s for irq %d\n", printk 79 arch/arm/plat-samsung/pm.c printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__); printk 91 arch/arm/plat-samsung/pm.c printk(KERN_ERR "%s: No wake-up sources!\n", __func__); printk 92 arch/arm/plat-samsung/pm.c printk(KERN_ERR "%s: Aborting sleep\n", __func__); printk 195 arch/arm/plat-samsung/pm.c printk("S3C Power Management, Copyright 2004 Simtec Electronics\n"); printk 40 arch/arm/plat-samsung/wakeup-mask.c printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val); printk 208 arch/arm64/kernel/process.c printk("Reboot failed -- System halted\n"); printk 217 arch/arm64/kernel/process.c printk("pstate: %08llx (%c%c%c%c %c %s %s %c%c%c)\n", printk 230 arch/arm64/kernel/process.c printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO)\n", printk 264 arch/arm64/kernel/process.c printk("pc : %pS\n", (void *)regs->pc); printk 265 arch/arm64/kernel/process.c printk("lr : %pS\n", (void *)lr); printk 267 arch/arm64/kernel/process.c printk("pc : %016llx\n", regs->pc); printk 268 arch/arm64/kernel/process.c printk("lr : %016llx\n", lr); printk 271 arch/arm64/kernel/process.c printk("sp : %016llx\n", sp); printk 274 arch/arm64/kernel/process.c printk("pmr_save: %08llx\n", regs->pmr_save); printk 279 arch/arm64/kernel/process.c printk("x%-2d: %016llx ", i, regs->regs[i]); printk 57 arch/arm64/kernel/traps.c printk(" %pS\n", (void *)where); printk 82 arch/arm64/kernel/traps.c printk("%sCode: %s\n", lvl, str); printk 117 arch/arm64/kernel/traps.c printk("Call trace:\n"); printk 108 arch/c6x/kernel/irq.c printk(KERN_INFO "Core interrupt controller initialized\n"); printk 119 arch/c6x/kernel/irq.c printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); printk 52 arch/c6x/kernel/process.c printk(KERN_EMERG "System Halted, OK to turn off power\n"); printk 102 arch/c6x/kernel/setup.c printk(KERN_WARNING printk 200 arch/c6x/kernel/setup.c printk(KERN_INFO "CPU%d: %s rev %s, %s volts, %uMHz\n", printk 292 arch/c6x/kernel/setup.c printk(KERN_INFO "Initializing kernel\n"); printk 327 arch/c6x/kernel/setup.c printk(KERN_INFO "Memory Start=%08lx, Memory End=%08lx\n", printk 61 arch/c6x/mm/dma-coherent.c printk(KERN_ERR "%s: freeing outside range.\n", __func__); printk 123 arch/c6x/mm/dma-coherent.c printk(KERN_INFO printk 290 arch/c6x/platforms/dscr.c printk(KERN_INFO "DEVSTAT: %08x\n", c6x_devstat); printk 100 arch/h8300/kernel/process.c printk("USP: %08lx\n", rdusp()); printk 102 arch/h8300/kernel/process.c printk("\n"); printk 52 arch/h8300/mm/fault.c printk(" at virtual address %08lx\n", address); printk 99 arch/hexagon/include/asm/pgtable.h printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__,\ printk 15 arch/hexagon/kernel/module.c #define DEBUGP printk printk 48 arch/hexagon/kernel/module.c printk(KERN_WARNING printk 105 arch/hexagon/kernel/module.c printk(KERN_ERR printk 138 arch/hexagon/kernel/module.c printk(KERN_ERR "%s: GOT/PLT relocations unsupported\n", printk 142 arch/hexagon/kernel/module.c printk(KERN_ERR "%s: unknown relocation: %u\n", printk 56 arch/hexagon/kernel/setup.c printk(KERN_INFO "PHYS_OFFSET=0x%08lx\n", PHYS_OFFSET); printk 109 arch/hexagon/kernel/smp.c printk(KERN_ERR "interrupt %ld not configured?\n", printk 163 arch/hexagon/kernel/smp.c printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu); printk 96 arch/hexagon/kernel/traps.c printk(KERN_INFO "CPU#%d, %s/%d, Call Trace:\n", printk 111 arch/hexagon/kernel/traps.c printk(KERN_INFO "-- Corrupt frame pointer %p\n", fp); printk 128 arch/hexagon/kernel/traps.c printk(KERN_INFO "[%p] 0x%lx: %s + 0x%lx", fp, ip, name, printk 131 arch/hexagon/kernel/traps.c printk(KERN_CONT " (FP out of bounds!)"); printk 133 arch/hexagon/kernel/traps.c printk(KERN_CONT " [%s] ", modname); printk 134 arch/hexagon/kernel/traps.c printk(KERN_CONT "\n"); printk 139 arch/hexagon/kernel/traps.c printk(KERN_INFO "-- Corrupt frame pointer %p\n", printk 150 arch/hexagon/kernel/traps.c printk(KERN_INFO "-- trap0 -- syscall_nr: %ld", printk 152 arch/hexagon/kernel/traps.c printk(KERN_CONT " psp: %lx elr: %lx\n", printk 158 arch/hexagon/kernel/traps.c printk(KERN_INFO "-- %s (0x%lx) badva: %lx\n", printk 202 arch/hexagon/kernel/traps.c printk(KERN_EMERG "Oops: %s[#%d]:\n", str, ++die.counter); printk 344 arch/hexagon/kernel/traps.c printk(KERN_ERR "sys_syscall invoked!\n"); printk 26 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "restart_r0: \t0x%08lx syscall_nr: %ld\n", printk 28 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "preds: \t\t0x%08lx\n", regs->preds); printk 29 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "lc0: \t0x%08lx sa0: 0x%08lx m0: 0x%08lx\n", printk 31 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "lc1: \t0x%08lx sa1: 0x%08lx m1: 0x%08lx\n", printk 33 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "gp: \t0x%08lx ugp: 0x%08lx usr: 0x%08lx\n", printk 35 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "cs0: \t0x%08lx cs1: 0x%08lx\n", printk 37 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r0: \t0x%08lx %08lx %08lx %08lx\n", regs->r00, printk 41 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r4: \t0x%08lx %08lx %08lx %08lx\n", regs->r04, printk 45 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r8: \t0x%08lx %08lx %08lx %08lx\n", regs->r08, printk 49 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r12: \t0x%08lx %08lx %08lx %08lx\n", regs->r12, printk 53 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r16: \t0x%08lx %08lx %08lx %08lx\n", regs->r16, printk 57 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r20: \t0x%08lx %08lx %08lx %08lx\n", regs->r20, printk 61 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r24: \t0x%08lx %08lx %08lx %08lx\n", regs->r24, printk 65 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "r28: \t0x%08lx %08lx %08lx %08lx\n", regs->r28, printk 70 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "elr: \t0x%08lx cause: 0x%08lx user_mode: %d\n", printk 72 arch/hexagon/kernel/vm_events.c printk(KERN_EMERG "psp: \t0x%08lx badva: 0x%08lx int_enabled: %d\n", printk 79 arch/hexagon/kernel/vm_events.c printk(KERN_ERR "Unimplemented handler; ELR=0x%08x\n", elr); printk 175 arch/hexagon/mm/init.c printk(KERN_INFO "bootmem_startpg: 0x%08lx\n", bootmem_startpg); printk 176 arch/hexagon/mm/init.c printk(KERN_INFO "bootmem_lastpg: 0x%08lx\n", bootmem_lastpg); printk 177 arch/hexagon/mm/init.c printk(KERN_INFO "min_low_pfn: 0x%08lx\n", min_low_pfn); printk 178 arch/hexagon/mm/init.c printk(KERN_INFO "max_low_pfn: 0x%08lx\n", max_low_pfn); printk 208 arch/hexagon/mm/init.c printk(KERN_INFO "clearing segtable from %p to %p\n", segtable, printk 214 arch/hexagon/mm/init.c printk(KERN_INFO "segtable = %p (should be equal to _K_io_map)\n", printk 219 arch/hexagon/mm/init.c printk(KERN_INFO "&_K_init_devicetable = 0x%08x\n", printk 223 arch/hexagon/mm/init.c printk(KERN_INFO "*segtable = 0x%08x\n", *segtable); printk 230 arch/hexagon/mm/init.c printk(KERN_INFO "PAGE_SIZE=%lu\n", PAGE_SIZE); printk 159 arch/hexagon/mm/vm_fault.c printk(KERN_EMERG "Unable to handle kernel paging request at " printk 156 arch/ia64/hp/common/aml_nfw.c printk(KERN_INFO "Global 0x%02X opregion handler registered\n", printk 174 arch/ia64/hp/common/aml_nfw.c printk(KERN_INFO "Global 0x%02X opregion handler removed\n", printk 110 arch/ia64/hp/common/sba_iommu.c #define DBG_INIT(x...) printk(x) printk 116 arch/ia64/hp/common/sba_iommu.c #define DBG_RUN(x...) printk(x) printk 122 arch/ia64/hp/common/sba_iommu.c #define DBG_RUN_SG(x...) printk(x) printk 129 arch/ia64/hp/common/sba_iommu.c #define DBG_RES(x...) printk(x) printk 135 arch/ia64/hp/common/sba_iommu.c #define DBG_BYPASS(x...) printk(x) printk 143 arch/ia64/hp/common/sba_iommu.c printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \ printk 316 arch/ia64/hp/common/sba_iommu.c printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n", printk 321 arch/ia64/hp/common/sba_iommu.c printk(KERN_DEBUG "%s %2d %p %016Lx\n", printk 328 arch/ia64/hp/common/sba_iommu.c printk(KERN_DEBUG "%s", msg); printk 390 arch/ia64/hp/common/sba_iommu.c printk(KERN_DEBUG " %d : DMA %08lx/%05x CPU %p\n", nents, printk 673 arch/ia64/hp/common/sba_iommu.c printk(KERN_WARNING "%s: I/O MMU @ %p is" printk 680 arch/ia64/hp/common/sba_iommu.c printk(KERN_WARNING "%s: I/O MMU @ %p is" printk 1214 arch/ia64/hp/common/sba_iommu.c printk(" %2d : %08lx/%05x %p\n", printk 1636 arch/ia64/hp/common/sba_iommu.c printk(KERN_INFO PFX "reserving %dMb of IOVA space at 0x%lx for agpgart\n", printk 1823 arch/ia64/hp/common/sba_iommu.c printk(KERN_INFO PFX printk 1963 arch/ia64/hp/common/sba_iommu.c printk(KERN_WARNING "No IOC for PCI Bus %04x:%02x in ACPI\n", pci_domain_nr(bus), bus->number); printk 2139 arch/ia64/hp/common/sba_iommu.c printk("%s: unknown/unsupported iommu page size %ld\n", printk 8 arch/ia64/include/asm/bug.h printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ printk 12 arch/ia64/include/asm/cyclone.h printk(KERN_ERR "Cyclone Counter: System not configured" printk 183 arch/ia64/include/asm/pgtable.h #define pgd_ERROR(e) printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 185 arch/ia64/include/asm/pgtable.h #define pud_ERROR(e) printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e)) printk 187 arch/ia64/include/asm/pgtable.h #define pmd_ERROR(e) printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) printk 188 arch/ia64/include/asm/pgtable.h #define pte_ERROR(e) printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) printk 142 arch/ia64/include/uapi/asm/cmpxchg.h extern int printk(const char *fmt, ...); \ printk 144 arch/ia64/include/uapi/asm/cmpxchg.h printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));\ printk 68 arch/ia64/kernel/acpi.c printk(KERN_ERR printk 311 arch/ia64/kernel/acpi.c printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); printk 366 arch/ia64/kernel/acpi.c printk(KERN_ERR printk 484 arch/ia64/kernel/acpi.c printk(KERN_INFO "Number of logical nodes in system = %d\n", printk 486 arch/ia64/kernel/acpi.c printk(KERN_INFO "Number of memory chunks in system = %d\n", printk 512 arch/ia64/kernel/acpi.c printk("ACPI 2.0 SLIT locality table:\n"); printk 515 arch/ia64/kernel/acpi.c printk("%03d ", node_distance(i, j)); printk 516 arch/ia64/kernel/acpi.c printk("\n"); printk 581 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Can't find MADT\n"); printk 588 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX printk 595 arch/ia64/kernel/acpi.c printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); printk 596 arch/ia64/kernel/acpi.c printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); printk 604 arch/ia64/kernel/acpi.c printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, printk 622 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Can't find MADT\n"); printk 630 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX printk 635 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); printk 641 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX printk 650 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX printk 655 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX printk 659 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); printk 669 arch/ia64/kernel/acpi.c printk(KERN_ERR PREFIX "Can't find FADT\n"); printk 776 arch/ia64/kernel/acpi.c printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", printk 198 arch/ia64/kernel/brl_emu.c printk(KERN_DEBUG "Woah! Unimplemented Instruction Address Trap!\n"); printk 49 arch/ia64/kernel/cyclone.c printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); printk 55 arch/ia64/kernel/cyclone.c printk(KERN_ERR "Summit chipset: Could not find valid CBAR" printk 63 arch/ia64/kernel/cyclone.c printk(KERN_ERR "Summit chipset: Could not find valid CBAR" printk 73 arch/ia64/kernel/cyclone.c printk(KERN_ERR "Summit chipset: Could not find valid PMCC" printk 85 arch/ia64/kernel/cyclone.c printk(KERN_ERR "Summit chipset: Could not find valid MPCS" printk 97 arch/ia64/kernel/cyclone.c printk(KERN_ERR "Summit chipset: Could not find valid MPMC" printk 109 arch/ia64/kernel/cyclone.c printk(KERN_ERR "Summit chipset: Counter not counting!" printk 370 arch/ia64/kernel/efi.c printk(KERN_ERR "Too many EFI Pal Code memory ranges, " printk 395 arch/ia64/kernel/efi.c printk(KERN_INFO "%s: no need to install ITR for PAL code\n", printk 406 arch/ia64/kernel/efi.c printk(KERN_INFO "CPU %d: mapping PAL code " printk 414 arch/ia64/kernel/efi.c printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n", printk 441 arch/ia64/kernel/efi.c printk(KERN_INFO "PALO signature incorrect.\n"); printk 447 arch/ia64/kernel/efi.c printk(KERN_INFO "PALO checksum incorrect.\n"); printk 505 arch/ia64/kernel/efi.c printk(KERN_INFO "Ignoring memory below %lluMB\n", printk 508 arch/ia64/kernel/efi.c printk(KERN_INFO "Ignoring memory above %lluMB\n", printk 521 arch/ia64/kernel/efi.c printk(KERN_WARNING "Warning: EFI system table version " printk 534 arch/ia64/kernel/efi.c printk(KERN_INFO "EFI v%u.%.02u by %s:", printk 591 arch/ia64/kernel/efi.c printk("mem%02d: %s " printk 637 arch/ia64/kernel/efi.c printk(KERN_INFO "EFI_MEMORY_WC mapping\n"); printk 650 arch/ia64/kernel/efi.c printk(KERN_INFO "EFI_MEMORY_WT mapping\n"); printk 663 arch/ia64/kernel/efi.c printk(KERN_WARNING "warning: unable to switch EFI into " printk 943 arch/ia64/kernel/efi.c printk(KERN_ERR "No EFI %s variable?\n", name); printk 963 arch/ia64/kernel/efi.c printk(KERN_ERR "Malformed %s value\n", name); printk 1247 arch/ia64/kernel/efi.c printk(KERN_ERR printk 1319 arch/ia64/kernel/efi.c printk(KERN_WARNING printk 1349 arch/ia64/kernel/efi.c printk(KERN_WARNING "Cannot locate EFI vmcore descriptor\n"); printk 88 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "pal_mc_err_inject for cpu%d:\n", cpu); printk 89 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "err_type_info=%lx,\n", err_type_info[cpu]); printk 90 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "err_struct_info=%lx,\n", err_struct_info[cpu]); printk 91 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "err_data_buffer=%lx, %lx, %lx.\n", printk 119 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "Returns: status=%d,\n", (int)status[cpu]); printk 120 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "capabilities=%lx,\n", capabilities[cpu]); printk 121 arch/ia64/kernel/err_inject.c printk(KERN_DEBUG "resources=%lx\n", resources[cpu]); printk 148 arch/ia64/kernel/err_inject.c printk("Virtual address %lx is not existing.\n",virt_addr); printk 181 arch/ia64/kernel/err_inject.c printk("write err_data_buffer=[%lx,%lx,%lx] on cpu%d\n", printk 248 arch/ia64/kernel/err_inject.c printk(KERN_INFO "Enter error injection driver.\n"); printk 263 arch/ia64/kernel/err_inject.c printk(KERN_INFO "Exit error injection driver.\n"); printk 74 arch/ia64/kernel/esi.c printk(KERN_ERR "bad signature in ESI system table!"); printk 88 arch/ia64/kernel/esi.c printk(KERN_WARNING "Unknown table type %d found in " printk 102 arch/ia64/kernel/iosapic.c #define DBG(fmt...) printk(fmt) printk 522 arch/ia64/kernel/iosapic.c printk(KERN_INFO "Reassigning vector %d to %d\n", printk 560 arch/ia64/kernel/iosapic.c printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", printk 569 arch/ia64/kernel/iosapic.c printk(KERN_WARNING "%s: cannot allocate memory\n", printk 585 arch/ia64/kernel/iosapic.c printk (KERN_WARNING printk 604 arch/ia64/kernel/iosapic.c printk(KERN_WARNING printk 768 arch/ia64/kernel/iosapic.c printk(KERN_INFO "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d\n", printk 796 arch/ia64/kernel/iosapic.c printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", printk 804 arch/ia64/kernel/iosapic.c printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", printk 827 arch/ia64/kernel/iosapic.c printk(KERN_INFO printk 890 arch/ia64/kernel/iosapic.c printk(KERN_ERR "%s: invalid int type 0x%x\n", __func__, printk 897 arch/ia64/kernel/iosapic.c printk(KERN_INFO printk 940 arch/ia64/kernel/iosapic.c printk(KERN_INFO printk 975 arch/ia64/kernel/iosapic.c printk(KERN_WARNING "%s: failed to allocate iosapic\n", __func__); printk 1093 arch/ia64/kernel/iosapic.c printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n", printk 1100 arch/ia64/kernel/iosapic.c printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n", printk 1129 arch/ia64/kernel/iosapic.c printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", printk 35 arch/ia64/kernel/irq.c printk(KERN_ERR "Unexpected irq vector 0x%x on CPU %u!\n", irq, smp_processor_id()); printk 141 arch/ia64/kernel/irq.c printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id); printk 461 arch/ia64/kernel/irq_ia64.c printk("ia64_handle_irq: DANGER: less than " printk 491 arch/ia64/kernel/irq_ia64.c printk(KERN_ERR "%s: Unexpected interrupt " printk 557 arch/ia64/kernel/irq_ia64.c printk(KERN_ERR "%s: Unexpected interrupt " printk 184 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes on cmp unc " printk 199 arch/ia64/kernel/kprobes.c printk(KERN_WARNING printk 209 arch/ia64/kernel/kprobes.c printk(KERN_WARNING printk 223 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes on test bit " printk 234 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes on IP-Relative" printk 244 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes on " printk 258 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes on fcmp/fclass " printk 270 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes on float Approx " printk 358 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Attempting to insert unaligned kprobe " printk 364 arch/ia64/kernel/kprobes.c printk(KERN_WARNING "Kprobes can't be inserted inside " printk 109 arch/ia64/kernel/mca.c # define IA64_MCA_DEBUG(fmt...) printk(fmt) printk 220 arch/ia64/kernel/mca.c printk("%s", temp_buf); printk 271 arch/ia64/kernel/mca.c printk("%s", temp_buf); printk 292 arch/ia64/kernel/mca.c printk(KERN_EMERG "mlogbuf_finish: printing switched to urgent mode, " printk 299 arch/ia64/kernel/mca.c printk("Delaying for 5 seconds...\n"); printk 315 arch/ia64/kernel/mca.c printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT " printk 322 arch/ia64/kernel/mca.c printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT. " printk 325 arch/ia64/kernel/mca.c printk(KERN_ERR "INIT: If messages would not printed after " printk 571 arch/ia64/kernel/mca.c printk(KERN_WARNING "WARNING: Switching to polling CPE handler; error records may be lost\n"); printk 612 arch/ia64/kernel/mca.c printk(KERN_ERR "Failed to register Corrected Platform " printk 1432 arch/ia64/kernel/mca.c printk(KERN_WARNING "WARNING: Switching to polling CMC handler; error records may be lost\n"); printk 1489 arch/ia64/kernel/mca.c printk(KERN_WARNING "Returning to interrupt driven CMC handler\n"); printk 1565 arch/ia64/kernel/mca.c printk(KERN_WARNING "Returning to interrupt driven CPE handler\n"); printk 1616 arch/ia64/kernel/mca.c printk(KERN_ERR "Processes interrupted by INIT -"); printk 1624 arch/ia64/kernel/mca.c printk(" %d", g->pid); printk 1626 arch/ia64/kernel/mca.c printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); printk 1629 arch/ia64/kernel/mca.c printk("\n\n"); printk 1632 arch/ia64/kernel/mca.c printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); printk 1953 arch/ia64/kernel/mca.c printk(KERN_INFO "Increasing MCA rendezvous timeout from " printk 1959 arch/ia64/kernel/mca.c printk(KERN_ERR "Failed to register rendezvous interrupt " printk 1971 arch/ia64/kernel/mca.c printk(KERN_ERR "Failed to register wakeup interrupt with SAL " printk 1992 arch/ia64/kernel/mca.c printk(KERN_ERR "Failed to register OS MCA handler with SAL " printk 2021 arch/ia64/kernel/mca.c printk(KERN_ERR "Failed to register m/s INIT handlers with SAL " printk 2026 arch/ia64/kernel/mca.c printk(KERN_ERR "Failed to register default monarch INIT process\n"); printk 2042 arch/ia64/kernel/mca.c printk(KERN_INFO "MCA related initialization done\n"); printk 2118 arch/ia64/kernel/mca.c printk(KERN_ERR "%s: Failed to find irq for CPE " printk 159 arch/ia64/kernel/mca_drv.c printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, " printk 168 arch/ia64/kernel/mca_drv.c printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr); printk 171 arch/ia64/kernel/mca_drv.c printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr); printk 775 arch/ia64/kernel/mca_drv.c printk(KERN_ERR "ia64_reg_MCA_extension failed.\n"); printk 44 arch/ia64/kernel/module.c # define DEBUGP printk printk 159 arch/ia64/kernel/module.c printk(KERN_ERR "%s: invalid slot number %d for IMM64\n", printk 171 arch/ia64/kernel/module.c printk(KERN_ERR "%s: invalid slot number %d for IMM60\n", printk 176 arch/ia64/kernel/module.c printk(KERN_ERR "%s: value %ld out of IMM60 range\n", printk 188 arch/ia64/kernel/module.c printk(KERN_ERR "%s: value %li out of IMM22 range\n", printk 203 arch/ia64/kernel/module.c printk(KERN_ERR "%s: value %li out of IMM21b range\n", printk 446 arch/ia64/kernel/module.c printk(KERN_ERR "%s: sections missing\n", mod->name); printk 573 arch/ia64/kernel/module.c printk("%s: mistargeted PLT: wanted %lx, got %lx\n", printk 593 arch/ia64/kernel/module.c printk(KERN_ERR "%s: fdesc for zero requested!\n", mod->name); printk 691 arch/ia64/kernel/module.c printk(KERN_ERR "%s: %s reloc against " printk 734 arch/ia64/kernel/module.c printk(KERN_ERR "%s: special reloc %s not supported", printk 737 arch/ia64/kernel/module.c printk(KERN_ERR "%s: unknown special reloc %x\n", printk 749 arch/ia64/kernel/module.c printk(KERN_ERR "%s: %s reloc not supported\n", printk 754 arch/ia64/kernel/module.c printk(KERN_ERR "%s: unknown reloc %x\n", mod->name, r_type); printk 776 arch/ia64/kernel/module.c printk(KERN_ERR "%s: format %u needed by %s reloc is not supported\n", printk 781 arch/ia64/kernel/module.c printk(KERN_ERR "%s: relocation %s resulted in unknown format %u\n", printk 220 arch/ia64/kernel/palinfo.c printk(KERN_ERR "ia64_pal_cache_summary=%ld\n", status); printk 303 arch/ia64/kernel/palinfo.c printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status); printk 341 arch/ia64/kernel/palinfo.c printk(KERN_ERR "ia64_pal_vm_page_size=%ld\n", status); printk 361 arch/ia64/kernel/palinfo.c printk(KERN_ERR "ia64_get_ptce=%ld\n", status); printk 753 arch/ia64/kernel/palinfo.c printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status); printk 764 arch/ia64/kernel/palinfo.c printk(KERN_ERR "palinfo: pal call failed on tr[%lu:%lu]=%ld\n", printk 889 arch/ia64/kernel/palinfo.c printk(KERN_ERR "palinfo: remote CPU call from %d to %d on function %d: " printk 899 arch/ia64/kernel/palinfo.c printk(KERN_ERR "palinfo: should not be called with non SMP kernel\n"); printk 961 arch/ia64/kernel/palinfo.c printk(KERN_INFO "PAL Information Facility v%s\n", PALINFO_VERSION); printk 154 arch/ia64/kernel/patch.c printk(KERN_INFO "Leaving McKinley Errata 9 workaround enabled\n"); printk 236 arch/ia64/kernel/perfmon.c if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \ printk 241 arch/ia64/kernel/perfmon.c if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \ printk 963 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon.%d: invalid task[%d] current[%d]\n", __LINE__, task_pid_nr(task), task_pid_nr(current)); printk 967 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon.%d: task[%d] current[%d] invalid state=%d\n", __LINE__, printk 1246 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: duplicate sampling format: %s\n", fmt->fmt_name); printk 1251 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: added sampling format %s\n", fmt->fmt_name); printk 1269 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: cannot unregister format, not found\n"); printk 1274 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: removed sampling format: %s\n", fmt->fmt_name); printk 1373 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: invalid release for ctx %p sys_use_dbregs=0\n", ctx); printk 1410 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_remove_smpl_mapping [%d] invalid context mm=%p\n", task_pid_nr(task), task->mm); printk 1422 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size); printk 1464 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_free_smpl_buffer [%d] no buffer\n", task_pid_nr(current)); printk 1510 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_poll: bad magic [%d]\n", task_pid_nr(current)); printk 1516 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_read: NULL ctx [%d]\n", task_pid_nr(current)); printk 1579 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_read no msg for ctx=%p [%d]\n", ctx, task_pid_nr(current)); printk 1610 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_poll: bad magic [%d]\n", task_pid_nr(current)); printk 1616 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_poll: NULL ctx [%d]\n", task_pid_nr(current)); printk 1670 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_fasync bad magic [%d]\n", task_pid_nr(current)); printk 1676 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_fasync NULL ctx [%d]\n", task_pid_nr(current)); printk 1713 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_syswide_force_stop for CPU%d but on CPU%d\n", printk 1720 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_syswide_force_stop CPU%d unexpected owner [%d] instead of [%d]\n", printk 1726 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_syswide_force_stop CPU%d unexpected ctx %p instead of %p\n", printk 1784 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_flush: NULL ctx [%d]\n", task_pid_nr(current)); printk 1927 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_close: NULL ctx [%d]\n", task_pid_nr(current)); printk 3443 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: invalid release for [%d] ptrace_use_dbregs=0\n", task_pid_nr(task)); printk 3495 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: [%d] pfm_restart no task\n", task_pid_nr(current)); printk 3614 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon debugging %s (timing reset)\n", pfm_sysctl.debug ? "on" : "off"); printk 4516 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_exit_thread [%d] ctx unloaded\n", task_pid_nr(task)); printk 4522 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_exit_thread [%d] state=%d unload failed %d\n", task_pid_nr(task), state, ret); printk 4531 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_exit_thread [%d] state=%d unload failed %d\n", task_pid_nr(task), state, ret); printk 4536 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_exit_thread [%d] unexpected state=%d\n", task_pid_nr(task), state); printk 4760 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: [%d] argument too big %lu\n", task_pid_nr(current), sz); printk 4911 arch/ia64/kernel/perfmon.c printk(KERN_ERR "pfm_context_force_terminate: [%d] unloaded failed with %d\n", task_pid_nr(current), ret); printk 4949 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: [%d] has no PFM context\n", printk 5068 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_ovfl_notify_user no more notification msgs\n"); printk 5098 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: pfm_end_notify_user no more notification msgs\n"); printk 5359 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: CPU%d overflow handler [%d] pmc0=0x%lx\n", printk 5454 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: spurious overflow interrupt on CPU%d: process %d has no PFM context\n", printk 5459 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: spurious overflow interrupt on CPU%d: process %d, invalid flag\n", printk 6481 arch/ia64/kernel/perfmon.c printk("perfmon: version %u.%u IRQ %u\n", printk 6487 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: disabled, there is no support for processor family %d\n", printk 6519 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: unsupported number of code debug registers (%u)\n", pmu_conf->num_ibrs); printk 6524 arch/ia64/kernel/perfmon.c printk(KERN_INFO "perfmon: unsupported number of data debug registers (%u)\n", pmu_conf->num_ibrs); printk 6530 arch/ia64/kernel/perfmon.c printk("perfmon: %s PMU detected, %u PMCs, %u PMDs, %u counters (%lu bits)\n", printk 6539 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: not enough pmc/pmd, perfmon disabled\n"); printk 6549 arch/ia64/kernel/perfmon.c printk(KERN_ERR "perfmon: cannot create /proc entry, perfmon disabled\n"); printk 6626 arch/ia64/kernel/perfmon.c printk("CPU%d from %s() current [%d] iip=0x%lx %s\n", printk 6636 arch/ia64/kernel/perfmon.c printk("->CPU%d owner [%d] ctx=%p\n", this_cpu, task ? task_pid_nr(task) : -1, ctx); printk 6640 arch/ia64/kernel/perfmon.c printk("->CPU%d pmc0=0x%lx psr.pp=%d psr.up=%d dcr.pp=%d syst_info=0x%lx user_psr.up=%d user_psr.pp=%d\n", printk 6655 arch/ia64/kernel/perfmon.c printk("->CPU%d pmc[%d]=0x%lx thread_pmc[%d]=0x%lx\n", this_cpu, i, ia64_get_pmc(i), i, ctx->th_pmcs[i]); printk 6660 arch/ia64/kernel/perfmon.c printk("->CPU%d pmd[%d]=0x%lx thread_pmd[%d]=0x%lx\n", this_cpu, i, ia64_get_pmd(i), i, ctx->th_pmds[i]); printk 6664 arch/ia64/kernel/perfmon.c printk("->CPU%d ctx_state=%d vaddr=%p addr=%p fd=%d ctx_task=[%d] saved_psr_up=0x%lx\n", printk 28 arch/ia64/kernel/perfmon_default_smpl.c if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \ printk 33 arch/ia64/kernel/perfmon_default_smpl.c if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \ printk 273 arch/ia64/kernel/perfmon_default_smpl.c printk("perfmon_default_smpl: %s v%u.%u registered\n", printk 278 arch/ia64/kernel/perfmon_default_smpl.c printk("perfmon_default_smpl: %s cannot register ret=%d\n", printk 292 arch/ia64/kernel/perfmon_default_smpl.c printk("perfmon_default_smpl: unregister %s=%d\n", default_fmt.fmt_name, ret); printk 72 arch/ia64/kernel/process.c printk("\nCall Trace:\n"); printk 80 arch/ia64/kernel/process.c printk(" [<%016lx>] %pS\n" printk 105 arch/ia64/kernel/process.c printk("\n"); printk 107 arch/ia64/kernel/process.c printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s (%s)\n", printk 110 arch/ia64/kernel/process.c printk("ip is at %pS\n", (void *)ip); printk 111 arch/ia64/kernel/process.c printk("unat: %016lx pfs : %016lx rsc : %016lx\n", printk 113 arch/ia64/kernel/process.c printk("rnat: %016lx bsps: %016lx pr : %016lx\n", printk 115 arch/ia64/kernel/process.c printk("ldrs: %016lx ccv : %016lx fpsr: %016lx\n", printk 117 arch/ia64/kernel/process.c printk("csd : %016lx ssd : %016lx\n", regs->ar_csd, regs->ar_ssd); printk 118 arch/ia64/kernel/process.c printk("b0 : %016lx b6 : %016lx b7 : %016lx\n", regs->b0, regs->b6, regs->b7); printk 119 arch/ia64/kernel/process.c printk("f6 : %05lx%016lx f7 : %05lx%016lx\n", printk 122 arch/ia64/kernel/process.c printk("f8 : %05lx%016lx f9 : %05lx%016lx\n", printk 125 arch/ia64/kernel/process.c printk("f10 : %05lx%016lx f11 : %05lx%016lx\n", printk 129 arch/ia64/kernel/process.c printk("r1 : %016lx r2 : %016lx r3 : %016lx\n", regs->r1, regs->r2, regs->r3); printk 130 arch/ia64/kernel/process.c printk("r8 : %016lx r9 : %016lx r10 : %016lx\n", regs->r8, regs->r9, regs->r10); printk 131 arch/ia64/kernel/process.c printk("r11 : %016lx r12 : %016lx r13 : %016lx\n", regs->r11, regs->r12, regs->r13); printk 132 arch/ia64/kernel/process.c printk("r14 : %016lx r15 : %016lx r16 : %016lx\n", regs->r14, regs->r15, regs->r16); printk 133 arch/ia64/kernel/process.c printk("r17 : %016lx r18 : %016lx r19 : %016lx\n", regs->r17, regs->r18, regs->r19); printk 134 arch/ia64/kernel/process.c printk("r20 : %016lx r21 : %016lx r22 : %016lx\n", regs->r20, regs->r21, regs->r22); printk 135 arch/ia64/kernel/process.c printk("r23 : %016lx r24 : %016lx r25 : %016lx\n", regs->r23, regs->r24, regs->r25); printk 136 arch/ia64/kernel/process.c printk("r26 : %016lx r27 : %016lx r28 : %016lx\n", regs->r26, regs->r27, regs->r28); printk 137 arch/ia64/kernel/process.c printk("r29 : %016lx r30 : %016lx r31 : %016lx\n", regs->r29, regs->r30, regs->r31); printk 149 arch/ia64/kernel/process.c printk("r%-3u:%c%016lx%s", 32 + i, is_nat ? '*' : ' ', val, printk 160 arch/ia64/kernel/process.c printk(KERN_EMERG "%s", s); printk 58 arch/ia64/kernel/ptrace.c # define dprintk(format...) printk(format) printk 155 arch/ia64/kernel/sal.c printk(KERN_INFO "SAL Platform features:"); printk 157 arch/ia64/kernel/sal.c printk(" None\n"); printk 162 arch/ia64/kernel/sal.c printk(" BusLock"); printk 164 arch/ia64/kernel/sal.c printk(" IRQ_Redirection"); printk 168 arch/ia64/kernel/sal.c printk(" IPI_Redirection"); printk 172 arch/ia64/kernel/sal.c printk(" ITC_Drift"); printk 173 arch/ia64/kernel/sal.c printk("\n"); printk 185 arch/ia64/kernel/sal.c printk(KERN_INFO "SAL: AP wakeup using external interrupt " printk 189 arch/ia64/kernel/sal.c printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n"); printk 202 arch/ia64/kernel/sal.c printk ("no_int_routing on\n"); printk 260 arch/ia64/kernel/sal.c printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status); printk 268 arch/ia64/kernel/sal.c printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; " printk 307 arch/ia64/kernel/sal.c printk(KERN_WARNING "Hmm, no SAL System Table.\n"); printk 312 arch/ia64/kernel/sal.c printk(KERN_ERR "bad signature in system table!"); printk 320 arch/ia64/kernel/sal.c printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n", printk 151 arch/ia64/kernel/setup.c printk(KERN_WARNING "warning: skipping physical page 0\n"); printk 189 arch/ia64/kernel/setup.c printk(KERN_WARNING "warning: skipping physical page 0\n"); printk 301 arch/ia64/kernel/setup.c printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " printk 414 arch/ia64/kernel/setup.c printk(KERN_INFO "Initial ramdisk at: 0x%lx (%llu bytes)\n", printk 443 arch/ia64/kernel/setup.c printk(KERN_INFO "No I/O port range found in EFI memory map, " printk 483 arch/ia64/kernel/setup.c printk(KERN_WARNING "invalid screen-info, guessing 80x25\n"); printk 796 arch/ia64/kernel/setup.c printk(KERN_ERR printk 884 arch/ia64/kernel/setup.c printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n", printk 898 arch/ia64/kernel/setup.c printk(KERN_ERR "%s: ia64_pal_cache_config_info" printk 920 arch/ia64/kernel/setup.c printk(KERN_ERR "%s: ia64_pal_cache_config_info" printk 1055 arch/ia64/kernel/setup.c printk(KERN_WARNING "cpu_init: PAL VM summary failed, assuming 18 RID bits\n"); printk 1065 arch/ia64/kernel/setup.c printk(KERN_WARNING "cpu_init: PAL RSE info failed; assuming 96 physical " printk 147 arch/ia64/kernel/signal.c printk("SIG return (%s:%d): sp=%lx ip=%lx\n", printk 311 arch/ia64/kernel/signal.c printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n", printk 128 arch/ia64/kernel/smp.c printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n", printk 63 arch/ia64/kernel/smpboot.c #define Dprintk(x...) printk(x) printk 163 arch/ia64/kernel/smpboot.c printk ("no_int_routing on\n"); printk 184 arch/ia64/kernel/smpboot.c printk ("Fixed BSP b0 value from CPU %d\n", cpuid); printk 300 arch/ia64/kernel/smpboot.c printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master); printk 337 arch/ia64/kernel/smpboot.c printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n", printk 341 arch/ia64/kernel/smpboot.c printk(KERN_INFO "CPU %d: synchronized ITC with CPU %u (last diff %ld cycles, " printk 369 arch/ia64/kernel/smpboot.c printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n", printk 484 arch/ia64/kernel/smpboot.c printk(KERN_ERR "Processor 0x%x/0x%x is stuck.\n", cpu, sapicid); printk 548 arch/ia64/kernel/smpboot.c printk(KERN_INFO "Boot processor id 0x%x/0x%x\n", 0, boot_cpu_id); printk 556 arch/ia64/kernel/smpboot.c printk(KERN_INFO "SMP mode deactivated.\n"); printk 617 arch/ia64/kernel/smpboot.c printk ("CPU (%d) is CPEI Target\n", cpu); printk 635 arch/ia64/kernel/smpboot.c printk ("Re-targeting CPEI to cpu %d\n", new_cpei_cpu); printk 639 arch/ia64/kernel/smpboot.c printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu); printk 655 arch/ia64/kernel/smpboot.c printk ("Your platform does not support removal of BSP\n"); printk 681 arch/ia64/kernel/smpboot.c printk ("CPU %d is now offline\n", cpu); printk 686 arch/ia64/kernel/smpboot.c printk(KERN_ERR "CPU %u didn't die...\n", cpu); printk 704 arch/ia64/kernel/smpboot.c printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n", printk 781 arch/ia64/kernel/smpboot.c printk(KERN_ERR "SMP: Can't set SAL AP Boot Rendezvous: %s\n", printk 798 arch/ia64/kernel/smpboot.c printk(KERN_ERR printk 812 arch/ia64/kernel/smpboot.c printk(KERN_ERR printk 172 arch/ia64/kernel/time.c printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n", printk 245 arch/ia64/kernel/time.c printk("Jitter checking for ITC timers disabled\n"); printk 266 arch/ia64/kernel/time.c printk(KERN_ERR "SAL_FREQ_BASE_PLATFORM failed: %s\n", ia64_sal_strerror(status)); printk 270 arch/ia64/kernel/time.c printk(KERN_ERR "PAL_FREQ_RATIOS failed with status=%ld\n", status); printk 274 arch/ia64/kernel/time.c printk(KERN_ERR printk 282 arch/ia64/kernel/time.c printk(KERN_ERR "Platform base frequency %lu bogus---resetting to 75MHz!\n", printk 295 arch/ia64/kernel/time.c printk(KERN_DEBUG "CPU %d: base freq=%lu.%03luMHz, ITC ratio=%u/%u, " printk 302 arch/ia64/kernel/time.c printk("+/-%ldppm\n", itc_drift); printk 305 arch/ia64/kernel/time.c printk("\n"); printk 314 arch/ia64/kernel/topology.c printk(KERN_ERR "ia64_pal_cache_summary=%ld\n", status); printk 67 arch/ia64/kernel/traps.c printk("%s[%d]: %s %ld [%d]\n", printk 75 arch/ia64/kernel/traps.c printk(KERN_ERR "Recursive die() failure, output suppressed\n"); printk 321 arch/ia64/kernel/traps.c printk(KERN_WARNING printk 335 arch/ia64/kernel/traps.c printk(KERN_ERR "handle_fpu_swa: fp_emulate() returned -1\n"); printk 360 arch/ia64/kernel/traps.c printk(KERN_ERR "handle_fpu_swa: fp_emulate() returned -1\n"); printk 453 arch/ia64/kernel/traps.c printk("%s[%d]: possible hazard @ ip=%016lx (pr = %016lx)\n", printk 589 arch/ia64/kernel/traps.c printk(KERN_ERR "Unexpected IA-32 exception (Trap 45)\n"); printk 590 arch/ia64/kernel/traps.c printk(KERN_ERR " iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx\n", printk 596 arch/ia64/kernel/traps.c printk(KERN_ERR "Unexpected IA-32 intercept trap (Trap 46)\n"); printk 597 arch/ia64/kernel/traps.c printk(KERN_ERR " iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx, iim - 0x%lx\n", printk 36 arch/ia64/kernel/unaligned.c # define DPRINT(a...) do { printk("%s %u: ", __func__, __LINE__); printk (a); } while (0) printk 45 arch/ia64/kernel/unaligned.c printk("%s", str); printk 47 arch/ia64/kernel/unaligned.c printk (" %02x", *cp++); printk 48 arch/ia64/kernel/unaligned.c printk("\n"); printk 682 arch/ia64/kernel/unaligned.c printk(KERN_ERR "%s: register update on speculative load, error\n", __func__); printk 1111 arch/ia64/kernel/unaligned.c printk(KERN_ERR "%s: register update on speculative load pair, error\n", printk 1348 arch/ia64/kernel/unaligned.c printk(KERN_WARNING "%s", buf); printk 1365 arch/ia64/kernel/unaligned.c printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n", printk 62 arch/ia64/kernel/unwind.c # define UNW_DPRINT(n, ...) if (UNW_DEBUG_ON(n)) printk(__VA_ARGS__) printk 622 arch/ia64/kernel/unwind.c printk(KERN_ERR "unwind: cannot stack reg state!\n"); printk 635 arch/ia64/kernel/unwind.c printk(KERN_ERR "unwind: stack underflow!\n"); printk 651 arch/ia64/kernel/unwind.c printk(KERN_ERR "unwind.dup_state_stack: out of memory\n"); printk 1045 arch/ia64/kernel/unwind.c printk(KERN_ERR "unwind: failed to find state labeled 0x%lx\n", label); printk 1055 arch/ia64/kernel/unwind.c printk(KERN_ERR "unwind.desc_label_state(): out of memory\n"); printk 1149 arch/ia64/kernel/unwind.c #define UNW_DEC_BAD_CODE(code) printk(KERN_ERR "unwind: unknown code 0x%02x\n", \ printk 2203 arch/ia64/kernel/unwind.c printk("%s: failed to find gate DSO's unwind table!\n", __func__); printk 2220 arch/ia64/kernel/unwind.c printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __func__); printk 210 arch/ia64/mm/contig.c printk("Virtual mem_map starts at 0x%p\n", mem_map); printk 494 arch/ia64/mm/discontig.c printk(KERN_ERR "node info missing!\n"); printk 612 arch/ia64/mm/discontig.c printk("Virtual mem_map starts at 0x%p\n", vmem_map); printk 267 arch/ia64/mm/fault.c printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference (address %016lx)\n", address); printk 269 arch/ia64/mm/fault.c printk(KERN_ALERT "Unable to handle kernel paging request at " printk 183 arch/ia64/mm/hugetlbpage.c printk(KERN_WARNING "Invalid huge page size specified\n"); printk 195 arch/ia64/mm/init.c printk(KERN_INFO "Freeing initrd memory: %ldkB freed\n", (end - start) >> 10); printk 681 arch/ia64/mm/init.c printk("%s: Problem encountered in __add_pages() as ret=%d\n", printk 380 arch/ia64/mm/tlb.c printk(KERN_ERR "PAL_VM_PAGE_SIZE failed with status=%ld; " printk 397 arch/ia64/mm/tlb.c printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status); printk 411 arch/ia64/mm/tlb.c printk(KERN_DEBUG "TR register number exceeds " printk 477 arch/ia64/mm/tlb.c printk(KERN_DEBUG "Overlapped Entry" printk 489 arch/ia64/mm/tlb.c printk(KERN_DEBUG "Overlapped Entry" printk 88 arch/ia64/oprofile/perfmon.c printk(KERN_INFO "oprofile: using perfmon.\n"); printk 100 arch/ia64/uv/kernel/setup.c printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); printk 117 arch/ia64/uv/kernel/setup.c printk(KERN_DEBUG "UV cpu %d, nid %d\n", cpu, nid); printk 120 arch/m68k/coldfire/m528x.c printk(KERN_INFO "WildFireMod hibernating...\n"); printk 132 arch/m68k/coldfire/m528x.c printk(KERN_EMERG "Failed to hibernate. Halting!\n"); printk 61 arch/m68k/coldfire/sltimers.c printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n", printk 181 arch/m68k/coldfire/timers.c printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", printk 28 arch/m68k/coldfire/vectors.c printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__); printk 131 arch/m68k/include/asm/dma.h printk("enable_dma(dmanr=%d)\n", dmanr); printk 144 arch/m68k/include/asm/dma.h printk("disable_dma(dmanr=%d)\n", dmanr); printk 177 arch/m68k/include/asm/dma.h printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); printk 206 arch/m68k/include/asm/dma.h printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, printk 219 arch/m68k/include/asm/dma.h printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); printk 239 arch/m68k/include/asm/dma.h printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", printk 253 arch/m68k/include/asm/dma.h printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); printk 267 arch/m68k/include/asm/dma.h printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); printk 286 arch/m68k/include/asm/dma.h printk("get_dma_residue(dmanr=%d)\n", dmanr); printk 324 arch/m68k/include/asm/dma.h printk("enable_dma(dmanr=%d)\n", dmanr); printk 336 arch/m68k/include/asm/dma.h printk("disable_dma(dmanr=%d)\n", dmanr); printk 368 arch/m68k/include/asm/dma.h printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); printk 392 arch/m68k/include/asm/dma.h printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, printk 404 arch/m68k/include/asm/dma.h printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); printk 423 arch/m68k/include/asm/dma.h printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", printk 437 arch/m68k/include/asm/dma.h printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); printk 453 arch/m68k/include/asm/dma.h printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); printk 472 arch/m68k/include/asm/dma.h printk("get_dma_residue(dmanr=%d)\n", dmanr); printk 273 arch/m68k/include/asm/math-emu.h jsr printk printk 207 arch/m68k/include/asm/mcf_pgtable.h printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ printk 210 arch/m68k/include/asm/mcf_pgtable.h printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ printk 213 arch/m68k/include/asm/mcf_pgtable.h printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ printk 157 arch/m68k/include/asm/motorola_pgtable.h printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) printk 159 arch/m68k/include/asm/motorola_pgtable.h printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) printk 161 arch/m68k/include/asm/motorola_pgtable.h printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 15 arch/m68k/kernel/module.c #define DEBUGP(fmt, ...) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) printk 867 arch/m68k/mac/config.c printk(KERN_DEBUG " Penguin bootinfo data:\n"); printk 868 arch/m68k/mac/config.c printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n", printk 872 arch/m68k/mac/config.c printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n", printk 875 arch/m68k/mac/config.c printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n", printk 877 arch/m68k/mac/config.c printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n", printk 120 arch/m68k/mac/iop.c printk(KERN_DEBUG "%s: " fmt, __func__, ##__VA_ARGS__) printk 122 arch/m68k/mac/iop.c printk(KERN_CONT fmt, ##__VA_ARGS__) printk 46 arch/m68k/mac/psc.c printk(KERN_DEBUG "PSC #%d: IFR = 0x%02X IER = 0x%02X\n", printk 271 arch/m68k/mac/via.c printk(KERN_DEBUG "VIA1: DDRA = 0x%02X DDRB = 0x%02X ACR = 0x%02X\n", printk 273 arch/m68k/mac/via.c printk(KERN_DEBUG " PCR = 0x%02X IFR = 0x%02X IER = 0x%02X\n", printk 278 arch/m68k/mac/via.c printk(KERN_DEBUG "VIA2: IFR = 0x%02X IER = 0x%02X\n", printk 280 arch/m68k/mac/via.c printk(KERN_DEBUG " SIFR = 0x%02X SIER = 0x%02X\n", printk 283 arch/m68k/mac/via.c printk(KERN_DEBUG "VIA2: DDRA = 0x%02X DDRB = 0x%02X ACR = 0x%02X\n", printk 286 arch/m68k/mac/via.c printk(KERN_DEBUG " PCR = 0x%02X IFR = 0x%02X IER = 0x%02X\n", printk 311 arch/m68k/mac/via.c printk(KERN_ERR "via_get_cache_disable called on a non-VIA machine!\n"); printk 135 arch/m68k/mm/kmap.c printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); printk 154 arch/m68k/mm/kmap.c printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); printk 196 arch/m68k/mm/kmap.c printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr); printk 201 arch/m68k/mm/kmap.c printk("ioremap: no mem for pmd_dir\n"); printk 213 arch/m68k/mm/kmap.c printk("ioremap: no mem for pte_dir\n"); printk 224 arch/m68k/mm/kmap.c printk("\n"); printk 267 arch/m68k/mm/kmap.c printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); printk 287 arch/m68k/mm/kmap.c printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); printk 345 arch/m68k/mm/kmap.c printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); printk 364 arch/m68k/mm/kmap.c printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); printk 94 arch/m68k/mm/motorola.c printk("kernel_ptr_init: %p\n", last_pgtable); printk 135 arch/m68k/mm/motorola.c printk ("\npa=%#lx va=%#lx ", physaddr & PAGE_MASK, printk 143 arch/m68k/mm/motorola.c printk ("[very early term]"); printk 155 arch/m68k/mm/motorola.c printk ("[new pointer %p]", pmd_dir); printk 164 arch/m68k/mm/motorola.c printk ("[early term]"); printk 171 arch/m68k/mm/motorola.c printk ("[zero map]"); printk 187 arch/m68k/mm/motorola.c printk ("[new table]"); printk 206 arch/m68k/mm/motorola.c printk("\n"); printk 222 arch/m68k/mm/motorola.c printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem); printk 240 arch/m68k/mm/motorola.c printk("Ignoring memory chunk at 0x%lx:0x%lx before the first chunk\n", printk 242 arch/m68k/mm/motorola.c printk("Fix your bootloader or use a memfile to make use of this area!\n"); printk 297 arch/m68k/mm/motorola.c printk ("before free_area_init\n"); printk 166 arch/microblaze/include/asm/pgtable.h printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \ printk 169 arch/microblaze/include/asm/pgtable.h printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \ printk 172 arch/microblaze/include/asm/pgtable.h printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ printk 63 arch/mips/alchemy/board-gpr.c printk(KERN_EMERG "Triggering watchdog soft reset...\n"); printk 80 arch/mips/alchemy/board-gpr.c printk(KERN_INFO "Trapeze ITS GPR board\n"); printk 95 arch/mips/alchemy/board-mtx1.c printk(KERN_INFO "4G Systems MTX-1 Board\n"); printk 293 arch/mips/alchemy/board-mtx1.c printk(KERN_INFO "mtx1: failed to request %d\n", printk 231 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", printk 558 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " printk 683 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", printk 768 arch/mips/alchemy/common/dbdma.c printk(KERN_WARNING "warning: DMA channel won't halt\n"); printk 902 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n", printk 905 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", printk 909 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); printk 910 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", printk 912 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", printk 920 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", printk 922 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", printk 925 arch/mips/alchemy/common/dbdma.c printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", printk 1068 arch/mips/alchemy/common/dbdma.c printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); printk 142 arch/mips/alchemy/common/dma.c printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr); printk 143 arch/mips/alchemy/common/dma.c printk(KERN_INFO " mode = 0x%08x\n", printk 145 arch/mips/alchemy/common/dma.c printk(KERN_INFO " addr = 0x%08x\n", printk 147 arch/mips/alchemy/common/dma.c printk(KERN_INFO " start0 = 0x%08x\n", printk 149 arch/mips/alchemy/common/dma.c printk(KERN_INFO " start1 = 0x%08x\n", printk 151 arch/mips/alchemy/common/dma.c printk(KERN_INFO " count0 = 0x%08x\n", printk 153 arch/mips/alchemy/common/dma.c printk(KERN_INFO " count1 = 0x%08x\n", printk 226 arch/mips/alchemy/common/dma.c printk(KERN_ERR "Error trying to free DMA%d\n", dmanr); printk 260 arch/mips/alchemy/common/dma.c printk(KERN_INFO "Alchemy DMA initialized\n"); printk 120 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy: no memory for UART data\n"); printk 130 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy: failed to register UARTs\n"); printk 236 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); printk 256 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); printk 276 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); printk 409 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); printk 420 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy: failed to register MAC0\n"); printk 430 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); printk 443 arch/mips/alchemy/common/platform.c printk(KERN_INFO "Alchemy: failed to register MAC1\n"); printk 135 arch/mips/alchemy/common/time.c printk(KERN_INFO "Alchemy clocksource installed\n"); printk 134 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" printk 788 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "WARNING!!!\n"); printk 789 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "WARNING!!!\n"); printk 790 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); printk 791 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "the board updated to latest revisions.\n"); printk 792 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "This software will not work reliably\n"); printk 793 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); printk 794 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "WARNING!!!\n"); printk 795 arch/mips/alchemy/devboards/db1200.c printk(KERN_ERR "WARNING!!!\n"); printk 878 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO "%s device configuration:\n", get_system_type()); printk 887 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); printk 888 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO " OTG port VBUS supply available!\n"); printk 895 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); printk 896 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO " OTG port VBUS supply disabled\n"); printk 908 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); printk 913 arch/mips/alchemy/devboards/db1200.c printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); printk 874 arch/mips/alchemy/devboards/db1300.c printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" printk 91 arch/mips/alchemy/devboards/pm.c printk(KERN_ERR "db1x: no wakeup source activated!\n"); printk 134 arch/mips/ar7/clock.c printk(KERN_WARNING printk 139 arch/mips/ar7/clock.c printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", printk 264 arch/mips/ar7/clock.c printk(KERN_INFO printk 335 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Async mode\n"); printk 337 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Setting DSP clock\n"); printk 346 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Setting CPU clock\n"); printk 357 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Sync 2:1 mode\n"); printk 359 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Setting CPU clock\n"); printk 368 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Setting DSP clock\n"); printk 376 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); printk 378 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Setting DSP clock\n"); printk 390 arch/mips/ar7/clock.c printk(KERN_INFO "Clocks: Setting USB clock\n"); printk 313 arch/mips/ar7/gpio.c printk(KERN_ERR "%s: failed to ioremap regs\n", printk 320 arch/mips/ar7/gpio.c printk(KERN_ERR "%s: failed to add gpiochip\n", printk 324 arch/mips/ar7/gpio.c printk(KERN_INFO "%s: registered %d GPIOs\n", printk 91 arch/mips/ar7/setup.c printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n", printk 26 arch/mips/ar7/time.c printk(KERN_ERR "unable to get cpu clock\n"); printk 40 arch/mips/cobalt/time.c printk(KERN_INFO "MIPS counter frequency %dHz\n", mips_hpt_frequency); printk 73 arch/mips/dec/ecc-berr.c printk(KERN_ALERT "Unidentified bus error %s\n", kind); printk 184 arch/mips/dec/ecc-berr.c printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n", printk 188 arch/mips/dec/ecc-berr.c printk(fmt, " ECC syndrome ", syn, status, xbit, i); printk 214 arch/mips/dec/ecc-berr.c printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n", printk 137 arch/mips/dec/kn01-berr.c printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n", printk 169 arch/mips/dec/kn01-berr.c printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n", printk 83 arch/mips/dec/kn02xa-berr.c printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n", printk 87 arch/mips/dec/kn02xa-berr.c printk(KERN_ALERT " Byte lane status %#3x -- " printk 118 arch/mips/dec/kn02xa-berr.c printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n", printk 38 arch/mips/dec/prom/cmdline.c printk("arcs_cmdline: %s\n", &(arcs_cmdline[0])); printk 126 arch/mips/dec/prom/identify.c printk("Zero sysid returned from PROM! " printk 183 arch/mips/dec/prom/identify.c printk("This is an %s, id is %x\n", printk 186 arch/mips/dec/prom/identify.c printk("This is a %s\n", dec_system_strings[mips_machtype]); printk 117 arch/mips/dec/prom/init.c printk(cpu_msg); printk 118 arch/mips/dec/prom/init.c printk(r4k_msg); printk 128 arch/mips/dec/prom/init.c printk(cpu_msg); printk 129 arch/mips/dec/prom/init.c printk(r3k_msg); printk 153 arch/mips/dec/time.c printk(KERN_INFO "MIPS counter frequency %dHz\n", printk 28 arch/mips/emma/markeins/setup.c printk("cannot EMMA2RH Mark-eins restart.\n"); printk 35 arch/mips/emma/markeins/setup.c printk("EMMA2RH Mark-eins halted.\n"); printk 102 arch/mips/fw/arc/cmdline.c printk(KERN_DEBUG "prom cmdline: %s\n", arcs_cmdline); printk 111 arch/mips/fw/arc/identify.c printk("ARCH: %s\n", iname); printk 35 arch/mips/fw/arc/init.c printk(KERN_CRIT "Aieee, bad prom vector magic %08lx\n", printk 43 arch/mips/fw/arc/init.c printk(KERN_INFO "PROMLIB: ARC firmware Version %d Revision %d\n", printk 127 arch/mips/fw/arc/memory.c printk("ARCS MEMORY DESCRIPTOR dump:\n"); printk 130 arch/mips/fw/arc/memory.c printk("[%d,%p]: base<%08lx> pages<%08lx> type<%s>\n", printk 96 arch/mips/fw/arc/tree.c printk("[%p]:class<%s>type<%s>flags<%s>ver<%d>rev<%d>", printk 99 arch/mips/fw/arc/tree.c printk("key<%08lx>\n\tamask<%08lx>cdsize<%d>ilen<%d>iname<%s>\n", printk 94 arch/mips/include/asm/asm.h jal printk; \ printk 205 arch/mips/include/asm/mach-au1x00/au1000_dma.h printk(KERN_INFO "halt_dma: HALT poll expired!\n"); printk 135 arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h printk(_f, ## x); \ printk 81 arch/mips/include/asm/octeon/cvmx.h #define cvmx_dprintf printk printk 112 arch/mips/include/asm/pgtable-32.h printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) printk 115 arch/mips/include/asm/pgtable-32.h printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) printk 118 arch/mips/include/asm/pgtable-32.h printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 162 arch/mips/include/asm/pgtable-64.h printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) printk 165 arch/mips/include/asm/pgtable-64.h printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) printk 169 arch/mips/include/asm/pgtable-64.h printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e)) printk 172 arch/mips/include/asm/pgtable-64.h printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 89 arch/mips/jazz/jazzdma.c printk(KERN_INFO "VDMA: R4030 DMA pagetables initialized.\n"); printk 106 arch/mips/jazz/jazzdma.c printk("vdma_alloc: Invalid physical address: %08lx\n", printk 112 arch/mips/jazz/jazzdma.c printk("vdma_alloc: Invalid size: %08lx\n", size); printk 158 arch/mips/jazz/jazzdma.c printk("vdma_alloc: Allocated %d pages starting from %08lx\n", printk 162 arch/mips/jazz/jazzdma.c printk("LADDR: "); printk 164 arch/mips/jazz/jazzdma.c printk("%08x ", i << 12); printk 165 arch/mips/jazz/jazzdma.c printk("\nPADDR: "); printk 167 arch/mips/jazz/jazzdma.c printk("%08x ", pgtbl[i].frame); printk 168 arch/mips/jazz/jazzdma.c printk("\nOWNER: "); printk 170 arch/mips/jazz/jazzdma.c printk("%08x ", pgtbl[i].owner); printk 171 arch/mips/jazz/jazzdma.c printk("\n"); printk 193 arch/mips/jazz/jazzdma.c printk printk 205 arch/mips/jazz/jazzdma.c printk("vdma_free: freed %ld pages starting from %08lx\n", printk 223 arch/mips/jazz/jazzdma.c printk printk 230 arch/mips/jazz/jazzdma.c printk printk 239 arch/mips/jazz/jazzdma.c printk("vdma_remap: first=%x, pages=%x\n", first, pages); printk 242 arch/mips/jazz/jazzdma.c printk("vdma_alloc: Invalid size: %08lx\n", size); printk 250 arch/mips/jazz/jazzdma.c printk("Trying to remap other's pages.\n"); printk 268 arch/mips/jazz/jazzdma.c printk("LADDR: "); printk 270 arch/mips/jazz/jazzdma.c printk("%08x ", i << 12); printk 271 arch/mips/jazz/jazzdma.c printk("\nPADDR: "); printk 273 arch/mips/jazz/jazzdma.c printk("%08x ", pgtbl[i].frame); printk 274 arch/mips/jazz/jazzdma.c printk("\nOWNER: "); printk 276 arch/mips/jazz/jazzdma.c printk("%08x ", pgtbl[i].owner); printk 277 arch/mips/jazz/jazzdma.c printk("\n"); printk 325 arch/mips/jazz/jazzdma.c printk("vdma_stats: CONFIG: %08x\n", printk 327 arch/mips/jazz/jazzdma.c printk("R4030 translation table base: %08x\n", printk 329 arch/mips/jazz/jazzdma.c printk("R4030 translation table limit: %08x\n", printk 331 arch/mips/jazz/jazzdma.c printk("vdma_stats: INV_ADDR: %08x\n", printk 333 arch/mips/jazz/jazzdma.c printk("vdma_stats: R_FAIL_ADDR: %08x\n", printk 335 arch/mips/jazz/jazzdma.c printk("vdma_stats: M_FAIL_ADDR: %08x\n", printk 337 arch/mips/jazz/jazzdma.c printk("vdma_stats: IRQ_SOURCE: %08x\n", printk 339 arch/mips/jazz/jazzdma.c printk("vdma_stats: I386_ERROR: %08x\n", printk 341 arch/mips/jazz/jazzdma.c printk("vdma_chnl_modes: "); printk 343 arch/mips/jazz/jazzdma.c printk("%04x ", printk 346 arch/mips/jazz/jazzdma.c printk("\n"); printk 347 arch/mips/jazz/jazzdma.c printk("vdma_chnl_enables: "); printk 349 arch/mips/jazz/jazzdma.c printk("%04x ", printk 352 arch/mips/jazz/jazzdma.c printk("\n"); printk 367 arch/mips/jazz/jazzdma.c printk("vdma_enable: channel %d\n", channel); printk 374 arch/mips/jazz/jazzdma.c printk("VDMA: Channel %d: Address error!\n", channel); printk 376 arch/mips/jazz/jazzdma.c printk("VDMA: Channel %d: Memory error!\n", channel); printk 407 arch/mips/jazz/jazzdma.c printk("vdma_disable: channel %d\n", channel); printk 408 arch/mips/jazz/jazzdma.c printk("VDMA: channel %d status: %04x (%s) mode: " printk 446 arch/mips/jazz/jazzdma.c printk("vdma_set_mode: channel %d, mode 0x%x\n", channel, printk 470 arch/mips/jazz/jazzdma.c printk("VDMA: Audio DMA not supported yet.\n"); printk 474 arch/mips/jazz/jazzdma.c printk printk 495 arch/mips/jazz/jazzdma.c printk printk 509 arch/mips/jazz/jazzdma.c printk("vdma_set_addr: channel %d, addr %lx\n", channel, printk 523 arch/mips/jazz/jazzdma.c printk("vdma_set_count: channel %d, count %08x\n", channel, printk 541 arch/mips/jazz/jazzdma.c printk("vdma_get_residual: channel %d: residual=%d\n", printk 557 arch/mips/jazz/jazzdma.c printk("vdma_get_enable: channel %d: enable=%d\n", channel, printk 36 arch/mips/jz4740/setup.c printk(KERN_DEBUG printk 869 arch/mips/kernel/branch.c printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); printk 206 arch/mips/kernel/cevt-txx9.c printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n", printk 123 arch/mips/kernel/cpu-bugs64.c printk("Checking for the multiply/shift bug... "); printk 188 arch/mips/kernel/cpu-bugs64.c printk("Checking for the daddi bug... "); printk 251 arch/mips/kernel/cpu-bugs64.c printk("Checking for the daddiu bug... "); printk 1381 arch/mips/kernel/cpu-probe.c printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); printk 1897 arch/mips/kernel/cpu-probe.c printk(KERN_INFO "Unknown Octeon chip!\n"); printk 2234 arch/mips/kernel/cpu-probe.c printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id); printk 57 arch/mips/kernel/csrc-ioasic.c printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); printk 131 arch/mips/kernel/idle.c printk("Wait instruction disabled.\n"); printk 36 arch/mips/kernel/irq.c printk("unexpected IRQ # %d\n", irq); printk 87 arch/mips/kernel/irq.c printk("do_IRQ: stack overflow: %ld\n", printk 252 arch/mips/kernel/machine_kexec.c printk("Will call new kernel at %08lx\n", image->start); printk 253 arch/mips/kernel/machine_kexec.c printk("Bye ...\n"); printk 214 arch/mips/kernel/mips-mt-fpaff.c printk(KERN_DEBUG "FPU Affinity set after %ld emulations\n", printk 64 arch/mips/kernel/mips-mt.c printk("=== MIPS MT State Dump ===\n"); printk 65 arch/mips/kernel/mips-mt.c printk("-- Global State --\n"); printk 66 arch/mips/kernel/mips-mt.c printk(" MVPControl Passed: %08lx\n", mvpctl); printk 67 arch/mips/kernel/mips-mt.c printk(" MVPControl Read: %08lx\n", vpflags); printk 68 arch/mips/kernel/mips-mt.c printk(" MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0())); printk 71 arch/mips/kernel/mips-mt.c printk("-- per-VPE State --\n"); printk 76 arch/mips/kernel/mips-mt.c printk(" VPE %d\n", i); printk 77 arch/mips/kernel/mips-mt.c printk(" VPEControl : %08lx\n", printk 79 arch/mips/kernel/mips-mt.c printk(" VPEConf0 : %08lx\n", printk 81 arch/mips/kernel/mips-mt.c printk(" VPE%d.Status : %08lx\n", printk 83 arch/mips/kernel/mips-mt.c printk(" VPE%d.EPC : %08lx %pS\n", printk 86 arch/mips/kernel/mips-mt.c printk(" VPE%d.Cause : %08lx\n", printk 88 arch/mips/kernel/mips-mt.c printk(" VPE%d.Config7 : %08lx\n", printk 94 arch/mips/kernel/mips-mt.c printk("-- per-TC State --\n"); printk 101 arch/mips/kernel/mips-mt.c printk(" TC %d (current TC with VPE EPC above)\n", tc); printk 106 arch/mips/kernel/mips-mt.c printk(" TC %d\n", tc); printk 108 arch/mips/kernel/mips-mt.c printk(" TCStatus : %08lx\n", tcstatval); printk 109 arch/mips/kernel/mips-mt.c printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); printk 110 arch/mips/kernel/mips-mt.c printk(" TCRestart : %08lx %pS\n", printk 112 arch/mips/kernel/mips-mt.c printk(" TCHalt : %08lx\n", haltval); printk 113 arch/mips/kernel/mips-mt.c printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); printk 117 arch/mips/kernel/mips-mt.c printk("===========================\n"); printk 165 arch/mips/kernel/mips-mt.c printk("34K return prediction stack override set to %d.\n", printk 173 arch/mips/kernel/mips-mt.c printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu); printk 180 arch/mips/kernel/mips-mt.c printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7); printk 187 arch/mips/kernel/mips-mt.c printk("Config7: 0x%08x\n", read_c0_config7()); printk 226 arch/mips/kernel/mips-mt.c printk("Mapped %ld ITC cells starting at 0x%08x\n", printk 483 arch/mips/kernel/process.c printk("Can't analyze schedule() prologue at %p\n", schedule); printk 415 arch/mips/kernel/relocate.c printk(level); printk 251 arch/mips/kernel/setup.c printk(KERN_INFO "Initrd not found or empty"); printk 255 arch/mips/kernel/setup.c printk(KERN_ERR "Initrd extends beyond end of memory"); printk 268 arch/mips/kernel/setup.c printk(KERN_CONT " - disabling initrd\n"); printk 643 arch/mips/kernel/setup.c printk(KERN_INFO "kdump reserved memory at %lx-%lx\n", printk 17 arch/mips/kernel/signal-common.h # define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args) printk 223 arch/mips/kernel/smp-mt.c printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); printk 143 arch/mips/kernel/smp.c printk(KERN_WARNING "Overriding previously set SMP ops\n"); printk 181 arch/mips/kernel/spram.c printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n", printk 185 arch/mips/kernel/spram.c printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n", printk 26 arch/mips/kernel/topology.c printk(KERN_WARNING "topology_init: register_cpu %d " printk 114 arch/mips/kernel/traps.c printk("Call Trace:"); printk 116 arch/mips/kernel/traps.c printk("\n"); printk 122 arch/mips/kernel/traps.c printk(" (Bad stack address)"); printk 128 arch/mips/kernel/traps.c printk("\n"); printk 154 arch/mips/kernel/traps.c printk("Call Trace:\n"); printk 174 arch/mips/kernel/traps.c printk("Stack :"); printk 179 arch/mips/kernel/traps.c printk(" "); printk 236 arch/mips/kernel/traps.c printk("Code:"); printk 265 arch/mips/kernel/traps.c printk("$%2d :", i); printk 279 arch/mips/kernel/traps.c printk("Acx : %0*lx\n", field, regs->acx); printk 282 arch/mips/kernel/traps.c printk("Hi : %0*lx\n", field, regs->hi); printk 283 arch/mips/kernel/traps.c printk("Lo : %0*lx\n", field, regs->lo); printk 289 arch/mips/kernel/traps.c printk("epc : %0*lx %pS\n", field, regs->cp0_epc, printk 291 arch/mips/kernel/traps.c printk("ra : %0*lx %pS\n", field, regs->regs[31], printk 294 arch/mips/kernel/traps.c printk("Status: %08x ", (uint32_t) regs->cp0_status); printk 340 arch/mips/kernel/traps.c printk("Cause : %08x (ExcCode %02x)\n", cause, exccode); printk 343 arch/mips/kernel/traps.c printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr); printk 345 arch/mips/kernel/traps.c printk("PrId : %08x (%s)\n", read_c0_prid(), printk 365 arch/mips/kernel/traps.c printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n", printk 373 arch/mips/kernel/traps.c printk("*HwTLS: %0*lx\n", field, tls); printk 381 arch/mips/kernel/traps.c printk("\n"); printk 402 arch/mips/kernel/traps.c printk("%s[#%d]:\n", str, ++die_counter); printk 477 arch/mips/kernel/traps.c printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", printk 1571 arch/mips/kernel/traps.c printk(KERN_DEBUG "Thread Underflow\n"); printk 1574 arch/mips/kernel/traps.c printk(KERN_DEBUG "Thread Overflow\n"); printk 1577 arch/mips/kernel/traps.c printk(KERN_DEBUG "Invalid YIELD Qualifier\n"); printk 1580 arch/mips/kernel/traps.c printk(KERN_DEBUG "Gating Storage Exception\n"); printk 1583 arch/mips/kernel/traps.c printk(KERN_DEBUG "YIELD Scheduler Exception\n"); printk 1586 arch/mips/kernel/traps.c printk(KERN_DEBUG "Gating Storage Scheduler Exception\n"); printk 1589 arch/mips/kernel/traps.c printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n", printk 1742 arch/mips/kernel/traps.c printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl); printk 1747 arch/mips/kernel/traps.c printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl); printk 1750 arch/mips/kernel/traps.c printk(KERN_INFO "Cache parity protection %sabled\n", printk 1756 arch/mips/kernel/traps.c printk(KERN_INFO "L2 cache parity protection %sabled\n", printk 1768 arch/mips/kernel/traps.c printk(KERN_INFO "Cache parity protection %sabled\n", printk 1774 arch/mips/kernel/traps.c printk(KERN_INFO "Enable cache parity protection for " printk 1789 arch/mips/kernel/traps.c printk("Cache error exception:\n"); printk 1790 arch/mips/kernel/traps.c printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc()); printk 1792 arch/mips/kernel/traps.c printk("c0_cacheerr == %08x\n", reg_val); printk 1794 arch/mips/kernel/traps.c printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n", printk 1818 arch/mips/kernel/traps.c printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1)); printk 1822 arch/mips/kernel/traps.c printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0()); printk 1825 arch/mips/kernel/traps.c printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1()); printk 1870 arch/mips/kernel/traps.c printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n"); printk 1873 arch/mips/kernel/traps.c printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug); printk 1893 arch/mips/kernel/traps.c printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n"); printk 102 arch/mips/lasat/lasat_board.c printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does " printk 107 arch/mips/lasat/lasat_board.c printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version " printk 117 arch/mips/lasat/lasat_board.c printk(KERN_WARNING "WARNING...\nWARNING...\n" printk 49 arch/mips/lasat/picvue_proc.c printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno); printk 63 arch/mips/lasat/prom.c printk(KERN_DEBUG "prom vectors set up\n"); printk 92 arch/mips/lasat/prom.c printk(KERN_INFO "LASAT 200 board\n"); printk 96 arch/mips/lasat/prom.c printk(KERN_INFO "LASAT 100 board\n"); printk 261 arch/mips/lasat/sysctl.c printk(KERN_ERR "Unable to register LASAT sysctl\n"); printk 146 arch/mips/lib/dump_tlb.c printk("Index: %2d pgmask=%s ", i, msk2str(pagemask)); printk 188 arch/mips/lib/dump_tlb.c printk("\n"); printk 33 arch/mips/lib/iomap-pci.c printk(KERN_WARNING "io_map_base of root PCI bus %s unset. " printk 55 arch/mips/lib/r3k_dump_tlb.c printk("Index: %2d ", i); printk 68 arch/mips/lib/r3k_dump_tlb.c printk("\n"); printk 76 arch/mips/loongson64/lemote-2f/ec_kb3310b.c printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); printk 79 arch/mips/loongson64/lemote-2f/ec_kb3310b.c printk(KERN_INFO printk 99 arch/mips/loongson64/lemote-2f/pm.c printk(KERN_INFO "%s: irq = %d\n", __func__, irq); printk 26 arch/mips/math-emu/ieee754d.c printk("%s", m); printk 27 arch/mips/math-emu/ieee754d.c printk("<%08x,%08x>\n", (unsigned) (x.bits >> 32), printk 29 arch/mips/math-emu/ieee754d.c printk("\t="); printk 33 arch/mips/math-emu/ieee754d.c printk("Nan %c", DPSIGN(x) ? '-' : '+'); printk 35 arch/mips/math-emu/ieee754d.c printk("%c", DPMANT(x) & DP_MBIT(i) ? '1' : '0'); printk 38 arch/mips/math-emu/ieee754d.c printk("%cInfinity", DPSIGN(x) ? '-' : '+'); printk 41 arch/mips/math-emu/ieee754d.c printk("%cZero", DPSIGN(x) ? '-' : '+'); printk 44 arch/mips/math-emu/ieee754d.c printk("%c0.", DPSIGN(x) ? '-' : '+'); printk 46 arch/mips/math-emu/ieee754d.c printk("%c", DPMANT(x) & DP_MBIT(i) ? '1' : '0'); printk 47 arch/mips/math-emu/ieee754d.c printk("e%d", DPBEXP(x) - DP_EBIAS); printk 50 arch/mips/math-emu/ieee754d.c printk("%c1.", DPSIGN(x) ? '-' : '+'); printk 52 arch/mips/math-emu/ieee754d.c printk("%c", DPMANT(x) & DP_MBIT(i) ? '1' : '0'); printk 53 arch/mips/math-emu/ieee754d.c printk("e%d", DPBEXP(x) - DP_EBIAS); printk 56 arch/mips/math-emu/ieee754d.c printk("Illegal/Unknown IEEE754 value class"); printk 58 arch/mips/math-emu/ieee754d.c printk("\n"); printk 66 arch/mips/math-emu/ieee754d.c printk("%s=", m); printk 67 arch/mips/math-emu/ieee754d.c printk("<%08x>\n", (unsigned) x.bits); printk 68 arch/mips/math-emu/ieee754d.c printk("\t="); printk 72 arch/mips/math-emu/ieee754d.c printk("Nan %c", SPSIGN(x) ? '-' : '+'); printk 74 arch/mips/math-emu/ieee754d.c printk("%c", SPMANT(x) & SP_MBIT(i) ? '1' : '0'); printk 77 arch/mips/math-emu/ieee754d.c printk("%cInfinity", SPSIGN(x) ? '-' : '+'); printk 80 arch/mips/math-emu/ieee754d.c printk("%cZero", SPSIGN(x) ? '-' : '+'); printk 83 arch/mips/math-emu/ieee754d.c printk("%c0.", SPSIGN(x) ? '-' : '+'); printk 85 arch/mips/math-emu/ieee754d.c printk("%c", SPMANT(x) & SP_MBIT(i) ? '1' : '0'); printk 86 arch/mips/math-emu/ieee754d.c printk("e%d", SPBEXP(x) - SP_EBIAS); printk 89 arch/mips/math-emu/ieee754d.c printk("%c1.", SPSIGN(x) ? '-' : '+'); printk 91 arch/mips/math-emu/ieee754d.c printk("%c", SPMANT(x) & SP_MBIT(i) ? '1' : '0'); printk 92 arch/mips/math-emu/ieee754d.c printk("e%d", SPBEXP(x) - SP_EBIAS); printk 95 arch/mips/math-emu/ieee754d.c printk("Illegal/Unknown IEEE754 value class"); printk 97 arch/mips/math-emu/ieee754d.c printk("\n"); printk 317 arch/mips/mm/c-r3k.c printk("Primary instruction cache %ldkB, linesize %ld bytes.\n", printk 319 arch/mips/mm/c-r3k.c printk("Primary data cache %ldkB, linesize %ld bytes.\n", printk 1463 arch/mips/mm/c-r4k.c printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n", printk 1468 arch/mips/mm/c-r4k.c printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n", printk 1676 arch/mips/mm/c-r4k.c printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n", printk 1697 arch/mips/mm/c-r4k.c printk("Unified secondary cache %ldkB %s, linesize %d bytes.\n", printk 411 arch/mips/mm/c-tx39.c printk("Primary instruction cache %ldkB, linesize %d bytes\n", printk 413 arch/mips/mm/c-tx39.c printk("Primary data cache %ldkB, linesize %d bytes\n", printk 67 arch/mips/mm/cerr-sb1.c printk(" recoverable"); printk 69 arch/mips/mm/cerr-sb1.c printk(" dcache"); printk 71 arch/mips/mm/cerr-sb1.c printk(" icache"); printk 73 arch/mips/mm/cerr-sb1.c printk(" multiple-buserr"); printk 74 arch/mips/mm/cerr-sb1.c printk("\n"); printk 80 arch/mips/mm/cerr-sb1.c printk(" tag-parity"); printk 82 arch/mips/mm/cerr-sb1.c printk(" data-parity"); printk 84 arch/mips/mm/cerr-sb1.c printk(" external"); printk 85 arch/mips/mm/cerr-sb1.c printk("\n"); printk 92 arch/mips/mm/cerr-sb1.c printk(" load,"); printk 95 arch/mips/mm/cerr-sb1.c printk(" store,"); printk 98 arch/mips/mm/cerr-sb1.c printk(" fill/wb,"); printk 101 arch/mips/mm/cerr-sb1.c printk(" coherency,"); printk 104 arch/mips/mm/cerr-sb1.c printk(" duptags,"); printk 107 arch/mips/mm/cerr-sb1.c printk(" NO CAUSE,"); printk 111 arch/mips/mm/cerr-sb1.c printk(" NO TYPE"); printk 114 arch/mips/mm/cerr-sb1.c printk(" multi-err"); printk 116 arch/mips/mm/cerr-sb1.c printk(" tag-state"); printk 118 arch/mips/mm/cerr-sb1.c printk(" tag-address"); printk 120 arch/mips/mm/cerr-sb1.c printk(" data-SBE"); printk 122 arch/mips/mm/cerr-sb1.c printk(" data-DBE"); printk 124 arch/mips/mm/cerr-sb1.c printk(" external"); printk 126 arch/mips/mm/cerr-sb1.c printk("\n"); printk 147 arch/mips/mm/cerr-sb1.c printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); printk 148 arch/mips/mm/cerr-sb1.c printk("\nLast recorded signature:\n"); printk 149 arch/mips/mm/cerr-sb1.c printk("Request %02x from %d, answered by %d with Dcode %d\n", printk 155 arch/mips/mm/cerr-sb1.c printk("Last L2 tag w/ bad ECC: %016llx\n", l2_tag); printk 158 arch/mips/mm/cerr-sb1.c printk("Bus watcher indicates no error\n"); printk 173 arch/mips/mm/cerr-sb1.c printk("Trace buffer frozen\n"); printk 176 arch/mips/mm/cerr-sb1.c printk("Cache error exception on CPU %x:\n", printk 195 arch/mips/mm/cerr-sb1.c printk(" c0_errorepc == %08x\n", eepc); printk 196 arch/mips/mm/cerr-sb1.c printk(" c0_errctl == %08x", errctl); printk 199 arch/mips/mm/cerr-sb1.c printk(" c0_cerr_i == %08x", cerr_i); printk 205 arch/mips/mm/cerr-sb1.c printk(" cerr_i idx doesn't match eepc\n"); printk 210 arch/mips/mm/cerr-sb1.c printk("...didn't see indicated icache problem\n"); printk 215 arch/mips/mm/cerr-sb1.c printk(" c0_cerr_d == %08x", cerr_d); printk 218 arch/mips/mm/cerr-sb1.c printk(" c0_cerr_dpa == %010llx\n", cerr_dpa); printk 223 arch/mips/mm/cerr-sb1.c printk("...didn't see indicated dcache problem\n"); printk 226 arch/mips/mm/cerr-sb1.c printk(" cerr_d idx doesn't match cerr_dpa\n"); printk 231 arch/mips/mm/cerr-sb1.c printk("...didn't see indicated problem\n"); printk 329 arch/mips/mm/cerr-sb1.c printk("Icache index 0x%04x ", addr); printk 349 arch/mips/mm/cerr-sb1.c printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", printk 364 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in VTag0/G/ASID\n"); printk 368 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in R/VTag1\n"); printk 373 arch/mips/mm/cerr-sb1.c printk(" ** bad parity for valid bit\n"); printk 376 arch/mips/mm/cerr-sb1.c printk(" %d [VA %016llx] [Vld? %d] raw tags: %08X-%016llX\n", printk 402 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in predecode\n"); printk 407 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in instruction a\n"); printk 411 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in instruction b\n"); printk 414 arch/mips/mm/cerr-sb1.c printk(" %05X-%08X%08X", datahi, insta, instb); printk 416 arch/mips/mm/cerr-sb1.c printk("\n"); printk 484 arch/mips/mm/cerr-sb1.c printk("Dcache index 0x%04x ", addr); printk 504 arch/mips/mm/cerr-sb1.c printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", printk 514 arch/mips/mm/cerr-sb1.c printk(" %d [PA %010llx] [state %s (%02x)] raw tags: %08X-%016llX\n", printk 518 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in PTag1\n"); printk 522 arch/mips/mm/cerr-sb1.c printk(" ** bad parity in PTag0\n"); printk 559 arch/mips/mm/cerr-sb1.c printk(" %02X-%016llX", datahi, datalo); printk 561 arch/mips/mm/cerr-sb1.c printk("\n"); printk 563 arch/mips/mm/cerr-sb1.c printk(" dwords w/ bad ECC: %d %d %d %d\n", printk 52 arch/mips/mm/fault.c printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(), printk 243 arch/mips/mm/fault.c printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at " printk 272 arch/mips/mm/fault.c printk("do_page_fault() #3: sending SIGBUS to %s for " printk 414 arch/mips/mm/init.c printk(KERN_WARNING "This processor doesn't support highmem." printk 492 arch/mips/mm/init.c printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); printk 37 arch/mips/mm/ioremap.c printk("remap_area_pte: page already exists\n"); printk 200 arch/mips/mm/ioremap.c printk(KERN_ERR "iounmap: bad address %p\n", addr); printk 79 arch/mips/mm/sc-ip22.c printk("indy_sc_wback_invalidate[%08lx,%08lx]", addr, size); printk 107 arch/mips/mm/sc-ip22.c printk("Enabling R4600 SCACHE\n"); printk 137 arch/mips/mm/sc-ip22.c printk("Disabling R4600 SCACHE\n"); printk 169 arch/mips/mm/sc-ip22.c printk(KERN_INFO "R4600/R5000 SCACHE size %dK, linesize 32 bytes.\n", printk 89 arch/mips/mm/sc-r5k.c printk("R5000 SCACHE size %ldkB, linesize 32 bytes.\n", printk 242 arch/mips/mm/sc-rm7k.c printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n", printk 63 arch/mips/mm/tlb-r3k.c printk("[tlball]"); printk 81 arch/mips/mm/tlb-r3k.c printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", printk 119 arch/mips/mm/tlb-r3k.c printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end); printk 160 arch/mips/mm/tlb-r3k.c printk("[tlbpage<%lu,0x%08lx>]", cpu_context(cpu, vma->vm_mm), page); printk 198 arch/mips/mm/tlb-r3k.c printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%lu tlbpid=%d\n", printk 233 arch/mips/mm/tlb-r3k.c printk("[tlbwired<entry lo0 %8x, hi %8x\n, pagemask %8x>]\n", printk 257 arch/mips/mm/tlb-r3k.c printk("[tlbwired<entry lo0 %8x, hi %8x\n>]\n", printk 467 arch/mips/mm/tlb-r4k.c printk(KERN_WARNING printk 552 arch/mips/mm/tlb-r4k.c printk("Restricting TLB to %d entries\n", ntlb); printk 554 arch/mips/mm/tlb-r4k.c printk("Ignoring invalid argument ntlb=%d\n", ntlb); printk 239 arch/mips/mti-malta/malta-time.c printk("CPU frequency %d.%02d MHz\n", freq/1000000, printk 249 arch/mips/mti-malta/malta-time.c printk("GIC frequency %d.%02d MHz\n", freq/1000000, printk 137 arch/mips/oprofile/common.c printk(KERN_INFO "oprofile: using %s performance monitoring.\n", printk 336 arch/mips/oprofile/op_model_mipsxx.c printk(KERN_ERR "Oprofile: CPU has no performance counters\n"); printk 432 arch/mips/oprofile/op_model_mipsxx.c printk(KERN_ERR "Profiling unsupported for this CPU\n"); printk 46 arch/mips/pci/fixup-cobalt.c printk(KERN_INFO "Galileo: fixed bridge class\n"); printk 103 arch/mips/pci/fixup-cobalt.c printk(KERN_INFO "Galileo: revision %u\n", dev->revision); printk 144 arch/mips/pci/fixup-cobalt.c printk(KERN_INFO "Cobalt board ID: %d\n", cobalt_board_id); printk 65 arch/mips/pci/fixup-fuloong2e.c printk(KERN_INFO "via686b fix: ISA bridge\n"); printk 131 arch/mips/pci/fixup-fuloong2e.c printk(KERN_INFO"via686b fix: ISA bridge done\n"); printk 136 arch/mips/pci/fixup-fuloong2e.c printk(KERN_INFO"via686b fix: IDE\n"); printk 164 arch/mips/pci/fixup-fuloong2e.c printk(KERN_INFO"via686b fix: IDE done\n"); printk 57 arch/mips/pci/fixup-lemote2f.c printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin, printk 83 arch/mips/pci/fixup-lemote2f.c printk(KERN_INFO " strange pci slot number.\n"); printk 208 arch/mips/pci/fixup-pmcmsp.c printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n"); printk 210 arch/mips/pci/fixup-pmcmsp.c printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n", printk 447 arch/mips/pci/ops-bcm63xx.c printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " printk 452 arch/mips/pci/ops-bcm63xx.c printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", printk 14 arch/mips/pci/ops-mace.c # define DPRINTK(args...) printk(args); printk 917 arch/mips/pci/ops-pmcmsp.c printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id); printk 943 arch/mips/pci/ops-pmcmsp.c printk(KERN_WARNING "PCI: no host PCI bus detected\n"); printk 146 arch/mips/pci/ops-tx3927.c printk(KERN_INFO "TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s", printk 207 arch/mips/pci/ops-tx3927.c printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n", printk 209 arch/mips/pci/ops-tx3927.c printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", printk 230 arch/mips/pci/ops-tx3927.c printk(KERN_WARNING "Failed to request irq for PCIERR\n"); printk 228 arch/mips/pci/ops-tx4927.c printk(KERN_INFO printk 356 arch/mips/pci/ops-tx4927.c printk(KERN_DEBUG printk 396 arch/mips/pci/ops-tx4927.c printk(KERN_ERR ""); printk 398 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "pcistat:%04x(", pcistatus); printk 401 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "%s%s", printk 403 arch/mips/pci/ops-tx4927.c printk(KERN_CONT ") "); printk 406 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "g2pstatus:%08x(", g2pstatus); printk 409 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "%s%s", printk 411 arch/mips/pci/ops-tx4927.c printk(KERN_CONT ") "); printk 414 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "pcicstatus:%08x(", pcicstatus); printk 417 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "%s%s", printk 419 arch/mips/pci/ops-tx4927.c printk(KERN_CONT ")"); printk 421 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "\n"); printk 439 arch/mips/pci/ops-tx4927.c printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr); printk 442 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "\n"); printk 443 arch/mips/pci/ops-tx4927.c printk(KERN_INFO "%04x:", i); printk 450 arch/mips/pci/ops-tx4927.c printk(KERN_CONT " XXXXXXXX"); printk 453 arch/mips/pci/ops-tx4927.c printk(KERN_CONT " %08x", __raw_readl(preg)); printk 455 arch/mips/pci/ops-tx4927.c printk(KERN_CONT "\n"); printk 475 arch/mips/pci/ops-tx4927.c printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n", printk 517 arch/mips/pci/ops-tx4927.c printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n", printk 26 arch/mips/pci/pci-alchemy.c #define DBG(x...) printk(KERN_DEBUG x) printk 217 arch/mips/pci/pci-bcm1480.c printk printk 44 arch/mips/pci/pci-bcm47xx.c printk(KERN_ALERT "PCI: Failed to init device %s\n", printk 55 arch/mips/pci/pci-bcm47xx.c printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", printk 72 arch/mips/pci/pci-bcm47xx.c printk(KERN_ALERT "PCI: Failed to init device %s\n", printk 81 arch/mips/pci/pci-bcm47xx.c printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", printk 284 arch/mips/pci/pci-bcm63xx.c printk(KERN_WARNING "bcm63xx: this CPU " printk 39 arch/mips/pci/pci-ip32.c printk("MACEPCI: Master abort at 0x%08x (%c)\n", addr, s); printk 43 arch/mips/pci/pci-ip32.c printk("MACEPCI: Target abort at 0x%08x (%c)\n", addr, s); printk 47 arch/mips/pci/pci-ip32.c printk("MACEPCI: Data parity error at 0x%08x (%c)\n", addr, s); printk 51 arch/mips/pci/pci-ip32.c printk("MACEPCI: Retry error at 0x%08x (%c)\n", addr, s); printk 55 arch/mips/pci/pci-ip32.c printk("MACEPCI: Illegal command at 0x%08x (%c)\n", addr, s); printk 59 arch/mips/pci/pci-ip32.c printk("MACEPCI: System error at 0x%08x (%c)\n", addr, s); printk 63 arch/mips/pci/pci-ip32.c printk("MACEPCI: Parity error at 0x%08x (%c)\n", addr, s); printk 67 arch/mips/pci/pci-ip32.c printk("MACEPCI: Overrun error at 0x%08x (%c)\n", addr, s); printk 71 arch/mips/pci/pci-ip32.c printk("MACEPCI: Signaled target abort (clearing)\n"); printk 75 arch/mips/pci/pci-ip32.c printk("MACEPCI: Interrupt test triggered (clearing)\n"); printk 133 arch/mips/pci/pci-ip32.c printk("MACE PCI rev %d\n", mace->pci.rev); printk 40 arch/mips/pci/pci-lasat.c printk(KERN_DEBUG "PCI: starting\n"); printk 211 arch/mips/pci/pci-legacy.c printk(KERN_WARNING printk 228 arch/mips/pci/pci-legacy.c printk(KERN_WARNING printk 228 arch/mips/pci/pci-sb1250.c printk printk 143 arch/mips/pci/pci-vr41xx.c printk(KERN_ERR "PCI Clock is over 33MHz.\n"); printk 98 arch/mips/pmcs-msp71xx/msp_eth.c printk(KERN_INFO "device: %d, return value = %d\n", i, ret); printk 106 arch/mips/pmcs-msp71xx/msp_eth.c printk(KERN_WARNING "Could not initialize " printk 58 arch/mips/pmcs-msp71xx/msp_hwbutton.c printk(KERN_WARNING "SOFTRESET switch was pushed\n"); printk 72 arch/mips/pmcs-msp71xx/msp_hwbutton.c printk(KERN_WARNING "SOFTRESET switch was released\n"); printk 79 arch/mips/pmcs-msp71xx/msp_hwbutton.c printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n"); printk 86 arch/mips/pmcs-msp71xx/msp_hwbutton.c printk(KERN_WARNING printk 95 arch/mips/pmcs-msp71xx/msp_irq_slp.c printk(KERN_ERR "Spurious %s interrupt?\n", printk 151 arch/mips/pmcs-msp71xx/msp_prom.c printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name); printk 156 arch/mips/pmcs-msp71xx/msp_prom.c printk(KERN_WARNING "%s badly formatted-<%s>\n", printk 163 arch/mips/pmcs-msp71xx/msp_prom.c printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name); printk 165 arch/mips/pmcs-msp71xx/msp_prom.c printk(KERN_DEBUG "%02x:", printk 167 arch/mips/pmcs-msp71xx/msp_prom.c printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i)); printk 107 arch/mips/pmcs-msp71xx/msp_setup.c printk(KERN_WARNING "Now rebooting .......\n"); printk 126 arch/mips/pmcs-msp71xx/msp_setup.c printk(KERN_WARNING "\n** You can safely turn off the power\n"); printk 42 arch/mips/pmcs-msp71xx/msp_time.c printk(KERN_ERR printk 52 arch/mips/pmcs-msp71xx/msp_time.c printk(KERN_ERR printk 67 arch/mips/pmcs-msp71xx/msp_time.c printk(KERN_ERR printk 72 arch/mips/pmcs-msp71xx/msp_time.c printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate); printk 113 arch/mips/pnx833x/common/interrupts.c printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq); printk 300 arch/mips/pnx833x/common/interrupts.c printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency); printk 292 arch/mips/rb532/devices.c printk(KERN_ERR "rb532: cannot remap device controller 3\n"); printk 312 arch/mips/rb532/devices.c printk(KERN_INFO "korina mac = %s\n", s); printk 314 arch/mips/rb532/devices.c printk(KERN_ERR "Invalid mac\n"); printk 198 arch/mips/rb532/gpio.c printk(KERN_ERR "rb532: cannot remap GPIO register 0\n"); printk 117 arch/mips/rb532/prom.c printk(KERN_ERR "Unable to remap DDR register\n"); printk 55 arch/mips/rb532/setup.c printk(KERN_ERR "Could not remap PCI registers\n"); printk 44 arch/mips/rb532/time.c printk(KERN_INFO "calculating r4koff... "); printk 46 arch/mips/rb532/time.c printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); printk 51 arch/mips/rb532/time.c printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000, printk 48 arch/mips/sgi-ip22/ip22-berr.c printk(KERN_ERR "MC Bus Error\n"); printk 50 arch/mips/sgi-ip22/ip22-berr.c printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n", printk 57 arch/mips/sgi-ip22/ip22-berr.c printk(KERN_ERR "EISA Bus Error\n"); printk 59 arch/mips/sgi-ip22/ip22-berr.c printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n", printk 69 arch/mips/sgi-ip22/ip22-berr.c printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n", printk 96 arch/mips/sgi-ip22/ip22-berr.c printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", printk 87 arch/mips/sgi-ip22/ip22-eisa.c printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq); printk 106 arch/mips/sgi-ip22/ip22-eisa.c printk(KERN_INFO "EISA: bus not present.\n"); printk 110 arch/mips/sgi-ip22/ip22-eisa.c printk(KERN_INFO "EISA: Probing bus...\n"); printk 113 arch/mips/sgi-ip22/ip22-eisa.c printk(KERN_INFO "EISA: slot %d : %s detected.\n", printk 118 arch/mips/sgi-ip22/ip22-eisa.c printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s"); printk 120 arch/mips/sgi-ip22/ip22-eisa.c printk(KERN_INFO "ISA support compiled in.\n"); printk 364 arch/mips/sgi-ip22/ip22-gio.c printk(KERN_INFO "GIO: slot %d : %s (id %x)\n", printk 377 arch/mips/sgi-ip22/ip22-gio.c printk(KERN_INFO "GIO: slot %d : Empty\n", slotno); printk 411 arch/mips/sgi-ip22/ip22-gio.c printk(KERN_INFO "GIO: Probing bus...\n"); printk 57 arch/mips/sgi-ip22/ip22-mc.c printk(KERN_INFO "MC: Probing memory configuration:\n"); printk 65 arch/mips/sgi-ip22/ip22-mc.c printk(KERN_INFO " bank%d: %3ldM @ %08lx\n", printk 97 arch/mips/sgi-ip22/ip22-mc.c printk(KERN_CRIT "MC: Memory configuration mismatch " printk 116 arch/mips/sgi-ip22/ip22-mc.c printk(KERN_INFO "MC: SGI memory controller Revision %d\n", printk 193 arch/mips/sgi-ip22/ip22-reset.c printk(KERN_ERR "Allocation of front panel IRQ failed\n"); printk 83 arch/mips/sgi-ip22/ip22-time.c printk(KERN_INFO "Calibrating system timer... "); printk 95 arch/mips/sgi-ip22/ip22-time.c printk("warning: timer counts differ, retrying... "); printk 101 arch/mips/sgi-ip22/ip22-time.c printk("disagreement, using average... "); printk 108 arch/mips/sgi-ip22/ip22-time.c printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, printk 127 arch/mips/sgi-ip22/ip22-time.c printk(KERN_ALERT "Oops, got 8254 interrupt.\n"); printk 175 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "Cache tags @ %08x:\n", (unsigned)cache_tags.err_addr); printk 185 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR printk 196 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR printk 207 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n", printk 245 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "MC Bus Error\n"); printk 249 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n", printk 258 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "EISA Bus Error\n"); printk 262 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n", printk 274 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n", printk 288 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "MC: Hmm, didn't find any error condition.\n"); printk 290 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "CP0: config %08x, " printk 299 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ALERT "%s, epc == %0*lx, ra == %0*lx\n", printk 412 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:" printk 419 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "at GIO DMA: mem address 0x%08x.\n", printk 424 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "at GIO DMA: gio address 0x%08x.\n", printk 431 arch/mips/sgi-ip22/ip28-berr.c printk(KERN_ERR "discarded!\n"); printk 36 arch/mips/sgi-ip27/ip27-berr.c printk("Hub does not contain valid error information\n"); printk 41 arch/mips/sgi-ip27/ip27-berr.c printk("Hub has valid error information:\n"); printk 43 arch/mips/sgi-ip27/ip27-berr.c printk("Overrun is set. Error stack may contain additional " printk 45 arch/mips/sgi-ip27/ip27-berr.c printk("Hub error address is %08lx\n", printk 47 arch/mips/sgi-ip27/ip27-berr.c printk("Incoming message command 0x%lx\n", printk 49 arch/mips/sgi-ip27/ip27-berr.c printk("Supplemental field of incoming message is 0x%lx\n", printk 51 arch/mips/sgi-ip27/ip27-berr.c printk("T5 Rn (for RRB only) is 0x%lx\n", printk 53 arch/mips/sgi-ip27/ip27-berr.c printk("Error type is %s\n", err_type[wrb] printk 67 arch/mips/sgi-ip27/ip27-berr.c printk("Slice %c got %cbe at 0x%lx\n", 'A' + cpu, data ? 'd' : 'i', printk 69 arch/mips/sgi-ip27/ip27-berr.c printk("Hub information:\n"); printk 70 arch/mips/sgi-ip27/ip27-berr.c printk("ERR_INT_PEND = 0x%06llx\n", LOCAL_HUB_L(PI_ERR_INT_PEND)); printk 39 arch/mips/sgi-ip27/ip27-hubio.c printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx" printk 71 arch/mips/sgi-ip27/ip27-hubio.c printk(KERN_WARNING "unable to establish PIO mapping for at" printk 137 arch/mips/sgi-ip27/ip27-init.c printk("IP27: Running on node %d.\n", nid); printk 141 arch/mips/sgi-ip27/ip27-init.c printk("Node %d has %s primary CPU%s.\n", nid, printk 147 arch/mips/sgi-ip27/ip27-init.c printk("Node %d has %s secondary CPU%s.\n", nid, printk 156 arch/mips/sgi-ip27/ip27-init.c printk("Machine is in %c mode.\n", n_mode ? 'N' : 'M'); printk 30 arch/mips/sgi-ip27/ip27-klconfig.c printk("find_component: Bad pointer: 0x%p\n", kli); printk 109 arch/mips/sgi-ip27/ip27-klconfig.c printk("sn_get_cpuinfo: illegal cpuid 0x%lx\n", cpu); printk 69 arch/mips/sgi-ip27/ip27-klnuma.c printk("REPLICATION: ON nasid %d, ktext from nasid %d, kdata from nasid %d\n", client_nasid, server_nasid, master_nasid); printk 42 arch/mips/sgi-ip27/ip27-reset.c printk("Reboot started from CPU %d\n", smp_processor_id()); printk 131 arch/mips/sgi-ip27/ip27-smp.c printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes()); printk 170 arch/mips/sgi-ip27/ip27-timer.c printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); printk 38 arch/mips/sgi-ip32/crime.c printk(KERN_INFO "CRIME id %1x rev %d at 0x%0*lx\n", printk 50 arch/mips/sgi-ip32/crime.c printk("CRIME memory error at 0x%08lx ST 0x%08lx<", addr, stat); printk 53 arch/mips/sgi-ip32/crime.c printk("INV,"); printk 59 arch/mips/sgi-ip32/crime.c printk("ECC,SYN=0x%08lx,GEN=0x%08lx,", ecc_syn, ecc_gen); printk 63 arch/mips/sgi-ip32/crime.c printk("MULTIPLE,"); printk 67 arch/mips/sgi-ip32/crime.c printk("HARD,"); printk 70 arch/mips/sgi-ip32/crime.c printk("SOFT,"); printk 72 arch/mips/sgi-ip32/crime.c printk("CPU,"); printk 74 arch/mips/sgi-ip32/crime.c printk("VICE,"); printk 76 arch/mips/sgi-ip32/crime.c printk("GBE,"); printk 78 arch/mips/sgi-ip32/crime.c printk("RE,REID=0x%02lx,", (stat & CRIME_MEM_ERROR_RE_ID)>>8); printk 80 arch/mips/sgi-ip32/crime.c printk("MACE,MACEID=0x%02lx,", stat & CRIME_MEM_ERROR_MACE_ID); printk 85 arch/mips/sgi-ip32/crime.c printk("FATAL>\n"); printk 88 arch/mips/sgi-ip32/crime.c printk("NONFATAL>\n"); printk 99 arch/mips/sgi-ip32/crime.c printk("CRIME CPU error at 0x%09lx status 0x%08lx\n", addr, stat); printk 28 arch/mips/sgi-ip32/ip32-berr.c printk("Got %cbe at 0x%lx\n", data ? 'd' : 'i', regs->cp0_epc); printk 343 arch/mips/sgi-ip32/ip32-irq.c printk("Unknown interrupt occurred!\n"); printk 344 arch/mips/sgi-ip32/ip32-irq.c printk("cp0_status: %08x\n", read_c0_status()); printk 345 arch/mips/sgi-ip32/ip32-irq.c printk("cp0_cause: %08x\n", read_c0_cause()); printk 346 arch/mips/sgi-ip32/ip32-irq.c printk("CRIME intr mask: %016lx\n", crime->imask); printk 347 arch/mips/sgi-ip32/ip32-irq.c printk("CRIME intr status: %016lx\n", crime->istat); printk 348 arch/mips/sgi-ip32/ip32-irq.c printk("CRIME hardware intr register: %016lx\n", crime->hard_int); printk 349 arch/mips/sgi-ip32/ip32-irq.c printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask); printk 350 arch/mips/sgi-ip32/ip32-irq.c printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat); printk 351 arch/mips/sgi-ip32/ip32-irq.c printk("MACE PCI control register: %08x\n", mace->pci.control); printk 353 arch/mips/sgi-ip32/ip32-irq.c printk("Register dump:\n"); printk 356 arch/mips/sgi-ip32/ip32-irq.c printk("Please mail this report to linux-mips@linux-mips.org\n"); printk 357 arch/mips/sgi-ip32/ip32-irq.c printk("Spinning..."); printk 39 arch/mips/sgi-ip32/ip32-memory.c printk("CRIME MC: bank %u base 0x%016Lx size %LuMiB\n", printk 70 arch/mips/sgi-ip32/ip32-setup.c printk(KERN_INFO "Calibrating system timer... "); printk 75 arch/mips/sgi-ip32/ip32-setup.c printk("%d MHz CPU detected\n", mips_hpt_frequency * 2 / 1000000); printk 61 arch/mips/sibyte/bcm1480/setup.c printk("Unknown %s rev %x\n", soc_str, soc_pass); printk 98 arch/mips/sibyte/bcm1480/setup.c printk("Unknown part type %x\n", part_type); printk 118 arch/mips/sibyte/bcm1480/setup.c printk("Restart after failure to identify SiByte chip\n"); printk 125 arch/mips/sibyte/bcm1480/setup.c printk("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n", printk 127 arch/mips/sibyte/bcm1480/setup.c printk("Board type: %s\n", get_system_type()); printk 115 arch/mips/sibyte/bcm1480/smp.c printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); printk 141 arch/mips/sibyte/bcm1480/smp.c printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); printk 50 arch/mips/sibyte/common/bus_watcher.c printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); printk 51 arch/mips/sibyte/common/bus_watcher.c printk("\nLast recorded signature:\n"); printk 52 arch/mips/sibyte/common/bus_watcher.c printk("Request %02x from %d, answered by %d with Dcode %d\n", printk 82 arch/mips/sibyte/common/bus_watcher.c printk("Using last values reaped by bus watcher driver\n"); printk 93 arch/mips/sibyte/common/bus_watcher.c printk("Bus watcher indicates no error\n"); printk 139 arch/mips/sibyte/common/bus_watcher.c printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n"); printk 165 arch/mips/sibyte/common/bus_watcher.c printk("%016llx\n", printk 198 arch/mips/sibyte/common/bus_watcher.c printk("Failed to register bus watcher BAD_ECC irq\n"); printk 203 arch/mips/sibyte/common/bus_watcher.c printk("Failed to register bus watcher COR_ECC irq\n"); printk 209 arch/mips/sibyte/common/bus_watcher.c printk("Failed to register bus watcher IO_BUS irq\n"); printk 64 arch/mips/sibyte/common/cfe.c printk("Passing control back to CFE...\n"); printk 66 arch/mips/sibyte/common/cfe.c printk("cfe_exit returned??\n"); printk 209 arch/mips/sibyte/common/cfe.c printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start); printk 212 arch/mips/sibyte/common/cfe.c printk("Bad initrd argument. Disabling initrd\n"); printk 269 arch/mips/sibyte/common/cfe.c printk("CFE's entrypoint seal doesn't match. Spinning."); printk 282 arch/mips/sibyte/common/cfe.c printk("LINUX_CMDLINE not defined in cfe."); printk 243 arch/mips/sibyte/common/sb_tbprof.c printk(DEVNAME ": unexpected pc_intr"); printk 548 arch/mips/sibyte/common/sb_tbprof.c printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n", printk 70 arch/mips/sibyte/sb1250/setup.c printk("Unknown BCM1250 rev %x\n", soc_pass); printk 126 arch/mips/sibyte/sb1250/setup.c printk("Unknown %s rev %x\n", soc_str, soc_pass); printk 160 arch/mips/sibyte/sb1250/setup.c printk("Unknown SOC type %x\n", soc_type); printk 180 arch/mips/sibyte/sb1250/setup.c printk("Restart after failure to identify SiByte chip\n"); printk 187 arch/mips/sibyte/sb1250/setup.c printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n", printk 189 arch/mips/sibyte/sb1250/setup.c printk("Board type: %s\n", get_system_type()); printk 193 arch/mips/sibyte/sb1250/setup.c printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, " printk 202 arch/mips/sibyte/sb1250/setup.c printk("@@@@ This is a BCM1250 A3-A10 board, and the " printk 208 arch/mips/sibyte/sb1250/setup.c printk("@@@@ Prefetches may be enabled in this kernel, " printk 215 arch/mips/sibyte/sb1250/setup.c printk("@@@@ This is a BCM1250 B1/B2. board, and the " printk 222 arch/mips/sibyte/sb1250/setup.c printk("@@@@ This is a BCM1250 B1/B2, but the kernel is " printk 231 arch/mips/sibyte/sb1250/setup.c printk("Invalid configuration for this chip.\n"); printk 104 arch/mips/sibyte/sb1250/smp.c printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); printk 130 arch/mips/sibyte/sb1250/smp.c printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); printk 63 arch/mips/sibyte/swarm/setup.c printk("DBE physical address: %010Lx\n", printk 26 arch/mips/sibyte/swarm/swarm-i2c.c printk(KERN_ERR printk 32 arch/mips/sni/pcimt.c printk("Second level cache is deactivated.\n"); printk 36 arch/mips/sni/pcimt.c printk("Invalid second level cache size configured, " printk 43 arch/mips/sni/pcimt.c printk("%dkb second level cache detected, deactivating.\n", sc_size); printk 67 arch/mips/sni/pcimt.c printk("%s.\n", boardtype); printk 269 arch/mips/sni/rm200.c printk(KERN_DEBUG printk 103 arch/mips/sni/setup.c printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i)); printk 106 arch/mips/sni/setup.c printk("\n"); printk 133 arch/mips/sni/time.c printk(KERN_INFO "Calibrating system timer... "); printk 145 arch/mips/sni/time.c printk("warning: timer counts differ, retrying... "); printk 151 arch/mips/sni/time.c printk("disagreement, using average... "); printk 158 arch/mips/sni/time.c printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, printk 68 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); printk 111 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "Unknown PClock speed for NEC VR4133\n"); printk 116 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); printk 120 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "PClock: %ldHz\n", pclock); printk 142 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "VTClock: %ldHz\n", vtclock); printk 151 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "VTClock: %ldHz\n", vtclock); printk 156 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "VTClock: %ldHz\n", vtclock); printk 159 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); printk 189 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); printk 193 arch/mips/vr41xx/common/bcu.c printk(KERN_INFO "TClock: %ldHz\n", tclock); printk 641 arch/mips/vr41xx/common/icu.c printk(KERN_ERR "spurious ICU interrupt: %04x,%04x\n", pend1, pend2); printk 666 arch/mips/vr41xx/common/icu.c printk(KERN_ERR "ICU: Unexpected CPU of NEC VR4100 series\n"); printk 81 arch/mips/vr41xx/common/pmu.c printk(KERN_NOTICE "\nYou can turn off the power supply\n"); printk 102 arch/mips/vr41xx/common/pmu.c printk("Unexpected CPU of NEC VR4100 series\n"); printk 98 arch/nds32/kernel/process.c printk("PC is at %pS\n", (void *)instruction_pointer(regs)); printk 99 arch/nds32/kernel/process.c printk("LP is at %pS\n", (void *)regs->lp); printk 405 arch/openrisc/include/asm/pgtable.h printk(KERN_ERR "%s:%d: bad pte %p(%08lx).\n", \ printk 408 arch/openrisc/include/asm/pgtable.h printk(KERN_ERR "%s:%d: bad pgd %p(%08lx).\n", \ printk 55 arch/openrisc/kernel/process.c printk(KERN_INFO "*** MACHINE RESTART ***\n"); printk 66 arch/openrisc/kernel/process.c printk(KERN_INFO "*** MACHINE HALT ***\n"); printk 73 arch/openrisc/kernel/process.c printk(KERN_INFO "*** MACHINE POWER OFF ***\n"); printk 60 arch/openrisc/kernel/setup.c printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__, printk 103 arch/openrisc/kernel/setup.c printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n", printk 107 arch/openrisc/kernel/setup.c printk(KERN_INFO printk 113 arch/openrisc/kernel/setup.c printk(KERN_INFO printk 118 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- dcache disabled\n"); printk 120 arch/openrisc/kernel/setup.c printk(KERN_INFO printk 125 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- icache disabled\n"); printk 128 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n", printk 132 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n", printk 136 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- additional features:\n"); printk 138 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- debug unit\n"); printk 140 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- performance counters\n"); printk 142 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- power management\n"); printk 144 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- PIC\n"); printk 146 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- timer\n"); printk 148 arch/openrisc/kernel/setup.c printk(KERN_INFO "-- custom unit(s)\n"); printk 194 arch/openrisc/kernel/setup.c printk(KERN_WARNING printk 246 arch/openrisc/kernel/setup.c printk("%s", text); printk 252 arch/openrisc/kernel/setup.c printk("present\n"); printk 254 arch/openrisc/kernel/setup.c printk("not present\n"); printk 318 arch/openrisc/kernel/setup.c printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n"); printk 75 arch/openrisc/kernel/traps.c printk("CPU #: %d\n" printk 78 arch/openrisc/kernel/traps.c printk("GPR00: %08lx GPR01: %08lx GPR02: %08lx GPR03: %08lx\n", printk 80 arch/openrisc/kernel/traps.c printk("GPR04: %08lx GPR05: %08lx GPR06: %08lx GPR07: %08lx\n", printk 82 arch/openrisc/kernel/traps.c printk("GPR08: %08lx GPR09: %08lx GPR10: %08lx GPR11: %08lx\n", printk 84 arch/openrisc/kernel/traps.c printk("GPR12: %08lx GPR13: %08lx GPR14: %08lx GPR15: %08lx\n", printk 86 arch/openrisc/kernel/traps.c printk("GPR16: %08lx GPR17: %08lx GPR18: %08lx GPR19: %08lx\n", printk 88 arch/openrisc/kernel/traps.c printk("GPR20: %08lx GPR21: %08lx GPR22: %08lx GPR23: %08lx\n", printk 90 arch/openrisc/kernel/traps.c printk("GPR24: %08lx GPR25: %08lx GPR26: %08lx GPR27: %08lx\n", printk 92 arch/openrisc/kernel/traps.c printk("GPR28: %08lx GPR29: %08lx GPR30: %08lx GPR31: %08lx\n", printk 94 arch/openrisc/kernel/traps.c printk(" RES: %08lx oGPR11: %08lx\n", printk 97 arch/openrisc/kernel/traps.c printk("Process %s (pid: %d, stackpage=%08lx)\n", printk 105 arch/openrisc/kernel/traps.c printk("\nStack: "); printk 108 arch/openrisc/kernel/traps.c printk("\nCode: "); printk 116 arch/openrisc/kernel/traps.c printk(" Bad PC value."); printk 121 arch/openrisc/kernel/traps.c printk("(%02x) ", c); printk 123 arch/openrisc/kernel/traps.c printk("%02x ", c); printk 126 arch/openrisc/kernel/traps.c printk("\n"); printk 135 arch/openrisc/kernel/traps.c printk("\n\r[nommu_dump_state] :: ea %lx, vector %lx\n\r", ea, vector); printk 137 arch/openrisc/kernel/traps.c printk("CPU #: %d\n" printk 140 arch/openrisc/kernel/traps.c printk("GPR00: %08lx GPR01: %08lx GPR02: %08lx GPR03: %08lx\n", printk 142 arch/openrisc/kernel/traps.c printk("GPR04: %08lx GPR05: %08lx GPR06: %08lx GPR07: %08lx\n", printk 144 arch/openrisc/kernel/traps.c printk("GPR08: %08lx GPR09: %08lx GPR10: %08lx GPR11: %08lx\n", printk 146 arch/openrisc/kernel/traps.c printk("GPR12: %08lx GPR13: %08lx GPR14: %08lx GPR15: %08lx\n", printk 148 arch/openrisc/kernel/traps.c printk("GPR16: %08lx GPR17: %08lx GPR18: %08lx GPR19: %08lx\n", printk 150 arch/openrisc/kernel/traps.c printk("GPR20: %08lx GPR21: %08lx GPR22: %08lx GPR23: %08lx\n", printk 152 arch/openrisc/kernel/traps.c printk("GPR24: %08lx GPR25: %08lx GPR26: %08lx GPR27: %08lx\n", printk 154 arch/openrisc/kernel/traps.c printk("GPR28: %08lx GPR29: %08lx GPR30: %08lx GPR31: %08lx\n", printk 156 arch/openrisc/kernel/traps.c printk(" RES: %08lx oGPR11: %08lx\n", printk 159 arch/openrisc/kernel/traps.c printk("Process %s (pid: %d, stackpage=%08lx)\n", printk 164 arch/openrisc/kernel/traps.c printk("\nStack: "); printk 165 arch/openrisc/kernel/traps.c printk("Stack dump [0x%08lx]:\n", (unsigned long)stack); printk 171 arch/openrisc/kernel/traps.c printk("%lx :: sp + %02d: 0x%08lx\n", stack, i * 4, printk 174 arch/openrisc/kernel/traps.c printk("\n"); printk 176 arch/openrisc/kernel/traps.c printk("Call Trace: "); printk 184 arch/openrisc/kernel/traps.c printk("\n "); printk 185 arch/openrisc/kernel/traps.c printk(" [<%08lx>]", addr); printk 189 arch/openrisc/kernel/traps.c printk("\n"); printk 191 arch/openrisc/kernel/traps.c printk("\nCode: "); printk 198 arch/openrisc/kernel/traps.c printk("(%02x) ", c); printk 200 arch/openrisc/kernel/traps.c printk("%02x ", c); printk 202 arch/openrisc/kernel/traps.c printk("\n"); printk 210 arch/openrisc/kernel/traps.c printk("\n%s#: %04lx\n", str, err & 0xffff); printk 213 arch/openrisc/kernel/traps.c printk("\n\nUNHANDLED_EXCEPTION: entering infinite loop\n"); printk 235 arch/openrisc/kernel/traps.c printk("Unable to handle exception at EA =0x%x, vector 0x%x", printk 258 arch/openrisc/kernel/traps.c printk("KERNEL: Unaligned Access 0x%.8lx\n", address); printk 271 arch/openrisc/kernel/traps.c printk("KERNEL: Bus error (SIGBUS) 0x%.8lx\n", address); printk 466 arch/openrisc/kernel/traps.c printk("KERNEL: Illegal instruction (SIGILL) 0x%.8lx\n", printk 245 arch/openrisc/mm/fault.c printk(KERN_ALERT printk 248 arch/openrisc/mm/fault.c printk(KERN_ALERT "Unable to handle kernel access"); printk 249 arch/openrisc/mm/fault.c printk(" at virtual address 0x%08lx\n", address); printk 124 arch/openrisc/mm/init.c printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__, printk 136 arch/openrisc/mm/init.c printk(KERN_INFO "Setting up paging and PTEs.\n"); printk 168 arch/openrisc/mm/init.c printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler); printk 177 arch/openrisc/mm/init.c printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler); printk 217 arch/openrisc/mm/init.c printk("mem_init_done ...........................................\n"); printk 102 arch/parisc/include/asm/floppy.h printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", printk 209 arch/parisc/include/asm/floppy.h printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); printk 103 arch/parisc/include/asm/pgtable.h printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) printk 105 arch/parisc/include/asm/pgtable.h printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, (unsigned long)pmd_val(e)) printk 107 arch/parisc/include/asm/pgtable.h printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e)) printk 156 arch/parisc/kernel/cache.c printk("ic_size %lx dc_size %lx it_size %lx\n", printk 161 arch/parisc/kernel/cache.c printk("DC base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx\n", printk 167 arch/parisc/kernel/cache.c printk("dc_conf = 0x%lx alias %d blk %d line %d shift %d\n", printk 173 arch/parisc/kernel/cache.c printk(" wt %d sh %d cst %d hv %d\n", printk 179 arch/parisc/kernel/cache.c printk("IC base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx\n", printk 185 arch/parisc/kernel/cache.c printk("IT base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx off_base 0x%lx off_stride 0x%lx off_count 0x%lx\n", printk 194 arch/parisc/kernel/cache.c printk("DT base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx off_base 0x%lx off_stride 0x%lx off_count 0x%lx\n", printk 203 arch/parisc/kernel/cache.c printk("ic_conf = 0x%lx alias %d blk %d line %d shift %d\n", printk 209 arch/parisc/kernel/cache.c printk(" wt %d sh %d cst %d hv %d\n", printk 215 arch/parisc/kernel/cache.c printk("D-TLB conf: sh %d page %d cst %d aid %d sr %d\n", printk 222 arch/parisc/kernel/cache.c printk("I-TLB conf: sh %d page %d cst %d aid %d sr %d\n", printk 233 arch/parisc/kernel/cache.c printk(KERN_WARNING "Unexpected TLB configuration. " printk 258 arch/parisc/kernel/cache.c printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n"); printk 369 arch/parisc/kernel/cache.c printk(KERN_ERR "INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %pD\n", old_addr, addr, mpnt->vm_file); printk 404 arch/parisc/kernel/cache.c printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n", printk 412 arch/parisc/kernel/cache.c printk(KERN_INFO "Cache flush threshold set to %lu KiB\n", printk 440 arch/parisc/kernel/cache.c printk(KERN_INFO "Whole TLB flush %lu cycles, Range flush %lu bytes %lu cycles\n", printk 444 arch/parisc/kernel/cache.c printk(KERN_INFO "Calculated TLB flush threshold %lu KiB\n", printk 450 arch/parisc/kernel/cache.c printk(KERN_INFO "TLB flush threshold set to %lu KiB\n", printk 59 arch/parisc/kernel/inventory.c printk(KERN_INFO "Determining PDC firmware type: "); printk 241 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n", printk 246 arch/parisc/kernel/inventory.c printk(KERN_DEBUG printk 252 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc); printk 256 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "PAT_ENTITY_PBC: "); printk 260 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "PAT_ENTITY_SBA: "); printk 264 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "PAT_ENTITY_LBA: "); printk 269 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]); printk 271 arch/parisc/kernel/inventory.c printk(KERN_DEBUG printk 276 arch/parisc/kernel/inventory.c printk(KERN_DEBUG printk 282 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "\n"); printk 324 arch/parisc/kernel/inventory.c printk("\n\n\n"); printk 325 arch/parisc/kernel/inventory.c printk(KERN_WARNING "WARNING! Could not get full memory configuration. " printk 334 arch/parisc/kernel/inventory.c printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); printk 335 arch/parisc/kernel/inventory.c printk(KERN_WARNING "Some memory may not be used!\n"); printk 358 arch/parisc/kernel/inventory.c printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); printk 359 arch/parisc/kernel/inventory.c printk(KERN_WARNING "Some memory will not be used!\n"); printk 384 arch/parisc/kernel/inventory.c printk(KERN_DEBUG "CELL_GET_NUMBER: 0x%lx 0x%lx\n", cell_info.cell_num, printk 422 arch/parisc/kernel/inventory.c printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); printk 423 arch/parisc/kernel/inventory.c printk(KERN_WARNING "Some memory will not be used!\n"); printk 527 arch/parisc/kernel/inventory.c printk(KERN_ERR "%s %s(): memory allocation failure\n", printk 539 arch/parisc/kernel/inventory.c printk(KERN_WARNING printk 607 arch/parisc/kernel/inventory.c printk(KERN_WARNING "Bad memory configuration returned!\n"); printk 608 arch/parisc/kernel/inventory.c printk(KERN_WARNING "Some memory may not be used!\n"); printk 615 arch/parisc/kernel/inventory.c printk(KERN_INFO "Searching for devices...\n"); printk 636 arch/parisc/kernel/inventory.c printk(KERN_INFO "Found devices:\n"); printk 538 arch/parisc/kernel/irq.c printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n", printk 63 arch/parisc/kernel/module.c printk(KERN_ERR "module %s relocation of symbol %s is out of range (0x%lx in %d bits)\n", \ printk 395 arch/parisc/kernel/module.c printk(KERN_ERR "%s: zero OPD requested!\n", me->name); printk 548 arch/parisc/kernel/module.c printk(KERN_WARNING "%s: Unknown symbol %s\n", printk 653 arch/parisc/kernel/module.c printk(KERN_ERR "module %s: Unknown relocation: %u\n", printk 692 arch/parisc/kernel/module.c printk(KERN_WARNING "%s: Unknown symbol %s\n", printk 705 arch/parisc/kernel/module.c printk("Symbol %s loc %p val 0x%Lx addend 0x%Lx: %s\n", printk 821 arch/parisc/kernel/module.c printk(KERN_ERR "module %s: Unknown relocation: %Lu\n", printk 873 arch/parisc/kernel/module.c printk("FINALIZE, ->init FPTR is %p, GP %lx ADDR %lx\n", entry, printk 876 arch/parisc/kernel/module.c printk("INSNS: %x %x %x %x\n", printk 878 arch/parisc/kernel/module.c printk("got entries used %ld, gots max %ld\n" printk 906 arch/parisc/kernel/module.c printk(KERN_ERR "%s: Global Offset Table overflow (used %ld, allowed %d)\n", printk 34 arch/parisc/kernel/pa7300lc.c printk(KERN_WARNING "LPMC on CPU %d\n", smp_processor_id()); printk 39 arch/parisc/kernel/pa7300lc.c printk(KERN_WARNING printk 50 arch/parisc/kernel/pci-dma.c #define DBG_RES(x...) printk(x) printk 67 arch/parisc/kernel/pci-dma.c printk("res_map: "); printk 69 arch/parisc/kernel/pci-dma.c printk("%08lx ", *res_ptr); printk 71 arch/parisc/kernel/pci-dma.c printk("\n"); printk 92 arch/parisc/kernel/pci-dma.c printk(KERN_ERR "map_pte_uncached: page already exists\n"); printk 181 arch/parisc/kernel/pci-dma.c printk(KERN_CRIT "Whee.. Swapped out page in kernel page table\n"); printk 382 arch/parisc/kernel/pci-dma.c printk(KERN_WARNING printk 389 arch/parisc/kernel/pci-dma.c printk(KERN_WARNING printk 25 arch/parisc/kernel/pci.c # define DBGC(x...) printk(KERN_DEBUG x) printk 32 arch/parisc/kernel/pci.c #define DBG_RES(x...) printk(KERN_DEBUG x) printk 110 arch/parisc/kernel/pci.c printk(KERN_WARNING "pci_bios != NULL but init() is!\n"); printk 126 arch/parisc/kernel/pci.c printk(KERN_WARNING "pci_bios != NULL but fixup_bus() is!\n"); printk 260 arch/parisc/kernel/pci.c printk(KERN_ERR "PCI: Too many Host Bus Adapters\n"); printk 15 arch/parisc/kernel/pdc_chassis.c #define DPRINTK(fmt, args...) printk(fmt, ## args) printk 132 arch/parisc/kernel/pdc_chassis.c printk(KERN_INFO "Enabling %s chassis codes support v%s\n", printk 265 arch/parisc/kernel/pdc_chassis.c printk(KERN_INFO "Chassis warnings not supported.\n"); printk 269 arch/parisc/kernel/pdc_chassis.c printk(KERN_INFO "Enabling PDC chassis warnings support v%s\n", printk 162 arch/parisc/kernel/pdc_cons.c printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name); printk 166 arch/parisc/kernel/pdc_cons.c printk(KERN_INFO "The PDC console driver is still registered, removing CON_BOOT flag\n"); printk 189 arch/parisc/kernel/pdc_cons.c printk(KERN_ERR "Unable to register the PDC console TTY driver\n"); printk 238 arch/parisc/kernel/pdc_cons.c printk(KERN_INFO "Initialized PDC Console for debugging.\n"); printk 223 arch/parisc/kernel/perf.c printk("perf_config: perf_stop_counters = %ld\n", error); printk 227 arch/parisc/kernel/perf.c printk("Preparing to write image\n"); printk 231 arch/parisc/kernel/perf.c printk("perf_config: DOWNLOAD = %ld\n", error); printk 235 arch/parisc/kernel/perf.c printk("Preparing to start counters\n"); printk 443 arch/parisc/kernel/perf.c printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start); printk 509 arch/parisc/kernel/perf.c printk("Performance monitoring counters not supported on this processor\n"); printk 515 arch/parisc/kernel/perf.c printk(KERN_ERR "Performance monitoring counters: " printk 525 arch/parisc/kernel/perf.c printk("Performance monitoring counters enabled for %s\n", printk 791 arch/parisc/kernel/perf.c printk(KERN_ERR "write_image: cpu_device not yet initialized!\n"); printk 825 arch/parisc/kernel/perf.c printk("perf_rdr_write\n"); printk 837 arch/parisc/kernel/perf.c printk("perf_rdr_write done\n"); printk 127 arch/parisc/kernel/process.c printk(KERN_EMERG "System shut down completed.\n" printk 88 arch/parisc/kernel/processor.c printk(KERN_INFO "num_online_cpus() >= nr_cpu_ids\n"); printk 93 arch/parisc/kernel/processor.c printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n"); printk 145 arch/parisc/kernel/processor.c printk(KERN_WARNING "IGNORING CPU at %pa," printk 243 arch/parisc/kernel/processor.c printk(KERN_INFO printk 253 arch/parisc/kernel/processor.c printk(KERN_INFO "vers %08lx\n", printk 261 arch/parisc/kernel/processor.c printk(KERN_INFO "CPUID vers %ld rev %ld (0x%08lx)\n", printk 271 arch/parisc/kernel/processor.c printk(KERN_INFO "capabilities 0x%lx\n", printk 275 arch/parisc/kernel/processor.c printk(KERN_INFO "model %s\n", printk 293 arch/parisc/kernel/processor.c printk(KERN_INFO "product %s, original product %s, S/N: %s\n", printk 341 arch/parisc/kernel/processor.c printk(KERN_INFO "FP[%d] enabled: Rev %ld Model %ld\n", printk 351 arch/parisc/kernel/processor.c printk(KERN_WARNING "WARNING: No FP CoProcessor?!" printk 108 arch/parisc/kernel/setup.c printk(KERN_INFO "The 64-bit Kernel has started...\n"); printk 110 arch/parisc/kernel/setup.c printk(KERN_INFO "The 32-bit Kernel has started...\n"); printk 113 arch/parisc/kernel/setup.c printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ", printk 116 arch/parisc/kernel/setup.c printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size", printk 119 arch/parisc/kernel/setup.c printk(KERN_CONT "disabled"); printk 121 arch/parisc/kernel/setup.c printk(KERN_CONT ".\n"); printk 135 arch/parisc/kernel/setup.c printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n"); printk 266 arch/parisc/kernel/setup.c printk(KERN_ERR printk 274 arch/parisc/kernel/setup.c printk(KERN_ERR printk 282 arch/parisc/kernel/setup.c printk(KERN_ERR printk 47 arch/parisc/kernel/signal.c ? printk(__VA_ARGS__) : (void) 0) printk 30 arch/parisc/kernel/signal32.c ? printk(__VA_ARGS__) : (void) 0) printk 54 arch/parisc/kernel/smp.c printk(printargs); printk 174 arch/parisc/kernel/smp.c printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n", printk 271 arch/parisc/kernel/smp.c printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum); printk 339 arch/parisc/kernel/smp.c printk(KERN_INFO "Releasing cpu %d now, hpa=%lx\n", cpuid, p->hpa); printk 368 arch/parisc/kernel/smp.c printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid); printk 383 arch/parisc/kernel/smp.c printk(KERN_INFO "SMP: bootstrap CPU ID is %d\n", bootstrap_processor); printk 406 arch/parisc/kernel/smp.c printk(KERN_INFO "SMP mode deactivated.\n"); printk 22 arch/parisc/kernel/sys_parisc32.c printk(KERN_ERR "%s(%d): Unimplemented 32 on 64 syscall #%d!\n", printk 215 arch/parisc/kernel/time.c printk(KERN_ERR "Error reading tod clock\n"); printk 74 arch/parisc/kernel/traps.c printk("%s%s%02d-%02d " fmt " " fmt " " fmt " " fmt "\n", \ printk 83 arch/parisc/kernel/traps.c printk("%s\n", level); printk 84 arch/parisc/kernel/traps.c printk("%s YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI\n", level); printk 86 arch/parisc/kernel/traps.c printk("%sPSW: %s %s\n", level, buf, print_tainted()); printk 108 arch/parisc/kernel/traps.c printk("%s\n", level); printk 109 arch/parisc/kernel/traps.c printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level); printk 111 arch/parisc/kernel/traps.c printk("%sFPSR: %s\n", level, buf); printk 112 arch/parisc/kernel/traps.c printk("%sFPER1: %08x\n", level, s.sw[1]); printk 140 arch/parisc/kernel/traps.c printk("%s\n", level); printk 141 arch/parisc/kernel/traps.c printk("%sIASQ: " RFMT " " RFMT " IAOQ: " RFMT " " RFMT "\n", printk 143 arch/parisc/kernel/traps.c printk("%s IIR: %08lx ISR: " RFMT " IOR: " RFMT "\n", printk 145 arch/parisc/kernel/traps.c printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n", printk 147 arch/parisc/kernel/traps.c printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28); printk 150 arch/parisc/kernel/traps.c printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]); printk 151 arch/parisc/kernel/traps.c printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]); printk 152 arch/parisc/kernel/traps.c printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]); printk 154 arch/parisc/kernel/traps.c printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]); printk 155 arch/parisc/kernel/traps.c printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]); printk 156 arch/parisc/kernel/traps.c printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]); printk 167 arch/parisc/kernel/traps.c printk(fmt, ##__VA_ARGS__); \ printk 177 arch/parisc/kernel/traps.c printk(KERN_CRIT "Backtrace:\n"); printk 183 arch/parisc/kernel/traps.c printk(KERN_CRIT " [<" RFMT ">] %pS\n", printk 188 arch/parisc/kernel/traps.c printk(KERN_CRIT "\n"); printk 229 arch/parisc/kernel/traps.c if (err) printk(KERN_CRIT printk 249 arch/parisc/kernel/traps.c printk(KERN_CRIT "%s (pid %d): %s (code %ld)\n", printk 254 arch/parisc/kernel/traps.c printk(KERN_CRIT "%s() recursion detected.\n", __func__); printk 327 arch/parisc/kernel/traps.c printk(KERN_ERR "Trap %d on CPU %d\n", code, smp_processor_id()); printk 452 arch/parisc/kernel/traps.c printk("\n"); printk 518 arch/parisc/kernel/traps.c printk(KERN_CRIT "Interruption # %d\n", code); printk 535 arch/parisc/kernel/traps.c printk(KERN_CRIT "Power failure interrupt !\n"); printk 23 arch/parisc/kernel/unaligned.c #define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0) printk 456 arch/parisc/kernel/unaligned.c printk(KERN_WARNING "%s", buf); printk 659 arch/parisc/kernel/unaligned.c printk(KERN_CRIT "Not-handled unaligned insn 0x%08lx\n", regs->iir); printk 673 arch/parisc/kernel/unaligned.c printk(KERN_CRIT "Unaligned handler failed, ret = %d\n", ret); printk 197 arch/parisc/kernel/unwind.c printk("region 0x%x-0x%x\n", printk 339 arch/parisc/math-emu/decode_exc.c printk("%s(%d) Unknown FPU exception 0x%x\n", __FILE__, printk 88 arch/parisc/math-emu/driver.c printk(KERN_DEBUG "FP VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI ->\n "); printk 90 arch/parisc/math-emu/driver.c printk(KERN_DEBUG "\n"); printk 98 arch/parisc/math-emu/driver.c printk(KERN_DEBUG "VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI decode_fpu returns %d|0x%x\n", printk 101 arch/parisc/math-emu/driver.c printk(KERN_DEBUG "\n"); printk 204 arch/parisc/math-emu/fpudispatch.c if (FPUDEBUG) printk("class %d subop %d\n", class, subop); printk 393 arch/parisc/mm/fault.c printk(KERN_ERR printk 160 arch/parisc/mm/init.c printk("Large gap in memory detected (%ld pages). " printk 210 arch/parisc/mm/init.c printk(KERN_WARNING "Memory truncated to %ld MB\n", mem_limit >> 20); printk 224 arch/parisc/mm/init.c printk(KERN_INFO "Total Memory: %ld MB\n",mem_max >> 20); printk 309 arch/parisc/mm/init.c printk(KERN_INFO "initrd: %08lx-%08lx\n", initrd_start, initrd_end); printk 319 arch/parisc/mm/init.c printk(KERN_INFO "initrd: reserving %08lx-%08lx (mem_max %08lx)\n", __pa(initrd_start), __pa(initrd_start) + initrd_reserve, mem_max); printk 610 arch/parisc/mm/init.c printk("virtual kernel memory layout:\n" printk 670 arch/parisc/mm/init.c printk(KERN_INFO "initrd: mapping %08lx-%08lx\n", initrd_start, initrd_end); printk 33 arch/powerpc/include/asm/cpu_has_feature.h printk("Warning! cpu_has_feature() used prior to jump label init!\n"); printk 33 arch/powerpc/include/asm/hardirq.h printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); printk 206 arch/powerpc/include/asm/mmu.h printk("Warning! mmu_has_feature() used prior to jump label init!\n"); printk 201 arch/powerpc/include/asm/ptrace.h printk(KERN_CRIT "%s: partial register set\n", __func__); \ printk 239 arch/powerpc/kernel/btext.c printk("boot stdout isn't a display !\n"); printk 249 arch/powerpc/kernel/btext.c printk("trying %pOF ...\n", np); printk 251 arch/powerpc/kernel/btext.c printk("result: %d\n", rc); printk 111 arch/powerpc/kernel/crash.c printk(KERN_EMERG "Sending IPI to other CPUs\n"); printk 132 arch/powerpc/kernel/crash.c printk(KERN_EMERG "IPI complete\n"); printk 136 arch/powerpc/kernel/crash.c printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n", printk 157 arch/powerpc/kernel/crash.c printk(KERN_EMERG "Activate system reset (dumprestart) " printk 269 arch/powerpc/kernel/crash.c printk(KERN_ERR "Crash shutdown handles full, " printk 289 arch/powerpc/kernel/crash.c printk(KERN_ERR "Crash shutdown handle not found\n"); printk 99 arch/powerpc/kernel/dbell.c printk(KERN_WARNING "Received doorbell on non-smp system\n"); printk 488 arch/powerpc/kernel/fadump.c printk(KERN_INFO "Adjusted memory_limit for firmware-assisted" printk 1440 arch/powerpc/kernel/fadump.c printk(KERN_ERR "fadump: unable to create sysfs file" printk 1445 arch/powerpc/kernel/fadump.c printk(KERN_ERR "fadump: unable to create sysfs file" printk 1452 arch/powerpc/kernel/fadump.c printk(KERN_ERR "fadump: unable to create debugfs file" printk 1458 arch/powerpc/kernel/fadump.c printk(KERN_ERR "fadump: unable to create sysfs file" printk 1473 arch/powerpc/kernel/fadump.c printk(KERN_ERR "Firmware-assisted dump is not supported on" printk 347 arch/powerpc/kernel/iommu.c printk(KERN_INFO "iommu_free: invalid entry\n"); printk 348 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tentry = 0x%lx\n", entry); printk 349 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tdma_addr = 0x%llx\n", (u64)dma_addr); printk 350 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tTable = 0x%llx\n", (u64)tbl); printk 351 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tbus# = 0x%llx\n", (u64)tbl->it_busno); printk 352 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tsize = 0x%llx\n", (u64)tbl->it_size); printk 353 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tstartOff = 0x%llx\n", (u64)tbl->it_offset); printk 354 arch/powerpc/kernel/iommu.c printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index); printk 625 arch/powerpc/kernel/iommu.c printk(KERN_WARNING "TCE table is full; freeing "); printk 626 arch/powerpc/kernel/iommu.c printk(KERN_WARNING "%d entries for the kdump boot\n", printk 730 arch/powerpc/kernel/iommu.c printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", printk 98 arch/powerpc/kernel/isa-bridge.c printk(KERN_ERR "unexpected isa to pci mapping: %s\n", printk 113 arch/powerpc/kernel/isa-bridge.c printk(KERN_ERR "no ISA IO ranges or unexpected isa range, " printk 111 arch/powerpc/kernel/kprobes.c printk("Attempt to register kprobe at an unaligned address\n"); printk 114 arch/powerpc/kernel/kprobes.c printk("Cannot register a kprobe on rfi/rfid or mtmsr[d]\n"); printk 236 arch/powerpc/kernel/kprobes.c printk("Can't step on instruction %x\n", insn); printk 137 arch/powerpc/kernel/kvm.c printk(KERN_ERR "KVM: No more space (%d + %d)\n", printk 699 arch/powerpc/kernel/kvm.c printk(KERN_INFO "KVM: Live patching for a fast VM %s\n", printk 22 arch/powerpc/kernel/legacy_serial.c #define DBG(fmt...) do { printk(fmt); } while(0) printk 115 arch/powerpc/kernel/legacy_serial.c printk(KERN_DEBUG "Moved legacy port %d -> %d\n", printk 123 arch/powerpc/kernel/legacy_serial.c printk(KERN_DEBUG "Replacing legacy port %d\n", index); printk 151 arch/powerpc/kernel/legacy_serial.c printk(KERN_DEBUG "Found legacy serial port %d for %pOF\n", printk 153 arch/powerpc/kernel/legacy_serial.c printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", printk 140 arch/powerpc/kernel/machine_kexec.c printk("Crash kernel location must be 0x%x\n", printk 160 arch/powerpc/kernel/machine_kexec.c printk("Crash kernel base must be aligned to 0x%lx\n", printk 171 arch/powerpc/kernel/machine_kexec.c printk(KERN_WARNING printk 180 arch/powerpc/kernel/machine_kexec.c printk("Adjusted memory limit for crashkernel, now 0x%llx\n", printk 184 arch/powerpc/kernel/machine_kexec.c printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " printk 56 arch/powerpc/kernel/machine_kexec_32.c printk(KERN_INFO "Bye!\n"); printk 187 arch/powerpc/kernel/machine_kexec_64.c printk(KERN_INFO "kexec: waiting for cpu %d " printk 213 arch/powerpc/kernel/machine_kexec_64.c printk(KERN_INFO "kexec: Waking offline cpu %d.\n", printk 314 arch/powerpc/kernel/machine_kexec_64.c printk("kexec: Starting switchover sequence.\n"); printk 336 arch/powerpc/kernel/machine_kexec_64.c printk("kexec: Unshared all shared pages.\n"); printk 526 arch/powerpc/kernel/mce.c printk("%sMCE: CPU%d: machine check (%s) %s %s %s %s[%s]\n", printk 533 arch/powerpc/kernel/mce.c printk("%sMCE: CPU%d: PID: %d Comm: %s %sNIP: [%016llx]%s\n", printk 537 arch/powerpc/kernel/mce.c printk("%sMCE: CPU%d: NIP: [%016llx] %pS%s\n", printk 541 arch/powerpc/kernel/mce.c printk("%sMCE: CPU%d: Initiator %s\n", level, evt->cpu, initiator); printk 545 arch/powerpc/kernel/mce.c printk("%sMCE: CPU%d: %s\n", level, evt->cpu, subtype); printk 712 arch/powerpc/kernel/nvram_64.c printk(KERN_WARNING "--------%s---------\n", label); printk 713 arch/powerpc/kernel/nvram_64.c printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n"); printk 715 arch/powerpc/kernel/nvram_64.c printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n", printk 801 arch/powerpc/kernel/nvram_64.c printk(KERN_ERR "nvram_remove_partition: nvram_write failed (%d)\n", rc); printk 818 arch/powerpc/kernel/nvram_64.c printk(KERN_ERR "nvram_remove_partition: nvram_write failed (%d)\n", rc); printk 1000 arch/powerpc/kernel/nvram_64.c printk(KERN_ERR "nvram_scan_partitions: Failed kmalloc\n"); printk 1008 arch/powerpc/kernel/nvram_64.c printk(KERN_ERR "nvram_scan_partitions: Error parsing " printk 1022 arch/powerpc/kernel/nvram_64.c printk(KERN_WARNING "WARNING: nvram partition checksum" printk 1025 arch/powerpc/kernel/nvram_64.c printk(KERN_WARNING "Terminating nvram partition scan\n"); printk 1029 arch/powerpc/kernel/nvram_64.c printk(KERN_WARNING "WARNING: nvram corruption " printk 1036 arch/powerpc/kernel/nvram_64.c printk(KERN_ERR "nvram_scan_partitions: kmalloc failed\n"); printk 301 arch/powerpc/kernel/paca.c printk(KERN_DEBUG "Allocated %u bytes for %u pacas\n", printk 592 arch/powerpc/kernel/pci-common.c printk(KERN_DEBUG printk 676 arch/powerpc/kernel/pci-common.c printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n", printk 697 arch/powerpc/kernel/pci-common.c printk(KERN_INFO printk 704 arch/powerpc/kernel/pci-common.c printk(KERN_INFO printk 733 arch/powerpc/kernel/pci-common.c printk(KERN_INFO printk 742 arch/powerpc/kernel/pci-common.c printk(KERN_INFO printk 799 arch/powerpc/kernel/pci-common.c printk(KERN_ERR "No host bridge for PCI dev %s !\n", printk 1240 arch/powerpc/kernel/pci-common.c printk(KERN_WARNING "PCI: Cannot allocate resource region %d" printk 1319 arch/powerpc/kernel/pci-common.c printk(KERN_DEBUG printk 1347 arch/powerpc/kernel/pci-common.c printk(KERN_DEBUG printk 1552 arch/powerpc/kernel/pci-common.c printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); printk 84 arch/powerpc/kernel/pci_32.c printk(KERN_WARNING "Can't get bus-range for %pOF, " printk 122 arch/powerpc/kernel/pci_32.c printk(KERN_ERR "Can't allocate OF bus map !\n"); printk 148 arch/powerpc/kernel/pci_32.c printk("PCI->OF bus map:\n"); printk 152 arch/powerpc/kernel/pci_32.c printk("%d -> %d\n", i, pci_to_OF_bus_map[i]); printk 239 arch/powerpc/kernel/pci_32.c printk(KERN_INFO "PCI: Probing PCI hardware\n"); printk 44 arch/powerpc/kernel/pci_64.c printk(KERN_INFO "PCI: Probing PCI hardware\n"); printk 71 arch/powerpc/kernel/pci_64.c printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); printk 156 arch/powerpc/kernel/pci_of_scan.c printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); printk 267 arch/powerpc/kernel/pci_of_scan.c printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %pOF\n", printk 273 arch/powerpc/kernel/pci_of_scan.c printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %pOF\n", printk 284 arch/powerpc/kernel/pci_of_scan.c printk(KERN_ERR "Failed to create pci bus for %pOF\n", printk 312 arch/powerpc/kernel/pci_of_scan.c printk(KERN_ERR "PCI: ignoring extra I/O range" printk 318 arch/powerpc/kernel/pci_of_scan.c printk(KERN_ERR "PCI: too many memory ranges" printk 48 arch/powerpc/kernel/pmc.c printk(KERN_WARNING "reserve_pmc_hardware: " printk 73 arch/powerpc/kernel/process.c #define TM_DEBUG(x...) printk(KERN_INFO x) printk 1223 arch/powerpc/kernel/process.c printk("Instruction dump:"); printk 1394 arch/powerpc/kernel/process.c printk("NIP: "REG" LR: "REG" CTR: "REG"\n", printk 1396 arch/powerpc/kernel/process.c printk("REGS: %px TRAP: %04lx %s (%s)\n", printk 1398 arch/powerpc/kernel/process.c printk("MSR: "REG" ", regs->msr); printk 1431 arch/powerpc/kernel/process.c printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip); printk 1432 arch/powerpc/kernel/process.c printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link); printk 2056 arch/powerpc/kernel/process.c printk("Call Trace:\n"); printk 2065 arch/powerpc/kernel/process.c printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip); printk 2087 arch/powerpc/kernel/process.c printk("--- interrupt: %lx at %pS\n LR = %pS\n", printk 63 arch/powerpc/kernel/prom.c #define DBG(fmt...) printk(KERN_ERR fmt) printk 772 arch/powerpc/kernel/prom.c printk("Failed to identify boot CPU !\n"); printk 299 arch/powerpc/kernel/rtas-proc.c printk(KERN_WARNING "error: setting poweron time returned: %s\n", printk 362 arch/powerpc/kernel/rtas-proc.c printk(KERN_WARNING "error: setting the clock returned: %s\n", printk 373 arch/powerpc/kernel/rtas-proc.c printk(KERN_WARNING "error: reading the clock returned: %s\n", printk 440 arch/powerpc/kernel/rtas-proc.c printk (KERN_ERR "error: could not get rtas-sensors\n"); printk 719 arch/powerpc/kernel/rtas-proc.c printk(KERN_WARNING "error: setting tone frequency returned: %s\n", printk 747 arch/powerpc/kernel/rtas-proc.c printk(KERN_WARNING "error: setting tone volume returned: %s\n", printk 347 arch/powerpc/kernel/rtas.c printk (KERN_WARNING "RTAS: bad log buffer size %d\n", printk 542 arch/powerpc/kernel/rtas.c printk(KERN_ERR "%s: unexpected RTAS error %d\n", printk 690 arch/powerpc/kernel/rtas.c printk("RTAS system-reboot returned %d\n", printk 700 arch/powerpc/kernel/rtas.c printk("RTAS power-off returned %d\n", printk 710 arch/powerpc/kernel/rtas.c printk("RTAS power-off returned %d\n", printk 740 arch/powerpc/kernel/rtas.c printk(KERN_EMERG "ibm,os-term call failed %d\n", status); printk 752 arch/powerpc/kernel/rtas.c printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); printk 759 arch/powerpc/kernel/rtas.c printk(KERN_DEBUG "ibm,suspend-me returned %d\n", rc); printk 814 arch/powerpc/kernel/rtas.c printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", printk 954 arch/powerpc/kernel/rtas.c printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned %ld\n",rc); printk 959 arch/powerpc/kernel/rtas.c printk(KERN_ERR "rtas_ibm_suspend_me: vasi_state returned state %ld\n", printk 1001 arch/powerpc/kernel/rtas.c printk(KERN_ERR "Error doing global join\n"); printk 189 arch/powerpc/kernel/rtas_flash.c printk(KERN_INFO "FLASH: flash image with %ld bytes stored for hardware flash on reboot\n", image_size); printk 568 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); printk 569 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); printk 575 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot " printk 577 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); printk 598 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); printk 603 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); printk 625 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); printk 626 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: performing flash and reboot\n"); printk 629 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); printk 633 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: success\n"); printk 636 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); printk 639 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); printk 642 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); printk 645 arch/powerpc/kernel/rtas_flash.c printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); printk 717 arch/powerpc/kernel/rtas_flash.c printk(KERN_ERR "%s: failed to create block cache\n", printk 161 arch/powerpc/kernel/rtas_pci.c printk(KERN_ERR "Can't get address for Python workarounds !\n"); printk 177 arch/powerpc/kernel/rtas_pci.c printk(KERN_INFO "Python workaround: "); printk 185 arch/powerpc/kernel/rtas_pci.c printk("reg0: %x\n", val); printk 119 arch/powerpc/kernel/rtasd.c printk(RTAS_DEBUG "%d -------- %s begin --------\n", printk 141 arch/powerpc/kernel/rtasd.c printk(KERN_DEBUG "%s\n", buffer); printk 144 arch/powerpc/kernel/rtasd.c printk(KERN_DEBUG "%s\n", buffer); printk 146 arch/powerpc/kernel/rtasd.c printk(RTAS_DEBUG "%d -------- %s end ----------\n", printk 151 arch/powerpc/kernel/rtasd.c printk(RTAS_DEBUG "event: %d, Type: %s (%d), Severity: %d\n", printk 406 arch/powerpc/kernel/rtasd.c printk(KERN_DEBUG "rtasd: surveillance not supported\n"); printk 410 arch/powerpc/kernel/rtasd.c printk(KERN_ERR "rtasd: could not update surveillance\n"); printk 423 arch/powerpc/kernel/rtasd.c printk(KERN_ERR "event-scan failed\n"); printk 505 arch/powerpc/kernel/rtasd.c printk(KERN_DEBUG "RTAS daemon started\n"); printk 531 arch/powerpc/kernel/rtasd.c printk(KERN_INFO "rtasd: No event-scan on system\n"); printk 537 arch/powerpc/kernel/rtasd.c printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n"); printk 543 arch/powerpc/kernel/rtasd.c printk(KERN_DEBUG "rtasd: scan rate is 0, not scanning\n"); printk 554 arch/powerpc/kernel/rtasd.c printk(KERN_ERR "rtasd: no memory\n"); printk 577 arch/powerpc/kernel/rtasd.c printk(KERN_ERR "Failed to create error_log proc entry\n"); printk 420 arch/powerpc/kernel/setup-common.c printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n", printk 422 arch/powerpc/kernel/setup-common.c printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift); printk 539 arch/powerpc/kernel/setup-common.c printk(KERN_WARNING printk 545 arch/powerpc/kernel/setup-common.c printk(KERN_INFO "Partition configured for %d cpus.\n", printk 614 arch/powerpc/kernel/setup-common.c printk(KERN_ERR "Entry %d in ppc_md non empty before" printk 636 arch/powerpc/kernel/setup-common.c printk(KERN_INFO "Using %s machine description\n", ppc_md.name); printk 750 arch/powerpc/kernel/setup-common.c printk(KERN_ERR printk 104 arch/powerpc/kernel/setup_32.c printk(KERN_INFO "l2cr set to %lx\n", val); printk 117 arch/powerpc/kernel/setup_32.c printk(KERN_INFO "l3cr set to %lx\n", val); printk 939 arch/powerpc/kernel/smp.c printk(KERN_ERR "CPU%d didn't die...\n", cpu); printk 1054 arch/powerpc/kernel/smp.c printk(KERN_ERR "Processor %u is stuck.\n", cpu); printk 81 arch/powerpc/kernel/tau_6xx.c printk("TAUupdate "); printk 94 arch/powerpc/kernel/tau_6xx.c printk("low threshold crossed "); printk 106 arch/powerpc/kernel/tau_6xx.c printk("high threshold crossed "); printk 112 arch/powerpc/kernel/tau_6xx.c printk("grew = %d\n", tau[cpu].grew); printk 166 arch/powerpc/kernel/tau_6xx.c printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__); printk 229 arch/powerpc/kernel/tau_6xx.c printk("Thermal assist unit not available\n"); printk 242 arch/powerpc/kernel/tau_6xx.c printk("Thermal assist unit "); printk 244 arch/powerpc/kernel/tau_6xx.c printk("using interrupts, "); printk 246 arch/powerpc/kernel/tau_6xx.c printk("using timers, "); printk 248 arch/powerpc/kernel/tau_6xx.c printk("shrink_timer: %d jiffies\n", shrink_timer); printk 791 arch/powerpc/kernel/time.c printk(KERN_ERR "WARNING: Estimating decrementer frequency " printk 800 arch/powerpc/kernel/time.c printk(KERN_ERR "WARNING: Estimating processor frequency " printk 965 arch/powerpc/kernel/time.c printk(KERN_ERR "clocksource: %s is already registered\n", printk 970 arch/powerpc/kernel/time.c printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n", printk 1086 arch/powerpc/kernel/time.c printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n", printk 1088 arch/powerpc/kernel/time.c printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", printk 92 arch/powerpc/kernel/traps.c #define TM_DEBUG(x...) printk(KERN_INFO x) printk 214 arch/powerpc/kernel/traps.c printk("\n"); printk 264 arch/powerpc/kernel/traps.c printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); printk 266 arch/powerpc/kernel/traps.c printk("%s PAGE_SIZE=%luK%s%s%s%s%s%s %s\n", printk 566 arch/powerpc/kernel/traps.c printk(KERN_DEBUG "%s bad port %lx at %p\n", printk 620 arch/powerpc/kernel/traps.c printk("Machine check in kernel mode.\n"); printk 621 arch/powerpc/kernel/traps.c printk("Caused by (from MCSR=%lx): ", reason); printk 725 arch/powerpc/kernel/traps.c printk("Machine check in kernel mode.\n"); printk 726 arch/powerpc/kernel/traps.c printk("Caused by (from MCSR=%lx): ", reason); printk 765 arch/powerpc/kernel/traps.c printk("Machine check in kernel mode.\n"); printk 766 arch/powerpc/kernel/traps.c printk("Caused by (from MCSR=%lx): ", reason); printk 790 arch/powerpc/kernel/traps.c printk("Machine check in kernel mode.\n"); printk 791 arch/powerpc/kernel/traps.c printk("Caused by (from SRR1=%lx): ", reason); printk 1089 arch/powerpc/kernel/traps.c printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", printk 1524 arch/powerpc/kernel/traps.c printk(KERN_EMERG "Unexpected TM Bad Thing exception " printk 1644 arch/powerpc/kernel/traps.c printk(KERN_EMERG "Unrecoverable FP Unavailable Exception " printk 1662 arch/powerpc/kernel/traps.c printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception " printk 1679 arch/powerpc/kernel/traps.c printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception " printk 2033 arch/powerpc/kernel/traps.c printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx %s\n", printk 2044 arch/powerpc/kernel/traps.c printk(KERN_EMERG "VMX/Altivec assist exception in kernel mode" printk 2130 arch/powerpc/kernel/traps.c printk(KERN_ERR "unrecognized spe instruction " printk 2166 arch/powerpc/kernel/traps.c printk(KERN_ERR "unrecognized spe instruction " printk 2203 arch/powerpc/kernel/traps.c printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n"); printk 2214 arch/powerpc/kernel/traps.c printk(KERN_EMERG "Bad kernel stack pointer %lx at %lx\n", printk 95 arch/powerpc/kernel/udbg.c printk("%s", s); printk 167 arch/powerpc/kernel/udbg.c printk(KERN_INFO "early console immortal !\n"); printk 37 arch/powerpc/kernel/vdso.c #define DBG(fmt...) printk(fmt) printk 284 arch/powerpc/kernel/vdso.c printk(KERN_WARNING "vDSO32: function %s not found !\n", printk 299 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig); printk 308 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix); printk 390 arch/powerpc/kernel/vdso.c printk(KERN_WARNING "vDSO64: function %s not found !\n", printk 410 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig); printk 419 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix); printk 447 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO32: required symbol section not found\n"); printk 452 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO32: the .text section was not found\n"); printk 462 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO64: required symbol section not found\n"); printk 467 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO64: the .text section was not found\n"); printk 501 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO64: Can't find symbol " printk 513 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO32: Can't find symbol " printk 760 arch/powerpc/kernel/vdso.c printk(KERN_ERR "vDSO setup failure, not enabled !\n"); printk 190 arch/powerpc/kvm/book3s.c printk(KERN_INFO "Queueing interrupt %x\n", vec); printk 357 arch/powerpc/kvm/book3s.c printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority); printk 362 arch/powerpc/kvm/book3s.c printk(KERN_INFO "Deliver interrupt 0x%x? %x\n", vec, deliver); printk 404 arch/powerpc/kvm/book3s.c printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions); printk 23 arch/powerpc/kvm/book3s_32_mmu.c #define dprintk(X...) printk(KERN_INFO X) printk 29 arch/powerpc/kvm/book3s_32_mmu.c #define dprintk_pte(X...) printk(KERN_INFO X) printk 172 arch/powerpc/kvm/book3s_32_mmu.c printk(KERN_INFO "BAT is not readable!\n"); printk 208 arch/powerpc/kvm/book3s_32_mmu.c printk(KERN_INFO "KVM: Invalid PTEG!\n"); printk 23 arch/powerpc/kvm/book3s_32_mmu_host.c #define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__) printk 29 arch/powerpc/kvm/book3s_32_mmu_host.c #define dprintk_sr(a, ...) printk(KERN_INFO a, __VA_ARGS__) printk 150 arch/powerpc/kvm/book3s_32_mmu_host.c printk(KERN_INFO "Couldn't get guest page for gpa %lx!\n", printk 22 arch/powerpc/kvm/book3s_64_mmu.c #define dprintk(X...) printk(KERN_INFO X) printk 98 arch/powerpc/kvm/book3s_64_mmu_host.c printk(KERN_INFO "Couldn't get guest page for gpa %lx!\n", printk 114 arch/powerpc/kvm/book3s_64_mmu_host.c printk(KERN_ERR "KVM: Segment map for 0x%llx (0x%lx) failed\n", printk 37 arch/powerpc/kvm/book3s_64_mmu_hv.c printk(KERN_DEBUG "RESIZE HPT %p: ", resize); \ printk 38 arch/powerpc/kvm/book3s_64_mmu_hv.c printk(__VA_ARGS__); \ printk 1064 arch/powerpc/kvm/book3s_emulate.c printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst); printk 1266 arch/powerpc/kvm/book3s_hv.c printk(KERN_EMERG "KVM trap in HV mode!\n"); printk 1267 arch/powerpc/kvm/book3s_hv.c printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n", printk 1428 arch/powerpc/kvm/book3s_hv.c printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n", printk 22 arch/powerpc/kvm/book3s_paired_singles.c #define dprintk printk printk 460 arch/powerpc/kvm/book3s_pr.c printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr); printk 800 arch/powerpc/kvm/book3s_pr.c printk(KERN_INFO "Giving up ext 0x%lx\n", msr); printk 883 arch/powerpc/kvm/book3s_pr.c printk(KERN_INFO "Loading up ext 0x%lx\n", msr); printk 1404 arch/powerpc/kvm/book3s_pr.c printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n", printk 69 arch/powerpc/kvm/booke.c printk("pc: %08lx msr: %08llx\n", vcpu->arch.regs.nip, printk 71 arch/powerpc/kvm/booke.c printk("lr: %08lx ctr: %08lx\n", vcpu->arch.regs.link, printk 73 arch/powerpc/kvm/booke.c printk("srr0: %08llx srr1: %08llx\n", vcpu->arch.shared->srr0, printk 76 arch/powerpc/kvm/booke.c printk("exceptions: %08lx\n", vcpu->arch.pending_exceptions); printk 79 arch/powerpc/kvm/booke.c printk("gpr%02d: %08lx %08lx %08lx %08lx\n", i, printk 820 arch/powerpc/kvm/booke.c printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n", printk 1033 arch/powerpc/kvm/booke.c printk("MACHINE CHECK: %lx\n", mfspr(SPRN_MCSR)); printk 1163 arch/powerpc/kvm/booke.c printk(KERN_CRIT "%s: unexpected SPE interrupt %u at %08lx\n", printk 1344 arch/powerpc/kvm/booke.c printk(KERN_EMERG "exit_nr %d\n", exit_nr); printk 118 arch/powerpc/kvm/emulate.c printk(KERN_INFO "mtspr: unknown spr " printk 179 arch/powerpc/kvm/emulate.c printk(KERN_INFO "mfspr: unknown spr " printk 294 arch/powerpc/kvm/emulate.c printk(KERN_ERR "Couldn't emulate instruction 0x%08x " printk 1116 arch/powerpc/kvm/powerpc.c printk(KERN_ERR "bad MMIO length: %d\n", run->mmio.len); printk 1237 arch/powerpc/kvm/powerpc.c printk(KERN_ERR "%s: bad MMIO length: %d\n", __func__, printk 1325 arch/powerpc/kvm/powerpc.c printk(KERN_ERR "%s: bad MMIO length: %d\n", __func__, printk 56 arch/powerpc/kvm/timing.c printk(KERN_ERR"%s - wrap adding sum of durations" printk 66 arch/powerpc/kvm/timing.c printk(KERN_ERR"%s - wrap adding sum of squared durations" printk 219 arch/powerpc/kvm/timing.c printk(KERN_ERR"%s: error creating debugfs file %s\n", printk 402 arch/powerpc/lib/code-patching.c if (!(x)) printk("code-patching: test failed at line %d\n", __LINE__); printk 675 arch/powerpc/lib/code-patching.c printk(KERN_DEBUG "Running code patching self-tests ...\n"); printk 106 arch/powerpc/lib/feature-fixups.c printk("Unable to patch feature section at %p - %p" \ printk 159 arch/powerpc/lib/feature-fixups.c printk(KERN_DEBUG "stf-barrier: patched %d entry locations (%s barrier)\n", i, printk 216 arch/powerpc/lib/feature-fixups.c printk(KERN_DEBUG "stf-barrier: patched %d exit locations (%s barrier)\n", i, printk 267 arch/powerpc/lib/feature-fixups.c printk(KERN_DEBUG "rfi-flush: patched %d locations (%s flush)\n", i, printk 300 arch/powerpc/lib/feature-fixups.c printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i); printk 344 arch/powerpc/lib/feature-fixups.c printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i); printk 476 arch/powerpc/lib/feature-fixups.c if (!(x)) printk("feature-fixups: test failed at line %d\n", __LINE__); printk 689 arch/powerpc/lib/feature-fixups.c printk(KERN_DEBUG "Running feature fixup self-tests ...\n"); printk 128 arch/powerpc/lib/rheap.c printk(KERN_ERR "rh: out of slots; crash is imminent.\n"); printk 712 arch/powerpc/lib/rheap.c printk(KERN_INFO printk 716 arch/powerpc/lib/rheap.c printk(KERN_INFO " Free:\n"); printk 721 arch/powerpc/lib/rheap.c printk(KERN_INFO printk 725 arch/powerpc/lib/rheap.c printk(KERN_INFO "\n"); printk 727 arch/powerpc/lib/rheap.c printk(KERN_INFO " Taken:\n"); printk 732 arch/powerpc/lib/rheap.c printk(KERN_INFO printk 736 arch/powerpc/lib/rheap.c printk(KERN_INFO "\n"); printk 742 arch/powerpc/lib/rheap.c printk(KERN_INFO printk 2709 arch/powerpc/lib/sstep.c printk(KERN_CRIT "Can't kprobe this since kernel stack would overflow.\n"); printk 960 arch/powerpc/lib/test_emulate_step.c printk(KERN_INFO "Running instruction emulation self-tests ...\n"); printk 13 arch/powerpc/math-emu/fabs.c printk("%s: D %p, B %p: ", __func__, frD, frB); printk 15 arch/powerpc/math-emu/fabs.c printk("\n"); printk 19 arch/powerpc/math-emu/fadd.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 26 arch/powerpc/math-emu/fadd.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 27 arch/powerpc/math-emu/fadd.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 33 arch/powerpc/math-emu/fadd.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 20 arch/powerpc/math-emu/fadds.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 27 arch/powerpc/math-emu/fadds.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 28 arch/powerpc/math-emu/fadds.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 34 arch/powerpc/math-emu/fadds.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 20 arch/powerpc/math-emu/fcmpo.c printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB); printk 27 arch/powerpc/math-emu/fcmpo.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 28 arch/powerpc/math-emu/fcmpo.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 44 arch/powerpc/math-emu/fcmpo.c printk("CR: %08x\n", *ccr); printk 20 arch/powerpc/math-emu/fcmpu.c printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB); printk 27 arch/powerpc/math-emu/fcmpu.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 28 arch/powerpc/math-emu/fcmpu.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 41 arch/powerpc/math-emu/fcmpu.c printk("CR: %08x\n", *ccr); printk 22 arch/powerpc/math-emu/fctiw.c printk("%s: D %p, B %p: ", __func__, frD, frB); printk 24 arch/powerpc/math-emu/fctiw.c printk("\n"); printk 29 arch/powerpc/math-emu/fctiwz.c printk("%s: D %p, B %p: ", __func__, frD, frB); printk 31 arch/powerpc/math-emu/fctiwz.c printk("\n"); printk 19 arch/powerpc/math-emu/fdiv.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 26 arch/powerpc/math-emu/fdiv.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 27 arch/powerpc/math-emu/fdiv.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 33 arch/powerpc/math-emu/fdiv.c printk("%s: FPSCR_VXZDZ raised\n", __func__); printk 39 arch/powerpc/math-emu/fdiv.c printk("%s: FPSCR_VXIDI raised\n", __func__); printk 51 arch/powerpc/math-emu/fdiv.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 20 arch/powerpc/math-emu/fdivs.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 27 arch/powerpc/math-emu/fdivs.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 28 arch/powerpc/math-emu/fdivs.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 34 arch/powerpc/math-emu/fdivs.c printk("%s: FPSCR_VXZDZ raised\n", __func__); printk 40 arch/powerpc/math-emu/fdivs.c printk("%s: FPSCR_VXIDI raised\n", __func__); printk 53 arch/powerpc/math-emu/fdivs.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 21 arch/powerpc/math-emu/fmadd.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 29 arch/powerpc/math-emu/fmadd.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 30 arch/powerpc/math-emu/fmadd.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 31 arch/powerpc/math-emu/fmadd.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 46 arch/powerpc/math-emu/fmadd.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 22 arch/powerpc/math-emu/fmadds.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 30 arch/powerpc/math-emu/fmadds.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 31 arch/powerpc/math-emu/fmadds.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 32 arch/powerpc/math-emu/fmadds.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 47 arch/powerpc/math-emu/fmadds.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 13 arch/powerpc/math-emu/fmr.c printk("%s: D %p, B %p: ", __func__, frD, frB); printk 15 arch/powerpc/math-emu/fmr.c printk("\n"); printk 21 arch/powerpc/math-emu/fmsub.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 29 arch/powerpc/math-emu/fmsub.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 30 arch/powerpc/math-emu/fmsub.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 31 arch/powerpc/math-emu/fmsub.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 49 arch/powerpc/math-emu/fmsub.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 22 arch/powerpc/math-emu/fmsubs.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 30 arch/powerpc/math-emu/fmsubs.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 31 arch/powerpc/math-emu/fmsubs.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 32 arch/powerpc/math-emu/fmsubs.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 50 arch/powerpc/math-emu/fmsubs.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 19 arch/powerpc/math-emu/fmul.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 26 arch/powerpc/math-emu/fmul.c printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", printk 28 arch/powerpc/math-emu/fmul.c printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", printk 39 arch/powerpc/math-emu/fmul.c printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", printk 20 arch/powerpc/math-emu/fmuls.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 27 arch/powerpc/math-emu/fmuls.c printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", printk 29 arch/powerpc/math-emu/fmuls.c printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", printk 40 arch/powerpc/math-emu/fmuls.c printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", printk 13 arch/powerpc/math-emu/fnabs.c printk("%s: D %p, B %p: ", __func__, frD, frB); printk 15 arch/powerpc/math-emu/fnabs.c printk("\n"); printk 13 arch/powerpc/math-emu/fneg.c printk("%s: D %p, B %p: ", __func__, frD, frB); printk 15 arch/powerpc/math-emu/fneg.c printk("\n"); printk 21 arch/powerpc/math-emu/fnmadd.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 29 arch/powerpc/math-emu/fnmadd.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 30 arch/powerpc/math-emu/fnmadd.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 31 arch/powerpc/math-emu/fnmadd.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 49 arch/powerpc/math-emu/fnmadd.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 22 arch/powerpc/math-emu/fnmadds.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 30 arch/powerpc/math-emu/fnmadds.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 31 arch/powerpc/math-emu/fnmadds.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 32 arch/powerpc/math-emu/fnmadds.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 50 arch/powerpc/math-emu/fnmadds.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 21 arch/powerpc/math-emu/fnmsub.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 29 arch/powerpc/math-emu/fnmsub.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 30 arch/powerpc/math-emu/fnmsub.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 31 arch/powerpc/math-emu/fnmsub.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 52 arch/powerpc/math-emu/fnmsub.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 22 arch/powerpc/math-emu/fnmsubs.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 30 arch/powerpc/math-emu/fnmsubs.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 31 arch/powerpc/math-emu/fnmsubs.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 32 arch/powerpc/math-emu/fnmsubs.c printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); printk 53 arch/powerpc/math-emu/fnmsubs.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 9 arch/powerpc/math-emu/fre.c printk("%s: %p %p\n", __func__, frD, frB); printk 10 arch/powerpc/math-emu/fres.c printk("%s: %p %p\n", __func__, frD, frB); printk 18 arch/powerpc/math-emu/frsp.c printk("%s: D %p, B %p\n", __func__, frD, frB); printk 24 arch/powerpc/math-emu/frsp.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 10 arch/powerpc/math-emu/frsqrte.c printk("%s: %p %p\n", __func__, frD, frB); printk 9 arch/powerpc/math-emu/frsqrtes.c printk("%s: %p %p\n", __func__, frD, frB); printk 17 arch/powerpc/math-emu/fsel.c printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); printk 23 arch/powerpc/math-emu/fsel.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 24 arch/powerpc/math-emu/fsel.c printk("B: %08x %08x\n", frB[0], frB[1]); printk 25 arch/powerpc/math-emu/fsel.c printk("C: %08x %08x\n", frC[0], frC[1]); printk 37 arch/powerpc/math-emu/fsel.c printk("D: %08x.%08x\n", frD[0], frD[1]); printk 18 arch/powerpc/math-emu/fsqrt.c printk("%s: %p %p %p %p\n", __func__, frD, frB); printk 24 arch/powerpc/math-emu/fsqrt.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 35 arch/powerpc/math-emu/fsqrt.c printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 19 arch/powerpc/math-emu/fsqrts.c printk("%s: %p %p %p %p\n", __func__, frD, frB); printk 25 arch/powerpc/math-emu/fsqrts.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 36 arch/powerpc/math-emu/fsqrts.c printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 19 arch/powerpc/math-emu/fsub.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 26 arch/powerpc/math-emu/fsub.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 27 arch/powerpc/math-emu/fsub.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 39 arch/powerpc/math-emu/fsub.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 20 arch/powerpc/math-emu/fsubs.c printk("%s: %p %p %p\n", __func__, frD, frA, frB); printk 27 arch/powerpc/math-emu/fsubs.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 28 arch/powerpc/math-emu/fsubs.c printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); printk 40 arch/powerpc/math-emu/fsubs.c printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 15 arch/powerpc/math-emu/lfd.c printk("%s: D %p, ea %p: ", __func__, frD, ea); printk 17 arch/powerpc/math-emu/lfd.c printk("\n"); printk 20 arch/powerpc/math-emu/lfs.c printk("%s: D %p, ea %p\n", __func__, frD, ea); printk 29 arch/powerpc/math-emu/lfs.c printk("A: %ld %lu %ld (%ld) [%08lx]\n", A_s, A_f, A_e, A_c, printk 36 arch/powerpc/math-emu/lfs.c printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); printk 718 arch/powerpc/math-emu/math_efp.c printk(KERN_ERR "\nOoops! IEEE-754 compliance handler encountered un-supported instruction.\ninst code: %08lx\n", speinsn); printk 15 arch/powerpc/math-emu/mcrfs.c printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS); printk 29 arch/powerpc/math-emu/mcrfs.c printk("CR: %08x\n", __func__, *ccr); printk 15 arch/powerpc/math-emu/mffs.c printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]); printk 16 arch/powerpc/math-emu/mtfsb0.c printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR); printk 16 arch/powerpc/math-emu/mtfsb1.c printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR); printk 48 arch/powerpc/math-emu/mtfsf.c printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR); printk 21 arch/powerpc/math-emu/mtfsfi.c printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR); printk 11 arch/powerpc/math-emu/stfd.c printk("%s: S %p, ea %p: ", __func__, frS, ea); printk 13 arch/powerpc/math-emu/stfd.c printk("\n"); printk 10 arch/powerpc/math-emu/stfiwx.c printk("%s: %p %p\n", __func__, frS, ea); printk 20 arch/powerpc/math-emu/stfs.c printk("%s: S %p, ea %p\n", __func__, frS, ea); printk 26 arch/powerpc/math-emu/stfs.c printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); printk 32 arch/powerpc/math-emu/stfs.c printk("R: %ld %lu %ld (%ld)\n", R_s, R_f, R_e, R_c); printk 177 arch/powerpc/mm/book3s64/hash_pgtable.c printk(KERN_ERR "Failed to do bolted mapping IO " printk 522 arch/powerpc/mm/book3s64/hash_utils.c printk(KERN_INFO "Huge page(16GB) memory: " printk 697 arch/powerpc/mm/book3s64/hash_utils.c printk(KERN_DEBUG "Page orders: linear mapping = %d, " printk 849 arch/powerpc/mm/book3s64/hash_utils.c printk(KERN_INFO "Using 1TB segments\n"); printk 1397 arch/powerpc/mm/book3s64/hash_utils.c printk(KERN_ALERT "Reducing vmalloc segment " printk 682 arch/powerpc/mm/fault.c printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n", printk 686 arch/powerpc/mm/fault.c printk(KERN_ALERT "Thread overran stack, or stack corrupted\n"); printk 257 arch/powerpc/mm/mem.c printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n", printk 259 arch/powerpc/mm/mem.c printk(KERN_DEBUG "Memory hole size: %ldMB\n", printk 189 arch/powerpc/mm/nohash/44x.c printk(KERN_DEBUG "bolted entries: "); printk 192 arch/powerpc/mm/nohash/44x.c printk("%d ", i); printk 194 arch/powerpc/mm/nohash/44x.c printk("\n"); printk 32 arch/powerpc/mm/nohash/mmu_context.c #define pr_hard(args...) printk(KERN_DEBUG args) printk 33 arch/powerpc/mm/nohash/mmu_context.c #define pr_hardcont(args...) printk(KERN_CONT args) printk 479 arch/powerpc/mm/nohash/mmu_context.c printk(KERN_INFO printk 44 arch/powerpc/mm/numa.c #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); } printk 160 arch/powerpc/mm/numa.c printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", printk 331 arch/powerpc/mm/numa.c printk(KERN_WARNING "NUMA: " printk 344 arch/powerpc/mm/numa.c printk(KERN_WARNING "NUMA: distance array capped at " printk 641 arch/powerpc/mm/numa.c printk(KERN_WARNING "NUMA disabled by user\n"); printk 748 arch/powerpc/mm/numa.c printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", printk 750 arch/powerpc/mm/numa.c printk(KERN_DEBUG "Memory hole size: %ldMB\n", printk 1200 arch/powerpc/mm/numa.c printk(KERN_ERR printk 186 arch/powerpc/oprofile/cell/spu_profiler.c printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n"); printk 162 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 209 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 217 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 264 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 360 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 480 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 626 arch/powerpc/oprofile/cell/spu_task_sync.c printk(KERN_ERR "SPU_PROF: " printk 71 arch/powerpc/oprofile/cell/vma_map.c printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n", printk 132 arch/powerpc/oprofile/cell/vma_map.c printk(KERN_ERR "SPU_PROF: " printk 138 arch/powerpc/oprofile/cell/vma_map.c printk(KERN_ERR "SPU_PROF: " printk 144 arch/powerpc/oprofile/cell/vma_map.c printk(KERN_ERR "SPU_PROF: " printk 230 arch/powerpc/oprofile/cell/vma_map.c printk(KERN_ERR "SPU_PROF: " printk 235 arch/powerpc/oprofile/common.c printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n", printk 231 arch/powerpc/oprofile/op_model_cell.c printk(KERN_WARNING "%s: rtas returned: %d\n", printk 270 arch/powerpc/oprofile/op_model_cell.c printk(KERN_WARNING "%s: rtas returned: %d\n", printk 571 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR printk 653 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR "%s: pm_rtas_activate_signals failed, " printk 698 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR printk 759 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR printk 860 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR printk 1101 arch/powerpc/oprofile/op_model_cell.c printk(KERN_WARNING "%s: rtas returned: %d\n", printk 1163 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR printk 1260 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR "CPU freq change registration failed: %d\n", printk 1310 arch/powerpc/oprofile/op_model_cell.c printk(KERN_ERR printk 45 arch/powerpc/oprofile/op_model_pa6t.c printk(KERN_ERR "ctr_read called with bad arg %u\n", i); printk 72 arch/powerpc/oprofile/op_model_pa6t.c printk(KERN_ERR "ctr_write called with bad arg %u\n", i); printk 761 arch/powerpc/perf/core-book3s.c printk(KERN_ERR "oops trying to read PMC%d\n", idx); printk 800 arch/powerpc/perf/core-book3s.c printk(KERN_ERR "oops trying to write PMC%d\n", idx); printk 1329 arch/powerpc/perf/core-book3s.c printk(KERN_ERR "oops compute_mmcr failed\n"); printk 2239 arch/powerpc/perf/core-book3s.c printk(KERN_WARNING "Can't find PMC that caused IRQ\n"); printk 76 arch/powerpc/perf/core-fsl-emb.c printk(KERN_ERR "oops trying to read PMC%d\n", idx); printk 107 arch/powerpc/perf/core-fsl-emb.c printk(KERN_ERR "oops trying to write PMC%d\n", idx); printk 138 arch/powerpc/perf/core-fsl-emb.c printk(KERN_ERR "oops trying to write PMLCA%d\n", idx); printk 169 arch/powerpc/perf/core-fsl-emb.c printk(KERN_ERR "oops trying to write PMLCB%d\n", idx); printk 75 arch/powerpc/platforms/40x/ep405.c printk(KERN_ERR "EP405 BCSR not found !\n"); printk 80 arch/powerpc/platforms/40x/ep405.c printk(KERN_ERR "EP405 BCSR failed to map !\n"); printk 59 arch/powerpc/platforms/44x/canyonlands.c printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n"); printk 67 arch/powerpc/platforms/44x/canyonlands.c printk(KERN_CRIT "Could not remap bcsr\n"); printk 74 arch/powerpc/platforms/44x/canyonlands.c printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n"); printk 82 arch/powerpc/platforms/44x/canyonlands.c printk(KERN_CRIT "Could not get gpio node address\n"); printk 15 arch/powerpc/platforms/44x/machine_check.c printk("Machine check in kernel mode.\n"); printk 17 arch/powerpc/platforms/44x/machine_check.c printk("Instruction Synchronous Machine Check exception\n"); printk 23 arch/powerpc/platforms/44x/machine_check.c printk("Instruction Read PLB Error\n"); printk 25 arch/powerpc/platforms/44x/machine_check.c printk("Data Read PLB Error\n"); printk 27 arch/powerpc/platforms/44x/machine_check.c printk("Data Write PLB Error\n"); printk 29 arch/powerpc/platforms/44x/machine_check.c printk("TLB Parity Error\n"); printk 32 arch/powerpc/platforms/44x/machine_check.c printk("I-Cache Parity Error\n"); printk 35 arch/powerpc/platforms/44x/machine_check.c printk("D-Cache Search Parity Error\n"); printk 37 arch/powerpc/platforms/44x/machine_check.c printk("D-Cache Flush Parity Error\n"); printk 39 arch/powerpc/platforms/44x/machine_check.c printk("Machine Check exception is imprecise\n"); printk 53 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "Machine check in kernel mode.\n"); printk 55 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "Instruction Synchronous Machine Check exception\n"); printk 61 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "Instruction Read PLB Error\n"); printk 63 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "Data Read PLB Error\n"); printk 65 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "Data Write PLB Error\n"); printk 67 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "TLB Parity Error\n"); printk 70 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "I-Cache Parity Error\n"); printk 73 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "D-Cache Search Parity Error\n"); printk 75 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "GPR Parity Error\n"); printk 77 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "FPR Parity Error\n"); printk 79 arch/powerpc/platforms/44x/machine_check.c printk(KERN_ERR "Machine Check exception is imprecise\n"); printk 85 arch/powerpc/platforms/44x/warp.c printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); printk 87 arch/powerpc/platforms/44x/warp.c printk(KERN_INFO "Warp POST OK\n"); printk 150 arch/powerpc/platforms/44x/warp.c printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n"); printk 173 arch/powerpc/platforms/44x/warp.c printk(KERN_ERR __FILE__ ": Unable to find leds\n"); printk 204 arch/powerpc/platforms/44x/warp.c printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n"); printk 210 arch/powerpc/platforms/44x/warp.c printk(KERN_ERR __FILE__ printk 224 arch/powerpc/platforms/44x/warp.c printk(KERN_WARNING "Fan rotation error detected." printk 248 arch/powerpc/platforms/44x/warp.c printk(KERN_INFO "Warp DTM thread running.\n"); printk 176 arch/powerpc/platforms/4xx/cpm.c printk(KERN_WARNING printk 267 arch/powerpc/platforms/4xx/cpm.c printk(KERN_ERR "cpm: could not parse dcr property for %pOF\n", printk 276 arch/powerpc/platforms/4xx/cpm.c printk(KERN_ERR "cpm: failed to map dcr property for %pOF\n", printk 16 arch/powerpc/platforms/4xx/machine_check.c printk("Instruction"); printk 19 arch/powerpc/platforms/4xx/machine_check.c printk("Data"); printk 20 arch/powerpc/platforms/4xx/machine_check.c printk(" machine check in kernel mode.\n"); printk 86 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n", printk 130 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Ignored unsupported dma range" printk 155 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: dma-ranges(s) mismatch\n", hose->dn); printk 163 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: dma-ranges too small " printk 172 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: dma-ranges unaligned\n", hose->dn); printk 182 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: dma-ranges outside of 32 bits space\n", printk 192 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n", printk 194 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n", printk 196 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "DMA window size 0x%016llx\n", printk 234 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn); printk 266 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn); printk 291 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n", printk 332 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "%pOF: Port disabled via device-tree\n", np); printk 338 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get PCI config register base !", printk 344 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get PCI internal register base !", printk 359 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't map registers !", np); printk 421 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Resource out of range\n", printk 465 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn); printk 490 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n", printk 536 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get PCI-X config register base !", printk 542 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get PCI-X internal register base !", printk 565 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't map registers !", np); printk 688 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "PCIE%d: PGRST failed\n", printk 698 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); printk 710 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO printk 715 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING printk 718 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO printk 723 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); printk 756 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n"); printk 764 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n"); printk 772 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n"); printk 780 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n"); printk 788 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n"); printk 796 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n"); printk 816 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration " printk 834 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE: VCO output not locked\n"); printk 1099 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__); printk 1197 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n"); printk 1198 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n"); printk 1202 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n"); printk 1243 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't map internal config space !", printk 1379 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); printk 1382 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "PCIE%d: failed to get cfg space\n", printk 1396 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: link is up !\n", port->index); printk 1399 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index); printk 1444 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "PCIE: unknown host type %pOF\n", np); printk 1457 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "PCIE: failed to allocate ports array\n"); printk 1530 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: PLL not locked\n", printk 1537 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: VC0 not active\n", printk 1563 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "Warning! Probing bus %u" printk 1725 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn); printk 1801 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "%pOF: Too many ranges\n", printk 1828 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n", printk 1964 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't map external config space !", printk 1976 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't map internal config space !", printk 2057 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: successfully set as root-complex\n", printk 2063 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: successfully set as endpoint\n", printk 2093 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "PCIE: Can't find port number for %pOF\n", np); printk 2098 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "PCIE: port number out of range for %pOF\n", printk 2109 arch/powerpc/platforms/4xx/pci.c printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index); printk 2117 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "PCIE: missing sdr-base for %pOF\n", printk 2133 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "PCIE: missing or incorrect device_type for %pOF\n", printk 2140 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get PCI-E config space !", np); printk 2145 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get UTL register base !", np); printk 2152 arch/powerpc/platforms/4xx/pci.c printk(KERN_ERR "%pOF: Can't get DCR register base !", np); printk 2159 arch/powerpc/platforms/4xx/pci.c printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index); printk 49 arch/powerpc/platforms/4xx/soc.c printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", printk 55 arch/powerpc/platforms/4xx/soc.c printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", printk 64 arch/powerpc/platforms/4xx/soc.c printk(KERN_EMERG "L2C: LRU error\n"); printk 89 arch/powerpc/platforms/4xx/soc.c printk(KERN_ERR "%pOF: Can't get cache-size!\n", np); printk 98 arch/powerpc/platforms/4xx/soc.c printk(KERN_ERR "%pOF: Can't get DCR register base !", np); printk 108 arch/powerpc/platforms/4xx/soc.c printk(KERN_ERR "irq_of_parse_and_map failed\n"); printk 115 arch/powerpc/platforms/4xx/soc.c printk(KERN_ERR "Cannot install L2C error handler" printk 182 arch/powerpc/platforms/4xx/soc.c printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); printk 243 arch/powerpc/platforms/4xx/uic.c printk(KERN_ERR "uic: Device node %pOF has missing or invalid " printk 251 arch/powerpc/platforms/4xx/uic.c printk(KERN_ERR "uic: Device node %pOF has missing or invalid " printk 269 arch/powerpc/platforms/4xx/uic.c printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index, printk 30 arch/powerpc/platforms/512x/mpc5121_ads.c printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n"); printk 150 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n"); printk 168 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n"); printk 193 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n"); printk 349 arch/powerpc/platforms/512x/mpc512x_shared.c printk(KERN_ERR __FILE__ ": " printk 80 arch/powerpc/platforms/52xx/efika.c printk(KERN_WARNING EFIKA_PLATFORM_NAME printk 92 arch/powerpc/platforms/52xx/efika.c printk(KERN_WARNING EFIKA_PLATFORM_NAME printk 99 arch/powerpc/platforms/52xx/efika.c printk(KERN_WARNING EFIKA_PLATFORM_NAME printk 105 arch/powerpc/platforms/52xx/efika.c printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", printk 108 arch/powerpc/platforms/52xx/efika.c printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", printk 110 arch/powerpc/platforms/52xx/efika.c printk(" controlled by %pOF\n", pcictrl); printk 111 arch/powerpc/platforms/52xx/efika.c printk("\n"); printk 115 arch/powerpc/platforms/52xx/efika.c printk(KERN_WARNING EFIKA_PLATFORM_NAME printk 63 arch/powerpc/platforms/52xx/lite5200.c printk(KERN_ERR "%s() failed; expect abnormal behaviour\n", printk 98 arch/powerpc/platforms/52xx/lite5200.c printk(KERN_ERR "%s() failed. expect abnormal behavior\n", printk 74 arch/powerpc/platforms/52xx/lite5200_pm.c printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__); printk 211 arch/powerpc/platforms/52xx/media5200.c printk(KERN_ERR "%s() failed. expect abnormal behavior\n", printk 66 arch/powerpc/platforms/52xx/mpc52xx_common.c printk(KERN_ERR __FILE__ ": " printk 257 arch/powerpc/platforms/52xx/mpc52xx_common.c printk(KERN_ERR __FILE__ ": " printk 292 arch/powerpc/platforms/52xx/mpc52xx_pci.c printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__); printk 377 arch/powerpc/platforms/52xx/mpc52xx_pci.c printk(KERN_ERR "Can't get %pOF resources\n", node); printk 383 arch/powerpc/platforms/52xx/mpc52xx_pci.c printk(KERN_WARNING "Can't get %pOF bus-range, assume bus 0\n", printk 98 arch/powerpc/platforms/52xx/mpc52xx_pm.c printk(KERN_ALERT "%s: %i don't know how to wake up the board\n", printk 52 arch/powerpc/platforms/82xx/ep8248e.c printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); printk 266 arch/powerpc/platforms/82xx/ep8248e.c printk(KERN_ERR "No bcsr in device tree\n"); printk 272 arch/powerpc/platforms/82xx/ep8248e.c printk(KERN_ERR "Cannot map BCSR registers\n"); printk 37 arch/powerpc/platforms/82xx/mpc8272_ads.c printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); printk 144 arch/powerpc/platforms/82xx/mpc8272_ads.c printk(KERN_ERR "No bcsr in device tree\n"); printk 151 arch/powerpc/platforms/82xx/mpc8272_ads.c printk(KERN_ERR "Cannot map BCSR registers\n"); printk 65 arch/powerpc/platforms/82xx/pq2.c printk(KERN_ERR "No valid PCI reg property in device tree\n"); printk 125 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c printk(KERN_ERR "No pci pic node in device tree.\n"); printk 132 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c printk(KERN_ERR "No interrupt in pci pic node.\n"); printk 147 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c printk(KERN_ERR "Cannot map PCI PIC registers.\n"); printk 35 arch/powerpc/platforms/82xx/pq2fads.c printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); printk 127 arch/powerpc/platforms/82xx/pq2fads.c printk(KERN_ERR "No fsl,pq2fads-bcsr in device tree\n"); printk 134 arch/powerpc/platforms/82xx/pq2fads.c printk(KERN_ERR "Cannot map BCSR registers\n"); printk 50 arch/powerpc/platforms/83xx/misc.c printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n"); printk 62 arch/powerpc/platforms/83xx/mpc837x_mds.c printk(KERN_ERR "USB DR: unsupported PHY\n"); printk 63 arch/powerpc/platforms/83xx/usb.c printk(KERN_WARNING "834x USB PHY type not supported\n"); printk 74 arch/powerpc/platforms/83xx/usb.c printk(KERN_WARNING printk 81 arch/powerpc/platforms/83xx/usb.c printk(KERN_WARNING printk 200 arch/powerpc/platforms/83xx/usb.c printk(KERN_WARNING "831x USB PHY type not supported\n"); printk 227 arch/powerpc/platforms/83xx/usb.c printk(KERN_WARNING "837x USB PHY type not supported\n"); printk 43 arch/powerpc/platforms/85xx/c293pcie.c printk(KERN_INFO "C293 PCIE board from Freescale Semiconductor\n"); printk 72 arch/powerpc/platforms/85xx/common.c printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); printk 78 arch/powerpc/platforms/85xx/common.c printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n"); printk 73 arch/powerpc/platforms/85xx/ge_imp3a.c printk(KERN_WARNING "IMP3A: No FPGA PIC\n"); printk 120 arch/powerpc/platforms/85xx/ge_imp3a.c printk(KERN_WARNING "Unable to map board registers\n"); printk 128 arch/powerpc/platforms/85xx/ge_imp3a.c printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n"); printk 52 arch/powerpc/platforms/85xx/ksi8560.c printk(KERN_ERR "Can't find CPLD base, hang forever\n"); printk 135 arch/powerpc/platforms/85xx/ksi8560.c printk(KERN_ERR "Can't find CPLD in device tree\n"); printk 51 arch/powerpc/platforms/85xx/mpc8536_ds.c printk("MPC8536 DS board from Freescale Semiconductor\n"); printk 255 arch/powerpc/platforms/85xx/mpc85xx_cds.c printk(KERN_DEBUG "Could not find i8259 PIC\n"); printk 261 arch/powerpc/platforms/85xx/mpc85xx_cds.c printk(KERN_ERR "Failed to map cascade interrupt\n"); printk 275 arch/powerpc/platforms/85xx/mpc85xx_cds.c printk(KERN_ERR "Failed to setup cascade interrupt\n"); printk 39 arch/powerpc/platforms/85xx/mpc85xx_ds.c #define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 90 arch/powerpc/platforms/85xx/mpc85xx_ds.c printk(KERN_DEBUG "Could not find i8259 PIC\n"); printk 96 arch/powerpc/platforms/85xx/mpc85xx_ds.c printk(KERN_ERR "Failed to map cascade interrupt\n"); printk 158 arch/powerpc/platforms/85xx/mpc85xx_ds.c printk("MPC85xx DS board from Freescale Semiconductor\n"); printk 37 arch/powerpc/platforms/85xx/mpc85xx_rdb.c #define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 127 arch/powerpc/platforms/85xx/mpc85xx_rdb.c printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); printk 50 arch/powerpc/platforms/85xx/p1010rdb.c printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n"); printk 56 arch/powerpc/platforms/85xx/p1023_rdb.c printk(KERN_ERR printk 67 arch/powerpc/platforms/85xx/sbc8548.c printk("No HW-REV found in DTB.\n"); printk 52 arch/powerpc/platforms/85xx/sgy_cts1000.c printk(KERN_INFO "gpio-halt: triggering GPIO.\n"); printk 64 arch/powerpc/platforms/85xx/sgy_cts1000.c printk(KERN_INFO "gpio-halt: shutdown due to power button IRQ.\n"); printk 97 arch/powerpc/platforms/85xx/sgy_cts1000.c printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n", printk 112 arch/powerpc/platforms/85xx/sgy_cts1000.c printk(KERN_ERR "gpio-halt: error requesting IRQ %d for " printk 123 arch/powerpc/platforms/85xx/sgy_cts1000.c printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d" printk 448 arch/powerpc/platforms/85xx/smp.c printk(KERN_ERR "Unable to bring down secondary cpu(s)"); printk 53 arch/powerpc/platforms/85xx/socrates.c printk(KERN_ERR "Could not find socrates-fpga-pic node\n"); printk 59 arch/powerpc/platforms/85xx/xes_mpc85xx.c printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); printk 99 arch/powerpc/platforms/85xx/xes_mpc85xx.c printk(KERN_WARNING "xes_mpc85xx: Could not get " printk 125 arch/powerpc/platforms/85xx/xes_mpc85xx.c printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n", printk 42 arch/powerpc/platforms/86xx/gef_ppc9a.c #define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0) printk 61 arch/powerpc/platforms/86xx/gef_ppc9a.c printk(KERN_WARNING "PPC9A: No FPGA PIC\n"); printk 73 arch/powerpc/platforms/86xx/gef_ppc9a.c printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n"); printk 86 arch/powerpc/platforms/86xx/gef_ppc9a.c printk(KERN_WARNING "Unable to map board registers\n"); printk 166 arch/powerpc/platforms/86xx/gef_ppc9a.c printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); printk 42 arch/powerpc/platforms/86xx/gef_sbc310.c #define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0) printk 61 arch/powerpc/platforms/86xx/gef_sbc310.c printk(KERN_WARNING "SBC310: No FPGA PIC\n"); printk 72 arch/powerpc/platforms/86xx/gef_sbc310.c printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n"); printk 85 arch/powerpc/platforms/86xx/gef_sbc310.c printk(KERN_WARNING "Unable to map board registers\n"); printk 153 arch/powerpc/platforms/86xx/gef_sbc310.c printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); printk 42 arch/powerpc/platforms/86xx/gef_sbc610.c #define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0) printk 61 arch/powerpc/platforms/86xx/gef_sbc610.c printk(KERN_WARNING "SBC610: No FPGA PIC\n"); printk 73 arch/powerpc/platforms/86xx/gef_sbc610.c printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n"); printk 86 arch/powerpc/platforms/86xx/gef_sbc610.c printk(KERN_WARNING "Unable to map board registers\n"); printk 143 arch/powerpc/platforms/86xx/gef_sbc610.c printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); printk 301 arch/powerpc/platforms/86xx/mpc8610_hpcd.c printk(KERN_ERR "Err: can't map FPGA cfg register!\n"); printk 307 arch/powerpc/platforms/86xx/mpc8610_hpcd.c printk(KERN_ERR "Err: " printk 310 arch/powerpc/platforms/86xx/mpc8610_hpcd.c printk("MPC86xx HPCD board from Freescale Semiconductor\n"); printk 37 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c #define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) printk 67 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c printk("MPC86xx HPCN board from Freescale Semiconductor\n"); printk 52 arch/powerpc/platforms/86xx/pic.c printk(KERN_DEBUG "Could not find i8259 PIC\n"); printk 58 arch/powerpc/platforms/86xx/pic.c printk(KERN_ERR "Failed to map cascade interrupt\n"); printk 40 arch/powerpc/platforms/86xx/sbc8641d.c printk("SBC8641 board from Wind River\n"); printk 146 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); printk 172 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); printk 182 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); printk 191 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "Could not allocate CPM error IRQ!"); printk 206 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_CRIT "Could not map IMMR\n"); printk 259 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); printk 492 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n"); printk 504 arch/powerpc/platforms/8xx/cpm1.c printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n"); printk 127 arch/powerpc/platforms/8xx/ep88xc.c printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n"); printk 135 arch/powerpc/platforms/8xx/ep88xc.c printk(KERN_CRIT "Could not remap BCSR\n"); printk 37 arch/powerpc/platforms/8xx/m8xx_setup.c printk ("timebase_interrupt()\n"); printk 113 arch/powerpc/platforms/8xx/m8xx_setup.c printk(KERN_ERR "WARNING: Estimating processor frequency " printk 117 arch/powerpc/platforms/8xx/m8xx_setup.c printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); printk 232 arch/powerpc/platforms/8xx/m8xx_setup.c printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); printk 103 arch/powerpc/platforms/8xx/mpc86xads_setup.c printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n"); printk 111 arch/powerpc/platforms/8xx/mpc86xads_setup.c printk(KERN_CRIT "Could not remap BCSR\n"); printk 138 arch/powerpc/platforms/8xx/mpc885ads_setup.c printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n"); printk 147 arch/powerpc/platforms/8xx/mpc885ads_setup.c printk(KERN_CRIT "Could not remap BCSR\n"); printk 138 arch/powerpc/platforms/8xx/pic.c printk(KERN_ERR "Could not find fsl,pq1-pic node\n"); printk 154 arch/powerpc/platforms/8xx/pic.c printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n"); printk 39 arch/powerpc/platforms/amigaone/setup.c printk(KERN_INFO "Adding PCI host bridge %pOF\n", dev); printk 48 arch/powerpc/platforms/amigaone/setup.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume" printk 103 arch/powerpc/platforms/amigaone/setup.c printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" printk 141 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_WARNING "axon_msi: irq timed out\n"); printk 343 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_ERR "axon_msi: couldn't allocate msic for %pOF\n", printk 352 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_ERR printk 360 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_ERR "axon_msi: dcr_map failed for %pOF\n", printk 368 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_ERR "axon_msi: couldn't allocate fifo for %pOF\n", printk 375 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_ERR "axon_msi: irq parse and map failed for %pOF\n", printk 384 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %pOF\n", printk 411 arch/powerpc/platforms/cell/axon_msi.c printk(KERN_DEBUG "axon_msi: setup MSIC on %pOF\n", dn); printk 40 arch/powerpc/platforms/cell/cbe_powerbutton.c printk(KERN_ERR "%s: Not a cell blade.\n", __func__); printk 48 arch/powerpc/platforms/cell/cbe_powerbutton.c printk(KERN_ERR "%s: Not enough memory.\n", __func__); printk 72 arch/powerpc/platforms/cell/cbe_powerbutton.c printk(KERN_ERR "%s: Failed to register device\n", __func__); printk 80 arch/powerpc/platforms/cell/cbe_powerbutton.c printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__); printk 258 arch/powerpc/platforms/cell/cbe_regs.c printk(KERN_ERR "cbe_regs: More BE chips than supported" printk 84 arch/powerpc/platforms/cell/cpufreq_spudemand.c printk(KERN_ERR "cpu %d is not online\n", cpu); printk 89 arch/powerpc/platforms/cell/cpufreq_spudemand.c printk(KERN_ERR "no cpu specified in policy\n"); printk 140 arch/powerpc/platforms/cell/cpufreq_spudemand.c printk(KERN_ERR "registration of governor failed\n"); printk 183 arch/powerpc/platforms/cell/interrupt.c printk(KERN_ERR printk 293 arch/powerpc/platforms/cell/interrupt.c printk(KERN_INFO "IIC for CPU %d target id 0x%x : %pOF\n", printk 311 arch/powerpc/platforms/cell/interrupt.c printk(KERN_WARNING "IIC: CPU association not found\n"); printk 317 arch/powerpc/platforms/cell/interrupt.c printk(KERN_WARNING "IIC: Can't resolve addresses\n"); printk 239 arch/powerpc/platforms/cell/iommu.c printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat); printk 240 arch/powerpc/platforms/cell/iommu.c printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n", printk 246 arch/powerpc/platforms/cell/iommu.c printk(KERN_ERR " page=0x%016lx\n", printk 268 arch/powerpc/platforms/cell/iommu.c printk(KERN_ERR "iommu: can't get address for %pOF\n", printk 448 arch/powerpc/platforms/cell/iommu.c printk(KERN_WARNING "iommu: missing ioid for %pOF using 0\n", printk 625 arch/powerpc/platforms/cell/iommu.c printk(KERN_ERR "iommu: failed to get node for %pOF\n", printk 641 arch/powerpc/platforms/cell/iommu.c printk(KERN_ERR "iommu: too many IOMMUs detected ! (%pOF)\n", printk 749 arch/powerpc/platforms/cell/iommu.c printk(KERN_WARNING "iommu: force-enabled, dma window" printk 760 arch/powerpc/platforms/cell/iommu.c printk("iommu: disabled, direct DMA offset is 0x%lx\n", printk 998 arch/powerpc/platforms/cell/iommu.c printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx " printk 51 arch/powerpc/platforms/cell/pervasive.c printk(KERN_WARNING "%s: unknown configuration\n", printk 376 arch/powerpc/platforms/cell/pmu.c printk("ERROR: Unable to allocate irq for node %d\n", printk 384 arch/powerpc/platforms/cell/pmu.c printk("ERROR: Request for irq on node %d failed\n", printk 403 arch/powerpc/platforms/cell/pmu.c printk(KERN_WARNING "ERROR, unable to get existing irq %d " \ printk 38 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Global Checkstop FIR : 0x%016llx\n", printk 40 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Global Recoverable FIR : 0x%016llx\n", printk 42 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n", printk 47 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "IOC FIR : 0x%016llx\n", printk 56 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "System Error Interrupt on CPU %d !\n", cpu); printk 69 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Unhandled Maintenance interrupt on CPU %d !\n", cpu); printk 81 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Unhandled Thermal interrupt on CPU %d !\n", cpu); printk 89 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Machine Check Interrupt on CPU %d !\n", cpu); printk 127 arch/powerpc/platforms/cell/ras.c printk(KERN_WARNING "%s: no page on node %d\n", printk 138 arch/powerpc/platforms/cell/ras.c printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n", printk 145 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n", printk 195 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "%s: node %pOF is missing node-id?\n", printk 216 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "%s: error disabling PTCAL " printk 320 arch/powerpc/platforms/cell/ras.c printk(KERN_ERR "Can't disable PTCAL, so not enabling\n"); printk 78 arch/powerpc/platforms/cell/setup.c printk("*** %04x : %s\n", hex, s ? s : ""); printk 112 arch/powerpc/platforms/cell/setup.c printk(KERN_DEBUG "PCI: Hiding resources on Axon PCIE RC %s\n", printk 94 arch/powerpc/platforms/cell/smp.c printk(KERN_ERR "start-cpu failed: %i\n", status); printk 272 arch/powerpc/platforms/cell/spider-pic.c printk(KERN_ERR "spider_pic: failed to map cascade !"); printk 313 arch/powerpc/platforms/cell/spider-pic.c printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %pOF\n", printk 336 arch/powerpc/platforms/cell/spider-pic.c printk(KERN_WARNING "spider-pic: Failed\n"); printk 504 arch/powerpc/platforms/cell/spu_base.c printk(KERN_ERR "%s: can't create sysfs group '%s'\n", printk 551 arch/powerpc/platforms/cell/spu_base.c printk(KERN_ERR "Can't register SPU %d with sysfs\n", printk 728 arch/powerpc/platforms/cell/spu_base.c printk(KERN_ERR "Could not register SPU crash handler"); printk 773 arch/powerpc/platforms/cell/spu_base.c printk(KERN_WARNING "%s: Error initializing spus\n", printk 82 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_WARNING "%s: can't find node-id\n", __func__); printk 273 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_WARNING "%s: Error initializing %pOFn\n", printk 294 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_WARNING "SPE %pOF on node %d ignored," printk 296 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n"); printk 305 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_WARNING "%s: Legacy device tree found, " printk 310 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_ERR "Unable to map %s\n", printk 320 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_WARNING "%s: Legacy device tree found, " printk 325 arch/powerpc/platforms/cell/spu_manage.c printk(KERN_ERR "%s: could not map interrupts\n", printk 513 arch/powerpc/platforms/cell/spu_manage.c printk("No affinity configuration found\n"); printk 684 arch/powerpc/platforms/cell/spufs/inode.c printk(KERN_INFO "spufs: SPU isolation mode enabled\n"); printk 113 arch/powerpc/platforms/cell/spufs/run.c printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", printk 142 arch/powerpc/platforms/cell/spufs/run.c printk(KERN_ERR "%s: timeout waiting for loader\n", printk 302 arch/powerpc/platforms/cell/spufs/run.c printk(KERN_WARNING "%s: unexpected return code %ld\n", printk 29 arch/powerpc/platforms/chrp/nvram.c printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n", printk 50 arch/powerpc/platforms/chrp/nvram.c printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", printk 58 arch/powerpc/platforms/chrp/nvram.c printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); printk 85 arch/powerpc/platforms/chrp/nvram.c printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size); printk 147 arch/powerpc/platforms/chrp/pci.c printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start); printk 148 arch/powerpc/platforms/chrp/pci.c printk("Hydra Feature_Control was %x", printk 158 arch/powerpc/platforms/chrp/pci.c printk(", now %x\n", in_le32(&Hydra->Feature_Control)); printk 172 arch/powerpc/platforms/chrp/pci.c printk(KERN_ERR "No address for Python PCI controller\n"); printk 200 arch/powerpc/platforms/chrp/pci.c printk ("RTAS supporting Pegasos OF not found, please upgrade" printk 239 arch/powerpc/platforms/chrp/pci.c printk(KERN_WARNING "Can't use %pOF: no address\n", printk 245 arch/powerpc/platforms/chrp/pci.c printk(KERN_WARNING "Can't get bus-range for %pOF\n", printk 250 arch/powerpc/platforms/chrp/pci.c printk(KERN_INFO "PCI bus %d", bus_range[0]); printk 252 arch/powerpc/platforms/chrp/pci.c printk(KERN_INFO "PCI buses %d..%d", printk 254 arch/powerpc/platforms/chrp/pci.c printk(" controlled by %pOF", dev); printk 256 arch/powerpc/platforms/chrp/pci.c printk(" at %llx", (unsigned long long)r.start); printk 257 arch/powerpc/platforms/chrp/pci.c printk("\n"); printk 261 arch/powerpc/platforms/chrp/pci.c printk("Can't allocate PCI controller structure for %pOF\n", printk 301 arch/powerpc/platforms/chrp/pci.c printk("No methods for %pOF (model %s), using RTAS\n", printk 313 arch/powerpc/platforms/chrp/pci.c printk("pci_dram_offset = %lx\n", pci_dram_offset); printk 336 arch/powerpc/platforms/chrp/pci.c printk("W83C553: Switching SL82C105 IDE to PCI native mode\n"); printk 128 arch/powerpc/platforms/chrp/pegasos_eth.c printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n", printk 151 arch/powerpc/platforms/chrp/pegasos_eth.c printk("Pegasos II/Marvell MV64361: register unmapped\n"); printk 152 arch/powerpc/platforms/chrp/pegasos_eth.c printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE); printk 173 arch/powerpc/platforms/chrp/pegasos_eth.c printk("Pegasos II/Marvell MV64361: init\n"); printk 188 arch/powerpc/platforms/chrp/pegasos_eth.c printk("Pegasos II/Marvell MV64361: Can't enable the " printk 195 arch/powerpc/platforms/chrp/pegasos_eth.c printk("Pegasos II/Marvell MV64361: init is over\n"); printk 186 arch/powerpc/platforms/chrp/setup.c printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " printk 229 arch/powerpc/platforms/chrp/setup.c printk ("Pegasos l2cr : no cpu l2cr property found\n"); printk 233 arch/powerpc/platforms/chrp/setup.c printk ("Pegasos l2cr : L2 cache was not active, " printk 322 arch/powerpc/platforms/chrp/setup.c printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); printk 405 arch/powerpc/platforms/chrp/setup.c printk(KERN_INFO "OpenPIC at %lx\n", opaddr); printk 418 arch/powerpc/platforms/chrp/setup.c printk(KERN_ERR "Insufficient addresses for distributed" printk 425 arch/powerpc/platforms/chrp/setup.c printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", printk 434 arch/powerpc/platforms/chrp/setup.c printk(KERN_ERR "Failed to allocate MPIC structure\n"); printk 441 arch/powerpc/platforms/chrp/setup.c printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", printk 478 arch/powerpc/platforms/chrp/setup.c printk(KERN_ERR "i8259: Not found in device-tree" printk 500 arch/powerpc/platforms/chrp/setup.c printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" printk 511 arch/powerpc/platforms/chrp/setup.c printk(KERN_ERR "i8259: failed to map cascade irq\n"); printk 58 arch/powerpc/platforms/embedded6xx/holly.c printk(KERN_INFO "Remapping PCI bridge\n"); printk 131 arch/powerpc/platforms/embedded6xx/holly.c printk(KERN_INFO "PPC750GX/CL Platform\n"); printk 168 arch/powerpc/platforms/embedded6xx/holly.c printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__); printk 174 arch/powerpc/platforms/embedded6xx/holly.c printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__); printk 44 arch/powerpc/platforms/embedded6xx/linkstation.c printk("Adding PCI host bridge %pOF\n", dev); printk 48 arch/powerpc/platforms/embedded6xx/linkstation.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume" printk 73 arch/powerpc/platforms/embedded6xx/linkstation.c printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); printk 74 arch/powerpc/platforms/embedded6xx/linkstation.c printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); printk 45 arch/powerpc/platforms/embedded6xx/ls_uart.c printk("linkstation: disarming the AVR watchdog: "); printk 47 arch/powerpc/platforms/embedded6xx/ls_uart.c printk("%c", in_8(avr_addr + UART_RX)); printk 53 arch/powerpc/platforms/embedded6xx/ls_uart.c printk("\n"); printk 45 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c #define DBG(fmt...) do { printk(fmt); } while(0) printk 79 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); printk 80 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c printk(KERN_INFO printk 82 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c printk(KERN_INFO printk 120 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c printk("%s: No tsi108 pci node found !\n", __func__); printk 125 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c printk("%s: No tsi108 pci cascade node found !\n", __func__); printk 47 arch/powerpc/platforms/embedded6xx/storcenter.c printk("Adding PCI host bridge %pOF\n", dev); printk 75 arch/powerpc/platforms/embedded6xx/storcenter.c printk(KERN_INFO "IOMEGA StorCenter\n"); printk 28 arch/powerpc/platforms/maple/pci.c #define DBG(x...) printk(x) printk 72 arch/powerpc/platforms/maple/pci.c printk(KERN_WARNING "Can't get bus-range for %pOF\n", printk 501 arch/powerpc/platforms/maple/pci.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume bus 0\n", printk 526 arch/powerpc/platforms/maple/pci.c printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", printk 550 arch/powerpc/platforms/maple/pci.c printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n"); printk 600 arch/powerpc/platforms/maple/pci.c printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); printk 641 arch/powerpc/platforms/maple/pci.c printk("Failed to locate OF node for IDE %s\n", printk 647 arch/powerpc/platforms/maple/pci.c printk("Failed to map onboard IDE interrupt for channel %d\n", printk 76 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: Unable to translate NVRAM" printk 81 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n"); printk 86 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); printk 105 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); printk 116 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: Manual Restart Required\n"); printk 133 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); printk 144 arch/powerpc/platforms/maple/setup.c printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); printk 191 arch/powerpc/platforms/maple/setup.c printk(KERN_DEBUG "Using native/NAP idle loop\n"); printk 226 arch/powerpc/platforms/maple/setup.c printk(KERN_ERR printk 238 arch/powerpc/platforms/maple/setup.c printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n", printk 277 arch/powerpc/platforms/maple/setup.c printk("*** %04x : %s\n", hex, s ? s : ""); printk 313 arch/powerpc/platforms/maple/setup.c printk(KERN_ERR "%s: Unable to find memory-controller node\n", printk 322 arch/powerpc/platforms/maple/setup.c printk(KERN_ERR "%s: Unable to get memory-controller reg\n", printk 329 arch/powerpc/platforms/maple/setup.c printk(KERN_ERR "%s: Unable to map memory-controller memory\n", printk 338 arch/powerpc/platforms/maple/setup.c printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n", printk 347 arch/powerpc/platforms/maple/setup.c printk(KERN_INFO "%s: CPC925 platform device created\n", __func__); printk 33 arch/powerpc/platforms/maple/time.c #define DBG(x...) printk(x) printk 144 arch/powerpc/platforms/maple/time.c printk(KERN_EMERG "Maple: Unable to translate RTC" printk 149 arch/powerpc/platforms/maple/time.c printk(KERN_EMERG "Maple: RTC address isn't PIO!\n"); printk 153 arch/powerpc/platforms/maple/time.c printk(KERN_INFO "Maple: Found RTC at IO 0x%x\n", printk 159 arch/powerpc/platforms/maple/time.c printk(KERN_INFO "Maple: No device node for RTC, assuming " printk 59 arch/powerpc/platforms/pasemi/setup.c printk("Restarting...\n"); printk 313 arch/powerpc/platforms/pasemi/setup.c printk("[%04x] : %s\n", hex, s ? s : ""); printk 44 arch/powerpc/platforms/powermac/feature.c #define DBG(fmt...) printk(KERN_DEBUG fmt) printk 1177 arch/powerpc/platforms/powermac/feature.c printk(KERN_ERR "core99_usb_enable: " printk 2522 arch/powerpc/platforms/powermac/feature.c printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); printk 2539 arch/powerpc/platforms/powermac/feature.c printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); printk 2590 arch/powerpc/platforms/powermac/feature.c printk(KERN_INFO "Found %s memory controller & host bridge" printk 2594 arch/powerpc/platforms/powermac/feature.c printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); printk 2640 arch/powerpc/platforms/powermac/feature.c printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); printk 2641 arch/powerpc/platforms/powermac/feature.c printk(KERN_ERR "pmac_feature: %pOF skipped\n", node); printk 2646 arch/powerpc/platforms/powermac/feature.c printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n", printk 2652 arch/powerpc/platforms/powermac/feature.c printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n", printk 2658 arch/powerpc/platforms/powermac/feature.c printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n", printk 2679 arch/powerpc/platforms/powermac/feature.c printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", printk 2884 arch/powerpc/platforms/powermac/feature.c printk(KERN_WARNING "No mac-io chip found\n"); printk 2890 arch/powerpc/platforms/powermac/feature.c printk(KERN_WARNING "Unknown PowerMac !\n"); printk 2906 arch/powerpc/platforms/powermac/feature.c printk("%s: Unknown HT link frequency %x\n", name, freq); printk 2908 arch/powerpc/platforms/powermac/feature.c printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", printk 2927 arch/powerpc/platforms/powermac/feature.c printk("No PCI-X bridge found\n"); printk 2931 arch/powerpc/platforms/powermac/feature.c printk("PCI-X bridge found but not matched to pci\n"); printk 2936 arch/powerpc/platforms/powermac/feature.c printk("PCI-X bridge found but not matched to host\n"); printk 54 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_DEBUG "low_i2c:" x); \ printk 62 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_DEBUG "low_i2c:" x); \ printk 180 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \ printk 248 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_WARNING "low_i2c: Keywest got an out of state" printk 255 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_WARNING "low_i2c: Timeout in i2c transfer" printk 493 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_ERR "low_i2c: Can't allocate host for %pOF\n", printk 504 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_ERR "low_i2c: Can't find address for %pOF\n", printk 534 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_WARNING printk 540 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_ERR "low_i2c: Can't map registers for %pOF\n", printk 557 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %pOF\n", printk 590 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_INFO " channel %d bus %s\n", channel, printk 764 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_WARNING "low_i2c: PMU returned %d" printk 795 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_INFO "PMU i2c %pOF\n", busnode); printk 818 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_INFO " channel %d bus <multibus>\n", channel); printk 910 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_INFO "SMU i2c %pOF\n", controller); printk 941 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_INFO " channel %x bus %pOF\n", printk 1124 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_ERR "low_i2c: Invalid mode %d requested on" printk 1237 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_ERR "low_i2c: Can't find bus for %pOF (pfunc)\n", printk 1242 arch/powerpc/platforms/powermac/low_i2c.c printk(KERN_ERR "low_i2c: Can't open i2c bus for %pOF (pfunc)\n", printk 31 arch/powerpc/platforms/powermac/nvram.c #define DBG(x...) printk(x) printk 294 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: Sharp/Micron flash erase timeout !\n"); printk 305 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); printk 327 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n"); printk 339 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); printk 374 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: AMD flash erase timeout !\n"); printk 385 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: AMD flash erase failed !\n"); printk 416 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: AMD flash write timeout !\n"); printk 430 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: AMD flash write failed !\n"); printk 494 arch/powerpc/platforms/powermac/nvram.c printk("nvram: Error erasing bank %d\n", core99_bank); printk 499 arch/powerpc/platforms/powermac/nvram.c printk("nvram: Error writing bank %d\n", core99_bank); printk 514 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "nvram: no address\n"); printk 571 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "Can't find NVRAM device\n"); printk 618 arch/powerpc/platforms/powermac/nvram.c printk(KERN_ERR "Incompatible type of NVRAM\n"); printk 31 arch/powerpc/platforms/powermac/pci.c #define DBG(x...) printk(x) printk 468 arch/powerpc/platforms/powermac/pci.c printk(KERN_WARNING printk 471 arch/powerpc/platforms/powermac/pci.c printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); printk 484 arch/powerpc/platforms/powermac/pci.c printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); printk 516 arch/powerpc/platforms/powermac/pci.c printk(KERN_ERR "init_p2pbridge: couldn't read bridge" printk 542 arch/powerpc/platforms/powermac/pci.c printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); printk 593 arch/powerpc/platforms/powermac/pci.c printk("Found NEC PD720100A USB2 chip with disabled" printk 684 arch/powerpc/platforms/powermac/pci.c printk(KERN_WARNING "PCI: Too many ranges !\n"); printk 713 arch/powerpc/platforms/powermac/pci.c printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n"); printk 788 arch/powerpc/platforms/powermac/pci.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume" printk 816 arch/powerpc/platforms/powermac/pci.c printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:" printk 837 arch/powerpc/platforms/powermac/pci.c printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. " printk 907 arch/powerpc/platforms/powermac/pci.c printk(KERN_CRIT "pmac_pci_init: can't find root " printk 964 arch/powerpc/platforms/powermac/pci.c printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", printk 1120 arch/powerpc/platforms/powermac/pci.c printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n", printk 1125 arch/powerpc/platforms/powermac/pci.c printk(KERN_ERR "Rewrite of PROGIF failed !\n"); printk 1218 arch/powerpc/platforms/powermac/pci.c printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region); printk 15 arch/powerpc/platforms/powermac/pfunc_base.c #define DBG(fmt...) printk(fmt) printk 21 arch/powerpc/platforms/powermac/pfunc_core.c #define LOG_ERROR(fmt...) printk(fmt) printk 26 arch/powerpc/platforms/powermac/pfunc_core.c #define DBG(fmt...) printk(fmt) printk 83 arch/powerpc/platforms/powermac/pfunc_core.c printk("%s", title); printk 85 arch/powerpc/platforms/powermac/pfunc_core.c printk("%02x ", *((u8 *)blob)); printk 88 arch/powerpc/platforms/powermac/pfunc_core.c printk("\n"); printk 362 arch/powerpc/platforms/powermac/pic.c printk(KERN_INFO "irq: Found primary Apple PIC %pOF for %d irqs\n", printk 376 arch/powerpc/platforms/powermac/pic.c printk(KERN_INFO "irq: Found slave Apple PIC %pOF for %d irqs" printk 390 arch/powerpc/platforms/powermac/pic.c printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); printk 522 arch/powerpc/platforms/powermac/pic.c printk(KERN_ERR "Failed to setup slave MPIC\n"); printk 179 arch/powerpc/platforms/powermac/setup.c printk("WARNING ! Your machine is CUDA-based but your kernel\n"); printk 180 arch/powerpc/platforms/powermac/setup.c printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n"); printk 193 arch/powerpc/platforms/powermac/setup.c printk("WARNING ! Your machine is PMU-based but your kernel\n"); printk 194 arch/powerpc/platforms/powermac/setup.c printk(" wasn't compiled with CONFIG_ADB_PMU option !\n"); printk 232 arch/powerpc/platforms/powermac/setup.c printk(KERN_INFO "Level 2 cache enabled\n"); printk 258 arch/powerpc/platforms/powermac/setup.c printk(KERN_INFO "L2CR overridden (0x%x), " printk 417 arch/powerpc/platforms/powermac/smp.c printk(KERN_ERR "Couldn't get primary IPI interrupt"); printk 532 arch/powerpc/platforms/powermac/smp.c printk("Cypress Timebase %s rc: %d\n", printk 560 arch/powerpc/platforms/powermac/smp.c printk(KERN_ERR "Pulsar Timebase %s rc: %d\n", printk 611 arch/powerpc/platforms/powermac/smp.c printk(KERN_ERR "Failed top open i2c bus for clock" printk 615 arch/powerpc/platforms/powermac/smp.c printk(KERN_INFO "Processor timebase sync using %s i2c clock\n", printk 675 arch/powerpc/platforms/powermac/smp.c printk("CPU0: L2CR is %lx\n", core99_l2_cache); printk 677 arch/powerpc/platforms/powermac/smp.c printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR()); printk 680 arch/powerpc/platforms/powermac/smp.c printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache); printk 688 arch/powerpc/platforms/powermac/smp.c printk("CPU0: L3CR is %lx\n", core99_l3_cache); printk 690 arch/powerpc/platforms/powermac/smp.c printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR()); printk 693 arch/powerpc/platforms/powermac/smp.c printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); printk 715 arch/powerpc/platforms/powermac/smp.c printk(KERN_INFO "Processor timebase sync using" printk 736 arch/powerpc/platforms/powermac/smp.c printk(KERN_INFO "Processor timebase sync using" printk 746 arch/powerpc/platforms/powermac/smp.c printk(KERN_INFO "Processor timebase sync using software\n"); printk 775 arch/powerpc/platforms/powermac/smp.c printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus); printk 952 arch/powerpc/platforms/powermac/smp.c printk(KERN_INFO "CPU#%d offline\n", cpu); printk 42 arch/powerpc/platforms/powermac/time.c #define DBG(x...) printk(x) printk 80 arch/powerpc/platforms/powermac/time.c printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60, printk 188 arch/powerpc/platforms/powermac/time.c printk(KERN_ERR "Failed to map VIA for timer calibration !\n"); printk 75 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s Unknown Core check stop.\n", level); printk 79 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s CPU PIR: %08x\n", level, printk 84 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s [Unit: %-3s] %s\n", level, printk 126 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s Unknown NX check stop.\n", level); printk 130 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s NX checkstop on CHIP ID: %x\n", level, printk 135 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s [Unit: %-3s] %s\n", level, printk 150 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s NPU checkstop on chip %x\n", level, printk 170 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s NPU checkstop on chip %x: FIR%d bit %d is set\n", printk 192 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s Unknown Malfunction Alert of type %d\n", printk 243 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s%s Hypervisor Maintenance interrupt [%s]\n", printk 250 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s Error detail: %s\n", level, error_info); printk 251 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s HMER: %016llx\n", level, be64_to_cpu(hmi_evt->hmer)); printk 254 arch/powerpc/platforms/powernv/opal-hmi.c printk("%s TFMR: %016llx\n", level, printk 80 arch/powerpc/platforms/powernv/pci-ioda.c printk("%spci %s: [PE# %.2x] %pV", printk 326 arch/powerpc/platforms/powernv/setup.c printk(KERN_INFO "kexec: waiting for cpu %d " printk 338 arch/powerpc/platforms/powernv/setup.c printk(KERN_ERR "kexec: timed out waiting for " printk 335 arch/powerpc/platforms/ps3/device-init.c printk(KERN_ERR "%s:%u: _read_stor_dev_info failed %d\n", printk 363 arch/powerpc/platforms/ps3/device-init.c printk(KERN_ERR "%s:%u: find_interrupt failed %d\n", __func__, printk 378 arch/powerpc/platforms/ps3/device-init.c printk(KERN_ERR printk 911 arch/powerpc/platforms/ps3/device-init.c printk(KERN_ERR "%s: Cannot find bus (%d)\n", __func__, result); printk 918 arch/powerpc/platforms/ps3/device-init.c printk(KERN_ERR "%s: read_bus_id failed %d\n", __func__, printk 928 arch/powerpc/platforms/ps3/device-init.c printk(KERN_ERR "%s: kthread_run failed %d\n", __func__, printk 100 arch/powerpc/platforms/ps3/setup.c printk("\n"); printk 101 arch/powerpc/platforms/ps3/setup.c printk(" System does not reboot automatically.\n"); printk 102 arch/powerpc/platforms/ps3/setup.c printk(" Please press POWER button.\n"); printk 103 arch/powerpc/platforms/ps3/setup.c printk("\n"); printk 122 arch/powerpc/platforms/ps3/setup.c printk(KERN_INFO "%s: %lu bytes at %p\n", p->name, p->size, printk 193 arch/powerpc/platforms/ps3/setup.c printk(KERN_INFO "PS3 firmware version %u.%u.%u\n", printk 218 arch/powerpc/platforms/ps3/setup.c printk("*** %04x : %s\n", hex, s ? s : ""); printk 416 arch/powerpc/platforms/ps3/spu.c printk(KERN_WARNING "%s:%d: Error initializing spus\n", printk 80 arch/powerpc/platforms/pseries/cmm.c #define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); } printk 225 arch/powerpc/platforms/pseries/dlpar.c printk(KERN_ERR "Unexpected Error (%d) " printk 252 arch/powerpc/platforms/pseries/dlpar.c printk(KERN_ERR "Failed to add device node %pOF\n", dn); printk 137 arch/powerpc/platforms/pseries/dtl.c printk(KERN_WARNING "%s: DTL registration for cpu %d (hw %d) " printk 190 arch/powerpc/platforms/pseries/dtl.c printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n", printk 349 arch/powerpc/platforms/pseries/dtl.c printk(KERN_WARNING "%s: can't create dtl root dir\n", printk 360 arch/powerpc/platforms/pseries/dtl.c printk(KERN_WARNING "%s: can't create dtl files\n", __func__); printk 94 arch/powerpc/platforms/pseries/hotplug-cpu.c printk("cpu %u (hwid %u) Ready to die...\n", printk 224 arch/powerpc/platforms/pseries/hotplug-cpu.c printk("Querying DEAD? cpu %i (%i) shows %i\n", printk 271 arch/powerpc/platforms/pseries/hotplug-cpu.c printk(KERN_ERR "Cannot add cpu %pOF; this system configuration" printk 285 arch/powerpc/platforms/pseries/hotplug-cpu.c printk(KERN_ERR "Unable to find space in cpu_present_mask for" printk 335 arch/powerpc/platforms/pseries/hotplug-cpu.c printk(KERN_WARNING "Could not find cpu to remove " printk 374 arch/powerpc/platforms/pseries/hotplug-cpu.c printk(KERN_WARNING "Could not find cpu to online " printk 556 arch/powerpc/platforms/pseries/hotplug-cpu.c printk(KERN_WARNING "Could not find cpu to offline with physical id 0x%x\n", thread); printk 951 arch/powerpc/platforms/pseries/hotplug-cpu.c printk(KERN_INFO "CPU Hotplug not supported by firmware " printk 167 arch/powerpc/platforms/pseries/hvcserver.c printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to" printk 200 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_ERR "%s: failed to create device (%i)", printk 279 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_WARNING "%s: %s has already been probed\n", printk 289 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_WARNING "%s: no such device node: %s\n", printk 319 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_WARNING "%s: %s not on the bus\n", printk 440 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_INFO "IBM eBus Device Driver\n"); printk 444 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_ERR "%s: failed to register IBM eBus.\n", printk 451 arch/powerpc/platforms/pseries/ibmebus.c printk(KERN_WARNING "%s: device_register returned %i\n", printk 166 arch/powerpc/platforms/pseries/iommu.c printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); printk 167 arch/powerpc/platforms/pseries/iommu.c printk("\tindex = 0x%llx\n", (u64)liobn); printk 168 arch/powerpc/platforms/pseries/iommu.c printk("\ttcenum = 0x%llx\n", (u64)tcenum); printk 169 arch/powerpc/platforms/pseries/iommu.c printk("\ttce val = 0x%llx\n", tce ); printk 257 arch/powerpc/platforms/pseries/iommu.c printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); printk 258 arch/powerpc/platforms/pseries/iommu.c printk("\tindex = 0x%llx\n", (u64)tbl->it_index); printk 259 arch/powerpc/platforms/pseries/iommu.c printk("\tnpages = 0x%llx\n", (u64)npages); printk 260 arch/powerpc/platforms/pseries/iommu.c printk("\ttce[0] val = 0x%llx\n", tcep[0]); printk 274 arch/powerpc/platforms/pseries/iommu.c printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); printk 275 arch/powerpc/platforms/pseries/iommu.c printk("\tindex = 0x%llx\n", (u64)liobn); printk 276 arch/powerpc/platforms/pseries/iommu.c printk("\ttcenum = 0x%llx\n", (u64)tcenum); printk 295 arch/powerpc/platforms/pseries/iommu.c printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); printk 296 arch/powerpc/platforms/pseries/iommu.c printk("\trc = %lld\n", rc); printk 297 arch/powerpc/platforms/pseries/iommu.c printk("\tindex = 0x%llx\n", (u64)tbl->it_index); printk 298 arch/powerpc/platforms/pseries/iommu.c printk("\tnpages = 0x%llx\n", (u64)npages); printk 311 arch/powerpc/platforms/pseries/iommu.c printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc); printk 312 arch/powerpc/platforms/pseries/iommu.c printk("\tindex = 0x%llx\n", (u64)tbl->it_index); printk 313 arch/powerpc/platforms/pseries/iommu.c printk("\ttcenum = 0x%llx\n", (u64)tcenum); printk 493 arch/powerpc/platforms/pseries/iommu.c printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %pOF has " printk 754 arch/powerpc/platforms/pseries/iommu.c printk(KERN_WARNING "iommu: Device %s has no iommu table\n", printk 763 arch/powerpc/platforms/pseries/iommu.c printk(KERN_INFO "ppc iommu: disabling ddw.\n"); printk 1174 arch/powerpc/platforms/pseries/iommu.c printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: " printk 1345 arch/powerpc/platforms/pseries/iommu.c printk(KERN_INFO "Disabling MULTITCE firmware feature\n"); printk 296 arch/powerpc/platforms/pseries/lparcfg.c printk(KERN_ERR "%s %s kmalloc failure at line %d\n", printk 313 arch/powerpc/platforms/pseries/lparcfg.c printk(KERN_INFO printk 321 arch/powerpc/platforms/pseries/lparcfg.c printk(KERN_ERR "%s %s kmalloc failure at line %d\n", printk 327 arch/powerpc/platforms/pseries/lparcfg.c printk(KERN_INFO "success calling get-system-parameter\n"); printk 378 arch/powerpc/platforms/pseries/lparcfg.c printk(KERN_ERR "cpus_dn %p\n", cpus_dn); printk 718 arch/powerpc/platforms/pseries/lparcfg.c printk(KERN_ERR "Failed to create powerpc/lparcfg\n"); printk 205 arch/powerpc/platforms/pseries/mobility.c printk(KERN_ERR "Could not update %s" printk 337 arch/powerpc/platforms/pseries/mobility.c printk(KERN_ERR "Could not make post-mobility " printk 347 arch/powerpc/platforms/pseries/mobility.c printk(KERN_ERR "Post-mobility activate-fw failed: %d\n", rc); printk 364 arch/powerpc/platforms/pseries/mobility.c printk(KERN_ERR "Post-mobility device tree update " printk 175 arch/powerpc/platforms/pseries/nvram.c printk(KERN_ERR "nvram_clear_error_log: Failed nvram_write (%d)\n", rc); printk 232 arch/powerpc/platforms/pseries/nvram.c printk(KERN_INFO "PPC64 nvram contains %d bytes\n", nvram_size); printk 274 arch/powerpc/platforms/pseries/pci.c printk("Using INTC for W82c105 IDE controller.\n"); printk 86 arch/powerpc/platforms/pseries/pci_dlpar.c printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", printk 106 arch/powerpc/platforms/pseries/pseries_energy.c printk(KERN_WARNING "cpu_to_drc_index(%d) failed", cpu); printk 177 arch/powerpc/platforms/pseries/pseries_energy.c printk(KERN_WARNING "drc_index_to_cpu(%d) failed", drc_index); printk 432 arch/powerpc/platforms/pseries/ras.c printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]); printk 463 arch/powerpc/platforms/pseries/ras.c printk(KERN_ERR "FWNMI: nmi-interlock failed: %d\n", ret); printk 679 arch/powerpc/platforms/pseries/ras.c printk(KERN_ERR "MCE: limited recovery, system may " printk 48 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "Failed to add device node %s\n", path); printk 123 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "property parse failed in %s at line %d\n", printk 130 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "property parse failed in %s at line %d\n", printk 139 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "property parse failed in %s at line %d\n", printk 144 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "property parse failed in %s at line %d\n", printk 153 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "property parse failed in %s at line %d\n", printk 158 arch/powerpc/platforms/pseries/reconfig.c printk(KERN_ERR "property parse failed in %s at line %d\n", printk 58 arch/powerpc/platforms/pseries/scanlog.c printk(KERN_ERR "scanlog: cannot perform a small read (%ld)\n", count); printk 98 arch/powerpc/platforms/pseries/scanlog.c printk(KERN_ERR "scanlog: unknown error " \ printk 191 arch/powerpc/platforms/pseries/setup.c printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); printk 197 arch/powerpc/platforms/pseries/setup.c printk(KERN_ERR "pic: failed to map cascade interrupt"); printk 218 arch/powerpc/platforms/pseries/setup.c printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); printk 968 arch/powerpc/platforms/pseries/setup.c printk(KERN_INFO "RTAS power-off returned %d\n", rc); printk 971 arch/powerpc/platforms/pseries/setup.c printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); printk 70 arch/powerpc/platforms/pseries/smp.c printk(KERN_ERR printk 125 arch/powerpc/platforms/pseries/smp.c printk(KERN_ERR "start-cpu failed: %i\n", status); printk 176 arch/powerpc/platforms/pseries/smp.c printk(KERN_ERR "Error: Prod to wake up processor %d " printk 905 arch/powerpc/platforms/pseries/vio.c printk(KERN_ERR "%s: unable to determine system IO "\ printk 918 arch/powerpc/platforms/pseries/vio.c printk(KERN_ERR "%s: insufficient system entitlement\n", printk 1438 arch/powerpc/platforms/pseries/vio.c printk(KERN_ERR "%s: failed to register device %s\n", printk 1496 arch/powerpc/platforms/pseries/vio.c printk(KERN_ERR "failed to register VIO bus\n"); printk 1506 arch/powerpc/platforms/pseries/vio.c printk(KERN_WARNING "%s: device_register returned %i\n", printk 1688 arch/powerpc/platforms/pseries/vio.c printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc); printk 1697 arch/powerpc/platforms/pseries/vio.c printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc); printk 97 arch/powerpc/sysdev/cpm2.c printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); printk 239 arch/powerpc/sysdev/cpm2.c printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n"); printk 303 arch/powerpc/sysdev/cpm2.c printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n"); printk 266 arch/powerpc/sysdev/cpm2_pic.c printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); printk 260 arch/powerpc/sysdev/dart_iommu.c printk(KERN_INFO "DART table allocated at: %p\n", dart_tablebase); printk 322 arch/powerpc/sysdev/dart_iommu.c printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n", printk 413 arch/powerpc/sysdev/fsl_msi.c printk(KERN_DEBUG "Setting up Freescale MSI support\n"); printk 539 arch/powerpc/sysdev/fsl_pci.c printk(KERN_WARNING "Can't get pci register base!"); printk 546 arch/powerpc/sysdev/fsl_pci.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume" printk 619 arch/powerpc/sysdev/fsl_pci.c printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " printk 816 arch/powerpc/sysdev/fsl_pci.c printk(KERN_WARNING "Can't get pci register base!\n"); printk 823 arch/powerpc/sysdev/fsl_pci.c printk(KERN_WARNING printk 847 arch/powerpc/sysdev/fsl_pci.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume" printk 868 arch/powerpc/sysdev/fsl_pci.c printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " printk 907 arch/powerpc/sysdev/fsl_pci.c printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); printk 769 arch/powerpc/sysdev/fsl_rio.c printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n", printk 958 arch/powerpc/sysdev/fsl_rmu.c printk(KERN_ERR printk 1001 arch/powerpc/sysdev/fsl_rmu.c printk(KERN_ERR printk 1035 arch/powerpc/sysdev/fsl_rmu.c printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); printk 1053 arch/powerpc/sysdev/fsl_rmu.c printk(KERN_ERR printk 1104 arch/powerpc/sysdev/fsl_rmu.c printk(KERN_INFO "%pOF: txirq: %d, rxirq %d\n", printk 181 arch/powerpc/sysdev/fsl_soc.c printk (KERN_ERR "Error: reset control " printk 31 arch/powerpc/sysdev/ge/ge_pic.c #define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0) printk 210 arch/powerpc/sysdev/ge/ge_pic.c printk(KERN_ERR "SBC610: failed to map cascade interrupt"); printk 265 arch/powerpc/sysdev/i8259.c printk(KERN_ERR "i8259: failed to allocate irq host !\n"); printk 281 arch/powerpc/sysdev/i8259.c printk(KERN_INFO "i8259 legacy interrupt controller initialized\n"); printk 610 arch/powerpc/sysdev/ipic.c printk(KERN_ERR "ipic: sense type 0x%x not supported\n", printk 616 arch/powerpc/sysdev/ipic.c printk(KERN_ERR "ipic: edge sense not supported on internal " printk 764 arch/powerpc/sysdev/ipic.c printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS, printk 882 arch/powerpc/sysdev/ipic.c printk(KERN_DEBUG "Registering ipic system core operations\n"); printk 108 arch/powerpc/sysdev/mmio_nvram.c printk(KERN_WARNING "nvram: no node found in device-tree\n"); printk 114 arch/powerpc/sysdev/mmio_nvram.c printk(KERN_WARNING "nvram: failed to get address (err %d)\n", printk 121 arch/powerpc/sysdev/mmio_nvram.c printk(KERN_WARNING "nvram: address or length is 0\n"); printk 128 arch/powerpc/sysdev/mmio_nvram.c printk(KERN_WARNING "nvram: failed to ioremap\n"); printk 133 arch/powerpc/sysdev/mmio_nvram.c printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n", printk 45 arch/powerpc/sysdev/mpic.c #define DBG(fmt...) printk(fmt) printk 357 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: Detected reversed IPI registers\n"); printk 475 arch/powerpc/sysdev/mpic.c printk(KERN_DEBUG "mpic: - HT:%02x.%x %s MSI mapping found @ 0x%llx\n", printk 514 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x" printk 544 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); printk 679 arch/powerpc/sysdev/mpic.c printk(KERN_ERR "%s: timeout on hwirq %u\n", printk 701 arch/powerpc/sysdev/mpic.c printk(KERN_ERR "%s: timeout on hwirq %u\n", printk 1419 arch/powerpc/sysdev/mpic.c printk(KERN_DEBUG "mpic: Resetting\n"); printk 1513 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx," printk 1516 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", printk 1556 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources); printk 1652 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "%pOF: hooking up to IRQ %d\n", printk 1849 arch/powerpc/sysdev/mpic.c printk(KERN_INFO "mpic: requesting IPIs...\n"); printk 1855 arch/powerpc/sysdev/mpic.c printk(KERN_ERR "Failed to map %s\n", smp_ipi_name[i]); printk 1871 arch/powerpc/sysdev/mpic.c printk("SMP %d: smp_message_pass: unknown msg %d\n", printk 166 arch/powerpc/sysdev/mpic_u3msi.c printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", printk 90 arch/powerpc/sysdev/msi_bitmap.c printk(KERN_WARNING "msi_bitmap: Malformed msi-available-ranges" printk 267 arch/powerpc/sysdev/msi_bitmap.c printk(KERN_DEBUG "Running MSI bitmap self-tests ...\n"); printk 36 arch/powerpc/sysdev/of_rtc.c printk(KERN_ERR "OF RTC: Out of memory " printk 44 arch/powerpc/sysdev/of_rtc.c printk(KERN_ERR "OF RTC: Error " printk 50 arch/powerpc/sysdev/of_rtc.c printk(KERN_INFO "OF_RTC: %pOF is a %s @ 0x%llx-0x%llx\n", printk 53 arch/powerpc/sysdev/pmi.c printk(KERN_WARNING "pmi: got unexpected ACK message.\n"); printk 59 arch/powerpc/sysdev/pmi.c printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type); printk 118 arch/powerpc/sysdev/pmi.c printk(KERN_ERR "pmi: driver has already been initialized.\n"); printk 125 arch/powerpc/sysdev/pmi.c printk(KERN_ERR "pmi: could not allocate memory.\n"); printk 132 arch/powerpc/sysdev/pmi.c printk(KERN_ERR "pmi: invalid register address.\n"); printk 149 arch/powerpc/sysdev/pmi.c printk(KERN_ERR "pmi: invalid interrupt.\n"); printk 156 arch/powerpc/sysdev/pmi.c printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n", printk 161 arch/powerpc/sysdev/pmi.c printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg); printk 31 arch/powerpc/sysdev/tsi108_dev.c #define DBG(fmt...) do { printk(fmt); } while(0) printk 30 arch/powerpc/sysdev/tsi108_pci.c #define DBG(x...) printk(x) printk 63 arch/powerpc/sysdev/tsi108_pci.c printk("PCI CFG write : "); printk 64 arch/powerpc/sysdev/tsi108_pci.c printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); printk 65 arch/powerpc/sysdev/tsi108_pci.c printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); printk 66 arch/powerpc/sysdev/tsi108_pci.c printk("data = 0x%08x\n", val); printk 164 arch/powerpc/sysdev/tsi108_pci.c printk("PCI CFG read : "); printk 165 arch/powerpc/sysdev/tsi108_pci.c printk("%d:0x%x:0x%x ", bus->number, devfn, offset); printk 166 arch/powerpc/sysdev/tsi108_pci.c printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); printk 167 arch/powerpc/sysdev/tsi108_pci.c printk("data = 0x%x\n", *val); printk 203 arch/powerpc/sysdev/tsi108_pci.c printk(KERN_WARNING "Can't get bus-range for %pOF, assume" printk 210 arch/powerpc/sysdev/tsi108_pci.c printk("PCI Host bridge init failed\n"); printk 219 arch/powerpc/sysdev/tsi108_pci.c printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " printk 305 arch/powerpc/sysdev/tsi108_pci.c printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); printk 311 arch/powerpc/sysdev/tsi108_pci.c printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); printk 315 arch/powerpc/sysdev/tsi108_pci.c printk("cfg_ctl=0x%08x ", temp); printk 319 arch/powerpc/sysdev/tsi108_pci.c printk("irp_enable=0x%08x\n", temp); printk 409 arch/powerpc/sysdev/tsi108_pci.c printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n"); printk 196 arch/powerpc/sysdev/xics/icp-opal.c printk("XICS: Using OPAL ICP fallbacks\n"); printk 56 arch/powerpc/sysdev/xics/ics-rtas.c printk(KERN_ERR printk 65 arch/powerpc/sysdev/xics/ics-rtas.c printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n", printk 96 arch/powerpc/sysdev/xics/ics-rtas.c printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n", printk 105 arch/powerpc/sysdev/xics/ics-rtas.c printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n", printk 137 arch/powerpc/sysdev/xics/ics-rtas.c printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n", printk 153 arch/powerpc/sysdev/xics/ics-rtas.c printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n", printk 227 arch/powerpc/sysdev/xics/xics-common.c printk(KERN_ERR "%s: Can't find server for irq %d\n", printk 181 arch/powerpc/xmon/nonstdio.c printk("%s", xmon_outbuf); printk 406 arch/s390/include/asm/debug.h #define PRINT_DEBUG(x...) printk(KERN_DEBUG PRINTK_HEADER x) printk 407 arch/s390/include/asm/debug.h #define PRINT_INFO(x...) printk(KERN_INFO PRINTK_HEADER x) printk 408 arch/s390/include/asm/debug.h #define PRINT_WARN(x...) printk(KERN_WARNING PRINTK_HEADER x) printk 409 arch/s390/include/asm/debug.h #define PRINT_ERR(x...) printk(KERN_ERR PRINTK_HEADER x) printk 412 arch/s390/include/asm/debug.h #define PRINT_DEBUG(x...) printk(KERN_DEBUG PRINTK_HEADER x) printk 413 arch/s390/include/asm/debug.h #define PRINT_INFO(x...) printk(KERN_DEBUG PRINTK_HEADER x) printk 414 arch/s390/include/asm/debug.h #define PRINT_WARN(x...) printk(KERN_DEBUG PRINTK_HEADER x) printk 415 arch/s390/include/asm/debug.h #define PRINT_ERR(x...) printk(KERN_DEBUG PRINTK_HEADER x) printk 416 arch/s390/include/asm/debug.h #define PRINT_FATAL(x...) printk(KERN_DEBUG PRINTK_HEADER x) printk 26 arch/s390/include/asm/hardirq.h printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); printk 69 arch/s390/include/asm/pgtable.h printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e)) printk 71 arch/s390/include/asm/pgtable.h printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e)) printk 73 arch/s390/include/asm/pgtable.h printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e)) printk 75 arch/s390/include/asm/pgtable.h printk("%s:%d: bad p4d %p.\n", __FILE__, __LINE__, (void *) p4d_val(e)) printk 77 arch/s390/include/asm/pgtable.h printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e)) printk 512 arch/s390/kernel/dis.c printk("%s Code: Bad PSW.\n", mode); printk 577 arch/s390/kernel/dis.c printk("%s", buffer); printk 130 arch/s390/kernel/dumpstack.c printk("Call Trace:\n"); printk 134 arch/s390/kernel/dumpstack.c printk(state.reliable ? " [<%016lx>] %pSR \n" : printk 142 arch/s390/kernel/dumpstack.c printk("Last Breaking-Event-Address:\n"); printk 143 arch/s390/kernel/dumpstack.c printk(" [<%016lx>] %pSR\n", regs->args[0], (void *)regs->args[0]); printk 152 arch/s390/kernel/dumpstack.c printk("%s PSW : %px %px", mode, (void *)regs->psw.mask, (void *)regs->psw.addr); printk 156 arch/s390/kernel/dumpstack.c printk(" R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x " printk 160 arch/s390/kernel/dumpstack.c printk("%s GPRS: %016lx %016lx %016lx %016lx\n", mode, printk 162 arch/s390/kernel/dumpstack.c printk(" %016lx %016lx %016lx %016lx\n", printk 164 arch/s390/kernel/dumpstack.c printk(" %016lx %016lx %016lx %016lx\n", printk 166 arch/s390/kernel/dumpstack.c printk(" %016lx %016lx %016lx %016lx\n", printk 193 arch/s390/kernel/dumpstack.c printk("%s: %04x ilc:%d [#%d] ", str, regs->int_code & 0xffff, printk 27 arch/s390/kernel/module.c #define DEBUGP printk printk 127 arch/s390/kernel/module.c printk(KERN_ERR "module %s: no symbol table\n", me->name); printk 401 arch/s390/kernel/module.c printk(KERN_ERR "module %s: unknown relocation: %u\n", printk 406 arch/s390/kernel/module.c printk(KERN_ERR "module %s: relocation error for symbol %s " printk 178 arch/s390/kernel/nmi.c printk(KERN_EMERG "mcck: Terminating task because of machine " printk 180 arch/s390/kernel/nmi.c printk(KERN_EMERG "mcck: task: %s, pid: %d.\n", printk 469 arch/s390/kernel/sysinfo.c printk(KERN_DEBUG "Calibrating delay loop (skipped)... " printk 251 arch/s390/kernel/traps.c printk("Kernel stack overflow.\n"); printk 220 arch/s390/mm/fault.c printk(KERN_ALERT "User process fault: interruption code %04x ilc:%d ", printk 223 arch/s390/mm/fault.c printk(KERN_CONT "\n"); printk 268 arch/s390/mm/fault.c printk(KERN_ALERT "Unable to handle kernel pointer dereference" printk 271 arch/s390/mm/fault.c printk(KERN_ALERT "Unable to handle kernel paging request" printk 419 arch/s390/numa/mode_emu.c printk(KERN_DEBUG "NUMA node to core mapping\n"); printk 421 arch/s390/numa/mode_emu.c printk(KERN_DEBUG " node %3d: ", nid); printk 424 arch/s390/numa/mode_emu.c printk(KERN_CONT "%d ", cid); printk 426 arch/s390/numa/mode_emu.c printk(KERN_CONT "\n"); printk 137 arch/sh/boards/board-apsh4a3a.c printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n"); printk 240 arch/sh/boards/board-magicpanelr2.c printk(KERN_INFO "Magic Panel Release 2 A.%i\n", printk 244 arch/sh/boards/board-magicpanelr2.c printk(KERN_WARNING "Ethernet not ready\n"); printk 98 arch/sh/boards/board-polaris.c printk(KERN_INFO "Configuring Polaris external bus\n"); printk 32 arch/sh/boards/board-secureedge5410.c printk("SnapGear: erase switch interrupt!\n"); printk 41 arch/sh/boards/board-secureedge5410.c printk("SnapGear: EraseConfig init\n"); printk 45 arch/sh/boards/board-secureedge5410.c printk("SnapGear: failed to register IRQ%d for Reset witch\n", printk 48 arch/sh/boards/board-secureedge5410.c printk("SnapGear: registered EraseConfig switch on IRQ%d\n", printk 64 arch/sh/boards/board-secureedge5410.c printk("Setup SnapGear IRQ/IPR ...\n"); printk 129 arch/sh/boards/board-sh2007.c printk(KERN_INFO "SH-2007 Setup..."); printk 136 arch/sh/boards/board-sh2007.c printk(KERN_INFO " done.\n"); printk 581 arch/sh/boards/board-sh7757lcr.c printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n"); printk 324 arch/sh/boards/board-sh7785lcr.c printk(KERN_ERR "%s: ioremap error.\n", __func__); printk 339 arch/sh/boards/board-sh7785lcr.c printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); printk 346 arch/sh/boards/board-sh7785lcr.c printk(KERN_ERR "%s: ioremap error.\n", __func__); printk 202 arch/sh/boards/board-urquell.c printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n"); printk 33 arch/sh/boards/mach-cayman/irq.c printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); printk 39 arch/sh/boards/mach-cayman/irq.c printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); printk 142 arch/sh/boards/mach-cayman/irq.c printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); printk 115 arch/sh/boards/mach-cayman/setup.c printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); printk 1050 arch/sh/boards/mach-ecovec24/setup.c printk(KERN_ERR "error %d\n", ret); printk 1153 arch/sh/boards/mach-ecovec24/setup.c printk(KERN_INFO "USB1 function is selected\n"); printk 1156 arch/sh/boards/mach-ecovec24/setup.c printk(KERN_INFO "USB1 host is selected\n"); printk 65 arch/sh/boards/mach-highlander/irq-r7780mp.c printk(KERN_INFO "Using r7780mp interrupt controller.\n"); printk 58 arch/sh/boards/mach-highlander/irq-r7780rp.c printk(KERN_INFO "Using r7780rp interrupt controller.\n"); printk 69 arch/sh/boards/mach-highlander/irq-r7785rp.c printk(KERN_INFO "Using r7785rp interrupt controller.\n"); printk 354 arch/sh/boards/mach-highlander/setup.c printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", printk 359 arch/sh/boards/mach-highlander/setup.c printk(KERN_INFO "Board version: %d (revision %d), " printk 89 arch/sh/boards/mach-hp6xx/hp6xx_apm.c printk(KERN_ERR MODNAME ": IRQ %d request failed\n", printk 134 arch/sh/boards/mach-landisk/gio.c printk(KERN_INFO "gio: driver initialized\n"); printk 139 arch/sh/boards/mach-landisk/gio.c printk(KERN_ERR printk 149 arch/sh/boards/mach-landisk/gio.c printk(KERN_ERR printk 63 arch/sh/boards/mach-landisk/setup.c printk("allocate_cf_area : can't open CF I/O window!\n"); printk 88 arch/sh/boards/mach-landisk/setup.c printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); printk 58 arch/sh/boards/mach-lboxre2/setup.c printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); printk 78 arch/sh/boards/mach-microdev/fdc37c93xapm.c printk("SMSC FDC37C93xAPM SuperIO device detected\n"); printk 117 arch/sh/boards/mach-microdev/io.c printk("Warning: unexpected port in %s( offset = 0x%lx )\n", printk 143 arch/sh/boards/mach-microdev/irq.c printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n"); printk 144 arch/sh/boards/mach-microdev/irq.c printk("FPGA_INTENB = 0x%08x\n", *intenb); printk 145 arch/sh/boards/mach-microdev/irq.c printk("FPGA_INTDSB = 0x%08x\n", *intdsb); printk 146 arch/sh/boards/mach-microdev/irq.c printk("FPGA_INTSRC = 0x%08x\n", *intsrc); printk 147 arch/sh/boards/mach-microdev/irq.c printk("FPGA_INTREQ = 0x%08x\n", *intreq); printk 148 arch/sh/boards/mach-microdev/irq.c printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria); printk 149 arch/sh/boards/mach-microdev/irq.c printk("-------------------------------------------------------------------------------\n"); printk 136 arch/sh/boards/mach-r2d/irq.c printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n"); printk 144 arch/sh/boards/mach-r2d/irq.c printk(KERN_INFO "Using R2D-1 interrupt controller.\n"); printk 150 arch/sh/boards/mach-r2d/irq.c printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n", printk 273 arch/sh/boards/mach-r2d/setup.c printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); printk 275 arch/sh/boards/mach-r2d/setup.c printk(KERN_INFO "FPGA version:%d (revision:%d)\n", printk 35 arch/sh/boards/mach-sdk7780/irq.c printk(KERN_INFO "Using SDK7780 interrupt controller.\n"); printk 77 arch/sh/boards/mach-sdk7780/setup.c printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n"); printk 78 arch/sh/boards/mach-sdk7780/setup.c printk(KERN_INFO "Board version: %d (revision %d), " printk 43 arch/sh/boards/mach-sdk7786/nmi.c printk("Set NMI mode to %d\n", nmi_mode); printk 53 arch/sh/boards/mach-se/7343/irq.c printk("Failed to get IRQ domain\n"); printk 61 arch/sh/boards/mach-se/7343/irq.c printk("Failed to allocate IRQ %d\n", i); printk 172 arch/sh/boards/mach-se/7343/setup.c printk(KERN_INFO "MS7343CP01 Setup...done\n"); printk 52 arch/sh/boards/mach-se/7722/irq.c printk("Failed to get IRQ domain\n"); printk 60 arch/sh/boards/mach-se/7722/irq.c printk("Failed to allocate IRQ %d\n", i); printk 103 arch/sh/boards/mach-se/7722/irq.c printk("Failed to remap IRQ01 regs\n"); printk 622 arch/sh/boards/mach-se/7724/setup.c printk(KERN_ERR "ms7724se can not access to eeprom\n"); printk 84 arch/sh/boards/mach-se/7780/setup.c printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n"); printk 60 arch/sh/boards/mach-sh03/rtc.c printk(KERN_ERR printk 62 arch/sh/boards/mach-sh03/rtc.c printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n", printk 80 arch/sh/boards/mach-sh03/setup.c printk("allocate_cf_area : can't open CF I/O window!\n"); printk 164 arch/sh/boards/mach-sh7763rdp/setup.c printk(KERN_INFO "RTE Standard Configuration\n"); printk 166 arch/sh/boards/mach-sh7763rdp/setup.c printk(KERN_INFO "RTA Standard Configuration\n"); printk 79 arch/sh/cchips/hd6446x/hd64461.c printk(KERN_INFO printk 104 arch/sh/cchips/hd6446x/hd64461.c printk(KERN_INFO "HD64461: enabling PCMCIA devices\n"); printk 345 arch/sh/drivers/dma/dma-api.c printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n", printk 410 arch/sh/drivers/dma/dma-api.c printk(KERN_NOTICE "DMA: Registering DMA API.\n"); printk 98 arch/sh/drivers/dma/dma-g2.c printk("g2dma: unaligned source 0x%lx\n", chan->sar); printk 103 arch/sh/drivers/dma/dma-g2.c printk("g2dma: unaligned dest 0x%lx\n", chan->dar); printk 24 arch/sh/drivers/dma/dma-pvr2.c printk(KERN_WARNING "DMA: SH DMAC did not complete transfer " printk 273 arch/sh/drivers/dma/dma-sh.c printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n"); printk 337 arch/sh/drivers/dma/dma-sh.c printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); printk 165 arch/sh/drivers/dma/dmabrg.c printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n"); printk 149 arch/sh/drivers/heartbeat.c printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); printk 57 arch/sh/drivers/pci/common.c printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); printk 76 arch/sh/drivers/pci/common.c printk(KERN_DEBUG printk 93 arch/sh/drivers/pci/common.c printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n"); printk 102 arch/sh/drivers/pci/common.c printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n"); printk 128 arch/sh/drivers/pci/common.c printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr); printk 133 arch/sh/drivers/pci/common.c printk(KERN_DEBUG "PCI: target abort: "); printk 137 arch/sh/drivers/pci/common.c printk("\n"); printk 143 arch/sh/drivers/pci/common.c printk(KERN_DEBUG "PCI: parity error detected: "); printk 146 arch/sh/drivers/pci/common.c printk("\n"); printk 34 arch/sh/drivers/pci/fixups-dreamcast.c printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev)); printk 69 arch/sh/drivers/pci/fixups-dreamcast.c printk("PCI: Failed resource fixup\n"); printk 32 arch/sh/drivers/pci/fixups-landisk.c printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n", printk 20 arch/sh/drivers/pci/fixups-se7751.c printk("PCI: Bad IRQ mapping request for slot %d\n", slot); printk 110 arch/sh/drivers/pci/fixups-se7751.c printk("SH7751 PCI: Finished initialization of the PCI controller\n"); printk 18 arch/sh/drivers/pci/fixups-sh03.c printk(KERN_ERR "PCI: Bad IRQ mapping request " printk 33 arch/sh/drivers/pci/fixups-snapgear.c printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n", printk 32 arch/sh/drivers/pci/fixups-titan.c printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", printk 63 arch/sh/drivers/pci/pci-sh5.c printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); printk 64 arch/sh/drivers/pci/pci-sh5.c printk("PCI INT -> 0x%x\n", pci_int & 0xffff); printk 65 arch/sh/drivers/pci/pci-sh5.c printk("PCI AIR -> 0x%x\n", pci_air); printk 66 arch/sh/drivers/pci/pci-sh5.c printk("PCI CIR -> 0x%x\n", pci_cir); printk 72 arch/sh/drivers/pci/pci-sh5.c printk("PCI ARB INTERRUPT!\n"); printk 73 arch/sh/drivers/pci/pci-sh5.c printk("PCI AINT -> 0x%x\n", pci_aint); printk 74 arch/sh/drivers/pci/pci-sh5.c printk("PCI AIR -> 0x%x\n", pci_air); printk 75 arch/sh/drivers/pci/pci-sh5.c printk("PCI CIR -> 0x%x\n", pci_cir); printk 84 arch/sh/drivers/pci/pci-sh5.c printk("SERR IRQ\n"); printk 108 arch/sh/drivers/pci/pci-sh5.c printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); printk 114 arch/sh/drivers/pci/pci-sh5.c printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); printk 186 arch/sh/drivers/pci/pci-sh5.c printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n", printk 27 arch/sh/drivers/pci/pci-sh7751.c printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n", printk 36 arch/sh/drivers/pci/pci-sh7751.c printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n", printk 81 arch/sh/drivers/pci/pci-sh7751.c printk(KERN_NOTICE "PCI: Starting initialization.\n"); printk 122 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", printk 135 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", printk 149 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_DEBUG "PCI: system error received: "); printk 151 arch/sh/drivers/pci/pci-sh7780.c printk("\n"); printk 182 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n"); printk 253 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_NOTICE "PCI: Starting initialization.\n"); printk 273 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); printk 284 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_ERR "PCI: Found an unsupported Renesas host " printk 289 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_NOTICE "PCI: Found a Renesas %s host " printk 398 arch/sh/drivers/pci/pci-sh7780.c printk(KERN_NOTICE "PCI: Running at %dMHz.\n", printk 123 arch/sh/drivers/pci/pci.c printk(KERN_WARNING printk 148 arch/sh/drivers/pci/pci.c printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n"); printk 216 arch/sh/drivers/pci/pci.c printk("(%02x:%02x: %04X) ", current_bus, printk 252 arch/sh/drivers/pci/pci.c printk("(%s: %04X) ", pci_name(dev), status); printk 435 arch/sh/drivers/pci/pcie-sh7786.c printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n", printk 438 arch/sh/drivers/pci/pcie-sh7786.c printk(KERN_NOTICE "PCI: PCIe#%d link down\n", printk 551 arch/sh/drivers/pci/pcie-sh7786.c printk(KERN_NOTICE "PCI: Starting initialization.\n"); printk 592 arch/sh/drivers/pci/pcie-sh7786.c printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports); printk 123 arch/sh/drivers/push-switch.c printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); printk 69 arch/sh/include/asm/bugs.h printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); printk 30 arch/sh/include/asm/pgtable-3level.h printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e)) printk 429 arch/sh/include/asm/pgtable_32.h printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ printk 432 arch/sh/include/asm/pgtable_32.h printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) printk 435 arch/sh/include/asm/pgtable_32.h printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) printk 437 arch/sh/include/asm/pgtable_32.h printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 23 arch/sh/include/asm/pgtable_64.h printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) printk 25 arch/sh/include/asm/pgtable_64.h printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 59 arch/sh/kernel/cpu/fpu.c printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); printk 221 arch/sh/kernel/cpu/init.c printk("FPU Disabled\n"); printk 268 arch/sh/kernel/cpu/init.c printk("DSP Disabled\n"); printk 85 arch/sh/kernel/cpu/irq/intc-sh5.c printk("Trying to use straight IRL0-3 with an encoding platform.\n"); printk 162 arch/sh/kernel/cpu/irq/intc-sh5.c printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); printk 68 arch/sh/kernel/cpu/irq/ipr.c printk(KERN_INFO "can not get irq_desc for %d\n", printk 216 arch/sh/kernel/cpu/sh4/sq.c printk("%s: bad store queue address 0x%08lx\n", printk 233 arch/sh/kernel/cpu/sh4/sq.c printk(KERN_ERR "%s: bad address 0x%08lx\n", printk 376 arch/sh/kernel/cpu/sh4/sq.c printk(KERN_NOTICE "sq: Registering store queue API.\n"); printk 450 arch/sh/kernel/cpu/sh4a/setup-sh7786.c printk(KERN_INFO "sh7786 usb setup done\n"); printk 66 arch/sh/kernel/cpu/sh4a/smp-shx3.c printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); printk 149 arch/sh/kernel/cpu/sh5/unwind.c printk(KERN_NOTICE "%s: Invalid dest reg %d " printk 240 arch/sh/kernel/cpu/sh5/unwind.c printk("SYSCALL\n"); printk 246 arch/sh/kernel/cpu/sh5/unwind.c printk("SYSCALL (PREEMPTED)\n"); printk 254 arch/sh/kernel/cpu/sh5/unwind.c printk("EXCEPTION\n"); printk 260 arch/sh/kernel/cpu/sh5/unwind.c printk("IRQ\n"); printk 286 arch/sh/kernel/cpu/sh5/unwind.c printk("Unable to lookup previous stack frame\n"); printk 292 arch/sh/kernel/cpu/sh5/unwind.c printk("\n"); printk 379 arch/sh/kernel/disassemble.c printk("%-8s ", op->name); printk 384 arch/sh/kernel/disassemble.c printk(", "); printk 387 arch/sh/kernel/disassemble.c printk("#%d", (char)(imm)); printk 390 arch/sh/kernel/disassemble.c printk("r0"); printk 393 arch/sh/kernel/disassemble.c printk("r%d", rn); printk 396 arch/sh/kernel/disassemble.c printk("@r%d+", rn); printk 399 arch/sh/kernel/disassemble.c printk("@-r%d", rn); printk 402 arch/sh/kernel/disassemble.c printk("@r%d", rn); printk 405 arch/sh/kernel/disassemble.c printk("@(%d,r%d)", imm, rn); printk 408 arch/sh/kernel/disassemble.c printk("r%d", rm); printk 411 arch/sh/kernel/disassemble.c printk("@r%d+", rm); printk 414 arch/sh/kernel/disassemble.c printk("@-r%d", rm); printk 417 arch/sh/kernel/disassemble.c printk("@r%d", rm); printk 420 arch/sh/kernel/disassemble.c printk("@(%d,r%d)", imm, rm); printk 423 arch/sh/kernel/disassemble.c printk("r%d_bank", rb); printk 428 arch/sh/kernel/disassemble.c printk("%08x <%pS>", disp_pc_addr, printk 432 arch/sh/kernel/disassemble.c printk("@(r0,r%d)", rn); printk 435 arch/sh/kernel/disassemble.c printk("@(r0,r%d)", rm); printk 438 arch/sh/kernel/disassemble.c printk("@(%d,gbr)",imm); printk 441 arch/sh/kernel/disassemble.c printk("@(r0,gbr)"); printk 445 arch/sh/kernel/disassemble.c printk("%08x", imm + memaddr); printk 448 arch/sh/kernel/disassemble.c printk("sr"); printk 451 arch/sh/kernel/disassemble.c printk("gbr"); printk 454 arch/sh/kernel/disassemble.c printk("vbr"); printk 457 arch/sh/kernel/disassemble.c printk("ssr"); printk 460 arch/sh/kernel/disassemble.c printk("spc"); printk 463 arch/sh/kernel/disassemble.c printk("mach"); printk 466 arch/sh/kernel/disassemble.c printk("macl"); printk 469 arch/sh/kernel/disassemble.c printk("pr"); printk 472 arch/sh/kernel/disassemble.c printk("sgr"); printk 475 arch/sh/kernel/disassemble.c printk("dbr"); printk 479 arch/sh/kernel/disassemble.c printk("fr%d", rn); printk 482 arch/sh/kernel/disassemble.c printk("fr%d", rm); printk 486 arch/sh/kernel/disassemble.c printk("xd%d", rn & ~1); printk 491 arch/sh/kernel/disassemble.c printk("dr%d", rn); printk 495 arch/sh/kernel/disassemble.c printk("xd%d", rm & ~1); printk 500 arch/sh/kernel/disassemble.c printk("dr%d", rm); printk 504 arch/sh/kernel/disassemble.c printk("fpscr"); printk 508 arch/sh/kernel/disassemble.c printk("fpul"); printk 511 arch/sh/kernel/disassemble.c printk("fr0"); printk 514 arch/sh/kernel/disassemble.c printk("fv%d", rn*4); printk 517 arch/sh/kernel/disassemble.c printk("fv%d", rm*4); printk 520 arch/sh/kernel/disassemble.c printk("xmtrx"); printk 535 arch/sh/kernel/disassemble.c printk(" ! %08x <%pS>", val, (void *)val); printk 544 arch/sh/kernel/disassemble.c printk(".word 0x%x%x%x%x", nibs[0], nibs[1], nibs[2], nibs[3]); printk 555 arch/sh/kernel/disassemble.c printk("Code:\n"); printk 561 arch/sh/kernel/disassemble.c printk(" (Bad address in pc)\n"); printk 565 arch/sh/kernel/disassemble.c printk("%s%08lx: ", (i ? " ": "->"), (unsigned long)(pc + i)); printk 567 arch/sh/kernel/disassemble.c printk("\n"); printk 570 arch/sh/kernel/disassemble.c printk("\n"); printk 24 arch/sh/kernel/dumpstack.c printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); printk 27 arch/sh/kernel/dumpstack.c printk("%04lx: ", p & 0xffff); printk 33 arch/sh/kernel/dumpstack.c printk(" "); printk 36 arch/sh/kernel/dumpstack.c printk("\n"); printk 39 arch/sh/kernel/dumpstack.c printk("%08x ", val); printk 42 arch/sh/kernel/dumpstack.c printk("\n"); printk 48 arch/sh/kernel/dumpstack.c printk(" [<%p>] %s%pS\n", (void *) address, printk 111 arch/sh/kernel/dumpstack.c printk("%s <%s> ", (char *)data, name); printk 120 arch/sh/kernel/dumpstack.c printk("%s", (char *)data); printk 135 arch/sh/kernel/dumpstack.c printk("\nCall trace:\n"); printk 139 arch/sh/kernel/dumpstack.c printk("\n"); printk 69 arch/sh/kernel/dwarf.c printk(KERN_WARNING "Unable to allocate a DWARF register\n"); printk 290 arch/sh/kernel/dwarf.c printk(KERN_WARNING "Unknown DWARF extension\n"); printk 625 arch/sh/kernel/dwarf.c printk(KERN_ERR "Unable to allocate a dwarf frame\n"); printk 1079 arch/sh/kernel/dwarf.c printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n", printk 1114 arch/sh/kernel/dwarf.c printk(KERN_WARNING "%s: failed to parse DWARF info\n", printk 1202 arch/sh/kernel/dwarf.c printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err); printk 34 arch/sh/kernel/irq.c printk("unexpected IRQ trap at vector %02x\n", irq); printk 142 arch/sh/kernel/irq.c printk("CPU %u irqstacks, hard=%p soft=%p\n", printk 91 arch/sh/kernel/kprobes.c printk("Warning: removing kprobe from delay slot: 0x%.8x\n", printk 55 arch/sh/kernel/machine_kexec.c printk("kexec information\n"); printk 57 arch/sh/kernel/machine_kexec.c printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n", printk 64 arch/sh/kernel/machine_kexec.c printk(" start : 0x%08x\n\n", (unsigned int)image->start); printk 67 arch/sh/kernel/machvec.c printk("Available vectors:\n\n\t'%s', ", sh_mv.mv_name); printk 69 arch/sh/kernel/machvec.c printk("'%s', ", mvp->mv_name); printk 70 arch/sh/kernel/machvec.c printk("\n\n"); printk 107 arch/sh/kernel/machvec.c printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type()); printk 91 arch/sh/kernel/module.c printk(KERN_ERR "module %s: Unknown relocation: %u\n", printk 67 arch/sh/kernel/nmi_debug.c printk(KERN_WARNING "NMI: Unrecognized action `%s'\n", printk 33 arch/sh/kernel/process_32.c printk("\n"); printk 36 arch/sh/kernel/process_32.c printk("PC is at %pS\n", (void *)instruction_pointer(regs)); printk 37 arch/sh/kernel/process_32.c printk("PR is at %pS\n", (void *)regs->pr); printk 39 arch/sh/kernel/process_32.c printk("PC : %08lx SP : %08lx SR : %08lx ", printk 42 arch/sh/kernel/process_32.c printk("TEA : %08x\n", __raw_readl(MMU_TEA)); printk 44 arch/sh/kernel/process_32.c printk("\n"); printk 47 arch/sh/kernel/process_32.c printk("R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", printk 50 arch/sh/kernel/process_32.c printk("R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", printk 53 arch/sh/kernel/process_32.c printk("R8 : %08lx R9 : %08lx R10 : %08lx R11 : %08lx\n", printk 56 arch/sh/kernel/process_32.c printk("R12 : %08lx R13 : %08lx R14 : %08lx\n", printk 59 arch/sh/kernel/process_32.c printk("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n", printk 42 arch/sh/kernel/process_64.c printk("\n"); printk 51 arch/sh/kernel/process_64.c printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n", printk 64 arch/sh/kernel/process_64.c printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n", printk 73 arch/sh/kernel/process_64.c printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n", printk 82 arch/sh/kernel/process_64.c printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n", printk 91 arch/sh/kernel/process_64.c printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n", printk 100 arch/sh/kernel/process_64.c printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n", printk 109 arch/sh/kernel/process_64.c printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n", printk 118 arch/sh/kernel/process_64.c printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n", printk 127 arch/sh/kernel/process_64.c printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n", printk 136 arch/sh/kernel/process_64.c printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n", printk 145 arch/sh/kernel/process_64.c printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n", printk 154 arch/sh/kernel/process_64.c printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n", printk 163 arch/sh/kernel/process_64.c printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n", printk 172 arch/sh/kernel/process_64.c printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n", printk 181 arch/sh/kernel/process_64.c printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n", printk 190 arch/sh/kernel/process_64.c printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n", printk 199 arch/sh/kernel/process_64.c printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n", printk 208 arch/sh/kernel/process_64.c printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n", printk 217 arch/sh/kernel/process_64.c printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n", printk 226 arch/sh/kernel/process_64.c printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n", printk 235 arch/sh/kernel/process_64.c printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n", printk 244 arch/sh/kernel/process_64.c printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n", printk 253 arch/sh/kernel/process_64.c printk("R62 : %08Lx%08Lx T0 : %08Lx%08Lx T1 : %08Lx%08Lx\n", printk 262 arch/sh/kernel/process_64.c printk("T2 : %08Lx%08Lx T3 : %08Lx%08Lx T4 : %08Lx%08Lx\n", printk 271 arch/sh/kernel/process_64.c printk("T5 : %08Lx%08Lx T6 : %08Lx%08Lx T7 : %08Lx%08Lx\n", printk 498 arch/sh/kernel/ptrace_64.c printk("DBRMODE set to 0 to permit native debugging\n"); printk 188 arch/sh/kernel/setup.c printk(KERN_INFO "Calibrating delay loop (skipped)... " printk 279 arch/sh/kernel/setup.c printk(KERN_NOTICE "Boot params:\n" printk 81 arch/sh/kernel/sh_bios.c printk(KERN_NOTICE "Setting GDB trap vector to %p\n", printk 84 arch/sh/kernel/sh_bios.c printk(KERN_NOTICE "SH-BIOS not detected\n"); printk 42 arch/sh/kernel/smp.c printk(KERN_WARNING "Overriding previously set SMP ops\n"); printk 255 arch/sh/kernel/smp.c printk(KERN_INFO "SMP: Total of %d processors activated " printk 319 arch/sh/kernel/smp.c printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n", printk 61 arch/sh/kernel/topology.c printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n", printk 33 arch/sh/kernel/traps.c printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); printk 37 arch/sh/kernel/traps.c printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm, printk 188 arch/sh/kernel/traps.c printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n"); printk 532 arch/sh/kernel/traps_32.c printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned " printk 205 arch/sh/kernel/traps_64.c printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", printk 229 arch/sh/kernel/traps_64.c printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", printk 272 arch/sh/kernel/traps_64.c printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", printk 298 arch/sh/kernel/traps_64.c printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", printk 370 arch/sh/kernel/traps_64.c printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n", printk 437 arch/sh/kernel/traps_64.c printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n", printk 768 arch/sh/kernel/traps_64.c printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId); printk 804 arch/sh/kernel/traps_64.c printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n", printk 277 arch/sh/math-emu/math.c { printk( #i " not yet done.\n"); return 0; } printk 380 arch/sh/mm/cache-sh4.c printk("PVR=%08x CVR=%08x PRR=%08x\n", printk 259 arch/sh/mm/cache.c printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n", printk 263 arch/sh/mm/cache.c printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", printk 267 arch/sh/mm/cache.c printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n", printk 271 arch/sh/mm/cache.c printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", printk 280 arch/sh/mm/cache.c printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n", printk 284 arch/sh/mm/cache.c printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", printk 50 arch/sh/mm/fault.c printk(KERN_ALERT "pgd = %p\n", pgd); printk 52 arch/sh/mm/fault.c printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr, printk 64 arch/sh/mm/fault.c printk("(bad)"); printk 70 arch/sh/mm/fault.c printk(", *pud=%0*Lx", (u32)(sizeof(*pud) * 2), printk 77 arch/sh/mm/fault.c printk("(bad)"); printk 83 arch/sh/mm/fault.c printk(", *pmd=%0*Lx", (u32)(sizeof(*pmd) * 2), printk 90 arch/sh/mm/fault.c printk("(bad)"); printk 99 arch/sh/mm/fault.c printk(", *pte=%0*Lx", (u32)(sizeof(*pte) * 2), printk 103 arch/sh/mm/fault.c printk("\n"); printk 191 arch/sh/mm/fault.c printk(KERN_ALERT "BUG: unable to handle kernel "); printk 193 arch/sh/mm/fault.c printk(KERN_CONT "NULL pointer dereference"); printk 195 arch/sh/mm/fault.c printk(KERN_CONT "paging request"); printk 197 arch/sh/mm/fault.c printk(KERN_CONT " at %08lx\n", address); printk 198 arch/sh/mm/fault.c printk(KERN_ALERT "PC:"); printk 418 arch/sh/mm/init.c printk("%s: Failed, __add_pages() == %d\n", __func__, ret); printk 131 arch/sh/mm/ioremap.c printk(KERN_ERR "%s: bad address %p\n", __func__, addr); printk 119 arch/sparc/include/asm/floppy_32.h printk("floppy: Asked to read unknown port %d\n", port); printk 136 arch/sparc/include/asm/floppy_32.h printk("floppy: Asked to write to unknown port %d\n", port); printk 159 arch/sparc/include/asm/floppy_32.h printk("floppy: Asked to read unknown port %d\n", port); printk 184 arch/sparc/include/asm/floppy_32.h printk("floppy: Asked to write to unknown port %d\n", port); printk 238 arch/sparc/include/asm/floppy_32.h printk("Unknown dma mode %d\n", mode); printk 105 arch/sparc/include/asm/floppy_64.h printk("floppy: Asked to read unknown port %lx\n", port); printk 123 arch/sparc/include/asm/floppy_64.h printk("floppy: Asked to write to unknown port %lx\n", port); printk 177 arch/sparc/include/asm/floppy_64.h printk("Unknown dma mode %d\n", mode); printk 60 arch/sparc/include/asm/parport.h printk(KERN_WARNING "Trying to free DMA%d\n", dmanr); printk 64 arch/sparc/include/asm/parport.h printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr); printk 473 arch/sparc/include/asm/vio.h printk(KERN_INFO "vio: ID[%lu] " f, \ printk 150 arch/sparc/kernel/apc.c printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME); printk 156 arch/sparc/kernel/apc.c printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME); printk 165 arch/sparc/kernel/apc.c printk(KERN_INFO "%s: power management initialized%s\n", printk 139 arch/sparc/kernel/auxio_32.c printk(KERN_INFO "Power off control detected.\n"); printk 118 arch/sparc/kernel/auxio_64.c printk("auxio: Unknown parent bus type [%pOFn]\n", printk 126 arch/sparc/kernel/auxio_64.c printk(KERN_INFO "AUXIO: Found device at %pOF\n", dp); printk 70 arch/sparc/kernel/central.c printk(KERN_ERR "clock_board: Cannot allocate struct clock_board\n"); printk 78 arch/sparc/kernel/central.c printk(KERN_ERR "clock_board: Cannot map clock_freq_regs\n"); printk 86 arch/sparc/kernel/central.c printk(KERN_ERR "clock_board: Cannot map clock_regs\n"); printk 95 arch/sparc/kernel/central.c printk(KERN_ERR "clock_board: Cannot map clock_ver_reg\n"); printk 115 arch/sparc/kernel/central.c printk(KERN_ERR "clock_board: Could not register LEDS " printk 120 arch/sparc/kernel/central.c printk(KERN_INFO "clock_board: Detected %d slot Enterprise system.\n", printk 167 arch/sparc/kernel/central.c printk(KERN_ERR "fhc: Cannot allocate struct fhc\n"); printk 178 arch/sparc/kernel/central.c printk(KERN_ERR "fhc: Cannot map pregs\n"); printk 188 arch/sparc/kernel/central.c printk(KERN_ERR "fhc: No board# property\n"); printk 209 arch/sparc/kernel/central.c printk(KERN_ERR "fhc: Could not register LEDS " printk 227 arch/sparc/kernel/central.c printk(KERN_INFO "fhc: Board #%d, Version[%x] PartID[%x] Manuf[%x] %s\n", printk 408 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot find /memory node.\n"); printk 413 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot get reg property of /memory node.\n"); printk 421 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot allocate struct jbusmc.\n"); printk 430 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot find portid.\n"); printk 438 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot get memory control register 1.\n"); printk 447 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot map jbusmc regs.\n"); printk 454 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Cannot get memory layout property.\n"); printk 458 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Unexpected memory-layout size %d\n", printk 468 arch/sparc/kernel/chmc.c printk(KERN_INFO PFX "UltraSPARC-IIIi memory controller at %pOF\n", printk 714 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Unexpected memory-layout property " printk 722 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Could not allocate struct chmc.\n"); printk 735 arch/sparc/kernel/chmc.c printk(KERN_ERR PFX "Could not map registers.\n"); printk 751 arch/sparc/kernel/chmc.c printk(KERN_INFO PFX "UltraSPARC-III memory controller at %pOF [%s]\n", printk 308 arch/sparc/kernel/cpu.c printk(KERN_ERR "CPU: Unknown chip, impl[0x%x] vers[0x%x]\n", printk 314 arch/sparc/kernel/cpu.c printk(KERN_ERR "FPU: Unknown chip, impl[0x%x] vers[0x%x]\n", printk 529 arch/sparc/kernel/cpu.c printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n", printk 118 arch/sparc/kernel/devices.c printk(KERN_NOTICE "Booting Linux...\n"); printk 294 arch/sparc/kernel/ds.c printk(KERN_INFO "ds-%llu: Machine description update.\n", dp->id); printk 333 arch/sparc/kernel/ds.c printk(KERN_ALERT "ds-%llu: Shutdown request from " printk 373 arch/sparc/kernel/ds.c printk(KERN_ALERT "ds-%llu: Panic request from " printk 556 arch/sparc/kernel/ds.c printk(KERN_INFO "ds-%llu: Starting cpu %d...\n", printk 572 arch/sparc/kernel/ds.c printk(KERN_INFO "ds-%llu: CPU startup failed err=%d\n", printk 612 arch/sparc/kernel/ds.c printk(KERN_INFO "ds-%llu: Shutting down cpu %d...\n", printk 690 arch/sparc/kernel/ds.c printk(KERN_INFO "ds-%llu: PRI REQ [%llx:%llx], len=%d\n", printk 787 arch/sparc/kernel/ds.c printk(KERN_ERR PFX printk 832 arch/sparc/kernel/ds.c printk(KERN_ERR "ds-%llu: var-config [%s:%s] " printk 837 arch/sparc/kernel/ds.c printk(KERN_ERR PFX "var-config not registered so " printk 880 arch/sparc/kernel/ds.c printk(KERN_ERR "ds-%llu: ds_conn_reset() from %ps\n", printk 942 arch/sparc/kernel/ds.c printk(KERN_ERR "ds-%llu: REG ACK for unknown " printk 946 arch/sparc/kernel/ds.c printk(KERN_INFO "ds-%llu: Registered %s service.\n", printk 954 arch/sparc/kernel/ds.c printk(KERN_ERR "ds-%llu: REG NACK for " printk 1012 arch/sparc/kernel/ds.c printk(KERN_ERR "ds-%llu: Data for unknown " printk 1115 arch/sparc/kernel/ds.c printk(KERN_WARNING "ds-%llu: Unexpected LDC event %d\n", printk 1173 arch/sparc/kernel/ds.c printk(KERN_INFO "%s", version); printk 82 arch/sparc/kernel/ebus.c printk(KERN_CRIT "ebus_dma(%s): DMA error!\n", p->name); printk 50 arch/sparc/kernel/idprom.c printk(KERN_WARNING "TYPE: %s\n", printk 53 arch/sparc/kernel/idprom.c printk(KERN_WARNING "TYPE: %s\n", sysname); printk 98 arch/sparc/kernel/idprom.c printk(KERN_WARNING "Ethernet address: %pM\n", idprom->id_ethaddr); printk 124 arch/sparc/kernel/iommu.c printk(KERN_ERR "IOMMU: Error, gfp(dummy_page) failed.\n"); printk 135 arch/sparc/kernel/iommu.c printk(KERN_ERR "IOMMU: Error, gfp(tsb) failed.\n"); printk 178 arch/sparc/kernel/iommu.c printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); printk 347 arch/sparc/kernel/iommu.c printk(KERN_WARNING "strbuf_flush: ctx flush " printk 381 arch/sparc/kernel/iommu.c printk(KERN_WARNING "strbuf_flush: flushflag timeout " printk 497 arch/sparc/kernel/iommu.c printk(KERN_INFO "iommu_alloc failed, iommu %p paddr %lx" printk 146 arch/sparc/kernel/ioport.c printk("free_io/iounmap: cannot free %lx\n", vaddr); printk 194 arch/sparc/kernel/ioport.c printk("ioremap: done with statics, switching to malloc\n"); printk 259 arch/sparc/kernel/ioport.c printk("%s: cannot occupy 0x%zx", __func__, len); printk 274 arch/sparc/kernel/ioport.c printk("%s: cannot free %p\n", __func__, cpu_addr); printk 279 arch/sparc/kernel/ioport.c printk("%s: unaligned va %p\n", __func__, cpu_addr); printk 285 arch/sparc/kernel/ioport.c printk("%s: region 0x%lx asked 0x%zx\n", printk 299 arch/sparc/kernel/ioport.c printk("sbus_set_sbus64: unsupported\n"); printk 330 arch/sparc/kernel/ioport.c printk("%s: no %zd pages\n", __func__, size >> PAGE_SHIFT); printk 144 arch/sparc/kernel/irq_32.c printk(KERN_ERR "IRQ: Out of virtual IRQs.\n"); printk 460 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): " printk 464 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_intr_setstate(%x): " printk 468 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_intr_setenabled(%x): err(%d)\n", printk 481 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): " printk 494 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_intr_setenabled(%x): " printk 505 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_intr_setstate(%x): " printk 520 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): " printk 526 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx," printk 532 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx," printk 549 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): " printk 566 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx," printk 580 arch/sparc/kernel/irq_64.c printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx," printk 178 arch/sparc/kernel/ldc.c printk(KERN_INFO PFX "ID[%lu] " f, lp->id, ## a); \ printk 524 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_abort: " printk 533 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_abort: " printk 539 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_abort: " printk 551 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_abort: " printk 986 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "Alloc of %s queue failed with " printk 1058 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "Alloc of arena map failed, sz=%lu\n", sz); printk 1072 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "Alloc of MTE table failed, " printk 2272 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_copy: ID[%lu] Bad copy_dir[%d]\n", printk 2279 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_copy: ID[%lu] Unaligned buffer " printk 2287 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_copy: ID[%lu] Link down hs_state[%x] " printk 2321 arch/sparc/kernel/ldc.c printk(KERN_ERR PFX "ldc_copy: ID[%lu] " printk 2410 arch/sparc/kernel/ldc.c printk(KERN_INFO PFX "Could not register LDOM hvapi.\n"); printk 2414 arch/sparc/kernel/ldc.c printk(KERN_INFO "%s", version); printk 2417 arch/sparc/kernel/ldc.c printk(KERN_INFO PFX "Domaining disabled.\n"); printk 128 arch/sparc/kernel/led.c printk(KERN_INFO printk 76 arch/sparc/kernel/leon_kernel.c printk(KERN_ERR "LEON EXT IRQ NUMBER BAD: %d\n", eirq); printk 99 arch/sparc/kernel/leon_kernel.c printk(KERN_ERR printk 469 arch/sparc/kernel/leon_kernel.c printk(KERN_ERR "No Timer/irqctrl found\n"); printk 267 arch/sparc/kernel/leon_pci_grpci1.c printk(KERN_INFO printk 288 arch/sparc/kernel/leon_pci_grpci1.c printk(KERN_INFO printk 584 arch/sparc/kernel/leon_pci_grpci1.c printk(KERN_INFO printk 646 arch/sparc/kernel/leon_pci_grpci1.c printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n", printk 404 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x " printk 425 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d " printk 574 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO "GRPCI2: Resetting PCI bus\n"); printk 636 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n", printk 651 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: Jump IRQ happened\n"); printk 667 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: Parity Error\n"); printk 670 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: Target Abort\n"); printk 673 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: Master Abort\n"); printk 676 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: System Error\n"); printk 693 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n"); printk 698 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n"); printk 707 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: ioremap failed\n"); printk 717 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO "GRPCI2: not in host system slot\n"); printk 731 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq); printk 769 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_INFO printk 834 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n"); printk 858 arch/sparc/kernel/leon_pci_grpci2.c printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err); printk 85 arch/sparc/kernel/leon_pmc.c printk(KERN_INFO "leon: power management initialized\n"); printk 116 arch/sparc/kernel/leon_smp.c printk(KERN_INFO "Note: SMP with snooping only works on 4k cache, found %dk(0x%x) on cpu %d, disabling caches\n", printk 124 arch/sparc/kernel/leon_smp.c printk(KERN_INFO "Note: You have to enable snooping in the vhdl model cpu %d, disabling caches\n", printk 168 arch/sparc/kernel/leon_smp.c printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x\n", (unsigned int)me, printk 199 arch/sparc/kernel/leon_smp.c printk(KERN_INFO "Starting CPU %d : (irqmp: 0x%x)\n", (unsigned int)i, printk 215 arch/sparc/kernel/leon_smp.c printk(KERN_INFO "Started CPU %d\n", (unsigned int)i); printk 218 arch/sparc/kernel/leon_smp.c printk(KERN_ERR "Processor %d is stuck.\n", i); printk 290 arch/sparc/kernel/leon_smp.c printk(KERN_INFO "leon: SMP IPIs at IRQ %d\n", leon_ipi_irq); printk 512 arch/sparc/kernel/mdesc.c printk(KERN_ERR "MD: mdesc alloc fails\n"); printk 518 arch/sparc/kernel/mdesc.c printk(KERN_ERR "MD: mdesc reread fails with %lu\n", printk 771 arch/sparc/kernel/mdesc.c printk("PLATFORM: banner-name [%s]\n", s); printk 773 arch/sparc/kernel/mdesc.c printk("PLATFORM: name [%s]\n", s); printk 777 arch/sparc/kernel/mdesc.c printk("PLATFORM: hostid [%08llx]\n", *v); printk 780 arch/sparc/kernel/mdesc.c printk("PLATFORM: serial# [%08llx]\n", *v); printk 782 arch/sparc/kernel/mdesc.c printk("PLATFORM: stick-frequency [%08llx]\n", *v); printk 785 arch/sparc/kernel/mdesc.c printk("PLATFORM: mac-address [%llx]\n", *v); printk 788 arch/sparc/kernel/mdesc.c printk("PLATFORM: watchdog-resolution [%llu ms]\n", *v); printk 791 arch/sparc/kernel/mdesc.c printk("PLATFORM: watchdog-max-timeout [%llu ms]\n", *v); printk 795 arch/sparc/kernel/mdesc.c printk("PLATFORM: max-cpus [%llu]\n", max_cpus); printk 1118 arch/sparc/kernel/mdesc.c printk(KERN_WARNING "Ignoring CPU %d which is " printk 1331 arch/sparc/kernel/mdesc.c printk("MDESC: Size is %lu bytes.\n", len); printk 67 arch/sparc/kernel/module.c printk("%s: no symtab found.\n", mod->name); printk 174 arch/sparc/kernel/module.c printk(KERN_ERR "module %s: Unknown relocation: %x\n", printk 138 arch/sparc/kernel/nmi.c printk(KERN_CONT "\n"); printk 140 arch/sparc/kernel/nmi.c printk(KERN_WARNING printk 144 arch/sparc/kernel/nmi.c printk(KERN_WARNING printk 146 arch/sparc/kernel/nmi.c printk(KERN_WARNING printk 177 arch/sparc/kernel/nmi.c printk(KERN_INFO "Testing NMI watchdog ... "); printk 199 arch/sparc/kernel/nmi.c printk("OK.\n"); printk 327 arch/sparc/kernel/of_device_32.c printk("%pOF reg[%d] -> %llx\n", printk 389 arch/sparc/kernel/of_device_32.c printk("%pOF: Could not register of device.\n", dp); printk 344 arch/sparc/kernel/of_device_64.c printk(KERN_WARNING "%pOF: Too many regs (%d), " printk 404 arch/sparc/kernel/of_device_64.c printk("%pOF reg[%d] -> %llx\n", printk 551 arch/sparc/kernel/of_device_64.c printk("%pOF: direct translate %x --> %x\n", printk 582 arch/sparc/kernel/of_device_64.c printk("%pOF: Apply [%pOF:%x] imap --> [%pOF:%x]\n", printk 599 arch/sparc/kernel/of_device_64.c printk("%pOF: PCI swizzle [%pOF] " printk 621 arch/sparc/kernel/of_device_64.c printk("%pOF: Apply IRQ trans [%pOF] %x --> %x\n", printk 658 arch/sparc/kernel/of_device_64.c printk(KERN_WARNING "%pOF: Too many irqs (%d), " printk 682 arch/sparc/kernel/of_device_64.c printk("%pOF: Could not register of device.\n", dp); printk 118 arch/sparc/kernel/of_device_common.c printk("of_device: Cannot handle size cells (%d) > 2.", ns); printk 696 arch/sparc/kernel/pci.c printk("PCI: Scanning PBM %pOF\n", node); printk 712 arch/sparc/kernel/pci.c printk(KERN_ERR "Failed to create bus for %pOF\n", node); printk 145 arch/sparc/kernel/pci_common.c printk("pci_read_config_word: misaligned reg [%x]\n", printk 155 arch/sparc/kernel/pci_common.c printk("pci_read_config_dword: misaligned reg [%x]\n", printk 234 arch/sparc/kernel/pci_common.c printk("pci_write_config_word: misaligned reg [%x]\n", printk 243 arch/sparc/kernel/pci_common.c printk("pci_write_config_dword: misaligned reg [%x]\n", printk 449 arch/sparc/kernel/pci_common.c printk("%s: PCI IO %pR offset %llx\n", printk 452 arch/sparc/kernel/pci_common.c printk("%s: PCI MEM %pR offset %llx\n", printk 462 arch/sparc/kernel/pci_common.c printk("%s: PCI MEM64 %pR offset %llx\n", printk 238 arch/sparc/kernel/pci_fire.c printk(KERN_ERR "MSI: Cannot allocate MSI queues (o=%lu).\n", printk 435 arch/sparc/kernel/pci_fire.c printk("%s: SUN4U PCIE Bus Module\n", pbm->name); printk 472 arch/sparc/kernel/pci_fire.c printk(KERN_ERR PFX "Cannot allocate pci_pbminfo.\n"); printk 478 arch/sparc/kernel/pci_fire.c printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n"); printk 54 arch/sparc/kernel/pci_msi.c printk(KERN_EMERG "MSI: Get head on msiqid[%lu] gives error %d\n", printk 59 arch/sparc/kernel/pci_msi.c printk(KERN_EMERG "MSI: Dequeue head[%lu] from msiqid[%lu] " printk 65 arch/sparc/kernel/pci_msi.c printk(KERN_EMERG "MSI: Set head[%lu] on msiqid[%lu] " printk 418 arch/sparc/kernel/pci_msi.c printk(KERN_INFO "%s: MSI Queue first[%u] num[%u] count[%u] " printk 424 arch/sparc/kernel/pci_msi.c printk(KERN_INFO "%s: MSI first[%u] num[%u] mask[0x%x] " printk 429 arch/sparc/kernel/pci_msi.c printk(KERN_INFO "%s: MSI addr32[0x%llx:0x%x] " printk 434 arch/sparc/kernel/pci_msi.c printk(KERN_INFO "%s: MSI queues at RA [%016lx]\n", printk 446 arch/sparc/kernel/pci_msi.c printk(KERN_INFO "%s: No MSI support.\n", pbm->name); printk 154 arch/sparc/kernel/pci_psycho.c printk("%s: Uncorrectable Error, primary error type[%s]\n", printk 162 arch/sparc/kernel/pci_psycho.c printk("%s: bytemask[%04lx] dword_offset[%lx] UPA_MID[%02lx] was_block(%d)\n", printk 168 arch/sparc/kernel/pci_psycho.c printk("%s: UE AFAR [%016lx]\n", pbm->name, afar); printk 169 arch/sparc/kernel/pci_psycho.c printk("%s: UE Secondary errors [", pbm->name); printk 173 arch/sparc/kernel/pci_psycho.c printk("(PIO)"); printk 177 arch/sparc/kernel/pci_psycho.c printk("(DMA Read)"); printk 181 arch/sparc/kernel/pci_psycho.c printk("(DMA Write)"); printk 184 arch/sparc/kernel/pci_psycho.c printk("(none)"); printk 185 arch/sparc/kernel/pci_psycho.c printk("]\n"); printk 233 arch/sparc/kernel/pci_psycho.c printk("%s: Correctable Error, primary error type[%s]\n", printk 245 arch/sparc/kernel/pci_psycho.c printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] " printk 253 arch/sparc/kernel/pci_psycho.c printk("%s: CE AFAR [%016lx]\n", pbm->name, afar); printk 254 arch/sparc/kernel/pci_psycho.c printk("%s: CE Secondary errors [", pbm->name); printk 258 arch/sparc/kernel/pci_psycho.c printk("(PIO)"); printk 262 arch/sparc/kernel/pci_psycho.c printk("(DMA Read)"); printk 266 arch/sparc/kernel/pci_psycho.c printk("(DMA Write)"); printk 269 arch/sparc/kernel/pci_psycho.c printk("(none)"); printk 270 arch/sparc/kernel/pci_psycho.c printk("]\n"); printk 326 arch/sparc/kernel/pci_psycho.c printk(KERN_WARNING "%s: Could not register PCIERR, " printk 522 arch/sparc/kernel/pci_psycho.c printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n"); printk 532 arch/sparc/kernel/pci_psycho.c printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n"); printk 543 arch/sparc/kernel/pci_psycho.c printk(KERN_ERR PFX "No reg property.\n"); printk 219 arch/sparc/kernel/pci_sabre.c printk("%s: Uncorrectable Error, primary error type[%s%s]\n", printk 227 arch/sparc/kernel/pci_sabre.c printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n", printk 232 arch/sparc/kernel/pci_sabre.c printk("%s: UE AFAR [%016lx]\n", pbm->name, afar); printk 233 arch/sparc/kernel/pci_sabre.c printk("%s: UE Secondary errors [", pbm->name); printk 237 arch/sparc/kernel/pci_sabre.c printk("(DMA Read)"); printk 241 arch/sparc/kernel/pci_sabre.c printk("(DMA Write)"); printk 245 arch/sparc/kernel/pci_sabre.c printk("(Translation Error)"); printk 248 arch/sparc/kernel/pci_sabre.c printk("(none)"); printk 249 arch/sparc/kernel/pci_sabre.c printk("]\n"); printk 278 arch/sparc/kernel/pci_sabre.c printk("%s: Correctable Error, primary error type[%s]\n", printk 288 arch/sparc/kernel/pci_sabre.c printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] " printk 295 arch/sparc/kernel/pci_sabre.c printk("%s: CE AFAR [%016lx]\n", pbm->name, afar); printk 296 arch/sparc/kernel/pci_sabre.c printk("%s: CE Secondary errors [", pbm->name); printk 300 arch/sparc/kernel/pci_sabre.c printk("(DMA Read)"); printk 304 arch/sparc/kernel/pci_sabre.c printk("(DMA Write)"); printk 307 arch/sparc/kernel/pci_sabre.c printk("(none)"); printk 308 arch/sparc/kernel/pci_sabre.c printk("]\n"); printk 348 arch/sparc/kernel/pci_sabre.c printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n", printk 358 arch/sparc/kernel/pci_sabre.c printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n", printk 363 arch/sparc/kernel/pci_sabre.c printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n", printk 430 arch/sparc/kernel/pci_sabre.c printk(KERN_ERR PFX "Multiple controllers unsupported.\n"); printk 486 arch/sparc/kernel/pci_sabre.c printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n"); printk 492 arch/sparc/kernel/pci_sabre.c printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n"); printk 509 arch/sparc/kernel/pci_sabre.c printk(KERN_ERR PFX "No reg property\n"); printk 538 arch/sparc/kernel/pci_sabre.c printk(KERN_ERR PFX "No virtual-dma property\n"); printk 558 arch/sparc/kernel/pci_sabre.c printk(KERN_ERR PFX "Strange virtual-dma size.\n"); printk 182 arch/sparc/kernel/pci_schizo.c printk("%s: STC_ERR(%d)[wr(%d)rd(%d)]\n", printk 192 arch/sparc/kernel/pci_schizo.c printk("%s: STC_TAG(%d)[PA(%016lx)VA(%08lx)V(%d)R(%d)]\n", printk 201 arch/sparc/kernel/pci_schizo.c printk("%s: STC_LINE(%d)[LIDX(%lx)SP(%lx)LADDR(%lx)EP(%lx)" printk 271 arch/sparc/kernel/pci_schizo.c printk("%s: IOMMU Error, type[%s]\n", printk 326 arch/sparc/kernel/pci_schizo.c printk("%s: IOMMU TAG(%d)[error(%s) ctx(%x) wr(%d) str(%d) " printk 334 arch/sparc/kernel/pci_schizo.c printk("%s: IOMMU DATA(%d)[valid(%d) cache(%d) ppg(%016lx)]\n", printk 402 arch/sparc/kernel/pci_schizo.c printk("%s: Uncorrectable Error, primary error type[%s]\n", printk 410 arch/sparc/kernel/pci_schizo.c printk("%s: bytemask[%04lx] qword_offset[%lx] SAFARI_AID[%02lx]\n", printk 415 arch/sparc/kernel/pci_schizo.c printk("%s: partial[%d] owned_in[%d] mtag[%lx] mtag_synd[%lx] ecc_sync[%lx]\n", printk 422 arch/sparc/kernel/pci_schizo.c printk("%s: UE AFAR [%016lx]\n", pbm->name, afar); printk 423 arch/sparc/kernel/pci_schizo.c printk("%s: UE Secondary errors [", pbm->name); printk 427 arch/sparc/kernel/pci_schizo.c printk("(PIO)"); printk 431 arch/sparc/kernel/pci_schizo.c printk("(DMA)"); printk 434 arch/sparc/kernel/pci_schizo.c printk("(none)"); printk 435 arch/sparc/kernel/pci_schizo.c printk("]\n"); printk 490 arch/sparc/kernel/pci_schizo.c printk("%s: Correctable Error, primary error type[%s]\n", printk 502 arch/sparc/kernel/pci_schizo.c printk("%s: bytemask[%04lx] qword_offset[%lx] SAFARI_AID[%02lx]\n", printk 507 arch/sparc/kernel/pci_schizo.c printk("%s: partial[%d] owned_in[%d] mtag[%lx] mtag_synd[%lx] ecc_sync[%lx]\n", printk 514 arch/sparc/kernel/pci_schizo.c printk("%s: CE AFAR [%016lx]\n", pbm->name, afar); printk 515 arch/sparc/kernel/pci_schizo.c printk("%s: CE Secondary errors [", pbm->name); printk 519 arch/sparc/kernel/pci_schizo.c printk("(PIO)"); printk 523 arch/sparc/kernel/pci_schizo.c printk("(DMA)"); printk 526 arch/sparc/kernel/pci_schizo.c printk("(none)"); printk 527 arch/sparc/kernel/pci_schizo.c printk("]\n"); printk 603 arch/sparc/kernel/pci_schizo.c printk("%s: Bus unusable error asserted.\n", printk 606 arch/sparc/kernel/pci_schizo.c printk("%s: PCI TRDY# timeout error asserted.\n", printk 609 arch/sparc/kernel/pci_schizo.c printk("%s: PCI excessive retry error asserted.\n", printk 612 arch/sparc/kernel/pci_schizo.c printk("%s: PCI discard timeout error asserted.\n", printk 615 arch/sparc/kernel/pci_schizo.c printk("%s: PCI streaming byte hole error asserted.\n", printk 618 arch/sparc/kernel/pci_schizo.c printk("%s: PCI SERR signal asserted.\n", printk 628 arch/sparc/kernel/pci_schizo.c printk("%s: PCI bus error, PCI_STATUS[%04x]\n", printk 665 arch/sparc/kernel/pci_schizo.c printk("%s: PCI Error, primary error type[%s]\n", printk 679 arch/sparc/kernel/pci_schizo.c printk("%s: bytemask[%04lx] was_block(%d) space(%s)\n", printk 689 arch/sparc/kernel/pci_schizo.c printk("%s: PCI AFAR [%016lx]\n", printk 691 arch/sparc/kernel/pci_schizo.c printk("%s: PCI Secondary errors [", printk 696 arch/sparc/kernel/pci_schizo.c printk("(Master Abort)"); printk 700 arch/sparc/kernel/pci_schizo.c printk("(Target Abort)"); printk 704 arch/sparc/kernel/pci_schizo.c printk("(Excessive Retries)"); printk 708 arch/sparc/kernel/pci_schizo.c printk("(Parity Error)"); printk 712 arch/sparc/kernel/pci_schizo.c printk("(Timeout)"); printk 716 arch/sparc/kernel/pci_schizo.c printk("(Bus Unusable)"); printk 719 arch/sparc/kernel/pci_schizo.c printk("(none)"); printk 720 arch/sparc/kernel/pci_schizo.c printk("]\n"); printk 800 arch/sparc/kernel/pci_schizo.c printk("%s: Unexpected Safari/JBUS error interrupt, errlog[%016llx]\n", printk 806 arch/sparc/kernel/pci_schizo.c printk("%s: Safari/JBUS interrupt, UNMAPPED error, interrogating IOMMUs.\n", printk 866 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register UE, " printk 873 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register CE, " printk 885 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register PCIERR, " printk 892 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register SERR, " printk 961 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register UE, " printk 968 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register CE, " printk 980 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register PCIERR, " printk 987 arch/sparc/kernel/pci_schizo.c printk(KERN_WARNING "%s: Could not register SERR, " printk 1165 arch/sparc/kernel/pci_schizo.c printk(KERN_ERR PFX "Strange virtual-dma size.\n"); printk 1201 arch/sparc/kernel/pci_schizo.c printk(KERN_ERR PFX "iommu_table_init() fails with %d\n", err); printk 1373 arch/sparc/kernel/pci_schizo.c printk("%s: %s PCI Bus Module ver[%x:%x]\n", printk 1428 arch/sparc/kernel/pci_schizo.c printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n"); printk 1436 arch/sparc/kernel/pci_schizo.c printk(KERN_ERR PFX "Cannot allocate PBM A iommu.\n"); printk 880 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR PFX "Strange virtual-dma[%08x:%08x].\n", printk 901 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR PFX "Error, kmalloc(arena.map) failed.\n"); printk 910 arch/sparc/kernel/pci_sun4v.c printk("%s: Imported %lu TSB entries from OBP\n", printk 1066 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR "MSI: Cannot allocate MSI queues (o=%lu).\n", printk 1081 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR "MSI: msiq register fails (err=%lu)\n", printk 1090 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR "MSI: Cannot read msiq (err=%lu)\n", printk 1095 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR "MSI: Bogus qconf " printk 1189 arch/sparc/kernel/pci_sun4v.c printk("%s: SUN4V PCI Bus Module\n", pbm->name); printk 1190 arch/sparc/kernel/pci_sun4v.c printk("%s: On NUMA node %d\n", pbm->name, pbm->numa_node); printk 1271 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR PFX "Could not find config registers\n"); printk 1291 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR PFX "Could not allocate pci_pbm_info\n"); printk 1297 arch/sparc/kernel/pci_sun4v.c printk(KERN_ERR PFX "Could not allocate pbm iommu\n"); printk 383 arch/sparc/kernel/pcic.c printk("PCIC: System %s is unknown, cannot route interrupts\n", printk 756 arch/sparc/kernel/pcic.c printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n", printk 831 arch/sparc/kernel/pcic.c printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); printk 62 arch/sparc/kernel/pmc.c printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME); printk 71 arch/sparc/kernel/pmc.c printk(KERN_INFO "%s: power management initialized\n", PMC_DEVNAME); printk 44 arch/sparc/kernel/power.c printk(KERN_INFO "%pOFn: Control reg at %llx\n", printk 50 arch/sparc/kernel/power.c printk(KERN_ERR "power: Cannot setup IRQ handler.\n"); printk 128 arch/sparc/kernel/process_32.c printk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx %s\n", printk 130 arch/sparc/kernel/process_32.c printk("PC: <%pS>\n", (void *) r->pc); printk 131 arch/sparc/kernel/process_32.c printk("%%G: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", printk 134 arch/sparc/kernel/process_32.c printk("%%O: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", printk 137 arch/sparc/kernel/process_32.c printk("RPC: <%pS>\n", (void *) r->u_regs[15]); printk 139 arch/sparc/kernel/process_32.c printk("%%L: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", printk 142 arch/sparc/kernel/process_32.c printk("%%I: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", printk 173 arch/sparc/kernel/process_32.c printk("[%08lx : ", pc); printk 174 arch/sparc/kernel/process_32.c printk("%pS ] ", (void *) pc); printk 177 arch/sparc/kernel/process_32.c printk("\n"); printk 377 arch/sparc/kernel/process_32.c printk("clone: parent stack:\n"); printk 386 arch/sparc/kernel/process_32.c printk("clone: child stack:\n"); printk 125 arch/sparc/kernel/process_64.c printk("l0: %08x l1: %08x l2: %08x l3: %08x " printk 129 arch/sparc/kernel/process_64.c printk("i0: %08x i1: %08x i2: %08x i3: %08x " printk 165 arch/sparc/kernel/process_64.c printk("l0: %016lx l1: %016lx l2: %016lx l3: %016lx\n", printk 167 arch/sparc/kernel/process_64.c printk("l4: %016lx l5: %016lx l6: %016lx l7: %016lx\n", printk 169 arch/sparc/kernel/process_64.c printk("i0: %016lx i1: %016lx i2: %016lx i3: %016lx\n", printk 171 arch/sparc/kernel/process_64.c printk("i4: %016lx i5: %016lx i6: %016lx i7: %016lx\n", printk 174 arch/sparc/kernel/process_64.c printk("I7: <%pS>\n", (void *) rwk->ins[7]); printk 181 arch/sparc/kernel/process_64.c printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x %s\n", regs->tstate, printk 183 arch/sparc/kernel/process_64.c printk("TPC: <%pS>\n", (void *) regs->tpc); printk 184 arch/sparc/kernel/process_64.c printk("g0: %016lx g1: %016lx g2: %016lx g3: %016lx\n", printk 187 arch/sparc/kernel/process_64.c printk("g4: %016lx g5: %016lx g6: %016lx g7: %016lx\n", printk 190 arch/sparc/kernel/process_64.c printk("o0: %016lx o1: %016lx o2: %016lx o3: %016lx\n", printk 193 arch/sparc/kernel/process_64.c printk("o4: %016lx o5: %016lx sp: %016lx ret_pc: %016lx\n", printk 196 arch/sparc/kernel/process_64.c printk("RPC: <%pS>\n", (void *) regs->u_regs[15]); printk 284 arch/sparc/kernel/process_64.c printk("%c CPU[%3d]: TSTATE[%016lx] TPC[%016lx] TNPC[%016lx] TASK[%s:%d]\n", printk 291 arch/sparc/kernel/process_64.c printk(" TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n", printk 297 arch/sparc/kernel/process_64.c printk(" TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n", printk 373 arch/sparc/kernel/process_64.c printk("%c CPU[%3d]: PCR[%08lx:%08lx:%08lx:%08lx] PIC[%08lx:%08lx:%08lx:%08lx]\n", printk 324 arch/sparc/kernel/prom_32.c printk(msg, of_console_path); printk 456 arch/sparc/kernel/prom_64.c printk(KERN_WARNING "Ignoring CPU %d which is " printk 632 arch/sparc/kernel/prom_64.c printk(msg, of_console_path); printk 350 arch/sparc/kernel/prom_irqtrans.c printk("tomatillo_wsync_handler: DMA won't sync [%llx:%llx]\n", printk 88 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: STC_ERR(%d)[wr(%d)" printk 99 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: STC_TAG(%d)[PA(%016llx)VA(%08llx)" printk 107 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: STC_LINE(%d)[LIDX(%llx)SP(%llx)" printk 183 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: IOMMU TAG(%d)[error(%s) wr(%d) " printk 190 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: IOMMU DATA(%d)[valid(%d) cache(%d) " printk 234 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: IOMMU Error, type[%s]\n", printk 267 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: PCI streaming byte hole " printk 270 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: PCI SERR signal asserted.\n", printk 282 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: PCI bus error, PCI_STATUS[%04x]\n", printk 321 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: PCI Error, primary error type[%s]\n", printk 331 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: bytemask[%04llx] UPA_MID[%02llx] was_block(%d)\n", printk 336 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: PCI AFAR [%016llx]\n", pbm->name, afar); printk 337 arch/sparc/kernel/psycho_common.c printk(KERN_ERR "%s: PCI Secondary errors [", pbm->name); printk 341 arch/sparc/kernel/psycho_common.c printk("(Master Abort)"); printk 345 arch/sparc/kernel/psycho_common.c printk("(Target Abort)"); printk 349 arch/sparc/kernel/psycho_common.c printk("(Excessive Retries)"); printk 353 arch/sparc/kernel/psycho_common.c printk("(Parity Error)"); printk 356 arch/sparc/kernel/psycho_common.c printk("(none)"); printk 357 arch/sparc/kernel/psycho_common.c printk("]\n"); printk 469 arch/sparc/kernel/psycho_common.c printk(KERN_INFO "%s: %s PCI Bus Module ver[%x:%x]\n", printk 71 arch/sparc/kernel/sbus.c printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %pOF\n", printk 296 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n", printk 304 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n", printk 309 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); printk 310 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: Secondary UE errors [", portid); printk 314 arch/sparc/kernel/sbus.c printk("(PIO)"); printk 318 arch/sparc/kernel/sbus.c printk("(DVMA Read)"); printk 322 arch/sparc/kernel/sbus.c printk("(DVMA Write)"); printk 325 arch/sparc/kernel/sbus.c printk("(none)"); printk 326 arch/sparc/kernel/sbus.c printk("]\n"); printk 369 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n", printk 381 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n", printk 387 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); printk 389 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: Secondary CE errors [", portid); printk 393 arch/sparc/kernel/sbus.c printk("(PIO)"); printk 397 arch/sparc/kernel/sbus.c printk("(DVMA Read)"); printk 401 arch/sparc/kernel/sbus.c printk("(DVMA Write)"); printk 404 arch/sparc/kernel/sbus.c printk("(none)"); printk 405 arch/sparc/kernel/sbus.c printk("]\n"); printk 448 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n", printk 457 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: size[%lx] MID[%lx]\n", printk 461 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); printk 462 arch/sparc/kernel/sbus.c printk("SYSIO[%x]: Secondary SBUS errors [", portid); printk 466 arch/sparc/kernel/sbus.c printk("(Late PIO Error)"); printk 470 arch/sparc/kernel/sbus.c printk("(Time Out)"); printk 474 arch/sparc/kernel/sbus.c printk("(Error Ack)"); printk 477 arch/sparc/kernel/sbus.c printk("(none)"); printk 478 arch/sparc/kernel/sbus.c printk("]\n"); printk 594 arch/sparc/kernel/sbus.c printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n", printk 144 arch/sparc/kernel/setup_32.c printk("Unknown boot switch (-%c)\n", c); printk 369 arch/sparc/kernel/setup_32.c printk("Booted under KADB. Syncing trap table.\n"); printk 390 arch/sparc/kernel/setup_32.c printk("\n"); printk 120 arch/sparc/kernel/setup_64.c printk("BOOT: Ignoring P-Cache force option.\n"); printk 129 arch/sparc/kernel/setup_64.c printk("Unknown boot switch (-%c)\n", c); printk 447 arch/sparc/kernel/setup_64.c printk(KERN_INFO "CPU CAPS: ["); printk 448 arch/sparc/kernel/setup_64.c printk(KERN_CONT "%s%s", printk 451 arch/sparc/kernel/setup_64.c printk(KERN_CONT "]\n"); printk 482 arch/sparc/kernel/setup_64.c printk(KERN_CONT "]\n"); printk 72 arch/sparc/kernel/smp_32.c printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08x", id, cpu_node); printk 88 arch/sparc/kernel/smp_32.c printk("Total of %d processors activated (%lu.%02lu BogoMIPS).\n", printk 103 arch/sparc/kernel/smp_32.c printk("SUN4E\n"); printk 107 arch/sparc/kernel/smp_32.c printk("SUN4U\n"); printk 111 arch/sparc/kernel/smp_32.c printk("UNKNOWN!\n"); printk 119 arch/sparc/kernel/smp_32.c printk("CPU[%d]: Returns from cpu_idle!\n", smp_processor_id()); printk 188 arch/sparc/kernel/smp_32.c printk("Entering SMP Mode...\n"); printk 197 arch/sparc/kernel/smp_32.c printk("Warning: NR_CPUS is too low to start all cpus\n"); printk 212 arch/sparc/kernel/smp_32.c printk("SUN4E\n"); printk 216 arch/sparc/kernel/smp_32.c printk("SUN4U\n"); printk 220 arch/sparc/kernel/smp_32.c printk("UNKNOWN!\n"); printk 253 arch/sparc/kernel/smp_32.c printk("boot cpu id != 0, this could work but is untested\n"); printk 275 arch/sparc/kernel/smp_32.c printk("SUN4E\n"); printk 279 arch/sparc/kernel/smp_32.c printk("SUN4U\n"); printk 283 arch/sparc/kernel/smp_32.c printk("UNKNOWN!\n"); printk 151 arch/sparc/kernel/smp_64.c printk("CPU[%d]: Returns from cpu_idle!\n", smp_processor_id()); printk 249 arch/sparc/kernel/smp_64.c printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n", printk 253 arch/sparc/kernel/smp_64.c printk(KERN_INFO "CPU %d: synchronized TICK with master CPU " printk 308 arch/sparc/kernel/smp_64.c printk(KERN_ERR "ldom_startcpu_cpuid: Cannot allocate " printk 340 arch/sparc/kernel/smp_64.c printk(KERN_ERR "ldom_startcpu_cpuid: sun4v_cpu_start() " printk 389 arch/sparc/kernel/smp_64.c printk("Processor %d is stuck.\n", cpu); printk 457 arch/sparc/kernel/smp_64.c printk("CPU[%d]: mondo stuckage result[%016llx]\n", printk 592 arch/sparc/kernel/smp_64.c printk("CPU[%d]: mondo stuckage result[%016llx]\n", printk 1178 arch/sparc/kernel/smp_64.c printk("CPU[%d]: Sending penguins to jail...", printk 1187 arch/sparc/kernel/smp_64.c printk("done\n"); printk 1196 arch/sparc/kernel/smp_64.c printk("CPU[%d]: Giving pardon to " printk 1420 arch/sparc/kernel/smp_64.c printk(KERN_ERR "CPU %u didn't die...\n", cpu); printk 1434 arch/sparc/kernel/smp_64.c printk(KERN_ERR "sun4v_cpu_stop() fails err=%lu\n", printk 1559 arch/sparc/kernel/smp_64.c printk(KERN_ERR "sun4v_cpu_stop() " printk 31 arch/sparc/kernel/sstate.c printk(KERN_WARNING "SSTATE: Failed to set soft-state to " printk 99 arch/sparc/kernel/starfire.c printk("starfire_translate: Are you kidding me?\n"); printk 264 arch/sparc/kernel/sun4d_irq.c printk(KERN_ERR "All sbus IRQs directed to CPU%d\n", cpuid); printk 364 arch/sparc/kernel/sun4d_irq.c printk(KERN_ERR "%pOF: Error, parent is not %s.\n", printk 371 arch/sparc/kernel/sun4d_irq.c printk(KERN_ERR "%pOF: Error, lacks board# property.\n", printk 501 arch/sparc/kernel/sun4d_irq.c printk(KERN_ERR "Clearing pending IRQs %08x on SBI %d\n", printk 140 arch/sparc/kernel/sun4d_smp.c printk(KERN_INFO "Starting CPU %d at %p\n", i, entry); printk 145 arch/sparc/kernel/sun4d_smp.c printk(KERN_INFO "prom_startcpu returned :)\n"); printk 155 arch/sparc/kernel/sun4d_smp.c printk(KERN_ERR "Processor %d is stuck.\n", i); printk 198 arch/sparc/kernel/sun4d_smp.c printk(KERN_INFO "smp4d: setup IPI at IRQ %d\n", SUN4D_IPI_IRQ); printk 316 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "Aieee: sun4m NMI received!\n"); printk 323 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar); printk 325 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "si=%08lx\n", si); printk 327 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "Module async error\n"); printk 329 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "MBus/SBus async error\n"); printk 331 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "ECC memory error\n"); printk 333 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "VME async error\n"); printk 334 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "you lose buddy boy...\n"); printk 367 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n"); printk 374 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n"); printk 406 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n", printk 443 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n"); printk 450 arch/sparc/kernel/sun4m_irq.c printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n"); printk 101 arch/sparc/kernel/sun4m_smp.c printk(KERN_INFO "Starting CPU %d at %p\n", i, entry); printk 113 arch/sparc/kernel/sun4m_smp.c printk(KERN_ERR "Processor %d is stuck.\n", i); printk 137 arch/sparc/kernel/sys_sparc_32.c printk ("%s[%d]: Unimplemented SPARC system call %d\n", printk 152 arch/sparc/kernel/sys_sparc_32.c printk ("TRAP: Entering kernel PC=%x, nPC=%x\n", regs->pc, regs->npc); printk 157 arch/sparc/kernel/sys_sparc_32.c printk ("TRAP: Returning to space: PC=%x nPC=%x\n", regs->pc, regs->npc); printk 496 arch/sparc/kernel/sys_sparc_64.c printk ("Unimplemented SPARC system call %ld\n",regs->u_regs[1]); printk 515 arch/sparc/kernel/sys_sparc_64.c printk ("TRAP: Entering kernel PC=%lx, nPC=%lx\n", regs->tpc, regs->tnpc); printk 519 arch/sparc/kernel/sys_sparc_64.c printk ("TRAP: Returning to space: PC=%lx nPC=%lx\n", regs->tpc, regs->tnpc); printk 297 arch/sparc/kernel/time_32.c printk(KERN_ERR "Registering RTC device failed\n"); printk 448 arch/sparc/kernel/time_64.c printk(KERN_INFO "%pOF: RTC regs at 0x%llx\n", printk 504 arch/sparc/kernel/time_64.c printk(KERN_INFO "%pOF: BQ4802 regs at 0x%llx\n", printk 568 arch/sparc/kernel/time_64.c printk(KERN_INFO "%pOF: Mostek regs at 0x%llx\n", printk 731 arch/sparc/kernel/time_64.c printk(KERN_WARNING printk 861 arch/sparc/kernel/time_64.c printk("clocksource: mult[%x] shift[%d]\n", printk 874 arch/sparc/kernel/time_64.c printk("clockevent: mult[%x] shift[%d]\n", printk 43 arch/sparc/kernel/traps_32.c printk("%c%08lx%c",i?' ':'<',pc[i],i?' ':'>'); printk 44 arch/sparc/kernel/traps_32.c printk("\n"); printk 56 arch/sparc/kernel/traps_32.c printk( printk 62 arch/sparc/kernel/traps_32.c printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter); printk 82 arch/sparc/kernel/traps_32.c printk("Caller[%08lx]: %pS\n", rw->ins[7], printk 87 arch/sparc/kernel/traps_32.c printk("Instruction DUMP:"); printk 98 arch/sparc/kernel/traps_32.c printk("Unimplemented Sparc TRAP, type = %02lx\n", type); printk 115 arch/sparc/kernel/traps_32.c printk("Ill instr. at pc=%08lx instruction is %08lx\n", printk 136 arch/sparc/kernel/traps_32.c printk("KERNEL MNA at pc %08lx npc %08lx called by %08lx\n", pc, npc, printk 144 arch/sparc/kernel/traps_32.c printk ("do_MNA!\n"); printk 229 arch/sparc/kernel/traps_32.c printk("Hmm, FP exception, fsr was %016lx\n", fpt->thread.fsr); printk 236 arch/sparc/kernel/traps_32.c printk("IEEE_754_exception\n"); printk 245 arch/sparc/kernel/traps_32.c printk("sequence_error (OS bug...)\n"); printk 248 arch/sparc/kernel/traps_32.c printk("hardware_error (uhoh!)\n"); printk 251 arch/sparc/kernel/traps_32.c printk("invalid_fp_register (user error)\n"); printk 269 arch/sparc/kernel/traps_32.c printk("WARNING: FPU exception from kernel mode. at pc=%08lx\n", printk 315 arch/sparc/kernel/traps_32.c printk("Watchpoint detected at PC %08lx NPC %08lx PSR %08lx\n", printk 327 arch/sparc/kernel/traps_32.c printk("Register Access Exception at PC %08lx NPC %08lx PSR %08lx\n", printk 343 arch/sparc/kernel/traps_32.c printk("Co-Processor Exception at PC %08lx NPC %08lx PSR %08lx\n", printk 359 arch/sparc/kernel/traps_32.c printk("kernel BUG at %s:%d!\n", file, line); printk 73 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "TRAPLOG: Error at trap level 0x%lx, " printk 78 arch/sparc/kernel/traps_64.c printk(KERN_EMERG printk 84 arch/sparc/kernel/traps_64.c printk("TRAPLOG: TPC<%pS>\n", (void *) p->trapstack[i].tpc); printk 132 arch/sparc/kernel/traps_64.c printk("kernel BUG at %s:%d!\n", file, line); printk 196 arch/sparc/kernel/traps_64.c printk("spitfire_insn_access_exception: SFSR[%016lx] " printk 230 arch/sparc/kernel/traps_64.c printk("sun4v_insn_access_exception: ADDR[%016lx] " printk 308 arch/sparc/kernel/traps_64.c printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc); printk 309 arch/sparc/kernel/traps_64.c printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n", printk 317 arch/sparc/kernel/traps_64.c printk("spitfire_data_access_exception: SFSR[%016lx] " printk 357 arch/sparc/kernel/traps_64.c printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc); printk 358 arch/sparc/kernel/traps_64.c printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n", printk 365 arch/sparc/kernel/traps_64.c printk("sun4v_data_access_exception: ADDR[%016lx] " printk 497 arch/sparc/kernel/traps_64.c printk(KERN_WARNING "CPU[%d]: UDBL Syndrome[%x] " printk 508 arch/sparc/kernel/traps_64.c printk(KERN_WARNING "CPU[%d]: UDBH Syndrome[%x] " printk 518 arch/sparc/kernel/traps_64.c printk(KERN_WARNING "CPU[%d]: Correctable ECC Error " printk 538 arch/sparc/kernel/traps_64.c printk(KERN_WARNING "CPU[%d]: Uncorrectable Error AFSR[%lx] " printk 634 arch/sparc/kernel/traps_64.c printk("CHEETAH: Enabling P-Cache on cpu %d.\n", printk 1176 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): Cheetah error trap taken afsr[%016lx] afar[%016lx] TL1(%d)\n", printk 1180 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): TPC[%lx] TNPC[%lx] O7[%lx] TSTATE[%lx]\n", printk 1183 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): ", printk 1185 arch/sparc/kernel/traps_64.c printk("TPC<%pS>\n", (void *) regs->tpc); printk 1186 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): M_SYND(%lx), E_SYND(%lx)%s%s\n", printk 1193 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): Highest priority error (%016lx) \"%s\"\n", printk 1213 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): AFAR E-syndrome [%s]\n", printk 1224 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): AFAR M-syndrome [%s]\n", printk 1230 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): D-cache idx[%x] tag[%016llx] utag[%016llx] stag[%016llx]\n", printk 1236 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): D-cache data0[%016llx] data1[%016llx] data2[%016llx] data3[%016llx]\n", printk 1242 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): I-cache idx[%x] tag[%016llx] utag[%016llx] stag[%016llx] " printk 1251 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): I-cache INSN0[%016llx] INSN1[%016llx] INSN2[%016llx] INSN3[%016llx]\n", printk 1257 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): I-cache INSN4[%016llx] INSN5[%016llx] INSN6[%016llx] INSN7[%016llx]\n", printk 1263 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): E-cache idx[%x] tag[%016llx]\n", printk 1266 arch/sparc/kernel/traps_64.c printk("%s" "ERROR(%d): E-cache data0[%016llx] data1[%016llx] data2[%016llx] data3[%016llx]\n", printk 1277 arch/sparc/kernel/traps_64.c printk("%s" "ERROR: Multiple-error (%016lx) \"%s\"\n", printk 1285 arch/sparc/kernel/traps_64.c printk(KERN_CRIT "ERROR: This condition is not recoverable.\n"); printk 1788 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "CPU[%d]: Cheetah+ %c-cache parity error at TPC[%016lx]\n", printk 1792 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "TPC<%pS>\n", (void *) regs->tpc); printk 1796 arch/sparc/kernel/traps_64.c printk(KERN_WARNING "CPU[%d]: Cheetah+ %c-cache parity error at TPC[%016lx]\n", printk 1800 arch/sparc/kernel/traps_64.c printk(KERN_WARNING "TPC<%pS>\n", (void *) regs->tpc); printk 1962 arch/sparc/kernel/traps_64.c printk("%s: insn effective address [0x%016llx]\n", printk 1973 arch/sparc/kernel/traps_64.c printk("%s: Reporting on cpu %d\n", pfx, cpu); printk 1974 arch/sparc/kernel/traps_64.c printk("%s: TPC [0x%016lx] <%pS>\n", printk 1977 arch/sparc/kernel/traps_64.c printk("%s: RAW [%016llx:%016llx:%016llx:%016llx\n", printk 1979 arch/sparc/kernel/traps_64.c printk("%s: %016llx:%016llx:%016llx:%016llx]\n", printk 1982 arch/sparc/kernel/traps_64.c printk("%s: handle [0x%016llx] stick [0x%016llx]\n", printk 1985 arch/sparc/kernel/traps_64.c printk("%s: type [%s]\n", pfx, sun4v_err_type_to_str(ent->err_type)); printk 1988 arch/sparc/kernel/traps_64.c printk("%s: attrs [0x%08x] < ", pfx, attrs); printk 1998 arch/sparc/kernel/traps_64.c printk("%s: raddr [0x%016llx]\n", pfx, ent->err_raddr); printk 2005 arch/sparc/kernel/traps_64.c printk("%s: size [0x%x]\n", pfx, ent->err_size); printk 2011 arch/sparc/kernel/traps_64.c printk("%s: cpu[%u]\n", pfx, ent->err_cpu); printk 2014 arch/sparc/kernel/traps_64.c printk("%s: asi [0x%02x]\n", pfx, ent->err_asi); printk 2020 arch/sparc/kernel/traps_64.c printk("%s: reg [0x%04x]\n", printk 2028 arch/sparc/kernel/traps_64.c printk("%s: Queue overflowed %d times.\n", printk 2269 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n", printk 2271 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-ITLB: TPC<%pS>\n", (void *) regs->tpc); printk 2272 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]); printk 2273 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-ITLB: O7<%pS>\n", printk 2275 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] " printk 2292 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n", printk 2294 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-DTLB: TPC<%pS>\n", (void *) regs->tpc); printk 2295 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]); printk 2296 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-DTLB: O7<%pS>\n", printk 2298 arch/sparc/kernel/traps_64.c printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] " printk 2308 arch/sparc/kernel/traps_64.c printk(KERN_CRIT "SUN4V: TLB hv call error %lu for op %lu\n", printk 2314 arch/sparc/kernel/traps_64.c printk(KERN_CRIT "SUN4V: XCALL TLB hv call error %lu for op %lu\n", printk 2432 arch/sparc/kernel/traps_64.c printk("Instruction DUMP:"); printk 2434 arch/sparc/kernel/traps_64.c printk("%c%08x%c",i?' ':'<',pc[i],i?' ':'>'); printk 2435 arch/sparc/kernel/traps_64.c printk("\n"); printk 2449 arch/sparc/kernel/traps_64.c printk("Instruction DUMP:"); printk 2451 arch/sparc/kernel/traps_64.c printk("%c%08x%c",i==3?' ':'<',buf[i],i==3?' ':'>'); printk 2452 arch/sparc/kernel/traps_64.c printk("\n"); printk 2479 arch/sparc/kernel/traps_64.c printk("Call Trace:\n"); printk 2500 arch/sparc/kernel/traps_64.c printk(" [%016lx] %pS\n", pc, (void *) pc); printk 2507 arch/sparc/kernel/traps_64.c printk(" [%016lx] %pS\n", pc, (void *) pc); printk 2531 arch/sparc/kernel/traps_64.c printk( printk 2537 arch/sparc/kernel/traps_64.c printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter); printk 2553 arch/sparc/kernel/traps_64.c printk("Caller[%016lx]: %pS\n", rw->ins[7], printk 59 arch/sparc/kernel/unaligned_32.c printk("Impossible unaligned trap. insn=%08x\n", insn); printk 222 arch/sparc/kernel/unaligned_32.c printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference in mna handler"); printk 224 arch/sparc/kernel/unaligned_32.c printk(KERN_ALERT "Unable to handle kernel paging request in mna handler"); printk 225 arch/sparc/kernel/unaligned_32.c printk(KERN_ALERT " at virtual address %08lx\n",address); printk 226 arch/sparc/kernel/unaligned_32.c printk(KERN_ALERT "current->{mm,active_mm}->context = %08lx\n", printk 229 arch/sparc/kernel/unaligned_32.c printk(KERN_ALERT "current->{mm,active_mm}->pgd = %08lx\n", printk 246 arch/sparc/kernel/unaligned_32.c printk("Unsupported unaligned load/store trap for kernel at <%08lx>.\n", printk 333 arch/sparc/kernel/unaligned_32.c printk("User FPU load/store unaligned unsupported.\n"); printk 357 arch/sparc/kernel/unaligned_32.c printk("Unaligned SWAP unsupported.\n"); printk 74 arch/sparc/kernel/unaligned_64.c printk("Impossible unaligned trap. insn=%08x\n", insn); printk 272 arch/sparc/kernel/unaligned_64.c printk(KERN_ALERT "Unable to handle kernel NULL " printk 275 arch/sparc/kernel/unaligned_64.c printk(KERN_ALERT "Unable to handle kernel paging " printk 277 arch/sparc/kernel/unaligned_64.c printk(KERN_ALERT " at virtual address %016lx\n",address); printk 278 arch/sparc/kernel/unaligned_64.c printk(KERN_ALERT "current->{active_,}mm->context = %016lx\n", printk 281 arch/sparc/kernel/unaligned_64.c printk(KERN_ALERT "current->{active_,}mm->pgd = %016lx\n", printk 301 arch/sparc/kernel/unaligned_64.c printk("Kernel unaligned access at TPC[%lx] %pS\n", printk 328 arch/sparc/kernel/unaligned_64.c printk("Unsupported unaligned load/store trap for kernel " printk 311 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Type string [%s] is too long.\n", printk 324 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Compat len %d for [%s] is too long.\n", printk 331 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Could not allocate vio_dev\n"); printk 401 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Could not register device %s, err=%d\n", printk 451 arch/sparc/kernel/vio.c printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev)); printk 512 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Could not register bus type err=%d\n", printk 523 arch/sparc/kernel/vio.c printk(KERN_INFO "VIO: No channel-devices MDESC node.\n"); printk 531 arch/sparc/kernel/vio.c printk(KERN_INFO "VIO: No channel-devices OBP node.\n"); printk 537 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Channel devices lacks compatible " printk 542 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Channel devices node lacks (%s) " printk 549 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Channel devices lacks %s property\n", printk 559 arch/sparc/kernel/vio.c printk(KERN_ERR "VIO: Could not create root device.\n"); printk 168 arch/sparc/kernel/viohs.c printk(KERN_ERR "vio: ID[%lu] Resetting connection.\n", printk 780 arch/sparc/kernel/viohs.c printk(KERN_WARNING "%s: Port %lu bind failed, " printk 792 arch/sparc/kernel/viohs.c printk(KERN_WARNING "%s: Port %lu connect failed, " printk 68 arch/sparc/lib/bitext.c /* P3 */ printk(KERN_ERR printk 171 arch/sparc/math-emu/math_32.c printk("In do_mathemu()... pc is %08lx\n", regs->pc); printk 172 arch/sparc/math-emu/math_32.c printk("fpqdepth is %ld\n", fpt->thread.fpqdepth); printk 174 arch/sparc/math-emu/math_32.c printk("%d: %08lx at %08lx\n", i, fpt->thread.fpqueue[i].insn, printk 180 arch/sparc/math-emu/math_32.c printk("precise trap at %08lx\n", regs->pc); printk 293 arch/sparc/math-emu/math_32.c printk("In do_mathemu(), emulating %08lx\n", insn); printk 344 arch/sparc/math-emu/math_32.c printk("attempt to emulate unrecognised FPop!\n"); printk 423 arch/sparc/math-emu/math_32.c printk("executing insn...\n"); printk 44 arch/sparc/mm/fault_32.c printk(KERN_ALERT printk 47 arch/sparc/mm/fault_32.c printk(KERN_ALERT "Unable to handle kernel paging request at virtual address %08lx\n", printk 50 arch/sparc/mm/fault_32.c printk(KERN_ALERT "tsk->{mm,active_mm}->context = %08lx\n", printk 52 arch/sparc/mm/fault_32.c printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %08lx\n", printk 116 arch/sparc/mm/fault_32.c printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x", printk 124 arch/sparc/mm/fault_32.c printk(KERN_CONT "\n"); printk 306 arch/sparc/mm/fault_32.c printk("Exception: PC<%08lx> faddr<%08lx>\n", printk 308 arch/sparc/mm/fault_32.c printk("EX_TABLE: insn<%08lx> fixup<%08x> g2<%08lx>\n", printk 46 arch/sparc/mm/fault_64.c printk(KERN_ALERT "Unable to handle kernel NULL " printk 49 arch/sparc/mm/fault_64.c printk(KERN_ALERT "Unable to handle kernel paging request " printk 52 arch/sparc/mm/fault_64.c printk(KERN_ALERT "tsk->{mm,active_mm}->context = %016lx\n", printk 56 arch/sparc/mm/fault_64.c printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %016lx\n", printk 64 arch/sparc/mm/fault_64.c printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n", printk 66 arch/sparc/mm/fault_64.c printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]); printk 67 arch/sparc/mm/fault_64.c printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]); printk 68 arch/sparc/mm/fault_64.c printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr); printk 143 arch/sparc/mm/fault_64.c printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x", printk 151 arch/sparc/mm/fault_64.c printk(KERN_CONT "\n"); printk 254 arch/sparc/mm/fault_64.c printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports " printk 117 arch/sparc/mm/init_32.c printk(KERN_CRIT "initrd extends beyond end of memory " printk 187 arch/sparc/mm/init_32.c printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", printk 238 arch/sparc/mm/init_32.c printk("mapping high region %08lx - %08lx\n", start_pfn, end_pfn); printk 733 arch/sparc/mm/init_64.c printk("Remapping the kernel... "); printk 735 arch/sparc/mm/init_64.c printk("done.\n"); printk 886 arch/sparc/mm/init_64.c printk(KERN_INFO f, ## a); \ printk 1438 arch/sparc/mm/init_64.c printk(KERN_ERR "Inconsistent NUMA state, " printk 1468 arch/sparc/mm/init_64.c printk(KERN_INFO "NUMA GROUP[%d]: cpus [ ", index); printk 1470 arch/sparc/mm/init_64.c printk("%d ", cpu); printk 1471 arch/sparc/mm/init_64.c printk("]\n"); printk 1615 arch/sparc/mm/init_64.c printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", printk 1617 arch/sparc/mm/init_64.c printk(KERN_INFO "Memory hole size: %ldMB\n", printk 1909 arch/sparc/mm/init_64.c printk("Allocated %ld bytes for kernel page tables.\n", printk 2400 arch/sparc/mm/init_64.c printk("Kernel: Using %d locked TLB entries for main kernel image.\n", printk 2474 arch/sparc/mm/init_64.c printk("Booting Linux...\n"); printk 33 arch/sparc/mm/io-unit.c #define IOD(x) printk(x) printk 127 arch/sparc/mm/iommu.c printk(KERN_INFO "IOMMU: impl %d vers %d table 0x%p[%d B] map [%d b]\n", printk 49 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: trace on\n"); printk 54 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: leon_get_ctable_ptr returned 0=>0\n"); printk 59 arch/sparc/mm/leon_mm.c printk(KERN_INFO printk 67 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: --- ctx (%x) ---\n", ctx); printk 73 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: pgd is entry level 3\n"); printk 81 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: pgd is invalid => 0\n"); printk 86 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: --- pgd (%x) ---\n", pgd); printk 96 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: pmd is entry level 2\n"); printk 104 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: pmd is invalid => 0\n"); printk 109 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: --- pmd (%x) ---\n", pmd); printk 115 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: !_pfn_valid(%x)=>0\n", printk 124 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: ped is entry level 1\n"); printk 132 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: ped is invalid => 0\n"); printk 137 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: --- ped (%x) ---\n", ped); printk 147 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: ptr is entry level 0\n"); printk 154 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: ptr is invalid => 0\n"); printk 177 arch/sparc/mm/leon_mm.c printk(KERN_INFO "swprobe: padde %x\n", paddr_calc); printk 259 arch/sparc/mm/leon_mm.c printk(KERN_INFO "CACHE: %s cache, set size %dk\n", printk 265 arch/sparc/mm/leon_mm.c printk(KERN_INFO "CACHE: not flushing on every context switch\n"); printk 182 arch/sparc/mm/srmmu.c printk(KERN_ERR "Size 0x%x too small for nocache request\n", printk 187 arch/sparc/mm/srmmu.c printk(KERN_ERR "Size 0x%x unaligned int nocache request\n", printk 197 arch/sparc/mm/srmmu.c printk(KERN_ERR "srmmu: out of nocache %d: %d/%d\n", printk 226 arch/sparc/mm/srmmu.c printk("Vaddr %lx is smaller than nocache base 0x%lx\n", printk 231 arch/sparc/mm/srmmu.c printk("Vaddr %lx is bigger than nocache end 0x%lx\n", printk 236 arch/sparc/mm/srmmu.c printk("Size 0x%x is not a power of 2\n", size); printk 240 arch/sparc/mm/srmmu.c printk("Size 0x%x is too small\n", size); printk 244 arch/sparc/mm/srmmu.c printk("Vaddr %lx is not aligned to size 0x%x\n", vaddr, size); printk 614 arch/sparc/mm/srmmu.c printk("flush ctx %02x curr %02x\n", ctx1, cctx); printk 1093 arch/sparc/mm/srmmu.c printk("SRMMU: Using VAC size of %d bytes, line size %d bytes.\n", printk 267 arch/sparc/mm/tsb.c printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n", printk 67 arch/sparc/oprofile/init.c printk(KERN_INFO "oprofile: Using perfctr NMI timer interrupt.\n"); printk 72 arch/sparc/prom/init_32.c printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n", printk 55 arch/sparc/prom/init_64.c printk("PROMLIB: Sun IEEE Boot Prom '%s'\n", prom_version); printk 56 arch/sparc/prom/init_64.c printk("PROMLIB: Root node compatible: %s\n", prom_root_compatible); printk 17 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 25 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 32 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 38 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 45 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 52 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 60 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 67 arch/um/drivers/chan_kern.c printk(KERN_ERR "Using a channel type which is configured out of " printk 286 arch/um/drivers/chan_kern.c printk(KERN_INFO "Console initialized on /dev/%s%d\n", co->name, printk 156 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : failed to write " printk 169 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : sigprocmask failed, " printk 177 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : setsid failed, errno = %d\n", printk 183 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : TIOCSCTTY failed on " printk 189 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : tcsetpgrp failed on " printk 202 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : failed to read " printk 214 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_thread : write failed, " printk 228 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_tramp : os_pipe failed, err = %d\n", printk 243 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n", printk 251 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_tramp : failed to read " printk 253 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "read failed, err = %d\n", errno); printk 254 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "fd %d will not support SIGWINCH\n", fd); printk 260 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd " printk 298 arch/um/drivers/chan_user.c printk(UM_KERN_ERR "register_winch : failed to write " printk 19 arch/um/drivers/cow_sys.h #define cow_printf printk printk 37 arch/um/drivers/daemon_kern.c printk("daemon backend (uml_switch version %d) - %s:%s", printk 39 arch/um/drivers/daemon_kern.c printk("\n"); printk 73 arch/um/drivers/daemon_kern.c printk(KERN_WARNING "daemon_setup : Ignoring data socket " printk 38 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un " printk 58 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : control socket failed, " printk 66 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : control connect failed, " printk 74 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : data socket failed, " printk 80 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : data bind failed, " printk 87 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un " printk 99 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : control setup request " printk 107 arch/um/drivers/daemon_user.c printk(UM_KERN_ERR "daemon_open : read of data socket failed, " printk 29 arch/um/drivers/fd.c printk(UM_KERN_ERR "fd_init : channel type 'fd' must specify a " printk 36 arch/um/drivers/fd.c printk(UM_KERN_ERR "fd_init : couldn't parse file descriptor " printk 79 arch/um/drivers/fd.c printk(UM_KERN_ERR "Failed to restore terminal state - " printk 42 arch/um/drivers/harddog_user.c printk("harddog_open - os_pipe failed, err = %d\n", -err); printk 48 arch/um/drivers/harddog_user.c printk("harddog_open - os_pipe failed, err = %d\n", -err); printk 74 arch/um/drivers/harddog_user.c printk("harddog_open - run_helper failed, errno = %d\n", -err); printk 80 arch/um/drivers/harddog_user.c printk("harddog_open - EOF on watchdog pipe\n"); printk 86 arch/um/drivers/harddog_user.c printk("harddog_open - read of watchdog pipe failed, " printk 119 arch/um/drivers/harddog_user.c printk("ping_watchdog - write failed, ret = %d, err = %d\n", printk 78 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostaudio: read called, count = %d\n", count); printk 105 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostaudio: write called, count = %d\n", count); printk 128 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostaudio: poll called (unimplemented)\n"); printk 142 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostaudio: ioctl called, cmd = %u\n", cmd); printk 185 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostaudio: open called (host: %s)\n", dsp); printk 218 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostaudio: release called\n"); printk 234 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostmixer: ioctl called\n"); printk 247 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostmixer: open called (host: %s)\n", mixer); printk 267 arch/um/drivers/hostaudio_kern.c printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', " printk 283 arch/um/drivers/hostaudio_kern.c printk(KERN_DEBUG "hostmixer: release called\n"); printk 326 arch/um/drivers/hostaudio_kern.c printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n", printk 332 arch/um/drivers/hostaudio_kern.c printk(KERN_ERR "hostaudio: couldn't register DSP device!\n"); printk 338 arch/um/drivers/hostaudio_kern.c printk(KERN_ERR "hostmixer: couldn't register mixer " printk 93 arch/um/drivers/line.c printk(KERN_ERR "buffer_data - atomic allocation " printk 453 arch/um/drivers/line.c printk(KERN_ERR "Failed to set up %s with " printk 572 arch/um/drivers/line.c printk(KERN_ERR "register_lines : can't register %s driver\n", printk 637 arch/um/drivers/line.c printk(KERN_ERR "winch_interrupt : " printk 639 arch/um/drivers/line.c printk(KERN_ERR "fd %d is losing SIGWINCH " printk 672 arch/um/drivers/line.c printk(KERN_ERR "register_winch_irq - kmalloc failed\n"); printk 685 arch/um/drivers/line.c printk(KERN_ERR "register_winch_irq - failed to register " printk 753 arch/um/drivers/line.c printk(KERN_ERR "Failed to allocate buffer for xterm title\n"); printk 120 arch/um/drivers/mconsole_kern.c printk(KERN_WARNING "%.*s", len, ptr); printk 140 arch/um/drivers/mconsole_kern.c printk(KERN_ERR "open /proc/%s: %ld\n", ptr, PTR_ERR(file)); printk 356 arch/um/drivers/mconsole_kern.c printk(KERN_ERR "Failed to release " printk 413 arch/um/drivers/mconsole_kern.c else printk(KERN_ERR "Can't release memory to the host - memory " printk 705 arch/um/drivers/mconsole_kern.c printk(KERN_ERR "Failed to initialize management console\n"); printk 716 arch/um/drivers/mconsole_kern.c printk(KERN_ERR "Failed to get IRQ for management console\n"); printk 726 arch/um/drivers/mconsole_kern.c else printk(KERN_ERR "mconsole_setup failed to strdup " printk 730 arch/um/drivers/mconsole_kern.c printk(KERN_INFO "mconsole (version %d) initialized on %s\n", printk 770 arch/um/drivers/mconsole_kern.c printk(KERN_INFO "create_proc_mconsole : proc_create failed\n"); printk 798 arch/um/drivers/mconsole_kern.c else printk(KERN_ERR "mconsole_setup : Unknown option - '%s'\n", str); printk 190 arch/um/drivers/mconsole_user.c printk(UM_KERN_ERR "mconsole_notify - socket failed, " printk 215 arch/um/drivers/mconsole_user.c printk(UM_KERN_ERR "mconsole_notify - sendto failed, " printk 107 arch/um/drivers/mmapper_kern.c printk(KERN_INFO "Mapper v0.1\n"); printk 111 arch/um/drivers/mmapper_kern.c printk(KERN_ERR "mmapper_init - find_iomem failed\n"); printk 118 arch/um/drivers/mmapper_kern.c printk(KERN_ERR "mmapper - misc_register failed, err = %d\n", printk 127 arch/um/drivers/net_kern.c printk(KERN_ERR printk 164 arch/um/drivers/net_kern.c printk(KERN_ERR "uml_net_open: failed to get irq(%d)\n", err); printk 235 arch/um/drivers/net_kern.c printk(KERN_ERR "uml_net_start_xmit: failed(%d)\n", len); printk 302 arch/um/drivers/net_kern.c printk(KERN_ERR printk 310 arch/um/drivers/net_kern.c printk(KERN_ERR printk 316 arch/um/drivers/net_kern.c printk(KERN_ERR printk 322 arch/um/drivers/net_kern.c printk(KERN_WARNING printk 325 arch/um/drivers/net_kern.c printk(KERN_WARNING "You should set the 2nd rightmost bit in " printk 327 arch/um/drivers/net_kern.c printk(KERN_WARNING "i.e. %02x:%02x:%02x:%02x:%02x:%02x\n", printk 334 arch/um/drivers/net_kern.c printk(KERN_INFO printk 392 arch/um/drivers/net_kern.c printk(KERN_ERR "eth_configure failed to allocate struct " printk 399 arch/um/drivers/net_kern.c printk(KERN_ERR "eth_configure: failed to allocate struct " printk 415 arch/um/drivers/net_kern.c printk(KERN_INFO "Netdevice %d (%pM) : ", n, dev->dev_addr); printk 646 arch/um/drivers/net_kern.c printk(KERN_ERR "eth_setup - Couldn't parse '%s' : %s\n", printk 893 arch/um/drivers/net_kern.c printk(KERN_ERR "tap_setup_common - Extra garbage on " printk 26 arch/um/drivers/net_user.c printk(UM_KERN_ERR "Invalid tap IP address - '%s'\n", printk 44 arch/um/drivers/net_user.c printk(UM_KERN_ERR "The tap IP address and the UML eth IP " printk 88 arch/um/drivers/net_user.c printk(UM_KERN_ERR "read_output - read of %s failed, " printk 91 arch/um/drivers/net_user.c printk(UM_KERN_ERR "read_output - read of %s failed, read only " printk 187 arch/um/drivers/net_user.c printk(UM_KERN_ERR "change_tramp - pipe failed, err = %d\n", printk 225 arch/um/drivers/net_user.c printk(UM_KERN_ERR "change : failed to allocate output " printk 235 arch/um/drivers/net_user.c printk("%s", output); printk 31 arch/um/drivers/pcap_kern.c printk("pcap backend, host interface %s\n", ppri->host_if); printk 68 arch/um/drivers/pcap_kern.c printk(KERN_ERR "pcap_setup - Extra garbage on " printk 88 arch/um/drivers/pcap_kern.c printk(KERN_ERR "pcap_setup : bad option - '%s'\n", printk 25 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_user_init : pcap_open_live failed - " printk 47 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : dev_netmask failed\n"); printk 54 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : kmalloc failed\n"); printk 62 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : pcap_compile failed - " printk 69 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_open : pcap_setfilter " printk 119 arch/um/drivers/pcap_user.c printk(UM_KERN_ERR "pcap_dispatch failed - %s\n", printk 55 arch/um/drivers/port_kern.c printk(KERN_ERR "pipe_interrupt : os_rcv_fd returned %d\n", printk 84 arch/um/drivers/port_kern.c printk(KERN_ERR "port_accept : port_connection " printk 91 arch/um/drivers/port_kern.c printk(KERN_ERR "port_accept : failed to allocate " printk 104 arch/um/drivers/port_kern.c printk(KERN_ERR "port_accept : failed to get IRQ for " printk 111 arch/um/drivers/port_kern.c printk(KERN_ERR "No one waiting for port\n"); printk 173 arch/um/drivers/port_kern.c printk(KERN_ERR "Allocation of port list failed\n"); printk 179 arch/um/drivers/port_kern.c printk(KERN_ERR "binding to port %d failed, errno = %d\n", printk 186 arch/um/drivers/port_kern.c printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num); printk 205 arch/um/drivers/port_kern.c printk(KERN_ERR "Allocation of port device entry failed\n"); printk 32 arch/um/drivers/port_user.c printk(UM_KERN_ERR "port_init : channel type 'port' must " printk 39 arch/um/drivers/port_user.c printk(UM_KERN_ERR "port_init : couldn't parse port '%s'\n", printk 50 arch/um/drivers/pty.c printk(UM_KERN_ERR "open_pts : Failed to open pts\n"); printk 109 arch/um/drivers/pty.c printk(UM_KERN_ERR "getmaster - no usable host pty devices\n"); printk 141 arch/um/drivers/random.c printk (KERN_ERR RNG_MODULE_NAME ": misc device register " printk 39 arch/um/drivers/slip_kern.c printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr); printk 33 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "could not get initial terminal " printk 51 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "failed to set terminal attributes\n"); printk 82 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp : pipe failed, err = %d\n", printk 99 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp : failed to allocate output " printk 108 arch/um/drivers/slip_user.c printk("%s", output); printk 134 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip-open : Failed to open pty, err = %d\n", printk 142 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "Couldn't open tty for slip line, " printk 161 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp failed - err = %d\n", printk 167 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "get_ifname failed, err = %d\n", printk 176 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "Failed to set slip discipline " printk 206 arch/um/drivers/slip_user.c printk(UM_KERN_ERR "slip_tramp failed - errno = %d\n", -err); printk 41 arch/um/drivers/slirp_kern.c printk("SLIRP backend - command line:"); printk 43 arch/um/drivers/slirp_kern.c printk(" '%s'",spri->argw.argv[i]); printk 44 arch/um/drivers/slirp_kern.c printk("\n"); printk 85 arch/um/drivers/slirp_kern.c printk(KERN_WARNING "slirp_setup: truncating slirp " printk 60 arch/um/drivers/slirp_user.c printk(UM_KERN_ERR "slirp_tramp failed - errno = %d\n", -err); printk 88 arch/um/drivers/slirp_user.c printk(UM_KERN_ERR "slirp_close: no child process to shut " printk 95 arch/um/drivers/slirp_user.c printk(UM_KERN_ERR "slirp_close: sending hangup to %d failed " printk 26 arch/um/drivers/ssl.c printk(KERN_INFO "Serial line %d assigned device '%s'\n", dev, printk 155 arch/um/drivers/ssl.c printk(KERN_INFO "Initializing software serial port version %d\n", printk 173 arch/um/drivers/ssl.c printk(KERN_ERR "setup_one_line failed for " printk 32 arch/um/drivers/stdio_console.c printk(KERN_INFO "Virtual console %d assigned device '%s'\n", dev, printk 161 arch/um/drivers/stdio_console.c printk(KERN_INFO "Initialized stdio console driver\n"); printk 175 arch/um/drivers/stdio_console.c printk(KERN_ERR "setup_one_line failed for " printk 24 arch/um/drivers/tty.c printk(UM_KERN_ERR "tty_init : channel type 'tty' must specify " printk 297 arch/um/drivers/ubd_kern.c printk(KERN_INFO "Setting extra ubd major number to %d\n", printk 394 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to initialize device with \"%s\" : " printk 428 arch/um/drivers/ubd_kern.c printk("udb%s specified on command line is almost certainly a ubd -> " printk 515 arch/um/drivers/ubd_kern.c printk(KERN_ERR "spurious interrupt in ubd_handler, " printk 611 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to get modification time of backing " printk 618 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to get size of backing file \"%s\", " printk 626 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Size mismatch (%llu vs %llu) of COW header " printk 631 arch/um/drivers/ubd_kern.c printk(KERN_ERR "mtime mismatch (%ld vs %ld) of COW header vs " printk 650 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Couldn't stat '%s', err = %d\n", from_cmdline, printk 656 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Couldn't stat '%s', err = %d\n", from_cow, printk 663 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Backing file mismatch - \"%s\" requested, " printk 694 arch/um/drivers/ubd_kern.c printk(KERN_INFO "Not locking \"%s\" on the host\n", file); printk 698 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to lock '%s', err = %d\n", printk 711 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to read COW header from COW file " printk 724 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Switching backing file to '%s'\n", printk 729 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Switch failed, errno = %d\n", -err); printk 759 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Open of COW file '%s' failed, errno = %d\n", printk 809 arch/um/drivers/ubd_kern.c printk(KERN_INFO "Creating \"%s\" as COW file for " printk 815 arch/um/drivers/ubd_kern.c printk("Failed to open '%s', errno = %d\n", ubd_dev->file, printk 827 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to vmalloc COW bitmap\n"); printk 1156 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to initialize ubd buffering\n"); printk 1167 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to initialize ubd buffering\n"); printk 1175 arch/um/drivers/ubd_kern.c printk(KERN_ERR "Failed to initialize ubd device %d :" printk 1190 arch/um/drivers/ubd_kern.c printk(KERN_INFO "ubd: Synchronous mode\n"); printk 1198 arch/um/drivers/ubd_kern.c printk(KERN_ERR printk 1207 arch/um/drivers/ubd_kern.c printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); printk 1223 arch/um/drivers/ubd_kern.c printk(KERN_ERR "%s: Can't open \"%s\": errno = %d\n", printk 34 arch/um/drivers/ubd_user.c printk("start_io_thread - os_pipe failed, err = %d\n", -err); printk 46 arch/um/drivers/ubd_user.c printk("start_io_thread - failed to set nonblocking I/O.\n"); printk 53 arch/um/drivers/ubd_user.c printk("start_io_thread - clone failed : errno = %d\n", errno); printk 43 arch/um/drivers/umcast_kern.c printk(KERN_INFO "ucast backend address: %s:%u listen port: " printk 46 arch/um/drivers/umcast_kern.c printk(KERN_INFO "mcast backend multicast address: %s:%u, " printk 84 arch/um/drivers/umcast_kern.c printk(KERN_ERR "mcast_setup - Extra garbage on " printk 92 arch/um/drivers/umcast_kern.c printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", printk 101 arch/um/drivers/umcast_kern.c printk(KERN_ERR "mcast_setup - Bad ttl : '%s'\n", printk 110 arch/um/drivers/umcast_kern.c printk(KERN_INFO "Configured mcast device: %s:%u-%u\n", init->addr, printk 130 arch/um/drivers/umcast_kern.c printk(KERN_ERR "ucast_setup - Extra garbage on " printk 138 arch/um/drivers/umcast_kern.c printk(KERN_ERR "ucast_setup - Bad listen port : " printk 147 arch/um/drivers/umcast_kern.c printk(KERN_ERR "ucast_setup - Bad remote port : " printk 155 arch/um/drivers/umcast_kern.c printk(KERN_INFO "Configured ucast device: :%u -> %s:%u\n", printk 28 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in " printk 82 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open : data socket failed, " printk 89 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: SO_REUSEADDR failed, " printk 99 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_TTL " printk 108 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_LOOP " printk 117 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open : data bind failed, " printk 129 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_open: IP_ADD_MEMBERSHIP " printk 131 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "There appears not to be a " printk 134 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "eth0 should be configured in order " printk 160 arch/um/drivers/umcast_user.c printk(UM_KERN_ERR "umcast_close: IP_DROP_MEMBERSHIP " printk 31 arch/um/drivers/vde_kern.c printk("vde backend - %s, ", vpri->vde_switch ? printk 36 arch/um/drivers/vde_kern.c printk("\n"); printk 47 arch/um/drivers/vde_kern.c printk(KERN_ERR "vde_read - we have no VDECONN to read from"); printk 59 arch/um/drivers/vde_kern.c printk(KERN_ERR "vde_write - we have no VDECONN to write to"); printk 86 arch/um/drivers/vde_kern.c printk(KERN_WARNING "vde_setup - Ignoring extra data :" printk 92 arch/um/drivers/vde_kern.c printk(KERN_ERR "vde_setup - Bad port : '%s'\n", printk 101 arch/um/drivers/vde_kern.c printk(KERN_ERR "vde_setup - Bad mode : '%s'\n", printk 107 arch/um/drivers/vde_kern.c printk(KERN_INFO "Configured vde device: %s\n", init->vde_switch ? printk 25 arch/um/drivers/vde_user.c printk(UM_KERN_ERR "vde_user_init: vde_open failed, " printk 30 arch/um/drivers/vde_user.c printk(UM_KERN_INFO "vde backend - connection opened\n"); printk 44 arch/um/drivers/vde_user.c printk(UM_KERN_WARNING "vde_open - we have no VDECONN to open"); printk 53 arch/um/drivers/vde_user.c printk(UM_KERN_INFO "vde backend - closing connection\n"); printk 61 arch/um/drivers/vde_user.c printk(UM_KERN_WARNING "vde_remove - we have no VDECONN to remove"); printk 81 arch/um/drivers/vde_user.c printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args " printk 92 arch/um/drivers/vde_user.c args->port ? printk("port %d", args->port) : printk 93 arch/um/drivers/vde_user.c printk("undefined port"); printk 1466 arch/um/drivers/vector_kern.c printk(KERN_ERR "eth_configure failed to allocate struct " printk 1472 arch/um/drivers/vector_kern.c printk(KERN_ERR "eth_configure: failed to allocate struct " printk 1604 arch/um/drivers/vector_kern.c printk(KERN_ERR "vector_setup - Couldn't parse '%s' : %s\n", printk 109 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "vector_setup - Couldn't parse '%s'\n", arg); printk 131 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to open tun device\n"); printk 140 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to select tap interface\n"); printk 183 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err); printk 197 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to parse interface spec\n"); printk 203 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to allocate file descriptors\n"); printk 215 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to create tun interface\n"); printk 222 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_tap: init failed, error %d", fd); printk 235 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to parse interface spec\n"); printk 241 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to allocate file descriptors\n"); printk 253 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "uml_tap: failed to create tun interface: %i\n", result->tx_fd); printk 261 arch/um/drivers/vector_user.c printk(UM_KERN_ERR printk 267 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_hybrid: init failed"); printk 285 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "unix open:cannot allocate remote addr"); printk 290 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "unix open:cannot allocate remote addr"); printk 300 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "bess open:cannot allocate local addr"); printk 312 arch/um/drivers/vector_user.c printk(KERN_ERR "Unsupported unix socket type\n"); printk 318 arch/um/drivers/vector_user.c printk(UM_KERN_ERR printk 326 arch/um/drivers/vector_user.c printk(UM_KERN_ERR UNIX_BIND_FAIL, errno); printk 333 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "bess open:cannot connect to %s %i", remote_addr->sun_path, -errno); printk 383 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err); printk 409 arch/um/drivers/vector_user.c printk(UM_KERN_INFO VNET_HDR_FAIL, fd); printk 420 arch/um/drivers/vector_user.c printk(UM_KERN_INFO TUN_GET_F_FAIL, strerror(errno)); printk 424 arch/um/drivers/vector_user.c printk(UM_KERN_INFO "tapraw: No VNET HEADER support"); printk 484 arch/um/drivers/vector_user.c printk(KERN_ERR "Unsupported socket type\n"); printk 491 arch/um/drivers/vector_user.c printk(UM_KERN_ERR printk 500 arch/um/drivers/vector_user.c printk(UM_KERN_ERR printk 509 arch/um/drivers/vector_user.c printk(UM_KERN_ERR L2TPV3_BIND_FAIL, errno); printk 520 arch/um/drivers/vector_user.c printk(UM_KERN_ERR printk 547 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "user_init_socket: init failed, error %d", err); printk 565 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "no parsed config for unit %d\n", unit); printk 570 arch/um/drivers/vector_user.c printk(UM_KERN_ERR "missing transport for unit %d\n", unit); printk 668 arch/um/drivers/vector_user.c printk(KERN_ERR BPF_ATTACH_FAIL, bpf_len, fd, -errno); printk 102 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open: $DISPLAY not set.\n"); printk 115 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : mkstemp failed, errno = %d\n", printk 122 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", printk 131 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : create_unix_socket failed, " printk 140 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : run_helper failed, " printk 147 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : failed to set descriptor " printk 155 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : os_rcv_fd failed, err = %d\n", printk 162 arch/um/drivers/xterm.c printk(UM_KERN_ERR "xterm_open : failed to set xterm " printk 42 arch/um/drivers/xterm_kern.c printk(KERN_ERR "xterm_fd : failed to allocate xterm_wait\n"); printk 55 arch/um/drivers/xterm_kern.c printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, " printk 18 arch/um/include/asm/hardirq.h printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); printk 30 arch/um/include/asm/pgtable-2level.h printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), \ printk 33 arch/um/include/asm/pgtable-2level.h printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), \ printk 48 arch/um/include/asm/pgtable-3level.h printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), \ printk 51 arch/um/include/asm/pgtable-3level.h printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), \ printk 54 arch/um/include/asm/pgtable-3level.h printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), \ printk 41 arch/um/include/shared/user.h extern int printk(const char *fmt, ...) printk 33 arch/um/kernel/exec.c printk(KERN_ERR "flush_thread - clearing address space failed, " printk 73 arch/um/kernel/exitcode.c printk(KERN_WARNING "make_proc_exitcode : Failed to register " printk 35 arch/um/kernel/initrd.c printk(KERN_ERR "\"%s\" is a zero-size initrd\n", initrd); printk 69 arch/um/kernel/initrd.c printk(KERN_ERR "Opening '%s' failed - err = %d\n", filename, printk 75 arch/um/kernel/initrd.c printk(KERN_ERR "Read of %d bytes from '%s' failed, " printk 158 arch/um/kernel/irq.c printk(KERN_ERR printk 174 arch/um/kernel/irq.c printk(KERN_ERR printk 51 arch/um/kernel/physmem.c printk(KERN_ERR "try increasing the host's " printk 208 arch/um/kernel/physmem.c printk(KERN_ERR "Mapping iomem region for driver '%s' " printk 370 arch/um/kernel/process.c printk(KERN_WARNING "Failed to register /proc/sysemu\n"); printk 29 arch/um/kernel/sigio.c printk(KERN_ERR "write_sigio_irq : um_request_irq failed, " printk 80 arch/um/kernel/skas/mmu.c printk(KERN_ERR "init_new_context_skas - init_ldt" printk 116 arch/um/kernel/skas/mmu.c printk(KERN_ERR "install_special_mapping returned %d\n", err); printk 151 arch/um/kernel/skas/mmu.c printk(KERN_ERR "corrupt mm_context - pid = %d\n", printk 168 arch/um/kernel/time.c printk(KERN_ERR "register_timer : request_irq failed - " printk 173 arch/um/kernel/time.c printk(KERN_ERR "creation of timer failed - errno = %d\n", -err); printk 179 arch/um/kernel/time.c printk(KERN_ERR "clocksource_register_hz returned %d\n", err); printk 58 arch/um/kernel/tlb.c printk(KERN_ERR "UML ran out of memory on the host side! " printk 109 arch/um/kernel/tlb.c printk(KERN_ERR "Unknown op type %d in do_ops\n", printk 328 arch/um/kernel/tlb.c printk(KERN_ERR "fix_range_common: failed, killing current " printk 489 arch/um/kernel/tlb.c printk(KERN_ERR "Failed to flush page for address 0x%lx\n", address); printk 153 arch/um/kernel/trap.c printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x", printk 160 arch/um/kernel/trap.c printk(KERN_CONT "\n"); printk 289 arch/um/kernel/trap.c printk(KERN_ERR "Bus error - the host /dev/shm or /tmp " printk 306 arch/um/kernel/trap.c printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n", printk 33 arch/um/os-Linux/drivers/ethertap_kern.c printk(KERN_INFO "ethertap backend - %s", epri->dev_name); printk 35 arch/um/os-Linux/drivers/ethertap_kern.c printk(KERN_CONT ", IP = %s", epri->gate_addr); printk 36 arch/um/os-Linux/drivers/ethertap_kern.c printk(KERN_CONT "\n"); printk 77 arch/um/os-Linux/drivers/ethertap_kern.c printk(KERN_ERR "ethertap_setup : Missing tap device name\n"); printk 48 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_change - request failed, err = %d\n", printk 55 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_change : Failed to allocate output " printk 59 arch/um/os-Linux/drivers/ethertap_user.c printk("%s", output); printk 126 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_tramp : read of status failed, " printk 131 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_tramp : uml_net failed\n"); printk 150 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_open - data socketpair failed - " printk 158 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_open - control socketpair failed - " printk 170 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_open : failed to allocate output " printk 173 arch/um/os-Linux/drivers/ethertap_user.c printk("%s", output); printk 178 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_tramp failed - err = %d\n", -err); printk 204 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_close - shutdown data socket failed, " printk 208 arch/um/os-Linux/drivers/ethertap_user.c printk(UM_KERN_ERR "etap_close - shutdown control socket " printk 32 arch/um/os-Linux/drivers/tuntap_kern.c printk(KERN_INFO "TUN/TAP backend - "); printk 34 arch/um/os-Linux/drivers/tuntap_kern.c printk(KERN_CONT "IP = %s", tpri->gate_addr); printk 35 arch/um/os-Linux/drivers/tuntap_kern.c printk(KERN_CONT "\n"); printk 105 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp : recvmsg failed - " printk 113 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp : didn't receive a " printk 119 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp : didn't receive a " printk 143 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "Failed to open /dev/net/tun, " printk 152 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "TUNSETIFF failed, errno = %d\n", printk 162 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open : socketpair failed - " printk 177 arch/um/os-Linux/drivers/tuntap_user.c printk("%s", output); printk 179 arch/um/os-Linux/drivers/tuntap_user.c printk(UM_KERN_ERR "tuntap_open_tramp failed - " printk 186 arch/um/os-Linux/drivers/tuntap_user.c printk("%s", output); printk 314 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't stat \"%s\" : err = %d\n", file, printk 326 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't open \"%s\", " printk 332 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't get the block size of " printk 352 arch/um/os-Linux/file.c printk(UM_KERN_ERR "Couldn't stat \"%s\" : err = %d\n", file, printk 394 arch/um/os-Linux/file.c printk(UM_KERN_ERR "os_pipe : Setting FD_CLOEXEC failed, err = %d\n", printk 412 arch/um/os-Linux/file.c printk(UM_KERN_ERR "os_set_fd_async : failed to set O_ASYNC " printk 420 arch/um/os-Linux/file.c printk(UM_KERN_ERR "os_set_fd_async : Failed to fcntl F_SETOWN " printk 528 arch/um/os-Linux/file.c printk(UM_KERN_ERR "rcv_fd didn't receive anything, " printk 534 arch/um/os-Linux/file.c printk(UM_KERN_ERR "rcv_fd didn't receive a descriptor\n"); printk 554 arch/um/os-Linux/file.c printk(UM_KERN_ERR "create_unix_socket : " printk 594 arch/um/os-Linux/file.c printk(UM_KERN_ERR "F_SETLK failed, file already locked by pid %d\n", printk 55 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : pipe failed, errno = %d\n", printk 62 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : setting FD_CLOEXEC failed, " printk 77 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : clone failed, errno = %d\n", printk 95 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper : read on pipe failed, " printk 127 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper_thread : clone failed, " printk 135 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper_thread - wait failed, " printk 140 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "run_helper_thread - thread " printk 155 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "helper_wait : waitpid process %d failed, " printk 159 arch/um/os-Linux/helper.c printk(UM_KERN_ERR "helper_wait : process %d exited with " printk 78 arch/um/os-Linux/irq.c printk( printk 103 arch/um/os-Linux/irq.c printk("epollctl add err fd %d, %s\n", fd, strerror(errno)); printk 119 arch/um/os-Linux/irq.c printk(UM_KERN_ERR printk 36 arch/um/os-Linux/process.c printk(UM_KERN_ERR "os_process_pc - couldn't open '%s', " printk 42 arch/um/os-Linux/process.c printk(UM_KERN_ERR "os_process_pc - couldn't read '%s', " printk 51 arch/um/os-Linux/process.c printk(UM_KERN_ERR "os_process_pc - couldn't find pc in '%s'\n", printk 71 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Couldn't open '%s', errno = %d\n", stat, printk 80 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Couldn't read '%s', errno = %d\n", stat, printk 88 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Failed to scan '%s'\n", data); printk 194 arch/um/os-Linux/process.c printk(UM_KERN_INFO "Checking host MADV_REMOVE support..."); printk 197 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Creating test memory file failed, " printk 205 arch/um/os-Linux/process.c printk(UM_KERN_ERR "Mapping test memory file failed, " printk 211 arch/um/os-Linux/process.c printk(UM_KERN_ERR "MADV_REMOVE failed, err = %d\n", -errno); printk 215 arch/um/os-Linux/process.c printk(UM_KERN_CONT "OK\n"); printk 65 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_thread : poll returned " printk 76 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR printk 94 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_thread : " printk 112 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "need_poll : failed to allocate new " printk 138 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "update_thread : write failed, err = %d\n", printk 145 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "update_thread : read failed, err = %d\n", printk 246 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "setup_initial_poll : failed to allocate " printk 274 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_workaround - os_pipe 1 failed, " printk 280 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "write_sigio_workaround - os_pipe 2 failed, " printk 348 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "maybe_sigio_broken - failed to add pollfd " printk 437 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio failed, errno = %d\n", printk 446 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio failed to allocate a " printk 454 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : raw failed, errno = %d\n", printk 461 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigio_async failed, " printk 467 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigaction 1 failed, " printk 475 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigaction 2 failed, " printk 487 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "check_one_sigio : sigaction 3 failed, " printk 496 arch/um/os-Linux/sigio.c printk(UM_KERN_INFO "Checking that host ptys support output SIGIO..."); printk 502 arch/um/os-Linux/sigio.c printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n", printk 509 arch/um/os-Linux/sigio.c printk(UM_KERN_CONT "Yes\n"); printk 512 arch/um/os-Linux/sigio.c printk(UM_KERN_CONT "No, enabling workaround\n"); printk 514 arch/um/os-Linux/sigio.c printk(UM_KERN_CONT "tty_output : read failed, err = %d\n", n); printk 519 arch/um/os-Linux/sigio.c printk(UM_KERN_INFO "Checking that host ptys support SIGIO on " printk 524 arch/um/os-Linux/sigio.c printk(UM_KERN_CONT "Yes\n"); printk 527 arch/um/os-Linux/sigio.c printk(UM_KERN_CONT "No, enabling workaround\n"); printk 534 arch/um/os-Linux/sigio.c printk(UM_KERN_WARNING "No pseudo-terminals available - " printk 58 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "Registers - \n"); printk 60 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "\t%d\t0x%lx\n", i, syscall_regs[i]); printk 82 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "do_syscall_stub : ret = %ld, offset = %ld, " printk 85 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR "do_syscall_stub: syscall %ld failed, " printk 88 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR " syscall parameters: " printk 94 arch/um/os-Linux/skas/mem.c printk(UM_KERN_ERR " additional syscall " printk 97 arch/um/os-Linux/skas/mem.c printk("\n" UM_KERN_ERR " "); printk 98 arch/um/os-Linux/skas/mem.c printk(" 0x%lx", data[n]); printk 101 arch/um/os-Linux/skas/mem.c printk("\n"); printk 39 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Stub registers -\n"); printk 41 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "\t%d - %lx\n", i, regs[i]); printk 69 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "wait_stub_done : continue failed, " printk 81 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to get registers from stub, " printk 83 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "wait_stub_done : failed to wait for SIGTRAP, " printk 97 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "save_fp_registers returned %d\n", printk 103 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to continue stub, pid = %d, " printk 117 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "put_fp_registers returned %d\n", printk 146 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "handle_trap - nullifying syscall " printk 153 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "handle_trap - continuing to end of " printk 163 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to get registers " printk 165 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "handle_trap - failed to wait at " printk 211 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "mapping mmap stub at 0x%lx failed, " printk 222 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "mapping segfault stack " printk 241 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace_tramp - setting SIGSEGV " printk 276 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : mmap failed, " printk 290 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : clone failed, " printk 299 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : wait failed, " printk 307 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : expected SIGSTOP, got " printk 315 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : PTRACE_OLDSETOPTIONS " printk 322 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "start_userspace : munmap failed, " printk 355 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - ptrace set regs " printk 361 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - ptrace set fp regs " printk 373 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - ptrace continue " printk 380 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - wait failed, " printk 387 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - PTRACE_GETREGS failed, " printk 393 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - get_fp_registers failed, " printk 433 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "userspace - child stopped " printk 488 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 : PTRACE_SETREGS " printk 495 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers " printk 510 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Failed to continue new process, pid = %d, " printk 519 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 - stub-parent reports " printk 530 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 - stub-child reports " printk 539 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "copy_context_skas0 : PTRACE_OLDSETOPTIONS " printk 608 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "Bad sigsetjmp return in " printk 615 arch/um/os-Linux/skas/process.c printk(UM_KERN_ERR "impossible long jump!"); printk 35 arch/um/os-Linux/tty.c printk(UM_KERN_ERR "get_pty : Couldn't open /dev/ptmx - " printk 45 arch/um/os-Linux/tty.c printk(UM_KERN_ERR "get_pty : Couldn't grant pty - " printk 52 arch/um/os-Linux/tty.c printk(UM_KERN_ERR "get_pty : Couldn't unlock pty - " printk 38 arch/um/os-Linux/umid.c printk(UM_KERN_ERR printk 54 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "%s : malloc failed, errno = %d\n", printk 61 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Failed to mkdir '%s': %s\n", printk 150 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used - pid filename too long\n"); printk 160 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't open pid " printk 169 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file " printk 173 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file " printk 180 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used : couldn't parse pid file " printk 186 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "umid \"%s\" is already in use by pid %d\n", printk 212 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "is_umdir_used - remove_files_and_dir " printk 232 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Open of machine pid file \"%s\" failed: " printk 240 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Write of pid file failed - err = %d\n", printk 276 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "make_umid - mkstemp(%s) failed: " printk 311 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Failed to create '%s' - err = %d\n", umid, printk 334 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "Failed to initialize umid \"%s\", trying with a " printk 354 arch/um/os-Linux/umid.c printk(UM_KERN_ERR "umid_file_name : buffer too short\n"); printk 219 arch/unicore32/kernel/clock.c printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name, printk 64 arch/unicore32/kernel/dma.c printk(KERN_WARNING "No more available DMA channels for %s\n", printk 79 arch/unicore32/kernel/dma.c printk(KERN_CRIT printk 112 arch/unicore32/kernel/dma.c printk(KERN_WARNING "spurious IRQ for" printk 140 arch/unicore32/kernel/dma.c printk(KERN_WARNING "spurious IRQ for" printk 165 arch/unicore32/kernel/dma.c printk(KERN_CRIT "Can't register IRQ for DMA\n"); printk 171 arch/unicore32/kernel/dma.c printk(KERN_CRIT "Can't register IRQ for DMAERR\n"); printk 112 arch/unicore32/kernel/fpu-ucf64.c printk(KERN_INFO "Enable UniCore-F64 support.\n"); printk 362 arch/unicore32/kernel/irq.c printk(KERN_WARNING "Bad IRQ%u\n", irq); printk 47 arch/unicore32/kernel/module.c printk(KERN_ERR "%s: bad relocation, " printk 57 arch/unicore32/kernel/module.c printk(KERN_ERR "%s: out of bounds relocation, " printk 86 arch/unicore32/kernel/module.c printk(KERN_ERR printk 100 arch/unicore32/kernel/module.c printk(KERN_ERR "%s: unknown relocation: %u\n", printk 71 arch/unicore32/kernel/pci.c printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n"); printk 246 arch/unicore32/kernel/pci.c printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", printk 359 arch/unicore32/kernel/pci.c printk(KERN_ERR "PCI: Device %s not available because" printk 376 arch/unicore32/kernel/pci.c printk("PCI: enabling device %s (%04x -> %04x)\n", printk 105 arch/unicore32/kernel/pm.c printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n"); printk 113 arch/unicore32/kernel/pm.c printk(KERN_ERR "failed to alloc memory for pm save\n"); printk 128 arch/unicore32/kernel/process.c printk(KERN_EMERG "Reboot failed -- System halted\n"); printk 138 arch/unicore32/kernel/process.c printk("PC is at %pS\n", (void *)instruction_pointer(regs)); printk 139 arch/unicore32/kernel/process.c printk("LR is at %pS\n", (void *)regs->UCreg_lr); printk 140 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n" printk 144 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r26: %08lx r25: %08lx r24: %08lx\n", printk 147 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r23: %08lx r22: %08lx r21: %08lx r20: %08lx\n", printk 150 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r19: %08lx r18: %08lx r17: %08lx r16: %08lx\n", printk 153 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r15: %08lx r14: %08lx r13: %08lx r12: %08lx\n", printk 156 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r11: %08lx r10: %08lx r9 : %08lx r8 : %08lx\n", printk 159 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", printk 162 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", printk 173 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "Flags: %s INTR o%s REAL o%s Mode %s Segment %s\n", printk 190 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf); printk 196 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "\n"); printk 197 arch/unicore32/kernel/process.c printk(KERN_DEFAULT "Pid: %d, comm: %20s\n", printk 133 arch/unicore32/kernel/puv3-nb0916.c printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n", printk 141 arch/unicore32/kernel/puv3-nb0916.c printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n", printk 90 arch/unicore32/kernel/setup.c printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n", printk 135 arch/unicore32/kernel/setup.c printk(KERN_CRIT "NR_BANKS too low, " printk 39 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", printk 42 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n", printk 79 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n", printk 98 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str); printk 133 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "%sCode: %s\n", lvl, str); printk 143 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "Backtrace: "); printk 160 arch/unicore32/kernel/traps.c printk("no frame pointer"); printk 163 arch/unicore32/kernel/traps.c printk("invalid frame pointer 0x%08x", fp); printk 166 arch/unicore32/kernel/traps.c printk("frame pointer underflow"); printk 167 arch/unicore32/kernel/traps.c printk("\n"); printk 186 arch/unicore32/kernel/traps.c printk(KERN_EMERG "Internal error: %s: %x [#%d]\n", printk 197 arch/unicore32/kernel/traps.c printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n", printk 263 arch/unicore32/kernel/traps.c printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason); printk 272 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val); printk 277 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val); printk 282 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val); printk 287 arch/unicore32/kernel/traps.c printk(KERN_DEFAULT "Division by zero in kernel.\n"); printk 317 arch/unicore32/mm/alignment.c printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, " printk 349 arch/unicore32/mm/alignment.c printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n"); printk 506 arch/unicore32/mm/alignment.c printk(KERN_ERR "Alignment trap: not handling instruction " printk 45 arch/unicore32/mm/fault.c printk(KERN_ALERT "pgd = %p\n", mm->pgd); printk 47 arch/unicore32/mm/fault.c printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); printk 57 arch/unicore32/mm/fault.c printk("(bad)"); printk 63 arch/unicore32/mm/fault.c printk(", *pmd=%08lx", pmd_val(*pmd)); printk 69 arch/unicore32/mm/fault.c printk("(bad)"); printk 78 arch/unicore32/mm/fault.c printk(", *pte=%08lx", pte_val(*pte)); printk 82 arch/unicore32/mm/fault.c printk("\n"); printk 101 arch/unicore32/mm/fault.c printk(KERN_ALERT printk 383 arch/unicore32/mm/fault.c printk("dabt exception but no error!\n"); printk 392 arch/unicore32/mm/fault.c printk(KERN_EMERG "r0 :%08x r1 :%08x\n", res1, res2); printk 464 arch/unicore32/mm/fault.c printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", printk 479 arch/unicore32/mm/fault.c printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n", printk 210 arch/unicore32/mm/mmu.c printk(KERN_WARNING "BUG: not creating mapping for " printk 218 arch/unicore32/mm/mmu.c printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " printk 230 arch/unicore32/mm/mmu.c printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " printk 261 arch/unicore32/mm/mmu.c printk(KERN_WARNING printk 268 arch/unicore32/mm/mmu.c printk(KERN_WARNING printk 430 arch/x86/crypto/blowfish_glue.c printk(KERN_INFO printk 1480 arch/x86/crypto/camellia_glue.c printk(KERN_INFO printk 205 arch/x86/crypto/serpent_sse2_glue.c printk(KERN_INFO "SSE2 instructions are not detected.\n"); printk 253 arch/x86/crypto/twofish_glue_3way.c printk(KERN_INFO printk 182 arch/x86/ia32/ia32_aout.c printk(KERN_NOTICE "executable not page aligned\n"); printk 188 arch/x86/ia32/ia32_aout.c printk(KERN_WARNING printk 281 arch/x86/ia32/ia32_aout.c printk(KERN_WARNING printk 38 arch/x86/include/asm/apic.h printk(s, ##a); \ printk 102 arch/x86/include/asm/floppy.h printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", printk 210 arch/x86/include/asm/floppy.h printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); printk 98 arch/x86/include/asm/gart.h printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n"); printk 102 arch/x86/include/asm/gart.h printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n"); printk 106 arch/x86/include/asm/gart.h printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n", printk 13 arch/x86/include/asm/pci_x86.h #define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__) printk 18 arch/x86/include/asm/pci_x86.h printk(fmt, ##__VA_ARGS__); \ printk 132 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "Unable to map MADT\n"); printk 139 arch/x86/kernel/acpi/boot.c printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", printk 163 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "skipped apicid that is too big\n"); printk 221 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); printk 308 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); printk 326 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); printk 516 arch/x86/kernel/acpi/boot.c printk(PREFIX "BIOS IRQ0 override ignored.\n"); printk 523 arch/x86/kernel/acpi/boot.c printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); printk 599 arch/x86/kernel/acpi/boot.c printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old); printk 872 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "HPET timers must be located in " printk 885 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX printk 898 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "HPET id: %#x " printk 905 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX printk 911 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", printk 999 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", printk 1026 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX printk 1059 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX printk 1068 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "No LAPIC entries present\n"); printk 1072 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); printk 1082 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); printk 1141 arch/x86/kernel/acpi/boot.c printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); printk 1181 arch/x86/kernel/acpi/boot.c printk(KERN_INFO PREFIX "Skipping IOAPIC probe " printk 1189 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); printk 1192 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); printk 1199 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX printk 1220 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); printk 1253 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX printk 1291 arch/x86/kernel/acpi/boot.c printk(KERN_ERR PREFIX printk 1302 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX printk 1313 arch/x86/kernel/acpi/boot.c printk(KERN_INFO "Using ACPI (MADT) for SMP configuration " printk 1316 arch/x86/kernel/acpi/boot.c printk(KERN_INFO "Using ACPI for processor (LAPIC) " printk 1325 arch/x86/kernel/acpi/boot.c printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", printk 1335 arch/x86/kernel/acpi/boot.c printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", printk 1345 arch/x86/kernel/acpi/boot.c printk(KERN_NOTICE "%s detected: acpi off\n", d->ident); printk 1348 arch/x86/kernel/acpi/boot.c printk(KERN_NOTICE printk 1568 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "acpi=force override\n"); printk 1570 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); printk 1688 arch/x86/kernel/acpi/boot.c printk(KERN_WARNING "MPS support code is not built-in.\n" printk 134 arch/x86/kernel/acpi/cstate.c printk(KERN_DEBUG printk 52 arch/x86/kernel/acpi/sleep.c printk(KERN_ERR "wakeup header does not match\n"); printk 56 arch/x86/kernel/alternative.c printk(KERN_DEBUG "%s: " fmt "\n", __func__, ##args); \ printk 67 arch/x86/kernel/alternative.c printk(KERN_DEBUG fmt, ##args); \ printk 69 arch/x86/kernel/alternative.c printk(KERN_CONT "%02hhx ", buf[j]); \ printk 70 arch/x86/kernel/alternative.c printk(KERN_CONT "%02hhx\n", buf[j]); \ printk 89 arch/x86/kernel/apb_timer.c printk(KERN_ERR "Failed to get MTMR %d from SFI\n", printk 95 arch/x86/kernel/apb_timer.c printk(KERN_WARNING "No timer base from SFI, use default\n"); printk 141 arch/x86/kernel/apb_timer.c printk(KERN_ERR "Failed to get MTMR %d from SFI\n", printk 156 arch/x86/kernel/apb_timer.c printk(KERN_DEBUG "%s clockevent registered as global\n", printk 195 arch/x86/kernel/apb_timer.c printk(KERN_INFO "Registering CPU %d clockevent device %s, cpu %08x\n", printk 317 arch/x86/kernel/apb_timer.c printk(KERN_INFO "apbt: disabled per cpu timer\n"); printk 336 arch/x86/kernel/apb_timer.c printk(KERN_ERR "Failed to get timer for cpu %d\n", i); printk 390 arch/x86/kernel/apb_timer.c printk(KERN_INFO printk 396 arch/x86/kernel/apb_timer.c printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz); printk 170 arch/x86/kernel/apic/apic_flat_64.c printk(KERN_DEBUG "system APIC only can use physical flat"); printk 175 arch/x86/kernel/apic/apic_flat_64.c printk(KERN_DEBUG "IBM Summit detected, will use apic physical"); printk 46 arch/x86/kernel/apic/bigsmp_32.c printk(KERN_INFO printk 89 arch/x86/kernel/apic/bigsmp_32.c printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident); printk 1240 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "IOAPIC %d:\n", apic); printk 1251 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "%s, remapped, I(%04X), Z(%X)\n", printk 1255 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "%s, %s, D(%02X), M(%1d)\n", printk 1280 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); printk 1281 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk 1282 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk 1283 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); printk 1284 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); printk 1286 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); printk 1287 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : max redirection entries: %02X\n", printk 1290 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); printk 1291 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : IO APIC version: %02X\n", printk 1300 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); printk 1301 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); printk 1311 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); printk 1312 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); printk 1315 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG ".... IRQ redirection table:\n"); printk 1324 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); printk 1326 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", printk 1334 arch/x86/kernel/apic/io_apic.c printk(KERN_INFO "testing the IO APIC.......................\n"); printk 1339 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "IRQ to pin mappings:\n"); printk 1354 arch/x86/kernel/apic/io_apic.c printk(KERN_DEBUG "IRQ%d ", irq); printk 1360 arch/x86/kernel/apic/io_apic.c printk(KERN_INFO ".................................... done.\n"); printk 1400 arch/x86/kernel/apic/io_apic.c printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); printk 1408 arch/x86/kernel/apic/io_apic.c printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); printk 1487 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", printk 1489 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", printk 1501 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", printk 1508 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", printk 2479 arch/x86/kernel/apic/io_apic.c printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " printk 2498 arch/x86/kernel/apic/io_apic.c printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " printk 2674 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR printk 2713 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR printk 2738 arch/x86/kernel/apic/io_apic.c printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); printk 26 arch/x86/kernel/apic/probe_32.c printk(KERN_INFO printk 192 arch/x86/kernel/apic/probe_32.c printk(KERN_INFO "Using APIC driver %s\n", apic->name); printk 208 arch/x86/kernel/apic/probe_32.c printk(KERN_INFO "Switched to APIC driver `%s'.\n", printk 1058 arch/x86/kernel/apic/vector.c printk(KERN_DEBUG); printk 24 arch/x86/kernel/apic/x2apic_phys.c printk(KERN_DEBUG "System requires x2apic physical mode\n"); printk 857 arch/x86/kernel/apm_32.c printk(KERN_DEBUG "apm_do_idle failed (%d)\n", err); printk 1329 arch/x86/kernel/apm_32.c printk(KERN_DEBUG "apm: received %s notify\n", printk 1332 arch/x86/kernel/apm_32.c printk(KERN_DEBUG "apm: received unknown " printk 1419 arch/x86/kernel/apm_32.c printk(KERN_DEBUG "apm: setting state busy\n"); printk 1752 arch/x86/kernel/apm_32.c printk(KERN_INFO "apm: Connection version %d.%d\n", printk 1783 arch/x86/kernel/apm_32.c printk(KERN_INFO "apm: power status not available\n"); printk 1816 arch/x86/kernel/apm_32.c printk(KERN_INFO printk 1820 arch/x86/kernel/apm_32.c printk("unknown\n"); printk 1822 arch/x86/kernel/apm_32.c printk("%d%%\n", cx & 0xff); printk 1824 arch/x86/kernel/apm_32.c printk(KERN_INFO printk 1828 arch/x86/kernel/apm_32.c printk("unknown\n"); printk 1830 arch/x86/kernel/apm_32.c printk("%d %s\n", dx & 0x7fff, printk 1925 arch/x86/kernel/apm_32.c printk("%s\n", d->ident); printk 1935 arch/x86/kernel/apm_32.c printk(KERN_INFO "%s machine detected. Mousepad Resume Bug " printk 1945 arch/x86/kernel/apm_32.c printk(KERN_INFO "%s bios detected. " printk 1956 arch/x86/kernel/apm_32.c printk(KERN_INFO "%s machine detected. " printk 1967 arch/x86/kernel/apm_32.c printk(KERN_INFO "%s machine detected. " printk 1977 arch/x86/kernel/apm_32.c printk(KERN_INFO "%s machine detected. " printk 1979 arch/x86/kernel/apm_32.c printk(KERN_INFO "This bug is fixed in bios P15 which is available for\n"); printk 1980 arch/x86/kernel/apm_32.c printk(KERN_INFO "download from support.intel.com\n"); printk 1990 arch/x86/kernel/apm_32.c printk(KERN_INFO "%s machine detected. " printk 2014 arch/x86/kernel/apm_32.c printk(KERN_WARNING "BIOS strings suggest APM bugs, " printk 2026 arch/x86/kernel/apm_32.c printk(KERN_WARNING "BIOS strings suggest APM reports battery life " printk 2260 arch/x86/kernel/apm_32.c printk(KERN_INFO "apm: BIOS not found.\n"); printk 2263 arch/x86/kernel/apm_32.c printk(KERN_INFO printk 2270 arch/x86/kernel/apm_32.c printk(KERN_INFO "apm: no 32 bit BIOS support\n"); printk 2296 arch/x86/kernel/apm_32.c printk(KERN_INFO "apm: entry %x:%x cseg16 %x dseg %x", printk 2300 arch/x86/kernel/apm_32.c printk(" cseg len %x, dseg len %x", printk 2304 arch/x86/kernel/apm_32.c printk(" cseg16 len %x", apm_info.bios.cseg_16_len); printk 2305 arch/x86/kernel/apm_32.c printk("\n"); printk 2361 arch/x86/kernel/apm_32.c printk(KERN_NOTICE printk 2372 arch/x86/kernel/apm_32.c printk(KERN_WARNING "apm: Could not register misc device.\n"); printk 45 arch/x86/kernel/bootflag.c printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n", printk 88 arch/x86/kernel/bootflag.c printk(KERN_WARNING "Simple Boot Flag value 0x%x read from " printk 154 arch/x86/kernel/cpuid.c printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n", printk 69 arch/x86/kernel/crash_dump_32.c printk(KERN_WARNING "Kdump: Kdump buffer page not" printk 89 arch/x86/kernel/crash_dump_32.c printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer" printk 256 arch/x86/kernel/devicetree.c printk(KERN_ERR "Can't obtain address from device node %pOF.\n", dn); printk 273 arch/x86/kernel/devicetree.c printk(KERN_ERR "Error: No information about IO-APIC in OF.\n"); printk 29 arch/x86/kernel/doublefault.c printk(KERN_EMERG "PANIC: double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); printk 34 arch/x86/kernel/doublefault.c printk(KERN_EMERG "double fault, tss at %08lx\n", tss); printk 39 arch/x86/kernel/doublefault.c printk(KERN_EMERG "eip = %08lx, esp = %08lx\n", printk 42 arch/x86/kernel/doublefault.c printk(KERN_EMERG "eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n", printk 44 arch/x86/kernel/doublefault.c printk(KERN_EMERG "esi = %08lx, edi = %08lx\n", printk 71 arch/x86/kernel/dumpstack.c printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address); printk 111 arch/x86/kernel/dumpstack.c printk("%sCode: Bad RIP value.\n", loglvl); printk 113 arch/x86/kernel/dumpstack.c printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %" printk 122 arch/x86/kernel/dumpstack.c printk("%sEIP: %pS\n", loglvl, (void *)regs->ip); printk 124 arch/x86/kernel/dumpstack.c printk("%sRIP: %04x:%pS\n", loglvl, (int)regs->cs, (void *)regs->ip); printk 132 arch/x86/kernel/dumpstack.c printk(KERN_DEFAULT "RSP: %04x:%016lx EFLAGS: %08lx", (int)regs->ss, printk 171 arch/x86/kernel/dumpstack.c printk("%sCall Trace:\n", log_lvl); printk 210 arch/x86/kernel/dumpstack.c printk("%s <%s>\n", log_lvl, stack_name); printk 278 arch/x86/kernel/dumpstack.c printk("%s </%s>\n", log_lvl, stack_name); printk 379 arch/x86/kernel/dumpstack.c printk(KERN_DEFAULT printk 460 arch/x86/kernel/e820.c printk(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx] ", start, end - 1); printk 536 arch/x86/kernel/e820.c printk(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx] ", start, end - 1); printk 1203 arch/x86/kernel/e820.c printk(KERN_DEBUG "e820: reserve RAM buffer [mem %#010llx-%#010llx]\n", start, end); printk 42 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Detected use of extended apic ids " printk 45 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Enabling hypertransport extended " printk 47 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Note this is a bios bug, " printk 62 arch/x86/kernel/early-quirks.c printk(KERN_INFO printk 103 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Nvidia board " printk 106 arch/x86/kernel/early-quirks.c printk(KERN_INFO "If you got timer trouble " printk 153 arch/x86/kernel/early-quirks.c printk(KERN_INFO "SB4X0 revision 0x%x\n", d); printk 154 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Ignoring ACPI timer override.\n"); printk 155 arch/x86/kernel/early-quirks.c printk(KERN_INFO "If you got timer trouble " printk 195 arch/x86/kernel/early-quirks.c printk(KERN_INFO "SB600 revision 0x%x\n", rev); printk 196 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Ignoring ACPI timer override.\n"); printk 197 arch/x86/kernel/early-quirks.c printk(KERN_INFO "If you got timer trouble " printk 576 arch/x86/kernel/early-quirks.c printk(KERN_INFO "Reserving Intel graphics memory at %pR\n", printk 333 arch/x86/kernel/early_printk.c printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n", printk 210 arch/x86/kernel/i8259.c printk(KERN_DEBUG printk 319 arch/x86/kernel/i8259.c printk(KERN_INFO "Using NULL legacy PIC\n"); printk 43 arch/x86/kernel/irq_32.c printk(KERN_WARNING "low stack detected by irq handler\n"); printk 287 arch/x86/kernel/kgdb.c printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr); printk 314 arch/x86/kernel/kgdb.c printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n", printk 481 arch/x86/kernel/kgdb.c printk(KERN_ERR "KGDB: trap/step from kernel to user space, " printk 658 arch/x86/kernel/kgdb.c printk(KERN_ERR "kgdb: Could not allocate hw" printk 324 arch/x86/kernel/kvm.c printk(KERN_INFO"KVM setup async PF for cpu %d\n", printk 350 arch/x86/kernel/kvm.c printk(KERN_INFO"Unregister pv shared memory for cpu %d\n", printk 209 arch/x86/kernel/mmconf-fam10h_64.c printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); printk 30 arch/x86/kernel/module.c printk(KERN_DEBUG fmt, ##__VA_ARGS__) printk 35 arch/x86/kernel/module.c printk(KERN_DEBUG fmt, ##__VA_ARGS__); \ printk 123 arch/x86/kernel/nmi_selftest.c printk(KERN_CONT "FAILED |"); printk 125 arch/x86/kernel/nmi_selftest.c printk(KERN_CONT "TIMEOUT|"); printk 127 arch/x86/kernel/nmi_selftest.c printk(KERN_CONT "ERROR |"); printk 131 arch/x86/kernel/nmi_selftest.c printk(KERN_CONT " ok |"); printk 140 arch/x86/kernel/nmi_selftest.c printk("%12s:", testname); printk 150 arch/x86/kernel/nmi_selftest.c printk("----------------\n"); printk 151 arch/x86/kernel/nmi_selftest.c printk("| NMI testsuite:\n"); printk 152 arch/x86/kernel/nmi_selftest.c printk("--------------------\n"); printk 156 arch/x86/kernel/nmi_selftest.c printk(KERN_CONT "\n"); printk 159 arch/x86/kernel/nmi_selftest.c printk(KERN_CONT "\n"); printk 164 arch/x86/kernel/nmi_selftest.c printk("--------------------\n"); printk 165 arch/x86/kernel/nmi_selftest.c printk("BUG: %3d unexpected failures (out of %3d) - debugging disabled! |\n", printk 167 arch/x86/kernel/nmi_selftest.c printk("-----------------------------------------------------------------\n"); printk 169 arch/x86/kernel/nmi_selftest.c printk("--------------------\n"); printk 170 arch/x86/kernel/nmi_selftest.c printk("%3d out of %3d testcases failed, as expected. |\n", printk 172 arch/x86/kernel/nmi_selftest.c printk("----------------------------------------------------\n"); printk 174 arch/x86/kernel/nmi_selftest.c printk("--------------------\n"); printk 175 arch/x86/kernel/nmi_selftest.c printk("All %3d testcases failed, as expected. |\n", printk 177 arch/x86/kernel/nmi_selftest.c printk("----------------------------------------\n"); printk 179 arch/x86/kernel/nmi_selftest.c printk("--------------------\n"); printk 180 arch/x86/kernel/nmi_selftest.c printk("Good, all %3d testcases passed! |\n", printk 182 arch/x86/kernel/nmi_selftest.c printk("---------------------------------\n"); printk 49 arch/x86/kernel/paravirt.c printk(KERN_INFO "Booting paravirtualized kernel on %s\n", printk 574 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "Calgary: CalIOC2 bus 0x%x entering tce cache blast " printk 580 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "1a. read 0x%x [LE] from %p\n", val, target); printk 582 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "1b. writing 0x%x [LE] to %p\n", val, target); printk 586 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "2a. starting to poll split queues\n"); printk 598 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "3. read 0x%x [LE] from %p\n", val, target); printk 612 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "5a. slamming into HardStop by reading %p\n", target); printk 614 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "5b. read 0x%x [LE] from %p\n", val, target); printk 617 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "5c. read 0x%x [LE] from %p (debug)\n", val, target); printk 620 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "6. invalidating TCE cache\n"); printk 625 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "7a. Re-reading PMCR\n"); printk 628 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "7b. read 0x%x [LE] from %p\n", val, target); printk 631 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "8a. removing HardStop from PMCR\n"); printk 634 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "8b. writing 0x%x [LE] to %p\n", val, target); printk 637 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "8c. read 0x%x [LE] from %p\n", val, target); printk 870 arch/x86/kernel/pci-calgary_64.c printk(KERN_EMERG "Calgary: 0x%08x@0x%x\n", rcstat, printk 982 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "Calgary: enabling translation on %s PHB %#x\n", printk 985 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "Calgary: errant DMAs will now be prevented on this " printk 1012 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "Calgary: disabling translation on PHB %#x!\n", busnum); printk 1046 arch/x86/kernel/pci-calgary_64.c printk(KERN_WARNING "Calgary: IEEEE, dev %p has " printk 1226 arch/x86/kernel/pci-calgary_64.c printk(KERN_WARNING printk 1243 arch/x86/kernel/pci-calgary_64.c printk(KERN_WARNING printk 1341 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n"); printk 1345 arch/x86/kernel/pci-calgary_64.c printk(KERN_ERR "PCI-DMA: Calgary init failed %d, " printk 1375 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n"); printk 1397 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table " printk 1404 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret); printk 1440 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "Calgary: finished detection, Calgary %s\n", printk 1446 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n"); printk 1447 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d\n", printk 1506 arch/x86/kernel/pci-calgary_64.c printk(KERN_INFO "Calgary: disabling " printk 1557 arch/x86/kernel/pci-calgary_64.c printk(KERN_DEBUG "Calgary: fixing up tce spaces\n"); printk 60 arch/x86/kernel/pci-iommu_table.c printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %pS depends on %pS and vice-versa. BREAKING IT.\n", printk 70 arch/x86/kernel/pci-iommu_table.c printk(KERN_ERR "EXECUTION ORDER INVALID! %pS should be called before %pS!\n", printk 74 arch/x86/kernel/pci-swiotlb.c printk(KERN_INFO "PCI-DMA: " printk 74 arch/x86/kernel/process_32.c printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", printk 76 arch/x86/kernel/process_32.c printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", printk 78 arch/x86/kernel/process_32.c printk(KERN_DEFAULT "DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n", printk 88 arch/x86/kernel/process_32.c printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", printk 103 arch/x86/kernel/process_32.c printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", printk 105 arch/x86/kernel/process_32.c printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n", printk 81 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n", printk 83 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n", printk 85 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n", printk 87 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n", printk 89 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n", printk 98 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "FS: %016lx GS: %016lx\n", printk 117 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", printk 119 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "CS: %04lx DS: %04x ES: %04x CR0: %016lx\n", regs->cs, ds, printk 121 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, printk 134 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", printk 136 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", printk 141 arch/x86/kernel/process_64.c printk(KERN_DEFAULT "PKRU: %08x\n", read_pkru()); printk 92 arch/x86/kernel/quirks.c printk(KERN_DEBUG "Force enabled HPET at resume\n"); printk 181 arch/x86/kernel/quirks.c printk(KERN_INFO "HPET not enabled in BIOS. " printk 202 arch/x86/kernel/quirks.c printk(KERN_DEBUG "Force enabled HPET at resume\n"); printk 294 arch/x86/kernel/quirks.c printk(KERN_DEBUG "Force enabled HPET at resume\n"); printk 353 arch/x86/kernel/quirks.c printk(KERN_DEBUG "Force enabled HPET at resume\n"); printk 427 arch/x86/kernel/quirks.c printk(KERN_DEBUG "Force enabled HPET at resume\n"); printk 52 arch/x86/kernel/rtc.c printk(KERN_ERR "%s: RTC write failed with error %d\n", printk 55 arch/x86/kernel/rtc.c printk(KERN_ERR printk 331 arch/x86/kernel/setup.c printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n", printk 336 arch/x86/kernel/setup.c printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to" printk 375 arch/x86/kernel/setup.c printk(KERN_INFO "RAMDISK: [mem %#010llx-%#010llx]\n", ramdisk_image, printk 705 arch/x86/kernel/setup.c printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n"); printk 715 arch/x86/kernel/setup.c printk(KERN_WARNING "failed to reserve 0x%08lx\n", printk 885 arch/x86/kernel/setup.c printk(KERN_INFO "Command line: %s\n", boot_command_line); printk 1053 arch/x86/kernel/setup.c printk(KERN_INFO "fixed physical RAM map:\n"); printk 1145 arch/x86/kernel/setup.c printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n", printk 851 arch/x86/kernel/signal.c printk("%s" printk 915 arch/x86/kernel/smpboot.c printk(KERN_INFO "x86: Booting SMP configuration:\n"); printk 923 arch/x86/kernel/smpboot.c printk(KERN_INFO ".... node %*s#%d, CPUs: ", printk 169 arch/x86/kernel/sysfb_efi.c printk(KERN_INFO "efifb: dmi detected %s - framebuffer at 0x%08x " printk 77 arch/x86/kernel/sysfb_simplefb.c printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n"); printk 94 arch/x86/kernel/sysfb_simplefb.c printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n"); printk 103 arch/x86/kernel/tce_64.c printk(KERN_ERR "Calgary: cannot allocate bitmap\n"); printk 128 arch/x86/kernel/tce_64.c printk(KERN_ERR "Calgary: dev %p has sysdata->iommu %p\n", printk 135 arch/x86/kernel/tce_64.c printk(KERN_ERR "Calgary: error allocating iommu_table\n"); printk 304 arch/x86/kernel/traps.c printk(KERN_EMERG "BUG: stack guard page was hit at %p (stack is %p..%p)\n", printk 130 arch/x86/kernel/umip.c printk("%s" pr_fmt("%s[%d] ip:%lx sp:%lx: %pV"), log_level, tsk->comm, printk 37 arch/x86/kernel/vsmp_64.c printk(KERN_INFO "vSMP CTL: capabilities:0x%08x control:0x%08x\n", printk 178 arch/x86/kvm/cpuid.c printk(KERN_INFO "kvm: guest NX capability removed\n"); printk 538 arch/x86/kvm/ioapic.c printk(KERN_WARNING "ioapic: wrong length %d\n", len); printk 565 arch/x86/kvm/ioapic.c printk(KERN_WARNING "ioapic: Unsupported size %d\n", len); printk 100 arch/x86/kvm/ioapic.h printk(KERN_EMERG "assertion failed %s: %d: %s\n", \ printk 57 arch/x86/kvm/irq_comm.c printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n"); printk 198 arch/x86/kvm/irq_comm.c printk(KERN_WARNING "kvm: exhaust allocatable IRQ sources!\n"); printk 220 arch/x86/kvm/irq_comm.c printk(KERN_ERR "kvm: IRQ source ID out of range!\n"); printk 641 arch/x86/kvm/lapic.c printk(KERN_WARNING "Can't read EOI MSR value: 0x%llx\n", printk 651 arch/x86/kvm/lapic.c printk(KERN_WARNING "Can't set EOI MSR value: 0x%llx\n", printk 661 arch/x86/kvm/lapic.c printk(KERN_WARNING "Can't clear EOI MSR value: 0x%llx\n", printk 848 arch/x86/kvm/lapic.c printk(KERN_INFO printk 1119 arch/x86/kvm/lapic.c printk(KERN_ERR "TODO: unsupported delivery mode %x\n", printk 1349 arch/x86/kvm/lapic.c printk(KERN_ERR "Local APIC read with len = %x, " printk 2295 arch/x86/kvm/lapic.c printk(KERN_ERR "malloc apic regs error for vcpu %x\n", printk 104 arch/x86/kvm/mmu.c #define pgprintk(x...) do { if (dbg) printk(x); } while (0) printk 105 arch/x86/kvm/mmu.c #define rmap_printk(x...) do { if (dbg) printk(x); } while (0) printk 2120 arch/x86/kvm/mmu.c printk(KERN_ERR "%s: %p %llx\n", __func__, printk 29 arch/x86/kvm/mmu_audit.c printk(KERN_ERR "audit: (%s) error: " \ printk 891 arch/x86/kvm/svm.c printk(KERN_INFO "has_svm: %s\n", msg); printk 1380 arch/x86/kvm/svm.c printk(KERN_INFO "kvm: Nested Virtualization enabled\n"); printk 1407 arch/x86/kvm/svm.c printk(KERN_INFO "kvm: Nested Paging disabled\n"); printk 1412 arch/x86/kvm/svm.c printk(KERN_INFO "kvm: Nested Paging enabled\n"); printk 2202 arch/x86/kvm/svm.c printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n"); printk 2210 arch/x86/kvm/svm.c printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n"); printk 5029 arch/x86/kvm/svm.c printk(KERN_ERR "%s: unexpected exit_int_info 0x%x " printk 2202 arch/x86/kvm/vmx/vmx.c printk(KERN_WARNING "kvm: disable TXT in the BIOS or " printk 5923 arch/x86/kvm/vmx/vmx.c printk(KERN_WARNING "%s: Breaking out of NMI-blocked " printk 6691 arch/x86/kvm/vmx/vmx.c printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n"); printk 6699 arch/x86/kvm/vmx/vmx.c printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n"); printk 6856 arch/x86/kvm/vmx/vmx.c printk(KERN_ERR "kvm: CPU %d feature inconsistency!\n", printk 7510 arch/x86/kvm/vmx/vmx.c printk(KERN_INFO printk 7531 arch/x86/kvm/vmx/vmx.c printk(KERN_INFO "%s: failed to update PI IRTE\n", printk 274 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: invalid MSR slot!"); printk 7247 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: already loaded the other module\n"); printk 7253 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: no hardware support\n"); printk 7258 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: disabled by bios\n"); printk 7269 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: inadequate fpu\n"); printk 7279 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: failed to allocate cache for x86 fpu\n"); printk 7285 arch/x86/kvm/x86.c printk(KERN_ERR "kvm: failed to allocate percpu kvm_shared_msrs\n"); printk 10335 arch/x86/kvm/x86.c printk(KERN_INFO "irq bypass consumer (token %p) unregistration" printk 45 arch/x86/math-emu/errors.c printk("Unimplemented FPU Opcode at eip=%p : ", (void __user *)address); printk 51 arch/x86/math-emu/errors.c printk("[%02x]", byte1); printk 54 arch/x86/math-emu/errors.c printk("%02x ", byte1); printk 58 arch/x86/math-emu/errors.c printk("%02x (%02x+%d)\n", FPU_modrm, FPU_modrm & 0xf8, printk 61 arch/x86/math-emu/errors.c printk("/%d\n", (FPU_modrm >> 3) & 7); printk 63 arch/x86/math-emu/errors.c printk("cs selector = %04x\n", FPU_CS); printk 93 arch/x86/math-emu/errors.c printk("At %p:", (void *)address); printk 99 arch/x86/math-emu/errors.c printk(" %02x", byte1); printk 102 arch/x86/math-emu/errors.c printk(" [%02x]", byte1); printk 106 arch/x86/math-emu/errors.c printk(" [more..]\n"); printk 111 arch/x86/math-emu/errors.c printk(" %02x (%02x+%d)\n", FPU_modrm, printk 114 arch/x86/math-emu/errors.c printk(" /%d, mod=%d rm=%d\n", printk 119 arch/x86/math-emu/errors.c printk("%04x\n", FPU_CS); printk 126 arch/x86/math-emu/errors.c printk("SW: backward compatibility\n"); printk 128 arch/x86/math-emu/errors.c printk("SW: condition bit 3\n"); printk 130 arch/x86/math-emu/errors.c printk("SW: condition bit 2\n"); printk 132 arch/x86/math-emu/errors.c printk("SW: condition bit 1\n"); printk 134 arch/x86/math-emu/errors.c printk("SW: condition bit 0\n"); printk 136 arch/x86/math-emu/errors.c printk("SW: exception summary\n"); printk 138 arch/x86/math-emu/errors.c printk("SW: stack fault\n"); printk 140 arch/x86/math-emu/errors.c printk("SW: loss of precision\n"); printk 142 arch/x86/math-emu/errors.c printk("SW: underflow\n"); printk 144 arch/x86/math-emu/errors.c printk("SW: overflow\n"); printk 146 arch/x86/math-emu/errors.c printk("SW: divide by zero\n"); printk 148 arch/x86/math-emu/errors.c printk("SW: denormalized operand\n"); printk 150 arch/x86/math-emu/errors.c printk("SW: invalid operation\n"); printk 153 arch/x86/math-emu/errors.c printk(" SW: b=%d st=%d es=%d sf=%d cc=%d%d%d%d ef=%d%d%d%d%d%d\n", partial_status & 0x8000 ? 1 : 0, /* busy */ printk 166 arch/x86/math-emu/errors.c printk(" CW: ic=%d rc=%d%d pc=%d%d iem=%d ef=%d%d%d%d%d%d\n", printk 191 arch/x86/math-emu/errors.c printk("st(%d) %c .%04lx %04lx %04lx %04lx e%+-6d ", i, printk 200 arch/x86/math-emu/errors.c printk("Whoops! Error in errors.c: tag%d is %d ", i, printk 204 arch/x86/math-emu/errors.c printk("%s\n", tag_desc[(int)(unsigned)tagi]); printk 343 arch/x86/math-emu/errors.c printk("FP Exception: %s!\n", exception_names[i].name); printk 346 arch/x86/math-emu/errors.c printk("FPU emulator: Unknown Exception: 0x%04x!\n", n); printk 349 arch/x86/math-emu/errors.c printk("FPU emulator: Internal error type 0x%04x\n", printk 43 arch/x86/math-emu/exception.h #define EXCEPTION(x) { printk("exception in %s at line %d\n", \ printk 119 arch/x86/math-emu/fpu_entry.c printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n"); printk 136 arch/x86/math-emu/fpu_entry.c printk("math_emulate: %04x:%08lx\n", FPU_CS, FPU_EIP); printk 143 arch/x86/math-emu/fpu_entry.c printk("FPU emulator: Unsupported addressing mode\n"); printk 169 arch/x86/math-emu/fpu_entry.c printk printk 630 arch/x86/math-emu/fpu_entry.c printk("ERROR: wm-FPU-emu math_abort failed!\n"); printk 159 arch/x86/mm/dump_pagetables.c printk(KERN_INFO fmt, ##args); \ printk 168 arch/x86/mm/dump_pagetables.c printk(KERN_CONT fmt, ##args); \ printk 213 arch/x86/mm/extable.c printk(KERN_CRIT "PNPBIOS fault.. attempting recovery.\n"); printk 696 arch/x86/mm/fault.c printk(KERN_ALERT "%s: Corrupted page table at address %lx\n", printk 839 arch/x86/mm/fault.c printk(KERN_EMERG "Thread overran stack, or stack corrupted\n"); printk 846 arch/x86/mm/fault.c printk(KERN_DEFAULT "CR2: %016lx\n", address); printk 867 arch/x86/mm/fault.c printk("%s%s[%d]: segfault at %lx ip %px sp %px error %lx", printk 873 arch/x86/mm/fault.c printk(KERN_CONT "\n"); printk 128 arch/x86/mm/highmem_32.c printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n", printk 198 arch/x86/mm/hugetlbpage.c printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n", printk 124 arch/x86/mm/init.c printk(KERN_DEBUG "BRK [%#010lx, %#010lx] PGTABLE\n", printk 206 arch/x86/mm/init.c printk(KERN_INFO "Using GB pages for direct mapping\n"); printk 512 arch/x86/mm/init_32.c printk(KERN_DEBUG "clearing pte for ram above max_low_pfn: pfn: %lx pmd: %p pmd phys: %lx pte: %p pte phys: %lx\n", printk 607 arch/x86/mm/init_32.c printk(KERN_ERR MSG_HIGHMEM_TOO_BIG, printk 613 arch/x86/mm/init_32.c printk(KERN_ERR MSG_LOWMEM_TOO_SMALL, printk 621 arch/x86/mm/init_32.c printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n"); printk 645 arch/x86/mm/init_32.c printk(KERN_WARNING MSG_HIGHMEM_TOO_SMALL, printk 652 arch/x86/mm/init_32.c printk(KERN_WARNING "Warning only %ldMB will be used.\n", MAXMEM>>20); printk 654 arch/x86/mm/init_32.c printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n"); printk 656 arch/x86/mm/init_32.c printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); printk 662 arch/x86/mm/init_32.c printk(KERN_WARNING MSG_HIGHMEM_TRIMMED); printk 688 arch/x86/mm/init_32.c printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", printk 703 arch/x86/mm/init_32.c printk(KERN_NOTICE "%ldMB LOWMEM available.\n", printk 712 arch/x86/mm/init_32.c printk(KERN_INFO " mapped low ram: 0 - %08lx\n", printk 714 arch/x86/mm/init_32.c printk(KERN_INFO " low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT); printk 751 arch/x86/mm/init_32.c printk(KERN_INFO "Checking if this processor honours the WP bit even in supervisor mode..."); printk 757 arch/x86/mm/init_32.c printk(KERN_CONT "Ok.\n"); printk 761 arch/x86/mm/init_32.c printk(KERN_CONT "No.\n"); printk 790 arch/x86/mm/init_32.c printk(KERN_INFO "virtual kernel memory layout:\n" printk 916 arch/x86/mm/init_32.c printk(KERN_INFO "NX-protecting the kernel data: %luk\n", size >> 10); printk 249 arch/x86/mm/init_64.c printk(KERN_ERR "PAGETABLE BUG #00! %p <-> %p\n", printk 261 arch/x86/mm/init_64.c printk(KERN_ERR "PAGETABLE BUG #01! %p <-> %p\n", printk 273 arch/x86/mm/init_64.c printk(KERN_ERR "PAGETABLE BUG #02! %p <-> %p\n", printk 285 arch/x86/mm/init_64.c printk(KERN_ERR "PAGETABLE BUG #03!\n"); printk 328 arch/x86/mm/init_64.c printk(KERN_ERR printk 1306 arch/x86/mm/init_64.c printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n", printk 1328 arch/x86/mm/init_64.c printk(KERN_INFO "Testing CPA: undo %lx-%lx\n", start, end); printk 1331 arch/x86/mm/init_64.c printk(KERN_INFO "Testing CPA: again\n"); printk 196 arch/x86/mm/ioremap.c printk(KERN_WARNING "ioremap: invalid physical address %llx\n", printk 223 arch/x86/mm/ioremap.c printk(KERN_ERR "ioremap reserve_memtype failed %d\n", retval); printk 229 arch/x86/mm/ioremap.c printk(KERN_ERR printk 470 arch/x86/mm/ioremap.c printk(KERN_ERR "iounmap: bad address %p\n", addr); printk 849 arch/x86/mm/ioremap.c printk(KERN_WARNING "pmd %p != %p\n", printk 851 arch/x86/mm/ioremap.c printk(KERN_WARNING "fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n", printk 853 arch/x86/mm/ioremap.c printk(KERN_WARNING "fix_to_virt(FIX_BTMAP_END): %08lx\n", printk 856 arch/x86/mm/ioremap.c printk(KERN_WARNING "FIX_BTMAP_END: %d\n", FIX_BTMAP_END); printk 857 arch/x86/mm/ioremap.c printk(KERN_WARNING "FIX_BTMAP_BEGIN: %d\n", printk 92 arch/x86/mm/numa.c printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu); printk 208 arch/x86/mm/numa.c printk(KERN_INFO "NODE_DATA(%d) allocated [mem %#010Lx-%#010Lx]\n", nid, printk 212 arch/x86/mm/numa.c printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nid, tnid); printk 295 arch/x86/mm/numa.c printk(KERN_INFO "NUMA: Node %d [mem %#010Lx-%#010Lx] + [mem %#010Lx-%#010Lx] -> [mem %#010Lx-%#010Lx]\n", printk 378 arch/x86/mm/numa.c printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt); printk 455 arch/x86/mm/numa.c printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n", printk 560 arch/x86/mm/numa.c printk(KERN_WARNING "Node alignment %LuMB < min %LuMB, rejecting NUMA config\n", printk 687 arch/x86/mm/numa.c printk(KERN_INFO "%s\n", printk 689 arch/x86/mm/numa.c printk(KERN_INFO "Faking a node at [mem %#018Lx-%#018Lx]\n", printk 789 arch/x86/mm/numa.c printk(KERN_WARNING printk 808 arch/x86/mm/numa.c printk(KERN_WARNING printk 836 arch/x86/mm/numa.c printk(KERN_DEBUG "%s cpu %d node %d: mask now %*pbl\n", printk 865 arch/x86/mm/numa.c printk(KERN_WARNING printk 872 arch/x86/mm/numa.c printk(KERN_WARNING printk 50 arch/x86/mm/numa_32.c printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n", printk 52 arch/x86/mm/numa_32.c printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid); printk 53 arch/x86/mm/numa_32.c printk(KERN_DEBUG " "); printk 58 arch/x86/mm/numa_32.c printk(KERN_CONT "%lx ", pfn); printk 60 arch/x86/mm/numa_32.c printk(KERN_CONT "\n"); printk 74 arch/x86/mm/numa_32.c printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", printk 80 arch/x86/mm/numa_32.c printk(KERN_NOTICE "%ldMB LOWMEM available.\n", printk 82 arch/x86/mm/numa_32.c printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n", printk 85 arch/x86/mm/numa_32.c printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n", printk 88 arch/x86/mm/numa_32.c printk(KERN_DEBUG "High memory starts at vaddr %08lx\n", printk 71 arch/x86/mm/numa_emulation.c printk(KERN_INFO "Faking node %d at [mem %#018Lx-%#018Lx] (%LuMB)\n", printk 75 arch/x86/mm/pageattr-test.c printk(KERN_ERR printk 95 arch/x86/mm/pageattr-test.c printk(KERN_INFO printk 104 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA max_pfn_mapped %lu but expected %lu\n", printk 129 arch/x86/mm/pageattr-test.c printk(KERN_INFO "CPA self-test:\n"); printk 133 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA Cannot vmalloc bitmap\n"); printk 197 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA %d failed %d\n", i, err); printk 203 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA %lx: bad pte %Lx\n", addr[i], printk 208 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA %lx: unexpected level %d\n", printk 223 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA lookup of %lx failed\n", addr[i]); printk 229 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA reverting failed: %d\n", err); printk 234 arch/x86/mm/pageattr-test.c printk(KERN_ERR "CPA %lx: bad pte after revert %Lx\n", printk 248 arch/x86/mm/pageattr-test.c printk(KERN_INFO "ok.\n"); printk 167 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); printk 198 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); printk 327 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); printk 388 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); printk 413 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " printk 441 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); printk 464 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " printk 490 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: not a memory access instruction " printk 511 arch/x86/mm/pf_in.c printk(KERN_ERR "mmiotrace: Error: width.\n"); printk 618 arch/x86/mm/pgtable.c printk(KERN_INFO "Reserving virtual address space above 0x%08lx (rounded to 0x%08lx)\n", printk 639 arch/x86/mm/pti.c printk(KERN_WARNING "\n"); printk 640 arch/x86/mm/pti.c printk(KERN_WARNING "************************************************************\n"); printk 641 arch/x86/mm/pti.c printk(KERN_WARNING "** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **\n"); printk 642 arch/x86/mm/pti.c printk(KERN_WARNING "** **\n"); printk 643 arch/x86/mm/pti.c printk(KERN_WARNING "** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **\n"); printk 644 arch/x86/mm/pti.c printk(KERN_WARNING "** Your performance will increase dramatically if you **\n"); printk 645 arch/x86/mm/pti.c printk(KERN_WARNING "** switch to a 64-bit kernel! **\n"); printk 646 arch/x86/mm/pti.c printk(KERN_WARNING "** **\n"); printk 647 arch/x86/mm/pti.c printk(KERN_WARNING "** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **\n"); printk 648 arch/x86/mm/pti.c printk(KERN_WARNING "************************************************************\n"); printk 45 arch/x86/mm/setup_nx.c printk(KERN_NOTICE "Notice: NX (Execute Disable) protection " printk 50 arch/x86/mm/setup_nx.c printk(KERN_INFO "NX (Execute Disable) protection: " printk 53 arch/x86/mm/setup_nx.c printk(KERN_INFO "NX (Execute Disable) protection: " printk 58 arch/x86/mm/setup_nx.c printk(KERN_NOTICE "Notice: NX (Execute Disable) protection " printk 44 arch/x86/mm/srat.c printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n", printk 50 arch/x86/mm/srat.c printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); printk 56 arch/x86/mm/srat.c printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); printk 61 arch/x86/mm/srat.c printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", printk 85 arch/x86/mm/srat.c printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); printk 96 arch/x86/mm/srat.c printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); printk 102 arch/x86/mm/srat.c printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", printk 582 arch/x86/oprofile/nmi_int.c printk(KERN_INFO "oprofile: P4 HyperThreading detected with > 2 threads\n"); printk 583 arch/x86/oprofile/nmi_int.c printk(KERN_INFO "oprofile: Reverting to timer mode.\n"); printk 599 arch/x86/oprofile/nmi_int.c printk(KERN_INFO "oprofile: forcing NMI timer mode\n"); printk 602 arch/x86/oprofile/nmi_int.c printk(KERN_INFO "oprofile: forcing architectural perfmon\n"); printk 773 arch/x86/oprofile/nmi_int.c printk(KERN_INFO "oprofile: using NMI interrupt.\n"); printk 453 arch/x86/oprofile/op_model_amd.c printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); printk 522 arch/x86/oprofile/op_model_p4.c printk(KERN_ERR printk 563 arch/x86/oprofile/op_model_p4.c printk(KERN_ERR printk 580 arch/x86/oprofile/op_model_p4.c printk(KERN_ERR "oprofile: P4 PMC not available\n"); printk 39 arch/x86/pci/acpi.c printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident); printk 159 arch/x86/pci/acpi.c printk(KERN_INFO "PCI: %s host bridge windows from ACPI; " printk 337 arch/x86/pci/acpi.c printk(KERN_WARNING "pci_bus %04x:%02x: " printk 407 arch/x86/pci/acpi.c printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); printk 419 arch/x86/pci/acpi.c printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); printk 167 arch/x86/pci/amd_bus.c printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", printk 199 arch/x86/pci/amd_bus.c printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20); printk 207 arch/x86/pci/amd_bus.c printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf); printk 237 arch/x86/pci/amd_bus.c printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", printk 265 arch/x86/pci/amd_bus.c printk(KERN_CONT " ==> [%llx, %llx]", start, endx); printk 271 arch/x86/pci/amd_bus.c printk(KERN_CONT " %s [%llx, %llx]", endx ? "and" : "==>", start, end); printk 273 arch/x86/pci/amd_bus.c printk(KERN_CONT "%s\n", endx?"":" ==> none"); printk 282 arch/x86/pci/amd_bus.c printk(KERN_CONT "\n"); printk 295 arch/x86/pci/amd_bus.c printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20); printk 320 arch/x86/pci/amd_bus.c printk(KERN_DEBUG "bus: %pR on node %x link %x\n", printk 323 arch/x86/pci/amd_bus.c printk(KERN_DEBUG "bus: %02x %pR\n", printk 79 arch/x86/pci/broadcom_bus.c printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res); printk 82 arch/x86/pci/broadcom_bus.c printk(KERN_INFO "host bridge window %pR\n", &root_res->res); printk 41 arch/x86/pci/bus_numa.c printk(KERN_DEBUG "PCI: root bus %02x: hardware-probed resources\n", printk 65 arch/x86/pci/bus_numa.c printk(KERN_DEBUG "PCI: root bus %02x: using default resources\n", bus); printk 85 arch/x86/pci/common.c printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident); printk 191 arch/x86/pci/common.c printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); printk 220 arch/x86/pci/common.c printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" printk 228 arch/x86/pci/common.c printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n", printk 465 arch/x86/pci/common.c printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); printk 470 arch/x86/pci/common.c printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); printk 492 arch/x86/pci/common.c printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", printk 496 arch/x86/pci/common.c printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); printk 503 arch/x86/pci/common.c printk(KERN_WARNING "PCI: System does not support PCI\n"); printk 267 arch/x86/pci/direct.c printk(KERN_INFO "PCI: Using configuration type %d for base access\n", printk 275 arch/x86/pci/direct.c printk(KERN_INFO "PCI: Using configuration type 1 " printk 36 arch/x86/pci/init.c printk(KERN_ERR printk 103 arch/x86/pci/irq.c printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); printk 164 arch/x86/pci/irq.c printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq); printk 827 arch/x86/pci/irq.c printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n"); printk 1077 arch/x86/pci/irq.c printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", printk 1091 arch/x86/pci/irq.c printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", printk 1167 arch/x86/pci/irq.c printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); printk 134 arch/x86/pci/mmconfig_32.c printk(KERN_INFO "PCI: Using MMCONFIG for extended config space\n"); printk 293 arch/x86/pci/olpc.c printk(KERN_WARNING "OLPC PCI: Config write to devfn" printk 307 arch/x86/pci/olpc.c printk(KERN_INFO "PCI: Using configuration type OLPC XO-1\n"); printk 50 arch/x86/pci/pcbios.c printk(KERN_INFO "PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n"); printk 114 arch/x86/pci/pcbios.c printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service); printk 117 arch/x86/pci/pcbios.c printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n", printk 166 arch/x86/pci/pcbios.c printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n", printk 170 arch/x86/pci/pcbios.c printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n", printk 319 arch/x86/pci/pcbios.c printk("PCI: unsupported BIOS32 revision %d at 0x%p\n", printk 325 arch/x86/pci/pcbios.c printk("PCI: BIOS32 entry (0x%p) in high memory, " printk 389 arch/x86/pci/pcbios.c printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff); printk 397 arch/x86/pci/pcbios.c printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n"); printk 85 arch/x86/pci/xen.c printk(KERN_WARNING "xen map irq failed %d\n", rc); printk 104 arch/x86/pci/xen.c printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi); printk 128 arch/x86/pci/xen.c printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", printk 139 arch/x86/pci/xen.c printk(KERN_INFO "Already setup the GSI :%d\n", gsi); printk 141 arch/x86/pci/xen.c printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n", printk 406 arch/x86/pci/xen.c printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n"); printk 123 arch/x86/platform/geode/alix.c printk(KERN_NOTICE "%s: forced to skip BIOS test, " printk 152 arch/x86/platform/geode/alix.c printk(KERN_INFO printk 174 arch/x86/platform/geode/alix.c printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n", printk 111 arch/x86/platform/geode/geos.c printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n", printk 105 arch/x86/platform/geode/net5501.c printk(KERN_ERR "%s: failed to get rombase\n", KBUILD_MODNAME); printk 118 arch/x86/platform/geode/net5501.c printk(KERN_INFO "%s: system is recognized as \"%s\"\n", printk 56 arch/x86/platform/iris/iris.c printk(KERN_ERR "This machine does not seem to be an Iris. " printk 62 arch/x86/platform/iris/iris.c printk(KERN_INFO "Iris power_off handler installed.\n"); printk 69 arch/x86/platform/iris/iris.c printk(KERN_INFO "Iris power_off handler uninstalled.\n"); printk 96 arch/x86/platform/iris/iris.c printk(KERN_ERR "The force parameter has not been set to 1." printk 102 arch/x86/platform/iris/iris.c printk(KERN_ERR "Failed to register iris platform driver: %d\n", printk 109 arch/x86/platform/iris/iris.c printk(KERN_ERR "Failed to register iris platform device\n"); printk 93 arch/x86/platform/olpc/olpc-xo1-pm.c printk(KERN_INFO "OLPC XO-1 power off sequence...\n"); printk 147 arch/x86/platform/olpc/olpc-xo1-pm.c printk(KERN_INFO "OLPC XO-1 support registered\n"); printk 39 arch/x86/platform/olpc/olpc.c printk(KERN_ERR "olpc-ec: invalid argument to " printk 42 arch/x86/platform/olpc/olpc.c printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n", printk 75 arch/x86/platform/olpc/olpc.c printk(KERN_WARNING "olpc-ec: %d: waited %u ms for IBF!\n", printk 95 arch/x86/platform/olpc/olpc.c printk(KERN_WARNING "olpc-ec: %d: waited %u ms for OBF!\n", printk 120 arch/x86/platform/olpc/olpc.c printk(KERN_ERR "olpc-ec: timeout while attempting to " printk 126 arch/x86/platform/olpc/olpc.c printk(KERN_ERR "olpc-ec: timeout waiting for EC to " printk 145 arch/x86/platform/olpc/olpc.c printk(KERN_ERR "olpc-ec: timeout waiting for EC to read " printk 156 arch/x86/platform/olpc/olpc.c printk(KERN_ERR "olpc-ec: timeout waiting for" printk 166 arch/x86/platform/olpc/olpc.c printk(KERN_ERR "olpc-ec: timeout waiting for" printk 34 arch/x86/platform/olpc/olpc_ofw.c printk(KERN_ERR "failed to remap OFW's pgd - disabling OFW!\n"); printk 105 arch/x86/platform/olpc/olpc_ofw.c printk(KERN_ERR "OFW detected, but cif has invalid address 0x%lx - disabling.\n", printk 113 arch/x86/platform/olpc/olpc_ofw.c printk(KERN_INFO "OFW detected in memory, cif @ 0x%lx (reserving top %ldMB)\n", printk 44 arch/x86/platform/uv/uv_sysfs.c printk(KERN_WARNING "kobject_create_and_add sgi_uv failed\n"); printk 50 arch/x86/platform/uv/uv_sysfs.c printk(KERN_WARNING "sysfs_create_file partition_id failed\n"); printk 56 arch/x86/platform/uv/uv_sysfs.c printk(KERN_WARNING "sysfs_create_file coherence_id failed\n"); printk 360 arch/x86/platform/uv/uv_time.c printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc); printk 362 arch/x86/platform/uv/uv_time.c printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n", printk 393 arch/x86/platform/uv/uv_time.c printk(KERN_INFO "UV RTC clockevents registered\n"); printk 399 arch/x86/platform/uv/uv_time.c printk(KERN_INFO "UV RTC clockevents failed rc %d\n", rc); printk 26 arch/x86/um/bugs_32.c printk(UM_KERN_INFO "Checking for host processor cmov support..."); printk 37 arch/x86/um/bugs_32.c printk(UM_KERN_CONT "Yes\n"); printk 39 arch/x86/um/bugs_32.c printk(UM_KERN_CONT "No\n"); printk 56 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "SIGILL in init, could not read " printk 65 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "SIGILL caused by cmov, which this " printk 69 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "SIGILL caused by cmov, which this " printk 72 arch/x86/um/bugs_32.c printk(UM_KERN_ERR "Bad value for host_has_cmov (%d)", printk 254 arch/x86/um/ldt.c printk(KERN_ERR "ldt_get_host_info: couldn't allocate buffer " printk 261 arch/x86/um/ldt.c printk(KERN_ERR "ldt_get_host_info: couldn't read host ldt\n"); printk 281 arch/x86/um/ldt.c printk(KERN_ERR "ldt_get_host_info: couldn't allocate " printk 164 arch/x86/um/os-Linux/registers.c printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n", printk 21 arch/x86/um/ptrace_32.c printk(KERN_WARNING "arch_switch_tls failed, errno %d, " printk 24 arch/x86/um/ptrace_32.c printk(KERN_WARNING "arch_switch_tls failed, errno = EINVAL\n"); printk 42 arch/x86/um/ptrace_32.c printk(KERN_ERR "is_syscall : failed to read " printk 218 arch/x86/um/ptrace_64.c printk("is_syscall : failed to read instruction from " printk 220 arch/x86/um/signal.c printk(KERN_ERR "copy_sc_from_user - " printk 298 arch/x86/um/signal.c printk(KERN_ERR "copy_sc_to_user - save_fpx_registers " printk 17 arch/x86/um/sysrq_32.c printk("\n"); printk 18 arch/x86/um/sysrq_32.c printk("EIP: %04lx:[<%08lx>] CPU: %d %s", printk 22 arch/x86/um/sysrq_32.c printk(" ESP: %04lx:%08lx", 0xffff & PT_REGS_SS(regs), printk 24 arch/x86/um/sysrq_32.c printk(" EFLAGS: %08lx\n %s\n", PT_REGS_EFLAGS(regs), printk 26 arch/x86/um/sysrq_32.c printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", printk 29 arch/x86/um/sysrq_32.c printk("ESI: %08lx EDI: %08lx EBP: %08lx", printk 31 arch/x86/um/sysrq_32.c printk(" DS: %04lx ES: %04lx\n", printk 18 arch/x86/um/sysrq_64.c printk("\n"); printk 20 arch/x86/um/sysrq_64.c printk(KERN_INFO "Pid: %d, comm: %.20s %s %s\n", task_pid_nr(current), printk 22 arch/x86/um/sysrq_64.c printk(KERN_INFO "RIP: %04lx:[<%016lx>]\n", PT_REGS_CS(regs) & 0xffff, printk 24 arch/x86/um/sysrq_64.c printk(KERN_INFO "RSP: %016lx EFLAGS: %08lx\n", PT_REGS_SP(regs), printk 26 arch/x86/um/sysrq_64.c printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n", printk 28 arch/x86/um/sysrq_64.c printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n", printk 30 arch/x86/um/sysrq_64.c printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n", printk 32 arch/x86/um/sysrq_64.c printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n", printk 34 arch/x86/um/sysrq_64.c printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n", printk 33 arch/x86/um/tls_32.c printk(KERN_ERR "PTRACE_SET_THREAD_AREA failed, err = %d, " printk 49 arch/x86/um/tls_32.c printk(KERN_ERR "PTRACE_GET_THREAD_AREA failed, err = %d, " printk 261 arch/x86/um/tls_32.c printk(KERN_ERR "get_tls_entry: task with pid %d got here " printk 377 arch/x86/um/tls_32.c printk(KERN_INFO "Host TLS support detected\n"); printk 378 arch/x86/um/tls_32.c printk(KERN_INFO "Detected host type: "); printk 381 arch/x86/um/tls_32.c printk(KERN_CONT "i386"); printk 384 arch/x86/um/tls_32.c printk(KERN_CONT "x86_64"); printk 387 arch/x86/um/tls_32.c printk(KERN_CONT " (GDT indexes %d to %d)\n", printk 391 arch/x86/um/tls_32.c printk(KERN_ERR " Host TLS support NOT detected! " printk 46 arch/x86/um/vdso/vma.c printk(KERN_ERR "Cannot allocate vdso\n"); printk 95 arch/x86/xen/enlighten_hvm.c printk(KERN_INFO "Xen version %d.%d.\n", major, minor); printk 117 arch/x86/xen/enlighten_pv.c printk(KERN_INFO "Xen version: %d.%d%s%s\n", printk 67 arch/x86/xen/mmu_hvm.c printk(KERN_DEBUG "HVMOP_pagetable_dying not supported\n"); printk 33 arch/x86/xen/platform-pci-unplug.c printk(KERN_ERR "Xen Platform PCI: unrecognised magic value\n"); printk 39 arch/x86/xen/platform-pci-unplug.c printk(KERN_DEBUG "Xen Platform PCI: I/O protocol version %d\n", printk 47 arch/x86/xen/platform-pci-unplug.c printk(KERN_ERR "Xen Platform: blacklisted by host\n"); printk 52 arch/x86/xen/platform-pci-unplug.c printk(KERN_WARNING "Xen Platform PCI: unknown I/O protocol version\n"); printk 158 arch/x86/xen/platform-pci-unplug.c printk(KERN_INFO "Netfront and the Xen platform PCI driver have " printk 163 arch/x86/xen/platform-pci-unplug.c printk(KERN_INFO "Blkfront and the Xen platform PCI driver have " printk 203 arch/x86/xen/platform-pci-unplug.c printk(KERN_WARNING "unrecognised option '%s' " printk 118 arch/x86/xen/setup.c printk(KERN_WARNING "Warning: not enough extra memory regions\n"); printk 974 arch/x86/xen/setup.c printk(KERN_ERR "Failed to set syscall callback: %d\n", ret); printk 1012 arch/x86/xen/setup.c printk(KERN_INFO "ACPI in unprivileged domain disabled\n"); printk 211 arch/x86/xen/smp.c printk(KERN_ERR "xen: vector 0x%x is not implemented\n", printk 91 arch/x86/xen/spinlock.c printk("cpu %d spinlock event irq %d\n", cpu, irq); printk 123 arch/x86/xen/spinlock.c printk(KERN_DEBUG "xen: PV spinlocks disabled\n"); printk 127 arch/x86/xen/spinlock.c printk(KERN_DEBUG "xen: PV spinlocks enabled\n"); printk 338 arch/x86/xen/time.c printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu); printk 489 arch/x86/xen/time.c printk(KERN_DEBUG "Xen: using vcpuop timer interface\n"); printk 226 arch/xtensa/include/asm/pgtable.h printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) printk 228 arch/xtensa/include/asm/pgtable.h printk("%s:%d: bad pgd entry %08lx.\n", __FILE__, __LINE__, pgd_val(e)) printk 47 arch/xtensa/kernel/irq.c printk("Stack overflow in do_IRQ: %ld\n", printk 127 block/bio-integrity.c printk(KERN_ERR "%s: bip_vec full\n", __func__); printk 240 block/bio-integrity.c printk(KERN_ERR "could not allocate integrity buffer\n"); printk 251 block/bio-integrity.c printk(KERN_ERR "could not allocate data integrity bioset\n"); printk 280 block/bio-integrity.c printk(KERN_ERR "could not attach integrity payload\n"); printk 247 block/blk-core.c printk(KERN_INFO "%s: dev %s: flags=%llx\n", msg, printk 251 block/blk-core.c printk(KERN_INFO " sector %llu, nr/cnr %u/%u\n", printk 254 block/blk-core.c printk(KERN_INFO " bio %p, biotail %p, len %u\n", printk 745 block/blk-core.c printk(KERN_INFO "attempt to access beyond end of device\n"); printk 746 block/blk-core.c printk(KERN_INFO "%s: rw=%d, want=%Lu, limit=%Lu\n", printk 881 block/blk-core.c printk(KERN_ERR printk 1173 block/blk-core.c printk(KERN_DEBUG "%s(%d): %s block %Lu on %s (%u sectors)\n", printk 1220 block/blk-core.c printk(KERN_ERR "%s: over max size limit. (%u > %u)\n", printk 1234 block/blk-core.c printk(KERN_ERR "%s: over max segments limit. (%hu > %hu)\n", printk 407 block/blk-ioc.c printk(KERN_ERR "cfq: icq link failed!\n"); printk 1390 block/blk-mq.c printk(KERN_WARNING "run queue from wrong CPU %d, hctx %s\n", printk 190 block/blk-settings.c printk(KERN_INFO "%s: set to minimum %d\n", printk 273 block/blk-settings.c printk(KERN_INFO "%s: set to minimum %d\n", printk 310 block/blk-settings.c printk(KERN_INFO "%s: set to minimum %d\n", printk 664 block/blk-settings.c printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n", printk 736 block/blk-settings.c printk(KERN_INFO "%s: set to minimum %lx\n", printk 398 block/bsg-lib.c printk(KERN_ERR "%s: bsg interface failed to " printk 428 block/bsg.c printk(KERN_ERR "bsg: too many bsg devices\n"); printk 505 block/bsg.c printk(KERN_INFO BSG_DESCRIPTION " version " BSG_VERSION printk 556 block/elevator.c printk(KERN_INFO "io scheduler %s registered\n", e->elevator_name); printk 369 block/genhd.c printk("%s: failed to get major for %s\n", printk 407 block/genhd.c printk("register_blkdev: cannot get major %u for %s\n", printk 975 block/genhd.c printk("%s%s %10llu %s %s", is_part0 ? "" : " ", printk 982 block/genhd.c printk(" driver: %s\n", printk 985 block/genhd.c printk(" (driver?)\n"); printk 987 block/genhd.c printk("\n"); printk 1470 block/genhd.c printk(KERN_ERR printk 432 block/partition-generic.c printk(KERN_CONT "enabling native capacity\n"); printk 437 block/partition-generic.c printk(KERN_CONT "truncated\n"); printk 540 block/partition-generic.c printk(KERN_WARNING "%s: partition table beyond EOD, ", printk 553 block/partition-generic.c printk(KERN_WARNING printk 583 block/partition-generic.c printk(KERN_WARNING printk 592 block/partition-generic.c printk(KERN_WARNING printk 618 block/partition-generic.c printk(KERN_WARNING printk 629 block/partition-generic.c printk(KERN_ERR " %s: p%d could not be added: %ld\n", printk 97 block/partitions/atari.c printk (" block %ld read failed\n", partsect); printk 104 block/partitions/atari.c printk( "\nFirst sub-partition in extended partition is not valid!\n" ); printk 119 block/partitions/atari.c printk("\nID of extended partition is not XGM!\n"); printk 127 block/partitions/atari.c printk( "\nMaximum number of partitions reached!\n" ); printk 178 block/partitions/check.c printk(KERN_INFO "%s", state->pp_buf); printk 192 block/partitions/check.c printk(KERN_INFO "%s", state->pp_buf); printk 51 block/partitions/ldm.c printk("%s%s(): %pV\n", level, function, &vaf); printk 60 block/partitions/sgi.c printk(KERN_WARNING "Dev %s SGI disklabel: csum bad, label corrupted\n", printk 81 block/partitions/sun.c printk("Dev %s Sun disklabel: Csum bad, label corrupted\n", printk 654 block/scsi_ioctl.c printk(KERN_WARNING "program %s is using a deprecated SCSI ioctl, please convert it to SG_IO\n", current->comm); printk 55 crypto/ansi_cprng.c printk(KERN_CRIT "%s", note); printk 64 crypto/ansi_cprng.c printk(format, ##args);\ printk 132 crypto/ansi_cprng.c printk(KERN_ERR printk 214 crypto/asymmetric_keys/pkcs7_parser.c printk("PKCS7: Unknown OID: [%lu] %s\n", printk 252 crypto/asymmetric_keys/pkcs7_parser.c printk("Unsupported digest algo: %u\n", ctx->last_oid); printk 273 crypto/asymmetric_keys/pkcs7_parser.c printk("Unsupported pkey algo: %u\n", ctx->last_oid); printk 23 crypto/async_tx/async_tx.c printk(KERN_INFO "async_tx: api initialized (async)\n"); printk 26 crypto/fips.c printk(KERN_INFO "fips mode: %s\n", printk 471 crypto/tcrypt.c printk("%d operations in %d seconds (%ld bytes)\n", printk 512 crypto/tcrypt.c printk("1 operation in %lu cycles (%d bytes)\n", printk 575 crypto/tcrypt.c printk(KERN_INFO "\ntesting speed of %s (%s) %s\n", algo, printk 617 crypto/tcrypt.c printk(KERN_INFO "test %u (%d bit key, %d byte blocks): ", printk 921 crypto/tcrypt.c printk("%6u opers/sec, %9lu bytes/sec\n", printk 1071 crypto/tcrypt.c printk(KERN_INFO "\ntesting speed of async %s (%s)\n", algo, printk 1640 crypto/tcrypt.c printk("alg %s ", *name); printk 1641 crypto/tcrypt.c printk(crypto_has_alg(*name, 0, 0) ? printk 3038 crypto/tcrypt.c printk(KERN_ERR "tcrypt: one or more tests failed!\n"); printk 2421 crypto/testmgr.c printk(KERN_ERR "alg: cipher: Test %d failed " printk 2941 crypto/testmgr.c printk(KERN_ERR "alg: comp: compression failed " printk 2958 crypto/testmgr.c printk(KERN_ERR "alg: comp: Compression test %d " printk 2985 crypto/testmgr.c printk(KERN_ERR "alg: comp: decompression failed " printk 2992 crypto/testmgr.c printk(KERN_ERR "alg: comp: Decompression test %d " printk 3000 crypto/testmgr.c printk(KERN_ERR "alg: comp: Decompression test %d " printk 3198 crypto/testmgr.c printk(KERN_ERR "alg: cprng: Failed to allocate seed space " printk 3214 crypto/testmgr.c printk(KERN_ERR "alg: cprng: Failed to reset rng " printk 3223 crypto/testmgr.c printk(KERN_ERR "alg: cprng: Failed to obtain " printk 3234 crypto/testmgr.c printk(KERN_ERR "alg: cprng: Test %d failed for %s\n", printk 3256 crypto/testmgr.c printk(KERN_ERR "alg: cipher: Failed to load transform for " printk 3328 crypto/testmgr.c printk(KERN_ERR "alg: crc32c: Failed to load transform for %s: " printk 3342 crypto/testmgr.c printk(KERN_ERR "alg: crc32c: Operation failed for " printk 3367 crypto/testmgr.c printk(KERN_ERR "alg: cprng: Failed to load transform for %s: " printk 3394 crypto/testmgr.c printk(KERN_ERR "alg: drbg: could not allocate DRNG handle for " printk 3405 crypto/testmgr.c printk(KERN_ERR "alg: drbg: Failed to reset rng\n"); printk 3419 crypto/testmgr.c printk(KERN_ERR "alg: drbg: could not obtain random data for " printk 3434 crypto/testmgr.c printk(KERN_ERR "alg: drbg: could not obtain random data for " printk 3463 crypto/testmgr.c printk(KERN_ERR "alg: drbg: Test %d failed for %s\n", printk 5267 crypto/testmgr.c printk(KERN_INFO "alg: No test for %s (%s)\n", alg, driver); printk 98 crypto/xor.c printk(KERN_INFO " %-10s: %5d.%03d MB/sec\n", tmpl->name, printk 111 crypto/xor.c printk(KERN_INFO "xor: automatically using best " printk 119 crypto/xor.c printk(KERN_WARNING "xor: Yikes! No memory available.\n"); printk 131 crypto/xor.c printk(KERN_INFO "xor: measuring software checksum speed\n"); printk 138 crypto/xor.c printk(KERN_INFO "xor: using function: %s (%d.%03d MB/sec)\n", printk 193 drivers/acpi/ac.c printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded," printk 366 drivers/acpi/ac.c printk(KERN_INFO PREFIX "%s [%s] (%s)\n", printk 110 drivers/acpi/acpi_extlog.c printk("%s""Hardware error detected on CPU%d\n", pfx_seq, cpu); printk 333 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Invalid _BCL data\n"); printk 678 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Invalid _DDC data\n"); printk 841 drivers/acpi/acpi_video.c printk(KERN_ERR "can't allocate memory\n"); printk 862 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Invalid data\n"); printk 1022 drivers/acpi/acpi_video.c printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n"); printk 1082 drivers/acpi/acpi_video.c printk(KERN_WARNING FW_BUG printk 1351 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX printk 1450 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Failed to switch the brightness\n"); printk 1811 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Create sysfs link\n"); printk 1815 drivers/acpi/acpi_video.c printk(KERN_ERR PREFIX "Create sysfs link\n"); printk 2029 drivers/acpi/acpi_video.c printk(KERN_WARNING FW_BUG printk 2072 drivers/acpi/acpi_video.c printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", printk 554 drivers/acpi/apei/ghes.c printk("%s""Hardware error from APEI Generic Hardware Error Source: %d\n", printk 76 drivers/acpi/blacklist.c printk(KERN_NOTICE PREFIX "DMI detected: %s (force ACPI _REV to 5)\n", printk 50 drivers/acpi/bus.c printk(KERN_NOTICE "%s detected - " printk 993 drivers/acpi/bus.c printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n"); printk 997 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Using %s for interrupt routing\n", message); printk 1025 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); printk 1046 drivers/acpi/bus.c printk(KERN_ERR PREFIX printk 1053 drivers/acpi/bus.c printk(KERN_ERR PREFIX printk 1100 drivers/acpi/bus.c printk(KERN_ERR PREFIX "Unable to enable ACPI\n"); printk 1129 drivers/acpi/bus.c printk(KERN_ERR PREFIX printk 1148 drivers/acpi/bus.c printk(KERN_ERR PREFIX printk 1155 drivers/acpi/bus.c printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n"); printk 1184 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Interpreter enabled\n"); printk 1203 drivers/acpi/bus.c printk(KERN_ERR PREFIX printk 1231 drivers/acpi/bus.c printk(KERN_INFO PREFIX "Interpreter disabled.\n"); printk 1237 drivers/acpi/bus.c printk(KERN_WARNING "%s: kset create error\n", __func__); printk 285 drivers/acpi/button.c printk(KERN_ERR PREFIX "More than one Lid device found!\n"); printk 534 drivers/acpi/button.c printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); printk 578 drivers/acpi/button.c printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device)); printk 35 drivers/acpi/cm_sbs.c printk(KERN_ERR PREFIX printk 66 drivers/acpi/cm_sbs.c printk(KERN_ERR PREFIX printk 179 drivers/acpi/event.c printk(KERN_WARNING PREFIX printk 25 drivers/acpi/glue.c printk(KERN_DEBUG PREFIX fmt, ##__VA_ARGS__) printk 30 drivers/acpi/glue.c printk(KERN_DEBUG PREFIX fmt, ##__VA_ARGS__); \ printk 47 drivers/acpi/glue.c printk(KERN_INFO PREFIX "bus type %s registered\n", type->name); printk 62 drivers/acpi/glue.c printk(KERN_INFO PREFIX "bus type %s unregistered\n", printk 173 drivers/acpi/nvs.c printk(KERN_INFO "PM: Saving platform NVS memory\n"); printk 205 drivers/acpi/nvs.c printk(KERN_INFO "PM: Restoring platform NVS memory\n"); printk 158 drivers/acpi/osl.c printk("%s", buffer); printk 160 drivers/acpi/osl.c printk(KERN_CONT "%s", buffer); printk 165 drivers/acpi/osl.c printk("%s", buffer); printk 167 drivers/acpi/osl.c printk(KERN_CONT "%s", buffer); printk 327 drivers/acpi/osl.c printk(KERN_ERR PREFIX "Cannot map memory that high\n"); printk 527 drivers/acpi/osl.c printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n", printk 533 drivers/acpi/osl.c printk(KERN_INFO PREFIX "Overriding _REV return value to 5\n"); printk 574 drivers/acpi/osl.c printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n", printk 582 drivers/acpi/osl.c printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); printk 1120 drivers/acpi/osl.c printk(KERN_ERR PREFIX printk 1354 drivers/acpi/osl.c printk(KERN_ERR PREFIX "Fatal opcode executed\n"); printk 1479 drivers/acpi/osl.c printk(KERN_NOTICE "ACPI: This conflict may" printk 1482 drivers/acpi/osl.c printk(KERN_INFO "ACPI: If an ACPI driver is available" printk 1713 drivers/acpi/osl.c printk(KERN_NOTICE PREFIX printk 129 drivers/acpi/pci_irq.c printk(KERN_WARNING PREFIX "firmware reports " printk 108 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX printk 126 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX printk 134 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX printk 148 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "_PRS resource type 0x%x isn't an IRQ\n", printk 207 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX printk 216 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "_CRS resource type 0x%x isn't an IRQ\n", printk 244 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Unable to read status\n"); printk 267 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "_CRS returned 0\n"); printk 334 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid Resource_type %d\n", link->irq.resource_type); printk 355 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Unable to read status\n"); printk 359 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX printk 380 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX printk 558 drivers/acpi/pci_link.c printk(KERN_WARNING PREFIX "_CRS %d not found" printk 583 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "No IRQ available for %s [%s]. " printk 592 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Unable to set IRQ for %s [%s]. " printk 625 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link device\n"); printk 631 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link context\n"); printk 637 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid index %d\n", index); printk 649 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Link active IRQ is 0!\n"); printk 679 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link device\n"); printk 685 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Invalid link context\n"); printk 692 drivers/acpi/pci_link.c printk(KERN_ERR PREFIX "Link isn't initialized\n"); printk 747 drivers/acpi/pci_link.c printk(KERN_INFO PREFIX "%s [%s] (IRQs", acpi_device_name(device), printk 751 drivers/acpi/pci_link.c printk(KERN_CONT " *%d", link->irq.possible[i]); printk 754 drivers/acpi/pci_link.c printk(KERN_CONT " %d", link->irq.possible[i]); printk 757 drivers/acpi/pci_link.c printk(KERN_CONT ")"); printk 760 drivers/acpi/pci_link.c printk(KERN_CONT " *%d", link->irq.active); printk 763 drivers/acpi/pci_link.c printk(KERN_CONT ", disabled."); printk 765 drivers/acpi/pci_link.c printk(KERN_CONT "\n"); printk 677 drivers/acpi/power.c printk(KERN_ERR PREFIX "_DSW execution failed\n"); printk 685 drivers/acpi/power.c printk(KERN_ERR PREFIX "_PSW execution failed\n"); printk 965 drivers/acpi/power.c printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device), printk 210 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PCT data\n"); printk 224 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PCT data (control_register)\n"); printk 240 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PCT data (status_register)\n"); printk 309 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSS data\n"); printk 362 drivers/acpi/processor_perflib.c printk(KERN_ERR FW_BUG PREFIX printk 380 drivers/acpi/processor_perflib.c printk(KERN_ERR FW_BUG PREFIX printk 431 drivers/acpi/processor_perflib.c printk(KERN_WARNING FW_BUG "BIOS needs update for CPU " printk 526 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD data\n"); printk 532 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD data\n"); printk 543 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD data\n"); printk 549 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Unknown _PSD:num_entries\n"); printk 555 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Unknown _PSD:revision\n"); printk 563 drivers/acpi/processor_perflib.c printk(KERN_ERR PREFIX "Invalid _PSD:coord_type\n"); printk 244 drivers/acpi/processor_throttling.c printk(KERN_WARNING printk 264 drivers/acpi/processor_throttling.c printk(KERN_WARNING printk 430 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC data\n"); printk 444 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX printk 461 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC data (status_register)\n"); printk 473 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); printk 480 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); printk 514 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSS data\n"); printk 553 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX printk 594 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSD data\n"); printk 600 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSD data\n"); printk 613 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Invalid _TSD data\n"); printk 619 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown _TSD:num_entries\n"); printk 625 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown _TSD:revision\n"); printk 718 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX printk 739 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX printk 752 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX printk 759 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX printk 791 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown addr space %d\n", printk 824 drivers/acpi/processor_throttling.c printk(KERN_ERR PREFIX "Unknown addr space %d\n", printk 933 drivers/acpi/processor_throttling.c printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); printk 65 drivers/acpi/reboot.c printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.\n"); printk 550 drivers/acpi/sbs.c printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n", printk 583 drivers/acpi/sbs.c printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n", printk 112 drivers/acpi/sbshc.c printk(KERN_ERR PREFIX "host controller is not configured\n"); printk 257 drivers/acpi/sbshc.c printk(KERN_ERR PREFIX "error obtaining _EC.\n"); printk 703 drivers/acpi/scan.c printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", printk 1626 drivers/acpi/scan.c printk(KERN_ERR PREFIX "Memory allocation error\n"); printk 2173 drivers/acpi/scan.c printk(KERN_WARNING PREFIX "STAO table present, but SPCR is missing\n"); printk 2209 drivers/acpi/scan.c printk(KERN_INFO PREFIX "STAO Name List not yet supported."); printk 44 drivers/acpi/sleep.c printk(KERN_NOTICE "Failure in evaluating _TTS object\n"); printk 73 drivers/acpi/sleep.c printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", printk 463 drivers/acpi/sleep.c printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", printk 1298 drivers/acpi/sleep.c printk(KERN_DEBUG "%s called\n", __func__); printk 759 drivers/acpi/sysfs.c printk(KERN_WARNING PREFIX printk 56 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package argument\n"); printk 61 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid format argument\n"); printk 66 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid buffer argument\n"); printk 72 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Format specifies more objects [%d]" printk 102 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package element" printk 127 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package element" printk 142 drivers/acpi/utils.c printk(KERN_WARNING PREFIX "Invalid package element" printk 494 drivers/acpi/utils.c printk("%sACPI: %s: %pV", level, path ? path : "<n/a>" , &vaf); printk 424 drivers/ata/acard-ahci.c printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); printk 986 drivers/ata/ahci.c printk(KERN_INFO "ahci: enabling MCP89 AHCI mode\n"); printk 1549 drivers/ata/ahci.c printk(KERN_INFO printk 7042 drivers/ata/libata-core.c printk(KERN_WARNING "ata: failed to extend force table, " printk 7054 drivers/ata/libata-core.c printk(KERN_WARNING "ata: failed to parse force " printk 7094 drivers/ata/libata-core.c printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); printk 7268 drivers/ata/libata-core.c printk("%sata%u: %pV", level, ap->print_id, &vaf); printk 7286 drivers/ata/libata-core.c printk("%sata%u.%02u: %pV", printk 7289 drivers/ata/libata-core.c printk("%sata%u: %pV", printk 7307 drivers/ata/libata-core.c printk("%sata%u.%02u: %pV", printk 158 drivers/ata/pata_atp867x.c printk(KERN_WARNING "ATP867X: active %dclk is invalid. " printk 191 drivers/ata/pata_atp867x.c printk(KERN_WARNING "ATP867X: recover %dclk is invalid. " printk 283 drivers/ata/pata_atp867x.c printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n", printk 293 drivers/ata/pata_atp867x.c printk(KERN_DEBUG "ATP867X: port[%d] addresses\n" printk 373 drivers/ata/pata_atp867x.c printk(KERN_DEBUG "ATP867X: set latency timer of device %s" printk 426 drivers/ata/pata_atp867x.c printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i, printk 489 drivers/ata/pata_atp867x.c printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)", printk 64 drivers/ata/pata_cmd640.c printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); printk 119 drivers/ata/pata_cmd64x.c printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); printk 133 drivers/ata/pata_cmd64x.c printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", printk 154 drivers/ata/pata_cs5520.c printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n"); printk 159 drivers/ata/pata_cs5520.c printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n"); printk 179 drivers/ata/pata_cs5530.c printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n"); printk 208 drivers/ata/pata_cs5530.c printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); printk 212 drivers/ata/pata_cs5530.c printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); printk 266 drivers/ata/pata_cs5536.c printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); printk 271 drivers/ata/pata_cs5536.c printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); printk 61 drivers/ata/pata_cypress.c printk(KERN_ERR DRV_NAME ": mome computation failed.\n"); printk 434 drivers/ata/pata_it821x.c printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); printk 636 drivers/ata/pata_it821x.c printk(KERN_INFO "%d: %-6s %-8s %s %s\n", printk 639 drivers/ata/pata_it821x.c printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n", printk 642 drivers/ata/pata_it821x.c printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]); printk 679 drivers/ata/pata_it821x.c printk(KERN_ERR "it821x_firmware_command: rejected\n"); printk 689 drivers/ata/pata_it821x.c printk(KERN_ERR "it821x_firmware_command: timeout\n"); printk 712 drivers/ata/pata_it821x.c printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n", printk 774 drivers/ata/pata_it821x.c printk(KERN_WARNING DRV_NAME": Revision 0x10, workarounds activated.\n"); printk 922 drivers/ata/pata_it821x.c printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); printk 928 drivers/ata/pata_it821x.c printk(KERN_INFO DRV_NAME": controller in %s mode.\n", printk 177 drivers/ata/pata_legacy.c printk(KERN_ERR "pata_legacy: Too many interfaces.\n"); printk 892 drivers/ata/pata_legacy.c printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller" printk 903 drivers/ata/pata_legacy.c printk(KERN_INFO "PDC20230-B VLB ATA " printk 1061 drivers/ata/pata_legacy.c printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", printk 47 drivers/ata/pata_marvell.c printk("BAR5:"); printk 49 drivers/ata/pata_marvell.c printk("%02X:%02X ", i, ioread8(barp + i)); printk 50 drivers/ata/pata_marvell.c printk("\n"); printk 152 drivers/ata/pata_marvell.c printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); printk 392 drivers/ata/pata_optidma.c printk(KERN_WARNING "UDMA not supported in this configuration.\n"); printk 36 drivers/ata/pata_pdc2027x.c #define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 221 drivers/ata/pata_pdc2027x.c printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); printk 299 drivers/ata/pata_pdc2027x.c printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); printk 383 drivers/ata/pata_pdc2027x.c printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); printk 523 drivers/ata/pata_pdc2027x.c printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); printk 555 drivers/ata/pata_pdc2027x.c printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); printk 563 drivers/ata/pata_pdc2027x.c printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); printk 72 drivers/ata/pata_rz1000.c printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n"); printk 100 drivers/ata/pata_rz1000.c printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); printk 288 drivers/ata/pata_serverworks.c printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n"); printk 294 drivers/ata/pata_serverworks.c printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n"); printk 310 drivers/ata/pata_sil680.c printk(KERN_INFO "sil680: 100MHz clock.\n"); printk 313 drivers/ata/pata_sil680.c printk(KERN_INFO "sil680: 133MHz clock.\n"); printk 316 drivers/ata/pata_sil680.c printk(KERN_INFO "sil680: Using PCI clock.\n"); printk 320 drivers/ata/pata_sil680.c printk(KERN_ERR "sil680: Clock disabled ?\n"); printk 366 drivers/ata/pdc_adma.c printk("%s\n", obuf); printk 371 drivers/ata/pdc_adma.c printk("%s\n", obuf); printk 549 drivers/ata/pdc_adma.c printk(KERN_ERR "bad alignment for pp->pkt_dma: %08x\n", printk 336 drivers/ata/sata_fsl.c printk(KERN_ERR "fsl-sata: wrong parameter format.\n"); printk 375 drivers/ata/sata_fsl.c printk(KERN_ERR "fsl-sata: wrong parameter format.\n"); printk 1255 drivers/ata/sata_mv.c printk("%08x ", readl(start + b)); printk 1258 drivers/ata/sata_mv.c printk("\n"); printk 1272 drivers/ata/sata_mv.c printk("%08x ", dw); printk 1275 drivers/ata/sata_mv.c printk("\n"); printk 3279 drivers/ata/sata_mv.c printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); printk 3293 drivers/ata/sata_mv.c printk(KERN_ERR DRV_NAME ": can't set global reset\n"); printk 3307 drivers/ata/sata_mv.c printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); printk 3856 drivers/ata/sata_mv.c printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID" printk 3860 drivers/ata/sata_mv.c printk(KERN_WARNING DRV_NAME ": For data safety, do not" printk 4263 drivers/ata/sata_mv.c printk(KERN_ERR DRV_NAME ": Error during HW init\n"); printk 612 drivers/ata/sata_sx4.c printk(KERN_ERR "HDMA[0] == 0x%08X\n", readl(dimm_mmio)); printk 613 drivers/ata/sata_sx4.c printk(KERN_ERR "HDMA[1] == 0x%08X\n", readl(dimm_mmio + 4)); printk 614 drivers/ata/sata_sx4.c printk(KERN_ERR "HDMA[2] == 0x%08X\n", readl(dimm_mmio + 8)); printk 615 drivers/ata/sata_sx4.c printk(KERN_ERR "HDMA[3] == 0x%08X\n", readl(dimm_mmio + 12)); printk 1235 drivers/ata/sata_sx4.c printk(KERN_ERR "Local DIMM ECC Enabled\n"); printk 1325 drivers/ata/sata_sx4.c printk(KERN_ERR "Detect Local DIMM Fail\n"); printk 1336 drivers/ata/sata_sx4.c printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); printk 1355 drivers/ata/sata_sx4.c printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], printk 1359 drivers/ata/sata_sx4.c printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], printk 1364 drivers/ata/sata_sx4.c printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], printk 149 drivers/atm/adummy.c printk(KERN_ERR "adummy: version %s\n", DRV_VERSION); printk 154 drivers/atm/adummy.c printk(KERN_ERR DEV_LABEL ": kzalloc() failed\n"); printk 160 drivers/atm/adummy.c printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n"); printk 172 drivers/atm/adummy.c printk(KERN_ERR DEV_LABEL ": adummy_start() failed\n"); printk 37 drivers/atm/ambassador.c printk ("%s version %s\n", description_string, version_string); printk 31 drivers/atm/ambassador.h printk(severity DEV_LABEL ": " format "\n" , ## args) printk 56 drivers/atm/ambassador.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) printk 58 drivers/atm/ambassador.h ( (debug & (bits)) ? printk (format , ## args) : 1 ) printk 60 drivers/atm/ambassador.h ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) printk 62 drivers/atm/ambassador.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) printk 105 drivers/atm/atmtcp.c printk(KERN_ERR "atmtcp_recv_control: unknown type %d\n", printk 66 drivers/atm/eni.c #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) printk 100 drivers/atm/eni.c printk(KERN_CRIT #x "==0x%lx\n",(unsigned long) (x)) printk 129 drivers/atm/eni.c printk(KERN_NOTICE); printk 130 drivers/atm/eni.c printk(ev[i] ? ev[i] : "(null)",ev_a[i],ev_b[i]); printk 172 drivers/atm/eni.c printk(KERN_DEBUG " %d: %p %d\n",i, printk 185 drivers/atm/eni.c printk(KERN_NOTICE "Free memory\n"); printk 187 drivers/atm/eni.c printk(KERN_NOTICE "TX buffers\n"); printk 190 drivers/atm/eni.c printk(KERN_NOTICE " TX %d @ %p: %ld\n",i, printk 192 drivers/atm/eni.c printk(KERN_NOTICE "RX buffers\n"); printk 195 drivers/atm/eni.c printk(KERN_NOTICE " RX %d @ %p: %ld\n",i, printk 198 drivers/atm/eni.c printk(KERN_NOTICE "----\n"); printk 214 drivers/atm/eni.c printk(KERN_CRIT "eni_put_free overflow (%p,%ld)\n", printk 220 drivers/atm/eni.c printk(KERN_CRIT "eni_put_free: order %d too small\n", printk 296 drivers/atm/eni.c printk(KERN_ALERT "eni_free_mem overflow (%p,%d)\n",start, printk 326 drivers/atm/eni.c printk(KERN_ALERT DEV_LABEL "(itf %d): driver error - RX ident " printk 328 drivers/atm/eni.c printk(KERN_ALERT " VCI %d, rxing %d, words %ld\n",vcc->vci, printk 330 drivers/atm/eni.c printk(KERN_ALERT " host descr 0x%lx, rx pos 0x%lx, descr value " printk 333 drivers/atm/eni.c printk(KERN_ALERT " last %p, servicing %d\n",eni_vcc->last, printk 336 drivers/atm/eni.c printk(KERN_NOTICE "---recent events---\n"); printk 365 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %d has " printk 453 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "!j or j too big!!!\n"); printk 465 drivers/atm/eni.c printk(KERN_WARNING DEV_LABEL "(itf %d): RX DMA full\n", printk 575 drivers/atm/eni.c printk(KERN_WARNING DEV_LABEL "(itf %d): " printk 598 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): bad AAL5 PDU " printk 695 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %ld not " printk 830 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): BUG - VCI %d already " printk 876 drivers/atm/eni.c printk(KERN_INFO "%d+%d RX left\n",eni_vcc->servicing, printk 892 drivers/atm/eni.c printk(KERN_INFO "draining RX: host 0x%lx, nic 0x%x\n", printk 912 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): couldn't get free page\n", printk 943 drivers/atm/eni.c printk(KERN_ERR "put_dma: unaligned addr (0x%lx)\n",paddr); printk 945 drivers/atm/eni.c printk(KERN_ERR "put_dma: unaligned size (0x%lx)\n",size); printk 1066 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): VCI %d has mis-aligned " printk 1107 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): needs %d DMA entries " printk 1113 drivers/atm/eni.c printk(KERN_WARNING DEV_LABEL "(itf %d): TX DMA full\n", printk 1463 drivers/atm/eni.c printk(KERN_INFO printk 1468 drivers/atm/eni.c if (eni_boards) printk(KERN_INFO "loss: %ld\n",ENI_DEV(eni_boards)->lost); printk 1478 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - DMA " printk 1481 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - ident " printk 1484 drivers/atm/eni.c printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - DMA " printk 1487 drivers/atm/eni.c printk(KERN_NOTICE "---recent events---\n"); printk 1679 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): error reading ESI " printk 1722 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory " printk 1726 drivers/atm/eni.c printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,", printk 1729 drivers/atm/eni.c printk("\n"); printk 1730 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page " printk 1740 drivers/atm/eni.c printk("\n"); printk 1741 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL printk 1767 drivers/atm/eni.c printk("mem=%dkB (",eni_dev->mem >> 10); printk 1770 drivers/atm/eni.c printk(")\n"); printk 1771 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): ERROR - wrong id 0x%x\n", printk 1780 drivers/atm/eni.c printk("%s%02X",i ? "-" : "",dev->esi[i]); printk 1781 drivers/atm/eni.c printk(")\n"); printk 1782 drivers/atm/eni.c printk(KERN_NOTICE DEV_LABEL "(itf %d): %s,%s\n",dev->number, printk 1816 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", printk 1825 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory+" printk 1831 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): can't set endian swap " printk 1854 drivers/atm/eni.c printk(KERN_ERR DEV_LABEL "(itf %d): couldn't get free page\n", printk 2003 drivers/atm/eni.c printk(KERN_WARNING "Please use /proc/atm/" DEV_LABEL ":%d " printk 2062 drivers/atm/eni.c printk(KERN_CRIT "!skb in eni_send ?\n"); printk 282 drivers/atm/firestream.c #define fs_dprintk(f, str...) if (fs_debug & f) printk (str) printk 338 drivers/atm/firestream.c printk ("%p ", ptr); printk 340 drivers/atm/firestream.c printk ("%02x %s", ptr[j], (j==7)?" ":""); printk 343 drivers/atm/firestream.c printk (" %s", (j==7)?" ":""); printk 347 drivers/atm/firestream.c printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch)); printk 349 drivers/atm/firestream.c printk ("\n"); printk 719 drivers/atm/firestream.c printk (KERN_WARNING "td not aligned: %ld\n", tmp); printk 815 drivers/atm/firestream.c printk (KERN_ERR "Got a receive on a non-open channel %d.\n", channo); printk 837 drivers/atm/firestream.c printk (KERN_WARNING "Don't know what to do with RX status %x: %s.\n", printk 914 drivers/atm/firestream.c printk ("No more free channels for FS50..\n"); printk 925 drivers/atm/firestream.c printk ("Channel is in use for FS155.\n"); printk 968 drivers/atm/firestream.c printk ("Unknown aal: %d\n", atm_vcc->qos.aal); printk 1383 drivers/atm/firestream.c printk ("Kmalloc doesn't align things correctly! %p\n", t); printk 1389 drivers/atm/firestream.c printk (KERN_ERR "Request for > 0x10 alignment not yet implemented (hard!)\n"); printk 1576 drivers/atm/firestream.c printk (KERN_ERR "fs: Too many interrupts. Turning off interrupt %d.\n", printk 1666 drivers/atm/firestream.c printk (KERN_INFO "found a FireStream %d card, base %16llx, irq%d.\n", printk 1706 drivers/atm/firestream.c printk (KERN_ERR "Error initializing the FS... \n"); printk 1719 drivers/atm/firestream.c printk (KERN_ERR "timeout initializing the FS... \n"); printk 1798 drivers/atm/firestream.c printk (KERN_WARNING "Couldn't allocate memory for VCC buffers. Woops!\n"); printk 1808 drivers/atm/firestream.c printk (KERN_WARNING "Couldn't allocate memory for tx_inuse bits!\n"); printk 1835 drivers/atm/firestream.c printk (KERN_WARNING "couldn't get irq %d for firestream.\n", pci_dev->irq); printk 1937 drivers/atm/firestream.c printk ("hptxq:\n"); printk 1939 drivers/atm/firestream.c printk ("%d: %08x %08x %08x %08x \n", printk 1945 drivers/atm/firestream.c printk ("descriptors:\n"); printk 1947 drivers/atm/firestream.c printk ("%d: %p: %08x %08x %p %p\n", printk 70 drivers/atm/fore200e.c printk(FORE200E format, ##args); } while (0) printk 87 drivers/atm/fore200e.c printk(FORE200E "assertion failed! %s[%d]: %s\n", \ printk 256 drivers/atm/fore200e.c printk(FORE200E "cmd polling failed, got status 0x%08x, expected 0x%08x\n", printk 279 drivers/atm/fore200e.c printk(FORE200E "I/O polling failed, got status 0x%08x, expected 0x%08x\n", printk 348 drivers/atm/fore200e.c printk(FORE200E "device %s self-test failed\n", fore200e->name); printk 352 drivers/atm/fore200e.c printk(FORE200E "device %s self-test passed\n", fore200e->name); printk 364 drivers/atm/fore200e.c printk(FORE200E "removing device %s at 0x%lx, IRQ %s\n", printk 489 drivers/atm/fore200e.c printk(FORE200E "can't map device %s\n", fore200e->name); printk 523 drivers/atm/fore200e.c printk(FORE200E "incorrect IRQ setting - misconfigured PCI-PCI bridge?\n"); printk 587 drivers/atm/fore200e.c printk(FORE200E "unable to get PROM data from device %s\n", fore200e->name); printk 680 drivers/atm/fore200e.c printk(FORE200E "unable to map RAM of device %s\n", fore200e->name); printk 871 drivers/atm/fore200e.c printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld supplied but in free list!\n", printk 876 drivers/atm/fore200e.c printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected magn = %d\n", printk 881 drivers/atm/fore200e.c printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected scheme = %d\n", printk 886 drivers/atm/fore200e.c printk(FORE200E "bsq_audit(%d): queue %d.%d, out of range buffer index = %ld !\n", printk 895 drivers/atm/fore200e.c printk(FORE200E "bsq_audit(%d): queue %d.%d, %d bufs in free list, but freebuf_count = %d\n", printk 932 drivers/atm/fore200e.c printk(FORE200E "no more free bufs in queue %d.%d, but freebuf_count = %d\n", printk 940 drivers/atm/fore200e.c printk(FORE200E "queue %d.%d, buffer %lu already supplied\n", printk 1071 drivers/atm/fore200e.c printk(FORE200E "queue %d.%d, buffer %ld was not supplied\n", printk 1275 drivers/atm/fore200e.c printk(FORE200E "unable to %s VC %d.%d.%d\n", printk 1325 drivers/atm/fore200e.c printk(FORE200E "VC %d.%d.%d already in use\n", printk 1706 drivers/atm/fore200e.c printk(FORE200E "unable to get statistics from device %s\n", fore200e->name); printk 1770 drivers/atm/fore200e.c printk(FORE200E "unable to get OC-3 regs of device %s\n", fore200e->name); printk 1807 drivers/atm/fore200e.c printk(FORE200E "unable to set OC-3 reg 0x%02x of device %s\n", reg, fore200e->name); printk 1962 drivers/atm/fore200e.c printk(FORE200E "unable to reserve IRQ %s for device %s\n", printk 1967 drivers/atm/fore200e.c printk(FORE200E "IRQ %s reserved for device %s\n", printk 1994 drivers/atm/fore200e.c printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %pM\n", printk 2352 drivers/atm/fore200e.c printk(FORE200E "device %s initialization failed\n", fore200e->name); printk 2356 drivers/atm/fore200e.c printk(FORE200E "device %s initialized\n", fore200e->name); printk 2368 drivers/atm/fore200e.c printk("%c", c); printk 2388 drivers/atm/fore200e.c printk("%c", c & 0xFF); printk 2429 drivers/atm/fore200e.c printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name); printk 2442 drivers/atm/fore200e.c printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name); printk 2460 drivers/atm/fore200e.c printk(FORE200E "device %s firmware didn't start\n", fore200e->name); printk 2464 drivers/atm/fore200e.c printk(FORE200E "device %s firmware started\n", fore200e->name); printk 2484 drivers/atm/fore200e.c printk(FORE200E "unable to register device %s\n", fore200e->name); printk 2647 drivers/atm/fore200e.c printk(FORE200E "device PCA-200E found at 0x%lx, IRQ %s\n", printk 2703 drivers/atm/fore200e.c printk(FORE200E "FORE Systems 200E-series ATM driver - version " FORE200E_VERSION "\n"); printk 88 drivers/atm/he.c #define hprintk(fmt,args...) printk(KERN_ERR DEV_LABEL "%d: " fmt, he_dev->number , ##args) printk 91 drivers/atm/he.c #define HPRINTK(fmt,args...) printk(KERN_DEBUG DEV_LABEL "%d: " fmt, he_dev->number , ##args) printk 358 drivers/atm/he.c printk(KERN_INFO "ATM he driver\n"); printk 363 drivers/atm/he.c printk(KERN_WARNING "he: no suitable dma available\n"); printk 45 drivers/atm/horizon.c printk ("%s version %s\n", description_string, version_string); printk 1830 drivers/atm/horizon.c printk (DEV_LABEL ": Horizon Ultra (at 155.52 MBps)"); printk 1832 drivers/atm/horizon.c printk (DEV_LABEL ": Horizon (at 25 MBps)"); printk 1834 drivers/atm/horizon.c printk (":"); printk 1837 drivers/atm/horizon.c printk (" reset"); printk 1842 drivers/atm/horizon.c printk (" clearing memory"); printk 1847 drivers/atm/horizon.c printk (" tx channels"); printk 1869 drivers/atm/horizon.c printk (" tx buffers"); printk 1885 drivers/atm/horizon.c printk (" rx channels"); printk 1896 drivers/atm/horizon.c printk (" rx buffers"); printk 1937 drivers/atm/horizon.c printk (" control"); printk 1959 drivers/atm/horizon.c printk (" SUNI"); printk 1972 drivers/atm/horizon.c printk (" SAMBA"); printk 1992 drivers/atm/horizon.c printk (" LEDs"); printk 1997 drivers/atm/horizon.c printk (" ESI="); printk 2016 drivers/atm/horizon.c printk ("%02x", esi[i]); printk 2022 drivers/atm/horizon.c printk (" IRQ on"); printk 2024 drivers/atm/horizon.c printk (".\n"); printk 35 drivers/atm/horizon.h printk(severity DEV_LABEL ": " format "\n" , ## args) printk 57 drivers/atm/horizon.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) printk 59 drivers/atm/horizon.h ( (debug & (bits)) ? printk (format , ## args) : 1 ) printk 61 drivers/atm/horizon.h ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) printk 63 drivers/atm/horizon.h ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) printk 28 drivers/atm/idt77105.c #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) printk 130 drivers/atm/idt77105.c printk(KERN_NOTICE "%s(itf %d): signal detected again\n", printk 177 drivers/atm/idt77105.c printk(KERN_NOTICE "%s(%d) Loopback mode is: %s\n", dev->type, printk 191 drivers/atm/idt77105.c printk(KERN_NOTICE "%s(%d) idt77105_ioctl() called\n",dev->type,dev->number); printk 239 drivers/atm/idt77105.c printk(KERN_NOTICE "%s(itf %d): signal lost\n", printk 247 drivers/atm/idt77105.c printk(KERN_NOTICE "%s(itf %d): receive FIFO overrun\n", printk 254 drivers/atm/idt77105.c printk(KERN_NOTICE "%s(itf %d): received cell with error\n", printk 279 drivers/atm/idt77105.c printk(KERN_WARNING "%s(itf %d): no signal\n",dev->type, printk 194 drivers/atm/idt77252.c printk("%s: ERROR: TST JMP section at %08lx written: %08x\n", printk 213 drivers/atm/idt77252.c printk("Error: No such device.\n"); printk 232 drivers/atm/idt77252.c printk("Error: No such device.\n"); printk 356 drivers/atm/idt77252.c printk("RD: %s\n", gp & SAR_GP_EEDI ? "1" : "0"); printk 367 drivers/atm/idt77252.c printk("WR: %s %s %s\n", value & SAR_GP_EECS ? " " : "/CS", printk 539 drivers/atm/idt77252.c printk("%s: TCT %x:", card->name, index); printk 541 drivers/atm/idt77252.c printk(" %08x", read_sram(card, tct + i)); printk 543 drivers/atm/idt77252.c printk("\n"); printk 553 drivers/atm/idt77252.c printk("%s\n", __func__); printk 568 drivers/atm/idt77252.c printk("%s: Connection %d:\n", card->name, vc->index); printk 778 drivers/atm/idt77252.c printk("%s: Error pushing TBD for %d.%d\n", printk 840 drivers/atm/idt77252.c printk("%s: invalid skb->len (%d)\n", card->name, skb->len); printk 872 drivers/atm/idt77252.c printk("%s: Trying to transmit on reserved VC\n", card->name); printk 908 drivers/atm/idt77252.c printk("%s: Traffic type not supported.\n", card->name); printk 977 drivers/atm/idt77252.c printk("%s: can't allocate RSQ.\n", card->name); printk 1030 drivers/atm/idt77252.c printk("%s: NULL skb in %s, rsqe: %08x %08x %08x %08x\n", printk 1045 drivers/atm/idt77252.c printk("%s: SDU received for out-of-range vc %u.%u\n", printk 1053 drivers/atm/idt77252.c printk("%s: SDU received on non RX vc %u.%u\n", printk 1074 drivers/atm/idt77252.c printk("%s: Can't allocate buffers for aal0.\n", printk 1107 drivers/atm/idt77252.c printk("%s: Unexpected AAL type in dequeue_rx(): %d.\n", printk 1273 drivers/atm/idt77252.c printk("%s: raw cell %x.%02x.%04x.%x.%x\n", printk 1280 drivers/atm/idt77252.c printk(" %02x", queue->data[i]); printk 1281 drivers/atm/idt77252.c printk("\n"); printk 1308 drivers/atm/idt77252.c printk("%s: Can't allocate buffers for AAL0.\n", printk 1356 drivers/atm/idt77252.c printk("%s: raw cell queue overrun\n", printk 1379 drivers/atm/idt77252.c printk("%s: can't allocate TSQ.\n", card->name); printk 1443 drivers/atm/idt77252.c printk("%s: Connection %d halted.\n", printk 1452 drivers/atm/idt77252.c printk("%s: could not find VC from conn %d\n", printk 1457 drivers/atm/idt77252.c printk("%s: Connection %d IDLE.\n", printk 1469 drivers/atm/idt77252.c printk("%s: no VC at index %d\n", printk 1487 drivers/atm/idt77252.c printk("%s: TBD complete: " printk 1495 drivers/atm/idt77252.c printk("%s: TBD complete: " printk 1607 drivers/atm/idt77252.c printk("%s: No free TST entries found\n", card->name); printk 1857 drivers/atm/idt77252.c printk("%s: SB POOL full\n", __func__); printk 1867 drivers/atm/idt77252.c printk("%s: FB QUEUE full\n", __func__); printk 1951 drivers/atm/idt77252.c printk("%s: NULL connection in send().\n", card->name); printk 1957 drivers/atm/idt77252.c printk("%s: Trying to transmit on a non-tx VC.\n", card->name); printk 1969 drivers/atm/idt77252.c printk("%s: Unsupported AAL: %d\n", card->name, vcc->qos.aal); printk 1976 drivers/atm/idt77252.c printk("%s: No scatter-gather yet.\n", card->name); printk 2007 drivers/atm/idt77252.c printk("%s: Out of memory in send_oam().\n", card->name); printk 2146 drivers/atm/idt77252.c printk("%s: trying to open a CBR VC with cell rate = 0\n", printk 2172 drivers/atm/idt77252.c printk("%s: no CBR bandwidth free.\n", card->name); printk 2178 drivers/atm/idt77252.c printk("%s: selected CBR bandwidth < granularity.\n", printk 2184 drivers/atm/idt77252.c printk("%s: not enough CBR bandwidth free.\n", card->name); printk 2268 drivers/atm/idt77252.c printk("%s: can't get SCQ.\n", card->name); printk 2274 drivers/atm/idt77252.c printk("%s: no SCD available.\n", card->name); printk 2282 drivers/atm/idt77252.c printk("%s: class %d not supported.\n", printk 2400 drivers/atm/idt77252.c printk("%s: unsupported VPI: %d\n", card->name, vpi); printk 2405 drivers/atm/idt77252.c printk("%s: unsupported VCI: %d\n", card->name, vci); printk 2421 drivers/atm/idt77252.c printk("%s: Unsupported AAL: %d\n", card->name, vcc->qos.aal); printk 2430 drivers/atm/idt77252.c printk("%s: can't alloc vc in open()\n", card->name); printk 2458 drivers/atm/idt77252.c printk("%s: %s vci already in use.\n", card->name, printk 2722 drivers/atm/idt77252.c printk("%s: Re-entering irq_handler()\n", card->name); printk 2861 drivers/atm/idt77252.c printk("%s: can't alloc vc\n", card->name); printk 2928 drivers/atm/idt77252.c printk("%s: can't alloc vc\n", card->name); printk 2936 drivers/atm/idt77252.c printk("%s: can't get SCQ.\n", card->name); printk 2966 drivers/atm/idt77252.c printk("%s: SAR not yet initialized.\n", card->name); printk 2991 drivers/atm/idt77252.c printk("%s: Error initializing OAM.\n", card->name); printk 2996 drivers/atm/idt77252.c printk("%s: Error initializing UBR0.\n", card->name); printk 3043 drivers/atm/idt77252.c printk("%s: SAR not yet initialized.\n", card->name); printk 3264 drivers/atm/idt77252.c printk("Error: SAR already initialized.\n"); printk 3275 drivers/atm/idt77252.c printk("%s: can't read PCI retry timeout.\n", card->name); printk 3283 drivers/atm/idt77252.c printk("%s: can't set PCI retry timeout.\n", printk 3291 drivers/atm/idt77252.c printk("%s: can't read PCI TRDY timeout.\n", card->name); printk 3299 drivers/atm/idt77252.c printk("%s: can't set PCI TRDY timeout.\n", card->name); printk 3306 drivers/atm/idt77252.c printk("%s: resetting timer overflow.\n", card->name); printk 3312 drivers/atm/idt77252.c printk("%s: can't allocate IRQ.\n", card->name); printk 3397 drivers/atm/idt77252.c printk("%s: memory allocation failure.\n", card->name); printk 3409 drivers/atm/idt77252.c printk("%s: memory allocation failure.\n", card->name); printk 3419 drivers/atm/idt77252.c printk("%s: memory allocation failure.\n", card->name); printk 3429 drivers/atm/idt77252.c printk("%s: memory allocation failure.\n", card->name); printk 3439 drivers/atm/idt77252.c printk("%s: No LT device defined.\n", card->name); printk 3444 drivers/atm/idt77252.c printk("%s: LT had no IOCTL function defined.\n", card->name); printk 3463 drivers/atm/idt77252.c printk("%s: Linkrate on ATM line : %u bit/s, %u cell/s.\n", printk 3486 drivers/atm/idt77252.c printk("%s: EEPROM: %02x:", card->name, printk 3490 drivers/atm/idt77252.c printk(" %02x", printk 3494 drivers/atm/idt77252.c printk("\n"); printk 3505 drivers/atm/idt77252.c printk("%s: ESI %pM\n", card->name, card->atmdev->esi); printk 3539 drivers/atm/idt77252.c printk("%s: can't read PCI_COMMAND.\n", card->name); printk 3544 drivers/atm/idt77252.c printk("%s: PCI_COMMAND: %04x (???)\n", printk 3551 drivers/atm/idt77252.c printk("%s: can't write PCI_COMMAND.\n", card->name); printk 3603 drivers/atm/idt77252.c printk("idt77252: can't enable PCI device at %s\n", pci_name(pcidev)); printk 3608 drivers/atm/idt77252.c printk("idt77252: can't enable DMA for PCI device at %s\n", pci_name(pcidev)); printk 3614 drivers/atm/idt77252.c printk("idt77252-%d: can't allocate private data\n", index); printk 3637 drivers/atm/idt77252.c printk("%s: can't ioremap() membase\n", card->name); printk 3643 drivers/atm/idt77252.c printk("%s: preset failed\n", card->name); printk 3651 drivers/atm/idt77252.c printk("%s: can't register atm device\n", card->name); printk 3661 drivers/atm/idt77252.c printk("%s: can't init SUNI\n", card->name); printk 3672 drivers/atm/idt77252.c printk("%s: can't ioremap() FBQ%d\n", card->name, i); printk 3678 drivers/atm/idt77252.c printk("%s: ABR SAR (Rev %c): MEM %08lx SRAM %08lx [%u KB]\n", printk 3684 drivers/atm/idt77252.c printk("%s: init_card failed\n", card->name); printk 3697 drivers/atm/idt77252.c printk("%s: dev_open failed\n", card->name); printk 3744 drivers/atm/idt77252.c printk("%s: at %p\n", __func__, idt77252_init); printk 3748 drivers/atm/idt77252.c printk(KERN_ERR "%s: skb->cb is too small (%lu < %lu)\n", printk 66 drivers/atm/idt77252.h #define CPRINTK(args...) do { if (debug & DBG_CLOSE_CONN) printk(args); } while(0) printk 67 drivers/atm/idt77252.h #define OPRINTK(args...) do { if (debug & DBG_OPEN_CONN) printk(args); } while(0) printk 68 drivers/atm/idt77252.h #define IPRINTK(args...) do { if (debug & DBG_INIT) printk(args); } while(0) printk 69 drivers/atm/idt77252.h #define INTPRINTK(args...) do { if (debug & DBG_INTERRUPT) printk(args); } while(0) printk 70 drivers/atm/idt77252.h #define DIPRINTK(args...) do { if (debug & DBG_DEINIT) printk(args); } while(0) printk 71 drivers/atm/idt77252.h #define TXPRINTK(args...) do { if (debug & DBG_TX_DATA) printk(args); } while(0) printk 72 drivers/atm/idt77252.h #define RXPRINTK(args...) do { if (debug & DBG_RX_DATA) printk(args); } while(0) printk 73 drivers/atm/idt77252.h #define XPRINTK(args...) do { if (debug & DBG_XGENERAL) printk(args); } while(0) printk 74 drivers/atm/idt77252.h #define DPRINTK(args...) do { if (debug & DBG_GENERAL) printk(args); } while(0) printk 75 drivers/atm/idt77252.h #define NPRINTK(args...) do { if (debug & DBG_TINY) printk(args); } while(0) printk 76 drivers/atm/idt77252.h #define RPRINTK(args...) do { if (debug & DBG_RAW_CELL) printk(args); } while(0) printk 152 drivers/atm/iphase.c IF_ABR(printk(" Desc %d is reset at %ld\n", desc1 -1, jiffies);) printk 157 drivers/atm/iphase.c printk("IA: Fatal err in get_desc\n"); printk 162 drivers/atm/iphase.c IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n", printk 167 drivers/atm/iphase.c printk("ia_hack_tcq: No memory available\n"); printk 198 drivers/atm/iphase.c IF_ABR(printk("RECOVER run!! desc_tbl %d = %d delta = %ld, time = %ld\n", i,dev->desc_tbl[i].timestamp, delta, jiffies);) printk 206 drivers/atm/iphase.c printk("Fatal err, desc table vcc or skb is NULL\n"); printk 273 drivers/atm/iphase.c IF_ABR(printk("LOCK UP found\n");) printk 284 drivers/atm/iphase.c IF_ERR(printk("ABR Seg. may not continue on VC %x\n",vcc->vci);) printk 476 drivers/atm/iphase.c IF_ERR(printk("PCR for CBR not defined\n");) printk 481 drivers/atm/iphase.c IF_CBR(printk("CBR: CBR entries=0x%x for rate=0x%x & Gran=0x%x\n", printk 484 drivers/atm/iphase.c IF_CBR(printk("CBR: Bandwidth smaller than granularity of CBR table\n");) printk 490 drivers/atm/iphase.c IF_CBR(printk("CBR: Not enough bandwidth to support this PCR.\n");) printk 491 drivers/atm/iphase.c IF_CBR(printk("Entries = 0x%x, CbrRemEntries = 0x%x.\n", printk 508 drivers/atm/iphase.c IF_CBR(printk("Vci=0x%x,Spacing=0x%x,Sp_mod=0x%x\n",vcIndex,spacing,sp_mod);) printk 533 drivers/atm/iphase.c IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n", printk 542 drivers/atm/iphase.c IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n", printk 552 drivers/atm/iphase.c IF_CBR(printk("TotCbrEntries=%d",dev->CbrTotEntries);) printk 553 drivers/atm/iphase.c IF_CBR(printk(" Testslot=0x%x ToBeAssgned=%d\n", printk 558 drivers/atm/iphase.c IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n", printk 572 drivers/atm/iphase.c IF_CBR(printk("CBR is enabled\n");) printk 586 drivers/atm/iphase.c IF_CBR (printk("CBR support disabled\n");) printk 598 drivers/atm/iphase.c IF_CBR(printk("Exit ia_cbrVc_close, NumRemoved=%d\n",NumFound);) printk 623 drivers/atm/iphase.c printk("ia_que_tx: Null vcc\n"); printk 628 drivers/atm/iphase.c printk("Free the SKB on closed vci %d \n", vcc->vci); printk 649 drivers/atm/iphase.c printk("ia_tx_poll: skb is null\n"); printk 654 drivers/atm/iphase.c printk("ia_tx_poll: vcc is null\n"); printk 661 drivers/atm/iphase.c printk("ia_tx_poll: iavcc is null\n"); printk 669 drivers/atm/iphase.c printk("IA_tx_intr: Vci %d lost pkt!!!\n", vcc->vci); printk 671 drivers/atm/iphase.c IF_ERR(printk("Release the SKB not match\n");) printk 675 drivers/atm/iphase.c IF_EVENT(printk("Transmit Done - skb 0x%lx return\n", printk 683 drivers/atm/iphase.c IF_EVENT(printk("IA: Vci %d - skb not found requed\n",vcc->vci);) printk 690 drivers/atm/iphase.c IF_EVENT(printk("Tx Done - skb 0x%lx return\n",(long)skb);) printk 794 drivers/atm/iphase.c IF_INIT(printk("BUF: tx=%d,sz=%d rx=%d sz= %d rx_pkt_ram=%d\n", printk 808 drivers/atm/iphase.c IF_INIT(printk("memType = 0x%x iadev->phy_type = 0x%x\n", printk 818 drivers/atm/iphase.c IF_INIT(printk("iadev->LineRate = %d \n", iadev->LineRate);) printk 852 drivers/atm/iphase.c printk(KERN_INFO "IA: SUNI carrier %s\n", printk 1004 drivers/atm/iphase.c printk("%s\n", prntBuf); printk 1032 drivers/atm/iphase.c printk("B_tcq_wr = 0x%x desc = %d last desc = %d\n", printk 1035 drivers/atm/iphase.c printk(" host_tcq_wr = 0x%x host_tcq_rd = 0x%x \n", iadev->host_tcq_wr, printk 1039 drivers/atm/iphase.c printk("tcq_st_ptr = 0x%x tcq_ed_ptr = 0x%x \n", tcq_st_ptr, tcq_ed_ptr); printk 1043 drivers/atm/iphase.c printk("TCQ slot %d desc = %d Addr = %p\n", i++, readw(tmp), tmp); printk 1047 drivers/atm/iphase.c printk("Desc_tbl[%d] = %d \n", i, iadev->desc_tbl[i].timestamp); printk 1064 drivers/atm/iphase.c { printk("state = %x \n", state); printk 1066 drivers/atm/iphase.c printk("state = %x excpq_rd_ptr = %x \n", state, excpq_rd_ptr); printk 1068 drivers/atm/iphase.c IF_ERR(printk("excpq_rd_ptr is wrong!!!\n");) printk 1109 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d) Receive queue empty\n", dev->number); printk 1114 drivers/atm/iphase.c IF_RX(printk("reass_ram = %p iadev->rfL.pcq_rd = 0x%x desc = %d\n", printk 1116 drivers/atm/iphase.c printk(" pcq_wr_ptr = 0x%x\n", printk 1134 drivers/atm/iphase.c IF_ERR(printk("IA: bad descriptor desc = %d \n", desc);) printk 1141 drivers/atm/iphase.c printk("IA: null vcc, drop PDU\n"); printk 1151 drivers/atm/iphase.c IF_ERR(printk("IA: bad packet, dropping it");) printk 1153 drivers/atm/iphase.c IF_ERR(printk(" cause: packet CRC error\n");) printk 1156 drivers/atm/iphase.c IF_ERR(printk(" cause: packet time out\n");) printk 1159 drivers/atm/iphase.c IF_ERR(printk(" cause: buffer overflow\n");) printk 1172 drivers/atm/iphase.c printk("Over %d bytes sdu received, dropped!!!\n", iadev->rx_buf_sz); printk 1179 drivers/atm/iphase.c printk("Drop control packets\n"); printk 1217 drivers/atm/iphase.c IF_EVENT(printk("rx_intr: status = 0x%x\n", status);) printk 1227 drivers/atm/iphase.c IF_EVENT(printk("Rx intr status: RX_PKT_RCVD %08x\n", status);) printk 1246 drivers/atm/iphase.c printk("Test logic RUN!!!!\n"); printk 1250 drivers/atm/iphase.c IF_EVENT(printk("Rx intr status: RX_FREEQ_EMPT %08x\n", status);) printk 1256 drivers/atm/iphase.c IF_EVENT(printk("Rx intr status: RX_EXCP_RCVD %08x\n", status);) printk 1266 drivers/atm/iphase.c IF_EVENT(printk("Rx intr status: RX_RAW_RCVD %08x\n", status);) printk 1302 drivers/atm/iphase.c printk("rx_dle_intr: skb len 0\n"); printk 1316 drivers/atm/iphase.c printk("IA: null vcc\n"); printk 1336 drivers/atm/iphase.c IF_ERR(printk("rx_dle_intr: Bad AAL5 trailer %d (skb len %d)", printk 1345 drivers/atm/iphase.c IF_RXPKT(printk("\nDmad Recvd data: len = %d \n", skb->len); printk 1347 drivers/atm/iphase.c printk("\n");) printk 1349 drivers/atm/iphase.c IF_RX(printk("rx_dle_intr: skb push");) printk 1379 drivers/atm/iphase.c IF_EVENT(printk("iadev: open_rx %d.%d\n", vcc->vpi, vcc->vci);) printk 1385 drivers/atm/iphase.c printk("IA: ABR not support\n"); printk 1412 drivers/atm/iphase.c printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %d already open\n", printk 1438 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "can't allocate DLEs\n"); printk 1452 drivers/atm/iphase.c IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n", printk 1455 drivers/atm/iphase.c printk("Rx Dle list addr: 0x%p value: 0x%0x\n", printk 1495 drivers/atm/iphase.c IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);) printk 1512 drivers/atm/iphase.c IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);) printk 1538 drivers/atm/iphase.c IF_INIT(printk("INIT:pcq_st:0x%x pcq_ed:0x%x pcq_rd:0x%x pcq_wr:0x%x", printk 1624 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "itf %d couldn't get free page\n", printk 1669 drivers/atm/iphase.c IF_EVENT(printk("Transmit Done Intr logic run\n");) printk 1679 drivers/atm/iphase.c IF_EVENT(printk("TCQ_NOT_EMPTY int received\n");) printk 1712 drivers/atm/iphase.c printk("tx_dle_intr: vcc is null\n"); printk 1720 drivers/atm/iphase.c printk("tx_dle_intr: iavcc is null\n"); printk 1738 drivers/atm/iphase.c IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);) printk 1753 drivers/atm/iphase.c IF_EVENT(printk("iadev: open_tx entered vcc->vci = %d\n", vcc->vci);) printk 1759 drivers/atm/iphase.c printk("IA: ABR not support\n"); printk 1763 drivers/atm/iphase.c printk("IA: CBR not support\n"); printk 1771 drivers/atm/iphase.c printk("IA: SDU size over (%d) the configured SDU size %d\n", printk 1835 drivers/atm/iphase.c IF_UBR(printk("UBR: txtp.pcr = 0x%x f_rate = 0x%x\n", printk 1840 drivers/atm/iphase.c IF_ABR(printk("Tx ABR VCC\n");) printk 1872 drivers/atm/iphase.c IF_ABR(printk("ABR:vcc->qos.txtp.max_pcr = %d mcr = %d\n", printk 1877 drivers/atm/iphase.c printk("IA: CBR not support\n"); printk 1881 drivers/atm/iphase.c IF_CBR(printk("PCR is not available\n");) printk 1890 drivers/atm/iphase.c printk("iadev: Non UBR, ABR and CBR traffic not supported\n"); printk 1894 drivers/atm/iphase.c IF_EVENT(printk("ia open_tx returning \n");) printk 1918 drivers/atm/iphase.c IF_INIT(printk("Tx MASK REG: 0x%0x\n", printk 1925 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "can't allocate DLEs\n"); printk 1983 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL " couldn't get mem\n"); printk 1992 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL " couldn't get freepage\n"); printk 2005 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL " couldn't get mem\n"); printk 2056 drivers/atm/iphase.c IF_INIT(printk("Start CBR Init\n");) printk 2061 drivers/atm/iphase.c IF_INIT(printk("cbr_ptr_base = 0x%x ", tmp16);) printk 2065 drivers/atm/iphase.c IF_INIT(printk("value in register = 0x%x\n", printk 2069 drivers/atm/iphase.c IF_INIT(printk("cbr_tab_beg = 0x%x in reg = 0x%x \n", tmp16, printk 2074 drivers/atm/iphase.c IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n", printk 2076 drivers/atm/iphase.c IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n", printk 2135 drivers/atm/iphase.c printk("Get freepage failed\n"); printk 2234 drivers/atm/iphase.c IF_EVENT(printk("ia_int: status = 0x%x\n", status);) printk 2238 drivers/atm/iphase.c IF_EVENT(printk("REASSINT Bus status reg: %08x\n", status);) printk 2250 drivers/atm/iphase.c IF_EVENT(printk("IA: tx_intr \n");) printk 2281 drivers/atm/iphase.c IF_INIT(printk("ESI: 0x%08x%04x\n", mac1, mac2);) printk 2323 drivers/atm/iphase.c IF_INIT(printk(">ia_init\n");) printk 2333 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n", printk 2337 drivers/atm/iphase.c IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n", printk 2354 drivers/atm/iphase.c printk("Unknown pci_map_size = 0x%x\n", iadev->pci_map_size); printk 2357 drivers/atm/iphase.c IF_INIT(printk (DEV_LABEL "map size: %i\n", iadev->pci_map_size);) printk 2372 drivers/atm/iphase.c printk(DEV_LABEL " (itf %d): can't set up page mapping\n", printk 2376 drivers/atm/iphase.c IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n", printk 2399 drivers/atm/iphase.c IF_INIT(printk("Base addrs: %p %p %p \n %p %p %p %p\n", printk 2410 drivers/atm/iphase.c printk("IA: "); printk 2412 drivers/atm/iphase.c printk("%s%02X",i ? "-" : "",dev->esi[i]); printk 2413 drivers/atm/iphase.c printk("\n"); printk 2418 drivers/atm/iphase.c printk("IA: reset SAR fail, please try again\n"); printk 2510 drivers/atm/iphase.c IF_EVENT(printk(">ia_start\n");) printk 2513 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", printk 2524 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory+" printk 2534 drivers/atm/iphase.c IF_INIT(printk("Bus ctrl reg: %08x\n", printk 2554 drivers/atm/iphase.c IF_INIT(printk("Bus ctrl reg after initializing: %08x\n", printk 2556 drivers/atm/iphase.c printk("Bus status reg after init: %08x\n", printk 2569 drivers/atm/iphase.c IF_INIT(printk("Bus ctrl reg after initializing: %08x\n", printk 2574 drivers/atm/iphase.c printk("IA: pm5346,rev.%d\n",phy&0x0f); printk 2576 drivers/atm/iphase.c printk("IA: utopia,rev.%0x\n",phy);) printk 2620 drivers/atm/iphase.c IF_EVENT(printk("ia_close: ia_vcc->vc_desc_cnt = %d vci = %d\n", printk 2641 drivers/atm/iphase.c IF_EVENT(printk("IA TX Done decs_cnt = %d\n", ia_vcc->vc_desc_cnt);) printk 2697 drivers/atm/iphase.c IF_EVENT(printk("ia: not partially allocated resources\n");) printk 2702 drivers/atm/iphase.c IF_EVENT(printk("iphase open: unspec part\n");) printk 2707 drivers/atm/iphase.c IF_EVENT(printk(DEV_LABEL "(itf %d): open %d.%d\n", printk 2717 drivers/atm/iphase.c IF_EVENT(printk("iadev: error in open_rx, closing\n");) printk 2724 drivers/atm/iphase.c IF_EVENT(printk("iadev: error in open_tx, closing\n");) printk 2741 drivers/atm/iphase.c IF_EVENT(printk("ia open returning\n");) printk 2747 drivers/atm/iphase.c IF_EVENT(printk(">ia_change_qos\n");) printk 2757 drivers/atm/iphase.c IF_EVENT(printk(">ia_ioctl\n");) printk 2813 drivers/atm/iphase.c printk("Board %d registers dumped\n", board); printk 2827 drivers/atm/iphase.c printk("skb = 0x%p\n", skb_peek(&iadev->tx_backlog)); printk 2828 drivers/atm/iphase.c printk("rtn_q: 0x%p\n",ia_deque_rtn_q(&iadev->tx_return_q)); printk 2835 drivers/atm/iphase.c printk("section_bip: %d\n", atomic_read(&stats->section_bip)); printk 2836 drivers/atm/iphase.c printk("line_bip : %d\n", atomic_read(&stats->line_bip)); printk 2837 drivers/atm/iphase.c printk("path_bip : %d\n", atomic_read(&stats->path_bip)); printk 2838 drivers/atm/iphase.c printk("line_febe : %d\n", atomic_read(&stats->line_febe)); printk 2839 drivers/atm/iphase.c printk("path_febe : %d\n", atomic_read(&stats->path_febe)); printk 2840 drivers/atm/iphase.c printk("corr_hcs : %d\n", atomic_read(&stats->corr_hcs)); printk 2841 drivers/atm/iphase.c printk("uncorr_hcs : %d\n", atomic_read(&stats->uncorr_hcs)); printk 2842 drivers/atm/iphase.c printk("tx_cells : %d\n", atomic_read(&stats->tx_cells)); printk 2843 drivers/atm/iphase.c printk("rx_cells : %d\n", atomic_read(&stats->rx_cells)); printk 2867 drivers/atm/iphase.c printk("New debug option loaded\n"); printk 2886 drivers/atm/iphase.c IF_EVENT(printk(">ia_getsockopt\n");) printk 2893 drivers/atm/iphase.c IF_EVENT(printk(">ia_setsockopt\n");) printk 2910 drivers/atm/iphase.c printk("discard packet on closed VC\n"); printk 2919 drivers/atm/iphase.c printk("Transmit size over tx buffer size\n"); printk 2927 drivers/atm/iphase.c printk("Misaligned SKB\n"); printk 2947 drivers/atm/iphase.c IF_ERR(printk(DEV_LABEL "invalid desc for send: %d\n", desc);) printk 2958 drivers/atm/iphase.c IF_ERR(printk(DEV_LABEL "send desc:%d completion code %d error\n", printk 2986 drivers/atm/iphase.c IF_TX(printk("ia packet len:%d padding:%d\n", total_len, total_len - skb->len);) printk 2990 drivers/atm/iphase.c IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n", printk 2998 drivers/atm/iphase.c IF_TXPKT(printk("Sent data: len = %d MsgNum = %d\n", printk 3001 drivers/atm/iphase.c printk("\n");) printk 3063 drivers/atm/iphase.c printk("Tx1: vcc->tx_quota = %d \n", (u32)vcc->tx_quota ); printk 3068 drivers/atm/iphase.c printk("Tx2: vcc->tx_quota = %d \n", (u32)vcc->tx_quota ); printk 3073 drivers/atm/iphase.c IF_TX(printk("ia send done\n");) printk 3086 drivers/atm/iphase.c printk(KERN_CRIT "null skb in ia_send\n"); printk 3191 drivers/atm/iphase.c IF_INIT(printk("ia detected at bus:%d dev: %d function:%d\n", printk 3203 drivers/atm/iphase.c IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);) printk 3204 drivers/atm/iphase.c IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev, printk 3213 drivers/atm/iphase.c IF_INIT(printk("IA register failed!\n");) printk 3220 drivers/atm/iphase.c IF_EVENT(printk("iadev_count = %d\n", iadev_count);) printk 3255 drivers/atm/iphase.c IF_EVENT(printk("deregistering iav at (itf:%d)\n", dev->number);) printk 3290 drivers/atm/iphase.c printk(KERN_ERR DEV_LABEL ": no adapter found\n"); printk 165 drivers/atm/lanai.c printk(KERN_DEBUG DEV_LABEL ": " format, ##args) printk 169 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": " format, ##args); \ printk 181 drivers/atm/lanai.c printk(KERN_DEBUG DEV_LABEL ": " format, ##args) printk 559 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL printk 798 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on " printk 853 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n", printk 924 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n", printk 967 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad " printk 974 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum " printk 982 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL printk 994 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers " printk 1004 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers " printk 1011 drivers/atm/lanai.c printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM " printk 1072 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n", printk 1093 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name); printk 1102 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: " printk 1113 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: " printk 1258 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): butt register " printk 1349 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL printk 1356 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n"); printk 1401 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length " printk 1425 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n"); printk 1491 drivers/atm/lanai.c printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes " printk 1563 drivers/atm/lanai.c printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not " printk 1684 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream " printk 1826 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA " printk 1835 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n", printk 1843 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n", printk 1848 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " printk 1855 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " printk 1920 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a " printk 1937 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable " printk 1943 drivers/atm/lanai.c printk(KERN_WARNING DEV_LABEL printk 1953 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL "(itf %d): can't write " printk 2139 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n"); printk 2199 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n"); printk 2217 drivers/atm/lanai.c printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u " printk 2220 drivers/atm/lanai.c printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), " printk 2249 drivers/atm/lanai.c printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n", printk 2560 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL printk 2567 drivers/atm/lanai.c printk(KERN_ERR DEV_LABEL printk 80 drivers/atm/nicstar.c #define TXPRINTK(args...) printk(args) printk 86 drivers/atm/nicstar.c #define RXPRINTK(args...) printk(args) printk 92 drivers/atm/nicstar.c #define PRINTK(args...) printk(args) printk 98 drivers/atm/nicstar.c #define XPRINTK(args...) printk(args) printk 283 drivers/atm/nicstar.c printk("nicstar: using PHY loopback.\n"); printk 359 drivers/atm/nicstar.c printk("nicstar%d: can't enable PCI device\n", i); printk 365 drivers/atm/nicstar.c printk(KERN_WARNING printk 374 drivers/atm/nicstar.c printk printk 393 drivers/atm/nicstar.c printk("nicstar%d: can't ioremap() membase.\n", i); printk 403 drivers/atm/nicstar.c printk("nicstar%d: can't read PCI latency timer.\n", i); printk 418 drivers/atm/nicstar.c printk printk 454 drivers/atm/nicstar.c printk("nicstar%d: PHY seems to be 25 Mbps.\n", i); printk 469 drivers/atm/nicstar.c printk("nicstar%d: PHY seems to be 155 Mbps.\n", i); printk 478 drivers/atm/nicstar.c printk("nicstar%d: unknown PHY type (0x%08X).\n", i, data); printk 501 drivers/atm/nicstar.c printk printk 506 drivers/atm/nicstar.c printk printk 533 drivers/atm/nicstar.c printk("nicstar%d: can't allocate TSQ.\n", i); printk 552 drivers/atm/nicstar.c printk("nicstar%d: can't allocate RSQ.\n", i); printk 571 drivers/atm/nicstar.c printk("nicstar%d: can't get SCQ0.\n", i); printk 649 drivers/atm/nicstar.c printk printk 668 drivers/atm/nicstar.c printk printk 689 drivers/atm/nicstar.c printk printk 704 drivers/atm/nicstar.c printk printk 719 drivers/atm/nicstar.c printk printk 734 drivers/atm/nicstar.c printk printk 757 drivers/atm/nicstar.c printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq); printk 767 drivers/atm/nicstar.c printk("nicstar%d: can't register device.\n", i); printk 783 drivers/atm/nicstar.c printk("nicstar%d: MAC address %pM\n", i, card->atmdev->esi); printk 918 drivers/atm/nicstar.c printk printk 963 drivers/atm/nicstar.c printk("nicstar%d: push_rxbufs called with addr1 = 0.\n", printk 1112 drivers/atm/nicstar.c printk("nicstar%d: Small free buffer queue is full.\n", printk 1119 drivers/atm/nicstar.c printk("nicstar%d: Large free buffer queue is full.\n", printk 1126 drivers/atm/nicstar.c printk("nicstar%d: RSQ full.\n", card->index); printk 1141 drivers/atm/nicstar.c printk("nicstar%d: Raw cell received and no support yet...\n", printk 1172 drivers/atm/nicstar.c printk("nicstar%d: Small free buffer queue empty.\n", printk 1197 drivers/atm/nicstar.c printk("nicstar%d: Large free buffer queue empty.\n", printk 1262 drivers/atm/nicstar.c printk("nicstar%d: %s vci already in use.\n", card->index, printk 1317 drivers/atm/nicstar.c printk printk 1553 drivers/atm/nicstar.c printk("STAT = 0x%08X CFG = 0x%08X \n", stat, cfg); printk 1554 drivers/atm/nicstar.c printk printk 1558 drivers/atm/nicstar.c printk printk 1562 drivers/atm/nicstar.c printk("Empty free buffer queue interrupt %s \n", printk 1564 drivers/atm/nicstar.c printk("SBCNT = %d count = %d LBCNT = %d count = %d \n", printk 1567 drivers/atm/nicstar.c printk("hbpool.count = %d iovpool.count = %d \n", printk 1593 drivers/atm/nicstar.c printk("nicstar%d: No free TST entries found. \n", card->index); printk 1635 drivers/atm/nicstar.c printk("nicstar%d: vcc->dev_data == NULL on ns_send().\n", printk 1643 drivers/atm/nicstar.c printk("nicstar%d: Trying to transmit on a non-tx VC.\n", printk 1651 drivers/atm/nicstar.c printk("nicstar%d: Only AAL0 and AAL5 are supported.\n", printk 1659 drivers/atm/nicstar.c printk("nicstar%d: No scatter-gather yet.\n", card->index); printk 1731 drivers/atm/nicstar.c printk("nicstar%d: Error pushing TBD.\n", card->index); printk 1743 drivers/atm/nicstar.c printk("nicstar%d: Timeout pushing TBD.\n", printk 1778 drivers/atm/nicstar.c printk("nicstar%d: Error pushing TSR.\n", printk 1868 drivers/atm/nicstar.c printk printk 1914 drivers/atm/nicstar.c printk("nicstar%d: Bad index on drain_scq().\n", card->index); printk 2001 drivers/atm/nicstar.c printk("nicstar%d: SDU received for out-of-range vc %d.%d.\n", printk 2026 drivers/atm/nicstar.c printk printk 2066 drivers/atm/nicstar.c printk("nicstar%d: Out of iovec buffers.\n", printk 2091 drivers/atm/nicstar.c printk("nicstar%d: received too big AAL5 SDU.\n", card->index); printk 2108 drivers/atm/nicstar.c printk printk 2121 drivers/atm/nicstar.c printk printk 2143 drivers/atm/nicstar.c printk("nicstar%d: AAL5 CRC error", card->index); printk 2145 drivers/atm/nicstar.c printk(" - PDU size mismatch.\n"); printk 2147 drivers/atm/nicstar.c printk(".\n"); printk 2224 drivers/atm/nicstar.c printk printk 2305 drivers/atm/nicstar.c printk printk 2325 drivers/atm/nicstar.c printk("nicstar%d: What kind of rx buffer is this?\n", printk 2608 drivers/atm/nicstar.c printk printk 2638 drivers/atm/nicstar.c printk printk 2669 drivers/atm/nicstar.c printk("nicstar%d: %s == NULL \n", card->index, printk 2679 drivers/atm/nicstar.c printk("skb buf_type: 0x%08x\n", NS_PRV_BUFTYPE(skb)); printk 1015 drivers/atm/solos-pci.c printk(KERN_DEBUG "%s", msg); printk 1021 drivers/atm/solos-pci.c printk(KERN_DEBUG "%s", msg); printk 1023 drivers/atm/solos-pci.c printk(KERN_DEBUG "\n"); printk 1487 drivers/atm/solos-pci.c printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION); printk 1494 drivers/atm/solos-pci.c printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION); printk 34 drivers/atm/suni.c #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) printk 303 drivers/atm/suni.c printk(KERN_NOTICE "%s(itf %d): signal %s\n",dev->type,dev->number, printk 323 drivers/atm/suni.c printk(KERN_WARNING "%s(itf %d): no signal\n",dev->type, printk 332 drivers/atm/suni.c printk(KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n",(unsigned long) poll_timer.list.prev, printk 21 drivers/atm/uPD98402.c #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) printk 193 drivers/atm/uPD98402.c printk(KERN_NOTICE "%s(itf %d): signal lost\n", printk 203 drivers/atm/uPD98402.c printk(KERN_WARNING "%s(itf %d): uPD98402 receive " printk 54 drivers/atm/zatm.c #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args) printk 80 drivers/atm/zatm.c if ((unsigned long) (x) < 0x30) printk(KERN_CRIT #x "==0x%x\n", (int) (x)) printk 107 drivers/atm/zatm.c printk(KERN_NOTICE "----- event dump follows -----\n"); printk 110 drivers/atm/zatm.c printk(KERN_NOTICE); printk 111 drivers/atm/zatm.c printk(ev[i] ? ev[i] : "(null)",ev_a[i],ev_b[i]); printk 113 drivers/atm/zatm.c printk(KERN_NOTICE "----- event dump ends here -----\n"); printk 218 drivers/atm/zatm.c printk(KERN_WARNING DEV_LABEL "(Itf %d): got no new " printk 269 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL ": driver error in pool_index: " printk 328 drivers/atm/zatm.c printk("TX%d: 0x%08lx\n",i, printk 331 drivers/atm/zatm.c printk("SH%d: 0x%08lx\n",i, printk 335 drivers/atm/zatm.c printk("qrp=0x%08lx\n",(unsigned long) qrp); printk 336 drivers/atm/zatm.c for (i = 0; i < 4; i++) printk("QRP[%d]: 0x%08lx",i,qrp[i]); printk 383 drivers/atm/zatm.c printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]); printk 386 drivers/atm/zatm.c printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev, printk 390 drivers/atm/zatm.c printk("[0..3] = 0x%08lx, 0x%08lx, 0x%08lx, 0x%08lx\n", printk 406 drivers/atm/zatm.c printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3], printk 413 drivers/atm/zatm.c printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]); printk 429 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): RX indication " printk 441 drivers/atm/zatm.c printk(KERN_WARNING DEV_LABEL "(itf %d): " printk 451 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): size %d with %d " printk 457 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): size too big " printk 591 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel " printk 667 drivers/atm/zatm.c printk("NONONONOO!!!!\n"); printk 721 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): dequeue_tx but not " printk 727 drivers/atm/zatm.c uPD98401_TXPD_SM | uPD98401_TXPD_AAL5)) printk("@#*$!!!! (%08x)\n", printk 774 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): TX indication " printk 831 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "shaper algorithm botched " printk 884 drivers/atm/zatm.c printk("waiting for backlog to drain ...\n"); printk 889 drivers/atm/zatm.c printk("waiting for TX queue to drain ...\n"); printk 902 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel " printk 1055 drivers/atm/zatm.c printk(KERN_WARNING DEV_LABEL "(itf %d): RQU 0x%08lx\n", printk 1068 drivers/atm/zatm.c printk(KERN_ALERT DEV_LABEL "(itf %d): system parity " printk 1071 drivers/atm/zatm.c printk(KERN_ALERT DEV_LABEL "(itf %d): control memory " printk 1074 drivers/atm/zatm.c printk(KERN_ALERT DEV_LABEL "(itf %d): system bus " printk 1080 drivers/atm/zatm.c printk(KERN_CRIT DEV_LABEL "(itf %d): mailbox full " printk 1107 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL ": PCI write failed (0x%02x)\n", printk 1118 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL ": PCI read failed (0x%02x)\n", printk 1201 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n", printk 1207 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): can't enable IO (0x%02x)" printk 1212 drivers/atm/zatm.c printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,", printk 1238 drivers/atm/zatm.c printk("mem=%dkB,%s (",zatm_dev->mem >> 10,zatm_dev->copper ? "UTP" : printk 1241 drivers/atm/zatm.c printk("%02X%s",dev->esi[i],i == ESI_LEN-1 ? ")\n" : "-"); printk 1255 drivers/atm/zatm.c printk(KERN_NOTICE DEV_LABEL "(itf %d): uPD98401 %d.%d at %d.%03d " printk 1277 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n", printk 1303 drivers/atm/zatm.c printk(KERN_INFO DEV_LABEL "(itf %d): %d shapers, %d pools, %d RX, " printk 1324 drivers/atm/zatm.c printk(KERN_ERR DEV_LABEL "(itf %d): system " printk 1435 drivers/atm/zatm.c printk("Not yet implemented\n"); printk 1543 drivers/atm/zatm.c printk(KERN_CRIT "!skb in zatm_send ?\n"); printk 1602 drivers/atm/zatm.c printk(KERN_EMERG "%s: memory shortage\n", DEV_LABEL); printk 322 drivers/auxdisplay/cfag12864b.c printk(KERN_ERR CFAG12864B_NAME ": ERROR: " printk 330 drivers/auxdisplay/cfag12864b.c printk(KERN_ERR CFAG12864B_NAME ": ERROR: " printk 339 drivers/auxdisplay/cfag12864b.c printk(KERN_ERR CFAG12864B_NAME ": ERROR: " printk 131 drivers/auxdisplay/cfag12864bfb.c printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: " printk 137 drivers/auxdisplay/cfag12864bfb.c printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: " printk 629 drivers/base/bus.c printk(KERN_ERR "%s: uevent attr (%s) failed\n", printk 635 drivers/base/bus.c printk(KERN_ERR "%s: driver_create_groups(%s) failed\n", printk 643 drivers/base/bus.c printk(KERN_ERR "%s: add_bind_files(%s) failed\n", printk 970 drivers/base/core.c printk("dev_attr_show: %pS returned bad count\n", printk 3341 drivers/base/core.c printk("%s(NULL device *): %pV", level, vaf); printk 370 drivers/base/dd.c printk(KERN_WARNING "%s: device %s already bound\n", printk 539 drivers/base/dd.c printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n", printk 631 drivers/base/dd.c printk(KERN_WARNING printk 658 drivers/base/dd.c printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n", printk 743 drivers/base/dd.c printk(KERN_WARNING printk 374 drivers/base/devtmpfs.c printk(KERN_INFO "devtmpfs: error mounting %i\n", err); printk 376 drivers/base/devtmpfs.c printk(KERN_INFO "devtmpfs: mounted\n"); printk 439 drivers/base/devtmpfs.c printk(KERN_ERR "devtmpfs: unable to create devtmpfs %ld\n", printk 445 drivers/base/devtmpfs.c printk(KERN_ERR "devtmpfs: unable to register devtmpfs " printk 459 drivers/base/devtmpfs.c printk(KERN_ERR "devtmpfs: unable to create devtmpfs %i\n", err); printk 464 drivers/base/devtmpfs.c printk(KERN_INFO "devtmpfs: initialized\n"); printk 160 drivers/base/driver.c printk(KERN_WARNING "Driver '%s' needs updating - please use " printk 165 drivers/base/driver.c printk(KERN_ERR "Error: Driver '%s' is already registered, " printk 370 drivers/block/amiflop.c printk("get_fdc: drive %d fdc_busy %d fdc_nested %d\n",drive,fdc_busy,fdc_nested); printk 383 drivers/block/amiflop.c printk("fd: unmatched rel_fdc\n"); printk 384 drivers/block/amiflop.c printk("rel_fdc: fdc_busy %d fdc_nested %d\n",fdc_busy,fdc_nested); printk 399 drivers/block/amiflop.c printk("selecting %d\n",drive); printk 424 drivers/block/amiflop.c printk("deselecting %d\n",drive); printk 427 drivers/block/amiflop.c printk(KERN_WARNING "Deselecting drive %d while %d was selected!\n",drive,selected); printk 476 drivers/block/amiflop.c printk (KERN_ERR "motor_on failed, turning motor off\n"); printk 480 drivers/block/amiflop.c printk (KERN_WARNING "DSKRDY not set after 1.5 seconds - assuming drive is spinning notwithstanding\n"); printk 551 drivers/block/amiflop.c printk (KERN_ERR "fd%d: calibrate failed, turning motor off\n", drive); printk 572 drivers/block/amiflop.c printk("seeking drive %d to track %d\n",drive,track); printk 667 drivers/block/amiflop.c printk(KERN_NOTICE "fd: drive 0 didn't identify, setting default %08lx\n", (ulong)fd_def_df0); printk 755 drivers/block/amiflop.c printk("post_write for drive %ld\n",drive); printk 849 drivers/block/amiflop.c printk (KERN_INFO "can't find sync for sector %d\n", scnt); printk 861 drivers/block/amiflop.c printk ("(%x,%d,%d,%d) (%lx,%lx,%lx,%lx) %lx %lx\n", printk 869 drivers/block/amiflop.c printk(KERN_INFO "MFM_HEADER: %08lx,%08lx\n", hdr.hdrchk, csum); printk 875 drivers/block/amiflop.c printk(KERN_INFO "MFM_TRACK: %d, %d\n", hdr.track, unit[drive].track); printk 884 drivers/block/amiflop.c printk(KERN_INFO "MFM_DATA: (%x:%d:%d:%d) sc=%d %lx, %lx\n", printk 887 drivers/block/amiflop.c printk (KERN_INFO "data=(%lx,%lx,%lx,%lx)\n", printk 1144 drivers/block/amiflop.c printk("raw data @%08lx: %08lx, %08lx ,%08lx, %08lx\n", ptr, printk 1165 drivers/block/amiflop.c printk(KERN_INFO "dos_read: no hdr sync on " printk 1179 drivers/block/amiflop.c printk("(%3d,%d,%2d,%d) %x\n", hdr.track, hdr.side, printk 1184 drivers/block/amiflop.c printk(KERN_INFO "dos_read: MFM_HEADER %04x,%04x\n", printk 1189 drivers/block/amiflop.c printk(KERN_INFO "dos_read: MFM_TRACK %d, %d\n", printk 1196 drivers/block/amiflop.c printk(KERN_INFO "dos_read: MFM_SIDE %d, %d\n", printk 1203 drivers/block/amiflop.c printk(KERN_INFO "dos_read: unknown sector len " printk 1208 drivers/block/amiflop.c printk("hdr accepted\n"); printk 1211 drivers/block/amiflop.c printk(KERN_INFO "dos_read: no data sync on track " printk 1221 drivers/block/amiflop.c printk(KERN_INFO "dos_read: no data mark after " printk 1233 drivers/block/amiflop.c printk(KERN_INFO "dos_read: MFM_DATA (%d,%d,%d,%d) " printk 1236 drivers/block/amiflop.c printk(KERN_INFO "data=(%lx,%lx,%lx,%lx,...)\n", printk 1382 drivers/block/amiflop.c printk (KERN_NOTICE "floppy disk write protected\n"); printk 1407 drivers/block/amiflop.c printk (KERN_NOTICE "floppy disk write protected " printk 1467 drivers/block/amiflop.c printk("fd: sector %ld + %d requested for %s\n", printk 1476 drivers/block/amiflop.c printk("access to track %d, sector %d, with buffer at " printk 1637 drivers/block/amiflop.c printk(KERN_WARNING "fd_probe: unsupported drive type " printk 1700 drivers/block/amiflop.c printk(KERN_INFO "fd%d: accessing %s-disk with %s-layout\n",drive, printk 1719 drivers/block/amiflop.c printk(KERN_CRIT "floppy_release with fd_ref == 0"); printk 1868 drivers/block/amiflop.c printk("fd: cannot get chip mem buffer\n"); printk 1874 drivers/block/amiflop.c printk("fd: cannot get irq for dma\n"); printk 1879 drivers/block/amiflop.c printk("fd: cannot get irq for timer\n"); printk 1949 drivers/block/amiflop.c printk (KERN_INFO "amiflop: Setting default df0 to %x\n", n); printk 290 drivers/block/aoe/aoeblk.c printk(KERN_ERR "aoe: disk not up\n"); printk 375 drivers/block/aoe/aoeblk.c printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%d\n", printk 72 drivers/block/aoe/aoechr.c printk(KERN_ERR printk 144 drivers/block/aoe/aoechr.c printk(KERN_ERR "aoe: allocation failure, len=%ld\n", n); printk 168 drivers/block/aoe/aoechr.c printk(KERN_INFO "aoe: can't write to that file.\n"); printk 290 drivers/block/aoe/aoechr.c printk(KERN_ERR "aoe: can't register char device\n"); printk 259 drivers/block/aoe/aoecmd.c printk(KERN_ERR "aoe: NULL TARGETS!\n"); printk 428 drivers/block/aoe/aoecmd.c printk(KERN_INFO "aoe: skb alloc failure\n"); printk 967 drivers/block/aoe/aoecmd.c printk(KERN_INFO printk 1546 drivers/block/aoe/aoecmd.c printk(KERN_ERR "aoe: Warning: shelf address is all ones. " printk 415 drivers/block/aoe/aoedev.c printk(KERN_ERR printk 62 drivers/block/aoe/aoemain.c printk(KERN_ERR "aoe: can't register major\n"); printk 65 drivers/block/aoe/aoemain.c printk(KERN_INFO "aoe: AoE v%s initialised.\n", VERSION); printk 81 drivers/block/aoe/aoemain.c printk(KERN_INFO "aoe: initialisation failure.\n"); printk 105 drivers/block/aoe/aoenet.c printk(KERN_INFO "aoe: copy from user failed\n"); printk 163 drivers/block/aoe/aoenet.c printk(KERN_ERR printk 412 drivers/block/ataflop.c #define DPRINT(a) printk a printk 701 drivers/block/ataflop.c printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive ); printk 705 drivers/block/ataflop.c printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive ); printk 882 drivers/block/ataflop.c printk(KERN_ERR "fd%d: restore failed\n", SelectedDrive ); printk 930 drivers/block/ataflop.c printk(KERN_ERR "fd%d: seek error (to track %d)\n", printk 1138 drivers/block/ataflop.c printk(KERN_ERR "fd%d: DMA error\n", SelectedDrive ); printk 1145 drivers/block/ataflop.c printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive ); printk 1164 drivers/block/ataflop.c printk(KERN_INFO "fd%d: Auto-detected floppy type %s\n", printk 1188 drivers/block/ataflop.c printk(KERN_ERR "fd%d: sector %d not found (side %d, track %d)\n", printk 1193 drivers/block/ataflop.c printk(KERN_ERR "fd%d: CRC error (side %d, track %d, sector %d)\n", printk 1198 drivers/block/ataflop.c printk(KERN_ERR "fd%d: lost data (side %d, track %d, sector %d)\n", printk 1304 drivers/block/ataflop.c printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive ); printk 1308 drivers/block/ataflop.c printk(KERN_ERR "fd%d: lost data (side %d, track %d)\n", printk 1334 drivers/block/ataflop.c printk(KERN_ERR "floppy timeout\n" ); printk 1438 drivers/block/ataflop.c printk(KERN_ERR "floppy: clear format %p!\n", UDT); printk 1509 drivers/block/ataflop.c printk(KERN_ERR "Unknown Device: fd%d\n", drive ); printk 1525 drivers/block/ataflop.c printk(KERN_WARNING "fd%d: invalid disk format", drive ); printk 1530 drivers/block/ataflop.c printk(KERN_WARNING "fd%d: unsupported disk format", drive ); printk 1583 drivers/block/ataflop.c printk (KERN_ERR "floppy%d: found dtp %p name %s!\n", printk 1628 drivers/block/ataflop.c printk (KERN_INFO "floppy%d: setting size %d spt %d str %d!\n", printk 1658 drivers/block/ataflop.c printk (KERN_INFO "floppy%d: setting %s %p!\n", printk 1696 drivers/block/ataflop.c printk (KERN_INFO "floppy%d: blk %d spt %d str %d!\n", printk 1854 drivers/block/ataflop.c printk(KERN_INFO "Probing floppy drive(s):\n"); printk 1858 drivers/block/ataflop.c printk(KERN_INFO "fd%d\n", drive); printk 1944 drivers/block/ataflop.c printk(KERN_ERR "floppy_release with fd_ref == 0"); printk 2017 drivers/block/ataflop.c printk(KERN_ERR "atari_floppy_init: cannot get dma buffer\n"); printk 2042 drivers/block/ataflop.c printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n", printk 2074 drivers/block/ataflop.c printk(KERN_ERR "ataflop_setup: no arguments!\n" ); printk 2078 drivers/block/ataflop.c printk(KERN_ERR "ataflop_setup: too many arguments\n" ); printk 2082 drivers/block/ataflop.c printk(KERN_ERR "ataflop_setup: bad drive type\n" ); printk 2091 drivers/block/ataflop.c printk(KERN_ERR "ataflop_setup: bad steprate\n" ); printk 172 drivers/block/cryptoloop.c printk(KERN_ERR "cryptoloop_release(): tfm == NULL?\n"); printk 191 drivers/block/cryptoloop.c printk(KERN_ERR "cryptoloop: loop_register_transfer failed\n"); printk 199 drivers/block/cryptoloop.c printk(KERN_ERR printk 84 drivers/block/drbd/drbd_int.h printk(level "drbd %s: " fmt, (resource)->name, ## args) printk 86 drivers/block/drbd/drbd_int.h printk(level "drbd %s: " fmt, (connection)->resource->name, ## args) printk 2305 drivers/block/loop.c printk(KERN_INFO "loop: module loaded\n"); printk 112 drivers/block/mtip32xx/mtip32xx.h printk(pr_fmt(format), ##arg); printk 1799 drivers/block/nbd.c printk(KERN_ERR "Invalid block size %llu\n", bsize); printk 1824 drivers/block/nbd.c printk(KERN_ERR "nbd: must specify at least one socket\n"); printk 1828 drivers/block/nbd.c printk(KERN_ERR "nbd: must specify a size in bytes for the device\n"); printk 1840 drivers/block/nbd.c printk(KERN_ERR "nbd: failed to add new device\n"); printk 1851 drivers/block/nbd.c printk(KERN_ERR "nbd: failed to add new device\n"); printk 1858 drivers/block/nbd.c printk(KERN_ERR "nbd: couldn't find device at index %d\n", printk 1878 drivers/block/nbd.c printk(KERN_ERR "nbd: device at index %d is going down\n", printk 1890 drivers/block/nbd.c printk(KERN_ERR "nbd: nbd%d already in use\n", index); printk 1902 drivers/block/nbd.c printk(KERN_ERR "nbd: couldn't allocate config\n"); printk 1948 drivers/block/nbd.c printk(KERN_ERR "nbd: socks must be embedded in a SOCK_ITEM attr\n"); printk 1957 drivers/block/nbd.c printk(KERN_ERR "nbd: error processing sock list\n"); printk 2009 drivers/block/nbd.c printk(KERN_ERR "nbd: must specify an index to disconnect\n"); printk 2017 drivers/block/nbd.c printk(KERN_ERR "nbd: couldn't find device at index %d\n", printk 2023 drivers/block/nbd.c printk(KERN_ERR "nbd: device at index %d is going down\n", printk 2050 drivers/block/nbd.c printk(KERN_ERR "nbd: must specify a device to reconfigure\n"); printk 2058 drivers/block/nbd.c printk(KERN_ERR "nbd: couldn't find a device at index %d\n", printk 2064 drivers/block/nbd.c printk(KERN_ERR "nbd: device at index %d is going down\n", printk 2131 drivers/block/nbd.c printk(KERN_ERR "nbd: socks must be embedded in a SOCK_ITEM attr\n"); printk 2140 drivers/block/nbd.c printk(KERN_ERR "nbd: error processing sock list\n"); printk 2357 drivers/block/nbd.c printk(KERN_ERR "nbd: max_part must be >= 0\n"); printk 2422 drivers/block/nbd.c printk(KERN_ERR "nbd: possibly leaking a device\n"); printk 127 drivers/block/paride/aten.c printk("%s: aten %s, ATEN EH-100 at 0x%x, ", printk 129 drivers/block/paride/aten.c printk("mode %d (%s), delay %d\n",pi->mode, printk 337 drivers/block/paride/bpck.c printk("%s: bpck: 0x%x unit %d mode %d: ", printk 339 drivers/block/paride/bpck.c for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]); printk 340 drivers/block/paride/bpck.c printk("\n"); printk 434 drivers/block/paride/bpck.c printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch); printk 435 drivers/block/paride/bpck.c printk("%s: %64.64s\n",pi->device,&scratch[64]); printk 439 drivers/block/paride/bpck.c printk("%s: bpck %s, backpack %8.8s unit %d", printk 441 drivers/block/paride/bpck.c printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port, printk 95 drivers/block/paride/bpck6.c printk(KERN_DEBUG "connect\n"); printk 119 drivers/block/paride/bpck6.c printk("disconnect\n"); printk 129 drivers/block/paride/bpck6.c printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n", printk 163 drivers/block/paride/bpck6.c printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port); printk 176 drivers/block/paride/bpck6.c printk(KERN_DEBUG "ppc_open returned %2x\n",out); printk 184 drivers/block/paride/bpck6.c printk(KERN_DEBUG "leaving probe\n"); printk 192 drivers/block/paride/bpck6.c printk(KERN_DEBUG "Failed open\n"); printk 203 drivers/block/paride/bpck6.c printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device); printk 204 drivers/block/paride/bpck6.c printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device); printk 205 drivers/block/paride/bpck6.c printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n", printk 207 drivers/block/paride/bpck6.c printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device, printk 220 drivers/block/paride/bpck6.c printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device); printk 250 drivers/block/paride/bpck6.c printk(KERN_INFO "bpck6: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n"); printk 251 drivers/block/paride/bpck6.c printk(KERN_INFO "bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA\n"); printk 253 drivers/block/paride/bpck6.c printk(KERN_DEBUG "bpck6: verbose debug enabled.\n"); printk 183 drivers/block/paride/comm.c printk("%s: comm %s, DataStor Commuter at 0x%x, ", printk 185 drivers/block/paride/comm.c printk("mode %d (%s), delay %d\n",pi->mode, printk 198 drivers/block/paride/dstr.c printk("%s: dstr %s, DataStor EP2000 at 0x%x, ", printk 200 drivers/block/paride/dstr.c printk("mode %d (%s), delay %d\n",pi->mode, printk 283 drivers/block/paride/epat.c printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n", printk 301 drivers/block/paride/epat.c printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ", printk 303 drivers/block/paride/epat.c printk("mode %d (%s), delay %d\n",pi->mode, printk 266 drivers/block/paride/epia.c printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n", printk 280 drivers/block/paride/epia.c printk("%s: epia %s, Shuttle EPIA at 0x%x, ", printk 282 drivers/block/paride/epia.c printk("mode %d (%s), delay %d\n",pi->mode, printk 118 drivers/block/paride/fit2.c { printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n", printk 176 drivers/block/paride/fit3.c printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, " printk 211 drivers/block/paride/friq.c printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n", printk 224 drivers/block/paride/friq.c printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device, printk 226 drivers/block/paride/friq.c printk("mode %d (%s), delay %d\n",pi->mode, printk 234 drivers/block/paride/frpw.c printk("%s: frpw: Xilinx does not support mode %d\n", printk 241 drivers/block/paride/frpw.c printk("%s: frpw: ASIC does not support mode 2\n", printk 264 drivers/block/paride/frpw.c printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n", printk 277 drivers/block/paride/frpw.c printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device, printk 279 drivers/block/paride/frpw.c printk("mode %d (%s), delay %d\n",pi->mode, printk 235 drivers/block/paride/kbic.c printk("%s: kbic %s, KingByte %s at 0x%x, ", printk 237 drivers/block/paride/kbic.c printk("mode %d (%s), delay %d\n",pi->mode, printk 95 drivers/block/paride/ktti.c { printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n", printk 118 drivers/block/paride/on20.c printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ", printk 120 drivers/block/paride/on20.c printk("mode %d (%s), delay %d\n",pi->mode, printk 170 drivers/block/paride/on26.c printk("on26: Device reset failed (%x,%x)\n",x,y); printk 283 drivers/block/paride/on26.c printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ", printk 285 drivers/block/paride/on26.c printk("mode %d (%s), delay %d\n",pi->mode, printk 189 drivers/block/paride/paride.c printk("%s: %s: port 0x%x, mode %d, test=(%d,%d)\n", printk 216 drivers/block/paride/paride.c printk("paride: %s protocol already registered\n", printk 224 drivers/block/paride/paride.c printk("paride: protocol table full\n"); printk 229 drivers/block/paride/paride.c printk("paride: %s registered as protocol %d\n", pr->name, k); printk 240 drivers/block/paride/paride.c printk("paride: %s not registered\n", pr->name); printk 268 drivers/block/paride/paride.c printk("%s: 0x%x is %s\n", pi->device, pi->port, port->name); printk 369 drivers/block/paride/paride.c printk("%s: Invalid parameters\n", device); printk 422 drivers/block/paride/paride.c printk("%s: Autoprobe failed\n", device); printk 424 drivers/block/paride/paride.c printk("%s: Adapter not found\n", device); printk 429 drivers/block/paride/paride.c printk("%s: Sharing %s at 0x%x\n", pi->device, printk 393 drivers/block/paride/pcd.c printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" printk 422 drivers/block/paride/pcd.c printk("%s: %s: command phase error\n", cd->name, fun); printk 451 drivers/block/paride/pcd.c printk("%s: %s: Read %d bytes\n", printk 457 drivers/block/paride/pcd.c printk printk 467 drivers/block/paride/pcd.c printk("%s: Stuck DRQ\n", cd->name); printk 499 drivers/block/paride/pcd.c printk("%s: %s: Sense key: %x, ASC: %x, ASQ: %x\n", printk 582 drivers/block/paride/pcd.c printk("%s: Reset (%d) signature = ", cd->name, k); printk 584 drivers/block/paride/pcd.c printk("%3x", read_reg(cd, i + 1)); printk 586 drivers/block/paride/pcd.c printk(" (incorrect)"); printk 587 drivers/block/paride/pcd.c printk("\n"); printk 644 drivers/block/paride/pcd.c printk("%s: %s is not a CD-ROM\n", printk 656 drivers/block/paride/pcd.c printk("%s: %s: %s\n", cd->name, cd->drive ? "Slave" : "Master", id); printk 714 drivers/block/paride/pcd.c printk("%s: %s version %s, major %d, nice %d\n", printk 755 drivers/block/paride/pcd.c printk("%s: No CD-ROM drive found\n", name); printk 290 drivers/block/paride/pd.c printk("%s: %s: status = 0x%x =", disk->name, msg, status); printk 293 drivers/block/paride/pd.c printk(" %s", pd_errs[i]); printk 294 drivers/block/paride/pd.c printk("\n"); printk 738 drivers/block/paride/pd.c printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n", printk 995 drivers/block/paride/pd.c printk("%s: no valid drive found\n", name); printk 1009 drivers/block/paride/pd.c printk("%s: %s version %s, major %d, cluster %d, nice %d\n", printk 442 drivers/block/paride/pf.c printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" printk 471 drivers/block/paride/pf.c printk("%s: %s: command phase error\n", pf->name, fun); printk 514 drivers/block/paride/pf.c printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n", printk 579 drivers/block/paride/pf.c printk("%s: Reset (%d) signature = ", pf->name, k); printk 581 drivers/block/paride/pf.c printk("%3x", read_reg(pf, i + 1)); printk 583 drivers/block/paride/pf.c printk(" (incorrect)"); printk 584 drivers/block/paride/pf.c printk("\n"); printk 642 drivers/block/paride/pf.c printk("%s: Drive %d, LUN %d," printk 664 drivers/block/paride/pf.c printk("%s: Drive %d, LUN %d, unsupported type %d\n", printk 680 drivers/block/paride/pf.c printk("%s: %s %s, %s LUN %d, type %d", printk 683 drivers/block/paride/pf.c printk(", removable"); printk 685 drivers/block/paride/pf.c printk(", no media\n"); printk 688 drivers/block/paride/pf.c printk(", RO"); printk 689 drivers/block/paride/pf.c printk(", %llu blocks\n", printk 727 drivers/block/paride/pf.c printk("%s: %s version %s, major %d, cluster %d, nice %d\n", printk 764 drivers/block/paride/pf.c printk("%s: No ATAPI disk detected\n", name); printk 310 drivers/block/paride/pg.c printk("%s: %s: stat=0x%x err=0x%x phase=%d%s\n", printk 339 drivers/block/paride/pg.c printk("%s: command phase error\n", dev->name); printk 346 drivers/block/paride/pg.c printk("%s: Command sent, dlen=%d packet= ", dev->name, dlen); printk 348 drivers/block/paride/pg.c printk("%02x ", cmd[k] & 0xff); printk 349 drivers/block/paride/pg.c printk("\n"); printk 375 drivers/block/paride/pg.c printk("%s: %s %d bytes\n", dev->name, printk 410 drivers/block/paride/pg.c printk("%s: Reset (%d) signature = ", dev->name, k); printk 412 drivers/block/paride/pg.c printk("%3x", got[i]); printk 414 drivers/block/paride/pg.c printk(" (incorrect)"); printk 415 drivers/block/paride/pg.c printk("\n"); printk 455 drivers/block/paride/pg.c printk("%s: %s %s, %s\n", dev->name, mf, id, ms[dev->drive]); printk 483 drivers/block/paride/pg.c printk("%s: %s version %s, major %d\n", name, name, PG_VERSION, major); printk 522 drivers/block/paride/pg.c printk("%s: No ATAPI device detected\n", name); printk 553 drivers/block/paride/pg.c printk("%s: buffer allocation failed\n", dev->name); printk 684 drivers/block/paride/pg.c printk("pg_init: unable to get major number %d\n", major); printk 289 drivers/block/paride/pt.c printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x" printk 319 drivers/block/paride/pt.c printk("%s: %s: command phase error\n", tape->name, fun); printk 368 drivers/block/paride/pt.c printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n", printk 415 drivers/block/paride/pt.c printk("%s: %s DSC timeout\n", tape->name, msg); printk 417 drivers/block/paride/pt.c printk("%s: %s stat=0x%x err=0x%x\n", tape->name, msg, s, printk 472 drivers/block/paride/pt.c printk("%s: Reset (%d) signature = ", tape->name, k); printk 474 drivers/block/paride/pt.c printk("%3x", read_reg(pi, i + 1)); printk 476 drivers/block/paride/pt.c printk(" (incorrect)"); printk 477 drivers/block/paride/pt.c printk("\n"); printk 547 drivers/block/paride/pt.c printk("%s: Drive %d, unsupported type %d\n", printk 571 drivers/block/paride/pt.c printk("%s: %s %s, %s", tape->name, mf, id, ms[tape->drive]); printk 573 drivers/block/paride/pt.c printk(", no media\n"); printk 576 drivers/block/paride/pt.c printk(", RO"); printk 577 drivers/block/paride/pt.c printk(", blocksize %d, %d MB\n", tape->bs, tape->capacity / 1024); printk 607 drivers/block/paride/pt.c printk("%s: %s version %s, major %d\n", name, name, PT_VERSION, major); printk 655 drivers/block/paride/pt.c printk("%s: No ATAPI tape drive detected\n", name); printk 691 drivers/block/paride/pt.c printk("%s: buffer allocation failed\n", tape->name); printk 732 drivers/block/paride/pt.c printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name, printk 830 drivers/block/paride/pt.c printk("%s: Phase error on read: %d\n", tape->name, printk 931 drivers/block/paride/pt.c printk("%s: Phase error on write: %d \n", printk 979 drivers/block/paride/pt.c printk("pt_init: unable to get major number %d\n", major); printk 552 drivers/block/ps3disk.c printk(KERN_ERR "%s:%u: register_blkdev failed %d\n", __func__, printk 597 drivers/block/rbd.c printk(KERN_WARNING "%s: %pV\n", RBD_DRV_NAME, &vaf); printk 599 drivers/block/rbd.c printk(KERN_WARNING "%s: %s: %pV\n", printk 602 drivers/block/rbd.c printk(KERN_WARNING "%s: image %s: %pV\n", printk 605 drivers/block/rbd.c printk(KERN_WARNING "%s: id %s: %pV\n", printk 608 drivers/block/rbd.c printk(KERN_WARNING "%s: rbd_dev %p: %pV\n", printk 616 drivers/block/rbd.c printk(KERN_ERR "\nAssertion failure in %s() " \ printk 212 drivers/block/sunvdc.c printk(KERN_ERR PFX "Received unknown msg [%02x:%02x:%04x:%08x]\n", printk 214 drivers/block/sunvdc.c printk(KERN_ERR PFX "Resetting connection.\n"); printk 262 drivers/block/sunvdc.c printk(KERN_ERR PFX "%s: Bogus vdisk_type 0x%x\n", printk 268 drivers/block/sunvdc.c printk(KERN_ERR PFX "%s: BLOCK size increased " printk 291 drivers/block/sunvdc.c printk(KERN_ERR PFX "%s: Attribute NACK\n", vio->name); printk 497 drivers/block/sunvdc.c printk(KERN_ERR PFX "ldc_map_sg() failure, err=%d.\n", err); printk 525 drivers/block/sunvdc.c printk(KERN_ERR PFX "vdc_tx_trigger() failure, err=%d\n", err); printk 831 drivers/block/sunvdc.c printk(KERN_ERR PFX "VD_OP_GET_DISKGEOM returns " printk 842 drivers/block/sunvdc.c printk(KERN_ERR PFX "%s: Could not allocate queue.\n", printk 848 drivers/block/sunvdc.c printk(KERN_ERR PFX "%s: Could not allocate gendisk.\n", printk 923 drivers/block/sunvdc.c printk(KERN_INFO "%s", version); printk 989 drivers/block/sunvdc.c printk(KERN_ERR PFX "Port id [%llu] too large.\n", printk 996 drivers/block/sunvdc.c printk(KERN_WARNING printk 1005 drivers/block/sunvdc.c printk(KERN_ERR PFX "Cannot allocate vdc_port.\n"); printk 591 drivers/block/swim.c printk(KERN_ERR printk 825 drivers/block/swim.c printk(KERN_ERR "Unable to get major %d for SWIM floppy\n", printk 917 drivers/block/swim.c printk(KERN_INFO "SWIM device not found !\n"); printk 988 drivers/block/swim.c printk(KERN_INFO "SWIM floppy driver %s\n", DRIVER_VERSION); printk 82 drivers/block/sx8.c #define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 84 drivers/block/sx8.c #define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 98 drivers/block/sx8.c printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \ printk 824 drivers/block/sx8.c printk(KERN_ERR PFX "BUG: cur_scan_dev==%d, array_id==%d\n", printk 849 drivers/block/sx8.c printk(KERN_INFO DRV_NAME "(%s): port %u device %Lu sectors\n", printk 852 drivers/block/sx8.c printk(KERN_INFO DRV_NAME "(%s): port %u device \"%s\"\n", printk 882 drivers/block/sx8.c printk(KERN_INFO DRV_NAME "(%s): found %u interesting devices\n", printk 918 drivers/block/sx8.c printk(KERN_ERR DRV_NAME "(%s): BUG: invalid tag 0x%x\n", printk 1000 drivers/block/sx8.c printk(KERN_WARNING DRV_NAME "(%s): BUG: unhandled message type %d/%d\n", printk 1038 drivers/block/sx8.c printk(KERN_WARNING DRV_NAME "(%s): unhandled event type %d\n", printk 1188 drivers/block/sx8.c printk(KERN_INFO DRV_NAME "(%s): %d ports activated\n", printk 1206 drivers/block/sx8.c printk(KERN_ERR PFX "BUG: unknown state %d\n", state); printk 1239 drivers/block/sx8.c printk(KERN_ERR PFX "carm_init_wait timeout, bits == 0x%x, test_bit == %s\n", printk 1425 drivers/block/sx8.c printk(KERN_ERR DRV_NAME "(%s): DMA mask failure\n", printk 1432 drivers/block/sx8.c printk(KERN_ERR DRV_NAME "(%s): memory alloc failure\n", printk 1446 drivers/block/sx8.c printk(KERN_ERR DRV_NAME "(%s): MMIO alloc failure\n", printk 1454 drivers/block/sx8.c printk(KERN_ERR DRV_NAME "(%s): DMA SHM alloc failure\n", printk 1511 drivers/block/sx8.c printk(KERN_ERR DRV_NAME "(%s): irq alloc failure\n", printk 1523 drivers/block/sx8.c printk(KERN_INFO "%s: pci %s, ports %d, io %llx, irq %u, major %d\n", printk 1564 drivers/block/sx8.c printk(KERN_ERR PFX "BUG: no host data for PCI(%s)\n", printk 195 drivers/block/umem.c printk(KERN_DEBUG "%p ", p); printk 198 drivers/block/umem.c printk("%02x ", *p++); printk 200 drivers/block/umem.c printk("\n"); printk 209 drivers/block/umem.c printk(KERN_CONT "ANY_ERR "); printk 211 drivers/block/umem.c printk(KERN_CONT "MBE_ERR "); printk 213 drivers/block/umem.c printk(KERN_CONT "PARITY_ERR_REP "); printk 215 drivers/block/umem.c printk(KERN_CONT "PARITY_ERR_DET "); printk 217 drivers/block/umem.c printk(KERN_CONT "SYSTEM_ERR_SIG "); printk 219 drivers/block/umem.c printk(KERN_CONT "TARGET_ABT "); printk 221 drivers/block/umem.c printk(KERN_CONT "MASTER_ABT "); printk 223 drivers/block/umem.c printk(KERN_CONT "CHAIN_COMPLETE "); printk 225 drivers/block/umem.c printk(KERN_CONT "DMA_COMPLETE "); printk 226 drivers/block/umem.c printk("\n"); printk 798 drivers/block/umem.c printk(KERN_INFO DRIVER_VERSION " : " DRIVER_DESC "\n"); printk 1095 drivers/block/umem.c printk(KERN_INFO "MM: desc_per_page = %ld\n", DESC_PER_PAGE); printk 1077 drivers/block/xen-blkfront.c printk(KERN_WARNING "blkfront: your disk configuration is " printk 1110 drivers/block/xen-blkfront.c printk(KERN_WARNING "blkfront: vdevice 0x%x is above the extended range; ignoring\n", info->vdevice); printk 1124 drivers/block/xen-blkfront.c printk(KERN_WARNING "blkfront: vdevice 0x%x might conflict with " printk 1608 drivers/block/xen-blkfront.c printk(KERN_WARNING "blkfront: %s: %s op failed\n", printk 1620 drivers/block/xen-blkfront.c printk(KERN_WARNING "blkfront: %s: %s op failed\n", printk 1626 drivers/block/xen-blkfront.c printk(KERN_WARNING "blkfront: %s: empty %s op failed\n", printk 1977 drivers/block/xen-blkfront.c printk(KERN_INFO printk 2360 drivers/block/xen-blkfront.c printk(KERN_INFO "Setting capacity to %Lu\n", printk 375 drivers/block/xsysace.c printk(KERN_INFO "%.8x:", i); printk 378 drivers/block/xsysace.c printk(" "); printk 379 drivers/block/xsysace.c printk("%.2x", ptr[i + j]); printk 381 drivers/block/xsysace.c printk(" "); printk 383 drivers/block/xsysace.c printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.'); printk 384 drivers/block/xsysace.c printk("\n"); printk 1265 drivers/block/xsysace.c printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc); printk 180 drivers/block/z2ram.c printk( KERN_ERR DEVICE_NAME printk 205 drivers/block/z2ram.c printk( KERN_ERR DEVICE_NAME printk 218 drivers/block/z2ram.c printk( KERN_INFO DEVICE_NAME printk 230 drivers/block/z2ram.c printk( KERN_ERR DEVICE_NAME printk 239 drivers/block/z2ram.c printk( KERN_INFO DEVICE_NAME printk 251 drivers/block/z2ram.c printk( KERN_ERR DEVICE_NAME printk 259 drivers/block/z2ram.c printk( KERN_INFO DEVICE_NAME printk 269 drivers/block/z2ram.c printk( KERN_ERR DEVICE_NAME printk 277 drivers/block/z2ram.c printk( KERN_INFO DEVICE_NAME printk 292 drivers/block/z2ram.c printk( KERN_NOTICE DEVICE_NAME printk 184 drivers/bluetooth/dtl1_cs.c printk(KERN_INFO "Bluetooth: Nokia control data ="); printk 186 drivers/bluetooth/dtl1_cs.c printk(" %02x", skb->data[i]); printk 188 drivers/bluetooth/dtl1_cs.c printk("\n"); printk 643 drivers/cdrom/gdrom.c printk(KERN_DEBUG "gdrom: Non-fs request ignored\n"); printk 38 drivers/char/agp/agp.h #define DBG(x,y...) printk (KERN_DEBUG PFX "%s: " x "\n", __func__ , ## y) printk 193 drivers/char/agp/alpha-agp.c printk(KERN_INFO PFX "Detected AGP on hose %d\n", agp->hose->index); printk 256 drivers/char/agp/amd64-agp.c printk(KERN_ERR PFX "Aperture conflicts with PCI mapping.\n"); printk 767 drivers/char/agp/amd64-agp.c printk(KERN_INFO PFX "No supported AGP bridge found.\n"); printk 769 drivers/char/agp/amd64-agp.c printk(KERN_INFO PFX "You can try agp_try_unsupported=1\n"); printk 771 drivers/char/agp/amd64-agp.c printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n"); printk 274 drivers/char/agp/backend.c printk (KERN_DEBUG PFX "Erk, registering with no pci_dev!\n"); printk 338 drivers/char/agp/backend.c printk(KERN_INFO "Linux agpgart interface v%d.%d\n", printk 111 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_tlbflush()\n"); printk 121 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_cleanup()\n"); printk 134 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_configure()\n"); printk 169 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_free_gatt_table(%p, %02x, %08x)\n", printk 174 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_free_gatt_table() freed %d pages\n", freed); printk 202 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_create_gatt_table(%d)\n", num_entries); printk 243 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_insert_memory(%lx, %d)\n", pg_start, count); printk 289 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "efficeon_remove_memory(%lx, %d)\n", pg_start, count); printk 356 drivers/char/agp/efficeon-agp.c printk(KERN_ERR PFX "Unsupported Efficeon chipset (device id: %04x)\n", printk 361 drivers/char/agp/efficeon-agp.c printk(KERN_INFO PFX "Detected Transmeta Efficeon TM8000 series chipset\n"); printk 377 drivers/char/agp/efficeon-agp.c printk(KERN_ERR PFX "Unable to Enable PCI device\n"); printk 390 drivers/char/agp/efficeon-agp.c printk(KERN_ERR PFX "could not assign resource 0\n"); printk 423 drivers/char/agp/efficeon-agp.c printk(KERN_DEBUG PFX "agp_efficeon_resume()\n"); printk 1059 drivers/char/agp/frontend.c printk(KERN_ERR PFX "unable to get minor: %d\n", AGPGART_MINOR); printk 415 drivers/char/agp/generic.c printk(KERN_INFO PFX "memory %p is already bound!\n", curr); printk 455 drivers/char/agp/generic.c printk(KERN_INFO PFX "memory %p was not bound!\n", curr); printk 483 drivers/char/agp/generic.c printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n", printk 501 drivers/char/agp/generic.c printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate. " printk 506 drivers/char/agp/generic.c printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate. " printk 517 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm); printk 587 drivers/char/agp/generic.c printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n", printk 595 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm); printk 599 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4); printk 628 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s passes broken AGP3 flags (%x). Fixed.\n", printk 639 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s passes broken AGP2 flags (%x) in AGP3 mode. Fixed.\n", printk 649 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s requested AGPx8 but bridge not capable.\n", current->comm); printk 655 drivers/char/agp/generic.c printk(KERN_INFO PFX "%s requested AGPx8 but graphic card not capable.\n", current->comm); printk 675 drivers/char/agp/generic.c printk(KERN_INFO PFX "No AGP mode specified. Setting to highest mode " printk 680 drivers/char/agp/generic.c printk(KERN_INFO PFX "Fell back to AGPx4 mode because "); printk 682 drivers/char/agp/generic.c printk(KERN_INFO PFX "bridge couldn't do x8. bridge_agpstat:%x (orig=%x)\n", printk 688 drivers/char/agp/generic.c printk(KERN_INFO PFX "graphics card couldn't do x8. vga_agpstat:%x (orig=%x)\n", printk 729 drivers/char/agp/generic.c printk(KERN_INFO PFX "Couldn't find an AGP VGA controller.\n"); printk 943 drivers/char/agp/generic.c printk(KERN_WARNING "Could not set GATT table memory to UC!\n"); printk 78 drivers/char/agp/hp-agp.c printk(KERN_INFO PFX "HP ZX1 IOC: IOPDIR shared with sba_iommu\n"); printk 93 drivers/char/agp/hp-agp.c printk(KERN_ERR PFX "Invalid IOTLB page size " printk 115 drivers/char/agp/hp-agp.c printk(KERN_ERR PFX "No reserved IO PDIR entry found; " printk 128 drivers/char/agp/hp-agp.c printk(KERN_INFO PFX "HP ZX1 IOC: IOPDIR dedicated to GART\n"); printk 217 drivers/char/agp/hp-agp.c printk(KERN_ERR PFX "Invalid capability ID 0x%02x at 0x%x\n", printk 297 drivers/char/agp/hp-agp.c printk(KERN_ERR PFX "Couldn't allocate contiguous " printk 500 drivers/char/agp/hp-agp.c printk(KERN_ERR PFX "Detected HP ZX1 " printk 517 drivers/char/agp/hp-agp.c printk(KERN_INFO PFX "Detected HP ZX1 %s AGP chipset " printk 116 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX printk 130 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "GART SRAMS disabled on 460GX chipset\n"); printk 131 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "AGPGART operation not possible\n"); printk 137 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "We can't have a 32GB aperture with 4KB GART pages\n"); printk 256 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "ioremap failed\n"); printk 312 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "Looks like we're out of AGP memory\n"); printk 373 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "Couldn't alloc 4M GART page...\n"); printk 381 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "Out of memory, we're in trouble...\n"); printk 420 drivers/char/agp/i460-agp.c printk(KERN_ERR PFX "Looks like we're out of AGP memory\n"); printk 608 drivers/char/agp/i460-agp.c printk(KERN_INFO PFX "Detected Intel 460GX chipset\n"); printk 278 drivers/char/agp/nvidia-agp.c printk(KERN_ERR PFX printk 356 drivers/char/agp/nvidia-agp.c printk(KERN_INFO PFX "Detected an NVIDIA nForce/nForce2 " printk 367 drivers/char/agp/nvidia-agp.c printk(KERN_INFO PFX "Detected NVIDIA nForce chipset\n"); printk 371 drivers/char/agp/nvidia-agp.c printk(KERN_INFO PFX "Detected NVIDIA nForce2 chipset\n"); printk 375 drivers/char/agp/nvidia-agp.c printk(KERN_ERR PFX "Unsupported NVIDIA chipset (device id: %04x)\n", printk 244 drivers/char/agp/parisc-agp.c printk(KERN_INFO DRVPFX "IO PDIR shared with sba_iommu\n"); printk 255 drivers/char/agp/parisc-agp.c printk(KERN_ERR DRVPFX "Invalid IOTLB page size " printk 276 drivers/char/agp/parisc-agp.c printk(KERN_ERR DRVPFX "No reserved IO PDIR entry found; " printk 319 drivers/char/agp/parisc-agp.c printk(KERN_ERR DRVPFX "Invalid capability ID 0x%02x at 0x%x\n", printk 396 drivers/char/agp/parisc-agp.c printk(KERN_INFO DRVPFX "No Pluto found, so no AGPGART for you.\n"); printk 404 drivers/char/agp/parisc-agp.c printk(KERN_INFO DRVPFX "No AGP devices found.\n"); printk 40 drivers/char/agp/via-agp.c printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp); printk 453 drivers/char/agp/via-agp.c printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name); printk 469 drivers/char/agp/via-agp.c printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n"); printk 184 drivers/char/apm-emulation.c printk(KERN_ERR "apm: an event queue overflowed\n"); printk 635 drivers/char/apm-emulation.c printk(KERN_NOTICE "apm: disabled on user request.\n"); printk 147 drivers/char/applicom.c printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n", printk 153 drivers/char/applicom.c printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n", printk 195 drivers/char/applicom.c printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n"); printk 210 drivers/char/applicom.c printk(KERN_INFO "ac.o: Failed to ioremap PCI memory " printk 217 drivers/char/applicom.c printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n", printk 225 drivers/char/applicom.c printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n"); printk 232 drivers/char/applicom.c printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq); printk 253 drivers/char/applicom.c printk(KERN_INFO "ac.o: No PCI boards found.\n"); printk 254 drivers/char/applicom.c printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n"); printk 265 drivers/char/applicom.c printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1); printk 275 drivers/char/applicom.c printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq); printk 279 drivers/char/applicom.c printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq); printk 293 drivers/char/applicom.c printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found " printk 306 drivers/char/applicom.c printk(KERN_WARNING "ac.o: Unable to register misc device\n"); printk 322 drivers/char/applicom.c printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d", printk 332 drivers/char/applicom.c printk(" S/N %d\n", serial); printk 334 drivers/char/applicom.c printk("\n"); printk 373 drivers/char/applicom.c printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n", printk 399 drivers/char/applicom.c printk("Write to applicom card #%d. struct st_ram_io follows:", printk 404 drivers/char/applicom.c printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]); printk 407 drivers/char/applicom.c printk(" %2.2X", ((unsigned char *) &st_loc)[c]); printk 411 drivers/char/applicom.c printk("\nstruct mailbox follows:"); printk 414 drivers/char/applicom.c printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]); printk 417 drivers/char/applicom.c printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]); printk 421 drivers/char/applicom.c printk("\n"); printk 430 drivers/char/applicom.c printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n", printk 515 drivers/char/applicom.c printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard); printk 518 drivers/char/applicom.c printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]); printk 521 drivers/char/applicom.c printk(" %2.2X", ((unsigned char *)st_loc)[c]); printk 525 drivers/char/applicom.c printk("\nstruct mailbox follows:"); printk 528 drivers/char/applicom.c printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]); printk 531 drivers/char/applicom.c printk(" %2.2X", ((unsigned char *)mailbox)[c]); printk 534 drivers/char/applicom.c printk("\n"); printk 551 drivers/char/applicom.c printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n", printk 595 drivers/char/applicom.c printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n", printk 617 drivers/char/applicom.c printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount); printk 655 drivers/char/applicom.c printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n", printk 663 drivers/char/applicom.c printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n", printk 792 drivers/char/applicom.c printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n"); printk 793 drivers/char/applicom.c printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards); printk 794 drivers/char/applicom.c printk(KERN_INFO "Segment of board ........... %X\n", (int) mem); printk 795 drivers/char/applicom.c printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq); printk 807 drivers/char/applicom.c printk(KERN_INFO "Prom version board %d ....... V%d.%d %s", printk 819 drivers/char/applicom.c printk(" S/N %d\n", serial); printk 821 drivers/char/applicom.c printk("\n"); printk 824 drivers/char/applicom.c printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount); printk 826 drivers/char/applicom.c printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount); printk 828 drivers/char/applicom.c printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount); printk 830 drivers/char/applicom.c printk(KERN_INFO "Process in read pending\n"); printk 833 drivers/char/applicom.c printk(KERN_INFO "Process in write pending board %d\n",i+1); printk 180 drivers/char/bsr.c printk(KERN_ERR "bsr of-node has missing/incorrect property\n"); printk 193 drivers/char/bsr.c printk(KERN_ERR "Unable to alloc bsr dev\n"); printk 200 drivers/char/bsr.c printk(KERN_ERR "bsr of-node has invalid reg property, skipping\n"); printk 251 drivers/char/bsr.c printk(KERN_ERR "device_create failed for %s\n", printk 299 drivers/char/bsr.c printk(KERN_ERR "class_create() failed for bsr_class\n"); printk 308 drivers/char/bsr.c printk(KERN_ERR "alloc_chrdev_region() failed for bsr\n"); printk 397 drivers/char/ds1620.c printk(KERN_ERR "therm: unable to register /proc/therm\n"); printk 403 drivers/char/ds1620.c printk(KERN_INFO "Thermostat: high %i.%i, low %i.%i, " printk 137 drivers/char/dsp56k.c printk(KERN_ERR "Failed to register device for \"%s\"\n", printk 144 drivers/char/dsp56k.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 149 drivers/char/dsp56k.c printk(KERN_ERR "Bogus length %d in image \"%s\"\n", printk 239 drivers/char/dsp56k.c printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev); printk 301 drivers/char/dsp56k.c printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev); printk 399 drivers/char/dsp56k.c printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev); printk 420 drivers/char/dsp56k.c printk("DSP56k driver: Unknown minor device: %d\n", dev); printk 472 drivers/char/dsp56k.c printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev); printk 499 drivers/char/dsp56k.c printk("DSP56k driver: Hardware not present\n"); printk 504 drivers/char/dsp56k.c printk("DSP56k driver: Unable to register driver\n"); printk 515 drivers/char/dsp56k.c printk(banner); printk 70 drivers/char/dtlk.c #define TRACE_TEXT(str) printk(str); printk 71 drivers/char/dtlk.c #define TRACE_RET printk(")") printk 154 drivers/char/dtlk.c printk(KERN_ERR "dtlk_read times out\n"); printk 166 drivers/char/dtlk.c printk(" \""); printk 173 drivers/char/dtlk.c printk("%c", ch); printk 175 drivers/char/dtlk.c printk("\\%03o", ch); printk 177 drivers/char/dtlk.c printk("\""); printk 221 drivers/char/dtlk.c printk("dtlk: write timeout. " printk 340 drivers/char/dtlk.c printk(KERN_ERR "DoubleTalk PC - cannot register device\n"); printk 348 drivers/char/dtlk.c printk(", MAJOR %d\n", dtlk_major); printk 376 drivers/char/dtlk.c printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies); printk 385 drivers/char/dtlk.c printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0); printk 401 drivers/char/dtlk.c printk("DoubleTalk PC - Port %03x = %04x\n", printk 414 drivers/char/dtlk.c printk("DoubleTalk PC at %03x-%03x, " printk 432 drivers/char/dtlk.c printk(", indexing %d\n", dtlk_has_indexing); printk 457 drivers/char/dtlk.c printk("\n"); printk 459 drivers/char/dtlk.c printk(" %02x", buffer[j]); printk 460 drivers/char/dtlk.c printk("\n"); printk 483 drivers/char/dtlk.c printk("\n"); printk 485 drivers/char/dtlk.c printk(" %02x", buffer[j]); printk 486 drivers/char/dtlk.c printk("\n"); printk 497 drivers/char/dtlk.c printk(KERN_INFO "DoubleTalk PC - not found\n"); printk 578 drivers/char/dtlk.c printk(KERN_ERR "dtlk_read_tts() timeout\n"); printk 590 drivers/char/dtlk.c printk(KERN_ERR "dtlk_read_tts() timeout\n"); printk 614 drivers/char/dtlk.c printk(KERN_ERR "dtlk_read_lpc() timeout\n"); printk 636 drivers/char/dtlk.c printk(" dtlk_write_tts("); printk 638 drivers/char/dtlk.c printk("'%c'", ch); printk 640 drivers/char/dtlk.c printk("0x%02x", ch); printk 647 drivers/char/dtlk.c printk(KERN_ERR "dtlk_write_tts() timeout\n"); printk 658 drivers/char/dtlk.c printk(")\n"); printk 87 drivers/char/efirtc.c printk(KERN_ERR "efirtc: EFI year < 1998, invalid date\n"); printk 183 drivers/char/efirtc.c printk(KERN_ERR "efitime: can't read time\n"); printk 345 drivers/char/efirtc.c printk(KERN_INFO "EFI Time Services Driver v%s\n", EFI_RTC_VERSION); printk 349 drivers/char/efirtc.c printk(KERN_ERR "efirtc: can't misc_register on minor=%d\n", printk 356 drivers/char/efirtc.c printk(KERN_ERR "efirtc: can't create /proc/driver/efirtc.\n"); printk 129 drivers/char/hangcheck-timer.c printk(KERN_CRIT "Hangcheck: Task state:\n"); printk 135 drivers/char/hangcheck-timer.c printk(KERN_CRIT "Hangcheck: hangcheck is restarting the machine.\n"); printk 138 drivers/char/hangcheck-timer.c printk(KERN_CRIT "Hangcheck: hangcheck value past margin!\n"); printk 145 drivers/char/hangcheck-timer.c printk("Hangcheck: called %Ld ns since last time (%Ld ns overshoot)\n", printk 155 drivers/char/hangcheck-timer.c printk("Hangcheck: starting hangcheck timer %s (tick is %d seconds, margin is %d seconds).\n", printk 171 drivers/char/hangcheck-timer.c printk("Hangcheck: Stopped hangcheck timer.\n"); printk 506 drivers/char/hpet.c printk(KERN_ERR "hpet: IRQ %d is not free\n", irq); printk 853 drivers/char/hpet.c printk(KERN_DEBUG "%s: duplicate HPET ignored\n", printk 880 drivers/char/hpet.c printk(KERN_WARNING "hpet: number irqs doesn't agree" printk 900 drivers/char/hpet.c printk(KERN_INFO "hpet%d: at MMIO 0x%lx, IRQ%s", printk 904 drivers/char/hpet.c printk(KERN_CONT "%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); printk 905 drivers/char/hpet.c printk(KERN_CONT "\n"); printk 909 drivers/char/hpet.c printk(KERN_INFO printk 1032 drivers/char/hpet.c printk("%s: no address or irqs in _CRS\n", __func__); printk 190 drivers/char/ipmi/ipmi_kcs_sm.c printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", printk 275 drivers/char/ipmi/ipmi_kcs_sm.c printk(KERN_DEBUG "start_kcs_transaction -"); printk 334 drivers/char/ipmi/ipmi_kcs_sm.c printk(KERN_DEBUG "KCS: State = %d, %x\n", kcs->state, status); printk 133 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG "start_smic_transaction -"); printk 155 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG "smic_get result -"); printk 327 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG printk 348 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG "smic_event - state = %d, flags = 0x%02x, status = 0x%02x\n", printk 439 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG "SMIC_WRITE_END: data = %02x\n", printk 519 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG "SMIC_READ_END: data = %02x\n", printk 536 drivers/char/ipmi/ipmi_smic_sm.c printk(KERN_DEBUG "smic->state = %d\n", smic->state); printk 250 drivers/char/lp.c printk(KERN_INFO "lp%d out of paper\n", minor); printk 256 drivers/char/lp.c printk(KERN_INFO "lp%d off-line\n", minor); printk 262 drivers/char/lp.c printk(KERN_INFO "lp%d on fire\n", minor); printk 402 drivers/char/lp.c printk(KERN_INFO "lp%d releasing parport\n", minor); printk 525 drivers/char/lp.c printk(KERN_INFO "lp%d out of paper\n", minor); printk 530 drivers/char/lp.c printk(KERN_INFO "lp%d off-line\n", minor); printk 535 drivers/char/lp.c printk(KERN_ERR "lp%d printer error\n", minor); printk 552 drivers/char/lp.c printk(KERN_INFO "lp%d: ECP mode\n", minor); printk 587 drivers/char/lp.c printk(KERN_DEBUG "lp%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg); printk 893 drivers/char/lp.c printk(KERN_WARNING "warning: 'lp=0x%x' is deprecated, ignored\n", x); printk 901 drivers/char/lp.c printk(KERN_INFO "lp: too many ports, %s ignored.\n", printk 909 drivers/char/lp.c printk(KERN_INFO "lp: too many ports, %s ignored.\n", printk 937 drivers/char/lp.c printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name, printk 945 drivers/char/lp.c printk(KERN_INFO "lp%d: console ready\n", CONSOLE_LP); printk 947 drivers/char/lp.c printk(KERN_ERR "lp%d: cannot run console on %s\n", printk 967 drivers/char/lp.c printk(KERN_INFO "lp: ignoring parallel port (max. %d)\n",LP_NO); printk 1047 drivers/char/lp.c printk(KERN_ERR "lp: unable to get major %d\n", LP_MAJOR); printk 1058 drivers/char/lp.c printk(KERN_ERR "lp: unable to register with parport\n"); printk 1064 drivers/char/lp.c printk(KERN_INFO "lp: driver loaded but no devices found\n"); printk 1067 drivers/char/lp.c printk(KERN_INFO "lp: (is IEEE 1284 support enabled?)\n"); printk 1097 drivers/char/lp.c printk(KERN_ERR "lp: bad port specifier `%s'\n", parport[n]); printk 947 drivers/char/mem.c printk("unable to get major %d for memory devs\n", MEM_MAJOR); printk 269 drivers/char/mspec.c printk(KERN_ERR "%s: failed to register device %i\n", printk 275 drivers/char/mspec.c printk(KERN_ERR "%s: failed to register device %i\n", printk 281 drivers/char/mspec.c printk(KERN_INFO "%s %s initialized devices: %s %s\n", printk 65 drivers/char/mwave/mwavedd.h #define PRINTK_ERROR printk printk 76 drivers/char/mwave/mwavedd.h printk(s); \ printk 81 drivers/char/mwave/mwavedd.h printk(s,v1); \ printk 86 drivers/char/mwave/mwavedd.h printk(s,v1,v2); \ printk 91 drivers/char/mwave/mwavedd.h printk(s,v1,v2,v3); \ printk 96 drivers/char/mwave/mwavedd.h printk(s,v1,v2,v3,v4); \ printk 101 drivers/char/mwave/mwavedd.h printk(s,v1,v2,v3,v4,v5); \ printk 106 drivers/char/mwave/mwavedd.h printk(s,v1,v2,v3,v4,v5,v6); \ printk 111 drivers/char/mwave/mwavedd.h printk(s,v1,v2,v3,v4,v5,v6,v7); \ printk 523 drivers/char/mwave/smapi.c printk("smapi::SmapiQUerySystemID entry\n"); printk 528 drivers/char/mwave/smapi.c printk("AX=%x, BX=%x, CX=%x, DX=%x, DI=%x, SI=%x\n", printk 531 drivers/char/mwave/smapi.c printk("smapi::SmapiQuerySystemID smapi_request error\n"); printk 126 drivers/char/nsc_gpio.c printk(KERN_DEBUG NAME " initializing\n"); printk 132 drivers/char/nsc_gpio.c printk(KERN_DEBUG NAME " cleanup\n"); printk 217 drivers/char/nwbutton.c printk (KERN_INFO "NetWinder Button Driver Version %s (C) Alex Holden " printk 221 drivers/char/nwbutton.c printk (KERN_WARNING "nwbutton: Couldn't register device 10, " printk 228 drivers/char/nwbutton.c printk (KERN_WARNING "nwbutton: IRQ %d is not free.\n", printk 129 drivers/char/nwflash.c printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, " printk 153 drivers/char/nwflash.c printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n", printk 196 drivers/char/nwflash.c printk(KERN_DEBUG "flash_write: writing %d block(s) " printk 201 drivers/char/nwflash.c printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock); printk 215 drivers/char/nwflash.c printk(KERN_ERR "flash_write: erase error %x\n", rc); printk 219 drivers/char/nwflash.c printk(KERN_DEBUG "flash_write: writing offset %lX, " printk 246 drivers/char/nwflash.c printk(KERN_ERR "flash_write: write error %X\n", rc); printk 255 drivers/char/nwflash.c printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written); printk 278 drivers/char/nwflash.c printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n", printk 366 drivers/char/nwflash.c printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr); printk 384 drivers/char/nwflash.c printk(KERN_ERR "flash_erase: verify err at %p = %X\n", printk 509 drivers/char/nwflash.c printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n", printk 519 drivers/char/nwflash.c printk(KERN_ERR "write_block: timeout at 0x%X\n", printk 540 drivers/char/nwflash.c printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n", printk 599 drivers/char/nwflash.c printk("Flash: incorrect ID 0x%04X.\n", id); printk 603 drivers/char/nwflash.c printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n", printk 1729 drivers/char/pcmcia/cm4000_cs.c printk(KERN_INFO MODULE_NAME ": delaying release until " printk 1804 drivers/char/pcmcia/cm4000_cs.c printk(KERN_NOTICE MODULE_NAME ": all devices in use\n"); printk 1895 drivers/char/pcmcia/cm4000_cs.c printk(KERN_WARNING MODULE_NAME printk 660 drivers/char/pcmcia/cm4040_cs.c printk(KERN_WARNING MODULE_NAME printk 520 drivers/char/pcmcia/synclink_cs.c printk("mgslpc_attach\n"); printk 524 drivers/char/pcmcia/synclink_cs.c printk("Error can't allocate device instance data\n"); printk 582 drivers/char/pcmcia/synclink_cs.c printk("mgslpc_config(0x%p)\n", link); printk 618 drivers/char/pcmcia/synclink_cs.c printk("mgslpc_release(0x%p)\n", link); printk 626 drivers/char/pcmcia/synclink_cs.c printk("mgslpc_detach(0x%p)\n", link); printk 663 drivers/char/pcmcia/synclink_cs.c printk(badinfo, name, routine); printk 667 drivers/char/pcmcia/synclink_cs.c printk(badmagic, name, routine); printk 712 drivers/char/pcmcia/synclink_cs.c printk("tx_pause(%s)\n", info->device_name); printk 728 drivers/char/pcmcia/synclink_cs.c printk("tx_release(%s)\n", info->device_name); printk 775 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):bh_handler(%s) entry\n", printk 785 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):bh_handler() work item action=%d\n", printk 801 drivers/char/pcmcia/synclink_cs.c printk("Unknown work item ID=%08X!\n", action); printk 808 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):bh_handler(%s) exit\n", printk 815 drivers/char/pcmcia/synclink_cs.c printk("bh_transmit() entry on %s\n", info->device_name); printk 837 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom); printk 949 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):rx_ready_async", printk 951 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", printk 1004 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name); printk 1064 drivers/char/pcmcia/synclink_cs.c printk("CTS tx start..."); printk 1073 drivers/char/pcmcia/synclink_cs.c printk("CTS tx stop..."); printk 1106 drivers/char/pcmcia/synclink_cs.c printk("%s CD now %s...", info->device_name, printk 1112 drivers/char/pcmcia/synclink_cs.c printk("doing serial hangup..."); printk 1166 drivers/char/pcmcia/synclink_cs.c printk("mgslpc_isr(%d) entry.\n", info->irq_level); printk 1177 drivers/char/pcmcia/synclink_cs.c printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis); printk 1180 drivers/char/pcmcia/synclink_cs.c printk("synclink_cs:hardware failed or ejected\n"); printk 1250 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):%s queueing bh task.\n", printk 1260 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_isr(%d)exit.\n", printk 1273 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name); printk 1282 drivers/char/pcmcia/synclink_cs.c printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", printk 1329 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_shutdown(%s)\n", printk 1410 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_change_params(%s)\n", printk 1491 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_put_char(%d) on %s\n", printk 1524 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n", printk 1535 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n", printk 1562 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_write(%s) count=%d\n", printk 1607 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_write(%s) returning=%d\n", printk 1635 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_write_room(%s)=%d\n", printk 1648 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_chars_in_buffer(%s)\n", printk 1660 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n", printk 1674 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_flush_buffer(%s) entry\n", printk 1697 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_send_xchar(%s,%d)\n", printk 1720 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_throttle(%s) entry\n", printk 1745 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_unthrottle(%s) entry\n", printk 1772 drivers/char/pcmcia/synclink_cs.c printk("get_params(%s)\n", info->device_name); printk 1789 drivers/char/pcmcia/synclink_cs.c printk("get_params(%s)\n", info->device_name); printk 1812 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):set_params %s\n", __FILE__,__LINE__, printk 1817 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):set_params(%s) user buffer copy failed\n", printk 1835 drivers/char/pcmcia/synclink_cs.c printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode); printk 1846 drivers/char/pcmcia/synclink_cs.c printk("set_txidle(%s,%d)\n", info->device_name, idle_mode); printk 1858 drivers/char/pcmcia/synclink_cs.c printk("get_interface(%s)=%d\n", info->device_name, info->if_mode); printk 1870 drivers/char/pcmcia/synclink_cs.c printk("set_interface(%s,%d)\n", info->device_name, if_mode); printk 1892 drivers/char/pcmcia/synclink_cs.c printk("set_txenable(%s,%d)\n", info->device_name, enable); printk 1911 drivers/char/pcmcia/synclink_cs.c printk("tx_abort(%s)\n", info->device_name); printk 1931 drivers/char/pcmcia/synclink_cs.c printk("set_rxenable(%s,%d)\n", info->device_name, enable); printk 1969 drivers/char/pcmcia/synclink_cs.c printk("wait_events(%s,%d)\n", info->device_name, mask); printk 2132 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):%s tiocmget() value=%08X\n", printk 2146 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):%s tiocmset(%x,%x)\n", printk 2176 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_break(%s,%d)\n", printk 2234 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__, printk 2289 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__, printk 2334 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", printk 2352 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__, printk 2367 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n", printk 2415 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n", printk 2427 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_hangup(%s)\n", printk 2477 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_open with invalid line #%d.\n", printk 2494 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", printk 2520 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):block_til_ready(%s) returned %d\n", printk 2526 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):mgslpc_open(%s) success\n", printk 2660 drivers/char/pcmcia/synclink_cs.c printk("Can't allocate rx buffer %s\n", info->device_name); printk 2670 drivers/char/pcmcia/synclink_cs.c printk("release_resources(%s)\n", info->device_name); printk 2710 drivers/char/pcmcia/synclink_cs.c printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n", printk 2838 drivers/char/pcmcia/synclink_cs.c printk(KERN_ERR "%s(%d):Couldn't register serial driver\n", printk 2847 drivers/char/pcmcia/synclink_cs.c printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version, printk 3258 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):rx_stop(%s)\n", printk 3271 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):rx_start(%s)\n", printk 3287 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):tx_start(%s)\n", printk 3325 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):tx_stop(%s)\n", printk 3677 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n", printk 3782 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):Register test failure for device %s Addr=%04X\n", printk 3789 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n", printk 3795 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):device %s passed diagnostics\n", printk 3805 drivers/char/pcmcia/synclink_cs.c printk("%s tx data:\n", info->device_name); printk 3807 drivers/char/pcmcia/synclink_cs.c printk("%s rx data:\n", info->device_name); printk 3816 drivers/char/pcmcia/synclink_cs.c printk("%02X ", (unsigned char)data[i]); printk 3818 drivers/char/pcmcia/synclink_cs.c printk(" "); printk 3821 drivers/char/pcmcia/synclink_cs.c printk("%c", data[i]); printk 3823 drivers/char/pcmcia/synclink_cs.c printk("."); printk 3825 drivers/char/pcmcia/synclink_cs.c printk("\n"); printk 3841 drivers/char/pcmcia/synclink_cs.c printk("%s(%d):tx_timeout(%s)\n", printk 3933 drivers/char/pcmcia/synclink_cs.c printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name); printk 3981 drivers/char/pcmcia/synclink_cs.c printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name); printk 3991 drivers/char/pcmcia/synclink_cs.c printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); printk 4043 drivers/char/pcmcia/synclink_cs.c printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name); printk 4077 drivers/char/pcmcia/synclink_cs.c printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name); printk 4178 drivers/char/pcmcia/synclink_cs.c printk("hdlcdev_tx_timeout(%s)\n", dev->name); printk 4216 drivers/char/pcmcia/synclink_cs.c printk("hdlcdev_rx(%s)\n", dev->name); printk 4219 drivers/char/pcmcia/synclink_cs.c printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); printk 4260 drivers/char/pcmcia/synclink_cs.c printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__); printk 4281 drivers/char/pcmcia/synclink_cs.c printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__); printk 2033 drivers/char/random.c printk(KERN_NOTICE "random: %s: uninitialized " printk 320 drivers/char/raw.c printk(KERN_WARNING "raw: invalid max_raw_minors (must be" printk 328 drivers/char/raw.c printk(KERN_ERR "Not enough memory for raw device structures\n"); printk 343 drivers/char/raw.c printk(KERN_ERR "Error creating raw class.\n"); printk 877 drivers/char/rtc.c printk(KERN_ERR "rtc_init: no PC rtc found\n"); printk 893 drivers/char/rtc.c printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq); printk 913 drivers/char/rtc.c printk(KERN_ERR "rtc: I/O resource %lx is not free.\n", printk 925 drivers/char/rtc.c printk(KERN_WARNING "hpet_register_irq_handler failed " printk 936 drivers/char/rtc.c printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ); printk 960 drivers/char/rtc.c printk(KERN_WARNING "rtc: Failed to register with procfs.\n"); printk 1000 drivers/char/rtc.c printk(KERN_INFO "rtc: %s epoch (%lu) detected\n", printk 1023 drivers/char/rtc.c printk(KERN_INFO "Real Time Clock Driver v" RTC_VERSION "\n"); printk 82 drivers/char/scx200_gpio.c printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n"); printk 496 drivers/char/sonypi.c printk(KERN_WARNING "sonypi command failed at %s : %s (line %d)\n", __FILE__, __func__, __LINE__); \ printk 579 drivers/char/sonypi.c printk(KERN_WARNING "ec_write failed\n"); printk 581 drivers/char/sonypi.c printk(KERN_WARNING "ec_write failed\n"); printk 583 drivers/char/sonypi.c printk(KERN_WARNING "ec_write failed\n"); printk 621 drivers/char/sonypi.c printk(KERN_WARNING "ec_write failed\n"); printk 623 drivers/char/sonypi.c printk(KERN_WARNING "ec_write failed\n"); printk 625 drivers/char/sonypi.c printk(KERN_WARNING "ec_write failed\n"); printk 740 drivers/char/sonypi.c printk(KERN_WARNING "sonypi: failed to power on camera\n"); printk 849 drivers/char/sonypi.c printk(KERN_WARNING printk 859 drivers/char/sonypi.c printk(KERN_INFO printk 1225 drivers/char/sonypi.c printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? " printk 1268 drivers/char/sonypi.c printk(KERN_INFO "sonypi: detected type%d model, " printk 1279 drivers/char/sonypi.c printk(KERN_INFO "sonypi: enabled at irq=%d, port1=0x%x, port2=0x%x\n", printk 1284 drivers/char/sonypi.c printk(KERN_INFO "sonypi: device allocated minor is %d\n", printk 1295 drivers/char/sonypi.c printk(KERN_WARNING "sonypi: please try the sony-laptop module instead " printk 1302 drivers/char/sonypi.c printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); printk 1323 drivers/char/sonypi.c printk(KERN_ERR "sonypi: pci_enable_device failed\n"); printk 1349 drivers/char/sonypi.c printk(KERN_ERR "sonypi: failed to request ioports\n"); printk 1355 drivers/char/sonypi.c printk(KERN_ERR "sonypi: request_irq failed\n"); printk 1363 drivers/char/sonypi.c printk(KERN_ERR "sonypi: misc_register failed\n"); printk 1373 drivers/char/sonypi.c printk(KERN_ERR printk 1382 drivers/char/sonypi.c printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); printk 1502 drivers/char/sonypi.c printk(KERN_INFO printk 1545 drivers/char/sonypi.c printk(KERN_INFO "sonypi: removed.\n"); printk 303 drivers/char/tb0219.c printk(KERN_INFO "TB0219: major number %d\n", major); printk 226 drivers/char/tlclk.c printk(KERN_ERR "tlclk: Interrupt can't be reserved.\n"); printk 782 drivers/char/tlclk.c printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major); printk 794 drivers/char/tlclk.c printk(KERN_ERR "tlclk: request_region 0x%X failed.\n", printk 802 drivers/char/tlclk.c printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n", printk 812 drivers/char/tlclk.c printk(KERN_ERR "tlclk: misc_register returns %d.\n", ret); printk 819 drivers/char/tlclk.c printk(KERN_ERR "tlclk: platform_device_register failed.\n"); printk 827 drivers/char/tlclk.c printk(KERN_ERR "tlclk: failed to create sysfs device attributes.\n"); printk 261 drivers/char/tpm/eventlog/tpm1.c printk(KERN_ERR "%s: ERROR - No Memory for event name\n ", printk 48 drivers/char/ttyprintk.c printk(TPK_PREFIX "[U] %s\n", tpk_buffer); printk 201 drivers/char/ttyprintk.c printk(KERN_ERR "Couldn't register ttyprintk driver\n"); printk 168 drivers/char/uv_mmtimer.c printk(KERN_ERR "remap_pfn_range failed in uv_mmtimer_mmap\n"); printk 190 drivers/char/uv_mmtimer.c printk(KERN_ERR "%s: Hardware unsupported\n", UV_MMTIMER_NAME); printk 198 drivers/char/uv_mmtimer.c printk(KERN_ERR "%s: unable to determine clock frequency\n", printk 208 drivers/char/uv_mmtimer.c printk(KERN_ERR "%s: failed to register device\n", printk 213 drivers/char/uv_mmtimer.c printk(KERN_INFO "%s: v%s, %ld MHz\n", UV_MMTIMER_DESC, printk 148 drivers/clocksource/timer-cs5535.c printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n"); printk 155 drivers/clocksource/timer-cs5535.c printk(KERN_ERR DRV_NAME ": Could not set up IRQ %d\n", printk 163 drivers/clocksource/timer-cs5535.c printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n"); printk 173 drivers/clocksource/timer-cs5535.c printk(KERN_INFO DRV_NAME printk 185 drivers/clocksource/timer-cs5535.c printk(KERN_ERR DRV_NAME ": Unable to set up the MFGPT clock source\n"); printk 218 drivers/clocksource/timer-imx-gpt.c printk(KERN_INFO "%s: changing mode\n", __func__); printk 241 drivers/clocksource/timer-imx-gpt.c printk(KERN_INFO "%s: changing mode\n", __func__); printk 524 drivers/cpufreq/pcc-cpufreq.c printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" printk 243 drivers/cpufreq/pmac32-cpufreq.c printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); printk 302 drivers/cpufreq/pmac32-cpufreq.c printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); printk 189 drivers/cpufreq/sa1110-cpufreq.c printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", printk 220 drivers/cpufreq/sa1110-cpufreq.c printk(KERN_DEBUG "new dri value = %d\n", dri); printk 359 drivers/cpufreq/sa1110-cpufreq.c printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" printk 117 drivers/cpufreq/speedstep-lib.c printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", printk 212 drivers/cpufreq/speedstep-lib.c printk(KERN_DEBUG PFX "couldn't detect FSB speed. " printk 404 drivers/cpuidle/cpuidle-powernv.c printk(KERN_DEBUG "Registration of powernv driver failed.\n"); printk 416 drivers/cpuidle/cpuidle-powernv.c printk(KERN_DEBUG "powernv_idle_driver registered\n"); printk 285 drivers/cpuidle/cpuidle-pseries.c printk(KERN_DEBUG "Registration of pseries driver failed.\n"); printk 297 drivers/cpuidle/cpuidle-pseries.c printk(KERN_DEBUG "pseries_idle_driver registered\n"); printk 70 drivers/cpuidle/governor.c printk(KERN_INFO "cpuidle: using governor %s\n", gov->name); printk 1406 drivers/crypto/amcc/crypto4xx_core.c printk(KERN_ERR "Crypto Function Not supported!\n"); printk 22 drivers/crypto/bcm/util.h printk(__VA_ARGS__); \ printk 40 drivers/crypto/bcm/util.h printk(__VA_ARGS__); \ printk 54 drivers/crypto/caam/desc_constr.h #define PRINT_POS do { printk(KERN_DEBUG "%02d: %s\n", desc_len(desc),\ printk 216 drivers/crypto/geode-aes.c printk(KERN_ERR "Error allocating fallback algo %s\n", name); printk 262 drivers/crypto/geode-aes.c printk(KERN_ERR "Error allocating fallback algo %s\n", name); printk 436 drivers/crypto/ixp4xx_crypto.c printk(KERN_ERR "ixp_crypto: No HW crypto available\n"); printk 459 drivers/crypto/ixp4xx_crypto.c printk(KERN_WARNING "Firmware of %s lacks AES support\n", printk 468 drivers/crypto/ixp4xx_crypto.c printk(KERN_ERR "Firmware of %s lacks crypto support\n", printk 505 drivers/crypto/ixp4xx_crypto.c printk(KERN_ERR "%s not responding\n", npe_name(npe_c)); printk 1455 drivers/crypto/ixp4xx_crypto.c printk(KERN_ERR "Failed to register '%s'\n", printk 1487 drivers/crypto/ixp4xx_crypto.c printk(KERN_ERR "Failed to register '%s'\n", printk 1817 drivers/crypto/n2_core.c printk("NO 'ino'\n"); printk 12 drivers/crypto/omap-des.c #define prn(num) printk(#num "=%d\n", num) printk 13 drivers/crypto/omap-des.c #define prx(num) printk(#num "=%x\n", num) printk 505 drivers/crypto/padlock-aes.c printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n"); printk 518 drivers/crypto/padlock-aes.c printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n"); printk 523 drivers/crypto/padlock-aes.c printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n"); printk 534 drivers/crypto/padlock-aes.c printk(KERN_ERR PFX "VIA PadLock AES initialization failed.\n"); printk 205 drivers/crypto/padlock-sha.c printk(KERN_WARNING PFX "Fallback driver '%s' could not be loaded!\n", printk 532 drivers/crypto/padlock-sha.c printk(KERN_NOTICE PFX "Using VIA PadLock ACE for SHA1/SHA256 algorithms.\n"); printk 540 drivers/crypto/padlock-sha.c printk(KERN_ERR PFX "VIA PadLock SHA1/SHA256 initialization failed.\n"); printk 35 drivers/crypto/vmx/aes.c printk(KERN_ERR printk 175 drivers/dio/dio.c printk(KERN_INFO "Scanning for DIO devices...\n"); printk 241 drivers/dio/dio.c printk(KERN_INFO "select code %3d: ipl %d: ID %02X", dev->scode, dev->ipl, prid); printk 243 drivers/dio/dio.c printk(":%02X", secid); printk 244 drivers/dio/dio.c printk(": %s\n", dev->name); printk 3079 drivers/dma/amba-pl08x.c printk(KERN_WARNING DRIVER_NAME printk 149 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME printk 155 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME printk 166 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME printk 295 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR "DMA: SRAM alloc failed in engine init !\n"); printk 376 drivers/dma/bestcomm/bestcomm.c printk(KERN_INFO "DMA: MPC52xx BestComm driver\n"); printk 384 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME ": " printk 393 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME ": " printk 410 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME ": " printk 418 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME ": " printk 427 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR DRIVER_NAME ": " printk 439 drivers/dma/bestcomm/bestcomm.c printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n", printk 455 drivers/dma/bestcomm/bestcomm.c printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n"); printk 50 drivers/dma/bestcomm/sram.c printk(KERN_ERR "%s: bcom_sram_init: " printk 57 drivers/dma/bestcomm/sram.c printk(KERN_ERR "%s: bcom_sram_init: " printk 65 drivers/dma/bestcomm/sram.c printk(KERN_ERR "%s: bcom_sram_init: " printk 78 drivers/dma/bestcomm/sram.c printk(KERN_ERR "%s: bcom_sram_init: " printk 89 drivers/dma/bestcomm/sram.c printk(KERN_ERR "%s: bcom_sram_init: " printk 436 drivers/dma/iop-adma.c printk(KERN_INFO "IOP ADMA Channel only initialized" printk 742 drivers/dma/iop-adma.c printk(KERN_ERR "IOP: Freeing %d in use descriptors!\n", printk 1482 drivers/dma/ipu/ipu_idmac.c printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n", printk 1491 drivers/dma/ipu/ipu_idmac.c printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n", printk 256 drivers/dma/pl330.c printk("%x:", cmd_line); \ printk 257 drivers/dma/pl330.c printk(x); \ printk 250 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "Unsupported id %d in %s\n", chan->device->id, printk 707 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "%s: next_desc=0x%p; next_desc->phys=0x%llx\n", printk 736 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "%s: prev_desc=0x%p; next_desc=0x%p; " printk 804 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "%s: len %d > max %d !!\n", printk 1056 drivers/dma/ppc4xx/adma.c printk(KERN_INFO "%s: Warn: XORcore is running " printk 1429 drivers/dma/ppc4xx/adma.c printk("%s: entry_idx %d, src_cnt %d, dst_cnt %d\n", printk 1789 drivers/dma/ppc4xx/adma.c printk(KERN_INFO "SPE ADMA Channel only initialized" printk 3282 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "Cannot build " printk 3566 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "SPE: Freeing %d in use descriptors!\n", printk 3690 drivers/dma/ppc4xx/adma.c printk(KERN_ERR "ppc440spe adma%d" printk 3706 drivers/edac/amd64_edac.c printk(KERN_INFO "AMD64 EDAC driver v%s\n", EDAC_AMD64_VERSION); printk 284 drivers/edac/amd76x_edac.c printk(KERN_WARNING printk 287 drivers/edac/amd76x_edac.c printk(KERN_WARNING printk 43 drivers/edac/amd8111_edac.c printk(KERN_ERR AMD8111_EDAC_MOD_STR printk 55 drivers/edac/amd8111_edac.c printk(KERN_ERR AMD8111_EDAC_MOD_STR printk 65 drivers/edac/amd8111_edac.c printk(KERN_ERR AMD8111_EDAC_MOD_STR printk 75 drivers/edac/amd8111_edac.c printk(KERN_ERR AMD8111_EDAC_MOD_STR printk 165 drivers/edac/amd8111_edac.c printk(KERN_INFO "Error(s) in PCI bridge status and command" printk 167 drivers/edac/amd8111_edac.c printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n", printk 181 drivers/edac/amd8111_edac.c printk(KERN_INFO "Error(s) in hypertransport link control" printk 183 drivers/edac/amd8111_edac.c printk(KERN_INFO "LKFAIL: %d\n", printk 195 drivers/edac/amd8111_edac.c printk(KERN_INFO "Error(s) in PCI interrupt and bridge control" printk 197 drivers/edac/amd8111_edac.c printk(KERN_INFO "DTSTAT: %d\n", printk 209 drivers/edac/amd8111_edac.c printk(KERN_INFO printk 212 drivers/edac/amd8111_edac.c printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" printk 242 drivers/edac/amd8111_edac.c printk(KERN_INFO "%s: failed to request legacy I/O region " printk 248 drivers/edac/amd8111_edac.c printk(KERN_INFO "%s: port %d is buggy, not supported" printk 284 drivers/edac/amd8111_edac.c printk(KERN_INFO printk 287 drivers/edac/amd8111_edac.c printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n", printk 346 drivers/edac/amd8111_edac.c printk(KERN_ERR "EDAC device not found:" printk 354 drivers/edac/amd8111_edac.c printk(KERN_ERR "failed to enable:" printk 389 drivers/edac/amd8111_edac.c printk(KERN_ERR "failed to add edac_dev for %s\n", printk 394 drivers/edac/amd8111_edac.c printk(KERN_INFO "added one edac_dev on AMD8111 " printk 441 drivers/edac/amd8111_edac.c printk(KERN_ERR "EDAC device not found:" printk 449 drivers/edac/amd8111_edac.c printk(KERN_ERR "failed to enable:" printk 481 drivers/edac/amd8111_edac.c printk(KERN_ERR "failed to add edac_pci for %s\n", printk 486 drivers/edac/amd8111_edac.c printk(KERN_INFO "added one edac_pci on AMD8111 " printk 573 drivers/edac/amd8111_edac.c printk(KERN_INFO "AMD8111 EDAC driver " AMD8111_EDAC_REVISION "\n"); printk 574 drivers/edac/amd8111_edac.c printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); printk 33 drivers/edac/amd8131_edac.c printk(KERN_ERR AMD8131_EDAC_MOD_STR printk 43 drivers/edac/amd8131_edac.c printk(KERN_ERR AMD8131_EDAC_MOD_STR printk 166 drivers/edac/amd8131_edac.c printk(KERN_INFO "Error(s) in mem limit register " printk 168 drivers/edac/amd8131_edac.c printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" printk 186 drivers/edac/amd8131_edac.c printk(KERN_INFO "Error(s) in interrupt and control register " printk 188 drivers/edac/amd8131_edac.c printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS); printk 199 drivers/edac/amd8131_edac.c printk(KERN_INFO "Error(s) in link conf and control register " printk 201 drivers/edac/amd8131_edac.c printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A); printk 212 drivers/edac/amd8131_edac.c printk(KERN_INFO "Error(s) in link conf and control register " printk 214 drivers/edac/amd8131_edac.c printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B); printk 256 drivers/edac/amd8131_edac.c printk(KERN_ERR "failed to enable:" printk 286 drivers/edac/amd8131_edac.c printk(KERN_ERR "failed edac_pci_add_device() for %s\n", printk 292 drivers/edac/amd8131_edac.c printk(KERN_INFO "added one device on AMD8131 " printk 347 drivers/edac/amd8131_edac.c printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n"); printk 348 drivers/edac/amd8131_edac.c printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); printk 1042 drivers/edac/cpc925_edac.c printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n"); printk 1043 drivers/edac/cpc925_edac.c printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n"); printk 1050 drivers/edac/cpc925_edac.c printk(KERN_WARNING "Failed to register %s\n", printk 21 drivers/edac/debugfs.c printk(KERN_DEBUG printk 613 drivers/edac/e752x_edac.c printk(KERN_WARNING "%sError %s\n", printk 1276 drivers/edac/e752x_edac.c printk(KERN_INFO "Contact your BIOS vendor to see if the " printk 1366 drivers/edac/e752x_edac.c printk(KERN_WARNING printk 1368 drivers/edac/e752x_edac.c printk(KERN_WARNING printk 507 drivers/edac/e7xxx_edac.c printk(KERN_WARNING printk 510 drivers/edac/e7xxx_edac.c printk(KERN_WARNING printk 49 drivers/edac/edac_mc.h printk(level "EDAC " prefix ": " fmt, ##arg) printk 52 drivers/edac/edac_mc.h printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg) printk 55 drivers/edac/edac_mc.h printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg) printk 58 drivers/edac/edac_mc.h printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg) printk 61 drivers/edac/edac_mc.h printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg) printk 82 drivers/edac/edac_module.c printk(KERN_ERR "Error registering toplevel EDAC sysfs dir\n"); printk 329 drivers/edac/i3000_edac.c printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n", printk 435 drivers/edac/i3000_edac.c printk(KERN_WARNING printk 438 drivers/edac/i3000_edac.c printk(KERN_WARNING printk 277 drivers/edac/i3200_edac.c printk(KERN_ERR printk 285 drivers/edac/i3200_edac.c printk(KERN_ERR "i3200: cannot map mmio space at 0x%llx\n", printk 1457 drivers/edac/i5000_edac.c printk(KERN_WARNING printk 1460 drivers/edac/i5000_edac.c printk(KERN_WARNING printk 1016 drivers/edac/i5100_edac.c printk(KERN_INFO "i5100_edac: ECC not enabled.\n"); printk 1349 drivers/edac/i5400_edac.c printk(KERN_WARNING printk 1352 drivers/edac/i5400_edac.c printk(KERN_WARNING printk 1109 drivers/edac/i7300_edac.c printk(KERN_WARNING printk 1112 drivers/edac/i7300_edac.c printk(KERN_WARNING printk 334 drivers/edac/i82443bxgx_edac.c printk(KERN_WARNING printk 337 drivers/edac/i82443bxgx_edac.c printk(KERN_WARNING printk 236 drivers/edac/i82860_edac.c printk(KERN_WARNING printk 239 drivers/edac/i82860_edac.c printk(KERN_WARNING printk 447 drivers/edac/i82875p_edac.c printk(KERN_WARNING printk 450 drivers/edac/i82875p_edac.c printk(KERN_WARNING printk 1214 drivers/edac/mce_amd.c printk(KERN_WARNING "Decoding supported only on Scalable MCA processors.\n"); printk 1220 drivers/edac/mce_amd.c printk(KERN_WARNING "Huh? What family is it: 0x%x?!\n", c->x86); printk 39 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Error in PCI %d Interface\n", pdata->pci_hose); printk 40 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Cause register: 0x%08x\n", cause); printk 41 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Address Low: 0x%08x\n", printk 43 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Address High: 0x%08x\n", printk 45 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Attribute: 0x%08x\n", printk 47 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Command: 0x%08x\n", printk 87 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to get resource for " printk 133 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to get resource for " printk 143 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Error while requesting mem region\n", printk 153 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__); printk 160 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: PCI fixup failed\n", __func__); printk 183 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to request irq %d for " printk 188 drivers/edac/mv64x60_edac.c printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for PCI Err\n", printk 240 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Error in internal SRAM\n"); printk 241 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Cause register: 0x%08x\n", cause); printk 242 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Address Low: 0x%08x\n", printk 244 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Address High: 0x%08x\n", printk 246 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Data Low: 0x%08x\n", printk 248 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Data High: 0x%08x\n", printk 250 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Parity: 0x%08x\n", printk 298 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to get resource for " printk 308 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Error while request mem region\n", printk 318 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to setup SRAM err regs\n", printk 349 drivers/edac/mv64x60_edac.c printk(KERN_ERR printk 356 drivers/edac/mv64x60_edac.c printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for SRAM Err\n", printk 406 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Error on CPU interface\n"); printk 407 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Cause register: 0x%08x\n", cause); printk 408 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Address Low: 0x%08x\n", printk 410 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Address High: 0x%08x\n", printk 412 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Data Low: 0x%08x\n", printk 414 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Data High: 0x%08x\n", printk 416 drivers/edac/mv64x60_edac.c printk(KERN_ERR "Parity: 0x%08x\n", printk 465 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to get resource for " printk 475 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Error while requesting mem region\n", printk 485 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__); printk 492 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to get resource for " printk 502 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Error while requesting mem region\n", printk 512 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__); printk 543 drivers/edac/mv64x60_edac.c printk(KERN_ERR printk 550 drivers/edac/mv64x60_edac.c printk(KERN_INFO EDAC_MOD_STR printk 717 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: No memory for CPU err\n", __func__); printk 731 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to get resource for " printk 741 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Error while requesting mem region\n", printk 751 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to setup MC err regs\n", __func__); printk 759 drivers/edac/mv64x60_edac.c printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__); printk 802 drivers/edac/mv64x60_edac.c printk(KERN_ERR "%s: Unable to request irq %d for " printk 808 drivers/edac/mv64x60_edac.c printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for MC Err\n", printk 856 drivers/edac/mv64x60_edac.c printk(KERN_INFO "Marvell MV64x60 EDAC driver " MV64x60_REVISION "\n"); printk 857 drivers/edac/mv64x60_edac.c printk(KERN_INFO "\t(C) 2006-2007 MontaVista Software\n"); printk 343 drivers/edac/r82600_edac.c printk(KERN_WARNING printk 346 drivers/edac/r82600_edac.c printk(KERN_WARNING printk 263 drivers/edac/x38_edac.c printk(KERN_ERR printk 271 drivers/edac/x38_edac.c printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n", printk 449 drivers/eisa/eisa-bus.c printk(KERN_INFO "EISA bus registered\n"); printk 36 drivers/firewire/core-card.c printk(kern_level KBUILD_MODNAME " %s: %pV", \ printk 240 drivers/firewire/init_ohci1394_dma.c printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394" printk 282 drivers/firewire/init_ohci1394_dma.c printk(KERN_INFO "init_ohci1394_dma: finished initializing OHCI DMA\n"); printk 745 drivers/firmware/edd.c printk(KERN_INFO "BIOS EDD facility v%s %s, %d devices found\n", printk 112 drivers/firmware/efi/cper-arm.c printk("%stransaction type: %s\n", pfx, printk 123 drivers/firmware/efi/cper-arm.c printk("%soperation type: %s\n", pfx, printk 129 drivers/firmware/efi/cper-arm.c printk("%soperation type: %s\n", pfx, printk 135 drivers/firmware/efi/cper-arm.c printk("%soperation type: %s\n", pfx, printk 147 drivers/firmware/efi/cper-arm.c printk("%scache level: %d\n", pfx, level); printk 150 drivers/firmware/efi/cper-arm.c printk("%sTLB level: %d\n", pfx, level); printk 153 drivers/firmware/efi/cper-arm.c printk("%saffinity level at which the bus error occurred: %d\n", printk 163 drivers/firmware/efi/cper-arm.c printk("%sprocessor context corrupted\n", pfx); printk 165 drivers/firmware/efi/cper-arm.c printk("%sprocessor context not corrupted\n", pfx); printk 172 drivers/firmware/efi/cper-arm.c printk("%sthe error has been corrected\n", pfx); printk 174 drivers/firmware/efi/cper-arm.c printk("%sthe error has not been corrected\n", pfx); printk 181 drivers/firmware/efi/cper-arm.c printk("%sPC is precise\n", pfx); printk 183 drivers/firmware/efi/cper-arm.c printk("%sPC is imprecise\n", pfx); printk 190 drivers/firmware/efi/cper-arm.c printk("%sProgram execution can be restarted reliably at the PC associated with the error.\n", pfx); printk 201 drivers/firmware/efi/cper-arm.c printk("%sparticipation type: %s\n", pfx, printk 210 drivers/firmware/efi/cper-arm.c printk("%srequest timed out\n", pfx); printk 217 drivers/firmware/efi/cper-arm.c printk("%saddress space: %s\n", pfx, printk 225 drivers/firmware/efi/cper-arm.c printk("%smemory access attributes:0x%x\n", pfx, mem_attributes); printk 232 drivers/firmware/efi/cper-arm.c printk("%saccess mode: normal\n", pfx); printk 234 drivers/firmware/efi/cper-arm.c printk("%saccess mode: secure\n", pfx); printk 246 drivers/firmware/efi/cper-arm.c printk("%sMIDR: 0x%016llx\n", pfx, proc->midr); printk 251 drivers/firmware/efi/cper-arm.c printk("%ssection length: %d\n", pfx, proc->section_length); printk 252 drivers/firmware/efi/cper-arm.c printk("%ssection length is too small\n", pfx); printk 253 drivers/firmware/efi/cper-arm.c printk("%sfirmware-generated error record is incorrect\n", pfx); printk 254 drivers/firmware/efi/cper-arm.c printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num); printk 259 drivers/firmware/efi/cper-arm.c printk("%sMultiprocessor Affinity Register (MPIDR): 0x%016llx\n", printk 263 drivers/firmware/efi/cper-arm.c printk("%serror affinity level: %d\n", pfx, printk 267 drivers/firmware/efi/cper-arm.c printk("%srunning state: 0x%x\n", pfx, proc->running_state); printk 268 drivers/firmware/efi/cper-arm.c printk("%sPower State Coordination Interface state: %d\n", printk 276 drivers/firmware/efi/cper-arm.c printk("%sError info structure %d:\n", pfx, i); printk 278 drivers/firmware/efi/cper-arm.c printk("%snum errors: %d\n", pfx, err_info->multiple_error + 1); printk 282 drivers/firmware/efi/cper-arm.c printk("%sfirst error captured\n", newpfx); printk 284 drivers/firmware/efi/cper-arm.c printk("%slast error captured\n", newpfx); printk 286 drivers/firmware/efi/cper-arm.c printk("%spropagated error captured\n", printk 289 drivers/firmware/efi/cper-arm.c printk("%soverflow occurred, error info is incomplete\n", printk 293 drivers/firmware/efi/cper-arm.c printk("%serror_type: %d, %s\n", newpfx, err_info->type, printk 297 drivers/firmware/efi/cper-arm.c printk("%serror_info: 0x%016llx\n", newpfx, printk 304 drivers/firmware/efi/cper-arm.c printk("%svirtual fault address: 0x%016llx\n", printk 307 drivers/firmware/efi/cper-arm.c printk("%sphysical fault address: 0x%016llx\n", printk 317 drivers/firmware/efi/cper-arm.c printk("%sContext info structure %d:\n", pfx, i); printk 319 drivers/firmware/efi/cper-arm.c printk("%ssection length is too small\n", newpfx); printk 320 drivers/firmware/efi/cper-arm.c printk("%sfirmware-generated error record is incorrect\n", pfx); printk 324 drivers/firmware/efi/cper-arm.c printk("%sInvalid context type: %d (max: %d)\n", printk 328 drivers/firmware/efi/cper-arm.c printk("%sregister context type: %s\n", newpfx, printk 337 drivers/firmware/efi/cper-arm.c printk("%sVendor specific error info has %u bytes:\n", pfx, printk 154 drivers/firmware/efi/cper-x86.c printk("%s%s: %s\n", pfx, str, (check & bit) ? "true" : "false"); printk 162 drivers/firmware/efi/cper-x86.c printk("%sError Type: %u, %s\n", pfx, err_type, printk 197 drivers/firmware/efi/cper-x86.c printk("%sTransaction Type: %u, %s\n", pfx, trans_type, printk 211 drivers/firmware/efi/cper-x86.c printk("%sOperation: %u, %s\n", pfx, op, printk 216 drivers/firmware/efi/cper-x86.c printk("%sLevel: %llu\n", pfx, CHECK_LEVEL(check)); printk 239 drivers/firmware/efi/cper-x86.c printk("%sParticipation Type: %u, %s\n", pfx, part_type, printk 250 drivers/firmware/efi/cper-x86.c printk("%sAddress Space: %u, %s\n", pfx, addr_space, printk 265 drivers/firmware/efi/cper-x86.c printk("%sLocal APIC_ID: 0x%llx\n", pfx, proc->lapic_id); printk 268 drivers/firmware/efi/cper-x86.c printk("%sCPUID Info:\n", pfx); printk 277 drivers/firmware/efi/cper-x86.c printk("%sError Information Structure %d:\n", pfx, i); printk 280 drivers/firmware/efi/cper-x86.c printk("%sError Structure Type: %s\n", newpfx, printk 285 drivers/firmware/efi/cper-x86.c printk("%sError Structure Type: %pUl\n", newpfx, printk 290 drivers/firmware/efi/cper-x86.c printk("%sCheck Information: 0x%016llx\n", newpfx, printk 303 drivers/firmware/efi/cper-x86.c printk("%sTarget Identifier: 0x%016llx\n", printk 308 drivers/firmware/efi/cper-x86.c printk("%sRequestor Identifier: 0x%016llx\n", printk 313 drivers/firmware/efi/cper-x86.c printk("%sResponder Identifier: 0x%016llx\n", printk 318 drivers/firmware/efi/cper-x86.c printk("%sInstruction Pointer: 0x%016llx\n", printk 330 drivers/firmware/efi/cper-x86.c printk("%sContext Information Structure %d:\n", pfx, i); printk 332 drivers/firmware/efi/cper-x86.c printk("%sRegister Context Type: %s\n", newpfx, printk 336 drivers/firmware/efi/cper-x86.c printk("%sRegister Array Size: 0x%04x\n", newpfx, printk 341 drivers/firmware/efi/cper-x86.c printk("%sMSR Address: 0x%08x\n", newpfx, printk 346 drivers/firmware/efi/cper-x86.c printk("%sMM Register Address: 0x%016llx\n", newpfx, printk 350 drivers/firmware/efi/cper-x86.c printk("%sRegister Array:\n", newpfx); printk 98 drivers/firmware/efi/cper.c printk("%s\n", buf); printk 107 drivers/firmware/efi/cper.c printk("%s\n", buf); printk 149 drivers/firmware/efi/cper.c printk("%s""processor_type: %d, %s\n", pfx, proc->proc_type, printk 153 drivers/firmware/efi/cper.c printk("%s""processor_isa: %d, %s\n", pfx, proc->proc_isa, printk 157 drivers/firmware/efi/cper.c printk("%s""error_type: 0x%02x\n", pfx, proc->proc_error_type); printk 163 drivers/firmware/efi/cper.c printk("%s""operation: %d, %s\n", pfx, proc->operation, printk 167 drivers/firmware/efi/cper.c printk("%s""flags: 0x%02x\n", pfx, proc->flags); printk 172 drivers/firmware/efi/cper.c printk("%s""level: %d\n", pfx, proc->level); printk 174 drivers/firmware/efi/cper.c printk("%s""version_info: 0x%016llx\n", pfx, proc->cpu_version); printk 176 drivers/firmware/efi/cper.c printk("%s""processor_id: 0x%016llx\n", pfx, proc->proc_id); printk 178 drivers/firmware/efi/cper.c printk("%s""target_address: 0x%016llx\n", printk 181 drivers/firmware/efi/cper.c printk("%s""requestor_id: 0x%016llx\n", printk 184 drivers/firmware/efi/cper.c printk("%s""responder_id: 0x%016llx\n", printk 187 drivers/firmware/efi/cper.c printk("%s""IP: 0x%016llx\n", pfx, proc->ip); printk 326 drivers/firmware/efi/cper.c printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status); printk 328 drivers/firmware/efi/cper.c printk("%s""physical_address: 0x%016llx\n", printk 331 drivers/firmware/efi/cper.c printk("%s""physical_address_mask: 0x%016llx\n", printk 335 drivers/firmware/efi/cper.c printk("%s%s\n", pfx, rcd_decode_str); printk 338 drivers/firmware/efi/cper.c printk("%s""error_type: %d, %s\n", pfx, etype, printk 342 drivers/firmware/efi/cper.c printk("%s%s\n", pfx, rcd_decode_str); printk 363 drivers/firmware/efi/cper.c printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, printk 367 drivers/firmware/efi/cper.c printk("%s""version: %d.%d\n", pfx, printk 370 drivers/firmware/efi/cper.c printk("%s""command: 0x%04x, status: 0x%04x\n", pfx, printk 374 drivers/firmware/efi/cper.c printk("%s""device_id: %04x:%02x:%02x.%x\n", pfx, printk 377 drivers/firmware/efi/cper.c printk("%s""slot: %d\n", pfx, printk 379 drivers/firmware/efi/cper.c printk("%s""secondary_bus: 0x%02x\n", pfx, printk 381 drivers/firmware/efi/cper.c printk("%s""vendor_id: 0x%04x, device_id: 0x%04x\n", pfx, printk 384 drivers/firmware/efi/cper.c printk("%s""class_code: %02x%02x%02x\n", pfx, p[2], p[1], p[0]); printk 387 drivers/firmware/efi/cper.c printk("%s""serial number: 0x%04x, 0x%04x\n", pfx, printk 390 drivers/firmware/efi/cper.c printk( printk 400 drivers/firmware/efi/cper.c printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n", printk 402 drivers/firmware/efi/cper.c printk("%saer_uncor_severity: 0x%08x\n", printk 404 drivers/firmware/efi/cper.c printk("%sTLP Header: %08x %08x %08x %08x\n", pfx, printk 425 drivers/firmware/efi/cper.c printk("%s%ststamp: %02d%02d-%02d-%02d %02d:%02d:%02d\n", pfx, printk 443 drivers/firmware/efi/cper.c printk("%s""Error %d, type: %s\n", pfx, sec_no, printk 446 drivers/firmware/efi/cper.c printk("%s""fru_id: %pUl\n", pfx, gdata->fru_id); printk 448 drivers/firmware/efi/cper.c printk("%s""fru_text: %.20s\n", pfx, gdata->fru_text); printk 454 drivers/firmware/efi/cper.c printk("%s""section_type: general processor error\n", newpfx); printk 462 drivers/firmware/efi/cper.c printk("%s""section_type: memory error\n", newpfx); printk 472 drivers/firmware/efi/cper.c printk("%s""section_type: PCIe error\n", newpfx); printk 481 drivers/firmware/efi/cper.c printk("%ssection_type: ARM processor error\n", newpfx); printk 491 drivers/firmware/efi/cper.c printk("%ssection_type: IA32/X64 processor error\n", newpfx); printk 500 drivers/firmware/efi/cper.c printk("%ssection type: unknown, %pUl\n", newpfx, sec_type); printk 501 drivers/firmware/efi/cper.c printk("%ssection length: %#x\n", newpfx, printk 523 drivers/firmware/efi/cper.c printk("%s%s\n", pfx, printk 526 drivers/firmware/efi/cper.c printk("%s""event severity: %s\n", pfx, cper_severity_str(severity)); printk 167 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: Cannot edit the wrong variable!\n"); printk 172 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: DataSize & Attributes must be valid!\n"); printk 178 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: Malformed variable content\n"); printk 253 drivers/firmware/efi/efivars.c printk(KERN_WARNING "efivars: set_variable() failed: status=%d\n", err); printk 402 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: Malformed variable content\n"); printk 424 drivers/firmware/efi/efivars.c printk(KERN_WARNING "efivars: failed to create sysfs entry.\n"); printk 572 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: unable to create new_var sysfs file" printk 579 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: unable to create del_var sysfs file" printk 690 drivers/firmware/efi/efivars.c printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION, printk 695 drivers/firmware/efi/efivars.c printk(KERN_ERR "efivars: Subsystem registration failed.\n"); printk 39 drivers/firmware/efi/reboot.c printk(KERN_CRIT "efi: %s reset requested but pending " printk 408 drivers/firmware/efi/vars.c printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n", printk 443 drivers/firmware/efi/vars.c printk(KERN_ERR "efivars: Memory allocation failed.\n"); printk 503 drivers/firmware/efi/vars.c printk(KERN_WARNING "efivars: get_next_variable: status=%lx\n", printk 1213 drivers/firmware/efi/vars.c printk(KERN_ERR "efivars not registered\n"); printk 154 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: out of memory\n"); printk 162 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: failed to allocate name buffer\n"); printk 260 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd); printk 264 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd); printk 270 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n", printk 275 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd); printk 279 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd); printk 283 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd); printk 287 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd); printk 296 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n", printk 344 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: Get Variable failed\n"); printk 406 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: Get Next Variable Name failed\n"); printk 470 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: Set Variable failed\n"); printk 520 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: Set Event Log failed\n"); printk 648 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n"); printk 650 drivers/firmware/google/gsmi.c printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n", printk 762 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi: Board is too old\n"); printk 882 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: unable to register platform driver\n"); printk 890 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: unable to register platform device\n"); printk 909 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: failed to allocate name buffer\n"); printk 915 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: failed to allocate data buffer\n"); printk 921 drivers/firmware/google/gsmi.c printk(KERN_ERR "gsmi: failed to allocate param buffer\n"); printk 963 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi version " DRIVER_VERSION printk 973 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi: Failed to create firmware kobj\n"); printk 980 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi: Failed to setup eventlog"); printk 987 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi: Failed to add attrs"); printk 994 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi: Failed to register efivars\n"); printk 1005 drivers/firmware/google/gsmi.c printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n"); printk 233 drivers/firmware/iscsi_ibft.c printk(KERN_ERR "iBFT error: We expected the %s " \ printk 239 drivers/firmware/iscsi_ibft.c printk(KERN_ERR "iBFT error: We expected the %s " \ printk 451 drivers/firmware/iscsi_ibft.c printk(KERN_ERR "iBFT module supports only revision 1, " \ printk 460 drivers/firmware/iscsi_ibft.c printk(KERN_ERR "iBFT has incorrect checksum (0x%x)!\n", csum); printk 698 drivers/firmware/iscsi_ibft.c printk(KERN_ERR "iBFT has unknown structure type (%d). " \ printk 758 drivers/firmware/iscsi_ibft.c printk(KERN_ERR "iBFT error: Control header is invalid!\n"); printk 883 drivers/firmware/iscsi_ibft.c printk(KERN_INFO "No iBFT detected.\n"); printk 71 drivers/firmware/pcdp.c printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n"); printk 76 drivers/firmware/pcdp.c printk(KERN_INFO "PCDP: VGA console\n"); printk 96 drivers/firmware/pcdp.c printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, efi.hcdp); printk 102 drivers/firmware/pcdp.c printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n"); printk 226 drivers/gpio/gpio-amd8111.c printk(KERN_INFO "AMD-8111 GPIO detected\n"); printk 229 drivers/gpio/gpio-amd8111.c printk(KERN_ERR "GPIO registering failed (%d)\n", printk 178 drivers/gpio/gpio-bt8xx.c printk(KERN_ERR "bt8xxgpio: Can't enable device.\n"); printk 184 drivers/gpio/gpio-bt8xx.c printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n", printk 194 drivers/gpio/gpio-bt8xx.c printk(KERN_ERR "bt8xxgpio: ioremap() failed\n"); printk 210 drivers/gpio/gpio-bt8xx.c printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n"); printk 371 drivers/gpio/gpio-htc-egpio.c printk(KERN_ERR "EGPIO failed to setup\n"); printk 217 drivers/gpio/gpio-vr41xx.c printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", printk 1066 drivers/gpu/drm/amd/amdgpu/amdgpu.h #define DREG32(reg) printk(KERN_INFO "REGISTER: " #reg " : 0x%08X\n", amdgpu_mm_rreg(adev, (reg), 0)) printk 136 drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c printk("failed to evaluate ATPX got %s\n", printk 192 drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c printk("ATPX buffer is too small: %zu\n", size); printk 225 drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c printk("ATPX Hybrid Graphics, forcing to ATPX\n"); printk 229 drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c printk("ATPX Hybrid Graphics\n"); printk 271 drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c printk("ATPX buffer is too small: %zu\n", size); printk 280 drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c printk("ATPX version %u, functions 0x%08x\n", printk 258 drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); printk 51 drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c printk("\tui class: %s\n", s); printk 52 drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c printk("\tinternal class:"); printk 95 drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c printk("\tcaps:"); printk 108 drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c printk("\tstatus:"); printk 2619 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c printk("switching from power state:\n"); printk 2621 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c printk("switching to power state:\n"); printk 94 drivers/gpu/drm/amd/amdgpu/atom.c printk(" "); printk 97 drivers/gpu/drm/amd/amdgpu/atom.c #define DEBUG(...) do if (amdgpu_atom_debug) { printk(KERN_DEBUG __VA_ARGS__); } while (0) printk 98 drivers/gpu/drm/amd/amdgpu/atom.c #define SDEBUG(...) do if (amdgpu_atom_debug) { printk(KERN_DEBUG); debug_print_spaces(debug_depth); printk(__VA_ARGS__); } while (0) printk 610 drivers/gpu/drm/amd/amdgpu/atom.c printk("ATOM BIOS beeped!\n"); printk 748 drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c printk(KERN_WARNING "amdgpu: No suitable DMA available.\n"); printk 1270 drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c printk(KERN_WARNING "amdgpu: No suitable DMA available.\n"); printk 2901 drivers/gpu/drm/amd/amdgpu/kv_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 2904 drivers/gpu/drm/amd/amdgpu/kv_dpm.c printk("\t\tpower level %d sclk: %u vddc: %u\n", printk 100 drivers/gpu/drm/amd/amdgpu/psp_v12_0.c printk("sos fw version = 0x%x.\n", psp->sos_fw_version); printk 203 drivers/gpu/drm/amd/amdgpu/psp_v3_1.c printk("sos fw version = 0x%x.\n", psp->sos_fw_version); printk 7958 drivers/gpu/drm/amd/amdgpu/si_dpm.c printk("si_cps is NULL\n"); printk 433 drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c printk("[Thermal_EnableAlert] FW CTF Already Enabled!\n"); printk 463 drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c printk("[Thermal_EnableAlert] FW CTF Already disabled!\n"); printk 90 drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c printk("Failed to send Message %x.\n", msg); printk 111 drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c printk("Failed to send Message %x.\n", msg); printk 196 drivers/gpu/drm/drm_print.c printk("%s" "[" DRM_NAME ":%ps] %pV", printk 220 drivers/gpu/drm/drm_print.c printk(KERN_DEBUG "[" DRM_NAME ":%ps] %pV", printk 239 drivers/gpu/drm/drm_print.c printk(KERN_DEBUG "[" DRM_NAME ":%ps] %pV", printk 255 drivers/gpu/drm/drm_print.c printk(KERN_ERR "[" DRM_NAME ":%ps] *ERROR* %pV", printk 484 drivers/gpu/drm/i810/i810_dma.c printk("constext state dropped!!!\n"); printk 515 drivers/gpu/drm/i810/i810_dma.c printk("texture state dropped!!!\n"); printk 272 drivers/gpu/drm/lima/lima_vm.c printk(KERN_INFO "lima vm pd %03x:%08x\n", idx, pd[idx]); printk 278 drivers/gpu/drm/lima/lima_vm.c printk(KERN_INFO " pt %03x:%08x\n", k, pte); printk 208 drivers/gpu/drm/msm/adreno/a2xx_gpu.c printk("CP_SCRATCH_REG%d: %u\n", i, printk 385 drivers/gpu/drm/msm/adreno/a2xx_gpu.c printk("status: %08x\n", printk 298 drivers/gpu/drm/msm/adreno/a3xx_gpu.c printk("CP_SCRATCH_REG%d: %u\n", i, printk 404 drivers/gpu/drm/msm/adreno/a3xx_gpu.c printk("status: %08x\n", printk 298 drivers/gpu/drm/msm/adreno/a4xx_gpu.c printk("CP_SCRATCH_REG%d: %u\n", i, printk 355 drivers/gpu/drm/msm/adreno/a4xx_gpu.c printk("CP | Protected mode error| %s | addr=%x\n", printk 476 drivers/gpu/drm/msm/adreno/a4xx_gpu.c printk("status: %08x\n", printk 756 drivers/gpu/drm/msm/adreno/a5xx_gpu.c printk("CP_SCRATCH_REG%d: %u\n", i, printk 762 drivers/gpu/drm/msm/adreno/adreno_gpu.c printk("revision: %d (%d.%d.%d.%d)\n", printk 770 drivers/gpu/drm/msm/adreno/adreno_gpu.c printk("rb %d: fence: %d/%d\n", i, printk 774 drivers/gpu/drm/msm/adreno/adreno_gpu.c printk("rptr: %d\n", get_rptr(adreno_gpu, ring)); printk 775 drivers/gpu/drm/msm/adreno/adreno_gpu.c printk("rb wptr: %d\n", get_wptr(ring)); printk 789 drivers/gpu/drm/msm/adreno/adreno_gpu.c printk("IO:region %s 00000000 00020000\n", gpu->name); printk 797 drivers/gpu/drm/msm/adreno/adreno_gpu.c printk("IO:R %08x %08x\n", addr<<2, val); printk 148 drivers/gpu/drm/msm/msm_drv.c printk(KERN_DEBUG "IO:region %s %p %08lx\n", dbgname, ptr, size); printk 156 drivers/gpu/drm/msm/msm_drv.c printk(KERN_DEBUG "IO:W %p %08x\n", addr, data); printk 41 drivers/gpu/drm/nouveau/include/nvkm/core/client.h printk(KERN_##p "nouveau: %s:%08x:%08x: "f, _client->name, \ printk 306 drivers/gpu/drm/nouveau/nouveau_acpi.c printk("MXM: GUID detected in BIOS\n"); printk 48 drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c printk(fmt, ##args); \ printk 954 drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c printk(KERN_ERR "%016llx %016llx %c%c%c%c%c%c%c%c%c %p\n", printk 66 drivers/gpu/drm/r128/r128_cce.c printk("GUI_STAT = 0x%08x\n", printk 68 drivers/gpu/drm/r128/r128_cce.c printk("PM4_STAT = 0x%08x\n", printk 70 drivers/gpu/drm/r128/r128_cce.c printk("PM4_BUFFER_DL_WPTR = 0x%08x\n", printk 72 drivers/gpu/drm/r128/r128_cce.c printk("PM4_BUFFER_DL_RPTR = 0x%08x\n", printk 74 drivers/gpu/drm/r128/r128_cce.c printk("PM4_MICRO_CNTL = 0x%08x\n", printk 76 drivers/gpu/drm/r128/r128_cce.c printk("PM4_BUFFER_CNTL = 0x%08x\n", printk 97 drivers/gpu/drm/radeon/atom.c printk(" "); printk 100 drivers/gpu/drm/radeon/atom.c #define DEBUG(...) do if (atom_debug) { printk(KERN_DEBUG __VA_ARGS__); } while (0) printk 101 drivers/gpu/drm/radeon/atom.c #define SDEBUG(...) do if (atom_debug) { printk(KERN_DEBUG); debug_print_spaces(debug_depth); printk(__VA_ARGS__); } while (0) printk 616 drivers/gpu/drm/radeon/atom.c printk("ATOM BIOS beeped!\n"); printk 5965 drivers/gpu/drm/radeon/ci_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 5968 drivers/gpu/drm/radeon/ci_dpm.c printk("\t\tpower level %d sclk: %u mclk: %u pcie gen: %u pcie lanes: %u\n", printk 5678 drivers/gpu/drm/radeon/cik.c printk("VM fault (0x%02x, vmid %d) at page %u, %s from '%s' (0x%08x) (%d)\n", printk 2857 drivers/gpu/drm/radeon/kv_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 2860 drivers/gpu/drm/radeon/kv_dpm.c printk("\t\tpower level %d sclk: %u vddc: %u\n", printk 2679 drivers/gpu/drm/radeon/ni.c printk("VM fault (0x%02x, vmid %d) at page %u, %s from %s (%d)\n", printk 4291 drivers/gpu/drm/radeon/ni_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 4295 drivers/gpu/drm/radeon/ni_dpm.c printk("\t\tpower level %d sclk: %u mclk: %u vddc: %u vddci: %u pcie gen: %u\n", printk 4298 drivers/gpu/drm/radeon/ni_dpm.c printk("\t\tpower level %d sclk: %u mclk: %u vddc: %u vddci: %u\n", printk 88 drivers/gpu/drm/radeon/r600_dpm.c printk("\tui class: %s\n", s); printk 90 drivers/gpu/drm/radeon/r600_dpm.c printk("\tinternal class:"); printk 133 drivers/gpu/drm/radeon/r600_dpm.c printk("\tcaps:"); printk 146 drivers/gpu/drm/radeon/r600_dpm.c printk("\tstatus:"); printk 118 drivers/gpu/drm/radeon/radeon_atpx_handler.c printk("failed to evaluate ATPX got %s\n", printk 174 drivers/gpu/drm/radeon/radeon_atpx_handler.c printk("ATPX buffer is too small: %zu\n", size); printk 205 drivers/gpu/drm/radeon/radeon_atpx_handler.c printk("ATPX Hybrid Graphics\n"); printk 242 drivers/gpu/drm/radeon/radeon_atpx_handler.c printk("ATPX buffer is too small: %zu\n", size); printk 251 drivers/gpu/drm/radeon/radeon_atpx_handler.c printk("ATPX version %u, functions 0x%08x\n", printk 169 drivers/gpu/drm/radeon/radeon_bios.c printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); printk 683 drivers/gpu/drm/radeon/radeon_bios.c printk("BIOS signature incorrect %x %x\n", rdev->bios[0], rdev->bios[1]); printk 782 drivers/gpu/drm/radeon/radeon_cs.c printk("\t0x%08x <---\n", radeon_get_ib_value(p, i)); printk 784 drivers/gpu/drm/radeon/radeon_cs.c printk("\t0x%08x\n", radeon_get_ib_value(p, i)); printk 1074 drivers/gpu/drm/radeon/radeon_pm.c printk("switching from power state:\n"); printk 1076 drivers/gpu/drm/radeon/radeon_pm.c printk("switching to power state:\n"); printk 1362 drivers/gpu/drm/radeon/radeon_pm.c printk("== power state %d ==\n", i); printk 947 drivers/gpu/drm/radeon/rs780_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 948 drivers/gpu/drm/radeon/rs780_dpm.c printk("\t\tpower level 0 sclk: %u vddc_index: %d\n", printk 950 drivers/gpu/drm/radeon/rs780_dpm.c printk("\t\tpower level 1 sclk: %u vddc_index: %d\n", printk 2015 drivers/gpu/drm/radeon/rv6xx_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 2017 drivers/gpu/drm/radeon/rv6xx_dpm.c printk("\t\tpower level 0 sclk: %u mclk: %u vddc: %u\n", printk 2020 drivers/gpu/drm/radeon/rv6xx_dpm.c printk("\t\tpower level 1 sclk: %u mclk: %u vddc: %u\n", printk 2023 drivers/gpu/drm/radeon/rv6xx_dpm.c printk("\t\tpower level 2 sclk: %u mclk: %u vddc: %u\n", printk 2440 drivers/gpu/drm/radeon/rv770_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 2443 drivers/gpu/drm/radeon/rv770_dpm.c printk("\t\tpower level 0 sclk: %u mclk: %u vddc: %u vddci: %u\n", printk 2446 drivers/gpu/drm/radeon/rv770_dpm.c printk("\t\tpower level 1 sclk: %u mclk: %u vddc: %u vddci: %u\n", printk 2449 drivers/gpu/drm/radeon/rv770_dpm.c printk("\t\tpower level 2 sclk: %u mclk: %u vddc: %u vddci: %u\n", printk 2453 drivers/gpu/drm/radeon/rv770_dpm.c printk("\t\tpower level 0 sclk: %u mclk: %u vddc: %u\n", printk 2456 drivers/gpu/drm/radeon/rv770_dpm.c printk("\t\tpower level 1 sclk: %u mclk: %u vddc: %u\n", printk 2459 drivers/gpu/drm/radeon/rv770_dpm.c printk("\t\tpower level 2 sclk: %u mclk: %u vddc: %u\n", printk 4784 drivers/gpu/drm/radeon/si.c printk("\t0x%08x <---\n", ib->ptr[i]); printk 4786 drivers/gpu/drm/radeon/si.c printk("\t0x%08x\n", ib->ptr[i]); printk 5070 drivers/gpu/drm/radeon/si.c printk("VM fault (0x%02x, vmid %d) at page %u, %s from %s (%d)\n", printk 1802 drivers/gpu/drm/radeon/sumo_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 1805 drivers/gpu/drm/radeon/sumo_dpm.c printk("\t\tpower level %d sclk: %u vddc: %u\n", printk 2020 drivers/gpu/drm/radeon/trinity_dpm.c printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk); printk 2023 drivers/gpu/drm/radeon/trinity_dpm.c printk("\t\tpower level %d sclk: %u vddc: %u\n", printk 200 drivers/hid/hidraw.c printk(KERN_WARNING "hidraw: pid %d passed too large report\n", printk 207 drivers/hid/hidraw.c printk(KERN_WARNING "hidraw: pid %d passed too short report\n", printk 601 drivers/hid/hidraw.c printk(KERN_INFO "hidraw: raw HID events driver (C) Jiri Kosina\n"); printk 247 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING printk 257 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING "%s: SDA stuck high!\n", name); printk 261 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING printk 271 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING "%s: SDA stuck low!\n", name); printk 275 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING printk 285 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING "%s: SCL stuck high!\n", name); printk 289 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING printk 299 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING "%s: SCL stuck low!\n", name); printk 303 drivers/i2c/algos/i2c-algo-bit.c printk(KERN_WARNING printk 18 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_DEBUG fmt, ## args); } while (0) printk 20 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_DEBUG fmt, ## args); } while (0) printk 22 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_DEBUG fmt, ## args); } while (0) printk 201 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_INFO " [%02d] RD %d bytes from %#02x [%#02x, ...]\n", printk 204 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_INFO " [%02d] WR %d bytes to %#02x [%#02x%s", printk 208 drivers/i2c/algos/i2c-algo-pca.c printk("%#04x%s", msg->buf[i], i == msg->len - 1 ? "" : ", "); printk 209 drivers/i2c/algos/i2c-algo-pca.c printk("]\n"); printk 367 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name); printk 370 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name); printk 413 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_WARNING printk 419 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_WARNING "%s: " printk 428 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_INFO "%s: Clock frequency is %dkHz\n", printk 448 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_WARNING "%s: I2C clock speed too high." printk 454 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_WARNING "%s: I2C clock speed too low." printk 500 drivers/i2c/algos/i2c-algo-pca.c printk(KERN_INFO printk 49 drivers/i2c/algos/i2c-algo-pcf.c DEBPROTO(printk(KERN_DEBUG "S ")); printk 55 drivers/i2c/algos/i2c-algo-pcf.c DEBPROTO(printk(" Sr ")); printk 61 drivers/i2c/algos/i2c-algo-pcf.c DEBPROTO(printk("P\n")); printk 67 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_INFO printk 90 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_INFO printk 109 drivers/i2c/algos/i2c-algo-pcf.c printk(KERN_ERR "Timeout waiting for Bus Busy\n"); printk 153 drivers/i2c/algos/i2c-algo-pcf.c DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n", printk 163 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp)); printk 171 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp)); printk 179 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S2 (0x%02x).\n", temp)); printk 187 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp)); printk 196 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp)); printk 200 drivers/i2c/algos/i2c-algo-pcf.c printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n"); printk 309 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: " printk 318 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n", printk 337 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting " printk 346 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");) printk 351 drivers/i2c/algos/i2c-algo-pcf.c DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: Msg %d, addr=0x%x, flags=0x%x, len=%d\n", printk 359 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: " printk 362 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret)); printk 369 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: " printk 372 drivers/i2c/algos/i2c-algo-pcf.c DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: wrote %d bytes.\n",ret)); printk 161 drivers/i2c/busses/i2c-amd756-s4882.c printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n"); printk 197 drivers/i2c/busses/i2c-amd756-s4882.c printk(KERN_ERR "i2c-amd756-s4882: " printk 236 drivers/i2c/busses/i2c-amd756-s4882.c printk(KERN_ERR "i2c-amd756-s4882: " printk 138 drivers/i2c/busses/i2c-elektor.c printk(KERN_ERR "%s: requested I/O region (%#x:2) is " printk 144 drivers/i2c/busses/i2c-elektor.c printk(KERN_ERR "%s: remap of I/O region %#x failed\n", printk 151 drivers/i2c/busses/i2c-elektor.c printk(KERN_ERR "%s: requested memory region (%#x:2) " printk 157 drivers/i2c/busses/i2c-elektor.c printk(KERN_ERR "%s: remap of memory region %#x " printk 169 drivers/i2c/busses/i2c-elektor.c printk(KERN_ERR "%s: Request irq%d failed\n", printk 509 drivers/i2c/busses/i2c-gpio.c printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret); printk 70 drivers/i2c/busses/i2c-ibm_iic.c # define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x) printk 83 drivers/i2c/busses/i2c-ibm_iic.c printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); printk 84 drivers/i2c/busses/i2c-ibm_iic.c printk(KERN_DEBUG printk 641 drivers/i2c/busses/i2c-ibm_iic.c printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq," printk 650 drivers/i2c/busses/i2c-ibm_iic.c printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n", printk 341 drivers/i2c/busses/i2c-mpc.c printk(KERN_ERR printk 156 drivers/i2c/busses/i2c-nforce2-s4985.c printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n"); printk 192 drivers/i2c/busses/i2c-nforce2-s4985.c printk(KERN_ERR "i2c-nforce2-s4985: " printk 231 drivers/i2c/busses/i2c-nforce2-s4985.c printk(KERN_ERR "i2c-nforce2-s4985: " printk 190 drivers/i2c/busses/i2c-parport-light.c printk(KERN_ERR DRVNAME ": Device allocation failed\n"); printk 196 drivers/i2c/busses/i2c-parport-light.c printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", printk 214 drivers/i2c/busses/i2c-parport-light.c printk(KERN_ERR DRVNAME ": adapter type unspecified\n"); printk 219 drivers/i2c/busses/i2c-parport-light.c printk(KERN_ERR DRVNAME ": invalid type (%d)\n", type); printk 41 drivers/i2c/busses/i2c-pca-isa.c printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg], printk 53 drivers/i2c/busses/i2c-pca-isa.c printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res); printk 86 drivers/i2c/busses/i2c-pca-isa.c printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n"); printk 325 drivers/i2c/busses/i2c-pmcmsp.c printk(KERN_INFO DRV_NAME ": Registering MSP71xx I2C adapter\n"); printk 431 drivers/i2c/busses/i2c-powermac.c printk(KERN_ERR "i2c-powermac: Adapter %s registration " printk 437 drivers/i2c/busses/i2c-powermac.c printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name); printk 87 drivers/i2c/busses/i2c-puv3.c printk(KERN_WARNING "Error i2c reg\n"); printk 238 drivers/i2c/busses/i2c-pxa.c printk("%s %08x: ", prefix, val); printk 242 drivers/i2c/busses/i2c-pxa.c printk("%s ", str); printk 264 drivers/i2c/busses/i2c-pxa.c printk("\n"); printk 289 drivers/i2c/busses/i2c-pxa.c printk("\n"); printk 115 drivers/i2c/busses/i2c-viapro.c printk("%02x,", inb_p(SMBBLKDAT)); printk 116 drivers/i2c/busses/i2c-viapro.c printk("\n"); printk 119 drivers/i2c/busses/i2c-viapro.c printk("%02x,", inb_p(SMBBLKDAT)); printk 120 drivers/i2c/busses/i2c-viapro.c printk("%02x\n", inb_p(SMBBLKDAT)); printk 354 drivers/i2c/busses/scx200_acb.c printk(" data:"); printk 356 drivers/i2c/busses/scx200_acb.c printk(" %02x", buffer[i]); printk 358 drivers/i2c/busses/scx200_acb.c printk("\n"); printk 71 drivers/i2c/i2c-dev.c printk(KERN_ERR "i2c-dev: Out of device minors (%d)\n", printk 724 drivers/i2c/i2c-dev.c printk(KERN_INFO "i2c /dev entries driver\n"); printk 752 drivers/i2c/i2c-dev.c printk(KERN_ERR "%s: Driver Initialisation failed\n", __FILE__); printk 278 drivers/ide/aec62xx.c printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected" printk 132 drivers/ide/ali14xx.c printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n", printk 213 drivers/ide/ali14xx.c printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", printk 218 drivers/ide/ali14xx.c printk(KERN_ERR "ali14xx: Chip initialization failed.\n"); printk 241 drivers/ide/ali14xx.c printk(KERN_ERR "ali14xx: not found.\n"); printk 486 drivers/ide/alim15x3.c printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", printk 130 drivers/ide/amd74xx.c printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set " printk 263 drivers/ide/amd74xx.c printk(KERN_INFO "%s %s: UDMA%s controller\n", printk 278 drivers/ide/amd74xx.c printk(KERN_WARNING "%s: User given PCI clock speed impossible" printk 65 drivers/ide/au1xxx-ide.c printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); printk 83 drivers/ide/au1xxx-ide.c printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); printk 240 drivers/ide/au1xxx-ide.c printk(KERN_WARNING "%s: DMA table too small\n", printk 254 drivers/ide/au1xxx-ide.c printk(KERN_ERR "%s failed %d\n", printk 260 drivers/ide/au1xxx-ide.c printk(KERN_ERR "%s failed %d\n", printk 303 drivers/ide/au1xxx-ide.c printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n", printk 564 drivers/ide/au1xxx-ide.c printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); printk 208 drivers/ide/buddha.c printk(KERN_INFO "ide: %s IDE controller\n", printk 280 drivers/ide/cmd640.c printk("ide: cmd640 on PCI disabled by BIOS\n"); printk 370 drivers/ide/cmd640.c printk("ide: cmd640 internal register dump:"); printk 373 drivers/ide/cmd640.c printk("\n%04x:", reg); printk 374 drivers/ide/cmd640.c printk(" %02x", get_cmd640_reg(reg)); printk 376 drivers/ide/cmd640.c printk("\n"); printk 443 drivers/ide/cmd640.c printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count); printk 590 drivers/ide/cmd640.c printk("%s: %sabled cmd640 fast host timing (devsel)\n", printk 596 drivers/ide/cmd640.c printk("%s: %sabled cmd640 prefetch\n", printk 604 drivers/ide/cmd640.c printk("%s: selected cmd640 PIO mode%d (%dns)", printk 625 drivers/ide/cmd640.c printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i); printk 631 drivers/ide/cmd640.c printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n", printk 702 drivers/ide/cmd640.c printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", printk 708 drivers/ide/cmd640.c printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", printk 745 drivers/ide/cmd640.c printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n"); printk 760 drivers/ide/cmd640.c printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version); printk 783 drivers/ide/cmd640.c printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" printk 832 drivers/ide/cmd640.c printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", printk 86 drivers/ide/cs5520.c printk(KERN_ERR "cs55x0: bad ide timing.\n"); printk 122 drivers/ide/cs5520.c printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); printk 127 drivers/ide/cs5520.c printk(KERN_WARNING "%s: No suitable DMA available.\n", printk 157 drivers/ide/cs5530.c printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); printk 161 drivers/ide/cs5530.c printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); printk 260 drivers/ide/cs5536.c printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n"); printk 265 drivers/ide/cs5536.c printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); printk 97 drivers/ide/cy82c693.c printk(KERN_ERR "%s: tune_drive: " printk 83 drivers/ide/delkin_cb.c printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc); printk 88 drivers/ide/delkin_cb.c printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc); printk 145 drivers/ide/dtc2278.c printk(KERN_ERR "dtc2278: ide interfaces already in use!\n"); printk 49 drivers/ide/falconide.c printk(KERN_ERR "%s: bug\n", __func__); printk 146 drivers/ide/falconide.c printk(KERN_INFO "ide: Falcon IDE controller\n"); printk 149 drivers/ide/falconide.c printk(KERN_ERR "%s: resources busy\n", DRV_NAME); printk 696 drivers/ide/hpt366.c printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n", printk 720 drivers/ide/hpt366.c printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff); printk 982 drivers/ide/hpt366.c printk(KERN_WARNING "%s %s: no clock data saved by " printk 1008 drivers/ide/hpt366.c printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, " printk 1076 drivers/ide/hpt366.c printk(KERN_ERR "%s %s: unknown bus timing!\n", printk 1103 drivers/ide/hpt366.c printk(KERN_ERR "%s %s: DPLL did not stabilize!\n", printk 1108 drivers/ide/hpt366.c printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n", printk 1114 drivers/ide/hpt366.c printk(KERN_INFO "%s %s: using %d MHz PCI clock\n", printk 1254 drivers/ide/hpt366.c printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", printk 1270 drivers/ide/hpt366.c printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt " printk 1306 drivers/ide/hpt366.c printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, " printk 1447 drivers/ide/hpt366.c printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name); printk 1462 drivers/ide/hpt366.c printk(KERN_ERR "%s %s: out of memory!\n", printk 150 drivers/ide/ht6560b.c printk("ht6560b: %s: select=%#x timing=%#x\n", printk 190 drivers/ide/ht6560b.c printk("ht6560b " HT6560B_VERSION printk 233 drivers/ide/ht6560b.c printk("ht6560b: drive %s setting pio=%d recovery=%d (%dns) active=%d (%dns)\n", drive->name, pio, recovery_cycles, recovery_time, active_cycles, active_time); printk 240 drivers/ide/ht6560b.c printk("ht6560b: drive %s setting pio=0\n", drive->name); printk 278 drivers/ide/ht6560b.c printk("ht6560b: drive %s prefetch mode %sabled\n", drive->name, (state ? "en" : "dis")); printk 305 drivers/ide/ht6560b.c printk("ht6560b: drive %s tuned to pio mode %#x timing=%#x\n", drive->name, pio, timing); printk 362 drivers/ide/ht6560b.c printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n", printk 368 drivers/ide/ht6560b.c printk(KERN_NOTICE "%s: HBA not found\n", __func__); printk 275 drivers/ide/icside.c printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", printk 41 drivers/ide/ide-4drives.c printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", printk 47 drivers/ide/ide-4drives.c printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", printk 50 drivers/ide/ide-acpi.c printk(KERN_DEBUG "%s: " fmt, __func__, ## args) printk 71 drivers/ide/ide-acpi.c printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident); printk 253 drivers/ide/ide-acpi.c printk(KERN_DEBUG printk 279 drivers/ide/ide-acpi.c printk(KERN_ERR printk 341 drivers/ide/ide-acpi.c printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", printk 439 drivers/ide/ide-acpi.c printk(KERN_ERR printk 21 drivers/ide/ide-atapi.c printk(KERN_INFO "ide: " fmt, ## args) printk 59 drivers/ide/ide-atapi.c printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", printk 63 drivers/ide/ide-atapi.c printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", printk 66 drivers/ide/ide-atapi.c printk(KERN_ERR "%s: %s: the removable flag is not set\n", printk 69 drivers/ide/ide-atapi.c printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " printk 72 drivers/ide/ide-atapi.c printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " printk 216 drivers/ide/ide-atapi.c printk(KERN_WARNING PFX "%s: failed to map sense " printk 247 drivers/ide/ide-atapi.c printk(KERN_WARNING PFX "%s: error queuing a sense request\n", printk 320 drivers/ide/ide-atapi.c printk(KERN_INFO PFX "cmd 0x%x timed out\n", printk 380 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n", printk 396 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name, printk 400 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n", printk 445 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: DMA %s error\n", printk 478 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: I/O error in request " printk 527 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: The device wants to issue more " printk 585 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing " printk 590 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing" printk 622 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: Strange, packet command initiated yet " printk 664 drivers/ide/ide-atapi.c printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while " printk 324 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: tray open\n", printk 629 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name, printk 674 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: %s: data underrun " printk 738 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: confused, missing data\n", printk 1077 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: No cdrom TOC buffer!\n", printk 1328 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: ATAPI magneto-optical drive\n", printk 1386 drivers/ide/ide-cd.c printk(KERN_INFO PFX "%s: ATAPI", drive->name); printk 1390 drivers/ide/ide-cd.c printk(KERN_CONT " %dX", cd->max_speed); printk 1392 drivers/ide/ide-cd.c printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM"); printk 1395 drivers/ide/ide-cd.c printk(KERN_CONT " DVD%s%s", printk 1400 drivers/ide/ide-cd.c printk(KERN_CONT " CD%s%s", printk 1405 drivers/ide/ide-cd.c printk(KERN_CONT " changer w/%d slots", nslots); printk 1407 drivers/ide/ide-cd.c printk(KERN_CONT " drive"); printk 1409 drivers/ide/ide-cd.c printk(KERN_CONT ", %dkB Cache\n", printk 1547 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: %s failed to register device with the" printk 1764 drivers/ide/ide-cd.c printk(KERN_ERR PFX "%s: Can't allocate a cdrom structure\n", printk 1819 drivers/ide/ide-cd.c printk(KERN_INFO DRV_NAME " driver " IDECD_VERSION "\n"); printk 162 drivers/ide/ide-cd_ioctl.c printk(KERN_ERR "%s: door locking not supported\n", printk 28 drivers/ide/ide-cd_verbose.c printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x " printk 261 drivers/ide/ide-cd_verbose.c printk(KERN_ERR "ATAPI device %s:\n", name); printk 263 drivers/ide/ide-cd_verbose.c printk(KERN_CONT " Error: "); printk 265 drivers/ide/ide-cd_verbose.c printk(" Deferred Error: "); printk 267 drivers/ide/ide-cd_verbose.c printk(KERN_CONT " Vendor-specific Error: "); printk 269 drivers/ide/ide-cd_verbose.c printk(KERN_CONT " Unknown Error Type: "); printk 274 drivers/ide/ide-cd_verbose.c printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key); printk 309 drivers/ide/ide-cd_verbose.c printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n", printk 330 drivers/ide/ide-cd_verbose.c printk(KERN_ERR " The failed \"%s\" packet command " printk 333 drivers/ide/ide-cd_verbose.c printk(KERN_CONT "%02x ", scsi_req(failed_command)->cmd[i]); printk 334 drivers/ide/ide-cd_verbose.c printk(KERN_CONT "\"\n"); printk 345 drivers/ide/ide-cd_verbose.c printk(KERN_ERR " Command is %02d%% complete\n", printk 351 drivers/ide/ide-cd_verbose.c printk(KERN_ERR " Error in %s byte %d", printk 357 drivers/ide/ide-cd_verbose.c printk(KERN_CONT " bit %d", sense->sks[0] & 0x07); printk 359 drivers/ide/ide-cd_verbose.c printk(KERN_CONT "\n"); printk 124 drivers/ide/ide-cs.c printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", printk 130 drivers/ide/ide-cs.c printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", printk 339 drivers/ide/ide-disk.c printk(KERN_INFO "%s: Host Protected Area detected.\n" printk 351 drivers/ide/ide-disk.c printk(KERN_INFO "%s: Host Protected Area disabled.\n", printk 390 drivers/ide/ide-disk.c printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " printk 400 drivers/ide/ide-disk.c printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode" printk 545 drivers/ide/ide-disk.c printk(KERN_INFO "%s: cache flushes %ssupported\n", printk 685 drivers/ide/ide-disk.c printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, printk 725 drivers/ide/ide-disk.c printk(KERN_INFO "%s: %llu sectors (%llu MB)", printk 730 drivers/ide/ide-disk.c printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2); printk 732 drivers/ide/ide-disk.c printk(KERN_CONT ", CHS=%d/%d/%d\n", printk 743 drivers/ide/ide-disk.c printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n", printk 757 drivers/ide/ide-disk.c printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); printk 167 drivers/ide/ide-dma-sff.c printk(KERN_ERR "%s: %s\n", drive->name, printk 243 drivers/ide/ide-dma-sff.c printk(KERN_WARNING "%s: %s: DMA status (0x%02x)\n", printk 111 drivers/ide/ide-dma.c printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n", printk 198 drivers/ide/ide-dma.c printk(KERN_INFO "%s: DMA disabled\n", drive->name); printk 223 drivers/ide/ide-dma.c printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n", printk 345 drivers/ide/ide-dma.c printk(KERN_INFO "%s: %s mode selected\n", drive->name, printk 437 drivers/ide/ide-dma.c printk(KERN_ERR "%s: DMA interrupt recovery\n", drive->name); printk 458 drivers/ide/ide-dma.c printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); printk 465 drivers/ide/ide-dma.c printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); printk 468 drivers/ide/ide-dma.c printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); printk 522 drivers/ide/ide-dma.c printk(KERN_ERR "%s: unable to allocate PRD table\n", printk 179 drivers/ide/ide-eh.c printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name); printk 188 drivers/ide/ide-eh.c printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n", printk 208 drivers/ide/ide-eh.c printk(KERN_ERR "%s: reset: master: ", hwif->name); printk 210 drivers/ide/ide-eh.c printk(KERN_CONT "%s", err_master_vals[err_master]); printk 212 drivers/ide/ide-eh.c printk(KERN_CONT "error (0x%02x?)", err); printk 214 drivers/ide/ide-eh.c printk(KERN_CONT "; slave: failed"); printk 215 drivers/ide/ide-eh.c printk(KERN_CONT "\n"); printk 234 drivers/ide/ide-eh.c printk(KERN_ERR "%s: host reset_poll failure for %s.\n", printk 248 drivers/ide/ide-eh.c printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n", printk 256 drivers/ide/ide-eh.c printk(KERN_INFO "%s: reset: success\n", hwif->name); printk 97 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "Error in REQUEST SENSE itself - " printk 116 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, " printk 185 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "unsupported page code in %s\n", __func__); printk 248 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "%s: I/O error\n", drive->name); printk 262 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", printk 328 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "Can't get flexible disk page params\n"); printk 351 drivers/ide/ide-floppy.c printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, " printk 363 drivers/ide/ide-floppy.c printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d " printk 397 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "Can't get floppy parameters\n"); printk 434 drivers/ide/ide-floppy.c printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d " printk 441 drivers/ide/ide-floppy.c printk(KERN_NOTICE PFX "%s: %d bytes block size" printk 448 drivers/ide/ide-floppy.c printk(KERN_NOTICE PFX "%s: Warning: " printk 462 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "%s: No disk in drive\n", printk 466 drivers/ide/ide-floppy.c printk(KERN_ERR PFX "%s: Invalid capacity for disk " printk 55 drivers/ide/ide-floppy_ioctl.c printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); printk 142 drivers/ide/ide-gd.c printk(KERN_INFO "Shutdown: %s\n", drive->name); printk 377 drivers/ide/ide-gd.c printk(KERN_ERR PFX "%s: not supported by this driver\n", printk 384 drivers/ide/ide-gd.c printk(KERN_ERR PFX "%s: can't allocate a disk structure\n", printk 435 drivers/ide/ide-gd.c printk(KERN_INFO DRV_NAME " driver " IDE_GD_VERSION "\n"); printk 86 drivers/ide/ide-generic.c printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" " printk 95 drivers/ide/ide-generic.c printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports " printk 103 drivers/ide/ide-generic.c printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " printk 111 drivers/ide/ide-generic.c printk(KERN_ERR "%s: I/O resource 0x%lX " printk 108 drivers/ide/ide-io.c printk(KERN_ERR "%s: head unload failed!\n", printk 200 drivers/ide/ide-io.c printk(KERN_DEBUG "%s: %s: 0x%02x\n", drive->name, __func__, printk 282 drivers/ide/ide-io.c printk("%s: DRIVE_CMD (null)\n", drive->name); printk 321 drivers/ide/ide-io.c printk("%s: start_request: current=0x%08lx\n", printk 340 drivers/ide/ide-io.c printk(KERN_ERR "%s: drive not ready for command\n", drive->name); printk 359 drivers/ide/ide-io.c printk("%s: start_power_step(step: %d)\n", printk 676 drivers/ide/ide-io.c printk(KERN_WARNING "%s: lost interrupt\n", printk 744 drivers/ide/ide-io.c printk(KERN_ERR "%s: unexpected interrupt, " printk 244 drivers/ide/ide-iops.c printk(KERN_DEBUG "%s: skipping word 93 validity check\n", printk 282 drivers/ide/ide-iops.c printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, " printk 343 drivers/ide/ide-iops.c printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__); printk 24 drivers/ide/ide-legacy.c printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", printk 30 drivers/ide/ide-legacy.c printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", printk 43 drivers/ide/ide-lib.c printk(KERN_CONT ", LBAsect=%llu", printk 46 drivers/ide/ide-lib.c printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, printk 52 drivers/ide/ide-lib.c printk(KERN_CONT "{ "); printk 54 drivers/ide/ide-lib.c printk(KERN_CONT "DriveStatusError "); printk 56 drivers/ide/ide-lib.c printk(KERN_CONT "%s", printk 59 drivers/ide/ide-lib.c printk(KERN_CONT "UncorrectableError "); printk 61 drivers/ide/ide-lib.c printk(KERN_CONT "SectorIdNotFound "); printk 63 drivers/ide/ide-lib.c printk(KERN_CONT "TrackZeroNotFound "); printk 65 drivers/ide/ide-lib.c printk(KERN_CONT "AddrMarkNotFound "); printk 66 drivers/ide/ide-lib.c printk(KERN_CONT "}"); printk 74 drivers/ide/ide-lib.c printk(KERN_CONT ", sector=%llu", printk 77 drivers/ide/ide-lib.c printk(KERN_CONT "\n"); printk 82 drivers/ide/ide-lib.c printk(KERN_CONT "{ "); printk 84 drivers/ide/ide-lib.c printk(KERN_CONT "IllegalLengthIndication "); printk 86 drivers/ide/ide-lib.c printk(KERN_CONT "EndOfMedia "); printk 88 drivers/ide/ide-lib.c printk(KERN_CONT "AbortedCommand "); printk 90 drivers/ide/ide-lib.c printk(KERN_CONT "MediaChangeRequested "); printk 92 drivers/ide/ide-lib.c printk(KERN_CONT "LastFailedSense=0x%02x ", printk 94 drivers/ide/ide-lib.c printk(KERN_CONT "}\n"); printk 112 drivers/ide/ide-lib.c printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat); printk 114 drivers/ide/ide-lib.c printk(KERN_CONT "Busy "); printk 117 drivers/ide/ide-lib.c printk(KERN_CONT "DriveReady "); printk 119 drivers/ide/ide-lib.c printk(KERN_CONT "DeviceFault "); printk 121 drivers/ide/ide-lib.c printk(KERN_CONT "SeekComplete "); printk 123 drivers/ide/ide-lib.c printk(KERN_CONT "DataRequest "); printk 125 drivers/ide/ide-lib.c printk(KERN_CONT "CorrectedError "); printk 127 drivers/ide/ide-lib.c printk(KERN_CONT "Sense "); printk 129 drivers/ide/ide-lib.c printk(KERN_CONT "Error "); printk 131 drivers/ide/ide-lib.c printk(KERN_CONT "}\n"); printk 134 drivers/ide/ide-lib.c printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err); printk 141 drivers/ide/ide-lib.c printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", printk 142 drivers/ide/ide-pci-generic.c printk(KERN_INFO "%s %s: skipping disabled " printk 104 drivers/ide/ide-pm.c printk(KERN_INFO "%s: complete_power_step(step: %d)\n", printk 210 drivers/ide/ide-pm.c printk("%s: completing PM request, %s\n", drive->name, printk 248 drivers/ide/ide-pm.c printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); printk 252 drivers/ide/ide-pm.c printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); printk 257 drivers/ide/ide-pm.c printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); printk 35 drivers/ide/ide-pnp.c printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n"); printk 44 drivers/ide/ide-pnp.c printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", printk 50 drivers/ide/ide-pnp.c printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", printk 120 drivers/ide/ide-probe.c printk(KERN_INFO "%s: %s, %s DISK drive\n", drive->name, m, printk 130 drivers/ide/ide-probe.c printk(KERN_INFO "%s: %s, ATAPI ", drive->name, m); printk 137 drivers/ide/ide-probe.c printk(KERN_CONT "cdrom or floppy?, assuming "); printk 139 drivers/ide/ide-probe.c printk(KERN_CONT "FLOPPY"); printk 152 drivers/ide/ide-probe.c printk(KERN_CONT "FLOPPY"); printk 157 drivers/ide/ide-probe.c printk(KERN_CONT "CD/DVD-ROM"); printk 160 drivers/ide/ide-probe.c printk(KERN_CONT "TAPE"); printk 163 drivers/ide/ide-probe.c printk(KERN_CONT "OPTICAL"); printk 167 drivers/ide/ide-probe.c printk(KERN_CONT "UNKNOWN (type %d)", type); printk 171 drivers/ide/ide-probe.c printk(KERN_CONT " drive\n"); printk 208 drivers/ide/ide-probe.c printk(KERN_INFO "%s: dumping identify data\n", drive->name); printk 280 drivers/ide/ide-probe.c printk(KERN_INFO "%s: probing with STATUS(0x%02x) " printk 347 drivers/ide/ide-probe.c printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); printk 395 drivers/ide/ide-probe.c printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n", printk 433 drivers/ide/ide-probe.c printk(KERN_ERR "%s: no response (status = 0x%02x), " printk 447 drivers/ide/ide-probe.c printk(KERN_ERR "%s: no response (status = 0x%02x)\n", printk 503 drivers/ide/ide-probe.c printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n", printk 507 drivers/ide/ide-probe.c printk(KERN_INFO "%s: ATAPI cdrom (?)\n", drive->name); printk 510 drivers/ide/ide-probe.c printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name); printk 558 drivers/ide/ide-probe.c printk(KERN_WARNING "IDE: %s: device_register error: %d\n", printk 605 drivers/ide/ide-probe.c printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name); printk 631 drivers/ide/ide-probe.c printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n", printk 673 drivers/ide/ide-probe.c printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n"); printk 701 drivers/ide/ide-probe.c printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); printk 840 drivers/ide/ide-probe.c printk(KERN_ERR "ide: failed to init %s\n", printk 889 drivers/ide/ide-probe.c printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, printk 893 drivers/ide/ide-probe.c printk(KERN_INFO "%s at 0x%08lx on irq %d", hwif->name, printk 897 drivers/ide/ide-probe.c printk(KERN_CONT " (serialized)"); printk 898 drivers/ide/ide-probe.c printk(KERN_CONT "\n"); printk 998 drivers/ide/ide-probe.c printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name); printk 1012 drivers/ide/ide-probe.c printk(KERN_ERR "%s: unable to allocate SG table.\n", hwif->name); printk 1019 drivers/ide/ide-probe.c printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n", printk 1050 drivers/ide/ide-probe.c printk(KERN_WARNING "IDE: %s: device_register error: " printk 1116 drivers/ide/ide-probe.c printk(KERN_INFO "%s: DMA disabled\n", hwif->name); printk 1377 drivers/ide/ide-probe.c printk(KERN_ERR "%s: no free slot for interface\n", printk 1423 drivers/ide/ide-probe.c printk(KERN_INFO "%s: disabling port\n", hwif->name); printk 1496 drivers/ide/ide-probe.c printk(KERN_INFO "%s: failed to initialize IDE " printk 380 drivers/ide/ide-proc.c printk("%s(): parse error\n", __func__); printk 613 drivers/ide/ide-proc.c printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n", printk 109 drivers/ide/ide-scan-pci.c printk(KERN_ERR "%s: failed to register %s driver\n", printk 347 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: Error in REQUEST SENSE " printk 464 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: I/O error, " printk 528 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: I/O error, ", printk 612 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: DSC timeout\n", printk 748 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: Block location is unknown" printk 835 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: %s: position_tape failed in" printk 926 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" printk 959 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: valid should be 0 now\n"); printk 1108 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n", printk 1235 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: Couldn't write a filemark\n"); printk 1359 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n", printk 1447 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); printk 1449 drivers/ide/ide-tape.c printk(KERN_WARNING "ide-tape: Cannot deal with zero " printk 1503 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name); printk 1612 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", printk 1624 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n", printk 1641 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" printk 1661 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: %s: invalid tape speed " printk 1666 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: %s: invalid max_speed " printk 1758 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n", printk 1779 drivers/ide/ide-tape.c printk(KERN_NOTICE "ide-tape: decreasing stage size\n"); printk 1795 drivers/ide/ide-tape.c printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " printk 1956 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: not supported by this version of" printk 1962 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n", printk 2028 drivers/ide/ide-tape.c printk(KERN_ERR "Unable to create sysfs class for ide tapes\n"); printk 2034 drivers/ide/ide-tape.c printk(KERN_ERR "ide-tape: Failed to register chrdev" printk 49 drivers/ide/ide-taskfile.c printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " printk 54 drivers/ide/ide-taskfile.c printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n", printk 75 drivers/ide/ide-xfer-mode.c printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); printk 101 drivers/ide/ide-xfer-mode.c printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", printk 204 drivers/ide/ide-xfer-mode.c printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", printk 286 drivers/ide/ide.c printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); printk 290 drivers/ide/ide.c printk(KERN_INFO "ide: disabling flush requests for %s\n", printk 295 drivers/ide/ide.c printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", printk 300 drivers/ide/ide.c printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); printk 304 drivers/ide/ide.c printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n", printk 309 drivers/ide/ide.c printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); printk 320 drivers/ide/ide.c printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", printk 361 drivers/ide/ide.c printk(KERN_INFO "ide: ignoring cable detection for %s\n", printk 377 drivers/ide/ide.c printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); printk 381 drivers/ide/ide.c printk(KERN_WARNING "IDE: bus_register error: %d\n", ret); printk 473 drivers/ide/it821x.c printk(KERN_INFO "%s: IT8212 %sRAID %d volume", printk 477 drivers/ide/it821x.c printk(KERN_CONT "(%dK stripe)", id[146]); printk 478 drivers/ide/it821x.c printk(KERN_CONT ".\n"); printk 494 drivers/ide/it821x.c printk(KERN_INFO "%s: Performing identify fixups.\n", printk 568 drivers/ide/it821x.c printk(KERN_WARNING DRV_NAME " %s: revision 0x10, " printk 615 drivers/ide/it821x.c printk(KERN_INFO DRV_NAME " %s: forcing bypass mode\n", printk 620 drivers/ide/it821x.c printk(KERN_INFO DRV_NAME " %s: controller in %s mode\n", printk 657 drivers/ide/it821x.c printk(KERN_ERR DRV_NAME " %s: out of memory\n", pci_name(dev)); printk 131 drivers/ide/macide.c printk(KERN_INFO "ide: Macintosh %s IDE controller\n", printk 108 drivers/ide/opti621.c printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); printk 274 drivers/ide/palm_bk3710.c printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); printk 323 drivers/ide/palm_bk3710.c printk(KERN_ERR "failed to get memory region resource\n"); printk 329 drivers/ide/palm_bk3710.c printk(KERN_ERR "failed to get IRQ resource\n"); printk 335 drivers/ide/palm_bk3710.c printk(KERN_ERR "failed to request memory region\n"); printk 341 drivers/ide/palm_bk3710.c printk(KERN_ERR "failed to map IO memory\n"); printk 368 drivers/ide/palm_bk3710.c printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); printk 34 drivers/ide/pdc202xx_new.c #define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args) printk 192 drivers/ide/pdc202xx_new.c printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", printk 333 drivers/ide/pdc202xx_new.c printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n", printk 338 drivers/ide/pdc202xx_new.c printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!" printk 375 drivers/ide/pdc202xx_new.c printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n", printk 386 drivers/ide/pdc202xx_new.c printk(KERN_ERR "%s %s: F[%d] invalid!\n", printk 433 drivers/ide/pdc202xx_new.c printk(KERN_INFO DRV_NAME " %s: PCI config space " printk 504 drivers/ide/pdc202xx_new.c printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller," printk 197 drivers/ide/pdc202xx_old.c printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \ printk 205 drivers/ide/pdc202xx_old.c printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ", printk 209 drivers/ide/pdc202xx_old.c printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); printk 225 drivers/ide/pdc202xx_old.c printk(KERN_INFO "%s %s: PCI config space interrupt " printk 318 drivers/ide/pdc202xx_old.c printk(KERN_INFO DRV_NAME " %s: skipping Promise " printk 414 drivers/ide/piix.c printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n"); printk 416 drivers/ide/piix.c printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n"); printk 563 drivers/ide/pmac.c printk(KERN_ERR "%s: Set PIO timing for mode %d, reg: 0x%08x\n", printk 592 drivers/ide/pmac.c printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n", printk 694 drivers/ide/pmac.c printk(KERN_ERR "%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n", printk 768 drivers/ide/pmac.c printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n", printk 1099 drivers/ide/pmac.c printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " printk 1144 drivers/ide/pmac.c printk(KERN_WARNING "ide-pmac: no address for %pOF\n", printk 1152 drivers/ide/pmac.c printk(KERN_ERR "ide-pmac: can't request MMIO resource for " printk 1164 drivers/ide/pmac.c printk(KERN_WARNING "ide-pmac: no intrs for device %pOF, using " printk 1181 drivers/ide/pmac.c printk(KERN_WARNING "ide-pmac: can't request DMA " printk 1263 drivers/ide/pmac.c printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n"); printk 1272 drivers/ide/pmac.c printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " printk 1280 drivers/ide/pmac.c printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for " printk 1482 drivers/ide/pmac.c printk(KERN_WARNING "%s: DMA on non aligned address, " printk 1492 drivers/ide/pmac.c printk(KERN_WARNING "%s: DMA table too small\n", printk 1521 drivers/ide/pmac.c printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name); printk 1637 drivers/ide/pmac.c printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n", printk 1657 drivers/ide/pmac.c printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); printk 1692 drivers/ide/pmac.c printk(KERN_ERR "%s: unable to allocate DMA command list\n", printk 141 drivers/ide/q40ide.c printk(KERN_INFO "ide: Q40 IDE controller\n"); printk 147 drivers/ide/q40ide.c printk("could not reserve ports %lx-%lx for %s\n", printk 152 drivers/ide/q40ide.c printk("could not reserve port %lx for %s\n", printk 166 drivers/ide/qd65xx.c printk(KERN_DEBUG "%s: listed !\n", drive->name); printk 189 drivers/ide/qd65xx.c printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); printk 202 drivers/ide/qd65xx.c printk(KERN_INFO "%s: PIO mode%d\n", drive->name, printk 231 drivers/ide/qd65xx.c printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); printk 238 drivers/ide/qd65xx.c printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); printk 249 drivers/ide/qd65xx.c printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio); printk 254 drivers/ide/qd65xx.c printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO " printk 281 drivers/ide/qd65xx.c printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n"); printk 282 drivers/ide/qd65xx.c printk(KERN_ERR "Please contact maintainers to tell about your hardware\n"); printk 283 drivers/ide/qd65xx.c printk(KERN_ERR "Assuming qd65xx is not present.\n"); printk 377 drivers/ide/qd65xx.c printk(KERN_WARNING "qd6500 is disabled !\n"); printk 381 drivers/ide/qd65xx.c printk(KERN_NOTICE "qd6500 at %#x\n", base); printk 382 drivers/ide/qd65xx.c printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", printk 395 drivers/ide/qd65xx.c printk(KERN_NOTICE "qd6580 at %#x\n", base); printk 396 drivers/ide/qd65xx.c printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n", printk 405 drivers/ide/qd65xx.c printk(KERN_INFO "qd6580: %s IDE board\n", printk 32 drivers/ide/rz1000.c printk(KERN_INFO "%s: disabled chipset read-ahead " printk 36 drivers/ide/rz1000.c printk(KERN_INFO "%s: serialized, disabled unmasking " printk 180 drivers/ide/sc1200.c printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n", printk 214 drivers/ide/sc1200.c printk("SC1200: %s: changing (U)DMA mode\n", drive->name); printk 232 drivers/ide/sc1200.c printk("SC1200: suspend(%u)\n", state.event); printk 185 drivers/ide/serverworks.c printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS " printk 43 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: device not capable of full " printk 47 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: placing both ports into native PCI " printk 52 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: rewrite of PROGIF failed, " printk 96 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: DMA base is invalid\n", printk 119 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: simplex device: DMA forced\n", printk 136 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: simplex device: DMA disabled\n", printk 159 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: error updating PCICMD\n", printk 172 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n", printk 201 drivers/ide/setup-pci.c printk(KERN_WARNING "%s %s: couldn't enable device\n", printk 205 drivers/ide/setup-pci.c printk(KERN_WARNING "%s %s: BIOS configuration fixed\n", printk 216 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: can't set DMA mask\n", printk 223 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: can't reserve resources\n", printk 250 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: device disabled (BIOS)\n", printk 255 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: error accessing PCI regs\n", printk 260 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: unable to enable IDE controller\n", printk 316 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are " printk 331 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n", printk 378 drivers/ide/setup-pci.c printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); printk 380 drivers/ide/setup-pci.c printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", printk 420 drivers/ide/setup-pci.c printk(KERN_ERR "%s %s: error accessing PCI regs\n", printk 428 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: device enabled (Linux)\n", printk 471 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: IDE port disabled\n", printk 517 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: not 100%% native mode: will " printk 521 drivers/ide/setup-pci.c printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n", printk 524 drivers/ide/setup-pci.c printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n", printk 375 drivers/ide/siimage.c printk(KERN_WARNING "%s: sata_error = 0x%08x, " printk 420 drivers/ide/siimage.c printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", printk 530 drivers/ide/siimage.c printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n", printk 613 drivers/ide/siimage.c printk(KERN_INFO "%s: applying pessimistic Seagate " printk 752 drivers/ide/siimage.c printk(KERN_INFO DRV_NAME ": For full SATA support you " printk 771 drivers/ide/siimage.c printk(KERN_WARNING DRV_NAME " %s: MMIO ports not " printk 388 drivers/ide/sis5513.c printk(KERN_INFO DRV_NAME " %s: %s %s controller\n", printk 405 drivers/ide/sis5513.c printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n", printk 415 drivers/ide/sis5513.c printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n", printk 440 drivers/ide/sis5513.c printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n", printk 444 drivers/ide/sis5513.c printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n", printk 88 drivers/ide/sl82c105.c printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name, printk 155 drivers/ide/sl82c105.c printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n"); printk 162 drivers/ide/sl82c105.c printk(KERN_INFO "sl82c105: drive was requesting IRQ, " printk 172 drivers/ide/sl82c105.c printk(KERN_INFO "sl82c105: DMA was enabled\n"); printk 328 drivers/ide/sl82c105.c printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge " printk 79 drivers/ide/tc86c001.c printk(KERN_WARNING "%s: DMA interrupt possibly stuck, " printk 217 drivers/ide/tc86c001.c printk(KERN_ERR DRV_NAME ": system control regs already in use"); printk 242 drivers/ide/trm290.c printk(KERN_INFO DRV_NAME " %s: chip", pci_name(dev)); printk 245 drivers/ide/trm290.c printk(KERN_INFO DRV_NAME " %s: using default", pci_name(dev)); printk 247 drivers/ide/trm290.c printk(KERN_CONT " config base at 0x%04x\n", cfg_base); printk 251 drivers/ide/trm290.c printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", printk 295 drivers/ide/trm290.c printk(KERN_INFO "%s: control basereg workaround: " printk 278 drivers/ide/tx4939ide.c printk(KERN_ERR "%s: %s\n", drive->name, printk 104 drivers/ide/umc8672.c printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", printk 114 drivers/ide/umc8672.c printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", printk 119 drivers/ide/umc8672.c printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n"); printk 145 drivers/ide/umc8672.c printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n"); printk 152 drivers/ide/umc8672.c printk(KERN_ERR "umc8672: not found\n"); printk 434 drivers/ide/via82cxxx.c printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n", printk 454 drivers/ide/via82cxxx.c printk(KERN_WARNING DRV_NAME ": User given PCI clock speed " printk 474 drivers/ide/via82cxxx.c printk(KERN_ERR DRV_NAME " %s: out of memory :(\n", printk 1448 drivers/idle/intel_idle.c printk(KERN_DEBUG pr_fmt("intel_idle yielding to %s\n"), printk 208 drivers/infiniband/core/device.c printk("%s%s: %pV", printk 211 drivers/infiniband/core/device.c printk("%s(NULL ib_device): %pV", level, vaf); printk 230 drivers/infiniband/hw/mthca/mthca_av.c printk(KERN_DEBUG " [%2x] %08x\n", printk 76 drivers/infiniband/hw/mthca/mthca_catas.c printk(KERN_ERR "mthca %s: Reset failed (%d)\n", printk 1795 drivers/infiniband/hw/mthca/mthca_cmd.c printk(" %08x\n", be32_to_cpup(mailbox->buf)); printk 1798 drivers/infiniband/hw/mthca/mthca_cmd.c printk("[%02x] ", i * 4); printk 1799 drivers/infiniband/hw/mthca/mthca_cmd.c printk(" %08x", printk 1802 drivers/infiniband/hw/mthca/mthca_cmd.c printk("\n"); printk 1812 drivers/infiniband/hw/mthca/mthca_cmd.c printk(" opt param mask: %08x\n", be32_to_cpup(mailbox->buf)); printk 1815 drivers/infiniband/hw/mthca/mthca_cmd.c printk(" [%02x] ", i * 4); printk 1816 drivers/infiniband/hw/mthca/mthca_cmd.c printk(" %08x", printk 1819 drivers/infiniband/hw/mthca/mthca_cmd.c printk("\n"); printk 918 drivers/infiniband/hw/mthca/mthca_cq.c printk(KERN_ERR "context for CQN %x (cons index %x, next sw %d)\n", printk 922 drivers/infiniband/hw/mthca/mthca_cq.c printk(KERN_ERR "[%2x] %08x\n", j * 4, be32_to_cpu(ctx[j])); printk 611 drivers/infiniband/hw/mthca/mthca_eq.c printk("[%02x] ", i * 4); printk 612 drivers/infiniband/hw/mthca/mthca_eq.c printk(" %08x", be32_to_cpup(mailbox->buf + i * 4)); printk 614 drivers/infiniband/hw/mthca/mthca_eq.c printk("\n"); printk 903 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_INFO PFX "Initializing %s\n", printk 1144 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_ERR PFX "%s has invalid driver data %lx\n", printk 1209 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_WARNING PFX "Invalid value %d for %s in module parameter.\n", printk 1211 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_WARNING PFX "Corrected %s to %d.\n", name, *pval); printk 1230 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_WARNING PFX "Invalid fmr_reserved_mtts module parameter %d.\n", printk 1232 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_WARNING PFX "(Must be smaller than num_mtt %d)\n", printk 1235 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n", printk 1240 drivers/infiniband/hw/mthca/mthca_main.c printk(KERN_WARNING PFX "bad log_mtts_per_seg (%d). Using default - %d\n", printk 484 drivers/infiniband/hw/mthca/mthca_mr.c printk("[%02x] ", i * 4); printk 485 drivers/infiniband/hw/mthca/mthca_mr.c printk(" %08x", be32_to_cpu(((__be32 *) mpt_entry)[i])); printk 487 drivers/infiniband/hw/mthca/mthca_mr.c printk("\n"); printk 647 drivers/infiniband/hw/mthca/mthca_mr.c printk("[%02x] ", i * 4); printk 648 drivers/infiniband/hw/mthca/mthca_mr.c printk(" %08x", be32_to_cpu(((__be32 *) mpt_entry)[i])); printk 650 drivers/infiniband/hw/mthca/mthca_mr.c printk("\n"); printk 48 drivers/infiniband/hw/usnic/usnic_log.h printk(lvl "%s:%s:%d: ", DRV_NAME, __func__, \ printk 50 drivers/infiniband/hw/usnic/usnic_log.h printk(args); \ printk 797 drivers/infiniband/ulp/ipoib/ipoib.h printk(level "%s: " format, ((struct ipoib_dev_priv *) priv)->dev->name , ## arg) printk 78 drivers/infiniband/ulp/iser/iscsi_iser.h printk(KERN_DEBUG PFX "%s: " fmt,\ printk 17 drivers/infiniband/ulp/isert/ib_isert.h printk(KERN_DEBUG PFX "%s: " fmt,\ printk 27 drivers/input/evbug.c printk(KERN_DEBUG pr_fmt("Event. Dev: %s, Type: %d, Code: %d, Value: %d\n"), printk 53 drivers/input/evbug.c printk(KERN_DEBUG pr_fmt("Connected device: %s (%s at %s)\n"), printk 69 drivers/input/evbug.c printk(KERN_DEBUG pr_fmt("Disconnected device: %s\n"), printk 52 drivers/input/gameport/emu10k1-gp.c printk(KERN_ERR "emu10k1-gp: Memory allocation failed\n"); printk 73 drivers/input/gameport/emu10k1-gp.c printk(KERN_ERR "emu10k1-gp: unable to grab region 0x%x-0x%x\n", printk 74 drivers/input/gameport/fm801-gp.c printk(KERN_ERR "fm801-gp: Memory allocation failed\n"); printk 95 drivers/input/gameport/fm801-gp.c printk(KERN_DEBUG "fm801-gp: unable to grab region 0x%x-0x%x\n", printk 215 drivers/input/gameport/lightning.c printk(KERN_ERR "lightning: Memory allocation failed\n"); printk 274 drivers/input/gameport/lightning.c printk(KERN_INFO "gameport: PDPI Lightning 4 %s card v%d.%d at %#x\n", printk 129 drivers/input/gameport/ns558.c printk(KERN_ERR "ns558: Memory allocation failed.\n"); printk 188 drivers/input/gameport/ns558.c printk(KERN_WARNING "ns558: No i/o ports on a gameport? Weird\n"); printk 201 drivers/input/gameport/ns558.c printk(KERN_ERR "ns558: Memory allocation failed\n"); printk 281 drivers/input/joystick/a3d.c printk(KERN_WARNING "a3d.c: Unknown A3D device detected " printk 346 drivers/input/joystick/a3d.c printk(KERN_ERR "a3d: Not enough memory for ADC port\n"); printk 322 drivers/input/joystick/adi.c printk(KERN_WARNING "adi: Short ID packet: reported: %d != read: %d\n", t, adi->ret); printk 333 drivers/input/joystick/adi.c printk(KERN_WARNING "adi: Bad data packet length (%d).\n", adi->length); printk 342 drivers/input/joystick/adi.c printk(KERN_WARNING "adi: Other than 8-dir POVs not supported yet.\n"); printk 365 drivers/input/joystick/adi.c printk(KERN_WARNING "adi: Expected length %d != data length %d\n", t, adi->length); printk 70 drivers/input/joystick/amijoy.c printk(KERN_ERR "amijoy.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB); printk 547 drivers/input/joystick/analog.c printk(KERN_WARNING "analog.c: Unknown joystick device found " printk 709 drivers/input/joystick/analog.c printk(KERN_INFO "analog.c: %d out of %d reads (%d%%) on %s failed\n", printk 754 drivers/input/joystick/analog.c printk(KERN_WARNING "analog.c: Bad config for port %d - \"%s\"\n", i, js[i]); printk 163 drivers/input/joystick/cobra.c printk(KERN_WARNING "cobra.c: Device %d on %s has the Ext bit set. ID is: %d" printk 573 drivers/input/joystick/db9.c printk(KERN_ERR "db9.c: Bad device type %d\n", mode); printk 580 drivers/input/joystick/db9.c printk(KERN_ERR "db9.c: specified parport is not bidirectional\n"); printk 589 drivers/input/joystick/db9.c printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n"); printk 607 drivers/input/joystick/db9.c printk(KERN_ERR "db9.c: Not enough memory for input device\n"); printk 692 drivers/input/joystick/db9.c printk(KERN_ERR "db9.c: Device type must be specified.\n"); printk 273 drivers/input/joystick/gf2k.c printk(KERN_WARNING "gf2k.c: Not yet supported joystick on %s. [id: %d type:%s]\n", printk 29 drivers/input/joystick/grip_mp.c #define dbg(format, arg...) printk(KERN_ERR __FILE__ ": " format "\n" , ## arg) printk 396 drivers/input/joystick/grip_mp.c printk(KERN_INFO "grip_mp: removing %s, slot %d\n", printk 437 drivers/input/joystick/grip_mp.c printk(KERN_INFO "Possible non-grip pad/joystick detected.\n"); printk 438 drivers/input/joystick/grip_mp.c printk(KERN_INFO "Got joy type 0x%x and packet 0x%x.\n", joytype, packet); printk 197 drivers/input/joystick/guillemot.c printk(KERN_WARNING "guillemot.c: Unknown joystick on %s. [ %02x%02x:%04x, ver %d.%02d ]\n", printk 252 drivers/input/joystick/guillemot.c printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys); printk 226 drivers/input/joystick/interact.c printk(KERN_WARNING "interact.c: Unknown joystick on %s. [len %d d0 %08x d1 %08x i2 %08x]\n", printk 42 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: ,------------------ START ----------------.\n"); printk 43 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | Dumping: %30s |\n", gameport->phys); printk 44 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | Speed: %28d kHz |\n", gameport->speed); printk 48 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | Raw mode not available - trying cooked. |\n"); printk 52 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | Cooked not available either. Failing. |\n"); printk 53 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: `------------------- END -----------------'\n"); printk 60 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | Axis %d: %4d. |\n", i, axes[i]); printk 61 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | Buttons %02x. |\n", buttons); printk 62 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: `------------------- END -----------------'\n"); printk 69 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: no memory for testing\n"); printk 109 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: >------------------ DATA -----------------<\n"); printk 110 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | index: %3d delta: %3d us data: ", 0, 0); printk 112 drivers/input/joystick/joydump.c printk("%d", (dump->data >> j) & 1); printk 113 drivers/input/joystick/joydump.c printk(" |\n"); printk 117 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: | index: %3d delta: %3d us data: ", printk 120 drivers/input/joystick/joydump.c printk("%d", (dump->data >> j) & 1); printk 121 drivers/input/joystick/joydump.c printk(" |\n"); printk 126 drivers/input/joystick/joydump.c printk(KERN_INFO "joydump: `------------------- END -----------------'\n"); printk 46 drivers/input/joystick/sidewinder.c #define dbg(format, arg...) printk(KERN_DEBUG __FILE__ ": " format "\n" , ## arg) printk 183 drivers/input/joystick/sidewinder.c printk(KERN_DEBUG "sidewinder.c: Read %d triplets. [", i); printk 184 drivers/input/joystick/sidewinder.c for (j = 0; j < i; j++) printk("%d", buf[j]); printk 185 drivers/input/joystick/sidewinder.c printk("]\n"); printk 419 drivers/input/joystick/sidewinder.c printk(KERN_WARNING "sidewinder.c: Joystick in wrong mode on %s" printk 445 drivers/input/joystick/sidewinder.c printk(KERN_INFO "sidewinder.c: No more trouble on %s" printk 458 drivers/input/joystick/sidewinder.c printk(KERN_INFO "sidewinder.c: Many bit errors on %s" printk 466 drivers/input/joystick/sidewinder.c printk(KERN_WARNING "sidewinder.c: Too many bit errors on %s" printk 516 drivers/input/joystick/sidewinder.c printk(KERN_INFO "sidewinder.c: %s packet, %d bits. [", name, length); printk 518 drivers/input/joystick/sidewinder.c printk("%x", (int)sw_get_bits(buf, i << 2, 4, bits)); printk 519 drivers/input/joystick/sidewinder.c printk("]\n"); printk 698 drivers/input/joystick/sidewinder.c printk(KERN_WARNING "sidewinder.c: unknown joystick device detected " printk 114 drivers/input/joystick/spaceball.c printk(KERN_ERR "spaceball: Device error. [%s]\n", spaceball->data + 1); printk 119 drivers/input/joystick/spaceball.c printk(KERN_ERR "spaceball: Bad command. [%s]\n", spaceball->data + 1); printk 75 drivers/input/joystick/spaceorb.c printk(KERN_INFO "input: %s [%s] is %s\n", printk 103 drivers/input/joystick/spaceorb.c printk(KERN_ERR "spaceorb: Device error. [ "); printk 104 drivers/input/joystick/spaceorb.c for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); printk 105 drivers/input/joystick/spaceorb.c printk("]\n"); printk 180 drivers/input/joystick/turbografx.c printk(KERN_ERR "turbografx.c: Not enough memory\n"); printk 194 drivers/input/joystick/turbografx.c printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]); printk 200 drivers/input/joystick/turbografx.c printk(KERN_ERR "turbografx.c: Not enough memory for input device\n"); printk 234 drivers/input/joystick/turbografx.c printk(KERN_ERR "turbografx.c: No valid devices specified\n"); printk 293 drivers/input/joystick/turbografx.c printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); printk 192 drivers/input/keyboard/amikbd.c printk(amikbd_messages[scancode - 0x78]); printk 179 drivers/input/keyboard/atakbd.c printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode); printk 133 drivers/input/keyboard/hil_kbd.c printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); printk 214 drivers/input/keyboard/hil_kbd.c printk(KERN_WARNING PREFIX printk 269 drivers/input/keyboard/hil_kbd.c printk(KERN_WARNING PREFIX "errored HIL packet\n"); printk 349 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n", printk 435 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX printk 438 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX printk 513 drivers/input/keyboard/hil_kbd.c printk(KERN_INFO PREFIX printk 218 drivers/input/keyboard/hilkbd.c printk(KERN_ERR "HIL: Can't get IRQ\n"); printk 231 drivers/input/keyboard/hilkbd.c printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); printk 237 drivers/input/keyboard/hilkbd.c printk(KERN_WARNING "HIL: no keyboard present\n"); printk 240 drivers/input/keyboard/hilkbd.c printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid); printk 267 drivers/input/keyboard/hilkbd.c printk(KERN_ERR "HIL: Can't register device\n"); printk 271 drivers/input/keyboard/hilkbd.c printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", printk 305 drivers/input/keyboard/hilkbd.c printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n", printk 314 drivers/input/keyboard/hilkbd.c printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq); printk 367 drivers/input/keyboard/hilkbd.c printk(KERN_ERR "HIL: hardware register was not found\n"); printk 372 drivers/input/keyboard/hilkbd.c printk(KERN_ERR "HIL: IOPORT region already used\n"); printk 95 drivers/input/keyboard/lkkbd.c #define DBG(x...) printk(x) printk 374 drivers/input/keyboard/lkkbd.c printk(KERN_ERR printk 377 drivers/input/keyboard/lkkbd.c printk(KERN_ERR "lkkbd: keyboard ID'ed as:"); printk 379 drivers/input/keyboard/lkkbd.c printk(" 0x%02x", lk->id[i]); printk 380 drivers/input/keyboard/lkkbd.c printk("\n"); printk 384 drivers/input/keyboard/lkkbd.c printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n", printk 396 drivers/input/keyboard/lkkbd.c printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n", printk 401 drivers/input/keyboard/lkkbd.c printk(KERN_ERR printk 407 drivers/input/keyboard/lkkbd.c printk(KERN_ERR printk 417 drivers/input/keyboard/lkkbd.c printk(KERN_ERR printk 479 drivers/input/keyboard/lkkbd.c printk(KERN_WARNING printk 555 drivers/input/keyboard/lkkbd.c printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n", printk 242 drivers/input/keyboard/locomokbd.c printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n"); printk 285 drivers/input/keyboard/locomokbd.c printk(KERN_ERR "locomokbd: Can't get irq for keyboard\n"); printk 62 drivers/input/keyboard/newtonkbd.c printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys); printk 114 drivers/input/keyboard/omap-keypad.c printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col, printk 186 drivers/input/keyboard/omap-keypad.c printk(KERN_ERR "No rows, cols or keymap_data from pdata\n"); printk 254 drivers/input/keyboard/omap-keypad.c printk(KERN_ERR "Unable to register omap-keypad input device\n"); printk 123 drivers/input/keyboard/sunkbd.c printk(KERN_WARNING printk 62 drivers/input/keyboard/xtkbd.c printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n", printk 897 drivers/input/misc/cm109.c printk(KERN_INFO KBUILD_MODNAME ": " printk 901 drivers/input/misc/cm109.c printk(KERN_INFO KBUILD_MODNAME ": " printk 905 drivers/input/misc/cm109.c printk(KERN_INFO KBUILD_MODNAME ": " printk 909 drivers/input/misc/cm109.c printk(KERN_INFO KBUILD_MODNAME ": " printk 912 drivers/input/misc/cm109.c printk(KERN_ERR KBUILD_MODNAME ": " printk 932 drivers/input/misc/cm109.c printk(KERN_INFO KBUILD_MODNAME ": " printk 700 drivers/input/misc/hp_sdc_rtc.c printk(KERN_INFO "Could not register misc. dev for i8042 rtc\n"); printk 704 drivers/input/misc/hp_sdc_rtc.c printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support loaded " printk 715 drivers/input/misc/hp_sdc_rtc.c printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support unloaded\n"); printk 109 drivers/input/misc/m68kspkr.c printk(KERN_INFO "m68kspkr: no lowlevel beep support\n"); printk 174 drivers/input/misc/powermate.c printk(KERN_ERR "powermate: unknown update required"); printk 190 drivers/input/misc/powermate.c printk(KERN_ERR "powermate: usb_submit_urb(config) failed"); printk 200 drivers/input/misc/powermate.c printk(KERN_ERR "powermate: config urb returned %d\n", urb->status); printk 357 drivers/input/misc/powermate.c printk(KERN_WARNING "powermate: unknown product id %04x\n", printk 380 drivers/input/misc/powermate.c printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n", printk 314 drivers/input/misc/uinput.c printk(KERN_DEBUG "%s: write device info first\n", UINPUT_NAME); printk 336 drivers/input/misc/uinput.c printk(KERN_DEBUG "%s: ff_effects_max should be non-zero when FF_BIT is set\n", printk 406 drivers/input/misc/uinput.c printk(KERN_DEBUG printk 413 drivers/input/misc/uinput.c printk(KERN_DEBUG printk 101 drivers/input/misc/wistron_btns.c printk(KERN_ERR "wistron_btns: BIOS entry point not found\n"); printk 107 drivers/input/misc/wistron_btns.c printk(KERN_DEBUG printk 118 drivers/input/misc/wistron_btns.c printk(KERN_ERR printk 128 drivers/input/misc/wistron_btns.c printk(KERN_ERR "wistron_btns: Can't map BIOS data\n"); printk 1016 drivers/input/misc/wistron_btns.c printk(KERN_ERR "wistron_btns: Keymap unknown\n"); printk 1022 drivers/input/misc/wistron_btns.c printk(KERN_ERR "wistron_btns: System unknown\n"); printk 1142 drivers/input/misc/wistron_btns.c printk(KERN_NOTICE printk 1200 drivers/input/misc/wistron_btns.c printk(KERN_WARNING "Untested laptop multimedia keys, " printk 222 drivers/input/mouse/appletouch.c printk(KERN_DEBUG "appletouch: %s", msg); \ printk 224 drivers/input/mouse/appletouch.c printk(" %02x", tab[__i]); \ printk 225 drivers/input/mouse/appletouch.c printk("\n"); \ printk 231 drivers/input/mouse/appletouch.c printk(KERN_DEBUG format, ##a); \ printk 612 drivers/input/mouse/appletouch.c printk(KERN_DEBUG "appletouch: " printk 732 drivers/input/mouse/appletouch.c printk(KERN_DEBUG "appletouch: X: %3d Y: %3d " printk 160 drivers/input/mouse/bcm5974.c { if (debug >= level) printk(KERN_DEBUG format, ##a); } printk 120 drivers/input/mouse/inport.c printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE); printk 128 drivers/input/mouse/inport.c printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE); printk 135 drivers/input/mouse/inport.c printk(KERN_ERR "inport.c: Not enough memory for input device\n"); printk 91 drivers/input/mouse/logibm.c printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); printk 109 drivers/input/mouse/logibm.c printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); printk 118 drivers/input/mouse/logibm.c printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); printk 128 drivers/input/mouse/logibm.c printk(KERN_ERR "logibm.c: Not enough memory for input device\n"); printk 101 drivers/input/mouse/pc110pad.c printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n", printk 109 drivers/input/mouse/pc110pad.c printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq); printk 116 drivers/input/mouse/pc110pad.c printk(KERN_ERR "pc110pad: Not enough memory.\n"); printk 87 drivers/input/mouse/rpcmouse.c printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n"); printk 174 drivers/input/mouse/sermouse.c printk(KERN_WARNING printk 82 drivers/input/mouse/vsxxxaa.c #define DBG(x...) printk(x) printk 127 drivers/input/mouse/vsxxxaa.c printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n", printk 157 drivers/input/mouse/vsxxxaa.c printk(KERN_INFO printk 178 drivers/input/mouse/vsxxxaa.c printk(KERN_ERR printk 355 drivers/input/mouse/vsxxxaa.c printk(KERN_INFO "Your %s on %s reports error=0x%02x\n", printk 364 drivers/input/mouse/vsxxxaa.c printk(KERN_NOTICE printk 392 drivers/input/mouse/vsxxxaa.c printk(KERN_ERR "%s on %s: Dropping a byte to regain " printk 427 drivers/input/mouse/vsxxxaa.c printk(KERN_ERR "Dropping %d bytes now...\n", printk 191 drivers/input/rmi4/rmi_f03.c printk(KERN_INFO "serio: %s port at %s\n", printk 81 drivers/input/serio/ambakmi.c printk(KERN_ERR "kmi: failed to claim IRQ%d\n", kmi->irq); printk 85 drivers/input/serio/ct82c710.c printk(KERN_WARNING "ct82c710.c: Device busy in close()\n"); printk 90 drivers/input/serio/ct82c710.c printk(KERN_WARNING "ct82c710.c: Device busy in close()\n"); printk 116 drivers/input/serio/ct82c710.c printk(KERN_ERR "ct82c710: Device busy in open()\n"); printk 180 drivers/input/serio/ct82c710.c printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n", printk 152 drivers/input/serio/gscps2.c printk(KERN_DEBUG PFX "timeout - could not write byte %#x\n", data); printk 287 drivers/input/serio/gscps2.c printk(KERN_DEBUG PFX "sending byte %#x failed.\n", data); printk 373 drivers/input/serio/gscps2.c printk(KERN_WARNING PFX "Unsupported PS/2 port at 0x%08lx (id=%d) ignored\n", printk 251 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX "new in slot %i\n", rc); printk 263 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX "same in slot %i\n", rc); printk 270 drivers/input/serio/hil_mlc.c printk(KERN_ERR PREFIX "Residual device slots exhausted, close some serios!\n"); printk 420 drivers/input/serio/hil_mlc.c printk(KERN_INFO PREFIX "Device name gotten: %16s\n", printk 627 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX "z%i \n {%i}", doze, mlc->seidx); printk 772 drivers/input/serio/hil_mlc.c printk(KERN_DEBUG PREFIX " + "); printk 261 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n"); printk 282 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "NMI !\n"); printk 292 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "HIL NMI\n"); printk 321 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "read timeout (%lldus)!\n", printk 623 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "No free slot to add transaction.\n"); printk 627 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Transaction add failed: transaction already queued?\n"); printk 920 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n", printk 990 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error unregistering HP SDC"); printk 1004 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "HP SDC driver disabled by no_hpsdc=1.\n"); printk 1012 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error registering SDC with system bus tree.\n"); printk 1029 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "No SDC found.\n"); printk 1054 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error reading config byte.\n"); printk 1061 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "New style SDC\n"); printk 1070 drivers/input/serio/hp_sdc.c printk(KERN_WARNING PREFIX "Error reading extended config byte.\n"); printk 1075 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "Revision: %s\n", str); printk 1077 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "TI SN76494 beeper present\n"); printk 1079 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "OKI MSM-58321 BBRTC present\n"); printk 1080 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "Spunking the self test register to force PUP " printk 1095 drivers/input/serio/hp_sdc.c printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n", printk 69 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "HIL Overflow!\n"); printk 107 drivers/input/serio/hp_sdc_mlc.c printk(KERN_DEBUG PREFIX "err code %x\n", data); printk 111 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Bastard SDC reconfigured loop!\n"); printk 124 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Bastard SDC decided to reconfigure loop!\n"); printk 128 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data); printk 312 drivers/input/serio/hp_sdc_mlc.c printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n"); printk 326 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n"); printk 331 drivers/input/serio/hp_sdc_mlc.c printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n"); printk 333 drivers/input/serio/hp_sdc_mlc.c printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n" printk 346 drivers/input/serio/hp_sdc_mlc.c printk(KERN_ERR PREFIX "Failed to release the raw HIL ISR hook.\n" printk 350 drivers/input/serio/hp_sdc_mlc.c printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n" printk 1408 drivers/input/serio/i8042.c printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n", printk 70 drivers/input/serio/i8042.h printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format, \ printk 89 drivers/input/serio/i8042.h printk(KERN_DEBUG pr_fmt(format), ##arg); \ printk 90 drivers/input/serio/maceps2.c printk(KERN_ERR "Could not allocate PS/2 IRQ\n"); printk 200 drivers/input/serio/parkbd.c printk(KERN_INFO "serio: PARKBD %s adapter on %s\n", printk 144 drivers/input/serio/q40kbd.c printk(KERN_INFO "serio: Q40 kbd registered\n"); printk 75 drivers/input/serio/rpckbd.c printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n"); printk 80 drivers/input/serio/rpckbd.c printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n"); printk 152 drivers/input/serio/sa1111ps2.c printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", printk 161 drivers/input/serio/sa1111ps2.c printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", printk 229 drivers/input/serio/sa1111ps2.c printk("PS/2 interface test failed[1]: %02x\n", stat); printk 235 drivers/input/serio/sa1111ps2.c printk("PS/2 interface test failed[2]: %02x\n", stat); printk 241 drivers/input/serio/sa1111ps2.c printk("PS/2 interface test failed[3]: %02x\n", stat); printk 182 drivers/input/serio/serport.c printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty)); printk 296 drivers/input/serio/serport.c printk(KERN_ERR "serport.c: Error registering line discipline.\n"); printk 50 drivers/input/touchscreen/gunze.c printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data); printk 98 drivers/input/touchscreen/hp680_ts_input.c printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", printk 108 drivers/input/touchscreen/htcpen.c printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n", printk 114 drivers/input/touchscreen/htcpen.c printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n", printk 120 drivers/input/touchscreen/htcpen.c printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n", printk 127 drivers/input/touchscreen/htcpen.c printk(KERN_ERR "htcpen: can't allocate device\n"); printk 146 drivers/input/touchscreen/htcpen.c printk(KERN_ERR "htcpen: irq busy\n"); printk 84 drivers/input/touchscreen/inexio.c printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]); printk 153 drivers/input/touchscreen/mk712.c printk(KERN_WARNING "mk712: unable to get IO region\n"); printk 162 drivers/input/touchscreen/mk712.c printk(KERN_WARNING "mk712: device not present\n"); printk 169 drivers/input/touchscreen/mk712.c printk(KERN_ERR "mk712: not enough memory\n"); printk 190 drivers/input/touchscreen/mk712.c printk(KERN_WARNING "mk712: unable to get IRQ\n"); printk 81 drivers/input/touchscreen/mtouch.c printk(KERN_ERR "mtouch.c: too many response bytes\n"); printk 98 drivers/input/touchscreen/mtouch.c printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]); printk 1019 drivers/input/touchscreen/usbtouchscreen.c printk(KERN_INFO "Nexio device: %s, firmware version: %s\n", printk 401 drivers/iommu/amd_iommu_types.h printk(KERN_INFO "AMD-Vi: " format, ## arg); \ printk 465 drivers/iommu/intel-iommu.c printk(KERN_INFO printk 256 drivers/iommu/iova.c printk(KERN_ERR "Couldn't create iova cache\n"); printk 721 drivers/iommu/iova.c printk(KERN_ERR "Reserve iova range %lx@%lx failed\n", printk 192 drivers/irqchip/irq-i8259.c printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); printk 103 drivers/irqchip/irq-vic.c printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); printk 133 drivers/irqchip/irq-vic.c printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); printk 274 drivers/irqchip/irq-vic.c printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); printk 446 drivers/irqchip/irq-vic.c printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", printk 454 drivers/irqchip/irq-vic.c printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); printk 148 drivers/isdn/capi/capi.c printk(KERN_ERR "capi: alloc datahandle failed\n"); printk 215 drivers/isdn/capi/capi.c printk(KERN_ERR "capi: can't alloc capiminor\n"); printk 241 drivers/isdn/capi/capi.c printk(KERN_NOTICE "capi: out of minors\n"); printk 442 drivers/isdn/capi/capi.c printk(KERN_ERR "capi: gen_data_b3_resp failed\n"); printk 456 drivers/isdn/capi/capi.c printk(KERN_ERR "capi: send DATA_B3_RESP failed=%x\n", printk 560 drivers/isdn/capi/capi.c printk(KERN_ERR "capi: put_message = %x\n", errcode); printk 602 drivers/isdn/capi/capi.c printk(KERN_ERR "BUG: capi_signal: ncci not found\n"); printk 1064 drivers/isdn/capi/capi.c printk(KERN_ERR "capinc_tty_write: alloc_skb failed\n"); printk 1109 drivers/isdn/capi/capi.c printk(KERN_ERR "capinc_put_char: char %u lost\n", ch); printk 1295 drivers/isdn/capi/capi.c printk(KERN_ERR "Couldn't register capi_nc driver\n"); printk 1387 drivers/isdn/capi/capi.c printk(KERN_ERR "capi20: unable to get major %d\n", capi_major); printk 1412 drivers/isdn/capi/capi.c printk(KERN_NOTICE "CAPI 2.0 started up with major %d%s\n", printk 9 drivers/isdn/capi/capilib.c printk(KERN_DEBUG "%s: " format "\n" , __func__ , ## arg); \ printk 87 drivers/isdn/capi/capilib.c printk(KERN_WARNING "capilib_new_ncci: no memory.\n"); printk 91 drivers/isdn/capi/capilib.c printk(KERN_ERR "capi_new_ncci: winsize %d too big\n", printk 116 drivers/isdn/capi/capilib.c printk(KERN_INFO "kcapi: appl %d ncci 0x%x down\n", applid, ncci); printk 121 drivers/isdn/capi/capilib.c printk(KERN_ERR "capilib_free_ncci: ncci 0x%x not found\n", ncci); printk 135 drivers/isdn/capi/capilib.c printk(KERN_INFO "kcapi: appl %d ncci 0x%x forced down\n", applid, np->ncci); printk 150 drivers/isdn/capi/capilib.c printk(KERN_INFO "kcapi: appl %d ncci 0x%x forced down\n", np->applid, np->ncci); printk 175 drivers/isdn/capi/capilib.c printk(KERN_ERR "capilib_data_b3_req: ncci 0x%x not found\n", ncci); printk 194 drivers/isdn/capi/capilib.c printk(KERN_ERR "kcapi: msgid %hu ncci 0x%x not on queue\n", printk 199 drivers/isdn/capi/capilib.c printk(KERN_ERR "capilib_data_b3_conf: ncci 0x%x not found\n", ncci); printk 167 drivers/isdn/capi/kcapi.c printk(KERN_WARNING "%s: cannot get controller resources\n", printk 189 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: notify up contr %d\n", contr); printk 206 drivers/isdn/capi/kcapi.c printk(KERN_WARNING "%s: invalid contr %d\n", __func__, contr); printk 243 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: notify down contr %d\n", contr); printk 249 drivers/isdn/capi/kcapi.c printk(KERN_WARNING "%s: invalid contr %d\n", __func__, contr); printk 354 drivers/isdn/capi/kcapi.c printk(KERN_INFO "kcapi: controller [%03d] not active, got: %s", printk 358 drivers/isdn/capi/kcapi.c printk(KERN_INFO "kcapi: controller [%03d] not active, cannot trace\n", printk 377 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: got [%03d] id#%d %s len=%u\n", printk 384 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: got [%03d] %s\n", printk 388 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: got [%03d] id#%d %s len=%u, cannot trace\n", printk 402 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: handle_message: applid %d state released (%s)\n", printk 406 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: handle_message: applid %d state released (%s) cannot trace\n", printk 432 drivers/isdn/capi/kcapi.c printk(KERN_NOTICE "kcapi: controller [%03d] \"%s\" ready.\n", printk 450 drivers/isdn/capi/kcapi.c printk(KERN_NOTICE "kcapi: controller [%03d] down.\n", ctr->cnr); printk 470 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: controller [%03d] suspend\n", printk 491 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: controller [%03d] resumed\n", printk 521 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: out of controller slots\n"); printk 544 drivers/isdn/capi/kcapi.c printk(KERN_NOTICE "kcapi: controller [%03d]: %s attached\n", printk 578 drivers/isdn/capi/kcapi.c printk(KERN_NOTICE "kcapi: controller [%03d]: %s unregistered\n", printk 708 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: appl %d up\n", applid); printk 752 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: appl %d down\n", ap->applid); printk 814 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: put [%03d] id#%d %s len=%u\n", printk 822 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: put [%03d] %s\n", printk 827 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: put [%03d] id#%d %s len=%u cannot trace\n", printk 1068 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: driver not loaded.\n"); printk 1071 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: driver has no add card function.\n"); printk 1103 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: load: no load function\n"); printk 1109 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: load: invalid parameter: length of t4file is %d ?\n", ldef.t4file.len); printk 1114 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: load: invalid parameter: dataptr is 0\n"); printk 1127 drivers/isdn/capi/kcapi.c printk(KERN_INFO "kcapi: load: contr=%d not in detect state\n", ldef.contr); printk 1163 drivers/isdn/capi/kcapi.c printk(KERN_DEBUG "kcapi: reset: no reset function\n"); printk 1215 drivers/isdn/capi/kcapi.c printk(KERN_INFO "kcapi: contr [%03d] set trace=%d\n", printk 1250 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: driver \"%s\" not loaded.\n", printk 1254 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: driver \"%s\" has no add card function.\n", cdef.driver); printk 1264 drivers/isdn/capi/kcapi.c printk(KERN_ERR "kcapi: manufacturer command %lu unknown.\n", printk 20 drivers/isdn/capi/kcapi.h printk(KERN_DEBUG "%s: " format "\n" , __func__ , ## arg); \ printk 99 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h printk(KERN_INFO printk 135 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h printk(KERN_WARNING printk 142 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h printk(KERN_INFO printk 149 drivers/isdn/hardware/mISDN/hfc_multi_8xx.h printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); printk 380 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 410 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 432 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 440 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n", printk 724 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back " printk 743 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver); printk 769 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "VPM: A-law mode\n"); printk 772 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg); printk 777 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg); printk 823 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2); printk 865 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n", printk 898 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n", printk 923 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n", printk 929 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "using provided controller\n"); printk 952 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 963 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "id=%d (0x%p) = syncronized with " printk 974 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "Schedule jatt PLL\n"); printk 981 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 988 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 993 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 1003 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "%s no pcm master, this MUST " printk 1019 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: GOT sync on card %d" printk 1027 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: LOST sync on card %d" printk 1047 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: entered\n", __func__); printk 1060 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: release PLXSD card %d\n", printk 1076 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n", printk 1099 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: done\n", __func__); printk 1125 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: entered\n", __func__); printk 1129 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val); printk 1134 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 1140 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 1148 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't " printk 1160 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: changing to 128K external RAM\n", printk 1171 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: changing to 512K external RAM\n", printk 1193 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: initializing PLXSD card %d\n", printk 1210 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n", printk 1228 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: card %d is between, so " printk 1238 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 1256 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: setting PCM into slave mode\n", printk 1261 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: setting PCM into master mode\n", printk 1266 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: performing PCM auto detect\n", printk 1301 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n", printk 1307 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n", printk 1341 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 1351 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_NOTICE "Setting GPIOs\n"); printk 1355 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_NOTICE "calling vpm_init\n"); printk 1363 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 1372 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 1378 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller is PCM bus MASTER\n"); printk 1381 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller is PCM bus SLAVE\n"); printk 1384 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller is PCM bus SLAVE " printk 1391 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "HFC_multi ERROR, getting no 125us " printk 1397 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller is PCM bus SLAVE " printk 1403 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "HFC_multi ERROR, no clock " printk 1419 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: master: " printk 1431 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "HFC_multi F0_CNT %ld after " printk 1436 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller is PCM bus MASTER " printk 1454 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n", printk 1460 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller has given PCM BUS ID %d\n", printk 1468 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "controller has PCM BUS ID %d " printk 1483 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: enabling DTMF detection " printk 1530 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: setting ST master clock " printk 1542 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n", printk 1558 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 1565 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "aborting - %d RAM access errors\n", err); printk 1571 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: done\n", __func__); printk 1839 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__); printk 1850 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: dtmf channel %d:", printk 1864 drivers/isdn/hardware/mISDN/hfcmulti.c printk(" %04x", w_float); printk 1883 drivers/isdn/hardware/mISDN/hfcmulti.c printk(" %04x", w_float); printk 1899 drivers/isdn/hardware/mISDN/hfcmulti.c printk(" DTMF ready %08x %08x %08x %08x " printk 1908 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: No memory for skb\n", printk 1990 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2023 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s(card %d): reread z2 because " printk 2047 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2081 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: buffer empty, so we have " printk 2092 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: disconnecting PCM due to " printk 2132 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space " printk 2223 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2233 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s(card %d): reread z2 because " printk 2276 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d " printk 2284 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2302 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2311 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2324 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: No mem\n", printk 2333 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s(card %d):", printk 2337 drivers/isdn/hardware/mISDN/hfcmulti.c printk(" %02x", (*sp)->data[temp++]); printk 2338 drivers/isdn/hardware/mISDN/hfcmulti.c printk("\n"); printk 2353 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2373 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: %s\n", __func__, msg); printk 2397 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "Enable SYNC_I\n"); printk 2405 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "Enable jatt PLL\n"); printk 2410 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2436 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2498 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2513 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2524 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2534 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2544 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2583 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: reread " printk 2616 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2693 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "HFC-multi: Spurious interrupt!\n"); printk 2701 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "irq for card %d during irq from " printk 2734 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n", printk 2778 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: reread " printk 2785 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2810 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: got V_IRQ_PROC -" printk 2873 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2882 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: remove from slot %d (TX)\n", printk 2892 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2902 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2911 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 2935 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: put channel %d to slot %d bank" printk 2964 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: put channel %d to slot %d bank" printk 3014 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3018 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3163 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: protocol not known %x\n", printk 3233 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3254 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3288 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3313 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: unknown command %x\n", printk 3358 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3366 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3391 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3398 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3479 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n", printk 3497 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3516 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3523 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n", printk 3528 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR printk 3579 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n", printk 3589 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HW_FEATURE request\n", printk 3612 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3622 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 3632 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HFC_PCM_DISC\n", printk 3639 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n", printk 3644 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 3652 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__); printk 3657 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__); printk 3666 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n", printk 3689 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: cmd:%x %p\n", printk 3706 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "%s: unknown prim(%x)\n", printk 3724 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__); printk 3733 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3738 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3771 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3794 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: S/T NT newstate %x\n", printk 3854 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: entered\n", __func__); printk 3907 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: E1 port is NT-mode\n", printk 3913 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: E1 port is TE-mode\n", printk 3929 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3937 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3944 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: E1 port is " printk 3987 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 3996 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4036 drivers/isdn/hardware/mISDN/hfcmulti.c printk("%s: done\n", __func__); printk 4048 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__, printk 4055 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: change protocol %x to %x\n", printk 4077 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "%s:cannot get module\n", __func__); printk 4098 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "%s:internal error ch %d has no bch\n", printk 4108 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "%s:cannot get module\n", __func__); printk 4130 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s" printk 4150 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n", printk 4158 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "%s: unknown Op %x\n", printk 4177 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: cmd:%x %p\n", printk 4207 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: dev(%d) close from %p\n", printk 4219 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: unknown command %x\n", printk 4252 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: entered\n", __func__); printk 4262 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n", printk 4277 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: IRQ %d count %d\n", printk 4298 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: IRQ %d count %d\n", printk 4302 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: done\n", __func__); printk 4307 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "ignoring missing interrupts\n"); printk 4311 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n", printk 4325 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq); printk 4332 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err); printk 4346 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 4363 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n"); printk 4367 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n"); printk 4395 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 4403 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 4409 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 4416 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 4424 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-multi: failed to remap io " printk 4430 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 4446 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 4454 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 4460 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ " printk 4474 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING printk 4481 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-multi: failed to request " printk 4488 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 4495 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); printk 4523 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: entered for port %d\n", printk 4527 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "%s: ERROR port out of range (%d).\n", printk 4533 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: releasing port=%d\n", printk 4565 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4587 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4601 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4618 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: free port %d channel D(%d)\n", __func__, printk 4624 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: done!\n", __func__); printk 4634 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: release card (%d) entered\n", printk 4648 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: free irq %d (hc=%p)\n", printk 4657 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: disable all channels (d and b)\n", printk 4672 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: remove instance from list\n", printk 4677 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: delete instance\n", __func__); printk 4682 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: card successfully removed\n", printk 4692 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 4697 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4710 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT set " printk 4719 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT set " printk 4728 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4738 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4748 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT turn on CRC4 report:" printk 4755 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT turn off CRC4" printk 4762 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT force getting clock from " printk 4769 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT force putting clock to " printk 4777 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: PORT disable JATT PLL on " printk 4786 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4824 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "%s: no memory for bchannel\n", printk 4831 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "%s: no memory for coeffs\n", printk 4897 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "%s: no memory for bchannel\n", printk 4904 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "%s: no memory for coeffs\n", printk 4926 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4931 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "Error: Master clock " printk 4939 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "Error: Master clock " printk 4951 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4961 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 4999 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "too many cards (max=%d).\n", printk 5004 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but " printk 5008 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "HFC-MULTI: Load module without parameters " printk 5013 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n", printk 5020 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "No kmem for HFC-Multi card\n"); printk 5041 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 5048 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO printk 5070 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "HFCMULTI error: silence_data too small, " printk 5103 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_NOTICE "Watchdog enabled\n"); printk 5114 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_WARNING "Embedded IO Mode not selected\n"); printk 5138 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "too many ports (max=%d).\n", printk 5148 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG printk 5191 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n", printk 5213 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "%s: %s DIPs(0x%x)\n", printk 5222 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "%s: %s DIPs(0x%x)\n", printk 5240 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "init card returns %d\n", ret_err); printk 5265 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "removing hfc_multi card vendor:%x " printk 5276 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: drvdata already removed\n", printk 5437 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR printk 5442 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR printk 5450 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "%d devices registered\n", HFC_cnt); printk 5479 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION); printk 5482 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__); printk 5489 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_DEBUG "%s: init entered\n", __func__); printk 5515 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR printk 5547 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "error registering embedded driver: " printk 5552 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_INFO "%d devices registered\n", HFC_cnt); printk 5558 drivers/isdn/hardware/mISDN/hfcmulti.c printk(KERN_ERR "error registering pci driver: %x\n", err); printk 197 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "reset_hfcpci: entered\n"); printk 199 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO "HFC_PCI: resetting HFC ChipId(%x)\n", val); printk 207 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "HFC-PCI status(%x) before reset\n", val); printk 215 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "HFC-PCI status(%x) after reset\n", val); printk 223 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "HFC-PCI status(%x) after %dus\n", val, cnt); printk 367 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_clear_fifo_tx%d f1(%x) f2(%x) " printk 381 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 400 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_empty_fifo\n"); printk 409 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_empty_fifo: incoming packet " printk 419 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "HFCPCI: receive out of memory\n"); printk 469 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 479 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 495 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING printk 622 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci rec ch(%x) f1(%d) f2(%d)\n", printk 631 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 671 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s\n", __func__); printk 681 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s:f1(%d) f2(%d) z1(f1)(%x)\n", __func__, printk 689 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 703 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_fill_Dfifo count(%d/%d)\n", printk 707 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_fill_Dfifo no fifo mem\n"); printk 750 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s\n", __func__); printk 771 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_fill_fifo_trans ch(%x) " printk 789 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_FFt fillempty " printk 825 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_FFt fcnt(%d) " printk 848 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 857 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 868 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_fill_fifo ch(%x) count(%d/%d)\n", printk 873 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci_fill_fifo no fifo mem\n"); printk 912 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: TE newstate %x\n", printk 960 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: NT newstate %x\n", printk 1106 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: unknown command %x\n", printk 1157 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 1167 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "HFC-PCI irq %x\n", val); printk 1172 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "ph_state chg %d->%d\n", printk 1191 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci spurious 0x08 IRQ\n"); printk 1198 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci spurious 0x10 IRQ\n"); printk 1205 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci spurious 0x01 IRQ\n"); printk 1212 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "hfcpci spurious 0x02 IRQ\n"); printk 1244 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 1252 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING printk 1259 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "%s: no pcm channel id but HFC_CFG_PCM\n", printk 1379 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "prot not known %x\n", protocol); printk 1399 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B2_SSL 0x%x\n", printk 1401 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B2_RSL 0x%x\n", printk 1408 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B1_SSL 0x%x\n", printk 1410 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B1_RSL 0x%x\n", printk 1435 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 1439 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG printk 1490 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "prot not known %x\n", protocol); printk 1533 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: cmd:%x %p\n", __func__, cmd, arg); printk 1563 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "%s: unknown prim(%x)\n", printk 1705 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "inithfcpci: entered\n"); printk 1719 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "init_card: entered\n"); printk 1726 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING printk 1744 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO "HFC PCI: IRQ %d count %d\n", printk 1753 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING printk 1796 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B1_SSL/RSL 0x%x\n", printk 1808 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B2_SSL/RSL 0x%x\n", printk 1838 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B1_SSL/RSL 0x%x\n", printk 1846 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: Write_hfc: B2_SSL/RSL 0x%x\n", printk 1864 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "%s: unknown Op %x\n", printk 1879 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__, printk 1920 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "%s:cannot get module\n", __func__); printk 1939 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "%s:cannot get module\n", __func__); printk 1956 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: cmd:%x %p\n", printk 1969 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: dev(%d) close from %p\n", printk 1979 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: unknown command %x\n", printk 1991 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO "mISDN: HFC-PCI driver %s\n", hfcpci_revision); printk 1996 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n"); printk 2003 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n"); printk 2012 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING printk 2020 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_WARNING printk 2027 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO printk 2109 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO "HFC %d cards installed\n", HFC_cnt); printk 2218 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_ERR "No kmem for HFC card\n"); printk 2229 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO "mISDN_hfcpci: found adapter %s at %s\n", printk 2249 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_DEBUG "%s: drvdata already removed\n", printk 2315 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_ERR "%s: Wrong poll value %d not in range " printk 2322 drivers/isdn/hardware/mISDN/hfcpci.c printk(KERN_INFO "%s: Using alternative poll value of %d\n", printk 56 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 81 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s reg(0x%02x) val(0x%02x)\n", printk 108 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 184 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s reg(0x%02x) val(x%02x)\n", printk 205 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 213 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s PH_DATA_REQ ret(%i)\n", printk 285 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: PH_DATA_REQ\n", printk 299 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: PH_ACTIVATE_REQ %s\n", printk 323 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: PH_DEACTIVATE_REQ\n", printk 368 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s cmd 0x%x\n", printk 403 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: unknown cmd %x\n", printk 418 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: dev(%d) open addr(%i) from %p\n", printk 460 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_WARNING "%s: %s: cannot get module\n", printk 476 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s B%i\n", printk 486 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_WARNING "%s: %s:cannot get module\n", printk 497 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s op(0x%x) channel(0x%x)\n", printk 506 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_WARNING "%s: %s: unknown Op %x\n", printk 527 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: cmd:%x %p\n", printk 543 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 560 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: unknown command %x\n", printk 577 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: %s\n", hw->name, __func__, printk 580 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: TE F%d\n", printk 618 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: %s\n", printk 623 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_INFO DRIVER_NAME "%s: %s: NT G%d\n", printk 687 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: protocol %x-->%x B%d\n", printk 718 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: prot not known %x\n", printk 758 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: %x\n", printk 813 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: fifo(%i) len(%i) " printk 822 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: undefined channel\n", printk 868 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: No mem for rx_skb\n", printk 876 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: sbk mem exceeded " printk 893 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: fifon(%i)" printk 899 drivers/isdn/hardware/mISDN/hfcsusb.c printk("%02x ", printk 901 drivers/isdn/hardware/mISDN/hfcsusb.c printk("\n"); printk 917 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 923 drivers/isdn/hardware/mISDN/hfcsusb.c printk("%02x ", printk 925 drivers/isdn/hardware/mISDN/hfcsusb.c printk("\n"); printk 991 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: with -EXDEV " printk 1011 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: " printk 1019 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1025 drivers/isdn/hardware/mISDN/hfcsusb.c printk("%x ", buf[i]); printk 1026 drivers/isdn/hardware/mISDN/hfcsusb.c printk("\n"); printk 1068 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: error submitting " printk 1074 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: rx_iso_complete : " printk 1103 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1116 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: D RX INT len(%d) ", printk 1119 drivers/isdn/hardware/mISDN/hfcsusb.c printk("%02x ", buf[i]); printk 1120 drivers/isdn/hardware/mISDN/hfcsusb.c printk("\n"); printk 1148 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: error resubmitting USB\n", printk 1188 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: neither BCH nor DCH\n", printk 1205 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: " printk 1236 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: " printk 1292 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1303 drivers/isdn/hardware/mISDN/hfcsusb.c printk("%x ", printk 1306 drivers/isdn/hardware/mISDN/hfcsusb.c printk(" skb->len(%i) tx-idx(%d)\n", printk 1324 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: " printk 1330 drivers/isdn/hardware/mISDN/hfcsusb.c printk("%02x ", printk 1332 drivers/isdn/hardware/mISDN/hfcsusb.c printk("\n"); printk 1347 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1365 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: urb->status %s (%i)" printk 1385 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: fifo %i\n", printk 1394 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1425 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1436 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: %s URB nr:%d\n", printk 1454 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s for fifo %i.%i\n", printk 1465 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: ERROR %s for fifo %i.%i\n", printk 1479 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s for fifo %i\n", printk 1488 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: ERROR %s for fifo %i\n", printk 1500 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: INT IN fifo:%d\n", printk 1515 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: submit URB: status:%i\n", printk 1525 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s %s\n", hw->name, __func__, printk 1550 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 1701 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 1713 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: cannot read chip id\n", printk 1718 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: Invalid chip id 0x%02x\n", printk 1747 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 1787 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s: bch->nr(%i)\n", printk 1807 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: cmd:%x %p\n", __func__, cmd, arg); printk 1828 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_WARNING "%s: unknown prim(%x)\n", printk 1841 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); printk 1887 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_INFO "%s: registered as '%s'\n", printk 1933 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_DEBUG printk 1939 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_WARNING printk 2125 drivers/isdn/hardware/mISDN/hfcsusb.c printk(KERN_INFO "%s: device disconnected\n", hw->name); printk 1087 drivers/isdn/hardware/mISDN/netjet.c printk(KERN_INFO "nj_probe(mISDN): found adapter at %s\n", printk 1357 drivers/isdn/hardware/mISDN/w6692.c printk(KERN_INFO "mISDN_w6692: found adapter %s at %s\n", printk 68 drivers/isdn/mISDN/clock.c printk(KERN_DEBUG "Old clock source '%s' disable.\n", printk 75 drivers/isdn/mISDN/clock.c printk(KERN_DEBUG "New clock source '%s' enable.\n", printk 93 drivers/isdn/mISDN/clock.c printk(KERN_DEBUG "%s: %s %d\n", __func__, name, pri); printk 96 drivers/isdn/mISDN/clock.c printk(KERN_ERR "%s: No memory for clock entry.\n", __func__); printk 117 drivers/isdn/mISDN/clock.c printk(KERN_DEBUG "%s: %s %d\n", __func__, iclock->name, printk 122 drivers/isdn/mISDN/clock.c printk(KERN_DEBUG printk 142 drivers/isdn/mISDN/clock.c printk(KERN_ERR "%s: '%s' sends us clock updates, but we do " printk 172 drivers/isdn/mISDN/clock.c printk("Received first clock from source '%s'.\n", printk 234 drivers/isdn/mISDN/core.c printk(KERN_DEBUG "mISDN_register %s %d\n", printk 262 drivers/isdn/mISDN/core.c printk(KERN_DEBUG "mISDN_unregister %s %d\n", printk 308 drivers/isdn/mISDN/core.c printk(KERN_WARNING "%s id not in range %d\n", printk 323 drivers/isdn/mISDN/core.c printk(KERN_DEBUG "%s: %s/%x\n", __func__, printk 327 drivers/isdn/mISDN/core.c printk(KERN_WARNING printk 345 drivers/isdn/mISDN/core.c printk(KERN_DEBUG "%s: %s/%x\n", __func__, bp->name, printk 374 drivers/isdn/mISDN/core.c printk(KERN_INFO "Modular ISDN core version %d.%d.%d\n", printk 415 drivers/isdn/mISDN/core.c printk(KERN_DEBUG "mISDNcore unloaded\n"); printk 513 drivers/isdn/mISDN/dsp_blowfish.c printk(KERN_DEBUG printk 165 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "-----Current DSP\n"); printk 167 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "* %s hardecho=%d softecho=%d txmix=%d", printk 171 drivers/isdn/mISDN/dsp_cmx.c printk(" (Conf %d)", odsp->conf->id); printk 173 drivers/isdn/mISDN/dsp_cmx.c printk(" *this*"); printk 174 drivers/isdn/mISDN/dsp_cmx.c printk("\n"); printk 176 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "-----Current Conf:\n"); printk 178 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "* Conf %d (%p)\n", conf->id, conf); printk 180 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 191 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "-----end\n"); printk 203 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: conference ID is 0.\n", __func__); printk 225 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: conf or dsp is 0.\n", __func__); printk 229 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: dsp is already member in a conf.\n", printk 235 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: dsp is already in a conf.\n", printk 242 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_ERR "kzalloc struct dsp_conf_member failed\n"); printk 270 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: dsp is 0.\n", printk 276 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: dsp is not in a conf.\n", printk 282 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: dsp has linked an empty conf.\n", printk 297 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING printk 314 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: id is 0.\n", printk 321 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_ERR "kzalloc struct dsp_conf failed\n"); printk 340 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: conf is null.\n", printk 346 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_WARNING "%s: conf not empty.\n", printk 399 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s checking dsp %s\n", printk 405 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 420 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s removing %s from" printk 449 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 481 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 494 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 505 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s checking conference %d\n", printk 509 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_ERR "%s: conference without members\n", printk 521 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 531 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 547 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s removing " printk 571 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 580 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 589 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 597 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 606 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 614 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 623 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s dsp %s cannot form a " printk 631 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 640 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 667 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 693 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 704 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 735 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 775 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 793 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 829 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 867 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 883 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 902 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 931 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 997 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1004 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1047 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1077 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "removing us from conference %d\n", printk 1092 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1109 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "searching conference %d\n", printk 1114 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1125 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1131 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1145 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1173 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "DELAY (%s) %3d >%s\n", dsp->name, delay, printk 1195 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_ERR printk 1235 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1262 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1281 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1341 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1356 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_ERR printk 1409 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s\n", debugbuf); printk 1415 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s\n", debugbuf); printk 1430 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s: RX empty\n", printk 1591 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_ERR printk 1783 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1814 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1880 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s: TX overflow space=%d skb->len=" printk 1889 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG printk 1907 drivers/isdn/mISDN/dsp_cmx.c printk(KERN_DEBUG "%s\n", debugbuf); printk 218 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: no peer, no rx_off\n", printk 225 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", printk 231 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: %s set rx_off = %d\n", printk 263 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: no peer, no fill_empty\n", printk 271 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", printk 276 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: %s set fill_empty = 1\n", printk 290 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__); printk 304 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: start dtmf\n", __func__); printk 307 drivers/isdn/mISDN/dsp_core.c printk(KERN_NOTICE "changing DTMF Threshold " printk 321 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: stop dtmf\n", __func__); printk 334 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: join conference %d\n", printk 345 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: release conference\n", __func__); printk 362 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: turn tone 0x%x on\n", printk 378 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: turn tone off\n", __func__); printk 398 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: change tx vol to %d\n", printk 415 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: change rx vol to %d\n", printk 424 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__); printk 434 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__); printk 442 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: enable receive to user " printk 449 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: disable receive to " printk 460 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: enable mixing of " printk 474 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: disable mixing of " printk 485 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: enable tx-data\n", __func__); printk 494 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: disable tx-data\n", __func__); printk 517 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: use delay algorithm to " printk 529 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: use jitter algorithm to " printk 539 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: use dejitter on TX " printk 549 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: use TX buffer without " printk 558 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: pipeline config string " printk 580 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: turn blowfish on (key " printk 610 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: turn blowfish off\n", __func__); printk 618 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: ctrl req %x unhandled\n", printk 633 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: no peer, no features\n", printk 640 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", printk 654 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", printk 659 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: features not supported for %s\n", printk 693 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: rx-data during rx_off" printk 743 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: digit" printk 771 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: PH_CONTROL INDICATION " printk 778 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: ignoring DTMF " printk 789 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: digit" printk 815 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: change tx volume to " printk 824 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: ctrl ind %x unhandled " printk 832 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: b_channel is now active %s\n", printk 848 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: done with activation, sending " printk 859 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: b_channel is now inactive %s\n", printk 907 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: activating b_channel %s\n", printk 923 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: releasing b_channel %s\n", printk 942 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: msg %x unhandled %s\n", printk 959 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd); printk 981 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: releasing member %s\n", printk 989 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: remove & destroy object %s\n", printk 995 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: dsp instance released\n", printk 1019 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: fifo full %s, this is " printk 1058 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__); printk 1062 drivers/isdn/mISDN/dsp_core.c printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__); printk 1079 drivers/isdn/mISDN/dsp_core.c printk(KERN_WARNING "%s:cannot get module\n", printk 1121 drivers/isdn/mISDN/dsp_core.c printk(KERN_INFO "DSP module %s\n", mISDN_dsp_revision); printk 1130 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "%s: Wrong poll value (%d), use %d " printk 1136 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "%s: Wrong poll value (%d), use 8 " printk 1143 drivers/isdn/mISDN/dsp_core.c printk(KERN_INFO "mISDN_dsp: Cannot clock every %d " printk 1163 drivers/isdn/mISDN/dsp_core.c printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel " printk 1170 drivers/isdn/mISDN/dsp_core.c printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals " printk 1191 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, " printk 1198 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err); printk 1219 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not " printk 1223 drivers/isdn/mISDN/dsp_core.c printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not " printk 63 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, " printk 70 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, " printk 78 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, " printk 86 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, " printk 152 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_ERR "%s: coefficients have invalid " printk 163 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_WARNING printk 198 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_WARNING "DTMF-Detection overflow\n"); printk 230 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG printk 234 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "a %3d %3d %3d %3d %3d %3d %3d %3d" printk 285 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "DTMF what: %c\n", what); printk 296 drivers/isdn/mISDN/dsp_dtmf.c printk(KERN_DEBUG "DTMF digit: %c\n", printk 41 drivers/isdn/mISDN/dsp_hwec.c printk(KERN_ERR "%s: failed to enable hwec: dsp is NULL\n", printk 80 drivers/isdn/mISDN/dsp_hwec.c printk(KERN_DEBUG "%s: enabling hwec with deftaps=%d\n", printk 86 drivers/isdn/mISDN/dsp_hwec.c printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", printk 97 drivers/isdn/mISDN/dsp_hwec.c printk(KERN_ERR "%s: failed to disable hwec: dsp is NULL\n", printk 102 drivers/isdn/mISDN/dsp_hwec.c printk(KERN_DEBUG "%s: disabling hwec\n", __func__); printk 106 drivers/isdn/mISDN/dsp_hwec.c printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", printk 91 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_ERR "%s: failed to register %s\n", printk 101 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_ERR "%s: failed to create device file\n", printk 108 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: %s registered\n", __func__, elem->name); printk 133 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: %s unregistered\n", printk 138 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_ERR "%s: element %s not in list.\n", __func__, elem->name); printk 149 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: dsp pipeline module initialized\n", __func__); printk 167 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_WARNING "%s: element was still registered: %s\n", printk 173 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: dsp pipeline module exited\n", __func__); printk 185 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: dsp pipeline ready\n", __func__); printk 215 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: dsp pipeline destroyed\n", __func__); printk 251 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_ERR "%s: failed to add " printk 272 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: created " printk 279 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_ERR "%s: failed " printk 294 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_ERR "%s: element not found, skipping: " printk 307 drivers/isdn/mISDN/dsp_pipeline.c printk(KERN_DEBUG "%s: dsp pipeline built%s: %s\n", printk 406 drivers/isdn/mISDN/dsp_tones.c printk(KERN_DEBUG "%s: reaching next sequence " printk 525 drivers/isdn/mISDN/dsp_tones.c printk(KERN_WARNING "dsp: given tone 0x%x is invalid\n", tone); printk 529 drivers/isdn/mISDN/dsp_tones.c printk(KERN_DEBUG "%s: now starting tone %d (index=%d)\n", printk 36 drivers/isdn/mISDN/fsm.c printk(KERN_ERR printk 61 drivers/isdn/mISDN/fsm.c printk(KERN_ERR printk 143 drivers/isdn/mISDN/fsm.c printk(KERN_WARNING printk 270 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING printk 295 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "B-channel %p receive queue overflow, " printk 314 drivers/isdn/mISDN/hwchannel.c printk(KERN_ERR "%s: no skb id %x\n", __func__, printk 343 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "B-channel %p receive queue overflow, " printk 351 drivers/isdn/mISDN/hwchannel.c printk(KERN_ERR "%s: no skb id %x\n", __func__, printk 374 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "B TX_NEXT without skb\n"); printk 408 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "%s: skb too small\n", __func__); printk 412 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "%s: skb too large(%d/%d)\n", printk 435 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "%s: skb too small\n", __func__); printk 439 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING "%s: skb too large(%d/%d)\n", printk 446 drivers/isdn/mISDN/hwchannel.c printk(KERN_WARNING printk 272 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: sending data to socket (len = %d)\n", printk 284 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: resetting timer\n", __func__); printk 289 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: dropping frame, because remote " printk 334 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: sending packet to socket (len " printk 361 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: received empty keepalive data, " printk 367 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: received data, sending to mISDN (%d)\n", printk 371 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - channel %d out of " printk 378 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - channel %d not in " printk 386 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: No mem for skb.\n", __func__); printk 455 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n", printk 460 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - length %d below " printk 467 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - unknown version %d\n", printk 474 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - received E1 packet " printk 479 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - received S0 packet " printk 490 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - remotecodec %d " printk 500 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - packet has id " printk 505 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - packet too " printk 516 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - ID mismatch, " printk 523 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - packet has no " printk 531 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - packet too short, " printk 546 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - packet too " printk 557 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - length %d at " printk 563 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - length %d at " printk 573 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: packet error - packet too short, time " printk 587 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: interface become active due to " printk 614 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: remote address changes from " printk 647 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: Failed to alloc recvbuf.\n", __func__); printk 660 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: Failed to create socket.\n", __func__); printk 678 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: Failed to bind socket to port %d.\n", printk 686 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: socket->sk == NULL\n", __func__); printk 704 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: socket created and open\n", printk 713 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING printk 730 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: socket thread terminating\n", printk 746 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: socket thread terminated\n", printk 759 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: socket thread exists, " printk 768 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: interface become deactivated " printk 789 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: Failed (%d) to create socket process.\n", printk 796 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: socket thread created\n", __func__); printk 808 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: keepalive timer expired, sending empty " printk 835 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: timeout timer expired, turn layer one " printk 843 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: interface become deactivated " printk 853 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: on demand causes ip address to " printk 877 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: skb too small\n", printk 882 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: skb too large\n", printk 905 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: PH_ACTIVATE channel %d (1..%d)\n" printk 915 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: PH_DEACTIVATE channel %d " printk 948 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: got new ip address from user " printk 954 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: removing ip address.\n", printk 961 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: getting ip address.\n", printk 967 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: unknown Op %x\n", printk 979 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__, printk 986 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: change protocol %x to %x\n", printk 998 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s:cannot get module\n", __func__); printk 1015 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s:internal error ch %d has no bch\n", printk 1024 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s:cannot get module\n", __func__); printk 1038 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: cmd:%x %p\n", printk 1066 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: dev(%d) close from %p\n", printk 1076 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: unknown command %x\n", printk 1096 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: skb too small\n", printk 1101 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: skb too large\n", printk 1109 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: got AIS, not sending, " printk 1120 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: got silence, not sending" printk 1148 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: PH_ACTIVATE channel %d (1..%d)\n" printk 1157 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: PH_DEACTIVATE channel %d " printk 1183 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: HW_FEATURE request\n", printk 1190 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: unknown Op %x\n", printk 1205 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: cmd:%x %p\n", printk 1220 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "%s: unknown prim(%x)\n", printk 1310 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "Codec(%d) not supported.\n", printk 1316 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: using codec %d\n", printk 1320 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "Warning: No 'id' value given or " printk 1326 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: using id 0x%x\n", __func__, hc->id); printk 1330 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: ondemand option only allowed in " printk 1338 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "Maximum limit for BRI interface is 2 " printk 1343 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "Maximum limit for PRI interface is 126 " printk 1348 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "Maximum limit for BRI interface is 30 " printk 1350 drivers/isdn/mISDN/l1oip_core.c printk(KERN_WARNING "Your selection of %d channels must be " printk 1364 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: using local port %d remote ip " printk 1394 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "%s: no memory for bchannel\n", printk 1417 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: Setting up network card(%d)\n", printk 1440 drivers/isdn/mISDN/l1oip_core.c printk(KERN_INFO "mISDN: Layer-1-over-IP driver Rev. %s\n", printk 1469 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "Card type(%d) not supported.\n", printk 1476 drivers/isdn/mISDN/l1oip_core.c printk(KERN_DEBUG "%s: interface %d is %s with %s.\n", printk 1483 drivers/isdn/mISDN/l1oip_core.c printk(KERN_ERR "No kmem for L1-over-IP driver.\n"); printk 1501 drivers/isdn/mISDN/l1oip_core.c printk(KERN_INFO "%d virtual devices registered\n", l1oip_cnt); printk 103 drivers/isdn/mISDN/layer1.c printk(KERN_DEBUG "%s: %pV\n", dev_name(&l1->dch->dev.dev), &vaf); printk 365 drivers/isdn/mISDN/layer1.c printk(KERN_DEBUG "%s %x unhandled\n", printk 379 drivers/isdn/mISDN/layer1.c printk(KERN_ERR "kmalloc struct layer1 failed\n"); printk 104 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s l2 (sapi %d tei %d): %pV\n", printk 148 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: dev %s err=%d\n", __func__, printk 173 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: dev %s err=%d\n", __func__, printk 185 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "l2down_skb: dev %s ret(%d)\n", printk 286 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: L2(%d,%d) nr:%x timer %s no skb\n", printk 295 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: L2(%d,%d) nr:%x timer %s expired\n", printk 306 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "l2mgr: dev %s addr:%x prim %x %c\n", printk 365 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING printk 629 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: can't alloc skbuff in %s\n", printk 1114 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: isdnl2 can't alloc sbbuff in %s\n", printk 1173 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING printk 1487 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: no headroom(%d) copy for IFrame\n", printk 1501 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s: l2 try overwrite ack queue entry %d\n", printk 1873 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING printk 1883 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n", printk 1892 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: tei %d/%d mismatch\n", printk 1934 drivers/isdn/mISDN/layer2.c printk(KERN_WARNING "%s:l2 D-channel frame error %c\n", printk 1949 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: %s prim(%x) id(%x) sapi(%d) tei(%d)\n", printk 1957 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: prim(%x) id(%x) internal msg\n", printk 2039 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: cmd(%x) in %s\n", printk 2053 drivers/isdn/mISDN/layer2.c printk(KERN_NOTICE "%s: MDL_ERROR|REQ (tei_l2)\n", printk 2086 drivers/isdn/mISDN/layer2.c printk(KERN_DEBUG "%s: %s cmd(%x)\n", printk 2116 drivers/isdn/mISDN/layer2.c printk(KERN_ERR "kzalloc layer2 failed\n"); printk 2187 drivers/isdn/mISDN/layer2.c printk(KERN_ERR "layer2 create failed prt %x\n", printk 68 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s len %d %p\n", __func__, skb->len, skb); printk 74 drivers/isdn/mISDN/socket.c printk(KERN_WARNING "%s: error %d\n", __func__, err); printk 85 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s(%p, %x, %p)\n", __func__, ch, cmd, arg); printk 115 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s: len %d, flags %x ch.nr %d, proto %x\n", printk 174 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s: len %d flags %x ch %d proto %x\n", printk 215 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s: ID:%x\n", printk 241 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk); printk 410 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock, printk 473 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk); printk 622 drivers/isdn/mISDN/socket.c printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk); printk 819 drivers/isdn/mISDN/socket.c printk(KERN_ERR "%s: error(%d)\n", __func__, err); printk 26 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s prim(%x) id(%x) %p\n", printk 71 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s no skb\n", __func__); printk 104 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG printk 112 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s ch%d addr %x no mem\n", printk 130 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG printk 148 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s prim(%x) id(%x) %p\n", printk 166 drivers/isdn/mISDN/stack.c printk(KERN_WARNING printk 176 drivers/isdn/mISDN/stack.c printk(KERN_WARNING printk 182 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: dev(%s) prim %x not delivered\n", printk 204 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "mISDNStackd %s started\n", printk 238 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG printk 283 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: %s wake status %08lx\n", printk 297 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "mISDNStackd daemon for %s proceed %d " printk 302 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG printk 305 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG printk 308 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "mISDNStackd daemon for %s killed now\n", printk 371 drivers/isdn/mISDN/stack.c printk(KERN_ERR "kmalloc mISDN_stack failed\n"); printk 384 drivers/isdn/mISDN/stack.c printk(KERN_ERR "kmalloc teimanager failed\n"); printk 399 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: st(%s)\n", __func__, printk 406 drivers/isdn/mISDN/stack.c printk(KERN_ERR printk 426 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n", printk 440 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: ret %d (dev %d)\n", __func__, err, printk 463 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n", printk 519 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n", printk 538 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: ret 1 %d\n", __func__, err); printk 545 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: ret 2 %d\n", __func__, err); printk 568 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: no stack\n", __func__); printk 572 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: st(%s) protocol(%x)\n", __func__, printk 601 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: no l2 channel\n", printk 609 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: no l2 channel\n", printk 625 drivers/isdn/mISDN/stack.c printk(KERN_DEBUG "%s: st(%s)\n", __func__, printk 631 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: notifier in use\n", printk 642 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: layer2 list not empty\n", printk 645 drivers/isdn/mISDN/stack.c printk(KERN_WARNING "%s: layer1 list not empty\n", printk 84 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "mgr(%d): %pV\n", mgr->ch.st->dev->id, &vaf); printk 233 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "sapi(%d) tei(%d): %pV\n", printk 250 drivers/isdn/mISDN/tei.c printk(KERN_WARNING printk 260 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s: more as 63 layer2 for one device\n", printk 287 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s: more as 63 dynamic tei for one device\n", printk 309 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s: err=%d\n", __func__, err); printk 449 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s: no skb for tei msg\n", __func__); printk 803 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s:no memory for layer2\n", __func__); printk 809 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s:no memory for teimgr\n", __func__); printk 827 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s:no free id\n", __func__); printk 839 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s: cannot open L1\n", __func__); printk 864 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s:No free tei\n", __func__); printk 886 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: short mgr frame %d/8\n", printk 941 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: cmd(%x)\n", __func__, cmd); printk 992 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n", printk 1008 drivers/isdn/mISDN/tei.c printk(KERN_WARNING printk 1052 drivers/isdn/mISDN/tei.c printk(KERN_ERR "kmalloc teimgr failed\n"); printk 1104 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: prim(%x) id(%x)\n", printk 1204 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: prim(%x) id(%x)\n", printk 1224 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: SABME sapi(%d) tei(%d)\n", printk 1229 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s: failed to create new tei\n", printk 1265 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG "%s(%x, %p)\n", __func__, cmd, arg); printk 1315 drivers/isdn/mISDN/tei.c printk(KERN_DEBUG printk 1323 drivers/isdn/mISDN/tei.c printk(KERN_WARNING "%s ch%d addr %x no mem\n", printk 49 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s(%p,%p)\n", __func__, ino, filep); printk 71 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s(%p,%p)\n", __func__, ino, filep); printk 101 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s(%p, %p, %d, %p)\n", __func__, printk 142 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s(%p, %p)\n", __func__, filep, wait); printk 149 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s work(%d) empty(%d)\n", __func__, printk 224 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s(%p, %x, %lx)\n", __func__, printk 235 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s add %d id %d\n", __func__, printk 250 drivers/isdn/mISDN/timerdev.c printk(KERN_DEBUG "%s del id %d\n", __func__, id); printk 286 drivers/isdn/mISDN/timerdev.c printk(KERN_WARNING "mISDN: Could not register timer device\n"); printk 116 drivers/macintosh/adb-iop.c printk("adb_iop_listen %p: rcvd packet, %d bytes: %02X %02X", req, printk 119 drivers/macintosh/adb-iop.c printk(" %02X", (uint)amsg->data[i]); printk 120 drivers/macintosh/adb-iop.c printk("\n"); printk 178 drivers/macintosh/adb-iop.c printk("adb_iop_start %p: sending packet, %d bytes:", req, req->nbytes); printk 180 drivers/macintosh/adb-iop.c printk(" %02X", (uint)req->data[i]); printk 181 drivers/macintosh/adb-iop.c printk("\n"); printk 117 drivers/macintosh/adb.c printk("adb reply (%d)", req->reply_len); printk 119 drivers/macintosh/adb.c printk(" %x", req->reply[i]); printk 120 drivers/macintosh/adb.c printk("\n"); printk 212 drivers/macintosh/adb.c printk(KERN_DEBUG "adb device [%d]: %d 0x%X\n", i, printk 981 drivers/macintosh/adbhid.c printk(KERN_DEBUG "ADB keyboard at %d has handler 0x%X\n", printk 1079 drivers/macintosh/adbhid.c printk(KERN_DEBUG "ADB mouse (%s) at %d has handler 0x%X\n", printk 99 drivers/macintosh/ams/ams-core.c printk(KERN_INFO "ams: freefall detected!\n"); printk 106 drivers/macintosh/ams/ams-core.c printk(KERN_INFO "ams: shock detected!\n"); printk 171 drivers/macintosh/ams/ams-i2c.c printk(KERN_INFO "ams: Failed to reset the device\n"); printk 176 drivers/macintosh/ams/ams-i2c.c printk(KERN_INFO "ams: Failed to start the device\n"); printk 190 drivers/macintosh/ams/ams-i2c.c printk(KERN_INFO "ams: Incorrect device version (%d.%d)\n", printk 200 drivers/macintosh/ams/ams-i2c.c printk(KERN_INFO "ams: Incorrect firmware version (%d.%d)\n", printk 228 drivers/macintosh/ams/ams-i2c.c printk(KERN_INFO "ams: Found I2C based motion sensor\n"); printk 244 drivers/macintosh/ams/ams-i2c.c printk(KERN_INFO "ams: Unloading\n"); printk 142 drivers/macintosh/ams/ams-pmu.c printk(KERN_INFO "ams: Unloading\n"); printk 194 drivers/macintosh/ams/ams-pmu.c printk(KERN_INFO "ams: Found PMU based motion sensor\n"); printk 37 drivers/macintosh/ans-lcd.c printk(KERN_DEBUG "LCD: CTRL byte: %02x\n",c); printk 64 drivers/macintosh/ans-lcd.c printk(KERN_DEBUG "LCD: write\n"); printk 89 drivers/macintosh/ans-lcd.c printk(KERN_DEBUG "LCD: ioctl(%d,%d)\n",cmd,arg); printk 173 drivers/macintosh/ans-lcd.c printk(KERN_INFO "LCD: misc_register failed\n"); printk 179 drivers/macintosh/ans-lcd.c printk(KERN_DEBUG "LCD: init\n"); printk 90 drivers/macintosh/apm_emu.c printk(KERN_INFO "apm_emu: PMU APM Emulation initialized.\n"); printk 100 drivers/macintosh/apm_emu.c printk(KERN_INFO "apm_emu: PMU APM Emulation removed.\n"); printk 114 drivers/macintosh/mac_hid.c printk(KERN_ERR printk 122 drivers/macintosh/mac_hid.c printk(KERN_ERR printk 120 drivers/macintosh/macio-adb.c printk(KERN_ERR "ADB: can't get irq %d\n", irq); printk 125 drivers/macintosh/macio-adb.c printk("adb: mac-io driver 1.0 for unified ADB\n"); printk 263 drivers/macintosh/macio_asic.c printk(KERN_INFO "macio: fixed SCC irqs on gatwick\n"); printk 269 drivers/macintosh/macio_asic.c printk(KERN_INFO "macio: fixed media-bay irq on gatwick\n"); printk 276 drivers/macintosh/macio_asic.c printk(KERN_INFO "macio: fixed left floppy irqs\n"); printk 281 drivers/macintosh/macio_asic.c printk(KERN_INFO "macio: fixed left ide irqs\n"); printk 336 drivers/macintosh/macio_asic.c printk(KERN_WARNING "Can't request resource " printk 397 drivers/macintosh/macio_asic.c printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", printk 426 drivers/macintosh/macio_asic.c printk(KERN_DEBUG"macio: device registration error for %s!\n", printk 610 drivers/macintosh/macio_asic.c printk (KERN_WARNING "MacIO: Unable to reserve resource #%d:%lx@%lx" printk 716 drivers/macintosh/macio_asic.c printk(KERN_INFO "MacIO PCI driver attached to %s chipset\n", printk 383 drivers/macintosh/mediabay.c printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index); printk 385 drivers/macintosh/mediabay.c printk(KERN_INFO "mediabay%d: Bay contains %s\n", printk 594 drivers/macintosh/mediabay.c printk(KERN_INFO "mediabay%d: Registered %s media-bay\n", i, bay->ops->name); printk 647 drivers/macintosh/mediabay.c printk("mediabay%d: Content changed during sleep...\n", bay->index); printk 305 drivers/macintosh/rack-meter.c printk(KERN_INFO "RackMeter initialized\n"); printk 342 drivers/macintosh/rack-meter.c printk(KERN_WARNING "rackmeter: Incorrect DMA mark 0x%08x\n", printk 346 drivers/macintosh/rack-meter.c printk(KERN_ERR "rackmeter: Too many errors," printk 401 drivers/macintosh/rack-meter.c printk(KERN_ERR "rackmeter: failed to allocate memory !\n"); printk 412 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 420 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 432 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 446 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 456 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 467 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 478 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 486 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 494 drivers/macintosh/rack-meter.c printk(KERN_ERR printk 57 drivers/macintosh/smu.c #define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0) printk 209 drivers/macintosh/smu.c printk(KERN_WARNING "SMU: reply buffer too small," printk 251 drivers/macintosh/smu.c printk(KERN_INFO "SMU: message interrupt !\n"); printk 481 drivers/macintosh/smu.c printk(KERN_INFO "SMU: Driver %s %s\n", VERSION, AUTHOR); printk 489 drivers/macintosh/smu.c printk(KERN_ERR "SMU: Command buffer allocation failed !\n"); printk 514 drivers/macintosh/smu.c printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n"); printk 520 drivers/macintosh/smu.c printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n"); printk 555 drivers/macintosh/smu.c printk(KERN_ERR "SMU: Can't map doorbell buffer pointer !\n"); printk 563 drivers/macintosh/smu.c printk(KERN_INFO "SMU: using NAP mode workaround\n"); printk 591 drivers/macintosh/smu.c printk(KERN_ERR "smu: failed to map irq for node %pOF\n", printk 597 drivers/macintosh/smu.c printk(KERN_ERR "smu: failed to map irq for node %pOF\n", printk 608 drivers/macintosh/smu.c printk(KERN_WARNING "SMU: can't " printk 618 drivers/macintosh/smu.c printk(KERN_WARNING "SMU: can't " printk 939 drivers/macintosh/smu.c printk(KERN_DEBUG "SMU: short read in " printk 992 drivers/macintosh/smu.c printk(KERN_DEBUG "SMU: datablock read failed while reading " printk 999 drivers/macintosh/smu.c printk(KERN_DEBUG "SMU: Reading partition %02x and got " printk 1004 drivers/macintosh/smu.c printk(KERN_DEBUG "SMU: Failed creating sdb-partition-%02x " printk 1334 drivers/macintosh/smu.c printk(KERN_ERR "via-pmu: cannot register misc device.\n"); printk 164 drivers/macintosh/therm_adt746x.c printk(KERN_DEBUG "adt746x: Setting speed to automatic " printk 167 drivers/macintosh/therm_adt746x.c printk(KERN_DEBUG "adt746x: Setting speed to %d " printk 213 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: Temperature infos:" printk 256 drivers/macintosh/therm_adt746x.c printk(KERN_DEBUG "adt746x: Setting fans speed to %d " printk 268 drivers/macintosh/therm_adt746x.c printk(KERN_DEBUG "adt746x: Stopping " printk 356 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \ printk 370 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "Setting specified fan speed to %d\n", val); \ printk 442 drivers/macintosh/therm_adt746x.c printk(KERN_WARNING printk 482 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: version %d (%ssupported)\n", printk 495 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]); printk 520 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: ADT7460 initializing\n"); printk 524 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: ADT7467 initializing\n"); printk 531 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d" printk 557 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: Kthread creation failed\n"); printk 577 drivers/macintosh/therm_adt746x.c printk(KERN_INFO "adt746x: Putting max temperatures back from " printk 95 drivers/macintosh/therm_windtunnel.c printk("%s%d.%d C", s ? s : "", temp>>8, (temp & 255)*10/256 ); printk 163 drivers/macintosh/therm_windtunnel.c printk(", Fan: %d (tuned %+d)\n", 11-fan_setting, x.fan_level-fan_setting ); printk 185 drivers/macintosh/therm_windtunnel.c printk(", Fan: %d\n", 11-x.fan_level ); printk 225 drivers/macintosh/therm_windtunnel.c printk("Failed writing config register\n"); printk 247 drivers/macintosh/therm_windtunnel.c printk(")\n"); printk 258 drivers/macintosh/therm_windtunnel.c printk(KERN_WARNING printk 351 drivers/macintosh/therm_windtunnel.c printk(KERN_ERR "g4fan: bad client\n"); printk 365 drivers/macintosh/therm_windtunnel.c printk("ADM1030 fan controller [@%02x]\n", cl->addr ); printk 391 drivers/macintosh/therm_windtunnel.c printk("DS1775 digital thermometer [@%02x]\n", cl->addr ); printk 395 drivers/macintosh/therm_windtunnel.c printk("\n"); printk 529 drivers/macintosh/therm_windtunnel.c printk(KERN_ERR "therm_windtunnel: unsupported thermal design %d\n", info->id ); printk 538 drivers/macintosh/therm_windtunnel.c printk(KERN_ERR "Can't register fan controller!\n"); printk 219 drivers/macintosh/via-cuda.c printk(KERN_ERR "cuda_init_via() failed\n"); printk 247 drivers/macintosh/via-cuda.c printk(KERN_ERR "via-cuda: No \"reg\" property !\n"); printk 252 drivers/macintosh/via-cuda.c printk(KERN_ERR "via-cuda: Can't translate address !\n"); printk 257 drivers/macintosh/via-cuda.c printk(KERN_ERR "via-cuda: Can't map address !\n"); printk 266 drivers/macintosh/via-cuda.c printk(KERN_ERR "cuda_init_via() failed\n"); printk 301 drivers/macintosh/via-cuda.c printk(KERN_ERR "via-cuda: can't map interrupts for %pOF\n", printk 308 drivers/macintosh/via-cuda.c printk(KERN_ERR "via-cuda: can't request irq %d\n", cuda_irq); printk 166 drivers/macintosh/via-pmu-backlight.c printk(KERN_ERR "PMU Backlight registration failed\n"); printk 189 drivers/macintosh/via-pmu-backlight.c printk(KERN_INFO "PMU Backlight initialized (%s)\n", name); printk 303 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: No \"reg\" property !\n"); printk 308 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: Can't translate address !\n"); printk 354 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n"); printk 362 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: Can't map address !\n"); printk 446 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: can't map interrupt\n"); printk 455 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: can't request irq %d\n", irq); printk 471 drivers/macintosh/via-pmu.c printk(KERN_ERR "pmu: can't get irq %d" printk 597 drivers/macintosh/via-pmu.c printk(KERN_ERR "init_pmu: no response from PMU\n"); printk 609 drivers/macintosh/via-pmu.c printk(KERN_ERR "init_pmu: timed out acking intrs\n"); printk 639 drivers/macintosh/via-pmu.c printk(KERN_INFO "via-pmu: Server Mode is %s\n", printk 644 drivers/macintosh/via-pmu.c printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n", printk 1115 drivers/macintosh/via-pmu.c printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n"); printk 1139 drivers/macintosh/via-pmu.c printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes); printk 1202 drivers/macintosh/via-pmu.c printk(KERN_ERR "PMU not responding (!ack)\n"); printk 1406 drivers/macintosh/via-pmu.c printk(KERN_ERR "PMU: extra ADB reply\n"); printk 1486 drivers/macintosh/via-pmu.c printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B])); printk 1547 drivers/macintosh/via-pmu.c printk(KERN_ERR "PMU: bad reply len %d\n", bite); printk 1578 drivers/macintosh/via-pmu.c printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n", printk 1622 drivers/macintosh/via-pmu.c printk(KERN_DEBUG "PMU: stuck in intr loop, " printk 1958 drivers/macintosh/via-pmu.c printk(KERN_ERR "Sleep mode not supported on this machine\n"); printk 2048 drivers/macintosh/via-pmu.c printk(KERN_WARNING "ioremap failed: sleep won't be possible"); printk 2502 drivers/macintosh/via-pmu.c printk(KERN_ERR "via-pmu: cannot register misc device.\n"); printk 47 drivers/macintosh/windfarm_core.c #define DBG(args...) printk(args) printk 108 drivers/macintosh/windfarm_core.c printk(KERN_ERR "windfarm: Overtemp " printk 131 drivers/macintosh/windfarm_core.c printk(KERN_ERR "windfarm: failed to create thread,err %ld\n", printk 216 drivers/macintosh/windfarm_core.c printk(KERN_WARNING "windfarm: trying to register" printk 231 drivers/macintosh/windfarm_core.c printk(KERN_WARNING "windfarm: device_create_file failed" printk 311 drivers/macintosh/windfarm_core.c printk(KERN_WARNING "windfarm: trying to register" printk 326 drivers/macintosh/windfarm_core.c printk(KERN_WARNING "windfarm: device_create_file failed" printk 414 drivers/macintosh/windfarm_core.c printk(KERN_WARNING "windfarm: Overtemp condition detected !\n"); printk 432 drivers/macintosh/windfarm_core.c printk(KERN_WARNING "windfarm: Overtemp condition cleared !\n"); printk 30 drivers/macintosh/windfarm_cpufreq_clamp.c printk(KERN_INFO "windfarm: Clamping CPU frequency to " printk 34 drivers/macintosh/windfarm_cpufreq_clamp.c printk(KERN_INFO "windfarm: CPU frequency unclamped !\n"); printk 28 drivers/macintosh/windfarm_fcu_controls.c #define DBG(args...) printk(args) printk 31 drivers/macintosh/windfarm_lm75_sensor.c #define DBG(args...) printk(args) printk 29 drivers/macintosh/windfarm_lm87_sensor.c #define DBG(args...) printk(args) printk 59 drivers/macintosh/windfarm_lm87_sensor.c printk(KERN_ERR "wf_lm87: Error reading LM87 !\n"); printk 91 drivers/macintosh/windfarm_max6690_sensor.c printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: " printk 20 drivers/macintosh/windfarm_pid.c #define DBG(args...) printk(args) printk 27 drivers/macintosh/windfarm_pm112.c #define DBG(args...) printk(args) printk 33 drivers/macintosh/windfarm_pm112.c #define DBG_LOTS(args...) printk(args) printk 138 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n"); printk 204 drivers/macintosh/windfarm_pm112.c printk(KERN_ERR "windfarm: Overtemp due to immediate CPU" printk 210 drivers/macintosh/windfarm_pm112.c printk(KERN_ERR "windfarm: Critical overtemp due to" printk 231 drivers/macintosh/windfarm_pm112.c printk(KERN_ERR "windfarm: Overtemp due to average CPU" printk 237 drivers/macintosh/windfarm_pm112.c printk(KERN_ERR "windfarm: Critical overtemp due to" printk 254 drivers/macintosh/windfarm_pm112.c printk(KERN_ERR "windfarm: Overtemp condition cleared !\n"); printk 278 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: CPU %d temperature " printk 293 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: CPU %d power " printk 331 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: fan %s reports " printk 360 drivers/macintosh/windfarm_pm112.c printk(KERN_INFO "windfarm: Backside control loop started.\n"); printk 372 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n", printk 384 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: backside fan error %d\n", err); printk 410 drivers/macintosh/windfarm_pm112.c printk(KERN_INFO "windfarm: Drive bay control loop started.\n"); printk 422 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: drive bay temp sensor " printk 434 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err); printk 462 drivers/macintosh/windfarm_pm112.c printk(KERN_INFO "windfarm: Slots control loop started.\n"); printk 469 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: slots power sensor error %d\n", printk 481 drivers/macintosh/windfarm_pm112.c printk(KERN_WARNING "windfarm: slots fan error %d\n", err); printk 509 drivers/macintosh/windfarm_pm112.c printk(KERN_INFO "windfarm: CPUs control loops started.\n"); printk 685 drivers/macintosh/windfarm_pm112.c printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n"); printk 524 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: %s fan config not found " printk 536 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: Memory allocation error\n"); printk 572 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: failed to set up %s loop " printk 603 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "windfarm: %s sensor error %d\n", printk 631 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "windfarm: %s fan error %d\n", printk 654 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: CPU PID fan config not found.\n"); printk 680 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: History size overflow on " printk 709 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: CPU fan config not found, max fan speed\n"); printk 735 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: CPU temp sensor error %d\n", printk 743 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: CPU power sensor error %d\n", printk 774 drivers/macintosh/windfarm_pm121.c printk(KERN_WARNING "pm121: %s fan error %d\n", printk 980 drivers/macintosh/windfarm_pm121.c printk(KERN_INFO "pm121: Initializing for iMac G5 iSight model ID %d\n", printk 27 drivers/macintosh/windfarm_pm72.c #define DBG(args...) printk(args) printk 33 drivers/macintosh/windfarm_pm72.c #define DBG_LOTS(args...) printk(args) printk 135 drivers/macintosh/windfarm_pm72.c printk(KERN_ERR "windfarm: Overtemp due to immediate CPU" printk 141 drivers/macintosh/windfarm_pm72.c printk(KERN_ERR "windfarm: Critical overtemp due to" printk 178 drivers/macintosh/windfarm_pm72.c printk(KERN_ERR "windfarm: Overtemp due to average CPU" printk 184 drivers/macintosh/windfarm_pm72.c printk(KERN_ERR "windfarm: Critical overtemp due to" printk 201 drivers/macintosh/windfarm_pm72.c printk(KERN_ERR "windfarm: Overtemp condition cleared !\n"); printk 484 drivers/macintosh/windfarm_pm72.c printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n", printk 497 drivers/macintosh/windfarm_pm72.c printk(KERN_WARNING "windfarm: backside fan error %d\n", err); printk 576 drivers/macintosh/windfarm_pm72.c printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err); printk 614 drivers/macintosh/windfarm_pm72.c printk(KERN_INFO "windfarm: CPUs control loops started.\n"); printk 119 drivers/macintosh/windfarm_pm81.c #define DBG(args...) printk(args) printk 279 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: System fan config not found " printk 288 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: Memory allocation error" printk 342 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: HD temp sensor error %d\n", printk 378 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: Sys fan error %d\n", printk 386 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: HD fan error %d\n", printk 404 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: CPU PID fan config not found " printk 434 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: History size overflow on " printk 463 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: CPU fan config not found\n" printk 486 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n", printk 494 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: CPU power sensor error %d\n", printk 530 drivers/macintosh/windfarm_pm81.c printk(KERN_WARNING "windfarm: CPU main fan" printk 713 drivers/macintosh/windfarm_pm81.c printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n", printk 54 drivers/macintosh/windfarm_pm91.c #define DBG(args...) printk(args) printk 153 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU PID fan config not found " printk 180 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: History size overflow on " printk 209 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU fan config not found\n" printk 232 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n", printk 240 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU power sensor error %d\n", printk 267 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU main fan" printk 275 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU second fan" printk 283 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: CPU third fan" printk 305 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: Memory allocation error" printk 341 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: HD temp sensor error %d\n", printk 364 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: HD fan error %d\n", printk 386 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: Memory allocation error" printk 422 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: Slots power sensor error %d\n", printk 447 drivers/macintosh/windfarm_pm91.c printk(KERN_WARNING "windfarm: Slots fan error %d\n", printk 637 drivers/macintosh/windfarm_pm91.c printk(KERN_INFO "windfarm: Initializing for Desktop G5 model\n"); printk 27 drivers/macintosh/windfarm_rm31.c #define DBG(args...) printk(args) printk 33 drivers/macintosh/windfarm_rm31.c #define DBG_LOTS(args...) printk(args) printk 129 drivers/macintosh/windfarm_rm31.c printk(KERN_ERR "windfarm: Overtemp due to immediate CPU" printk 135 drivers/macintosh/windfarm_rm31.c printk(KERN_ERR "windfarm: Critical overtemp due to" printk 172 drivers/macintosh/windfarm_rm31.c printk(KERN_ERR "windfarm: Overtemp due to average CPU" printk 178 drivers/macintosh/windfarm_rm31.c printk(KERN_ERR "windfarm: Critical overtemp due to" printk 195 drivers/macintosh/windfarm_rm31.c printk(KERN_ERR "windfarm: Overtemp condition cleared !\n"); printk 386 drivers/macintosh/windfarm_rm31.c printk(KERN_WARNING "windfarm: U3 temp sensor error %d\n", printk 399 drivers/macintosh/windfarm_rm31.c printk(KERN_WARNING "windfarm: DIMMs temp sensor error %d\n", printk 414 drivers/macintosh/windfarm_rm31.c printk(KERN_WARNING "windfarm: backside fan error %d\n", err); printk 481 drivers/macintosh/windfarm_rm31.c printk(KERN_WARNING "windfarm: slots bay fan error %d\n", err); printk 517 drivers/macintosh/windfarm_rm31.c printk(KERN_INFO "windfarm: CPUs control loops started.\n"); printk 30 drivers/macintosh/windfarm_smu_controls.c #define DBG(args...) printk(args) printk 99 drivers/macintosh/windfarm_smu_controls.c printk(KERN_WARNING "windfarm: SMU failed new fan command " printk 278 drivers/macintosh/windfarm_smu_controls.c printk(KERN_WARNING "windfarm: Failed to create SMU " printk 297 drivers/macintosh/windfarm_smu_controls.c printk(KERN_WARNING "windfarm: Failed to create SMU " printk 67 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err); printk 73 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n"); printk 78 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "smu_sat_get_sdb_part no partition %x\n", id); printk 91 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n", printk 101 drivers/macintosh/windfarm_smu_sat.c printk(KERN_DEBUG "sat %d partition %x:", sat_id, id); printk 127 drivers/macintosh/windfarm_smu_sat.c printk(KERN_DEBUG "wf_sat_get: data is"); printk 237 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "wf_sat_create: don't understand " printk 245 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "wf_sat_create: can't cope with " printk 267 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "wf_sat_create: couldn't create " printk 294 drivers/macintosh/windfarm_smu_sat.c printk(KERN_ERR "wf_sat_create: couldn't create power " printk 30 drivers/macintosh/windfarm_smu_sensors.c #define DBG(args...) printk(args) printk 79 drivers/macintosh/windfarm_smu_sensors.c printk(KERN_ERR "winfarm: read ADC 0x%x returned %d bytes !\n", printk 96 drivers/macintosh/windfarm_smu_sensors.c printk(KERN_ERR "windfarm: read CPU temp failed, err %d\n", printk 118 drivers/macintosh/windfarm_smu_sensors.c printk(KERN_ERR "windfarm: read CPU current failed, err %d\n", printk 139 drivers/macintosh/windfarm_smu_sensors.c printk(KERN_ERR "windfarm: read CPU voltage failed, err %d\n", printk 160 drivers/macintosh/windfarm_smu_sensors.c printk(KERN_ERR "windfarm: read slots power failed, err %d\n", printk 353 drivers/macintosh/windfarm_smu_sensors.c printk(KERN_INFO "windfarm: CPU Power sensor using faked" printk 326 drivers/md/dm-integrity.c #define DEBUG_print(x, ...) printk(KERN_DEBUG x, ##__VA_ARGS__) printk 815 drivers/md/dm-mpath.c printk(KERN_INFO "dm-mpath: retaining handler on device %s\n", printk 31 drivers/media/common/b2c2/flexcop-common.h printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg) printk 34 drivers/media/common/b2c2/flexcop-common.h printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg) printk 37 drivers/media/common/b2c2/flexcop-common.h printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg) printk 92 drivers/media/common/b2c2/flexcop-sram.c printk("%s: SRAM timeout\n", __func__); printk 117 drivers/media/common/b2c2/flexcop-sram.c printk("%s: SRAM timeout\n", __func__); printk 129 drivers/media/common/b2c2/flexcop-sram.c printk("%s: SRAM timeout\n", __func__); printk 18 drivers/media/common/b2c2/flexcop.h do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0) printk 1211 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Stream: %s", printk 1215 drivers/media/common/cx2341x.c printk(KERN_CONT " (with navigation packets)"); printk 1216 drivers/media/common/cx2341x.c printk(KERN_CONT "\n"); printk 1217 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: VBI Format: %s\n", printk 1222 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Video: %dx%d, %d fps%s\n", printk 1227 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Video: %s, %s, %s, %d", printk 1234 drivers/media/common/cx2341x.c printk(KERN_CONT ", Peak %d", p->video_bitrate_peak); printk 1235 drivers/media/common/cx2341x.c printk(KERN_CONT "\n"); printk 1236 drivers/media/common/cx2341x.c printk(KERN_INFO printk 1242 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Video: Temporal Decimation %d\n", printk 1246 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Audio: %s, %s, %s, %s%s", printk 1257 drivers/media/common/cx2341x.c printk(KERN_CONT ", %s", cx2341x_menu_item(p, printk 1259 drivers/media/common/cx2341x.c printk(KERN_CONT ", %s, %s\n", printk 1264 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Spatial Filter: %s, Luma %s, Chroma %s, %d\n", printk 1274 drivers/media/common/cx2341x.c printk(KERN_INFO "%s: Temporal Filter: %s, %d\n", printk 1279 drivers/media/common/cx2341x.c printk(KERN_INFO printk 185 drivers/media/common/videobuf2/videobuf2-dma-contig.c printk(KERN_ERR "No buffer to map\n"); printk 31 drivers/media/common/videobuf2/videobuf2-dma-sg.c printk(KERN_DEBUG "vb2-dma-sg: " fmt, ## arg); \ printk 333 drivers/media/common/videobuf2/videobuf2-dma-sg.c printk(KERN_ERR "No memory to map\n"); printk 339 drivers/media/common/videobuf2/videobuf2-dma-sg.c printk(KERN_ERR "Remapping memory, error: %d\n", err); printk 40 drivers/media/dvb-core/dmxdev.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 40 drivers/media/dvb-core/dvb_ca_en50221.c printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\ printk 51 drivers/media/dvb-core/dvb_demux.c printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg) printk 59 drivers/media/dvb-core/dvb_frontend.c printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg) printk 47 drivers/media/dvb-core/dvbdev.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 52 drivers/media/dvb-frontends/ascot2e.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 18 drivers/media/dvb-frontends/atbm8830.c printk(KERN_DEBUG "atbm8830: " args); \ printk 57 drivers/media/dvb-frontends/atbm8830.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 59 drivers/media/dvb-frontends/au8522.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 21 drivers/media/dvb-frontends/au8522_common.c printk(arg);\ printk 41 drivers/media/dvb-frontends/au8522_common.c printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, ret == %i)\n", printk 63 drivers/media/dvb-frontends/au8522_common.c printk(KERN_ERR "%s: readreg error (ret == %i)\n", printk 398 drivers/media/dvb-frontends/au8522_decoder.c printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n", printk 572 drivers/media/dvb-frontends/au8522_decoder.c printk(KERN_ERR "au8522 mode not currently supported\n"); printk 693 drivers/media/dvb-frontends/au8522_decoder.c printk(KERN_ERR "au8522_decoder allocation failed\n"); printk 697 drivers/media/dvb-frontends/au8522_decoder.c printk(KERN_INFO "au8522_decoder creating new instance...\n"); printk 701 drivers/media/dvb-frontends/au8522_decoder.c printk(KERN_INFO "au8522_decoder attach existing instance.\n"); printk 24 drivers/media/dvb-frontends/au8522_dig.c printk(arg);\ printk 868 drivers/media/dvb-frontends/au8522_dig.c printk(KERN_ERR "%s: Failed to initialize correctly\n", printk 70 drivers/media/dvb-frontends/bcm3510.c #define dprintk(level,x...) if (level & debug) printk(x) printk 31 drivers/media/dvb-frontends/bcm3510.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 15 drivers/media/dvb-frontends/bcm3510_priv.h #define err(format, arg...) printk(KERN_ERR "bcm3510: " format "\n" , ## arg) printk 17 drivers/media/dvb-frontends/bcm3510_priv.h #define info(format, arg...) printk(KERN_INFO "bcm3510: " format "\n" , ## arg) printk 19 drivers/media/dvb-frontends/bcm3510_priv.h #define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n" , ## arg) printk 33 drivers/media/dvb-frontends/cx22700.c if (debug) printk(KERN_DEBUG "cx22700: " args); \ printk 69 drivers/media/dvb-frontends/cx22700.c printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", printk 29 drivers/media/dvb-frontends/cx22700.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 42 drivers/media/dvb-frontends/cx22702.c #define dprintk if (debug) printk printk 84 drivers/media/dvb-frontends/cx22702.c printk(KERN_ERR printk 107 drivers/media/dvb-frontends/cx22702.c printk(KERN_ERR "%s: error (reg == 0x%02x, ret == %i)\n", printk 40 drivers/media/dvb-frontends/cx22702.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/cx24110.c if (debug) printk(KERN_DEBUG "cx24110: " args); \ printk 43 drivers/media/dvb-frontends/cx24110.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 20 drivers/media/dvb-frontends/cx24113.c #define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0) printk 21 drivers/media/dvb-frontends/cx24113.c #define cx_err(args...) do { printk(KERN_ERR "CX24113: " args); } while (0) printk 26 drivers/media/dvb-frontends/cx24113.c printk(KERN_DEBUG "CX24113: %s: ", __func__); \ printk 27 drivers/media/dvb-frontends/cx24113.c printk(args); \ printk 97 drivers/media/dvb-frontends/cx24113.c printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n", printk 119 drivers/media/dvb-frontends/cx24113.c printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n", printk 28 drivers/media/dvb-frontends/cx24113.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 34 drivers/media/dvb-frontends/cx24113.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 42 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "cx24116: " args); \ printk 195 drivers/media/dvb-frontends/cx24116.c printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", printk 200 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", printk 229 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "cx24116: %s: write regN 0x%02x, len = %d\n", printk 234 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n", printk 259 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s: reg=0x%x (error=%d)\n", printk 265 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n", printk 478 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", printk 482 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", printk 485 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", printk 496 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s: Writing firmware to device failed\n", printk 501 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "%s: Firmware upload %s\n", __func__, printk 524 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s(): Unable initialise the firmware\n", printk 542 drivers/media/dvb-frontends/cx24116.c printk(KERN_WARNING "%s() Firmware not responding\n", printk 666 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__, printk 868 drivers/media/dvb-frontends/cx24116.c printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); printk 958 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "cx24116: %s(", __func__); printk 960 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "0x%02x", d->msg[i]); printk 962 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO ", "); printk 964 drivers/media/dvb-frontends/cx24116.c printk(") toneburst=%d\n", toneburst); printk 1126 drivers/media/dvb-frontends/cx24116.c printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n"); printk 40 drivers/media/dvb-frontends/cx24116.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 32 drivers/media/dvb-frontends/cx24123.c #define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0) printk 33 drivers/media/dvb-frontends/cx24123.c #define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0) printk 38 drivers/media/dvb-frontends/cx24123.c printk(KERN_DEBUG "CX24123: %s: ", __func__); \ printk 39 drivers/media/dvb-frontends/cx24123.c printk(args); \ printk 245 drivers/media/dvb-frontends/cx24123.c printk("%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n", printk 37 drivers/media/dvb-frontends/cx24123.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 43 drivers/media/dvb-frontends/cx24123.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 122 drivers/media/dvb-frontends/cxd2820r.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 29 drivers/media/dvb-frontends/dib0070.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 57 drivers/media/dvb-frontends/dib0070.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 63 drivers/media/dvb-frontends/dib0070.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 69 drivers/media/dvb-frontends/dib0070.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 29 drivers/media/dvb-frontends/dib0090.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 96 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 102 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 108 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 113 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 118 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 124 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 130 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 136 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 142 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 148 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 153 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 159 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 165 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 172 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 179 drivers/media/dvb-frontends/dib0090.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 47 drivers/media/dvb-frontends/dib3000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 34 drivers/media/dvb-frontends/dib3000mb_priv.h printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 31 drivers/media/dvb-frontends/dib3000mc.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 54 drivers/media/dvb-frontends/dib3000mc.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 63 drivers/media/dvb-frontends/dib3000mc.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 71 drivers/media/dvb-frontends/dib3000mc.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 26 drivers/media/dvb-frontends/dib7000m.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 56 drivers/media/dvb-frontends/dib7000m.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 65 drivers/media/dvb-frontends/dib7000m.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 71 drivers/media/dvb-frontends/dib7000m.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 78 drivers/media/dvb-frontends/dib7000m.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 31 drivers/media/dvb-frontends/dib7000p.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 73 drivers/media/dvb-frontends/dib7000p.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 36 drivers/media/dvb-frontends/dib8000.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 71 drivers/media/dvb-frontends/dib8000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 26 drivers/media/dvb-frontends/dib9000.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 48 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 54 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 60 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 66 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 72 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 78 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 84 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 90 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 96 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 102 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 108 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 114 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 120 drivers/media/dvb-frontends/dib9000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 16 drivers/media/dvb-frontends/dibx000_common.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 49 drivers/media/dvb-frontends/drxd.h printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", printk 294 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_ERR "error in write_chunk\n"); printk 531 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_ERR "Can't read SC_RA_RAM_LOCK__A status = %08x\n", status); printk 895 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_ERR "drxd: firmware load failure [%s]\n", fw_name); printk 1140 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_ERR "invalid osc frequency %d\n", state->osc_clock_freq); printk 1317 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_ERR "Command Error\n"); printk 1501 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_INFO "drxd: deviceId = %04x\n", deviceId); printk 1508 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_INFO "DRX3975D-A2\n"); printk 1511 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_INFO "DRX397%dD-B1\n", deviceId); printk 2947 drivers/media/dvb-frontends/drxd_hard.c printk(KERN_ERR "drxd: not found\n"); printk 70 drivers/media/dvb-frontends/drxk.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 155 drivers/media/dvb-frontends/drxk_hard.c printk(KERN_DEBUG KBUILD_MODNAME ": %s " fmt, __func__, ##arg); \ printk 26 drivers/media/dvb-frontends/ds3000.c printk(args); \ printk 239 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", printk 285 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "%s: write error(err == %i, reg == 0x%02x\n", printk 321 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret); printk 347 drivers/media/dvb-frontends/ds3000.c printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__, printk 351 drivers/media/dvb-frontends/ds3000.c printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); printk 353 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", printk 360 drivers/media/dvb-frontends/ds3000.c printk("%s: Writing firmware to device failed\n", __func__); printk 663 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); printk 842 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "Invalid probe, probably not a DS3000\n"); printk 846 drivers/media/dvb-frontends/ds3000.c printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n", printk 1080 drivers/media/dvb-frontends/ds3000.c printk(KERN_ERR "%s: Unable initialize firmware\n", __func__); printk 33 drivers/media/dvb-frontends/ds3000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 19 drivers/media/dvb-frontends/dvb-pll.c printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg) printk 60 drivers/media/dvb-frontends/dvb-pll.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 21 drivers/media/dvb-frontends/dvb_dummy_fe.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 26 drivers/media/dvb-frontends/dvb_dummy_fe.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 31 drivers/media/dvb-frontends/dvb_dummy_fe.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 24 drivers/media/dvb-frontends/gp8psk-fe.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 52 drivers/media/dvb-frontends/horus3a.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 52 drivers/media/dvb-frontends/isl6405.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 33 drivers/media/dvb-frontends/isl6421.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 33 drivers/media/dvb-frontends/isl6423.c printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ printk 35 drivers/media/dvb-frontends/isl6423.c printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ printk 37 drivers/media/dvb-frontends/isl6423.c printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ printk 39 drivers/media/dvb-frontends/isl6423.c printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ printk 42 drivers/media/dvb-frontends/isl6423.c printk(format, ##arg); \ printk 45 drivers/media/dvb-frontends/isl6423.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 29 drivers/media/dvb-frontends/itd1000.c printk(KERN_DEBUG "ITD1000: " args);\ printk 34 drivers/media/dvb-frontends/itd1000.c printk(KERN_WARNING "ITD1000: " args); \ printk 38 drivers/media/dvb-frontends/itd1000.c printk(KERN_INFO "ITD1000: " args); \ printk 50 drivers/media/dvb-frontends/itd1000.c printk(KERN_WARNING printk 62 drivers/media/dvb-frontends/itd1000.c printk(KERN_WARNING "itd1000 I2C write failed\n"); printk 23 drivers/media/dvb-frontends/itd1000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 18 drivers/media/dvb-frontends/ix2505v.c printk(KERN_DEBUG "ix2505v: " args); \ printk 48 drivers/media/dvb-frontends/ix2505v.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 31 drivers/media/dvb-frontends/l64781.c if (debug) printk(KERN_DEBUG "l64781: " args); \ printk 264 drivers/media/dvb-frontends/l64781.c printk(KERN_WARNING "Unexpected value for transmission_mode\n"); printk 285 drivers/media/dvb-frontends/l64781.c printk("Unexpected value for code_rate_HP\n"); printk 304 drivers/media/dvb-frontends/l64781.c printk("Unexpected value for code_rate_LP\n"); printk 319 drivers/media/dvb-frontends/l64781.c printk(KERN_WARNING "Unexpected value for modulation\n"); printk 335 drivers/media/dvb-frontends/l64781.c printk("Unexpected value for hierarchy\n"); printk 29 drivers/media/dvb-frontends/l64781.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 20 drivers/media/dvb-frontends/lg2160.c printk(kern "%s: " fmt, __func__, ##arg) printk 22 drivers/media/dvb-frontends/lg2160.c #define lg_info(fmt, arg...) printk(KERN_INFO "lg2160: " fmt, ##arg) printk 64 drivers/media/dvb-frontends/lg2160.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 24 drivers/media/dvb-frontends/lgdt3305.c printk(kern "%s: " fmt, __func__, ##arg) printk 26 drivers/media/dvb-frontends/lgdt3305.c #define lg_info(fmt, arg...) printk(KERN_INFO "lgdt3305: " fmt, ##arg) printk 77 drivers/media/dvb-frontends/lgdt3305.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 40 drivers/media/dvb-frontends/lgdt3306a.c printk(KERN_DEBUG pr_fmt(fmt), ## arg) printk 64 drivers/media/dvb-frontends/lgdt3306a.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 55 drivers/media/dvb-frontends/lgdt330x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 54 drivers/media/dvb-frontends/lgs8gl5.c printk(KERN_DEBUG "lgs8gl5: " args); \ printk 27 drivers/media/dvb-frontends/lgs8gl5.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 23 drivers/media/dvb-frontends/lgs8gxx.c printk(KERN_DEBUG "lgs8gxx: " args); \ printk 75 drivers/media/dvb-frontends/lgs8gxx.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 35 drivers/media/dvb-frontends/lnbh24.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 41 drivers/media/dvb-frontends/lnbh25.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 31 drivers/media/dvb-frontends/lnbh29.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 146 drivers/media/dvb-frontends/lnbp21.c printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr); printk 52 drivers/media/dvb-frontends/lnbp21.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 27 drivers/media/dvb-frontends/lnbp22.c #define dprintk(lvl, arg...) if (debug >= (lvl)) printk(arg) printk 34 drivers/media/dvb-frontends/lnbp22.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 44 drivers/media/dvb-frontends/m88rs2000.c printk(KERN_DEBUG "m88rs2000-fe: " args); \ printk 49 drivers/media/dvb-frontends/m88rs2000.c printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg) printk 38 drivers/media/dvb-frontends/m88rs2000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 46 drivers/media/dvb-frontends/mb86a16.c printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \ printk 48 drivers/media/dvb-frontends/mb86a16.c printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \ printk 50 drivers/media/dvb-frontends/mb86a16.c printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \ printk 52 drivers/media/dvb-frontends/mb86a16.c printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \ printk 55 drivers/media/dvb-frontends/mb86a16.c printk(format, ##arg); \ printk 35 drivers/media/dvb-frontends/mb86a16.h printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); printk 43 drivers/media/dvb-frontends/mb86a20s.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 44 drivers/media/dvb-frontends/mt312.c printk(KERN_DEBUG "mt312: " args); \ printk 69 drivers/media/dvb-frontends/mt312.c printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret); printk 77 drivers/media/dvb-frontends/mt312.c printk(KERN_CONT " %02x", buf[i]); printk 78 drivers/media/dvb-frontends/mt312.c printk("\n"); printk 92 drivers/media/dvb-frontends/mt312.c printk(KERN_WARNING printk 101 drivers/media/dvb-frontends/mt312.c printk(KERN_CONT " %02x", src[i]); printk 102 drivers/media/dvb-frontends/mt312.c printk("\n"); printk 825 drivers/media/dvb-frontends/mt312.c printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n"); printk 33 drivers/media/dvb-frontends/mt312.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 41 drivers/media/dvb-frontends/mt352.c if (debug) printk(KERN_DEBUG "mt352: " args); \ printk 52 drivers/media/dvb-frontends/mt352.c printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err); printk 83 drivers/media/dvb-frontends/mt352.c printk("%s: readreg error (reg=%d, ret==%i)\n", printk 47 drivers/media/dvb-frontends/mt352.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 38 drivers/media/dvb-frontends/nxt200x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 34 drivers/media/dvb-frontends/nxt6000.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 31 drivers/media/dvb-frontends/nxt6000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/or51132.c if (debug) printk(KERN_DEBUG "or51132: " args); \ printk 68 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n", printk 91 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n", printk 110 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n", printk 135 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error 1\n"); printk 140 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error 2\n"); printk 145 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error 3\n"); printk 149 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error 4\n"); printk 159 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error a\n"); printk 163 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error b\n"); printk 167 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error c\n"); printk 177 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING printk 183 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING printk 191 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: load_firmware error e\n"); printk 252 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING printk 260 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: set_mode error 1\n"); printk 267 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: set_mode error 2\n"); printk 322 drivers/media/dvb-frontends/or51132.c printk("or51132: Modulation type(%d) UNSUPPORTED\n", printk 326 drivers/media/dvb-frontends/or51132.c printk("or51132: Waiting for firmware upload(%s)...\n", printk 330 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n"); printk 336 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: Writing firmware to device failed!\n"); printk 339 drivers/media/dvb-frontends/or51132.c printk("or51132: Firmware upload complete.\n"); printk 371 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n"); printk 387 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: unknown status 0x%02x\n", printk 408 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg); printk 469 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n"); printk 478 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n"); printk 493 drivers/media/dvb-frontends/or51132.c printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff); printk 30 drivers/media/dvb-frontends/or51132.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 33 drivers/media/dvb-frontends/or51211.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 50 drivers/media/dvb-frontends/s5h1409.c #define dprintk if (debug) printk printk 312 drivers/media/dvb-frontends/s5h1409.c printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, ret == %i)\n", printk 333 drivers/media/dvb-frontends/s5h1409.c printk("%s: readreg error (ret == %i)\n", __func__, ret); printk 970 drivers/media/dvb-frontends/s5h1409.c printk(KERN_ERR "%s: Failed to initialize correctly\n", printk 65 drivers/media/dvb-frontends/s5h1409.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 41 drivers/media/dvb-frontends/s5h1411.c printk(arg); \ printk 341 drivers/media/dvb-frontends/s5h1411.c printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n", printk 360 drivers/media/dvb-frontends/s5h1411.c printk(KERN_ERR "%s: readreg error (ret == %i)\n", printk 886 drivers/media/dvb-frontends/s5h1411.c printk(KERN_ERR "%s: Failed to initialize correctly\n", printk 67 drivers/media/dvb-frontends/s5h1411.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 62 drivers/media/dvb-frontends/s5h1420.c printk(KERN_DEBUG "S5H1420: " x); \ printk 365 drivers/media/dvb-frontends/s5h1420.c printk(KERN_ERR "s5h1420: avoided division by 0\n"); printk 840 drivers/media/dvb-frontends/s5h1420.c printk(KERN_WARNING printk 911 drivers/media/dvb-frontends/s5h1420.c printk(KERN_ERR "S5H1420/PN1010: tuner i2c bus could not be initialized\n"); printk 37 drivers/media/dvb-frontends/s5h1420.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 39 drivers/media/dvb-frontends/s5h1432.c printk(arg); \ printk 53 drivers/media/dvb-frontends/s5h1432.c printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n", printk 73 drivers/media/dvb-frontends/s5h1432.c printk(KERN_ERR "%s: readreg error (ret == %i)\n", printk 150 drivers/media/dvb-frontends/s5h1432.c printk(KERN_INFO printk 241 drivers/media/dvb-frontends/s5h1432.c printk(KERN_INFO " s5h1432_init().\n"); printk 338 drivers/media/dvb-frontends/s5h1432.c printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n"); printk 71 drivers/media/dvb-frontends/s5h1432.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 28 drivers/media/dvb-frontends/s921.c printk(KERN_ERR "s921: " args); \ printk 34 drivers/media/dvb-frontends/s921.c printk(KERN_DEBUG "s921: %s: ", __func__); \ printk 35 drivers/media/dvb-frontends/s921.c printk(args); \ printk 209 drivers/media/dvb-frontends/s921.c printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n", printk 27 drivers/media/dvb-frontends/s921.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 33 drivers/media/dvb-frontends/s921.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 106 drivers/media/dvb-frontends/si21xx.c printk(KERN_DEBUG "si21xx: " args); \ printk 23 drivers/media/dvb-frontends/si21xx.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 44 drivers/media/dvb-frontends/sp8870.c if (debug) printk(KERN_DEBUG "sp8870: " args); \ printk 121 drivers/media/dvb-frontends/sp8870.c printk("%s: firmware upload failed!\n", __func__); printk 122 drivers/media/dvb-frontends/sp8870.c printk ("%s: i2c error (err == %i)\n", __func__, err); printk 306 drivers/media/dvb-frontends/sp8870.c printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE); printk 308 drivers/media/dvb-frontends/sp8870.c printk("sp8870: no firmware upload (timeout or file not found?)\n"); printk 313 drivers/media/dvb-frontends/sp8870.c printk("sp8870: writing firmware to device failed\n"); printk 318 drivers/media/dvb-frontends/sp8870.c printk("sp8870: firmware upload complete\n"); printk 491 drivers/media/dvb-frontends/sp8870.c printk("%s: firmware crash!!!!!!\n", __func__); printk 498 drivers/media/dvb-frontends/sp8870.c printk("%s: firmware lockup!!!\n", __func__); printk 499 drivers/media/dvb-frontends/sp8870.c printk("%s: recovered after %i trial(s))\n", __func__, trials - 1); printk 504 drivers/media/dvb-frontends/sp8870.c printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups); printk 32 drivers/media/dvb-frontends/sp8870.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/sp887x.c if (debug) printk(KERN_DEBUG "sp887x: " args); \ printk 46 drivers/media/dvb-frontends/sp887x.c printk ("%s: i2c write error (addr %02x, err == %i)\n", printk 67 drivers/media/dvb-frontends/sp887x.c printk("%s: writereg error (reg %03x, data %03x, ret == %i)\n", printk 85 drivers/media/dvb-frontends/sp887x.c printk("%s: readreg error (ret == %i)\n", __func__, ret); printk 158 drivers/media/dvb-frontends/sp887x.c printk ("%s: firmware upload... ", __func__); printk 183 drivers/media/dvb-frontends/sp887x.c printk ("failed.\n"); printk 184 drivers/media/dvb-frontends/sp887x.c printk ("%s: i2c error (err == %i)\n", __func__, err); printk 528 drivers/media/dvb-frontends/sp887x.c printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE); printk 531 drivers/media/dvb-frontends/sp887x.c printk("sp887x: no firmware upload (timeout or file not found?)\n"); printk 538 drivers/media/dvb-frontends/sp887x.c printk("sp887x: writing firmware to device failed\n"); printk 541 drivers/media/dvb-frontends/sp887x.c printk("sp887x: firmware upload complete\n"); printk 28 drivers/media/dvb-frontends/sp887x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 321 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_ERR "%s ERR(1), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n", printk 343 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_ERR "%s ERR(2), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n", printk 351 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_ERR "%s ERR(3), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n", printk 358 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_DEBUG "%s Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n", printk 415 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_DEBUG "%s Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n", printk 421 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_ERR "%s ERR (1), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n", printk 428 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_ERR "%s ERR (2), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n", printk 463 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_ERR "%s Read error, Reg=[0x%04x], Count=%u, Status=%d\n", printk 496 drivers/media/dvb-frontends/stb0899_drv.c printk(KERN_WARNING printk 1630 drivers/media/dvb-frontends/stb0899_drv.c printk("%s: Exiting .. !\n", __func__); printk 1634 drivers/media/dvb-frontends/stb0899_drv.c printk("%s: Attaching STB0899 \n", __func__); printk 142 drivers/media/dvb-frontends/stb0899_drv.h printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); printk 25 drivers/media/dvb-frontends/stb0899_priv.h printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ printk 27 drivers/media/dvb-frontends/stb0899_priv.h printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ printk 29 drivers/media/dvb-frontends/stb0899_priv.h printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ printk 31 drivers/media/dvb-frontends/stb0899_priv.h printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ printk 34 drivers/media/dvb-frontends/stb0899_priv.h printk(format, ##arg); \ printk 21 drivers/media/dvb-frontends/stb6000.c printk(KERN_DEBUG "stb6000: " args); \ printk 33 drivers/media/dvb-frontends/stb6000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 33 drivers/media/dvb-frontends/stb6100.c printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ printk 35 drivers/media/dvb-frontends/stb6100.c printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ printk 37 drivers/media/dvb-frontends/stb6100.c printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ printk 39 drivers/media/dvb-frontends/stb6100.c printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ printk 42 drivers/media/dvb-frontends/stb6100.c printk(format, ##arg); \ printk 185 drivers/media/dvb-frontends/stb6100.c printk(KERN_WARNING printk 371 drivers/media/dvb-frontends/stb6100.c printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency); printk 548 drivers/media/dvb-frontends/stb6100.c printk("%s: Attaching STB6100 \n", __func__); printk 96 drivers/media/dvb-frontends/stb6100.h printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); printk 22 drivers/media/dvb-frontends/stb6100_cfg.h printk("%s: Invalid parameter\n", __func__); printk 44 drivers/media/dvb-frontends/stb6100_cfg.h printk("%s: Invalid parameter\n", __func__); printk 60 drivers/media/dvb-frontends/stb6100_cfg.h printk("%s: Invalid parameter\n", __func__); printk 82 drivers/media/dvb-frontends/stb6100_cfg.h printk("%s: Invalid parameter\n", __func__); printk 23 drivers/media/dvb-frontends/stb6100_proc.h printk("%s: Invalid parameter\n", __func__); printk 52 drivers/media/dvb-frontends/stb6100_proc.h printk("%s: Invalid parameter\n", __func__); printk 76 drivers/media/dvb-frontends/stb6100_proc.h printk(KERN_ERR "%s: Invalid parameter\n", __func__); printk 105 drivers/media/dvb-frontends/stb6100_proc.h printk(KERN_ERR "%s: Invalid parameter\n", __func__); printk 47 drivers/media/dvb-frontends/stv0288.c printk(KERN_DEBUG "stv0288: " args); \ printk 40 drivers/media/dvb-frontends/stv0288.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 31 drivers/media/dvb-frontends/stv0297.c #define dprintk(x...) printk(x) printk 40 drivers/media/dvb-frontends/stv0297.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 66 drivers/media/dvb-frontends/stv0299.c if (debug) printk(KERN_DEBUG "stv0299: " args); \ printk 411 drivers/media/dvb-frontends/stv0299.c printk ("%s switch command: 0x%04lx\n",__func__, cmd); printk 435 drivers/media/dvb-frontends/stv0299.c printk ("%s(%d): switch delay (should be 32k followed by all 8k\n", printk 438 drivers/media/dvb-frontends/stv0299.c printk("%d: %d\n", i, printk 570 drivers/media/dvb-frontends/stv0299.c printk("stv0299 does not support auto-inversion\n"); printk 93 drivers/media/dvb-frontends/stv0299.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/stv0367.c printk(KERN_DEBUG args); \ printk 134 drivers/media/dvb-frontends/stv0367.c printk(KERN_WARNING printk 146 drivers/media/dvb-frontends/stv0367.c printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__, printk 151 drivers/media/dvb-frontends/stv0367.c printk(KERN_ERR "%s: i2c write error! ([%02x] %02x: %02x)\n", printk 188 drivers/media/dvb-frontends/stv0367.c printk(KERN_ERR "%s: i2c read error ([%02x] %02x: %02x)\n", printk 192 drivers/media/dvb-frontends/stv0367.c printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__, printk 364 drivers/media/dvb-frontends/stv0367.c printk(KERN_ERR "%s: Invalid parameter\n", __func__); printk 1034 drivers/media/dvb-frontends/stv0367.c printk(KERN_ERR "ALGO: wrong TUNER type selected\n"); printk 3013 drivers/media/dvb-frontends/stv0367.c printk(KERN_ERR "Invalid symbol rate\n"); printk 45 drivers/media/dvb-frontends/stv0367.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 52 drivers/media/dvb-frontends/stv0367.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 59 drivers/media/dvb-frontends/stv0367.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 53 drivers/media/dvb-frontends/stv0900.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/stv0900_priv.h printk(KERN_DEBUG args); \ printk 720 drivers/media/dvb-frontends/stv090x.c printk(KERN_WARNING printk 113 drivers/media/dvb-frontends/stv090x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 24 drivers/media/dvb-frontends/stv090x_priv.h printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ printk 26 drivers/media/dvb-frontends/stv090x_priv.h printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ printk 28 drivers/media/dvb-frontends/stv090x_priv.h printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ printk 30 drivers/media/dvb-frontends/stv090x_priv.h printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ printk 33 drivers/media/dvb-frontends/stv090x_priv.h printk(format, ##arg); \ printk 37 drivers/media/dvb-frontends/stv6110.c printk(KERN_DEBUG args); \ printk 70 drivers/media/dvb-frontends/stv6110.c printk(KERN_WARNING printk 426 drivers/media/dvb-frontends/stv6110.c printk(KERN_INFO "STV6110 attached on addr=%x!\n", priv->i2c_address); printk 43 drivers/media/dvb-frontends/stv6110.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 65 drivers/media/dvb-frontends/stv6110x.c printk(KERN_WARNING printk 58 drivers/media/dvb-frontends/stv6110x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 23 drivers/media/dvb-frontends/stv6110x_priv.h printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ printk 25 drivers/media/dvb-frontends/stv6110x_priv.h printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ printk 27 drivers/media/dvb-frontends/stv6110x_priv.h printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ printk 29 drivers/media/dvb-frontends/stv6110x_priv.h printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ printk 32 drivers/media/dvb-frontends/stv6110x_priv.h printk(format, ##arg); \ printk 36 drivers/media/dvb-frontends/tda10021.c #define dprintk(x...) printk(x) printk 68 drivers/media/dvb-frontends/tda10021.c printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", printk 86 drivers/media/dvb-frontends/tda10021.c printk("DVB: TDA10021: %s: readreg error (ret == %i)\n", printk 99 drivers/media/dvb-frontends/tda10021.c printk("tda10021: lock tuner fails\n"); printk 113 drivers/media/dvb-frontends/tda10021.c printk("tda10021: unlock tuner fails\n"); printk 388 drivers/media/dvb-frontends/tda10021.c printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" : printk 461 drivers/media/dvb-frontends/tda10021.c printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n", printk 63 drivers/media/dvb-frontends/tda10023.c printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error (reg == 0x%02x, ret == %i)\n", printk 78 drivers/media/dvb-frontends/tda10023.c printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", printk 124 drivers/media/dvb-frontends/tda10023.c printk("tda10023: lock tuner fails\n"); printk 138 drivers/media/dvb-frontends/tda10023.c printk("tda10023: unlock tuner fails\n"); printk 459 drivers/media/dvb-frontends/tda10023.c printk(sync & 2 ? "DVB: TDA10023(%d): AFC (%d) %dHz\n" : printk 55 drivers/media/dvb-frontends/tda1002x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 69 drivers/media/dvb-frontends/tda1002x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 124 drivers/media/dvb-frontends/tda10048.c printk(KERN_DEBUG "tda10048: " fmt, ## arg);\ printk 223 drivers/media/dvb-frontends/tda10048.c printk("%s: writereg error (ret == %i)\n", __func__, ret); printk 245 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s: readreg error (ret == %i)\n", printk 280 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s(): writereg error err %i\n", printk 398 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s() invalid bandwidth\n", __func__); printk 428 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s() no default\n", __func__); printk 442 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s() Incorrect attach settings\n", printk 479 drivers/media/dvb-frontends/tda10048.c printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n", printk 486 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s: Upload failed. (file not found?)\n", printk 490 drivers/media/dvb-frontends/tda10048.c printk(KERN_INFO "%s: firmware read %zu bytes.\n", printk 497 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s: firmware incorrect size\n", __func__); printk 500 drivers/media/dvb-frontends/tda10048.c printk(KERN_INFO "%s: firmware uploading\n", __func__); printk 552 drivers/media/dvb-frontends/tda10048.c printk(KERN_INFO "%s: firmware uploaded\n", __func__); printk 555 drivers/media/dvb-frontends/tda10048.c printk(KERN_ERR "%s: firmware upload failed\n", __func__); printk 1054 drivers/media/dvb-frontends/tda10048.c printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz is not set (defaulting to %d)\n", printk 1061 drivers/media/dvb-frontends/tda10048.c printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz is not set (defaulting to %d)\n", printk 1068 drivers/media/dvb-frontends/tda10048.c printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz is not set (defaulting to %d)\n", printk 1075 drivers/media/dvb-frontends/tda10048.c printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz is not set (defaulting to %d)\n", printk 72 drivers/media/dvb-frontends/tda10048.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 32 drivers/media/dvb-frontends/tda1004x.c if (debug) printk(KERN_DEBUG "tda1004x: " args); \ printk 331 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda1004x: Error during firmware upload\n"); printk 356 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n"); printk 371 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2); printk 374 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2); printk 389 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); printk 392 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); printk 409 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: firmware upload complete\n"); printk 431 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n"); printk 434 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n"); printk 516 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: trying to boot from eeprom\n"); printk 529 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: waiting for firmware upload...\n"); printk 535 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); printk 538 drivers/media/dvb-frontends/tda1004x.c printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n", printk 543 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n"); printk 609 drivers/media/dvb-frontends/tda1004x.c printk("tda1004x: firmware upload failed\n"); printk 639 drivers/media/dvb-frontends/tda1004x.c printk("tda1004x: firmware upload failed\n"); printk 1276 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "Can't allocate memory for tda10045 state\n"); printk 1288 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n"); printk 1294 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); printk 1346 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "Can't allocate memory for tda10046 state\n"); printk 1358 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n"); printk 1363 drivers/media/dvb-frontends/tda1004x.c printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); printk 117 drivers/media/dvb-frontends/tda1004x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 123 drivers/media/dvb-frontends/tda1004x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 36 drivers/media/dvb-frontends/tda10086.c if (debug) printk(KERN_DEBUG "tda10086: " args); \ printk 168 drivers/media/dvb-frontends/tda10086.c printk("%s: diseqc queue not ready, command may be lost.\n", __func__); printk 43 drivers/media/dvb-frontends/tda10086.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 118 drivers/media/dvb-frontends/tda18271c2dd.c printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr); printk 130 drivers/media/dvb-frontends/tda18271c2dd.c printk(KERN_WARNING printk 577 drivers/media/dvb-frontends/tda18271c2dd.c printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__, printk 605 drivers/media/dvb-frontends/tda18271c2dd.c printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__); printk 993 drivers/media/dvb-frontends/tda18271c2dd.c printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__); printk 12 drivers/media/dvb-frontends/tda18271c2dd.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/tda665x.c printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); printk 53 drivers/media/dvb-frontends/tda665x.c printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); printk 79 drivers/media/dvb-frontends/tda665x.c printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__); printk 85 drivers/media/dvb-frontends/tda665x.c printk(KERN_ERR "%s: I/O Error\n", __func__); printk 100 drivers/media/dvb-frontends/tda665x.c printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", printk 157 drivers/media/dvb-frontends/tda665x.c printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__); printk 165 drivers/media/dvb-frontends/tda665x.c printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", printk 169 drivers/media/dvb-frontends/tda665x.c printk(KERN_ERR "%s: No Phase lock: status=%d\n", printk 175 drivers/media/dvb-frontends/tda665x.c printk(KERN_ERR "%s: I/O Error\n", __func__); printk 226 drivers/media/dvb-frontends/tda665x.c printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); printk 34 drivers/media/dvb-frontends/tda665x.h printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); printk 35 drivers/media/dvb-frontends/tda8083.c if (debug) printk(KERN_DEBUG "tda8083: " args); \ printk 33 drivers/media/dvb-frontends/tda8083.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/dvb-frontends/tda8261.h printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); printk 20 drivers/media/dvb-frontends/tda826x.c if (debug) printk(KERN_DEBUG "tda826x: " args); \ printk 36 drivers/media/dvb-frontends/tda826x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 69 drivers/media/dvb-frontends/ts2020.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 49 drivers/media/dvb-frontends/tua6100.c printk("%s: i2c error\n", __func__); printk 30 drivers/media/dvb-frontends/tua6100.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 56 drivers/media/dvb-frontends/ves1820.c printk("ves1820: %s(): writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", printk 75 drivers/media/dvb-frontends/ves1820.c printk("ves1820: %s(): readreg error (reg == 0x%02x, ret == %i)\n", printk 314 drivers/media/dvb-frontends/ves1820.c printk(sync & 2 ? "ves1820: AFC (%d) %dHz\n" : printk 384 drivers/media/dvb-frontends/ves1820.c printk("ves1820: pwm=0x%02x\n", state->pwm); printk 39 drivers/media/dvb-frontends/ves1820.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 40 drivers/media/dvb-frontends/ves1x93.c #define dprintk if (debug) printk printk 465 drivers/media/dvb-frontends/ves1x93.c printk("ves1x93: Detected ves1893a rev1\n"); printk 473 drivers/media/dvb-frontends/ves1x93.c printk("ves1x93: Detected ves1893a rev2\n"); printk 481 drivers/media/dvb-frontends/ves1x93.c printk("ves1x93: Detected ves1993\n"); printk 37 drivers/media/dvb-frontends/ves1x93.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 54 drivers/media/dvb-frontends/zd1301_demod.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 60 drivers/media/dvb-frontends/zd1301_demod.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 27 drivers/media/dvb-frontends/zl10036.c do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \ printk 68 drivers/media/dvb-frontends/zl10036.c printk(KERN_ERR "%s: i2c read failed at addr=%02x\n", printk 111 drivers/media/dvb-frontends/zl10036.c printk(KERN_CONT " %02x", buf[i]); printk 112 drivers/media/dvb-frontends/zl10036.c printk(KERN_CONT "\n"); printk 118 drivers/media/dvb-frontends/zl10036.c printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret); printk 456 drivers/media/dvb-frontends/zl10036.c printk(KERN_ERR "%s: no config specified", __func__); printk 472 drivers/media/dvb-frontends/zl10036.c printk(KERN_ERR "%s: No zl10036 found\n", __func__); printk 478 drivers/media/dvb-frontends/zl10036.c printk(KERN_ERR "%s: tuner initialization failed\n", printk 490 drivers/media/dvb-frontends/zl10036.c printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n", printk 35 drivers/media/dvb-frontends/zl10036.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 25 drivers/media/dvb-frontends/zl10039.c printk(KERN_DEBUG args); \ printk 99 drivers/media/dvb-frontends/zl10039.c printk(KERN_WARNING printk 21 drivers/media/dvb-frontends/zl10039.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 34 drivers/media/dvb-frontends/zl10353.c if (debug) printk(KERN_DEBUG "zl10353: " args); \ printk 47 drivers/media/dvb-frontends/zl10353.c printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err); printk 78 drivers/media/dvb-frontends/zl10353.c printk("%s: readreg error (reg=%d, ret==%i)\n", printk 96 drivers/media/dvb-frontends/zl10353.c printk(KERN_CONT "\n"); printk 97 drivers/media/dvb-frontends/zl10353.c printk(KERN_DEBUG "%02x:", reg); printk 101 drivers/media/dvb-frontends/zl10353.c printk(KERN_CONT " %02x", (u8)ret); printk 103 drivers/media/dvb-frontends/zl10353.c printk(KERN_CONT " --"); printk 107 drivers/media/dvb-frontends/zl10353.c printk(KERN_CONT "\n"); printk 43 drivers/media/dvb-frontends/zl10353.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 214 drivers/media/firewire/firedtv-avc.c printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n", printk 225 drivers/media/firewire/firedtv-avc.c printk(KERN_INFO "APP PMT -> l=%d\n", length); printk 76 drivers/media/i2c/bt856.c printk(KERN_CONT " %02x", encoder->reg[i]); printk 77 drivers/media/i2c/bt856.c printk(KERN_CONT "\n"); printk 1098 drivers/media/i2c/mt9p031.c printk(KERN_INFO "%s: control initialization error %d\n", printk 922 drivers/media/i2c/mt9t001.c printk(KERN_INFO "%s: control initialization error %d\n", printk 524 drivers/media/i2c/ov7670.c printk(KERN_ERR "Error %d on register write\n", ret); printk 53 drivers/media/i2c/saa6588.c #define dprintk if (debug) printk printk 378 drivers/media/i2c/saa6588.c printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc); printk 295 drivers/media/i2c/tvaudio.c printk(KERN_CONT " 0x%x", cmd->bytes[i]); printk 299 drivers/media/i2c/tvaudio.c printk(KERN_CONT "\n"); printk 1944 drivers/media/i2c/tvaudio.c printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n"); printk 1945 drivers/media/i2c/tvaudio.c printk(KERN_INFO "tvaudio: known chips: "); printk 1947 drivers/media/i2c/tvaudio.c printk(KERN_CONT "%s%s", printk 1949 drivers/media/i2c/tvaudio.c printk(KERN_CONT "\n"); printk 356 drivers/media/mmc/siano/smssdio.c printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n"); printk 357 drivers/media/mmc/siano/smssdio.c printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n"); printk 22 drivers/media/pci/b2c2/flexcop-pci.c do { if ((debug & level)) printk(args); } while (0) printk 64 drivers/media/pci/bt8xx/bt878.c printk(KERN_DEBUG fmt, ##arg); \ printk 136 drivers/media/pci/bt8xx/bt878.c printk(KERN_ERR "bt878: buffer size error!\n"); printk 267 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO printk 278 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO printk 291 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO printk 309 drivers/media/pci/bt8xx/bt878.c printk(KERN_ERR printk 404 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n", printk 407 drivers/media/pci/bt8xx/bt878.c printk(KERN_ERR "bt878: Too many devices inserted\n"); printk 416 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n", printk 437 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ", printk 440 drivers/media/pci/bt8xx/bt878.c printk("irq: %d, latency: %d, memory: 0x%lx\n", printk 455 drivers/media/pci/bt8xx/bt878.c printk(KERN_ERR "bt878(%d): Bad irq number or handler\n", printk 460 drivers/media/pci/bt8xx/bt878.c printk(KERN_ERR printk 472 drivers/media/pci/bt8xx/bt878.c printk(KERN_ERR "bt878: failed to allocate memory!\n"); printk 498 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO "bt878(%d): unloading\n", bt->nr); printk 514 drivers/media/pci/bt8xx/bt878.c printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem); printk 546 drivers/media/pci/bt8xx/bt878.c printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n", printk 31 drivers/media/pci/bt8xx/btcx-risc.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 318 drivers/media/pci/bt8xx/bttvp.h printk(fmt, ##__VA_ARGS__); \ printk 41 drivers/media/pci/bt8xx/dst.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 29 drivers/media/pci/bt8xx/dst_ca.c printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \ printk 31 drivers/media/pci/bt8xx/dst_ca.c printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \ printk 33 drivers/media/pci/bt8xx/dst_ca.c printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \ printk 35 drivers/media/pci/bt8xx/dst_ca.c printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \ printk 38 drivers/media/pci/bt8xx/dst_ca.c printk(format, ## arg); \ printk 35 drivers/media/pci/bt8xx/dvb-bt8xx.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 33 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_INFO "%s: " fmt, "cx18-alsa", ## arg); \ printk 192 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n", printk 199 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_ERR "cx18-alsa cx is NULL\n"); printk 228 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_INFO "cx18-alsa: module loading...\n"); printk 249 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n", printk 270 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_INFO "cx18-alsa: module unloading...\n"); printk 277 drivers/media/pci/cx18/cx18-alsa-main.c printk(KERN_INFO "cx18-alsa: module unload complete\n"); printk 34 drivers/media/pci/cx18/cx18-alsa-pcm.c printk(KERN_INFO "cx18-alsa-pcm %s: " fmt, \ printk 43 drivers/media/pci/cx18/cx18-alsa.h printk(KERN_INFO "%s-alsa: " type ": " fmt, \ printk 54 drivers/media/pci/cx18/cx18-alsa.h printk(KERN_ERR "%s-alsa: " fmt, v4l2_dev->name , ## args) printk 57 drivers/media/pci/cx18/cx18-alsa.h printk(KERN_WARNING "%s-alsa: " fmt, v4l2_dev->name , ## args) printk 60 drivers/media/pci/cx18/cx18-alsa.h printk(KERN_INFO "%s-alsa: " fmt, v4l2_dev->name , ## args) printk 304 drivers/media/pci/cx18/cx18-driver.c printk(KERN_CONT " %02x", eedata[i]); printk 306 drivers/media/pci/cx18/cx18-driver.c printk(KERN_CONT "\n"); printk 898 drivers/media/pci/cx18/cx18-driver.c printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n", printk 912 drivers/media/pci/cx18/cx18-driver.c printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n", printk 1314 drivers/media/pci/cx18/cx18-driver.c printk(KERN_INFO "cx18: Start initialization, version %s\n", printk 1319 drivers/media/pci/cx18/cx18-driver.c printk(KERN_ERR "cx18: Exiting, cx18_first_minor must be between 0 and %d\n", printk 1326 drivers/media/pci/cx18/cx18-driver.c printk(KERN_INFO "cx18: Debug value must be >= 0 and <= 511!\n"); printk 1330 drivers/media/pci/cx18/cx18-driver.c printk(KERN_ERR "cx18: Error detecting PCI card\n"); printk 1333 drivers/media/pci/cx18/cx18-driver.c printk(KERN_INFO "cx18: End initialization\n"); printk 83 drivers/media/pci/cx23885/altera-ci.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 90 drivers/media/pci/cx23885/altera-ci.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 61 drivers/media/pci/cx23885/cimax2.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 49 drivers/media/pci/cx23885/cx23885-417.c printk(KERN_DEBUG pr_fmt("%s: 417:" fmt), \ printk 36 drivers/media/pci/cx23885/cx23885-alsa.c printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt), \ printk 57 drivers/media/pci/cx23885/cx23885-core.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 415 drivers/media/pci/cx23885/cx23885-core.c printk(KERN_DEBUG "0x%08x [ %s", risc, printk 74 drivers/media/pci/cx23885/cx23885-dvb.c printk(KERN_DEBUG pr_fmt("%s dvb: " fmt), \ printk 27 drivers/media/pci/cx23885/cx23885-i2c.c printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \ printk 112 drivers/media/pci/cx23885/cx23885-i2c.c printk(KERN_DEBUG " <W %02x %02x", msg->addr << 1, msg->buf[0]); printk 25 drivers/media/pci/cx23885/cx23885-vbi.c printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt), \ printk 60 drivers/media/pci/cx23885/cx23885-video.c printk(KERN_DEBUG pr_fmt("%s: video:" fmt), \ printk 42 drivers/media/pci/cx25821/cx25821-alsa.c printk(KERN_DEBUG "%s/1: " fmt, chip->dev->name, ##arg); \ printk 1244 drivers/media/pci/cx25821/cx25821-core.c printk(KERN_DEBUG pr_fmt("%s: %s [0x%x]"), name, tag, bits); printk 27 drivers/media/pci/cx25821/cx25821-i2c.c printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \ printk 119 drivers/media/pci/cx25821/cx25821-i2c.c printk(" >\n"); printk 35 drivers/media/pci/cx25821/cx25821-video.h printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \ printk 36 drivers/media/pci/cx88/cx88-alsa.c printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt), \ printk 40 drivers/media/pci/cx88/cx88-blackbird.c printk(KERN_DEBUG pr_fmt("%s: blackbird:" fmt), \ printk 41 drivers/media/pci/cx88/cx88-cards.c printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \ printk 51 drivers/media/pci/cx88/cx88-core.c printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \ printk 56 drivers/media/pci/cx88/cx88-core.c printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \ printk 66 drivers/media/pci/cx88/cx88-dsp.c printk(KERN_DEBUG pr_fmt("%s: dsp:" fmt), \ printk 69 drivers/media/pci/cx88/cx88-dvb.c printk(KERN_DEBUG pr_fmt("%s: dvb:" fmt), \ printk 38 drivers/media/pci/cx88/cx88-i2c.c printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \ printk 58 drivers/media/pci/cx88/cx88-input.c printk(KERN_DEBUG "%s IR: " fmt, ir->core->name, ##arg);\ printk 63 drivers/media/pci/cx88/cx88-input.c printk(KERN_DEBUG "cx88 IR: " fmt, ##arg); \ printk 37 drivers/media/pci/cx88/cx88-mpeg.c printk(KERN_DEBUG pr_fmt("%s: mpeg:" fmt), \ printk 56 drivers/media/pci/cx88/cx88-tvaudio.c printk(KERN_DEBUG pr_fmt("%s: tvaudio:" fmt), \ printk 17 drivers/media/pci/cx88/cx88-vbi.c printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt), \ printk 63 drivers/media/pci/cx88/cx88-video.c printk(KERN_DEBUG pr_fmt("%s: video:" fmt), \ printk 289 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR printk 297 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR printk 304 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "Here is a list of valid choices for the card=<n> insmod option:\n"); printk 306 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "dm1105: card=%d -> %s\n", printk 384 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); printk 394 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); printk 404 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); printk 414 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); printk 425 drivers/media/pci/dm1105/dm1105.c printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); printk 663 drivers/media/pci/dm1105/dm1105.c printk(KERN_INFO "%s: received byte 0x%04x\n", __func__, ircom); printk 25 drivers/media/pci/ivtv/ivtv-alsa-main.c printk(KERN_INFO pr_fmt("%s: alsa:" __fmt), \ printk 117 drivers/media/pci/ivtv/ivtvfb.c printk(KERN_INFO "ivtvfb%d " type ": " fmt, itv->instance , ## args); \ printk 123 drivers/media/pci/ivtv/ivtvfb.c #define IVTVFB_ERR(fmt, args...) printk(KERN_ERR "ivtvfb%d: " fmt, itv->instance , ## args) printk 124 drivers/media/pci/ivtv/ivtvfb.c #define IVTVFB_WARN(fmt, args...) printk(KERN_WARNING "ivtvfb%d: " fmt, itv->instance , ## args) printk 125 drivers/media/pci/ivtv/ivtvfb.c #define IVTVFB_INFO(fmt, args...) printk(KERN_INFO "ivtvfb%d: " fmt, itv->instance , ## args) printk 30 drivers/media/pci/mantis/mantis_common.h printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ printk 32 drivers/media/pci/mantis/mantis_common.h printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ printk 34 drivers/media/pci/mantis/mantis_common.h printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ printk 36 drivers/media/pci/mantis/mantis_common.h printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ printk 38 drivers/media/pci/mantis/mantis_common.h printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ printk 41 drivers/media/pci/mantis/mantis_common.h printk(format , ##arg); \ printk 334 drivers/media/pci/meye/meye.c printk(KERN_WARNING printk 410 drivers/media/pci/meye/meye.c printk(KERN_WARNING "meye: fifo not ready\n"); printk 428 drivers/media/pci/meye/meye.c printk(KERN_WARNING printk 561 drivers/media/pci/meye/meye.c printk(KERN_ERR "meye: need to reset HIC!\n"); printk 566 drivers/media/pci/meye/meye.c printk(KERN_ERR "meye: resetting HIC hanged!\n"); printk 616 drivers/media/pci/meye/meye.c printk(KERN_WARNING "meye: oversized compressed frame %d\n", printk 844 drivers/media/pci/meye/meye.c printk(KERN_ERR "meye: mchip framebuffer allocation failed\n"); printk 1239 drivers/media/pci/meye/meye.c printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); printk 1456 drivers/media/pci/meye/meye.c printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); printk 1600 drivers/media/pci/meye/meye.c printk(KERN_ERR "meye: only one device allowed!\n"); printk 1781 drivers/media/pci/meye/meye.c printk(KERN_INFO "meye: removed\n"); printk 1808 drivers/media/pci/meye/meye.c printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) for capture\n", printk 566 drivers/media/pci/pluto2/pluto2.c printk(KERN_CONT "%c", val & 0xff); printk 571 drivers/media/pci/pluto2/pluto2.c printk(KERN_CONT "\n"); printk 7802 drivers/media/pci/saa7134/saa7134-cards.c printk(KERN_WARNING "%s: Unable to enable IF of the tuner.\n", dev->name); printk 93 drivers/media/pci/saa7134/saa7134-core.c printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \ printk 98 drivers/media/pci/saa7134/saa7134-core.c printk(KERN_DEBUG pr_fmt("irq: " fmt), ## arg); \ printk 33 drivers/media/pci/saa7134/saa7134-i2c.c printk(KERN_DEBUG pr_fmt("i2c: " fmt), ## arg); \ printk 32 drivers/media/pci/saa7134/saa7134-input.c printk(KERN_DEBUG pr_fmt("input: " fmt), ## arg); \ printk 36 drivers/media/pci/saa7134/saa7134-input.c printk(KERN_DEBUG pr_fmt("ir %s: " fmt), ir->rc->device_name, \ printk 27 drivers/media/pci/saa7134/saa7134-ts.c printk(KERN_DEBUG pr_fmt("ts: " fmt), ## arg); \ printk 41 drivers/media/pci/saa7134/saa7134-tvaudio.c printk(KERN_DEBUG pr_fmt("audio: " fmt), ## arg); \ printk 30 drivers/media/pci/saa7134/saa7134-vbi.c printk(KERN_DEBUG pr_fmt("vbi: " fmt), ## arg); \ printk 44 drivers/media/pci/saa7134/saa7134-video.c printk(KERN_DEBUG pr_fmt("video: " fmt), ## arg); \ printk 30 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 32 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_INFO "saa7164[%d]-CPU: %d percent", dev->nr, i->CPULoad); printk 52 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", printk 58 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr, printk 76 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 86 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 108 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() set error, ret = 0x%x\n", __func__, ret); printk 114 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() get error, ret = 0x%x\n", __func__, ret); printk 124 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() commit error, ret = 0x%x\n", printk 130 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() GET commit error, ret = 0x%x\n", printk 134 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() memcmp error, ret = 0x%x\n", printk 145 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() compare failed\n", __func__); printk 168 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 191 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 197 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 212 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 223 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, printk 251 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 257 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 262 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 267 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 272 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 277 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 286 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 349 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 383 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 397 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 434 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 440 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 447 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 452 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 468 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 486 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 491 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 496 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 511 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 517 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 522 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 550 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 564 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n", printk 585 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR printk 600 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 650 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); printk 657 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); printk 779 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s(portnr %d unitid 0x%x) error, ret = 0x%x\n", printk 792 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 1324 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 1338 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); printk 1380 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR printk 1389 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); printk 1402 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); printk 1434 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR printk 1442 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR printk 1451 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); printk 1474 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); printk 1497 drivers/media/pci/saa7164/saa7164-api.c printk(KERN_ERR "%s() error, ret = 0x%x\n", printk 130 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() !msg\n", __func__); printk 139 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", printk 145 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() Missing message buffer\n", __func__); printk 179 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() bus timeout\n", __func__); printk 320 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", printk 326 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR printk 357 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() No message/response found\n", __func__); printk 395 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__); printk 416 drivers/media/pci/saa7164/saa7164-bus.c printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n", printk 699 drivers/media/pci/saa7164/saa7164-cards.c printk(KERN_ERR printk 707 drivers/media/pci/saa7164/saa7164-cards.c printk(KERN_ERR printk 715 drivers/media/pci/saa7164/saa7164-cards.c printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n", printk 719 drivers/media/pci/saa7164/saa7164-cards.c printk(KERN_ERR "%s: card=%d -> %s\n", printk 818 drivers/media/pci/saa7164/saa7164-cards.c printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n", printk 823 drivers/media/pci/saa7164/saa7164-cards.c printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name, printk 96 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR printk 102 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() ret = %x\n", __func__, ret); printk 143 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "found timed out command on the bus\n"); printk 147 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "ret = %x\n", ret); printk 156 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "split response\n"); printk 160 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR " timeout continue\n"); printk 183 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() !msg\n", __func__); printk 206 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() set failed %d\n", __func__, ret); printk 226 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() set last failed %d\n", __func__, ret); printk 293 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n", printk 344 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() Invalid param\n", __func__); printk 361 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() No free sequences\n", __func__); printk 380 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "%s() set command failed %d\n", __func__, ret); printk 404 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "Event timed out\n"); printk 410 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "spurious error\n"); printk 421 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "peek failed\n"); printk 443 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "dequeue failed, ret = %d\n", printk 446 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR printk 461 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "get error(2)\n"); printk 508 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "dequeue(2) failed\n"); printk 526 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "get failed\n"); printk 532 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "dequeue(3) failed\n"); printk 539 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "get failed\n"); printk 551 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "dequeue(3) failed\n"); printk 566 drivers/media/pci/saa7164/saa7164-cmd.c printk(KERN_ERR "dequeue(4) failed\n"); printk 95 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "No pack at 0x%x\n", i); printk 130 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "video cc last = %x current = %x i = %d\n", printk 140 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "audio cc last = %x current = %x i = %d\n", printk 155 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "video pid cc, %d errors\n", port->v_cc_errors); printk 158 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "audio pid cc, %d errors\n", port->a_cc_errors); printk 161 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "sync_errors = %d\n", port->sync_errors); printk 232 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "Histogram named %s (ms, count, last_update_jiffy)\n", hg->name); printk 237 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR " %4d %12d %Ld\n", printk 244 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "Total: %d\n", entries); printk 261 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() illegal i count %d\n", printk 286 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() buf %p guard buffer breach\n", printk 329 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "buf %p bufsize fails match\n", buf); printk 333 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "encirq no free buffers, increase param encoder_buffers\n"); printk 386 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp); printk 404 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp); printk 462 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp); printk 480 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp); printk 618 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() No device specified\n", __func__); printk 856 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "Structure struct tmComResHWDescr is mangled\n"); printk 857 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength, printk 863 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "struct struct tmComResInterfaceDescr is mangled\n"); printk 864 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength, printk 887 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n", printk 995 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n", printk 1017 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_INFO printk 1176 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_WARNING "%s() MSI disabled by module parameter 'enable_msi'" printk 1184 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() Failed to enable MSI interrupt. Falling back to a shared IRQ\n", printk 1195 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() Failed to get an MSI interrupt. Falling back to a shared IRQ\n", printk 1236 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", printk 1246 drivers/media/pci/saa7164/saa7164-core.c printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); printk 1261 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, printk 1286 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR printk 1297 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR printk 1313 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR printk 1334 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() Failed to register dvb adapters on porta\n", printk 1341 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR"%s() Failed to register dvb adapters on portb\n", printk 1348 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR"%s() Failed to register mpeg encoder\n", printk 1355 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR"%s() Failed to register mpeg encoder\n", printk 1362 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR"%s() Failed to register vbi device\n", printk 1369 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR"%s() Failed to register vbi device\n", printk 1380 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() Failed to create debug kernel thread\n", printk 1387 drivers/media/pci/saa7164/saa7164-core.c printk(KERN_ERR "%s() Unsupported board detected, registering without firmware\n", printk 140 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", printk 158 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", printk 176 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", printk 227 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", printk 233 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", printk 244 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", printk 250 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", printk 262 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", printk 268 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", printk 346 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n", printk 374 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n", printk 388 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n", printk 397 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n", printk 413 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n", printk 423 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n", printk 431 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", printk 439 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", printk 446 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n", printk 723 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s: The frontend isn't supported\n", printk 728 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() Frontend initialization failed\n", printk 744 drivers/media/pci/saa7164/saa7164-dvb.c printk(KERN_ERR "%s() Frontend/I2C initialization failed\n", __func__); printk 146 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n", printk 393 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__); printk 450 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, printk 459 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, printk 534 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", printk 552 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", printk 570 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", printk 655 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", printk 661 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", printk 672 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", printk 678 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", printk 690 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", printk 696 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", printk 773 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR printk 808 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() ESPIPE\n", __func__); printk 816 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() EINVAL\n", __func__); printk 829 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() ERESTARTSYS\n", __func__); printk 850 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() copy_to_user failed\n", __func__); printk 852 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() EFAULT\n", __func__); printk 864 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "read() pos > actual, huh?\n"); printk 1008 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n", printk 1080 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_INFO "%s: can't allocate mpeg device\n", printk 1092 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_INFO "%s: can't register mpeg device\n", printk 1100 drivers/media/pci/saa7164/saa7164-encoder.c printk(KERN_INFO "%s: registered device video%d [mpeg]\n", printk 32 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() timeout (no d/l ack)\n", printk 48 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() timeout (no d/l clr)\n", printk 155 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() image corrupt\n", __func__); printk 161 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() device memory corrupt\n", printk 172 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__); printk 178 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() Image booted successfully.\n", __func__); printk 227 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() firmware corrupt\n", printk 232 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() device memory corrupt\n", printk 237 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() no first image\n", printk 244 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 252 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 260 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 286 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 292 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 298 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() no second image\n", printk 305 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 314 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 322 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 366 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 383 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 405 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n", printk 410 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "%s() Upload failed. (file not found?)\n", printk 415 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() firmware read %zu bytes.\n", printk 419 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "saa7164: firmware incorrect size %zu != %u\n", printk 425 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() firmware loaded.\n", __func__); printk 428 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "Firmware file header part 1:\n"); printk 429 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize); printk 430 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize); printk 431 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved); printk 432 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO " .Version = 0x%x\n", hdr->version); printk 442 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n", printk 520 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() FirmwareSize = 0x%x\n", printk 522 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() BSLSize = 0x%x\n", printk 524 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() Reserved = 0x%x\n", printk 526 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_INFO "%s() Version = 0x%x\n", printk 536 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR printk 545 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "starting firmware download(2)\n"); printk 567 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "firmware download failed\n"); printk 570 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "firmware download complete.\n"); printk 575 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "starting firmware download(3)\n"); printk 585 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "firmware download failed\n"); printk 588 drivers/media/pci/saa7164/saa7164-fw.c printk(KERN_ERR "firmware download complete.\n"); printk 102 drivers/media/pci/saa7164/saa7164-i2c.c printk(KERN_ERR "%s: i2c bus %d register FAILED\n", printk 99 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n", printk 218 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", printk 236 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", printk 254 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", printk 340 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() No supported VBI format\n", __func__); printk 348 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", printk 359 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", printk 365 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", printk 377 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", printk 384 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", printk 478 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", printk 512 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() ESPIPE\n", __func__); printk 520 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() EINVAL\n", __func__); printk 533 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() ERESTARTSYS\n", __func__); printk 554 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() copy_to_user failed\n", __func__); printk 556 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() EFAULT\n", __func__); printk 568 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "read() pos > actual, huh?\n"); printk 593 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() EAGAIN\n", __func__); printk 711 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n", printk 724 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_INFO "%s: can't allocate vbi device\n", printk 735 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_INFO "%s: can't register vbi device\n", printk 743 drivers/media/pci/saa7164/saa7164-vbi.c printk(KERN_INFO "%s: registered device vbi%d [vbi]\n", printk 610 drivers/media/pci/saa7164/saa7164.h printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ printk 615 drivers/media/pci/saa7164/saa7164.h printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\ printk 126 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci:cannot set internal volume to maximum:%d\n",ret); printk 131 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: unable to set aspect ratio\n"); printk 135 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: unable to set pan scan\n"); printk 139 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: unable to configure 4:3 wss\n"); printk 142 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: unable to configure 16:9 wss\n"); printk 146 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci:cannot set video mode:%d\n",ret); printk 155 drivers/media/pci/ttpci/av7110.c printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n", printk 170 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n", printk 176 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: adac type set to %d @ card %d\n", printk 184 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci:cannot switch on SCART(Main):%d\n",ret); printk 187 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci:cannot switch on SCART(AD):%d\n",ret); printk 202 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci:cannot set volume :%d\n",ret); printk 259 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n", printk 335 drivers/media/pci/ttpci/av7110.c printk("%s: %lld.%09ld\n", s, (s64)ts.tv_sec, ts.tv_nsec); printk 346 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__); printk 371 drivers/media/pci/ttpci/av7110.c printk("DEBI irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", printk 432 drivers/media/pci/ttpci/av7110.c printk("%s\n", (s8 *) av7110->debi_virt); printk 468 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: GPIO0 irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", printk 473 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "%s: saa7146_wait_for_debi_done timed out\n", __func__); printk 667 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: gpioirq unknown type=%d len=%d\n", printk 807 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: %s error buf %04x %04x %04x %04x ret %d handle %04x\n", printk 837 drivers/media/pci/ttpci/av7110.c printk("%s tried to stop invalid filter %04x, filter type = %x\n", printk 849 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: %s error cmd %04x %04x %04x ret %x resp %04x %04x pid %d\n", printk 1120 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "%s: av7110_fw_request error\n", __func__); printk 1256 drivers/media/pci/ttpci/av7110.c printk("vpeirq: %02x Event Counter 1 0x%04x\n", printk 1359 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: additional demux1 for budget-patch registered\n"); printk 1448 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: this is not an av7110 firmware\n"); printk 1459 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: dpram file is way too big.\n"); printk 1463 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: crc32 of dpram file does not match.\n"); printk 1478 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: root file has strange size (%d). aborting.\n", len); printk 1482 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: crc32 of root file does not match.\n"); printk 1504 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw\n"); printk 1505 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware\n"); printk 1506 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: and can be downloaded from https://linuxtv.org/download/dvb/firmware/\n"); printk 1508 drivers/media/pci/ttpci/av7110.c printk(KERN_ERR "dvb-ttpci: cannot request firmware (error %i)\n", printk 1514 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: this firmware is way too small.\n"); printk 1838 drivers/media/pci/ttpci/av7110.c printk("nexusca: pll transfer failed!\n"); printk 2243 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: LNBP21 not found!\n"); printk 2259 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", printk 2277 drivers/media/pci/ttpci/av7110.c printk("av7110: Frontend registration failed!\n"); printk 2436 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: BUDGET-PATCH DETECTED.\n"); printk 2441 drivers/media/pci/ttpci/av7110.c printk("dvb-ttpci: Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); printk 2494 drivers/media/pci/ttpci/av7110.c printk(KERN_INFO "dvb-ttpci: full-ts mode enabled for saa7146 port B\n"); printk 2670 drivers/media/pci/ttpci/av7110.c printk(KERN_WARNING printk 2708 drivers/media/pci/ttpci/av7110.c printk(KERN_INFO "dvb-ttpci: found av7110-%d.\n", av7110_num); printk 46 drivers/media/pci/ttpci/av7110.h printk(KERN_DEBUG KBUILD_MODNAME ": %s(): " fmt, \ printk 245 drivers/media/pci/ttpci/av7110_av.c printk("resync\n"); printk 1006 drivers/media/pci/ttpci/av7110_av.c printk(KERN_ERR "not audio source memory\n"); printk 49 drivers/media/pci/ttpci/av7110_hw.c printk("%s: invalid count %d\n", __func__, count); printk 53 drivers/media/pci/ttpci/av7110_hw.c printk("%s: wait_for_debi_done failed\n", __func__); printk 72 drivers/media/pci/ttpci/av7110_hw.c printk("%s: invalid count %d\n", __func__, count); printk 76 drivers/media/pci/ttpci/av7110_hw.c printk("%s: wait_for_debi_done #1 failed\n", __func__); printk 87 drivers/media/pci/ttpci/av7110_hw.c printk("%s: wait_for_debi_done #2 failed\n", __func__); printk 149 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at block %d\n", i); printk 164 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at last block\n"); printk 179 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: load_dram(): timeout after last block\n"); printk 185 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: load_dram(): final handshake timeout\n"); printk 223 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: %08x != %08x (check your BIOS 'Plug&Play OS' settings)\n", printk 239 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: Failed to load firmware \"%s\"\n", printk 249 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out\n"); printk 257 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): load_dram() failed\n"); printk 268 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out after loading DRAM\n"); printk 312 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: timeout waiting for MSGSTATE %04x\n", printk 343 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND idle\n", __func__); printk 360 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for HANDSHAKE_REG\n", __func__); printk 399 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: %s QUEUE overflow\n", printk 406 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n", printk 435 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND %d to complete\n", printk 444 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): GPMQOver\n", __func__); printk 448 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): OSDQOver\n", __func__); printk 472 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): av7110_send_fw_cmd error %d\n", printk 486 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_WARNING printk 504 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_fw_cmd error %d\n", ret); printk 527 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret); printk 554 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_fw_request error %d\n", err); printk 564 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __func__); printk 580 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __func__); printk 591 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: GPMQOver\n", __func__); printk 596 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "%s: OSDQOver\n", __func__); printk 614 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_fw_query error %d\n", ret); printk 632 drivers/media/pci/ttpci/av7110_hw.c printk("dvb-ttpci: failed to boot firmware @ card %d\n", printk 643 drivers/media/pci/ttpci/av7110_hw.c printk("dvb-ttpci: info @ card %d: firm %08x, rtsl %08x, vid %08x, app %08x\n", printk 649 drivers/media/pci/ttpci/av7110_hw.c printk("dvb-ttpci: firmware @ card %d supports CI link layer interface\n", printk 652 drivers/media/pci/ttpci/av7110_hw.c printk("dvb-ttpci: no firmware support for CI link layer interface @ card %d\n", printk 683 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: av7110_diseqc_send error %d\n", ret); printk 729 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for BUFF1_BASE == 0\n", printk 756 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for BUFF1_BASE == 0\n", printk 770 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for HANDSHAKE_REG\n", printk 786 drivers/media/pci/ttpci/av7110_hw.c printk(KERN_ERR "dvb-ttpci: WriteText error %d\n", ret); printk 845 drivers/media/pci/ttpci/av7110_hw.c printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", printk 28 drivers/media/pci/ttpci/av7110_ipack.c printk(KERN_WARNING "Couldn't allocate memory for ipack\n"); printk 125 drivers/media/pci/ttpci/budget-ci.c printk("budget_ci: received byte 0x%02x\n", command); printk 166 drivers/media/pci/ttpci/budget-ci.c printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); printk 225 drivers/media/pci/ttpci/budget-ci.c printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); printk 488 drivers/media/pci/ttpci/budget-ci.c printk("budget_ci: CI interface detected, but initialisation failed.\n"); printk 508 drivers/media/pci/ttpci/budget-ci.c printk("budget_ci: CI interface initialised\n"); printk 1361 drivers/media/pci/ttpci/budget-ci.c printk("%s: No LNBP21 found!\n", __func__); printk 1372 drivers/media/pci/ttpci/budget-ci.c printk(KERN_ERR "%s: No tda827x found!\n", __func__); printk 1384 drivers/media/pci/ttpci/budget-ci.c printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); printk 1389 drivers/media/pci/ttpci/budget-ci.c printk(KERN_ERR "%s: No STB6000 found!\n", __func__); printk 1424 drivers/media/pci/ttpci/budget-ci.c printk("%s: No LNBP21 found!\n", __func__); printk 1438 drivers/media/pci/ttpci/budget-ci.c printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", printk 1446 drivers/media/pci/ttpci/budget-ci.c printk("budget-ci: Frontend registration failed!\n"); printk 210 drivers/media/pci/ttpci/budget-core.c printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", printk 467 drivers/media/pci/ttpci/budget-core.c printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); printk 358 drivers/media/pci/ttpci/budget-patch.c printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", printk 365 drivers/media/pci/ttpci/budget-patch.c printk("budget-av: Frontend registration failed!\n"); printk 472 drivers/media/pci/ttpci/budget-patch.c printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); printk 478 drivers/media/pci/ttpci/budget-patch.c printk("budget-patch not detected or saa7146 in non-default state.\n" printk 482 drivers/media/pci/ttpci/budget-patch.c printk("BUDGET-PATCH DETECTED.\n"); printk 530 drivers/media/pci/ttpci/budget.c printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n"); printk 548 drivers/media/pci/ttpci/budget.c printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); printk 564 drivers/media/pci/ttpci/budget.c printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); printk 610 drivers/media/pci/ttpci/budget.c printk("%s: No LNBP21 found!\n", __func__); printk 632 drivers/media/pci/ttpci/budget.c printk("%s: No tda826x found!\n", __func__); printk 635 drivers/media/pci/ttpci/budget.c printk("%s: No LNBP21 found!\n", __func__); printk 685 drivers/media/pci/ttpci/budget.c printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__); printk 689 drivers/media/pci/ttpci/budget.c printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); printk 709 drivers/media/pci/ttpci/budget.c printk(KERN_INFO "budget: Omicom S2 detected\n"); printk 740 drivers/media/pci/ttpci/budget.c printk(KERN_ERR printk 745 drivers/media/pci/ttpci/budget.c printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); printk 754 drivers/media/pci/ttpci/budget.c printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", printk 766 drivers/media/pci/ttpci/budget.c printk("budget: Frontend registration failed!\n"); printk 788 drivers/media/pci/ttpci/budget.c printk("==> failed\n"); printk 27 drivers/media/pci/ttpci/budget.h printk(KERN_DEBUG KBUILD_MODNAME ": %s(): " fmt, \ printk 41 drivers/media/pci/ttpci/dvb_filter.c printk(KERN_DEBUG "Audiostream: AC3"); printk 53 drivers/media/pci/ttpci/dvb_filter.c printk(KERN_CONT " BRate: %d kb/s", (int) ai->bit_rate/1000); printk 59 drivers/media/pci/ttpci/dvb_filter.c printk(KERN_CONT " Freq: %d Hz\n", (int) ai->frequency); printk 65 drivers/media/pci/ttpci/dvb_filter.c printk(KERN_DEBUG " Framesize %d\n", (int) ai->framesize); printk 32 drivers/media/pci/ttpci/ttpci-eeprom.c #define dprintk(x...) do { printk(x); } while (0) printk 904 drivers/media/platform/davinci/dm355_ccdc.c printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); printk 827 drivers/media/platform/davinci/dm644x_ccdc.c printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); printk 1071 drivers/media/platform/davinci/isif.c printk(KERN_NOTICE "%s is registered with vpfe.\n", printk 573 drivers/media/platform/davinci/vpbe.c printk(KERN_ERR "Null device pointers.\n"); printk 708 drivers/media/platform/davinci/vpbe.c printk(KERN_NOTICE "Setting default output to %s\n", def_output); printk 716 drivers/media/platform/davinci/vpbe.c printk(KERN_NOTICE "Setting default mode to %s\n", def_mode); printk 1374 drivers/media/platform/davinci/vpbe_display.c printk(KERN_DEBUG "vpbe_display_probe\n"); printk 169 drivers/media/platform/davinci/vpfe_capture.c printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); printk 194 drivers/media/platform/davinci/vpfe_capture.c printk(KERN_ERR "vpfe capture not initialized\n"); printk 206 drivers/media/platform/davinci/vpfe_capture.c printk(KERN_ERR "ccdc already registered\n"); printk 225 drivers/media/platform/davinci/vpfe_capture.c printk(KERN_ERR "invalid ccdc device ptr\n"); printk 229 drivers/media/platform/davinci/vpfe_capture.c printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", printk 251 drivers/media/platform/davinci/vpss.c printk(KERN_ERR "dm355_enable_clock: Invalid selector: %d\n", printk 335 drivers/media/platform/davinci/vpss.c printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n", printk 52 drivers/media/platform/fsl-viu.c printk(KERN_DEBUG "viu: " fmt , ## arg); \ printk 351 drivers/media/platform/marvell-ccic/cafe-driver.c printk(KERN_ERR "Unable to register cafe i2c adapter\n"); printk 526 drivers/media/platform/marvell-ccic/cafe-driver.c printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n"); printk 599 drivers/media/platform/marvell-ccic/cafe-driver.c printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev); printk 671 drivers/media/platform/marvell-ccic/cafe-driver.c printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n", printk 675 drivers/media/platform/marvell-ccic/cafe-driver.c printk(KERN_ERR "Unable to register cafe_ccic driver\n"); printk 1869 drivers/media/platform/marvell-ccic/mcam-core.c printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n"); printk 1874 drivers/media/platform/marvell-ccic/mcam-core.c printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n", printk 404 drivers/media/platform/marvell-ccic/mmp-driver.c printk(KERN_ERR "mmp_camera leaving devices behind\n"); printk 552 drivers/media/platform/omap/omap_vout.c printk(KERN_ERR VOUT_NAME printk 560 drivers/media/platform/omap/omap_vout.c printk(KERN_ERR VOUT_NAME "failed to change mode\n"); printk 1374 drivers/media/platform/omap/omap_vout.c printk(KERN_ERR VOUT_NAME printk 1728 drivers/media/platform/omap/omap_vout.c printk(KERN_ERR VOUT_NAME ":Could not register Video driver\n"); printk 523 drivers/media/platform/omap3isp/isp.c printk(KERN_CONT "%s ", name[i]); printk 525 drivers/media/platform/omap3isp/isp.c printk(KERN_CONT "\n"); printk 23 drivers/media/platform/s5p-mfc/s5p_mfc_debug.h printk(KERN_DEBUG "%s:%d: " fmt, \ printk 35 drivers/media/platform/s5p-mfc/s5p_mfc_debug.h printk(KERN_ERR "%s:%d: " fmt, \ printk 47 drivers/media/platform/s5p-mfc/s5p_mfc_debug.h printk(KERN_INFO "%s:%d: " fmt, \ printk 1117 drivers/media/platform/via-camera.c printk(KERN_NOTICE "Via camera: serial port is enabled, " \ printk 1119 drivers/media/platform/via-camera.c printk(KERN_NOTICE "Specify override_serial=1 to force " \ printk 1123 drivers/media/platform/via-camera.c printk(KERN_NOTICE "Via camera: overriding serial port\n"); printk 1163 drivers/media/platform/via-camera.c printk(KERN_ERR "viacam: insufficient FB memory reserved\n"); printk 1167 drivers/media/platform/via-camera.c printk(KERN_ERR "viacam: No I/O memory, so no pictures\n"); printk 549 drivers/media/radio/radio-cadet.c printk(KERN_INFO "radio-cadet: PnP reports device at %#x\n", io); printk 330 drivers/media/radio/radio-isa.c printk(KERN_CONT "/0x%03x", drv->io_ports[i]); printk 331 drivers/media/radio/radio-isa.c printk(KERN_CONT ".\n"); printk 163 drivers/media/radio/radio-maxiradio.c printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n"); printk 257 drivers/media/radio/radio-sf16fmi.c printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n"); printk 267 drivers/media/radio/radio-sf16fmi.c printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i); printk 303 drivers/media/radio/radio-sf16fmi.c printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io); printk 307 drivers/media/radio/radio-sf16fmi.c printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io); printk 313 drivers/media/radio/radio-sf16fmi.c printk(KERN_ERR "radio-sf16fmi: no cards found\n"); printk 193 drivers/media/radio/radio-sf16fmr2.c printk(KERN_ERR "radio-sf16fmr2: can't initialize controls\n"); printk 222 drivers/media/radio/radio-sf16fmr2.c printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io); printk 243 drivers/media/radio/radio-sf16fmr2.c printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n"); printk 248 drivers/media/radio/radio-sf16fmr2.c printk(KERN_INFO "radio-sf16fmr2: %s radio card at 0x%x.\n", printk 39 drivers/media/radio/radio-tea5764.c printk(KERN_INFO KBUILD_MODNAME ": "\ printk 42 drivers/media/radio/radio-tea5764.c printk(KERN_WARNING KBUILD_MODNAME ": "\ printk 45 drivers/media/radio/radio-tea5764.c printk(KERN_DEBUG KBUILD_MODNAME ": "\ printk 164 drivers/media/radio/radio-typhoon.c printk(KERN_ERR "%s: You must set a frequency (in kHz) used when muting the card,\n", printk 166 drivers/media/radio/radio-typhoon.c printk(KERN_ERR "%s: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108000)\n", printk 382 drivers/media/radio/saa7706h.c printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err); printk 44 drivers/media/radio/wl128x/fmdrv.h printk(KERN_ERR "fmdrv: " format, ## __VA_ARGS__) printk 46 drivers/media/radio/wl128x/fmdrv.h printk(KERN_WARNING "fmdrv: " format, ##__VA_ARGS__) printk 49 drivers/media/radio/wl128x/fmdrv.h printk(KERN_DEBUG "fmdrv: " format, ## __VA_ARGS__) printk 195 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_INFO "<<%shdr:%02x len:%02x opcode:%02x type:%s dlen:%02x", printk 202 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "\n data(%d): ", cmd_hdr->dlen); printk 205 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "%x ", printk 207 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "%s", (len_org > 14) ? ".." : ""); printk 209 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "\n"); printk 220 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x opcode:%02x type:%s dlen:%02x", printk 227 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "\n data(%d): ", evt_hdr->dlen); printk 230 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "%x ", printk 232 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "%s", (len_org > 14) ? ".." : ""); printk 234 drivers/media/radio/wl128x/fmdrv_common.c printk(KERN_CONT "\n"); printk 139 drivers/media/rc/ati_remote.c #define err(format, arg...) printk(KERN_ERR format , ## arg) printk 25 drivers/media/rc/fintek-cir.h printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) printk 29 drivers/media/rc/fintek-cir.h printk(KERN_DEBUG \ printk 34 drivers/media/rc/fintek-cir.h printk(KERN_DEBUG \ printk 39 drivers/media/rc/fintek-cir.h printk(KERN_DEBUG \ printk 1620 drivers/media/rc/imon.c printk(KERN_INFO "intf%d decoded packet: %*ph\n", printk 1861 drivers/media/rc/imon.c printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte); printk 215 drivers/media/rc/ir-jvc-decoder.c printk(KERN_INFO "IR JVC protocol handler initialized\n"); printk 437 drivers/media/rc/ir-mce_kbd-decoder.c printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n"); printk 263 drivers/media/rc/ir-nec-decoder.c printk(KERN_INFO "IR NEC protocol handler initialized\n"); printk 281 drivers/media/rc/ir-rc5-decoder.c printk(KERN_INFO "IR RC5(x/sz) protocol handler initialized\n"); printk 393 drivers/media/rc/ir-rc6-decoder.c printk(KERN_INFO "IR RC6 protocol handler initialized\n"); printk 220 drivers/media/rc/ir-sanyo-decoder.c printk(KERN_INFO "IR SANYO protocol handler initialized\n"); printk 226 drivers/media/rc/ir-sony-decoder.c printk(KERN_INFO "IR Sony protocol handler initialized\n"); printk 201 drivers/media/rc/ir-xmp-decoder.c printk(KERN_INFO "IR XMP protocol handler initialized\n"); printk 13 drivers/media/rc/ite-cir.h printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) printk 16 drivers/media/rc/ite-cir.h printk(KERN_DEBUG \ printk 22 drivers/media/rc/ite-cir.h printk(KERN_DEBUG \ printk 720 drivers/media/rc/nuvoton-cir.c printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts); printk 722 drivers/media/rc/nuvoton-cir.c printk(KERN_CONT "0x%02x ", nvt->buf[i]); printk 723 drivers/media/rc/nuvoton-cir.c printk(KERN_CONT "\n"); printk 26 drivers/media/rc/nuvoton-cir.h printk(KERN_DEBUG \ printk 31 drivers/media/rc/nuvoton-cir.h printk(KERN_DEBUG \ printk 36 drivers/media/rc/nuvoton-cir.h printk(KERN_DEBUG \ printk 19 drivers/media/rc/rc-loopback.c #define dprintk(x...) if (debug) printk(KERN_INFO DRIVER_NAME ": " x) printk 208 drivers/media/rc/rc-loopback.c printk(KERN_ERR DRIVER_NAME ": rc_dev allocation failed\n"); printk 248 drivers/media/rc/rc-loopback.c printk(KERN_ERR DRIVER_NAME ": rc_dev registration failed\n"); printk 129 drivers/media/rc/rc-main.c printk(KERN_INFO "Registered IR keymap %s\n", map->map.name); printk 14 drivers/media/tuners/fc0013-priv.h #define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) printk 16 drivers/media/tuners/fc0013-priv.h #define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) printk 18 drivers/media/tuners/fc0013-priv.h #define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) printk 27 drivers/media/tuners/fc0013.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 25 drivers/media/tuners/max2165.c printk(KERN_DEBUG "max2165: " args); \ printk 261 drivers/media/tuners/max2165.c printk(KERN_INFO "MAX2165: bandwidth %d Hz not supported.\n", printk 28 drivers/media/tuners/max2165.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 20 drivers/media/tuners/mc44s803.c printk(level "mc44s803: " format , ## arg) printk 26 drivers/media/tuners/mc44s803.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 25 drivers/media/tuners/mt2060.c #define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0) printk 48 drivers/media/tuners/mt2060.c printk(KERN_WARNING "mt2060 I2C read failed\n"); printk 76 drivers/media/tuners/mt2060.c printk(KERN_WARNING "mt2060 I2C write failed\n"); printk 106 drivers/media/tuners/mt2060.c printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n", val_len); printk 431 drivers/media/tuners/mt2060.c printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1); printk 47 drivers/media/tuners/mt2060.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 28 drivers/media/tuners/mt2063.c printk(KERN_DEBUG "mt2063 %s: " fmt, __func__, ## arg); \ printk 263 drivers/media/tuners/mt2063.c printk(KERN_ERR "%s error ret=%d\n", __func__, ret); printk 330 drivers/media/tuners/mt2063.c printk(KERN_ERR "Can't read from address 0x%02x,\n", printk 1792 drivers/media/tuners/mt2063.c printk(KERN_ERR "Can't read mt2063 part ID\n"); printk 1811 drivers/media/tuners/mt2063.c printk(KERN_ERR "mt2063: Unknown mt2063 device ID (0x%02x)\n", printk 1822 drivers/media/tuners/mt2063.c printk(KERN_ERR "mt2063: Unknown part ID (0x%02x%02x)\n", printk 1828 drivers/media/tuners/mt2063.c printk(KERN_INFO "mt2063: detected a mt2063 %s\n", step); printk 2227 drivers/media/tuners/mt2063.c printk(KERN_INFO "%s: Attaching MT2063\n", __func__); printk 2246 drivers/media/tuners/mt2063.c printk(KERN_ERR "%s: Couldn't shutdown\n", __func__); printk 2260 drivers/media/tuners/mt2063.c printk(KERN_ERR "%s: Invalid parameter\n", __func__); printk 23 drivers/media/tuners/mt2063.h printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); printk 20 drivers/media/tuners/mt20xx.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 24 drivers/media/tuners/mt2131.c printk(KERN_INFO "%s: " fmt, "mt2131", ## arg) printk 49 drivers/media/tuners/mt2131.c printk(KERN_WARNING "mt2131 I2C read failed\n"); printk 62 drivers/media/tuners/mt2131.c printk(KERN_WARNING "mt2131 I2C write failed\n"); printk 74 drivers/media/tuners/mt2131.c printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n", printk 263 drivers/media/tuners/mt2131.c printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n", printk 269 drivers/media/tuners/mt2131.c printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n", printk 30 drivers/media/tuners/mt2131.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 45 drivers/media/tuners/mt2266.c #define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2266: " args); printk("\n"); }} while (0) printk 55 drivers/media/tuners/mt2266.c printk(KERN_WARNING "MT2266 I2C read failed\n"); printk 69 drivers/media/tuners/mt2266.c printk(KERN_WARNING "MT2266 I2C write failed\n"); printk 82 drivers/media/tuners/mt2266.c printk(KERN_WARNING "MT2266 I2C write failed (len=%i)\n",(int)len); printk 332 drivers/media/tuners/mt2266.c printk(KERN_INFO "MT2266: successfully identified\n"); printk 23 drivers/media/tuners/mt2266.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 73 drivers/media/tuners/mxl5005s.c printk(arg); \ printk 3862 drivers/media/tuners/mxl5005s.c printk(KERN_WARNING "mxl5005s I2C reset failed\n"); printk 3888 drivers/media/tuners/mxl5005s.c printk(KERN_WARNING "mxl5005s I2C write failed\n"); printk 4108 drivers/media/tuners/mxl5005s.c printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n", printk 116 drivers/media/tuners/mxl5005s.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 24 drivers/media/tuners/mxl5007t.c printk(kern "%s: " fmt "\n", __func__, ##arg) printk 828 drivers/media/tuners/mxl5007t.c printk(KERN_WARNING "%s: unknown rev (%02x)\n", __func__, id); printk 77 drivers/media/tuners/mxl5007t.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 35 drivers/media/tuners/qt1010.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 26 drivers/media/tuners/tda18218.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 717 drivers/media/tuners/tda18271-common.c printk("%s%s: [%d-%04x|%c] %pV", printk 723 drivers/media/tuners/tda18271-common.c printk("%s%s: %pV", level, func, &vaf); printk 122 drivers/media/tuners/tda18271.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 22 drivers/media/tuners/tda827x.c if (debug) printk(KERN_DEBUG "tda827x: " args); \ printk 214 drivers/media/tuners/tda827x.c printk(KERN_ERR "%s: could not write to tuner at addr: 0x%02x\n", printk 642 drivers/media/tuners/tda827x.c printk(KERN_ERR "%s: could not write to tuner at addr: 0x%02x\n", printk 850 drivers/media/tuners/tda827x.c printk("%s: could not read from tuner at addr: 0x%02x\n", printk 51 drivers/media/tuners/tda827x.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 669 drivers/media/tuners/tda8290.c printk(KERN_WARNING "%s: couldn't read register 0x%02x\n", printk 676 drivers/media/tuners/tda8290.c printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n", printk 696 drivers/media/tuners/tda8290.c printk(KERN_WARNING "%s: couldn't read register 0x%02x\n", printk 703 drivers/media/tuners/tda8290.c printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n", printk 39 drivers/media/tuners/tda8290.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 48 drivers/media/tuners/tda8290.h printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", printk 21 drivers/media/tuners/tda9887.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 131 drivers/media/tuners/tea5761.c printk(KERN_INFO "tea5761: Frequency %d.%03d KHz (divider = 0x%04x)\n", printk 269 drivers/media/tuners/tea5761.c printk(KERN_WARNING "it is not a TEA5761. Received %i chars.\n", rc); printk 274 drivers/media/tuners/tea5761.c printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n", printk 278 drivers/media/tuners/tea5761.c printk(KERN_WARNING "tea5761: TEA%02x%02x detected. Manufacturer ID= 0x%02x\n", printk 21 drivers/media/tuners/tea5761.h printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", printk 30 drivers/media/tuners/tea5761.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 40 drivers/media/tuners/tea5767.h printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", printk 49 drivers/media/tuners/tea5767.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 76 drivers/media/tuners/tuner-i2c.h printk(kernlvl "%s %d-%04x: " fmt, i2cprops.name, \ printk 1056 drivers/media/tuners/tuner-simple.c printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n", printk 1076 drivers/media/tuners/tuner-simple.c printk(KERN_WARNING "tuner-simple %d-%04x: unable to probe %s, proceeding anyway.", printk 22 drivers/media/tuners/tuner-simple.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 179 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "BASE "); printk 181 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "INIT1 "); printk 183 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "F8MHZ "); printk 185 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "MTS "); printk 187 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "D2620 "); printk 189 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "D2633 "); printk 191 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "DTV6 "); printk 193 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "QAM "); printk 195 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "DTV7 "); printk 197 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "DTV78 "); printk 199 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "DTV8 "); printk 201 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "FM "); printk 203 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "INPUT1 "); printk 205 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "LCD "); printk 207 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "NOGD "); printk 209 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "MONO "); printk 211 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "ATSC "); printk 213 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "IF "); printk 215 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "LG60 "); printk 217 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "ATI638 "); printk 219 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "OREN538 "); printk 221 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "OREN36 "); printk 223 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "TOYOTA388 "); printk 225 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "TOYOTA794 "); printk 227 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "DIBCOM52 "); printk 229 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "ZARLINK456 "); printk 231 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "CHINA "); printk 233 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "F6MHZ "); printk 235 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "INPUT2 "); printk 237 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "SCODE "); printk 239 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "HAS_IF_%d ", int_freq); printk 378 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT printk 393 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), id %llx, size=%d.\n", printk 441 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), id %016llx.\n", printk 501 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT printk 519 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), id %016llx.\n", printk 560 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), id %016llx.\n", printk 694 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type, printk 746 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), id %016llx, ", new_fw.type, printk 749 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "scode_tbl "); printk 751 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "(%x), ", priv->ctrl.scode_table); printk 753 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "int_freq %d, ", new_fw.int_freq); printk 754 drivers/media/tuners/tuner-xc2028.c printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr); printk 1463 drivers/media/tuners/tuner-xc2028.c printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n"); printk 1469 drivers/media/tuners/tuner-xc2028.c printk(KERN_ERR "xc2028: No frontend!\n"); printk 67 drivers/media/tuners/tuner-xc2028.h printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", printk 53 drivers/media/tuners/xc4000.c printk(KERN_INFO "%s: " fmt, "xc4000", ## arg) printk 247 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n", printk 250 drivers/media/tuners/xc4000.c printk(KERN_ERR "bytes %*ph\n", 4, buf); printk 272 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: reset failed\n"); printk 276 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: no tuner reset callback function, fatal\n"); printk 377 drivers/media/tuners/xc4000.c printk(KERN_ERR printk 543 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: I2C read failed\n"); printk 555 drivers/media/tuners/xc4000.c printk(KERN_CONT "BASE "); printk 557 drivers/media/tuners/xc4000.c printk(KERN_CONT "INIT1 "); printk 559 drivers/media/tuners/xc4000.c printk(KERN_CONT "F8MHZ "); printk 561 drivers/media/tuners/xc4000.c printk(KERN_CONT "MTS "); printk 563 drivers/media/tuners/xc4000.c printk(KERN_CONT "D2620 "); printk 565 drivers/media/tuners/xc4000.c printk(KERN_CONT "D2633 "); printk 567 drivers/media/tuners/xc4000.c printk(KERN_CONT "DTV6 "); printk 569 drivers/media/tuners/xc4000.c printk(KERN_CONT "QAM "); printk 571 drivers/media/tuners/xc4000.c printk(KERN_CONT "DTV7 "); printk 573 drivers/media/tuners/xc4000.c printk(KERN_CONT "DTV78 "); printk 575 drivers/media/tuners/xc4000.c printk(KERN_CONT "DTV8 "); printk 577 drivers/media/tuners/xc4000.c printk(KERN_CONT "FM "); printk 579 drivers/media/tuners/xc4000.c printk(KERN_CONT "INPUT1 "); printk 581 drivers/media/tuners/xc4000.c printk(KERN_CONT "LCD "); printk 583 drivers/media/tuners/xc4000.c printk(KERN_CONT "NOGD "); printk 585 drivers/media/tuners/xc4000.c printk(KERN_CONT "MONO "); printk 587 drivers/media/tuners/xc4000.c printk(KERN_CONT "ATSC "); printk 589 drivers/media/tuners/xc4000.c printk(KERN_CONT "IF "); printk 591 drivers/media/tuners/xc4000.c printk(KERN_CONT "LG60 "); printk 593 drivers/media/tuners/xc4000.c printk(KERN_CONT "ATI638 "); printk 595 drivers/media/tuners/xc4000.c printk(KERN_CONT "OREN538 "); printk 597 drivers/media/tuners/xc4000.c printk(KERN_CONT "OREN36 "); printk 599 drivers/media/tuners/xc4000.c printk(KERN_CONT "TOYOTA388 "); printk 601 drivers/media/tuners/xc4000.c printk(KERN_CONT "TOYOTA794 "); printk 603 drivers/media/tuners/xc4000.c printk(KERN_CONT "DIBCOM52 "); printk 605 drivers/media/tuners/xc4000.c printk(KERN_CONT "ZARLINK456 "); printk 607 drivers/media/tuners/xc4000.c printk(KERN_CONT "CHINA "); printk 609 drivers/media/tuners/xc4000.c printk(KERN_CONT "F6MHZ "); printk 611 drivers/media/tuners/xc4000.c printk(KERN_CONT "INPUT2 "); printk 613 drivers/media/tuners/xc4000.c printk(KERN_CONT "SCODE "); printk 615 drivers/media/tuners/xc4000.c printk(KERN_CONT "HAS_IF_%d ", int_freq); printk 626 drivers/media/tuners/xc4000.c printk(KERN_ERR "Error! firmware not loaded\n"); printk 663 drivers/media/tuners/xc4000.c printk(KERN_WARNING printk 674 drivers/media/tuners/xc4000.c printk(KERN_DEBUG "%s firmware for type=", printk 677 drivers/media/tuners/xc4000.c printk(KERN_DEBUG "(%x), id %016llx.\n", type, (unsigned long long)*id); printk 736 drivers/media/tuners/xc4000.c printk(KERN_ERR "Error: firmware %s not found.\n", fname); printk 738 drivers/media/tuners/xc4000.c printk(KERN_ERR "Error %d while requesting firmware %s\n", printk 749 drivers/media/tuners/xc4000.c printk(KERN_ERR "Error: firmware file %s has invalid size!\n", printk 770 drivers/media/tuners/xc4000.c printk(KERN_ERR "Not enough memory to load firmware file.\n"); printk 784 drivers/media/tuners/xc4000.c printk(KERN_ERR "More firmware images in file than were expected!\n"); printk 809 drivers/media/tuners/xc4000.c printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%zd, expected %d)\n", printk 817 drivers/media/tuners/xc4000.c printk(KERN_ERR "Not enough memory to load firmware file.\n"); printk 823 drivers/media/tuners/xc4000.c printk(KERN_DEBUG "Reading firmware type "); printk 825 drivers/media/tuners/xc4000.c printk(KERN_DEBUG "(%x), id %llx, size=%d.\n", printk 838 drivers/media/tuners/xc4000.c printk(KERN_ERR "Firmware file is incomplete!\n"); printk 845 drivers/media/tuners/xc4000.c printk(KERN_ERR "Firmware header is incomplete!\n"); printk 848 drivers/media/tuners/xc4000.c printk(KERN_ERR "Error: firmware file is corrupted!\n"); printk 893 drivers/media/tuners/xc4000.c printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type, printk 903 drivers/media/tuners/xc4000.c printk(KERN_ERR "failed to put device into direct mode!\n"); printk 911 drivers/media/tuners/xc4000.c printk(KERN_ERR "Failed to set scode %d\n", rc); printk 952 drivers/media/tuners/xc4000.c printk(KERN_CONT "(%x), id %016llx, ", new_fw.type, printk 955 drivers/media/tuners/xc4000.c printk(KERN_CONT "scode_tbl "); printk 957 drivers/media/tuners/xc4000.c printk(KERN_CONT "int_freq %d, ", new_fw.int_freq); printk 958 drivers/media/tuners/xc4000.c printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr); printk 979 drivers/media/tuners/xc4000.c printk(KERN_ERR "Error %d while loading base firmware\n", rc); printk 1030 drivers/media/tuners/xc4000.c printk(KERN_ERR "Unable to read tuner registers.\n"); printk 1036 drivers/media/tuners/xc4000.c printk(KERN_ERR "Unable to read tuner registers.\n"); printk 1045 drivers/media/tuners/xc4000.c printk(KERN_WARNING printk 1059 drivers/media/tuners/xc4000.c printk(KERN_WARNING printk 1193 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000 delivery system not supported!\n"); printk 1211 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n", printk 1222 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n"); printk 1242 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: setting registers failed\n"); printk 1404 drivers/media/tuners/xc4000.c printk(KERN_ERR printk 1423 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n"); printk 1437 drivers/media/tuners/xc4000.c printk(KERN_ERR "xc4000: setting registers failed\n"); printk 1590 drivers/media/tuners/xc4000.c printk(KERN_ERR printk 1706 drivers/media/tuners/xc4000.c printk(KERN_INFO printk 1709 drivers/media/tuners/xc4000.c printk(KERN_INFO printk 1713 drivers/media/tuners/xc4000.c printk(KERN_INFO printk 1716 drivers/media/tuners/xc4000.c printk(KERN_INFO printk 1720 drivers/media/tuners/xc4000.c printk(KERN_ERR printk 48 drivers/media/tuners/xc4000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 37 drivers/media/tuners/xc5000.c printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) printk 250 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len); printk 266 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len); printk 285 drivers/media/tuners/xc5000.c printk(KERN_WARNING "xc5000: I2C read failed\n"); printk 307 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: reset failed\n"); printk 311 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n"); printk 438 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 618 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: firmware upload failed...\n"); printk 691 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 701 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n"); printk 707 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", printk 778 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000 bandwidth not set!\n"); printk 804 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: delivery system is not supported!\n"); printk 906 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 916 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n"); printk 938 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: Unable to reload fw\n"); printk 990 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n"); printk 996 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1134 drivers/media/tuners/xc5000.c printk(KERN_CONT " - retrying to upload firmware.\n"); printk 1144 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1150 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1160 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: Can't request self-calibration."); printk 1173 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1179 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1193 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1203 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: can't set to cable mode."); printk 1208 drivers/media/tuners/xc5000.c printk(KERN_INFO "xc5000: Firmware %s loaded and running.\n", printk 1211 drivers/media/tuners/xc5000.c printk(KERN_CONT " - too many retries. Giving up\n"); printk 1230 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1262 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 1289 drivers/media/tuners/xc5000.c printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); printk 1431 drivers/media/tuners/xc5000.c printk(KERN_INFO printk 1434 drivers/media/tuners/xc5000.c printk(KERN_INFO printk 1438 drivers/media/tuners/xc5000.c printk(KERN_INFO printk 1441 drivers/media/tuners/xc5000.c printk(KERN_INFO printk 1445 drivers/media/tuners/xc5000.c printk(KERN_ERR printk 55 drivers/media/tuners/xc5000.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 242 drivers/media/usb/au0828/au0828-video.c printk("unable to allocate %i bytes for transfer buffer %i%s\n", printk 359 drivers/media/usb/au0828/au0828.h printk(KERN_DEBUG pr_fmt(fmt), ## arg);\ printk 19 drivers/media/usb/b2c2/flexcop-usb.c do { if ((debug & level)) printk(args); } while (0) printk 461 drivers/media/usb/cpia2/cpia2.h #define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args) printk 466 drivers/media/usb/cpia2/cpia2.h #define ALOG(fmt,args...) printk(fmt,##args) printk 472 drivers/media/usb/cpia2/cpia2.h #define KINFO(fmt, args...) printk(KERN_INFO fmt,##args) printk 916 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_ERR "cpia2: failed to load VP patch \"%s\"\n", printk 1908 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "System Device Hi = 0x%X\n", printk 1910 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "System Device Lo = 0x%X\n", printk 1912 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "System_system control = 0x%X\n", printk 1920 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "ASIC_ID = 0x%X\n", printk 1922 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "ASIC_REV = 0x%X\n", printk 1924 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "PW_CONTRL = 0x%X\n", printk 1926 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "WAKEUP = 0x%X\n", printk 1932 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "Stream ctrl = 0x%X\n", printk 1937 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "Stream status = 0x%X\n", printk 1943 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "USB_CTRL = 0x%X\n", printk 1945 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "USB_STRM = 0x%X\n", printk 1947 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "USB_STATUS = 0x%X\n", printk 1953 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "USB settings = 0x%X\n", printk 1959 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC Control = 0x%0X\n", printk 1961 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC Format = 0x%0X\n", printk 1963 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC Clocks = 0x%0X\n", printk 1965 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC IHSize = 0x%0X\n", printk 1967 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC Xlim Hi = 0x%0X\n", printk 1969 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC XLim Lo = 0x%0X\n", printk 1971 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC YLim Hi = 0x%0X\n", printk 1973 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC YLim Lo = 0x%0X\n", printk 1975 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC OHSize = 0x%0X\n", printk 1977 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC OVSize = 0x%0X\n", printk 1979 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC HCrop = 0x%0X\n", printk 1981 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC VCrop = 0x%0X\n", printk 1983 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC HPhase = 0x%0X\n", printk 1985 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC VPhase = 0x%0X\n", printk 1987 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC HIspan = 0x%0X\n", printk 1989 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC VIspan = 0x%0X\n", printk 1991 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC HiCrop = 0x%0X\n", printk 1993 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC ViCrop = 0x%0X\n", printk 1995 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC HiFract = 0x%0X\n", printk 1997 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC ViFract = 0x%0X\n", printk 1999 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC JPeg Opt = 0x%0X\n", printk 2001 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC Creep Per = 0x%0X\n", printk 2003 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC User Sq. = 0x%0X\n", printk 2005 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VC Target KB = 0x%0X\n", printk 2014 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Dev Hi = 0x%0X\n", printk 2016 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Dev Lo = 0x%0X\n", printk 2018 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Sys State = 0x%0X\n", printk 2020 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Sys Ctrl = 0x%0X\n", printk 2022 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Sensor flg = 0x%0X\n", printk 2024 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Sensor Rev = 0x%0X\n", printk 2026 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Dev Config = 0x%0X\n", printk 2028 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP GPIO_DIR = 0x%0X\n", printk 2030 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP GPIO_DATA = 0x%0X\n", printk 2032 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Ram ADDR H = 0x%0X\n", printk 2034 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Ram ADDR L = 0x%0X\n", printk 2036 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP RAM Data = 0x%0X\n", printk 2038 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "Do Call = 0x%0X\n", printk 2045 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n", printk 2047 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n", printk 2049 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n", printk 2051 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Framerate = 0x%0X\n", printk 2053 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP UserEffect = 0x%0X\n", printk 2055 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP White Bal = 0x%0X\n", printk 2057 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP WB thresh = 0x%0X\n", printk 2059 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Exp Modes = 0x%0X\n", printk 2061 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Exp Target = 0x%0X\n", printk 2067 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP FlickerMds = 0x%0X\n", printk 2073 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n", printk 2075 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n", printk 2077 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n", printk 2079 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP Framerate = 0x%0X\n", printk 2081 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP UserEffect = 0x%0X\n", printk 2087 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP5 Exp Target= 0x%0X\n", printk 2093 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP5 MY Black = 0x%0X\n", printk 2095 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP5 MCY Range = 0x%0X\n", printk 2097 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP5 MYCEILING = 0x%0X\n", printk 2099 drivers/media/usb/cpia2/cpia2_core.c printk(KERN_DEBUG "VP5 MCUV Sat = 0x%0X\n", printk 83 drivers/media/usb/cx231xx/cx231xx-417.c printk(KERN_DEBUG pr_fmt(fmt), ## arg); \ printk 30 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_INFO "%s %s :"fmt, \ printk 43 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_INFO "%s %s :"fmt, \ printk 232 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_DEBUG "%s: (pipe 0x%08x): %s: %02x %02x %02x %02x %02x %02x %02x %02x ", printk 242 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_CONT ">>>"); printk 244 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_CONT " %02x", printk 261 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_CONT "FAILED!\n"); printk 266 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_CONT "<<<"); printk 268 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_CONT " %02x", printk 271 drivers/media/usb/cx231xx/cx231xx-core.c printk(KERN_CONT "\n"); printk 33 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(fmt, ##args); \ printk 40 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_DEBUG "%s at %s: " fmt, \ printk 389 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_CONT " %02x", msgs[i].buf[byte]); printk 397 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_CONT " %02x", msgs[i].buf[byte]); printk 398 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_CONT "\n"); printk 409 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_CONT " %02x", msgs[i+1].buf[byte]); printk 416 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_CONT " %02x", msgs[i].buf[byte]); printk 423 drivers/media/usb/cx231xx/cx231xx-i2c.c printk(KERN_CONT "\n"); printk 41 drivers/media/usb/cx231xx/cx231xx-video.c printk(KERN_INFO "%s %s :"fmt, \ printk 51 drivers/media/usb/cx231xx/cx231xx-video.c printk(KERN_INFO "%s %s :"fmt, \ printk 116 drivers/media/usb/dvb-usb-v2/az6007.c printk(KERN_DEBUG "az6007: IN req: %02x, value: %04x, index: %04x\n", printk 147 drivers/media/usb/dvb-usb-v2/az6007.c printk(KERN_DEBUG "az6007: OUT req: %02x, value: %04x, index: %04x\n", printk 770 drivers/media/usb/dvb-usb-v2/az6007.c printk(KERN_DEBUG "az6007: I2C W/R addr=0x%x len=%d/%d\n", printk 788 drivers/media/usb/dvb-usb-v2/az6007.c printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n", printk 802 drivers/media/usb/dvb-usb-v2/az6007.c printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n", printk 30 drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 60 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 957 drivers/media/usb/dvb-usb-v2/mxl111sf.c printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", printk 124 drivers/media/usb/dvb-usb-v2/mxl111sf.h printk(kern "%s: " fmt "\n", __func__, ##arg) printk 813 drivers/media/usb/dvb-usb/af9005.c printk("EEPROM DUMP\n"); printk 816 drivers/media/usb/dvb-usb/af9005.c debug_dump(buf, 8, printk); printk 3661 drivers/media/usb/dvb-usb/dib0700_devices.c printk(KERN_ERR "Could not reach tuner i2c bus\n"); printk 32 drivers/media/usb/dvb-usb/dvb-usb.h do { if ((var & level)) { printk(args); } } while (0) printk 54 drivers/media/usb/dvb-usb/dvb-usb.h #define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) printk 56 drivers/media/usb/dvb-usb/dvb-usb.h #define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) printk 58 drivers/media/usb/dvb-usb/dvb-usb.h #define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) printk 40 drivers/media/usb/dvb-usb/m920x.c printk(KERN_INFO "m920x_read = error: %d\n", ret); printk 101 drivers/media/usb/dvb-usb/m920x.c printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n"); printk 66 drivers/media/usb/dvb-usb/pctv452e.c printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ printk 50 drivers/media/usb/dvb-usb/ttusb2.c printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ printk 586 drivers/media/usb/dvb-usb/ttusb2.c printk(KERN_ERR "%s: No tda827x found!\n", __func__); printk 73 drivers/media/usb/pwc/pwc.h printk(KERN_DEBUG PFX fmt, ##args); \ printk 76 drivers/media/usb/pwc/pwc.h #define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args) printk 77 drivers/media/usb/pwc/pwc.h #define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args) printk 78 drivers/media/usb/pwc/pwc.h #define PWC_INFO(fmt, args...) printk(KERN_INFO PFX fmt, ##args) printk 83 drivers/media/usb/pwc/pwc.h #define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args) printk 84 drivers/media/usb/pwc/pwc.h #define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args) printk 85 drivers/media/usb/pwc/pwc.h #define PWC_INFO(fmt, args...) printk(KERN_INFO PFX fmt, ##args) printk 582 drivers/media/usb/siano/smsusb.c printk(KERN_INFO "%s Entering status %d.\n", __func__, msg.event); printk 595 drivers/media/usb/siano/smsusb.c printk(KERN_INFO "%s Entering.\n", __func__); printk 600 drivers/media/usb/siano/smsusb.c printk(KERN_INFO "endpoint %d %02x %02x %d\n", i, printk 610 drivers/media/usb/siano/smsusb.c printk(KERN_INFO "%s usb_set_interface failed, rc %d\n", printk 27 drivers/media/usb/stk1160/stk1160-i2c.c printk(KERN_DEBUG fmt, ##args); \ printk 55 drivers/media/usb/stk1160/stk1160.h printk(KERN_DEBUG "stk1160: " fmt, ## args) printk 30 drivers/media/usb/tm6000/tm6000-alsa.c printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \ printk 865 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_ERR "Error %i doing tuner reset\n", rc); printk 873 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_ERR "Error %i doing tuner reset\n", rc); printk 878 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_ERR "Tuner reset is not configured\n"); printk 941 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "Setting firmware parameters for xc2028\n"); printk 964 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n"); printk 1032 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "Device has eeprom but is currently unknown\n"); printk 1038 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n", printk 1162 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", printk 1191 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); printk 1244 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", printk 1294 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", printk 1302 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); printk 1310 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); printk 1321 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_ERR "tm6000: Error %d while registering\n", rc); printk 1342 drivers/media/usb/tm6000/tm6000-cards.c printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); printk 45 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_DEBUG "(dev %p, pipe %08x): ", dev->udev, pipe); printk 47 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT "%s: %02x %02x %02x %02x %02x %02x %02x %02x ", printk 53 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT ">>> "); printk 55 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT " %02x", buf[i]); printk 56 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT "\n"); printk 69 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_DEBUG "<<< (len=%d)\n", len); printk 71 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT "%s: Error #%d\n", __func__, ret); printk 73 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT "<<< "); printk 75 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT " %02x", buf[i]); printk 76 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_CONT "\n"); printk 564 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "Found tm6000\n"); printk 569 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "Found tm6010\n"); printk 574 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "Unknown board version = 0x%08x\n", board); printk 577 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_ERR "Error %i while retrieving board version\n", board); printk 591 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", printk 671 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "%s: audio input doesn't support\n", printk 693 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "%s: audio input doesn't support\n", printk 750 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", printk 810 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", printk 874 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "%s: Initialized (%s) extension\n", printk 890 drivers/media/usb/tm6000/tm6000-core.c printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name); printk 97 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: error %s\n", __func__); printk 111 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "tm6000: got start stream request %s\n", __func__); printk 142 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n", printk 146 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: pipe reset\n"); printk 153 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n", printk 170 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "urb killing\n"); printk 172 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "urb buffer free\n"); printk 184 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "tm6000: got start feed request %s\n", __func__); printk 204 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__); printk 208 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "stream %#x\n", dvb->streams); printk 211 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "stop stream\n"); printk 237 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: no frontend defined for the device!\n"); printk 258 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: couldn't attach the frontend!\n"); printk 282 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR printk 288 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: couldn't register frontend (xc3028)\n"); printk 292 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "tm6000: XC2028/3028 asked to be attached to frontend!\n"); printk 303 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR printk 309 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: couldn't register frontend (xc5000)\n"); printk 313 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "tm6000: XC5000 asked to be attached to frontend!\n"); printk 318 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: no frontend found\n"); printk 330 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: dvb_dmx_init failed (errno = %d)\n", ret); printk 340 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_ERR "tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret); printk 397 drivers/media/usb/tm6000/tm6000-dvb.c printk(KERN_INFO "This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)\n"); printk 28 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_DEBUG "%s at %s: " fmt, \ printk 44 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n", printk 78 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n", printk 169 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " %02x", msgs[i].buf[byte]); printk 191 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " %02x", msgs[i].buf[byte]); printk 196 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " %02x", msgs[i].buf[byte]); printk 201 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT "\n"); printk 229 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_WARNING printk 238 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i); printk 239 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " %02x", dev->eedata[i]); printk 249 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " %s\n", bytes); printk 255 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " "); printk 256 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_CONT " %s\n", bytes); printk 262 drivers/media/usb/tm6000/tm6000-i2c.c printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", printk 39 drivers/media/usb/tm6000/tm6000-input.c printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ printk 192 drivers/media/usb/tm6000/tm6000-input.c printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n", printk 266 drivers/media/usb/tm6000/tm6000-input.c printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n", printk 453 drivers/media/usb/tm6000/tm6000-stds.c printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", printk 1645 drivers/media/usb/tm6000/tm6000-video.c printk(KERN_INFO "%s: can't register video device\n", printk 1650 drivers/media/usb/tm6000/tm6000-video.c printk(KERN_INFO "%s: registered device %s\n", printk 1661 drivers/media/usb/tm6000/tm6000-video.c printk(KERN_INFO "%s: can't register radio device\n", printk 1666 drivers/media/usb/tm6000/tm6000-video.c printk(KERN_INFO "%s: registered device %s\n", printk 1670 drivers/media/usb/tm6000/tm6000-video.c printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret); printk 384 drivers/media/usb/tm6000/tm6000.h printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \ printk 395 drivers/media/usb/tm6000/tm6000.h printk(KERN_ERR "tm6000 %s :"fmt, \ printk 62 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c #define dprintk(x...) do { if (debug) printk(KERN_DEBUG x); } while (0) printk 140 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_DEBUG ">"); printk 142 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_CONT " %02x", data[i]); printk 143 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_CONT "\n"); printk 168 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: failed, receive error %d\n", __func__, printk 176 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_DEBUG "<"); printk 178 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_CONT " %02x", ttusb->last_result[i]); printk 179 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_CONT "\n"); printk 295 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_ERR "ttusb-budget: failed to request firmware\n"); printk 444 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk printk 462 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: dsp-version: %c%c%c\n", __func__, printk 570 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: muxpack with incorrect checksum, ignoring\n", printk 579 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: cc discontinuity (%d frames missing)\n", printk 601 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("cc: %04x\n", (data[0] << 8) | data[1]); printk 620 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("illegal muxpack type %02x\n", muxpack[0]); printk 630 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: too much work\n", __func__); printk 646 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk(KERN_INFO "%s: lost sync.\n", printk 756 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: status %d, errcount == %d, length == %i\n", printk 833 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("%s: iso xfer already running!\n", __func__); printk 867 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk printk 1429 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n"); printk 1438 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n"); printk 1615 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("dvb-ttusb-budget: A frontend driver was not found for device [%04x:%04x]\n", printk 1620 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("dvb-ttusb-budget: Frontend registration failed!\n"); printk 1669 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("ttusb_init_controller: error\n"); printk 1714 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result); printk 1725 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n", printk 1732 drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c printk("ttusb_dvb: dvb_net_init failed!\n"); printk 42 drivers/media/usb/ttusb-dec/ttusb_dec.c #define dprintk if (debug) printk printk 296 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s - usb_commit_urb failed with result: %d\n", printk 328 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: Failed to lock usb mutex.\n", __func__); printk 341 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_DEBUG "%s: command: %*ph\n", printk 349 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: command bulk message failed: error %d\n", printk 360 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: result bulk message failed: error %d\n", printk 367 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_DEBUG "%s: result: %*ph\n", printk 465 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: packet too short - discarding\n", __func__); printk 470 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: packet too long - discarding\n", __func__); printk 553 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: unknown PVA type: %02x.\n", __func__, printk 592 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: odd sized packet - discarding\n", __func__); printk 600 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: checksum failed - discarding\n", __func__); printk 608 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: warning: lost packets between %u and %u\n", printk 692 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: unknown packet type: %02x%02x\n", printk 764 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: illegal packet state encountered.\n", printk 945 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: failed urb submission %d: error %d\n", printk 1247 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: usb_submit_urb failed\n",__func__); printk 1328 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_ERR "%s: Firmware (%s) unavailable.\n", printk 1337 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: firmware size too small for DSP code (%zu < 60).\n", printk 1350 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: crc32 check of DSP code failed (calculated 0x%08x != 0x%08x in file), file invalid.\n", printk 1357 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_INFO "ttusb_dec: found DSP code \"%s\".\n", idstring); printk 1427 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_INFO "ttusb_dec: no version info in Firmware\n"); printk 1429 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_INFO "ttusb_dec: Firmware %x.%02x%c%c\n", printk 1453 drivers/media/usb/ttusb-dec/ttusb_dec.c printk(KERN_ERR "%s: unknown model returned by firmware (%08x) - please report\n", printk 1473 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: dvb_register_adapter failed: error %d\n", printk 1489 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: dvb_dmx_init failed: error %d\n", __func__, printk 1502 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: dvb_dmxdev_init failed: error %d\n", printk 1515 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: dvb_dmx_init failed: error %d\n", __func__, printk 1527 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: dvb_dmx_init failed: error %d\n", __func__, printk 1655 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("%s: couldn't allocate memory.\n", __func__); printk 1700 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("dvb-ttusb-dec: A frontend driver was not found for device [%04x:%04x]\n", printk 1705 drivers/media/usb/ttusb-dec/ttusb_dec.c printk("budget-ci: Frontend registration failed!\n"); printk 52 drivers/media/usb/ttusb-dec/ttusbdecfe.c printk(KERN_ERR "%s: unexpected reply\n", __func__); printk 63 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ printk 150 drivers/media/usb/usbvision/usbvision-core.c printk("%s\n", tmp); printk 156 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_CONT "%s\n", tmp); printk 1250 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen); printk 1627 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "usbvision: unknown video format %02x, using default YUV420", printk 1640 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - reconnect or reload driver.\n", printk 1874 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", printk 1905 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", printk 1944 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", printk 2010 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", printk 2184 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "usbvision_audio_off: can't write reg\n"); printk 2196 drivers/media/usb/usbvision/usbvision-core.c printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n"); printk 34 drivers/media/usb/usbvision/usbvision-i2c.c printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ printk 190 drivers/media/usb/usbvision/usbvision-i2c.c printk(KERN_ERR "usbvision_i2c_register: can't write reg\n"); printk 317 drivers/media/usb/usbvision/usbvision-i2c.c printk(KERN_ERR printk 70 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ printk 403 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO "%s: Final disconnect\n", __func__); printk 1128 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO "%s: Final disconnect\n", __func__); printk 1276 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n", printk 1287 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n", printk 1432 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO "%s: %s found\n", __func__, printk 1584 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO "%s: In use, disconnect pending\n", printk 1628 drivers/media/usb/usbvision/usbvision-video.c printk(KERN_INFO DRIVER_DESC " : " USBVISION_VERSION_STRING "\n"); printk 1990 drivers/media/usb/uvc/uvc_ctrl.c printk(KERN_INFO "restoring control %pUl/%u/%u\n", printk 1418 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " <- XU %d", entity->id); printk 1430 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " <- PU %d", entity->id); printk 1443 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " <- SU %d", entity->id); printk 1462 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " <- IT %d\n", entity->id); printk 1470 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " OT %d", entity->id); printk 1477 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " <- IT %d\n", entity->id); printk 1480 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " OT %d", entity->id); printk 1530 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " (->"); printk 1532 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " XU %d", forward->id); printk 1550 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " (->"); printk 1552 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " OT %d", forward->id); printk 1559 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT ")"); printk 1585 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " <- IT"); printk 1606 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT " %d", term->id); printk 1613 drivers/media/usb/uvc/uvc_driver.c printk(KERN_CONT "\n"); printk 2944 drivers/media/usb/uvc/uvc_driver.c printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n"); printk 725 drivers/media/usb/uvc/uvcvideo.h printk(KERN_DEBUG "uvcvideo: " msg); \ printk 731 drivers/media/usb/uvc/uvcvideo.h printk(KERN_INFO "uvcvideo: " msg); \ printk 735 drivers/media/usb/uvc/uvcvideo.h printk(level "uvcvideo: " msg) printk 54 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_INFO KBUILD_MODNAME " " fmt, ##args); \ printk 499 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_DEBUG KBUILD_MODNAME ": unknown format?\n"); printk 503 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_ERR KBUILD_MODNAME ": =======no frame\n"); printk 962 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_ERR KBUILD_MODNAME ": no context!\n"); printk 968 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_ERR KBUILD_MODNAME ": no context!\n"); printk 1040 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_ERR KBUILD_MODNAME ": start read pipe failed\n"); printk 1052 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_ERR KBUILD_MODNAME ": invalid device\n"); printk 1358 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_INFO KBUILD_MODNAME ": out of memory. Using less frames\n"); printk 1364 drivers/media/usb/zr364xx/zr364xx.c printk(KERN_INFO KBUILD_MODNAME ": out of memory. Aborting\n"); printk 94 drivers/media/v4l2-core/tuner-core.c printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg); \ printk 195 drivers/media/v4l2-core/tuner-core.c printk(KERN_ERR "TUNER: Unable to find " \ printk 23 drivers/media/v4l2-core/v4l2-ctrls.c printk(KERN_DEBUG pr_fmt("%s: %s: " fmt), \ printk 36 drivers/media/v4l2-core/v4l2-dev.c printk(KERN_DEBUG pr_fmt("%s: " fmt), \ printk 319 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "plane %u: bytesperline=%u sizeimage=%u\n", i, printk 354 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "line[%02u]=0x%04x, 0x%04x\n", i, printk 491 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG printk 501 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "timecode=%02d:%02d:%02d type=%d, flags=0x%08x, frames=%d, userbits=0x%08x\n", printk 829 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "field=%s\n", printk 834 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "changes=0x%x, type=%u, ", printk 867 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "line[%02u]=0x%04x, 0x%04x\n", i, printk 2811 drivers/media/v4l2-core/v4l2-ioctl.c printk(KERN_DEBUG "%s: ", prefix); printk 34 drivers/media/v4l2-core/v4l2-mem2mem.c printk(KERN_DEBUG "%s: " fmt, __func__, ## arg);\ printk 27 drivers/media/v4l2-core/videobuf-core.c printk(KERN_ERR \ printk 44 drivers/media/v4l2-core/videobuf-core.c printk(KERN_DEBUG "vbuf: " fmt, ## arg); \ printk 61 drivers/media/v4l2-core/videobuf-core.c printk(KERN_ERR "No specific ops defined!\n"); printk 39 drivers/media/v4l2-core/videobuf-dma-sg.c printk(KERN_ERR "magic mismatch: %x (expected %x)\n", \ printk 53 drivers/media/v4l2-core/videobuf-dma-sg.c printk(KERN_DEBUG "vbuf-sg: " fmt , ## arg) printk 316 drivers/media/v4l2-core/videobuf-dma-sg.c printk(KERN_WARNING printk 32 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "magic mismatch: %x (expected %x)\n", \ printk 46 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_DEBUG "vbuf-vmalloc: " fmt , ## arg) printk 171 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "memory is not allocated/mmapped.\n"); printk 181 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "USERPTR is currently not supported\n"); printk 191 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "vmalloc (%d pages) failed\n", pages); printk 202 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "Memory method currently unsupported.\n"); printk 236 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "vmalloc (%d pages) failed\n", pages); printk 244 drivers/media/v4l2-core/videobuf-vmalloc.c printk(KERN_ERR "mmap: remap failed with error %d. ", retval); printk 1034 drivers/memory/omap-gpmc.c printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); printk 902 drivers/memstick/core/mspro_block.c printk(KERN_WARNING printk 910 drivers/memstick/core/mspro_block.c printk(KERN_INFO "%s: switching to 4-bit parallel mode\n", printk 920 drivers/memstick/core/mspro_block.c printk(KERN_INFO printk 924 drivers/memstick/core/mspro_block.c printk(KERN_WARNING printk 937 drivers/memstick/core/mspro_block.c printk(KERN_WARNING printk 1004 drivers/memstick/core/mspro_block.c printk(KERN_ERR "%s: unrecognized device signature %x\n", printk 1011 drivers/memstick/core/mspro_block.c printk(KERN_WARNING "%s: way too many attribute entries\n", printk 1448 drivers/memstick/core/mspro_block.c printk(KERN_ERR DRIVER_NAME ": failed to register " printk 158 drivers/memstick/host/r592.h printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__) printk 163 drivers/memstick/host/r592.h printk(KERN_DEBUG DRV_NAME \ printk 542 drivers/memstick/host/tifm_ms.c printk(KERN_ERR printk 559 drivers/memstick/host/tifm_ms.c printk(KERN_WARNING "%s : card gone, unexpectedly\n", printk 373 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", printk 390 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 394 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 403 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", printk 405 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", printk 408 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, printk 412 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " printk 417 drivers/message/fusion/mptbase.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " printk 450 drivers/message/fusion/mptbase.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", printk 492 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", printk 533 drivers/message/fusion/mptbase.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", printk 556 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", printk 662 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 666 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 899 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " printk 933 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " printk 938 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, printk 942 drivers/message/fusion/mptbase.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", printk 975 drivers/message/fusion/mptbase.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " printk 1010 drivers/message/fusion/mptbase.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", printk 1109 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "1078 P0M2 addressing for " printk 1223 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", printk 1334 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1349 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 1656 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " printk 1661 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " printk 1674 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 1681 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 1685 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", printk 1694 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 1698 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", printk 1728 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" printk 1734 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", printk 1785 drivers/message/fusion/mptbase.c printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); printk 1791 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); printk 1800 drivers/message/fusion/mptbase.c printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); printk 1802 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); printk 1873 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", printk 1879 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", printk 2002 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", printk 2010 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", printk 2156 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " printk 2162 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 2197 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " printk 2224 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", printk 2239 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", printk 2246 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); printk 2250 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " printk 2253 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT printk 2311 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, printk 2337 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", printk 2342 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_INFO_FMT printk 2349 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2363 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2376 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2385 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2393 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2423 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", printk 2430 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Unable to allocate " printk 2442 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 2453 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", printk 2461 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", printk 2467 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2478 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2486 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2502 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2508 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2520 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 2537 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" printk 2593 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2655 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," printk 2672 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2677 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2683 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2705 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2709 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 2722 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " printk 2726 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " printk 2742 drivers/message/fusion/mptbase.c dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", printk 2797 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 2801 drivers/message/fusion/mptbase.c dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2853 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", printk 2872 drivers/message/fusion/mptbase.c printk(KERN_INFO "%s: ", ioc->name); printk 2933 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); printk 2941 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", printk 2948 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 2958 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", printk 2960 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", printk 2968 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", printk 2977 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT printk 3008 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); printk 3017 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); printk 3024 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 3039 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, printk 3093 drivers/message/fusion/mptbase.c printk(KERN_ERR MYNAM printk 3112 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3197 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", printk 3211 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3225 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", printk 3227 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", printk 3235 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 3266 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", printk 3285 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", printk 3361 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", printk 3367 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", printk 3398 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", printk 3404 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); printk 3412 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", printk 3416 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); printk 3435 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", printk 3443 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", printk 3483 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", printk 3527 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", printk 3531 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", printk 3556 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", printk 3596 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", printk 3602 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " printk 3626 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " printk 3634 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " printk 3650 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", printk 3655 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " printk 3691 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", printk 3716 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", printk 3729 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " printk 3755 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", printk 3758 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", printk 3773 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", printk 3784 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); printk 3788 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); printk 3822 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " printk 3826 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", printk 3837 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", printk 3845 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3852 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3857 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3868 drivers/message/fusion/mptbase.c ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3906 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); printk 3924 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", printk 3931 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", printk 3942 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", printk 3985 drivers/message/fusion/mptbase.c drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " printk 4010 drivers/message/fusion/mptbase.c drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4034 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", printk 4062 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", printk 4070 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", printk 4077 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", printk 4093 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", printk 4130 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", printk 4140 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 4155 drivers/message/fusion/mptbase.c drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4172 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Failed to come READY " printk 4182 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", printk 4211 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", printk 4221 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", printk 4233 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", printk 4241 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", printk 4275 drivers/message/fusion/mptbase.c drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", printk 4293 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 4341 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", printk 4348 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", printk 4378 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", printk 4396 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", printk 4415 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", printk 4461 drivers/message/fusion/mptbase.c d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4472 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT printk 4481 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", printk 4483 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", printk 4487 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", printk 4489 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", printk 4494 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", printk 4496 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", printk 4502 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", printk 4507 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", printk 4518 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", printk 4529 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", printk 4542 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", printk 4580 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", printk 4587 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", printk 4595 drivers/message/fusion/mptbase.c dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", printk 4607 drivers/message/fusion/mptbase.c d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4634 drivers/message/fusion/mptbase.c d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4690 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", printk 4725 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); printk 4728 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", printk 4737 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", printk 4793 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", printk 4798 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", printk 4842 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", printk 4847 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", printk 4894 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", printk 4917 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", printk 4930 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); printk 4933 drivers/message/fusion/mptbase.c dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", printk 5093 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "%s: persist_opcode=%x\n", printk 5099 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "%s: no msg frames!\n", __func__); printk 5115 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "%s: failed\n", __func__); printk 5119 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 5136 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", printk 5139 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "%s: failed\n", __func__); printk 5142 drivers/message/fusion/mptbase.c printk(KERN_DEBUG "%s: success\n", __func__); printk 5177 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", printk 5180 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", printk 5186 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " volume has been created\n", printk 5192 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " volume has been deleted\n", printk 5197 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", printk 5202 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", printk 5220 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", printk 5225 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", printk 5230 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", printk 5235 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", printk 5240 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", printk 5266 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", printk 5271 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", printk 5276 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", printk 5383 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", printk 5419 drivers/message/fusion/mptbase.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5431 drivers/message/fusion/mptbase.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5441 drivers/message/fusion/mptbase.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5458 drivers/message/fusion/mptbase.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5607 drivers/message/fusion/mptbase.c dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", printk 5610 drivers/message/fusion/mptbase.c dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", printk 6182 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", printk 6193 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", printk 6198 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6202 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6208 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_WARN_FMT printk 6215 drivers/message/fusion/mptbase.c dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); printk 6287 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6308 drivers/message/fusion/mptbase.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", printk 6313 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); printk 6365 drivers/message/fusion/mptbase.c dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n", printk 6373 drivers/message/fusion/mptbase.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6383 drivers/message/fusion/mptbase.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6399 drivers/message/fusion/mptbase.c dcprintk(ioc, printk(MYIOC_s_WARN_FMT printk 6456 drivers/message/fusion/mptbase.c dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6467 drivers/message/fusion/mptbase.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6479 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "%s: host reset in" printk 6512 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "Retry completed " printk 6516 drivers/message/fusion/mptbase.c dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", printk 6525 drivers/message/fusion/mptbase.c printk(MYIOC_s_WARN_FMT printk 6537 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT printk 6564 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6568 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6572 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6943 drivers/message/fusion/mptbase.c printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", printk 6978 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", printk 6988 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 6994 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 7091 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 7149 drivers/message/fusion/mptbase.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); printk 7151 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); printk 7152 drivers/message/fusion/mptbase.c printk("MF count 0x%x !\n", ioc->mfcnt); printk 7199 drivers/message/fusion/mptbase.c printk(KERN_WARNING MYNAM printk 7229 drivers/message/fusion/mptbase.c printk(MYIOC_s_DEBUG_FMT printk 7671 drivers/message/fusion/mptbase.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 7675 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM printk 7678 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(" %08x", printk 7680 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); printk 7771 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 7784 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 7787 drivers/message/fusion/mptbase.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", printk 7836 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", printk 7905 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); printk 8113 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT printk 8119 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT printk 8125 drivers/message/fusion/mptbase.c printk(MYIOC_s_INFO_FMT printk 8208 drivers/message/fusion/mptbase.c dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", printk 8435 drivers/message/fusion/mptbase.c dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", printk 8483 drivers/message/fusion/mptbase.c printk(KERN_INFO COPYRIGHT "\n"); printk 84 drivers/message/fusion/mptbase.h printk(KERN_INFO "%s %s\n", s, ver); printk 210 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function " printk 231 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 241 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 291 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 339 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n", printk 346 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", printk 382 drivers/message/fusion/mptctl.c printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n", printk 395 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT printk 409 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 421 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 428 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 445 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 470 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n", printk 509 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n", printk 528 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 532 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 536 drivers/message/fusion/mptctl.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 559 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n", printk 570 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Raised SIGIO to application\n", printk 572 drivers/message/fusion/mptctl.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 590 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 592 drivers/message/fusion/mptctl.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 632 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s::mptctl_ioctl() @%d - " printk 648 drivers/message/fusion/mptctl.c printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n", printk 714 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - " printk 720 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n", printk 724 drivers/message/fusion/mptctl.c printk (MYIOC_s_ERR_FMT "%s@%d::mptctl_do_reset - reset failed.\n", printk 756 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::_ioctl_fwdl - " printk 808 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT printk 810 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.bufp = %p\n", printk 812 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n", printk 884 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: sgl buffer = %p, sgfrags = %d\n", printk 909 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - " printk 936 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__); printk 942 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT printk 952 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__); printk 964 drivers/message/fusion/mptctl.c printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name); printk 967 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n", printk 969 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "(time to go bang on somebodies door)\n", printk 973 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "IOC_BUSY!\n", iocp->name); printk 974 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "(try again later?)\n", iocp->name); printk 977 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "ioctl_fwdl() returned [bad] status = %04xh\n", printk 979 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "(bad VooDoo)\n", iocp->name); printk 1073 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "-SG: No can do - " printk 1075 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n", printk 1100 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT printk 1102 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "(freeing %d frags)\n", ioc->name, numfrags); printk 1109 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "-SG: No can do - " printk 1111 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n", printk 1123 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - " printk 1126 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - " printk 1209 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: Free'd 1 SGL buf + %d kbufs!\n", printk 1251 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mpt_ioctl_iocinfo() - memdup_user returned error [%ld]\n", printk 1258 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " printk 1265 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_getiocinfo called.\n", printk 1339 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " printk 1376 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_gettargetinfo - " printk 1382 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n", printk 1393 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n", printk 1414 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n", printk 1446 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - " printk 1456 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - " printk 1483 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - " printk 1489 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n", printk 1508 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_readtest - " printk 1535 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - " printk 1541 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n", printk 1549 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventquery - " printk 1565 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - " printk 1571 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n", printk 1579 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT printk 1605 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_eventreport - " printk 1611 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n", printk 1633 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventreport - " printk 1651 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_replace_fw - " printk 1657 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n", printk 1677 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_replace_fw - " printk 1711 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_mpt_command - " printk 1763 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - " printk 1787 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 1807 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 1820 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n", printk 1833 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\ttype=0x%02x ext_type=0x%02x " printk 1862 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 1870 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 1925 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 1944 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 2001 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 2013 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2043 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 2076 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 2129 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT printk 2183 drivers/message/fusion/mptctl.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 2203 drivers/message/fusion/mptctl.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n", printk 2211 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT printk 2243 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT printk 2260 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 2278 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " printk 2350 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_host_info - " printk 2356 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n", printk 2462 drivers/message/fusion/mptctl.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT printk 2498 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__); printk 2504 drivers/message/fusion/mptctl.c printk(MYIOC_s_WARN_FMT printk 2535 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hpgethostinfo - " printk 2571 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_targetinfo - " printk 2579 drivers/message/fusion/mptctl.c dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n", printk 2680 drivers/message/fusion/mptctl.c printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hp_target_info - " printk 2730 drivers/message/fusion/mptctl.c printk(KERN_DEBUG MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n", printk 2738 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mptfwxfer_ioctl() called\n", printk 2770 drivers/message/fusion/mptctl.c printk(KERN_DEBUG MYNAM "::compat_mpt_command @%d - ioc%d not found!\n", printk 2778 drivers/message/fusion/mptctl.c dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mpt_command() called\n", printk 2889 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR); printk 2892 drivers/message/fusion/mptctl.c printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n"); printk 2893 drivers/message/fusion/mptctl.c printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n", printk 2903 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); printk 2912 drivers/message/fusion/mptctl.c printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); printk 2935 drivers/message/fusion/mptctl.c printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n", printk 155 drivers/message/fusion/mptdebug.h printk(KERN_DEBUG "F/W download request:\n"); printk 157 drivers/message/fusion/mptdebug.h printk(" %08x", le32_to_cpu(mfp[i])); printk 158 drivers/message/fusion/mptdebug.h printk("\n"); printk 168 drivers/message/fusion/mptdebug.h printk(KERN_DEBUG "%s: About to Put msg frame @ %p:\n", printk 175 drivers/message/fusion/mptdebug.h printk("\n"); printk 176 drivers/message/fusion/mptdebug.h printk(" %08x", le32_to_cpu(mfp[ii])); printk 178 drivers/message/fusion/mptdebug.h printk("\n"); printk 189 drivers/message/fusion/mptdebug.h printk(KERN_INFO " "); printk 191 drivers/message/fusion/mptdebug.h printk(" %08x", le32_to_cpu(mfp[i])); printk 192 drivers/message/fusion/mptdebug.h printk("\n"); printk 205 drivers/message/fusion/mptdebug.h printk("\n"); printk 206 drivers/message/fusion/mptdebug.h printk("%08x ", le32_to_cpu(mfp[i])); printk 208 drivers/message/fusion/mptdebug.h printk("\n"); printk 219 drivers/message/fusion/mptdebug.h printk(KERN_INFO " "); printk 221 drivers/message/fusion/mptdebug.h printk(" %08x", le32_to_cpu(mfp[i])); printk 222 drivers/message/fusion/mptdebug.h printk("\n"); printk 233 drivers/message/fusion/mptdebug.h printk(KERN_INFO " "); printk 235 drivers/message/fusion/mptdebug.h printk(" %08x", le32_to_cpu(mfp[i])); printk 236 drivers/message/fusion/mptdebug.h printk("\n"); printk 247 drivers/message/fusion/mptdebug.h printk(KERN_DEBUG "TM_REQUEST:\n"); printk 250 drivers/message/fusion/mptdebug.h printk("\n"); printk 251 drivers/message/fusion/mptdebug.h printk("%08x ", le32_to_cpu(mfp[i])); printk 253 drivers/message/fusion/mptdebug.h printk("\n"); printk 264 drivers/message/fusion/mptdebug.h printk(KERN_DEBUG "TM_REPLY MessageLength=%d:\n", n); printk 267 drivers/message/fusion/mptdebug.h printk("\n"); printk 268 drivers/message/fusion/mptdebug.h printk(" %08x", le32_to_cpu(mfp[i])); printk 270 drivers/message/fusion/mptdebug.h printk("\n"); printk 205 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 219 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 227 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 485 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 577 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 617 drivers/message/fusion/mptfc.c printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", printk 706 drivers/message/fusion/mptfc.c printk(MYIOC_s_NOTE_FMT printk 710 drivers/message/fusion/mptfc.c printk(MYIOC_s_WARN_FMT printk 813 drivers/message/fusion/mptfc.c printk(MYIOC_s_INFO_FMT "Firmware discovery not" printk 1104 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 1159 drivers/message/fusion/mptfc.c dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT printk 1193 drivers/message/fusion/mptfc.c printk(MYIOC_s_WARN_FMT printk 1201 drivers/message/fusion/mptfc.c printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", printk 1217 drivers/message/fusion/mptfc.c printk(MYIOC_s_WARN_FMT printk 1226 drivers/message/fusion/mptfc.c printk(MYIOC_s_WARN_FMT printk 1280 drivers/message/fusion/mptfc.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1301 drivers/message/fusion/mptfc.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", printk 1309 drivers/message/fusion/mptfc.c dprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1377 drivers/message/fusion/mptfc.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", printk 1419 drivers/message/fusion/mptfc.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 226 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM "/lan_reply: Got a turbo reply " printk 286 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM "/lan_reply: Got a non-turbo " printk 386 drivers/message/fusion/mptlan.c printk (KERN_WARNING MYNAM "/lan_open: lan_reset failed."); printk 389 drivers/message/fusion/mptlan.c printk ("The ioc is active. Perhaps it needs to be" printk 392 drivers/message/fusion/mptlan.c printk ("The ioc in inactive, most likely in the " printk 434 drivers/message/fusion/mptlan.c printk(KERN_INFO MYNAM ": %s/%s: interface up & active\n", printk 438 drivers/message/fusion/mptlan.c printk (KERN_WARNING MYNAM "/lo: Unable to register for Event" printk 546 drivers/message/fusion/mptlan.c printk(KERN_INFO MYNAM ": %s/%s: interface down & inactive\n", printk 631 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": %s/%s: ERROR - Invalid SGL sent to IOC!\n", printk 697 drivers/message/fusion/mptlan.c printk (KERN_ERR "%s: no tx context available: %u\n", printk 707 drivers/message/fusion/mptlan.c printk (KERN_ERR "%s: Unable to alloc request frame\n", printk 868 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n", printk 981 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": %s/%s: ERROR - Got a non-TURBO " printk 984 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": MsgFlags = %02x, IOCStatus = %04x\n", printk 1014 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n", printk 1056 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n", printk 1097 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": %s/%s: Yoohoo! mpt_rxfidx_tail = %d, " printk 1107 drivers/message/fusion/mptlan.c printk (KERN_WARNING MYNAM ": %s/%s: WARNING - IOC out of buckets! " printk 1112 drivers/message/fusion/mptlan.c printk (KERN_INFO MYNAM ": %s/%s: IOC says %d buckets left. " printk 1121 drivers/message/fusion/mptlan.c printk (KERN_WARNING MYNAM " Mismatch between driver's " printk 1167 drivers/message/fusion/mptlan.c printk (KERN_ERR "%s: Unable to alloc request frame\n", printk 1194 drivers/message/fusion/mptlan.c printk (KERN_ERR "%s: Can't alloc context\n", printk 1216 drivers/message/fusion/mptlan.c printk (KERN_WARNING printk 1255 drivers/message/fusion/mptlan.c /**/ printk (KERN_WARNING MYNAM "/%s: No buckets posted\n", printk 1390 drivers/message/fusion/mptlan.c printk(KERN_INFO MYNAM ": %s: PortNum=%x, " printk 1399 drivers/message/fusion/mptlan.c printk(KERN_INFO MYNAM ": %s: Hmmm... LAN protocol " printk 1407 drivers/message/fusion/mptlan.c printk(KERN_ERR MYNAM ": %s: Unable to register " printk 1413 drivers/message/fusion/mptlan.c printk(KERN_INFO MYNAM ": %s: Fusion MPT LAN device " printk 1415 drivers/message/fusion/mptlan.c printk(KERN_INFO MYNAM ": %s/%s: " printk 1452 drivers/message/fusion/mptlan.c printk (KERN_ERR MYNAM ": Failed to register with MPT base driver\n"); printk 1459 drivers/message/fusion/mptlan.c printk(KERN_ERR MYNAM ": Eieee! unable to register a reset " printk 1503 drivers/message/fusion/mptlan.c printk (KERN_WARNING MYNAM ": %s: WARNING - Broadcast swap F/W bug detected!\n", printk 1505 drivers/message/fusion/mptlan.c printk (KERN_WARNING MYNAM ": Please update sender @ MAC_addr = %pM\n", printk 112 drivers/message/fusion/mptlan.h #define dioprintk(x) printk x printk 118 drivers/message/fusion/mptlan.h #define dlprintk(x) printk x printk 140 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 142 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n", printk 144 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n", printk 146 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n", printk 148 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n", printk 150 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n", printk 152 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n", printk 154 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 157 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n", printk 167 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 169 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 172 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n", printk 174 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 177 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n", printk 179 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n", printk 181 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n", printk 183 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n", printk 189 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 191 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n", printk 193 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 196 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 199 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 210 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 212 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n", printk 214 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n", printk 216 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n", printk 218 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n", printk 220 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n", printk 222 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n", printk 224 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n", printk 226 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n", printk 228 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n", printk 230 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n", printk 232 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n", printk 234 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n", printk 240 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 242 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n", printk 244 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n", printk 246 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n", printk 248 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n", printk 250 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n", printk 252 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n", printk 254 drivers/message/fusion/mptsas.c dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 293 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)" printk 308 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task " printk 324 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n", printk 344 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 463 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d " printk 492 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n", printk 499 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n", printk 522 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n", printk 853 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 875 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n", printk 894 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t" printk 911 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 945 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 950 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n", printk 953 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk("\n")); printk 998 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", printk 1016 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", printk 1050 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT printk 1056 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", printk 1071 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1130 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT printk 1201 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: " printk 1208 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1247 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1302 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1307 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1311 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1425 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1434 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1442 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1458 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d," printk 1467 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1475 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1510 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1517 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1547 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1626 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1631 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after " printk 1648 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), " printk 1855 drivers/message/fusion/mptsas.c printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n", printk 1936 drivers/message/fusion/mptsas.c printk(KERN_ERR MYNAM ": %s: Can't locate host! (sc=%p)\n", printk 1943 drivers/message/fusion/mptsas.c printk(KERN_ERR MYNAM ": %s: Wrong bus type (sc=%p)\n", printk 1952 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: ioc is in reset," printk 1960 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: target removed " printk 2140 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", printk 2228 drivers/message/fusion/mptsas.c printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u, rsp %u\n", printk 2323 drivers/message/fusion/mptsas.c printk(MYIOC_s_ERR_FMT printk 2849 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "%s: host reset in progress!\n", printk 2872 drivers/message/fusion/mptsas.c printk(KERN_ERR "Memory allocation failure at %s:%d/%s()!\n", printk 2954 drivers/message/fusion/mptsas.c printk(MYIOC_s_ERR_FMT printk 3167 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 3179 drivers/message/fusion/mptsas.c dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3241 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 3250 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 3270 drivers/message/fusion/mptsas.c printk(KERN_INFO "Device returned, unsetting inDMD\n"); printk 3443 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " printk 3578 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, " printk 3657 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 3669 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " printk 3738 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3756 drivers/message/fusion/mptsas.c printk(MYIOC_s_DEBUG_FMT printk 3786 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3816 drivers/message/fusion/mptsas.c printk(MYIOC_s_DEBUG_FMT printk 3834 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 3925 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 3937 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " printk 4010 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, " printk 4321 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT "firmware bug: unable " printk 4352 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4364 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4374 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4409 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4426 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4434 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4442 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4468 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4485 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4493 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4501 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4508 drivers/message/fusion/mptsas.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4533 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, " printk 4543 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, " printk 4663 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: " printk 4772 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no " printk 4777 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, " printk 4806 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_ERR_FMT printk 4817 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4849 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4906 drivers/message/fusion/mptsas.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 4915 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT printk 4944 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: " printk 5025 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5032 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5036 drivers/message/fusion/mptsas.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5088 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name, printk 5117 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, " printk 5153 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT printk 5161 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", printk 5177 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT printk 5185 drivers/message/fusion/mptsas.c printk(MYIOC_s_WARN_FMT printk 5241 drivers/message/fusion/mptsas.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5250 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "Invalid value passed for" printk 5256 drivers/message/fusion/mptsas.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 5276 drivers/message/fusion/mptsas.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", printk 5295 drivers/message/fusion/mptsas.c dprintk(ioc, printk(MYIOC_s_ERR_FMT printk 5329 drivers/message/fusion/mptsas.c printk(MYIOC_s_INFO_FMT "IOC is in Target mode\n", ioc->name); printk 141 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n", printk 153 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 159 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n", printk 287 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 303 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n", printk 337 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); printk 348 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 370 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)", printk 379 drivers/message/fusion/mptscsih.c dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n", printk 407 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n", printk 418 drivers/message/fusion/mptscsih.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 539 drivers/message/fusion/mptscsih.c printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n", printk 541 drivers/message/fusion/mptscsih.c printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, " printk 544 drivers/message/fusion/mptscsih.c printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, " printk 548 drivers/message/fusion/mptscsih.c printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), " printk 558 drivers/message/fusion/mptscsih.c printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: " printk 567 drivers/message/fusion/mptscsih.c printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n", printk 620 drivers/message/fusion/mptscsih.c printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n", printk 648 drivers/message/fusion/mptscsih.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 652 drivers/message/fusion/mptscsih.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 695 drivers/message/fusion/mptscsih.c printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] " printk 760 drivers/message/fusion/mptscsih.c printk(KERN_INFO printk 811 drivers/message/fusion/mptscsih.c dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 843 drivers/message/fusion/mptscsih.c printk(KERN_WARNING "Errata" printk 871 drivers/message/fusion/mptscsih.c dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 874 drivers/message/fusion/mptscsih.c dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 918 drivers/message/fusion/mptscsih.c printk(KERN_WARNING"Errata" printk 933 drivers/message/fusion/mptscsih.c printk(KERN_WARNING printk 1160 drivers/message/fusion/mptscsih.c dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n", printk 1194 drivers/message/fusion/mptscsih.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1330 drivers/message/fusion/mptscsih.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n", printk 1340 drivers/message/fusion/mptscsih.c dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n", printk 1427 drivers/message/fusion/mptscsih.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n", printk 1479 drivers/message/fusion/mptscsih.c dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n", printk 1530 drivers/message/fusion/mptscsih.c printk(MYIOC_s_WARN_FMT printk 1533 drivers/message/fusion/mptscsih.c printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", printk 1536 drivers/message/fusion/mptscsih.c printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset " printk 1548 drivers/message/fusion/mptscsih.c printk(MYIOC_s_WARN_FMT printk 1565 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1571 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", printk 1595 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) " printk 1610 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1623 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_ERR_FMT printk 1635 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1643 drivers/message/fusion/mptscsih.c printk(MYIOC_s_WARN_FMT printk 1697 drivers/message/fusion/mptscsih.c printk(KERN_ERR MYNAM ": task abort: " printk 1703 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n", printk 1709 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1721 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1732 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1747 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: " printk 1776 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1781 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1788 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n", printk 1815 drivers/message/fusion/mptscsih.c printk(KERN_ERR MYNAM ": target reset: " printk 1821 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n", printk 1845 drivers/message/fusion/mptscsih.c printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n", printk 1875 drivers/message/fusion/mptscsih.c printk(KERN_ERR MYNAM ": bus reset: " printk 1881 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n", printk 1896 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n", printk 1924 drivers/message/fusion/mptscsih.c printk(KERN_ERR MYNAM ": host reset: " printk 1933 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", printk 1945 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n", printk 1969 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2034 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n", printk 2057 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2364 drivers/message/fusion/mptscsih.c dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2368 drivers/message/fusion/mptscsih.c dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2375 drivers/message/fusion/mptscsih.c dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2380 drivers/message/fusion/mptscsih.c dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2386 drivers/message/fusion/mptscsih.c dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2454 drivers/message/fusion/mptscsih.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n", printk 2556 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2560 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2565 drivers/message/fusion/mptscsih.c dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2585 drivers/message/fusion/mptscsih.c devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2686 drivers/message/fusion/mptscsih.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2750 drivers/message/fusion/mptscsih.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2794 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2901 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n", printk 2942 drivers/message/fusion/mptscsih.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2953 drivers/message/fusion/mptscsih.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2970 drivers/message/fusion/mptscsih.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 2978 drivers/message/fusion/mptscsih.c printk(MYIOC_s_WARN_FMT printk 2990 drivers/message/fusion/mptscsih.c devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n", printk 3214 drivers/message/fusion/mptscsih.c printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n", printk 144 drivers/message/fusion/mptspi.c printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to " printk 237 drivers/message/fusion/mptspi.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 267 drivers/message/fusion/mptspi.c dfailprintk(ioc, printk(MYIOC_s_WARN_FMT printk 305 drivers/message/fusion/mptspi.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 433 drivers/message/fusion/mptspi.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 473 drivers/message/fusion/mptspi.c ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x" printk 498 drivers/message/fusion/mptspi.c ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x" printk 631 drivers/message/fusion/mptspi.c dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT printk 654 drivers/message/fusion/mptspi.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n", printk 662 drivers/message/fusion/mptspi.c dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n", printk 667 drivers/message/fusion/mptspi.c printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", printk 730 drivers/message/fusion/mptspi.c printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", printk 762 drivers/message/fusion/mptspi.c ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x" printk 1376 drivers/message/fusion/mptspi.c printk(MYIOC_s_WARN_FMT printk 1384 drivers/message/fusion/mptspi.c printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", printk 1400 drivers/message/fusion/mptspi.c printk(MYIOC_s_WARN_FMT printk 1409 drivers/message/fusion/mptspi.c printk(MYIOC_s_WARN_FMT printk 1482 drivers/message/fusion/mptspi.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1503 drivers/message/fusion/mptspi.c dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", printk 1507 drivers/message/fusion/mptspi.c ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT printk 1523 drivers/message/fusion/mptspi.c dprintk(ioc, printk(MYIOC_s_ERR_FMT printk 92 drivers/mfd/mcp-sa11x0.c printk(KERN_WARNING "mcp: write timed out\n"); printk 119 drivers/mfd/mcp-sa11x0.c printk(KERN_WARNING "mcp: read timed out\n"); printk 395 drivers/mfd/mfd-core.c printk(KERN_ERR "failed to find device for cell %s\n", cell); printk 741 drivers/mfd/sm501.c printk(KERN_DEBUG "%s[%d] %pR\n", printk 374 drivers/mfd/t7l66xb.c printk(KERN_INFO "%s rev %d @ 0x%08lx, irq %d\n", printk 675 drivers/mfd/tc6393xb.c printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n", printk 803 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n", printk 813 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write led%i_on register\n", printk 826 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write led%i_per register\n", printk 904 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write vdcdc1 register\n", printk 937 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write vregs1 register\n", printk 966 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write vdcdc2 register\n", printk 1019 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write chconfig register\n", printk 1033 drivers/mfd/tps65010.c printk(KERN_ERR "%s: Failed to write vdcdc1 register\n", printk 1000 drivers/mfd/twl-core.c printk(KERN_WARNING "Skipping twl internal clock init and " printk 509 drivers/mfd/ucb1x00-core.c printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); printk 39 drivers/mfd/wm8350-core.c printk(KERN_DEBUG); \ printk 41 drivers/mfd/wm8350-core.c printk(" 0x%4.4x", *src_++); \ printk 42 drivers/mfd/wm8350-core.c printk("\n"); \ printk 50 drivers/mfd/wm8350-core.c #define ldbg(format, arg...) printk(format, ## arg) printk 32 drivers/misc/altera-stapl/altera.c printk(KERN_DEBUG args); \ printk 515 drivers/misc/altera-stapl/altera.c printk("opcode: %02x\n", opcode); printk 706 drivers/misc/altera-stapl/altera.c printk(msg_buff, "\n"); printk 2260 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: CRC matched: %04x\n", __func__, printk 2264 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: CRC mismatch: expected %04x, " printk 2269 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: expected CRC not found, " printk 2274 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: error: format isn't " printk 2278 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: CRC function returned error " printk 2448 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: File format is %s ByteCode format\n", printk 2453 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n", printk 2458 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: Actions available:\n", __func__); printk 2466 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: %s\n", printk 2470 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: %s \"%s\"\n", printk 2478 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "%s: %s (%s)\n", printk 2490 drivers/misc/altera-stapl/altera.c printk(KERN_INFO "\n"); printk 2501 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: error: no action specified for " printk 2505 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: error: action \"%s\"" printk 2512 drivers/misc/altera-stapl/altera.c printk(KERN_ERR "%s: error %d\n", __func__, exec_result); printk 977 drivers/misc/c2port/core.c printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION printk 982 drivers/misc/c2port/core.c printk(KERN_ERR "c2port: failed to allocate class\n"); printk 25 drivers/misc/dummy-irq.c printk(KERN_INFO "dummy-irq: interrupt occurred on IRQ %d\n", printk 36 drivers/misc/dummy-irq.c printk(KERN_ERR "dummy-irq: no IRQ given. Use irq=N\n"); printk 40 drivers/misc/dummy-irq.c printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq); printk 43 drivers/misc/dummy-irq.c printk(KERN_INFO "dummy-irq: registered for IRQ %d\n", irq); printk 49 drivers/misc/dummy-irq.c printk(KERN_INFO "dummy-irq unloaded\n"); printk 365 drivers/misc/eeprom/eeprom_93cx6.c printk(KERN_ERR "%s: timeout\n", __func__); printk 31 drivers/misc/ibmasm/ibmasm.h #define err(msg) printk(KERN_ERR "%s: " msg "\n", DRIVER_NAME) printk 32 drivers/misc/ibmasm/ibmasm.h #define info(msg) printk(KERN_INFO "%s: " msg "\n", DRIVER_NAME) printk 38 drivers/misc/ibmasm/ibmasm.h printk(KERN_DEBUG STR , ##ARGS); \ printk 248 drivers/misc/ibmasm/remote.c printk(KERN_INFO "ibmasm remote responding to events on RSA card %d\n", sp->number); printk 100 drivers/misc/kgdbts.c printk(KERN_INFO a); \ printk 104 drivers/misc/kgdbts.c printk(KERN_INFO a); \ printk 108 drivers/misc/kgdbts.c printk(KERN_ERR a); \ printk 842 drivers/misc/kgdbts.c printk(KERN_CRIT "kgdbts: ERROR kgdb corrupted memory\n"); printk 1034 drivers/misc/kgdbts.c printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n", printk 1047 drivers/misc/kgdbts.c printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n", printk 1061 drivers/misc/kgdbts.c printk(KERN_ERR "kgdbts: config string too long\n"); printk 1129 drivers/misc/kgdbts.c printk(KERN_ERR "kgdbts: config string too long\n"); printk 1140 drivers/misc/kgdbts.c printk(KERN_ERR "kgdbts: ERROR: Already configured and running.\n"); printk 1164 drivers/misc/lis3lv02d/lis3lv02d.c printk(KERN_ERR DRIVER_NAME "out of memory\n"); printk 76 drivers/misc/lis3lv02d/lis3lv02d_i2c.c printk(KERN_ERR "lis3: power on failure\n"); printk 181 drivers/misc/phantom.c printk(KERN_ERR "phantom: you need to set NOT_OH " printk 513 drivers/misc/phantom.c printk(KERN_ERR "phantom: can't register phantom class\n"); printk 518 drivers/misc/phantom.c printk(KERN_ERR "phantom: can't create sysfs version file\n"); printk 524 drivers/misc/phantom.c printk(KERN_ERR "phantom: can't register character device\n"); printk 531 drivers/misc/phantom.c printk(KERN_ERR "phantom: can't register pci driver\n"); printk 535 drivers/misc/phantom.c printk(KERN_INFO "Phantom Linux Driver, version " PHANTOM_VERSION ", " printk 370 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: set_irq_chip failed, errno=%d\n", printk 377 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: request_irq failed, errno=%d\n", printk 418 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: uv_setup_irq failed, errno=%d\n", printk 426 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: request_irq failed, errno=%d\n", printk 524 drivers/misc/sgi-gru/grufile.c printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n", printk 528 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: misc_register failed\n", printk 535 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR); printk 541 drivers/misc/sgi-gru/grufile.c printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR); printk 551 drivers/misc/sgi-gru/grufile.c printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR, printk 965 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest0: CBR failure 1\n", smp_processor_id()); printk 970 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest0 bad magic 0x%lx\n", smp_processor_id(), *p); printk 975 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest0: CBR failure 2\n", smp_processor_id()); printk 980 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG printk 1018 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest1: unexpect status %d, i %d\n", printk 1030 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest2: bad message, i %d, m %p, m8 %d\n", printk 1082 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest2: cb %d, exception\n", smp_processor_id(), i); printk 1086 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest2:cb %d, buf 0x%lx, 0x%lx, 0x%lx, 0x%lx\n", printk 1113 drivers/misc/sgi-gru/grukservices.c printk(KERN_DEBUG "GRU:%d quicktest3 error\n", smp_processor_id()); printk 273 drivers/misc/sgi-gru/grutables.h printk(KERN_DEBUG "GRU:%d %s: " fmt, smp_processor_id(), __func__, x);\ printk 162 drivers/misc/tifm_7xx1.c printk(KERN_INFO printk 272 drivers/misc/tifm_core.c printk(KERN_INFO DRIVER_NAME printk 1708 drivers/mmc/host/wbsd.c printk(" id %x", (int)host->chip_id); printk 1709 drivers/mmc/host/wbsd.c printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); printk 1711 drivers/mmc/host/wbsd.c printk(" dma %d", (int)host->dma); printk 1713 drivers/mmc/host/wbsd.c printk(" FIFO"); printk 1715 drivers/mmc/host/wbsd.c printk(" PnP"); printk 1716 drivers/mmc/host/wbsd.c printk("\n"); printk 122 drivers/mtd/chips/cfi_cmdset_0001.c printk(" Extended Query version %c.%c\n", extp->MajorVersion, extp->MinorVersion); printk 123 drivers/mtd/chips/cfi_cmdset_0001.c printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport); printk 124 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported"); printk 125 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported"); printk 126 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported"); printk 127 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported"); printk 128 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported"); printk 129 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported"); printk 130 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported"); printk 131 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported"); printk 132 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported"); printk 133 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Simultaneous operations: %s\n", extp->FeatureSupport&512?"supported":"unsupported"); printk 134 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Extended Flash Array: %s\n", extp->FeatureSupport&1024?"supported":"unsupported"); printk 137 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Unknown Bit %X: supported\n", i); printk 140 drivers/mtd/chips/cfi_cmdset_0001.c printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport); printk 141 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported"); printk 144 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Unknown Bit %X: supported\n", i); printk 147 drivers/mtd/chips/cfi_cmdset_0001.c printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask); printk 148 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no"); printk 149 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Lock-Down Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no"); printk 152 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Unknown Bit %X Active: yes\n",i); printk 154 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - EFA Lock Bit: %s\n", extp->BlkStatusRegMask&16?"yes":"no"); printk 155 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - EFA Lock-Down Bit: %s\n", extp->BlkStatusRegMask&32?"yes":"no"); printk 158 drivers/mtd/chips/cfi_cmdset_0001.c printk(" - Unknown Bit %X Active: yes\n",i); printk 161 drivers/mtd/chips/cfi_cmdset_0001.c printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", printk 164 drivers/mtd/chips/cfi_cmdset_0001.c printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", printk 186 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features); printk 228 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_WARNING "cfi_cmdset_0001: Suspend " printk 243 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_WARNING "cfi_cmdset_0001: write suspend disabled\n"); printk 286 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n"); printk 292 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n"); printk 311 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_INFO "Using buffer write method\n" ); printk 327 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_INFO "Using auto-unlock on power-up/resume\n" ); printk 407 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR " Unknown Intel/Sharp Extended Query " printk 467 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR printk 534 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_NOTICE "cfi_cmdset_0001: Erase suspend on write enabled\n"); printk 638 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); printk 643 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "erase region %d: offset=0x%llx,size=0x%x,blocks=%d\n", printk 738 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n", printk 752 drivers/mtd/chips/cfi_cmdset_0001.c printk( KERN_ERR printk 790 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "%s: %d set(s) of %d interleaved chips " printk 881 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: Chip not ready after erase " printk 1085 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate); printk 1464 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name); printk 1588 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: word write error (status timeout)\n", map->name); printk 1605 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: word write error (bad VPP)\n", map->name); printk 1608 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: word write error (status 0x%lx)\n", map->name, chipstatus); printk 1751 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_WARNING "SR.4 or SR.5 bits set in buffer write (status %lx). Clearing.\n", status.x[0]); printk 1769 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: Chip not ready for buffer write. Xstatus = %lx, status = %lx\n", printk 1834 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name); printk 1851 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: buffer write error (bad VPP)\n", map->name); printk 1854 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: buffer write error (status 0x%lx)\n", map->name, chipstatus); printk 1972 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name); printk 1991 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: block erase error: (bad command sequence, status 0x%lx)\n", map->name, chipstatus); printk 1998 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: block erase error: (bad VPP)\n", map->name); printk 2001 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus); printk 2007 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: block erase failed at 0x%08lx (status 0x%lx)\n", map->name, adr, chipstatus); printk 2091 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "block status register for 0x%08lx is %x\n", printk 2149 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name); printk 2165 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", printk 2175 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "%s: lock status after, ret=%d\n", printk 2189 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", printk 2199 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_DEBUG "%s: lock status after, ret=%d\n", printk 2538 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_NOTICE "Flash device refused suspend due to pending operation (oldstate %d)\n", chip->oldstate); printk 2547 drivers/mtd/chips/cfi_cmdset_0001.c printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state); printk 181 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Silicon revision: %d\n", extp->SiliconRevision >> 1); printk 182 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Address sensitive unlock: %s\n", printk 186 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Erase Suspend: %s\n", erase_suspend[extp->EraseSuspend]); printk 188 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Erase Suspend: Unknown value %d\n", extp->EraseSuspend); printk 191 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Block protection: Not supported\n"); printk 193 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Block protection: %d sectors per group\n", extp->BlkProt); printk 196 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Temporary block unprotect: %s\n", printk 198 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Block protect/unprotect scheme: %d\n", extp->BlkProtUnprot); printk 199 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Number of simultaneous operations: %d\n", extp->SimultaneousOps); printk 200 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Burst mode: %s\n", printk 203 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Page mode: Not supported\n"); printk 205 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Page mode: %d word page\n", extp->PageMode << 2); printk 207 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Vpp Supply Minimum Program/Erase Voltage: %d.%d V\n", printk 209 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Vpp Supply Maximum Program/Erase Voltage: %d.%d V\n", printk 213 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Top/Bottom Boot Block: %s\n", top_bottom[extp->TopBottom]); printk 215 drivers/mtd/chips/cfi_cmdset_0002.c printk(" Top/Bottom Boot Block: Unknown value %d\n", extp->TopBottom); printk 257 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id); printk 505 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_NOTICE " Fixing Samsung's Amd/Fujitsu" printk 642 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query " printk 651 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_INFO " Amd/Fujitsu Extended Query version %c.%c.\n", printk 669 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_INFO " Advanced Sector Protection (PPB Locking) supported\n"); printk 678 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "%s: CFI contains unrecognised boot " printk 685 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "%s: Swapping erase regions for top-boot CFI table.\n", map->name); printk 756 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_NOTICE "number of %s chips: %d\n", printk 785 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); printk 897 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); printk 941 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__); printk 1008 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate); printk 1701 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); printk 2485 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "MTD %s(): software timeout\n", printk 2584 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_WARNING "MTD %s(): software timeout\n", printk 2775 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); printk 2877 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR "Only %d sectors for PPB locking supported!\n", printk 3048 drivers/mtd/chips/cfi_cmdset_0002.c printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n"); printk 68 drivers/mtd/chips/cfi_cmdset_0020.c printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport); printk 69 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported"); printk 70 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported"); printk 71 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported"); printk 72 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported"); printk 73 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported"); printk 74 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported"); printk 75 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported"); printk 76 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported"); printk 77 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported"); printk 80 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Unknown Bit %X: supported\n", i); printk 83 drivers/mtd/chips/cfi_cmdset_0020.c printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport); printk 84 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported"); printk 87 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Unknown Bit %X: supported\n", i); printk 90 drivers/mtd/chips/cfi_cmdset_0020.c printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask); printk 91 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no"); printk 92 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Valid Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no"); printk 95 drivers/mtd/chips/cfi_cmdset_0020.c printk(" - Unknown Bit %X Active: yes\n",i); printk 98 drivers/mtd/chips/cfi_cmdset_0020.c printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", printk 101 drivers/mtd/chips/cfi_cmdset_0020.c printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", printk 133 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR " Unknown ST Microelectronics" printk 214 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); printk 222 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_DEBUG "%d: offset=0x%llx,size=0x%x,blocks=%d\n", printk 300 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "Chip not ready after erase " printk 340 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]); printk 445 drivers/mtd/chips/cfi_cmdset_0020.c printk("%s: chip->state[%d]\n", __func__, chip->state); printk 463 drivers/mtd/chips/cfi_cmdset_0020.c printk("%s: 1 status[%x]\n", __func__, map_read(map, cmd_adr)); printk 474 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n", printk 516 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]); printk 567 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n"); printk 592 drivers/mtd/chips/cfi_cmdset_0020.c printk("%s: 2 status[%lx]\n", __func__, status.x[0]); printk 622 drivers/mtd/chips/cfi_cmdset_0020.c printk("%s: map_bankwidth(map)[%x]\n", __func__, map_bankwidth(map)); printk 623 drivers/mtd/chips/cfi_cmdset_0020.c printk("%s: chipnum[%x] wbufsize[%x]\n", __func__, chipnum, wbufsize); printk 624 drivers/mtd/chips/cfi_cmdset_0020.c printk("%s: ofs[%x] len[%x]\n", __func__, ofs, len); printk 769 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for chip to be ready timed out in erase\n"); printk 828 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); printk 858 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n", printk 866 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus); printk 873 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus); printk 877 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus); printk 883 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus); printk 1067 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for chip to be ready timed out in lock\n"); printk 1111 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); printk 1153 drivers/mtd/chips/cfi_cmdset_0020.c printk("before lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); printk 1161 drivers/mtd/chips/cfi_cmdset_0020.c printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); printk 1214 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for chip to be ready timed out in unlock\n"); printk 1258 drivers/mtd/chips/cfi_cmdset_0020.c printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); printk 1297 drivers/mtd/chips/cfi_cmdset_0020.c printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor))); printk 1309 drivers/mtd/chips/cfi_cmdset_0020.c printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); printk 101 drivers/mtd/chips/cfi_probe.c printk(KERN_NOTICE printk 107 drivers/mtd/chips/cfi_probe.c printk(KERN_NOTICE printk 143 drivers/mtd/chips/cfi_probe.c printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", printk 155 drivers/mtd/chips/cfi_probe.c printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", printk 171 drivers/mtd/chips/cfi_probe.c printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", printk 205 drivers/mtd/chips/cfi_probe.c printk("Number of erase regions: %d\n", num_erase_regions); printk 243 drivers/mtd/chips/cfi_probe.c printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n", printk 280 drivers/mtd/chips/cfi_probe.c printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n", printk 343 drivers/mtd/chips/cfi_probe.c printk("Invalid CFI ident structure.\n"); printk 347 drivers/mtd/chips/cfi_probe.c printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID)); printk 349 drivers/mtd/chips/cfi_probe.c printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR); printk 351 drivers/mtd/chips/cfi_probe.c printk("No Primary Algorithm Table\n"); printk 353 drivers/mtd/chips/cfi_probe.c printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID)); printk 355 drivers/mtd/chips/cfi_probe.c printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR); printk 357 drivers/mtd/chips/cfi_probe.c printk("No Alternate Algorithm Table\n"); printk 360 drivers/mtd/chips/cfi_probe.c printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf); printk 361 drivers/mtd/chips/cfi_probe.c printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf); printk 363 drivers/mtd/chips/cfi_probe.c printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf); printk 364 drivers/mtd/chips/cfi_probe.c printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf); printk 367 drivers/mtd/chips/cfi_probe.c printk("No Vpp line\n"); printk 369 drivers/mtd/chips/cfi_probe.c printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp); printk 370 drivers/mtd/chips/cfi_probe.c printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp)); printk 373 drivers/mtd/chips/cfi_probe.c printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp); printk 374 drivers/mtd/chips/cfi_probe.c printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp)); printk 377 drivers/mtd/chips/cfi_probe.c printk("Full buffer write not supported\n"); printk 379 drivers/mtd/chips/cfi_probe.c printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp); printk 380 drivers/mtd/chips/cfi_probe.c printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp)); printk 382 drivers/mtd/chips/cfi_probe.c printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp); printk 383 drivers/mtd/chips/cfi_probe.c printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp)); printk 386 drivers/mtd/chips/cfi_probe.c printk("Chip erase not supported\n"); printk 388 drivers/mtd/chips/cfi_probe.c printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20)); printk 389 drivers/mtd/chips/cfi_probe.c printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc); printk 392 drivers/mtd/chips/cfi_probe.c printk(" - x8-only asynchronous interface\n"); printk 396 drivers/mtd/chips/cfi_probe.c printk(" - x16-only asynchronous interface\n"); printk 400 drivers/mtd/chips/cfi_probe.c printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n"); printk 404 drivers/mtd/chips/cfi_probe.c printk(" - x32-only asynchronous interface\n"); printk 408 drivers/mtd/chips/cfi_probe.c printk(" - supports x16 and x32 via Word# with asynchronous interface\n"); printk 412 drivers/mtd/chips/cfi_probe.c printk(" - Not Allowed / Reserved\n"); printk 416 drivers/mtd/chips/cfi_probe.c printk(" - Unknown\n"); printk 420 drivers/mtd/chips/cfi_probe.c printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize); printk 421 drivers/mtd/chips/cfi_probe.c printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions); printk 310 drivers/mtd/chips/cfi_util.c printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr); printk 103 drivers/mtd/chips/fwh_lock.h printk(KERN_NOTICE "using fwh lock/unlock method\n"); printk 41 drivers/mtd/chips/gen_probe.c printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n", printk 49 drivers/mtd/chips/gen_probe.c printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n"); printk 83 drivers/mtd/chips/gen_probe.c printk(KERN_WARNING "Number of erase regions is zero\n"); printk 110 drivers/mtd/chips/gen_probe.c printk(KERN_WARNING "NOR chip too large to fit in mapping. Attempting to cope...\n"); printk 228 drivers/mtd/chips/gen_probe.c printk(KERN_NOTICE "Support for command set %04X not present\n", type); printk 1983 drivers/mtd/chips/jedec_probe.c printk(KERN_INFO "Found: %s\n",jedec_table[index].name); printk 2072 drivers/mtd/chips/jedec_probe.c printk(KERN_WARNING printk 2169 drivers/mtd/chips/jedec_probe.c printk(KERN_NOTICE printk 2221 drivers/mtd/chips/jedec_probe.c printk(KERN_DEBUG "%s: Found different chip or no chip at all (mfr 0x%x, id 0x%x) at 0x%x\n", printk 2244 drivers/mtd/chips/jedec_probe.c printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", printk 2256 drivers/mtd/chips/jedec_probe.c printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", printk 2272 drivers/mtd/chips/jedec_probe.c printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", printk 268 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.2x\n", __func__, offset, *data); printk 277 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.8x\n", __func__, offset, *data); printk 287 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n", __func__, offset, *data); printk 330 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(): 0x%.8x\n", __func__, offset); printk 351 drivers/mtd/devices/lart.c printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset); printk 364 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len); printk 428 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len); printk 470 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n", __func__, offset, x); printk 493 drivers/mtd/devices/lart.c printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset); printk 506 drivers/mtd/devices/lart.c printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len); printk 603 drivers/mtd/devices/lart.c printk ("MTD driver for LART. Written by Abraham vd Merwe <abraham@2d3d.co.za>\n"); printk 604 drivers/mtd/devices/lart.c printk ("%s: Probing for 28F160x3 flash on LART...\n",module_name); printk 607 drivers/mtd/devices/lart.c printk (KERN_WARNING "%s: Found no LART compatible flash device\n",module_name); printk 610 drivers/mtd/devices/lart.c printk ("%s: This looks like a LART board to me.\n",module_name); printk 626 drivers/mtd/devices/lart.c printk (KERN_DEBUG printk 638 drivers/mtd/devices/lart.c printk (KERN_DEBUG printk 647 drivers/mtd/devices/lart.c printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions)); printk 650 drivers/mtd/devices/lart.c printk (KERN_DEBUG printk 136 drivers/mtd/devices/ms02-nv.c printk(KERN_INFO "%s", version); printk 212 drivers/mtd/devices/ms02-nv.c printk(KERN_ERR printk 217 drivers/mtd/devices/ms02-nv.c printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %zuMiB.\n", printk 145 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, printk 166 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, " printk 183 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_erase() done\n"); printk 197 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); printk 218 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_unpoint()\n"); printk 234 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", printk 255 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, " printk 273 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_read() done\n"); printk 290 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", printk 311 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, " printk 329 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551_write() done\n"); printk 554 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at " printk 565 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" printk 575 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" printk 585 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" printk 595 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" printk 605 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: Memory Access %s\n", printk 607 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: I/O Access %s\n", printk 611 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: Devsel %s\n", printk 616 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n", printk 620 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n" printk 662 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", printk 671 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Invalid aperture size " printk 677 drivers/mtd/devices/pmc551.c printk(KERN_INFO PMC551_VERSION); printk 690 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n", printk 702 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); printk 712 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Using specified memory " printk 731 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: reducing aperture size to " printk 735 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Using existing aperture " printk 739 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Using specified aperture " printk 746 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Unable to map IO space\n"); printk 752 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: setting aperture to %d\n", printk 764 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: aperture set to %d\n", printk 782 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: Failed to register new device\n"); printk 792 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "Registered pmc551 memory device.\n"); printk 793 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n", printk 796 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "Total memory is %d%sB\n", printk 809 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: not detected\n"); printk 812 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found); printk 831 drivers/mtd/devices/pmc551.c printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at " printk 843 drivers/mtd/devices/pmc551.c printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found); printk 52 drivers/mtd/devices/slram.c #define T(fmt, args...) printk(KERN_DEBUG fmt, ## args) printk 53 drivers/mtd/devices/slram.c #define E(fmt, args...) printk(KERN_NOTICE fmt, ## args) printk 174 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: FTL header not found.\n"); printk 180 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n"); printk 184 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n", printk 238 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: format error: too many " printk 259 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: format error: erase units " printk 460 drivers/mtd/ftl.c printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n"); printk 474 drivers/mtd/ftl.c printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n"); printk 493 drivers/mtd/ftl.c printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n"); printk 501 drivers/mtd/ftl.c printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n"); printk 523 drivers/mtd/ftl.c printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n"); printk 533 drivers/mtd/ftl.c printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n"); printk 617 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: reclaim failed: no " printk 647 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: reclaim failed: " printk 660 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n"); printk 678 drivers/mtd/ftl.c printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal); printk 680 drivers/mtd/ftl.c printk(KERN_DEBUG "ftl_cs: unit %d: %d phys, %d free, " printk 718 drivers/mtd/ftl.c printk(KERN_WARNING"ftl: Error reading BAM in find_free\n"); printk 733 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: bad free list!\n"); printk 759 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: bad partition\n"); printk 766 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: bad read offset\n"); printk 779 drivers/mtd/ftl.c printk(KERN_WARNING "Error reading MTD device in ftl_read()\n"); printk 817 drivers/mtd/ftl.c printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret); printk 827 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n"); printk 828 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, old = 0x%x" printk 840 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: set_bam_entry() " printk 842 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, cache" printk 855 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n"); printk 856 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, new = 0x%x\n", printk 873 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: bad partition\n"); printk 888 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: bad write offset\n"); printk 897 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: internal error: " printk 914 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: block write failed!\n"); printk 915 drivers/mtd/ftl.c printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, virt_addr" printk 1013 drivers/mtd/ftl.c printk(KERN_WARNING "No memory to scan for FTL on %s\n", printk 1025 drivers/mtd/ftl.c printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n", printk 47 drivers/mtd/inftlcore.c printk(KERN_ERR printk 66 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: could not mount device\n"); printk 96 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: cannot calculate a geometry to " printk 98 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: using C:%d H:%d S:%d " printk 112 drivers/mtd/inftlcore.c printk(KERN_INFO "INFTL: Found new inftl%c\n", inftl->mbd.devnum + 'a'); printk 227 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: no free blocks found! " printk 256 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: trying to fold non-existent " printk 290 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: unknown status " printk 298 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: infinite loop in Virtual " printk 420 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: endless loop in " printk 439 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: no Virtual Unit Chains available " printk 511 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: infinite loop in " printk 555 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: cannot make free " printk 617 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: error folding to make room for Virtual " printk 643 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: trying to delete non-existent " printk 676 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: unknown status " printk 683 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: infinite loop in Virtual " printk 775 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: unknown status for " printk 782 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: infinite loop in Virtual " printk 826 drivers/mtd/inftlcore.c printk(KERN_WARNING "inftl_writeblock(): cannot find " printk 884 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: unknown status for " printk 891 drivers/mtd/inftlcore.c printk(KERN_WARNING "INFTL: infinite loop in " printk 70 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: block read at 0x%x " printk 75 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: further " printk 92 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: ANAND header found at " printk 110 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Unable to read spare " printk 116 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Primary and spare Media " printk 144 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Media Header sanity check " printk 151 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Media Header sanity check " printk 161 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: sorry, we don't support " printk 166 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: support for INFTL with " printk 210 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Media Header " printk 218 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Media Header " printk 230 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Media Header Partition " printk 240 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: Media Header sanity check " printk 263 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: allocation of PUtable " printk 273 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: allocation of VUtable " printk 395 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: error while formatting block %d\n", printk 438 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: formatting chain at block %d\n", printk 444 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: formatting block %d\n", block); printk 549 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: could not find valid boot record?\n"); printk 562 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: allocation of ANACtable " printk 624 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: corrupt block %d " printk 649 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: corrupt " printk 684 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: invalid previous " printk 728 drivers/mtd/inftlmount.c printk(KERN_WARNING "INFTL: invalid prev %d, " printk 771 drivers/mtd/inftlmount.c printk("INFTL: unreferenced block %d, formatting it\n", printk 117 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_ERR "%s: Flash timeout error state %d \n", printk 161 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_WARNING"%s: Bad status on wait: 0x%x \n", printk 295 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_ERR "%s: suspend operation failed." printk 370 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_ERR "%s: put_chip() called with oldstate %d!\n", printk 447 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_WARNING"%s Buffer program error: %d at %lx; \n", printk 475 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_WARNING"%s Erase block error %d at : %llx\n", printk 590 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_WARNING "%s: Warning: unpoint called on non" printk 715 drivers/mtd/lpddr/lpddr_cmds.c printk(KERN_ERR "%s: block unlock error status %d \n", printk 58 drivers/mtd/lpddr/qinfo_probe.c printk(KERN_ERR"%s qinfo id string is wrong! \n", map->name); printk 115 drivers/mtd/lpddr/qinfo_probe.c printk(KERN_WARNING"%s: PFOW string at 0x%lx is not found \n", printk 153 drivers/mtd/lpddr/qinfo_probe.c printk(KERN_NOTICE"%s Probe at base (0x%08lx) past the end of" printk 198 drivers/mtd/lpddr/qinfo_probe.c printk(KERN_WARNING "Reducing visibility of %ldKiB chip" printk 152 drivers/mtd/maps/amd76xrom.c printk(KERN_ERR MOD_NAME printk 168 drivers/mtd/maps/amd76xrom.c printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", printk 194 drivers/mtd/maps/amd76xrom.c printk(KERN_ERR MOD_NAME ": kmalloc failed"); printk 234 drivers/mtd/maps/amd76xrom.c printk(KERN_WARNING MOD_NAME printk 250 drivers/mtd/maps/amd76xrom.c printk(KERN_ERR MOD_NAME printk 93 drivers/mtd/maps/cfi_flagadm.c printk(KERN_NOTICE "FlagaDM flash device: %x at %x\n", printk 101 drivers/mtd/maps/cfi_flagadm.c printk("Failed to ioremap\n"); printk 111 drivers/mtd/maps/cfi_flagadm.c printk(KERN_NOTICE "FlagaDM flash device initialized\n"); printk 181 drivers/mtd/maps/ck804xrom.c printk(KERN_ERR MOD_NAME printk 196 drivers/mtd/maps/ck804xrom.c printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", printk 224 drivers/mtd/maps/ck804xrom.c printk(KERN_ERR MOD_NAME ": kmalloc failed"); printk 264 drivers/mtd/maps/ck804xrom.c printk(KERN_WARNING MOD_NAME printk 280 drivers/mtd/maps/ck804xrom.c printk(KERN_ERR MOD_NAME printk 172 drivers/mtd/maps/dc21285.c printk (KERN_ERR "DC21285 flash: undefined bankwidth\n"); printk 175 drivers/mtd/maps/dc21285.c printk (KERN_NOTICE "DC21285 flash support (%d-bit bankwidth)\n", printk 181 drivers/mtd/maps/dc21285.c printk("Failed to ioremap\n"); printk 189 drivers/mtd/maps/esb2rom.c printk(KERN_DEBUG "pci_read_config_word : %x\n", word); printk 217 drivers/mtd/maps/esb2rom.c printk(KERN_ERR MOD_NAME ": Rom window is closed\n"); printk 231 drivers/mtd/maps/esb2rom.c printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n"); printk 246 drivers/mtd/maps/esb2rom.c printk(KERN_DEBUG MOD_NAME ": " printk 254 drivers/mtd/maps/esb2rom.c printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", printk 283 drivers/mtd/maps/esb2rom.c printk(KERN_ERR MOD_NAME ": kmalloc failed"); printk 325 drivers/mtd/maps/esb2rom.c printk(KERN_WARNING MOD_NAME printk 341 drivers/mtd/maps/esb2rom.c printk(KERN_ERR MOD_NAME printk 423 drivers/mtd/maps/esb2rom.c printk(KERN_DEBUG "device id = %x\n", id->device); printk 426 drivers/mtd/maps/esb2rom.c printk(KERN_DEBUG "matched device = %x\n", id->device); printk 431 drivers/mtd/maps/esb2rom.c printk(KERN_DEBUG "matched device id %x\n", id->device); printk 434 drivers/mtd/maps/esb2rom.c printk(KERN_DEBUG "retVal = %d\n", retVal); printk 154 drivers/mtd/maps/ichxrom.c printk(KERN_ERR MOD_NAME ": Rom window is closed\n"); printk 166 drivers/mtd/maps/ichxrom.c printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n"); printk 181 drivers/mtd/maps/ichxrom.c printk(KERN_DEBUG MOD_NAME ": " printk 189 drivers/mtd/maps/ichxrom.c printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", printk 218 drivers/mtd/maps/ichxrom.c printk(KERN_ERR MOD_NAME ": kmalloc failed"); printk 261 drivers/mtd/maps/ichxrom.c printk(KERN_WARNING MOD_NAME printk 277 drivers/mtd/maps/ichxrom.c printk(KERN_ERR MOD_NAME printk 68 drivers/mtd/maps/impa7.c printk(KERN_NOTICE MSG_PREFIX "probing 0x%08lx at 0x%08lx\n", printk 74 drivers/mtd/maps/impa7.c printk(MSG_PREFIX "failed to ioremap\n"); printk 226 drivers/mtd/maps/ixp4xx.c printk(KERN_ERR "IXP4XXFlash: map_probe failed\n"); printk 238 drivers/mtd/maps/ixp4xx.c printk(KERN_ERR "Could not parse partitions\n"); printk 76 drivers/mtd/maps/l440gx.c printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n"); printk 84 drivers/mtd/maps/l440gx.c printk(KERN_WARNING "Failed to ioremap L440GX flash region\n"); printk 89 drivers/mtd/maps/l440gx.c printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt); printk 115 drivers/mtd/maps/l440gx.c printk(KERN_WARNING "Could not allocate pm iobase resource\n"); printk 136 drivers/mtd/maps/l440gx.c printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n"); printk 140 drivers/mtd/maps/l440gx.c printk(KERN_NOTICE "JEDEC probe on BIOS chip failed. Using ROM\n"); printk 82 drivers/mtd/maps/netsc520.c printk(KERN_NOTICE "NetSc520 flash device: 0x%Lx at 0x%Lx\n", printk 88 drivers/mtd/maps/netsc520.c printk("Failed to ioremap_nocache\n"); printk 181 drivers/mtd/maps/nettel.c printk("SNAPGEAR: failed to disable MMCR cache??\n"); printk 222 drivers/mtd/maps/nettel.c printk("SNAPGEAR: failed to ioremap() BOOTCS\n"); printk 229 drivers/mtd/maps/nettel.c printk(KERN_NOTICE "SNAPGEAR: AMD flash device size = %dK\n", printk 308 drivers/mtd/maps/nettel.c printk("SNAPGEAR: failed to ioremap() ROMCS1\n"); printk 342 drivers/mtd/maps/nettel.c printk("SNAPGEAR: failed to ioremap() ROMCS1/2\n"); printk 361 drivers/mtd/maps/nettel.c printk(KERN_NOTICE "SNAPGEAR: Intel flash device size = %lldKiB\n", printk 181 drivers/mtd/maps/pci.c printk("%s: enabling expansion ROM\n", pci_name(dev)); printk 24 drivers/mtd/maps/pcmciamtd.c #define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg) printk 50 drivers/mtd/maps/pmcmsp-flash.c #define DEBUG_MARKER printk(KERN_NOTICE "%s[%d]\n", __func__, __LINE__) printk 65 drivers/mtd/maps/pmcmsp-flash.c printk(KERN_NOTICE "Single PC Card mode: no flash access\n"); printk 76 drivers/mtd/maps/pmcmsp-flash.c printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt); printk 99 drivers/mtd/maps/pmcmsp-flash.c printk(KERN_NOTICE "Skipping flash device %d " printk 120 drivers/mtd/maps/pmcmsp-flash.c printk(KERN_NOTICE printk 176 drivers/mtd/maps/pmcmsp-flash.c printk(KERN_ERR "map probe failed for flash\n"); printk 67 drivers/mtd/maps/pxa2xx-flash.c printk(KERN_WARNING "Failed to ioremap %s\n", printk 73 drivers/mtd/maps/pxa2xx-flash.c printk(KERN_WARNING "Failed to ioremap cached %s\n", printk 78 drivers/mtd/maps/pxa2xx-flash.c printk(KERN_NOTICE printk 82 drivers/mtd/maps/sa1100-flash.c printk(KERN_WARNING "SA1100 flash: unknown base address " printk 123 drivers/mtd/maps/sa1100-flash.c printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n", printk 185 drivers/mtd/maps/sbc_gxx.c printk( KERN_ERR"%s: failed to ioremap memory region\n", printk 191 drivers/mtd/maps/sbc_gxx.c printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n", printk 199 drivers/mtd/maps/sbc_gxx.c printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n", printk 202 drivers/mtd/maps/sc520cdp.c printk(KERN_NOTICE "Could not find PAR responsible for %s\n", printk 204 drivers/mtd/maps/sc520cdp.c printk(KERN_NOTICE "Trying default address 0x%lx\n", printk 224 drivers/mtd/maps/sc520cdp.c printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n", printk 231 drivers/mtd/maps/sc520cdp.c printk("Failed to ioremap_nocache\n"); printk 81 drivers/mtd/maps/scb2_flash.c printk(KERN_ERR MODNAME ": unsupported InterfaceDesc: %#x\n", printk 149 drivers/mtd/maps/scb2_flash.c printk(KERN_WARNING MODNAME printk 157 drivers/mtd/maps/scb2_flash.c printk(KERN_ERR MODNAME ": Failed to ioremap window!\n"); printk 173 drivers/mtd/maps/scb2_flash.c printk(KERN_ERR MODNAME ": flash probe failed!\n"); printk 190 drivers/mtd/maps/scb2_flash.c printk(KERN_NOTICE MODNAME ": chip size 0x%llx at offset 0x%llx\n", printk 84 drivers/mtd/maps/scx200_docflash.c printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n"); printk 126 drivers/mtd/maps/scx200_docflash.c printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); printk 134 drivers/mtd/maps/scx200_docflash.c printk(KERN_ERR NAME ": invalid size for flash mapping\n"); printk 139 drivers/mtd/maps/scx200_docflash.c printk(KERN_ERR NAME ": invalid bus width for flash mapping\n"); printk 147 drivers/mtd/maps/scx200_docflash.c printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n"); printk 153 drivers/mtd/maps/scx200_docflash.c printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl); printk 167 drivers/mtd/maps/scx200_docflash.c printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n", printk 181 drivers/mtd/maps/scx200_docflash.c printk(KERN_ERR NAME ": failed to ioremap the flash\n"); printk 188 drivers/mtd/maps/scx200_docflash.c printk(KERN_ERR NAME ": unable to detect flash\n"); printk 195 drivers/mtd/maps/scx200_docflash.c printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n"); printk 46 drivers/mtd/maps/solutionengine.c printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n"); printk 50 drivers/mtd/maps/solutionengine.c printk(KERN_NOTICE "Probing for flash chips at 0x01000000:\n"); printk 58 drivers/mtd/maps/solutionengine.c printk(KERN_NOTICE "Flash chips not detected at either possible location.\n"); printk 62 drivers/mtd/maps/solutionengine.c printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n", printk 59 drivers/mtd/maps/sun_uflash.c printk(KERN_ERR PFX "Unsupported device at %pOF, 0x%llx\n", printk 67 drivers/mtd/maps/sun_uflash.c printk(KERN_ERR PFX "Cannot allocate struct uflash_dev\n"); printk 85 drivers/mtd/maps/sun_uflash.c printk(KERN_ERR PFX "Failed to map device.\n"); printk 62 drivers/mtd/maps/ts5500_flash.c printk(KERN_ERR "Failed to ioremap_nocache\n"); printk 83 drivers/mtd/maps/uclinux.c printk("uclinux[mtd]: probe address=0x%x size=0x%x\n", printk 95 drivers/mtd/maps/uclinux.c printk("uclinux[mtd]: no virtual mapping?\n"); printk 103 drivers/mtd/maps/uclinux.c printk("uclinux[mtd]: failed to find a mapping?\n"); printk 564 drivers/mtd/mtd_blkdevs.c printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n", printk 59 drivers/mtd/mtdblock.c printk (KERN_WARNING "mtdblock: erase of region [0x%lx, 0x%x] " printk 607 drivers/mtd/mtdconcat.c printk(KERN_NOTICE "Concatenating MTD devices:\n"); printk 609 drivers/mtd/mtdconcat.c printk(KERN_NOTICE "(%d): \"%s\"\n", i, subdev[i]->name); printk 610 drivers/mtd/mtdconcat.c printk(KERN_NOTICE "into device \"%s\"\n", name); printk 616 drivers/mtd/mtdconcat.c printk printk 659 drivers/mtd/mtdconcat.c printk("Incompatible device type on \"%s\"\n", printk 671 drivers/mtd/mtdconcat.c printk("Incompatible device flags on \"%s\"\n", printk 690 drivers/mtd/mtdconcat.c printk("Incompatible OOB or ECC data on \"%s\"\n", printk 775 drivers/mtd/mtdconcat.c printk printk 659 drivers/mtd/mtdcore.c printk(KERN_WARNING printk 743 drivers/mtd/mtdcore.c printk(KERN_NOTICE "Removing MTD device #%d (%s) with use count %d\n", printk 88 drivers/mtd/mtdoops.c printk(KERN_WARNING "mtdoops: erase of region [0x%llx, 0x%llx] on \"%s\" failed\n", printk 115 drivers/mtd/mtdoops.c printk(KERN_DEBUG "mtdoops: ready %d, %d (no erase)\n", printk 140 drivers/mtd/mtdoops.c printk(KERN_WARNING "mtdoops: bad block at %08lx\n", printk 147 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: all blocks bad!\n"); printk 153 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: mtd_block_isbad failed, aborting\n"); printk 161 drivers/mtd/mtdoops.c printk(KERN_DEBUG "mtdoops: ready %d, %d\n", printk 169 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n"); printk 192 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n"); printk 200 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: write failure at %ld (%td of %ld written), error %d\n", printk 232 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n", printk 303 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: MTD partition %d not big enough for mtdoops\n", printk 308 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: eraseblock size of MTD partition %d too small\n", printk 313 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: mtd%d is too large (limit is %d MiB)\n", printk 324 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: could not allocate page array\n"); printk 332 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: registering kmsg dumper failed, error %d\n", err); printk 341 drivers/mtd/mtdoops.c printk(KERN_INFO "mtdoops: Attached to MTD device %d\n", mtd->index); printk 352 drivers/mtd/mtdoops.c printk(KERN_WARNING "mtdoops: could not unregister kmsg_dumper\n"); printk 372 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: mtd device (mtddev=name/number) must be supplied\n"); printk 376 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: record_size must be a multiple of 4096\n"); printk 380 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: record_size must be over 4096 bytes\n"); printk 392 drivers/mtd/mtdoops.c printk(KERN_ERR "mtdoops: failed to allocate buffer workspace\n"); printk 335 drivers/mtd/mtdpart.c printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n", printk 440 drivers/mtd/mtdpart.c printk(KERN_NOTICE "Moving partition %d: " printk 451 drivers/mtd/mtdpart.c printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n", printk 461 drivers/mtd/mtdpart.c printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset, printk 473 drivers/mtd/mtdpart.c printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n", printk 479 drivers/mtd/mtdpart.c printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n", printk 523 drivers/mtd/mtdpart.c printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n", printk 531 drivers/mtd/mtdpart.c printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n", printk 575 drivers/mtd/mtdpart.c printk(KERN_WARNING printk 718 drivers/mtd/mtdpart.c printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); printk 1336 drivers/mtd/mtdswap.c printk(KERN_ERR "%s: init failed (%d)\n", MTDSWAP_PREFIX, ret); printk 1367 drivers/mtd/mtdswap.c printk(KERN_ERR "%s: Erase size %u not multiple of PAGE_SIZE " printk 1373 drivers/mtd/mtdswap.c printk(KERN_ERR "%s: PAGE_SIZE %lu not multiple of write size" printk 1379 drivers/mtd/mtdswap.c printk(KERN_ERR "%s: Not enough free bytes in OOB, " printk 1392 drivers/mtd/mtdswap.c printk(KERN_WARNING "%s: Device too large. Limiting size to " printk 1403 drivers/mtd/mtdswap.c printk(KERN_ERR "%s: Not enough erase blocks. %u available, " printk 1420 drivers/mtd/mtdswap.c printk(KERN_INFO "%s: Enabling MTD swap on device %lu, size %llu KB, " printk 131 drivers/mtd/nand/onenand/omap2.c printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n", printk 138 drivers/mtd/nand/onenand/omap2.c printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x " printk 275 drivers/mtd/nand/onenand/omap2.c printk(KERN_ERR "onenand_wait: ECC error = " printk 281 drivers/mtd/nand/onenand/omap2.c printk(KERN_NOTICE "onenand_wait: correctable " printk 295 drivers/mtd/nand/onenand/omap2.c printk(KERN_ERR "onenand_wait: " printk 586 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: ECC error = 0x%04x\n", printk 591 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "%s: correctable ECC error = 0x%04x\n", printk 597 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n", printk 603 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n", printk 609 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: timeout! ctrl=0x%04x intr=0x%04x\n", printk 616 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: controller error = 0x%04x\n", printk 619 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: it's locked error.\n", __func__); printk 678 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "OneNAND: There's no interrupt. " printk 1101 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "%s: Attempting to recover from uncorrectable read\n", printk 1141 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempt read beyond end of device\n", printk 1242 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempt read beyond end of device\n", printk 1376 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempted to start read outside oob\n", printk 1400 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: read failed = 0x%x\n", printk 1501 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "%s: ecc 0x%04x ctrl 0x%04x " printk 1507 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: read timeout! ctrl 0x%04x " printk 1515 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "%s: ctrl 0x%04x intr 0x%04x addr1 %#x " printk 1548 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempt read beyond end of device\n", printk 1718 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempt to write not page aligned data\n", printk 1813 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempt to write not page aligned data\n", printk 1882 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: write failed %d\n", printk 1891 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: verify failed %d\n", printk 1922 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: write failed %d\n", printk 1930 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: verify failed %d\n", printk 2001 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempted to start write outside oob\n", printk 2008 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Attempt to write past end of page\n", printk 2051 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: write failed %d\n", __func__, ret); printk 2057 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: verify failed %d\n", printk 2139 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Failed verify, block %d\n", printk 2179 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_WARNING "%s: attempt to erase a bad block " printk 2218 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Failed multiblock erase, " printk 2238 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Failed erase, block %d\n", printk 2291 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_WARNING "%s: attempt to erase a bad block " printk 2304 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Failed erase, block %d\n", printk 2323 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Unaligned address\n", printk 2369 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Unaligned address\n", __func__); printk 2375 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Length not block aligned\n", __func__); printk 2535 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: wp status = 0x%x\n", printk 2565 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n", printk 2633 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n", printk 2850 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: write failed %d\n", __func__, ret); printk 2862 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); printk 2863 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "1st Block\tLOCKED\n"); printk 2864 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "OTP Block\tLOCKED\n"); printk 2866 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); printk 2867 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "1st Block\tLOCKED\n"); printk 2868 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n"); printk 2870 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); printk 2871 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "1st Block\tUN-LOCKED\n"); printk 2872 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "OTP Block\tLOCKED\n"); printk 2874 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Reboot to check\n"); printk 3231 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n"); printk 3319 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); printk 3321 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Chip support all block unlock\n"); printk 3323 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Chip has 2 plane\n"); printk 3325 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Chip has 4KiB pagesize\n"); printk 3327 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Chip has cache program feature\n"); printk 3346 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", printk 3353 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "OneNAND version = 0x%04x\n", version); printk 3382 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf); printk 3418 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "Die %d boundary: %d%s\n", die, printk 3483 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions); printk 3485 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x," printk 3527 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end); printk 3547 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_WARNING "%s: Block %d not erased.\n", printk 3580 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Invalid boundary value. " printk 3590 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Please erase blocks " printk 3604 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: boundary locked\n", __func__); printk 3609 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "Changing die %d boundary: %d%s\n", printk 3620 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Failed PI erase for Die %d\n", printk 3629 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: Failed PI write for Die %d\n", printk 3809 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_ERR "%s: resume() called for the chip which is not " printk 3860 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_INFO "OneNAND Sync. Burst Read support\n"); printk 3923 drivers/mtd/nand/onenand/onenand_base.c printk(KERN_WARNING "%s: No OOB scheme defined for oobsize %d\n", printk 67 drivers/mtd/nand/onenand/onenand_bbt.c printk(KERN_INFO "Scanning device for bad blocks\n"); printk 104 drivers/mtd/nand/onenand/onenand_bbt.c printk(KERN_INFO "OneNAND eraseblock %d is an " printk 201 drivers/mtd/nand/onenand/onenand_bbt.c printk(KERN_ERR "onenand_scan_bbt: Can't scan flash and build the RAM-based BBT\n"); printk 171 drivers/mtd/nand/onenand/samsung.c printk(KERN_INFO "0x%08X: 0x%08x 0x%08x 0x%08x 0x%08x\n", printk 270 drivers/mtd/nand/raw/cafe_nand.c printk("About to write command %08x to register 0\n", ctl1); printk 272 drivers/mtd/nand/raw/cafe_nand.c printk("Register %x: %08x\n", i, readl(cafe->mmio + i)); printk 438 drivers/mtd/nand/raw/cafe_nand.c printk("Register %x: %08x\n", i, readl(cafe->mmio + i)); printk 244 drivers/mtd/nand/raw/diskonchip.c printk("_DoC_WaitReady...\n"); printk 249 drivers/mtd/nand/raw/diskonchip.c printk("_DoC_WaitReady timed out.\n"); printk 258 drivers/mtd/nand/raw/diskonchip.c printk("_DoC_WaitReady timed out.\n"); printk 290 drivers/mtd/nand/raw/diskonchip.c printk("DoC_WaitReady OK\n"); printk 300 drivers/mtd/nand/raw/diskonchip.c printk("write_byte %02x\n", datum); printk 315 drivers/mtd/nand/raw/diskonchip.c printk("read_byte returns %02x\n", ret); printk 326 drivers/mtd/nand/raw/diskonchip.c printk("writebuf of %d bytes: ", len); printk 330 drivers/mtd/nand/raw/diskonchip.c printk("%02x ", buf[i]); printk 333 drivers/mtd/nand/raw/diskonchip.c printk("\n"); printk 343 drivers/mtd/nand/raw/diskonchip.c printk("readbuf of %d bytes: ", len); printk 356 drivers/mtd/nand/raw/diskonchip.c printk("readbuf_dword of %d bytes: ", len); printk 512 drivers/mtd/nand/raw/diskonchip.c printk("read_byte returns %02x\n", ret); printk 523 drivers/mtd/nand/raw/diskonchip.c printk("writebuf of %d bytes: ", len); printk 527 drivers/mtd/nand/raw/diskonchip.c printk("%02x ", buf[i]); printk 530 drivers/mtd/nand/raw/diskonchip.c printk("\n"); printk 540 drivers/mtd/nand/raw/diskonchip.c printk("readbuf of %d bytes: ", len); printk 549 drivers/mtd/nand/raw/diskonchip.c printk("%02x ", buf[i]); printk 555 drivers/mtd/nand/raw/diskonchip.c printk("%02x ", buf[len - 2]); printk 558 drivers/mtd/nand/raw/diskonchip.c printk("%02x ", buf[len - 1]); printk 560 drivers/mtd/nand/raw/diskonchip.c printk("\n"); printk 570 drivers/mtd/nand/raw/diskonchip.c printk("select chip (%d)\n", chip); printk 596 drivers/mtd/nand/raw/diskonchip.c printk("select chip (%d)\n", chip); printk 628 drivers/mtd/nand/raw/diskonchip.c printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl); printk 694 drivers/mtd/nand/raw/diskonchip.c printk("high density\n"); printk 757 drivers/mtd/nand/raw/diskonchip.c printk("not ready\n"); printk 761 drivers/mtd/nand/raw/diskonchip.c printk("was ready\n"); printk 768 drivers/mtd/nand/raw/diskonchip.c printk("not ready\n"); printk 774 drivers/mtd/nand/raw/diskonchip.c printk("was ready\n"); printk 725 drivers/mtd/nand/raw/nandsim.c printk("flash size: %llu MiB\n", printk 727 drivers/mtd/nand/raw/nandsim.c printk("page size: %u bytes\n", ns->geom.pgsz); printk 728 drivers/mtd/nand/raw/nandsim.c printk("OOB area size: %u bytes\n", ns->geom.oobsz); printk 729 drivers/mtd/nand/raw/nandsim.c printk("sector size: %u KiB\n", ns->geom.secsz >> 10); printk 730 drivers/mtd/nand/raw/nandsim.c printk("pages number: %u\n", ns->geom.pgnum); printk 731 drivers/mtd/nand/raw/nandsim.c printk("pages per sector: %u\n", ns->geom.pgsec); printk 732 drivers/mtd/nand/raw/nandsim.c printk("bus width: %u\n", ns->busw); printk 733 drivers/mtd/nand/raw/nandsim.c printk("bits in sector size: %u\n", ns->geom.secshift); printk 734 drivers/mtd/nand/raw/nandsim.c printk("bits in page size: %u\n", ns->geom.pgshift); printk 735 drivers/mtd/nand/raw/nandsim.c printk("bits in OOB size: %u\n", ffs(ns->geom.oobsz) - 1); printk 736 drivers/mtd/nand/raw/nandsim.c printk("flash size with OOB: %llu KiB\n", printk 738 drivers/mtd/nand/raw/nandsim.c printk("page address bytes: %u\n", ns->geom.pgaddrbytes); printk 739 drivers/mtd/nand/raw/nandsim.c printk("sector address bytes: %u\n", ns->geom.secaddrbytes); printk 740 drivers/mtd/nand/raw/nandsim.c printk("options: %#x\n", ns->options); printk 59 drivers/mtd/nftlcore.c printk(KERN_WARNING "NFTL: could not mount device\n"); printk 89 drivers/mtd/nftlcore.c printk(KERN_WARNING "NFTL: cannot calculate a geometry to " printk 91 drivers/mtd/nftlcore.c printk(KERN_WARNING "NFTL: using C:%d H:%d S:%d " printk 105 drivers/mtd/nftlcore.c printk(KERN_INFO "NFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a'); printk 221 drivers/mtd/nftlcore.c printk("Argh! No free blocks found! LastFreeEUN = %d, " printk 251 drivers/mtd/nftlcore.c printk(KERN_WARNING "Trying to fold non-existent " printk 293 drivers/mtd/nftlcore.c printk(KERN_WARNING printk 302 drivers/mtd/nftlcore.c printk(KERN_WARNING printk 311 drivers/mtd/nftlcore.c printk("Unknown status for block %d in EUN %d: %x\n", printk 317 drivers/mtd/nftlcore.c printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", printk 371 drivers/mtd/nftlcore.c printk(KERN_WARNING printk 418 drivers/mtd/nftlcore.c printk("Error went away on retry.\n"); printk 492 drivers/mtd/nftlcore.c printk("Endless loop in Virtual Chain %d: Unit %x\n", printk 511 drivers/mtd/nftlcore.c printk(KERN_WARNING "No Virtual Unit Chains available for folding. " printk 573 drivers/mtd/nftlcore.c printk(KERN_WARNING printk 618 drivers/mtd/nftlcore.c printk(KERN_WARNING "Cannot make free space.\n"); printk 669 drivers/mtd/nftlcore.c printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", printk 686 drivers/mtd/nftlcore.c printk(KERN_WARNING printk 738 drivers/mtd/nftlcore.c printk("Unknown status for block %ld in EUN %d: %x\n", printk 744 drivers/mtd/nftlcore.c printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%lx\n", printk 61 drivers/mtd/nftlmount.c printk(KERN_WARNING "Block read at 0x%x of mtd%d failed: %d\n", printk 64 drivers/mtd/nftlmount.c printk(KERN_WARNING "Further failures for this block will not be printed\n"); printk 72 drivers/mtd/nftlmount.c printk(KERN_DEBUG "ANAND header not found at 0x%x in mtd%d\n", printk 83 drivers/mtd/nftlmount.c printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n", printk 93 drivers/mtd/nftlmount.c printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but erase mark not present (0x%04x,0x%04x instead)\n", printk 103 drivers/mtd/nftlmount.c printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n", printk 110 drivers/mtd/nftlmount.c printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but went away on reread!\n", printk 112 drivers/mtd/nftlmount.c printk(KERN_NOTICE "New data are: %6ph\n", buf); printk 122 drivers/mtd/nftlmount.c printk(KERN_NOTICE "NFTL Media Headers at 0x%x and 0x%x disagree.\n", printk 151 drivers/mtd/nftlmount.c printk(KERN_NOTICE "NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we know what it means...\n"); printk 153 drivers/mtd/nftlmount.c printk(KERN_NOTICE "Sorry, we don't support UnitSizeFactor 0x%02x\n", printk 157 drivers/mtd/nftlmount.c printk(KERN_NOTICE "WARNING: Support for NFTL with UnitSizeFactor 0x%02x is experimental\n", printk 165 drivers/mtd/nftlmount.c printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n"); printk 166 drivers/mtd/nftlmount.c printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n", printk 173 drivers/mtd/nftlmount.c printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n"); printk 174 drivers/mtd/nftlmount.c printk(KERN_NOTICE "numvunits (%d) > nb_blocks (%d) - nb_boot_blocks(%d) - 2\n", printk 192 drivers/mtd/nftlmount.c printk(KERN_NOTICE "NFTL: allocation of EUNtable failed\n"); printk 201 drivers/mtd/nftlmount.c printk(KERN_NOTICE "NFTL: allocation of ReplUnitTable failed\n"); printk 227 drivers/mtd/nftlmount.c printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n", printk 332 drivers/mtd/nftlmount.c printk("Error while formatting block %d\n", block); printk 398 drivers/mtd/nftlmount.c printk("Incorrect free sector %d in block %d: " printk 419 drivers/mtd/nftlmount.c printk("incorrect ReplUnitTable[] : %d\n", block); printk 435 drivers/mtd/nftlmount.c printk("nftl: length too long %d !\n", length); printk 441 drivers/mtd/nftlmount.c printk("incorrect ReplUnitTable[] : %d\n", block); printk 462 drivers/mtd/nftlmount.c printk("Formatting chain at block %d\n", first_block); printk 467 drivers/mtd/nftlmount.c printk("Formatting block %d\n", block); printk 479 drivers/mtd/nftlmount.c printk("incorrect ReplUnitTable[] : %d\n", block); printk 578 drivers/mtd/nftlmount.c printk("Could not find valid boot record\n"); printk 623 drivers/mtd/nftlmount.c printk("Formatting block %d\n", block); printk 639 drivers/mtd/nftlmount.c printk("Block %d: free but referenced in chain %d\n", printk 657 drivers/mtd/nftlmount.c printk("Block %d: incorrect logical block: %d expected: %d\n", printk 669 drivers/mtd/nftlmount.c printk("Block %d: incorrectly marked as first block in chain\n", printk 675 drivers/mtd/nftlmount.c printk("Block %d: folding in progress - ignoring first block flag\n", printk 686 drivers/mtd/nftlmount.c printk("Block %d: referencing invalid block %d\n", printk 701 drivers/mtd/nftlmount.c printk("Block %d: folding in progress - ignoring first block flag\n", printk 706 drivers/mtd/nftlmount.c printk("Block %d: referencing block %d already in another chain\n", printk 733 drivers/mtd/nftlmount.c printk("Could read foldmark at block %d\n", first_block); printk 747 drivers/mtd/nftlmount.c printk("Two chains at blocks %d (len=%d) and %d (len=%d)\n", printk 772 drivers/mtd/nftlmount.c printk("Unreferenced block %d, formatting it\n", block); printk 88 drivers/mtd/parsers/afs.c printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n", printk 108 drivers/mtd/parsers/afs.c printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n", printk 147 drivers/mtd/parsers/afs.c printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n", printk 184 drivers/mtd/parsers/afs.c printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n", printk 209 drivers/mtd/parsers/afs.c printk(" mtd: at 0x%08x, %5lluKiB, %8u, %s\n", printk 96 drivers/mtd/parsers/ar7part.c printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum); printk 49 drivers/mtd/parsers/cmdlinepart.c #define dbg(x) do { printk("DEBUG-CMDLINE-PART: "); printk x; } while(0) printk 93 drivers/mtd/parsers/redboot.c printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); printk 111 drivers/mtd/parsers/redboot.c printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", printk 182 drivers/mtd/parsers/redboot.c printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", printk 124 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX printk 132 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX printk 196 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "'%s': unable to allocate memory for " printk 220 drivers/mtd/rfd_ftl.c printk(KERN_NOTICE PREFIX "no RFD magic found in '%s'\n", printk 227 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "'%s': no empty erase unit found\n", printk 261 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "error reading '%s' at " printk 288 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "erase of region %llx,%llx on '%s' " printk 346 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error reading '%s' at " printk 386 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "'%s': Unable to " printk 536 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "'%s': unable to read header at " printk 568 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error writing '%s' at " printk 640 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", printk 659 drivers/mtd/rfd_ftl.c printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", printk 739 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "please provide block_size"); printk 752 drivers/mtd/rfd_ftl.c printk(KERN_WARNING PREFIX "'%s': errors found, " printk 757 drivers/mtd/rfd_ftl.c printk(KERN_INFO PREFIX "name: '%s' type: %d flags %x\n", printk 72 drivers/mtd/sm_ftl.h printk(KERN_WARNING "sm_ftl" ": " format "\n", ## __VA_ARGS__) printk 76 drivers/mtd/sm_ftl.h printk(KERN_DEBUG "sm_ftl" ": " format "\n", ## __VA_ARGS__) printk 80 drivers/mtd/sm_ftl.h printk(KERN_DEBUG "sm_ftl" ": " format "\n", ## __VA_ARGS__) printk 128 drivers/mtd/ssfdc.c printk(KERN_WARNING printk 348 drivers/mtd/ssfdc.c printk(KERN_INFO "SSFDC_RO: Found ssfdc%c on mtd%d (%s)\n", printk 440 drivers/mtd/ssfdc.c printk(KERN_INFO "SSFDC read-only Flash Translation layer\n"); printk 332 drivers/mtd/tests/nandbiterrs.c printk("\n"); printk 333 drivers/mtd/tests/nandbiterrs.c printk(KERN_INFO "==================================================\n"); printk 395 drivers/mtd/tests/nandbiterrs.c printk(KERN_INFO "==================================================\n"); printk 344 drivers/mtd/tests/oobtest.c printk(KERN_INFO "\n"); printk 345 drivers/mtd/tests/oobtest.c printk(KERN_INFO "=================================================\n"); printk 725 drivers/mtd/tests/oobtest.c printk(KERN_INFO "=================================================\n"); printk 325 drivers/mtd/tests/pagetest.c printk(KERN_INFO "\n"); printk 326 drivers/mtd/tests/pagetest.c printk(KERN_INFO "=================================================\n"); printk 448 drivers/mtd/tests/pagetest.c printk(KERN_INFO "=================================================\n"); printk 93 drivers/mtd/tests/readtest.c printk(KERN_CRIT "%s\n", line); printk 108 drivers/mtd/tests/readtest.c printk(KERN_CRIT "%s\n", line); printk 118 drivers/mtd/tests/readtest.c printk(KERN_INFO "\n"); printk 119 drivers/mtd/tests/readtest.c printk(KERN_INFO "=================================================\n"); printk 202 drivers/mtd/tests/readtest.c printk(KERN_INFO "=================================================\n"); printk 180 drivers/mtd/tests/speedtest.c printk(KERN_INFO "\n"); printk 181 drivers/mtd/tests/speedtest.c printk(KERN_INFO "=================================================\n"); printk 406 drivers/mtd/tests/speedtest.c printk(KERN_INFO "=================================================\n"); printk 142 drivers/mtd/tests/stresstest.c printk(KERN_INFO "\n"); printk 143 drivers/mtd/tests/stresstest.c printk(KERN_INFO "=================================================\n"); printk 228 drivers/mtd/tests/stresstest.c printk(KERN_INFO "=================================================\n"); printk 112 drivers/mtd/tests/subpagetest.c printk("%02x", *p++); printk 113 drivers/mtd/tests/subpagetest.c printk("\n"); printk 274 drivers/mtd/tests/subpagetest.c printk(KERN_INFO "\n"); printk 275 drivers/mtd/tests/subpagetest.c printk(KERN_INFO "=================================================\n"); printk 424 drivers/mtd/tests/subpagetest.c printk(KERN_INFO "=================================================\n"); printk 174 drivers/mtd/tests/torturetest.c printk(KERN_INFO "\n"); printk 175 drivers/mtd/tests/torturetest.c printk(KERN_INFO "=================================================\n"); printk 352 drivers/mtd/tests/torturetest.c printk(KERN_INFO "=================================================\n"); printk 402 drivers/mtd/tests/torturetest.c printk("-------------------------------------------------------" printk 423 drivers/mtd/tests/torturetest.c printk("Offset Read Written\n"); printk 425 drivers/mtd/tests/torturetest.c printk("0x%08x: ", start + i); printk 428 drivers/mtd/tests/torturetest.c printk(" %02x", read[start + i + j1]); printk 434 drivers/mtd/tests/torturetest.c printk(" "); printk 438 drivers/mtd/tests/torturetest.c printk(" %s ", diff); printk 441 drivers/mtd/tests/torturetest.c printk(" %02x", written[start + i + j2]); printk 442 drivers/mtd/tests/torturetest.c printk("\n"); printk 283 drivers/net/appletalk/cops.c printk("%s", version); printk 349 drivers/net/appletalk/cops.c printk("%s: %s at %#3x, using IRQ %d, in Dayna mode.\n", printk 353 drivers/net/appletalk/cops.c printk("%s: %s at %#3x, IRQ %d, in Tangent mode\n", printk 356 drivers/net/appletalk/cops.c printk("%s: %s at %#3x, using polled IO, in Tangent mode.\n", printk 435 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: No irq line set\n", dev->name); printk 538 drivers/net/appletalk/cops.c printk(KERN_INFO "%s; unsupported board type.\n", dev->name); printk 545 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: Firmware is not length of FFDRV.BIN.\n", dev->name); printk 550 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: Firmware is not length of DRVCODE.BIN.\n", dev->name); printk 582 drivers/net/appletalk/cops.c printk("%s: Uploaded firmware - %d bytes of %d bytes.\n", printk 664 drivers/net/appletalk/cops.c printk(KERN_DEBUG "%s: Node ID %d has been acquired.\n", printk 773 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: DMA timed out.\n",dev->name); printk 789 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", printk 811 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: Bad packet length of %d bytes.\n", printk 829 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: Bad packet type %d.\n", dev->name, rsp_type); printk 856 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: No TX complete interrupt.\n", dev->name); printk 858 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: Transmit timed out.\n", dev->name); printk 921 drivers/net/appletalk/cops.c printk("%s: set_multicast_list executed\n", dev->name); printk 989 drivers/net/appletalk/cops.c printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", printk 80 drivers/net/appletalk/ipddp.c printk(version); printk 104 drivers/net/appletalk/ipddp.c printk("%s: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>\n", printk 107 drivers/net/appletalk/ipddp.c printk("%s: Appletalk-IP Decap. mode by Jay Schulist <jschlst@samba.org>\n", printk 299 drivers/net/appletalk/ltpc.c printk("enqueued a 0x%02x command\n",qel->cbuf[0]); printk 318 drivers/net/appletalk/ltpc.c printk(KERN_DEBUG "ltpc: dequeued command "); printk 321 drivers/net/appletalk/ltpc.c for(i=0;i<n;i++) printk("%02x ",qel->cbuf[i]); printk 322 drivers/net/appletalk/ltpc.c printk("\n"); printk 388 drivers/net/appletalk/ltpc.c if ( wait_timeout(dev,0xfc) ) printk("timed out in handlefc\n"); printk 410 drivers/net/appletalk/ltpc.c if ( wait_timeout(dev,0xfd) ) printk("timed out in handlefd\n"); printk 436 drivers/net/appletalk/ltpc.c printk("timed out in handlewrite, dma res %d\n", printk 462 drivers/net/appletalk/ltpc.c if ( wait_timeout(dev,0xfb) ) printk("timed out in handleread\n"); printk 482 drivers/net/appletalk/ltpc.c if ( wait_timeout(dev,0xfa) ) printk("timed out in handlecommand\n"); printk 522 drivers/net/appletalk/ltpc.c printk("idle: looped too many times\n"); printk 532 drivers/net/appletalk/ltpc.c if (debug & DEBUG_LOWER) printk("idle: fc\n"); printk 537 drivers/net/appletalk/ltpc.c if(debug & DEBUG_LOWER) printk("idle: fd\n"); printk 542 drivers/net/appletalk/ltpc.c if (debug & DEBUG_LOWER) printk("idle: f9\n"); printk 556 drivers/net/appletalk/ltpc.c printk("timed out idle f9\n"); printk 564 drivers/net/appletalk/ltpc.c printk("timed out idle f8\n"); printk 571 drivers/net/appletalk/ltpc.c if(debug & DEBUG_LOWER) printk("idle: fa\n"); printk 578 drivers/net/appletalk/ltpc.c printk("ltpc: sent command "); printk 582 drivers/net/appletalk/ltpc.c printk("%02x ",ltdmacbuf[i]); printk 583 drivers/net/appletalk/ltpc.c printk("\n"); printk 602 drivers/net/appletalk/ltpc.c printk("trouble: response command already queued\n"); printk 609 drivers/net/appletalk/ltpc.c if(debug & DEBUG_LOWER) printk("idle: fb\n"); printk 666 drivers/net/appletalk/ltpc.c printk("ltpc: could not allocate mbox\n"); printk 690 drivers/net/appletalk/ltpc.c printk("ltpc: could not allocate mbox\n"); printk 729 drivers/net/appletalk/ltpc.c printk("unknown command 0x%02x from ltpc card\n",ltc->command); printk 741 drivers/net/appletalk/ltpc.c printk(KERN_INFO "%s: nonsense length in ltpc command 0x14: 0x%08x\n", printk 747 drivers/net/appletalk/ltpc.c printk(KERN_INFO "%s: unknown LLAP type: %d\n",dev->name,llaptype); printk 755 drivers/net/appletalk/ltpc.c printk("%s: dropping packet due to memory squeeze.\n", printk 793 drivers/net/appletalk/ltpc.c printk("ltpc_interrupt: unknown device.\n"); printk 826 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("ltpc_ioctl called\n"); printk 878 drivers/net/appletalk/ltpc.c printk("ltpc poll is alive\n"); printk 908 drivers/net/appletalk/ltpc.c printk("command "); printk 910 drivers/net/appletalk/ltpc.c printk("%02x ",((unsigned char *)&cbuf)[i]); printk 911 drivers/net/appletalk/ltpc.c printk("\n"); printk 918 drivers/net/appletalk/ltpc.c printk("sent %d ddp bytes\n",skb->len); printk 920 drivers/net/appletalk/ltpc.c printk("%02x ", hdr[i]); printk 921 drivers/net/appletalk/ltpc.c printk("\n"); printk 1047 drivers/net/appletalk/ltpc.c printk(KERN_ERR "LocalTalk card not found; 220 = %02x, 240 = %02x.\n", x,y); printk 1066 drivers/net/appletalk/ltpc.c printk(KERN_ERR "ltpc: probe at %#x failed to detect IRQ line.\n", io); printk 1075 drivers/net/appletalk/ltpc.c printk(KERN_ERR "ltpc: mem alloc failed\n"); printk 1083 drivers/net/appletalk/ltpc.c printk("ltdmabuf pointer %08lx\n",(unsigned long) ltdmabuf); printk 1109 drivers/net/appletalk/ltpc.c printk(KERN_ERR "No DMA channel found on ltpc card.\n"); printk 1116 drivers/net/appletalk/ltpc.c printk(KERN_INFO "Apple/Farallon LocalTalk-PC card at %03x, IR%d, DMA%d.\n",io,irq,dma); printk 1118 drivers/net/appletalk/ltpc.c printk(KERN_INFO "Apple/Farallon LocalTalk-PC card at %03x, DMA%d. Using polled mode.\n",io,dma); printk 1149 drivers/net/appletalk/ltpc.c printk("setting up timer and irq\n"); printk 1159 drivers/net/appletalk/ltpc.c printk(KERN_ERR "ltpc: IRQ already in use, using polled mode.\n"); printk 1202 drivers/net/appletalk/ltpc.c printk (KERN_ERR printk 1236 drivers/net/appletalk/ltpc.c printk(KERN_NOTICE printk 1248 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("unregister_netdev\n"); printk 1253 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("freeing irq\n"); printk 1258 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("freeing dma\n"); printk 1263 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("freeing ioaddr\n"); printk 1270 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("free_pages\n"); printk 1274 drivers/net/appletalk/ltpc.c if(debug & DEBUG_VERBOSE) printk("returning from cleanup_module\n"); printk 463 drivers/net/caif/caif_spi.c printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n"); printk 643 drivers/net/caif/caif_spi.c printk(KERN_WARNING "CFSPI: failed to create work queue.\n"); printk 754 drivers/net/caif/caif_spi.c printk(KERN_ERR "CFSPI: Reg. error: %d.\n", res); printk 808 drivers/net/caif/caif_spi.c printk(KERN_ERR "Could not register platform SPI driver.\n"); printk 817 drivers/net/caif/caif_spi.c printk(KERN_ERR "Sysfs creation failed 1.\n"); printk 825 drivers/net/caif/caif_spi.c printk(KERN_ERR "Sysfs creation failed 2.\n"); printk 833 drivers/net/caif/caif_spi.c printk(KERN_ERR "Sysfs creation failed 3.\n"); printk 841 drivers/net/caif/caif_spi.c printk(KERN_ERR "Sysfs creation failed 4.\n"); printk 849 drivers/net/caif/caif_spi.c printk(KERN_ERR "Sysfs creation failed 5.\n"); printk 144 drivers/net/can/sja1000/ems_pcmcia.c printk(KERN_INFO "%s: removing %s on channel #%d\n", printk 231 drivers/net/can/sja1000/ems_pcmcia.c printk(KERN_INFO "%s: registered %s on channel " printk 696 drivers/net/can/sja1000/sja1000.c printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME); printk 705 drivers/net/can/sja1000/sja1000.c printk(KERN_INFO "%s: driver removed\n", DRV_NAME); printk 368 drivers/net/can/slcan.c printk(KERN_WARNING "%s: xmit: iface is down\n", dev->name); printk 728 drivers/net/can/slcan.c printk(KERN_ERR "slcan: can't register line discipline\n"); printk 777 drivers/net/can/slcan.c printk(KERN_ERR "%s: tty discipline still running\n", printk 789 drivers/net/can/slcan.c printk(KERN_ERR "slcan: can't unregister ldisc (err %d)\n", i); printk 509 drivers/net/ethernet/8390/etherh.c printk(KERN_ERR "%s: unable to read module description string\n", printk 528 drivers/net/ethernet/8390/etherh.c printk(KERN_ERR "%s: unable to parse MAC address: %s\n", printk 234 drivers/net/ethernet/8390/ne2k-pci.c printk(version); printk 730 drivers/net/ethernet/8390/ne2k-pci.c printk(version); printk 584 drivers/net/ethernet/8390/smc-ultra.c printk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n"); printk 596 drivers/net/ethernet/8390/smc-ultra.c printk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]); printk 530 drivers/net/ethernet/8390/wd.c printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n"); printk 544 drivers/net/ethernet/8390/wd.c printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]); printk 604 drivers/net/ethernet/adaptec/starfire.c printk("%s: Adding vlanid %d to vlan filter\n", dev->name, vid); printk 619 drivers/net/ethernet/adaptec/starfire.c printk("%s: removing vlanid %d from vlan filter\n", dev->name, vid); printk 661 drivers/net/ethernet/adaptec/starfire.c printk(version); printk 719 drivers/net/ethernet/adaptec/starfire.c printk("%2.2x%s", printk 738 drivers/net/ethernet/adaptec/starfire.c printk("%s: chipset reset never completed!\n", dev->name); printk 779 drivers/net/ethernet/adaptec/starfire.c printk("Adjusting small_frames down to 512\n"); printk 796 drivers/net/ethernet/adaptec/starfire.c printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", printk 811 drivers/net/ethernet/adaptec/starfire.c printk("%s: PHY#%d reset never completed!\n", dev->name, phy); printk 818 drivers/net/ethernet/adaptec/starfire.c printk(KERN_INFO "%s: MII PHY found at address %d, status " printk 832 drivers/net/ethernet/adaptec/starfire.c printk(KERN_INFO "%s: scatter-gather and hardware TCP cksumming %s.\n", printk 894 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", printk 960 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Filling in the station address.\n", dev->name); printk 994 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Setting the Rx and Tx modes.\n", dev->name); printk 1019 drivers/net/ethernet/adaptec/starfire.c printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", printk 1024 drivers/net/ethernet/adaptec/starfire.c printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", printk 1031 drivers/net/ethernet/adaptec/starfire.c printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", printk 1036 drivers/net/ethernet/adaptec/starfire.c printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", printk 1059 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Done netdev_open().\n", printk 1085 drivers/net/ethernet/adaptec/starfire.c printk("%s: MII reset failed!\n", dev->name); printk 1099 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n", printk 1114 drivers/net/ethernet/adaptec/starfire.c printk(KERN_WARNING "%s: Transmit timed out, status %#8.8x, " printk 1254 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Tx #%d/#%d slot %d status %#8.8x.\n", printk 1325 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Interrupt status %#8.8x.\n", printk 1347 drivers/net/ethernet/adaptec/starfire.c printk(KERN_INFO printk 1361 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Tx Consumer index is %d.\n", printk 1366 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Tx completion #%d entry %d is %#8.8x.\n", printk 1420 drivers/net/ethernet/adaptec/starfire.c printk(KERN_WARNING "%s: Too much work at interrupt, " printk 1428 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: exiting interrupt, status=%#8.8x.\n", printk 1452 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status); printk 1456 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status); printk 1473 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota); printk 1497 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n", printk 1506 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2)); printk 1524 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2)); printk 1531 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " netdev_rx() vlanid = %d\n", printk 1555 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " exiting netdev_rx(): %d, status of %d was %#8.8x.\n", printk 1584 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " exiting netdev_poll(): %d.\n", printk 1670 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n", printk 1694 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Link is down\n", dev->name); printk 1707 drivers/net/ethernet/adaptec/starfire.c printk(KERN_NOTICE "%s: PCI bus congestion, increasing Tx FIFO threshold to %d bytes\n", printk 1710 drivers/net/ethernet/adaptec/starfire.c printk(KERN_WARNING "%s: PCI Tx underflow -- adapter is probably malfunctioning\n", dev->name); printk 1721 drivers/net/ethernet/adaptec/starfire.c printk(KERN_ERR "%s: Something Wicked happened! %#8.8x.\n", printk 1945 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n", printk 1947 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", printk 1960 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG" Tx ring at %#llx:\n", printk 1963 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " #%d desc. %#8.8x %#llx -> %#8.8x.\n", printk 1967 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " Rx ring at %#llx -> %p:\n", printk 1971 drivers/net/ethernet/adaptec/starfire.c printk(KERN_DEBUG " #%d desc. %#llx -> %#8.8x\n", printk 2076 drivers/net/ethernet/adaptec/starfire.c printk(version); printk 2078 drivers/net/ethernet/adaptec/starfire.c printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n"); printk 483 drivers/net/ethernet/alteon/acenic.c printk(version); printk 499 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Enabling PCI Memory Mapped " printk 522 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unable to map I/O register, " printk 531 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Farallon PN9100-T ", printk 534 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Alteon AceNIC ", printk 539 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: 3Com 3C985 ", ap->name); printk 542 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: NetGear GA620 ", ap->name); printk 546 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Farallon PN9000-SX ", printk 552 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: SGI AceNIC ", ap->name); printk 555 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Unknown AceNIC ", ap->name); printk 559 drivers/net/ethernet/alteon/acenic.c printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr); printk 560 drivers/net/ethernet/alteon/acenic.c printk("irq %d\n", pdev->irq); printk 564 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Driver compiled without Tigon I" printk 586 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "acenic: device registration failed\n"); printk 917 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " Tigon I (Rev. %i), Firmware: %i.%i.%i, ", printk 926 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " Tigon II (Rev. %i), Firmware: %i.%i.%i, ", printk 942 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING " Unsupported Tigon version detected " printk 999 drivers/net/ethernet/alteon/acenic.c printk("MAC: %pM\n", dev->dev_addr); printk 1011 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " PCI cache line size set incorrectly " printk 1014 drivers/net/ethernet/alteon/acenic.c printk("expecting %i\n", SMP_CACHE_BYTES); printk 1016 drivers/net/ethernet/alteon/acenic.c printk("correcting to %i\n", SMP_CACHE_BYTES); printk 1023 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " PCI bus width: %i bits, speed: %iMHz, " printk 1051 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " Disabling PCI memory " printk 1055 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " PCI memory write & invalidate " printk 1072 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " Cache line size %i not " printk 1123 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO " Enabling PCI Fast Back to Back\n"); printk 1164 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: Requested IRQ %d is busy\n", printk 1342 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: more than %i NICs detected, " printk 1382 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Setting half duplex link\n", printk 1395 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: No media speed specified, " printk 1403 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Disabling flow control " printk 1408 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Enabling TX flow control\n", printk 1458 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Firmware NOT running!\n", ap->name); printk 1490 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Someone is busy refilling the RX ring\n", printk 1496 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Someone is busy refilling " printk 1557 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: Transmitter is stuck, %08x\n", printk 1561 drivers/net/ethernet/alteon/acenic.c printk(KERN_DEBUG "%s: BUG... transmitter died. Kicking it.\n", printk 1580 drivers/net/ethernet/alteon/acenic.c printk("refilling buffers (current %i)\n", cur_size); printk 1590 drivers/net/ethernet/alteon/acenic.c printk("refilling mini buffers (current %i)\n", printk 1601 drivers/net/ethernet/alteon/acenic.c printk("refilling jumbo buffers (current %i)\n", cur_size); printk 1686 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "Out of memory when allocating " printk 1739 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "Out of memory when allocating " printk 1803 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "Out of memory when allocating " printk 1823 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Firmware up and running\n", printk 1837 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: Optical link UP " printk 1846 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: Optical link DOWN\n", printk 1850 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: 10/100BaseT link " printk 1854 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unknown optical link " printk 1862 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: invalid command error\n", printk 1866 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: unimplemented command " printk 1870 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: bad config error\n", printk 1874 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: unknown error %02x\n", printk 1903 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Jumbo ring flushed\n", printk 1909 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unhandled event 0x%02x\n", printk 1972 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: unknown frame type (0x%02x) " printk 2178 drivers/net/ethernet/alteon/acenic.c printk("low on std buffers %i\n", cur_size); printk 2193 drivers/net/ethernet/alteon/acenic.c printk("low on mini buffers %i\n", printk 2210 drivers/net/ethernet/alteon/acenic.c printk("low on jumbo buffers %i\n", printk 2235 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: Firmware not running!\n", dev->name); printk 2539 drivers/net/ethernet/alteon/acenic.c printk(KERN_WARNING "%s: Transmit ring stuck full\n", dev->name); printk 2554 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Enabling Jumbo frame " printk 2679 drivers/net/ethernet/alteon/acenic.c printk(KERN_INFO "%s: Renegotiating link state\n", printk 2880 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: trying to download firmware while the " printk 2890 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", printk 2908 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: bogus load address %08x in \"%s\"\n", printk 2916 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: bogus load address %08x in \"%s\"\n", printk 3098 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unable to sync eeprom\n", ap->name); printk 3106 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unable to set address byte 0\n", printk 3115 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unable to set address byte 1\n", printk 3125 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unable to set READ_SELECT\n", printk 3182 drivers/net/ethernet/alteon/acenic.c printk(KERN_ERR "%s: Unable to read eeprom byte 0x%02lx\n", printk 729 drivers/net/ethernet/alteon/acenic.h printk(KERN_ERR "AceNIC RACE ALERT! writing identical value " printk 99 drivers/net/ethernet/amd/7990.c printk("R%d: @(%02X %04X) len %04X, mblen %04X, bits %02X\n", \ printk 105 drivers/net/ethernet/amd/7990.c printk("T%d: @(%02X %04X) len %04X, misc %04X, bits %02X\n", \ printk 175 drivers/net/ethernet/amd/7990.c printk("TX rings:\n"); printk 187 drivers/net/ethernet/amd/7990.c printk("%d: 0x%8.8x\n", i, leptr); printk 192 drivers/net/ethernet/amd/7990.c printk("RX rings:\n"); printk 203 drivers/net/ethernet/amd/7990.c printk("%d: 0x%8.8x\n", i, leptr); printk 213 drivers/net/ethernet/amd/7990.c printk("RX ptr: %8.8x\n", leptr); printk 220 drivers/net/ethernet/amd/7990.c printk("TX ptr: %8.8x\n", leptr); printk 242 drivers/net/ethernet/amd/7990.c printk("LANCE unopened after %d ticks, csr0=%4.4x.\n", i, READRDP(lp)); printk 267 drivers/net/ethernet/amd/7990.c printk("Lance restart=%d\n", status); printk 283 drivers/net/ethernet/amd/7990.c printk("["); printk 286 drivers/net/ethernet/amd/7990.c printk("%s", printk 289 drivers/net/ethernet/amd/7990.c printk("%s", printk 292 drivers/net/ethernet/amd/7990.c printk("]"); printk 388 drivers/net/ethernet/amd/7990.c printk("%s: Carrier Lost, trying %s\n", printk 406 drivers/net/ethernet/amd/7990.c printk("%s: Tx: ERR_BUF|ERR_UFL, restarting\n", printk 479 drivers/net/ethernet/amd/7990.c printk("%s: Bus master arbitration failure, status %4.4x.\n", printk 532 drivers/net/ethernet/amd/7990.c printk("lance_tx_timeout\n"); printk 563 drivers/net/ethernet/amd/7990.c printk("\n"); printk 564 drivers/net/ethernet/amd/7990.c printk("%2.2x ", skb->data[i]); printk 182 drivers/net/ethernet/amd/am79c961a.c printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i); printk 186 drivers/net/ethernet/amd/am79c961a.c printk ("%05X\n", i); printk 191 drivers/net/ethernet/amd/am79c961a.c printk ("10000\n"); printk 316 drivers/net/ethernet/amd/am79c961a.c printk("%s: link up\n", dev->name); printk 319 drivers/net/ethernet/amd/am79c961a.c printk("%s: link down\n", dev->name); printk 427 drivers/net/ethernet/amd/am79c961a.c printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n", printk 654 drivers/net/ethernet/amd/am79c961a.c printk(KERN_INFO "%s", version); printk 738 drivers/net/ethernet/amd/am79c961a.c printk(KERN_INFO "%s: ether address %pM\n", printk 90 drivers/net/ethernet/amd/atarilance.c printk a; \ printk 94 drivers/net/ethernet/amd/atarilance.c # define PROBE_PRINT(a) printk a printk 558 drivers/net/ethernet/amd/atarilance.c printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 ); printk 567 drivers/net/ethernet/amd/atarilance.c printk( "Lance: request for VME interrupt failed\n" ); printk 572 drivers/net/ethernet/amd/atarilance.c printk( "Lance: request for irq %u failed\n", irq ); printk 578 drivers/net/ethernet/amd/atarilance.c printk("%s: %s at io %#lx, mem %#lx, irq %d%s, hwaddr ", printk 603 drivers/net/ethernet/amd/atarilance.c printk("%pM\n", dev->dev_addr); printk 605 drivers/net/ethernet/amd/atarilance.c printk( "%s: Warning: This is a default ethernet address!\n", printk 607 drivers/net/ethernet/amd/atarilance.c printk( " Use \"ifconfig hw ether ...\" to set the address.\n" ); printk 803 drivers/net/ethernet/amd/atarilance.c printk( "%s: TX pkt type 0x%04x from %pM to %pM" printk 994 drivers/net/ethernet/amd/atarilance.c printk( "%s: Runt packet!\n", dev->name ); printk 1016 drivers/net/ethernet/amd/atarilance.c printk(KERN_DEBUG "%s: RX pkt type 0x%04x from %pM to %pM " printk 479 drivers/net/ethernet/amd/declance.c printk("RX ptr: %8.8x(%8.8x)\n", printk 488 drivers/net/ethernet/amd/declance.c printk("TX ptr: %8.8x(%8.8x)\n", printk 492 drivers/net/ethernet/amd/declance.c printk("TX rings:\n"); printk 504 drivers/net/ethernet/amd/declance.c printk("%d: %8.8x(%p)\n", printk 510 drivers/net/ethernet/amd/declance.c printk("RX rings:\n"); printk 521 drivers/net/ethernet/amd/declance.c printk("%d: %8.8x(%p)\n", printk 540 drivers/net/ethernet/amd/declance.c printk("LANCE unopened after %d ticks, csr0=%4.4x.\n", printk 545 drivers/net/ethernet/amd/declance.c printk("LANCE unopened after %d ticks, csr0=%4.4x.\n", printk 569 drivers/net/ethernet/amd/declance.c printk("["); printk 572 drivers/net/ethernet/amd/declance.c printk("%s", *lib_ptr(ib, brx_ring[i].rmd1, printk 576 drivers/net/ethernet/amd/declance.c printk("%s", *lib_ptr(ib, brx_ring[i].rmd1, printk 580 drivers/net/ethernet/amd/declance.c printk("]"); printk 673 drivers/net/ethernet/amd/declance.c printk("%s: Carrier Lost\n", dev->name); printk 688 drivers/net/ethernet/amd/declance.c printk("%s: Tx: ERR_BUF|ERR_UFL, restarting\n", printk 730 drivers/net/ethernet/amd/declance.c printk(KERN_ERR "%s: DMA error\n", dev->name); printk 765 drivers/net/ethernet/amd/declance.c printk("%s: Memory error, status %04x\n", dev->name, csr0); printk 810 drivers/net/ethernet/amd/declance.c printk("%s: Can't get IRQ %d\n", dev->name, dev->irq); printk 819 drivers/net/ethernet/amd/declance.c printk("%s: Can't get DMA IRQ %d\n", dev->name, printk 892 drivers/net/ethernet/amd/declance.c printk(KERN_ERR "%s: transmit timed out, status %04x, reset\n", printk 1038 drivers/net/ethernet/amd/declance.c printk(version); printk 1118 drivers/net/ethernet/amd/declance.c printk(KERN_ERR printk 1184 drivers/net/ethernet/amd/declance.c printk(KERN_ERR "%s: declance_init called with unknown type\n", printk 1197 drivers/net/ethernet/amd/declance.c printk(KERN_ERR printk 1208 drivers/net/ethernet/amd/declance.c printk(KERN_ERR "%s: Something is wrong with the " printk 1233 drivers/net/ethernet/amd/declance.c printk("%s: %s, addr = %pM, irq = %d\n", printk 1260 drivers/net/ethernet/amd/declance.c printk(KERN_ERR printk 1270 drivers/net/ethernet/amd/declance.c printk("%s: registered as %s.\n", name, dev->name); printk 105 drivers/net/ethernet/amd/hplance.c printk(KERN_INFO "%s: %s; select code %d, addr %pM, irq %d\n", printk 339 drivers/net/ethernet/amd/lance.c printk(KERN_NOTICE "lance.c: Module autoprobing not allowed. Append \"io=0xNNN\" value(s).\n"); printk 524 drivers/net/ethernet/amd/lance.c printk(" LANCE chip version is %#x.\n", chip_version); printk 537 drivers/net/ethernet/amd/lance.c printk("%s: %s at %#3x, ", dev->name, chipname, ioaddr); printk 543 drivers/net/ethernet/amd/lance.c printk("%pM", dev->dev_addr); printk 551 drivers/net/ethernet/amd/lance.c if (lance_debug > 6) printk(" (#0x%05lx)", (unsigned long)lp); printk 595 drivers/net/ethernet/amd/lance.c printk(" HP Vectra IRQ %d DMA %d.\n", dev->irq, dev->dma); printk 602 drivers/net/ethernet/amd/lance.c printk(" HP J2405A IRQ %d DMA %d.\n", dev->irq, dev->dma); printk 623 drivers/net/ethernet/amd/lance.c printk(" assigned IRQ %d", dev->irq); printk 638 drivers/net/ethernet/amd/lance.c printk(", probed IRQ %d", dev->irq); printk 640 drivers/net/ethernet/amd/lance.c printk(", failed to detect IRQ line.\n"); printk 651 drivers/net/ethernet/amd/lance.c printk(", no DMA needed.\n"); printk 654 drivers/net/ethernet/amd/lance.c printk("DMA %d allocation failed.\n", dev->dma); printk 657 drivers/net/ethernet/amd/lance.c printk(", assigned DMA %d.\n", dev->dma); printk 684 drivers/net/ethernet/amd/lance.c printk(", DMA %d.\n", dev->dma); printk 694 drivers/net/ethernet/amd/lance.c printk("DMA detection failed.\n"); printk 710 drivers/net/ethernet/amd/lance.c printk(" Failed to detect the 7990 IRQ line.\n"); printk 713 drivers/net/ethernet/amd/lance.c printk(" Auto-IRQ detected IRQ%d.\n", dev->irq); printk 725 drivers/net/ethernet/amd/lance.c printk(version); printk 786 drivers/net/ethernet/amd/lance.c printk("%s: lance_open() irq %d dma %d tx/rx rings %#x/%#x init %#x.\n", printk 818 drivers/net/ethernet/amd/lance.c printk("%s: LANCE open after %d ticks, init block %#x csr0 %4.4x.\n", printk 922 drivers/net/ethernet/amd/lance.c printk ("%s: transmit timed out, status %4.4x, resetting.\n", printk 929 drivers/net/ethernet/amd/lance.c printk (" Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", printk 933 drivers/net/ethernet/amd/lance.c printk ("%s %08x %04x %04x", i & 0x3 ? "" : "\n ", printk 937 drivers/net/ethernet/amd/lance.c printk ("%s %08x %04x %04x", i & 0x3 ? "" : "\n ", printk 940 drivers/net/ethernet/amd/lance.c printk ("\n"); printk 962 drivers/net/ethernet/amd/lance.c printk("%s: lance_start_xmit() called, csr0 %4.4x.\n", dev->name, printk 995 drivers/net/ethernet/amd/lance.c printk("%s: bouncing a high-memory packet (%#x).\n", printk 1041 drivers/net/ethernet/amd/lance.c printk("%s: interrupt csr0=%#2.2x new csr=%#2.2x.\n", printk 1073 drivers/net/ethernet/amd/lance.c printk("%s: Tx FIFO error! Status %4.4x.\n", printk 1095 drivers/net/ethernet/amd/lance.c printk("out-of-sync dirty pointer, %d vs. %d, full=%s.\n", printk 1116 drivers/net/ethernet/amd/lance.c printk("%s: Bus master arbitration failure, status %4.4x.\n", printk 1135 drivers/net/ethernet/amd/lance.c printk("%s: exiting interrupt, csr%d=%#4.4x.\n", printk 1179 drivers/net/ethernet/amd/lance.c printk("%s: Runt packet!\n",dev->name); printk 1187 drivers/net/ethernet/amd/lance.c printk("%s: Memory squeeze, deferring packet.\n", dev->name); printk 1239 drivers/net/ethernet/amd/lance.c printk("%s: Shutting down ethercard, status was %2.2x.\n", printk 109 drivers/net/ethernet/amd/mvme147.c printk("%s: MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n", printk 116 drivers/net/ethernet/amd/mvme147.c printk("%s: No memory for LANCE buffers\n", dev->name); printk 300 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: unable to get IRQ %d (irqval=%d).\n", printk 458 drivers/net/ethernet/amd/ni65.c printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cards[p->cardno].cardname , ioaddr); printk 462 drivers/net/ethernet/amd/ni65.c printk("failed.\n"); printk 463 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Can't RESET card: %04x\n", dev->name, j); printk 476 drivers/net/ethernet/amd/ni65.c printk("Version %#08lx, ",v); printk 480 drivers/net/ethernet/amd/ni65.c printk("ancient LANCE, "); printk 487 drivers/net/ethernet/amd/ni65.c printk("IRQ %d (from card), DMA %d (from card).\n",dev->irq,dev->dma); printk 517 drivers/net/ethernet/amd/ni65.c printk("failed.\n"); printk 518 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Can't detect DMA channel!\n", dev->name); printk 524 drivers/net/ethernet/amd/ni65.c printk("DMA %d (autodetected), ",dev->dma); printk 527 drivers/net/ethernet/amd/ni65.c printk("DMA %d (assigned), ",dev->dma); printk 540 drivers/net/ethernet/amd/ni65.c printk("Failed to detect IRQ line!\n"); printk 545 drivers/net/ethernet/amd/ni65.c printk("IRQ %d (autodetected).\n",dev->irq); printk 548 drivers/net/ethernet/amd/ni65.c printk("IRQ %d (assigned).\n",dev->irq); printk 553 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Can't request dma-channel %d\n",dev->name,(int) dev->dma); printk 612 drivers/net/ethernet/amd/ni65.c printk(KERN_WARNING "%s: unable to allocate %s memory.\n",dev->name,what); printk 625 drivers/net/ethernet/amd/ni65.c printk(KERN_WARNING "%s: unable to allocate %s memory in lower 16MB!\n",dev->name,what); printk 726 drivers/net/ethernet/amd/ni65.c printk(KERN_DEBUG "ni65_stop_start\n"); printk 807 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: can't RESET %s card: %04x\n",dev->name, printk 861 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: can't init lance, status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG)); printk 902 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: general error: %04x.\n",dev->name,csr0); printk 908 drivers/net/ethernet/amd/ni65.c printk("%02x ",p->rmdhead[i].u.s.status); printk 909 drivers/net/ethernet/amd/ni65.c printk("\n"); printk 914 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Ooops .. memory error: %04x.\n",dev->name,csr0); printk 951 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Ooops, receive ring corrupted %2d %2d | %s\n",dev->name,p->rmdnum,i,buf); printk 966 drivers/net/ethernet/amd/ni65.c printk(KERN_DEBUG "%s: RX or TX was offline -> restart\n",dev->name); printk 996 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: tdr-problems (e.g. no resistor)\n",dev->name); printk 1007 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Xmit FIFO/BUFF error\n",dev->name); printk 1017 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: xmit-error: %04x %02x-%04x\n",dev->name,csr0,(int) tmdstat,(int) tmdp->status2); printk 1061 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: recv, packet too long: %d\n",dev->name,rmdp->mlen & 0x0fff); printk 1066 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: receive-error: %04x, lance-status: %04x/%04x\n", printk 1116 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: can't alloc new sk_buff\n",dev->name); printk 1121 drivers/net/ethernet/amd/ni65.c printk(KERN_INFO "%s: received runt packet\n",dev->name); printk 1141 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: xmitter timed out, try to restart!\n",dev->name); printk 1143 drivers/net/ethernet/amd/ni65.c printk("%02x ",p->tmdhead[i].u.s.status); printk 1144 drivers/net/ethernet/amd/ni65.c printk("\n"); printk 1162 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Queue was locked.\n", dev->name); printk 1219 drivers/net/ethernet/amd/ni65.c printk(KERN_ERR "%s: Can't switch card into MC mode!\n",dev->name); printk 1343 drivers/net/ethernet/amd/nmclan_cs.c printk(KERN_DEBUG " adr =%pM\n", adr); printk 1344 drivers/net/ethernet/amd/nmclan_cs.c printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); printk 1691 drivers/net/ethernet/amd/pcnet32.c printk(KERN_DEBUG PFX "media set to %sMbit mode\n", printk 2472 drivers/net/ethernet/amd/pcnet32.c printk(KERN_DEBUG printk 2477 drivers/net/ethernet/amd/pcnet32.c printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", printk 2483 drivers/net/ethernet/amd/pcnet32.c printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", printk 2488 drivers/net/ethernet/amd/pcnet32.c printk("\n"); printk 82 drivers/net/ethernet/amd/sun3lance.c printk a; \ printk 353 drivers/net/ethernet/amd/sun3lance.c printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n"); printk 367 drivers/net/ethernet/amd/sun3lance.c printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n"); printk 373 drivers/net/ethernet/amd/sun3lance.c printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ", printk 391 drivers/net/ethernet/amd/sun3lance.c printk("%pM\n", dev->dev_addr); printk 408 drivers/net/ethernet/amd/sun3lance.c printk( version ); printk 544 drivers/net/ethernet/amd/sun3lance.c printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n", printk 549 drivers/net/ethernet/amd/sun3lance.c printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n", printk 554 drivers/net/ethernet/amd/sun3lance.c printk("tx #%d: base=%04x len=%04x misc=%04x\n", printk 578 drivers/net/ethernet/amd/sun3lance.c printk( "%s: tx queue lock!.\n", dev->name); printk 600 drivers/net/ethernet/amd/sun3lance.c printk( "%s: TX pkt %d type 0x%04x" printk 717 drivers/net/ethernet/amd/sun3lance.c printk("%s: Tx FIFO error\n", printk 811 drivers/net/ethernet/amd/sun3lance.c printk( "%s: Runt packet!\n", dev->name ); printk 827 drivers/net/ethernet/amd/sun3lance.c printk("%s: RX pkt %d type 0x%04x" printk 832 drivers/net/ethernet/amd/sun3lance.c printk(" data %02x %02x %02x %02x %02x %02x %02x %02x " printk 841 drivers/net/ethernet/amd/sun3lance.c printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len); printk 487 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "LANCE unopened after %d ticks, csr0=%4.4x.\n", printk 490 drivers/net/ethernet/amd/sunlance.c printk("dcsr=%8.8x\n", sbus_readl(lp->dregs + DMA_CSR)); printk 595 drivers/net/ethernet/amd/sunlance.c printk(KERN_NOTICE "%s: Carrier Lost, trying %s\n", printk 611 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "%s: Tx: ERR_BUF|ERR_UFL, restarting\n", printk 763 drivers/net/ethernet/amd/sunlance.c printk(KERN_NOTICE "%s: Carrier Lost, trying %s\n", printk 779 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "%s: Tx: ERR_BUF|ERR_UFL, restarting\n", printk 851 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "%s: Memory error, status %04x, addr %06x\n", printk 854 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "%s: Memory error, status %04x\n", printk 923 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq); printk 990 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "resetting ledma\n"); printk 1104 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "%s: transmit timed out, status %04x, reset\n", printk 1320 drivers/net/ethernet/amd/sunlance.c printk (KERN_INFO "%s", version); printk 1335 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "SunLance: Cannot map registers.\n"); printk 1345 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "SunLance: Cannot map " printk 1356 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "SunLance: ERROR: Rx and Tx rings not on even boundary.\n"); printk 1363 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "SunLance: Cannot map PIO buffer.\n"); printk 1414 drivers/net/ethernet/amd/sunlance.c printk(KERN_INFO "SunLance: using " printk 1426 drivers/net/ethernet/amd/sunlance.c printk(KERN_NOTICE "SunLance: warning: overriding option " printk 1428 drivers/net/ethernet/amd/sunlance.c printk(KERN_NOTICE "SunLance: warning: mail any problems " printk 1469 drivers/net/ethernet/amd/sunlance.c printk(KERN_ERR "SunLance: Cannot register device.\n"); printk 1475 drivers/net/ethernet/amd/sunlance.c printk(KERN_INFO "%s: LANCE %pM\n", printk 424 drivers/net/ethernet/apple/bmac.c printk(KERN_DEBUG "phy registers:"); printk 427 drivers/net/ethernet/apple/bmac.c printk(KERN_DEBUG); printk 428 drivers/net/ethernet/apple/bmac.c printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr)); printk 430 drivers/net/ethernet/apple/bmac.c printk(KERN_CONT "\n"); printk 1247 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: can't use, need 3 addrs and 3 intrs\n"); printk 1256 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: Can't get mac-address\n"); printk 1274 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: can't request IO resource !\n"); printk 1323 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: can't get irq %d\n", dev->irq); printk 1328 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: can't get irq %d\n", bp->tx_dma_intr); printk 1333 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: can't get irq %d\n", bp->rx_dma_intr); printk 1344 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "BMAC: Ethernet registration failed\n"); printk 1348 drivers/net/ethernet/apple/bmac.c printk(KERN_INFO "%s: BMAC%s at %pM", printk 1351 drivers/net/ethernet/apple/bmac.c printk("\n"); printk 1498 drivers/net/ethernet/apple/bmac.c printk(KERN_ERR "bmac: transmit timeout - resetting\n"); printk 1548 drivers/net/ethernet/apple/bmac.c printk("dbdma req 0x%x addr 0x%x baddr 0x%x xfer/res 0x%x\n", printk 118 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "can't use MACE %pOF: need 3 addrs and 3 irqs\n", printk 127 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "Can't get mac-address for MACE %pOF\n", printk 144 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't request IO resources !\n"); printk 162 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't map IO resources !\n"); printk 181 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't map TX DMA resources !\n"); printk 189 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't map RX DMA resources !\n"); printk 228 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq); printk 233 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr); printk 238 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr); printk 244 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "MACE: Cannot register net device, aborting.\n"); printk 248 drivers/net/ethernet/apple/mace.c printk(KERN_INFO "%s: MACE at %pM, chip revision %d.%d\n", printk 334 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "mace: cannot reset chip!\n"); printk 554 drivers/net/ethernet/apple/mace.c printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len); printk 613 drivers/net/ethernet/apple/mace.c printk("Multicast filter :"); printk 615 drivers/net/ethernet/apple/mace.c printk("%02x ", multicast_filter[i]); printk 616 drivers/net/ethernet/apple/mace.c printk("\n"); printk 651 drivers/net/ethernet/apple/mace.c printk(KERN_DEBUG "mace: babbling transmitter\n"); printk 654 drivers/net/ethernet/apple/mace.c printk(KERN_DEBUG "mace: jabbering transceiver\n"); printk 716 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n", printk 753 drivers/net/ethernet/apple/mace.c printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n", printk 826 drivers/net/ethernet/apple/mace.c printk(KERN_ERR "mace: transmit timeout - resetting\n"); printk 898 drivers/net/ethernet/apple/mace.c printk(KERN_DEBUG "mace: lost a status word\n"); printk 278 drivers/net/ethernet/apple/macmace.c printk(KERN_ERR "macmace: cannot reset chip!\n"); printk 373 drivers/net/ethernet/apple/macmace.c printk(KERN_ERR "%s: can't get irq %d\n", dev->name, dev->irq); printk 377 drivers/net/ethernet/apple/macmace.c printk(KERN_ERR "%s: can't get irq %d\n", dev->name, mp->dma_intr); printk 453 drivers/net/ethernet/apple/macmace.c printk(KERN_ERR "macmace: tx queue running but no free buffers.\n"); printk 546 drivers/net/ethernet/apple/macmace.c printk(KERN_DEBUG "macmace: babbling transmitter\n"); printk 549 drivers/net/ethernet/apple/macmace.c printk(KERN_DEBUG "macmace: jabbering transceiver\n"); printk 569 drivers/net/ethernet/apple/macmace.c printk(KERN_ERR "macmace: xmtfs not valid! (fs=%x)\n", fs); printk 578 drivers/net/ethernet/apple/macmace.c printk(KERN_DEBUG "macmace: tx ring ran out? (fs=%x)\n", fs); printk 613 drivers/net/ethernet/apple/macmace.c printk(KERN_ERR "macmace: transmit timeout - resetting\n"); printk 496 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_WARNING printk 501 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_WARNING printk 505 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_WARNING printk 515 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_WARNING printk 566 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s: %s NIC Link is Down\n", printk 1204 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n", printk 1339 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n"); printk 1529 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_DEBUG printk 1634 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_ERR printk 1691 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s - version %s\n", atl2_driver_string, printk 1693 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s\n", atl2_copyright); printk 2652 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n"); printk 2913 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s Enabled\n", opt->name); printk 2916 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s Disabled\n", opt->name); printk 2922 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s set to %i\n", opt->name, *value); printk 2931 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "%s\n", ent->str); printk 2940 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_INFO "Invalid %s specified (%i) %s\n", printk 2961 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_NOTICE "Warning: no configuration for board #%i\n", printk 2963 drivers/net/ethernet/atheros/atlx/atl2.c printk(KERN_NOTICE "Using defaults for all values\n"); printk 815 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); printk 817 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c printk("%s", lvl); printk 834 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c printk("%s" "end of fw dump\n", lvl); printk 1132 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "dropped packet (1)\n"); printk 2234 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "%s: unable to register MDIO bus\n", printk 2242 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "%s.%d: unable to register netdev\n", printk 2288 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, printk 2335 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "%s: no PHY found\n", dev->name); printk 2342 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); printk 2435 drivers/net/ethernet/broadcom/sb1250-mac.c printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); printk 2542 drivers/net/ethernet/broadcom/sb1250-mac.c printk(KERN_ERR "%s: unable to map device registers\n", printk 804 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c printk("%s: passive open TID %u too large\n", printk 872 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c printk("do_abort_req_rss: couldn't get skb!\n"); printk 898 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c printk("%s: active establish TID %u too large\n", printk 854 drivers/net/ethernet/cirrus/ep93xx_eth.c printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, %pM\n", printk 1698 drivers/net/ethernet/davicom/dm9000.c printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %pM (%s)\n", printk 1133 drivers/net/ethernet/dec/tulip/de4x5.c printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase); printk 1136 drivers/net/ethernet/dec/tulip/de4x5.c printk(", h/w address %pM\n", dev->dev_addr); printk 1139 drivers/net/ethernet/dec/tulip/de4x5.c printk(" which has an Ethernet PROM CRC error.\n"); printk 1261 drivers/net/ethernet/dec/tulip/de4x5.c printk(" and requires IRQ%d (provided by %s).\n", dev->irq, printk 1266 drivers/net/ethernet/dec/tulip/de4x5.c printk(version); printk 1319 drivers/net/ethernet/dec/tulip/de4x5.c printk("de4x5_open(): Requested IRQ%d is busy - attempting FAST/SHARE...", dev->irq); printk 1322 drivers/net/ethernet/dec/tulip/de4x5.c printk("\n Cannot get IRQ- reconfigure your hardware.\n"); printk 1330 drivers/net/ethernet/dec/tulip/de4x5.c printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n"); printk 1331 drivers/net/ethernet/dec/tulip/de4x5.c printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n"); printk 1343 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tsts: 0x%08x\n", inl(DE4X5_STS)); printk 1344 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR)); printk 1345 drivers/net/ethernet/dec/tulip/de4x5.c printk("\timr: 0x%08x\n", inl(DE4X5_IMR)); printk 1346 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tomr: 0x%08x\n", inl(DE4X5_OMR)); printk 1347 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR)); printk 1348 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR)); printk 1349 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR)); printk 1350 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR)); printk 1442 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Setup frame timed out, status %08x\n", dev->name, printk 1488 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO"); printk 1551 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Re-entering the interrupt handler.\n", dev->name); printk 1578 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n", printk 1641 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Insufficient memory; nuking packet.\n", printk 1824 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Shutting down ethercard, status was %8.8x.\n", printk 3172 drivers/net/ethernet/dec/tulip/de4x5.c printk("Huh?: media:%02x\n", lp->media); printk 3255 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Bad media code [%d] detected in SROM!\n", dev->name, printk 4307 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Cannot find correct chipset for SROM decoding!\n", printk 4324 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n", printk 5009 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name); printk 5014 drivers/net/ethernet/dec/tulip/de4x5.c printk("\n"); printk 5227 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq); printk 5228 drivers/net/ethernet/dec/tulip/de4x5.c printk("\tphysical address: %pM\n", dev->dev_addr); printk 5229 drivers/net/ethernet/dec/tulip/de4x5.c printk("Descriptor head addresses:\n"); printk 5230 drivers/net/ethernet/dec/tulip/de4x5.c printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring); printk 5231 drivers/net/ethernet/dec/tulip/de4x5.c printk("Descriptor addresses:\nRX: "); printk 5234 drivers/net/ethernet/dec/tulip/de4x5.c printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status); printk 5237 drivers/net/ethernet/dec/tulip/de4x5.c printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status); printk 5238 drivers/net/ethernet/dec/tulip/de4x5.c printk("TX: "); printk 5241 drivers/net/ethernet/dec/tulip/de4x5.c printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status); printk 5244 drivers/net/ethernet/dec/tulip/de4x5.c printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status); printk 5245 drivers/net/ethernet/dec/tulip/de4x5.c printk("Descriptor buffers:\nRX: "); printk 5248 drivers/net/ethernet/dec/tulip/de4x5.c printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf)); printk 5251 drivers/net/ethernet/dec/tulip/de4x5.c printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf)); printk 5252 drivers/net/ethernet/dec/tulip/de4x5.c printk("TX: "); printk 5255 drivers/net/ethernet/dec/tulip/de4x5.c printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf)); printk 5258 drivers/net/ethernet/dec/tulip/de4x5.c printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf)); printk 5259 drivers/net/ethernet/dec/tulip/de4x5.c printk("Ring size:\nRX: %d\nTX: %d\n", printk 5272 drivers/net/ethernet/dec/tulip/de4x5.c printk("\nMII device address: %d\n", lp->phy[k].addr); printk 5273 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII)); printk 5274 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII)); printk 5275 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII)); printk 5276 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII)); printk 5278 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII)); printk 5279 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII)); printk 5281 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII)); printk 5283 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII)); printk 5284 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII)); printk 5286 drivers/net/ethernet/dec/tulip/de4x5.c printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII)); printk 5298 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: media is %s%s\n", dev->name, printk 5321 drivers/net/ethernet/dec/tulip/de4x5.c printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id)); printk 5322 drivers/net/ethernet/dec/tulip/de4x5.c printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id)); printk 5323 drivers/net/ethernet/dec/tulip/de4x5.c printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc)); printk 5324 drivers/net/ethernet/dec/tulip/de4x5.c printk("SROM version: %02x\n", (u_char)(p->version)); printk 5325 drivers/net/ethernet/dec/tulip/de4x5.c printk("# controllers: %02x\n", (u_char)(p->num_controllers)); printk 5327 drivers/net/ethernet/dec/tulip/de4x5.c printk("Hardware Address: %pM\n", p->ieee_addr); printk 5328 drivers/net/ethernet/dec/tulip/de4x5.c printk("CRC checksum: %04x\n", (u_short)(p->chksum)); printk 5330 drivers/net/ethernet/dec/tulip/de4x5.c printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i)); printk 5341 drivers/net/ethernet/dec/tulip/de4x5.c printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n", printk 5347 drivers/net/ethernet/dec/tulip/de4x5.c printk(" %03x: ",j); printk 5349 drivers/net/ethernet/dec/tulip/de4x5.c printk("%02x ",(u_char)skb->data[i+j]); printk 5351 drivers/net/ethernet/dec/tulip/de4x5.c printk("\n"); printk 5405 drivers/net/ethernet/dec/tulip/de4x5.c printk("%s: Boo!\n", dev->name); printk 769 drivers/net/ethernet/dec/tulip/dmfe.c printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", printk 581 drivers/net/ethernet/dec/tulip/tulip_core.c printk(KERN_DEBUG printk 594 drivers/net/ethernet/dec/tulip/tulip_core.c printk(KERN_DEBUG " Rx ring %p: ", tp->rx_ring); printk 597 drivers/net/ethernet/dec/tulip/tulip_core.c printk(KERN_DEBUG " Tx ring %p: ", tp->tx_ring); printk 935 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); printk 937 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status); printk 938 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_CONT "\n"); printk 939 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); printk 941 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_CONT " %08x", np->tx_ring[i].status); printk 942 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_CONT "\n"); printk 944 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n", printk 946 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C)); printk 1509 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG" Tx ring at %p:\n", np->tx_ring); printk 1511 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", printk 1514 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); printk 1516 drivers/net/ethernet/dec/tulip/winbond-840.c printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", printk 1653 drivers/net/ethernet/dec/tulip/winbond-840.c printk(version); printk 121 drivers/net/ethernet/dlink/dl2k.c printk ("%s", version); printk 276 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "%s: %s, %pM, IRQ %d\n", printk 279 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "tx_coalesce:\t%d packets\n", printk 282 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO printk 287 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); printk 324 drivers/net/ethernet/dlink/dl2k.c printk (KERN_ERR "%s: No MII PHY found!\n", dev->name); printk 350 drivers/net/ethernet/dlink/dl2k.c printk (KERN_ERR "%s: EEPROM data CRC error.\n", printk 376 drivers/net/ethernet/dlink/dl2k.c printk (KERN_ERR "Cell data error\n"); printk 666 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Try to recover rx ring exhausted...\n"); printk 677 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO printk 704 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n", printk 876 drivers/net/ethernet/dlink/dl2k.c printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n", printk 1004 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO printk 1036 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "%s: Link up\n", dev->name); printk 1056 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "%s: Link off\n", dev->name); printk 1070 drivers/net/ethernet/dlink/dl2k.c printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n", printk 1317 drivers/net/ethernet/dlink/dl2k.c printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n"); printk 1524 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); printk 1528 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n"); printk 1532 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 100 Mbps, Full duplex\n"); printk 1536 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 100 Mbps, Half duplex\n"); printk 1540 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 10 Mbps, Full duplex\n"); printk 1544 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 10 Mbps, Half duplex\n"); printk 1558 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Operating at 1000 Mbps, "); printk 1561 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Operating at 100 Mbps, "); printk 1564 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Operating at 10 Mbps, "); printk 1567 drivers/net/ethernet/dlink/dl2k.c printk (KERN_CONT "Full duplex\n"); printk 1569 drivers/net/ethernet/dlink/dl2k.c printk (KERN_CONT "Half duplex\n"); printk 1573 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Enable Tx Flow Control\n"); printk 1575 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Disable Tx Flow Control\n"); printk 1577 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Enable Rx Flow Control\n"); printk 1579 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Disable Rx Flow Control\n"); printk 1651 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Manual 100 Mbps, "); printk 1653 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Manual 10 Mbps, "); printk 1657 drivers/net/ethernet/dlink/dl2k.c printk (KERN_CONT "Full duplex\n"); printk 1659 drivers/net/ethernet/dlink/dl2k.c printk (KERN_CONT "Half duplex\n"); printk 1694 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); printk 1697 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Auto 1000 Mbps, half duplex\n"); printk 1710 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Operating at 1000 Mbps, "); printk 1712 drivers/net/ethernet/dlink/dl2k.c printk (KERN_CONT "Full duplex\n"); printk 1714 drivers/net/ethernet/dlink/dl2k.c printk (KERN_CONT "Half duplex\n"); printk 1718 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Enable Tx Flow Control\n"); printk 1720 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Disable Tx Flow Control\n"); printk 1722 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Enable Rx Flow Control\n"); printk 1724 drivers/net/ethernet/dlink/dl2k.c printk(KERN_INFO "Disable Rx Flow Control\n"); printk 1767 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Manual full duplex\n"); printk 1770 drivers/net/ethernet/dlink/dl2k.c printk (KERN_INFO "Manual half duplex\n"); printk 465 drivers/net/ethernet/dlink/sundance.c printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); printk 523 drivers/net/ethernet/dlink/sundance.c printk(version); printk 593 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", printk 619 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: MII PHY found at address %d, status " printk 627 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", printk 685 drivers/net/ethernet/dlink/sundance.c printk (KERN_INFO "Override speed=%d, %s duplex\n", printk 693 drivers/net/ethernet/dlink/sundance.c printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); printk 696 drivers/net/ethernet/dlink/sundance.c printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); printk 863 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: netdev_open() irq %d\n", dev->name, irq); printk 909 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x " printk 947 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " printk 962 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, " printk 981 drivers/net/ethernet/dlink/sundance.c printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x " printk 989 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i, printk 997 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n", printk 1000 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n", printk 1003 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx); printk 1004 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "cur_task=%d\n", np->cur_task); printk 1133 drivers/net/ethernet/dlink/sundance.c printk (KERN_DEBUG printk 1201 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", printk 1220 drivers/net/ethernet/dlink/sundance.c printk printk 1225 drivers/net/ethernet/dlink/sundance.c printk("%s: Transmit error status %4.4x.\n", printk 1325 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", printk 1352 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", printk 1357 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", printk 1369 drivers/net/ethernet/dlink/sundance.c printk(KERN_WARNING "%s: Oversized Ethernet frame," printk 1377 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" printk 1468 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: Link up\n", dev->name); printk 1474 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: Link changed: ", printk 1478 drivers/net/ethernet/dlink/sundance.c printk("100Mbps, full duplex\n"); printk 1481 drivers/net/ethernet/dlink/sundance.c printk("100Mbps, half duplex\n"); printk 1484 drivers/net/ethernet/dlink/sundance.c printk("10Mbps, full duplex\n"); printk 1487 drivers/net/ethernet/dlink/sundance.c printk("10Mbps, half duplex\n"); printk 1489 drivers/net/ethernet/dlink/sundance.c printk("\n"); printk 1495 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: Link changed: %dMbps ,", printk 1497 drivers/net/ethernet/dlink/sundance.c printk("%s duplex.\n", printk 1510 drivers/net/ethernet/dlink/sundance.c printk(KERN_INFO "%s: Link down\n", dev->name); printk 1518 drivers/net/ethernet/dlink/sundance.c printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", printk 1848 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x " printk 1852 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", printk 1882 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " Tx ring at %8.8x:\n", printk 1885 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", printk 1888 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " Rx ring %8.8x:\n", printk 1891 drivers/net/ethernet/dlink/sundance.c printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", printk 1987 drivers/net/ethernet/dlink/sundance.c printk(KERN_ERR "%s: Can't resume interface!\n", printk 2015 drivers/net/ethernet/dlink/sundance.c printk(version); printk 208 drivers/net/ethernet/dnet.c printk(KERN_WARNING printk 243 drivers/net/ethernet/dnet.c printk(KERN_INFO "%s: link up (%d/%s)\n", printk 247 drivers/net/ethernet/dnet.c printk(KERN_INFO "%s: link down\n", dev->name); printk 260 drivers/net/ethernet/dnet.c printk(KERN_ERR "%s: no PHY found\n", dev->name); printk 278 drivers/net/ethernet/dnet.c printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); printk 386 drivers/net/ethernet/dnet.c printk(KERN_ERR "%s packet receive error %x\n", printk 404 drivers/net/ethernet/dnet.c printk(KERN_NOTICE printk 449 drivers/net/ethernet/dnet.c printk(KERN_ERR "%s: RX fifo error %x, irq %x\n", __func__, printk 461 drivers/net/ethernet/dnet.c printk(KERN_ERR "%s: TX fifo error %x, irq %x\n", __func__, printk 497 drivers/net/ethernet/dnet.c printk(KERN_DEBUG PFX "data:"); printk 499 drivers/net/ethernet/dnet.c printk(" %02x", (unsigned int)skb->data[k]); printk 500 drivers/net/ethernet/dnet.c printk("\n"); printk 6258 drivers/net/ethernet/emulex/benet/be_main.c printk(KERN_WARNING DRV_NAME printk 502 drivers/net/ethernet/fealnx.c printk(version); printk 666 drivers/net/ethernet/fealnx.c printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", printk 702 drivers/net/ethernet/fealnx.c printk(KERN_ERR "fealnx: remove for unknown device\n"); printk 909 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name); printk 1091 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x " printk 1176 drivers/net/ethernet/fealnx.c printk(KERN_WARNING "%s: resetting tx and rx machinery\n", dev->name); printk 1201 drivers/net/ethernet/fealnx.c printk(KERN_WARNING printk 1206 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); printk 1208 drivers/net/ethernet/fealnx.c printk(KERN_CONT " %8.8x", printk 1210 drivers/net/ethernet/fealnx.c printk(KERN_CONT "\n"); printk 1211 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); printk 1213 drivers/net/ethernet/fealnx.c printk(KERN_CONT " %4.4x", np->tx_ring[i].status); printk 1214 drivers/net/ethernet/fealnx.c printk(KERN_CONT "\n"); printk 1448 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", dev->name, printk 1565 drivers/net/ethernet/fealnx.c printk(KERN_WARNING "%s: Too much work at interrupt, " printk 1594 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", printk 1620 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", rx_status); printk 1626 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG printk 1667 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG printk 1690 drivers/net/ethernet/fealnx.c printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" printk 1955 drivers/net/ethernet/fealnx.c printk(version); printk 52 drivers/net/ethernet/freescale/ucc_geth.c printk(level format "\n", ## arg) printk 174 drivers/net/ethernet/freescale/ucc_geth.c printk("0x%08x: %08x %08x %08x %08x\r\n", printk 180 drivers/net/ethernet/freescale/ucc_geth.c printk("0x%08x: ", (u32) i); printk 182 drivers/net/ethernet/freescale/ucc_geth.c printk("%08x ", *((u32 *) (i))); printk 184 drivers/net/ethernet/freescale/ucc_geth.c printk("%02x", *((i))); printk 186 drivers/net/ethernet/freescale/ucc_geth.c printk("\r\n"); printk 393 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: probe\n", dev->name); printk 449 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: probe1\n", dev->name); printk 462 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Shasta Chip detected. (This is a pre 802.12 chip)\n", dev->name); printk 464 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Rainier Chip detected. (This is a pre 802.12 chip)\n", dev->name); printk 466 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Lassen Chip detected.\n", dev->name); printk 468 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Warning: Unknown CASCADE chip (id=0x%.4x).\n", dev->name, chip); printk 475 drivers/net/ethernet/hp/hp100.c printk(KERN_WARNING "%s: bad ID checksum at base port 0x%x\n", printk 484 drivers/net/ethernet/hp/hp100.c printk(KERN_WARNING printk 528 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: original LSW = 0x%x\n", dev->name, printk 536 drivers/net/ethernet/hp/hp100.c printk("hp100: IO mapped mode forced.\n"); printk 541 drivers/net/ethernet/hp/hp100.c printk("hp100: Shared memory mode requested.\n"); printk 546 drivers/net/ethernet/hp/hp100.c printk("hp100: Busmaster mode requested.\n"); printk 557 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: IO_EN bit is set on card.\n", dev->name); printk 572 drivers/net/ethernet/hp/hp100.c printk("hp100: Busmaster mode enabled.\n"); printk 577 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name); printk 578 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Trying shared memory mode.\n", dev->name); printk 587 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: new LSW = 0x%x\n", dev->name, hp100_inw(OPTION_LSW)); printk 604 drivers/net/ethernet/hp/hp100.c printk("hp100: Can only use programmed i/o mode.\n"); printk 617 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: ioremap for 0x%x bytes high PCI memory at 0x%lx failed\n", dev->name, virt_memory_size, mem_ptr_phys); printk 621 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: remapped 0x%x bytes high PCI memory at 0x%lx to %p.\n", dev->name, virt_memory_size, mem_ptr_phys, mem_ptr_virt); printk 628 drivers/net/ethernet/hp/hp100.c printk("hp100: Failed to ioremap the PCI card memory. Will have to use i/o mapped mode.\n"); printk 639 drivers/net/ethernet/hp/hp100.c printk("hp100: Using (slow) programmed i/o mode.\n"); printk 716 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE); printk 734 drivers/net/ethernet/hp/hp100.c printk("hp100: at 0x%x, IRQ %d, ", ioaddr, dev->irq); printk 737 drivers/net/ethernet/hp/hp100.c printk("EISA"); printk 740 drivers/net/ethernet/hp/hp100.c printk("PCI"); printk 743 drivers/net/ethernet/hp/hp100.c printk("ISA"); printk 746 drivers/net/ethernet/hp/hp100.c printk(" bus, %dk SRAM (rx/tx %d%%).\n", lp->memory_size >> 10, lp->rx_ratio); printk 749 drivers/net/ethernet/hp/hp100.c printk("hp100: Memory area at 0x%lx-0x%lx", mem_ptr_phys, printk 752 drivers/net/ethernet/hp/hp100.c printk(" (virtual base %p)", mem_ptr_virt); printk 753 drivers/net/ethernet/hp/hp100.c printk(".\n"); printk 760 drivers/net/ethernet/hp/hp100.c printk("hp100: "); printk 762 drivers/net/ethernet/hp/hp100.c printk("Adapter is attached to "); printk 765 drivers/net/ethernet/hp/hp100.c printk("100Mb/s Voice Grade AnyLAN network.\n"); printk 768 drivers/net/ethernet/hp/hp100.c printk("10Mb/s network (10baseT).\n"); printk 771 drivers/net/ethernet/hp/hp100.c printk("10Mb/s network (coax).\n"); printk 774 drivers/net/ethernet/hp/hp100.c printk("Warning! Link down.\n"); printk 804 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: hwinit\n", dev->name); printk 899 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: mmuinit\n", dev->name); printk 904 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Not in reset when entering mmuinit. Fix me.\n", dev->name); printk 997 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: PDL_STOP = 0x%x\n", dev->name, pdl_stop); printk 1008 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: TX_STOP = 0x%x\n", dev->name, xmit_stop >> 4); printk 1009 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: RX_STOP = 0x%x\n", dev->name, recv_stop >> 4); printk 1016 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: TX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(TX_MEM_STOP)); printk 1017 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: RX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(RX_MEM_STOP)); printk 1079 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: open\n", dev->name); printk 1087 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq); printk 1116 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: close\n", dev->name); printk 1132 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: close LSW = 0x%x\n", dev->name, printk 1156 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: init pdls\n", dev->name); printk 1160 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name); printk 1200 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Init rxpdl: Unaligned pdlptr 0x%lx.\n", printk 1227 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%lx.\n", dev->name, (unsigned long) pdlptr); printk 1255 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: build rx pdl\n", dev->name); printk 1282 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n", printk 1297 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Adr 0x%.8x = 0x%.8x\n", dev->name, (u_int) p, (u_int) * p); printk 1307 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: build_rx_pdl: PDH@0x%x, No space for skb.\n", dev->name, (u_int) ringptr->pdl); printk 1334 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rxfill\n", dev->name); printk 1351 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rxfill: Hand to card: pdl #%d @0x%x phys:0x%x, buffer: 0x%x\n", printk 1375 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: bm shutdown\n", dev->name); printk 1424 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: BM shutdown error.\n", dev->name); printk 1456 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: no connection found - check wire\n", dev->name); printk 1483 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit_bm\n", dev->name); printk 1495 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name); printk 1506 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name); printk 1517 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: link down detected\n", dev->name); printk 1520 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name); printk 1527 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: interface reset\n", dev->name); printk 1596 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: clean txring\n", dev->name); printk 1604 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Warning: More PDLs transmitted than committed to card???\n", dev->name); printk 1609 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Free skb: data @0x%.8x txrcommit=0x%x TXPDL=0x%x, done=0x%x\n", printk 1634 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit\n", dev->name); printk 1646 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i); printk 1651 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: trans_start timing problem\n", printk 1658 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name); printk 1669 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: link down detected\n", dev->name); printk 1672 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name); printk 1679 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: interface reset\n", dev->name); printk 1692 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit: busy\n", dev->name); printk 1703 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit: irq_status=0x%.4x, irqmask=0x%.4x, len=%d\n", printk 1736 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: start_xmit: end\n", dev->name); printk 1767 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx\n", dev->name); printk 1776 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx: waiting packets = %d\n", dev->name, packets); printk 1784 drivers/net/ethernet/hp/hp100.c printk ("hp100: %s: rx: busy, remaining packets = %d\n", dev->name, packets); printk 1798 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx: new packet - length=%d, errors=0x%x, dest=0x%x\n", printk 1807 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx: couldn't allocate a sk_buff of size %d\n", printk 1830 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", printk 1851 drivers/net/ethernet/hp/hp100.c printk("hp100_rx: %s: end\n", dev->name); printk 1868 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_bm\n", dev->name); printk 1873 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name); printk 1879 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: More packets received than committed? RX_PKT_CNT=0x%x, commit=0x%x\n", printk 1904 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n", printk 1907 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: RX_PDL_COUNT:0x%x TX_PDL_COUNT:0x%x, RX_PKT_CNT=0x%x PDH=0x%x, Data@0x%x len=0x%x\n", printk 1916 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_bm: skb null\n", dev->name); printk 1938 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_bm: Received bad packet (length=%d)\n", dev->name, pkt_len); printk 1951 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_bm: No space for new PDL.\n", dev->name); printk 1990 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: update-stats\n", dev->name); printk 2016 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: misc_interrupt\n", dev->name); printk 2030 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: clear_stats\n", dev->name); printk 2059 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: set_mc_list\n", dev->name); printk 2085 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: computing hash filter - mc_count = %i\n", printk 2091 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: multicast = %pM, ", printk 2096 drivers/net/ethernet/hp/hp100.c printk(":%02x:", idx); printk 2099 drivers/net/ethernet/hp/hp100.c printk("idx = %i\n", idx); printk 2125 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: mac1 = 0x%x, mac2 = 0x%x, multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", printk 2135 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name); printk 2150 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", printk 2160 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name); printk 2203 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: mode=%x,IRQ_STAT=0x%.4x,RXPKTCNT=0x%.2x RXPDL=0x%.2x TXPKTCNT=0x%.2x TXPDL=0x%.2x\n", printk 2225 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: rx_pdl_fill_compl interrupt although not busmaster?\n", dev->name); printk 2262 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: TX/RX Error IRQ\n", dev->name); printk 2290 drivers/net/ethernet/hp/hp100.c printk printk 2318 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: hp100_start_interface\n", dev->name); printk 2378 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: hp100_stop_interface\n", dev->name); printk 2402 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: hp100_stop_interface - timeout\n", dev->name); printk 2422 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: hp100_load_eeprom - timeout\n", dev->name); printk 2445 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: sense_lan: val_VG = 0x%04x, val_10 = 0x%04x\n", printk 2487 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: down_vg_link\n", dev->name); printk 2518 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: down_vg_link: Link does not go down?\n", dev->name); printk 2569 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: down_vg_link: timeout\n", dev->name); printk 2593 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: login_to_vg_hub\n", dev->name); printk 2604 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Start training\n", dev->name); printk 2619 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Bring down the link\n", dev->name); printk 2669 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Link cable status not ok? Training aborted.\n", dev->name); printk 2673 drivers/net/ethernet/hp/hp100.c printk printk 2683 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Passed training.\n", dev->name); printk 2695 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Successfully logged into the HUB.\n", dev->name); printk 2698 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Card supports 100VG MAC Version \"%s\" ", printk 2700 drivers/net/ethernet/hp/hp100.c printk("Driver will use MAC Version \"%s\"\n", (val & HP100_HUB_MACVER) ? "802.12" : "Pre"); printk 2701 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Frame format is %s.\n", dev->name, (val & HP100_MALLOW_FRAMEFMT) ? "802.5" : "802.3"); printk 2706 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Problem logging into the HUB.\n", dev->name); printk 2711 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: MAC Configuration requested: 0x%04x, HUB allowed: 0x%04x\n", dev->name, hp100_inw(TRAIN_REQUEST), val); printk 2714 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: HUB access denied.\n", dev->name); printk 2716 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: MAC Configuration is incompatible with the Network.\n", dev->name); printk 2718 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Duplicate MAC Address on the Network.\n", dev->name); printk 2739 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Training failed.\n", dev->name); printk 2755 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: cascade_reset\n", dev->name); printk 2787 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: Cascade Register Dump\n", dev->name); printk 2788 drivers/net/ethernet/hp/hp100.c printk("hardware id #1: 0x%.2x\n", hp100_inb(HW_ID)); printk 2789 drivers/net/ethernet/hp/hp100.c printk("hardware id #2/paging: 0x%.2x\n", hp100_inb(PAGING)); printk 2790 drivers/net/ethernet/hp/hp100.c printk("option #1: 0x%.4x\n", hp100_inw(OPTION_LSW)); printk 2791 drivers/net/ethernet/hp/hp100.c printk("option #2: 0x%.4x\n", hp100_inw(OPTION_MSW)); printk 2796 drivers/net/ethernet/hp/hp100.c printk("page: 0x%.2x\n", Page); printk 2801 drivers/net/ethernet/hp/hp100.c printk("0x%.2x = 0x%.4x\n", Register, inw(ioaddr + Register)); printk 2843 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name, printk 2891 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: PCI I/O Bit has not been set. Setting...\n", dev->name); printk 2899 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: PCI Master Bit has not been set. Setting...\n", dev->name); printk 2911 drivers/net/ethernet/hp/hp100.c printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr); printk 418 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", printk 432 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", printk 448 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: %s.\n", dev->name, str); printk 463 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n", printk 465 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n", printk 467 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x," printk 471 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR " errors: crc %lx, align %lx, resource %lx," printk 477 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n", printk 482 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "rfd_head = %p\n", rfd); printk 484 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR " %p .stat %04x, .cmd %04x, b_next %p, rbd %p," printk 491 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "rbd_head = %p\n", rbd); printk 493 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR " %p .count %04x, b_next %p, b_data %p, size %04x\n", printk 520 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: Error interrupt\n", dev->name); printk 678 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name)); printk 684 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name)); printk 708 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name)); printk 713 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name)); printk 718 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name)); printk 728 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name)); printk 736 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name)); printk 740 drivers/net/ethernet/i825xx/82596.c printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name); printk 752 drivers/net/ethernet/i825xx/82596.c DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n", printk 763 drivers/net/ethernet/i825xx/82596.c printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name); printk 767 drivers/net/ethernet/i825xx/82596.c DEB(DEB_RXFRAME, printk(KERN_DEBUG " rfd %p, rfd.rbd %p, rfd.stat %04x\n", printk 827 drivers/net/ethernet/i825xx/82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n", printk 871 drivers/net/ethernet/i825xx/82596.c DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames)); printk 915 drivers/net/ethernet/i825xx/82596.c DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n")); printk 943 drivers/net/ethernet/i825xx/82596.c DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n")); printk 972 drivers/net/ethernet/i825xx/82596.c printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name); printk 982 drivers/net/ethernet/i825xx/82596.c DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq)); printk 985 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); printk 1028 drivers/net/ethernet/i825xx/82596.c DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n", printk 1035 drivers/net/ethernet/i825xx/82596.c DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n")); printk 1040 drivers/net/ethernet/i825xx/82596.c DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n")); printk 1057 drivers/net/ethernet/i825xx/82596.c DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n", printk 1071 drivers/net/ethernet/i825xx/82596.c printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n", printk 1109 drivers/net/ethernet/i825xx/82596.c printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n", printk 1154 drivers/net/ethernet/i825xx/82596.c printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n"); printk 1189 drivers/net/ethernet/i825xx/82596.c DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr)); printk 1192 drivers/net/ethernet/i825xx/82596.c DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i])); printk 1194 drivers/net/ethernet/i825xx/82596.c DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq)); printk 1196 drivers/net/ethernet/i825xx/82596.c DEB(DEB_PROBE,printk(KERN_INFO "%s", version)); printk 1205 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), " printk 1257 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq); printk 1269 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n", printk 1279 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name)); printk 1281 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700)); printk 1286 drivers/net/ethernet/i825xx/82596.c DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n", printk 1323 drivers/net/ethernet/i825xx/82596.c DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name)); printk 1326 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: Transceiver problem.\n", dev->name); printk 1328 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: Termination problem.\n", dev->name); printk 1330 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: Short circuit.\n", dev->name); printk 1332 drivers/net/ethernet/i825xx/82596.c DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff)); printk 1358 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name)); printk 1363 drivers/net/ethernet/i825xx/82596.c DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status)); printk 1393 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name)); printk 1406 drivers/net/ethernet/i825xx/82596.c DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n", printk 1457 drivers/net/ethernet/i825xx/82596.c DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n", printk 1490 drivers/net/ethernet/i825xx/82596.c printk(KERN_ERR "%s: Only %d multicast addresses supported", printk 1510 drivers/net/ethernet/i825xx/82596.c DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n", printk 272 drivers/net/ethernet/i825xx/ether1.c printk ("\n"); printk 273 drivers/net/ethernet/i825xx/ether1.c printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X", printk 283 drivers/net/ethernet/i825xx/ether1.c printk ("\n"); printk 285 drivers/net/ethernet/i825xx/ether1.c printk (" - 0x%04X\n", i - 1); printk 292 drivers/net/ethernet/i825xx/ether1.c printk (" - 0x%04X\n", BUFFER_SIZE); printk 466 drivers/net/ethernet/i825xx/ether1.c printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n", printk 517 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name); printk 531 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status); printk 532 drivers/net/ethernet/i825xx/ether1.c printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, printk 548 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status); printk 549 drivers/net/ethernet/i825xx/ether1.c printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, printk 565 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status); printk 566 drivers/net/ethernet/i825xx/ether1.c printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, printk 582 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name); printk 583 drivers/net/ethernet/i825xx/ether1.c printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, printk 591 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name); printk 594 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name, printk 598 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name, printk 655 drivers/net/ethernet/i825xx/ether1.c printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n", printk 657 drivers/net/ethernet/i825xx/ether1.c printk(KERN_WARNING "%s: resetting device\n", dev->name); printk 662 drivers/net/ethernet/i825xx/ether1.c printk (KERN_ERR "%s: unable to restart interface\n", dev->name); printk 678 drivers/net/ethernet/i825xx/ether1.c printk(KERN_WARNING "%s: resetting device\n", dev->name); printk 683 drivers/net/ethernet/i825xx/ether1.c printk(KERN_ERR "%s: unable to restart interface\n", dev->name); printk 767 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name); printk 780 drivers/net/ethernet/i825xx/ether1.c printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name); printk 785 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name, printk 803 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: cts lost\n", dev->name); printk 811 drivers/net/ethernet/i825xx/ether1.c printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name); printk 818 drivers/net/ethernet/i825xx/ether1.c printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name); printk 828 drivers/net/ethernet/i825xx/ether1.c printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name); printk 874 drivers/net/ethernet/i825xx/ether1.c printk(KERN_WARNING "%s: %s\n", dev->name, printk 882 drivers/net/ethernet/i825xx/ether1.c printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n", printk 911 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name); printk 927 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name); printk 932 drivers/net/ethernet/i825xx/ether1.c printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name, printk 934 drivers/net/ethernet/i825xx/ether1.c printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, printk 972 drivers/net/ethernet/i825xx/ether1.c printk(KERN_INFO "%s", version); printk 1032 drivers/net/ethernet/i825xx/ether1.c printk(KERN_INFO "%s: ether1 in slot %d, %pM\n", printk 162 drivers/net/ethernet/i825xx/lasi_82596.c printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n", printk 167 drivers/net/ethernet/i825xx/lasi_82596.c printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", printk 183 drivers/net/ethernet/i825xx/lasi_82596.c printk(KERN_INFO printk 227 drivers/net/ethernet/i825xx/lasi_82596.c printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n"); printk 377 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: %s, iscp.stat %04x, didn't clear\n", printk 393 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", printk 411 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "lp and scp at %p, .sysbus = %08x, .iscp = %08x\n", printk 413 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "iscp at %p, iscp.stat = %08x, .scb = %08x\n", printk 415 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "scb at %p, scb.status = %04x, .command = %04x," printk 419 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG " errors: crc %x, align %x, resource %x," printk 426 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 434 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "rfd_head = %p\n", rfd); printk 436 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 445 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "rbd_head = %p\n", rbd); printk 447 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 576 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG "%s: starting i82596.\n", dev->name)); printk 586 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG printk 591 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); printk 601 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG printk 608 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name)); printk 614 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name)); printk 625 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name)); printk 635 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_DEBUG printk 642 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: Failed to initialise 82596\n", dev->name); printk 655 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_RXFRAME, printk(KERN_DEBUG printk 670 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: rbd chain broken!\n", dev->name); printk 674 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_RXFRAME, printk(KERN_DEBUG printk 743 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG printk 792 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_RXFRAME, printk(KERN_DEBUG "frames %d\n", frames)); printk 843 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_RESET, printk(KERN_DEBUG "i596_reset\n")); printk 874 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ADDCMD, printk(KERN_DEBUG "i596_add_cmd cmd_head %p\n", printk 908 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR printk 919 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_OPEN, printk(KERN_DEBUG printk 923 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: Failed to init rx bufs\n", dev->name); printk 927 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: Failed to init memory\n", dev->name); printk 944 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG printk 952 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG "Resetting board.\n")); printk 957 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG "Kicking board.\n")); printk 976 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_STARTTX, printk(KERN_DEBUG printk 992 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG printk 1032 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n", printk 1070 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__); printk 1094 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx, %pM IRQ %d.\n", printk 1097 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INIT, printk(KERN_INFO printk 1129 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INTS, printk(KERN_DEBUG printk 1136 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_ERRORS, printk(KERN_DEBUG printk 1148 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1153 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1165 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1208 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "%s: link ok.\n", printk 1212 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR printk 1216 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR printk 1220 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_ERR printk 1225 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG "%s: Time %d.\n", printk 1265 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1273 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1294 drivers/net/ethernet/i825xx/lib82596.c DEB(DEB_INTS, printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name)); printk 1308 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1342 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 1370 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_INFO printk 1383 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_NOTICE "%s: Only %d multicast addresses supported", printk 1402 drivers/net/ethernet/i825xx/lib82596.c printk(KERN_DEBUG printk 101 drivers/net/ethernet/i825xx/sni_82596.c printk(KERN_INFO "Found i82596 at 0x%x\n", res->start); printk 127 drivers/net/ethernet/i825xx/sni_82596.c printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n", printk 174 drivers/net/ethernet/i825xx/sni_82596.c printk(KERN_INFO SNI_82596_DRIVER_VERSION "\n"); printk 104 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_cuc,p->scb->cus); \ printk 112 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_ruc,p->scb->rus); \ printk 272 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Init-Problems (alloc).\n",dev->name); printk 354 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: SUN3 Intel 82586 found at %lx, ",dev->name,dev->base_addr); printk 365 drivers/net/ethernet/i825xx/sun3_82586.c printk("\n%s: Illegal memory size %d. Allowed is 0x2000 or 0x4000 or 0x8000 bytes.\n",dev->name,size); printk 370 drivers/net/ethernet/i825xx/sun3_82586.c printk("?memcheck, Can't find memory at 0x%lx with size %d!\n",dev->mem_start,size); printk 391 drivers/net/ethernet/i825xx/sun3_82586.c printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq); printk 435 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: switching to promisc. mode\n",dev->name); printk 453 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: configure command failed: %x\n",dev->name,swab16(cfg_cmd->cmd_status)); printk 477 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s (82586): individual address setup command failed: %04x\n",dev->name,swab16(ias_cmd->cmd_status)); printk 500 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Problems while running the TDR.\n",dev->name); printk 513 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: TDR: Transceiver problem. Check the cable(s)!\n",dev->name); printk 515 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: TDR: No correct termination %d clocks away.\n",dev->name,result & TDR_TIMEMASK); printk 519 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: TDR: Detected a short circuit %d clocks away.\n",dev->name,result & TDR_TIMEMASK); printk 522 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: TDR: Unknown status %04x\n",dev->name,result); printk 548 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Can't apply multicast-address-list.\n",dev->name); printk 589 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: not enough shared-mem for your configuration!\n",dev->name); printk 693 drivers/net/ethernet/i825xx/sun3_82586.c printk ("sun3_82586-interrupt: irq %d for unknown device.\n",irq); printk 699 drivers/net/ethernet/i825xx/sun3_82586.c printk("I"); printk 713 drivers/net/ethernet/i825xx/sun3_82586.c printk("(R)"); printk 723 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",dev->name,(int) stat,(int) p->scb->rus); printk 735 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: oops! CU has left active state. stat: %04x/%02x.\n",dev->name,(int) stat,(int) p->scb->cus); printk 740 drivers/net/ethernet/i825xx/sun3_82586.c printk("%d",cnt++); printk 745 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Acknowledge timed out.\n",dev->name); printk 752 drivers/net/ethernet/i825xx/sun3_82586.c printk("i"); printk 769 drivers/net/ethernet/i825xx/sun3_82586.c printk("R"); printk 804 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Whoops .. no end mark in RBD list\n",dev->name); printk 812 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: received oversized frame! length: %d\n",dev->name,totlen); printk 818 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: oops! rfd-error-status: %04x\n",dev->name,status); printk 830 drivers/net/ethernet/i825xx/sun3_82586.c printk("%d",cnt++); printk 850 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: RU hasn't fetched next RFD (not busy/complete)\n",dev->name); printk 861 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: received a FC intr. without having a frame: %04x %d\n",dev->name,status,old_at_least); printk 865 drivers/net/ethernet/i825xx/sun3_82586.c printk("%04x:%04x ",rfds->status,rbds->status); printk 868 drivers/net/ethernet/i825xx/sun3_82586.c printk("\nerrs: %04x %04x stat: %04x\n",(int)p->scb->rsc_errs,(int)p->scb->ovrn_errs,(int)p->scb->status); printk 869 drivers/net/ethernet/i825xx/sun3_82586.c printk("\nerrs: %04x %04x rus: %02x, cus: %02x\n",(int)p->scb->rsc_errs,(int)p->scb->ovrn_errs,(int)p->scb->rus,(int)p->scb->cus); printk 875 drivers/net/ethernet/i825xx/sun3_82586.c printk("r"); printk 897 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Receive-Unit restarted. Status: %04x\n",dev->name,p->scb->rus); printk 911 drivers/net/ethernet/i825xx/sun3_82586.c printk("X"); printk 915 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev->name); printk 926 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: late collision detected.\n",dev->name); printk 931 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: no carrier detected.\n",dev->name); printk 934 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: loss of CTS detected.\n",dev->name); printk 937 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: DMA underrun detected.\n",dev->name); printk 940 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Max. collisions exceeded.\n",dev->name); printk 976 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: strange ... timeout with CU active?!?\n",dev->name); printk 977 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev->name,(int)swab16(p->xmit_cmds[0]->cmd_status),(int)swab16(p->nop_cmds[0]->cmd_status),(int)swab16(p->nop_cmds[1]->cmd_status),(int)p->nop_point); printk 992 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev->name,p->scb->cus); printk 993 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status)); printk 994 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: check, whether you set the right interrupt number!\n",dev->name); printk 1017 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev->name,XMIT_BUFF_SIZE,skb->len); printk 1025 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Queue was locked\n",dev->name); printk 1045 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Hmmm .. CU is still running and we wanna send a new packet.\n",dev->name); printk 1046 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: stat: %04x %04x\n",dev->name,p->scb->cus,swab16(p->xmit_cmds[0]->cmd_status)); printk 1072 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Can't start transmit-command.\n",dev->name); printk 1180 drivers/net/ethernet/i825xx/sun3_82586.c printk("%s: Can't get dump information.\n",dev->name); printk 1183 drivers/net/ethernet/i825xx/sun3_82586.c printk("%02x ",(int) ((unsigned char *) (dump_cmd + 1))[i]); printk 1185 drivers/net/ethernet/i825xx/sun3_82586.c printk("\n"); printk 1187 drivers/net/ethernet/i825xx/sun3_82586.c printk("\n"); printk 131 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: %s\n", dev->ofdev->dev.of_node, error); printk 484 drivers/net/ethernet/ibm/emac/core.c printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", printk 496 drivers/net/ethernet/ibm/emac/core.c printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", printk 524 drivers/net/ethernet/ibm/emac/core.c printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n", printk 542 drivers/net/ethernet/ibm/emac/core.c printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", printk 1217 drivers/net/ethernet/ibm/emac/core.c printk(KERN_INFO "%s: link is up, %d %s%s\n", printk 1223 drivers/net/ethernet/ibm/emac/core.c printk(KERN_INFO "%s: link is down\n", dev->ndev->name); printk 1237 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%s: failed to request IRQ %d\n", printk 1245 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%s: failed to allocate RX ring\n", printk 2459 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: missing %s property\n", printk 2804 drivers/net/ethernet/ibm/emac/core.c printk(KERN_WARNING "%pOF: can't find PHY!\n", np); printk 2930 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: Flow control not disabled!\n", printk 2954 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: TAH support not enabled !\n", np); printk 2963 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: ZMII support not enabled !\n", np); printk 2972 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: RGMII support not enabled !\n", np); printk 2980 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: Can't find local-mac-address property\n", printk 3080 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: Can't map main interrupt\n", np); printk 3090 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: Can't map device registers!\n", np); printk 3098 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR printk 3114 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: failed to register with mal %pOF!\n", printk 3191 drivers/net/ethernet/ibm/emac/core.c printk(KERN_ERR "%pOF: failed to register net device (%d)!\n", printk 3206 drivers/net/ethernet/ibm/emac/core.c printk(KERN_INFO "%s: EMAC-%d %pOF, MAC %pM\n", printk 3210 drivers/net/ethernet/ibm/emac/core.c printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name); printk 3213 drivers/net/ethernet/ibm/emac/core.c printk("%s: found %s PHY (0x%02x)\n", ndev->name, printk 3364 drivers/net/ethernet/ibm/emac/core.c printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); printk 29 drivers/net/ethernet/ibm/emac/debug.h printk(KERN_DEBUG #name "%pOF: " fmt, d->ofdev->dev.of_node, ## arg) printk 45 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", printk 88 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_WARNING printk 240 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 251 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 320 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 471 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR "mal%d: reset timeout\n", mal->index); printk 537 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 547 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 557 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 564 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 576 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR "%pOF: Support for 405EZ not enabled!\n", printk 596 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_ERR printk 683 drivers/net/ethernet/ibm/emac/mal.c printk(KERN_INFO printk 87 drivers/net/ethernet/ibm/emac/rgmii.c printk(KERN_ERR "%pOF: unsupported settings !\n", printk 97 drivers/net/ethernet/ibm/emac/rgmii.c printk(KERN_NOTICE "%pOF: input %d in %s mode\n", printk 232 drivers/net/ethernet/ibm/emac/rgmii.c printk(KERN_ERR "%pOF: Can't get registers address\n", np); printk 240 drivers/net/ethernet/ibm/emac/rgmii.c printk(KERN_ERR "%pOF: Can't map device registers!\n", np); printk 258 drivers/net/ethernet/ibm/emac/rgmii.c printk(KERN_INFO printk 57 drivers/net/ethernet/ibm/emac/tah.c printk(KERN_ERR "%pOF: reset timeout\n", ofdev->dev.of_node); printk 103 drivers/net/ethernet/ibm/emac/tah.c printk(KERN_ERR "%pOF: Can't get registers address\n", np); printk 111 drivers/net/ethernet/ibm/emac/tah.c printk(KERN_ERR "%pOF: Can't map device registers!\n", np); printk 120 drivers/net/ethernet/ibm/emac/tah.c printk(KERN_INFO "TAH %pOF initialized\n", ofdev->dev.of_node); printk 119 drivers/net/ethernet/ibm/emac/zmii.c printk(KERN_NOTICE "%pOF: bridge in %s mode\n", printk 125 drivers/net/ethernet/ibm/emac/zmii.c printk(KERN_ERR printk 248 drivers/net/ethernet/ibm/emac/zmii.c printk(KERN_ERR "%pOF: Can't get registers address\n", np); printk 256 drivers/net/ethernet/ibm/emac/zmii.c printk(KERN_ERR "%pOF: Can't map device registers!\n", np); printk 266 drivers/net/ethernet/ibm/emac/zmii.c printk(KERN_INFO "ZMII %pOF initialized\n", ofdev->dev.of_node); printk 1911 drivers/net/ethernet/ibm/ibmveth.c printk(KERN_DEBUG "%s: %s %s\n", ibmveth_driver_name, printk 34 drivers/net/ethernet/jme.h printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ##args) printk 39 drivers/net/ethernet/jme.h printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ##args); \ printk 1191 drivers/net/ethernet/jme.h printk(KERN_DEBUG "%s: %-20s %08x@%s\n", jme->dev->name, printk 342 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: DMA error\n", dev->name); printk 546 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: split tx ignored\n", printk 632 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: DMA error\n", dev->name); printk 826 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: descriptor allocation failed\n", dev->name); printk 911 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: cannot restart device\n", dev->name); printk 944 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: cannot open device\n", dev->name); printk 953 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: unable to get Rx DMA IRQ %d\n", printk 960 drivers/net/ethernet/korina.c printk(KERN_ERR "%s: unable to get Tx DMA IRQ %d\n", printk 1048 drivers/net/ethernet/korina.c printk(KERN_ERR DRV_NAME ": cannot remap registers\n"); printk 1056 drivers/net/ethernet/korina.c printk(KERN_ERR DRV_NAME ": cannot remap Rx DMA registers\n"); printk 1064 drivers/net/ethernet/korina.c printk(KERN_ERR DRV_NAME ": cannot remap Tx DMA registers\n"); printk 1102 drivers/net/ethernet/korina.c printk(KERN_ERR DRV_NAME printk 1110 drivers/net/ethernet/korina.c printk(KERN_INFO "%s: " DRV_NAME "-" DRV_VERSION " " DRV_RELDATE "\n", printk 1408 drivers/net/ethernet/marvell/pxa168_eth.c printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n"); printk 92 drivers/net/ethernet/mellanox/mlx4/en_main.c printk("%s%s: %s: %pV", printk 95 drivers/net/ethernet/mellanox/mlx4/en_main.c printk("%s%s: %s: Port %d: %pV", printk 2384 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c printk(KERN_WARNING "mlx5: can't set and add to the same HW field (%x)\n", f->field); printk 2391 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c printk(KERN_WARNING "mlx5: parsed %d pedit actions, can't do more\n", nactions); printk 2440 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c printk(KERN_WARNING "mlx5: rewrite of few sub-fields (mask %lx) isn't offloaded\n", printk 586 drivers/net/ethernet/micrel/ks8842.c printk(KERN_ERR DRV_NAME": Failed to start RX DMA: %d\n", err); printk 985 drivers/net/ethernet/micrel/ks8842.c printk(KERN_WARNING DRV_NAME printk 893 drivers/net/ethernet/microchip/enc28j60.c printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len); printk 80 drivers/net/ethernet/natsemi/jazzsonic.c printk(KERN_ERR "%s: unable to get IRQ %d.\n", printk 134 drivers/net/ethernet/natsemi/macsonic.c printk(KERN_ERR "%s: unable to get IRQ %d.\n", printk 146 drivers/net/ethernet/natsemi/macsonic.c printk(KERN_ERR "%s: unable to get IRQ %d.\n", printk 267 drivers/net/ethernet/natsemi/macsonic.c printk(KERN_WARNING "macsonic: MAC address in PROM seems " printk 270 drivers/net/ethernet/natsemi/macsonic.c printk(KERN_WARNING "macsonic: cannot read MAC address from " printk 294 drivers/net/ethernet/natsemi/macsonic.c printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " printk 477 drivers/net/ethernet/natsemi/macsonic.c printk(KERN_ERR "macsonic: WTF, id is %d\n", id); printk 766 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s " printk 779 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 819 drivers/net/ethernet/natsemi/natsemi.c printk(version); printk 922 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 946 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n", printk 957 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "natsemi %s: %s at %#08llx " printk 963 drivers/net/ethernet/natsemi/natsemi.c printk(", port TP.\n"); printk 965 drivers/net/ethernet/natsemi/natsemi.c printk(", port MII, ignoring PHY\n"); printk 967 drivers/net/ethernet/natsemi/natsemi.c printk(", port MII, phy ad %d.\n", np->phy_addr_external); printk 1241 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 1245 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 1270 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "%s: switching to external transceiver.\n", printk 1305 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "%s: switching to internal transceiver.\n", printk 1326 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 1368 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n", printk 1431 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING "%s: reset did not complete in %d usec.\n", printk 1434 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "%s: reset completed in %d usec.\n", printk 1481 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n", printk 1484 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING "%s: RX reset took %d usec.\n", printk 1502 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n", printk 1505 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n", printk 1523 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n", printk 1526 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n", printk 1545 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", printk 1570 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n", printk 1666 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: link down.\n", printk 1675 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: link up.\n", dev->name); printk 1695 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 1762 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: Wake-up event %#08x\n", printk 1802 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "%s: Media selection timer tick.\n", printk 1818 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: possible phy reset: " printk 1867 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring); printk 1869 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", printk 1874 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); printk 1876 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n", printk 1894 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING printk 1904 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING printk 1956 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING "%s: going OOM.\n", dev->name); printk 2137 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", printk 2152 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG printk 2206 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG printk 2218 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING printk 2238 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG printk 2295 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG printk 2312 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING printk 2408 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO printk 2425 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE printk 2430 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE printk 2438 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: Link wake-up event %#08x\n", printk 2443 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: Rx status FIFO overrun\n", printk 2451 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name, printk 3041 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_WARNING printk 3134 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_INFO "%s: remaining active for wake-on-lan\n", printk 3168 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG printk 3172 drivers/net/ethernet/natsemi/natsemi.c printk(KERN_DEBUG printk 3387 drivers/net/ethernet/natsemi/natsemi.c printk(version); printk 467 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n", printk 692 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n", printk 699 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: link now down.\n", ndev->name); printk 810 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_DEBUG "%s: BAD\n", ndev->name); printk 1320 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: Duplex set via ethtool\n", printk 1333 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: autoneg enabled via ethtool\n", printk 1340 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name, printk 1458 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name); printk 1564 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", printk 1572 drivers/net/ethernet/natsemi/ns83820.c printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache); printk 1582 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", printk 1595 drivers/net/ethernet/natsemi/ns83820.c printk("ns83820_tx_watch: %u %u %d\n", printk 1602 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n", printk 1726 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n", printk 1729 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n", printk 1979 drivers/net/ethernet/natsemi/ns83820.c printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n", printk 2002 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n", printk 2006 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus. Disabled.\n", printk 2033 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: enabling optical transceiver\n", printk 2055 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: resetting phy\n", ndev->name); printk 2152 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: using 64 bit addressing.\n", printk 2157 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n", printk 2171 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err); printk 2235 drivers/net/ethernet/natsemi/ns83820.c printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n"); printk 77 drivers/net/ethernet/natsemi/sonic.c printk(KERN_ERR "%s: couldn't allocate receive buffers\n", printk 100 drivers/net/ethernet/natsemi/sonic.c printk(KERN_ERR "%s: couldn't map rx DMA buffers\n", printk 434 drivers/net/ethernet/natsemi/sonic.c printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n", printk 93 drivers/net/ethernet/natsemi/xtsonic.c printk(KERN_ERR "%s: unable to get IRQ %d.\n", printk 89 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ALERT "%s: Still Receiving traffic. Abort wait\n", printk 333 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR printk 341 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR "invalid .ncf file\n"); printk 344 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR "buffer overflow\n"); printk 347 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR "failed to flash the image\n"); printk 350 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR printk 354 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR "Unknown error of type %d\n", printk 361 drivers/net/ethernet/neterion/vxge/vxge-config.c printk(KERN_ERR "Unknown FW error: %d\n", ret_code); printk 2048 drivers/net/ethernet/neterion/vxge/vxge-config.h printk(fmt "\n", ##__VA_ARGS__); \ printk 1121 drivers/net/ethernet/neterion/vxge/vxge-ethtool.c printk(KERN_INFO "Single Function Mode is required to flash the" printk 1127 drivers/net/ethernet/neterion/vxge/vxge-ethtool.c printk(KERN_INFO "Interface %s must be down to flash the " printk 2764 drivers/net/ethernet/neterion/vxge/vxge-main.c printk(KERN_INFO "%s: Receive Hashing Offload %s\n", dev->name, printk 4179 drivers/net/ethernet/neterion/vxge/vxge-main.c printk(KERN_NOTICE "Upgrade to firmware version %d.%d.%d commencing\n", printk 4191 drivers/net/ethernet/neterion/vxge/vxge-main.c printk(KERN_NOTICE "Upgrade of firmware successful! Adapter must be " printk 597 drivers/net/ethernet/packetengines/hamachi.c printk(version); printk 634 drivers/net/ethernet/packetengines/hamachi.c printk("%2.2x%s", printk 738 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_INFO "%s: %s type %x at %p, %pM, IRQ %d.\n", printk 742 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_INFO "%s: %d-bit %d Mhz PCI bus (%d), Virtual Jumpers " printk 756 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_INFO "%s: MII PHY found at address %d, status " printk 802 drivers/net/ethernet/packetengines/hamachi.c printk(" EEPROM status is %2.2x after %d ticks.\n", printk 904 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Unsupported external memory config!\n", printk 946 drivers/net/ethernet/packetengines/hamachi.c printk("max_tx_latency: %d, max_tx_gap: %d, min_tx_pkt: %d\n", printk 949 drivers/net/ethernet/packetengines/hamachi.c printk("max_rx_latency: %d, max_rx_gap: %d, min_rx_pkt: %d\n", printk 952 drivers/net/ethernet/packetengines/hamachi.c printk("rx_int_var: %x, tx_int_var: %x\n", rx_int_var, tx_int_var); printk 978 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "%s: Done hamachi_open(), status: Rx %x Tx %x.\n", printk 1028 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_INFO "%s: Hamachi Autonegotiation status %4.4x, LPA " printk 1031 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_INFO "%s: Autonegotiation regs %4.4x %4.4x %4.4x " printk 1051 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Hamachi transmit timed out, status %8.8x," printk 1055 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring); printk 1057 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_CONT " %8.8x", printk 1059 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_CONT "\n"); printk 1060 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); printk 1062 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_CONT " %4.4x", printk 1064 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_CONT "\n"); printk 1218 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Hamachi transmit queue full at slot %d.\n",dev->name, hmp->cur_tx); printk 1281 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "%s: Hamachi transmit frame #%d queued in slot %d.\n", printk 1299 drivers/net/ethernet/packetengines/hamachi.c printk (KERN_ERR "hamachi_interrupt(): irq %d for unknown device.\n", irq); printk 1310 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "%s: Hamachi interrupt, status %4.4x.\n", printk 1367 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Too much work at interrupt, status=0x%4.4x.\n", printk 1374 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", printk 1382 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_ERR "%s: Emergency stop, looping startup interrupt.\n", printk 1402 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " In hamachi_rx(), entry %d status %4.4x.\n", printk 1423 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " hamachi_rx() status was %8.8x.\n", printk 1428 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Oversized Ethernet frame spanned " printk 1431 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Oversized Ethernet frame %p vs %p.\n", printk 1433 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_WARNING "%s: Oversized Ethernet frame -- next status %x/%x last status %x.\n", printk 1443 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " hamachi_rx() Rx error was %8.8x.\n", printk 1465 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " hamachi_rx() normal Rx pkt length %d" printk 1469 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG"%s: rx status %8.8x %8.8x %8.8x %8.8x %8.8x.\n", printk 1482 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_ERR "%s: rx_copybreak non-zero " printk 1618 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_INFO "%s: Link changed: AutoNegotiation Ctrl" printk 1636 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", printk 1655 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x Rx %4.4x Int %2.2x.\n", printk 1658 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", printk 1671 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " Tx ring at %8.8x:\n", printk 1674 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n", printk 1677 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " Rx ring %8.8x:\n", printk 1680 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n", printk 1688 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_DEBUG "Addr: "); printk 1690 drivers/net/ethernet/packetengines/hamachi.c printk(" %4.4x", addr[j]); printk 1691 drivers/net/ethernet/packetengines/hamachi.c printk("\n"); printk 1879 drivers/net/ethernet/packetengines/hamachi.c printk(KERN_NOTICE "%s: tx %08x, rx %08x intr\n", dev->name, printk 1930 drivers/net/ethernet/packetengines/hamachi.c printk(version); printk 392 drivers/net/ethernet/packetengines/yellowfin.c printk(version); printk 1040 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %08x\n", printk 1042 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " #%d desc. %08x %08x %08x\n", printk 1066 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " %s() status was %04x\n", printk 1081 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " %s() Rx error was %04x\n", printk 1117 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " %s() normal Rx pkt length %d of %d, bogus_cnt %d\n", printk 1214 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " Tx ring at %08llx:\n", printk 1217 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x %08x\n", printk 1221 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status); printk 1223 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " #%d status %04x %04x %04x %04x\n", printk 1227 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " Rx ring %08llx:\n", printk 1230 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x\n", printk 1238 drivers/net/ethernet/packetengines/yellowfin.c printk(KERN_DEBUG); printk 1408 drivers/net/ethernet/packetengines/yellowfin.c printk(version); printk 669 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n", printk 672 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n", printk 687 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\ printk 690 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta); printk 986 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_INFO "%s: Link is down.\n", dev->name); printk 1019 drivers/net/ethernet/pasemi/pasemi_mac.c printk("Unsupported speed %d\n", dev->phydev->speed); printk 1033 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_INFO "%s: Link is up at %d Mbps, %s duplex.\n", printk 1055 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_ERR "%s: Could not attach to phy\n", dev->name); printk 1296 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_DEBUG "pasemi_mac: rcmdsta error: 0x%08x\n", sta); printk 1303 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_DEBUG "pasemi_mac: ccmdsta error: 0x%08x\n", sta); printk 1308 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_DEBUG "pasemi_mac: tcmdsta error: 0x%08x\n", sta); printk 1770 drivers/net/ethernet/pasemi/pasemi_mac.c printk(KERN_INFO "%s: PA Semi %s: intf %d, hw addr %pM\n", printk 58 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c printk(KERN_ERR "%s: card response timeout.\n", printk 65 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c printk(KERN_ERR "%s: failed card response code:0x%x\n", printk 353 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c printk(KERN_WARNING printk 409 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c printk(KERN_WARNING printk 489 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c printk(KERN_WARNING printk 513 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c printk(KERN_WARNING printk 210 drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c printk(KERN_ERR "netxen-nic: Unsupported board model %d\n", printk 424 drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n", printk 513 drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c printk(KERN_ERR"%s: Unknown board type: %x\n", printk 591 drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c printk(KERN_ERR "%s: Unknown board type: %x\n", printk 761 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "ERROR. Could not send " printk 788 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "ERROR. Could not send " printk 816 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "ERROR. Could not send " printk 868 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "%s: could not configure RSS\n", printk 892 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "%s: could not notify %s IP 0x%x request\n", printk 914 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "%s: could not configure link notification\n", printk 941 drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c printk(KERN_ERR "%s: could not cleanup lro flows\n", printk 354 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk("Error waiting for rom done\n"); printk 433 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk(KERN_ERR "%s: ERROR Reading crb_init area: " printk 442 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk(KERN_ERR "%s: ERROR Reading crb_init area: " printk 451 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not" printk 476 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk(KERN_ERR"CRB init value out of range %x\n", printk 1406 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk(KERN_INFO "%s: unsupported cable: OUI 0x%x, length %d\n", printk 1409 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c printk(KERN_INFO "%s: unsupported cable length %d\n", printk 794 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ERR "%s: doorbell is disabled\n", printk 802 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ERR "%s: Failed to allocate doorbell map.", printk 1108 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ERR "%s: Failed to initialize port %d\n", printk 1227 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ERR "%s: Error in setting sw resources\n", printk 1234 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ERR "%s: Error in setting hw resources\n", printk 2156 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ALERT printk 2163 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_ALERT printk 2171 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_INFO printk 2186 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_INFO "%s: %s NIC Link is down\n", printk 2195 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_INFO "%s: %s NIC Link is up\n", printk 3466 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c printk(KERN_INFO "%s\n", netxen_nic_driver_string); printk 2310 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h printk(KERN_INFO "%s: %s: " _fmt, \ printk 658 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n", printk 4282 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c printk(KERN_INFO "%s\n", qlcnic_driver_string); printk 265 drivers/net/ethernet/realtek/atp.c printk("atp: Control register was %#2.2x.\n", saved_ctrl_reg); printk 274 drivers/net/ethernet/realtek/atp.c printk("atp: Registers are "); printk 276 drivers/net/ethernet/realtek/atp.c printk(" %2.2x", read_nibble(ioaddr, i)); printk 277 drivers/net/ethernet/realtek/atp.c printk(".\n"); printk 288 drivers/net/ethernet/realtek/atp.c printk(KERN_DEBUG "atp: Status nibble was %#2.2x..", status); printk 290 drivers/net/ethernet/realtek/atp.c printk(" %2.2x", read_nibble(ioaddr, i)); printk 291 drivers/net/ethernet/realtek/atp.c printk("\n"); printk 330 drivers/net/ethernet/realtek/atp.c printk(KERN_INFO "%s", version); printk 333 drivers/net/ethernet/realtek/atp.c printk(KERN_NOTICE "%s: Pocket adapter found at %#3lx, IRQ %d, " printk 470 drivers/net/ethernet/realtek/atp.c printk(KERN_DEBUG "%s: Reset: current Rx mode %d.\n", dev->name, printk 540 drivers/net/ethernet/realtek/atp.c printk(KERN_WARNING "%s: Transmit timed out, %s?\n", dev->name, printk 614 drivers/net/ethernet/realtek/atp.c printk(KERN_DEBUG "%s: In interrupt ", dev->name); printk 618 drivers/net/ethernet/realtek/atp.c printk("loop status %02x..", status); printk 626 drivers/net/ethernet/realtek/atp.c printk("handling Rx packet %02x..", read_status); printk 646 drivers/net/ethernet/realtek/atp.c printk("handling Tx done.."); printk 658 drivers/net/ethernet/realtek/atp.c if (net_debug > 6) printk("attempting to ReTx"); printk 676 drivers/net/ethernet/realtek/atp.c printk(KERN_DEBUG "%s: Missed packet? No Rx after %d Tx and " printk 709 drivers/net/ethernet/realtek/atp.c if (net_debug > 5) printk("exiting interrupt.\n"); printk 764 drivers/net/ethernet/realtek/atp.c printk(KERN_DEBUG " rx_count %04x %04x %04x %04x..", rx_head.pad, printk 771 drivers/net/ethernet/realtek/atp.c printk(KERN_DEBUG "%s: Unknown ATP Rx error %04x.\n", printk 866 drivers/net/ethernet/realtek/atp.c printk(KERN_INFO "%s", version); printk 124 drivers/net/ethernet/seeq/ether3.c printk("%s: setbuffer broken\n", dev->name); printk 214 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n"); printk 245 drivers/net/ethernet/seeq/ether3.c printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X", printk 254 drivers/net/ethernet/seeq/ether3.c printk(" - 0x%04X\n", i - 1); printk 255 drivers/net/ethernet/seeq/ether3.c printk("\n"); printk 261 drivers/net/ethernet/seeq/ether3.c printk(" - 0xffff\n"); printk 363 drivers/net/ethernet/seeq/ether3.c printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low); printk 371 drivers/net/ethernet/seeq/ether3.c printk(", read8 [%02X:%02X]\n", read_high, read_low); printk 384 drivers/net/ethernet/seeq/ether3.c printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val); printk 460 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name); printk 461 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name, printk 463 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name, printk 465 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name, printk 468 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev)); printk 554 drivers/net/ethernet/seeq/ether3.c printk("eth3irq: %d ", irq); printk 573 drivers/net/ethernet/seeq/ether3.c printk("done\n"); printk 614 drivers/net/ethernet/seeq/ether3.c printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head); printk 615 drivers/net/ethernet/seeq/ether3.c printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8); printk 617 drivers/net/ethernet/seeq/ether3.c printk("%02X ", addrs[i]); printk 618 drivers/net/ethernet/seeq/ether3.c printk("\n"); printk 736 drivers/net/ethernet/seeq/ether3.c printk(KERN_INFO "%s", version); printk 807 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); printk 812 drivers/net/ethernet/seeq/ether3.c printk(KERN_ERR "%s: %s found, but is an unsupported " printk 833 drivers/net/ethernet/seeq/ether3.c printk("%s: %s in slot %d, %pM\n", printk 256 drivers/net/ethernet/seeq/sgiseeq.c printk("RING DUMP:\n"); printk 258 drivers/net/ethernet/seeq/sgiseeq.c printk("RX [%d]: @(%p) [%08x,%08x,%08x] ", printk 262 drivers/net/ethernet/seeq/sgiseeq.c printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", printk 267 drivers/net/ethernet/seeq/sgiseeq.c printk("TX [%d]: @(%p) [%08x,%08x,%08x] ", printk 271 drivers/net/ethernet/seeq/sgiseeq.c printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", printk 275 drivers/net/ethernet/seeq/sgiseeq.c printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n", printk 277 drivers/net/ethernet/seeq/sgiseeq.c printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n", printk 279 drivers/net/ethernet/seeq/sgiseeq.c printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n", printk 532 drivers/net/ethernet/seeq/sgiseeq.c printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq); printk 650 drivers/net/ethernet/seeq/sgiseeq.c printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name); printk 746 drivers/net/ethernet/seeq/sgiseeq.c printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); printk 794 drivers/net/ethernet/seeq/sgiseeq.c printk(KERN_ERR "Sgiseeq: Cannot register net device, " printk 800 drivers/net/ethernet/seeq/sgiseeq.c printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr); printk 3891 drivers/net/ethernet/sfc/efx.c printk(KERN_INFO "Solarflare NET driver v" EFX_DRIVER_VERSION "\n"); printk 3929 drivers/net/ethernet/sfc/efx.c printk(KERN_INFO "Solarflare NET driver unloading\n"); printk 3230 drivers/net/ethernet/sfc/falcon/efx.c printk(KERN_INFO "Solarflare Falcon driver v" EF4_DRIVER_VERSION "\n"); printk 3258 drivers/net/ethernet/sfc/falcon/efx.c printk(KERN_INFO "Solarflare Falcon driver unloading\n"); printk 40 drivers/net/ethernet/sgi/meth.c #define DPRINTK(str,args...) printk(KERN_DEBUG "meth: %s: " str, __func__ , ## args) printk 335 drivers/net/ethernet/sgi/meth.c printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq); printk 406 drivers/net/ethernet/sgi/meth.c printk(KERN_DEBUG "%s: bogus packet size: %ld, status=%#2Lx.\n", printk 437 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: RX error: status=0x%016lx\n",status); printk 439 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "Receive Code Violation\n"); printk 441 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "CRC error\n"); printk 443 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "Invalid Preamble Context\n"); printk 445 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "Long Event Seen...\n"); printk 447 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "Bad Packet\n"); printk 449 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "Carrier Event Seen\n"); printk 505 drivers/net/ethernet/sgi/meth.c printk(" SUCCESS"); printk 507 drivers/net/ethernet/sgi/meth.c printk(" TOOLONG"); printk 509 drivers/net/ethernet/sgi/meth.c printk(" UNDERRUN"); printk 511 drivers/net/ethernet/sgi/meth.c printk(" EXCCOLL"); printk 513 drivers/net/ethernet/sgi/meth.c printk(" DEFER"); printk 515 drivers/net/ethernet/sgi/meth.c printk(" LATECOLL"); printk 516 drivers/net/ethernet/sgi/meth.c printk(" >\n"); printk 544 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: error status: 0x%08x\n",status); printk 547 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: link failure\n"); printk 550 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: memory error\n"); printk 552 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: aborted\n"); printk 554 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: Rx overflow\n"); printk 556 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "meth: Rx underflow\n"); printk 714 drivers/net/ethernet/sgi/meth.c printk(KERN_DEBUG "TX full: stopping\n"); printk 735 drivers/net/ethernet/sgi/meth.c printk(KERN_WARNING "%s: transmit timed out\n", dev->name); printk 852 drivers/net/ethernet/sgi/meth.c printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n", printk 531 drivers/net/ethernet/silan/sc92031.c printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n", printk 544 drivers/net/ethernet/silan/sc92031.c printk(KERN_INFO "%s: link down\n", dev->name); printk 750 drivers/net/ethernet/silan/sc92031.c printk(KERN_ERR "%s: rx packets length > rx buffer\n", printk 781 drivers/net/ethernet/silan/sc92031.c printk(KERN_ERR "%s: rx_len is too small\n", dev->name); printk 790 drivers/net/ethernet/silan/sc92031.c printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n", printk 1470 drivers/net/ethernet/silan/sc92031.c printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name, printk 267 drivers/net/ethernet/sis/sis900.c printk (KERN_WARNING "%s: Error EEPROM read %x\n", printk 300 drivers/net/ethernet/sis/sis900.c printk(KERN_WARNING "%s: Can not find ISA bridge\n", printk 442 drivers/net/ethernet/sis/sis900.c printk(version); printk 451 drivers/net/ethernet/sis/sis900.c printk(KERN_ERR "sis900.c: architecture does not support " printk 519 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: detected revision %2.2x, " printk 535 drivers/net/ethernet/sis/sis900.c printk(KERN_WARNING "%s: Unreadable or invalid MAC address," printk 545 drivers/net/ethernet/sis/sis900.c printk(KERN_WARNING "%s: Error probing MII device.\n", printk 563 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: %s at 0x%p, IRQ %d, %pM\n", printk 570 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name); printk 620 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: MII at address %d" printk 652 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: %s transceiver found " printk 661 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n", printk 668 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name); printk 692 drivers/net/ethernet/sis/sis900.c printk(KERN_WARNING "%s: reset phy and link down now\n", printk 761 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", printk 1108 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: Receive Filter Address[%d]=%x\n", printk 1146 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n", printk 1205 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n", printk 1341 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); printk 1461 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); printk 1524 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Media Link On %s %s-duplex\n", printk 1548 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n", printk 1651 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d " printk 1698 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Abnormal interrupt, " printk 1704 drivers/net/ethernet/sis/sis900.c printk(KERN_INFO "%s: Too much work at interrupt, " printk 1712 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: exiting interrupt, " printk 1739 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " printk 1763 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: Corrupted packet " printk 1804 drivers/net/ethernet/sis/sis900.c printk(KERN_WARNING "%s: NULL pointer " printk 1911 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: Transmit " printk 2090 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name); printk 2109 drivers/net/ethernet/sis/sis900.c printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name); printk 2569 drivers/net/ethernet/sis/sis900.c printk(version); printk 121 drivers/net/ethernet/smsc/smc911x.c printk(KERN_DEBUG); printk 130 drivers/net/ethernet/smsc/smc911x.c printk(KERN_DEBUG); printk 147 drivers/net/ethernet/smsc/smc9194.c #define PRINTK3(x) printk x printk 153 drivers/net/ethernet/smsc/smc9194.c #define PRINTK2(x) printk x printk 159 drivers/net/ethernet/smsc/smc9194.c #define PRINTK(x) printk x printk 483 drivers/net/ethernet/smsc/smc9194.c printk(CARDNAME": Bad Craziness - sent packet while busy.\n" ); printk 508 drivers/net/ethernet/smsc/smc9194.c printk(CARDNAME": Far too big packet error.\n"); printk 887 drivers/net/ethernet/smsc/smc9194.c printk(CARDNAME ": IOADDR %x doesn't match configuration (%x). " printk 903 drivers/net/ethernet/smsc/smc9194.c printk(CARDNAME ": IO %x: Unrecognized revision register:" printk 996 drivers/net/ethernet/smsc/smc9194.c printk(CARDNAME": Couldn't autodetect your IRQ. Use irq=xx.\n"); printk 1514 drivers/net/ethernet/smsc/smc9194.c printk(KERN_WARNING printk 170 drivers/net/ethernet/smsc/smc91x.c printk(KERN_DEBUG); printk 179 drivers/net/ethernet/smsc/smc91x.c printk(KERN_DEBUG); printk 3410 drivers/net/ethernet/sun/cassini.c printk("MTU limited to %d bytes\n", CAS_MAX_MTU); printk 4203 drivers/net/ethernet/sun/niu.c printk(KERN_DEBUG KBUILD_MODNAME ": " "%s() ldg[%p](%d)", printk 59 drivers/net/ethernet/sun/sunbmac.c #define DP(x) printk x printk 65 drivers/net/ethernet/sun/sunbmac.c #define DTX(x) printk x printk 71 drivers/net/ethernet/sun/sunbmac.c #define DIRQ(x) printk x printk 94 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BigMAC: Cannot reset the QEC.\n"); printk 143 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Transmitter will not reset.\n"); printk 144 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: tx_cfg is %08x\n", printk 158 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Receiver will not reset.\n"); printk 159 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: rx_cfg is %08x\n", printk 287 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "write_tcvr_bit: No transceiver type known!\n"); printk 309 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "read_tcvr_bit: No transceiver type known!\n"); printk 331 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "read_tcvr_bit2: No transceiver type known!\n"); printk 361 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "bigmac_tcvr_read: Whoops, no known transceiver type.\n"); printk 400 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "bigmac_tcvr_read: Whoops, no known transceiver type.\n"); printk 484 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: AIEEE, neither internal nor " printk 486 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: mgmt_pal[%08x] tcvr_pal[%08x]\n", printk 513 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name); printk 538 drivers/net/ethernet/sun/sunbmac.c printk(KERN_INFO "%s: Link is now up at %s.\n", printk 550 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "%s: Link down, cable problem?\n", printk 554 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "%s: Error, cannot re-init the " printk 567 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "%s: Aieee, link timer is asleep but we got one anyways!\n", printk 606 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name); printk 719 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "bigmac_is_medium_rare: "); printk 722 drivers/net/ethernet/sun/sunbmac.c printk("QEC_ERROR, "); printk 724 drivers/net/ethernet/sun/sunbmac.c printk("QEC_BMAC_ERROR, "); printk 728 drivers/net/ethernet/sun/sunbmac.c printk("BMAC_ERROR, "); printk 730 drivers/net/ethernet/sun/sunbmac.c printk("TXD_ERROR, "); printk 732 drivers/net/ethernet/sun/sunbmac.c printk("TX_LATE_ERROR, "); printk 734 drivers/net/ethernet/sun/sunbmac.c printk("TX_PARITY_ERROR, "); printk 736 drivers/net/ethernet/sun/sunbmac.c printk("TX_SBUS_ERROR, "); printk 739 drivers/net/ethernet/sun/sunbmac.c printk("RX_DROP_ERROR, "); printk 742 drivers/net/ethernet/sun/sunbmac.c printk("RX_SMALL_ERROR, "); printk 744 drivers/net/ethernet/sun/sunbmac.c printk("RX_LATE_ERROR, "); printk 746 drivers/net/ethernet/sun/sunbmac.c printk("RX_PARITY_ERROR, "); printk 748 drivers/net/ethernet/sun/sunbmac.c printk("RX_SBUS_ERROR, "); printk 751 drivers/net/ethernet/sun/sunbmac.c printk(" RESET\n"); printk 885 drivers/net/ethernet/sun/sunbmac.c printk(KERN_NOTICE "%s: Memory squeeze, deferring packet.\n", bp->dev->name); printk 920 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Can't order irq %d to go.\n", dev->irq); printk 1087 drivers/net/ethernet/sun/sunbmac.c printk(KERN_INFO "%s", version); printk 1105 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Cannot map QEC global registers.\n"); printk 1111 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BigMAC: AIEEE, QEC is not in BigMAC mode!\n"); printk 1138 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Cannot map QEC channel registers.\n"); printk 1146 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Cannot map BigMAC primary registers.\n"); printk 1156 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Cannot map BigMAC transceiver registers.\n"); printk 1192 drivers/net/ethernet/sun/sunbmac.c printk(KERN_ERR "BIGMAC: Cannot register device.\n"); printk 1198 drivers/net/ethernet/sun/sunbmac.c printk(KERN_INFO "%s: BigMAC 100baseT Ethernet %pM\n", printk 253 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: mif interrupt\n", gp->dev->name); printk 262 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: pcs interrupt, pcs_istat: 0x%x\n", printk 311 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: txmac interrupt, txmac_stat: 0x%x\n", printk 465 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: rxmac interrupt, rxmac_stat: 0x%x\n", printk 498 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: mac interrupt, mac_cstat: 0x%x\n", printk 595 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: no buffer for rx frame\n", printk 603 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: corrupt rx tag framing\n", printk 657 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: tx done, slot %d\n", printk 764 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: rx interrupt, done: %d, rx_new: %d\n", printk 947 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: gem_interrupt() gem_status: 0x%x\n", printk 1110 drivers/net/ethernet/sun/sungem.c printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n", printk 2792 drivers/net/ethernet/sun/sungem.c printk("\n"); printk 132 drivers/net/ethernet/sun/sunhme.c printk("TXLOG[%d]: j[%08x] tx[N(%d)O(%d)] action[%08x] stat[%08x]\n", i, printk 146 drivers/net/ethernet/sun/sunhme.c printk("TXD[%d..%d]: [%08x:%08x] [%08x:%08x] [%08x:%08x] [%08x:%08x]\n", printk 161 drivers/net/ethernet/sun/sunhme.c #define HMD(x) printk x printk 169 drivers/net/ethernet/sun/sunhme.c #define ASD(x) printk x printk 477 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Aieee, transceiver MIF read bolixed\n"); printk 510 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Aieee, transceiver MIF write bolixed\n"); printk 573 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Link is up using ", hp->dev->name); printk 575 drivers/net/ethernet/sun/sunhme.c printk("external "); printk 577 drivers/net/ethernet/sun/sunhme.c printk("internal "); printk 578 drivers/net/ethernet/sun/sunhme.c printk("transceiver at "); printk 582 drivers/net/ethernet/sun/sunhme.c printk("100Mb/s, Full Duplex.\n"); printk 584 drivers/net/ethernet/sun/sunhme.c printk("100Mb/s, Half Duplex.\n"); printk 587 drivers/net/ethernet/sun/sunhme.c printk("10Mb/s, Full Duplex.\n"); printk 589 drivers/net/ethernet/sun/sunhme.c printk("10Mb/s, Half Duplex.\n"); printk 595 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Link has been forced up using ", hp->dev->name); printk 597 drivers/net/ethernet/sun/sunhme.c printk("external "); printk 599 drivers/net/ethernet/sun/sunhme.c printk("internal "); printk 600 drivers/net/ethernet/sun/sunhme.c printk("transceiver at "); printk 603 drivers/net/ethernet/sun/sunhme.c printk("100Mb/s, "); printk 605 drivers/net/ethernet/sun/sunhme.c printk("10Mb/s, "); printk 607 drivers/net/ethernet/sun/sunhme.c printk("Full Duplex.\n"); printk 609 drivers/net/ethernet/sun/sunhme.c printk("Half Duplex.\n"); printk 707 drivers/net/ethernet/sun/sunhme.c printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful, trying force link mode\n", printk 767 drivers/net/ethernet/sun/sunhme.c printk(KERN_NOTICE "%s: Auto negotiation successful, link still " printk 823 drivers/net/ethernet/sun/sunhme.c printk(KERN_NOTICE "%s: Link down, cable problem?\n", printk 829 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Error, cannot re-init the " printk 852 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Aieee, link timer is asleep but we got one anyways!\n", printk 886 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Transceiver BigMac ATTACK!"); printk 906 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Receiver BigMac ATTACK!"); printk 928 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Fry guys."); printk 1146 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Transceiver and a coke please."); printk 1371 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal would not start auto negotiation " printk 1373 drivers/net/ethernet/sun/sunhme.c printk(KERN_NOTICE "%s: Performing force link detection.\n", printk 1643 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Eieee, rx config register gets greasy fries.\n"); printk 1644 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy meal: Trying to set %08x, reread gives %08x\n", printk 1782 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Error interrupt for happy meal, status = %08x\n", printk 1788 drivers/net/ethernet/sun/sunhme.c printk(KERN_DEBUG "%s: Happy Meal receive FIFO overflow.\n", hp->dev->name); printk 1793 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal BigMAC SQE test failed.\n", hp->dev->name); printk 1799 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal transmitter FIFO underrun, DMA error.\n", printk 1808 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal MAX Packet size error.\n", hp->dev->name); printk 1818 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Happy Meal out of receive " printk 1825 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal rx DMA errors [ ", hp->dev->name); printk 1827 drivers/net/ethernet/sun/sunhme.c printk("GenericError "); printk 1829 drivers/net/ethernet/sun/sunhme.c printk("ParityError "); printk 1831 drivers/net/ethernet/sun/sunhme.c printk("RxTagBotch "); printk 1832 drivers/net/ethernet/sun/sunhme.c printk("]\n"); printk 1840 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: EOP not set in happy meal transmit descriptor!\n", printk 1847 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal MIF interrupt.\n", hp->dev->name); printk 1853 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal tx DMA errors [ ", hp->dev->name); printk 1855 drivers/net/ethernet/sun/sunhme.c printk("GenericError "); printk 1857 drivers/net/ethernet/sun/sunhme.c printk("LateError "); printk 1859 drivers/net/ethernet/sun/sunhme.c printk("ParityError "); printk 1861 drivers/net/ethernet/sun/sunhme.c printk("TagBotch "); printk 1862 drivers/net/ethernet/sun/sunhme.c printk("]\n"); printk 1870 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: Happy Meal register access SBUS slave (%s) error.\n", printk 1877 drivers/net/ethernet/sun/sunhme.c printk(KERN_NOTICE "%s: Resetting...\n", hp->dev->name); printk 1889 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Link status change.\n", hp->dev->name); printk 1895 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Switching to 100Mbps at full duplex.", hp->dev->name); printk 1898 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Switching to 100MBps at half duplex.", hp->dev->name); printk 1901 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Switching to 10MBps at full duplex.", hp->dev->name); printk 1904 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Using 10Mbps at half duplex.", hp->dev->name); printk 1913 drivers/net/ethernet/sun/sunhme.c #define TXD(x) printk x printk 1977 drivers/net/ethernet/sun/sunhme.c #define RXD(x) printk x printk 2094 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Memory squeeze, deferring packet.\n", hp->dev->name); printk 2202 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happy_meal(SBUS): Can't order irq %d to go.\n", printk 2244 drivers/net/ethernet/sun/sunhme.c #define SXD(x) printk x printk 2253 drivers/net/ethernet/sun/sunhme.c printk (KERN_ERR "%s: transmit timed out, resetting\n", dev->name); printk 2255 drivers/net/ethernet/sun/sunhme.c printk (KERN_ERR "%s: Happy Status %08x TX[%08x:%08x]\n", dev->name, printk 2308 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n", printk 2610 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "Quattro HME: IRQ registration " printk 2715 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s", version); printk 2757 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal: Cannot map global registers.\n"); printk 2764 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal: Cannot map MAC TX registers.\n"); printk 2771 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal: Cannot map MAC RX registers.\n"); printk 2778 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal: Cannot map BIGMAC registers.\n"); printk 2785 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal: Cannot map TCVR registers.\n"); printk 2852 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal: Cannot register net device, " printk 2860 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Quattro HME slot %d (SBUS) 10/100baseT Ethernet ", printk 2863 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: HAPPY MEAL (SBUS) 10/100baseT Ethernet ", printk 2866 drivers/net/ethernet/sun/sunhme.c printk("%pM\n", dev->dev_addr); printk 3034 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s", version); printk 3052 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal(PCI): Cannot find proper PCI device base address.\n"); printk 3056 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal(PCI): Cannot obtain PCI resources, " printk 3062 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal(PCI): Unable to remap card memory.\n"); printk 3165 drivers/net/ethernet/sun/sunhme.c printk(KERN_ERR "happymeal(PCI): Cannot register net device, " printk 3180 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s%s: Quattro HME (PCI/CheerIO) 10/100baseT Ethernet ", dev->name, prom_name); printk 3183 drivers/net/ethernet/sun/sunhme.c printk("DEC 21153 PCI Bridge\n"); printk 3185 drivers/net/ethernet/sun/sunhme.c printk("unknown bridge %04x.%04x\n", printk 3190 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: Quattro HME slot %d (PCI/CheerIO) 10/100baseT Ethernet ", printk 3193 drivers/net/ethernet/sun/sunhme.c printk(KERN_INFO "%s: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet ", printk 3196 drivers/net/ethernet/sun/sunhme.c printk("%pM\n", dev->dev_addr); printk 78 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "QuadEther: AIEEE cannot reset the QEC!\n"); printk 103 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "QuadEther: AIEEE cannot reset the MACE!\n"); printk 118 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "QuadEther: Cannot reset QE channel!\n"); printk 241 drivers/net/ethernet/sun/sunqe.c printk(KERN_NOTICE "%s: Warning, link state is down.\n", qep->dev->name); printk 265 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Excessive transmit defers.\n", dev->name); printk 270 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Carrier lost, link down?\n", dev->name); printk 276 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Excessive transmit retries (more than 16).\n", dev->name); printk 282 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Late transmit collision.\n", dev->name); printk 289 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Transmit fifo underflow, driver bug.\n", dev->name); printk 295 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Jabber error.\n", dev->name); printk 299 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Babble error.\n", dev->name); printk 308 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Transmit descriptor is bogus, driver bug.\n", dev->name); printk 315 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Transmit late error.\n", dev->name); printk 321 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Transmit DMA parity error.\n", dev->name); printk 328 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Transmit DMA sbus error ack.\n", dev->name); printk 350 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Receive fifo overflow.\n", dev->name); printk 356 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Late receive collision.\n", dev->name); printk 372 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Receive packet dropped.\n", dev->name); printk 379 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Receive buffer too small, driver bug.\n", dev->name); printk 385 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Receive late error.\n", dev->name); printk 391 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Receive DMA parity error.\n", dev->name); printk 398 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: Receive DMA sbus error ack.\n", dev->name); printk 565 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name); printk 789 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "qec: Not in MACE mode!\n"); printk 802 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "qec: Can't register irq.\n"); printk 841 drivers/net/ethernet/sun/sunqe.c printk(KERN_INFO "%s", version); printk 872 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "qe: Cannot map channel registers.\n"); printk 879 drivers/net/ethernet/sun/sunqe.c printk(KERN_ERR "qe: Cannot map MACE registers.\n"); printk 908 drivers/net/ethernet/sun/sunqe.c printk(KERN_INFO "%s: qe channel[%d] %pM\n", dev->name, qe->channel, printk 220 drivers/net/ethernet/ti/cpmac.c printk("\n"); printk 221 drivers/net/ethernet/ti/cpmac.c printk("%s: reg[%p]:", dev->name, priv->regs + i); printk 223 drivers/net/ethernet/ti/cpmac.c printk(" %08x", cpmac_read(priv->regs, i)); printk 225 drivers/net/ethernet/ti/cpmac.c printk("\n"); printk 232 drivers/net/ethernet/ti/cpmac.c printk("%s: desc[%p]:", dev->name, desc); printk 234 drivers/net/ethernet/ti/cpmac.c printk(" %08x", ((u32 *)desc)[i]); printk 235 drivers/net/ethernet/ti/cpmac.c printk("\n"); printk 253 drivers/net/ethernet/ti/cpmac.c printk("%s: skb 0x%p, len=%d\n", dev->name, skb, skb->len); printk 257 drivers/net/ethernet/ti/cpmac.c printk("\n"); printk 258 drivers/net/ethernet/ti/cpmac.c printk("%s: data[%p]:", dev->name, skb->data + i); printk 260 drivers/net/ethernet/ti/cpmac.c printk(" %02x", ((u8 *)skb->data)[i]); printk 262 drivers/net/ethernet/ti/cpmac.c printk("\n"); printk 471 drivers/net/ethernet/ti/davinci_emac.c printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl); printk 2777 drivers/net/ethernet/ti/tlan.c printk(KERN_DEBUG "TLAN: %s has lost link\n", printk 2802 drivers/net/ethernet/ti/tlan.c printk(KERN_DEBUG "TLAN: %s has reestablished link\n", printk 46 drivers/net/ethernet/ti/tlan.h printk(KERN_DEBUG "TLAN: " format, ##args); \ printk 154 drivers/net/ethernet/toshiba/ps3_gelic_net.c printk(KERN_ERR "%s: status=%x\n", __func__, printk 156 drivers/net/ethernet/toshiba/ps3_gelic_net.c printk(KERN_ERR "%s: nextphy=%x\n", __func__, printk 158 drivers/net/ethernet/toshiba/ps3_gelic_net.c printk(KERN_ERR "%s: head=%p\n", __func__, printk 2503 drivers/net/ethernet/toshiba/spider_net.c printk(KERN_INFO "Spidernet version %s.\n", VERSION); printk 616 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_ERR "%s: no PHY found\n", dev->name); printk 625 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); printk 772 drivers/net/ethernet/toshiba/tc35815.c printk(version); printk 833 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_INFO "%s: %s at 0x%lx, %pM, IRQ %d\n", printk 904 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_DEBUG "%s: FD buf %p DataBuf", printk 906 drivers/net/ethernet/toshiba/tc35815.c printk("\n"); printk 969 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n", printk 987 drivers/net/ethernet/toshiba/tc35815.c printk("%s: tx_skbs mismatch(%d).\n", dev->name, i); printk 1019 drivers/net/ethernet/toshiba/tc35815.c printk("%s: tx_skbs mismatch(%d).\n", dev->name, i); printk 1057 drivers/net/ethernet/toshiba/tc35815.c printk("TxFD(%p): %08x %08x %08x %08x\n", fd, printk 1062 drivers/net/ethernet/toshiba/tc35815.c printk("BD: "); printk 1063 drivers/net/ethernet/toshiba/tc35815.c printk(" %08x %08x", printk 1066 drivers/net/ethernet/toshiba/tc35815.c printk("\n"); printk 1075 drivers/net/ethernet/toshiba/tc35815.c printk("RxFD(%p): %08x %08x %08x %08x\n", fd, printk 1082 drivers/net/ethernet/toshiba/tc35815.c printk("BD: "); printk 1084 drivers/net/ethernet/toshiba/tc35815.c printk(" %08x %08x", printk 1087 drivers/net/ethernet/toshiba/tc35815.c printk("\n"); printk 1096 drivers/net/ethernet/toshiba/tc35815.c printk("FrFD(%p): %08x %08x %08x %08x\n", fd, printk 1101 drivers/net/ethernet/toshiba/tc35815.c printk("BD: "); printk 1103 drivers/net/ethernet/toshiba/tc35815.c printk(" %08x %08x", printk 1106 drivers/net/ethernet/toshiba/tc35815.c printk("\n"); printk 1115 drivers/net/ethernet/toshiba/tc35815.c printk("TxFD base %p, start %u, end %u\n", printk 1117 drivers/net/ethernet/toshiba/tc35815.c printk("RxFD base %p limit %p cur %p\n", printk 1119 drivers/net/ethernet/toshiba/tc35815.c printk("FrFD %p\n", lp->fbl_ptr); printk 1133 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_DEBUG "print_eth(%p)\n", add); printk 1134 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_DEBUG " %pM => %pM : %02x%02x\n", printk 1152 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_ERR "%s: PHY init failed.\n", dev->name); printk 1197 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_WARNING "%s: transmit timed out, status %#x\n", printk 1289 drivers/net/ethernet/toshiba/tc35815.c printk("%s: tx_skbs conflict.\n", dev->name); printk 1312 drivers/net/ethernet/toshiba/tc35815.c printk("%s: starting TxFD.\n", dev->name); printk 1319 drivers/net/ethernet/toshiba/tc35815.c printk("%s: queueing TxFD.\n", dev->name); printk 1331 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_WARNING "%s: TxFD Exhausted.\n", dev->name); printk 1348 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_WARNING "%s: Fatal Error Interrupt (%#x):", printk 1351 drivers/net/ethernet/toshiba/tc35815.c printk(" IntPCI"); printk 1353 drivers/net/ethernet/toshiba/tc35815.c printk(" DmParErr"); printk 1355 drivers/net/ethernet/toshiba/tc35815.c printk(" IntNRAbt"); printk 1356 drivers/net/ethernet/toshiba/tc35815.c printk("\n"); printk 1359 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_WARNING "%s: Resetting ...\n", dev->name); printk 1436 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_ERR "%s: interrupt taken in poll\n", printk 1489 drivers/net/ethernet/toshiba/tc35815.c printk("%s: invalid BDID.\n", dev->name); printk 1495 drivers/net/ethernet/toshiba/tc35815.c printk("%s: NULL skb.\n", dev->name); printk 1545 drivers/net/ethernet/toshiba/tc35815.c printk("%s: invalid BDID.\n", dev->name); printk 1561 drivers/net/ethernet/toshiba/tc35815.c printk("%s: Freeing invalid BD.\n", printk 1589 drivers/net/ethernet/toshiba/tc35815.c printk("%s: RxFD FDNext invalid.\n", dev->name); printk 1607 drivers/net/ethernet/toshiba/tc35815.c printk("rfd_cur = %p, next_rfd %p\n", printk 1721 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_WARNING "%s: %s (%#x)\n", dev->name, msg, status); printk 1743 drivers/net/ethernet/toshiba/tc35815.c printk("%s: complete TxFD.\n", dev->name); printk 1752 drivers/net/ethernet/toshiba/tc35815.c printk("%s: tx_skbs mismatch.\n", dev->name); printk 1771 drivers/net/ethernet/toshiba/tc35815.c printk("%s: TxFD FDNext invalid.\n", dev->name); printk 1787 drivers/net/ethernet/toshiba/tc35815.c printk("%s: TxFD FDCtl invalid.\n", dev->name); printk 1800 drivers/net/ethernet/toshiba/tc35815.c printk("%s: start TxFD on queue.\n", printk 1867 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_DEBUG "%s: CAM %d: %pM\n", printk 2032 drivers/net/ethernet/toshiba/tc35815.c printk(KERN_ERR "%s: MAC reset failed.\n", dev->name); printk 164 drivers/net/ethernet/tundra/tsi108_eth.c printk("Dumping %s...\n", dev->name); printk 165 drivers/net/ethernet/tundra/tsi108_eth.c printk("intstat %x intmask %x phy_ok %d" printk 171 drivers/net/ethernet/tundra/tsi108_eth.c printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n", printk 177 drivers/net/ethernet/tundra/tsi108_eth.c printk("RX: head %d, tail %d, free %d, stat %x," printk 256 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s function time out\n", __func__); printk 352 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_NOTICE "%s : link is down\n", dev->name); printk 627 drivers/net/ethernet/tundra/tsi108_eth.c printk("%s: bad tx packet, misc %x\n", printk 652 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name); printk 655 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s: Transmit while link is down!\n", printk 665 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s: Transmit with full tx ring!\n", printk 717 drivers/net/ethernet/tundra/tsi108_eth.c printk("%s: Tx Frame contents (%d)\n", dev->name, printk 720 drivers/net/ethernet/tundra/tsi108_eth.c printk(" %2.2x", skb->data[i]); printk 721 drivers/net/ethernet/tundra/tsi108_eth.c printk(".\n"); printk 774 drivers/net/ethernet/tundra/tsi108_eth.c printk("%s: Rx Frame contents (%d)\n", printk 777 drivers/net/ethernet/tundra/tsi108_eth.c printk(" %2.2x", skb->data[i]); printk 778 drivers/net/ethernet/tundra/tsi108_eth.c printk(".\n"); printk 865 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_DEBUG "%s: RX error %x\n", printk 988 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s: TX error %x\n", dev->name, err); printk 1020 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_DEBUG "%s: SFN error\n", dev->name); printk 1052 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s function time out\n", __func__); printk 1126 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR printk 1229 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s function time out\n", __func__); printk 1267 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval); printk 1293 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n", printk 1298 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_NOTICE printk 1336 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_WARNING printk 1557 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "tsi-eth %d: Missing additional data!\n", printk 1568 drivers/net/ethernet/tundra/tsi108_eth.c printk("tsi108_eth%d: probe...\n", pdev->id); printk 1621 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s: Invalid MAC address. Please correct.\n", printk 1629 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_ERR "%s: Cannot register net device, aborting.\n", printk 1635 drivers/net/ethernet/tundra/tsi108_eth.c printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %pM\n", printk 450 drivers/net/ethernet/via/via-velocity.c printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n", printk 454 drivers/net/ethernet/via/via-velocity.c printk(KERN_INFO "%s: set parameter %s to %s\n", printk 1808 drivers/net/ethernet/via/via-velocity.c printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0])); printk 2726 drivers/net/ethernet/via/via-velocity.c printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id)); printk 2727 drivers/net/ethernet/via/via-velocity.c printk(KERN_INFO "%s: Ethernet Address: %pM\n", printk 2777 drivers/net/ethernet/via/via-velocity.c printk(KERN_INFO "%s Ver. %s\n", printk 2779 drivers/net/ethernet/via/via-velocity.c printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n"); printk 2780 drivers/net/ethernet/via/via-velocity.c printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n"); printk 1305 drivers/net/ethernet/via/via-velocity.h printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\ printk 1310 drivers/net/ethernet/via/via-velocity.h #define VELOCITY_DBG(p,args...) printk(p, ##args) printk 1316 drivers/net/ethernet/via/via-velocity.h #define VELOCITY_PRT(l, p, args...) do {if (l<=msglevel) printk( p ,##args);} while (0) printk 1322 drivers/net/ethernet/via/via-velocity.h printk("%02X",(p)->mCAMmask[i]);\ printk 1326 drivers/net/ethernet/via/via-velocity.h printk("%02X",(p)->vCAMmask[i]);\ printk 1328 drivers/net/ethernet/via/via-velocity.h printk("\n");\ printk 323 drivers/net/ethernet/xircom/xirc2ps_cs.c printk(KERN_DEBUG pr_fmt("Register common: ")); printk 328 drivers/net/ethernet/xircom/xirc2ps_cs.c printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); printk 338 drivers/net/ethernet/xircom/xirc2ps_cs.c printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); printk 444 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name); printk 464 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_ERR "%s #%i: MII write failed\n", bus->name, printk 470 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name, printk 479 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name, printk 498 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name, printk 514 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s #%i: MII write [%i] <- 0x%X, err = %i\n", printk 555 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_INFO "%s: link down\n", dev->name); printk 573 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n", printk 584 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len); printk 588 drivers/net/ethernet/xscale/ixp4xx_eth.c printk("%s%02X", printk 592 drivers/net/ethernet/xscale/ixp4xx_eth.c printk("\n"); printk 600 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X" printk 661 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name); printk 675 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_poll\n", dev->name); printk 689 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_poll napi_complete\n", printk 697 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_poll napi_reschedule succeeded\n", printk 704 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_poll all done\n", printk 770 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "eth_poll(): end, not all work done\n"); printk 781 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n"); printk 805 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n", printk 816 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n", printk 834 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_xmit\n", dev->name); printk 889 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name); printk 896 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_xmit ready again\n", printk 904 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name); printk 1070 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "%s: unable to request hardware queues\n", printk 1178 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_ERR "%s: %s not responding\n", dev->name, printk 1291 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name); printk 1315 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)" printk 1319 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i); printk 1335 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) " printk 1339 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i); printk 1344 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_CRIT "%s: unable to disable loopback\n", printk 1474 drivers/net/ethernet/xscale/ixp4xx_eth.c printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, printk 544 drivers/net/fddi/defxx.c printk(version); /* we only display this string ONCE */ printk 549 drivers/net/fddi/defxx.c printk(KERN_ERR "%s: Unable to allocate fddidev, aborting\n", printk 619 drivers/net/fddi/defxx.c printk(KERN_ERR "%s: Cannot map MMIO\n", print_name); printk 643 drivers/net/fddi/defxx.c printk("%s: registered as %s\n", print_name, dev->name); printk 1095 drivers/net/fddi/defxx.c printk("%s: Could not read adapter factory MAC address!\n", printk 1104 drivers/net/fddi/defxx.c printk("%s: Could not read adapter factory MAC address!\n", printk 1263 drivers/net/fddi/defxx.c printk("%s: Could not uninitialize/reset adapter!\n", bp->dev->name); printk 1297 drivers/net/fddi/defxx.c printk("%s: Could not set adapter burst size!\n", bp->dev->name); printk 1314 drivers/net/fddi/defxx.c printk("%s: Could not set consumer block address!\n", bp->dev->name); printk 1332 drivers/net/fddi/defxx.c printk("%s: Could not set descriptor block address!\n", printk 1346 drivers/net/fddi/defxx.c printk("%s: DMA command request failed!\n", bp->dev->name); printk 1362 drivers/net/fddi/defxx.c printk("%s: DMA command request failed!\n", bp->dev->name); printk 1370 drivers/net/fddi/defxx.c printk("%s: Adapter CAM update failed!\n", bp->dev->name); printk 1378 drivers/net/fddi/defxx.c printk("%s: Adapter filters update failed!\n", bp->dev->name); printk 1394 drivers/net/fddi/defxx.c printk("%s: Receive buffer allocation failed\n", bp->dev->name); printk 1405 drivers/net/fddi/defxx.c printk("%s: Start command failed\n", bp->dev->name); printk 1460 drivers/net/fddi/defxx.c printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq); printk 1496 drivers/net/fddi/defxx.c printk(KERN_ERR "%s: Adapter open failed!\n", dev->name); printk 1641 drivers/net/fddi/defxx.c printk("%s: Halt ID: Selftest Timeout\n", bp->dev->name); printk 1645 drivers/net/fddi/defxx.c printk("%s: Halt ID: Host Bus Parity Error\n", bp->dev->name); printk 1649 drivers/net/fddi/defxx.c printk("%s: Halt ID: Host-Directed Halt\n", bp->dev->name); printk 1653 drivers/net/fddi/defxx.c printk("%s: Halt ID: Adapter Software Fault\n", bp->dev->name); printk 1657 drivers/net/fddi/defxx.c printk("%s: Halt ID: Adapter Hardware Fault\n", bp->dev->name); printk 1661 drivers/net/fddi/defxx.c printk("%s: Halt ID: FDDI Network PC Trace Path Test\n", bp->dev->name); printk 1665 drivers/net/fddi/defxx.c printk("%s: Halt ID: Adapter DMA Error\n", bp->dev->name); printk 1669 drivers/net/fddi/defxx.c printk("%s: Halt ID: Firmware Image CRC Error\n", bp->dev->name); printk 1673 drivers/net/fddi/defxx.c printk("%s: Halt ID: 68000 Bus Exception\n", bp->dev->name); printk 1677 drivers/net/fddi/defxx.c printk("%s: Halt ID: Unknown (code = %X)\n", bp->dev->name, halt_id); printk 1754 drivers/net/fddi/defxx.c printk("%s: Non-Existent Memory Access Error\n", bp->dev->name); printk 1759 drivers/net/fddi/defxx.c printk("%s: Packet Memory Parity Error\n", bp->dev->name); printk 1764 drivers/net/fddi/defxx.c printk("%s: Host Bus Parity Error\n", bp->dev->name); printk 1770 drivers/net/fddi/defxx.c printk("%s: Resetting adapter...\n", bp->dev->name); printk 1773 drivers/net/fddi/defxx.c printk("%s: Adapter reset failed! Disabling adapter interrupts.\n", bp->dev->name); printk 1777 drivers/net/fddi/defxx.c printk("%s: Adapter reset successful!\n", bp->dev->name); printk 1811 drivers/net/fddi/defxx.c printk("%s: Controller has transitioned to HALTED state!\n", bp->dev->name); printk 1818 drivers/net/fddi/defxx.c printk("%s: Resetting adapter...\n", bp->dev->name); printk 1821 drivers/net/fddi/defxx.c printk("%s: Adapter reset failed! Disabling adapter interrupts.\n", bp->dev->name); printk 1825 drivers/net/fddi/defxx.c printk("%s: Adapter reset successful!\n", bp->dev->name); printk 3183 drivers/net/fddi/defxx.c printk("%s: Could not allocate receive buffer. Dropping packet.\n", bp->dev->name); printk 3314 drivers/net/fddi/defxx.c printk("%s: Invalid packet length - %u bytes\n", printk 1698 drivers/net/fddi/defxx.h #define DBG_printk(args...) printk(args) printk 249 drivers/net/fddi/skfp/ess.c printk(KERN_ERR "ESS: sm_to_para failed"); printk 255 drivers/net/fddi/skfp/ess.c printk(KERN_ERR "ESS: sm_to_para failed"); printk 48 drivers/net/fddi/skfp/h/osdef1st.h #define SMT_PANIC(smc, nr, msg) printk(KERN_INFO "SMT PANIC: code: %d, msg: %s\n",nr,msg) printk 52 drivers/net/fddi/skfp/h/osdef1st.h #define printf(s,args...) printk(KERN_INFO s, ## args) printk 210 drivers/net/fddi/skfp/skfddi.c printk("%s\n", boot_msg); printk 224 drivers/net/fddi/skfp/skfddi.c printk(KERN_ERR "skfp: region is not an MMIO resource\n"); printk 232 drivers/net/fddi/skfp/skfddi.c printk(KERN_ERR "skfp: region is not PIO resource\n"); printk 240 drivers/net/fddi/skfp/skfddi.c printk(KERN_ERR "skfp: Unable to map register, " printk 248 drivers/net/fddi/skfp/skfddi.c printk(KERN_ERR "skfp: Unable to allocate fddi device, " printk 287 drivers/net/fddi/skfp/skfddi.c printk("%s: SysKonnect FDDI PCI adapter" printk 291 drivers/net/fddi/skfp/skfddi.c printk("%s: FDDI PCI adapter found\n", dev->name); printk 397 drivers/net/fddi/skfp/skfddi.c printk("could not allocate mem for "); printk 398 drivers/net/fddi/skfp/skfddi.c printk("LocalRxBuffer: %d byte\n", MAX_FRAME_SIZE); printk 413 drivers/net/fddi/skfp/skfddi.c printk("could not allocate mem for "); printk 414 drivers/net/fddi/skfp/skfddi.c printk("hardware module: %ld byte\n", printk 981 drivers/net/fddi/skfp/skfddi.c printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd); printk 1310 drivers/net/fddi/skfp/skfddi.c printk("Unexpected SMT memory size requested: %d\n", size); printk 1360 drivers/net/fddi/skfp/skfddi.c printk("fddi: Unable to align descriptor memory.\n"); printk 1528 drivers/net/fddi/skfp/skfddi.c printk(KERN_INFO "---Packet start---\n"); printk 1530 drivers/net/fddi/skfp/skfddi.c printk(KERN_INFO "%02x %02x %02x %02x %02x %02x %02x %02x\n", printk 1538 drivers/net/fddi/skfp/skfddi.c printk(KERN_INFO "%s\n", s); printk 1539 drivers/net/fddi/skfp/skfddi.c printk(KERN_INFO "------------------\n"); printk 1581 drivers/net/fddi/skfp/skfddi.c printk("fddi: Multi-fragment receive!\n"); printk 1624 drivers/net/fddi/skfp/skfddi.c printk("fddi: Invalid RIF.\n"); printk 1700 drivers/net/fddi/skfp/skfddi.c printk("fddi: Multi-fragment requeue!\n"); printk 1842 drivers/net/fddi/skfp/skfddi.c printk("fddi: Multi-fragment clear!\n"); printk 241 drivers/net/hamradio/6pack.c printk(KERN_DEBUG "%s: %s - dropped.\n", sp->dev->name, msg); printk 492 drivers/net/hamradio/6pack.c printk(KERN_INFO "%s: %s\n", sp->dev->name, msg); printk 772 drivers/net/hamradio/6pack.c printk(msg_banner); printk 776 drivers/net/hamradio/6pack.c printk(msg_regfail, status); printk 789 drivers/net/hamradio/6pack.c printk(msg_unregfail, ret); printk 870 drivers/net/hamradio/6pack.c printk(KERN_DEBUG "6pack: protocol violation\n"); printk 932 drivers/net/hamradio/6pack.c printk(KERN_DEBUG "6pack: bad checksum %2.2x\n", checksum); printk 940 drivers/net/hamradio/6pack.c case SIXP_TX_URUN: printk(KERN_DEBUG "6pack: TX underrun\n"); printk 942 drivers/net/hamradio/6pack.c case SIXP_RX_ORUN: printk(KERN_DEBUG "6pack: RX overrun\n"); printk 945 drivers/net/hamradio/6pack.c printk(KERN_DEBUG "6pack: RX buffer overflow\n"); printk 310 drivers/net/hamradio/baycom_epp.c printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg); printk 322 drivers/net/hamradio/baycom_epp.c #define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b) printk 539 drivers/net/hamradio/baycom_epp.c printk("%s: memory squeeze, dropping packet\n", dev->name); printk 753 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname); printk 805 drivers/net/hamradio/baycom_epp.c printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name); printk 807 drivers/net/hamradio/baycom_epp.c printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name); printk 832 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr); printk 837 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base); printk 843 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n", printk 866 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base); printk 870 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base); printk 879 drivers/net/hamradio/baycom_epp.c printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname); printk 921 drivers/net/hamradio/baycom_epp.c printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n", printk 941 drivers/net/hamradio/baycom_epp.c printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname); printk 966 drivers/net/hamradio/baycom_epp.c printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n", printk 1226 drivers/net/hamradio/baycom_epp.c printk(bc_drvinfo); printk 1242 drivers/net/hamradio/baycom_epp.c printk(KERN_WARNING "bce%d : out of memory\n", i); printk 1255 drivers/net/hamradio/baycom_epp.c printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name); printk 1286 drivers/net/hamradio/baycom_epp.c printk(paranoia_str, "cleanup_module"); printk 288 drivers/net/hamradio/baycom_par.c printk(KERN_DEBUG "baycom_par: %s: why am I being woken up?\n", dev->name); printk 290 drivers/net/hamradio/baycom_par.c printk(KERN_DEBUG "baycom_par: %s: I'm broken.\n", dev->name); printk 306 drivers/net/hamradio/baycom_par.c printk(KERN_ERR "baycom_par: parport at 0x%lx unknown\n", dev->base_addr); printk 310 drivers/net/hamradio/baycom_par.c printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base); printk 315 drivers/net/hamradio/baycom_par.c printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base); printk 338 drivers/net/hamradio/baycom_par.c printk(KERN_ERR "baycom_par: cannot register parport at 0x%lx\n", dev->base_addr); printk 342 drivers/net/hamradio/baycom_par.c printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base); printk 352 drivers/net/hamradio/baycom_par.c printk(KERN_INFO "%s: par96 at iobase 0x%lx irq %u options 0x%x\n", printk 373 drivers/net/hamradio/baycom_par.c printk(KERN_INFO "%s: close par96 at iobase 0x%lx irq %u\n", printk 514 drivers/net/hamradio/baycom_par.c printk(bc_drvinfo); printk 383 drivers/net/hamradio/baycom_ser_fdx.c printk(KERN_INFO "baycom_ser_fdx: invalid portnumber (max %u) " printk 389 drivers/net/hamradio/baycom_ser_fdx.c printk(KERN_INFO "baycom_ser_fdx: invalid baudrate " printk 394 drivers/net/hamradio/baycom_ser_fdx.c printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy\n", printk 433 drivers/net/hamradio/baycom_ser_fdx.c printk(KERN_INFO "%s: ser_fdx at iobase 0x%lx irq %u baud %u uart %s\n", printk 453 drivers/net/hamradio/baycom_ser_fdx.c printk(KERN_INFO "%s: close ser_fdx at iobase 0x%lx irq %u\n", printk 594 drivers/net/hamradio/baycom_ser_fdx.c printk(bc_drvinfo); printk 492 drivers/net/hamradio/baycom_ser_hdx.c printk(KERN_INFO "%s: ser12 at iobase 0x%lx irq %u uart %s\n", printk 512 drivers/net/hamradio/baycom_ser_hdx.c printk(KERN_INFO "%s: close ser12 at iobase 0x%lx irq %u\n", printk 645 drivers/net/hamradio/baycom_ser_hdx.c printk(bc_drvinfo); printk 550 drivers/net/hamradio/bpqether.c printk(KERN_ERR printk 560 drivers/net/hamradio/bpqether.c printk(banner); printk 310 drivers/net/hamradio/dmascc.c printk(KERN_INFO "dmascc: autoprobing (dangerous)\n"); printk 413 drivers/net/hamradio/dmascc.c printk(KERN_INFO "dmascc: no adapters found\n"); printk 460 drivers/net/hamradio/dmascc.c printk(KERN_ERR "dmascc: " printk 469 drivers/net/hamradio/dmascc.c printk(KERN_ERR "dmascc: " printk 540 drivers/net/hamradio/dmascc.c printk(KERN_ERR printk 578 drivers/net/hamradio/dmascc.c printk(KERN_ERR "dmascc: could not register %s\n", printk 584 drivers/net/hamradio/dmascc.c printk(KERN_ERR "dmascc: could not register %s\n", printk 593 drivers/net/hamradio/dmascc.c printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n", printk 1110 drivers/net/hamradio/dmascc.c printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n", printk 143 drivers/net/hamradio/hdlcdrv.c printk("%s: memory squeeze, dropping packet\n", dev->name); printk 216 drivers/net/hamradio/hdlcdrv.c #define PKP(a,b) printk(KERN_INFO "hdlcdrv.c: channel params: " a "\n", b) printk 711 drivers/net/hamradio/hdlcdrv.c printk(KERN_WARNING "hdlcdrv: cannot register net " printk 746 drivers/net/hamradio/hdlcdrv.c printk(KERN_INFO "hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA\n"); printk 747 drivers/net/hamradio/hdlcdrv.c printk(KERN_INFO "hdlcdrv: version 0.8\n"); printk 755 drivers/net/hamradio/hdlcdrv.c printk(KERN_INFO "hdlcdrv: cleanup\n"); printk 250 drivers/net/hamradio/mkiss.c printk(KERN_INFO printk 264 drivers/net/hamradio/mkiss.c printk(KERN_INFO printk 284 drivers/net/hamradio/mkiss.c printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", printk 376 drivers/net/hamradio/mkiss.c printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, " printk 433 drivers/net/hamradio/mkiss.c printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name); printk 469 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: crc mode set to %d\n", printk 484 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: Trying crc-smack\n", ax->dev->name); printk 493 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: Trying crc-flexnet\n", ax->dev->name); printk 526 drivers/net/hamradio/mkiss.c printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name); printk 540 drivers/net/hamradio/mkiss.c printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name, printk 733 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: crc mode smack forced.\n", printk 738 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: crc mode flexnet forced.\n", printk 743 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: crc mode disabled.\n", printk 750 drivers/net/hamradio/mkiss.c printk(KERN_INFO "mkiss: %s: crc mode is auto.\n", printk 955 drivers/net/hamradio/mkiss.c printk(banner); printk 959 drivers/net/hamradio/mkiss.c printk(msg_regfail, status); printk 972 drivers/net/hamradio/mkiss.c printk(msg_unregfail, ret); printk 550 drivers/net/hamradio/scc.c printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n"); printk 657 drivers/net/hamradio/scc.c printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n"); printk 689 drivers/net/hamradio/scc.c printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n"); printk 1467 drivers/net/hamradio/scc.c printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2); printk 1473 drivers/net/hamradio/scc.c printk("%s%d", flag, k); printk 1476 drivers/net/hamradio/scc.c printk("\n"); printk 1531 drivers/net/hamradio/scc.c printk(KERN_ERR "%s: can't register network device (%d)\n", printk 1743 drivers/net/hamradio/scc.c printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq); printk 1750 drivers/net/hamradio/scc.c printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch); printk 1804 drivers/net/hamradio/scc.c printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n", printk 1810 drivers/net/hamradio/scc.c printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n", printk 2098 drivers/net/hamradio/scc.c printk(banner); printk 2105 drivers/net/hamradio/scc.c printk(KERN_ERR "z8530drv: cannot initialize module\n"); printk 355 drivers/net/hamradio/yam.c printk(KERN_ERR "yam: Failed to register firmware\n"); printk 361 drivers/net/hamradio/yam.c printk(KERN_ERR "Failed to load firmware \"%s\"\n", printk 366 drivers/net/hamradio/yam.c printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n", printk 374 drivers/net/hamradio/yam.c printk(KERN_ERR "yam: Invalid predef number %u\n", predef); printk 441 drivers/net/hamradio/yam.c printk(KERN_ERR "yam: error in write cycle\n"); printk 538 drivers/net/hamradio/yam.c printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name); printk 757 drivers/net/hamradio/yam.c printk(KERN_ERR "%s: too many irq iir=%d\n", printk 841 drivers/net/hamradio/yam.c printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq); printk 851 drivers/net/hamradio/yam.c printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr); printk 855 drivers/net/hamradio/yam.c printk(KERN_ERR "%s: cannot find uart type\n", dev->name); printk 860 drivers/net/hamradio/yam.c printk(KERN_ERR "%s: cannot init FPGA\n", dev->name); printk 866 drivers/net/hamradio/yam.c printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq); printk 885 drivers/net/hamradio/yam.c printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq, printk 916 drivers/net/hamradio/yam.c printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n", printk 1120 drivers/net/hamradio/yam.c printk(yam_drvinfo); printk 1135 drivers/net/hamradio/yam.c printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name); printk 127 drivers/net/hippi/rrunner.c printk(version); printk 138 drivers/net/hippi/rrunner.c printk(KERN_INFO "%s: Essential RoadRunner serial HIPPI " printk 148 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Unable to map I/O register, " printk 225 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: trying to unload running NIC\n", printk 259 drivers/net/hippi/rrunner.c printk("issuing command for halted NIC, code 0x%x, " printk 262 drivers/net/hippi/rrunner.c printk("error codes Fail1 %02x, Fail2 %02x\n", printk 276 drivers/net/hippi/rrunner.c printk("error code %02x\n", readl(®s->Fail1)); printk 378 drivers/net/hippi/rrunner.c printk("%s: Executing firmware at address 0x%06x\n", printk 482 drivers/net/hippi/rrunner.c printk("data mismatch: %08x, " printk 512 drivers/net/hippi/rrunner.c printk(" Firmware revision: %i.%i.%i\n", (rev >> 16), printk 515 drivers/net/hippi/rrunner.c printk(" Firmware revision: %i.%i.%i (2.0.37 or " printk 519 drivers/net/hippi/rrunner.c printk(" Firmware revision too old: %i.%i.%i, please " printk 525 drivers/net/hippi/rrunner.c printk(" Maximum receive rings %i\n", readl(®s->MaxRxRng)); printk 542 drivers/net/hippi/rrunner.c printk(" MAC: %pM\n", dev->dev_addr); printk 545 drivers/net/hippi/rrunner.c printk(" SRAM size 0x%06x\n", sram_size); printk 571 drivers/net/hippi/rrunner.c printk("%s: Parity error halting NIC - this is serious!\n", printk 645 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Unable to allocate memory " printk 658 drivers/net/hippi/rrunner.c printk("skb alloc error\n"); printk 734 drivers/net/hippi/rrunner.c printk(KERN_INFO "%s: Firmware revision %i.%i.%i " printk 742 drivers/net/hippi/rrunner.c printk(KERN_INFO "%s: Optical link ON\n", dev->name); printk 745 drivers/net/hippi/rrunner.c printk(KERN_INFO "%s: Optical link OFF\n", dev->name); printk 748 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: RX data not moving\n", printk 752 drivers/net/hippi/rrunner.c printk(KERN_INFO "%s: The watchdog is here to see " printk 756 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: HIPPI Internal NIC error\n", printk 763 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Host software error\n", printk 773 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Connection rejected\n", printk 778 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Connection timeout\n", printk 782 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: HIPPI disconnect error\n", printk 787 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: HIPPI Internal Parity error\n", printk 794 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Transmitter idle\n", printk 798 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Link lost during transmit\n", printk 806 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Invalid send ring block\n", printk 813 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Invalid send buffer address\n", printk 820 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Invalid descriptor address\n", printk 830 drivers/net/hippi/rrunner.c printk(KERN_INFO "%s: Receive ring full\n", dev->name); printk 834 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Receive parity error\n", printk 838 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Receive LLRC error\n", printk 842 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Receive packet length " printk 846 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Data checksum error\n", printk 850 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Unexpected short burst " printk 854 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Recv. state transition" printk 858 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Unexpected data error\n", printk 862 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Link lost error\n", printk 866 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Framing Error\n", printk 870 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Flag sync. lost during " printk 874 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Invalid receive buffer " printk 881 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Invalid receive descriptor " printk 888 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Invalid ring block\n", printk 912 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Unhandled event 0x%02x\n", printk 936 drivers/net/hippi/rrunner.c printk("index %i, rxlimit %i\n", index, rxlimit); printk 937 drivers/net/hippi/rrunner.c printk("len %x, mode %x\n", pkt_len, desc->mode); printk 952 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Unable to allocate skb (%i bytes), deferring packet\n", dev->name, pkt_len); printk 989 drivers/net/hippi/rrunner.c printk("%s: Out of memory, deferring " printk 1038 drivers/net/hippi/rrunner.c printk("%s: interrupt, prodidx = %i, eidx = %i\n", dev->name, printk 1153 drivers/net/hippi/rrunner.c printk("%s: Restarting nic\n", dev->name); printk 1185 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: trying to configure device with " printk 1215 drivers/net/hippi/rrunner.c printk(KERN_WARNING "%s: Requested IRQ %d is busy\n", printk 1267 drivers/net/hippi/rrunner.c printk("%s: dumping NIC TX rings\n", dev->name); printk 1269 drivers/net/hippi/rrunner.c printk("RxPrd %08x, TxPrd %02x, EvtPrd %08x, TxPi %02x, TxCtrlPi %02x\n", printk 1274 drivers/net/hippi/rrunner.c printk("Error code 0x%x\n", readl(®s->Fail1)); printk 1278 drivers/net/hippi/rrunner.c printk("TX ring index %i, TX consumer %i\n", printk 1283 drivers/net/hippi/rrunner.c printk("skbuff for index %i is valid - dumping data (0x%x bytes - DMA len 0x%x)\n", index, len, rrpriv->tx_ring[index].size); printk 1286 drivers/net/hippi/rrunner.c printk("\n"); printk 1287 drivers/net/hippi/rrunner.c printk("%02x ", (unsigned char) rrpriv->tx_skbuff[index]->data[i]); printk 1289 drivers/net/hippi/rrunner.c printk("\n"); printk 1294 drivers/net/hippi/rrunner.c printk("skbuff for cons %i is valid - dumping data (0x%x bytes - skbuff len 0x%x)\n", cons, len, rrpriv->tx_skbuff[cons]->len); printk 1295 drivers/net/hippi/rrunner.c printk("mode 0x%x, size 0x%x,\n phys %08Lx, skbuff-addr %p, truesize 0x%x\n", printk 1303 drivers/net/hippi/rrunner.c printk("\n"); printk 1304 drivers/net/hippi/rrunner.c printk("%02x ", (unsigned char)rrpriv->tx_ring[cons].size); printk 1306 drivers/net/hippi/rrunner.c printk("\n"); printk 1309 drivers/net/hippi/rrunner.c printk("dumping TX ring info:\n"); printk 1311 drivers/net/hippi/rrunner.c printk("mode 0x%x, size 0x%x, phys-addr %08Lx\n", printk 1339 drivers/net/hippi/rrunner.c printk("%s: NIC already halted\n", dev->name); printk 1396 drivers/net/hippi/rrunner.c printk("error codes Fail1 %02x, Fail2 %02x\n", printk 1404 drivers/net/hippi/rrunner.c printk("incoming skb too small - reallocating\n"); printk 1475 drivers/net/hippi/rrunner.c printk("%s: Trying to load firmware to a running NIC.\n", printk 1515 drivers/net/hippi/rrunner.c printk("%s: eptr is invalid\n", dev->name); printk 1523 drivers/net/hippi/rrunner.c printk("%s: invalid firmware format (%i)\n", printk 1531 drivers/net/hippi/rrunner.c printk("%s: nr_seg %i\n", dev->name, nr_seg); printk 1543 drivers/net/hippi/rrunner.c printk("%s: segment %i, sram address %06x, length %04x, segptr %06x\n", printk 1585 drivers/net/hippi/rrunner.c printk("%s: Firmware already running\n", dev->name); printk 1594 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Error reading EEPROM\n", printk 1622 drivers/net/hippi/rrunner.c printk("%s: Firmware already running\n", dev->name); printk 1627 drivers/net/hippi/rrunner.c printk("%s: Updating EEPROM firmware\n", dev->name); printk 1632 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Error writing EEPROM\n", printk 1639 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Error reading back EEPROM " printk 1644 drivers/net/hippi/rrunner.c printk(KERN_ERR "%s: Error verifying EEPROM image\n", printk 421 drivers/net/plip/plip.c printk(KERN_WARNING "%s: transmit timeout(%d,%02x)\n", printk 440 drivers/net/plip/plip.c printk(KERN_WARNING "%s: receive timeout(%d,%02x)\n", printk 594 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: receive start\n", dev->name); printk 626 drivers/net/plip/plip.c printk(KERN_WARNING "%s: bogus packet size %d.\n", dev->name, rcv->length.h); printk 632 drivers/net/plip/plip.c printk(KERN_ERR "%s: Memory squeeze.\n", dev->name); printk 663 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: checksum error\n", dev->name); printk 677 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: receive end\n", dev->name); printk 758 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: send skb lost\n", dev->name); printk 799 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: send start\n", dev->name); printk 856 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: send end\n", dev->name); printk 894 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: reset interface.\n", dev->name); printk 927 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name); printk 933 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: interrupt.\n", dev->name); printk 954 drivers/net/plip/plip.c printk(KERN_ERR "%s: receive interrupt in error state\n", dev->name); printk 980 drivers/net/plip/plip.c printk(KERN_WARNING "%s: packet too big, %d.\n", dev->name, (int)skb->len); printk 986 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: send request\n", dev->name); printk 1188 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: why am I being woken up?\n", dev->name); printk 1191 drivers/net/plip/plip.c printk(KERN_DEBUG "%s: I'm broken.\n", dev->name); printk 1265 drivers/net/plip/plip.c printk(KERN_ERR "plip: too many devices\n"); printk 1279 drivers/net/plip/plip.c printk(KERN_INFO "plip: %s has no IRQ. Using IRQ-less mode," printk 1296 drivers/net/plip/plip.c printk(KERN_ERR "%s: parport_register failed\n", name); printk 1303 drivers/net/plip/plip.c printk(KERN_ERR "%s: network register failed\n", name); printk 1307 drivers/net/plip/plip.c printk(KERN_INFO "%s", version); printk 1309 drivers/net/plip/plip.c printk(KERN_INFO "%s: Parallel port at %#3lx, " printk 1313 drivers/net/plip/plip.c printk(KERN_INFO "%s: Parallel port at %#3lx, " printk 1388 drivers/net/plip/plip.c printk(KERN_INFO "plip: too many ports, %s ignored.\n", printk 1397 drivers/net/plip/plip.c printk(KERN_WARNING "warning: 'plip=0x%x' ignored\n", printk 1414 drivers/net/plip/plip.c printk(KERN_WARNING "plip: warning, ignoring `timid' since specific ports given.\n"); printk 1419 drivers/net/plip/plip.c printk (KERN_WARNING "plip: couldn't register driver\n"); printk 531 drivers/net/ppp/bsd_comp.c printk ("<9>ppp: lens_ptr(%d) > max\n", idx); printk 541 drivers/net/ppp/bsd_comp.c printk ("<9>ppp: dict_ptr(%d) > max\n", idx); printk 879 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: bad sequence # %d, expected %d\n", printk 941 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: bad CLEAR\n", db->unit); printk 955 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: bad code 0x%x oldcode=0x%x ", printk 957 drivers/net/ppp/bsd_comp.c printk("max_ent=0x%x explen=%d seqno=%d\n", printk 981 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: ran out of mru\n", db->unit); printk 983 drivers/net/ppp/bsd_comp.c printk(" len=%d, finchar=0x%x, codelen=%d, explen=%d\n", printk 1006 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: fell off end of chain ", db->unit); printk 1007 drivers/net/ppp/bsd_comp.c printk("0x%x at 0x%x by 0x%x, max_ent=0x%x\n", printk 1014 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: bad code chain 0x%x " printk 1018 drivers/net/ppp/bsd_comp.c printk("oldcode=0x%x cptr=0x%x codem1=0x%x\n", printk 1033 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n", printk 1121 drivers/net/ppp/bsd_comp.c printk("bsd_decomp%d: peer should have cleared dictionary on %d\n", printk 1158 drivers/net/ppp/bsd_comp.c printk(KERN_INFO "PPP BSD Compression module registered\n"); printk 394 drivers/net/ppp/ppp_async.c printk(KERN_ERR "PPP_async: error %d registering line disc.\n", printk 928 drivers/net/ppp/ppp_async.c printk(KERN_ERR "PPPasync: no memory (input pkt)\n"); printk 1019 drivers/net/ppp/ppp_async.c printk(KERN_ERR "failed to unregister PPP line discipline\n"); printk 229 drivers/net/ppp/ppp_deflate.c printk(KERN_ERR printk 421 drivers/net/ppp/ppp_deflate.c printk(KERN_DEBUG "z_decompress%d: short pkt (%d)\n", printk 430 drivers/net/ppp/ppp_deflate.c printk(KERN_DEBUG "z_decompress%d: bad seq # %d, expected %d\n", printk 463 drivers/net/ppp/ppp_deflate.c printk(KERN_DEBUG "z_decompress%d: inflate returned %d (%s)\n", printk 489 drivers/net/ppp/ppp_deflate.c printk(KERN_DEBUG "z_decompress%d: ran out of mru\n", printk 497 drivers/net/ppp/ppp_deflate.c printk(KERN_DEBUG "z_decompress%d: didn't get proto\n", printk 546 drivers/net/ppp/ppp_deflate.c printk(KERN_DEBUG "z_incomp%d: inflateIncomp returned %d (%s)\n", printk 266 drivers/net/ppp/ppp_mppe.c printk(KERN_WARNING "%s[%d]: unknown key length\n", debugstr, printk 277 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "%s[%d]: initialized with %d-bit %s mode\n", printk 280 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG printk 353 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_compress[%d]: osize too small! " printk 371 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_compress[%d]: ccount %d\n", state->unit, printk 380 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_compress[%d]: rekeying\n", printk 443 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG printk 456 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_decompress[%d]: osize too small! " printk 465 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_decompress[%d]: ccount %d\n", printk 470 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG printk 477 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_decompress[%d]: FLUSHED bit not set in " printk 483 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG "mppe_decompress[%d]: FLUSHED bit not set on " printk 616 drivers/net/ppp/ppp_mppe.c printk(KERN_DEBUG printk 674 drivers/net/ppp/ppp_mppe.c printk(KERN_INFO "PPP MPPE Compression module registered\n"); printk 111 drivers/net/ppp/ppp_synctty.c printk(KERN_DEBUG "ppp_synctty: %s, count = %d\n", name, count); printk 387 drivers/net/ppp/ppp_synctty.c printk(KERN_ERR "PPP_sync: error %d registering line disc.\n", printk 682 drivers/net/ppp/ppp_synctty.c printk(KERN_ERR "PPPsync: no memory (input pkt)\n"); printk 730 drivers/net/ppp/ppp_synctty.c printk(KERN_ERR "failed to unregister Sync PPP line discipline\n"); printk 163 drivers/net/rionet.c printk(KERN_INFO "%s: queued skb len %8.8x\n", DRV_NAME, printk 186 drivers/net/rionet.c printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n", printk 235 drivers/net/rionet.c printk(KERN_INFO "%s: doorbell sid %4.4x tid %4.4x info %4.4x", printk 260 drivers/net/rionet.c printk(KERN_WARNING "%s: unhandled doorbell\n", printk 272 drivers/net/rionet.c printk(KERN_INFO "%s: inbound message event, mbox %d slot %d\n", printk 289 drivers/net/rionet.c printk(KERN_INFO printk 317 drivers/net/rionet.c printk(KERN_INFO "%s: open\n", DRV_NAME); printk 374 drivers/net/rionet.c printk(KERN_INFO "%s: close %s\n", DRV_NAME, ndev->name); printk 531 drivers/net/rionet.c printk(KERN_INFO "%s: %s %s Version %s, MAC %pM, %s\n", printk 566 drivers/net/rionet.c printk(KERN_ERR printk 581 drivers/net/rionet.c printk(KERN_ERR "%s: failed to setup netdev (rc=%d)\n", printk 187 drivers/net/sb1000.c printk(KERN_NOTICE "%s: sb1000 at (%#3.3lx,%#3.3lx), " printk 200 drivers/net/sb1000.c printk(KERN_NOTICE "%s", version); printk 270 drivers/net/sb1000.c printk(KERN_WARNING "%s: card_wait_for_busy_clear timeout\n", printk 294 drivers/net/sb1000.c printk(KERN_WARNING "%s: card_wait_for_ready timeout\n", printk 332 drivers/net/sb1000.c printk(KERN_DEBUG "%s: card_send_command " printk 339 drivers/net/sb1000.c printk(KERN_DEBUG "%s: card_send_command " printk 366 drivers/net/sb1000.c printk(KERN_WARNING "%s: sb1000_wait_for_ready timeout\n", printk 374 drivers/net/sb1000.c printk(KERN_WARNING "%s: sb1000_wait_for_ready timeout\n", printk 392 drivers/net/sb1000.c printk(KERN_WARNING "%s: sb1000_wait_for_ready_clear timeout\n", printk 400 drivers/net/sb1000.c printk(KERN_WARNING "%s: sb1000_wait_for_ready_clear timeout\n", printk 420 drivers/net/sb1000.c printk(KERN_DEBUG "%s: sb1000_send_command out: %02x%02x%02x%02x" printk 601 drivers/net/sb1000.c printk(KERN_ERR "%s: frequency chosen (%d kHz) is not in the range " printk 712 drivers/net/sb1000.c printk(KERN_DEBUG "%s: status: %02x %02x\n", name, st[0], st[1]); printk 714 drivers/net/sb1000.c printk(KERN_DEBUG "%s: length: %d protocol: %d from: %d.%d.%d.%d:%d " printk 722 drivers/net/sb1000.c printk(KERN_DEBUG "%s: %s", name, i ? " " : "buffer:"); printk 724 drivers/net/sb1000.c printk(" %02x", buffer[k]); printk 725 drivers/net/sb1000.c printk("\n"); printk 763 drivers/net/sb1000.c printk("cm0: received: %02x %02x\n", st[0], st[1]); printk 793 drivers/net/sb1000.c printk(KERN_WARNING "%s: missing frame(s): got %02x %02x " printk 808 drivers/net/sb1000.c printk("cm0: IP identification: %02x%02x fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]); printk 812 drivers/net/sb1000.c printk(KERN_WARNING "%s: new datagram header skip error: " printk 823 drivers/net/sb1000.c printk(KERN_WARNING "%s: datagram length (%d) greater " printk 834 drivers/net/sb1000.c printk(KERN_WARNING "%s: can't allocate %d bytes long " printk 851 drivers/net/sb1000.c printk(KERN_WARNING "%s: cont datagram header skip error: " printk 880 drivers/net/sb1000.c printk(KERN_WARNING "%s: frame error: got %02x %02x\n", printk 971 drivers/net/sb1000.c printk(KERN_DEBUG "%s: Opening, IRQ %d\n", name, dev->irq); printk 981 drivers/net/sb1000.c printk(KERN_WARNING "%s: found firmware version %x.%02x " printk 1078 drivers/net/sb1000.c printk(KERN_WARNING "%s: trying to transmit!!!\n", dev->name); printk 1110 drivers/net/sb1000.c printk(KERN_DEBUG "%s: entering interrupt\n", dev->name); printk 1147 drivers/net/sb1000.c printk(KERN_DEBUG "%s: Shutting down sb1000.\n", dev->name); printk 709 drivers/net/slip/slhc.c printk(KERN_DEBUG "Called IP function on non IP-system: slhc_toss"); printk 715 drivers/net/slip/slhc.c printk(KERN_DEBUG "Called IP function on non IP-system: slhc_uncompress"); printk 722 drivers/net/slip/slhc.c printk(KERN_DEBUG "Called IP function on non IP-system: slhc_compress"); printk 729 drivers/net/slip/slhc.c printk(KERN_DEBUG "Called IP function on non IP-system: slhc_remember"); printk 736 drivers/net/slip/slhc.c printk(KERN_DEBUG "Called IP function on non IP-system: slhc_free"); printk 741 drivers/net/slip/slhc.c printk(KERN_DEBUG "Called IP function on non IP-system: slhc_init"); printk 251 drivers/net/slip/slip.c printk(KERN_WARNING "%s: unable to grow slip buffers, MTU change cancelled.\n", printk 332 drivers/net/slip/slip.c printk(KERN_WARNING "%s: compressed packet ignored\n", dev->name); printk 349 drivers/net/slip/slip.c printk(KERN_INFO "%s: header compression turned on\n", dev->name); printk 362 drivers/net/slip/slip.c printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", dev->name); printk 381 drivers/net/slip/slip.c printk(KERN_WARNING "%s: truncating oversized transmit packet!\n", sl->dev->name); printk 485 drivers/net/slip/slip.c printk(KERN_WARNING "%s: transmit timed out, %s?\n", printk 508 drivers/net/slip/slip.c printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name); printk 1286 drivers/net/slip/slip.c printk(KERN_INFO "SLIP: version %s (dynamic channels, max=%d)" printk 1293 drivers/net/slip/slip.c printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n"); printk 1296 drivers/net/slip/slip.c printk(KERN_INFO "SLIP linefill/keepalive option.\n"); printk 1307 drivers/net/slip/slip.c printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status); printk 1356 drivers/net/slip/slip.c printk(KERN_ERR "%s: tty discipline still running\n", printk 1368 drivers/net/slip/slip.c printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i); printk 1426 drivers/net/slip/slip.c printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name); printk 1179 drivers/net/sungem_phy.c printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n", printk 92 drivers/net/tun.c printk(level fmt, ##args); \ printk 103 drivers/net/tun.c printk(level fmt, ##args); \ printk 910 drivers/net/usb/catc.c printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n", printk 385 drivers/net/usb/dm9601.c printk(KERN_ERR "Error reading MAC address\n"); printk 396 drivers/net/usb/dm9601.c printk(KERN_WARNING printk 1451 drivers/net/usb/smsc75xx.c printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); printk 1254 drivers/net/usb/smsc95xx.c printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); printk 232 drivers/net/wan/c101.c printk(KERN_DEBUG "MSCI1: ST: %02x %02x %02x %02x\n", printk 468 drivers/net/wan/cosa.c printk(KERN_DEBUG "probe at 0x%x failed.\n", base); printk 489 drivers/net/wan/cosa.c printk(KERN_DEBUG "changing name at 0x%x failed.\n", base); printk 1390 drivers/net/wan/cosa.c if ((i=get_wait_data(cosa)) != 'w') { printk("dnld: 0x%04x\n",i); return -2;} printk 1419 drivers/net/wan/cosa.c printk(KERN_DEBUG "cosa%d: download completed.\n", cosa->num); printk 1445 drivers/net/wan/cosa.c printk(KERN_DEBUG "cosa%d: microcode started\n", cosa->num); printk 1495 drivers/net/wan/cosa.c printk(KERN_DEBUG "cosa%d: readmem completed.\n", cosa->num); printk 1691 drivers/net/wan/cosa.c printk(KERN_DEBUG "%s: Forcing TX " printk 517 drivers/net/wan/dlci.c printk("%s.\n", version); printk 517 drivers/net/wan/farsync.c printk(KERN_DEBUG pr_fmt(fmt), ##args); \ printk 523 drivers/net/wan/farsync.c printk(KERN_DEBUG pr_fmt(fmt), ##args); \ printk 1721 drivers/net/wan/farsync.c printk("Setting TE1 data\n"); printk 1722 drivers/net/wan/farsync.c printk("Line Speed = %d\n", info->lineSpeed); printk 1723 drivers/net/wan/farsync.c printk("Start slot = %d\n", info->startingSlot); printk 1724 drivers/net/wan/farsync.c printk("Clock source = %d\n", info->clockSource); printk 1725 drivers/net/wan/farsync.c printk("Framing = %d\n", my_framing); printk 1726 drivers/net/wan/farsync.c printk("Structure = %d\n", info->structure); printk 1727 drivers/net/wan/farsync.c printk("interface = %d\n", info->interface); printk 1728 drivers/net/wan/farsync.c printk("Coding = %d\n", info->coding); printk 1729 drivers/net/wan/farsync.c printk("Line build out = %d\n", info->lineBuildOut); printk 1730 drivers/net/wan/farsync.c printk("Equaliser = %d\n", info->equalizer); printk 1731 drivers/net/wan/farsync.c printk("Transparent mode = %d\n", printk 1733 drivers/net/wan/farsync.c printk("Loop mode = %d\n", info->loopMode); printk 1734 drivers/net/wan/farsync.c printk("Range = %d\n", info->range); printk 1735 drivers/net/wan/farsync.c printk("Tx Buffer mode = %d\n", info->txBufferMode); printk 1736 drivers/net/wan/farsync.c printk("Rx Buffer mode = %d\n", info->rxBufferMode); printk 1737 drivers/net/wan/farsync.c printk("LOS Threshold = %d\n", info->losThreshold); printk 1738 drivers/net/wan/farsync.c printk("Idle Code = %d\n", info->idleCode); printk 133 drivers/net/wan/hd64570.c printk(KERN_DEBUG "%s: sca_set_carrier on\n", printk 139 drivers/net/wan/hd64570.c printk(KERN_DEBUG "%s: sca_set_carrier off\n", printk 276 drivers/net/wan/hd64570.c printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len); printk 574 drivers/net/wan/hd64570.c printk(KERN_DEBUG "RX ring: CDA=%u EDA=%u DSR=%02X in=%u %sactive", printk 583 drivers/net/wan/hd64570.c printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " printk 594 drivers/net/wan/hd64570.c printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x, ST: %02x %02x %02x %02x," printk 607 drivers/net/wan/hd64570.c printk(KERN_DEBUG "ISR: %02x %02x %02x\n", sca_in(ISR0, card), printk 632 drivers/net/wan/hd64570.c printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len); printk 111 drivers/net/wan/hd64572.c printk(KERN_DEBUG "%s: sca_set_carrier on\n", printk 117 drivers/net/wan/hd64572.c printk(KERN_DEBUG "%s: sca_set_carrier off\n", printk 219 drivers/net/wan/hd64572.c printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len); printk 522 drivers/net/wan/hd64572.c printk(KERN_DEBUG "RX ring: CDA=%u EDA=%u DSR=%02X in=%u %sactive", printk 531 drivers/net/wan/hd64572.c printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " printk 542 drivers/net/wan/hd64572.c printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x," printk 556 drivers/net/wan/hd64572.c printk(KERN_DEBUG "ILAR: %02x ISR: %08x %08x\n", sca_in(ILAR, card), printk 575 drivers/net/wan/hd64572.c printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len); printk 108 drivers/net/wan/hdlc.c printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n", printk 143 drivers/net/wan/hdlc.c printk(KERN_DEBUG "%s: hdlc_open() carrier %i open %i\n", dev->name, printk 177 drivers/net/wan/hdlc.c printk(KERN_DEBUG "%s: hdlc_close() carrier %i open %i\n", dev->name, printk 78 drivers/net/wan/hdlc_cisco.c printk(KERN_DEBUG "%s: cisco_hard_header called\n", dev->name); printk 206 drivers/net/wan/hdlc_fr.c printk(KERN_DEBUG "add_pvc: allocated pvc %p, frad %p\n", pvc, dev); printk 253 drivers/net/wan/hdlc_fr.c printk(KERN_DEBUG "freeing unused pvc: %p\n", pvc); printk 904 drivers/net/wan/hdlc_fr.c printk(KERN_DEBUG "%s: DLCI %d FECN O%s\n", frad->name, printk 912 drivers/net/wan/hdlc_fr.c printk(KERN_DEBUG "%s: DLCI %d BECN O%s\n", frad->name, printk 992 drivers/net/wan/hdlc_fr.c printk(KERN_DEBUG "fr_start\n"); printk 1017 drivers/net/wan/hdlc_fr.c printk(KERN_DEBUG "fr_stop\n"); printk 170 drivers/net/wan/hdlc_ppp.c printk(KERN_DEBUG "%s: ppp_hard_header() called\n", dev->name); printk 246 drivers/net/wan/hdlc_ppp.c printk(KERN_DEBUG "%s: TX %s [%s id 0x%X]%s\n", dev->name, printk 313 drivers/net/wan/hdlc_ppp.c printk(KERN_DEBUG "%s: %s ppp_cp_event(%s) %s ...\n", dev->name, printk 366 drivers/net/wan/hdlc_ppp.c printk(KERN_DEBUG "%s: %s ppp_cp_event(%s) ... %s\n", dev->name, printk 481 drivers/net/wan/hdlc_ppp.c printk(KERN_DEBUG "%s: RX %s %s\n", dev->name, proto_name(pid), printk 559 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: %s(%i)", dev->name, func, len); printk 563 drivers/net/wan/ixp4xx_hss.c printk("%s%02X", !(i % 4) ? " " : "", data[i]); printk 565 drivers/net/wan/ixp4xx_hss.c printk("\n"); printk 573 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n", printk 645 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name); printk 660 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name); printk 674 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_poll" printk 682 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_poll" printk 690 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n", printk 699 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X" printk 781 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n"); printk 794 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n"); printk 808 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n", printk 819 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit" printk 837 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name); printk 893 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name); printk 899 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n", printk 907 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name); printk 951 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "%s: unable to request hardware queues\n", printk 1148 drivers/net/wan/ixp4xx_hss.c printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i); printk 113 drivers/net/wan/lapbether.c printk(KERN_DEBUG "lapbether: lapb_data_received err - %d\n", err); printk 417 drivers/net/wan/lapbether.c printk(banner); printk 22 drivers/net/wan/lmc/lmc_debug.c printk(KERN_DEBUG "lmc: Printing 240 chars... out of: %d\n", iLen); printk 26 drivers/net/wan/lmc/lmc_debug.c printk(KERN_DEBUG "lmc: Printing %d chars\n", iLen); printk 37 drivers/net/wan/lmc/lmc_debug.c printk(str); printk 45 drivers/net/wan/lmc/lmc_debug.c printk(str); printk 70 drivers/net/wan/lmc/lmc_debug.c printk("%s: * %s\n", dev->name, msg); printk 75 drivers/net/wan/lmc/lmc_debug.c printk("%s: %s\n", dev->name, msg); printk 307 drivers/net/wan/lmc/lmc_main.c printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16)); printk 309 drivers/net/wan/lmc/lmc_main.c printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16)); printk 500 drivers/net/wan/lmc/lmc_main.c printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data); printk 557 drivers/net/wan/lmc/lmc_main.c printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout); printk 568 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]); printk 582 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name); printk 585 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name); printk 588 drivers/net/wan/lmc/lmc_main.c printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos); printk 642 drivers/net/wan/lmc/lmc_main.c printk("LMC: Corrupt net_device struct, breaking out\n"); printk 717 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name); printk 730 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name); printk 820 drivers/net/wan/lmc/lmc_main.c printk(KERN_ERR "lmc: pci enable failed: %d\n", err); printk 826 drivers/net/wan/lmc/lmc_main.c printk(KERN_ERR "lmc: pci_request_region failed\n"); printk 839 drivers/net/wan/lmc/lmc_main.c printk(KERN_ERR "lmc:alloc_netdev for device failed\n"); printk 870 drivers/net/wan/lmc/lmc_main.c printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name, printk 875 drivers/net/wan/lmc/lmc_main.c printk(KERN_ERR "%s: register_netdev failed.\n", dev->name); printk 894 drivers/net/wan/lmc/lmc_main.c printk(KERN_INFO "%s: LMC HSSI\n", dev->name); printk 899 drivers/net/wan/lmc/lmc_main.c printk(KERN_INFO "%s: LMC DS3\n", dev->name); printk 904 drivers/net/wan/lmc/lmc_main.c printk(KERN_INFO "%s: LMC SSI\n", dev->name); printk 909 drivers/net/wan/lmc/lmc_main.c printk(KERN_INFO "%s: LMC T1\n", dev->name); printk 914 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name); printk 940 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI" printk 970 drivers/net/wan/lmc/lmc_main.c printk(KERN_DEBUG "%s: removing...\n", dev->name); printk 1004 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq); printk 1329 drivers/net/wan/lmc/lmc_main.c printk ("%s: out of sync pointer\n", dev->name); printk 1352 drivers/net/wan/lmc/lmc_main.c printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr); printk 1356 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name); printk 1359 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name); printk 1362 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name); printk 1365 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name); printk 1543 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name); printk 1821 drivers/net/wan/lmc/lmc_main.c printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name); printk 2057 drivers/net/wan/lmc/lmc_main.c printk("%s: Xmitter busy|\n", dev->name); printk 233 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS); printk 241 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS); printk 452 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Red Alarm - Loss of Signal or Loss of Framing\n", sc->name); printk 475 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: AIS Alarm or XBit Error\n", sc->name); printk 476 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Remote end has loss of signal or framing\n", sc->name); printk 492 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Blue Alarm - Receiving all 1's\n", sc->name); printk 621 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS); printk 629 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS); printk 719 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name); printk 726 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Clock Returned\n", sc->name); printk 745 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: DSR not asserted\n", sc->name); printk 751 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: DSR now asserted\n", sc->name); printk 769 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": asserting DTR and RTS\n", LMC_PRINTF_ARGS); printk 774 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": deasserting DTR and RTS\n", LMC_PRINTF_ARGS); printk 840 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": speed %u, %d %d %d %d %d\n", printk 1039 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Receive AIS/Blue Alarm. Far end in RED alarm\n", sc->name); printk 1046 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: End AIS/Blue Alarm\n", sc->name); printk 1065 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Receive Yellow AIS Alarm\n", sc->name); printk 1072 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: End of Yellow AIS Alarm\n", sc->name); printk 1085 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Local Red Alarm: Loss of Framing\n", sc->name); printk 1093 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: End Red Alarm (LOF)\n", sc->name); printk 1103 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: Local Red Alarm: Loss of Signal\n", sc->name); printk 1111 drivers/net/wan/lmc/lmc_media.c printk(KERN_WARNING "%s: End Red Alarm (LOS)\n", sc->name); printk 1138 drivers/net/wan/lmc/lmc_media.c printk(KERN_INFO "%s: In T1 Mode\n", sc->name); printk 1143 drivers/net/wan/lmc/lmc_media.c printk(KERN_INFO "%s: In E1 Mode\n", sc->name); printk 1188 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS); printk 1196 drivers/net/wan/lmc/lmc_media.c printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS); printk 80 drivers/net/wan/lmc/lmc_proto.c printk(KERN_WARNING "%s: HDLC open failed: %d\n", printk 112 drivers/net/wan/lmc/lmc_proto.c printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name); printk 296 drivers/net/wan/sdla.c printk("%s: SCC bad\n", dev->name); printk 1625 drivers/net/wan/sdla.c printk("%s.\n", version); printk 216 drivers/net/wan/wanxl.c printk(KERN_DEBUG "%s RX(%i):", dev->name, printk 281 drivers/net/wan/wanxl.c printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); printk 289 drivers/net/wan/wanxl.c printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len); printk 306 drivers/net/wan/wanxl.c printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); printk 620 drivers/net/wan/wanxl.c printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory" printk 210 drivers/net/wan/x25_asy.c printk(KERN_DEBUG "x25_asy: data received err - %d\n", err); printk 226 drivers/net/wan/x25_asy.c printk(KERN_DEBUG "%s: truncating oversized transmit packet!\n", printk 1051 drivers/net/wan/z85230.c printk("Opening sync interface for TX-DMA\n"); printk 1778 drivers/net/wan/z85230.c printk(banner); printk 132 drivers/net/wimax/i2400m/control.c printk(KERN_WARNING "W: tlv type 0x%x mismatched because of " printk 340 drivers/net/wimax/i2400m/fw.c printk(KERN_ERR "%s: can't recognize " printk 1323 drivers/net/wimax/i2400m/rx.c printk(KERN_ERR "%s... (only first 64 bytes " printk 149 drivers/net/wireless/admtek/adm8211.c printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n", printk 167 drivers/net/wireless/admtek/adm8211.c printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n", printk 172 drivers/net/wireless/admtek/adm8211.c printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n", printk 179 drivers/net/wireless/admtek/adm8211.c printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n", printk 207 drivers/net/wireless/admtek/adm8211.c printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n", printk 228 drivers/net/wireless/admtek/adm8211.c printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n", printk 234 drivers/net/wireless/admtek/adm8211.c printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d " printk 1792 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n", printk 1802 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Too short PCI resources\n", printk 1811 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n", printk 1818 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n", printk 1825 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): No suitable DMA available\n", printk 1834 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n", printk 1853 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Cannot map device memory\n", printk 1864 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n", printk 1874 drivers/net/wireless/admtek/adm8211.c printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n", printk 1907 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n", printk 1920 drivers/net/wireless/admtek/adm8211.c printk(KERN_ERR "%s (adm8211): Cannot register device\n", printk 879 drivers/net/wireless/ath/ath10k/ahb.c printk(KERN_ERR "failed to register ath10k ahb driver: %d\n", printk 3769 drivers/net/wireless/ath/ath10k/pci.c printk(KERN_ERR "failed to register ath10k pci driver: %d\n", printk 3774 drivers/net/wireless/ath/ath10k/pci.c printk(KERN_ERR "ahb init failed: %d\n", ret); printk 3197 drivers/net/wireless/ath/ath5k/base.c printk("%s" pr_fmt("%s: %pV"), printk 3200 drivers/net/wireless/ath/ath5k/base.c printk("%s" pr_fmt("%pV"), level, &vaf); printk 1042 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG "Band not supported: %d\n", printk 1046 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname, printk 1048 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG " channels:\n"); printk 1050 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG " %3d %d %.4x %.4x\n", printk 1056 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG " rates:\n"); printk 1058 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n", printk 1073 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n", printk 1092 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG "rxdp %x, rxlink %p\n", printk 1118 drivers/net/wireless/ath/ath5k/debug.c printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x " printk 50 drivers/net/wireless/ath/ath6kl/debug.c printk("%sath6kl: %pV", level, &vaf); printk 83 drivers/net/wireless/ath/main.c printk("%sath: %s: %pV", printk 87 drivers/net/wireless/ath/main.c printk("%sath: %pV", level, &vaf); printk 501 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: regdomain 0x%0x " printk 558 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG printk 567 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: EEPROM indicates we " printk 573 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG printk 678 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n"); printk 692 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd); printk 704 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: EEPROM indicates default " printk 712 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: doing EEPROM country->regdmn " printk 716 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG printk 723 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: country maps to " printk 732 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: " printk 748 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n", printk 750 drivers/net/wireless/ath/regd.c printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n", printk 59 drivers/net/wireless/ath/wcn36xx/wcn36xx.h printk(KERN_ERR pr_fmt("ERROR " fmt), ##arg) printk 62 drivers/net/wireless/ath/wcn36xx/wcn36xx.h printk(KERN_WARNING pr_fmt("WARNING " fmt), ##arg) printk 65 drivers/net/wireless/ath/wcn36xx/wcn36xx.h printk(KERN_INFO pr_fmt(fmt), ##arg) printk 69 drivers/net/wireless/ath/wcn36xx/wcn36xx.h printk(KERN_DEBUG pr_fmt(fmt), ##arg); \ printk 90 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \ printk 96 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \ printk 2202 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_ERR DRIVER_NAME ": could not register" printk 2379 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n", printk 2574 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n"); printk 2581 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_ERR DRIVER_NAME printk 2592 drivers/net/wireless/atmel/at76c50x-usb.c printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n"); printk 1190 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); printk 1210 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); printk 1241 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name); printk 1257 drivers/net/wireless/atmel/atmel.c printk(KERN_INFO "%s: Generic_irq received.\n", dev->name); printk 1348 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name); printk 1511 drivers/net/wireless/atmel/atmel.c printk(KERN_ERR "atmel: Couldn't get name!\n"); printk 1587 drivers/net/wireless/atmel/atmel.c printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc); printk 1608 drivers/net/wireless/atmel/atmel.c printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); printk 1610 drivers/net/wireless/atmel/atmel.c printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n", printk 3603 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name); printk 3608 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: card missing.\n", priv->dev->name); printk 3631 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MAC failed to initialise.\n", printk 3639 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name); printk 3644 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name); printk 3696 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MAC failed to boot MAC address reader.\n", dev->name); printk 3734 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: *** Invalid MAC address. UPGRADE Firmware ****\n", dev->name); printk 3887 drivers/net/wireless/atmel/atmel.c printk(KERN_INFO printk 3890 drivers/net/wireless/atmel/atmel.c printk(KERN_INFO printk 3897 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT printk 3925 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT printk 3996 drivers/net/wireless/atmel/atmel.c printk(KERN_INFO "%s: cannot turn the radio on.\n", printk 4062 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name); printk 4116 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); printk 4131 drivers/net/wireless/atmel/atmel.c printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); printk 58 drivers/net/wireless/broadcom/b43/debugfs.c printk(KERN_ERR "b43: fappend overflow\n"); \ printk 397 drivers/net/wireless/broadcom/b43/main.c printk(KERN_INFO "b43-%s: %pV", printk 418 drivers/net/wireless/broadcom/b43/main.c printk(KERN_ERR "b43-%s ERROR: %pV", printk 439 drivers/net/wireless/broadcom/b43/main.c printk(KERN_WARNING "b43-%s warning: %pV", printk 458 drivers/net/wireless/broadcom/b43/main.c printk(KERN_DEBUG "b43-%s debug: %pV", printk 1109 drivers/net/wireless/broadcom/b43/main.c printk(KERN_DEBUG "Key slot %02u: %s", printk 1114 drivers/net/wireless/broadcom/b43/main.c printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); printk 1119 drivers/net/wireless/broadcom/b43/main.c printk(" Algo: %04X/%02X", algo, key->algorithm); printk 1123 drivers/net/wireless/broadcom/b43/main.c printk(" TKIP: "); printk 1127 drivers/net/wireless/broadcom/b43/main.c printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); printk 1136 drivers/net/wireless/broadcom/b43/main.c printk(" MAC: %pM", mac); printk 1138 drivers/net/wireless/broadcom/b43/main.c printk(" DEFAULT KEY"); printk 1139 drivers/net/wireless/broadcom/b43/main.c printk("\n"); printk 1930 drivers/net/wireless/broadcom/b43/main.c printk(KERN_INFO); printk 1931 drivers/net/wireless/broadcom/b43/main.c printk("r%02u: 0x%04X ", i, tmp); printk 1934 drivers/net/wireless/broadcom/b43/main.c printk("\n"); printk 1938 drivers/net/wireless/broadcom/b43/main.c printk("\n"); printk 5805 drivers/net/wireless/broadcom/b43/main.c printk(KERN_INFO "Broadcom 43xx driver loaded " printk 339 drivers/net/wireless/broadcom/b43legacy/b43legacy.h printk(KERN_INFO PFX "Test (%s) failed\n", \ printk 61 drivers/net/wireless/broadcom/b43legacy/debugfs.c printk(KERN_ERR "b43legacy: fappend overflow\n"); \ printk 179 drivers/net/wireless/broadcom/b43legacy/main.c printk(KERN_INFO "b43legacy-%s: %pV", printk 198 drivers/net/wireless/broadcom/b43legacy/main.c printk(KERN_ERR "b43legacy-%s ERROR: %pV", printk 217 drivers/net/wireless/broadcom/b43legacy/main.c printk(KERN_WARNING "b43legacy-%s warning: %pV", printk 234 drivers/net/wireless/broadcom/b43legacy/main.c printk(KERN_DEBUG "b43legacy-%s debug: %pV", printk 4002 drivers/net/wireless/broadcom/b43legacy/main.c printk(KERN_INFO "Broadcom 43xx-legacy driver loaded " printk 68 drivers/net/wireless/broadcom/b43legacy/radio.c printk(KERN_INFO "b43legacy: Channel %d is out of range\n", printk 1273 drivers/net/wireless/cisco/airo.c printk(type DRV_NAME "(%s): " fmt "\n", name, ##args) printk 204 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_DEBUG "ipw2100: %c %s ", \ printk 206 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(message); \ printk 528 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " printk 537 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 590 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " printk 669 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_DEBUG "%s\n", printk 809 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n", printk 1041 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n", printk 1053 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 1248 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 1308 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 1501 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 1528 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": " printk 1567 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 1606 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 1613 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 1748 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 1759 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 1770 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 1783 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 1792 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_INFO "%s: Radio is disabled by RF switch.\n", printk 1811 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", printk 1820 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": " printk 1868 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n", printk 2510 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": " printk 2841 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n", printk 2855 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n", printk 2912 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " printk 2949 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " printk 2990 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": " printk 3234 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 3252 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 3355 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n"); printk 3446 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": " printk 4016 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", printk 4044 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_INFO "%s: Resetting on mode change.\n", priv->net_dev->name); printk 4443 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 4754 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 5333 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 5421 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 5458 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 6171 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6180 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6189 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6201 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6209 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6222 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6236 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6246 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6254 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_INFO DRV_NAME printk 6273 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6293 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME printk 6445 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR "%s: pci_enable_device failed on resume\n", printk 6567 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION); printk 6568 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); printk 8354 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " printk 8397 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": " printk 8483 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": " printk 8595 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n", printk 8613 drivers/net/wireless/intel/ipw2x00/ipw2100.c printk(KERN_ERR DRV_NAME printk 97 drivers/net/wireless/intel/ipw2x00/ipw2100.h #define IPW_DEBUG_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a) printk 98 drivers/net/wireless/intel/ipw2x00/ipw2100.h #define IPW_DEBUG_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a) printk 265 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_DEBUG "%s\n", line); printk 1203 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO DRV_NAME printk 5191 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_CRIT "%s: Can not allocate SKB buffers.\n", printk 7670 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_ERR "Unknown security level %d\n", printk 8269 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_CRIT "Queue not allocated!\n"); printk 8541 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO DRV_NAME printk 8552 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO DRV_NAME printk 10199 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_ERR "Unknown security level %d\n", printk 10245 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO "Trying to reallocate for %d bytes\n", printk 10253 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO "Adding frag %d %d...\n", printk 10422 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO "%s: Setting MAC to %pM\n", printk 11639 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n"); printk 11748 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO DRV_NAME ": Detected geography %s (%d 802.11bg " printk 11863 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO "%s: Going into suspend...\n", dev->name); printk 11887 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO "%s: Coming out of suspend...\n", dev->name); printk 11892 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_ERR "%s: pci_enable_device failed on resume\n", printk 11948 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); printk 11949 drivers/net/wireless/intel/ipw2x00/ipw2200.c printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); printk 1385 drivers/net/wireless/intel/ipw2x00/ipw2200.h printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ printk 1391 drivers/net/wireless/intel/ipw2x00/ipw2200.h printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ printk 1458 drivers/net/wireless/intel/ipw2x00/ipw2200.h #define IPW_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a) printk 1459 drivers/net/wireless/intel/ipw2x00/ipw2200.h #define IPW_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a) printk 63 drivers/net/wireless/intel/ipw2x00/libipw.h printk(KERN_DEBUG "libipw: %c %s " fmt, \ printk 107 drivers/net/wireless/intel/ipw2x00/libipw.h #define LIBIPW_ERROR(f, a...) printk(KERN_ERR "libipw: " f, ## a) printk 108 drivers/net/wireless/intel/ipw2x00/libipw.h #define LIBIPW_WARNING(f, a...) printk(KERN_WARNING "libipw: " f, ## a) printk 235 drivers/net/wireless/intel/ipw2x00/libipw_module.c printk(KERN_INFO DRV_NAME printk 274 drivers/net/wireless/intel/ipw2x00/libipw_module.c printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); printk 275 drivers/net/wireless/intel/ipw2x00/libipw_module.c printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); printk 171 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: Master mode not yet supported.\n", printk 200 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: unknown management frame " printk 210 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: management frame " printk 316 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed" printk 354 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_INFO "%s: SKB length < 10\n", dev->name); printk 366 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_INFO "%s: invalid SKB length %d\n", printk 468 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth " printk 597 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_WARNING "%s: host decrypted and " printk 714 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: RX: IEEE 802.1X frame\n", printk 726 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: dropped frame from " printk 777 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_DEBUG "%s: skb_clone failed for " printk 1272 drivers/net/wireless/intel/ipw2x00/libipw_rx.c printk(KERN_ERR printk 157 drivers/net/wireless/intel/ipw2x00/libipw_tx.c printk(KERN_INFO "%s: Encryption failed: len=%d.\n", printk 271 drivers/net/wireless/intel/ipw2x00/libipw_tx.c printk(KERN_WARNING "%s: No xmit handler.\n", ieee->dev->name); printk 276 drivers/net/wireless/intel/ipw2x00/libipw_tx.c printk(KERN_WARNING "%s: skb too small (%d).\n", printk 415 drivers/net/wireless/intel/ipw2x00/libipw_tx.c printk(KERN_WARNING "%s: Could not allocate TXB\n", printk 388 drivers/net/wireless/intel/ipw2x00/libipw_wx.c printk(KERN_WARNING "%s: could not initialize WEP: " printk 29 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d " printk 38 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", printk 45 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk("\n"); printk 49 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), printk 52 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG " A1=%pM", hdr->addr1); printk 53 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(" A2=%pM", hdr->addr2); printk 54 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(" A3=%pM", hdr->addr3); printk 56 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(" A4=%pM", hdr->addr4); printk 57 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk("\n"); printk 96 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: dropped management frame with header " printk 119 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: prism2_rx_80211 failed to " printk 231 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: expiring fragment cache entry " printk 315 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: could not invalidate fragment cache " printk 502 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: unknown management frame " printk 523 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: dropped unhandled" printk 664 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " printk 675 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: decryption failed (SA=%pM) res=%d\n", printk 703 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed" printk 810 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: WEP decryption failed (not set)" printk 825 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth " printk 903 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: RX: dropped data frame " printk 924 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: Rx cannot get skb from " printk 936 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_WARNING "%s: host decrypted and " printk 988 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: encryption configured, but RX " printk 998 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: dropped unencrypted RX data " printk 1026 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: dropped frame from " printk 1076 drivers/net/wireless/intersil/hostap/hostap_80211_rx.c printk(KERN_DEBUG "%s: skb_clone failed for " printk 28 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", printk 35 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", printk 42 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk("\n"); printk 46 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), printk 49 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG " A1=%pM", hdr->addr1); printk 50 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(" A2=%pM", hdr->addr2); printk 51 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(" A3=%pM", hdr->addr3); printk 53 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(" A4=%pM", hdr->addr4); printk 54 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk("\n"); printk 81 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " printk 95 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: prism2_tx: trying to use " printk 102 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: prism2_tx: trying to use " printk 282 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb " printk 335 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " printk 403 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " printk 422 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " printk 446 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: dropped frame to unauthorized " printk 507 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: dropped unencrypted TX data " printk 518 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: TX - encryption failed\n", printk 525 drivers/net/wireless/intersil/hostap/hostap_80211_tx.c printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " printk 108 drivers/net/wireless/intersil/hostap/hostap_ap.c printk("AP: could not remove STA %pM from hash table\n", printk 596 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_WARNING "%s: Warning: secondary station firmware " printk 650 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "%s: hostap_ap_tx_cb_auth received invalid " printk 719 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "%s: hostap_ap_tx_cb_assoc received invalid " printk 797 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_WARNING "hostap_init_data: ap == NULL\n"); printk 818 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_WARNING "%s: failed to register TX callback for " printk 831 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_WARNING "%s: failed to register TX callback for " printk 868 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "hostap_free_data: ap has not yet been " printk 1130 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "Failed to add STA proc data\n"); printk 1227 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_WARNING "AP could not initialize WEP: load module " printk 1719 drivers/net/wireless/intersil/hostap/hostap_ap.c printk("handle_deauth - too short payload (len=%d)\n", len); printk 1739 drivers/net/wireless/intersil/hostap/hostap_ap.c printk("%s: deauthentication from %pM, " printk 1761 drivers/net/wireless/intersil/hostap/hostap_ap.c printk("handle_disassoc - too short payload (len=%d)\n", len); printk 1781 drivers/net/wireless/intersil/hostap/hostap_ap.c printk("%s: disassociation from %pM, " printk 1799 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "Sending control::ACK for data::nullfunc\n"); printk 1999 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "handle_beacon - too short payload " printk 2093 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_INFO "prism2: kmalloc failed for AP " printk 2300 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "%s: schedule_packet_send: skb alloc " printk 2629 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_WARNING "prism2_hostapd: unknown cmd=%d\n", printk 2723 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "AP: drop packet to non-associated " printk 2961 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "%s: dropped received packet" printk 2977 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "Odd.. FromDS packet " printk 2997 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "%s: rejected received nullfunc frame" printk 3015 drivers/net/wireless/intersil/hostap/hostap_ap.c printk(KERN_DEBUG "%s: dropped received packet from %pM" printk 231 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" printk 239 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" printk 285 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected" printk 292 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", printk 306 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", printk 335 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n", printk 339 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n", printk 345 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n", printk 357 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n", printk 385 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s failed 1 (%d)\n", __func__, res); printk 388 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s: original COR %02x\n", __func__, old_cor); printk 393 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s failed 2 (%d)\n", __func__, res); printk 402 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s failed 3 (%d)\n", __func__, res); printk 410 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_DEBUG "%s failed 4 (%d)\n", __func__, res); printk 497 drivers/net/wireless/intersil/hostap/hostap_cs.c printk(KERN_ERR "GetNextTuple(): No matching " printk 32 drivers/net/wireless/intersil/hostap/hostap_download.c printk("%s: prism2_enable_aux_port - timeout - reg=0x%04x\n", printk 45 drivers/net/wireless/intersil/hostap/hostap_download.c printk("prism2_enable_aux_port: was not disabled!?\n"); printk 54 drivers/net/wireless/intersil/hostap/hostap_download.c printk("prism2_enable_aux_port: was not enabled!?\n"); printk 78 drivers/net/wireless/intersil/hostap/hostap_download.c printk("prism2_enable_aux_port(%d) timed out\n", printk 282 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: valid PDA not found\n", dev->name); printk 299 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Already downloading - aborting new " printk 311 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Could not initialize card for" printk 319 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Could not enable AUX port\n", printk 333 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Download command execution failed\n", printk 344 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: RAM download at 0x%08x " printk 356 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Download command execution failed\n", printk 368 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Disabling AUX port failed\n", printk 376 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Card configuration after RAM " printk 394 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: test Genesis mode with HCR 0x%02x\n", printk 406 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "Readback test succeeded, HCR 0x%02x\n", printk 410 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "Readback test failed, HCR 0x%02x write %4ph read %4ph\n", printk 444 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Already downloading - aborting new " printk 450 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_INFO "%s: Genesis mode downloading not supported " printk 458 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: failed to enable AUX port\n", printk 475 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Could not initiate genesis " printk 483 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Failed to set Genesis " printk 497 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: RAM download at 0x%08x " printk 508 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Failed to disable AUX port\n", printk 522 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Initialization after genesis mode " printk 530 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Initialization(2) after genesis mode " printk 565 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Flash download command execution " printk 571 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: flash download at 0x%08x " printk 581 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Flash write command execution " printk 603 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Already downloading - aborting new " printk 612 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Could not read download buffer " printk 617 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "Download buffer: %d bytes at 0x%04x:0x%04x\n", printk 630 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Could not initialize card for" printk 640 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Could not enable AUX port\n", printk 646 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: starting flash download\n", dev->name); printk 673 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Download command execution failed\n", printk 680 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: Disabling AUX port failed\n", printk 690 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_WARNING "%s: Card configuration after flash " printk 694 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_INFO "%s: Card initialized successfully after " printk 726 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "prism2_download: dl_cmd=%d start_addr=0x%08x " printk 786 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_INFO "%s: non-volatile downloading not enabled\n", printk 792 drivers/net/wireless/intersil/hostap/hostap_download.c printk(KERN_DEBUG "%s: unsupported download command %d\n", printk 221 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: removed pending cmd_queue entry " printk 230 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after " printk 259 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n", printk 273 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy " printk 281 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - " printk 324 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd called from interrupt " printk 330 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", printk 418 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? " printk 427 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n", printk 435 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd: command was not " printk 444 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: interrupt delivery does not " printk 456 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, " printk 499 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", printk 559 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - " printk 601 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - " printk 611 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n", printk 663 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Command completion event, but " printk 673 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Command completion event, but no " printk 693 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Invalid command completion type %d\n", printk 759 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n", printk 770 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n", printk 778 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error " printk 802 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI " printk 818 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed " printk 843 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: " printk 857 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, " printk 880 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI " printk 907 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - " printk 917 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE " printk 973 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n", printk 983 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: fid allocate, len=%d - timeout\n", dev->name, len); printk 1009 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: reset port failed to disable port\n", printk 1015 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: reset port failed to enable " printk 1025 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: failed to restore fragmentation " printk 1052 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "Could not get RID for component %s\n", txt); printk 1056 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt, printk 1079 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Port type setting to %d failed\n", printk 1091 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: AP own SSID setting failed\n", dev->name); printk 1099 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: MAC data length setting to %d failed\n", printk 1105 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Channel list read failed\n", dev->name); printk 1113 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: Channel setting out of range " printk 1121 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Channel setting to %d failed\n", printk 1129 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Beacon interval setting to %d failed\n", printk 1139 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: DTIM period setting to %d failed\n", printk 1149 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n", printk 1156 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Desired SSID setting failed\n", dev->name); printk 1178 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: TXRateControl setting to %d failed\n", printk 1186 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: cnfSupportedRates setting to %d failed\n", printk 1193 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: cnfBasicRates setting to %d failed\n", printk 1199 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Create IBSS setting to 1 failed\n", printk 1209 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: could not configure encryption\n", printk 1216 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: could not set host roaming\n", printk 1222 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n", printk 1233 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: cnfThirty2Tally setting " printk 1245 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: setting FragmentationThreshold to %d " printk 1251 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n", printk 1258 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n", printk 1269 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n", printk 1276 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: setting genericElement failed\n", printk 1303 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: first command failed - assuming card " printk 1311 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: init command completed too quickly - " printk 1323 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: assuming no Primary image in " printk 1334 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n", printk 1363 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("SWSUPPORT0 write/read failed: %04X != %04X\n", printk 1379 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Failed to read STA f/w version " printk 1399 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Using shorter TX FID " printk 1417 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: could not get own MAC address\n", printk 1434 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: Initialization failed\n", dev_info); printk 1450 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: MAC port 0 enabling failed\n", dev->name); printk 1463 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: MAC port 0 resetting failed\n", dev->name); printk 1527 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: card already removed or not configured " printk 1534 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: Shutdown failed\n", dev_info); printk 1564 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: driver bug - prism2_hw_reset() called " printk 1573 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: %s: already resetting card - " printk 1580 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: too many reset tries, skipping\n", printk 1585 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name); printk 1605 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: persistent download of primary " printk 1608 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: download (PRI) failed\n", printk 1613 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: persistent download of secondary " printk 1616 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: download (SEC) failed\n", printk 1637 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name); printk 1693 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n", printk 1699 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid " printk 1705 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called " printk 1764 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called " printk 1780 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT " printk 1818 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -" printk 1871 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n", printk 1907 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):" printk 1915 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg " printk 1939 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n", printk 1956 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name, printk 1982 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Received frame with invalid " printk 1992 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: RX failed to allocate skb\n", printk 2003 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: RX failed to read " printk 2059 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n", printk 2121 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("Already released txfid found at idx " printk 2124 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("Already reserved txfid found at idx " printk 2145 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new " printk 2148 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "TXFIDs:"); printk 2150 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(" %04x[%04x]", local->txfid[idx], printk 2152 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("\n"); printk 2173 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: TX callback - foreign frame\n", printk 2187 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n", printk 2196 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate " printk 2422 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n", printk 2437 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Received info frame with invalid " printk 2446 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Could not allocate skb for info " printk 2455 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, " printk 2545 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: SW TICK stuck? " printk 2552 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: trying to recover from IRQ " printk 2581 drivers/net/wireless/intersil/hostap/hostap_hw.c printk("%s: Interrupt, but SWSUPPORT0 does not match: " printk 2587 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x " printk 2617 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", printk 2629 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n", printk 2643 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n", printk 2669 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: prism2_interrupt: hw " printk 2761 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: defaulting to host-based encryption as " printk 2777 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a " printk 2803 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: passive scan detected pending " printk 2820 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: no allowed passive scan channels" printk 2825 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: passive scan channel %d\n", printk 2840 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_ERR "%s: passive scan channel set %d " printk 3022 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_DEBUG "%s: set_tim failed (aid=%d " printk 3058 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n", printk 3129 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "prism2: Unknown iw_mode %d; using " printk 3204 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_WARNING "%s: register netdevice failed!\n", printk 3208 drivers/net/wireless/intersil/hostap/hostap_hw.c printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name); printk 20 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: too short (len=%d) commtallies " printk 60 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: too short (len=%d) commtallies32 " printk 140 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: invalid linkstatus info frame " printk 230 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: JoinRequest failed\n", dev->name); printk 263 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: invalid scanresult info frame " printk 317 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: invalid hostscanresult info frame " printk 325 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: invalid result_size (0) in " printk 350 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: short HostScan result entry (%d/%d)\n", printk 429 drivers/net/wireless/intersil/hostap/hostap_info.c printk(KERN_DEBUG "%s: could not read CURRENTBSSID after " printk 178 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_WARNING "%s: could not initialize WEP: " printk 209 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name); printk 219 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); printk 272 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk("CNFWEPFLAGS reading failed\n"); printk 300 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_INFO "%s: updating basic rate set automatically " printk 309 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_WARNING "%s: failed to set " printk 320 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates " printk 510 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported " printk 668 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: JoinRequest %pM failed\n", printk 673 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Trying to join BSSID %pM\n", printk 703 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: ScanResults request failed - " printk 712 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only " printk 905 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Host AP mode does not support " printk 1083 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Enabling monitor mode\n"); printk 1088 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Port type setting for monitor mode " printk 1099 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "WEP flags setting failed\n"); printk 1107 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Setting monitor mode failed\n"); printk 1122 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name); printk 1158 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_WARNING "%s: empty SSID not allowed in Master " printk 1175 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "prism2: %s: operating mode changed " printk 1183 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: defaulting to host-based encryption as " printk 1375 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Alternate retry count " printk 1527 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Turning radio off: %s\n", printk 1538 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Turning radio on: %s\n", printk 1545 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Setting ALC on\n"); printk 1554 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Setting ALC off\n"); printk 1567 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp); printk 1570 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk("SIOCSIWTXPOW with mW is not supported; use dBm\n"); printk 1619 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk("SIOCGIWTXPOW - unknown txpower_type=%d\n", printk 1657 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name); printk 1694 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "SCANREQUEST failed\n"); printk 2092 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Scan result translation succeeded " printk 2097 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG printk 2354 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n", printk 2372 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: %s ALC\n", dev->name, printk 2538 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Leaving Host AP mode " printk 2544 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "HOSTSCAN failed\n"); printk 2561 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Returning to Host AP mode " printk 2587 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w " printk 2601 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_INFO "%s: invalid basic rate set - basic " printk 2657 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n", printk 2844 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n", printk 2905 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: process %d (%s) used deprecated iwpriv monitor " printk 2949 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: manual reset request(%d)\n", dev->name, *i); printk 2981 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "Unknown reset request %d\n", *i); printk 2994 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: Set RID[0x%X] = %d\n", dev->name, rid, value); printk 3264 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: unsupported algorithm %d\n", printk 3276 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", printk 3324 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: key setting failed\n", printk 3494 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", printk 3534 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: key setting failed\n", printk 3545 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%s: TX key idx setting failed\n", printk 3672 drivers/net/wireless/intersil/hostap/hostap_ioctl.c printk(KERN_DEBUG "%ssta: associated as client with AP %pM\n", printk 85 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_WARNING "%s: failed to add new netdevice!\n", printk 91 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: registered netdevice %s\n", printk 163 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n", printk 180 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "'%s' too long base device name\n", printk 344 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "Could not read current WEP flags.\n"); printk 374 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n", printk 400 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "Could not set key %d (len=%d)\n", printk 406 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "Could not set default keyid %d\n", idx); printk 413 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name); printk 441 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_INFO "%s: setting TX AntSel failed\n", printk 465 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_INFO "%s: setting RX AntSel failed\n", printk 509 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x " printk 524 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, " printk 531 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " printk 540 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG " A1=%pM A2=%pM A3=%pM A4=%pM\n", printk 543 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG " dst=%pM src=%pM len=%d\n", printk 553 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d " printk 559 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " printk 568 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG " A1=%pM A2=%pM A3=%pM A4=%pM\n", printk 571 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG " dst=%pM src=%pM len=%d\n", printk 662 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: could not set interface UP - no PRI " printk 676 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_WARNING "%s: could not enable MAC port\n", printk 735 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_INFO "%s: %sabling promiscuous mode failed\n", printk 773 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name); printk 777 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x " printk 880 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name); printk 896 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); printk 912 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name); printk 928 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); printk 1086 drivers/net/wireless/intersil/hostap/hostap_main.c printk(KERN_WARNING "Failed to mkdir " printk 229 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_DEBUG "%s: Original COR value: 0x%0x\n", dev->name, reg); printk 263 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_DEBUG "%s: COR sreset timeout\n", dev->name); printk 312 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n"); printk 318 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ; printk 341 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_WARNING "%s: request_irq failed\n", dev->name); printk 347 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_DEBUG "%s: hardware initialization failed\n", printk 352 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_INFO "%s: Intersil Prism2.5 PCI: " printk 431 drivers/net/wireless/intersil/hostap/hostap_pci.c printk(KERN_ERR "%s: pci_enable_device failed on resume\n", printk 272 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n", printk 355 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "%s: CIS: %6ph ...\n", dev_info, cis); printk 380 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "%s: cor_index=0x%x " printk 384 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_ERR "%s: COR offset not within " printk 396 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n", printk 413 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is" printk 418 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_WARNING "%s: invalid CIS data\n", dev_info); printk 423 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_INFO "%s: ignore_cis parameter set - ignoring " printk 465 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, " printk 476 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_ERR "%s: Error setting COR (expected=" printk 491 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_ERR "%s: cannot remap attr_mem\n", printk 496 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: " printk 502 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_INFO "Unknown PC Card CIS - not a " printk 507 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 " printk 516 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg); printk 522 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_WARNING "%s: Could not enable " printk 529 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM " printk 554 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_WARNING "%s: request_irq failed\n", dev->name); printk 560 drivers/net/wireless/intersil/hostap/hostap_plx.c printk(KERN_DEBUG "%s: hardware initialization failed\n", printk 361 drivers/net/wireless/intersil/hostap/hostap_proc.c printk(KERN_WARNING "%s: hostap proc directory not created\n", printk 368 drivers/net/wireless/intersil/hostap/hostap_proc.c printk(KERN_INFO "/proc/net/hostap/%s creation failed\n", printk 952 drivers/net/wireless/intersil/hostap/hostap_wlan.h do { if ((n) & DEBUG_MASK) printk(KERN_DEBUG args); } while (0) printk 954 drivers/net/wireless/intersil/hostap/hostap_wlan.h do { if ((n) & DEBUG_MASK) printk(args); } while (0) printk 1011 drivers/net/wireless/intersil/hostap/hostap_wlan.h printk(KERN_DEBUG "%s: I/O debug stopped\n", dev->name); printk 44 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); printk 48 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", printk 72 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); printk 156 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); printk 164 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "Cannot allocate network device\n"); printk 173 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "can't request IO resource !\n"); printk 183 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); printk 186 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "ioremap() failed\n"); printk 201 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq); printk 208 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 214 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 255 drivers/net/wireless/intersil/orinoco/airport.c printk(KERN_DEBUG "%s\n", version); printk 226 drivers/net/wireless/intersil/orinoco/cfg.c printk(KERN_WARNING "%s: Fixed fragmentation " printk 77 drivers/net/wireless/intersil/orinoco/hermes.c #define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ printk 78 drivers/net/wireless/intersil/orinoco/hermes.c printk(stuff); } while (0) printk 164 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_ERR "hermes @ %p: " printk 264 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_WARNING "hermes @ %p: " printk 270 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_ERR "hermes @ %p: " printk 285 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_WARNING "hermes @ %p: Card removed " printk 293 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_ERR "hermes @ %p: Timeout waiting for " printk 338 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_WARNING "hermes @ %p: " printk 345 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_ERR "hermes @ %p: " printk 402 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_ERR "hermes @ %p: BAP%d offset %s: " printk 511 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_WARNING "hermes @ %p: %s(): " printk 515 drivers/net/wireless/intersil/orinoco/hermes.c printk(KERN_WARNING "hermes @ %p: " printk 470 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting MAC address\n", printk 479 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting port type\n", printk 489 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting channel %d\n", printk 499 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_WARNING "%s: This firmware requires an " printk 513 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", printk 522 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting AP address\n", printk 535 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting OWNSSID\n", printk 543 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", printk 555 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting nickname\n", printk 566 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " printk 578 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting RTS threshold\n", printk 593 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting fragmentation\n", printk 601 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting bitrate\n", printk 612 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting up PM\n", printk 621 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting up PM\n", printk 629 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting up PM\n", printk 637 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting up PM\n", printk 649 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting preamble\n", printk 659 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d activating encryption\n", printk 714 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", printk 771 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", printk 865 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", printk 1062 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", printk 1079 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", printk 1104 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_ERR "%s: Error %d setting multicast list.\n", printk 1190 drivers/net/wireless/intersil/orinoco/hw.c printk(KERN_WARNING "%s: Channel out of range (%d)!\n", printk 248 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", printk 303 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " printk 387 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR printk 437 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Tx on stopped device!\n", printk 443 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", printk 449 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", printk 488 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d writing Tx " printk 502 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d writing Tx " printk 517 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d writing packet to BAP\n", printk 533 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", printk 547 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d transmitting packet\n", printk 578 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", printk 615 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " printk 656 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Tx timeout! " printk 781 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: oversized monitor frame, " printk 789 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", printk 804 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: error %d reading monitor frame\n", printk 849 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: error %d reading Rx descriptor. " printk 886 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", printk 904 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", printk 918 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: error %d reading frame. " printk 978 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Received encrypted frame from " printk 993 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: " printk 1135 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", printk 1179 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Cannot read scan results\n", printk 1207 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error issuing join request\n", dev->name); printk 1410 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: error %d reading info frame. " printk 1424 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", printk 1460 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", printk 1515 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", printk 1541 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "Scan result [%02X", buf[0]); printk 1543 drivers/net/wireless/intersil/orinoco/main.c printk(":%02X", buf[i]); printk 1544 drivers/net/wireless/intersil/orinoco/main.c printk("]\n"); printk 1556 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: Got chaninfo without scan, " printk 1572 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING printk 1599 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: Unknown information frame received: " printk 1610 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); printk 1627 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d configuring card\n", printk 1636 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d enabling MAC port\n", printk 1661 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Error %d disabling MAC port\n", printk 1755 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: orinoco_reset: Error %d " printk 1763 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", printk 1778 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", printk 1790 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); printk 1828 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Unable to disable port " printk 1836 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Unable to reconfigure card\n", printk 1843 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", printk 1850 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); printk 1863 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: TICK\n", dev->name); printk 1870 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", printk 1910 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: IRQ handler is looping too " printk 2354 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d re-initializing firmware\n", printk 2365 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_ERR "%s: Error %d restarting card\n", printk 2385 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_WARNING "%s: Error %d downing interface\n", printk 2406 drivers/net/wireless/intersil/orinoco/main.c printk(KERN_DEBUG "%s\n", version); printk 21 drivers/net/wireless/intersil/orinoco/mic.c printk(KERN_DEBUG "%s: could not allocate " printk 29 drivers/net/wireless/intersil/orinoco/mic.c printk(KERN_DEBUG "%s: could not allocate " printk 55 drivers/net/wireless/intersil/orinoco/mic.c printk(KERN_WARNING "%s: tfm_michael == NULL\n", __func__); printk 174 drivers/net/wireless/intersil/orinoco/orinoco.h printk(KERN_DEBUG args); \ printk 148 drivers/net/wireless/intersil/orinoco/orinoco_cs.c printk(KERN_ERR PFX "GetNextTuple(): No matching " printk 174 drivers/net/wireless/intersil/orinoco/orinoco_cs.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 181 drivers/net/wireless/intersil/orinoco/orinoco_cs.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 97 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "brg1 answer1 wrong\n"); printk 110 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "brg1 timed out\n"); printk 114 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "brg2 answer1 wrong\n"); printk 118 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "brg2 answer2 wrong\n"); printk 122 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "brg2 answer3 wrong\n"); printk 131 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", printk 151 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot enable PCI device\n"); printk 157 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); printk 163 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot map bridge registers\n"); printk 170 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); printk 177 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot map chipset registers\n"); printk 186 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot allocate network device\n"); printk 200 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); printk 207 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Hardware initialization failed\n"); printk 213 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "Initial reset failed\n"); printk 219 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 225 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 305 drivers/net/wireless/intersil/orinoco/orinoco_nortel.c printk(KERN_DEBUG "%s\n", version); printk 106 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Busy timeout\n"); printk 123 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Cannot enable PCI device\n"); printk 129 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); printk 135 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Cannot remap chipset registers\n"); printk 144 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Cannot allocate network device\n"); printk 156 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); printk 163 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "Initial reset failed\n"); printk 169 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 175 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 248 drivers/net/wireless/intersil/orinoco/orinoco_pci.c printk(KERN_DEBUG "%s\n", version); printk 44 drivers/net/wireless/intersil/orinoco/orinoco_pci.h printk(KERN_ERR "%s: pci_enable_device failed on resume\n", printk 53 drivers/net/wireless/intersil/orinoco/orinoco_pci.h printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n", printk 133 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Busy timeout\n"); printk 148 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_DEBUG PFX "CIS: "); printk 150 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk("%02X:", ioread8(card->attr_io + (i << 1))); printk 151 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk("\n"); printk 157 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "The CIS value of Prism2 PC " printk 172 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot enable interrupts\n"); printk 190 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot enable PCI device\n"); printk 196 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); printk 202 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot map bridge registers\n"); printk 209 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); printk 216 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot map chipset registers\n"); printk 225 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot allocate network device\n"); printk 239 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); printk 246 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Hardware initialization failed\n"); printk 252 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "Initial reset failed\n"); printk 258 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 264 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 353 drivers/net/wireless/intersil/orinoco/orinoco_plx.c printk(KERN_DEBUG "%s\n", version); printk 83 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Busy timeout\n"); printk 101 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Cannot enable PCI device\n"); printk 107 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); printk 113 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Cannot map bridge registers\n"); printk 120 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Cannot map chipset registers\n"); printk 129 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Cannot allocate network device\n"); printk 142 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); printk 149 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "Initial reset failed\n"); printk 155 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 161 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 228 drivers/net/wireless/intersil/orinoco/orinoco_tmd.c printk(KERN_DEBUG "%s\n", version); printk 103 drivers/net/wireless/intersil/orinoco/orinoco_usb.c do { printk(KERN_ERR PFX format "\n", ## arg); } while (0) printk 805 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "Out of memory for firmware buffer.\n"); printk 816 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "Invalid firmware variant offset: " printk 857 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "Firmware download failed, error %d\n", printk 920 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "Access failed, resetting (state %d," printk 925 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "ctx timed out\n"); printk 928 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "ctx failed\n"); printk 1060 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "BAP read beyond buffer end " printk 1071 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "BAP read beyond buffer end " printk 1077 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id); printk 1207 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR "%s: Tx on stopped device!\n", printk 1213 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", printk 1219 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR printk 1283 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR "%s: Error %d transmitting packet\n", printk 1379 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval); printk 1385 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval); printk 1502 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_ERR PFX "Some URB in progress\n"); printk 1737 drivers/net/wireless/intersil/orinoco/orinoco_usb.c printk(KERN_INFO PFX "Disconnected\n"); printk 117 drivers/net/wireless/intersil/orinoco/scan.c printk(KERN_DEBUG "Invalid channel designation %04X(%04X)", printk 205 drivers/net/wireless/intersil/orinoco/scan.c printk(KERN_ERR "%s: Invalid atom_len in scan " printk 222 drivers/net/wireless/intersil/orinoco/scan.c printk(KERN_ERR "%s: Unexpected scan data length %zu, " printk 210 drivers/net/wireless/intersil/orinoco/spectrum_cs.c printk(KERN_ERR PFX "GetNextTuple(): No matching " printk 241 drivers/net/wireless/intersil/orinoco/spectrum_cs.c printk(KERN_ERR PFX "orinoco_init() failed\n"); printk 248 drivers/net/wireless/intersil/orinoco/spectrum_cs.c printk(KERN_ERR PFX "orinoco_if_add() failed\n"); printk 98 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", printk 182 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " printk 190 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_WARNING "%s: Manual roaming supported only in " printk 199 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_WARNING "%s: Desired ESSID must be set for " printk 797 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_ERR "%s: Error %d setting TKIP key" printk 1109 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); printk 1114 drivers/net/wireless/intersil/orinoco/wext.c printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); printk 99 drivers/net/wireless/intersil/p54/fwio.c printk(KERN_INFO "p54: rx_mtu reduced from %d " printk 74 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG printk 334 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG printk 1235 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG printk 1243 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG printk 1290 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG "%s: WPA IE Attachment was set\n", printk 2156 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG "Failed to add BSS WPA entry for " printk 2231 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed " printk 2359 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG "Authenticate from: address:\t%pM\n", printk 2405 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG "No WPA IE found from address:\t%pM\n", printk 2442 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk(KERN_DEBUG "No WPA IE found from address:\t%pM\n", printk 2526 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: Disabling WPA\n", ndev->name); printk 2530 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: Enabling WPA\n", ndev->name); printk 2582 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: oid 0x%08X\n", ndev->name, *uwrq); printk 2595 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid); printk 2603 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: ret: %i\n", ndev->name, ret); printk 2609 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: EIO\n", ndev->name); printk 2616 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: len: %i\n", ndev->name, data->length); printk 2631 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid, printk 2639 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: ret: %i\n", ndev->name, ret); printk 2645 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: EIO\n", ndev->name); printk 2650 drivers/net/wireless/intersil/prism54/isl_ioctl.c printk("%s: response_op: %i\n", ndev->name, printk 84 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR printk 96 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR printk 138 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: firmware version: %.8s\n", printk 401 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name); printk 455 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name); printk 460 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "%s: could not upload firmware ('%s')\n", printk 467 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: firmware upload complete\n", printk 503 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n", printk 510 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); printk 526 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); printk 534 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name); printk 551 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name); printk 596 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "%s: islpci_reset: failure\n", printk 605 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n"); printk 618 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "islpci_alloc_memory\n"); printk 626 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "PCI memory remapping failed\n"); printk 646 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "%s: could not allocate DMA memory, aborting!", printk 685 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "Error allocating skb.\n"); printk 703 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_ERR "failed to map skb DMA'able\n"); printk 942 drivers/net/wireless/intersil/prism54/islpci_dev.c printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n", printk 90 drivers/net/wireless/intersil/prism54/islpci_eth.c printk(KERN_ERR "%s: transmit device queue full when awake\n", printk 123 drivers/net/wireless/intersil/prism54/islpci_eth.c printk("islpci_eth_transmit:wds_mac\n"); printk 139 drivers/net/wireless/intersil/prism54/islpci_eth.c printk(KERN_ERR "%s: Cannot allocate skb\n", printk 156 drivers/net/wireless/intersil/prism54/islpci_eth.c printk("islpci_eth_transmit:wds_mac\n"); printk 183 drivers/net/wireless/intersil/prism54/islpci_eth.c printk(KERN_WARNING "%s: cannot map buffer to PCI\n", printk 394 drivers/net/wireless/intersil/prism54/islpci_eth.c printk printk 484 drivers/net/wireless/intersil/prism54/islpci_eth.c printk(KERN_WARNING printk 490 drivers/net/wireless/intersil/prism54/islpci_eth.c printk(KERN_WARNING printk 93 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME); printk 110 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME); printk 131 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_INFO "PCI TRDY/RETRY unchanged\n"); printk 137 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n", printk 145 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n", printk 160 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: could not configure network device\n", printk 177 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: could not install IRQ handler\n", printk 212 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name); printk 216 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_DEBUG "%s: removing device\n", ndev->name); printk 278 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_NOTICE "%s: got resume request\n", ndev->name); printk 282 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_ERR "%s: pci_enable_device failed on resume\n", printk 301 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_INFO "Loaded %s driver, version %s\n", printk 319 drivers/net/wireless/intersil/prism54/islpci_hotplug.c printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME); printk 41 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk("[%02x]", *buffer & 255); printk 46 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk("\n"); printk 122 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING printk 171 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_DEBUG "%s: mgmt frame too large %d\n", printk 209 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n", printk 218 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING "%s: mgmt tx queue is still full\n", printk 284 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING "%s: unknown flags 0x%04x\n", printk 298 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING printk 311 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING "%s: no PIMFOR header found\n", printk 335 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_DEBUG printk 361 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_DEBUG printk 376 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING printk 464 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_DEBUG printk 473 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_DEBUG printk 481 drivers/net/wireless/intersil/prism54/islpci_mgt.c printk(KERN_WARNING "%s: timeout waiting for mgmt response\n", printk 18 drivers/net/wireless/intersil/prism54/islpci_mgt.h #define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0) printk 570 drivers/net/wireless/intersil/prism54/oid_mgt.c printk(KERN_DEBUG printk 600 drivers/net/wireless/intersil/prism54/oid_mgt.c printk(KERN_ERR "%s: mgt_commit_list: failure. " printk 679 drivers/net/wireless/intersil/prism54/oid_mgt.c printk(KERN_ERR "%s: mgt_update_addr: failure\n", priv->ndev->name); printk 704 drivers/net/wireless/intersil/prism54/oid_mgt.c printk(KERN_DEBUG "%s: mgt_commit: failure\n", priv->ndev->name); printk 741 drivers/net/wireless/intersil/prism54/oid_mgt.c printk(KERN_DEBUG "%s: Unlatching OIDs failed\n", priv->ndev->name); printk 773 drivers/net/wireless/intersil/prism54/oid_mgt.c printk(KERN_DEBUG "looking for an unknown oid 0x%x", oid); printk 821 drivers/net/wireless/intersil/prism54/oid_mgt.c printk("nr : %u\n", freq->nr); printk 2771 drivers/net/wireless/mac80211_hwsim.c printk(KERN_DEBUG printk 3816 drivers/net/wireless/mac80211_hwsim.c printk(KERN_INFO "mac80211_hwsim: wmediumd released netlink" printk 3832 drivers/net/wireless/mac80211_hwsim.c printk(KERN_INFO "mac80211_hwsim: initializing netlink\n"); printk 53 drivers/net/wireless/marvell/libertas/defs.h printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \ printk 97 drivers/net/wireless/marvell/libertas/defs.h printk("\n"); printk 98 drivers/net/wireless/marvell/libertas/defs.h printk(DRV_NAME " %s: ", prompt); printk 100 drivers/net/wireless/marvell/libertas/defs.h printk("%02x ", (u8) * buf); printk 103 drivers/net/wireless/marvell/libertas/defs.h printk("\n"); printk 100 drivers/net/wireless/marvell/libertas/if_cs.c printk(KERN_INFO "inb %08x<%02x\n", reg, val); printk 107 drivers/net/wireless/marvell/libertas/if_cs.c printk(KERN_INFO "inw %08x<%04x\n", reg, val); printk 117 drivers/net/wireless/marvell/libertas/if_cs.c printk(KERN_INFO "insw %08x<(0x%lx words)\n", printk 125 drivers/net/wireless/marvell/libertas/if_cs.c printk(KERN_INFO "outb %08x>%02x\n", reg, val); printk 132 drivers/net/wireless/marvell/libertas/if_cs.c printk(KERN_INFO "outw %08x>%04x\n", reg, val); printk 143 drivers/net/wireless/marvell/libertas/if_cs.c printk(KERN_INFO "outsw %08x>(0x%lx words)\n", printk 1390 drivers/net/wireless/marvell/libertas/if_sdio.c printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n"); printk 1391 drivers/net/wireless/marvell/libertas/if_sdio.c printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n"); printk 1269 drivers/net/wireless/marvell/libertas/if_spi.c printk(KERN_INFO "libertas_spi: Libertas SPI driver\n"); printk 182 drivers/net/wireless/marvell/libertas/if_usb.c printk(KERN_CRIT "Resetting OLPC wireless via EC...\n"); printk 102 drivers/net/wireless/marvell/libertas_tf/cmd.c printk(KERN_INFO "libertastf: %pM, fw %u.%u.%up%u, cap 0x%08x\n", printk 51 drivers/net/wireless/marvell/libertas_tf/deb_defs.h printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \ printk 137 drivers/net/wireless/marvell/libertas_tf/main.c printk(KERN_DEBUG "libertastf: command timer expired; " printk 142 drivers/net/wireless/marvell/libertas_tf/main.c printk(KERN_DEBUG "libertas: command %x timed out\n", printk 710 drivers/net/wireless/marvell/libertas_tf/main.c printk(KERN_ERR "libertastf: couldn't create workqueue\n"); printk 560 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Error requesting helper fw %s\n", printk 580 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Error requesting firmware file %s\n", printk 755 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: helper image needed but none " printk 762 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: unable to load firmware " printk 777 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: unable to load firmware image\n", printk 2543 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Unsupported fw API version for %s." printk 5714 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Error requesting preferred fw %s.\n" printk 5719 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Error requesting alt fw %s\n", printk 5736 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Error requesting helper fw %s\n", printk 5775 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Error requesting alt fw %s\n", printk 5788 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Unexpected firmware loading state: %d\n", printk 6054 drivers/net/wireless/marvell/mwl8k.c printk(KERN_WARNING "mwl8k: Failed to reload firmware image.\n"); printk 6192 drivers/net/wireless/marvell/mwl8k.c printk(KERN_INFO "%s version %s\n", MWL8K_DESC, MWL8K_VERSION); printk 6199 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Cannot enable new PCI device\n", printk 6206 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: Cannot obtain PCI resources\n", printk 6216 drivers/net/wireless/marvell/mwl8k.c printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME); printk 6267 drivers/net/wireless/marvell/mwl8k.c printk(KERN_WARNING "AP fw is unavailable. Using STA fw."); printk 6270 drivers/net/wireless/marvell/mwl8k.c printk(KERN_WARNING "STA fw is unavailable. Using AP fw."); printk 57 drivers/net/wireless/ralink/rt2x00/rt2x00.h printk(KERN_ERR KBUILD_MODNAME ": %s: Error - " fmt, \ printk 355 drivers/net/wireless/ray_cs.c printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n", printk 425 drivers/net/wireless/ray_cs.c printk("ray_config register_netdev() failed\n"); printk 430 drivers/net/wireless/ray_cs.c printk(KERN_INFO "%s: RayLink, irq %d, hw_addr %pM\n", printk 479 drivers/net/wireless/ray_cs.c printk(KERN_INFO "ray_init ERROR card status = %2x\n", printk 547 drivers/net/wireless/ray_cs.c printk(KERN_INFO "ray dl_startup_params failed - " printk 640 drivers/net/wireless/ray_cs.c printk(KERN_DEBUG printk 644 drivers/net/wireless/ray_cs.c printk(" %2x", printk 648 drivers/net/wireless/ray_cs.c printk("\n"); printk 654 drivers/net/wireless/ray_cs.c printk(KERN_INFO printk 780 drivers/net/wireless/ray_cs.c printk(KERN_INFO "ray_dev_init dl_startup_params failed - " printk 873 drivers/net/wireless/ray_cs.c printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n", printk 1492 drivers/net/wireless/ray_cs.c printk(KERN_INFO printk 1630 drivers/net/wireless/ray_cs.c printk(KERN_INFO "ray_cs Authentication with access point failed" printk 2286 drivers/net/wireless/ray_cs.c printk(KERN_DEBUG printk 2290 drivers/net/wireless/ray_cs.c printk(KERN_DEBUG "untranslate skb->data = %p\n", skb->data); printk 2329 drivers/net/wireless/ray_cs.c printk("ray_cs untranslate very confused by packet\n"); printk 2344 drivers/net/wireless/ray_cs.c printk(KERN_DEBUG "skb->data after untranslate:"); printk 2346 drivers/net/wireless/ray_cs.c printk("%02x ", skb->data[i]); printk 2347 drivers/net/wireless/ray_cs.c printk("\n"); printk 1734 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n", printk 1741 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n", printk 1751 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n", printk 1759 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", printk 1768 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n", printk 1850 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", printk 1903 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", printk 1910 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n", printk 1917 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" printk 1927 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c printk(KERN_ERR "%s (rtl8180): Cannot register device\n", printk 1440 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n"); printk 1500 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly " printk 1613 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c printk(KERN_INFO "rtl8187: inconsistency between id with OEM" printk 1627 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c printk(KERN_ERR "rtl8187: Cannot register device\n"); printk 154 drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c printk(KERN_INFO "LEDs: Failed to register %s\n", name); printk 181 drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid); printk 36 drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c printk(KERN_INFO "rtl8187: wireless switch is %s\n", printk 51 drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n", printk 2385 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c printk("mac->link_state = %d\n", mac->link_state); printk 2455 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c printk("hw_rof_enable\n"); printk 101 drivers/net/wireless/st/cw1200/cw1200_spi.c printk("%02x ", ((u8 *)t_addr.tx_buf)[i]); printk 102 drivers/net/wireless/st/cw1200/cw1200_spi.c printk(" : "); printk 104 drivers/net/wireless/st/cw1200/cw1200_spi.c printk("%02x ", ((u8 *)t_msg.rx_buf)[i]); printk 105 drivers/net/wireless/st/cw1200/cw1200_spi.c printk("\n"); printk 166 drivers/net/wireless/st/cw1200/cw1200_spi.c printk("%02x ", ((u8 *)t_addr.tx_buf)[i]); printk 167 drivers/net/wireless/st/cw1200/cw1200_spi.c printk(" : "); printk 169 drivers/net/wireless/st/cw1200/cw1200_spi.c printk("%02x ", ((u8 *)t_msg.tx_buf)[i]); printk 170 drivers/net/wireless/st/cw1200/cw1200_spi.c printk("\n"); printk 44 drivers/net/wireless/ti/wl1251/wl1251.h printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) printk 47 drivers/net/wireless/ti/wl1251/wl1251.h printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) printk 50 drivers/net/wireless/ti/wl1251/wl1251.h printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) printk 53 drivers/net/wireless/ti/wl1251/wl1251.h printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg) printk 58 drivers/net/wireless/ti/wl1251/wl1251.h printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ printk 73 drivers/net/wireless/ti/wlcore/debug.h printk(KERN_DEBUG pr_fmt(DRIVER_PREFIX fmt "\n"), \ printk 90 drivers/net/wireless/ti/wlcore/sdio.c printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr); printk 109 drivers/net/wireless/ti/wlcore/sdio.c printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr); printk 445 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "%s: %s status=%d\n", __func__, printk 835 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "%s: Wireless LAN online. BSSID: %pM\n", printk 929 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "Wireless LAN offline\n"); printk 969 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "Unsupported packet type!\n"); printk 977 drivers/net/wireless/wl3501_cs.c printk(KERN_WARNING "%s: Can't alloc a sk_buff of size %d.\n", printk 1171 drivers/net/wireless/wl3501_cs.c printk(KERN_WARNING "%s: failed to reset the board!\n", __func__); printk 1222 drivers/net/wireless/wl3501_cs.c printk(KERN_WARNING "%s: failed!\n", __func__); printk 1243 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "%s: WL3501 closed\n", dev->name); printk 1266 drivers/net/wireless/wl3501_cs.c printk(KERN_WARNING "%s: Can't initialize Firmware!\n", printk 1296 drivers/net/wireless/wl3501_cs.c printk(KERN_ERR "%s: Error %d resetting card on Tx timeout!\n", printk 1364 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "%s: Card Name: %s\n" printk 1372 drivers/net/wireless/wl3501_cs.c printk(KERN_WARNING "%s: Can't initialize firmware!\n", dev->name); printk 1931 drivers/net/wireless/wl3501_cs.c printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n"); printk 1940 drivers/net/wireless/wl3501_cs.c printk(KERN_WARNING "%s: Can't read MAC addr in flash ROM?\n", printk 1950 drivers/net/wireless/wl3501_cs.c printk(KERN_INFO "%s: wl3501 @ 0x%3.3x, IRQ %d, " printk 1549 drivers/net/wireless/zydas/zd1211rw/zd_usb.c printk(KERN_ERR "%s couldn't create workqueue\n", driver.name); printk 1556 drivers/net/wireless/zydas/zd1211rw/zd_usb.c printk(KERN_ERR "%s usb_register() failed. Error number %d\n", printk 1269 drivers/of/base.c printk("%s %pOF", msg, args->np); printk 841 drivers/of/fdt.c printk("'%s' ", prop); printk 846 drivers/of/fdt.c printk("]\n\n"); printk 152 drivers/oprofile/nmi_timer_int.c printk(KERN_INFO "oprofile: using NMI timer interrupt.\n"); printk 120 drivers/oprofile/timer_int.c printk(KERN_INFO "oprofile: using timer interrupt.\n"); printk 78 drivers/parisc/asp.c printk(KERN_INFO "%s version %d at 0x%lx found.\n", printk 85 drivers/parisc/asp.c printk(KERN_ERR "%s(): cannot get GSC irq\n", __func__); printk 76 drivers/parisc/ccio-dma.c #define DBG_INIT(x...) printk(x) printk 82 drivers/parisc/ccio-dma.c #define DBG_RUN(x...) printk(x) printk 88 drivers/parisc/ccio-dma.c #define DBG_RES(x...) printk(x) printk 94 drivers/parisc/ccio-dma.c #define DBG_RUN_SG(x...) printk(x) printk 705 drivers/parisc/ccio-dma.c printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); printk 1375 drivers/parisc/ccio-dma.c printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n", printk 1522 drivers/parisc/ccio-dma.c printk(KERN_ERR MODULE_NAME ": memory allocation failure\n"); printk 1528 drivers/parisc/ccio-dma.c printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, printk 64 drivers/parisc/dino.c #define DBG(x...) printk(x) printk 443 drivers/parisc/dino.c printk(KERN_INFO "PCI: Cirrus Cardbus IRQ fixup for %s, from %d to %d\n", printk 504 drivers/parisc/dino.c printk(KERN_ERR "Dino: cannot attach bus %s\n", printk 650 drivers/parisc/dino.c printk(KERN_WARNING "Device %s has undefined IRQ, " printk 657 drivers/parisc/dino.c printk(KERN_WARNING "Device %s has unassigned IRQ\n", pci_name(dev)); printk 751 drivers/parisc/dino.c printk(KERN_WARNING "%s: No PCI devices enabled.\n", name); printk 772 drivers/parisc/dino.c printk(KERN_ERR "%s is out of resource windows for range %d (0x%lx-0x%lx)\n", name, count, start, end); printk 796 drivers/parisc/dino.c printk(KERN_ERR "%s: failed to claim PCI Bus address " printk 834 drivers/parisc/dino.c printk(KERN_WARNING "%s: gsc_alloc_irq() failed\n", name); printk 840 drivers/parisc/dino.c printk(KERN_WARNING "%s: request_irq() failed with %d\n", printk 875 drivers/parisc/dino.c printk(KERN_ERR "%s: request I/O Port region failed " printk 937 drivers/parisc/dino.c printk("%s version %s found at 0x%lx\n", name, version, hpa); printk 940 drivers/parisc/dino.c printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%lx)!\n", printk 948 drivers/parisc/dino.c printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n"); printk 954 drivers/parisc/dino.c printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa); printk 959 drivers/parisc/dino.c printk(KERN_WARNING printk 972 drivers/parisc/dino.c printk("dino_init_chip - couldn't alloc dino_device\n"); printk 1015 drivers/parisc/dino.c printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n", printk 46 drivers/parisc/eisa.c #define EISA_DBG(msg, arg...) printk(KERN_DEBUG "eisa: " msg, ## arg) printk 242 drivers/parisc/eisa.c printk(KERN_ALERT "eisa: uhh, irq2?\n"); printk 305 drivers/parisc/eisa.c printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", printk 317 drivers/parisc/eisa.c printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n"); printk 326 drivers/parisc/eisa.c printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n"); printk 333 drivers/parisc/eisa.c printk(KERN_ERR "EISA: request_irq failed!\n"); printk 360 drivers/parisc/eisa.c printk(KERN_ERR "EISA: ioremap_nocache failed!\n"); printk 376 drivers/parisc/eisa.c printk(KERN_ERR "EISA: Failed to register EISA root\n"); printk 417 drivers/parisc/eisa.c printk(KERN_WARNING printk 428 drivers/parisc/eisa.c printk(KERN_WARNING printk 447 drivers/parisc/eisa.c printk(KERN_ERR "eisa: EISA irq value are 0-15\n"); printk 91 drivers/parisc/eisa_eeprom.c printk(KERN_ERR "EISA EEPROM: cannot register misc device.\n"); printk 95 drivers/parisc/eisa_eeprom.c printk(KERN_INFO "EISA EEPROM at 0x%px\n", eisa_eeprom_addr); printk 99 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); printk 189 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); printk 222 drivers/parisc/eisa_enumerator.c printk(KERN_WARNING "port_init: unverified mask attribute\n"); printk 235 drivers/parisc/eisa_enumerator.c printk(KERN_WARNING "port_init: unverified mask attribute\n"); printk 247 drivers/parisc/eisa_enumerator.c printk(KERN_WARNING "port_init: unverified mask attribute\n"); printk 257 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "Invalid port init word %02x\n", c); printk 295 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); printk 333 drivers/parisc/eisa_enumerator.c printk(KERN_INFO "EISA slot %d: %s %s ", printk 355 drivers/parisc/eisa_enumerator.c printk("function %d have free-form configuration, skipping ", printk 396 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "eisa_enumerator: function %d length mis-match " printk 410 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "eisa_enumerator: config data length mis-match got %d, expected %d\n", printk 416 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "eisa_enumerator: number of functions mis-match got %d, expected %d\n", printk 443 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "EISA slot %d a configured board was not detected (", printk 447 drivers/parisc/eisa_enumerator.c printk(" expected %s)\n", id_string); printk 454 drivers/parisc/eisa_enumerator.c printk(KERN_ERR "EISA slot %d id mis-match: got %s", printk 458 drivers/parisc/eisa_enumerator.c printk(" expected %s\n", id_string); printk 491 drivers/parisc/eisa_enumerator.c printk(KERN_INFO "Enumerating EISA bus\n"); printk 510 drivers/parisc/eisa_enumerator.c printk (KERN_WARNING "EISA EEPROM offset 0x%x out of range\n",es->config_data_offset); printk 28 drivers/parisc/gsc.c #define DEBPRINTK printk printk 37 drivers/parisc/gsc.c printk("cannot get irq\n"); printk 56 drivers/parisc/gsc.c printk("cannot claim irq %d\n", c); printk 220 drivers/parisc/gsc.c printk(KERN_WARNING "%s IRQ %d EIM 0x%x", gsc_asic->name, printk 223 drivers/parisc/gsc.c printk(" IMR is non-zero! (0x%x)", printk 225 drivers/parisc/gsc.c printk("\n"); printk 59 drivers/parisc/hppb.c printk(KERN_ERR "HP-PB: Unable to allocate memory.\n"); printk 146 drivers/parisc/iosapic.c #define DBG(x...) printk(x) printk 152 drivers/parisc/iosapic.c #define DBG_IRT(x...) printk(x) printk 289 drivers/parisc/iosapic.c printk(KERN_WARNING MODULE_NAME ": read_irt : can " printk 320 drivers/parisc/iosapic.c printk(KERN_WARNING MODULE_NAME ": read_irt : can " printk 338 drivers/parisc/iosapic.c printk(MODULE_NAME " Interrupt Routing Table (cell %ld)\n", cell_num); printk 339 drivers/parisc/iosapic.c printk(MODULE_NAME " start = 0x%p num_entries %ld entry_size %d\n", printk 345 drivers/parisc/iosapic.c printk(MODULE_NAME " %02x %02x %02x %02x %02x %02x %02x %02x %08x%08x\n", printk 439 drivers/parisc/iosapic.c printk(KERN_WARNING MODULE_NAME ": 0x%lx : no IRT entry for slot %d, pin %d\n", printk 630 drivers/parisc/iosapic.c printk("iosapic_enable_irq(): regs %p", vi->eoi_addr); printk 632 drivers/parisc/iosapic.c printk(" %x", readl(t)); printk 633 drivers/parisc/iosapic.c printk("\n"); printk 636 drivers/parisc/iosapic.c printk("iosapic_enable_irq(): sel "); printk 642 drivers/parisc/iosapic.c printk(" %x", d1); printk 645 drivers/parisc/iosapic.c printk("\n"); printk 714 drivers/parisc/iosapic.c printk(KERN_WARNING MODULE_NAME ": hpa not registered for %s\n", printk 741 drivers/parisc/iosapic.c printk("iosapic: no IRTE for %s (IRQ not connected?)\n", printk 960 drivers/parisc/iosapic.c printk(KERN_DEBUG MODULE_NAME ": Interrupt Routing Table (%lx entries)\n", num_entry); printk 963 drivers/parisc/iosapic.c printk(KERN_DEBUG "%p : %2d %.8x %.8x %.8x %.8x\n", printk 972 drivers/parisc/iosapic.c printk(KERN_DEBUG MODULE_NAME ": vector_info[%d] is at %p\n", vi->irqline, vi); printk 973 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\tstatus: %.4x\n", vi->status); printk 974 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\ttxn_irq: %d\n", vi->txn_irq); printk 975 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\ttxn_addr: %lx\n", vi->txn_addr); printk 976 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\ttxn_data: %lx\n", vi->txn_data); printk 977 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\teoi_addr: %p\n", vi->eoi_addr); printk 978 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\teoi_data: %x\n", vi->eoi_data); printk 985 drivers/parisc/iosapic.c printk(KERN_DEBUG MODULE_NAME ": io_sapic_info at %p\n", isi); printk 986 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\tisi_hpa: %lx\n", isi->isi_hpa); printk 987 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\tisi_status: %x\n", isi->isi_status); printk 988 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\tisi_version: %x\n", isi->isi_version); printk 989 drivers/parisc/iosapic.c printk(KERN_DEBUG "\t\tisi_vector: %p\n", isi->isi_vector); printk 178 drivers/parisc/lasi.c printk(KERN_INFO "%s version %d at 0x%lx found.\n", printk 190 drivers/parisc/lasi.c printk(KERN_ERR "%s(): cannot get GSC irq\n", printk 60 drivers/parisc/lba_pci.c #define DBG(x...) printk(x) printk 66 drivers/parisc/lba_pci.c #define DBG_PORT(x...) printk(x) printk 72 drivers/parisc/lba_pci.c #define DBG_CFG(x...) printk(x) printk 78 drivers/parisc/lba_pci.c #define DBG_PAT(x...) printk(x) printk 166 drivers/parisc/lba_pci.c printk(KERN_DEBUG "(%p)", r->parent); printk 167 drivers/parisc/lba_pci.c for (i = d; i ; --i) printk(" "); printk 168 drivers/parisc/lba_pci.c printk(KERN_DEBUG "%p [%lx,%lx]/%lx\n", r, printk 607 drivers/parisc/lba_pci.c printk(KERN_WARNING "LBA: Truncating lmmio_space [%lx/%lx] " printk 758 drivers/parisc/lba_pci.c printk("FAILED: lba_fixup_bus() request for " printk 771 drivers/parisc/lba_pci.c printk(KERN_ERR "FAILED: lba_fixup_bus() request for " printk 783 drivers/parisc/lba_pci.c printk("FAILED: lba_fixup_bus() request for " printk 1103 drivers/parisc/lba_pci.c printk(KERN_WARNING MODULE_NAME printk 1127 drivers/parisc/lba_pci.c printk(KERN_WARNING MODULE_NAME printk 1150 drivers/parisc/lba_pci.c printk(KERN_WARNING MODULE_NAME printk 1361 drivers/parisc/lba_pci.c printk(KERN_DEBUG "LBA %lx STAT_CTL %Lx ERROR_CFG %Lx STATUS %Lx DMA_CTL %Lx\n", printk 1367 drivers/parisc/lba_pci.c printk(KERN_DEBUG " ARB mask %Lx pri %Lx mode %Lx mtlt %Lx\n", printk 1372 drivers/parisc/lba_pci.c printk(KERN_DEBUG " HINT cfg 0x%Lx\n", printk 1374 drivers/parisc/lba_pci.c printk(KERN_DEBUG " HINT reg "); printk 1377 drivers/parisc/lba_pci.c printk(" %Lx", READ_REG64(d->hba.base_addr + i)); printk 1379 drivers/parisc/lba_pci.c printk("\n"); printk 1393 drivers/parisc/lba_pci.c printk(KERN_DEBUG "NOTICE: PCI bus reset still asserted! (clearing)\n"); printk 1398 drivers/parisc/lba_pci.c printk(KERN_DEBUG "NOTICE: LBA in SMART mode! (cleared)\n"); printk 1443 drivers/parisc/lba_pci.c printk(KERN_DEBUG "NOTICE: Enabling PCI Arbitration\n"); printk 1497 drivers/parisc/lba_pci.c printk(KERN_INFO "Elroy version %s (0x%x) found at 0x%lx\n", printk 1501 drivers/parisc/lba_pci.c printk(KERN_WARNING "Can't support LBA older than " printk 1526 drivers/parisc/lba_pci.c printk(KERN_INFO "%s version TR%d.%d (0x%x) found at 0x%lx\n", printk 1532 drivers/parisc/lba_pci.c printk(KERN_ERR "Unknown LBA found at 0x%lx\n", printk 1546 drivers/parisc/lba_pci.c printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n"); printk 1600 drivers/parisc/lba_pci.c printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n", printk 71 drivers/parisc/led.c #define DPRINTK(x) printk x printk 229 drivers/parisc/led.c printk(KERN_CRIT "Parse error: expect \"n n n\" (n == 0 or 1) for heartbeat,\ndisk io and lan tx/rx indicators\n"); printk 560 drivers/parisc/led.c printk(KERN_INFO "LCD display at %lx,%lx registered\n", printk 572 drivers/parisc/led.c printk(KERN_INFO "LED display at %lx registered\n", LED_DATA_REG); printk 579 drivers/parisc/led.c printk(KERN_INFO "LED (ASP-style) display at %lx registered\n", printk 585 drivers/parisc/led.c printk(KERN_ERR "%s: Wrong LCD/LED model %d !\n", printk 700 drivers/parisc/led.c printk(KERN_INFO "%s: KittyHawk-Machine (hversion 0x%x) found, " printk 742 drivers/parisc/led.c printk(KERN_INFO "PDC reported no LCD or LED.\n"); printk 751 drivers/parisc/led.c printk(KERN_WARNING "PDC reported unknown LCD/LED model %d\n", printk 39 drivers/parisc/pdc_stable.c #define DPRINTK(fmt, args...) printk(KERN_DEBUG fmt, ## args) printk 308 drivers/parisc/pdc_stable.c printk(KERN_WARNING "%s: attempt to set invalid \"%s\" " printk 328 drivers/parisc/pdc_stable.c printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n", printk 422 drivers/parisc/pdc_stable.c printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" layers to \"%s\"\n", printk 793 drivers/parisc/pdc_stable.c printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" to \"%s\"\n", printk 800 drivers/parisc/pdc_stable.c printk(KERN_WARNING "%s: Parse error: expect \"n\" (n == 0 or 1)\n", __func__); printk 1037 drivers/parisc/pdc_stable.c printk(KERN_INFO PDCS_PREFIX " facility v%s\n", PDCS_VERSION); printk 1077 drivers/parisc/pdc_stable.c printk(KERN_INFO PDCS_PREFIX " bailing out\n"); printk 85 drivers/parisc/power.c printk(KERN_ALERT KTHREAD_NAME ": Shutdown requested...\n"); printk 92 drivers/parisc/power.c printk(KERN_INFO KTHREAD_NAME ": %s\n", msg); printk 151 drivers/parisc/power.c printk(KERN_INFO KTHREAD_NAME ": Shutdown request aborted.\n"); printk 169 drivers/parisc/power.c printk(KERN_CRIT "POWERFAIL INTERRUPTION !\n"); printk 214 drivers/parisc/power.c case 0: printk(KERN_INFO DRIVER_NAME ": Gecko-style soft power switch enabled.\n"); printk 217 drivers/parisc/power.c case -1UL: printk(KERN_INFO DRIVER_NAME ": Soft power switch support not available.\n"); printk 220 drivers/parisc/power.c default: printk(KERN_INFO DRIVER_NAME ": Soft power switch at 0x%08lx enabled.\n", printk 226 drivers/parisc/power.c printk(KERN_ERR DRIVER_NAME ": thread creation failed. Driver not loaded.\n"); printk 67 drivers/parisc/sba_iommu.c #define DBG_INIT(x...) printk(x) printk 73 drivers/parisc/sba_iommu.c #define DBG_RUN(x...) printk(x) printk 79 drivers/parisc/sba_iommu.c #define DBG_RUN_SG(x...) printk(x) printk 86 drivers/parisc/sba_iommu.c #define DBG_RES(x...) printk(x) printk 204 drivers/parisc/sba_iommu.c printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n", printk 210 drivers/parisc/sba_iommu.c printk(KERN_DEBUG "%s %2d %p %016Lx\n", printk 217 drivers/parisc/sba_iommu.c printk(KERN_DEBUG "%s", msg); printk 276 drivers/parisc/sba_iommu.c printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n", printk 676 drivers/parisc/sba_iommu.c printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); printk 1277 drivers/parisc/sba_iommu.c printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n"); printk 1372 drivers/parisc/sba_iommu.c printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n", printk 1551 drivers/parisc/sba_iommu.c printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, printk 1766 drivers/parisc/sba_iommu.c printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n"); printk 1768 drivers/parisc/sba_iommu.c printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n"); printk 1930 drivers/parisc/sba_iommu.c printk(KERN_INFO "%s found %s at 0x%llx\n", printk 1935 drivers/parisc/sba_iommu.c printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n"); printk 85 drivers/parisc/superio.c #define DBG_INIT(x...) printk(x) printk 121 drivers/parisc/superio.c printk(KERN_ERR PFX "slave interrupted!\n"); printk 132 drivers/parisc/superio.c printk(KERN_WARNING PFX "spurious interrupt!\n"); printk 168 drivers/parisc/superio.c printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i)\n", printk 173 drivers/parisc/superio.c printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base); printk 177 drivers/parisc/superio.c printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base); printk 181 drivers/parisc/superio.c printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base); printk 185 drivers/parisc/superio.c printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base); printk 188 drivers/parisc/superio.c printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base); printk 269 drivers/parisc/superio.c printk(KERN_INFO PFX "USB regulator enabled\n"); printk 271 drivers/parisc/superio.c printk(KERN_ERR PFX "USB regulator not initialized!\n"); printk 276 drivers/parisc/superio.c printk(KERN_ERR PFX "could not get irq\n"); printk 291 drivers/parisc/superio.c printk(KERN_ERR PFX "Illegal irq number.\n"); printk 309 drivers/parisc/superio.c printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq); printk 347 drivers/parisc/superio.c printk(KERN_DEBUG "superio_fixup_irq(%s) ven 0x%x dev 0x%x from %ps\n", printk 403 drivers/parisc/superio.c printk(KERN_WARNING PFX "Register Serial #0 failed.\n"); printk 413 drivers/parisc/superio.c printk(KERN_WARNING PFX "Register Serial #1 failed.\n"); printk 428 drivers/parisc/superio.c printk(KERN_WARNING PFX "Probing parallel port failed.\n"); printk 441 drivers/parisc/superio.c printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog); printk 82 drivers/parisc/wax.c printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); printk 90 drivers/parisc/wax.c printk(KERN_ERR "%s(): cannot get GSC irq\n", printk 34 drivers/parport/daisy.c #define DPRINTK(stuff...) printk(stuff) printk 112 drivers/parport/daisy.c printk(KERN_INFO printk 126 drivers/parport/daisy.c printk(KERN_INFO printk 35 drivers/parport/ieee1284.c #define DPRINTK(stuff...) printk (stuff) printk 332 drivers/parport/ieee1284.c printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n"); printk 697 drivers/parport/ieee1284.c printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n"); printk 31 drivers/parport/ieee1284_ops.c #define DPRINTK(stuff...) printk (stuff) printk 602 drivers/parport/ieee1284_ops.c printk (KERN_WARNING printk 32 drivers/parport/parport_amiga.c #define DPRINTK printk printk 215 drivers/parport/parport_amiga.c printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name); printk 203 drivers/parport/parport_atari.c printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name); printk 145 drivers/parport/parport_cs.c printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " printk 241 drivers/parport/parport_gsc.c printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); printk 247 drivers/parport/parport_gsc.c printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n", printk 285 drivers/parport/parport_gsc.c printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); printk 318 drivers/parport/parport_gsc.c printk (KERN_WARNING "%s: irq %d in use, " printk 350 drivers/parport/parport_gsc.c printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n", printk 363 drivers/parport/parport_gsc.c printk("%s: initialize bidirectional-mode.\n", __func__); printk 367 drivers/parport/parport_gsc.c printk("%s: enhanced parport-modes not supported.\n", __func__); printk 74 drivers/parport/parport_gsc.h printk (KERN_DEBUG "parport_gsc_write_data(%p,0x%02x)\n", p, d); printk 83 drivers/parport/parport_gsc.h printk (KERN_DEBUG "parport_gsc_read_data(%p) = 0x%02x\n", printk 98 drivers/parport/parport_gsc.h printk (KERN_DEBUG printk 129 drivers/parport/parport_gsc.h printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", printk 158 drivers/parport/parport_gsc.h printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", printk 269 drivers/parport/parport_ip32.c # define pr_debug1(...) printk(KERN_DEBUG __VA_ARGS__) printk 302 drivers/parport/parport_ip32.c do { if (verbose_probing) printk(__VA_ARGS__); } while (0) printk 324 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str); printk 330 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 " ecr=0x%02x", ecr); printk 331 drivers/parport/parport_ip32.c printk(" %s", printk 334 drivers/parport/parport_ip32.c printk(",nErrIntrEn"); printk 336 drivers/parport/parport_ip32.c printk(",dmaEn"); printk 338 drivers/parport/parport_ip32.c printk(",serviceIntr"); printk 340 drivers/parport/parport_ip32.c printk(",f_full"); printk 342 drivers/parport/parport_ip32.c printk(",f_empty"); printk 343 drivers/parport/parport_ip32.c printk("\n"); printk 354 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 " cnfgA=0x%02x", cnfgA); printk 355 drivers/parport/parport_ip32.c printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses"); printk 358 drivers/parport/parport_ip32.c printk(",8 bits"); printk 361 drivers/parport/parport_ip32.c printk(",16 bits"); printk 364 drivers/parport/parport_ip32.c printk(",32 bits"); printk 367 drivers/parport/parport_ip32.c printk(",unknown ID"); printk 371 drivers/parport/parport_ip32.c printk(",ByteInTrans"); printk 373 drivers/parport/parport_ip32.c printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT, printk 375 drivers/parport/parport_ip32.c printk("\n"); printk 376 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 " cnfgB=0x%02x", cnfgB); printk 377 drivers/parport/parport_ip32.c printk(" irq=%u,dma=%u", printk 380 drivers/parport/parport_ip32.c printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL)); printk 382 drivers/parport/parport_ip32.c printk(",compress"); printk 383 drivers/parport/parport_ip32.c printk("\n"); printk 387 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 " dcr(%s)=0x%02x", printk 389 drivers/parport/parport_ip32.c printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd"); printk 391 drivers/parport/parport_ip32.c printk(",ackIntEn"); printk 393 drivers/parport/parport_ip32.c printk(",nSelectIn"); printk 395 drivers/parport/parport_ip32.c printk(",nInit"); printk 397 drivers/parport/parport_ip32.c printk(",nAutoFD"); printk 399 drivers/parport/parport_ip32.c printk(",nStrobe"); printk 400 drivers/parport/parport_ip32.c printk("\n"); printk 406 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 " dsr=0x%02x", dsr); printk 408 drivers/parport/parport_ip32.c printk("%cBusy", sep); printk 410 drivers/parport/parport_ip32.c printk("%cnAck", sep); printk 412 drivers/parport/parport_ip32.c printk("%cPError", sep); printk 414 drivers/parport/parport_ip32.c printk("%cSelect", sep); printk 416 drivers/parport/parport_ip32.c printk("%cnFault", sep); printk 418 drivers/parport/parport_ip32.c printk("%c(Print)", sep); printk 420 drivers/parport/parport_ip32.c printk("%cTimeout", sep); printk 421 drivers/parport/parport_ip32.c printk("\n"); printk 1340 drivers/parport/parport_ip32.c printk(KERN_WARNING PPIP32 printk 1646 drivers/parport/parport_ip32.c printk(KERN_INFO PPIP32 "%s: not ready in %s\n", printk 1663 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n", printk 1707 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s", printk 1727 drivers/parport/parport_ip32.c printk(KERN_INFO PPIP32 "%s: not ready in %s\n", printk 1744 drivers/parport/parport_ip32.c printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n", printk 2067 drivers/parport/parport_ip32.c printk(KERN_WARNING PPIP32 printk 2080 drivers/parport/parport_ip32.c printk(KERN_WARNING PPIP32 printk 2094 drivers/parport/parport_ip32.c printk(KERN_WARNING PPIP32 printk 2137 drivers/parport/parport_ip32.c printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)", printk 2140 drivers/parport/parport_ip32.c printk(", irq %d", p->irq); printk 2141 drivers/parport/parport_ip32.c printk(" ["); printk 2143 drivers/parport/parport_ip32.c printk("%s%s", f++ ? "," : "", #x) printk 2154 drivers/parport/parport_ip32.c printk("]\n"); printk 74 drivers/parport/parport_mfc3.c #define DPRINTK printk printk 328 drivers/parport/parport_mfc3.c printk(KERN_INFO "%s: Multiface III port using irq\n", p->name); printk 91 drivers/parport/parport_pc.c #define DPRINTK printk printk 148 drivers/parport/parport_pc.c printk(KERN_DEBUG "change_mode: but there's no ECR!\n"); printk 301 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 504 drivers/parport/parport_pc.c printk(KERN_DEBUG "Somebody wants the port\n"); printk 520 drivers/parport/parport_pc.c printk(KERN_DEBUG "FIFO write timed out\n"); printk 649 drivers/parport/parport_pc.c printk(KERN_DEBUG "DMA write timed out\n"); printk 669 drivers/parport/parport_pc.c printk(KERN_DEBUG "Somebody wants the port\n"); printk 729 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", printk 751 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); printk 773 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 813 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: PError timeout (%d) " printk 826 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", printk 847 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); printk 870 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: PE,1 timeout (%d) " printk 880 drivers/parport/parport_pc.c printk(KERN_DEBUG "%s: PE,2 timeout (%d) " printk 888 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 985 drivers/parport/parport_pc.c printk(KERN_INFO printk 993 drivers/parport/parport_pc.c printk(KERN_INFO printk 999 drivers/parport/parport_pc.c printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n", printk 1002 drivers/parport/parport_pc.c printk(KERN_INFO printk 1016 drivers/parport/parport_pc.c printk(KERN_INFO "Super-IO: too many chips!\n"); printk 1081 drivers/parport/parport_pc.c printk(KERN_INFO printk 1084 drivers/parport/parport_pc.c printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", printk 1090 drivers/parport/parport_pc.c printk(KERN_INFO printk 1093 drivers/parport/parport_pc.c printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", printk 1100 drivers/parport/parport_pc.c printk(KERN_INFO "Super-IO: too many chips!\n"); printk 1154 drivers/parport/parport_pc.c printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x " printk 1187 drivers/parport/parport_pc.c printk(KERN_INFO "SMSC chip at EFER=0x%x " printk 1322 drivers/parport/parport_pc.c printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n"); printk 1335 drivers/parport/parport_pc.c printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n"); printk 1347 drivers/parport/parport_pc.c printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n"); printk 1361 drivers/parport/parport_pc.c printk(KERN_INFO "IT%04X SuperIO detected.\n", dev); printk 1448 drivers/parport/parport_pc.c printk(KERN_INFO "parport 0x%lx (WARNING): CTR: " printk 1467 drivers/parport/parport_pc.c printk(KERN_INFO "parport 0x%lx (WARNING): DATA: " printk 1469 drivers/parport/parport_pc.c printk(KERN_INFO "parport 0x%lx: You gave this address, " printk 1608 drivers/parport/parport_pc.c printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); printk 1622 drivers/parport/parport_pc.c printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", printk 1645 drivers/parport/parport_pc.c printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n", printk 1660 drivers/parport/parport_pc.c printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", printk 1665 drivers/parport/parport_pc.c printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", printk 1669 drivers/parport/parport_pc.c printk(KERN_WARNING "0x%lx: Unknown implementation ID\n", printk 1678 drivers/parport/parport_pc.c printk(KERN_DEBUG "0x%lx: PWord is %d bits\n", printk 1681 drivers/parport/parport_pc.c printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, printk 1685 drivers/parport/parport_pc.c printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", printk 1687 drivers/parport/parport_pc.c printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); printk 2110 drivers/parport/parport_pc.c printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); printk 2112 drivers/parport/parport_pc.c printk(KERN_CONT " (0x%lx)", p->base_hi); printk 2123 drivers/parport/parport_pc.c printk(KERN_CONT ", irq %d", p->irq); printk 2147 drivers/parport/parport_pc.c printk(KERN_CONT ", dma %d", p->dma); printk 2150 drivers/parport/parport_pc.c printk(KERN_CONT ", using FIFO"); printk 2156 drivers/parport/parport_pc.c printk(KERN_CONT " ["); printk 2161 drivers/parport/parport_pc.c printk(KERN_CONT "%s%s", f ? "," : "", #x);\ printk 2177 drivers/parport/parport_pc.c printk(KERN_CONT "(,...)"); printk 2179 drivers/parport/parport_pc.c printk(KERN_CONT "]\n"); printk 2181 drivers/parport/parport_pc.c printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); printk 2196 drivers/parport/parport_pc.c printk(KERN_WARNING "%s: irq %d in use, " printk 2207 drivers/parport/parport_pc.c printk(KERN_WARNING "%s: dma %d in use, " printk 2218 drivers/parport/parport_pc.c printk(KERN_WARNING "%s: " printk 2333 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); printk 2342 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n"); printk 2346 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n"); printk 2350 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); printk 2354 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); printk 2358 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n"); printk 2362 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: unknown ITE887x\n"); printk 2363 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' " printk 2399 drivers/parport/parport_pc.c printk(KERN_INFO printk 2444 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n"); printk 2448 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); printk 2452 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); printk 2457 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); printk 2463 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); printk 2468 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); printk 2474 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 2510 drivers/parport/parport_pc.c printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n", printk 2515 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 2528 drivers/parport/parport_pc.c printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n"); printk 2561 drivers/parport/parport_pc.c printk(KERN_INFO printk 2582 drivers/parport/parport_pc.c printk(KERN_INFO printk 2592 drivers/parport/parport_pc.c printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n", printk 2857 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 2862 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 3114 drivers/parport/parport_pc.c printk(KERN_ERR "parport: bad specifier `%s'\n", s); printk 3136 drivers/parport/parport_pc.c printk(KERN_DEBUG printk 3204 drivers/parport/parport_pc.c printk(KERN_WARNING printk 3217 drivers/parport/parport_pc.c printk(KERN_WARNING printk 3259 drivers/parport/parport_pc.c printk(KERN_WARNING "parport=%s not understood\n", str); printk 3264 drivers/parport/parport_pc.c printk(KERN_ERR "parport=%s ignored, too many ports\n", str); printk 46 drivers/parport/parport_sunbpp.c #define dprintk(x) printk x printk 317 drivers/parport/parport_sunbpp.c printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base); printk 41 drivers/parport/probe.c printk(KERN_INFO "%s", port->name); printk 44 drivers/parport/probe.c printk (" (addr %d)", device); printk 46 drivers/parport/probe.c printk (": %s", classes[info->class].descr); printk 48 drivers/parport/probe.c printk(", %s %s", info->mfr, info->model); printk 50 drivers/parport/probe.c printk("\n"); printk 61 drivers/parport/probe.c printk(KERN_WARNING "%s probe: memory squeeze\n", port->name); printk 101 drivers/parport/probe.c printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep); printk 180 drivers/parport/probe.c printk (KERN_DEBUG "%s: reported broken Device ID" printk 204 drivers/parport/probe.c printk (KERN_DEBUG "%s: Device ID was %zd bytes" printk 217 drivers/parport/probe.c printk (KERN_DEBUG "%s: Device ID reading stopped" printk 558 drivers/parport/share.c printk(KERN_WARNING "%s: fix this legacy no-device port driver!\n", printk 724 drivers/parport/share.c printk(KERN_DEBUG "%s: no more devices allowed\n", printk 731 drivers/parport/share.c printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name); printk 792 drivers/parport/share.c printk(KERN_DEBUG printk 1000 drivers/parport/share.c printk(KERN_ERR "parport_unregister_device: passed NULL\n"); printk 1014 drivers/parport/share.c printk(KERN_DEBUG "%s: %s forgot to release port\n", printk 1141 drivers/parport/share.c printk(KERN_INFO "%s: %s already owner\n", printk 1162 drivers/parport/share.c printk(KERN_WARNING printk 1264 drivers/parport/share.c printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", dev->name); printk 1288 drivers/parport/share.c printk(KERN_DEBUG "%s: didn't sleep in parport_claim_or_block()\n", printk 1295 drivers/parport/share.c printk(KERN_DEBUG "%s: exiting parport_claim_or_block but %s owns port!\n", printk 1324 drivers/parport/share.c printk(KERN_WARNING "%s: %s tried to release parport when not owner\n", printk 1365 drivers/parport/share.c printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name); printk 24 drivers/pci/hotplug/acpi_pcihp.c #define dbg(fmt, arg...) do { if (debug_acpi) printk(KERN_DEBUG "%s: %s: " fmt, MY_NAME, __func__, ## arg); } while (0) printk 25 drivers/pci/hotplug/acpi_pcihp.c #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg) printk 26 drivers/pci/hotplug/acpi_pcihp.c #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg) printk 27 drivers/pci/hotplug/acpi_pcihp.c #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) printk 49 drivers/pci/hotplug/acpi_pcihp.c printk(KERN_ERR "%s:%s OSHP fails=0x%x\n", printk 35 drivers/pci/hotplug/cpci_hotplug_core.c printk(KERN_DEBUG "%s: " format "\n", \ printk 38 drivers/pci/hotplug/cpci_hotplug_core.c #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg) printk 39 drivers/pci/hotplug/cpci_hotplug_core.c #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg) printk 40 drivers/pci/hotplug/cpci_hotplug_core.c #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg) printk 27 drivers/pci/hotplug/cpci_hotplug_pci.c printk(KERN_DEBUG "%s: " format "\n", \ printk 30 drivers/pci/hotplug/cpci_hotplug_pci.c #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg) printk 31 drivers/pci/hotplug/cpci_hotplug_pci.c #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg) printk 32 drivers/pci/hotplug/cpci_hotplug_pci.c #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg) printk 38 drivers/pci/hotplug/cpcihp_generic.c printk(KERN_DEBUG "%s: " format "\n", \ printk 41 drivers/pci/hotplug/cpcihp_generic.c #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg) printk 42 drivers/pci/hotplug/cpcihp_generic.c #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg) printk 43 drivers/pci/hotplug/cpcihp_generic.c #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg) printk 33 drivers/pci/hotplug/cpcihp_zt5550.c printk(KERN_DEBUG "%s: " format "\n", \ printk 36 drivers/pci/hotplug/cpcihp_zt5550.c #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg) printk 37 drivers/pci/hotplug/cpcihp_zt5550.c #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg) printk 38 drivers/pci/hotplug/cpcihp_zt5550.c #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg) printk 25 drivers/pci/hotplug/cpqphp.h #define dbg(fmt, arg...) do { if (cpqhp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0) printk 26 drivers/pci/hotplug/cpqphp.h #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg) printk 27 drivers/pci/hotplug/cpqphp.h #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg) printk 28 drivers/pci/hotplug/cpqphp.h #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) printk 771 drivers/pci/hotplug/cpqphp_core.c printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n", printk 28 drivers/pci/hotplug/ibmphp.h #define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0) printk 29 drivers/pci/hotplug/ibmphp.h #define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0) printk 30 drivers/pci/hotplug/ibmphp.h #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg) printk 31 drivers/pci/hotplug/ibmphp.h #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg) printk 32 drivers/pci/hotplug/ibmphp.h #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) printk 37 drivers/pci/hotplug/pci_hotplug_core.c #define dbg(fmt, arg...) do { if (debug) printk(KERN_DEBUG "%s: %s: " fmt, MY_NAME, __func__, ## arg); } while (0) printk 38 drivers/pci/hotplug/pci_hotplug_core.c #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg) printk 39 drivers/pci/hotplug/pci_hotplug_core.c #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg) printk 40 drivers/pci/hotplug/pci_hotplug_core.c #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) printk 148 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: failed to create pci dev for %pOF\n", printk 184 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: unable to add bus %s\n", __func__, printk 190 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: unexpected header type %d, unable to add bus %s\n", printk 197 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: unable to add hotplug slot %s\n", printk 216 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: unable to remove hotplug slot %s\n", printk 246 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: unable to add hotplug slot %s\n", printk 264 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR printk 313 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_INFO "%s: slot %s added\n", DLPAR_MODULE_NAME, drc_name); printk 378 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR printk 391 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_ERR "%s: failed to unmap bus range\n", printk 448 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_INFO "%s: slot %s removed\n", DLPAR_MODULE_NAME, drc_name); printk 465 drivers/pci/hotplug/rpadlpar_core.c printk(KERN_WARNING "%s: partition not DLPAR capable\n", printk 39 drivers/pci/hotplug/rpaphp.h printk(KERN_DEBUG "%s: " format, \ printk 42 drivers/pci/hotplug/rpaphp.h #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg) printk 43 drivers/pci/hotplug/rpaphp.h #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg) printk 44 drivers/pci/hotplug/rpaphp.h #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) printk 39 drivers/pci/hotplug/shpchp.h printk(KERN_DEBUG "%s: " format, MY_NAME, ## arg); \ printk 42 drivers/pci/hotplug/shpchp.h printk(KERN_ERR "%s: " format, MY_NAME, ## arg) printk 44 drivers/pci/hotplug/shpchp.h printk(KERN_INFO "%s: " format, MY_NAME, ## arg) printk 46 drivers/pci/hotplug/shpchp.h printk(KERN_WARNING "%s: " format, MY_NAME, ## arg) printk 616 drivers/pci/pci-acpi.c printk(KERN_WARNING printk 1307 drivers/pci/pcie/aspm.c printk(KERN_INFO "PCIe ASPM is disabled\n"); printk 1310 drivers/pci/pcie/aspm.c printk(KERN_INFO "PCIe ASPM is forcibly enabled\n"); printk 2031 drivers/pci/setup-bus.c printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n", printk 265 drivers/pcmcia/db1xxx_ss.c printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n", printk 280 drivers/pcmcia/db1xxx_ss.c printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n", printk 287 drivers/pcmcia/db1xxx_ss.c printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n", printk 452 drivers/pcmcia/db1xxx_ss.c printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid); printk 494 drivers/pcmcia/db1xxx_ss.c printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n", printk 503 drivers/pcmcia/db1xxx_ss.c printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n", printk 512 drivers/pcmcia/db1xxx_ss.c printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n", printk 530 drivers/pcmcia/db1xxx_ss.c printk(KERN_ERR "pcmcia%d: cannot remap IO area\n", printk 549 drivers/pcmcia/db1xxx_ss.c printk(KERN_ERR "pcmcia%d cannot setup interrupts\n", printk 558 drivers/pcmcia/db1xxx_ss.c printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr); printk 562 drivers/pcmcia/db1xxx_ss.c printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx" printk 50 drivers/pcmcia/ds.c printk(KERN_DEBUG "pcmcia: %s lacks a requisite callback " printk 62 drivers/pcmcia/ds.c printk(KERN_DEBUG "pcmcia: %s: invalid hash for " printk 66 drivers/pcmcia/ds.c printk(KERN_DEBUG "pcmcia: see " printk 1431 drivers/pcmcia/ds.c printk(KERN_WARNING "pcmcia: bus_register error: %d\n", ret); printk 1436 drivers/pcmcia/ds.c printk(KERN_WARNING printk 95 drivers/pcmcia/i82092.c printk(KERN_ERR "i82092aa: Oops, you did something we didn't think of.\n"); printk 99 drivers/pcmcia/i82092.c printk(KERN_INFO "i82092aa: configured as a %d socket device.\n", socket_count); printk 133 drivers/pcmcia/i82092.c printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq); printk 309 drivers/pcmcia/i82092.c printk(KERN_ERR "i82092aa: infinite eventloop in interrupt \n"); printk 329 drivers/pcmcia/i82092.c printk("Card detected in socket %i!\n",i); printk 487 drivers/pcmcia/i82092.c printk("Auto power\n"); printk 491 drivers/pcmcia/i82092.c printk("Power Enabled \n"); printk 499 drivers/pcmcia/i82092.c printk("setting voltage to Vcc to 5V on socket %i\n",sock); printk 503 drivers/pcmcia/i82092.c printk("i82092aa: i82092aa_set_socket called with invalid VCC power value: %i ", state->Vcc); printk 511 drivers/pcmcia/i82092.c printk("not setting Vpp on socket %i\n",sock); printk 514 drivers/pcmcia/i82092.c printk("setting Vpp to 5.0 for socket %i\n",sock); printk 518 drivers/pcmcia/i82092.c printk("setting Vpp to 12.0\n"); printk 522 drivers/pcmcia/i82092.c printk("i82092aa: i82092aa_set_socket called with invalid VPP power value: %i ", state->Vcc); printk 624 drivers/pcmcia/i82092.c printk("invalid mem map for socket %i: %llx to %llx with a " printk 9 drivers/pcmcia/i82092aa.h #define enter(x) printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__) printk 10 drivers/pcmcia/i82092aa.h #define leave(x) printk("Leave: %s, %s line %i\n",x,__FILE__,__LINE__) printk 11 drivers/pcmcia/i82092aa.h #define dprintk(fmt, args...) printk(fmt , ## args) printk 456 drivers/pcmcia/i82365.c printk(KERN_INFO " host opts [%d]: already alive!\n", i); printk 466 drivers/pcmcia/i82365.c printk(KERN_INFO " host opts [%d]:%s\n", i, printk 539 drivers/pcmcia/i82365.c printk(KERN_INFO " ISA irqs ("); printk 541 drivers/pcmcia/i82365.c printk("scanned"); printk 547 drivers/pcmcia/i82365.c printk("default"); printk 551 drivers/pcmcia/i82365.c printk(") = "); printk 555 drivers/pcmcia/i82365.c printk("%s%d", ((mask1 & ((1<<i)-1)) ? "," : ""), i); printk 556 drivers/pcmcia/i82365.c if (mask1 == 0) printk("none!"); printk 680 drivers/pcmcia/i82365.c if (base == 0) printk("\n"); printk 681 drivers/pcmcia/i82365.c printk(KERN_INFO " %s", pcic[type].name); printk 682 drivers/pcmcia/i82365.c printk(" ISA-to-PCMCIA at port %#x ofs 0x%02x", printk 684 drivers/pcmcia/i82365.c printk(", %d socket%s\n", ns, ((ns > 1) ? "s" : "")); printk 714 drivers/pcmcia/i82365.c printk(" status change on irq %d\n", cs_irq); printk 721 drivers/pcmcia/i82365.c printk(" polling interval = %d ms\n", printk 768 drivers/pcmcia/i82365.c printk("activate failed\n"); printk 774 drivers/pcmcia/i82365.c printk("invalid resources ?\n"); printk 787 drivers/pcmcia/i82365.c printk("port conflict at %#lx\n", i365_base); printk 872 drivers/pcmcia/i82365.c printk(KERN_NOTICE "i82365: infinite loop in interrupt handler\n"); printk 1260 drivers/pcmcia/i82365.c printk(KERN_INFO "Intel ISA PCIC probe: "); printk 1266 drivers/pcmcia/i82365.c printk("not found.\n"); printk 184 drivers/pcmcia/pd6729.c printk(KERN_ERR "pd6729: infinite eventloop " printk 598 drivers/pcmcia/pd6729.c printk(KERN_INFO "pd6729: PCI card interrupts, " printk 610 drivers/pcmcia/pd6729.c printk(KERN_INFO "pd6729: ISA irqs = "); printk 613 drivers/pcmcia/pd6729.c printk("%s%d", ((mask & ((1<<i)-1)) ? "," : ""), i); printk 616 drivers/pcmcia/pd6729.c printk("none!"); printk 618 drivers/pcmcia/pd6729.c printk(" polling status changes.\n"); printk 111 drivers/pcmcia/pxa2xx_cm_x255.c printk(KERN_INFO "Registering cm-x255 PCMCIA interface.\n"); printk 90 drivers/pcmcia/pxa2xx_cm_x270.c printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n"); printk 77 drivers/pcmcia/pxa2xx_e740.c printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc); printk 71 drivers/pcmcia/pxa2xx_hx4700.c printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc); printk 100 drivers/pcmcia/pxa2xx_sharpsl.c printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr); printk 118 drivers/pcmcia/pxa2xx_sharpsl.c printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc); printk 123 drivers/pcmcia/pxa2xx_sharpsl.c printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp); printk 122 drivers/pcmcia/rsrc_nonstatic.c printk(KERN_WARNING "out of memory to update resources\n"); printk 161 drivers/pcmcia/rsrc_nonstatic.c printk(KERN_WARNING "out of memory to update resources\n"); printk 106 drivers/pcmcia/sa1100_h3600.c printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n", printk 80 drivers/pcmcia/sa1100_simpad.c printk(KERN_ERR "%s(): unrecognized Vcc %u\n", printk 63 drivers/pcmcia/sa1111_badge4.c printk(KERN_ERR printk 133 drivers/pcmcia/sa1111_badge4.c printk(KERN_INFO printk 67 drivers/pcmcia/sa1111_jornada720.c printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__, printk 109 drivers/pcmcia/sa1111_jornada720.c printk(KERN_ERR "%s(): slot cannot support VPP %u\n", printk 72 drivers/pcmcia/soc_common.c printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf); printk 581 drivers/pcmcia/soc_common.c printk(KERN_ERR "%s(): map (%d) out of range\n", __func__, printk 127 drivers/pcmcia/tcic.c printk(KERN_DEBUG "tcic_getb(%#lx) = %#x\n", tcic_base+reg, val); printk 134 drivers/pcmcia/tcic.c printk(KERN_DEBUG "tcic_getw(%#lx) = %#x\n", tcic_base+reg, val); printk 140 drivers/pcmcia/tcic.c printk(KERN_DEBUG "tcic_setb(%#lx, %#x)\n", tcic_base+reg, data); printk 146 drivers/pcmcia/tcic.c printk(KERN_DEBUG "tcic_setw(%#lx, %#x)\n", tcic_base+reg, data); printk 159 drivers/pcmcia/tcic.c printk(KERN_DEBUG "tcic_setl(%#x, %#lx)\n", tcic_base+reg, data); printk 264 drivers/pcmcia/tcic.c printk("scanned"); printk 273 drivers/pcmcia/tcic.c printk("default"); printk 276 drivers/pcmcia/tcic.c printk(") = "); printk 279 drivers/pcmcia/tcic.c printk("%s%d", ((mask1 & ((1<<i)-1)) ? "," : ""), i); printk 280 drivers/pcmcia/tcic.c printk(" "); printk 369 drivers/pcmcia/tcic.c printk(KERN_INFO "Databook TCIC-2 PCMCIA probe: "); printk 373 drivers/pcmcia/tcic.c printk("could not allocate ports,\n "); printk 395 drivers/pcmcia/tcic.c printk("not found.\n"); printk 420 drivers/pcmcia/tcic.c printk("DB86082"); break; printk 422 drivers/pcmcia/tcic.c printk("DB86082A"); break; printk 424 drivers/pcmcia/tcic.c printk("DB86084"); break; printk 426 drivers/pcmcia/tcic.c printk("DB86084A"); break; printk 428 drivers/pcmcia/tcic.c printk("DB86072"); break; printk 430 drivers/pcmcia/tcic.c printk("DB86184"); break; printk 432 drivers/pcmcia/tcic.c printk("DB86082B"); break; printk 434 drivers/pcmcia/tcic.c printk("Unknown ID 0x%02x", socket_table[0].id); printk 441 drivers/pcmcia/tcic.c printk(KERN_CONT ", %d sockets\n", sockets); printk 442 drivers/pcmcia/tcic.c printk(KERN_INFO " irq list ("); printk 474 drivers/pcmcia/tcic.c printk("sktirq is irq 11, "); printk 476 drivers/pcmcia/tcic.c printk("status change on irq %d\n", cs_irq); printk 478 drivers/pcmcia/tcic.c printk("polled status, interval = %d ms\n", printk 538 drivers/pcmcia/tcic.c printk(KERN_NOTICE "tcic: reentered interrupt handler!\n"); printk 730 drivers/pcmcia/vrc4171_card.c printk(KERN_INFO "%s, connected to IRQ %d\n", printk 519 drivers/pcmcia/vrc4173_cardu.c printk(KERN_INFO "%s at %#08lx, IRQ %d\n", socket->name, start, dev->irq); printk 291 drivers/pcmcia/xxs1500_ss.c printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n"); printk 1656 drivers/pinctrl/pinctrl-at91.c printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", printk 572 drivers/pinctrl/sirf/pinctrl-sirf.c printk(KERN_WARNING printk 593 drivers/platform/x86/dcdbas.c printk(KERN_WARNING "Please wait for shutdown " printk 116 drivers/platform/x86/dell_rbu.c printk(KERN_WARNING printk 144 drivers/platform/x86/dell_rbu.c printk(KERN_WARNING printk 157 drivers/platform/x86/dell_rbu.c printk(KERN_WARNING printk 229 drivers/platform/x86/dell_rbu.c printk(KERN_WARNING printk 410 drivers/platform/x86/dell_rbu.c printk(KERN_ERR "dell_rbu:%s: corruption " printk 465 drivers/platform/x86/dell_rbu.c printk(KERN_WARNING "dell_rbu:read_packet_data: " printk 605 drivers/platform/x86/dell_rbu.c printk(KERN_ERR printk 615 drivers/platform/x86/dell_rbu.c printk(KERN_WARNING "dell_rbu: image_type is invalid\n"); printk 681 drivers/platform/x86/dell_rbu.c printk(KERN_ERR printk 231 drivers/platform/x86/hdaps.c printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n", printk 299 drivers/platform/x86/hp_accel.c printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n"); printk 41 drivers/platform/x86/mxm-wmi.c printk("calling mux switch %d\n", adapter); printk 49 drivers/platform/x86/mxm-wmi.c printk("mux switched %d\n", status); printk 66 drivers/platform/x86/mxm-wmi.c printk("calling mux switch %d\n", adapter); printk 74 drivers/platform/x86/mxm-wmi.c printk("mux mutex set switched %d\n", status); printk 1340 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG "This computer supports SABI==%x\n", printk 1343 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG "SABI header:\n"); printk 1344 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", printk 1346 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", printk 1348 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", printk 1350 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", printk 1352 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SABI data offset = 0x%04x\n", printk 1354 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SABI data segment = 0x%04x\n", printk 1357 drivers/platform/x86/samsung-laptop.c printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP); printk 90 drivers/platform/x86/samsung-q10.c printk(KERN_INFO KBUILD_MODNAME ": found model '%s'\n", id->ident); printk 401 drivers/platform/x86/thinkpad_acpi.c printk(KERN_DEBUG pr_fmt("%s: " format), \ printk 416 drivers/platform/x86/thinkpad_acpi.c printk(KERN_DEBUG pr_fmt("%s: access by process with PID %d\n"), printk 424 drivers/platform/x86/thinkpad_acpi.c printk(KERN_DEBUG pr_fmt("%s: PID %d: " format), \ printk 40 drivers/pnp/core.c printk(KERN_ERR "pnp: Out of Memory\n"); printk 983 drivers/pnp/isapnp/core.c printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n"); printk 992 drivers/pnp/isapnp/core.c printk(KERN_ERR "isapnp: Index Register 0x%x already used\n", printk 998 drivers/pnp/isapnp/core.c printk(KERN_ERR printk 1015 drivers/pnp/isapnp/core.c printk(KERN_INFO "isapnp: Scanning for PnP cards...\n"); printk 1019 drivers/pnp/isapnp/core.c printk(KERN_ERR printk 1037 drivers/pnp/isapnp/core.c printk(KERN_INFO printk 1060 drivers/pnp/isapnp/core.c printk(KERN_INFO printk 1064 drivers/pnp/isapnp/core.c printk(KERN_INFO "isapnp: No Plug & Play card found\n"); printk 303 drivers/pnp/pnpacpi/core.c printk(KERN_INFO "pnp: PnP ACPI: disabled\n"); printk 306 drivers/pnp/pnpacpi/core.c printk(KERN_INFO "pnp: PnP ACPI init\n"); printk 309 drivers/pnp/pnpacpi/core.c printk(KERN_INFO "pnp: PnP ACPI: found %d devices\n", num); printk 143 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 145 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 147 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 158 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: function successful\n", module); printk 161 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: unable to set static resources\n", printk 165 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: invalid function number passed\n", printk 169 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 174 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: invalid handle\n", module); printk 177 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: invalid parameters were passed\n", printk 181 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: unable to set resources\n", printk 185 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: no events are pending\n", module); printk 188 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: the system is not docked\n", printk 192 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 197 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 202 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 207 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR printk 212 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: the buffer passed is too small\n", printk 216 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: use ESCD instead\n", module); printk 219 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: the message is unsupported\n", printk 223 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occurred\n", printk 227 drivers/pnp/pnpbios/bioscalls.c printk(KERN_ERR "PnPBIOS: %s: unexpected status 0x%x\n", module, printk 172 drivers/pnp/pnpbios/core.c printk(KERN_WARNING "PnPBIOS: disabling dock monitoring.\n"); printk 179 drivers/pnp/pnpbios/core.c printk(KERN_INFO printk 260 drivers/pnp/pnpbios/core.c printk(KERN_ERR printk 375 drivers/pnp/pnpbios/core.c printk(KERN_ERR printk 384 drivers/pnp/pnpbios/core.c printk(KERN_INFO printk 431 drivers/pnp/pnpbios/core.c printk(KERN_INFO "PnPBIOS: Scanning system for PnP BIOS support...\n"); printk 443 drivers/pnp/pnpbios/core.c printk(KERN_INFO printk 448 drivers/pnp/pnpbios/core.c printk(KERN_ERR printk 455 drivers/pnp/pnpbios/core.c printk(KERN_ERR printk 460 drivers/pnp/pnpbios/core.c printk(KERN_WARNING printk 466 drivers/pnp/pnpbios/core.c printk(KERN_INFO printk 475 drivers/pnp/pnpbios/core.c printk(KERN_INFO "PnPBIOS: PnP BIOS support was not detected.\n"); printk 481 drivers/pnp/pnpbios/core.c printk(KERN_WARNING "%s detected. Disabling PnPBIOS\n", d->ident); printk 513 drivers/pnp/pnpbios/core.c printk(KERN_INFO "PnPBIOS: Disabled\n"); printk 520 drivers/pnp/pnpbios/core.c printk(KERN_INFO "PnPBIOS: Disabled by ACPI PNP\n"); printk 535 drivers/pnp/pnpbios/core.c printk(KERN_ERR printk 543 drivers/pnp/pnpbios/core.c printk(KERN_ERR printk 551 drivers/pnp/pnpbios/core.c printk(KERN_ERR "PnPBIOS: Failed to create proc interface.\n"); printk 76 drivers/pnp/pnpbios/proc.c printk(KERN_ERR printk 95 drivers/pnp/pnpbios/proc.c printk(KERN_ERR "PnPBIOS: %s: ESCD size reported by" printk 141 drivers/pnp/pnpbios/proc.c printk(KERN_ERR printk 166 drivers/power/supply/apm_power.c printk(KERN_ERR "Unsupported source: %d\n", source); printk 247 drivers/power/supply/apm_power.c printk(KERN_ERR "Unsupported source: %d\n", source); printk 360 drivers/power/supply/apm_power.c printk(KERN_INFO "APM Battery Driver\n"); printk 160 drivers/power/supply/collie_battery.c printk(KERN_NOTICE "%s not present\n", psy->desc->name); printk 664 drivers/power/supply/olpc_battery.c printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " printk 164 drivers/power/supply/tosa_battery.c printk(KERN_NOTICE "%s not present\n", psy->desc->name); printk 163 drivers/ps3/ps3av.c printk(KERN_ERR printk 197 drivers/ps3/ps3av.c printk(KERN_ERR "%s: ps3_vuart_read failed %d\n", printk 310 drivers/ps3/ps3av.c printk(KERN_ERR printk 320 drivers/ps3/ps3av.c printk(KERN_ERR "%s: put_return_status() failed (result=%d)\n", printk 330 drivers/ps3/ps3av.c printk(KERN_ERR "%s: failed cid:%x res:%d\n", __func__, cid, res); printk 521 drivers/ps3/ps3av.c printk(KERN_WARNING printk 845 drivers/ps3/ps3av.c printk(KERN_ERR "%s: invalid id :%d\n", __func__, id); printk 882 drivers/ps3/ps3av.c printk(KERN_ERR "%s: invalid mode %d\n", __func__, id); printk 966 drivers/ps3/ps3av.c printk(KERN_ERR "%s: ps3av_cmd_init failed %d\n", __func__, printk 977 drivers/ps3/ps3av.c printk(KERN_ERR "%s: invalid id :%d\n", __func__, id); printk 1038 drivers/ps3/ps3av.c printk(KERN_ERR printk 160 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_VIDEO_INIT: failed %x\n", res); printk 174 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AUDIO_INIT: failed %x\n", res); printk 189 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_INIT: failed %x\n", res); printk 208 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_FIN: failed %x\n", res); printk 236 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_VIDEO_MUTE: failed %x\n", res); printk 257 drivers/ps3/ps3av_cmd.c printk(KERN_ERR printk 280 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_TV_MUTE: failed %x port:%x\n", printk 302 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_ENABLE_EVENT: failed %x\n", res); printk 322 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_HDMI_MODE: failed %x\n", res); printk 430 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_VIDEO_FORMAT: failed %x\n", res); printk 460 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_AUDIO_MUTE: failed %x\n", res); printk 485 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "%s failed, fs:%x\n", __func__, fs); printk 533 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "%s failed, vid:%x\n", __func__, video_vid); printk 538 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "%s failed, fs:%x\n", __func__, fs); printk 559 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "%s failed, source:%x\n", __func__, source); printk 586 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "%s failed, word_bits:%x\n", __func__, printk 596 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "%s failed, num_of_ch:%x\n", __func__, printk 794 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AUDIO_MODE: failed %x\n", res); printk 823 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AUDIO_MUTE: failed %x\n", res); printk 846 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AUDIO_ACTIVE:%x failed %x\n", cid, printk 887 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_GET_HW_CONF: failed %x\n", res); printk 909 drivers/ps3/ps3av_cmd.c printk(KERN_ERR "PS3AV_CID_AV_GET_MONITOR_INFO: failed %x\n", printk 203 drivers/rapidio/rio-scan.c printk(KERN_INFO printk 213 drivers/rapidio/rio-scan.c printk(KERN_INFO printk 949 drivers/rapidio/rio-scan.c printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, printk 963 drivers/rapidio/rio-scan.c printk(KERN_INFO printk 974 drivers/rapidio/rio-scan.c printk(KERN_ERR "RIO: failed to allocate new net\n"); printk 993 drivers/rapidio/rio-scan.c printk(KERN_INFO printk 1006 drivers/rapidio/rio-scan.c printk(KERN_INFO "RIO: master port %d link inactive\n", printk 1064 drivers/rapidio/rio-scan.c printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id, printk 1091 drivers/rapidio/rio-scan.c printk(KERN_ERR "RIO: Failed to allocate new net\n"); printk 1103 drivers/rapidio/rio-scan.c printk(KERN_INFO printk 5508 drivers/s390/block/dasd_eckd.c printk(KERN_ERR "%s", page); printk 5520 drivers/s390/block/dasd_eckd.c printk(KERN_ERR "%s", page); printk 5543 drivers/s390/block/dasd_eckd.c printk(KERN_ERR "%s", page); printk 5678 drivers/s390/block/dasd_eckd.c printk(KERN_ERR "%s", page); printk 707 drivers/s390/block/dasd_fba.c printk(KERN_ERR "%s", page); printk 727 drivers/s390/block/dasd_fba.c printk(KERN_ERR "%s", page); printk 768 drivers/s390/block/dasd_fba.c printk(KERN_ERR "%s", page); printk 133 drivers/s390/block/dasd_int.h printk(d_loglevel PRINTK_HEADER " %s: " d_string "\n", \ printk 140 drivers/s390/block/dasd_int.h printk(d_loglevel PRINTK_HEADER " " d_string "\n", d_args); \ printk 147 drivers/s390/block/dasd_int.h printk(d_loglevel PRINTK_HEADER " %s: " d_string "\n", \ printk 153 drivers/s390/block/dasd_int.h printk(d_loglevel PRINTK_HEADER " " d_string "\n", d_args); \ printk 162 drivers/s390/char/tape_3590.c printk("Invalid KEKL number: %d\n", in->count); printk 81 drivers/s390/cio/crw.c printk(KERN_WARNING"%s: Code does not support more " printk 85 drivers/s390/cio/crw.c printk(KERN_WARNING"%s: crw reports slct=%d, oflw=%d, " printk 90 drivers/s390/cio/crw.c printk(KERN_WARNING"%s: This was crw number %x in the " printk 100 drivers/s390/cio/crw.c printk(KERN_DEBUG "crw_info : CRW reports slct=%d, oflw=%d, " printk 50 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: ccw device timeout occurred at %llx, " printk 52 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: orb:\n"); printk 55 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: ccw device bus id: %s\n", printk 57 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: subchannel bus id: %s\n", printk 59 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: subchannel lpm: %02x, opm: %02x, " printk 63 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: orb indicates transport mode\n"); printk 64 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: last tcw:\n"); printk 69 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: orb indicates command mode\n"); printk 74 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: last channel program " printk 77 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: last channel program:\n"); printk 83 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: ccw device state: %d\n", printk 85 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: store subchannel returned: cc=%d\n", cc); printk 86 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: schib:\n"); printk 89 drivers/s390/cio/device_fsm.c printk(KERN_WARNING "cio: ccw device flags:\n"); printk 536 drivers/s390/cio/qdio_setup.c printk(KERN_INFO "%s", s); printk 41 drivers/s390/net/ctcm_main.h #define ctcm_pr_debug(fmt, arg...) printk(KERN_DEBUG fmt, ##arg) printk 46 drivers/s390/net/ctcm_main.h printk(KERN_DEBUG fmt, ##arg); \ printk 52 drivers/s390/net/ctcm_main.h printk(KERN_DEBUG fmt, ##arg); \ printk 107 drivers/s390/net/ctcm_sysfs.c printk(KERN_INFO "Statistics for %s:\n%s", printk 27 drivers/s390/net/fsm.c printk(KERN_WARNING printk 36 drivers/s390/net/fsm.c printk(KERN_WARNING printk 49 drivers/s390/net/fsm.c printk(KERN_WARNING printk 59 drivers/s390/net/fsm.c printk(KERN_ERR printk 82 drivers/s390/net/fsm.c printk(KERN_WARNING printk 96 drivers/s390/net/fsm.c printk(KERN_DEBUG "fsm(%s): History:\n", fi->name); printk 102 drivers/s390/net/fsm.c printk(KERN_DEBUG " S=%s\n", printk 105 drivers/s390/net/fsm.c printk(KERN_DEBUG " S=%s E=%s\n", printk 137 drivers/s390/net/fsm.c printk(KERN_DEBUG "fsm(%s): Timer %p expired\n", printk 148 drivers/s390/net/fsm.c printk(KERN_DEBUG "fsm(%s): Create timer %p\n", fi->name, printk 158 drivers/s390/net/fsm.c printk(KERN_DEBUG "fsm(%s): Delete timer %p\n", this->fi->name, printk 169 drivers/s390/net/fsm.c printk(KERN_DEBUG "fsm(%s): Add timer %p %dms\n", printk 187 drivers/s390/net/fsm.c printk(KERN_DEBUG "fsm(%s): Restart timer %p %dms\n", printk 151 drivers/s390/net/fsm.h printk(KERN_ERR "fsm(%s): Invalid state st(%ld/%ld) ev(%d/%ld)\n", printk 162 drivers/s390/net/fsm.h printk(KERN_DEBUG "fsm(%s): state %s event %s\n", printk 173 drivers/s390/net/fsm.h printk(KERN_DEBUG "fsm(%s): no function for event %s in state %s\n", printk 199 drivers/s390/net/fsm.h printk(KERN_DEBUG "fsm(%s): New state %s\n", fi->name, printk 130 drivers/s390/net/smsgiucv.c printk(KERN_WARNING "smsg_pm_freeze\n"); printk 144 drivers/s390/net/smsgiucv.c printk(KERN_WARNING "smsg_pm_restore_thaw\n"); printk 154 drivers/s390/net/smsgiucv.c printk(KERN_ERR printk 107 drivers/sbus/char/bbc_envctrl.c printk("fan%d: Changed fan speed to cpu(%02x) sys(%02x)\n", printk 131 drivers/sbus/char/bbc_envctrl.c printk("temp%d: cpu(%d C) amb(%d C)\n", printk 157 drivers/sbus/char/bbc_envctrl.c printk(KERN_CRIT "temp%d: Outside of safe %s " printk 161 drivers/sbus/char/bbc_envctrl.c printk(KERN_CRIT "kenvctrld: Shutting down the system now.\n"); printk 176 drivers/sbus/char/bbc_envctrl.c printk(KERN_WARNING "temp%d: " printk 182 drivers/sbus/char/bbc_envctrl.c printk(KERN_WARNING "temp%d: " printk 231 drivers/sbus/char/bbc_envctrl.c printk(KERN_WARNING "temp%d: " printk 237 drivers/sbus/char/bbc_envctrl.c printk(KERN_WARNING "temp%d: " printk 422 drivers/sbus/char/bbc_envctrl.c printk(KERN_INFO "bbc_envctrl: kenvctrld starting...\n"); printk 439 drivers/sbus/char/bbc_envctrl.c printk(KERN_INFO "bbc_envctrl: kenvctrld exiting...\n"); printk 344 drivers/sbus/char/bbc_i2c.c printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n", printk 188 drivers/sbus/char/display7seg.c printk(KERN_ERR PFX "Cannot map chip registers\n"); printk 194 drivers/sbus/char/display7seg.c printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n", printk 215 drivers/sbus/char/display7seg.c printk(KERN_INFO PFX "7-Segment Display%pOF at [%s:0x%llx] %s\n", printk 199 drivers/sbus/char/envctrl.c printk(KERN_INFO PFX "Pin status will not clear.\n"); printk 217 drivers/sbus/char/envctrl.c printk(KERN_INFO PFX "Busy bit will not clear.\n"); printk 887 drivers/sbus/char/envctrl.c printk(KERN_ERR PFX "Failed to allocate table.\n"); printk 892 drivers/sbus/char/envctrl.c printk(KERN_ERR PFX "Failed to get table.\n"); printk 981 drivers/sbus/char/envctrl.c printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n"); printk 995 drivers/sbus/char/envctrl.c printk(KERN_ERR PFX printk 1002 drivers/sbus/char/envctrl.c printk(KERN_INFO PFX "%s starting...\n", current->comm); printk 1014 drivers/sbus/char/envctrl.c printk(KERN_CRIT printk 1024 drivers/sbus/char/envctrl.c printk(KERN_INFO PFX "%s exiting...\n", current->comm); printk 1069 drivers/sbus/char/envctrl.c printk(KERN_ERR PFX "Unable to get misc minor %d\n", printk 1078 drivers/sbus/char/envctrl.c printk(KERN_INFO PFX "Initialized "); printk 1080 drivers/sbus/char/envctrl.c printk("[%s 0x%lx]%s", printk 185 drivers/sbus/char/flash.c printk(KERN_INFO "%pOF: OBP Flash, RD %lx[%lx] WR %lx[%lx]\n", printk 347 drivers/sbus/char/openprom.c printk(KERN_INFO "openprom_sunos_ioctl: unimplemented ioctl\n"); printk 352 drivers/sbus/char/openprom.c printk(KERN_INFO "openprom_sunos_ioctl: cmd 0x%X, arg 0x%lX\n", cmd, arg); printk 30 drivers/sbus/char/uctrl.c #define dprintk(x) printk x printk 357 drivers/sbus/char/uctrl.c printk(KERN_ERR "uctrl: Unable to allocate device struct.\n"); printk 365 drivers/sbus/char/uctrl.c printk(KERN_ERR "uctrl: Unable to map registers.\n"); printk 372 drivers/sbus/char/uctrl.c printk(KERN_ERR "uctrl: Unable to register irq.\n"); printk 378 drivers/sbus/char/uctrl.c printk(KERN_ERR "uctrl: Unable to register misc device.\n"); printk 383 drivers/sbus/char/uctrl.c printk(KERN_INFO "%pOF: uctrl regs[0x%p] (irq %d)\n", printk 411 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", printk 722 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n", printk 1001 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n", printk 1010 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s:%s.\n", printk 1946 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no); printk 1952 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: Shutdown complete.\n"); printk 2104 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%lx, IRQ: %d.\n", printk 2106 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: scsi%d: Firmware %s, BIOS %s, Ports: %d.\n", printk 2201 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: Suspending host %d.\n", tw_dev->host->host_no); printk 2213 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: Suspend complete.\n"); printk 2231 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no); printk 2275 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3w-9xxx: Resume complete.\n"); printk 2316 drivers/scsi/3w-9xxx.c printk(KERN_WARNING "3ware 9000 Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); printk 463 drivers/scsi/3w-9xxx.h printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \ printk 465 drivers/scsi/3w-9xxx.h printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \ printk 257 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", printk 795 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n", printk 878 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n", printk 885 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n", printk 1503 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no); printk 1509 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: Shutdown complete.\n"); printk 1643 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n", printk 1654 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n", printk 1766 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no); printk 1776 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: Suspend complete.\n"); printk 1796 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no); printk 1840 drivers/scsi/3w-sas.c printk(KERN_WARNING "3w-sas: Resume complete.\n"); printk 1874 drivers/scsi/3w-sas.c printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); printk 193 drivers/scsi/3w-sas.h printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \ printk 195 drivers/scsi/3w-sas.h printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \ printk 267 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host); printk 272 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host); printk 278 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host); printk 283 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host); printk 289 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host); printk 409 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid)); printk 558 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n"); printk 571 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n"); printk 576 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n"); printk 586 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n"); printk 599 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n"); printk 615 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n"); printk 624 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no); printk 629 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8); printk 632 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]); printk 635 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen); printk 658 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no); printk 699 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n"); printk 712 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n"); printk 718 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n"); printk 728 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n"); printk 746 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n"); printk 778 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); printk 785 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n"); printk 790 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8); printk 792 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); printk 795 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen); printk 820 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n"); printk 840 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: dma_alloc_coherent() failed.\n"); printk 845 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n"); printk 864 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n"); printk 994 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd); printk 997 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no); printk 1091 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n"); printk 1107 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n"); printk 1121 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n"); printk 1146 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n"); printk 1161 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n"); printk 1176 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n"); printk 1190 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n"); printk 1216 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no); printk 1223 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no); printk 1233 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no); printk 1239 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no); printk 1245 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n"); printk 1261 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n"); printk 1268 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n"); printk 1331 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no); printk 1389 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no); printk 1412 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n"); printk 1425 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n"); printk 1435 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n"); printk 1443 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n"); printk 1481 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n"); printk 1519 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n"); printk 1534 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n"); printk 1545 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n"); printk 1553 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n"); printk 1574 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n"); printk 1666 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n"); printk 1712 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n"); printk 1819 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n"); printk 1834 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n"); printk 1857 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n"); printk 1870 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n"); printk 1880 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n"); printk 1888 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n"); printk 1908 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n"); printk 1978 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n"); printk 1981 drivers/scsi/3w-xxxx.c printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command); printk 2050 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no); printk 2062 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no); printk 2105 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no); printk 2119 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no); printk 2155 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n"); printk 2206 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no); printk 2210 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n"); printk 2212 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n"); printk 2264 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to enable pci device."); printk 2272 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to set dma mask."); printk 2278 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension."); printk 2289 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension."); printk 2297 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to get mem region."); printk 2304 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to get io address."); printk 2327 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi add host failed"); printk 2333 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq); printk 2338 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Error requesting IRQ."); printk 2353 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3w-xxxx: Failed to register character device."); printk 2420 drivers/scsi/3w-xxxx.c printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); printk 275 drivers/scsi/3w-xxxx.h #define dprintk(msg...) printk(msg) printk 246 drivers/scsi/53c700.c printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_MIN_PERIOD*4); printk 251 drivers/scsi/53c700.c printk(KERN_WARNING "53c700: Offset %d exceeds chip maximum, setting to %d\n", printk 289 drivers/scsi/53c700.c printk(KERN_ERR "53c700: Failed to allocate memory for driver, detaching\n"); printk 369 drivers/scsi/53c700.c printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n"); printk 372 drivers/scsi/53c700.c printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no, printk 459 drivers/scsi/53c700.c printk("RESIDUAL IS %d (ddir %d)\n", count, ddir); printk 500 drivers/scsi/53c700.c printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_700_COMMAND_SLOTS_PER_HOST); printk 506 drivers/scsi/53c700.c printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n"); printk 529 drivers/scsi/53c700.c printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot); printk 532 drivers/scsi/53c700.c printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot); printk 601 drivers/scsi/53c700.c printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n", printk 610 drivers/scsi/53c700.c printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n"); printk 691 drivers/scsi/53c700.c printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driven at\n", hostdata->clock); printk 817 drivers/scsi/53c700.c printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n", printk 828 drivers/scsi/53c700.c printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ", printk 832 drivers/scsi/53c700.c printk("\n"); printk 860 drivers/scsi/53c700.c printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun, printk 863 drivers/scsi/53c700.c printk("\n"); printk 901 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no, printk 906 drivers/scsi/53c700.c printk(KERN_INFO "scsi%d (%d:%d) SIMPLE TAG %d %s\n", host->host_no, printk 912 drivers/scsi/53c700.c printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ", printk 917 drivers/scsi/53c700.c printk("\n"); printk 972 drivers/scsi/53c700.c printk(" cmd %p has status %d, requesting sense\n", printk 1058 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n", printk 1061 drivers/scsi/53c700.c printk(KERN_ERR " msg begins %02x %02x\n", printk 1069 drivers/scsi/53c700.c printk("scsi%d: (%d:%d), DISCONNECTED (%d) %s\n", printk 1089 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n", printk 1098 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n", printk 1120 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n", printk 1126 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n", printk 1176 drivers/scsi/53c700.c printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n", printk 1189 drivers/scsi/53c700.c printk(KERN_INFO "IDENTIFIED SG segment as being %08x in slot %p, cmd %p, slot->resume_offset=%08x\n", SG, &hostdata->slots[i], hostdata->slots[i].cmnd, hostdata->slots[i].resume_offset); printk 1202 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no); printk 1205 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n", printk 1234 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n", printk 1242 drivers/scsi/53c700.c printk(KERN_INFO " SG[%d].length = %d, move_insn=%08x, addr %08x\n", i, sg->length, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].ins, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].pAddr); printk 1247 drivers/scsi/53c700.c printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n", printk 1251 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n", printk 1525 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n", printk 1544 drivers/scsi/53c700.c printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n", printk 1581 drivers/scsi/53c700.c printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG))); printk 1593 drivers/scsi/53c700.c printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x\n", printk 1598 drivers/scsi/53c700.c printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x, residual %d\n", printk 1619 drivers/scsi/53c700.c printk("scsi%d (%d:%d) transfer mismatch pAddr=%lx, naddr=%lx, data_transfer=%d, residual=%d\n", host->host_no, pun, lun, (unsigned long)pAddr, (unsigned long)naddr, data_transfer, residual); printk 1637 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n", printk 1643 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n", printk 1647 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n", printk 1655 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n" printk 1661 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n", printk 1696 drivers/scsi/53c700.c printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n", printk 1748 drivers/scsi/53c700.c printk(KERN_WARNING "scsi%d: Command depth has gone over queue depth\n", SCp->device->host->host_no); printk 1784 drivers/scsi/53c700.c printk("53c700: scsi%d, command ", SCp->device->host->host_no); printk 1824 drivers/scsi/53c700.c printk("53c700: Command"); printk 1826 drivers/scsi/53c700.c printk("Has wrong data direction %d\n", SCp->sc_data_direction); printk 1841 drivers/scsi/53c700.c printk(KERN_ERR "53c700: Unknown command for data direction "); printk 25 drivers/scsi/53c700.h #define DEBUG(x) printk x printk 2499 drivers/scsi/BusLogic.c printk(KERN_WARNING printk 2514 drivers/scsi/BusLogic.c printk(KERN_WARNING printk 3596 drivers/scsi/BusLogic.c printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf); printk 3602 drivers/scsi/BusLogic.c printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf); printk 3604 drivers/scsi/BusLogic.c printk("%s", buf); printk 3608 drivers/scsi/BusLogic.c printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf); printk 3610 drivers/scsi/BusLogic.c printk("%s%s", blogic_msglevelmap[msglevel], buf); printk 3612 drivers/scsi/BusLogic.c printk("%s", buf); printk 294 drivers/scsi/NCR5380.c printk(KERN_DEBUG "SR = 0x%02x : ", status); printk 297 drivers/scsi/NCR5380.c printk(KERN_CONT "%s, ", signals[i].name); printk 298 drivers/scsi/NCR5380.c printk(KERN_CONT "\nBASR = 0x%02x : ", basr); printk 301 drivers/scsi/NCR5380.c printk(KERN_CONT "%s, ", basrs[i].name); printk 302 drivers/scsi/NCR5380.c printk(KERN_CONT "\nICR = 0x%02x : ", icr); printk 305 drivers/scsi/NCR5380.c printk(KERN_CONT "%s, ", icrs[i].name); printk 306 drivers/scsi/NCR5380.c printk(KERN_CONT "\nMR = 0x%02x : ", mr); printk 309 drivers/scsi/NCR5380.c printk(KERN_CONT "%s, ", mrs[i].name); printk 310 drivers/scsi/NCR5380.c printk(KERN_CONT "\n"); printk 2083 drivers/scsi/NCR5380.c printk("\n"); printk 251 drivers/scsi/NCR5380.h printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0) printk 623 drivers/scsi/a100u2w.c printk(KERN_ERR "Unable to Reset - No SCB Found\n"); printk 891 drivers/scsi/a100u2w.c printk("max cdb length= %x\n", cmd->cmd_len); printk 998 drivers/scsi/a100u2w.c printk(KERN_ERR "inia100_scb_handler: SRB pointer is empty\n"); printk 1034 drivers/scsi/a100u2w.c printk(KERN_DEBUG "inia100: %x %x\n", scb->hastat, scb->tastat); printk 1097 drivers/scsi/a100u2w.c printk(KERN_WARNING "Unable to set 32bit DMA " printk 1106 drivers/scsi/a100u2w.c printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port); printk 1129 drivers/scsi/a100u2w.c printk("inia100: SCB memory allocation error\n"); printk 1138 drivers/scsi/a100u2w.c printk("inia100: ESCB memory allocation error\n"); printk 1146 drivers/scsi/a100u2w.c printk("inia100: initial orchid fail!!\n"); printk 1164 drivers/scsi/a100u2w.c printk(KERN_WARNING "inia100: unable to get irq %d\n", printk 382 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n"); printk 394 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n"); printk 423 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING printk 513 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n"); printk 604 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status); printk 1133 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status); printk 2133 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", printk 2143 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", printk 2148 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n", printk 2155 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: serial %s", printk 2158 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: TSID %.*s\n", printk 2167 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: Reset Adapter Ignored\n", printk 2197 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n", printk 2203 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id); printk 2211 drivers/scsi/aacraid/aachba.c printk(KERN_INFO "%s%d: 64bit support enabled.\n", printk 2352 drivers/scsi/aacraid/aachba.c printk(KERN_DEBUG printk 2388 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "io_callback: io failed, status = %d\n", printk 2496 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status); printk 2588 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status); printk 2623 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING printk 2755 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING printk 3854 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status); printk 3940 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", printk 3984 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", printk 4032 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", printk 4113 drivers/scsi/aacraid/aachba.c printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", printk 89 drivers/scsi/aacraid/comminit.c printk(KERN_ERR "aacraid: unable to create mapping.\n"); printk 582 drivers/scsi/aacraid/comminit.c printk(KERN_WARNING printk 635 drivers/scsi/aacraid/comminit.c printk(KERN_ERR "Error could not allocate comm region.\n"); printk 295 drivers/scsi/aacraid/commsup.c printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n", printk 394 drivers/scsi/aacraid/commsup.c printk(KERN_WARNING "Queue %d full, %u outstanding.\n", printk 427 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "GetEntries failed\n"); printk 585 drivers/scsi/aacraid/commsup.c printk(KERN_INFO "No management Fibs Available:%d\n", printk 621 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "aac_fib_send: returned -EBUSY\n"); printk 653 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "aacraid: aac_fib_send: first asynchronous command timed out.\n" printk 666 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "aacraid: aac_fib_send: adapter blinkLED 0x%x.\n" printk 927 drivers/scsi/aacraid/commsup.c printk(KERN_WARNING "aac_fib_adapter_complete: " printk 1018 drivers/scsi/aacraid/commsup.c printk(KERN_WARNING "%s:%s", dev->name, cp); printk 1020 drivers/scsi/aacraid/commsup.c printk(KERN_INFO "%s:%s", dev->name, cp); printk 1820 drivers/scsi/aacraid/commsup.c printk(KERN_WARNING "aifd: didn't allocate NewFib.\n"); printk 1830 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "%s: Host adapter is dead (or got a PCI error) %d\n", printk 1835 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED); printk 2547 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n", printk 2565 drivers/scsi/aacraid/commsup.c printk(KERN_ERR "%s%d: Interrupt unavailable.\n", printk 1696 drivers/scsi/aacraid/linit.c printk(KERN_INFO "%s%d: Sync. mode enforced " printk 1702 drivers/scsi/aacraid/linit.c printk(KERN_INFO "%s%d: Async. mode not supported " printk 1714 drivers/scsi/aacraid/linit.c printk(KERN_ERR "aacraid: Unable to create command thread.\n"); printk 1915 drivers/scsi/aacraid/linit.c printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id); printk 2105 drivers/scsi/aacraid/linit.c printk(KERN_INFO "Adaptec %s driver %s\n", printk 469 drivers/scsi/aacraid/rx.c printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n", printk 542 drivers/scsi/aacraid/rx.c printk(KERN_WARNING "%s: unable to map adapter.\n", name); printk 575 drivers/scsi/aacraid/rx.c printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); printk 582 drivers/scsi/aacraid/rx.c printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); printk 594 drivers/scsi/aacraid/rx.c printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", printk 642 drivers/scsi/aacraid/rx.c printk(KERN_ERR "%s%d: Interrupt unavailable.\n", printk 335 drivers/scsi/aacraid/sa.c printk(KERN_WARNING "%s: unable to map adapter.\n", name); printk 343 drivers/scsi/aacraid/sa.c printk(KERN_WARNING "%s%d: adapter self-test failed.\n", name, instance); printk 350 drivers/scsi/aacraid/sa.c printk(KERN_WARNING "%s%d: adapter kernel panic'd.\n", name, instance); printk 360 drivers/scsi/aacraid/sa.c printk(KERN_WARNING "%s%d: adapter kernel failed to start, init status = %lx.\n", printk 379 drivers/scsi/aacraid/sa.c printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", printk 875 drivers/scsi/aacraid/src.c printk(KERN_WARNING "%s: unable to map adapter.\n", name); printk 904 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter self-test failed.\n", printk 912 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter monitor panic.\n", printk 925 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", printk 981 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: Interrupt unavailable.\n", printk 1167 drivers/scsi/aacraid/src.c printk(KERN_WARNING "%s: unable to map adapter.\n", name); printk 1193 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter flash update failed.\n", printk 1220 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); printk 1227 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); printk 1243 drivers/scsi/aacraid/src.c printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", printk 2112 drivers/scsi/advansys.c printk("advansys: "); \ printk 2113 drivers/scsi/advansys.c printk(s); \ printk 2118 drivers/scsi/advansys.c printk("advansys: "); \ printk 2119 drivers/scsi/advansys.c printk((s), (a1)); \ printk 2124 drivers/scsi/advansys.c printk("advansys: "); \ printk 2125 drivers/scsi/advansys.c printk((s), (a1), (a2)); \ printk 2130 drivers/scsi/advansys.c printk("advansys: "); \ printk 2131 drivers/scsi/advansys.c printk((s), (a1), (a2), (a3)); \ printk 2136 drivers/scsi/advansys.c printk("advansys: "); \ printk 2137 drivers/scsi/advansys.c printk((s), (a1), (a2), (a3), (a4)); \ printk 2164 drivers/scsi/advansys.c printk(KERN_DEBUG "%s: %s: " format, DRV_NAME, \ printk 2307 drivers/scsi/advansys.c printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong)h); printk 2309 drivers/scsi/advansys.c printk(" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl " printk 2312 drivers/scsi/advansys.c printk(" bus_type %d, init_sdtr 0x%x,\n", h->bus_type, printk 2315 drivers/scsi/advansys.c printk(" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, " printk 2320 drivers/scsi/advansys.c printk(" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait " printk 2324 drivers/scsi/advansys.c printk(" is_in_int %u, max_total_qng %u, cur_total_qng %u, " printk 2329 drivers/scsi/advansys.c printk(" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, " printk 2334 drivers/scsi/advansys.c printk(" cfg 0x%lx\n", (ulong)h->cfg); printk 2342 drivers/scsi/advansys.c printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong)h); printk 2344 drivers/scsi/advansys.c printk(" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n", printk 2346 drivers/scsi/advansys.c printk(" disc_enable 0x%x, sdtr_enable 0x%x,\n", printk 2349 drivers/scsi/advansys.c printk(" chip_scsi_id %d, isa_dma_speed %d, isa_dma_channel %d, " printk 2353 drivers/scsi/advansys.c printk(" mcode_date 0x%x, mcode_version %d\n", printk 2364 drivers/scsi/advansys.c printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong)h); printk 2366 drivers/scsi/advansys.c printk(" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n", printk 2369 drivers/scsi/advansys.c printk(" sdtr_able 0x%x, wdtr_able 0x%x\n", printk 2372 drivers/scsi/advansys.c printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n", printk 2375 drivers/scsi/advansys.c printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%p\n", printk 2379 drivers/scsi/advansys.c printk(" icq_sp 0x%p, irq_sp 0x%p\n", h->icq_sp, h->irq_sp); printk 2381 drivers/scsi/advansys.c printk(" no_scam 0x%x, tagqng_able 0x%x\n", printk 2384 drivers/scsi/advansys.c printk(" chip_scsi_id 0x%x, cfg 0x%lx\n", printk 2395 drivers/scsi/advansys.c printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong)h); printk 2397 drivers/scsi/advansys.c printk(" disc_enable 0x%x, termination 0x%x\n", printk 2400 drivers/scsi/advansys.c printk(" chip_version 0x%x, mcode_date 0x%x\n", printk 2403 drivers/scsi/advansys.c printk(" mcode_version 0x%x, control_flag 0x%x\n", printk 2414 drivers/scsi/advansys.c printk("Scsi_Host at addr 0x%p, device %s\n", s, dev_name(boardp->dev)); printk 2415 drivers/scsi/advansys.c printk(" host_busy %d, host_no %d,\n", printk 2418 drivers/scsi/advansys.c printk(" base 0x%lx, io_port 0x%lx, irq %d,\n", printk 2421 drivers/scsi/advansys.c printk(" dma_channel %d, this_id %d, can_queue %d,\n", printk 2424 drivers/scsi/advansys.c printk(" cmd_per_lun %d, sg_tablesize %d, unchecked_isa_dma %d\n", printk 2449 drivers/scsi/advansys.c printk("%s: (%d bytes)\n", f, l); printk 2462 drivers/scsi/advansys.c printk(" %2.2X%2.2X%2.2X%2.2X", printk 2474 drivers/scsi/advansys.c printk(" %2.2X", (unsigned)s[i + (j * 4)]); printk 2477 drivers/scsi/advansys.c printk(" %2.2X%2.2X", printk 2482 drivers/scsi/advansys.c printk(" %2.2X%2.2X%2.2X", printk 2489 drivers/scsi/advansys.c printk("\n"); printk 2501 drivers/scsi/advansys.c printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q); printk 2503 drivers/scsi/advansys.c printk printk 2508 drivers/scsi/advansys.c printk printk 2514 drivers/scsi/advansys.c printk(" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n", printk 2520 drivers/scsi/advansys.c printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong)sgp); printk 2521 drivers/scsi/advansys.c printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt, printk 2524 drivers/scsi/advansys.c printk(" [%u]: addr 0x%lx, bytes %lu\n", printk 2537 drivers/scsi/advansys.c printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q); printk 2538 drivers/scsi/advansys.c printk(" srb_tag 0x%x, target_ix %u, cdb_len %u, tag_code %u,\n", printk 2541 drivers/scsi/advansys.c printk printk 2555 drivers/scsi/advansys.c printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %d)\n", printk 2557 drivers/scsi/advansys.c printk(" sg_cnt %u, sg_ptr 0x%x\n", printk 2563 drivers/scsi/advansys.c printk(" [%u]: sg_addr 0x%x, sg_count 0x%x\n", printk 2580 drivers/scsi/advansys.c printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q); printk 2582 drivers/scsi/advansys.c printk(" target_id %u, target_lun %u, srb_tag 0x%x\n", printk 2585 drivers/scsi/advansys.c printk(" cntl 0x%x, data_addr 0x%lx\n", printk 2588 drivers/scsi/advansys.c printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", printk 2592 drivers/scsi/advansys.c printk printk 2596 drivers/scsi/advansys.c printk(" sg_working_ix 0x%x, target_cmd %u\n", printk 2599 drivers/scsi/advansys.c printk(" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n", printk 4106 drivers/scsi/advansys.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 4112 drivers/scsi/advansys.c printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", printk 4472 drivers/scsi/advansys.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 4478 drivers/scsi/advansys.c printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", printk 4972 drivers/scsi/advansys.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 4978 drivers/scsi/advansys.c printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", printk 5460 drivers/scsi/advansys.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 5466 drivers/scsi/advansys.c printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", printk 11618 drivers/scsi/advansys.c printk(KERN_WARNING "Region %x-%x busy\n", ioport, printk 720 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: scsi_host_alloc failed\n"); printk 756 drivers/scsi/aha152x.c printk("aha152x: resetting bus...\n"); printk 764 drivers/scsi/aha152x.c printk(KERN_INFO printk 791 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq); printk 797 drivers/scsi/aha152x.c printk(KERN_INFO "aha152x%d: trying software interrupt, ", shpnt->host_no); printk 806 drivers/scsi/aha152x.c printk("lost.\n"); printk 808 drivers/scsi/aha152x.c printk("failed.\n"); printk 813 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x%d: irq %d possibly wrong. " printk 817 drivers/scsi/aha152x.c printk("ok.\n"); printk 825 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq); printk 831 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x%d: failed to add host.\n", shpnt->host_no); printk 996 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: reset_done w/o completion\n"); printk 1241 drivers/scsi/aha152x.c printk(KERN_NOTICE printk 1248 drivers/scsi/aha152x.c printk(KERN_NOTICE printk 1260 drivers/scsi/aha152x.c printk(KERN_NOTICE printk 1286 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: done() called outside of command\n"); printk 1737 drivers/scsi/aha152x.c printk(INFO_LEAD, CMDINFO(CURRENT_SC)); printk 1739 drivers/scsi/aha152x.c printk("\n"); printk 2463 drivers/scsi/aha152x.c printk(KERN_DEBUG "\nqueue status:\nissue_SC:\n"); printk 2468 drivers/scsi/aha152x.c printk(KERN_DEBUG "current_SC:\n"); printk 2472 drivers/scsi/aha152x.c printk(KERN_DEBUG "none\n"); printk 2474 drivers/scsi/aha152x.c printk(KERN_DEBUG "disconnected_SC:\n"); printk 3025 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port); printk 3074 drivers/scsi/aha152x.c printk(KERN_INFO "aha152x: processing commandline: "); printk 3078 drivers/scsi/aha152x.c printk(KERN_ERR "\naha152x: %s\n", setup[i].conf); printk 3079 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: invalid line\n"); printk 3082 drivers/scsi/aha152x.c printk("ok\n"); printk 3091 drivers/scsi/aha152x.c printk(KERN_ERR "\naha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n", printk 3112 drivers/scsi/aha152x.c printk(KERN_ERR "\naha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n", printk 3154 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n", printk 3190 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n", printk 3235 drivers/scsi/aha152x.c printk (KERN_INFO printk 3259 drivers/scsi/aha152x.c printk(KERN_INFO "aha152x: BIOS test: passed, "); printk 3261 drivers/scsi/aha152x.c printk(KERN_INFO "aha152x: "); printk 3270 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]); printk 3305 drivers/scsi/aha152x.c printk("auto configuration: ok, "); printk 3309 drivers/scsi/aha152x.c printk("%d controller(s) configured\n", setup_count); printk 3324 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup[i].io_port); printk 3358 drivers/scsi/aha152x.c printk(KERN_ERR "aha152x: you can only configure up to two controllers\n"); printk 3372 drivers/scsi/aha152x.c printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>" printk 175 drivers/scsi/aha1542.c printk("Aha1542: %x %x\n", hosterr, scsierr); printk 187 drivers/scsi/aha1542.c printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr); printk 277 drivers/scsi/aha1542.c printk("no interrupt?"); printk 279 drivers/scsi/aha1542.c printk("MBIF "); printk 281 drivers/scsi/aha1542.c printk("MBOF "); printk 283 drivers/scsi/aha1542.c printk("HACC "); printk 285 drivers/scsi/aha1542.c printk("SCRD "); printk 286 drivers/scsi/aha1542.c printk("status %02x\n", inb(STATUS(sh->io_port))); printk 301 drivers/scsi/aha1542.c printk("MBOF "); printk 303 drivers/scsi/aha1542.c printk("HACC "); printk 305 drivers/scsi/aha1542.c printk("SCRD "); printk 382 drivers/scsi/aha1542.c printk("aha1542_intr_handle: returning %6x\n", errstatus); printk 506 drivers/scsi/aha1542.c printk("aha1542_queuecommand: now waiting for interrupt "); printk 141 drivers/scsi/aha1740.c printk("makecode from %x,%x,%x,%x %x,%x,%x,%x", printk 182 drivers/scsi/aha1740.c printk("aha1740.c: WARNING: AHA1740 queue overflow!\n"); printk 202 drivers/scsi/aha1740.c printk("aha174x: Board detected, but not in enhanced mode, so disabled it.\n"); printk 230 drivers/scsi/aha1740.c DEB(printk("aha1740_intr top of loop.\n")); printk 242 drivers/scsi/aha1740.c printk("Aha1740 null ecbptr in interrupt (%x,%x,%x,%d)\n", printk 249 drivers/scsi/aha1740.c printk("Aha1740 null SCtmp in interrupt (%x,%x,%x,%d)\n", printk 275 drivers/scsi/aha1740.c printk("aha1740_intr_handle: returning %6x\n", printk 285 drivers/scsi/aha1740.c printk(KERN_ALERT "aha1740 hardware failure!\n"); printk 289 drivers/scsi/aha1740.c printk("aha1740 asynchronous event: %02x %02x %02x %02x %02x\n", printk 340 drivers/scsi/aha1740.c printk("aha1740_queuecommand: dev %d cmd %02x pos %d len %d ", printk 342 drivers/scsi/aha1740.c printk("scsi cmd:"); printk 343 drivers/scsi/aha1740.c for (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]); printk 344 drivers/scsi/aha1740.c printk("\n"); printk 370 drivers/scsi/aha1740.c printk("Sending command (%d %x)...", ecbno, done); printk 389 drivers/scsi/aha1740.c printk(KERN_WARNING "aha1740: out of memory in queuecommand!\n"); printk 413 drivers/scsi/aha1740.c printk("cptr %x: ",cptr); printk 415 drivers/scsi/aha1740.c for(i=0;i<24;i++) printk("%02x ", ptr[i]); printk 435 drivers/scsi/aha1740.c printk("aha1740_command: sending.. "); printk 437 drivers/scsi/aha1740.c printk("%02x ", ((unchar *)&host->ecb[ecbno])[i]); printk 439 drivers/scsi/aha1740.c printk("\n"); printk 458 drivers/scsi/aha1740.c DEB(printk("aha1740[%d] critical section\n",ecbno)); printk 464 drivers/scsi/aha1740.c printk("aha1740[%d]_mbxout wait!\n",ecbno); printk 474 drivers/scsi/aha1740.c printk("aha1740[%d]_attn wait!\n",ecbno); printk 481 drivers/scsi/aha1740.c DEB(printk("aha1740[%d] request queued.\n",ecbno)); printk 483 drivers/scsi/aha1740.c printk(KERN_ALERT "aha1740_queuecommand: done can't be NULL\n"); printk 511 drivers/scsi/aha1740.c DEB(printk("aha1740_biosparam\n")); printk 559 drivers/scsi/aha1740.c DEB(printk("aha1740_probe: \n")); printk 573 drivers/scsi/aha1740.c printk(KERN_INFO "Configuring slot %d at IO:%x, IRQ %u (%s)\n", printk 575 drivers/scsi/aha1740.c printk(KERN_INFO "aha174x: Extended translation %sabled.\n", printk 594 drivers/scsi/aha1740.c printk (KERN_ERR "aha1740_probe: Couldn't map ECB, giving up\n"); printk 599 drivers/scsi/aha1740.c DEB(printk("aha1740_probe: enable interrupt channel %d\n",irq_level)); printk 602 drivers/scsi/aha1740.c printk(KERN_ERR "aha1740_probe: Unable to allocate IRQ %d.\n", printk 167 drivers/scsi/aic7xxx/aic7770.c printk("aic7770_config: invalid irq setting %d\n", intdef); printk 290 drivers/scsi/aic7xxx/aic7770.c printk("%s: Reading SEEPROM...", ahc_name(ahc)); printk 298 drivers/scsi/aic7xxx/aic7770.c printk ("checksum error\n"); printk 301 drivers/scsi/aic7xxx/aic7770.c printk("done.\n"); printk 307 drivers/scsi/aic7xxx/aic7770.c printk("%s: No SEEPROM available\n", ahc_name(ahc)); printk 284 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Setting mode 0x%x\n", ahd_name(ahd), printk 302 drivers/scsi/aic7xxx/aic79xx_core.c printk("Reading mode 0x%x\n", mode_ptr); printk 872 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n", printk 1169 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); printk 1210 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Warning - GSFIFO SCB %d invalid\n", printk 1334 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Warning - DMA-up and complete " printk 1355 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Warning - Complete Qfrz SCB %d invalid\n", printk 1372 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Warning - Complete SCB %d invalid\n", printk 1677 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: WARNING no command for scb %d " printk 1709 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: hwerrint, %s\n", printk 1742 drivers/scsi/aic7xxx/aic79xx_core.c printk("sg[%d] - Addr 0x%x%x : Length %d%s\n", printk 1758 drivers/scsi/aic7xxx/aic79xx_core.c printk("sg[%d] - Addr 0x%x%x : Length %d%s\n", printk 1797 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Handle Seqint Called for code %d\n", printk 1831 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Assuming LQIPHASE_NLQ with " printk 1837 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Entering NONPACK\n", ahd_name(ahd)); printk 1842 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Invalid Sequencer interrupt occurred, " printk 1861 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: ", ahd_name(ahd)); printk 1862 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCB %d Packetized Status Overrun", scbid); printk 1876 drivers/scsi/aic7xxx/aic79xx_core.c printk("CFG4ISTAT: Free SCB %d referenced", scbid); printk 1891 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: ILLEGAL_PHASE 0x%x\n", printk 1903 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Issued Bus Reset.\n", ahd_name(ahd)); printk 1928 drivers/scsi/aic7xxx/aic79xx_core.c printk("Invalid phase with no valid SCB. " printk 1992 drivers/scsi/aic7xxx/aic79xx_core.c printk("Unexpected command phase from " printk 2008 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), printk 2044 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: PDATA_REINIT - DFCNTRL = 0x%x " printk 2077 drivers/scsi/aic7xxx/aic79xx_core.c printk("ahd_intr: HOST_MSG_LOOP bad " printk 2126 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:%c:%d: no active SCB for reconnecting " printk 2129 drivers/scsi/aic7xxx/aic79xx_core.c printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " printk 2133 drivers/scsi/aic7xxx/aic79xx_core.c printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " printk 2140 drivers/scsi/aic7xxx/aic79xx_core.c printk("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " printk 2145 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", printk 2147 drivers/scsi/aic7xxx/aic79xx_core.c printk("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); printk 2148 drivers/scsi/aic7xxx/aic79xx_core.c printk("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); printk 2176 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:%c:%d: unknown scsi bus phase %x, " printk 2188 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:%c:%d: Missed busfree. " printk 2218 drivers/scsi/aic7xxx/aic79xx_core.c printk("data overrun detected %s. Tag == 0x%x.\n", printk 2222 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s seen Data Phase. Length = %ld. " printk 2247 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:%c:%d:%d: Attempt to issue message failed\n", printk 2280 drivers/scsi/aic7xxx/aic79xx_core.c printk("Task Management Func 0x%x Complete\n", printk 2338 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCB completes before TMF\n"); printk 2363 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Tracepoint %d\n", ahd_name(ahd), printk 2372 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), printk 2437 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Transceiver State Has Changed to %s mode\n", printk 2449 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: SCSI offset overrun detected. Resetting bus.\n", printk 2454 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Someone reset channel A\n", ahd_name(ahd)); printk 2464 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); printk 2494 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: ahd_intr - referenced scb not " printk 2503 drivers/scsi/aic7xxx/aic79xx_core.c printk("Saw Selection Timeout for SCB 0x%x\n", printk 2531 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", printk 2584 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Invalid SCB %d in DFF%d " printk 2617 drivers/scsi/aic7xxx/aic79xx_core.c printk("Saw Busfree. Busfreetime = 0x%x.\n", printk 2658 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Missing case in ahd_handle_scsiint. status = %x\n", printk 2694 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: NLQCRC found via LQISTATE\n", printk 2726 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Transmission error detected\n", ahd_name(ahd)); printk 2731 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 2737 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Gross protocol error during incoming " printk 2766 drivers/scsi/aic7xxx/aic79xx_core.c printk("LQIRetry for LQICRCI_LQ to release ACK\n"); printk 2814 drivers/scsi/aic7xxx/aic79xx_core.c printk("LQICRC_NLQ\n"); printk 2816 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: No SCB valid for LQICRC_NLQ. " printk 2822 drivers/scsi/aic7xxx/aic79xx_core.c printk("Need to handle BADLQI!\n"); printk 2829 drivers/scsi/aic7xxx/aic79xx_core.c printk("Acking %s to clear perror\n", printk 2874 drivers/scsi/aic7xxx/aic79xx_core.c printk("LQIRETRY for LQIPHASE_LQ\n"); printk 2877 drivers/scsi/aic7xxx/aic79xx_core.c printk("LQIRETRY for LQIPHASE_NLQ\n"); printk 2885 drivers/scsi/aic7xxx/aic79xx_core.c printk("Resetting Channel for LQI Phase error\n"); printk 2973 drivers/scsi/aic7xxx/aic79xx_core.c printk("Probable outgoing LQ CRC error. " printk 2995 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Parity on last REQ detected " printk 3009 drivers/scsi/aic7xxx/aic79xx_core.c printk("Unexpected PKT busfree condition\n"); printk 3018 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); printk 3073 drivers/scsi/aic7xxx/aic79xx_core.c printk("Abort for unidentified " printk 3080 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCB %d - Abort%s Completed.\n", printk 3106 drivers/scsi/aic7xxx/aic79xx_core.c printk("found == 0x%x\n", found); printk 3144 drivers/scsi/aic7xxx/aic79xx_core.c printk("PPR negotiation rejected busfree.\n"); printk 3188 drivers/scsi/aic7xxx/aic79xx_core.c printk("WDTR negotiation rejected busfree.\n"); printk 3213 drivers/scsi/aic7xxx/aic79xx_core.c printk("SDTR negotiation rejected busfree.\n"); printk 3237 drivers/scsi/aic7xxx/aic79xx_core.c printk("Expected IDE Busfree\n"); printk 3246 drivers/scsi/aic7xxx/aic79xx_core.c printk("Expected QAS Reject Busfree\n"); printk 3272 drivers/scsi/aic7xxx/aic79xx_core.c printk("PPR Negotiation Busfree.\n"); printk 3299 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: ", ahd_name(ahd)); printk 3301 drivers/scsi/aic7xxx/aic79xx_core.c printk("Unexpected busfree %s, %d SCBs aborted, " printk 3339 drivers/scsi/aic7xxx/aic79xx_core.c printk("Target did not send an IDENTIFY message. " printk 3348 drivers/scsi/aic7xxx/aic79xx_core.c printk("No SCB found during protocol violation\n"); printk 3354 drivers/scsi/aic7xxx/aic79xx_core.c printk("No or incomplete CDB sent to device.\n"); printk 3365 drivers/scsi/aic7xxx/aic79xx_core.c printk("Completed command without status.\n"); printk 3368 drivers/scsi/aic7xxx/aic79xx_core.c printk("Unknown protocol violation.\n"); printk 3382 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Issued Channel %c Bus Reset. " printk 3404 drivers/scsi/aic7xxx/aic79xx_core.c printk("Protocol violation %s. Attempting to abort.\n", printk 3422 drivers/scsi/aic7xxx/aic79xx_core.c printk("Forcing renegotiation\n"); printk 3483 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Infinite loop in critical section\n" printk 3494 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Single stepping at 0x%x\n", ahd_name(ahd), printk 3598 drivers/scsi/aic7xxx/aic79xx_core.c printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", printk 3604 drivers/scsi/aic7xxx/aic79xx_core.c printk("Shared Data: "); printk 3606 drivers/scsi/aic7xxx/aic79xx_core.c printk("%#02x", hscb->shared_data.idata.cdb[i]); printk 3607 drivers/scsi/aic7xxx/aic79xx_core.c printk(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", printk 3939 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: target %d synchronous with " printk 3945 drivers/scsi/aic7xxx/aic79xx_core.c printk("(RDSTRM"); printk 3949 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s", options ? "|DT" : "(DT"); printk 3953 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s", options ? "|IU" : "(IU"); printk 3957 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s", options ? "|RTI" : "(RTI"); printk 3961 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s", options ? "|QAS" : "(QAS"); printk 3965 drivers/scsi/aic7xxx/aic79xx_core.c printk(")\n"); printk 3967 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 3969 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: target %d using " printk 3997 drivers/scsi/aic7xxx/aic79xx_core.c printk("Expecting IU Change busfree\n"); printk 4006 drivers/scsi/aic7xxx/aic79xx_core.c printk("PPR with IU_REQ outstanding\n"); printk 4058 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: target %d using %dbit transfers\n", printk 4334 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:%c:%d:%d: ", ahd_name(ahd), 'A', printk 4416 drivers/scsi/aic7xxx/aic79xx_core.c printk("Setting up for Parity Error delivery\n"); printk 4420 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: WARNING. No pending message for " printk 4451 drivers/scsi/aic7xxx/aic79xx_core.c printk("Bus Device Reset Message Sent\n"); printk 4469 drivers/scsi/aic7xxx/aic79xx_core.c printk("Abort%s Message Sent\n", printk 4490 drivers/scsi/aic7xxx/aic79xx_core.c printk("ahd_intr: AWAITING_MSG for an SCB that " printk 4492 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, printk 4574 drivers/scsi/aic7xxx/aic79xx_core.c printk("Ensuring async\n"); printk 4621 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", printk 4639 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Sending WDTR %x\n", printk 4668 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " printk 4718 drivers/scsi/aic7xxx/aic79xx_core.c printk("LQIRETRY for LQIPHASE_OUTPKT\n"); printk 4735 drivers/scsi/aic7xxx/aic79xx_core.c printk("INITIATOR_MSG_OUT"); printk 4742 drivers/scsi/aic7xxx/aic79xx_core.c printk(" PHASEMIS %s\n", printk 4769 drivers/scsi/aic7xxx/aic79xx_core.c printk(" byte 0x%x\n", ahd->send_msg_perror); printk 4810 drivers/scsi/aic7xxx/aic79xx_core.c printk(" byte 0x%x\n", printk 4825 drivers/scsi/aic7xxx/aic79xx_core.c printk("INITIATOR_MSG_IN"); printk 4832 drivers/scsi/aic7xxx/aic79xx_core.c printk(" PHASEMIS %s\n", printk 4853 drivers/scsi/aic7xxx/aic79xx_core.c printk(" byte 0x%x\n", printk 4875 drivers/scsi/aic7xxx/aic79xx_core.c printk("Asserting ATN for response\n"); printk 5023 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Returning to Idle Loop\n", printk 5175 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Received " printk 5205 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Target " printk 5247 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Received WDTR " printk 5263 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): requested %dBit " printk 5276 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Target " printk 5388 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Target " printk 5393 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Initiator " printk 5405 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): Received PPR width %x, " printk 5481 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: QAS request. SCSISIGI == 0x%x\n", printk 5546 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): PPR Rejected. " printk 5561 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): PPR Rejected. " printk 5578 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): refuses WIDE negotiation. Using " printk 5606 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): refuses synchronous negotiation. " printk 5617 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): refuses tagged commands. " printk 5623 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%s:%c:%d:%d): refuses %s tagged commands. " printk 5674 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:%c:%d: Message reject for %x -- ignored\n", printk 5861 drivers/scsi/aic7xxx/aic79xx_core.c printk("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); printk 5975 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), printk 6073 drivers/scsi/aic7xxx/aic79xx_core.c printk("aic7xxx: cannot malloc softc!\n"); printk 6111 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: scb size = 0x%x, hscb size = 0x%x\n", printk 6288 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: WARNING - Failed chip reset! " printk 6410 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: No SCB space found\n", ahd_name(ahd)); printk 6453 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd), printk 6477 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: ahd_init_scbdata - " printk 6612 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Setting up iocell workaround\n", ahd_name(ahd)); printk 6632 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: iocell first selection\n", ahd_name(ahd)); printk 6639 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: BYPASS now disabled\n", ahd_name(ahd)); printk 6879 drivers/scsi/aic7xxx/aic79xx_core.c printk("Mapped SG data\n"); printk 6915 drivers/scsi/aic7xxx/aic79xx_core.c printk("Mapped sense data\n"); printk 7171 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: current sensing timeout 1\n", ahd_name(ahd)); printk 7178 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: current sensing timeout 2\n", printk 7184 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Timedout during current-sensing test\n", printk 7192 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: current sensing timeout 3\n", ahd_name(ahd)); printk 7201 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: current_sensing == 0x%x\n", printk 7219 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: %s Channel %s\n", ahd_name(ahd), printk 7225 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: WARNING. Termination is not configured correctly.\n" printk 7340 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), printk 7569 drivers/scsi/aic7xxx/aic79xx_core.c printk("aic79xx: failed to set the SLOWCRC bit\n"); printk 7571 drivers/scsi/aic7xxx/aic79xx_core.c printk("aic79xx: SLOWCRC bit set\n"); printk 7593 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: unable to allocate ahd_tmode_tstate. " printk 7672 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: unable to allocate ahd_tmode_tstate. " printk 7742 drivers/scsi/aic7xxx/aic79xx_core.c printk("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, printk 7898 drivers/scsi/aic7xxx/aic79xx_core.c printk("Infinite interrupt loop, INTSTAT = %x", printk 8188 drivers/scsi/aic7xxx/aic79xx_core.c printk("qinstart = %d qinfifonext = %d\nQINFIFO:", printk 8203 drivers/scsi/aic7xxx/aic79xx_core.c printk("qinpos = %d, SCB index = %d\n", printk 8216 drivers/scsi/aic7xxx/aic79xx_core.c printk("Inactive SCB in qinfifo\n"); printk 8222 drivers/scsi/aic7xxx/aic79xx_core.c printk(" 0x%x", ahd->qinfifo[qinpos]); printk 8239 drivers/scsi/aic7xxx/aic79xx_core.c printk("\nWAITING_TID_QUEUES:\n"); printk 8267 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Waiting TID List inconsistency. " printk 8275 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: SCB = 0x%x Not Active!\n", printk 8291 drivers/scsi/aic7xxx/aic79xx_core.c printk(" %d ( ", SCB_GET_TARGET(ahd, scb)); printk 8312 drivers/scsi/aic7xxx/aic79xx_core.c printk("Inactive SCB pending MK_MSG\n"); printk 8319 drivers/scsi/aic7xxx/aic79xx_core.c printk("Removing MK_MSG scb\n"); printk 8337 drivers/scsi/aic7xxx/aic79xx_core.c printk(" 0x%x", SCB_GET_TAG(scb)); printk 8354 drivers/scsi/aic7xxx/aic79xx_core.c printk("Queueing mk_msg_scb\n"); printk 8365 drivers/scsi/aic7xxx/aic79xx_core.c printk(")\n"); printk 8393 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s:SCB List inconsistency. " printk 8401 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: SCB = %d Not Active!\n", printk 8417 drivers/scsi/aic7xxx/aic79xx_core.c printk("Inactive SCB in Waiting List\n"); printk 8427 drivers/scsi/aic7xxx/aic79xx_core.c printk("0x%x ", scbid); printk 8616 drivers/scsi/aic7xxx/aic79xx_core.c printk("Inactive SCB on pending list\n"); printk 8673 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: bus reset still active\n", printk 8848 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Interrupt coalescing " printk 8922 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCB 0x%x Received PKT Status of 0x%x\n", printk 8924 drivers/scsi/aic7xxx/aic79xx_core.c printk("\tflags = 0x%x, sense len = 0x%x, " printk 8933 drivers/scsi/aic7xxx/aic79xx_core.c printk("Unable to parse pkt_failures\n"); printk 8938 drivers/scsi/aic7xxx/aic79xx_core.c printk("No packet failure found\n"); printk 8941 drivers/scsi/aic7xxx/aic79xx_core.c printk("Invalid Command IU Field\n"); printk 8944 drivers/scsi/aic7xxx/aic79xx_core.c printk("TMF not supported\n"); printk 8947 drivers/scsi/aic7xxx/aic79xx_core.c printk("TMF failed\n"); printk 8950 drivers/scsi/aic7xxx/aic79xx_core.c printk("Invalid L_Q Type code\n"); printk 8953 drivers/scsi/aic7xxx/aic79xx_core.c printk("Illegal request\n"); printk 8966 drivers/scsi/aic7xxx/aic79xx_core.c printk("Sense data available\n"); printk 8984 drivers/scsi/aic7xxx/aic79xx_core.c printk("SCB %d: requests Check Status\n", printk 9012 drivers/scsi/aic7xxx/aic79xx_core.c printk("Sending Sense\n"); printk 9064 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Interrupted for status of 0???\n", printk 9139 drivers/scsi/aic7xxx/aic79xx_core.c printk("data overrun detected Tag == 0x%x.\n", printk 9179 drivers/scsi/aic7xxx/aic79xx_core.c printk("Handled %sResidual of %d bytes\n", printk 9219 drivers/scsi/aic7xxx/aic79xx_core.c printk("immediate event %x:%x lost\n", printk 9291 drivers/scsi/aic7xxx/aic79xx_core.c printk("0x%08x\n", ins_bytes[0] << 24 printk 9319 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Downloading Sequencer Program...", printk 9453 drivers/scsi/aic7xxx/aic79xx_core.c printk(" %d instructions downloaded\n", downloaded); printk 9454 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", printk 9637 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9640 drivers/scsi/aic7xxx/aic79xx_core.c printed = printk("%s[0x%x]", name, value); printk 9642 drivers/scsi/aic7xxx/aic79xx_core.c printed += printk(" "); printk 9657 drivers/scsi/aic7xxx/aic79xx_core.c printed += printk("%s%s", printk 9668 drivers/scsi/aic7xxx/aic79xx_core.c printed += printk(") "); printk 9670 drivers/scsi/aic7xxx/aic79xx_core.c printed += printk(" "); printk 9696 drivers/scsi/aic7xxx/aic79xx_core.c printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" printk 9703 drivers/scsi/aic7xxx/aic79xx_core.c printk("Card was paused\n"); printk 9706 drivers/scsi/aic7xxx/aic79xx_core.c printk("Completions are pending\n"); printk 9748 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9749 drivers/scsi/aic7xxx/aic79xx_core.c printk("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " printk 9760 drivers/scsi/aic7xxx/aic79xx_core.c printk("Pending list:"); printk 9765 drivers/scsi/aic7xxx/aic79xx_core.c cur_col = printk("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), printk 9773 drivers/scsi/aic7xxx/aic79xx_core.c printk("\nTotal %d\n", i); printk 9775 drivers/scsi/aic7xxx/aic79xx_core.c printk("Kernel Free SCB list: "); printk 9782 drivers/scsi/aic7xxx/aic79xx_core.c printk("%d ", SCB_GET_TAG(list_scb)); printk 9790 drivers/scsi/aic7xxx/aic79xx_core.c printk("%d ", SCB_GET_TAG(scb)); printk 9792 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9794 drivers/scsi/aic7xxx/aic79xx_core.c printk("Sequencer Complete DMA-inprog list: "); printk 9799 drivers/scsi/aic7xxx/aic79xx_core.c printk("%d ", scb_index); printk 9802 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9804 drivers/scsi/aic7xxx/aic79xx_core.c printk("Sequencer Complete list: "); printk 9809 drivers/scsi/aic7xxx/aic79xx_core.c printk("%d ", scb_index); printk 9812 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9815 drivers/scsi/aic7xxx/aic79xx_core.c printk("Sequencer DMA-Up and Complete list: "); printk 9820 drivers/scsi/aic7xxx/aic79xx_core.c printk("%d ", scb_index); printk 9823 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9824 drivers/scsi/aic7xxx/aic79xx_core.c printk("Sequencer On QFreeze and Complete list: "); printk 9829 drivers/scsi/aic7xxx/aic79xx_core.c printk("%d ", scb_index); printk 9832 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9843 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", printk 9859 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9862 drivers/scsi/aic7xxx/aic79xx_core.c cur_col += printk("SHADDR = 0x%x%x, SHCNT = 0x%x ", printk 9869 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9872 drivers/scsi/aic7xxx/aic79xx_core.c cur_col += printk("HADDR = 0x%x%x, HCNT = 0x%x ", printk 9887 drivers/scsi/aic7xxx/aic79xx_core.c printk("\nLQIN: "); printk 9889 drivers/scsi/aic7xxx/aic79xx_core.c printk("0x%x ", ahd_inb(ahd, LQIN + i)); printk 9890 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9892 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", printk 9895 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", printk 9898 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n", printk 9902 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9906 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 9908 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", printk 9911 drivers/scsi/aic7xxx/aic79xx_core.c printk("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", printk 9915 drivers/scsi/aic7xxx/aic79xx_core.c printk("CDB %x %x %x %x %x %x\n", printk 9922 drivers/scsi/aic7xxx/aic79xx_core.c printk("STACK:"); printk 9926 drivers/scsi/aic7xxx/aic79xx_core.c printk(" 0x%x", ahd->saved_stack[i]); printk 9932 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); printk 9951 drivers/scsi/aic7xxx/aic79xx_core.c printk("%3d", i); printk 9952 drivers/scsi/aic7xxx/aic79xx_core.c printk("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", printk 9960 drivers/scsi/aic7xxx/aic79xx_core.c printk("\n"); printk 10330 drivers/scsi/aic7xxx/aic79xx_core.c printk("Configuring Target Mode\n"); printk 10359 drivers/scsi/aic7xxx/aic79xx_core.c printk("Lun already enabled\n"); printk 10371 drivers/scsi/aic7xxx/aic79xx_core.c printk("Non-zero Group Codes\n"); printk 10383 drivers/scsi/aic7xxx/aic79xx_core.c printk("Couldn't allocate tstate\n"); printk 10391 drivers/scsi/aic7xxx/aic79xx_core.c printk("Couldn't allocate lstate\n"); printk 10402 drivers/scsi/aic7xxx/aic79xx_core.c printk("Couldn't allocate path\n"); printk 10470 drivers/scsi/aic7xxx/aic79xx_core.c printk("Lun now enabled for target mode\n"); printk 10489 drivers/scsi/aic7xxx/aic79xx_core.c printk("CTIO pending\n"); printk 10497 drivers/scsi/aic7xxx/aic79xx_core.c printk("ATIOs pending\n"); printk 10502 drivers/scsi/aic7xxx/aic79xx_core.c printk("INOTs pending\n"); printk 10512 drivers/scsi/aic7xxx/aic79xx_core.c printk("Target mode disabled\n"); printk 10561 drivers/scsi/aic7xxx/aic79xx_core.c printk("Configuring Initiator Mode\n"); printk 10695 drivers/scsi/aic7xxx/aic79xx_core.c printk("Incoming command from %d for %d:%d%s\n", printk 10742 drivers/scsi/aic7xxx/aic79xx_core.c printk("Reserved or VU command code type encountered\n"); printk 10759 drivers/scsi/aic7xxx/aic79xx_core.c printk("Received Immediate Command %d:%d:%d - %p\n", printk 226 drivers/scsi/aic7xxx/aic79xx_osm.c printk("(scsi%d:%c:%d:%d): ", printk 679 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id); printk 803 drivers/scsi/aic7xxx/aic79xx_osm.c printk("CDB:"); printk 805 drivers/scsi/aic7xxx/aic79xx_osm.c printk(" 0x%x", cmd->cmnd[cdb_byte]); printk 806 drivers/scsi/aic7xxx/aic79xx_osm.c printk("\n"); printk 862 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Device reset code sleeping\n", ahd_name(ahd)); printk 867 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Device reset timer expired (active %d)\n", printk 871 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval); printk 889 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Bus reset called for cmd %p\n", printk 899 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: SCSI bus reset delivered. " printk 1024 drivers/scsi/aic7xxx/aic79xx_osm.c printk("iocell[%d:%ld] = %d\n", instance, index, value); printk 1034 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Setting Global Tags= %d\n", tags); printk 1052 drivers/scsi/aic7xxx/aic79xx_osm.c printk("tag_info[%d:%d] = %d\n", instance, targ, value); printk 1093 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Malformed Option %s\n", printk 1264 drivers/scsi/aic7xxx/aic79xx_osm.c printk(KERN_WARNING "aic79xx: scsi_add_host failed\n"); printk 1503 drivers/scsi/aic7xxx/aic79xx_osm.c printk(KERN_WARNING printk 1545 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Tagged Queuing enabled. Depth %d\n", tags); printk 1780 drivers/scsi/aic7xxx/aic79xx_osm.c printk("SCB %d done'd twice\n", SCB_GET_TAG(scb)); printk 1811 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Set CAM_UNCOR_PARITY\n"); printk 1829 drivers/scsi/aic7xxx/aic79xx_osm.c printk("CDB:"); printk 1831 drivers/scsi/aic7xxx/aic79xx_osm.c printk(" 0x%x", scb->io_ctx->cmnd[i]); printk 1832 drivers/scsi/aic7xxx/aic79xx_osm.c printk("\n"); printk 1834 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Saw underflow (%ld of %ld bytes). " printk 1867 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Recovery SCB completes\n"); printk 1949 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Copied %d bytes of sense data at %d:", printk 1953 drivers/scsi/aic7xxx/aic79xx_osm.c printk("\n"); printk 1954 drivers/scsi/aic7xxx/aic79xx_osm.c printk("0x%x ", cmd->sense_buffer[i]); printk 1956 drivers/scsi/aic7xxx/aic79xx_osm.c printk("\n"); printk 1981 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Dropping tag count to %d\n", printk 2000 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Locking max tag count at %d\n", printk 2124 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: device overrun (status %x) on %d:%d:%d\n", printk 2173 drivers/scsi/aic7xxx/aic79xx_osm.c printk("CDB:"); printk 2175 drivers/scsi/aic7xxx/aic79xx_osm.c printk(" 0x%x", cmd->cmnd[cdb_byte]); printk 2176 drivers/scsi/aic7xxx/aic79xx_osm.c printk("\n"); printk 2235 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: At time of recovery, card was %spaused\n", printk 2246 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n", printk 2341 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Device is disconnected, re-queuing SCB\n"); printk 2366 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Recovery code sleeping\n", ahd_name(ahd)); printk 2371 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Timer Expired (active %d)\n", printk 2375 drivers/scsi/aic7xxx/aic79xx_osm.c printk("Recovery code awake\n"); printk 2380 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: Command abort returning 0x%x\n", printk 2417 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: set period to %d\n", ahd_name(ahd), period); printk 2470 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: set offset to %d\n", ahd_name(ahd), offset); printk 2506 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s DT\n", ahd_name(ahd), printk 2548 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s QAS\n", ahd_name(ahd), printk 2587 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s IU\n", ahd_name(ahd), printk 2627 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s Read Streaming\n", ahd_name(ahd), printk 2663 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s Write Flow Control\n", ahd_name(ahd), printk 2700 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: RTI not available\n", ahd_name(ahd)); printk 2707 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s RTI\n", ahd_name(ahd), printk 2743 drivers/scsi/aic7xxx/aic79xx_osm.c printk("%s: %s Precompensation\n", ahd_name(ahd), printk 151 drivers/scsi/aic7xxx/aic79xx_osm_pci.c printk(KERN_ERR "aic79xx: no multichannel peer found!\n"); printk 335 drivers/scsi/aic7xxx/aic79xx_osm_pci.c printk("aic79xx: PCI Device %d:%d:%d " printk 348 drivers/scsi/aic7xxx/aic79xx_osm_pci.c printk("aic79xx: PCI%d:%d:%d MEM region 0x%llx " printk 367 drivers/scsi/aic7xxx/aic79xx_osm_pci.c printk("aic79xx: PCI%d:%d:%d IO regions 0x%llx and " printk 333 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Enabling 39Bit Addressing\n", printk 523 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Reading VPD from SEEPROM...", printk 536 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: VPD parsing %s\n", printk 541 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Reading SEEPROM...", ahd_name(ahd)); printk 551 drivers/scsi/aic7xxx/aic79xx_pci.c printk("Unable to read SEEPROM\n"); printk 558 drivers/scsi/aic7xxx/aic79xx_pci.c printk ("checksum error\n"); printk 560 drivers/scsi/aic7xxx/aic79xx_pci.c printk ("done.\n"); printk 610 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Seeprom Contents:", ahd_name(ahd)); printk 613 drivers/scsi/aic7xxx/aic79xx_pci.c printk("\n\t0x%.4x", sc_data[i]); printk 614 drivers/scsi/aic7xxx/aic79xx_pci.c printk("\n"); printk 620 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: No SEEPROM available.\n", ahd_name(ahd)); printk 651 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: STPWLEVEL is %s\n", printk 666 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Manual Primary Termination\n", printk 674 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Primary Auto-Term Sensing failed! " printk 681 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Manual Secondary Termination\n", printk 689 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Secondary Auto-Term Sensing failed! " printk 709 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Unable to set termination settings!\n", printk 712 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Primary High byte termination %sabled\n", printk 716 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Primary Low byte termination %sabled\n", printk 720 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Secondary High byte termination %sabled\n", printk 724 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Secondary Low byte termination %sabled\n", printk 800 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: PCI error Interrupt\n", ahd_name(ahd)); printk 827 drivers/scsi/aic7xxx/aic79xx_pci.c printk(s, ahd_name(ahd), pci_status_source[i]); printk 857 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: PCI Split Interrupt - PCI-X status = 0x%x\n", printk 883 drivers/scsi/aic7xxx/aic79xx_pci.c printk(split_status_strings[bit], ahd_name(ahd), printk 890 drivers/scsi/aic7xxx/aic79xx_pci.c printk(split_status_strings[bit], ahd_name(ahd), "SG"); printk 937 drivers/scsi/aic7xxx/aic79xx_pci.c printk("%s: Unable to attach to unsupported chip revision %d\n", printk 227 drivers/scsi/aic7xxx/aic79xx_proc.c printk("ahd_proc_write_seeprom: incorrect buffer size\n"); printk 233 drivers/scsi/aic7xxx/aic79xx_proc.c printk("ahd_proc_write_seeprom: cksum verification failed\n"); printk 239 drivers/scsi/aic7xxx/aic79xx_proc.c printk("ahd_proc_write_seeprom: No Serial EEPROM\n"); printk 247 drivers/scsi/aic7xxx/aic79xx_proc.c printk("aic79xx: Unable to allocate serial " printk 252 drivers/scsi/aic7xxx/aic79xx_proc.c printk("aic79xx: Writing Serial EEPROM\n"); printk 204 drivers/scsi/aic7xxx/aic7xxx_93cx6.c printk("\nSerial EEPROM:\n\t"); printk 207 drivers/scsi/aic7xxx/aic7xxx_93cx6.c printk(KERN_CONT "\n\t"); printk 209 drivers/scsi/aic7xxx/aic7xxx_93cx6.c printk(KERN_CONT " 0x%x", buf[k]); printk 211 drivers/scsi/aic7xxx/aic7xxx_93cx6.c printk(KERN_CONT "\n"); printk 237 drivers/scsi/aic7xxx/aic7xxx_93cx6.c printk("ahc_write_seeprom: unsupported seeprom type %d\n", printk 906 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: WARNING no command for scb %d " printk 960 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: brkadrint, %s at seqaddr = 0x%x\n", printk 1017 drivers/scsi/aic7xxx/aic7xxx_core.c printk("ahc_intr - referenced scb " printk 1045 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Interrupted for status of 0???\n", printk 1059 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCB %d: requests Check Status\n", printk 1082 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Sending Sense\n"); printk 1158 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d: no active SCB for reconnecting " printk 1161 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " printk 1165 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " printk 1172 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " printk 1177 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n", printk 1179 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0)); printk 1180 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL)); printk 1193 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d: Warning - unknown message received from " printk 1214 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d: unknown scsi bus phase %x, " printk 1225 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d: Missed busfree. " printk 1253 drivers/scsi/aic7xxx/aic7xxx_core.c printk("ahc_intr: HOST_MSG_LOOP bad " printk 1355 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Unable to clear parity error. " printk 1391 drivers/scsi/aic7xxx/aic7xxx_core.c printk("data overrun detected %s." printk 1396 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s seen Data Phase. Length = %ld. NumSGs = %d.\n", printk 1402 drivers/scsi/aic7xxx/aic7xxx_core.c printk("sg[%d] - Addr 0x%x%x : Length %d\n", printk 1449 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d:%d: Attempt to issue message failed\n", printk 1469 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: No free or disconnected SCBs\n", ahc_name(ahc)); printk 1479 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Bogus TAG after DMA. SCBPTR %d, tag %d, our tag %d\n", printk 1488 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: BTT calculation out of range\n", ahc_name(ahc)); printk 1489 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " printk 1493 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " printk 1501 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " printk 1506 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n", printk 1513 drivers/scsi/aic7xxx/aic7xxx_core.c printk("ahc_intr: seqint, " printk 1558 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Spurious SCSI interrupt\n", ahc_name(ahc)); printk 1579 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Transceiver State Has Changed to %s mode\n", printk 1595 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Someone reset channel %c\n", printk 1655 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d: ", ahc_name(ahc), intr_channel, printk 1659 drivers/scsi/aic7xxx/aic7xxx_core.c printk("parity error detected %s. " printk 1666 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\tCRC Value Mismatch\n"); printk 1668 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\tNo terminal CRC packet " printk 1671 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\tIllegal CRC packet " printk 1674 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\tUnexpected %sDT Data Phase\n", printk 1742 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: ahc_intr - referenced scb not " printk 1751 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Saw Selection Timeout for SCB 0x%x\n", printk 1827 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCB %d - Abort%s Completed.\n", printk 1930 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: ", ahc_name(ahc)); printk 1945 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Unexpected busfree %s\n" printk 1954 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Missing case in ahc_handle_scsiint. status = %x\n", printk 2021 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Infinite loop in critical section\n", printk 2100 drivers/scsi/aic7xxx/aic7xxx_core.c printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", printk 2106 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Shared Data: "); printk 2108 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%#02x", hscb->shared_data.cdb[i]); printk 2109 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n", printk 2116 drivers/scsi/aic7xxx/aic7xxx_core.c printk("sg[%d] - Addr 0x%x%x : Length %d\n", printk 2584 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: target %d synchronous at %sMHz%s, " printk 2590 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: target %d using " printk 2653 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: target %d using %dbit transfers\n", printk 2830 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel, printk 2902 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Bus Device Reset Message Sent\n"); printk 2918 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Abort%s Message Sent\n", printk 2931 drivers/scsi/aic7xxx/aic7xxx_core.c printk("ahc_intr: AWAITING_MSG for an SCB that " printk 2933 drivers/scsi/aic7xxx/aic7xxx_core.c printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, printk 3014 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Ensuring async\n"); printk 3062 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", printk 3080 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Sending WDTR %x\n", printk 3102 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " printk 3155 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Target did not send an IDENTIFY message. " printk 3164 drivers/scsi/aic7xxx/aic7xxx_core.c printk("No SCB found during protocol violation\n"); printk 3170 drivers/scsi/aic7xxx/aic7xxx_core.c printk("No or incomplete CDB sent to device.\n"); printk 3180 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Completed command without status.\n"); printk 3183 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Unknown protocol violation.\n"); printk 3197 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Issued Channel %c Bus Reset. " printk 3219 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Protocol violation %s. Attempting to abort.\n", printk 3252 drivers/scsi/aic7xxx/aic7xxx_core.c printk("INITIATOR_MSG_OUT"); printk 3259 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" PHASEMIS %s\n", printk 3286 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" byte 0x%x\n", ahc->send_msg_perror); printk 3316 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" byte 0x%x\n", printk 3330 drivers/scsi/aic7xxx/aic7xxx_core.c printk("INITIATOR_MSG_IN"); printk 3337 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" PHASEMIS %s\n", printk 3358 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" byte 0x%x\n", printk 3380 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Asserting ATN for response\n"); printk 3661 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Received " printk 3692 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Target " printk 3734 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Received WDTR " printk 3750 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): requested %dBit " printk 3763 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Target " printk 3881 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Target " printk 3886 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Initiator " printk 3898 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): Received PPR width %x, " printk 4028 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): PPR Rejected. " printk 4044 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): refuses WIDE negotiation. Using " printk 4072 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): refuses synchronous negotiation. " printk 4083 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): refuses tagged commands. " printk 4089 drivers/scsi/aic7xxx/aic7xxx_core.c printk("(%s:%c:%d:%d): refuses %s tagged commands. " printk 4139 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s:%c:%d: Message reject for %x -- ignored\n", printk 4364 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc), printk 4405 drivers/scsi/aic7xxx/aic7xxx_core.c printk("aic7xxx: cannot malloc softc!\n"); printk 4619 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: WARNING - Failed chip reset! " printk 4642 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" Unsupported adapter type. Ignoring\n"); printk 4778 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: No SCB space found\n", ahc_name(ahc)); printk 4876 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: ahc_init_scbdata - " printk 5225 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Downloading Sequencer Program...", printk 5271 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Scratch Ram:"); printk 5274 drivers/scsi/aic7xxx/aic7xxx_core.c printk ("\n "); printk 5276 drivers/scsi/aic7xxx/aic7xxx_core.c printk (" 0x%x", ahc_inb(ahc, i)); printk 5281 drivers/scsi/aic7xxx/aic7xxx_core.c printk ("\n "); printk 5283 drivers/scsi/aic7xxx/aic7xxx_core.c printk (" 0x%x", ahc_inb(ahc, i)); printk 5286 drivers/scsi/aic7xxx/aic7xxx_core.c printk ("\n"); printk 5382 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: unable to allocate ahc_tmode_tstate. " printk 5389 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: unable to allocate ahc_tmode_tstate. " printk 5403 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: hardware scb %u bytes; kernel scb %u bytes; " printk 5433 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Host Adapter Bios disabled. Using default SCSI " printk 5614 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Infinite interrupt loop, INTSTAT = %x", printk 5873 drivers/scsi/aic7xxx/aic7xxx_core.c printk("qinpos = %d, SCB index = %d\n", printk 5896 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Inactive SCB in qinfifo\n"); printk 5939 drivers/scsi/aic7xxx/aic7xxx_core.c printk("found = %d, qinstart = %d, qinfifionext = %d\n", printk 5977 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Waiting List inconsistency. " printk 5985 drivers/scsi/aic7xxx/aic7xxx_core.c printk("scb_index = %d, next = %d\n", printk 6009 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Inactive SCB in Waiting List\n"); printk 6116 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Inactive SCB in untaggedQ\n"); printk 6163 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Disconnected List inconsistency. " printk 6419 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Inactive SCB on pending list\n"); printk 6697 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Handled %sResidual of %d bytes\n", printk 6737 drivers/scsi/aic7xxx/aic7xxx_core.c printk("immediate event %x:%x lost\n", printk 6807 drivers/scsi/aic7xxx/aic7xxx_core.c printk("0x%08x\n", ins_bytes[0] << 24 printk 6875 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n%s: Program too large for instruction memory " printk 6918 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" %d instructions downloaded\n", downloaded); printk 6919 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", printk 7095 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7098 drivers/scsi/aic7xxx/aic7xxx_core.c printed = printk("%s[0x%x]", name, value); printk 7100 drivers/scsi/aic7xxx/aic7xxx_core.c printed += printk(" "); printk 7115 drivers/scsi/aic7xxx/aic7xxx_core.c printed += printk("%s%s", printk 7126 drivers/scsi/aic7xxx/aic7xxx_core.c printed += printk(") "); printk 7128 drivers/scsi/aic7xxx/aic7xxx_core.c printed += printk(" "); printk 7160 drivers/scsi/aic7xxx/aic7xxx_core.c printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" printk 7165 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Card was paused\n"); printk 7166 drivers/scsi/aic7xxx/aic7xxx_core.c printk("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n", printk 7169 drivers/scsi/aic7xxx/aic7xxx_core.c printk("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT), printk 7193 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7194 drivers/scsi/aic7xxx/aic7xxx_core.c printk("STACK:"); printk 7196 drivers/scsi/aic7xxx/aic7xxx_core.c printk(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8)); printk 7197 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\nSCB count = %d\n", ahc->scb_data->numscbs); printk 7198 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag); printk 7199 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB)); printk 7201 drivers/scsi/aic7xxx/aic7xxx_core.c printk("QINFIFO entries: "); printk 7209 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d ", ahc->qinfifo[qinpos]); printk 7212 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7214 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Waiting Queue entries: "); printk 7219 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG)); printk 7222 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7224 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Disconnected Queue entries: "); printk 7229 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG)); printk 7232 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7235 drivers/scsi/aic7xxx/aic7xxx_core.c printk("QOUTFIFO entries: "); printk 7239 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d ", ahc->qoutfifo[qoutpos]); printk 7242 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7244 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Sequencer Free SCB List: "); printk 7249 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d ", scb_index); printk 7252 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7254 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Sequencer SCB Info: "); printk 7257 drivers/scsi/aic7xxx/aic7xxx_core.c cur_col = printk("\n%3d ", i); printk 7264 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7266 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Pending list: "); printk 7271 drivers/scsi/aic7xxx/aic7xxx_core.c cur_col = printk("\n%3d ", scb->hscb->tag); printk 7277 drivers/scsi/aic7xxx/aic7xxx_core.c printk("("); printk 7281 drivers/scsi/aic7xxx/aic7xxx_core.c printk(")"); printk 7284 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7286 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Kernel Free SCB list: "); printk 7291 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d ", scb->hscb->tag); printk 7293 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7300 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Untagged Q(%d): ", target); printk 7305 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%d ", scb->hscb->tag); printk 7307 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n"); printk 7310 drivers/scsi/aic7xxx/aic7xxx_core.c printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); printk 7451 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Configuring Target Mode\n"); printk 7497 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Lun already enabled\n"); printk 7509 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Non-zero Group Codes\n"); printk 7521 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Couldn't allocate tstate\n"); printk 7529 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Couldn't allocate lstate\n"); printk 7540 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Couldn't allocate path\n"); printk 7615 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Lun now enabled for target mode\n"); printk 7634 drivers/scsi/aic7xxx/aic7xxx_core.c printk("CTIO pending\n"); printk 7642 drivers/scsi/aic7xxx/aic7xxx_core.c printk("ATIOs pending\n"); printk 7647 drivers/scsi/aic7xxx/aic7xxx_core.c printk("INOTs pending\n"); printk 7657 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Target mode disabled\n"); printk 7711 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Configuring Initiator Mode\n"); printk 7858 drivers/scsi/aic7xxx/aic7xxx_core.c printk("%s: ATIOs exhausted\n", ahc_name(ahc)); printk 7863 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Incoming command from %d for %d:%d%s\n", printk 7910 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Reserved or VU command code type encountered\n"); printk 7926 drivers/scsi/aic7xxx/aic7xxx_core.c printk("Received Immediate Command %d:%d:%d - %p\n", printk 255 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("(scsi%d:%c:%d:%d): ", printk 648 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("%s: Slave Alloc %d\n", ahc_name(ahc), sdev->id); printk 750 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("aic7xxx_abort returns 0x%x\n", error); printk 764 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("aic7xxx_dev_reset returns 0x%x\n", error); printk 786 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("%s: SCSI bus reset delivered. " printk 912 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Setting Global Tags= %d\n", tags); printk 930 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("tag_info[%d:%d] = %d\n", instance, targ, value); printk 971 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Malformed Option %s\n", printk 1127 drivers/scsi/aic7xxx/aic7xxx_osm.c printk(KERN_WARNING "aic7xxx: scsi_add_host failed\n"); printk 1367 drivers/scsi/aic7xxx/aic7xxx_osm.c printk(KERN_WARNING printk 1410 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Tagged Queuing enabled. Depth %d\n", tags); printk 1710 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("SCB %d done'd twice\n", scb->hscb->tag); printk 1740 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Set CAM_UNCOR_PARITY\n"); printk 1758 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("CDB:"); printk 1760 drivers/scsi/aic7xxx/aic7xxx_osm.c printk(" 0x%x", scb->io_ctx->cmnd[i]); printk 1761 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("\n"); printk 1763 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Saw underflow (%ld of %ld bytes). " printk 1796 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Recovery SCB completes\n"); printk 1861 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Copied %d bytes of sense data:", printk 1865 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("\n"); printk 1866 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("0x%x ", cmd->sense_buffer[i]); printk 1868 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("\n"); printk 1910 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Locking max tag count at %d\n", printk 2075 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("CDB:"); printk 2077 drivers/scsi/aic7xxx/aic7xxx_osm.c printk(" 0x%x", cmd->cmnd[cdb_byte]); printk 2078 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("\n"); printk 2096 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("%s:%d:%d:%d: Is not an active device\n", printk 2108 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("%s:%d:%d:%d: Command found on untagged queue\n", printk 2162 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("%s: At time of recovery, card was %spaused\n", printk 2174 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n", printk 2289 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Device is disconnected, re-queuing SCB\n"); printk 2314 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Recovery code sleeping\n"); printk 2320 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Timer Expired\n"); printk 2323 drivers/scsi/aic7xxx/aic7xxx_osm.c printk("Recovery code awake\n"); printk 197 drivers/scsi/aic7xxx/aic7xxx_osm_pci.c printk(KERN_ERR "aic7xxx: no multichannel peer found!\n"); printk 248 drivers/scsi/aic7xxx/aic7xxx_osm_pci.c printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); printk 415 drivers/scsi/aic7xxx/aic7xxx_osm_pci.c printk("aic7xxx: PCI Device %d:%d:%d " printk 428 drivers/scsi/aic7xxx/aic7xxx_osm_pci.c printk("aic7xxx: PCI%d:%d:%d MEM region 0x%llx " printk 447 drivers/scsi/aic7xxx/aic7xxx_osm_pci.c printk("aic7xxx: PCI%d:%d:%d IO region 0x%llx[0..255] " printk 748 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Enabling 39Bit Addressing\n", printk 892 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Using left over BIOS settings\n", printk 1151 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: External SRAM, %s access%s, %dbytes/SCB\n", printk 1288 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Reading SEEPROM...", ahc_name(ahc)); printk 1305 drivers/scsi/aic7xxx/aic7xxx_pci.c printk ("checksum error\n"); printk 1307 drivers/scsi/aic7xxx/aic7xxx_pci.c printk ("done.\n"); printk 1358 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: No SEEPROM available.\n", ahc_name(ahc)); printk 1395 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Low byte termination %sabled\n", printk 1565 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Manual SE Termination\n", printk 1573 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Manual LVD Termination\n", printk 1600 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: internal 50 cable %s present", printk 1605 drivers/scsi/aic7xxx/aic7xxx_pci.c printk(", internal 68 cable %s present", printk 1607 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("\n%s: external cable %s present\n", printk 1612 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: BIOS eeprom %s present\n", printk 1638 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Illegal cable configuration!!. " printk 1660 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: 68 pin termination " printk 1663 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: %sHigh byte termination " printk 1679 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: 50 pin termination " printk 1682 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: %sLow byte termination " printk 1692 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Primary Low Byte termination " printk 1705 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Primary High Byte " printk 1717 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: %sLow byte termination Enabled\n", printk 1727 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: %sHigh byte termination Enabled\n", printk 1933 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: PCI error Interrupt at seqaddr = 0x%x\n", printk 1939 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Data Parity Error Detected during address " printk 1943 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Signal System Error Detected\n", ahc_name(ahc)); printk 1946 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Received a Master Abort\n", ahc_name(ahc)); printk 1949 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Received a Target Abort\n", ahc_name(ahc)); printk 1952 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Signaled a Target Abort\n", ahc_name(ahc)); printk 1955 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Data Parity Error has been reported via PERR#\n", printk 1964 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("%s: Latched PCIERR interrupt with " printk 1971 drivers/scsi/aic7xxx/aic7xxx_pci.c printk( printk 2382 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("RAID functionality unsupported\n"); printk 2400 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("adapter at unexpected slot %d\n" printk 2425 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("adapter at unexpected slot %d\n" printk 2455 drivers/scsi/aic7xxx/aic7xxx_pci.c printk("adapter at unexpected slot %d\n" printk 205 drivers/scsi/aic7xxx/aic7xxx_proc.c printk("ahc_proc_write_seeprom: incorrect buffer size\n"); printk 211 drivers/scsi/aic7xxx/aic7xxx_proc.c printk("ahc_proc_write_seeprom: cksum verification failed\n"); printk 247 drivers/scsi/aic7xxx/aic7xxx_proc.c printk("ahc_proc_write_seeprom: unsupported adapter type\n"); printk 252 drivers/scsi/aic7xxx/aic7xxx_proc.c printk("ahc_proc_write_seeprom: No Serial EEPROM\n"); printk 260 drivers/scsi/aic7xxx/aic7xxx_proc.c printk("aic7xxx: Unable to allocate serial " printk 265 drivers/scsi/aic7xxx/aic7xxx_proc.c printk("aic7xxx: Writing Serial EEPROM\n"); printk 21 drivers/scsi/aic94xx/aic94xx.h #define asd_printk(fmt, ...) printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__) printk 24 drivers/scsi/aic94xx/aic94xx.h #define ENTER printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \ printk 26 drivers/scsi/aic94xx/aic94xx.h #define EXIT printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \ printk 312 drivers/scsi/aic94xx/aic94xx_sds.c printk(KERN_INFO "OCM is not initialized by BIOS," printk 227 drivers/scsi/arcmsr/arcmsr_attr.c printk(KERN_ERR "arcmsr: alloc sysfs mu_read failed\n"); printk 232 drivers/scsi/arcmsr/arcmsr_attr.c printk(KERN_ERR "arcmsr: alloc sysfs mu_write failed\n"); printk 237 drivers/scsi/arcmsr/arcmsr_attr.c printk(KERN_ERR "arcmsr: alloc sysfs mu_clear failed\n"); printk 250 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no); printk 259 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no); printk 265 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no); printk 275 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no); printk 482 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \ printk 498 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \ printk 515 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \ printk 725 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error\n", acb->host->host_no); printk 940 drivers/scsi/arcmsr/arcmsr_hba.c printk("arcmsr: set DMA 64 mask failed\n"); printk 948 drivers/scsi/arcmsr/arcmsr_hba.c printk("arcmsr: set DMA 32-bit mask failed\n"); printk 1156 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 1170 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 1183 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 1365 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 1388 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: pCCB ='0x%p' isr got aborted command \n", printk 1393 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command \ printk 1867 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 1880 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 1893 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 3173 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \ printk 3187 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_ERR "arcmsr%d: can't set driver mode.\n", acb->host->host_no); printk 3192 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \ printk 3215 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \ printk 3342 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'" printk 3352 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb" printk 3411 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'" printk 3421 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb" printk 3473 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'" printk 3483 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb" printk 3799 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: ""set ccb high \ printk 3816 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: cannot set driver mode\n", \ printk 3834 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \ printk 3849 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x\n", printk 3856 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \ printk 4029 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \ printk 4040 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \ printk 4052 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \ printk 4213 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "ARCMSR IOP enables EOI_MODE TIMEOUT"); printk 4233 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE "arcmsr%d: executing hw bus reset .....\n", acb->host->host_no); printk 4443 drivers/scsi/arcmsr/arcmsr_hba.c printk(KERN_NOTICE printk 238 drivers/scsi/arm/acornscsi.c printk("scsi%d: %s: DMAC %02x @%06x+%04x msk %02x, ", printk 243 drivers/scsi/arm/acornscsi.c printk("DMA @%06x, ", host->dma.start_addr); printk 244 drivers/scsi/arm/acornscsi.c printk("BH @%p +%04x, ", host->scsi.SCp.ptr, printk 246 drivers/scsi/arm/acornscsi.c printk("DT @+%04x ST @+%04x", host->dma.transferred, printk 248 drivers/scsi/arm/acornscsi.c printk("\n"); printk 278 drivers/scsi/arm/acornscsi.c printk("scsi%d: timeout while %s\n", host->host->host_no, msg); printk 335 drivers/scsi/arm/acornscsi.c printk("scsi%d: timeout while resetting card\n", printk 356 drivers/scsi/arm/acornscsi.c printk("scsi%d: timeout while resetting card\n", printk 361 drivers/scsi/arm/acornscsi.c printk(KERN_CRIT "scsi%d: WD33C93A didn't give enhanced reset interrupt\n", printk 466 drivers/scsi/arm/acornscsi.c printk("%s:%s", printk 470 drivers/scsi/arm/acornscsi.c printk("%X:%X", ssr >> 4, ssr & 0x0f); printk 478 drivers/scsi/arm/acornscsi.c printk("sbic: %c%c%c%c%c%c ", printk 485 drivers/scsi/arm/acornscsi.c printk("scsi: "); printk 487 drivers/scsi/arm/acornscsi.c printk(" ph %02X\n", cmdphase); printk 489 drivers/scsi/arm/acornscsi.c printk("sbic: %02X scsi: %X:%X ph: %02X\n", printk 504 drivers/scsi/arm/acornscsi.c printk("%c: %3s:", target == 8 ? 'H' : '0' + target, printk 517 drivers/scsi/arm/acornscsi.c printk("%c%02X", host->status[target][ptr].irq ? '-' : ' ', printk 522 drivers/scsi/arm/acornscsi.c printk(" %02X", host->status[target][ptr].ssr); printk 529 drivers/scsi/arm/acornscsi.c printk("==^"); printk 531 drivers/scsi/arm/acornscsi.c printk(" "); printk 533 drivers/scsi/arm/acornscsi.c printk(" %02ld", time_diff); printk 538 drivers/scsi/arm/acornscsi.c printk("\n"); printk 717 drivers/scsi/arm/acornscsi.c DBG(host->SCpnt, printk("scsi%d.%c: moved command to disconnected queue\n", printk 744 drivers/scsi/arm/acornscsi.c DBG(SCpnt,printk("scsi%d.%c: starting cmd %02X\n", printk 870 drivers/scsi/arm/acornscsi.c printk("scsi%d: null command in acornscsi_done", host->host->host_no); printk 1024 drivers/scsi/arm/acornscsi.c printk(KERN_CRIT "scsi%d.%c: I can't handle DMA_OUT!\n", printk 1253 drivers/scsi/arm/acornscsi.c printk("scsi%d.%c: Ack! DMA write correction %ld < 0!\n", printk 1316 drivers/scsi/arm/acornscsi.c printk("scsi%d: timeout while sending command\n", host->host->host_no); printk 1329 drivers/scsi/arm/acornscsi.c printk("scsi%d.%c: sending message ", printk 1343 drivers/scsi/arm/acornscsi.c printk("NOP"); printk 1383 drivers/scsi/arm/acornscsi.c printk("scsi%d: timeout while sending message\n", host->host->host_no); printk 1395 drivers/scsi/arm/acornscsi.c printk("\n"); printk 1473 drivers/scsi/arm/acornscsi.c printk("scsi%d.%c: message in: ", printk 1476 drivers/scsi/arm/acornscsi.c printk("\n"); printk 1497 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: command complete following non-status in phase?\n", printk 1576 drivers/scsi/arm/acornscsi.c printk(KERN_NOTICE "scsi%d.%c: disabling tagged queueing\n", printk 1587 drivers/scsi/arm/acornscsi.c printk(KERN_NOTICE "scsi%d.%c: Using asynchronous transfer\n", printk 1605 drivers/scsi/arm/acornscsi.c printk("scsi%d.%c: reconnect queue tag %02X\n", printk 1622 drivers/scsi/arm/acornscsi.c printk(KERN_NOTICE "scsi%d.%c: Using synchronous transfer, offset %d, %d ns\n", printk 1662 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n", printk 1738 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: null buffer passed to acornscsi_starttransfer\n", printk 1772 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d: invalid source id after reselection " printk 1779 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%d: reconnected while command in " printk 1804 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: reselected with no command " printk 1833 drivers/scsi/arm/acornscsi.c DBG(host->SCpnt, printk("scsi%d.%c: reconnected", printk 1839 drivers/scsi/arm/acornscsi.c DBG(host->SCpnt, printk("scsi%d.%c: had to move command " printk 1852 drivers/scsi/arm/acornscsi.c DBG(host->SCpnt, printk("scsi%d.%c: had to get command", printk 1865 drivers/scsi/arm/acornscsi.c printk(", data pointers: [%p, %X]", printk 1870 drivers/scsi/arm/acornscsi.c printk("\n"); printk 1886 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: unexpected disconnect\n", printk 1949 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d: reset in standard mode but wanted advanced mode.\n", printk 2000 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTING, SSR %02X?\n", printk 2036 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTED, SSR %02X?\n", printk 2074 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_MSGOUT, SSR %02X?\n", printk 2119 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_COMMAND, SSR %02X?\n", printk 2132 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_DISCONNECT, SSR %02X instead of disconnect?\n", printk 2142 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_IDLE, SSR %02X while idle?\n", printk 2202 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_RECONNECTED, SSR %02X after reconnect?\n", printk 2251 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_DATAIN, SSR %02X?\n", printk 2303 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_DATAOUT, SSR %02X?\n", printk 2324 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_STATUSIN, SSR %02X instead of MESSAGE_IN?\n", printk 2347 drivers/scsi/arm/acornscsi.c printk("scsi%d.%c: strange message in disconnection\n", printk 2354 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_MSGIN, SSR %02X after message in?\n", printk 2372 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_DONE, SSR %02X instead of disconnect?\n", printk 2398 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: PHASE_ABORTED, SSR %02X?\n", printk 2405 drivers/scsi/arm/acornscsi.c printk(KERN_ERR "scsi%d.%c: unknown driver phase %d\n", printk 2481 drivers/scsi/arm/acornscsi.c printk(KERN_CRIT "scsi%d.%c: WRITE attempted with NO_WRITE flag set\n", printk 2564 drivers/scsi/arm/acornscsi.c printk("on issue queue "); printk 2576 drivers/scsi/arm/acornscsi.c printk("on disconnected queue "); printk 2583 drivers/scsi/arm/acornscsi.c printk("executing "); printk 2629 drivers/scsi/arm/acornscsi.c printk("waiting for execution "); printk 2633 drivers/scsi/arm/acornscsi.c printk("unknown "); printk 2657 drivers/scsi/arm/acornscsi.c printk(KERN_WARNING "acornscsi_abort: "); printk 2663 drivers/scsi/arm/acornscsi.c printk("scsi%d: ", host->host->host_no); printk 2673 drivers/scsi/arm/acornscsi.c printk("clear "); printk 2685 drivers/scsi/arm/acornscsi.c printk("success\n"); printk 2697 drivers/scsi/arm/acornscsi.c printk("snooze\n"); printk 2711 drivers/scsi/arm/acornscsi.c printk("not running\n"); printk 2739 drivers/scsi/arm/acornscsi.c printk(KERN_WARNING "acornscsi_reset: "); printk 2926 drivers/scsi/arm/acornscsi.c printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n", printk 270 drivers/scsi/arm/cumana_1.c printk("scsi%d: IRQ%d not free: %d\n", printk 234 drivers/scsi/arm/cumana_2.c printk ("PSEUDO_OUT???\n"); printk 431 drivers/scsi/arm/cumana_2.c printk("scsi%d: IRQ%d not free: %d\n", printk 438 drivers/scsi/arm/cumana_2.c printk("scsi%d: DMA%d not free, using PIO\n", printk 551 drivers/scsi/arm/eesox.c printk("scsi%d: IRQ%d not free: %d\n", printk 558 drivers/scsi/arm/eesox.c printk("scsi%d: DMA%d not free, DMA disabled\n", printk 161 drivers/scsi/arm/fas216.c printk("FAS216: CTCL=%02X CTCM=%02X CMD=%02X STAT=%02X" printk 167 drivers/scsi/arm/fas216.c printk(" CNTL1=%02X CNTL2=%02X CNTL3=%02X CTCH=%02X\n", printk 176 drivers/scsi/arm/fas216.c printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s", printk 190 drivers/scsi/arm/fas216.c printk("FAS216_Info=\n"); printk 191 drivers/scsi/arm/fas216.c printk(" { magic_start=%lX host=%p SCpnt=%p origSCpnt=%p\n", printk 194 drivers/scsi/arm/fas216.c printk(" scsi={ io_shift=%X irq=%X cfg={ %X %X %X %X }\n", printk 198 drivers/scsi/arm/fas216.c printk(" type=%p phase=%X\n", printk 201 drivers/scsi/arm/fas216.c printk(" msgs async_stp=%X disconnectable=%d aborting=%d }\n", printk 204 drivers/scsi/arm/fas216.c printk(" stats={ queues=%X removes=%X fins=%X reads=%X writes=%X miscs=%X\n" printk 210 drivers/scsi/arm/fas216.c printk(" ifcfg={ clockrate=%X select_timeout=%X asyncperiod=%X sync_max_depth=%X }\n", printk 214 drivers/scsi/arm/fas216.c printk(" busyluns[%d]=%08lx dev[%d]={ disconnect_ok=%d stp=%X sof=%X sync_state=%X }\n", printk 219 drivers/scsi/arm/fas216.c printk(" dma={ transfer_type=%X setup=%p pseudo=%p stop=%p }\n", printk 222 drivers/scsi/arm/fas216.c printk(" internal_done=%X magic_end=%lX }\n", printk 230 drivers/scsi/arm/fas216.c printk(KERN_CRIT "FAS216 Error: magic at start corrupted\n"); printk 234 drivers/scsi/arm/fas216.c printk(KERN_CRIT "FAS216 Error: magic at end corrupted\n"); printk 295 drivers/scsi/arm/fas216.c printk("scsi%d.%c: %s", info->host->host_no, target, buf); printk 330 drivers/scsi/arm/fas216.c printk("\n"); printk 344 drivers/scsi/arm/fas216.c printk("\n"); printk 381 drivers/scsi/arm/fas216.c printk(KERN_ERR "SCSI IRQ trail\n"); printk 383 drivers/scsi/arm/fas216.c printk(" %02x:%02x:%02x:%1x", printk 388 drivers/scsi/arm/fas216.c printk("\n"); printk 391 drivers/scsi/arm/fas216.c printk("\n"); printk 394 drivers/scsi/arm/fas216.c printk(KERN_ERR "FAS216 commands: "); printk 396 drivers/scsi/arm/fas216.c printk("%02x:%p ", cmd_list[i].command, cmd_list[i].from); printk 399 drivers/scsi/arm/fas216.c printk("\n"); printk 646 drivers/scsi/arm/fas216.c printk(KERN_WARNING "scsi%d.%c: out of buffers\n", printk 922 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n", printk 957 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n", printk 1039 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.H: error during reselection: bytes", printk 1042 drivers/scsi/arm/fas216.c printk(" %02x", msg[i]); printk 1043 drivers/scsi/arm/fas216.c printk("\n"); printk 1061 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.%c: command complete with no " printk 1144 drivers/scsi/arm/fas216.c printk("scsi%d.%c: message was", info->host->host_no, fas216_target(info)); printk 1146 drivers/scsi/arm/fas216.c printk("%s%02X", i & 31 ? " " : "\n ", message[i]); printk 1147 drivers/scsi/arm/fas216.c printk("\n"); printk 1260 drivers/scsi/arm/fas216.c printk("scsi%d.%c: message in: ", printk 1263 drivers/scsi/arm/fas216.c printk("%02X ", message[i]); printk 1264 drivers/scsi/arm/fas216.c printk("\n"); printk 1502 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.%c: " printk 1515 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.%c: disconnect message received, but bus service %s?\n", printk 1526 drivers/scsi/arm/fas216.c printk(KERN_ERR "scsi%d.%c: bus phase %s after %s?\n", printk 1694 drivers/scsi/arm/fas216.c printk("scsi%d.%c: message out: ", printk 1697 drivers/scsi/arm/fas216.c printk("{ "); printk 1699 drivers/scsi/arm/fas216.c printk("%02x ", msg->msg[i]); printk 1700 drivers/scsi/arm/fas216.c printk("} "); printk 1702 drivers/scsi/arm/fas216.c printk("\n"); printk 2127 drivers/scsi/arm/fas216.c printk(KERN_WARNING "scsi%d.%c: losing request command\n", printk 2367 drivers/scsi/arm/fas216.c printk("on issue queue "); printk 2376 drivers/scsi/arm/fas216.c printk("on disconnected queue "); printk 2380 drivers/scsi/arm/fas216.c printk("executing "); printk 2408 drivers/scsi/arm/fas216.c printk("waiting for execution "); printk 2411 drivers/scsi/arm/fas216.c printk("unknown "); printk 2790 drivers/scsi/arm/fas216.c printk("family %x rev %x\n", family, rev); printk 2890 drivers/scsi/arm/fas216.c printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n", printk 46 drivers/scsi/arm/oak.c printk("writing %p len %d\n",addr, len); printk 61 drivers/scsi/arm/oak.c printk("reading %p len %d\n", addr, len); printk 74 drivers/scsi/arm/oak.c printk("status = %08X\n", status); printk 359 drivers/scsi/arm/powertec.c printk("scsi%d: IRQ%d not free: %d\n", printk 366 drivers/scsi/arm/powertec.c printk("scsi%d: DMA%d not free, using PIO\n", printk 90 drivers/scsi/arm/queue.c printk(KERN_WARNING "freeing non-empty queue %p\n", queue); printk 104 drivers/scsi/arm/scsi.h printk(KERN_WARNING printk 197 drivers/scsi/atari_scsi.c printk(KERN_ERR "SCSI DMA caused bus error near 0x%08lx\n", printk 199 drivers/scsi/atari_scsi.c printk(KERN_CRIT "SCSI DMA bus error -- bad DMA programming!"); printk 287 drivers/scsi/atari_scsi.c printk(KERN_CRIT "SCSI DMA error near 0x%08lx!\n", SCSI_DMA_GETADR()); printk 305 drivers/scsi/atari_scsi.c printk(KERN_ERR "SCSI DMA error: %ld bytes lost in " printk 403 drivers/scsi/atari_scsi.c printk("atari_scsi_setup: no arguments!\n"); printk 141 drivers/scsi/atp870u.c printk("atp870u_intr_handle enter\n"); printk 187 drivers/scsi/atp870u.c printk("atp870u_intr_handle status = %x\n",i); printk 205 drivers/scsi/atp870u.c printk("dev->id[c][target_id].last_len = %d dev->id[c][target_id].tran_len = %d\n",dev->id[c][target_id].last_len,dev->id[c][target_id].tran_len); printk 224 drivers/scsi/atp870u.c printk("Call sent_s870\n"); printk 234 drivers/scsi/atp870u.c printk("Status 0x85 return\n"); printk 274 drivers/scsi/atp870u.c printk(KERN_DEBUG "Device reselect\n"); printk 285 drivers/scsi/atp870u.c printk("cmdp = 0x41\n"); printk 300 drivers/scsi/atp870u.c printk("cmdp != 0x41\n"); printk 336 drivers/scsi/atp870u.c printk(KERN_DEBUG " %x",workreq->cmnd[l]); printk 337 drivers/scsi/atp870u.c printk("\n"); printk 349 drivers/scsi/atp870u.c printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k, atp_readb_io(dev, c, 0x14), atp_readb_io(dev, c, 0x13), atp_readb_io(dev, c, 0x12)); printk 396 drivers/scsi/atp870u.c printk("dev->id[c][target_id].last_len = 0\n"); printk 401 drivers/scsi/atp870u.c printk("target_id = %d adrcnt = %d\n",target_id,adrcnt); printk 428 drivers/scsi/atp870u.c printk("dev->id[%d][%d].prdaddr 0x%8x\n", c, target_id, dev->id[c][target_id].prdaddr); printk 442 drivers/scsi/atp870u.c printk("status 0x80 return dirct != 0\n"); printk 450 drivers/scsi/atp870u.c printk("status 0x80 return dirct = 0\n"); printk 468 drivers/scsi/atp870u.c printk(KERN_WARNING "AEC67162 CRC ERROR !\n"); printk 486 drivers/scsi/atp870u.c printk("workreq->scsi_done\n"); printk 509 drivers/scsi/atp870u.c printk("Call sent_s870(scsi_done)\n"); printk 597 drivers/scsi/atp870u.c printk("atp870u_queuecommand : req_p->device->channel > 1\n"); printk 624 drivers/scsi/atp870u.c printk( "atp870u_queuecommand: done can't be NULL\n"); printk 647 drivers/scsi/atp870u.c printk("atp870u_queuecommand : dev->quhd[c] == dev->quend[c]\n"); printk 656 drivers/scsi/atp870u.c printk("dev->ioport[c] = %x atp_readb_io(dev, c, 0x1c) = %x dev->in_int[%d] = %d dev->in_snd[%d] = %d\n",dev->ioport[c],atp_readb_io(dev, c, 0x1c),c,dev->in_int[c],c,dev->in_snd[c]); printk 660 drivers/scsi/atp870u.c printk("Call sent_s870(atp870u_queuecommand)\n"); printk 665 drivers/scsi/atp870u.c printk("atp870u_queuecommand : exit\n"); printk 693 drivers/scsi/atp870u.c printk("cmnd in_snd\n"); printk 698 drivers/scsi/atp870u.c printk("Sent_s870 enter\n"); printk 734 drivers/scsi/atp870u.c printk("Abort to Send\n"); printk 741 drivers/scsi/atp870u.c printk("OK to Send\n"); printk 744 drivers/scsi/atp870u.c printk(" %x",workreq->cmnd[i]); printk 746 drivers/scsi/atp870u.c printk("\n"); printk 779 drivers/scsi/atp870u.c printk("send_s870 while loop 1\n"); printk 800 drivers/scsi/atp870u.c printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,dev->id[c][target_id].devsp); printk 814 drivers/scsi/atp870u.c printk("dev->id[%2d][%2d].last_len = %d\n",c,j,dev->id[c][j].last_len); printk 835 drivers/scsi/atp870u.c printk("change SCSI_CMD_REG 0x08\n"); printk 858 drivers/scsi/atp870u.c printk("1. bttl %x, l %x\n",bttl, l); printk 875 drivers/scsi/atp870u.c printk("prd %4x %4x %4x %4x\n",(((unsigned short int *)prd)[0]),(((unsigned short int *)prd)[1]),(((unsigned short int *)prd)[2]),(((unsigned short int *)prd)[3])); printk 876 drivers/scsi/atp870u.c printk("2. bttl %x, l %x\n",bttl, l); printk 880 drivers/scsi/atp870u.c printk("send_s870: prdaddr_2 0x%8x target_id %d\n", dev->id[c][target_id].prdaddr,target_id); printk 911 drivers/scsi/atp870u.c printk( "start DMA(to target)\n"); printk 923 drivers/scsi/atp870u.c printk( "start DMA(to host)\n"); printk 1210 drivers/scsi/atp870u.c printk("atp870u_init_tables fail\n"); printk 1513 drivers/scsi/atp870u.c printk(KERN_ERR "atp870u: DMA mask required but not available.\n"); printk 1595 drivers/scsi/atp870u.c printk(" atp870u: abort Channel = %x \n", c); printk 1596 drivers/scsi/atp870u.c printk("working=%x last_cmd=%x ", dev->working[c], dev->last_cmd[c]); printk 1597 drivers/scsi/atp870u.c printk(" quhdu=%x quendu=%x ", dev->quhd[c], dev->quend[c]); printk 1599 drivers/scsi/atp870u.c printk(" r%2x=%2x", j, atp_readb_io(dev, c, j)); printk 1601 drivers/scsi/atp870u.c printk(" r1c=%2x", atp_readb_io(dev, c, 0x1c)); printk 1602 drivers/scsi/atp870u.c printk(" r1f=%2x in_snd=%2x ", atp_readb_io(dev, c, 0x1f), dev->in_snd[c]); printk 1603 drivers/scsi/atp870u.c printk(" d00=%2x", atp_readb_pci(dev, c, 0x00)); printk 1604 drivers/scsi/atp870u.c printk(" d02=%2x", atp_readb_pci(dev, c, 0x02)); printk 1608 drivers/scsi/atp870u.c printk("\n que cdb= "); printk 1610 drivers/scsi/atp870u.c printk(" %2x ",workrequ->cmnd[k]); printk 1612 drivers/scsi/atp870u.c printk(" last_lenu= %x ",(unsigned int)dev->id[c][j].last_len); printk 1736 drivers/scsi/atp870u.c printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]); printk 1843 drivers/scsi/atp870u.c printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]); printk 1986 drivers/scsi/atp870u.c printk("dev->id[%2d][%2d].devsp = %2x\n",c,i,dev->id[c][i].devsp); printk 2313 drivers/scsi/atp870u.c printk("dev->id[%2d][%2d].devsp = %2x\n",c,i,dev->id[c][i].devsp); printk 109 drivers/scsi/be2iscsi/be_iscsi.c printk(KERN_INFO "In beiscsi_session_destroy\n"); printk 5851 drivers/scsi/be2iscsi/be_main.c printk(KERN_ERR printk 5855 drivers/scsi/be2iscsi/be_main.c printk(KERN_INFO "In beiscsi_module_init, tt=%p\n", printk 5860 drivers/scsi/be2iscsi/be_main.c printk(KERN_ERR printk 111 drivers/scsi/bfa/bfa_cs.h printk(KERN_ERR "Assertion failure: %s:%d: %d", \ printk 173 drivers/scsi/bfa/bfad.c printk(KERN_INFO "bfad[%d]: Kernel thread " printk 208 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad%d: bfad_setup_intr failed\n", printk 221 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "%s: install_msix failed, bfad%d\n", printk 232 drivers/scsi/bfa/bfad.c printk(KERN_WARNING printk 725 drivers/scsi/bfa/bfad.c printk(KERN_ERR "pci_enable_device fail %p\n", pdev); printk 740 drivers/scsi/bfa/bfad.c printk(KERN_ERR "dma_set_mask_and_coherent fail %p\n", pdev); printk 751 drivers/scsi/bfa/bfad.c printk(KERN_ERR "Fail to map bar0\n"); printk 776 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "BFA[%s]: " printk 782 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "BFA[%s]: invalid " printk 824 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad%d bfad_hal_mem_alloc failure\n", printk 826 drivers/scsi/bfa/bfad.c printk(KERN_WARNING printk 1013 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad_im_probe failed\n"); printk 1040 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad%d: failed to create pbc vport" printk 1222 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfa %s: trying one msix " printk 1231 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad%d: " printk 1308 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "Error alloc trace buffer!\n"); printk 1330 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad_pci_init failure!\n"); printk 1709 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "bfad_im_module_init failure\n"); printk 1722 drivers/scsi/bfa/bfad.c printk(KERN_WARNING "pci_register_driver failure\n"); printk 1752 drivers/scsi/bfa/bfad.c printk(KERN_ALERT "Can't locate firmware %s\n", fw_name); printk 1759 drivers/scsi/bfa/bfad.c printk(KERN_ALERT "Fail to allocate buffer for fw image " printk 3444 drivers/scsi/bfa/bfad_bsg.c printk(KERN_INFO "bfa %s: fcpt request buffer alloc failed\n", printk 3452 drivers/scsi/bfa/bfad_bsg.c printk(KERN_INFO "bfa %s: fcpt response buffer alloc failed\n", printk 3467 drivers/scsi/bfa/bfad_bsg.c printk(KERN_INFO "bfa %s: fcpt request fcxp_map_sg failed\n", printk 3483 drivers/scsi/bfa/bfad_bsg.c printk(KERN_INFO "bfa %s: fcpt response fcxp_map_sg failed\n", printk 79 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO "bfad[%d]: Failed to allocate fwtrc buffer\n", printk 93 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO "bfad[%d]: Failed to collect fwtrc\n", printk 121 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO "bfad[%d]: Failed to allocate fwsave buffer\n", printk 135 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO "bfad[%d]: Failed to collect fwsave\n", printk 259 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO printk 273 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO "bfad[%d]: Failed to allocate regrd buffer\n", printk 285 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO "bfad[%d]: Failed reg offset check\n", printk 326 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO printk 339 drivers/scsi/bfa/bfad_debugfs.c printk(KERN_INFO printk 545 drivers/scsi/bfa/bfad_im.c printk(KERN_WARNING "idr_alloc failure\n"); printk 573 drivers/scsi/bfa/bfad_im.c printk(KERN_WARNING "scsi_add_host failure %d\n", error); printk 1139 drivers/scsi/bfa/bfad_im.c printk(KERN_WARNING printk 1240 drivers/scsi/bfa/bfad_im.c printk(KERN_WARNING printk 1257 drivers/scsi/bfa/bfad_im.c printk(KERN_WARNING "hal_io failure\n"); printk 85 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to allocate cb_arg for RRQ\n"); printk 161 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to alloc mp buf\n"); printk 166 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "l2_els_compl: resp len is " printk 194 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to allocate cb_arg for ADISC\n"); printk 222 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to allocate cb_arg for LOGO\n"); printk 250 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to allocate cb_arg for LOGO\n"); printk 332 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "srr buf: mem alloc failure\n"); printk 340 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "fc_frame_alloc failure\n"); printk 457 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "rec buf: mem alloc failure\n"); printk 465 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "fc_frame_alloc failure\n"); printk 597 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to allocate cb_arg for REC\n"); printk 638 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Unable to allocate cb_arg for SRR\n"); printk 691 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "els 0x%x: rport not ready\n", op); printk 696 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "els 0x%x: link is not ready\n", op); printk 701 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "els 0x%x: tgt not ready\n", op); printk 722 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "ELS MP request init failed\n"); printk 741 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "Invalid ELS op 0x%x\n", op); printk 782 drivers/scsi/bnx2fc/bnx2fc_els.c printk(KERN_ERR PFX "initiate_els.. session not ready\n"); printk 441 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_rcv: lport is NULL\n"); printk 452 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n"); printk 527 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Invalid lport struct\n"); printk 632 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_WARNING PFX "dropping frame with " printk 749 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Error on scsi_add_host\n"); printk 843 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "ERROR:bnx2fc_destroy_timer - " printk 877 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR "indicate_netevent: "\ printk 1012 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "em_config:fc_exch_mgr_alloc failed\n"); printk 1138 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Failed to create vport, " printk 1145 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "vn ports cannot be created on" printk 1156 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_vport_create (%s) failed\n", printk 1248 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_INFO "%2x:%2x:%2x:%2x:%2x:%2x\n", ha->addr[0], printk 1284 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Failed to attach FC transport\n"); printk 1291 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX printk 1368 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Unable to allocate hba structure\n"); printk 1384 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "create_adapter: bind error\n"); printk 1394 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Unable to allocate tgt offload list\n"); printk 1402 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "em_config:bnx2fc_cmd_mgr_alloc failed\n"); printk 1451 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Unable to allocate interface structure\n"); printk 1516 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "could not allocate scsi host structure\n"); printk 1532 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Setting vport names, 0x%llX 0x%llX\n", printk 1540 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Error on bnx2fc_net_config\n"); printk 1546 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Couldn't configure shost for %s\n", printk 1554 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Couldn't configure libfc\n"); printk 1572 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Error on bnx2fc_em_config\n"); printk 1680 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_destroy: interface or lport not found\n"); printk 1739 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "cnic is NULL\n"); printk 1853 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "ulp_init: start discovery\n"); printk 1899 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ALERT PFX printk 1906 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ALERT PFX printk 1919 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_start: %s failed to initialize. " printk 1972 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR "ULP_STOP\n"); printk 2005 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Init not done yet\n"); printk 2053 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc FCoE not supported on %s," printk 2061 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "hba initialization failed\n"); printk 2078 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "register_device failed, rc = %d\n", rc); printk 2316 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR "fip mode not FABRIC\n"); printk 2338 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Not a netxtreme2 device\n"); printk 2343 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "unable to obtain drv_info\n"); printk 2352 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_create: hba not found\n"); printk 2363 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_interface_create failed\n"); printk 2381 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "ulp_init could not create timer_wq\n"); printk 2388 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "Failed to create interface (%s)\n", printk 2516 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "adapter_lookup: hba NULL\n"); printk 2533 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc port check: %s, flags: %lx\n", printk 2541 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "bnx2fc_ulp_exit: hba not found, dev 0%p\n", printk 2694 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_INFO PFX "%s", version); printk 2699 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR "failed to register an fcoe transport, check " printk 2783 drivers/scsi/bnx2fc/bnx2fc_fcoe.c printk(KERN_ERR PFX "MOD_EXIT:destroy hba = 0x%p\n", printk 72 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "hba->cnic NULL during fcoe fw init\n"); printk 394 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "WARN: enable_req port_id = 0x%x," printk 577 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "fc_frame_alloc failure\n"); printk 602 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "dropping ELS 0x%x\n", op); printk 719 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "err_warn: Not a SCSI cmd\n"); printk 748 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "err_warn: io_req (0x%x) already " printk 775 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "SRR in progress\n"); printk 793 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "err_warn: initiate_abts " printk 843 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "err_warn: Not a SCSI cmd\n"); printk 861 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Unsol Compl: Invalid CQE Subtype\n"); printk 883 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "ERROR:xid out of range\n"); printk 899 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "ERROR? cq_compl - io_req is NULL\n"); printk 926 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Invalid rx state - %d\n", printk 954 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Invalid rx state = %d\n", printk 971 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Invalid cmd_type %d\n", cmd_type); printk 1042 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "process_new_cqes: cq is NULL\n"); printk 1098 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "conn_id 0x%x not valid\n", conn_id); printk 1126 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ALERT PFX "ERROR:ofld_cmpl: No pending ofld req\n"); printk 1133 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "ERROR:ofld_cmpl: HBA mis-match\n"); printk 1144 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to allocate FCoE context " printk 1178 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "ERROR:enbl_cmpl: No pending ofld req\n"); printk 1190 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "context id mis-match\n"); printk 1195 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "bnx2fc-enbl_cmpl: HBA mis-match\n"); printk 1217 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "ERROR: disable_cmpl: No disable req\n"); printk 1224 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Disable failed with cmpl status %d\n", printk 1249 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "destroy_cmpl: No destroy req\n"); printk 1256 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Destroy conn failed, cmpl status %d\n", printk 1273 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "init_failure due to invalid opcode\n"); printk 1277 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "init failed due to ctx alloc failure\n"); printk 1281 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "init_failure due to NIC error\n"); printk 1284 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "init failure due to compl status err\n"); printk 1287 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "init failure due to HSI mismatch\n"); printk 1290 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "Unknown Error code %d\n", err_code); printk 1334 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_INFO PFX "[%.2x]: FCOE_INIT passed\n", printk 1343 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "DESTROY failed\n"); printk 1345 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "DESTROY success\n"); printk 1362 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "STAT failed\n"); printk 1369 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unknown opcode 0x%x\n", printk 1847 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to allocate task context BDT\n"); printk 1860 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to allocate task context array\n"); printk 1871 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to alloc context mapping array\n"); printk 1884 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to alloc task context\n"); printk 2005 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "hash table pointers alloc failed\n"); printk 2011 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "hash table pointers (dma) alloc failed\n"); printk 2021 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "hash segment alloc failed\n"); printk 2030 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "hash table pbl alloc failed\n"); printk 2093 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to allocate t2 hash table ptr\n"); printk 2104 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to allocate t2 hash table\n"); printk 2119 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to alloc MP Dummy Buffer\n"); printk 2128 drivers/scsi/bnx2fc/bnx2fc_hwi.c printk(KERN_ERR PFX "unable to alloc Stats Buffer\n"); printk 151 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "cmd_timeout: invalid cmd_type %d\n", printk 186 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "scsi_done - sc_cmd NULL. " printk 227 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "cmd_mgr_alloc: Invalid min_xid 0x%x \ printk 239 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc cmgr\n"); printk 247 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc free_list\n"); printk 254 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc free_list_lock\n"); printk 278 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc io_req\n"); printk 300 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc io_bdt_pool\n"); printk 308 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc " printk 323 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "failed to alloc " printk 432 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "elstm_alloc: list_empty\n"); printk 604 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "unable to alloc MP req buffer\n"); printk 613 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "unable to alloc TM resp buffer\n"); printk 626 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "unable to alloc MP req bd\n"); printk 634 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "unable to alloc MP resp bd\n"); printk 688 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "device_reset: rport is NULL\n"); printk 699 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "device_reset: link is not ready\n"); printk 707 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "device_reset: tgt not offloaded\n"); printk 715 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "tmf: Failed TMF"); printk 731 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Task mgmt MP request init failed\n"); printk 848 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "initiate_abts: tgt not offloaded\n"); printk 854 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "initiate_abts: rport is NULL\n"); printk 860 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "initiate_abts: link is not ready\n"); printk 867 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "abts: couldnt allocate cmd\n"); printk 953 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Unable to alloc cb_arg for seq clnup\n"); printk 960 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "cleanup: couldnt allocate cmd\n"); printk 986 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "call init_seq_cleanup_task\n"); printk 1018 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "cleanup: couldnt allocate cmd\n"); printk 1140 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "eh_abort: link not ready\n"); printk 1152 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "eh_abort: io_req is NULL\n"); printk 1171 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) " printk 1179 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) " printk 1205 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) " printk 1258 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "abort failed, xid = 0x%x\n", printk 1300 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "seq cleanup ignored - xid = 0x%x\n", printk 1310 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "clnup_compl: Unable to send SRR" printk 1414 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Unknown ABTS response\n"); printk 1482 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "lun_rst: abts already in" printk 1515 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "tgt_rst: abts already in progress" printk 1569 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "tmf's fc_hdr r_ctl = 0x%x\n", printk 1573 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "tm_compl: SCp.ptr is NULL\n"); printk 1605 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Command not on active_cmd_queue!\n"); printk 1684 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "byte_count = %d != scsi_bufflen = %d, " printk 1806 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "invalid sns length %d\n", printk 1832 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Truncating sense buffer\n"); printk 1908 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Unable to post io_req\n"); printk 1944 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "scsi_cmd_compl - sc_cmd is NULL\n"); printk 1956 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "SCp.ptr is NULL\n"); printk 2023 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "scsi_cmd_compl: fcp_status = %d\n", printk 2074 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "BD list creation failed\n"); printk 2088 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Flush in progress..Host Busy\n"); printk 2094 drivers/scsi/bnx2fc/bnx2fc_io.c printk(KERN_ERR PFX "Session not ready...post_io\n"); printk 94 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "Failed to allocate conn id for " printk 102 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "Failed to allocate resources\n"); printk 115 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "ofld_req failed\n"); printk 140 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "map doorbell failed - no mem\n"); printk 270 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "CLEANUP on port 0x%x:" printk 332 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "ERROR!! destroy timed out\n"); printk 338 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "ERROR!! DISABLE req failed, destroy" printk 341 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "ERROR!! DISABLE req timed out, destroy" printk 456 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "rport is NULL: ERROR!\n"); printk 468 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "%x - rport_event_handler ERROR\n", printk 533 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_INFO PFX "%x - rport not created Yet!!\n", printk 678 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate SQ memory %d\n", printk 691 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate CQ memory %d\n", printk 704 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate RQ memory %d\n", printk 716 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate RQ PBL %d\n", printk 742 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate XFERQ %d\n", printk 756 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate CONFQ %d\n", printk 770 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate CONFQ PBL %d\n", printk 794 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate conn_db %d\n", printk 809 drivers/scsi/bnx2fc/bnx2fc_tgt.c printk(KERN_ERR PFX "unable to allocate lcq %d\n", printk 118 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n", printk 122 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ERR "bnx2i: LOM is not enable to " printk 565 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n"); printk 690 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n"); printk 693 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n"); printk 696 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n"); printk 1063 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n", printk 1073 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n", printk 1099 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n", printk 1109 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n", printk 1141 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n", printk 1151 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n", printk 1839 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n", printk 1968 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i (%s): cq resr freed in bh execution!", printk 1980 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: Unsolicited " printk 2037 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n", printk 2046 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i (%s): no active cmd! " printk 2094 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid); printk 2098 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid); printk 2127 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid); printk 2131 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid); printk 2136 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "request failed cid %x\n", iscsi_cid); printk 2178 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid); printk 2182 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n", printk 2216 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid); printk 2353 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "iscsi_err - unknown err %x\n", printk 2395 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending " printk 2401 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "conn destroy- error hba mis-match\n"); printk 2406 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "conn_destroy_cmpl: op failed\n"); printk 2430 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "ofld_cmpl: no pend offload request\n"); printk 2435 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n"); printk 2443 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - unable " printk 2448 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid " printk 2455 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid " printk 2499 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: " printk 2514 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n", printk 2666 drivers/scsi/bnx2i/bnx2i_hwi.c printk(KERN_ALERT "bnx2i: private nl message send error\n"); printk 100 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n", printk 198 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ALERT "bnx2i: (%s) chip cleanup for %d active " printk 279 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ALERT "bnx2i: dev %s does not support " printk 293 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ALERT "bnx2i, duplicate registration" printk 296 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "bnx2i, driver not registered\n"); printk 298 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "bnx2i, invalid type %d\n", CNIC_ULP_ISCSI); printk 300 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "bnx2i dev reg, unknown error, %d\n", rc); printk 324 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "bnx2i init: hba initialization failed\n"); printk 331 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "bnx2i - hba %p init failed\n", hba); printk 348 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_INFO "bnx2i_ulp_exit: hba not " printk 472 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_INFO "%s", version); printk 482 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "Could not register bnx2i transport.\n"); printk 489 drivers/scsi/bnx2i/bnx2i_init.c printk(KERN_ERR "Could not register bnx2i cnic driver.\n"); printk 262 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n"); printk 266 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid); printk 389 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "bnx2i: Could not allocate ep\n"); printk 533 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "unable to allocate Middle Path BDT\n"); printk 542 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n"); printk 691 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid); printk 719 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid); printk 1297 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ERR "bnx2i: missing ep.\n"); printk 1673 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i: no route," printk 1682 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i: check route, hba not found\n"); printk 1686 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n", printk 1688 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n", printk 1724 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): - WARN - CONN_DISCON timed out, " printk 1752 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i - conn destroy failed\n"); printk 1815 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): alloc_ep - unable to allocate " printk 1825 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): ep_conn - alloc QP resc error" printk 1841 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n", printk 1846 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): unable to send conn offld kwqe" printk 1864 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n", printk 2065 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): WARNING" printk 2087 drivers/scsi/bnx2i/bnx2i_iscsi.c printk(KERN_ALERT "bnx2i (%s): close/abort(%d) returned %d\n", printk 82 drivers/scsi/bnx2i/bnx2i_sysfs.c printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n"); printk 131 drivers/scsi/bnx2i/bnx2i_sysfs.c printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n"); printk 49 drivers/scsi/bvme6000_scsi.c printk(KERN_ERR "bvme6000-scsi: " printk 66 drivers/scsi/bvme6000_scsi.c printk(KERN_ERR "bvme6000-scsi: No host detected; " printk 75 drivers/scsi/bvme6000_scsi.c printk(KERN_ERR "bvme6000-scsi: request_irq failed\n"); printk 1008 drivers/scsi/ch.c printk(KERN_INFO "SCSI Media Changer driver v" VERSION " \n"); printk 1016 drivers/scsi/ch.c printk("Unable to get major %d for SCSI-Changer\n", printk 1382 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c printk(KERN_INFO "%s", version); printk 2323 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c printk(KERN_INFO "%s", version); printk 113 drivers/scsi/dc395x.c printk(level DC395X_NAME ": " format , ## arg) printk 1108 drivers/scsi/dc395x.c printk(" sglist=%p cnt=%i idx=%i len=%zu\n", printk 1111 drivers/scsi/dc395x.c printk(" state=0x%04x status=0x%02x phase=0x%02x (%sconn.)\n", printk 2193 drivers/scsi/dc395x.c printk(" %02x", byte); printk 2218 drivers/scsi/dc395x.c printk(" %02x", byte); printk 2230 drivers/scsi/dc395x.c printk("\n"); printk 2406 drivers/scsi/dc395x.c printk(" %02x", *virt); printk 2420 drivers/scsi/dc395x.c printk(" |00"); printk 2426 drivers/scsi/dc395x.c printk("\n"); printk 3266 drivers/scsi/dc395x.c printk("sense=0x%02x ASC=0x%02x ASCQ=0x%02x " printk 3273 drivers/scsi/dc395x.c printk("sense=0x%02x No ASC/ASCQ (0x%08x)\n", printk 3432 drivers/scsi/dc395x.c printk("G:%p(%02i-%i) ", p, printk 3462 drivers/scsi/dc395x.c printk("W:%p<%02i-%i>", p, p->device->id, printk 3480 drivers/scsi/dc395x.c printk("\n"); printk 4208 drivers/scsi/dc395x.c printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50"); printk 4210 drivers/scsi/dc395x.c printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)"); printk 4212 drivers/scsi/dc395x.c printk("int50 "); printk 4215 drivers/scsi/dc395x.c printk(" Oops! (All 3?) "); printk 4217 drivers/scsi/dc395x.c printk(" Termination: "); printk 4219 drivers/scsi/dc395x.c printk("Disabled\n"); printk 4222 drivers/scsi/dc395x.c printk("Auto "); printk 4224 drivers/scsi/dc395x.c printk("Low "); printk 4226 drivers/scsi/dc395x.c printk("High "); printk 4227 drivers/scsi/dc395x.c printk("\n"); printk 1184 drivers/scsi/device_handler/scsi_dh_alua.c printk(KERN_ERR "%s: Failed to register scsi device handler", printk 530 drivers/scsi/device_handler/scsi_dh_emc.c printk(KERN_ERR "%s: Failed to register scsi device handler.", printk 805 drivers/scsi/device_handler/scsi_dh_rdac.c printk(KERN_ERR "Failed to register scsi device handler."); printk 815 drivers/scsi/device_handler/scsi_dh_rdac.c printk(KERN_ERR "kmpath_rdacd creation failed.\n"); printk 71 drivers/scsi/dmx3191d.c printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n", printk 249 drivers/scsi/dpt_i2o.c printk("dpti: If you have a lot of devices this could take a few minutes.\n"); printk 252 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Reading the hardware resource table.\n", pHba->name); printk 267 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"dpti: unable to create dpt_i2o class\n"); printk 284 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"dpti%d: unable to " printk 330 drivers/scsi/dpt_i2o.c printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name); printk 390 drivers/scsi/dpt_i2o.c printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode); printk 609 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Too many outstanding " printk 646 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Trying to Abort\n",pHba->name); printk 648 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Unable to abort: No device in cmnd\n",pHba->name); printk 666 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Abort cmd not supported\n",pHba->name); printk 669 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Abort failed.\n",pHba->name); printk 672 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Abort complete.\n",pHba->name); printk 690 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Trying to reset device\n",pHba->name); printk 692 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Reset Device: Device Not found\n",pHba->name); printk 711 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Device reset not supported\n",pHba->name); printk 714 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Device reset failed\n",pHba->name); printk 717 drivers/scsi/dpt_i2o.c printk(KERN_INFO"%s: Device reset successful\n",pHba->name); printk 733 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Bus reset: SCSI Bus %d: tid: %d\n",pHba->name, cmd->device->channel,pHba->channel[cmd->device->channel].tid ); printk 744 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Bus reset failed.\n",pHba->name); printk 747 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Bus reset success.\n",pHba->name); printk 761 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Hba Reset: scsi id %d: tid: %d\n", name, cmd->device->channel, pHba->channel[cmd->device->channel].tid); printk 764 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: HBA reset complete\n", name); printk 767 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: HBA reset failed (%x)\n", name, rcode); printk 792 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Could not activate\n", pHba->name); printk 835 drivers/scsi/dpt_i2o.c printk(KERN_INFO "Shutting down Adaptec I2O controllers.\n"); printk 836 drivers/scsi/dpt_i2o.c printk(KERN_INFO " This could take a few minutes if there are many devices attached\n"); printk 859 drivers/scsi/dpt_i2o.c printk(KERN_INFO "Adaptec I2O controllers down.\n"); printk 1010 drivers/scsi/dpt_i2o.c printk(KERN_INFO "Adaptec I2O RAID controller" printk 1016 drivers/scsi/dpt_i2o.c printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d%s\n", printk 1019 drivers/scsi/dpt_i2o.c printk(KERN_INFO" BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size); printk 1020 drivers/scsi/dpt_i2o.c printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size); printk 1024 drivers/scsi/dpt_i2o.c printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name, pDev->irq); printk 1204 drivers/scsi/dpt_i2o.c printk(KERN_INFO"dpti%d: POST WAIT TIMEOUT\n",pHba->unit); printk 1246 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"dpti%d: Timeout waiting for message frame!\n", pHba->unit); printk 1293 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG"dpti: Could Not find task %d in wait queue\n",context); printk 1294 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG" Tasks in wait queue:\n"); printk 1296 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG" %d\n",p1->id); printk 1322 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"Timeout waiting for message!\n"); printk 1331 drivers/scsi/dpt_i2o.c printk(KERN_ERR"IOP reset failed - no free memory.\n"); printk 1352 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name); printk 1374 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name); printk 1389 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Reset reject, trying to clear\n", printk 1419 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: LCT is empty???\n",pHba->name); printk 1450 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Channel number %d out of range \n", pHba->name, bus_no); printk 1454 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: SCSI ID %d out of range \n", pHba->name, bus_no); printk 1471 drivers/scsi/dpt_i2o.c printk(KERN_CRIT"%s: Out of memory for I2O device data.\n",pHba->name); printk 1505 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Channel number %d out of range - LCT\n", pHba->name, bus_no); printk 1562 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"Could not find SCSI ID for %s\n", printk 1699 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could not allocate reply buffer\n",pHba->name); printk 1720 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG"%s:IOCTL SG List too large (%u)\n", pHba->name,sg_count); printk 1729 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG"%s:Bad SG element %d - not simple (%x)\n",pHba->name,i, sg[i].flag_count); printk 1737 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n", printk 1747 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG"%s: Could not copy SG buf %d FROM user\n",pHba->name,i); printk 1768 drivers/scsi/dpt_i2o.c printk("adpt_i2o_passthru: post wait failed %d %p\n", printk 1815 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus); printk 1827 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could not copy message context FROM user\n",pHba->name); printk 1831 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could not copy reply TO user\n",pHba->name); printk 1943 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"dpti: Could not copy buffer TO user\n"); printk 2001 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could not copy HbaInfo TO user\n",pHba->name); printk 2095 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"adpt_isr: NULL dev_id\n"); printk 2109 drivers/scsi/dpt_i2o.c printk(KERN_ERR"dpti: Could not get reply frame\n"); printk 2120 drivers/scsi/dpt_i2o.c printk(KERN_ERR "dpti: reply frame not from pool\n"); printk 2130 drivers/scsi/dpt_i2o.c printk(KERN_ERR"%s: Bad preserved MFA (%x)- dropping frame\n",pHba->name,old_m); printk 2163 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context); printk 2231 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: scsi opcode 0x%x not supported.\n", printk 2292 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"Cmd len %08X Cmd underflow %08X\n", printk 2318 drivers/scsi/dpt_i2o.c printk("%s: scsi_host_alloc returned NULL\n", pHba->name); printk 2371 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name); printk 2383 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: SCSI Timeout-Device (%d,%d,%llu) hba status=0x%x, dev status=0x%x, cmd=0x%x\n", printk 2396 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: SCSI CMD parity error\n",pHba->name); printk 2423 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: SCSI error %0x-Device(%d,%d,%llu) hba_status=0x%x, dev_status=0x%x, cmd=0x%x\n", printk 2440 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: SCSI Data Protect-Device (%d,%d,%llu) hba_status=0x%x, dev_status=0x%x, cmd=0x%x\n", printk 2452 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: I2O MSG_FAIL - Device (%d,%d,%llu) tid=%d, cmd=0x%x\n", printk 2499 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: LCT is empty???\n",pHba->name); printk 2516 drivers/scsi/dpt_i2o.c printk(KERN_INFO "%s: LCT has %d entries.\n", pHba->name,max); printk 2528 drivers/scsi/dpt_i2o.c printk(KERN_ERR"%s: Could not query device\n",pHba->name); printk 2533 drivers/scsi/dpt_i2o.c printk(KERN_WARNING printk 2554 drivers/scsi/dpt_i2o.c printk(KERN_CRIT "Out of memory for I2O device data.\n"); printk 2609 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Setting device (%d,%d,%llu) back online\n", printk 2641 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Device (%d,%d,%llu) offline\n",pHba->name,pDev->scsi_channel,pDev->scsi_id,pDev->scsi_lun); printk 2684 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could NOT reset.\n", pHba->name); printk 2688 drivers/scsi/dpt_i2o.c printk(KERN_INFO "HBA not responding.\n"); printk 2694 drivers/scsi/dpt_i2o.c printk(KERN_CRIT "%s: hardware fault\n", pHba->name); printk 2704 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Failed to initialize.\n", pHba->name); printk 2710 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could NOT reset.\n", pHba->name); printk 2758 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Timeout waiting for message frame!\n",pHba->name); printk 2791 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Timeout waiting for message frame\n",pHba->name); printk 2802 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n", printk 2829 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name); printk 2857 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name); printk 2895 drivers/scsi/dpt_i2o.c printk(KERN_ERR printk 2911 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Timeout waiting for message !\n", printk 2937 drivers/scsi/dpt_i2o.c printk(KERN_ERR"dpti%d: Get status timeout.\n", printk 2974 drivers/scsi/dpt_i2o.c printk("dpti%d: State = ",pHba->unit); printk 2977 drivers/scsi/dpt_i2o.c printk("INIT\n"); printk 2980 drivers/scsi/dpt_i2o.c printk("RESET\n"); printk 2983 drivers/scsi/dpt_i2o.c printk("HOLD\n"); printk 2986 drivers/scsi/dpt_i2o.c printk("READY\n"); printk 2989 drivers/scsi/dpt_i2o.c printk("OPERATIONAL\n"); printk 2992 drivers/scsi/dpt_i2o.c printk("FAILED\n"); printk 2995 drivers/scsi/dpt_i2o.c printk("FAULTED\n"); printk 2998 drivers/scsi/dpt_i2o.c printk("%x (unknown!!)\n",pHba->status_block->iop_state); printk 3022 drivers/scsi/dpt_i2o.c printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n", printk 3039 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n", printk 3041 drivers/scsi/dpt_i2o.c printk(KERN_ERR"Adaptec: Error Reading Hardware.\n"); printk 3092 drivers/scsi/dpt_i2o.c printk(KERN_WARNING "SysTab Set failed. Out of memory.\n"); printk 3128 drivers/scsi/dpt_i2o.c printk(KERN_DEBUG"sys_tbl_len=%d in 32bit words\n",(sys_tbl_len >>2)); printk 3130 drivers/scsi/dpt_i2o.c printk(KERN_INFO "sys_tbl[%d] = %0#10x\n", printk 3149 drivers/scsi/dpt_i2o.c printk(KERN_INFO "TID %3.3d ", unit); printk 3154 drivers/scsi/dpt_i2o.c printk(" Vendor: %-12.12s", buf); printk 3159 drivers/scsi/dpt_i2o.c printk(" Device: %-12.12s", buf); printk 3164 drivers/scsi/dpt_i2o.c printk(" Rev: %-12.12s\n", buf); printk 3167 drivers/scsi/dpt_i2o.c printk(KERN_INFO "\tClass: %.21s\n", adpt_i2o_get_class_name(d->lct_data.class_id)); printk 3168 drivers/scsi/dpt_i2o.c printk(KERN_INFO "\tSubclass: 0x%04X\n", d->lct_data.sub_class); printk 3169 drivers/scsi/dpt_i2o.c printk(KERN_INFO "\tFlags: "); printk 3172 drivers/scsi/dpt_i2o.c printk("C"); // ConfigDialog requested printk 3174 drivers/scsi/dpt_i2o.c printk("U"); // Multi-user capable printk 3176 drivers/scsi/dpt_i2o.c printk("P"); // Peer service enabled! printk 3178 drivers/scsi/dpt_i2o.c printk("M"); // Mgmt service enabled! printk 3179 drivers/scsi/dpt_i2o.c printk("\n"); printk 3259 drivers/scsi/dpt_i2o.c printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name); printk 3272 drivers/scsi/dpt_i2o.c printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret); printk 3305 drivers/scsi/dpt_i2o.c printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name); printk 3314 drivers/scsi/dpt_i2o.c printk(KERN_CRIT "%s: query operation failed; Out of memory.\n", printk 3329 drivers/scsi/dpt_i2o.c printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name); printk 3334 drivers/scsi/dpt_i2o.c printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name); printk 3376 drivers/scsi/dpt_i2o.c printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va); printk 3381 drivers/scsi/dpt_i2o.c printk(KERN_WARNING "%s: %s - Error:\n ErrorInfoSize = 0x%02x, " printk 3414 drivers/scsi/dpt_i2o.c printk(KERN_INFO"dpti%d: Unable to quiesce (status=%#x).\n", printk 3417 drivers/scsi/dpt_i2o.c printk(KERN_INFO"dpti%d: Quiesced.\n",pHba->unit); printk 3450 drivers/scsi/dpt_i2o.c printk(KERN_WARNING"%s: Could not enable (status=%#10x).\n", printk 3486 drivers/scsi/dpt_i2o.c printk(KERN_INFO "%s: Unable to set SysTab (status=%#10x).\n", printk 3539 drivers/scsi/dpt_i2o.c printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); printk 87 drivers/scsi/dpti.h # define PDEBUG(fmt, args...) printk(KERN_DEBUG "dpti: " fmt, ##args) printk 88 drivers/scsi/dpti.h # define PDEBUGV(fmt, args...) printk(KERN_DEBUG "dpti: " fmt, ##args) printk 94 drivers/scsi/dpti.h #define PERROR(fmt, args...) printk(KERN_ERR fmt, ##args) printk 95 drivers/scsi/dpti.h #define PWARN(fmt, args...) printk(KERN_WARNING fmt, ##args) printk 96 drivers/scsi/dpti.h #define PINFO(fmt, args...) printk(KERN_INFO fmt, ##args) printk 97 drivers/scsi/dpti.h #define PCRIT(fmt, args...) printk(KERN_CRIT fmt, ##args) printk 165 drivers/scsi/esas2r/esas2r_log.c printk("%s\n", event_buffer); printk 866 drivers/scsi/esp_scsi.c printk("ESP: tgt[%d] lun[%d] scsi_cmd [ ", tgt, lun); printk 868 drivers/scsi/esp_scsi.c printk("%02x ", cmd->cmnd[i]); printk 869 drivers/scsi/esp_scsi.c printk("]\n"); printk 928 drivers/scsi/esp_scsi.c printk("esp%d: tgt[%d] lun[%d] AUTO SENSE[ ", printk 931 drivers/scsi/esp_scsi.c printk("%02x ", cmd->sense_buffer[i]); printk 932 drivers/scsi/esp_scsi.c printk("]\n"); printk 1902 drivers/scsi/esp_scsi.c printk("ESP: Sending message [ "); printk 1904 drivers/scsi/esp_scsi.c printk("%02x ", esp->msg_out[i]); printk 1905 drivers/scsi/esp_scsi.c printk("]\n"); printk 831 drivers/scsi/fcoe/fcoe.c printk(KERN_INFO "fcoe: Failed to retrieve FDMI " printk 874 drivers/scsi/fcoe/fcoe.c printk(KERN_INFO "fcoe: No FDMI support.\n"); printk 963 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe_em_config: failed to add " printk 973 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe_em_config: failed to allocate " printk 987 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe_em_config: failed to " printk 1266 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n"); printk 1647 drivers/scsi/fcoe/fcoe.c printk(KERN_WARNING "fcoe: dropping frame with CRC error\n"); printk 1692 drivers/scsi/fcoe/fcoe.c printk(KERN_WARNING "fcoe: FCoE version " printk 2227 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe: Failed to create interface (%s)\n", printk 2484 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "failed to register an fcoe transport, check " printk 2671 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe: Failed to create vport, " printk 2684 drivers/scsi/fcoe/fcoe.c printk(KERN_ERR "fcoe: fcoe_vport_create(%s) failed\n", printk 336 drivers/scsi/fcoe/fcoe_ctlr.c printk(KERN_NOTICE "libfcoe: host%d: " printk 342 drivers/scsi/fcoe/fcoe_ctlr.c printk(KERN_INFO "libfcoe: host%d: FIP selected " printk 836 drivers/scsi/fcoe/fcoe_ctlr.c printk(KERN_INFO "libfcoe: host%d: " printk 1054 drivers/scsi/fcoe/fcoe_ctlr.c printk(KERN_ERR "Failed to allocate sysfs instance " printk 696 drivers/scsi/fcoe/fcoe_sysfs.c printk(KERN_ERR printk 718 drivers/scsi/fcoe/fcoe_sysfs.c printk(KERN_ERR printk 736 drivers/scsi/fcoe/fcoe_sysfs.c printk(KERN_ERR printk 760 drivers/scsi/fcoe/fcoe_sysfs.c printk(KERN_ERR printk 627 drivers/scsi/fcoe/fcoe_transport.c printk(KERN_ERR "FCoE transport %s is still attached!\n", printk 641 drivers/scsi/fcoe/fcoe_transport.c printk(KERN_ERR "Unable to allocate netdev_mapping"); printk 686 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "Dropped FIP frame, as firmware " printk 693 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "fnic ctlr frame trace error!!!"); printk 925 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "fnic ctlr frame trace error!!!"); printk 999 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "PCI mapping failed with error %d\n", r); printk 1046 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "fnic ctlr frame trace error!!!"); printk 1051 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "fnic ctlr frame trace error!!!"); printk 1058 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "DMA mapping failed\n"); printk 1134 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "DMA map failed with error %d\n", ret); printk 1140 drivers/scsi/fnic/fnic_fcs.c printk(KERN_ERR "fnic ctlr frame trace error!!!"); printk 575 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "Unable to alloc libfc local port\n"); printk 1033 drivers/scsi/fnic/fnic_main.c printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION); printk 1038 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "Failed to create fnic directory " printk 1046 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX printk 1055 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "FC trace buffer initialization Failed " printk 1067 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n"); printk 1079 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "failed to create fnic max sgl slab\n"); printk 1089 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "failed to create fnic io_req slab\n"); printk 1096 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "fnic work queue create failed\n"); printk 1106 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "fnic FIP work queue create failed\n"); printk 1113 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "fc_attach_transport error\n"); printk 1121 drivers/scsi/fnic/fnic_main.c printk(KERN_ERR PFX "pci register error\n"); printk 348 drivers/scsi/fnic/fnic_scsi.c printk(KERN_ERR "DMA mapping failed\n"); printk 361 drivers/scsi/fnic/fnic_scsi.c printk(KERN_ERR "DMA mapping failed\n"); printk 1698 drivers/scsi/fnic/fnic_scsi.c printk(KERN_ERR "fnic_terminate_rport_io: rport is NULL\n"); printk 1704 drivers/scsi/fnic/fnic_scsi.c printk(KERN_ERR "fnic_terminate_rport_io: rdata is NULL\n"); printk 1710 drivers/scsi/fnic/fnic_scsi.c printk(KERN_ERR "fnic_terminate_rport_io: lport is NULL\n"); printk 484 drivers/scsi/fnic/fnic_trace.c printk(KERN_ERR PFX "Failed to allocate memory " printk 494 drivers/scsi/fnic/fnic_trace.c printk(KERN_ERR PFX "Failed to allocate memory for" printk 540 drivers/scsi/fnic/fnic_trace.c printk(KERN_INFO PFX "Successfully Freed Trace Buffer\n"); printk 41 drivers/scsi/fnic/vnic_cq.c printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index); printk 95 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "vNIC BAR0 res hdr length error\n"); printk 101 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n"); printk 107 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "vNIC BAR0 res magic/version error " printk 136 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "vNIC BAR0 resource %d " printk 228 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR printk 276 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd)); printk 300 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "Error %d devcmd %d\n", printk 315 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd)); printk 730 drivers/scsi/fnic/vnic_dev.c printk(KERN_ERR "Can't set packet filter\n"); printk 40 drivers/scsi/fnic/vnic_intr.c printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n", printk 36 drivers/scsi/fnic/vnic_rq.c printk(KERN_ERR "Failed to alloc rq_bufs\n"); printk 92 drivers/scsi/fnic/vnic_rq.c printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index); printk 160 drivers/scsi/fnic/vnic_rq.c printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index); printk 56 drivers/scsi/fnic/vnic_wq.c printk(KERN_ERR "Failed to alloc wq_bufs\n"); printk 112 drivers/scsi/fnic/vnic_wq.c printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index); printk 217 drivers/scsi/fnic/vnic_wq.c printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index); printk 43 drivers/scsi/fnic/vnic_wq_copy.c printk(KERN_ERR "Failed to disable Copy WQ[%d]," printk 89 drivers/scsi/fnic/vnic_wq_copy.c printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index); printk 715 drivers/scsi/g_NCR5380.c printk(KERN_WARNING "Card not found at address 0x%03x\n", printk 168 drivers/scsi/gdth.c #define TRACE(a) {if (DebugState==1) {printk a;}} printk 169 drivers/scsi/gdth.c #define TRACE2(a) {if (DebugState==1 || DebugState==2) {printk a;}} printk 170 drivers/scsi/gdth.c #define TRACE3(a) {if (DebugState!=0) {printk a;}} printk 533 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 540 drivers/scsi/gdth.c printk("GDT-PCI: Cannot access DPMEM at 0x%lx (shadowed?)\n", printk 547 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 558 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 564 drivers/scsi/gdth.c printk("GDT-PCI: Use free address at 0x%x\n", i); printk 570 drivers/scsi/gdth.c printk("GDT-PCI: No free address found!\n"); printk 577 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM write error)\n"); printk 595 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DEINIT failed)\n"); printk 605 drivers/scsi/gdth.c printk("GDT-PCI: Illegal protocol version\n"); printk 624 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error\n"); printk 641 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 649 drivers/scsi/gdth.c printk("GDT-PCI: Cannot access DPMEM at 0x%lx (shadowed?)\n", printk 656 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 667 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 673 drivers/scsi/gdth.c printk("GDT-PCI: Use free address at 0x%x\n", i); printk 679 drivers/scsi/gdth.c printk("GDT-PCI: No free address found!\n"); printk 686 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM write error)\n"); printk 707 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DEINIT failed)\n"); printk 716 drivers/scsi/gdth.c printk("GDT-PCI: Illegal protocol version\n"); printk 737 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error\n"); printk 751 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 771 drivers/scsi/gdth.c printk("GDT-PCI: Cannot access DPMEM at 0x%lx (shadowed?)\n", printk 778 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 789 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DPMEM remap error)\n"); printk 795 drivers/scsi/gdth.c printk("GDT-PCI: Use free address at 0x%x\n", i); printk 801 drivers/scsi/gdth.c printk("GDT-PCI: No free address found!\n"); printk 822 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DEINIT failed)\n"); printk 831 drivers/scsi/gdth.c printk("GDT-PCI: Illegal protocol version\n"); printk 850 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error\n"); printk 865 drivers/scsi/gdth.c printk("GDT-PCI: Initialization error (DEINIT failed)\n"); printk 1147 drivers/scsi/gdth.c printk("GDT: Initialization error (timeout service %d)\n",service); printk 1187 drivers/scsi/gdth.c printk("GDT-HA %d: Initialization error screen service (code %d)\n", printk 1207 drivers/scsi/gdth.c printk("GDT-HA %d: Initialization error cache service (code %d)\n", printk 1242 drivers/scsi/gdth.c printk("GDT-HA %d: Error detecting channel count (0x%x)\n", printk 1260 drivers/scsi/gdth.c printk("GDT-HA %d: Initialization error cache service (code %d)\n", printk 1389 drivers/scsi/gdth.c printk("GDT-HA %d: Initialization error raw service (code %d)\n", printk 1433 drivers/scsi/gdth.c printk("GDT-HA %d: Error raw service (RESERVE, code %d)\n", printk 1447 drivers/scsi/gdth.c printk("GDT-HA %d: Vendor: %s Name: %s\n", printk 1455 drivers/scsi/gdth.c printk("GDT-HA %d: Name: %s\n", printk 1790 drivers/scsi/gdth.c printk("GDT-HA %d: Unknown SCSI command 0x%x to cache service !\n", printk 1820 drivers/scsi/gdth.c printk("GDT-HA %d: Command %d timed out !\n", printk 1850 drivers/scsi/gdth.c printk("GDT-HA %d: invalid sc/gt element in gdth_copy_internal_data()\n", printk 1865 drivers/scsi/gdth.c printk("GDT-HA %d: SCSI command with no buffers but data transfer expected!\n", printk 2663 drivers/scsi/gdth.c printk("%s",msg->msg_text); printk 2720 drivers/scsi/gdth.c printk("\n"); printk 3034 drivers/scsi/gdth.c printk("[PCI %d/%d] ",(u16)(ha->brd_phys>>8), printk 3076 drivers/scsi/gdth.c printk("Adapter %d: %s\n",dvr->eu.async.ionode,dvr->event_string); printk 3106 drivers/scsi/gdth.c printk(&f[(int)f[0]],stack); printk 3107 drivers/scsi/gdth.c printk("\n"); printk 3114 drivers/scsi/gdth.c printk("GDT HA %u, Unknown async. event service %d event no. %d\n", printk 4110 drivers/scsi/gdth.c printk("Configuring GDT-PCI HA at %d/%d IRQ %u\n", printk 4118 drivers/scsi/gdth.c printk("GDT-PCI: Unable to allocate IRQ\n"); printk 4157 drivers/scsi/gdth.c printk("GDT-PCI %d: Error during device scan\n", ha->hanum); printk 4169 drivers/scsi/gdth.c printk(KERN_WARNING "GDT-PCI %d: " printk 4176 drivers/scsi/gdth.c printk("GDT-PCI %d: 64-bit DMA enabled\n", ha->hanum); printk 4178 drivers/scsi/gdth.c printk(KERN_WARNING "GDT-PCI %d: " printk 4271 drivers/scsi/gdth.c printk("GDT-HA: Controller driver disabled from" printk 4276 drivers/scsi/gdth.c printk("GDT-HA: Storage RAID Controller Driver. Version: %s\n", printk 55 drivers/scsi/gdth_proc.c printk("GDT: Flushing host drive %d .. ",drive); printk 57 drivers/scsi/gdth_proc.c printk("GDT: Flushing all host drives .. "); printk 78 drivers/scsi/gdth_proc.c printk("\nNo host drive found !\n"); printk 80 drivers/scsi/gdth_proc.c printk("Done.\n"); printk 87 drivers/scsi/gdth_proc.c printk("GDT: Disabling write back permanently .. "); printk 92 drivers/scsi/gdth_proc.c printk("GDT: Enabling write back permanently .. "); printk 97 drivers/scsi/gdth_proc.c printk("GDT: Disabling write back commands .. "); printk 100 drivers/scsi/gdth_proc.c printk("Done.\n"); printk 102 drivers/scsi/gdth_proc.c printk("Not supported !\n"); printk 108 drivers/scsi/gdth_proc.c printk("GDT: Enabling write back commands .. "); printk 110 drivers/scsi/gdth_proc.c printk("Done.\n"); printk 143 drivers/scsi/gdth_proc.c printk("Done.\n"); printk 147 drivers/scsi/gdth_proc.c printk("GDT: Unknown command: %s Length: %d\n",buffer,length); printk 8611 drivers/scsi/hpsa.c printk(KERN_INFO DRIVER_NAME "\n"); printk 578 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: fail to start background task\n", printk 594 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: pci resource invalid\n", printk 604 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", printk 1086 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no); printk 1103 drivers/scsi/hptiop.c printk(KERN_WARNING "hptiop_reset(%d/%d/%d)\n", printk 1292 drivers/scsi/hptiop.c printk(KERN_ERR "hptiop: fail to enable pci device\n"); printk 1296 drivers/scsi/hptiop.c printk(KERN_INFO "adapter at PCI %d:%d:%d, IRQ %d\n", printk 1310 drivers/scsi/hptiop.c printk(KERN_ERR "hptiop: fail to set dma_mask\n"); printk 1315 drivers/scsi/hptiop.c printk(KERN_ERR "hptiop: pci_request_regions failed\n"); printk 1321 drivers/scsi/hptiop.c printk(KERN_ERR "hptiop: fail to alloc scsi host\n"); printk 1350 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: firmware not ready\n", printk 1357 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: internal_memalloc failed\n", printk 1364 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: get config failed\n", printk 1380 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: internal_memalloc failed\n", printk 1385 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: reset comm failed\n", printk 1413 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: set config failed\n", printk 1422 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: request irq %d failed\n", printk 1440 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: fail to alloc request mem\n", printk 1466 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: scsi_add_host failed\n", printk 1516 drivers/scsi/hptiop.c printk(KERN_ERR "scsi%d: shutdown the iop timeout\n", printk 1690 drivers/scsi/hptiop.c printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver); printk 369 drivers/scsi/hptiop.h #define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0) printk 4986 drivers/scsi/ibmvscsi/ibmvfc.c printk(KERN_INFO IBMVFC_NAME": IBM Virtual Fibre Channel Driver version: %s %s\n", printk 756 drivers/scsi/ibmvscsi/ibmvfc.h #define ENTER DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Entering %s\n", __func__)) printk 757 drivers/scsi/ibmvscsi/ibmvfc.h #define LEAVE DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Leaving %s\n", __func__)) printk 569 drivers/scsi/ibmvscsi/ibmvscsi.c printk(KERN_ERR "ibmvscsi: found no event struct in pool!\n"); printk 135 drivers/scsi/imm.c printk("imm /proc: invalid variable\n"); printk 150 drivers/scsi/imm.c #define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\ printk 214 drivers/scsi/imm.c printk("imm timeout in imm_wait\n"); printk 259 drivers/scsi/imm.c printk printk 294 drivers/scsi/imm.c printk("imm: ECP sync failed as data still present in FIFO.\n"); printk 360 drivers/scsi/imm.c printk("IMM: returned SCSI status %2x\n", r); printk 391 drivers/scsi/imm.c printk("IMM: bug in imm_out()\n"); printk 445 drivers/scsi/imm.c printk("IMM: bug in imm_ins()\n"); printk 736 drivers/scsi/imm.c printk("imm: no device at SCSI ID %i\n", cmd->device->id); printk 739 drivers/scsi/imm.c printk("imm: BUS BUSY - EPP timeout detected\n"); printk 742 drivers/scsi/imm.c printk("imm: unknown timeout\n"); printk 745 drivers/scsi/imm.c printk("imm: told to abort\n"); printk 748 drivers/scsi/imm.c printk("imm: parity error (???)\n"); printk 751 drivers/scsi/imm.c printk("imm: internal driver error\n"); printk 754 drivers/scsi/imm.c printk("imm: told to reset device\n"); printk 757 drivers/scsi/imm.c printk("imm: bad interrupt (???)\n"); printk 760 drivers/scsi/imm.c printk("imm: bad return code (%02x)\n", printk 909 drivers/scsi/imm.c printk("imm: Invalid scsi phase\n"); printk 920 drivers/scsi/imm.c printk("IMM: bug in imm_queuecommand\n"); printk 1029 drivers/scsi/imm.c printk("imm: Found device at ID %i, Attempting to use %s\n", printk 1049 drivers/scsi/imm.c printk("imm: Unable to establish communication\n"); printk 1074 drivers/scsi/imm.c printk printk 1079 drivers/scsi/imm.c printk printk 1089 drivers/scsi/imm.c printk("imm: No devices found\n"); printk 1193 drivers/scsi/imm.c printk(KERN_ERR "imm%d: failed to claim parport because " printk 1292 drivers/scsi/imm.c printk("imm: Version %s\n", IMM_VERSION); printk 637 drivers/scsi/initio.c printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n", printk 642 drivers/scsi/initio.c printk(KERN_INFO "i91u: Reset SCSI Bus ... \n"); printk 664 drivers/scsi/initio.c printk("find scb at %p\n", scb); printk 688 drivers/scsi/initio.c printk("Release SCB %p; ", cmnd); printk 709 drivers/scsi/initio.c printk("Append pend SCB %p; ", scbp); printk 727 drivers/scsi/initio.c printk("Push pend SCB %p; ", scbp); printk 770 drivers/scsi/initio.c printk("unlink pend SCB %p; ", scb); printk 796 drivers/scsi/initio.c printk("append busy SCB %p; ", scbp); printk 829 drivers/scsi/initio.c printk("Pop busy SCB %p; ", tmp); printk 840 drivers/scsi/initio.c printk("unlink busy SCB %p; ", scb); printk 883 drivers/scsi/initio.c printk("find busy SCB %p; ", tmp); printk 891 drivers/scsi/initio.c printk("append done SCB %p; ", scbp); printk 915 drivers/scsi/initio.c printk("find done SCB %p; ",tmp); printk 1007 drivers/scsi/initio.c printk("initio_bad_seg c=%d\n", host->index); printk 1299 drivers/scsi/initio.c printk("-s1-"); printk 1354 drivers/scsi/initio.c printk("-s2-"); printk 1385 drivers/scsi/initio.c printk("-s3-"); printk 1450 drivers/scsi/initio.c printk("-s4-"); printk 1515 drivers/scsi/initio.c printk("-s5-"); printk 1603 drivers/scsi/initio.c printk("-s6-"); printk 1648 drivers/scsi/initio.c printk("-s7-"); printk 2691 drivers/scsi/initio.c printk("bios geometry: head=%d, sec=%d, cyl=%d\n", printk 2693 drivers/scsi/initio.c printk("WARNING: check, if the bios geometry is correct.\n"); printk 2747 drivers/scsi/initio.c printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n"); printk 2786 drivers/scsi/initio.c printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat); printk 2829 drivers/scsi/initio.c printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n"); printk 2835 drivers/scsi/initio.c printk(KERN_WARNING "initio: Could not allocate host structure.\n"); printk 2845 drivers/scsi/initio.c printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); printk 2862 drivers/scsi/initio.c printk(KERN_WARNING "initio: Cannot allocate SCB array.\n"); printk 2904 drivers/scsi/initio.c printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq); printk 1778 drivers/scsi/ipr.h #define ipr_err(...) printk(KERN_ERR IPR_NAME ": "__VA_ARGS__) printk 1779 drivers/scsi/ipr.h #define ipr_info(...) printk(KERN_INFO IPR_NAME ": "__VA_ARGS__) printk 1780 drivers/scsi/ipr.h #define ipr_dbg(...) IPR_DBG_CMD(printk(KERN_INFO IPR_NAME ": "__VA_ARGS__)) printk 1783 drivers/scsi/ipr.h printk(level IPR_NAME ": %d:%d:%d:%d: " fmt, (ioa_cfg)->host->host_no, \ printk 1790 drivers/scsi/ipr.h printk(level IPR_NAME ": %d:%d:%d:%d: " fmt, (ioa_cfg)->host->host_no, \ printk 1811 drivers/scsi/ipr.h printk(KERN_ERR IPR_NAME ": %s: " fmt, \ printk 1830 drivers/scsi/ipr.h #define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __func__)) printk 1831 drivers/scsi/ipr.h #define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __func__)) printk 215 drivers/scsi/ips.c #define METHOD_TRACE(s, i) if (ips_debug >= (i+10)) printk(KERN_NOTICE s "\n"); printk 216 drivers/scsi/ips.c #define DEBUG(i, s) if (ips_debug >= i) printk(KERN_NOTICE s "\n"); printk 217 drivers/scsi/ips.c #define DEBUG_VAR(i, s, v...) if (ips_debug >= i) printk(KERN_NOTICE s "\n", v); printk 655 drivers/scsi/ips.c printk(KERN_WARNING printk 1684 drivers/scsi/ips.c printk(KERN_WARNING "Unable to allocate a flash buffer\n"); printk 6734 drivers/scsi/ips.c printk(KERN_ERR "ips: This driver has only been tested on the x86/ia64/x86_64 platforms\n"); printk 6932 drivers/scsi/ips.c printk(KERN_WARNING "Unable to set DMA Mask\n"); printk 844 drivers/scsi/iscsi_tcp.c printk(KERN_ERR "iscsi_tcp: invalid ep %p.\n", ep); printk 1031 drivers/scsi/iscsi_tcp.c printk(KERN_ERR "iscsi_tcp: Invalid max_lun value of %u\n", printk 122 drivers/scsi/lasi700.c printk(KERN_ERR "lasi700: request_irq failed!\n"); printk 441 drivers/scsi/libfc/fc_disc.c printk(KERN_WARNING "libfc: Failed to allocate " printk 543 drivers/scsi/libfc/fc_fcp.c printk(KERN_WARNING "libfc: CRC error on data " printk 2174 drivers/scsi/libfc/fc_fcp.c printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n"); printk 2256 drivers/scsi/libfc/fc_fcp.c printk(KERN_ERR "libfc: Leaked SCSI packets when destroying " printk 2273 drivers/scsi/libfc/fc_fcp.c printk(KERN_ERR "libfc: Unable to allocate SRB cache, " printk 558 drivers/scsi/libfc/fc_lport.c printk(KERN_INFO "host%d: libfc: Link up on port (%6.6x)\n", printk 588 drivers/scsi/libfc/fc_lport.c printk(KERN_INFO "host%d: libfc: Link down on port (%6.6x)\n", printk 692 drivers/scsi/libfc/fc_lport.c printk(KERN_ERR "host%d: libfc: " printk 737 drivers/scsi/libfc/fc_lport.c printk(KERN_INFO "host%d: Assigned Port ID %6.6x\n", printk 808 drivers/scsi/libfc/fc_lport.c printk(KERN_WARNING "host%d: libfc: Received FLOGI from port " printk 1755 drivers/scsi/libfc/fc_lport.c printk(KERN_INFO "host%d: libfc: " printk 2698 drivers/scsi/libiscsi.c printk(KERN_ERR "Invalid state. Cannot notify host removal " printk 2756 drivers/scsi/libiscsi.c printk(KERN_ERR "iscsi: invalid can_queue of %d. can_queue " printk 2763 drivers/scsi/libiscsi.c printk(KERN_ERR "iscsi: invalid can_queue of %d. can_queue " printk 2770 drivers/scsi/libiscsi.c printk(KERN_ERR "iscsi: invalid can_queue of %d. can_queue " printk 2775 drivers/scsi/libiscsi.c printk(KERN_INFO "iscsi: Rounding can_queue to %d.\n", printk 363 drivers/scsi/libsas/sas_ata.c r = printk("%s" SAS_FMT "ata%u: %s: %pV", printk 352 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "%s\n", line_buf); printk 357 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "%s\n", line_buf); printk 370 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "%s\n", line_buf); printk 400 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "\n"); printk 534 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "DAT RQ: RQ[Qid:%d]\n", printk 548 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "HDR RQ: RQ[Qid:%d]\n", printk 599 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "MBX WQ[Qid:%d]\n", qid); printk 616 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "HDR RQ[Qid:%d]\n", qid); printk 621 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "DAT RQ[Qid:%d]\n", qid); printk 685 drivers/scsi/lpfc/lpfc_debugfs.h printk(KERN_ERR "FCP EQ[Idx:%d|Qid:%d]\n", eq_idx, qid); printk 7414 drivers/scsi/lpfc/lpfc_els.c printk("Fix me....\n"); printk 89 drivers/scsi/lpfc/lpfc_hbadisc.c printk(KERN_ERR "Cannot find remote node" printk 7135 drivers/scsi/lpfc/lpfc_init.c printk(KERN_ERR "%s: only allocated %d iocbs of " printk 7144 drivers/scsi/lpfc/lpfc_init.c printk(KERN_ERR "%s: failed to allocate IOTAG. " printk 12384 drivers/scsi/lpfc/lpfc_init.c printk(KERN_ERR "lpfc: Cannot re-enable " printk 13190 drivers/scsi/lpfc/lpfc_init.c printk(KERN_ERR "lpfc: Cannot re-enable " printk 13607 drivers/scsi/lpfc/lpfc_init.c printk(LPFC_MODULE_DESC "\n"); printk 13608 drivers/scsi/lpfc/lpfc_init.c printk(LPFC_COPYRIGHT "\n"); printk 13612 drivers/scsi/lpfc/lpfc_init.c printk(KERN_ERR "Could not register lpfcmgmt device, " printk 1512 drivers/scsi/lpfc/lpfc_sli.c printk("%s - Unhandled SLI-3 Command x%x\n", printk 3792 drivers/scsi/lpfc/lpfc_sli.c printk(KERN_ERR "%s: out of buffers! Failing " printk 10462 drivers/scsi/lpfc/lpfc_sli.c printk(KERN_ERR "%d:0462 Too many cmd / rsp ring entries in " printk 11368 drivers/scsi/lpfc/lpfc_sli.c printk(KERN_ERR "%s: Unknown context cmd type, value %d\n", printk 77 drivers/scsi/mac53c94.c printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); printk 79 drivers/scsi/mac53c94.c printk(KERN_CONT " %.2x", cmd->cmnd[i]); printk 80 drivers/scsi/mac53c94.c printk(KERN_CONT "\n"); printk 81 drivers/scsi/mac53c94.c printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", printk 212 drivers/scsi/mac53c94.c printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n", printk 218 drivers/scsi/mac53c94.c printk(KERN_INFO "external SCSI bus reset detected\n"); printk 225 drivers/scsi/mac53c94.c printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n", printk 233 drivers/scsi/mac53c94.c printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n", printk 240 drivers/scsi/mac53c94.c printk(KERN_DEBUG "53c94: interrupt with no command active?\n"); printk 244 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53c94: parity error\n"); printk 256 drivers/scsi/mac53c94.c printk(KERN_DEBUG "got intr %x during selection\n", intr); printk 261 drivers/scsi/mac53c94.c printk(KERN_DEBUG "seq step %x after command\n", seq); printk 286 drivers/scsi/mac53c94.c printk(KERN_DEBUG "in unexpected phase %x after cmd\n", printk 295 drivers/scsi/mac53c94.c printk(KERN_DEBUG "got intr %x before status\n", intr); printk 313 drivers/scsi/mac53c94.c printk(KERN_DEBUG "intr %x before data xfer complete\n", intr); printk 323 drivers/scsi/mac53c94.c printk(KERN_DEBUG "got intr %x on completion\n", intr); printk 335 drivers/scsi/mac53c94.c printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr); printk 341 drivers/scsi/mac53c94.c printk(KERN_DEBUG "don't know about phase %d\n", state->phase); printk 421 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53c94: expected 2 addrs and intrs" printk 428 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53c94: unable to request memory resources"); printk 434 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53c94: couldn't register host"); printk 452 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53c94: ioremap failed for %pOF\n", node); printk 458 drivers/scsi/mac53c94.c printk(KERN_ERR "%pOF: can't get clock frequency, " printk 472 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53c94: couldn't allocate dma " printk 485 drivers/scsi/mac53c94.c printk(KERN_ERR "mac53C94: can't get irq %d for %pOF\n", printk 107 drivers/scsi/mac_esp.c printk(KERN_ERR PFX "FIFO is not empty (sreg %02x)\n", printk 133 drivers/scsi/mac_esp.c printk(KERN_ERR PFX "PDMA timeout (sreg %02x)\n", printk 363 drivers/scsi/mac_esp.c printk(KERN_INFO PFX "using PIO for controller %d\n", dev->id); printk 369 drivers/scsi/mac_esp.c printk(KERN_INFO PFX "using PDMA for controller %d\n", dev->id); printk 4619 drivers/scsi/megaraid.c printk(KERN_WARNING printk 4639 drivers/scsi/megaraid.c printk(KERN_WARNING printk 258 drivers/scsi/megaraid/mega_common.h #define ASSERT_ACTION printk printk 39 drivers/scsi/megaraid/megaraid_ioctl.h #define con_log(level, fmt) if (LSI_DBGLVL >= level) printk fmt; printk 417 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_WARNING "megaraid_sas: provided event log level is out of range, setting it to default 2(CLASS_CRITICAL), permissible range is: -2 to 4\n"); printk 2901 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_CONT "\n"); printk 2902 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_CONT "%08x: ", (i * 4)); printk 2904 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_CONT "%08x ", le32_to_cpu(buf_loc[i])); printk 2906 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_CONT "\n"); printk 2924 drivers/scsi/megaraid/megaraid_sas_base.c printk("%08x: %08x\n", (i * 4), readl(®[i])); printk 2956 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_INFO "IO request frame:\n"); printk 2959 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_INFO "Chain frame:\n"); printk 7954 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc); printk 8320 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_DEBUG "megasas: fasync_helper was not " printk 8428 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n"); printk 8518 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_ERR "megasas: could not set dbg_lvl\n"); printk 8694 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_ERR "invalid instance!\n"); printk 8820 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_DEBUG "megasas: failed to open device node\n"); printk 8834 drivers/scsi/megaraid/megaraid_sas_base.c printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n"); printk 76 drivers/scsi/megaraid/megaraid_sas_fp.c printk(KERN_ERR "megasas : DIVISOR is zero, in div fn\n"); printk 94 drivers/scsi/megaraid/megaraid_sas_fp.c printk(KERN_ERR "megasas : DIVISOR is zero in mod fn\n"); printk 252 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh log %d: bs=%.2x%.2x ph=%.2x ", printk 255 drivers/scsi/mesh.c printk("tb=%10u ", lp->tb); printk 257 drivers/scsi/mesh.c printk(lp->fmt, lp->d); printk 258 drivers/scsi/mesh.c printk("\n"); printk 277 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh log: bs=%.2x%.2x ph=%.2x t%d ", printk 280 drivers/scsi/mesh.c printk("tb=%10u ", lp->tb); printk 282 drivers/scsi/mesh.c printk(lp->fmt, lp->d); printk 283 drivers/scsi/mesh.c printk("\n"); printk 310 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: state at %p, regs at %p, dma at %p\n", printk 312 drivers/scsi/mesh.c printk(KERN_DEBUG " ct=%4x seq=%2x bs=%4x fc=%2x " printk 319 drivers/scsi/mesh.c printk(KERN_DEBUG " fifo data=%.2x\n",in_8(&mr->fifo)); printk 320 drivers/scsi/mesh.c printk(KERN_DEBUG " dma stat=%x cmdptr=%x\n", printk 322 drivers/scsi/mesh.c printk(KERN_DEBUG " phase=%d msgphase=%d conn_tgt=%d data_ptr=%d\n", printk 324 drivers/scsi/mesh.c printk(KERN_DEBUG " dma_st=%d dma_ct=%d n_msgout=%d\n", printk 330 drivers/scsi/mesh.c printk(KERN_DEBUG " target %d: req=%p goes_out=%d saved_ptr=%d\n", printk 379 drivers/scsi/mesh.c printk(KERN_INFO "mesh: performing initial bus reset...\n"); printk 418 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh_start: %p tgt=%d cmd=", cmd, id); printk 420 drivers/scsi/mesh.c printk(" %x", cmd->cmnd[i]); printk 421 drivers/scsi/mesh.c printk(" use_sg=%d buffer=%p bufflen=%u\n", printk 541 drivers/scsi/mesh.c printk(KERN_ERR "mesh: controller not responding" printk 563 drivers/scsi/mesh.c printk(KERN_ERR "inappropriate mesh_start (phase=%d, ms=%p)", printk 602 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh_done: result = %x, data_ptr=%d, buflen=%d\n", printk 609 drivers/scsi/mesh.c printk(KERN_DEBUG "buffer = %x %x %x %x %x %x %x %x\n", printk 648 drivers/scsi/mesh.c printk(KERN_INFO "mesh: target %d now asynchronous\n", printk 675 drivers/scsi/mesh.c printk(KERN_INFO "mesh: target %d synchronous at %d.%d MB/s\n", printk 709 drivers/scsi/mesh.c printk(KERN_ERR "mesh: msg_out but n_msgout=%d\n", printk 716 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: sending %d msg bytes:", printk 719 drivers/scsi/mesh.c printk(" %x", ms->msgout[i]); printk 720 drivers/scsi/mesh.c printk("\n"); printk 759 drivers/scsi/mesh.c printk(KERN_ERR "mesh bug: start_phase msgphase=%d\n", printk 817 drivers/scsi/mesh.c printk(KERN_ERR "mesh: start_phase called with phase=%d\n", printk 884 drivers/scsi/mesh.c printk(KERN_ERR "mesh: reselected in phase %d/%d tgt %d\n", printk 891 drivers/scsi/mesh.c printk(KERN_ERR "mesh: reselected with DMA started !\n"); printk 928 drivers/scsi/mesh.c printk(KERN_ERR "mesh: reselection but nothing in fifo?\n"); printk 941 drivers/scsi/mesh.c printk(KERN_ERR "mesh: bad reselection data %x\n", b); printk 954 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: reselected by target %d\n", t); printk 955 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: saved_ptr=%x goes_out=%d cmd=%p\n", printk 960 drivers/scsi/mesh.c printk(KERN_ERR "mesh: reselected by tgt %d but no cmd!\n", t); printk 1043 drivers/scsi/mesh.c printk(KERN_INFO "mesh: SCSI bus reset detected: " printk 1047 drivers/scsi/mesh.c printk("done\n"); printk 1059 drivers/scsi/mesh.c printk(KERN_WARNING "mesh: target %d aborted\n", printk 1071 drivers/scsi/mesh.c printk(KERN_ERR "mesh: msg parity error, target %d\n", printk 1080 drivers/scsi/mesh.c printk(KERN_ERR "mesh: parity error, target %d\n", printk 1108 drivers/scsi/mesh.c printk(KERN_ERR "mesh: sequence error (err=%x exc=%x)\n", printk 1111 drivers/scsi/mesh.c printk(KERN_ERR "mesh: unknown error %x (exc=%x)\n", err, exc); printk 1137 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: lost arbitration\n"); printk 1149 drivers/scsi/mesh.c printk(KERN_ERR "mesh: can't cope with exception %x\n", exc); printk 1167 drivers/scsi/mesh.c printk(KERN_DEBUG "got %d message bytes:", ms->n_msgin); printk 1169 drivers/scsi/mesh.c printk(" %x", ms->msgin[i]); printk 1170 drivers/scsi/mesh.c printk("\n"); printk 1233 drivers/scsi/mesh.c printk(KERN_WARNING "mesh: lun mismatch " printk 1245 drivers/scsi/mesh.c printk(KERN_WARNING "mesh: rejecting message from target %d:", printk 1248 drivers/scsi/mesh.c printk(" %x", ms->msgin[i]); printk 1249 drivers/scsi/mesh.c printk("\n"); printk 1346 drivers/scsi/mesh.c printk(KERN_ERR "mesh: halt_dma: data_ptr=%d (nb=%d, ms=%p)\n", printk 1355 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: target %d overrun, " printk 1424 drivers/scsi/mesh.c printk(KERN_DEBUG printk 1434 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: unknown scsi phase %x\n", phase); printk 1506 drivers/scsi/mesh.c printk(KERN_ERR "mesh: error %x in msg_out\n", printk 1512 drivers/scsi/mesh.c printk(KERN_ERR "mesh: exc %x in msg_out\n", printk 1515 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: bs0=%x in msg_out\n", printk 1542 drivers/scsi/mesh.c printk(KERN_ERR "mesh: interrupt in idle phase?\n"); printk 1602 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh: status is %x\n", printk 1664 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh_intr, bs0=%x int=%x exc=%x err=%x " printk 1691 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh_abort(%p)\n", cmd); printk 1711 drivers/scsi/mesh.c printk(KERN_DEBUG "mesh_host_reset\n"); printk 1818 drivers/scsi/mesh.c printk(KERN_INFO "resetting MESH scsi bus(es)\n"); printk 1867 drivers/scsi/mesh.c printk(KERN_ERR "mesh: expected 2 addrs and 2 intrs" printk 1874 drivers/scsi/mesh.c printk(KERN_ERR "mesh: unable to request memory resources"); printk 1879 drivers/scsi/mesh.c printk(KERN_ERR "mesh: couldn't register host"); printk 1898 drivers/scsi/mesh.c printk(KERN_ERR "mesh: can't map registers\n"); printk 1903 drivers/scsi/mesh.c printk(KERN_ERR "mesh: can't map registers\n"); printk 1923 drivers/scsi/mesh.c printk(KERN_ERR "mesh: can't allocate DMA table\n"); printk 1941 drivers/scsi/mesh.c printk(KERN_INFO "mesh: assuming 50MHz clock frequency\n"); printk 1960 drivers/scsi/mesh.c printk(KERN_ERR "MESH: can't get irq %d\n", ms->meshintr); printk 2061 drivers/scsi/mesh.c printk(KERN_INFO "mesh: configured for synchronous %d MB/s\n", sync_rate); printk 2065 drivers/scsi/mesh.c printk(KERN_INFO "mesh: configured for asynchronous\n"); printk 47 drivers/scsi/mvme16x_scsi.c printk(KERN_INFO "mvme16x-scsi: detection disabled, " printk 54 drivers/scsi/mvme16x_scsi.c printk(KERN_ERR "mvme16x-scsi: " printk 71 drivers/scsi/mvme16x_scsi.c printk(KERN_ERR "mvme16x-scsi: No host detected; " printk 79 drivers/scsi/mvme16x_scsi.c printk(KERN_ERR "mvme16x-scsi: request_irq failed\n"); printk 131 drivers/scsi/mvsas/mv_64xx.c printk(KERN_DEBUG "check SRS 0 %08X.\n", tmp); printk 137 drivers/scsi/mvsas/mv_64xx.c printk(KERN_DEBUG "register set 0x%x was stopped.\n", printk 283 drivers/scsi/mvsas/mv_init.c printk(KERN_DEBUG "failed to create dma pool %s.\n", pool_name); printk 38 drivers/scsi/mvsas/mv_sas.h printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg) printk 41 drivers/scsi/mvsas/mv_sas.h printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg) printk 1362 drivers/scsi/mvumi.c printk(KERN_WARNING "Event param(len 0x%x): ", printk 1365 drivers/scsi/mvumi.c printk(KERN_WARNING "0x%x ", ptr->params[i]); printk 1367 drivers/scsi/mvumi.c printk(KERN_WARNING "\n"); printk 1371 drivers/scsi/mvumi.c printk(KERN_WARNING "Event sense data(len 0x%x): ", printk 1374 drivers/scsi/mvumi.c printk(KERN_WARNING "0x%x ", ptr->sense_data[i]); printk 1375 drivers/scsi/mvumi.c printk(KERN_WARNING "\n"); printk 260 drivers/scsi/ncr53c8xx.c printk("___m_alloc(%d) = %p\n", size, (void *) a); printk 274 drivers/scsi/ncr53c8xx.c printk("___m_free(%p, %d)\n", ptr, size); printk 320 drivers/scsi/ncr53c8xx.c printk ("new %-10s[%4d] @%p.\n", name, size, p); printk 325 drivers/scsi/ncr53c8xx.c printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size); printk 335 drivers/scsi/ncr53c8xx.c printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr); printk 763 drivers/scsi/ncr53c8xx.c printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur); printk 3535 drivers/scsi/ncr53c8xx.c printk (KERN_ERR "%s: ERROR0 IN SCRIPT at %d.\n", printk 3541 drivers/scsi/ncr53c8xx.c printk (KERN_DEBUG "%p: <%x>\n", printk 3565 drivers/scsi/ncr53c8xx.c printk (KERN_ERR"%s: ERROR1 IN SCRIPT at %d.\n", printk 3672 drivers/scsi/ncr53c8xx.c printk("\n"); printk 3977 drivers/scsi/ncr53c8xx.c printk(KERN_INFO "%s: ID %d, Fast-%d%s%s\n", ncr_name(np), printk 3984 drivers/scsi/ncr53c8xx.c printk (KERN_INFO "%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " printk 3989 drivers/scsi/ncr53c8xx.c printk (KERN_INFO "%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " printk 3996 drivers/scsi/ncr53c8xx.c printk (KERN_INFO "%s: on-chip RAM at 0x%lx\n", printk 4460 drivers/scsi/ncr53c8xx.c printk ("%s: queuepos=%d.\n", ncr_name (np), np->squeueput); printk 4479 drivers/scsi/ncr53c8xx.c printk("%s: resetting, " printk 4515 drivers/scsi/ncr53c8xx.c printk("%s: suspicious SCSI data while resetting the BUS.\n", printk 4517 drivers/scsi/ncr53c8xx.c printk("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = " printk 4668 drivers/scsi/ncr53c8xx.c printk ("%s: abort ccb=%p (cancel)\n", ncr_name (np), cp); printk 4707 drivers/scsi/ncr53c8xx.c printk("%s: releasing host resources\n", ncr_name(np)); printk 4715 drivers/scsi/ncr53c8xx.c printk("%s: stopping the timer\n", ncr_name(np)); printk 4721 drivers/scsi/ncr53c8xx.c printk("%s: the timer seems to be already stopped\n", ncr_name(np)); printk 4729 drivers/scsi/ncr53c8xx.c printk("%s: disabling chip interrupts\n", ncr_name(np)); printk 4739 drivers/scsi/ncr53c8xx.c printk("%s: resetting chip\n", ncr_name(np)); printk 4760 drivers/scsi/ncr53c8xx.c printk("%s: shall free an active ccb (host_status=%d)\n", printk 4764 drivers/scsi/ncr53c8xx.c printk("%s: freeing ccb (%lx)\n", ncr_name(np), (u_long) cp); printk 4777 drivers/scsi/ncr53c8xx.c printk("%s: freeing lp (%lx)\n", ncr_name(np), (u_long) lp); printk 4794 drivers/scsi/ncr53c8xx.c printk("%s: host resources successfully released\n", inst_name); printk 4825 drivers/scsi/ncr53c8xx.c printk ("CCB=%lx STAT=%x/%x\n", (unsigned long)cp, printk 4964 drivers/scsi/ncr53c8xx.c for (i=0; i<14; i++) printk (" %x", *p++); printk 4965 drivers/scsi/ncr53c8xx.c printk (".\n"); printk 5025 drivers/scsi/ncr53c8xx.c for (i=0; i<cmd->cmd_len; i++) printk (" %x", *p++); printk 5030 drivers/scsi/ncr53c8xx.c printk (" GOOD"); printk 5033 drivers/scsi/ncr53c8xx.c printk (" SENSE:"); printk 5036 drivers/scsi/ncr53c8xx.c printk (" %x", *p++); printk 5039 drivers/scsi/ncr53c8xx.c printk (" STAT: %x\n", cp->scsi_status); printk 5042 drivers/scsi/ncr53c8xx.c } else printk (" HOSTERROR: %x", cp->host_status); printk 5043 drivers/scsi/ncr53c8xx.c printk ("\n"); printk 5217 drivers/scsi/ncr53c8xx.c if (msg) printk (KERN_INFO "%s: restart (%s).\n", ncr_name (np), msg); printk 5342 drivers/scsi/ncr53c8xx.c printk ("%s: Downloading SCSI SCRIPTS.\n", printk 5751 drivers/scsi/ncr53c8xx.c printk("%s: command processing resumed\n", ncr_name(np)); printk 5777 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("{"); printk 5779 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("}"); printk 5844 drivers/scsi/ncr53c8xx.c printk ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", printk 5852 drivers/scsi/ncr53c8xx.c printk ("%s: script cmd = %08x\n", ncr_name(np), printk 5856 drivers/scsi/ncr53c8xx.c printk ("%s: regdump:", ncr_name(np)); printk 5858 drivers/scsi/ncr53c8xx.c printk (" %02x", (unsigned)INB_OFF(i)); printk 5859 drivers/scsi/ncr53c8xx.c printk (".\n"); printk 5911 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("F "); printk 5930 drivers/scsi/ncr53c8xx.c printk ("<%d|%x:%x|%x:%x>", printk 5967 drivers/scsi/ncr53c8xx.c printk( "%s: unknown interrupt(s) ignored, " printk 6030 drivers/scsi/ncr53c8xx.c printk ("%s: have to clear fifos.\n", ncr_name (np)); printk 6041 drivers/scsi/ncr53c8xx.c printk ("%s: handshake timeout\n", ncr_name(np)); printk 6047 drivers/scsi/ncr53c8xx.c printk ("%s: unexpected disconnect\n", ncr_name(np)); printk 6058 drivers/scsi/ncr53c8xx.c printk ("%s: unknown interrupt\n", ncr_name(np)); printk 6081 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("T"); printk 6127 drivers/scsi/ncr53c8xx.c printk("%s: SCSI bus mode change from %x to %x.\n", printk 6163 drivers/scsi/ncr53c8xx.c printk("%s: SCSI parity error detected: SCR1=%d DBC=%x SSTAT1=%x\n", printk 6289 drivers/scsi/ncr53c8xx.c printk ("P%x%x RL=%d D=%d SS0=%x ", cmd&7, sbcl&7, printk 6294 drivers/scsi/ncr53c8xx.c printk ("P%x%x RL=%d ", cmd&7, sbcl&7, rest); printk 6351 drivers/scsi/ncr53c8xx.c printk ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", printk 6364 drivers/scsi/ncr53c8xx.c printk ("%s: SCSI phase error fixup: " printk 6386 drivers/scsi/ncr53c8xx.c printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n", printk 6411 drivers/scsi/ncr53c8xx.c printk ("%s: SCSI phase error fixup: " printk 6694 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("I#%d", num); printk 6725 drivers/scsi/ncr53c8xx.c printk ("%s:%d: SIR %d, " printk 6730 drivers/scsi/ncr53c8xx.c printk ("%s:%d: SIR %d, " printk 7698 drivers/scsi/ncr53c8xx.c printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", printk 7752 drivers/scsi/ncr53c8xx.c printk ("CACHE TEST FAILED: timeout.\n"); printk 7759 drivers/scsi/ncr53c8xx.c printk ("CACHE TEST FAILED: script execution failed.\n"); printk 7760 drivers/scsi/ncr53c8xx.c printk ("start=%08lx, pc=%08lx, end=%08lx\n", printk 7769 drivers/scsi/ncr53c8xx.c printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n", printk 7774 drivers/scsi/ncr53c8xx.c printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n", printk 7779 drivers/scsi/ncr53c8xx.c printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n", printk 7820 drivers/scsi/ncr53c8xx.c printk ("%s: enabling clock multiplier\n", ncr_name(np)); printk 7828 drivers/scsi/ncr53c8xx.c printk("%s: the chip cannot lock the frequency\n", ncr_name(np)); printk 7882 drivers/scsi/ncr53c8xx.c printk ("%s: Delay (GEN=%d): %u msec\n", ncr_name(np), gen, ms); printk 7906 drivers/scsi/ncr53c8xx.c printk ("%s: clock multiplier found\n", ncr_name(np)); printk 7925 drivers/scsi/ncr53c8xx.c printk ("%s: NCR clock is %uKHz, %uKHz\n", ncr_name(np), f1, f2); printk 7935 drivers/scsi/ncr53c8xx.c printk ("%s: clock multiplier assumed\n", ncr_name(np)); printk 8010 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n", printk 8027 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx_queue_command\n"); printk 8040 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx : command not queued - result=%d\n", sts); printk 8045 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx : command successfully queued\n"); printk 8070 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx : interrupt received\n"); printk 8073 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("["); printk 8081 drivers/scsi/ncr53c8xx.c if (DEBUG_FLAGS & DEBUG_TINY) printk ("]\n"); printk 8138 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx_abort\n"); printk 8175 drivers/scsi/ncr53c8xx.c printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_long) cmd); printk 8197 drivers/scsi/ncr53c8xx.c printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd); printk 8214 drivers/scsi/ncr53c8xx.c if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts); printk 8221 drivers/scsi/ncr53c8xx.c printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_long) wcmd); printk 8227 drivers/scsi/ncr53c8xx.c printk("%s: cmd %lx done forced sts=%d\n", ncr_name(np), (u_long) wcmd, sts); printk 8312 drivers/scsi/ncr53c8xx.c printk(KERN_INFO "ncr53c720-%d: rev 0x%x irq %d\n", printk 8364 drivers/scsi/ncr53c8xx.c printk(KERN_ERR printk 8369 drivers/scsi/ncr53c8xx.c printk(KERN_INFO printk 8384 drivers/scsi/ncr53c8xx.c printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n", printk 8444 drivers/scsi/ncr53c8xx.c printk(KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n"); printk 8462 drivers/scsi/ncr53c8xx.c printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np)); printk 8476 drivers/scsi/ncr53c8xx.c printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n", printk 8497 drivers/scsi/ncr53c8xx.c printk(KERN_INFO "%s: detaching...\n", ncr_name(np)); printk 8520 drivers/scsi/ncr53c8xx.c printk("ncr53c8xx: release\n"); printk 322 drivers/scsi/nsp32.c printk("%snsp32: %s\n", type, buf); printk 324 drivers/scsi/nsp32.c printk("%snsp32: %s (%d): %s\n", type, func, line, buf); printk 339 drivers/scsi/nsp32.c printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf); printk 1258 drivers/scsi/nsp32.c printk( "auto+fifo\n"); printk 69 drivers/scsi/nsp32_debug.c printk("%s[%02x] ", reserved, opcode); printk 72 drivers/scsi/nsp32_debug.c printk("%s(notext)[%02x] ", unknown, opcode); printk 75 drivers/scsi/nsp32_debug.c printk("%s[%02x] ", vendor, opcode); printk 79 drivers/scsi/nsp32_debug.c printk("%s[%02x] ", table[opcode & 0x1f], opcode); printk 81 drivers/scsi/nsp32_debug.c printk("%s[%02x] ", unknown, opcode); printk 100 drivers/scsi/nsp32_debug.c printk("%02x ", command[i]); printk 105 drivers/scsi/nsp32_debug.c printk("LBA=%d len=%d", printk 113 drivers/scsi/nsp32_debug.c printk("LBA=%d len=%d", printk 123 drivers/scsi/nsp32_debug.c printk("LBA=%d len=%d", printk 137 drivers/scsi/nsp32_debug.c printk("\n"); printk 149 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_COMMAND\n"); printk 152 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_MESSAGE_IN\n"); printk 155 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_MESSAGE_OUT\n"); printk 158 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_DATA_IN\n"); printk 161 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_DATA_OUT\n"); printk 164 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_STATUS\n"); printk 167 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_SELECT\n"); printk 170 drivers/scsi/nsp32_debug.c printk( "BUSPHASE_other: 0x%x\n", stat); printk 177 drivers/scsi/nsp32_debug.c printk("auto: 0x%x,", i); printk 180 drivers/scsi/nsp32_debug.c printk(" cmd"); printk 183 drivers/scsi/nsp32_debug.c printk(" din"); printk 186 drivers/scsi/nsp32_debug.c printk(" dout"); printk 189 drivers/scsi/nsp32_debug.c printk(" mout"); printk 192 drivers/scsi/nsp32_debug.c printk(" stat"); printk 195 drivers/scsi/nsp32_debug.c printk(" ill"); printk 198 drivers/scsi/nsp32_debug.c printk(" bfree-o"); printk 201 drivers/scsi/nsp32_debug.c printk(" min-o"); printk 204 drivers/scsi/nsp32_debug.c printk(" mout-o"); printk 207 drivers/scsi/nsp32_debug.c printk(" sel"); printk 210 drivers/scsi/nsp32_debug.c printk(" m0"); printk 213 drivers/scsi/nsp32_debug.c printk(" m2"); printk 216 drivers/scsi/nsp32_debug.c printk(" m3"); printk 219 drivers/scsi/nsp32_debug.c printk(" m4"); printk 222 drivers/scsi/nsp32_debug.c printk(" busy"); printk 225 drivers/scsi/nsp32_debug.c printk("\n"); printk 233 drivers/scsi/nsp32_debug.c printk("Phase=0x%x, ", nsp32_read1(base, SCSI_BUS_MONITOR)); printk 234 drivers/scsi/nsp32_debug.c printk("OldPhase=0x%x, ", nsp32_index_read1(base, OLD_SCSI_PHASE)); printk 235 drivers/scsi/nsp32_debug.c printk("syncreg=0x%x, ", nsp32_read1(base, SYNC_REG)); printk 236 drivers/scsi/nsp32_debug.c printk("ackwidth=0x%x, ", nsp32_read1(base, ACK_WIDTH)); printk 237 drivers/scsi/nsp32_debug.c printk("sgtpaddr=0x%lx, ", nsp32_read4(base, SGT_ADR)); printk 238 drivers/scsi/nsp32_debug.c printk("scsioutlatch=0x%x, ", nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID)); printk 239 drivers/scsi/nsp32_debug.c printk("msgout=0x%lx, ", nsp32_read4(base, SCSI_MSG_OUT)); printk 240 drivers/scsi/nsp32_debug.c printk("miscrd=0x%x, ", nsp32_index_read2(base, MISC_WR)); printk 241 drivers/scsi/nsp32_debug.c printk("seltimeout=0x%x, ", nsp32_read2(base, SEL_TIME_OUT)); printk 242 drivers/scsi/nsp32_debug.c printk("sreqrate=0x%x, ", nsp32_read1(base, SREQ_SMPL_RATE)); printk 243 drivers/scsi/nsp32_debug.c printk("transStatus=0x%x, ", nsp32_read2(base, TRANSFER_STATUS)); printk 244 drivers/scsi/nsp32_debug.c printk("reselectid=0x%x, ", nsp32_read2(base, COMMAND_CONTROL)); printk 245 drivers/scsi/nsp32_debug.c printk("arbit=0x%x, ", nsp32_read1(base, ARBIT_STATUS)); printk 246 drivers/scsi/nsp32_debug.c printk("BmStart=0x%lx, ", nsp32_read4(base, BM_START_ADR)); printk 247 drivers/scsi/nsp32_debug.c printk("BmCount=0x%lx, ", nsp32_read4(base, BM_CNT)); printk 248 drivers/scsi/nsp32_debug.c printk("SackCnt=0x%lx, ", nsp32_read4(base, SACK_CNT)); printk 249 drivers/scsi/nsp32_debug.c printk("SReqCnt=0x%lx, ", nsp32_read4(base, SREQ_CNT)); printk 250 drivers/scsi/nsp32_debug.c printk("SavedSackCnt=0x%lx, ", nsp32_read4(base, SAVED_SACK_CNT)); printk 251 drivers/scsi/nsp32_debug.c printk("ScsiBusControl=0x%x, ", nsp32_read1(base, SCSI_BUS_CONTROL)); printk 252 drivers/scsi/nsp32_debug.c printk("FifoRestCnt=0x%x, ", nsp32_read2(base, FIFO_REST_CNT)); printk 253 drivers/scsi/nsp32_debug.c printk("CdbIn=0x%x, ", nsp32_read1(base, SCSI_CSB_IN)); printk 254 drivers/scsi/nsp32_debug.c printk("\n"); printk 257 drivers/scsi/nsp32_debug.c printk("execph=0x%x, ", nsp32_read2(base, SCSI_EXECUTE_PHASE)); printk 258 drivers/scsi/nsp32_debug.c printk("IrqStatus=0x%x, ", nsp32_read2(base, IRQ_STATUS)); printk 259 drivers/scsi/nsp32_debug.c printk("\n"); printk 175 drivers/scsi/pcmcia/aha152x_stub.c printk(KERN_INFO "aha152x_cs: no SCSI devices found\n"); printk 149 drivers/scsi/pcmcia/nsp_cs.c printk("%snsp_cs: %s\n", type, buf); printk 151 drivers/scsi/pcmcia/nsp_cs.c printk("%snsp_cs: %s (%d): %s\n", type, func, line, buf); printk 166 drivers/scsi/pcmcia/nsp_cs.c printk("nsp_cs-debug: 0x%x %s (%d): %s\n", mask, func, line, buf); printk 71 drivers/scsi/pcmcia/nsp_debug.c printk("%s[%02x] ", reserved, opcode); printk 74 drivers/scsi/pcmcia/nsp_debug.c printk("%s(notext)[%02x] ", unknown, opcode); printk 77 drivers/scsi/pcmcia/nsp_debug.c printk("%s[%02x] ", vendor, opcode); printk 81 drivers/scsi/pcmcia/nsp_debug.c printk("%s[%02x] ", table[opcode & 0x1f], opcode); printk 83 drivers/scsi/pcmcia/nsp_debug.c printk("%s[%02x] ", unknown, opcode); printk 91 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG); printk 101 drivers/scsi/pcmcia/nsp_debug.c printk("%02x ", command[i]); printk 106 drivers/scsi/pcmcia/nsp_debug.c printk("LBA=%d len=%d", printk 114 drivers/scsi/pcmcia/nsp_debug.c printk("LBA=%d len=%d", printk 124 drivers/scsi/pcmcia/nsp_debug.c printk("LBA=%d len=%d", printk 138 drivers/scsi/pcmcia/nsp_debug.c printk("\n"); printk 165 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "scsi phase: unknown(%d)\n", i); printk 169 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "scsi phase: %s\n", ph[i]); printk 178 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_COMMAND\n"); printk 181 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_MESSAGE_IN\n"); printk 184 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_MESSAGE_OUT\n"); printk 187 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_DATA_IN\n"); printk 190 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_DATA_OUT\n"); printk 193 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_STATUS\n"); printk 196 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_SELECT\n"); printk 199 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "BUSPHASE_other\n"); printk 208 drivers/scsi/pcmcia/nsp_debug.c printk(KERN_DEBUG "msg:"); printk 210 drivers/scsi/pcmcia/nsp_debug.c printk(" %02x", data->MsgBuffer[i]); printk 212 drivers/scsi/pcmcia/nsp_debug.c printk("\n"); printk 223 drivers/scsi/pcmcia/qlogic_stub.c printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name); printk 358 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SYM53C500_intr called\n")); printk 369 drivers/scsi/pcmcia/sym53c500_cs.c printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", printk 371 drivers/scsi/pcmcia/sym53c500_cs.c printk(", pio=%02x\n", pio_status); printk 375 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: reset intr received\n")); printk 381 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: Warning: PIO error!\n"); printk 387 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: Warning: parity error!\n"); printk 393 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: Warning: gross error!\n"); printk 399 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: disconnect intr received\n")); printk 416 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SYM53C500: Data-Out phase\n")); printk 435 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SYM53C500: Data-In phase\n")); printk 450 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: Warning: Unknown interrupt occurred in command phase!\n"); printk 455 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SYM53C500: Status phase\n")); printk 462 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: WARNING: Reserved phase!!!\n"); printk 466 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: Message-Out phase\n")); printk 473 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SYM53C500: Message-In phase\n")); printk 479 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SCSI FIFO size=%d\n", inb(port_base + FIFO_FLAGS) & 0x1f)); printk 480 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("Status = %02x Message = %02x\n", curSC->SCp.Status, curSC->SCp.Message)); printk 484 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("Discarding SAVE_POINTERS message\n")); printk 533 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500_info called\n")); printk 548 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("SYM53C500_queue called\n")); printk 550 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", printk 555 drivers/scsi/pcmcia/sym53c500_cs.c printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i])); printk 556 drivers/scsi/pcmcia/sym53c500_cs.c VDEB(printk("\n")); printk 584 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500_host_reset called\n")); printk 599 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500_biosparm called\n")); printk 741 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n", printk 748 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: Unable to register host, giving up.\n"); printk 756 drivers/scsi/pcmcia/sym53c500_cs.c printk("SYM53C500: unable to allocate IRQ %d\n", irq_level); printk 759 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: allocated IRQ %d\n", irq_level)); printk 761 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: No interrupts detected\n")); printk 764 drivers/scsi/pcmcia/sym53c500_cs.c DEB(printk("SYM53C500: Shouldn't get here!\n")); printk 795 drivers/scsi/pcmcia/sym53c500_cs.c printk(KERN_INFO "sym53c500_cs: no SCSI devices found\n"); printk 1161 drivers/scsi/pm8001/pm8001_sas.c printk(KERN_INFO "%02x ", cmnd->cmnd[i]); printk 1162 drivers/scsi/pm8001/pm8001_sas.c printk(KERN_INFO "]\n"); printk 69 drivers/scsi/pm8001/pm8001_sas.h #define pm8001_printk(format, arg...) printk(KERN_INFO "pm80xx %s %d:" \ printk 4229 drivers/scsi/pmcraid.c printk(KERN_INFO "%s(): NULL host pointer\n", __func__); printk 984 drivers/scsi/pmcraid.h printk(KERN_ERR "MaxRAID: "__VA_ARGS__) printk 988 drivers/scsi/pmcraid.h printk(KERN_INFO "MaxRAID: "__VA_ARGS__) printk 135 drivers/scsi/ppa.c printk(KERN_INFO "ppa: recon_tmo set to %ld\n", x); printk 138 drivers/scsi/ppa.c printk(KERN_WARNING "ppa /proc: invalid variable\n"); printk 158 drivers/scsi/ppa.c #define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\ printk 204 drivers/scsi/ppa.c printk(KERN_WARNING "ppa timeout in ppa_wait\n"); printk 236 drivers/scsi/ppa.c printk(KERN_WARNING "ppa: ECP sync failed as data still present in FIFO.\n"); printk 316 drivers/scsi/ppa.c printk(KERN_ERR "PPA: bug in ppa_out()\n"); printk 369 drivers/scsi/ppa.c printk(KERN_ERR "PPA: bug in ppa_ins()\n"); printk 619 drivers/scsi/ppa.c printk(KERN_ERR "PPA: bug in ppa_interrupt\n"); printk 632 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: no device at SCSI ID %i\n", cmd->device->target); printk 635 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: BUS BUSY - EPP timeout detected\n"); printk 638 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: unknown timeout\n"); printk 641 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: told to abort\n"); printk 644 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: parity error (???)\n"); printk 647 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: internal driver error\n"); printk 650 drivers/scsi/ppa.c printk(KERN_DEBUG "ppa: told to reset device\n"); printk 653 drivers/scsi/ppa.c printk(KERN_WARNING "ppa: bad interrupt (???)\n"); printk 656 drivers/scsi/ppa.c printk(KERN_WARNING "ppa: bad return code (%02x)\n", printk 710 drivers/scsi/ppa.c printk(KERN_ERR "ppa: Parallel port cable is unplugged.\n"); printk 785 drivers/scsi/ppa.c printk(KERN_ERR "ppa: Invalid scsi phase\n"); printk 796 drivers/scsi/ppa.c printk(KERN_ERR "PPA: bug in ppa_queuecommand\n"); printk 903 drivers/scsi/ppa.c printk(KERN_INFO "ppa: Found device at ID %i, Attempting to use %s\n", printk 952 drivers/scsi/ppa.c printk(KERN_INFO "ppa: Communication established with ID %i using %s\n", printk 1056 drivers/scsi/ppa.c printk(KERN_ERR "ppa%d: failed to claim parport because " printk 1157 drivers/scsi/ppa.c printk(KERN_INFO "ppa: Version %s\n", PPA_VERSION); printk 560 drivers/scsi/qla1280.c do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0) printk 590 drivers/scsi/qla1280.c printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no); printk 622 drivers/scsi/qla1280.c printk(KERN_WARNING "scsi(%ld): Unable to identify or " printk 740 drivers/scsi/qla1280.c printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, " printk 847 drivers/scsi/qla1280.c printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, " printk 869 drivers/scsi/qla1280.c printk(KERN_INFO printk 891 drivers/scsi/qla1280.c printk(KERN_INFO printk 903 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280(%ld:%d): Issued bus " printk 914 drivers/scsi/qla1280.c printk(KERN_INFO printk 917 drivers/scsi/qla1280.c printk(KERN_INFO "scsi(%ld): I/O processing will " printk 942 drivers/scsi/qla1280.c printk(KERN_WARNING printk 1162 drivers/scsi/qla1280.c printk(KERN_WARNING "scsi(%ld:%i:%i): " printk 1366 drivers/scsi/qla1280.c printk(KERN_WARNING printk 1449 drivers/scsi/qla1280.c printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n", printk 1518 drivers/scsi/qla1280.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 1524 drivers/scsi/qla1280.c printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n", printk 1620 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: Wrong product ID = " printk 1652 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: Failed mbox check\n"); printk 1693 drivers/scsi/qla1280.c printk(KERN_ERR "scsi(%li): Failed to load firmware\n", printk 1765 drivers/scsi/qla1280.c printk(KERN_ERR "scsi(%li): Failed to load partial " printk 1782 drivers/scsi/qla1280.c printk(KERN_ERR printk 1789 drivers/scsi/qla1280.c printk(KERN_ERR "%s: FW compare error @ " printk 1792 drivers/scsi/qla1280.c printk(KERN_ERR "%s: FWbyte=%x " printk 1827 drivers/scsi/qla1280.c printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no); printk 1837 drivers/scsi/qla1280.c printk(KERN_ERR "scsi(%li): Failed to start firmware\n", printk 2428 drivers/scsi/qla1280.c printk(KERN_ERR "Warning mailbox wait already in use!\n"); printk 2468 drivers/scsi/qla1280.c printk(KERN_WARNING "qla1280_mailbox_command: Command failed, " printk 2472 drivers/scsi/qla1280.c printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n", printk 2475 drivers/scsi/qla1280.c printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n", printk 2551 drivers/scsi/qla1280.c printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n", printk 3417 drivers/scsi/qla1280.c printk(KERN_WARNING printk 3428 drivers/scsi/qla1280.c printk(KERN_DEBUG "qla1280_isr(): index %i " printk 3433 drivers/scsi/qla1280.c printk(KERN_WARNING printk 3440 drivers/scsi/qla1280.c printk(KERN_WARNING printk 3445 drivers/scsi/qla1280.c printk(KERN_WARNING printk 3459 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280_isr(): asynchronous " printk 3616 drivers/scsi/qla1280.c printk(KERN_WARNING "qla1280: Status Entry invalid handle\n"); printk 3740 drivers/scsi/qla1280.c printk(KERN_WARNING "!qla1280: Error Entry invalid handle"); printk 3778 drivers/scsi/qla1280.c printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n", printk 3813 drivers/scsi/qla1280.c printk(KERN_WARNING printk 3906 drivers/scsi/qla1280.c printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun); printk 3909 drivers/scsi/qla1280.c printk(" Sync: period %d, offset %d", printk 3912 drivers/scsi/qla1280.c printk(", Wide"); printk 3914 drivers/scsi/qla1280.c printk(", DT"); printk 3916 drivers/scsi/qla1280.c printk(" Async"); printk 3919 drivers/scsi/qla1280.c printk(", Tagged queuing: depth %d", device->queue_depth); printk 3920 drivers/scsi/qla1280.c printk("\n"); printk 3931 drivers/scsi/qla1280.c printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah " printk 3933 drivers/scsi/qla1280.c printk(KERN_DEBUG "---------------------------------------------" printk 3939 drivers/scsi/qla1280.c printk("0x%02x", c); printk 3942 drivers/scsi/qla1280.c printk("\n"); printk 3944 drivers/scsi/qla1280.c printk(" "); printk 3947 drivers/scsi/qla1280.c printk("\n"); printk 3966 drivers/scsi/qla1280.c printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd)); printk 3967 drivers/scsi/qla1280.c printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n", printk 3970 drivers/scsi/qla1280.c printk(" CDB = "); printk 3972 drivers/scsi/qla1280.c printk("0x%02x ", cmd->cmnd[i]); printk 3974 drivers/scsi/qla1280.c printk(" seg_cnt =%d\n", scsi_sg_count(cmd)); printk 3975 drivers/scsi/qla1280.c printk(" request buffer=0x%p, request buffer len=0x%x\n", printk 3983 drivers/scsi/qla1280.c printk(" tag=%d, transfersize=0x%x \n", printk 3985 drivers/scsi/qla1280.c printk(" SP=0x%p\n", CMD_SP(cmd)); printk 3986 drivers/scsi/qla1280.c printk(" underflow size = 0x%x, direction=0x%x\n", printk 4002 drivers/scsi/qla1280.c printk(KERN_DEBUG "Outstanding Commands on controller:\n"); printk 4093 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: unknown boot option %s\n", printk 4159 drivers/scsi/qla1280.c printk(KERN_INFO printk 4164 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n", printk 4168 drivers/scsi/qla1280.c printk(KERN_WARNING printk 4178 drivers/scsi/qla1280.c printk(KERN_WARNING printk 4192 drivers/scsi/qla1280.c printk(KERN_WARNING "scsi(%li): Unable to set a " printk 4202 drivers/scsi/qla1280.c printk(KERN_WARNING "scsi(%li): Unable to set a " printk 4213 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: Failed to get request memory\n"); printk 4221 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: Failed to get response memory\n"); printk 4242 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: Unable to map I/O memory\n"); printk 4251 drivers/scsi/qla1280.c printk(KERN_INFO "qla1280: Failed to reserve i/o region " printk 4267 drivers/scsi/qla1280.c printk("qla1280 : Failed to reserve interrupt %d already " printk 4274 drivers/scsi/qla1280.c printk(KERN_INFO "qla1x160: Failed to initialize adapter\n"); printk 4358 drivers/scsi/qla1280.c printk(KERN_WARNING printk 569 drivers/scsi/qla2xxx/qla_mbx.c printk(" mb[%u]=%x", i, mcp->mb[i]); printk 2127 drivers/scsi/qla2xxx/qla_nx.c printk(KERN_INFO printk 2190 drivers/scsi/qla2xxx/qla_nx.c printk(KERN_INFO printk 2224 drivers/scsi/qla2xxx/qla_nx.c printk(KERN_INFO printk 1207 drivers/scsi/qla2xxx/tcm_qla2xxx.c printk(KERN_ERR "Unable to insert s_id into fcport_map: %06x\n", printk 18 drivers/scsi/qla4xxx/ql4_dbg.c printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh " printk 20 drivers/scsi/qla4xxx/ql4_dbg.c printk("------------------------------------------------------------" printk 23 drivers/scsi/qla4xxx/ql4_dbg.c printk("%02x", *c); printk 25 drivers/scsi/qla4xxx/ql4_dbg.c printk("\n"); printk 28 drivers/scsi/qla4xxx/ql4_dbg.c printk(" "); printk 30 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "\n"); printk 39 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "mailbox[%d] = 0x%08X\n", printk 45 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X mailbox[%d] = 0x%08X\n", printk 50 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X flash_address = 0x%08X\n", printk 53 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X flash_data = 0x%08X\n", printk 56 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X ctrl_status = 0x%08X\n", printk 61 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X nvram = 0x%08X\n", printk 65 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X intr_mask = 0x%08X\n", printk 68 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X nvram = 0x%08X\n", printk 71 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X semaphore = 0x%08X\n", printk 75 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X req_q_in = 0x%08X\n", printk 78 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X rsp_q_out = 0x%08X\n", printk 83 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X ext_hw_conf = 0x%08X\n", printk 86 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X port_ctrl = 0x%08X\n", printk 89 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X port_status = 0x%08X\n", printk 92 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X req_q_out = 0x%08X\n", printk 95 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X gp_out = 0x%08X\n", printk 98 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X gp_in = 0x%08X\n", printk 101 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X port_err_status = 0x%08X\n", (uint8_t) printk 105 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "Page 0 Registers:\n"); printk 106 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X ext_hw_conf = 0x%08X\n", (uint8_t) printk 109 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X port_ctrl = 0x%08X\n", (uint8_t) printk 112 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X port_status = 0x%08X\n", (uint8_t) printk 115 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X gp_out = 0x%08X\n", printk 118 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X gp_in = 0x%08X\n", printk 121 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X port_err_status = 0x%08X\n", (uint8_t) printk 124 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "Page 1 Registers:\n"); printk 127 drivers/scsi/qla4xxx/ql4_dbg.c printk(KERN_INFO "0x%02X req_q_out = 0x%08X\n", printk 34 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Invalid function number, " printk 39 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__, printk 159 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", printk 168 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO " printk 236 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: " printk 244 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: " printk 257 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: LinkLocal Router & " printk 264 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Wait for additional " printk 267 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("IPv4 ")); printk 270 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("IPv6LinkLocal ")); printk 273 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("IPv6Addr0 ")); printk 276 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("IPv6Addr1 ")); printk 277 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("\"\n")); printk 417 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: unable to get firmware " printk 423 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: an unrecoverable error has" printk 441 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" printk 447 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" printk 459 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s:" printk 465 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: " printk 515 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - " printk 529 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n", printk 533 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting " printk 538 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: FW initialized, but " printk 568 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware " printk 602 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no, printk 638 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n", printk 699 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n", printk 716 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for " printk 733 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot " printk 741 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n", printk 752 drivers/scsi/qla4xxx/ql4_init.c printk(KERN_INFO "scsi%ld: %s: Boot firmware failed " printk 769 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Waiting for " printk 775 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Global Init Semaphore " printk 806 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: port_ctrl = 0x%08X\n", ha->host_no, printk 808 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no, printk 813 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: Hardware has already been " printk 819 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= " printk 836 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Get firmware " printk 843 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Firmware " printk 853 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: %s: Firmware in " printk 862 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been " printk 867 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ", printk 870 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no, printk 875 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%d: %s: Soft Reset failed!\n", printk 899 drivers/scsi/qla4xxx/ql4_init.c DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n", printk 995 drivers/scsi/qla4xxx/ql4_init.c DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no, printk 32 drivers/scsi/qla4xxx/ql4_inline.h DEBUG3(printk("scsi%d: %s: ddb [%d], ddb_entry = %p\n", printk 301 drivers/scsi/qla4xxx/ql4_iocb.c DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! " printk 46 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: %s: sense key = %x, " printk 87 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned " printk 138 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s: Command already returned back to " printk 172 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: " printk 200 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: Device RESET occurred\n", printk 208 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: Abort occurred\n", printk 216 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: Timeout\n", printk 235 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: " "Data overrun\n", printk 316 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: SCS_DEVICE " printk 336 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld:%d:%llu: %s: QUEUE FULL detected " printk 528 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s: FW device queue full, " printk 539 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s: Continuation entry - " printk 555 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s: Invalid entry %x in " printk 573 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s: Invalid handle(srb)=%p type=%x IOCS=%x\n", printk 713 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n", printk 726 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: AEN %04x, ERROR Status, " printk 769 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: AEN %04x DHCP LEASE " printk 783 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no, printk 788 drivers/scsi/qla4xxx/ql4_isr.c printk("scsi%ld: AEN %04x, mbox_sts[2]=%04x, " printk 837 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x, " printk 846 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: AEN %04x, mbox_sts[1]=%04x, " printk 865 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: AEN[%d] %04x queued " printk 881 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: %s: aen %04x, queue " printk 886 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: DUMP AEN QUEUE\n", printk 890 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("AEN[%d] %04x %04x %04x " printk 899 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_WARNING printk 905 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_WARNING printk 1014 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_WARNING printk 1020 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: Unknown mailbox status %08X\n", printk 1131 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO printk 1161 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO "scsi%ld: Fatal Error, " printk 1336 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk(KERN_INFO printk 1496 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("qla4xxx(%ld): AEN[%d]=0x%08x, mbx1=0x%08x mbx2=0x%08x" printk 1506 drivers/scsi/qla4xxx/ql4_isr.c DEBUG2(printk("scsi%ld: AEN[%d] %04x, index " printk 95 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts " printk 112 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, " printk 129 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n", printk 389 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk(KERN_WARNING "scsi%ld: %s: " printk 411 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk(KERN_WARNING "scsi%ld: %s: " printk 592 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk(KERN_WARNING printk 632 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n", printk 677 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk(KERN_WARNING printk 685 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n", printk 713 drivers/scsi/qla4xxx/ql4_mbx.c printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no, printk 721 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n", printk 754 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ " printk 762 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n", printk 785 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ " printk 840 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n", printk 857 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed" printk 863 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n", printk 969 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n", printk 1027 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n", printk 1033 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n", printk 1111 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event " printk 1125 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n", printk 1203 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%llu: abort task FAILED: " printk 1230 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld:%d:%llu: lun reset issued\n", ha->host_no, printk 1276 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no, printk 1316 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ " printk 1413 drivers/scsi/qla4xxx/ql4_mbx.c DEBUG2(printk("scsi%ld: %s: failed status %04X\n", printk 38 drivers/scsi/qla4xxx/ql4_nvram.c DEBUG5(printk(KERN_ERR "fm93c56a_select:\n")); printk 209 drivers/scsi/qla4xxx/ql4_nvram.c DEBUG2(printk("scsi%ld : Trying to get SEM lock - mask= 0x%x, code = " printk 217 drivers/scsi/qla4xxx/ql4_nvram.c DEBUG2(printk("scsi%ld : Got SEM LOCK - mask= 0x%x, " printk 236 drivers/scsi/qla4xxx/ql4_nvram.c DEBUG2(printk("scsi%ld : UNLOCK SEM - mask= 0x%x\n", ha->host_no, printk 250 drivers/scsi/qla4xxx/ql4_nvram.c DEBUG2(printk("scsi%ld : Got SEM LOCK - mask= 0x%x, code = " printk 634 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: QM access not handled.\n", __func__); printk 647 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Written OCMwin (0x%x) != Read" printk 662 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Written MSwin (0x%x) != Read " printk 674 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Warning:%s Unknown address range!\n", printk 733 drivers/scsi/qla4xxx/ql4_nx.c printk(KERN_ERR"%s out of bound pci memory access. " printk 806 drivers/scsi/qla4xxx/ql4_nx.c printk(KERN_ERR"%s out of bound pci memory access. " printk 930 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Timeout reached waiting for rom done", printk 946 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Error waiting for rom done\n", DRIVER_NAME); printk 1300 drivers/scsi/qla4xxx/ql4_nx.c DEBUG2(printk("scsi%ld: %s: bootldr=0x%lx, fw_image=0x%x\n", printk 1340 drivers/scsi/qla4xxx/ql4_nx.c printk(KERN_WARNING "%s: Error during CRB Initialization\n", printk 1358 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Error trying to load fw from flash!\n", __func__); printk 1581 drivers/scsi/qla4xxx/ql4_nx.c printk(KERN_WARNING "%s: init failed, " printk 1764 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Error trying to start fw!\n", __func__); printk 1770 drivers/scsi/qla4xxx/ql4_nx.c printk("%s: Error during card handshake!\n", __func__); printk 4000 drivers/scsi/qla4xxx/ql4_nx.c DEBUG2(printk("scsi%ld: %s: status = %d\n", ha->host_no, printk 4058 drivers/scsi/qla4xxx/ql4_nx.c DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", printk 4073 drivers/scsi/qla4xxx/ql4_nx.c DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO failed\n", printk 4081 drivers/scsi/qla4xxx/ql4_nx.c DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive" printk 4098 drivers/scsi/qla4xxx/ql4_nx.c DEBUG2(printk("scsi%ld: %s: mac %pM serial %s\n", printk 3066 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_ERR "qla4xxx: missing ep.\n"); printk 3283 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO "%s: DDB state [%d]\n", __func__, printk 3334 drivers/scsi/qla4xxx/ql4_os.c DEBUG3(printk(KERN_INFO "Status returned\n")); printk 3336 drivers/scsi/qla4xxx/ql4_os.c DEBUG3(printk(KERN_INFO "Response buffer")); printk 3979 drivers/scsi/qla4xxx/ql4_os.c DEBUG(printk("scsi: %s: Starting timer thread for adapter %d\n", printk 4332 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen " printk 4571 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: %s: scheduling dpc routine" printk 4641 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__)); printk 4694 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_WARNING printk 4976 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: recover adapter - retrying " printk 4985 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: recover adapter - " printk 4995 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: recover adapter " printk 5021 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no, printk 5296 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n", printk 5363 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n", printk 5384 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: %s: SR|FSR " printk 5500 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_WARNING printk 5506 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n", printk 5513 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO "%s: ioremap from %lx a size of %lx\n", printk 5519 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_ERR printk 6258 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); printk 8616 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_WARNING printk 8750 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi: %s: retrying adapter initialization " printk 8771 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n")); printk 8782 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi: %s: Starting kernel thread for " printk 8826 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_INFO printk 9217 drivers/scsi/qla4xxx/ql4_os.c DEBUG3(printk("scsi%ld:%d:%llu: Abort_task mbx failed.\n", printk 9221 drivers/scsi/qla4xxx/ql4_os.c DEBUG3(printk("scsi%ld:%d:%llu: Abort_task mbx success.\n", printk 9231 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld:%d:%llu: Abort handler timed out\n", printk 9270 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO printk 9337 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk(KERN_INFO printk 9423 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n", printk 9438 drivers/scsi/qla4xxx/ql4_os.c DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host. Adapter " printk 9886 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_ERR printk 9909 drivers/scsi/qla4xxx/ql4_os.c printk(KERN_INFO "QLogic iSCSI HBA Driver\n"); printk 72 drivers/scsi/qlogicfas.c printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name, printk 78 drivers/scsi/qlogicfas.c printk(KERN_WARNING "%s: probe failed for %#x\n", printk 84 drivers/scsi/qlogicfas.c printk(KERN_INFO "%s: Using preset base address of %03x," printk 203 drivers/scsi/qlogicfas.c printk(KERN_INFO "%s: no cards were found, please specify " printk 281 drivers/scsi/qlogicfas408.c printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i); printk 293 drivers/scsi/qlogicfas408.c printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n", printk 370 drivers/scsi/qlogicfas408.c printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j); printk 197 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n", printk 234 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n", printk 248 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n", printk 256 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n", printk 355 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n", printk 383 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n", printk 394 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n", printk 409 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n", printk 421 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n", printk 490 drivers/scsi/qlogicpti.c printk(KERN_ERR "Failed to load image \"%s\" err %d\n", printk 495 drivers/scsi/qlogicpti.c printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", printk 512 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!", printk 524 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id); printk 562 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n", printk 575 drivers/scsi/qlogicpti.c printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n", printk 595 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n", printk 609 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n", printk 625 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n", printk 657 drivers/scsi/qlogicpti.c printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id); printk 659 drivers/scsi/qlogicpti.c printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id); printk 664 drivers/scsi/qlogicpti.c printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id); printk 668 drivers/scsi/qlogicpti.c printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id); printk 673 drivers/scsi/qlogicpti.c printk("qlogicpti%d: You have a single ended device on a " printk 723 drivers/scsi/qlogicpti.c printk("PTI: Qlogic/ISP registers are unmappable\n"); printk 731 drivers/scsi/qlogicpti.c printk("PTI: Qlogic/ISP status register is unmappable\n"); printk 754 drivers/scsi/qlogicpti.c printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq); printk 759 drivers/scsi/qlogicpti.c printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id); printk 781 drivers/scsi/qlogicpti.c printk("SCSI ID %d ", qpti->scsi_id); printk 827 drivers/scsi/qlogicpti.c printk("QPTI: Cannot map response queue.\n"); printk 838 drivers/scsi/qlogicpti.c printk("QPTI: Cannot map request queue.\n"); printk 1053 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: request queue overflow\n", printk 1122 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n", printk 1235 drivers/scsi/qlogicpti.c printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n", printk 1254 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n", printk 1271 drivers/scsi/qlogicpti.c printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n", printk 1280 drivers/scsi/qlogicpti.c printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n", printk 1359 drivers/scsi/qlogicpti.c printk("(Firmware v%d.%d.%d)", qpti->fware_majrev, printk 1364 drivers/scsi/qlogicpti.c printk("(FCode %s)", fcode); printk 1368 drivers/scsi/qlogicpti.c printk("\nqlogicpti%d: [%s Wide, using %s interface]\n", printk 1374 drivers/scsi/qlogicpti.c printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id); printk 792 drivers/scsi/scsi.c printk(KERN_NOTICE "SCSI subsystem initialized\n"); printk 805 drivers/scsi/scsi.c printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n", printk 300 drivers/scsi/scsi_devinfo.c printk(KERN_WARNING "%s: %s string '%s' is too long\n", printk 359 drivers/scsi/scsi_devinfo.c printk(KERN_ERR "%s: no memory\n", __func__); printk 549 drivers/scsi/scsi_devinfo.c printk(KERN_ERR "%s: bad dev info string '%s' '%s'" printk 210 drivers/scsi/scsi_dh.c printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name); printk 231 drivers/scsi/scsi_dh.c printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name); printk 216 drivers/scsi/scsi_ioctl.c printk(KERN_WARNING "program %s is using a deprecated SCSI " printk 1991 drivers/scsi/scsi_lib.c printk(KERN_ERR "SCSI: can't init scsi sdb cache\n"); printk 2874 drivers/scsi/scsi_lib.c printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, " printk 45 drivers/scsi/scsi_netlink.c printk(KERN_WARNING "%s: discarding partial skb\n", printk 72 drivers/scsi/scsi_netlink.c printk(KERN_WARNING "%s: discarding partial message\n", printk 92 drivers/scsi/scsi_netlink.c printk(KERN_WARNING "%s: Msgtype %d failed - err %d\n", printk 122 drivers/scsi/scsi_netlink.c printk(KERN_ERR "%s: register of receive handler failed\n", printk 110 drivers/scsi/scsi_proc.c printk(KERN_ERR "%s: proc_mkdir failed for %s\n", printk 151 drivers/scsi/scsi_proc.c printk(KERN_ERR "%s: Failed to register host %d in" printk 159 drivers/scsi/scsi_scan.c printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n"); printk 304 drivers/scsi/scsi_scan.c printk(ALLOC_FAILURE_MSG, __func__); printk 424 drivers/scsi/scsi_scan.c printk(KERN_ERR "%s: allocation failure\n", __func__); printk 1343 drivers/scsi/scsi_scan.c printk(ALLOC_FAILURE_MSG, __func__); printk 580 drivers/scsi/scsi_transport_fc.c printk(KERN_WARNING printk 2321 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR printk 2340 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR printk 2364 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR printk 2383 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR printk 2596 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR "%s: allocation failure\n", __func__); printk 2642 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR "FC Remote Port device_add failed\n"); printk 3353 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR "%s: allocation failure\n", __func__); printk 3394 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR "FC Virtual Port device_add failed\n"); printk 3402 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR "FC Virtual Port LLDD Create failed\n"); printk 3414 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR printk 3575 drivers/scsi/scsi_transport_fc.c printk(KERN_ERR "ERROR: FC BSG request timeout - LLD " printk 218 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "Too many connections. Max supported %u\n", printk 2388 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "can not deliver iscsi offload message:OOM\n"); printk 2491 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "gracefully ignored host event (%d):%d OOM\n", printk 2522 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "gracefully ignored ping comp: OOM\n"); printk 2549 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "Could not allocate skb to send reply.\n"); printk 2725 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "iscsi: invalid session %d.\n", printk 2801 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "ep connect failed. Could not find " printk 2891 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "target discovery could not find host no %u\n", printk 2917 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "set_host_param could not find host no %u\n", printk 2940 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "set path could not find host no %u\n", printk 2983 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "set_iface_params could not find host no %u\n", printk 3005 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "iscsi_ping could not find host no %u\n", printk 3046 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "%s: failed. Could not find host no %u\n", printk 3056 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "can not deliver chap: OOM\n"); printk 3122 drivers/scsi/scsi_transport_iscsi.c printk(KERN_ERR "%s could not find host no %u\n", printk 3741 drivers/scsi/scsi_transport_iscsi.c printk(KERN_WARNING "Send reply failed, error %d\n", err); printk 4493 drivers/scsi/scsi_transport_iscsi.c printk(KERN_NOTICE "iscsi: registered transport (%s)\n", tt->name); printk 4554 drivers/scsi/scsi_transport_iscsi.c printk(KERN_INFO "Loading iSCSI transport class v%s.\n", printk 195 drivers/scsi/scsi_transport_sas.c printk("%s can't handle SMP requests\n", shost->hostt->name); printk 846 drivers/scsi/scsi_transport_sas.c printk(KERN_ERR "%s: Cannot create port links, err=%d\n", printk 1120 drivers/scsi/scsi_transport_sas.c printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n", printk 1522 drivers/scsi/scsi_transport_sas.c printk("fail to a bsg device %s\n", dev_name(&rphy->dev)); printk 1258 drivers/scsi/scsi_transport_spi.c printk("period = %s ns ", buf); printk 1262 drivers/scsi/scsi_transport_spi.c printk("offset = %d ", msg[off]); printk 1264 drivers/scsi/scsi_transport_spi.c printk("width = %d ", 8 << msg[width]); printk 1271 drivers/scsi/scsi_transport_spi.c printk("%s = %d ", desc, ptr); printk 1282 drivers/scsi/scsi_transport_spi.c printk ("%s ", extended_msgs[msg[2]]); printk 1284 drivers/scsi/scsi_transport_spi.c printk ("Extended Message, reserved code (0x%02x) ", printk 1305 drivers/scsi/scsi_transport_spi.c printk("%02x ", msg[i]); printk 1309 drivers/scsi/scsi_transport_spi.c printk("Identify disconnect %sallowed %s %d ", printk 1316 drivers/scsi/scsi_transport_spi.c printk("%s ", one_byte_msgs[msg[0]]); printk 1318 drivers/scsi/scsi_transport_spi.c printk("reserved (%02x) ", msg[0]); printk 1320 drivers/scsi/scsi_transport_spi.c printk("QAS Request "); printk 1324 drivers/scsi/scsi_transport_spi.c printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], printk 1327 drivers/scsi/scsi_transport_spi.c printk("reserved two byte (%02x %02x) ", printk 1331 drivers/scsi/scsi_transport_spi.c printk("reserved "); printk 1347 drivers/scsi/scsi_transport_spi.c printk("%02x ", msg[i]); printk 1350 drivers/scsi/scsi_transport_spi.c printk("%02x ", msg[0]); printk 1353 drivers/scsi/scsi_transport_spi.c printk("%02x ", msg[0]); printk 1356 drivers/scsi/scsi_transport_spi.c printk("%02x %02x", msg[0], msg[1]); printk 1359 drivers/scsi/scsi_transport_spi.c printk("%02x ", msg[0]); printk 140 drivers/scsi/scsicam.c printk("scsicam_bios_param : partition %d has system \n", printk 159 drivers/scsi/scsicam.c printk("scsicam_bios_param : end at h = %d, c = %d, s = %d\n", printk 177 drivers/scsi/scsicam.c printk("scsicam_bios_param : logical_end=%d physical_end=%d ext_physical_end=%d ext_cyl=%d\n" printk 189 drivers/scsi/scsicam.c printk("scsicam_bios_param : logical (%u) != physical (%u)\n", printk 2160 drivers/scsi/sd.c printk(KERN_CONT "."); printk 2190 drivers/scsi/sd.c printk(KERN_CONT "ready\n"); printk 2192 drivers/scsi/sd.c printk(KERN_CONT "not responding...\n"); printk 3629 drivers/scsi/sd.c SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n")); printk 3649 drivers/scsi/sd.c printk(KERN_ERR "sd: can't init extended cdb cache\n"); printk 3656 drivers/scsi/sd.c printk(KERN_ERR "sd: can't init extended cdb pool\n"); printk 3663 drivers/scsi/sd.c printk(KERN_ERR "sd: can't init discard page pool\n"); printk 3700 drivers/scsi/sd.c SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n")); printk 240 drivers/scsi/sgiwd93.c printk(KERN_WARNING "sgiwd93: Could not allocate memory for " printk 259 drivers/scsi/sgiwd93.c printk(KERN_WARNING "sgiwd93: Could not register irq %d " printk 63 drivers/scsi/sim710.c printk(KERN_WARNING "sim710: Must specify slot for id parameter\n"); printk 65 drivers/scsi/sim710.c printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val); printk 92 drivers/scsi/sim710.c printk(KERN_NOTICE "sim710: %s\n", dev_name(dev)); printk 93 drivers/scsi/sim710.c printk(KERN_NOTICE "sim710: irq = %d, clock = %d, base = 0x%lx, scsi_id = %d\n", printk 97 drivers/scsi/sim710.c printk(KERN_ERR "sim710: Failed to allocate host data\n"); printk 102 drivers/scsi/sim710.c printk(KERN_ERR "sim710: Failed to reserve IO region 0x%lx\n", printk 117 drivers/scsi/sim710.c printk(KERN_ERR "sim710: No host detected; card configuration problem?\n"); printk 124 drivers/scsi/sim710.c printk(KERN_ERR "sim710: request_irq failed\n"); printk 185 drivers/scsi/sim710.c printk(KERN_ERR "sim710.c, EISA card %s has incorrect scsi_id, setting to 7\n", dev_name(dev)); printk 194 drivers/scsi/sim710.c printk("sim710.c: irq nasty\n"); printk 89 drivers/scsi/sni_53c710.c printk(KERN_ERR "snirm710: request_irq failed!\n"); printk 3884 drivers/scsi/st.c printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n"); printk 4006 drivers/scsi/st.c printk(KERN_WARNING "st: append_to_buffer offset overflow.\n"); printk 4038 drivers/scsi/st.c printk(KERN_WARNING "st: from_buffer offset overflow.\n"); printk 4133 drivers/scsi/st.c printk(KERN_WARNING "st: Obsolete parameter %s\n", printk 4139 drivers/scsi/st.c printk(KERN_WARNING "st: invalid parameter in '%s'\n", printk 4486 drivers/scsi/st.c printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n", printk 4491 drivers/scsi/st.c printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n", printk 4504 drivers/scsi/st.c printk(KERN_ERR "Unable to get major %d for SCSI tapes\n", printk 4530 drivers/scsi/st.c printk(KERN_INFO "st: Unloaded.\n"); printk 809 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME "(%s): invalid status head\n", printk 833 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 843 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 851 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME "(%s): bad status size\n", printk 938 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 948 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 963 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 1038 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1088 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1124 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1136 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1189 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1202 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1292 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 1358 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 1398 drivers/scsi/stex.c printk(KERN_INFO DRV_NAME "(%s): request reset during init\n", printk 1434 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME "(%s): resetting: handshake failed\n", printk 1624 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME printk 1672 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): scsi_host_alloc failed\n", printk 1683 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): request regions failed\n", printk 1690 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): memory map failed\n", printk 1700 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): set dma mask failed\n", printk 1742 drivers/scsi/stex.c printk(KERN_WARNING DRV_NAME printk 1753 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n", printk 1762 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): ccb alloc failed\n", printk 1800 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): create workqueue failed\n", printk 1809 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): request irq failed\n", printk 1822 drivers/scsi/stex.c printk(KERN_ERR DRV_NAME "(%s): scsi_add_host failed\n", printk 2015 drivers/scsi/stex.c printk(KERN_INFO DRV_NAME printk 422 drivers/scsi/sun3_scsi.c printk("sun3scsi: fifo failed to empty!\n"); printk 98 drivers/scsi/sun3x_esp.c printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n", printk 114 drivers/scsi/sun3x_esp.c printk(KERN_ALERT PFX "esp%d: DMA will not " printk 267 drivers/scsi/sun_esp.c printk(KERN_ALERT PFX "esp%d: DMA_PEND_READ " printk 338 drivers/scsi/sun_esp.c printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n", printk 370 drivers/scsi/sun_esp.c printk(KERN_ALERT PFX "esp%d: DMA will not " printk 106 drivers/scsi/sym53c8xx_2/sym_glue.c printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s" printk 447 drivers/scsi/sym53c8xx_2/sym_glue.c printk("%s: command processing resumed\n", printk 1056 drivers/scsi/sym53c8xx_2/sym_glue.c printk("sym_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd); printk 1078 drivers/scsi/sym53c8xx_2/sym_glue.c printk("sym_user_command: target=%ld\n", target); printk 1092 drivers/scsi/sym53c8xx_2/sym_glue.c printk("sym_user_command: data=%ld\n", uc->data); printk 1126 drivers/scsi/sym53c8xx_2/sym_glue.c printk("sym_user_command: data=%ld\n", uc->data); printk 1247 drivers/scsi/sym53c8xx_2/sym_glue.c printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n", printk 1613 drivers/scsi/sym53c8xx_2/sym_glue.c printk("%s: detaching ...\n", sym_name(np)); printk 1622 drivers/scsi/sym53c8xx_2/sym_glue.c printk("%s: resetting chip\n", sym_name(np)); printk 1812 drivers/scsi/sym53c8xx_2/sym_glue.c printk(KERN_INFO "%s: recovering from a PCI slot reset\n", printk 1816 drivers/scsi/sym53c8xx_2/sym_glue.c printk(KERN_ERR "%s: Unable to enable after PCI reset\n", printk 1836 drivers/scsi/sym53c8xx_2/sym_glue.c printk(KERN_ERR "%s: Unable to reset scsi host\n", printk 65 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_emerg(args...) printk(KERN_EMERG args) printk 66 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_alert(args...) printk(KERN_ALERT args) printk 67 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_crit(args...) printk(KERN_CRIT args) printk 68 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_err(args...) printk(KERN_ERR args) printk 69 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_warning(args...) printk(KERN_WARNING args) printk 70 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_notice(args...) printk(KERN_NOTICE args) printk 71 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_info(args...) printk(KERN_INFO args) printk 72 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf_debug(args...) printk(KERN_DEBUG args) printk 73 drivers/scsi/sym53c8xx_2/sym_glue.h #define printf(args...) printk(args) printk 1026 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: msg type: 0x%x - MSG RING: %u/%u (%u) \n", printk 1035 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO printk 1045 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: device already exists\n"); printk 1056 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO printk 1069 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO printk 1128 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: failed to create work queue\n"); printk 1148 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: device does not support req_threshold\n"); printk 1153 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO printk 1350 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: using 64bit dma\n"); printk 1352 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: using 32bit dma\n"); printk 1354 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: failed to set DMA mask\n"); printk 1369 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: pci memory selection failed\n"); printk 1384 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR printk 1392 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR printk 1405 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: max_id: %u\n", max_id); printk 1415 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO printk 1426 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: failed to allocate host\n"); printk 1457 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: unable to allocate ring memory\n"); printk 1470 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: failed to allocate memory.\n"); printk 1483 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR "vmw_pvscsi: unable to allocate s/g table\n"); printk 1497 drivers/scsi/vmw_pvscsi.c printk(KERN_DEBUG "vmw_pvscsi: driver-based request coalescing %sabled\n", printk 1501 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: using MSI%s\n", printk 1506 drivers/scsi/vmw_pvscsi.c printk(KERN_INFO "vmw_pvscsi: using INTx\n"); printk 1512 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR printk 1519 drivers/scsi/vmw_pvscsi.c printk(KERN_ERR printk 375 drivers/scsi/wd33c93.c printk("Q-%d-%02x( ", cmd->device->id, cmd->cmnd[0])) printk 456 drivers/scsi/wd33c93.c DB(DB_QUEUE_COMMAND, printk(")Q ")) printk 482 drivers/scsi/wd33c93.c DB(DB_EXECUTE, printk("EX(")) printk 484 drivers/scsi/wd33c93.c DB(DB_EXECUTE, printk(")EX-0 ")) printk 506 drivers/scsi/wd33c93.c DB(DB_EXECUTE, printk(")EX-1 ")) printk 682 drivers/scsi/wd33c93.c printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : "")) printk 692 drivers/scsi/wd33c93.c printk("(%p,%d,%s:", buf, cnt, data_in_dir ? "in" : "out")) printk 816 drivers/scsi/wd33c93.c DB(DB_INTR, printk("{%02x:%02x-", asr, sr)) printk 834 drivers/scsi/wd33c93.c printk("[%p/%d:", cmd->SCp.ptr, cmd->SCp.this_residual)) printk 841 drivers/scsi/wd33c93.c printk("%p/%d]", cmd->SCp.ptr, cmd->SCp.this_residual)) printk 847 drivers/scsi/wd33c93.c DB(DB_INTR, printk("TIMEOUT")) printk 883 drivers/scsi/wd33c93.c DB(DB_INTR, printk("SELECT")) printk 919 drivers/scsi/wd33c93.c printk(" sending SDTR %02x03%02x%02x%02x ", printk 933 drivers/scsi/wd33c93.c printk("IN-%d.%d", cmd->SCp.this_residual, printk 945 drivers/scsi/wd33c93.c printk("OUT-%d.%d", cmd->SCp.this_residual, printk 958 drivers/scsi/wd33c93.c DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0])) printk 968 drivers/scsi/wd33c93.c DB(DB_INTR, printk("STATUS=")) printk 970 drivers/scsi/wd33c93.c DB(DB_INTR, printk("%02x", cmd->SCp.Status)) printk 986 drivers/scsi/wd33c93.c DB(DB_INTR, printk("MSG_IN=")) printk 1002 drivers/scsi/wd33c93.c DB(DB_INTR, printk("CCMP")) printk 1008 drivers/scsi/wd33c93.c DB(DB_INTR, printk("SDP")) printk 1014 drivers/scsi/wd33c93.c DB(DB_INTR, printk("RDP")) printk 1026 drivers/scsi/wd33c93.c DB(DB_INTR, printk("DIS")) printk 1033 drivers/scsi/wd33c93.c DB(DB_INTR, printk("REJ")) printk 1035 drivers/scsi/wd33c93.c printk("-REJ-"); printk 1049 drivers/scsi/wd33c93.c DB(DB_INTR, printk("EXT")) printk 1054 drivers/scsi/wd33c93.c printk("%02x", ucp[hostdata->incoming_ptr]); printk 1100 drivers/scsi/wd33c93.c printk(" sync_xfer=%02x\n", printk 1111 drivers/scsi/wd33c93.c printk("sending WDTR "); printk 1125 drivers/scsi/wd33c93.c printk printk 1149 drivers/scsi/wd33c93.c printk("Rejecting Unknown Message(%02x) ", msg); printk 1169 drivers/scsi/wd33c93.c DB(DB_INTR, printk("SX-DONE")) printk 1172 drivers/scsi/wd33c93.c DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun)) printk 1194 drivers/scsi/wd33c93.c printk printk 1204 drivers/scsi/wd33c93.c DB(DB_INTR, printk("SDP")) printk 1214 drivers/scsi/wd33c93.c DB(DB_INTR, printk("MSG_OUT=")) printk 1234 drivers/scsi/wd33c93.c DB(DB_INTR, printk("%02x", hostdata->outgoing_msg[0])) printk 1256 drivers/scsi/wd33c93.c printk(" - Already disconnected! "); printk 1261 drivers/scsi/wd33c93.c DB(DB_INTR, printk("UNEXP_DISC")) printk 1287 drivers/scsi/wd33c93.c DB(DB_INTR, printk("DISC")) printk 1289 drivers/scsi/wd33c93.c printk(" - Already disconnected! "); printk 1297 drivers/scsi/wd33c93.c DB(DB_INTR, printk(":%d", cmd->SCp.Status)) printk 1321 drivers/scsi/wd33c93.c printk("*** Unexpected DISCONNECT interrupt! ***"); printk 1334 drivers/scsi/wd33c93.c DB(DB_INTR, printk("RESEL%s", sr == CSR_RESEL_AM ? "_AM" : "")) printk 1365 drivers/scsi/wd33c93.c printk printk 1369 drivers/scsi/wd33c93.c printk("\r"); printk 1398 drivers/scsi/wd33c93.c printk printk 1416 drivers/scsi/wd33c93.c printk printk 1423 drivers/scsi/wd33c93.c printk printk 1430 drivers/scsi/wd33c93.c printk printk 1452 drivers/scsi/wd33c93.c printk printk 1490 drivers/scsi/wd33c93.c printk("--UNKNOWN INTERRUPT:%02x:%02x:%02x--", asr, sr, phs); printk 1494 drivers/scsi/wd33c93.c DB(DB_INTR, printk("} ")) printk 1575 drivers/scsi/wd33c93.c printk("scsi%d: reset. ", instance->host_no); printk 1632 drivers/scsi/wd33c93.c printk printk 1658 drivers/scsi/wd33c93.c printk("scsi%d: Aborting connected command - ", printk 1661 drivers/scsi/wd33c93.c printk("stopping DMA - "); printk 1667 drivers/scsi/wd33c93.c printk("sending wd33c93 ABORT command - "); printk 1674 drivers/scsi/wd33c93.c printk("flushing fifo - "); printk 1682 drivers/scsi/wd33c93.c printk printk 1692 drivers/scsi/wd33c93.c printk("sending wd33c93 DISCONNECT command - "); printk 1700 drivers/scsi/wd33c93.c printk("asr=%02x, sr=%02x.", asr, sr); printk 1724 drivers/scsi/wd33c93.c printk printk 1727 drivers/scsi/wd33c93.c printk("Abort SNOOZE. "); printk 1748 drivers/scsi/wd33c93.c printk("scsi%d: warning : SCSI command probably completed successfully" printk 2033 drivers/scsi/wd33c93.c printk("wd33c93-%d: chip=%s/%d no_sync=0x%x no_dma=%d", printk 2041 drivers/scsi/wd33c93.c printk(" debug_flags=0x%02x\n", hostdata->args); printk 2043 drivers/scsi/wd33c93.c printk(" debugging=OFF\n"); printk 2045 drivers/scsi/wd33c93.c printk(" setup_args="); printk 2047 drivers/scsi/wd33c93.c printk("%s,", setup_args[i]); printk 2048 drivers/scsi/wd33c93.c printk("\n"); printk 2049 drivers/scsi/wd33c93.c printk(" Version %s - %s\n", WD33C93_VERSION, WD33C93_DATE); printk 72 drivers/scsi/zalon.c printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __func__, status); printk 76 drivers/scsi/zalon.c printk(KERN_DEBUG "%s: SCSI clock %d\n", __func__, clock); printk 112 drivers/scsi/zalon.c printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __func__, printk 118 drivers/scsi/zalon.c printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __func__); printk 93 drivers/scsi/zorro7xx.c printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n", printk 100 drivers/scsi/zorro7xx.c printk(KERN_ERR "zorro7xx: Failed to allocate host data\n"); printk 122 drivers/scsi/zorro7xx.c printk(KERN_ERR "zorro7xx: No host detected; " printk 133 drivers/scsi/zorro7xx.c printk(KERN_ERR "zorro7xx: request_irq failed\n"); printk 889 drivers/sh/maple/maple.c printk(KERN_ERR "Maple bus registration failed\n"); printk 412 drivers/soc/fsl/qe/qe.c printk(KERN_INFO "qe-firmware: " printk 416 drivers/soc/fsl/qe/qe.c printk(KERN_INFO "qe-firmware: " printk 457 drivers/soc/fsl/qe/qe.c printk(KERN_ERR "qe-firmware: invalid pointer\n"); printk 467 drivers/soc/fsl/qe/qe.c printk(KERN_ERR "qe-firmware: not a microcode\n"); printk 473 drivers/soc/fsl/qe/qe.c printk(KERN_ERR "qe-firmware: unsupported version\n"); printk 479 drivers/soc/fsl/qe/qe.c printk(KERN_ERR "qe-firmware: invalid data\n"); printk 497 drivers/soc/fsl/qe/qe.c printk(KERN_ERR "qe-firmware: invalid length\n"); printk 504 drivers/soc/fsl/qe/qe.c printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); printk 515 drivers/soc/fsl/qe/qe.c printk(KERN_INFO printk 520 drivers/soc/fsl/qe/qe.c printk(KERN_INFO "qe-firmware: firmware '%s'\n", printk 264 drivers/soc/fsl/qe/qe_ic.c printk(KERN_ERR "Can't map reserved IRQ\n"); printk 347 drivers/soc/fsl/qe/qe_ic.c printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); printk 493 drivers/soc/fsl/qe/qe_ic.c printk(KERN_DEBUG "Registering qe_ic with sysfs...\n"); printk 497 drivers/soc/fsl/qe/qe_ic.c printk(KERN_ERR "Failed registering qe_ic sys class\n"); printk 502 drivers/soc/fsl/qe/qe_ic.c printk(KERN_ERR "Failed registering qe_ic sys device\n"); printk 155 drivers/soc/fsl/qe/qe_io.c printk(KERN_ERR "par_io not initialized\n"); printk 161 drivers/soc/fsl/qe/qe_io.c printk(KERN_ERR "pio-handle not available\n"); printk 169 drivers/soc/fsl/qe/qe_io.c printk(KERN_ERR "pio-map is not set!\n"); printk 174 drivers/soc/fsl/qe/qe_io.c printk(KERN_ERR "pio-map format wrong!\n"); printk 28 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num); printk 29 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs); printk 31 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n", printk 33 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n", printk 35 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n", printk 37 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n", printk 39 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n", printk 41 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n", printk 43 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n", printk 45 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n", printk 47 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n", printk 49 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n", printk 51 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n", printk 53 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n", printk 55 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n", printk 57 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n", printk 59 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n", printk 61 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n", printk 63 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n", printk 65 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n", printk 146 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: illegal UCC number\n", __func__); printk 152 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", printk 159 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: urfs is too small\n", __func__); printk 164 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: urfs is not aligned\n", __func__); printk 169 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); printk 174 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: urfset is not aligned\n", __func__); printk 179 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: utfs is not aligned\n", __func__); printk 184 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: utfet is not aligned\n", __func__); printk 189 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: utftt is not aligned\n", __func__); printk 195 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: Cannot allocate private data\n", printk 205 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); printk 229 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: cannot set UCC type\n", __func__); printk 268 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", printk 281 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", printk 312 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: illegal value for RX clock\n", printk 321 drivers/soc/fsl/qe/ucc_fast.c printk(KERN_ERR "%s: illegal value for TX clock\n", printk 135 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: illegal UCC number\n", __func__); printk 147 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "max_rx_buf_length not aligned.\n"); printk 153 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: Cannot allocate private data\n", printk 163 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); printk 183 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__); printk 196 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: cannot set UCC type", __func__); printk 210 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__, printk 221 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: cannot allocate TX BDs", __func__); printk 310 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: illegal value for RX clock\n", printk 318 drivers/soc/fsl/qe/ucc_slow.c printk(KERN_ERR "%s: illegal value for TX clock\n", printk 125 drivers/soc/ixp4xx/ixp4xx-npe.c printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) printk 33 drivers/soc/ixp4xx/ixp4xx-qmgr.c printk(KERN_DEBUG "Queue %s(%i) put %X\n", printk 46 drivers/soc/ixp4xx/ixp4xx-qmgr.c printk(KERN_DEBUG "Queue %s(%i) get %X\n", printk 300 drivers/soc/ixp4xx/ixp4xx-qmgr.c printk(KERN_ERR "qmgr: no free SRAM space for" printk 315 drivers/soc/ixp4xx/ixp4xx-qmgr.c printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n", printk 352 drivers/soc/ixp4xx/ixp4xx-qmgr.c printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n", printk 358 drivers/soc/ixp4xx/ixp4xx-qmgr.c printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", printk 975 drivers/spi/spi-au1550.c printk(KERN_ERR "au1550-spi: cannot add memory" printk 152 drivers/spi/spi-omap-uwire.c printk(KERN_ERR "%s: timeout. reg=%#06x " printk 194 drivers/spi/spi-sh.c printk(KERN_ERR "%s: timeout\n", __func__); printk 210 drivers/spi/spi-sh.c printk(KERN_ERR "%s: timeout\n", __func__); printk 247 drivers/spi/spi-sh.c printk(KERN_ERR "%s: timeout\n", __func__); printk 491 drivers/spi/spi-sh.c printk(KERN_ERR "spi_register_master error.\n"); printk 399 drivers/staging/exfat/exfat_super.c printk(KERN_INFO "EXFAT: Attempted to mount VFAT filesystem\n"); printk 239 drivers/staging/isdn/avm/avmcard.h printk(KERN_CRIT "b1lli(0x%x): rx not full after 1 second\n", base); printk 452 drivers/staging/isdn/avm/avmcard.h printk(KERN_DEBUG "b1lli(0x%x): get_slice l=%d w=%d b=%d\n", printk 170 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: corrupted firmware file ?\n", printk 186 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: corrupted firmware file ?\n", printk 257 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: b1_loaded: tx err, corrupted t4 file ?\n", printk 267 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: b1_loaded: got 0x%x, firmware not running\n", printk 272 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: b1_loaded: firmware not running\n", card->name); printk 290 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: failed to load t4file!!\n", printk 300 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: failed to load config!!\n", printk 307 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: failed to load t4file.\n", card->name); printk 459 drivers/staging/isdn/avm/b1.c printk(KERN_NOTICE "%s: card %d \"%s\" ready.\n", printk 464 drivers/staging/isdn/avm/b1.c printk(KERN_NOTICE "%s: card %d Protocol:%s%s%s%s%s%s%s\n", printk 478 drivers/staging/isdn/avm/b1.c printk(KERN_NOTICE "%s: card %d Linetype:%s%s%s%s\n", printk 529 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 543 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 591 drivers/staging/isdn/avm/b1.c printk(KERN_INFO "%s: %s-card (%s) now active\n", printk 609 drivers/staging/isdn/avm/b1.c printk(KERN_INFO "%s: task %d \"%s\" ready.\n", printk 623 drivers/staging/isdn/avm/b1.c printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf); printk 628 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: card removed ?\n", card->name); printk 632 drivers/staging/isdn/avm/b1.c printk(KERN_ERR "%s: b1_interrupt: 0x%x ???\n", printk 716 drivers/staging/isdn/avm/b1.c printk(KERN_WARNING "%s: no memory.\n", name); printk 723 drivers/staging/isdn/avm/b1.c printk(KERN_WARNING "%s: allocation of receive dma buffer failed.\n", name); printk 731 drivers/staging/isdn/avm/b1.c printk(KERN_WARNING "%s: allocation of send dma buffer failed.\n", name); printk 794 drivers/staging/isdn/avm/b1.c printk(KERN_INFO "b1: revision %s\n", rev); printk 398 drivers/staging/isdn/avm/b1dma.c printk(KERN_DEBUG "tx: put msg len=%d\n", txlen); printk 404 drivers/staging/isdn/avm/b1dma.c printk(KERN_INFO "%s: send ack\n", card->name); printk 407 drivers/staging/isdn/avm/b1dma.c printk(KERN_DEBUG "tx: put 0x%x len=%d\n", printk 432 drivers/staging/isdn/avm/b1dma.c printk(KERN_CRIT "%s: no memory, lost poll ack\n", printk 458 drivers/staging/isdn/avm/b1dma.c printk(KERN_DEBUG "rx: 0x%x %lu\n", b1cmd, (unsigned long)dma->recvlen); printk 474 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 488 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 527 drivers/staging/isdn/avm/b1dma.c printk(KERN_INFO "%s: receive poll\n", card->name); printk 542 drivers/staging/isdn/avm/b1dma.c printk(KERN_INFO "%s: %s-card (%s) now active\n", printk 559 drivers/staging/isdn/avm/b1dma.c printk(KERN_INFO "%s: task %d \"%s\" ready.\n", printk 572 drivers/staging/isdn/avm/b1dma.c printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf); printk 576 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: b1dma_interrupt: 0x%x ???\n", printk 614 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: rx not complete (%d).\n", printk 661 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: b1dma_loaded: tx err, corrupted t4 file ?\n", printk 671 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: b1dma_loaded: got 0x%x, firmware not running in dword mode\n", card->name, ans); printk 675 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: b1dma_loaded: firmware not running\n", card->name); printk 688 drivers/staging/isdn/avm/b1dma.c printk(KERN_CRIT "%s: no memory, lost register appl.\n", printk 714 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: failed to load t4file!!\n", printk 722 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: failed to load config!!\n", printk 730 drivers/staging/isdn/avm/b1dma.c printk(KERN_ERR "%s: failed to load t4file.\n", card->name); printk 787 drivers/staging/isdn/avm/b1dma.c printk(KERN_CRIT "%s: no memory, lost register appl.\n", printk 821 drivers/staging/isdn/avm/b1dma.c printk(KERN_CRIT "%s: no memory, lost release appl.\n", printk 971 drivers/staging/isdn/avm/b1dma.c printk(KERN_INFO "b1dma: revision %s\n", rev); printk 71 drivers/staging/isdn/avm/b1isa.c printk(KERN_WARNING "b1isa: no memory.\n"); printk 85 drivers/staging/isdn/avm/b1isa.c printk(KERN_WARNING "b1isa: invalid port 0x%x.\n", card->port); printk 90 drivers/staging/isdn/avm/b1isa.c printk(KERN_WARNING "b1isa: irq %d not valid.\n", card->irq); printk 95 drivers/staging/isdn/avm/b1isa.c printk(KERN_WARNING "b1isa: ports 0x%03x-0x%03x in use.\n", printk 102 drivers/staging/isdn/avm/b1isa.c printk(KERN_ERR "b1isa: unable to get IRQ %d.\n", card->irq); printk 107 drivers/staging/isdn/avm/b1isa.c printk(KERN_NOTICE "b1isa: NO card at 0x%x (%d)\n", printk 129 drivers/staging/isdn/avm/b1isa.c printk(KERN_ERR "b1isa: attach controller failed.\n"); printk 133 drivers/staging/isdn/avm/b1isa.c printk(KERN_INFO "b1isa: AVM B1 ISA at i/o %#x, irq %d, revision %d\n", printk 226 drivers/staging/isdn/avm/b1isa.c printk(KERN_INFO "b1isa: revision %s\n", rev); printk 72 drivers/staging/isdn/avm/b1pci.c printk(KERN_WARNING "b1pci: no memory.\n"); printk 84 drivers/staging/isdn/avm/b1pci.c printk(KERN_WARNING "b1pci: ports 0x%03x-0x%03x in use.\n", printk 92 drivers/staging/isdn/avm/b1pci.c printk(KERN_NOTICE "b1pci: NO card at 0x%x (%d)\n", printk 102 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: unable to get IRQ %d.\n", card->irq); printk 121 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: attach controller failed.\n"); printk 126 drivers/staging/isdn/avm/b1pci.c printk(KERN_INFO "b1pci: AVM B1 PCI V4 at i/o %#x, irq %d, revision %d (no dma)\n", printk 129 drivers/staging/isdn/avm/b1pci.c printk(KERN_INFO "b1pci: AVM B1 PCI at i/o %#x, irq %d, revision %d\n", printk 191 drivers/staging/isdn/avm/b1pci.c printk(KERN_WARNING "b1pci: no memory.\n"); printk 198 drivers/staging/isdn/avm/b1pci.c printk(KERN_WARNING "b1pci: dma alloc.\n"); printk 211 drivers/staging/isdn/avm/b1pci.c printk(KERN_WARNING "b1pci: ports 0x%03x-0x%03x in use.\n", printk 219 drivers/staging/isdn/avm/b1pci.c printk(KERN_NOTICE "b1pci: can't remap memory at 0x%lx\n", printk 229 drivers/staging/isdn/avm/b1pci.c printk(KERN_NOTICE "b1pci: NO card at 0x%x (%d)\n", printk 239 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: unable to get IRQ %d.\n", printk 259 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: attach controller failed.\n"); printk 264 drivers/staging/isdn/avm/b1pci.c printk(KERN_INFO "b1pci: AVM B1 PCI V4 at i/o %#x, irq %d, mem %#lx, revision %d (dma)\n", printk 309 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: failed to enable AVM-B1\n"); printk 321 drivers/staging/isdn/avm/b1pci.c printk(KERN_INFO "b1pci: PCI BIOS reports AVM-B1 V4 at i/o %#x, irq %d, mem %#x\n", printk 329 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: no AVM-B1 V4 at i/o %#x, irq %d, mem %#x detected\n", printk 336 drivers/staging/isdn/avm/b1pci.c printk(KERN_INFO "b1pci: PCI BIOS reports AVM-B1 at i/o %#x, irq %d\n", printk 340 drivers/staging/isdn/avm/b1pci.c printk(KERN_ERR "b1pci: no AVM-B1 at i/o %#x, irq %d detected\n", printk 401 drivers/staging/isdn/avm/b1pci.c printk(KERN_INFO "b1pci: revision %s\n", rev); printk 70 drivers/staging/isdn/avm/b1pcmcia.c printk(KERN_WARNING "b1pcmcia: no memory.\n"); printk 87 drivers/staging/isdn/avm/b1pcmcia.c printk(KERN_ERR "b1pcmcia: unable to get IRQ %d.\n", printk 94 drivers/staging/isdn/avm/b1pcmcia.c printk(KERN_NOTICE "b1pcmcia: NO card at 0x%x (%d)\n", printk 116 drivers/staging/isdn/avm/b1pcmcia.c printk(KERN_ERR "b1pcmcia: attach controller failed.\n"); printk 125 drivers/staging/isdn/avm/b1pcmcia.c printk(KERN_INFO "b1pcmcia: AVM %s at i/o %#x, irq %d, revision %d\n", printk 213 drivers/staging/isdn/avm/b1pcmcia.c printk(KERN_INFO "b1pci: revision %s\n", rev); printk 212 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: corrupted firmware file ?\n", printk 229 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: corrupted firmware file ?\n", printk 427 drivers/staging/isdn/avm/c4.c printk(KERN_DEBUG "%s: tx underrun\n", card->name); printk 451 drivers/staging/isdn/avm/c4.c printk(KERN_DEBUG "%s: tx put msg len=%d\n", card->name, txlen); printk 457 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "%s: ack to c4\n", card->name); printk 460 drivers/staging/isdn/avm/c4.c printk(KERN_DEBUG "%s: tx put 0x%x len=%d\n", printk 487 drivers/staging/isdn/avm/c4.c printk(KERN_CRIT "%s: no memory, lost poll ack\n", printk 516 drivers/staging/isdn/avm/c4.c printk(KERN_DEBUG "%s: rx 0x%x len=%lu\n", card->name, printk 536 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 555 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 594 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "%s: poll from c4\n", card->name); printk 615 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: card with %d controllers ??\n", printk 624 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "%s: %s-card (%s) now active\n", printk 641 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "%s: task %d \"%s\" ready.\n", printk 654 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf); printk 658 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: c4_interrupt: 0x%x ???\n", printk 680 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: unexpected reset\n", card->name); printk 739 drivers/staging/isdn/avm/c4.c printk(KERN_CRIT "%s: no memory, lost register appl.\n", printk 766 drivers/staging/isdn/avm/c4.c printk(KERN_CRIT "%s: no memory, send config\n", printk 792 drivers/staging/isdn/avm/c4.c printk(KERN_CRIT "%s: no memory, send config\n", printk 862 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: failed to load t4file!!\n", printk 886 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "%s: failed to set config!!\n", printk 967 drivers/staging/isdn/avm/c4.c printk(KERN_CRIT "%s: no memory, lost register appl.\n", printk 1007 drivers/staging/isdn/avm/c4.c printk(KERN_CRIT "%s: no memory, lost release appl.\n", printk 1142 drivers/staging/isdn/avm/c4.c printk(KERN_WARNING "c4: no memory.\n"); printk 1148 drivers/staging/isdn/avm/c4.c printk(KERN_WARNING "c4: no memory.\n"); printk 1160 drivers/staging/isdn/avm/c4.c printk(KERN_WARNING "c4: ports 0x%03x-0x%03x in use.\n", printk 1168 drivers/staging/isdn/avm/c4.c printk(KERN_NOTICE "c4: can't remap memory at 0x%lx\n", printk 1176 drivers/staging/isdn/avm/c4.c printk(KERN_NOTICE "c4: NO card at 0x%x error(%d)\n", printk 1185 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "c4: unable to get IRQ %d.\n", card->irq); printk 1206 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "c4: attach controller failed (%d).\n", i); printk 1217 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "c4: AVM C%d at i/o %#x, irq %d, mem %#lx\n", printk 1246 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "c4: failed to enable AVM-C%d\n", nr); printk 1255 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "c4: PCI BIOS reports AVM-C%d at i/o %#x, irq %d, mem %#x\n", printk 1260 drivers/staging/isdn/avm/c4.c printk(KERN_ERR "c4: no AVM-C%d at i/o %#x, irq %d detected, mem %#x\n", printk 1304 drivers/staging/isdn/avm/c4.c printk(KERN_INFO "c4: revision %s\n", rev); printk 171 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 186 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: incoming packet dropped\n", printk 233 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "%s: %s-card (%s) now active\n", printk 251 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "%s: task %d \"%s\" ready.\n", printk 265 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf); printk 271 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: card reseted ?\n", card->name); printk 275 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: b1_interrupt: 0x%x ???\n", printk 298 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: failed to load t4file!!\n", printk 306 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: failed to load config!!\n", printk 313 drivers/staging/isdn/avm/t1isa.c printk(KERN_ERR "%s: failed to load t4file.\n", card->name); printk 380 drivers/staging/isdn/avm/t1isa.c printk(KERN_WARNING "t1isa: no memory.\n"); printk 393 drivers/staging/isdn/avm/t1isa.c printk(KERN_WARNING "t1isa: invalid port 0x%x.\n", card->port); printk 398 drivers/staging/isdn/avm/t1isa.c printk(KERN_WARNING "t1isa: irq %d not valid.\n", card->irq); printk 403 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "t1isa: ports 0x%03x-0x%03x in use.\n", printk 410 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "t1isa: unable to get IRQ %d.\n", card->irq); printk 416 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "t1isa: NO card at 0x%x (%d)\n", printk 438 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "t1isa: attach controller failed.\n"); printk 442 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "t1isa: AVM T1 ISA at i/o %#x, irq %d, card %d\n", printk 575 drivers/staging/isdn/avm/t1isa.c printk(KERN_INFO "t1isa: revision %s\n", rev); printk 57 drivers/staging/isdn/avm/t1pci.c printk(KERN_WARNING "t1pci: no memory.\n"); printk 64 drivers/staging/isdn/avm/t1pci.c printk(KERN_WARNING "t1pci: no memory.\n"); printk 77 drivers/staging/isdn/avm/t1pci.c printk(KERN_WARNING "t1pci: ports 0x%03x-0x%03x in use.\n", printk 85 drivers/staging/isdn/avm/t1pci.c printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n", printk 96 drivers/staging/isdn/avm/t1pci.c printk(KERN_NOTICE "t1pci: NO card at 0x%x (%d)\n", printk 99 drivers/staging/isdn/avm/t1pci.c printk(KERN_NOTICE "t1pci: card at 0x%x, but cable not connected or T1 has no power (%d)\n", printk 108 drivers/staging/isdn/avm/t1pci.c printk(KERN_ERR "t1pci: unable to get IRQ %d.\n", card->irq); printk 127 drivers/staging/isdn/avm/t1pci.c printk(KERN_ERR "t1pci: attach controller failed.\n"); printk 133 drivers/staging/isdn/avm/t1pci.c printk(KERN_INFO "t1pci: AVM T1 PCI at i/o %#x, irq %d, mem %#lx\n", printk 196 drivers/staging/isdn/avm/t1pci.c printk(KERN_ERR "t1pci: failed to enable AVM-T1-PCI\n"); printk 205 drivers/staging/isdn/avm/t1pci.c printk(KERN_INFO "t1pci: PCI BIOS reports AVM-T1-PCI at i/o %#x, irq %d, mem %#x\n", printk 210 drivers/staging/isdn/avm/t1pci.c printk(KERN_ERR "t1pci: no AVM-T1-PCI at i/o %#x, irq %d detected, mem %#x\n", printk 247 drivers/staging/isdn/avm/t1pci.c printk(KERN_INFO "t1pci: revision %s\n", rev); printk 94 drivers/staging/isdn/gigaset/gigaset.h printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \ printk 375 drivers/staging/isdn/hysdn/boardergo.c printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n"); printk 54 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYCAPI: Invalid request app_id %d for controller %d", app_id, ctrl_no); printk 70 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n"); printk 87 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "HYCAPI hycapi_remove_ctr\n"); printk 91 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "No hycapictrl_info set!"); printk 124 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_send_message\n"); printk 132 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: CAPI-buffer overrun!\n", printk 164 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_register_appl\n"); printk 170 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n", printk 201 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_WARNING "HYSDN: hycapi_restart_internal"); printk 234 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_INFO "HYSDN: apl %d already registered\n", appl); printk 274 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_release_appl\n"); printk 278 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n", printk 305 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYCAPI: Releasing invalid appl %d on controller %d\n", appl, ctrl->cnr); printk 328 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_capi_release\n"); printk 348 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_capi_stop\n"); printk 391 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYCAPI: Controller mixup!\n"); printk 423 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN: memory squeeze in private_listen\n"); printk 481 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_load_firmware\n"); printk 491 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "%s\n", __func__); printk 525 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_rx_capipkt\n"); printk 532 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n", printk 543 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n", printk 553 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n", printk 572 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: NCPI not supported by current " printk 576 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: Message not supported in" printk 580 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: invalid PLCI\n", card->myid); printk 583 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: out of NCCI\n", card->myid); printk 586 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: NCPI not supported\n", printk 590 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "HYSDN Card%d: Info in CONNECT_B3_CONF: %d\n", printk 623 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_tx_capiack\n"); printk 730 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_NOTICE "hycapi_capi_create\n"); printk 738 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_WARNING "HYSDN: no memory for capi-ctrl.\n"); printk 770 drivers/staging/isdn/hysdn/hycapi.c printk(KERN_ERR "hycapi: attach controller failed.\n"); printk 70 drivers/staging/isdn/hysdn/hysdn_init.c printk(KERN_ERR "HYSDN: unable to alloc device mem \n"); printk 89 drivers/staging/isdn/hysdn/hysdn_init.c printk(KERN_WARNING "HYSDN: card at io 0x%04x already in use\n", card->iobase); printk 160 drivers/staging/isdn/hysdn/hysdn_init.c printk(KERN_NOTICE "HYSDN: module loaded\n"); printk 166 drivers/staging/isdn/hysdn/hysdn_init.c printk(KERN_INFO "HYSDN: %d card(s) found.\n", cardmax); printk 174 drivers/staging/isdn/hysdn/hysdn_init.c printk(KERN_ERR "HYCAPI: init failed\n"); printk 209 drivers/staging/isdn/hysdn/hysdn_init.c printk(KERN_NOTICE "HYSDN: module unloaded\n"); printk 202 drivers/staging/isdn/hysdn/hysdn_net.c printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", printk 257 drivers/staging/isdn/hysdn/hysdn_net.c printk(KERN_WARNING "No card-pt in hysdn_net_create!\n"); printk 264 drivers/staging/isdn/hysdn/hysdn_net.c printk(KERN_WARNING "HYSDN: unable to allocate mem\n"); printk 280 drivers/staging/isdn/hysdn/hysdn_net.c printk(KERN_WARNING "HYSDN: unable to create network device\n"); printk 367 drivers/staging/isdn/hysdn/hysdn_procconf.c printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n"); printk 384 drivers/staging/isdn/hysdn/hysdn_procconf.c printk(KERN_NOTICE "HYSDN: procfs initialised\n"); printk 87 drivers/staging/isdn/hysdn/hysdn_proclog.c printk(KERN_INFO "%s", pd->logtmp); printk 57 drivers/staging/isdn/hysdn/hysdn_sched.c printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len); printk 50 drivers/staging/rtl8192e/rtllib_debug.h printk(KERN_DEBUG DRV_NAME ":" x "\n", ##args);\ printk 452 drivers/staging/rtl8192u/ieee80211/ieee80211.h printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0) printk 460 drivers/staging/rtl8192u/ieee80211/ieee80211.h printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \ printk 462 drivers/staging/rtl8192u/ieee80211/ieee80211.h printk("%2x ", pdata[i]); \ printk 464 drivers/staging/rtl8192u/ieee80211/ieee80211.h printk("\n"); \ printk 466 drivers/staging/rtl8192u/ieee80211/ieee80211.h printk("\n"); \ printk 524 drivers/staging/rtl8192u/ieee80211/ieee80211.h #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) printk 525 drivers/staging/rtl8192u/ieee80211/ieee80211.h #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) printk 72 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate " printk 80 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate " printk 88 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate " printk 96 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate " printk 391 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "TKIP: received packet without ExtIV" printk 398 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "TKIP: RX tkey->key_idx=%d frame " printk 404 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "TKIP: received packet from %pM" printk 420 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "TKIP: replay detected: STA=%pM" printk 448 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG ": TKIP: failed to decrypt " printk 471 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "TKIP: ICV error detected: STA=" printk 562 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "Invalid packet for Michael MIC add " printk 631 drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c printk(KERN_DEBUG "%s: Michael MIC verification failed for " printk 71 drivers/staging/rtl8192u/ieee80211/ieee80211_module.c printk(KERN_WARNING "%s: Out of memory allocating beacons\n", printk 235 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_DEBUG "%s: Master mode not yet supported.\n", printk 264 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_DEBUG "%s: unknown management frame " printk 274 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: management frame " printk 352 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " printk 400 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed" printk 813 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("%s: A-MSDU parse error!! pRfd->nTotalSubframe : %d\n",\ printk 815 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("%s: A-MSDU parse error!! Subframe Length: %d\n", __func__, nSubframe_Length); printk 816 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("nRemain_Length is %d and nSubframe_Length is : %d\n", skb->len, nSubframe_Length); printk 817 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("The Packet SeqNum is %d\n", SeqNum); printk 907 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_INFO "%s: SKB length < 10\n", printk 922 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("find HTCControl\n"); printk 1116 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("decrypt frame error\n"); printk 1144 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_WARNING "%s: host decrypted and " printk 1181 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("==>decrypt msdu error\n"); printk 1866 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("========>%s(): athros AP is exist\n", __func__); printk 1983 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk(KERN_ERR printk 2360 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network->channel); printk 2367 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network->channel); printk 2375 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network->channel); printk 2382 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network->channel); printk 134 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_ALERT "This is enable turbo mode IE process\n"); printk 269 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("%s():insert to waitqueue!\n", __func__); printk 648 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("=================>%s():auth->algorithm is %d\n", __func__, auth->algorithm); printk 1273 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO "Associated successfully\n"); printk 1277 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO"Using G rates:%d\n", ieee->rate); printk 1280 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO"Using B rates:%d\n", ieee->rate); printk 1283 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Successfully associated, ht enabled\n"); printk 1286 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Successfully associated, ht not enabled(%d, %d)\n", ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bEnableHT); printk 1298 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("============>normal associate\n"); printk 1301 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("==================>silent reset associate\n"); printk 1331 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("===>%s(), chan:%d\n", __func__, ieee->current_network.channel); printk 1394 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO"Linking with %s,channel:%d, qos:%d, myHT:%d, networkHT:%d\n", printk 1424 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO"Using G rates\n"); printk 1428 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO"Using B rates\n"); printk 1625 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk(KERN_INFO"New client associated: %pM\n", dest); printk 1746 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Warning: driver is probably failing to report TX ps error\n"); printk 1938 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Association response status code 0x%x\n", printk 2215 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("==========oh driver down return\n"); printk 2251 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("creating new IBSS cell\n"); printk 2621 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("%s WPA\n", value ? "enabling" : "disabling"); printk 2649 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Unknown MLME request: %d\n", command); printk 2780 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Unknown WPA param: %d\n", name); printk 2807 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Len mismatch %d, %d\n", param_len, printk 2851 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("unknown crypto alg '%s'\n", param->u.crypt.alg); printk 2886 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("key setting failed\n"); printk 2929 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("reset_port failed\n"); printk 3016 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c printk("Unknown WPA supplicant request: %d\n", param->cmd); printk 323 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c printk("Scan in 40M, force to 20M first:%d, %d\n", chan_offset, bandwidth); printk 328 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c printk("Scan in 20M, back to 40M\n"); printk 462 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c printk(KERN_INFO"raw TX is %s\n", printk 173 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk("=========>%s(), crypt is null\n", __func__); printk 183 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " printk 207 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_INFO "%s: Encryption failed: len=%d.\n", printk 310 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk("===>can't get TS\n"); printk 560 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_WARNING "%s: No xmit handler.\n", printk 568 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_WARNING "%s: skb too small (%d).\n", printk 688 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_WARNING "%s: Could not allocate TXB\n", printk 782 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_WARNING "%s: skb too small (%d).\n", printk 789 drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c printk(KERN_WARNING "%s: Could not allocate TXB\n", printk 359 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk(KERN_WARNING "%s: could not initialize WEP: " printk 393 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk("Setting key %d to all zero.\n", printk 439 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); printk 573 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk("alg name:%s\n", alg); printk 579 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk("========>unknown crypto alg %d\n", ext->alg); printk 609 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk("key setting failed\n"); printk 795 drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c printk("len:%zu, ie:%d\n", len, ie[1]); printk 455 drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c printk("===========>%s,%pM\n", __func__, Addr); printk 466 drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c printk("====>remove Tx_TS_admin_list\n"); printk 118 drivers/staging/rtl8192u/r8192U.h printk("%2x ", pdata[i]); \ printk 120 drivers/staging/rtl8192u/r8192U.h printk("\n"); \ printk 122 drivers/staging/rtl8192u/r8192U.h printk("\n"); \ printk 591 drivers/staging/rtl8192u/r8192U_wx.c printk("wrong type in WEP, not WEP40 and WEP104\n"); printk 132 drivers/staging/rtl8712/rtl871x_debug.h #define _dbgdump printk printk 2188 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c printk("pattrib->pktlen = %d =>", pattrib->pkt_len); printk 2190 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c printk(" %02x ", pframe[pp]); printk 2191 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c printk("\n"); printk 1178 drivers/staging/rtl8723bs/core/rtw_pwrctrl.c printk("****** pnlo_info memory leak********\n"); printk 1181 drivers/staging/rtl8723bs/core/rtw_pwrctrl.c printk("****** pscan_info memory leak********\n"); printk 1184 drivers/staging/rtl8723bs/core/rtw_pwrctrl.c printk("****** pno_ssid_list memory leak********\n"); printk 1652 drivers/staging/rtl8723bs/hal/hal_com.c printk(", rx_ofdm_pwr:%d(dBm), rx_ofdm_snr:%d(dB)\n", printk 1655 drivers/staging/rtl8723bs/hal/hal_com.c printk("\n"); printk 89 drivers/staging/rtl8723bs/hal/odm_debug.h #define DbgPrint printk printk 1675 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("probe req pkt =>\n"); printk 1677 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" %02x ", ReservedPagePacket[BufIndex-TxDescLen+gj]); printk 1679 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("\n"); printk 1681 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" <=end\n"); printk 1697 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("PNO pkt =>\n"); printk 1699 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" %02x ", ReservedPagePacket[BufIndex-TxDescLen+gj]); printk 1701 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("\n"); printk 1703 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" <=end\n"); printk 1717 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("SSID list pkt =>\n"); printk 1719 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" %02x ", ReservedPagePacket[BufIndex-TxDescLen+gj]); printk 1721 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("\n"); printk 1723 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" <=end\n"); printk 1736 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("Scan info pkt =>\n"); printk 1738 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" %02x ", ReservedPagePacket[BufIndex-TxDescLen+gj]); printk 1740 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk("\n"); printk 1742 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c printk(" <=end\n"); printk 84 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("====>%s %d i:%d\n", __func__, __LINE__, i); printk 126 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("====>%s %d i:%d\n", __func__, __LINE__, i); printk 169 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("====>%s %d\n", __func__, __LINE__); printk 180 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("====>%s %d\n", __func__, __LINE__); printk 901 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("\n"); printk 902 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("%02X ", efuseTbl[i]); printk 904 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("\n"); printk 972 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("\n"); printk 973 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("%02X ", pbuf[i]); printk 975 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c printk("\n"); printk 149 drivers/staging/rtl8723bs/include/rtw_debug.h #define _dbgdump printk printk 248 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("-----------------Len %d----------------\n", wpa_len); printk 250 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("%02x ", wpa_ie[i]); printk 251 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("\n"); printk 252 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("-----------------Len %d----------------\n", wpa_len); printk 2898 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("%s ==> max_mac_id = %d\n", __func__, max_mac_id); printk 2996 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("===> Fixed channel to %d\n", extra_arg); printk 3004 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("===> Switch USB Mode %d\n", extra_arg); printk 4403 drivers/staging/rtl8723bs/os_dep/ioctl_linux.c printk("%s()-%d: rtw_malloc() ERROR!\n", __func__, __LINE__); printk 85 drivers/staging/rtl8723bs/os_dep/sdio_intf.c printk(KERN_CRIT "%s: sdio_claim_irq FAIL(%d)!\n", __func__, err); printk 18 drivers/staging/speakup/spk_priv.h #define pr_warn(fmt, arg...) printk(KERN_WARNING fmt, ##arg) printk 104 drivers/staging/uwb/driver.c printk(KERN_ERR "uwb: Can't initialize EST subsystem\n"); printk 49 drivers/staging/uwb/i1480/i1480-est.c printk(KERN_ERR "Can't register EST table fd00: %d\n", result); printk 55 drivers/staging/uwb/i1480/i1480-est.c printk(KERN_ERR "Can't register EST table fd01: %d\n", result); printk 293 drivers/staging/uwb/lc-dev.c printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n", printk 115 drivers/staging/uwb/umc-bus.c printk(KERN_WARNING "%s: rescan of bus failed: %d\n", printk 294 drivers/staging/uwb/uwbd.c printk(KERN_ERR "UWB: Cannot start management daemon; " printk 2227 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c printk(KERN_ERR "%s: g_state.remote == NULL\n", __func__); printk 2229 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c printk(KERN_NOTICE "%s: g_state.remote->initialised != 1 (%d)\n", printk 28 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0) printk 33 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0) printk 38 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0) printk 43 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0) printk 257 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: can't load CBCMAC-AES: %d\n", (int)result); printk 263 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: can't set CBCMAC-AES key: %d\n", (int)result); printk 325 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result); printk 327 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: OOB MIC test: " printk 330 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size); printk 332 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n", printk 335 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: MIC out:\n"); printk 337 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n"); printk 397 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: WUSB key derivation test: " printk 400 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: WUSB key derivation test: " printk 403 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: keydvt in: key\n"); printk 405 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: keydvt in: nonce\n"); printk 407 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: keydvt in: hnonce & dnonce\n"); printk 409 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: keydvt out: KCK\n"); printk 411 drivers/staging/wusbcore/crypto.c printk(KERN_ERR "E: keydvt out: PTK\n"); printk 1987 drivers/staging/wusbcore/wa-xfer.c printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n", printk 458 drivers/staging/wusbcore/wusbhc.c printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); printk 478 drivers/staging/wusbcore/wusbhc.c printk(KERN_ERR "BUG: WUSB Cluster IDs not released on exit: %*pb\n", printk 1941 drivers/target/sbp/sbp_target.c printk(KERN_INFO "err %u len %zu pos %u\n", printk 950 drivers/target/target_core_configfs.c printk(KERN_ERR "dev[%p]: SE Device emulation of restricted" printk 137 drivers/target/target_core_tmr.c printk("ABORT_TASK: Found referenced %s task_tag: %llu\n", printk 156 drivers/target/target_core_tmr.c printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for" printk 164 drivers/target/target_core_tmr.c printk("ABORT_TASK: Sending TMR_TASK_DOES_NOT_EXIST for ref_tag: %lld\n", printk 211 drivers/target/target_core_tmr.c printk("LUN_RESET TMR: non-zero kref_get_unless_zero\n"); printk 360 drivers/target/target_core_user.c printk(KERN_ERR "TCMU_ATTR_CMD_STATUS or TCMU_ATTR_DEVICE_ID not set, doing nothing\n"); printk 422 drivers/target/target_core_user.c printk(KERN_INFO "tcmu daemon: command reply support %u.\n", printk 2306 drivers/target/target_core_user.c printk(KERN_ERR "Invalid qfull timeout value %d\n", val); printk 47 drivers/tty/amiserial.c #define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ printk 146 drivers/tty/amiserial.c printk(badinfo, name, routine); printk 150 drivers/tty/amiserial.c printk(badmagic, name, routine); printk 275 drivers/tty/amiserial.c printk("DR%02x:%02x...", ch, status); printk 312 drivers/tty/amiserial.c printk("handling break...."); printk 369 drivers/tty/amiserial.c printk("THRE..."); printk 404 drivers/tty/amiserial.c printk("ttyS%d CD now %s...", info->line, printk 411 drivers/tty/amiserial.c printk("doing serial hangup..."); printk 421 drivers/tty/amiserial.c printk("CTS tx start..."); printk 436 drivers/tty/amiserial.c printk("CTS tx stop..."); printk 468 drivers/tty/amiserial.c printk("ser_rx_int..."); printk 476 drivers/tty/amiserial.c printk("end.\n"); printk 487 drivers/tty/amiserial.c printk("ser_tx_int..."); printk 495 drivers/tty/amiserial.c printk("end.\n"); printk 540 drivers/tty/amiserial.c printk("starting up ttys%d ...", info->line); printk 602 drivers/tty/amiserial.c printk("Shutting down serial port %d ....\n", info->line); printk 952 drivers/tty/amiserial.c printk("throttle %s ....\n", tty_name(tty)); printk 974 drivers/tty/amiserial.c printk("unthrottle %s ....\n", tty_name(tty)); printk 1416 drivers/tty/amiserial.c printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); printk 1417 drivers/tty/amiserial.c printk("jiff=%lu...", jiffies); printk 1421 drivers/tty/amiserial.c printk("serdatr = %d (jiff=%lu)...", lsr, jiffies); printk 1432 drivers/tty/amiserial.c printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); printk 1558 drivers/tty/amiserial.c printk(KERN_INFO "%s version %s\n", serial_name, serial_version); printk 1660 drivers/tty/amiserial.c printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n"); printk 1718 drivers/tty/amiserial.c printk("SERIAL: failed to unregister serial driver (%d)\n", printk 335 drivers/tty/cyclades.c printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " printk 341 drivers/tty/cyclades.c printk(KERN_WARNING "cyc Warning: bad magic number for serial " printk 447 drivers/tty/cyclades.c printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); printk 578 drivers/tty/cyclades.c printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); printk 766 drivers/tty/cyclades.c printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n", printk 852 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); printk 853 drivers/tty/cyclades.c printk(KERN_DEBUG " status: 0x%x, 0x%x\n", printk 862 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); printk 863 drivers/tty/cyclades.c printk(KERN_DEBUG " status: 0x%x, 0x%x\n", printk 1150 drivers/tty/cyclades.c printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " printk 1160 drivers/tty/cyclades.c printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " printk 1186 drivers/tty/cyclades.c printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " printk 1209 drivers/tty/cyclades.c printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", printk 1318 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " printk 1345 drivers/tty/cyclades.c printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " printk 1352 drivers/tty/cyclades.c printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " printk 1376 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc startup done\n"); printk 1404 drivers/tty/cyclades.c printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " printk 1452 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " printk 1478 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc shutdown done\n"); printk 1520 drivers/tty/cyclades.c printk(KERN_ERR "cyc:Cyclades-Z Error: you " printk 1525 drivers/tty/cyclades.c printk(KERN_ERR "cyc:Cyclades-Z firmware not " printk 1547 drivers/tty/cyclades.c printk(KERN_ERR "cyc:IRQ enable retval " printk 1559 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); printk 1566 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, printk 1571 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", printk 1585 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " printk 1595 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_open done\n"); printk 1667 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); printk 1685 drivers/tty/cyclades.c printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " printk 1727 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_close retval on " printk 1771 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); printk 1820 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); printk 1853 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); printk 1878 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); printk 1900 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", printk 1918 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", printk 2229 drivers/tty/cyclades.c printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " printk 2240 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); printk 2246 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); printk 2252 drivers/tty/cyclades.c printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " printk 2455 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n"); printk 2461 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:set_modem_info clearing " printk 2469 drivers/tty/cyclades.c printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " printk 2521 drivers/tty/cyclades.c printk(KERN_ERR "cyc:cy_break (set) retval on " printk 2529 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_break (clr) retval " printk 2633 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", printk 2731 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_ioctl done\n"); printk 2772 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); printk 2832 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:throttle %s ...ttyC%d\n", tty_name(tty), printk 2871 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:unthrottle %s ...ttyC%d\n", printk 2908 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); printk 2932 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); printk 2956 drivers/tty/cyclades.c printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); printk 3022 drivers/tty/cyclades.c printk(KERN_ERR "%s: retval on ttyC%d was %x\n", printk 3025 drivers/tty/cyclades.c printk(KERN_DEBUG "%s: raising Z DTR\n", __func__); printk 3060 drivers/tty/cyclades.c printk(KERN_ERR "Cyclades: cannot allocate ports\n"); printk 3135 drivers/tty/cyclades.c printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); printk 3261 drivers/tty/cyclades.c printk(KERN_ERR "Cyclom-Y/ISA: can't remap base " printk 3278 drivers/tty/cyclades.c printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the " printk 3286 drivers/tty/cyclades.c printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " printk 3300 drivers/tty/cyclades.c printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " printk 3311 drivers/tty/cyclades.c printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " printk 3334 drivers/tty/cyclades.c printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " printk 3408 drivers/tty/cyclades.c printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h)); printk 3417 drivers/tty/cyclades.c printk(BAD_FW "too short"); printk 3423 drivers/tty/cyclades.c printk(BAD_FW "bad formatted header string\n"); printk 3428 drivers/tty/cyclades.c printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name); printk 3436 drivers/tty/cyclades.c printk(BAD_FW "bad block ref number in cfgs\n"); printk 3443 drivers/tty/cyclades.c printk(BAD_FW "nothing appropriate\n"); printk 3449 drivers/tty/cyclades.c printk(BAD_FW "bad block data offset\n"); printk 4023 drivers/tty/cyclades.c printk(KERN_INFO "Cyclades driver " CY_VERSION "\n"); printk 4041 drivers/tty/cyclades.c printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); printk 4082 drivers/tty/cyclades.c printk(KERN_ERR "failed to unregister Cyclades serial " printk 374 drivers/tty/hvc/hvc_console.c printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); printk 426 drivers/tty/hvc/hvc_console.c printk(KERN_ERR "hvc_close %X: oops, count is %d\n", printk 1043 drivers/tty/hvc/hvc_console.c printk(KERN_ERR "Couldn't create kthread for console.\n"); printk 1050 drivers/tty/hvc/hvc_console.c printk(KERN_ERR "Couldn't register hvc console driver\n"); printk 373 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n"); printk 408 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: vterm state unchanged. " printk 415 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: vterm state unchanged. The" printk 421 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: Closed vty-server@%X and" printk 488 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: rescanning partner info for all" printk 698 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: Closed vty-server@%X and" printk 704 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n", printk 732 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: hvcs_index_list NOT valid!.\n"); printk 754 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: probed with invalid parameter.\n"); printk 794 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: Failed to fetch partner" printk 810 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n", printk 815 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address); printk 855 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: vty-server@%X removed from the" printk 906 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: Failed to fetch partner" printk 1007 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: vty-server or partner" printk 1042 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: int enable failed for" printk 1047 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: irq req failed for" printk 1100 drivers/tty/hvc/hvcs.c printk(KERN_WARNING "HVCS: open failed, no device associated" printk 1111 drivers/tty/hvc/hvcs.c printk(KERN_WARNING "HVCS: partner connect failed.\n"); printk 1139 drivers/tty/hvc/hvcs.c printk(KERN_WARNING "HVCS: enable device failed.\n"); printk 1175 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n", printk 1231 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n", printk 1325 drivers/tty/hvc/hvcs.c printk(KERN_WARNING "HVCS write: count being truncated to" printk 1516 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: registration as a tty driver failed.\n"); printk 1529 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: khvcsd creation failed.\n"); printk 1553 drivers/tty/hvc/hvcs.c printk(KERN_ERR "HVCS: can't register vio driver\n"); printk 1598 drivers/tty/hvc/hvcs.c printk(KERN_INFO "HVCS: driver module removed.\n"); printk 192 drivers/tty/hvc/hvsi.c printk(" "); printk 194 drivers/tty/hvc/hvsi.c printk("%.2x", data[i]); printk 196 drivers/tty/hvc/hvsi.c printk("\n "); printk 199 drivers/tty/hvc/hvsi.c printk("%c", data[i]); printk 201 drivers/tty/hvc/hvsi.c printk("."); printk 203 drivers/tty/hvc/hvsi.c printk("\n"); printk 210 drivers/tty/hvc/hvsi.c printk("type 0x%x, len %i, seqno %i:\n", header->type, header->len, printk 247 drivers/tty/hvc/hvsi.c printk(KERN_WARNING "hvsi%i: unknown HVSI control packet: ", printk 273 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: unexpected query response: ", hp->index); printk 297 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: couldn't send query response!\n", printk 315 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: unexpected query: ", hp->index); printk 413 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: got malformed packet\n", hp->index); printk 440 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: unknown HVSI packet type 0x%x\n", printk 555 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index, printk 572 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: didn't get modem flags\n", hp->index); printk 602 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index); printk 635 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: couldn't send version query\n", hp->index); printk 654 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: re-handshaking failed\n", hp->index); printk 660 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: lost console!\n", hp->index); printk 727 drivers/tty/hvc/hvsi.c printk(KERN_ERR "%s: HVSI handshaking failed\n", tty->name); printk 733 drivers/tty/hvc/hvsi.c printk(KERN_ERR "%s: couldn't get initial modem flags\n", tty->name); printk 739 drivers/tty/hvc/hvsi.c printk(KERN_ERR "%s: couldn't set DTR\n", tty->name); printk 808 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n", printk 844 drivers/tty/hvc/hvsi.c printk(KERN_ERR "hvsi%i: service processor died\n", hp->index); printk 1067 drivers/tty/hvc/hvsi.c printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n", printk 1075 drivers/tty/hvc/hvsi.c printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count); printk 1197 drivers/tty/hvc/hvsi.c printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", printk 82 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 631 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 649 drivers/tty/ipwireless/hardware.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 673 drivers/tty/ipwireless/hardware.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 774 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 865 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 881 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1127 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1168 drivers/tty/ipwireless/hardware.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME printk 1196 drivers/tty/ipwireless/hardware.c printk(KERN_WARNING IPWIRELESS_PCCARD_NAME printk 1199 drivers/tty/ipwireless/hardware.c printk(KERN_WARNING IPWIRELESS_PCCARD_NAME printk 1206 drivers/tty/ipwireless/hardware.c printk(KERN_WARNING IPWIRELESS_PCCARD_NAME printk 1454 drivers/tty/ipwireless/hardware.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 1463 drivers/tty/ipwireless/hardware.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 1491 drivers/tty/ipwireless/hardware.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 1501 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n"); printk 1506 drivers/tty/ipwireless/hardware.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 1537 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1553 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1561 drivers/tty/ipwireless/hardware.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME printk 1567 drivers/tty/ipwireless/hardware.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME printk 1572 drivers/tty/ipwireless/hardware.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME printk 1592 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1672 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1686 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 1694 drivers/tty/ipwireless/hardware.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 193 drivers/tty/ipwireless/main.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", printk 195 drivers/tty/ipwireless/main.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 199 drivers/tty/ipwireless/main.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 80 drivers/tty/ipwireless/network.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME printk 150 drivers/tty/ipwireless/network.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n"); printk 262 drivers/tty/ipwireless/network.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 279 drivers/tty/ipwireless/network.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 476 drivers/tty/ipwireless/network.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n"); printk 484 drivers/tty/ipwireless/network.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n"); printk 171 drivers/tty/ipwireless/tty.c printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME printk 463 drivers/tty/ipwireless/tty.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 526 drivers/tty/ipwireless/tty.c printk(KERN_INFO IPWIRELESS_PCCARD_NAME printk 589 drivers/tty/ipwireless/tty.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 605 drivers/tty/ipwireless/tty.c printk(KERN_ERR IPWIRELESS_PCCARD_NAME printk 489 drivers/tty/moxa.c printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic " printk 498 drivers/tty/moxa.c printk(KERN_ERR "MOXA: bios upload failed -- board not found\n"); printk 508 drivers/tty/moxa.c printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n"); printk 651 drivers/tty/moxa.c printk(KERN_ERR "MOXA: bios length is not even\n"); printk 773 drivers/tty/moxa.c printk(KERN_WARNING "MOXA firmware: unexpected input " printk 816 drivers/tty/moxa.c printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn); printk 831 drivers/tty/moxa.c printk(KERN_ERR "cannot allocate memory for ports\n"); printk 858 drivers/tty/moxa.c printk(KERN_ERR "MOXA: request_firmware failed. Make sure " printk 1030 drivers/tty/moxa.c printk(KERN_INFO "MOXA Intellio family driver version %s\n", printk 1055 drivers/tty/moxa.c printk(KERN_ERR "can't register MOXA Smartio tty driver!\n"); printk 1076 drivers/tty/moxa.c printk(KERN_ERR "MOXA: can't remap %lx\n", printk 1086 drivers/tty/moxa.c printk(KERN_INFO "MOXA isa board found at 0x%.8lx and " printk 1098 drivers/tty/moxa.c printk(KERN_ERR "Can't register MOXA pci driver!\n"); printk 1122 drivers/tty/moxa.c printk(KERN_ERR "Couldn't unregister MOXA Intellio family " printk 2384 drivers/tty/mxser.c printk(KERN_INFO "mxser: max. baud rate = %d bps\n", printk 2421 drivers/tty/mxser.c printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " printk 2495 drivers/tty/mxser.c printk(KERN_ERR "mxser: interrupt number unset\n"); printk 2502 drivers/tty/mxser.c printk(KERN_ERR "mxser: invalid interrupt vector\n"); printk 2532 drivers/tty/mxser.c printk(KERN_ERR "mxser: can't request ports I/O region: " printk 2542 drivers/tty/mxser.c printk(KERN_ERR "mxser: can't request interrupt vector region: " printk 2551 drivers/tty/mxser.c printk(KERN_ERR "mxser: invalid interrupt number\n"); printk 2711 drivers/tty/mxser.c printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", printk 2727 drivers/tty/mxser.c printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " printk 2744 drivers/tty/mxser.c printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", printk 2778 drivers/tty/mxser.c printk(KERN_ERR "mxser: can't register pci driver\n"); printk 239 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__); printk 293 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__); printk 297 drivers/tty/n_hdlc.c printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n"); printk 316 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__); printk 331 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n", printk 337 drivers/tty/n_hdlc.c printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" ); printk 343 drivers/tty/n_hdlc.c printk (KERN_ERR "n_hdlc_alloc failed\n"); printk 360 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__); printk 382 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__); printk 398 drivers/tty/n_hdlc.c printk("%s(%d)sending frame %p, count=%d\n", printk 417 drivers/tty/n_hdlc.c printk("%s(%d)frame %p completed\n", printk 430 drivers/tty/n_hdlc.c printk("%s(%d)frame %p pending\n", printk 454 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__); printk 469 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__); printk 500 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_receive() called count=%d\n", printk 509 drivers/tty/n_hdlc.c printk("%s(%d) line not using HDLC discipline\n", printk 516 drivers/tty/n_hdlc.c printk("%s(%d) rx count>maxframesize, data discarded\n", printk 532 drivers/tty/n_hdlc.c printk("%s(%d) no more rx buffers, data discarded\n", printk 569 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); printk 577 drivers/tty/n_hdlc.c printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user " printk 654 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_write() called count=%zd\n", printk 667 drivers/tty/n_hdlc.c printk (KERN_WARNING printk 692 drivers/tty/n_hdlc.c printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc); printk 739 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_ioctl() called %d\n", printk 807 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__); printk 860 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i); printk 869 drivers/tty/n_hdlc.c printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i); printk 959 drivers/tty/n_hdlc.c printk(hdlc_banner, maxframe); printk 963 drivers/tty/n_hdlc.c printk(hdlc_register_ok); printk 965 drivers/tty/n_hdlc.c printk(hdlc_register_fail, status); printk 987 drivers/tty/n_hdlc.c printk(hdlc_unregister_fail, status); printk 989 drivers/tty/n_hdlc.c printk(hdlc_unregister_ok); printk 83 drivers/tty/n_r3964.c #define TRACE(format, args...) printk("r3964: " format "\n" , ## args) printk 86 drivers/tty/n_r3964.c #define TRACE_M(format, args...) printk("r3964: " format "\n" , ## args) printk 91 drivers/tty/n_r3964.c #define TRACE_PS(format, args...) printk("r3964: " format "\n" , ## args) printk 96 drivers/tty/n_r3964.c #define TRACE_PE(format, args...) printk("r3964: " format "\n" , ## args) printk 101 drivers/tty/n_r3964.c #define TRACE_L(format, args...) printk("r3964: " format "\n" , ## args) printk 106 drivers/tty/n_r3964.c #define TRACE_Q(format, args...) printk("r3964: " format "\n" , ## args) printk 195 drivers/tty/n_r3964.c printk(KERN_ERR "r3964: error unregistering linediscipline: " printk 206 drivers/tty/n_r3964.c printk("r3964: Philips r3964 Driver $Revision: 1.10 $\n"); printk 220 drivers/tty/n_r3964.c printk(KERN_ERR "r3964: error registering line discipline: " printk 269 drivers/tty/n_r3964.c printk("r3964: remove_from_tx_queue: %p, length %u - ", printk 272 drivers/tty/n_r3964.c printk("%p ", pDump); printk 273 drivers/tty/n_r3964.c printk("\n"); printk 959 drivers/tty/n_r3964.c printk(KERN_ERR "r3964: failed to alloc info structure\n"); printk 967 drivers/tty/n_r3964.c printk(KERN_ERR "r3964: failed to alloc receive buffer\n"); printk 977 drivers/tty/n_r3964.c printk(KERN_ERR "r3964: failed to alloc transmit buffer\n"); printk 1161 drivers/tty/n_r3964.c printk(KERN_ERR "r3964_write: no memory\n"); printk 1576 drivers/tty/nozomi.c printk("noz: activated %d: %p\n", tty->index, tport); printk 1598 drivers/tty/nozomi.c printk("noz: shutdown %p\n", tport); printk 1854 drivers/tty/nozomi.c printk(KERN_INFO "Initializing %s\n", VERSION_STRING); printk 1875 drivers/tty/nozomi.c printk(KERN_ERR "Nozomi: failed to register ntty driver\n"); printk 1881 drivers/tty/nozomi.c printk(KERN_ERR "Nozomi: can't register pci driver\n"); printk 1895 drivers/tty/nozomi.c printk(KERN_INFO "Unloading %s\n", DRIVER_DESC); printk 288 drivers/tty/rocket.c printk(KERN_WARNING "Warning: bad magic number for rocketport " printk 310 drivers/tty/rocket.c printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv); printk 323 drivers/tty/rocket.c printk(KERN_INFO "Entering STATMODE...\n"); printk 337 drivers/tty/rocket.c printk(KERN_INFO "Ignore %x, read %x...\n", printk 345 drivers/tty/rocket.c printk(KERN_INFO "%x...\n", CharNStat); printk 375 drivers/tty/rocket.c printk(KERN_INFO "Status mode off.\n"); printk 388 drivers/tty/rocket.c printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space); printk 418 drivers/tty/rocket.c printk(KERN_DEBUG "%s\n", __func__); printk 425 drivers/tty/rocket.c printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); printk 449 drivers/tty/rocket.c printk(KERN_INFO "tx %d chars...\n", c); printk 467 drivers/tty/rocket.c printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, printk 486 drivers/tty/rocket.c printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " printk 495 drivers/tty/rocket.c printk(KERN_INFO "rp_interrupt %02x...\n", IntMask); printk 503 drivers/tty/rocket.c printk(KERN_INFO "ttyR%d CD now %s...\n", info->line, printk 508 drivers/tty/rocket.c printk(KERN_INFO "CD drop, calling hangup.\n"); printk 517 drivers/tty/rocket.c printk(KERN_INFO "CTS change...\n"); printk 520 drivers/tty/rocket.c printk(KERN_INFO "DSR change...\n"); printk 621 drivers/tty/rocket.c printk(KERN_ERR "Couldn't allocate info struct for line #%d\n", printk 653 drivers/tty/rocket.c printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", printk 903 drivers/tty/rocket.c printk(KERN_INFO "rocket mod++ = %d...\n", printk 908 drivers/tty/rocket.c printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count); printk 952 drivers/tty/rocket.c printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); printk 973 drivers/tty/rocket.c printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); printk 1034 drivers/tty/rocket.c printk(KERN_INFO "rocket mod-- = %d...\n", printk 1036 drivers/tty/rocket.c printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line); printk 1340 drivers/tty/rocket.c printk(KERN_INFO "throttle %s ....\n", tty->name); printk 1356 drivers/tty/rocket.c printk(KERN_INFO "unthrottle %s ....\n", tty->name); printk 1381 drivers/tty/rocket.c printk(KERN_INFO "stop %s: %d %d....\n", tty->name, printk 1397 drivers/tty/rocket.c printk(KERN_INFO "start %s: %d %d....\n", tty->name, printk 1427 drivers/tty/rocket.c printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout, printk 1429 drivers/tty/rocket.c printk(KERN_INFO "cps=%d...\n", info->cps); printk 1450 drivers/tty/rocket.c printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt, printk 1459 drivers/tty/rocket.c printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); printk 1476 drivers/tty/rocket.c printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); printk 1522 drivers/tty/rocket.c printk(KERN_INFO "rp_put_char %c...\n", ch); printk 1568 drivers/tty/rocket.c printk(KERN_INFO "rp_write %d chars...\n", count); printk 1658 drivers/tty/rocket.c printk(KERN_INFO "rp_write_room returns %d...\n", ret); printk 1675 drivers/tty/rocket.c printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt); printk 2215 drivers/tty/rocket.c printk(KERN_ERR "Unable to reserve IO region for configured " printk 2297 drivers/tty/rocket.c printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", printk 2300 drivers/tty/rocket.c printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n", printk 2343 drivers/tty/rocket.c printk(KERN_INFO "RocketPort device driver module, version %s, %s\n", printk 2363 drivers/tty/rocket.c printk(KERN_ERR "Unable to reserve IO region for first " printk 2409 drivers/tty/rocket.c printk(KERN_ERR "Couldn't install tty RocketPort driver\n"); printk 2414 drivers/tty/rocket.c printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major); printk 2437 drivers/tty/rocket.c printk(KERN_ERR "No rocketport ports found; unloading driver\n"); printk 2464 drivers/tty/rocket.c printk(KERN_ERR "Error %d while trying to unregister " printk 44 drivers/tty/rocket_int.h printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value); printk 52 drivers/tty/rocket_int.h printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value); printk 61 drivers/tty/rocket_int.h printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value); printk 485 drivers/tty/serial/21285.c printk(KERN_INFO "Serial: 21285 driver\n"); printk 51 drivers/tty/serial/8250/8250_port.c #define DEBUG_AUTOCONF(fmt...) printk(fmt) printk 826 drivers/tty/serial/amba-pl010.c printk(KERN_INFO "Serial: AMBA driver\n"); printk 2816 drivers/tty/serial/amba-pl011.c printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); printk 571 drivers/tty/serial/apbuart.c printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n", printk 653 drivers/tty/serial/apbuart.c printk(KERN_INFO "Serial: GRLIB APBUART driver\n"); printk 658 drivers/tty/serial/apbuart.c printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", printk 665 drivers/tty/serial/apbuart.c printk(KERN_ERR printk 268 drivers/tty/serial/cpm_uart/cpm_uart_core.c printk(KERN_WARNING "No room in flip buffer\n"); printk 1161 drivers/tty/serial/cpm_uart/cpm_uart_core.c printk(KERN_ERR "CPM UART %pOFn has no/invalid " printk 1170 drivers/tty/serial/cpm_uart/cpm_uart_core.c printk(KERN_ERR "CPM UART %pOFn has no/invalid " printk 1302 drivers/tty/serial/cpm_uart/cpm_uart_core.c printk(KERN_ERR "cpm_uart: console index %d too high\n", printk 74 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c printk(KERN_ERR printk 93 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c printk(KERN_ERR printk 70 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c printk(KERN_WARNING "cpm_uart[%d]: device tree references " printk 109 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c printk(KERN_ERR printk 128 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c printk(KERN_ERR printk 419 drivers/tty/serial/dz.c printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); printk 683 drivers/tty/serial/dz.c printk(KERN_ERR "dz: Cannot map MMIO\n"); printk 700 drivers/tty/serial/dz.c printk(KERN_ERR printk 934 drivers/tty/serial/dz.c printk("%s%s\n", dz_name, dz_version); printk 1041 drivers/tty/serial/ip22zilog.c printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); printk 1159 drivers/tty/serial/ip22zilog.c printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); printk 460 drivers/tty/serial/jsm/jsm_tty.c printk(KERN_INFO "jsm: linemap is full, added device failed\n"); printk 467 drivers/tty/serial/jsm/jsm_tty.c printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); printk 470 drivers/tty/serial/jsm/jsm_tty.c printk(KERN_INFO "jsm: Port %d added\n", i); printk 749 drivers/tty/serial/max3100.c printk(KERN_ERR "Couldn't register max3100 uart driver\n"); printk 399 drivers/tty/serial/mcf.c printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " printk 674 drivers/tty/serial/mcf.c printk("ColdFire internal UART serial driver\n"); printk 1235 drivers/tty/serial/mpc52xx_uart.c printk(KERN_ERR "mpc52xx_uart.c: " printk 1911 drivers/tty/serial/mpc52xx_uart.c printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); printk 1915 drivers/tty/serial/mpc52xx_uart.c printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", printk 1933 drivers/tty/serial/mpc52xx_uart.c printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", printk 456 drivers/tty/serial/mux.c printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); printk 467 drivers/tty/serial/mux.c printk(KERN_ERR "Serial mux: Unable to register driver.\n"); printk 1482 drivers/tty/serial/pmac_zilog.c printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", printk 1486 drivers/tty/serial/pmac_zilog.c printk(KERN_INFO "pmac_zilog: serial modem detected\n"); printk 1567 drivers/tty/serial/pmac_zilog.c printk(KERN_WARNING "%pOFn: Failed to request resource" printk 1606 drivers/tty/serial/pmac_zilog.c printk("HRM... pmz_suspend with NULL uap\n"); printk 1659 drivers/tty/serial/pmac_zilog.c printk(KERN_ERR "pmac_zilog: missing node %c for escc %pOF\n", printk 1872 drivers/tty/serial/pmac_zilog.c printk(KERN_INFO "%s\n", version); printk 1895 drivers/tty/serial/pmac_zilog.c printk(KERN_ERR printk 837 drivers/tty/serial/pnx8xxx_uart.c printk(KERN_INFO "Serial: PNX8XXX driver\n"); printk 673 drivers/tty/serial/sa1100.c printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); printk 700 drivers/tty/serial/sa1100.c printk(KERN_ERR "%s: bad port number %d\n", __func__, port); printk 931 drivers/tty/serial/sa1100.c printk(KERN_INFO "Serial: SA11x0 driver\n"); printk 674 drivers/tty/serial/sb1250-duart.c printk(err); printk 682 drivers/tty/serial/sb1250-duart.c printk(err); printk 699 drivers/tty/serial/sb1250-duart.c printk(err); printk 707 drivers/tty/serial/sb1250-duart.c printk(err); printk 1193 drivers/tty/serial/serial_txx9.c printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); printk 1261 drivers/tty/serial/serial_txx9.c printk(KERN_INFO "%s version %s\n", serial_name, serial_version); printk 986 drivers/tty/serial/st-asc.c printk(banner); printk 895 drivers/tty/serial/sunsab.c printk("Console: ttyS%d (SAB82532)\n", printk 673 drivers/tty/serial/sunsu.c printk("ttyS%d: LSR safety check engaged!\n", up->port.line); printk 685 drivers/tty/serial/sunsu.c printk("su: Cannot register IRQ %d\n", up->port.irq); printk 1216 drivers/tty/serial/sunsu.c printk("%pOF: %s port at %llx, irq %u\n", printk 1348 drivers/tty/serial/sunsu.c printk("Console: ttyS%d (SU)\n", printk 1230 drivers/tty/serial/sunzilog.c printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", printk 1492 drivers/tty/serial/sunzilog.c printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " printk 1497 drivers/tty/serial/sunzilog.c printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " printk 473 drivers/tty/serial/timbuart.c printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", printk 221 drivers/tty/serial/ucc_uart.c printk(KERN_ERR "%s: addr=%p\n", __func__, addr); printk 240 drivers/tty/serial/ucc_uart.c printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr); printk 1499 drivers/tty/serial/ucc_uart.c printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); printk 1501 drivers/tty/serial/ucc_uart.c printk(KERN_INFO "ucc-uart: Using loopback mode\n"); printk 1506 drivers/tty/serial/ucc_uart.c printk(KERN_ERR "ucc-uart: could not register UART driver\n"); printk 1512 drivers/tty/serial/ucc_uart.c printk(KERN_ERR printk 1522 drivers/tty/serial/ucc_uart.c printk(KERN_INFO printk 206 drivers/tty/serial/zs.c printk("W%-2d = 0x%02x\t", j, zport->regs[j]); printk 207 drivers/tty/serial/zs.c printk("\n"); printk 209 drivers/tty/serial/zs.c printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j)); printk 210 drivers/tty/serial/zs.c printk("\n\n"); printk 770 drivers/tty/serial/zs.c printk(KERN_ERR "zs: can't get irq %d\n", printk 998 drivers/tty/serial/zs.c printk(KERN_ERR "zs: Cannot map MMIO\n"); printk 1009 drivers/tty/serial/zs.c printk(KERN_ERR "zs: Unable to reserve MMIO resource\n"); printk 932 drivers/tty/synclink.c printk(badinfo, name, routine); printk 936 drivers/tty/synclink.c printk(badmagic, name, routine); printk 983 drivers/tty/synclink.c printk("mgsl_stop(%s)\n",info->device_name); printk 1006 drivers/tty/synclink.c printk("mgsl_start(%s)\n",info->device_name); printk 1061 drivers/tty/synclink.c printk( "%s(%d):mgsl_bh_handler(%s) entry\n", printk 1070 drivers/tty/synclink.c printk( "%s(%d):mgsl_bh_handler() work item action=%d\n", printk 1086 drivers/tty/synclink.c printk("Unknown work item ID=%08X!\n", action); printk 1092 drivers/tty/synclink.c printk( "%s(%d):mgsl_bh_handler(%s) exit\n", printk 1102 drivers/tty/synclink.c printk( "%s(%d):mgsl_bh_receive(%s)\n", printk 1123 drivers/tty/synclink.c printk( "%s(%d):mgsl_bh_transmit() entry on %s\n", printk 1141 drivers/tty/synclink.c printk( "%s(%d):mgsl_bh_status() entry on %s\n", printk 1164 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_receive_status status=%04X\n", printk 1216 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_transmit_status status=%04X\n", printk 1284 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_io_pin status=%04X\n", printk 1345 drivers/tty/synclink.c printk("%s CD now %s...", info->device_name, printk 1351 drivers/tty/synclink.c printk("doing serial hangup..."); printk 1362 drivers/tty/synclink.c printk("CTS tx start..."); printk 1371 drivers/tty/synclink.c printk("CTS tx stop..."); printk 1402 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n", printk 1440 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_receive_data\n", printk 1473 drivers/tty/synclink.c printk("rxerr=%04X\n",status); printk 1515 drivers/tty/synclink.c printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", printk 1536 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_misc status=%04X\n", printk 1603 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n", printk 1648 drivers/tty/synclink.c printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n", printk 1685 drivers/tty/synclink.c printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n", printk 1696 drivers/tty/synclink.c printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n", printk 1711 drivers/tty/synclink.c printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n", printk 1725 drivers/tty/synclink.c printk("%s(%d):%s queueing bh task.\n", printk 1734 drivers/tty/synclink.c printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n", printk 1752 drivers/tty/synclink.c printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name); printk 1761 drivers/tty/synclink.c printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", printk 1813 drivers/tty/synclink.c printk("%s(%d):mgsl_shutdown(%s)\n", printk 1906 drivers/tty/synclink.c printk("%s(%d):mgsl_change_params(%s)\n", printk 2007 drivers/tty/synclink.c printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n", printk 2046 drivers/tty/synclink.c printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n", printk 2057 drivers/tty/synclink.c printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n", printk 2098 drivers/tty/synclink.c printk( "%s(%d):mgsl_write(%s) count=%d\n", printk 2161 drivers/tty/synclink.c printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n", printk 2165 drivers/tty/synclink.c printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n", printk 2200 drivers/tty/synclink.c printk( "%s(%d):mgsl_write(%s) returning=%d\n", printk 2226 drivers/tty/synclink.c printk("%s(%d):mgsl_write_room(%s)=%d\n", printk 2254 drivers/tty/synclink.c printk("%s(%d):mgsl_chars_in_buffer(%s)\n", printk 2261 drivers/tty/synclink.c printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n", printk 2289 drivers/tty/synclink.c printk("%s(%d):mgsl_flush_buffer(%s) entry\n", printk 2317 drivers/tty/synclink.c printk("%s(%d):mgsl_send_xchar(%s,%d)\n", printk 2346 drivers/tty/synclink.c printk("%s(%d):mgsl_throttle(%s) entry\n", printk 2376 drivers/tty/synclink.c printk("%s(%d):mgsl_unthrottle(%s) entry\n", printk 2412 drivers/tty/synclink.c printk("%s(%d):mgsl_get_params(%s)\n", printk 2442 drivers/tty/synclink.c printk("%s(%d):mgsl_get_params(%s)\n", printk 2450 drivers/tty/synclink.c printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", printk 2477 drivers/tty/synclink.c printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__, printk 2482 drivers/tty/synclink.c printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n", printk 2513 drivers/tty/synclink.c printk("%s(%d):mgsl_get_txidle(%s)=%d\n", printk 2519 drivers/tty/synclink.c printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n", printk 2540 drivers/tty/synclink.c printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__, printk 2567 drivers/tty/synclink.c printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__, printk 2604 drivers/tty/synclink.c printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__, printk 2631 drivers/tty/synclink.c printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__, printk 2672 drivers/tty/synclink.c printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__, printk 2847 drivers/tty/synclink.c printk("%s(%d):%s tiocmget() value=%08X\n", printk 2861 drivers/tty/synclink.c printk("%s(%d):%s tiocmset(%x,%x)\n", printk 2892 drivers/tty/synclink.c printk("%s(%d):mgsl_break(%s,%d)\n", printk 2956 drivers/tty/synclink.c printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, printk 3024 drivers/tty/synclink.c printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__, printk 3075 drivers/tty/synclink.c printk("%s(%d):mgsl_close(%s) entry, count=%d\n", printk 3093 drivers/tty/synclink.c printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, printk 3118 drivers/tty/synclink.c printk("%s(%d):mgsl_wait_until_sent(%s) entry\n", printk 3167 drivers/tty/synclink.c printk("%s(%d):mgsl_wait_until_sent(%s) exit\n", printk 3185 drivers/tty/synclink.c printk("%s(%d):mgsl_hangup(%s)\n", printk 3258 drivers/tty/synclink.c printk("%s(%d):block_til_ready on %s\n", printk 3281 drivers/tty/synclink.c printk("%s(%d):block_til_ready before block on %s count=%d\n", printk 3311 drivers/tty/synclink.c printk("%s(%d):block_til_ready blocking on %s count=%d\n", printk 3328 drivers/tty/synclink.c printk("%s(%d):block_til_ready after blocking on %s count=%d\n", printk 3345 drivers/tty/synclink.c printk("%s(%d):mgsl_open with invalid line #%d.\n", printk 3380 drivers/tty/synclink.c printk("%s(%d):mgsl_open(%s), old ref count = %d\n", printk 3404 drivers/tty/synclink.c printk("%s(%d):block_til_ready(%s) returned %d\n", printk 3410 drivers/tty/synclink.c printk("%s(%d):mgsl_open(%s) success\n", printk 3609 drivers/tty/synclink.c printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n", printk 3617 drivers/tty/synclink.c printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__); printk 3900 drivers/tty/synclink.c printk("%s %s(%d) allocating %d tx holding buffers\n", printk 4029 drivers/tty/synclink.c printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n", printk 4037 drivers/tty/synclink.c printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n", printk 4045 drivers/tty/synclink.c printk( "%s(%d):mem addr conflict device %s Addr=%08X\n", printk 4051 drivers/tty/synclink.c printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n", printk 4060 drivers/tty/synclink.c printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n", printk 4066 drivers/tty/synclink.c printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n", printk 4074 drivers/tty/synclink.c printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n", printk 4084 drivers/tty/synclink.c printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n", printk 4096 drivers/tty/synclink.c printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n", printk 4111 drivers/tty/synclink.c printk( "%s(%d):mgsl_release_resources(%s) entry\n", printk 4149 drivers/tty/synclink.c printk( "%s(%d):mgsl_release_resources(%s) exit\n", printk 4204 drivers/tty/synclink.c printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", printk 4209 drivers/tty/synclink.c printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n", printk 4241 drivers/tty/synclink.c printk("Error can't allocate device instance data\n"); printk 4315 drivers/tty/synclink.c printk("%s(%d):Couldn't register serial driver\n", printk 4322 drivers/tty/synclink.c printk("%s %s, tty major#%d\n", printk 4334 drivers/tty/synclink.c printk("Unloading %s: %s\n", driver_name, driver_version); printk 4339 drivers/tty/synclink.c printk("%s(%d) failed to unregister tty driver err=%d\n", printk 4369 drivers/tty/synclink.c printk("%s %s\n", driver_name, driver_version); printk 4372 drivers/tty/synclink.c printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); printk 5397 drivers/tty/synclink.c printk("%s(%d):usc_stop_receiver(%s)\n", printk 5432 drivers/tty/synclink.c printk("%s(%d):usc_start_receiver(%s)\n", printk 5497 drivers/tty/synclink.c printk("%s(%d):usc_start_transmitter(%s)\n", printk 5600 drivers/tty/synclink.c printk("%s(%d):usc_stop_transmitter(%s)\n", printk 6524 drivers/tty/synclink.c printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n", printk 6568 drivers/tty/synclink.c printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n", printk 6735 drivers/tty/synclink.c printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n", printk 7270 drivers/tty/synclink.c printk( "%s(%d):Testing device %s\n", printk 7275 drivers/tty/synclink.c printk( "%s(%d):Register test failure for device %s Addr=%04X\n", printk 7282 drivers/tty/synclink.c printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", printk 7289 drivers/tty/synclink.c printk( "%s(%d):DMA test failure for device %s DMA=%d\n", printk 7295 drivers/tty/synclink.c printk( "%s(%d):device %s passed diagnostics\n", printk 7417 drivers/tty/synclink.c printk("%s tx data:\n",info->device_name); printk 7419 drivers/tty/synclink.c printk("%s rx data:\n",info->device_name); printk 7428 drivers/tty/synclink.c printk("%02X ",(unsigned char)data[i]); printk 7430 drivers/tty/synclink.c printk(" "); printk 7433 drivers/tty/synclink.c printk("%c",data[i]); printk 7435 drivers/tty/synclink.c printk("."); printk 7437 drivers/tty/synclink.c printk("\n"); printk 7458 drivers/tty/synclink.c printk( "%s(%d):mgsl_tx_timeout(%s)\n", printk 7614 drivers/tty/synclink.c printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); printk 7657 drivers/tty/synclink.c printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); printk 7667 drivers/tty/synclink.c printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); printk 7715 drivers/tty/synclink.c printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); printk 7749 drivers/tty/synclink.c printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); printk 7846 drivers/tty/synclink.c printk("hdlcdev_tx_timeout(%s)\n",dev->name); printk 7884 drivers/tty/synclink.c printk("hdlcdev_rx(%s)\n", dev->name); printk 7887 drivers/tty/synclink.c printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", printk 7929 drivers/tty/synclink.c printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); printk 7951 drivers/tty/synclink.c printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); printk 7982 drivers/tty/synclink.c printk("error enabling pci device %p\n", dev); printk 7988 drivers/tty/synclink.c printk("can't allocate device instance data.\n"); printk 37 drivers/tty/synclink_gt.c #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt printk 38 drivers/tty/synclink_gt.c #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt printk 39 drivers/tty/synclink_gt.c #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt printk 40 drivers/tty/synclink_gt.c #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt printk 555 drivers/tty/synclink_gt.c printk("%s %s data:\n",info->device_name, label); printk 559 drivers/tty/synclink_gt.c printk("%02X ",(unsigned char)data[i]); printk 561 drivers/tty/synclink_gt.c printk(" "); printk 564 drivers/tty/synclink_gt.c printk("%c",data[i]); printk 566 drivers/tty/synclink_gt.c printk("."); printk 568 drivers/tty/synclink_gt.c printk("\n"); printk 581 drivers/tty/synclink_gt.c printk("tbuf_current=%d\n", info->tbuf_current); printk 583 drivers/tty/synclink_gt.c printk("%d: count=%04X status=%04X\n", printk 595 drivers/tty/synclink_gt.c printk("rbuf_current=%d\n", info->rbuf_current); printk 597 drivers/tty/synclink_gt.c printk("%d: count=%04X status=%04X\n", printk 609 drivers/tty/synclink_gt.c printk("null struct slgt_info for (%s) in %s\n", devname, name); printk 613 drivers/tty/synclink_gt.c printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); printk 1771 drivers/tty/synclink_gt.c printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); printk 1793 drivers/tty/synclink_gt.c printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); printk 3534 drivers/tty/synclink_gt.c printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", printk 3667 drivers/tty/synclink_gt.c printk("error enabling pci device %p\n", dev); printk 3711 drivers/tty/synclink_gt.c printk(KERN_INFO "unload %s\n", driver_name); printk 3756 drivers/tty/synclink_gt.c printk(KERN_INFO "%s\n", driver_name); printk 3760 drivers/tty/synclink_gt.c printk("%s can't allocate tty driver\n", driver_name); printk 3786 drivers/tty/synclink_gt.c printk(KERN_INFO "%s, tty major#%d\n", printk 3791 drivers/tty/synclink_gt.c printk("%s pci_register_driver error=%d\n", driver_name, rc); printk 3797 drivers/tty/synclink_gt.c printk("%s no devices found\n",driver_name); printk 5079 drivers/tty/synclink_gt.c printk("register test failure %s addr=%08X\n", printk 5082 drivers/tty/synclink_gt.c printk("IRQ test failure %s IRQ=%d\n", printk 5085 drivers/tty/synclink_gt.c printk("loopback test failure %s\n", info->device_name); printk 674 drivers/tty/synclinkmp.c printk(badinfo, name, routine); printk 678 drivers/tty/synclinkmp.c printk(badmagic, name, routine); printk 719 drivers/tty/synclinkmp.c printk("%s(%d): open with invalid line #%d.\n", printk 730 drivers/tty/synclinkmp.c printk("%s(%d):%s device is not allocated, init error=%d\n", printk 752 drivers/tty/synclinkmp.c printk("%s(%d):%s open(), old ref count = %d\n", printk 776 drivers/tty/synclinkmp.c printk("%s(%d):%s block_til_ready() returned %d\n", printk 782 drivers/tty/synclinkmp.c printk("%s(%d):%s open() success\n", printk 808 drivers/tty/synclinkmp.c printk("%s(%d):%s close() entry, count=%d\n", printk 827 drivers/tty/synclinkmp.c printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, printk 840 drivers/tty/synclinkmp.c printk("%s(%d):%s hangup()\n", printk 868 drivers/tty/synclinkmp.c printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, printk 916 drivers/tty/synclinkmp.c printk("%s(%d):%s write() count=%d\n", printk 981 drivers/tty/synclinkmp.c printk( "%s(%d):%s write() returning=%d\n", printk 995 drivers/tty/synclinkmp.c printk( "%s(%d):%s put_char(%d)\n", printk 1031 drivers/tty/synclinkmp.c printk("%s(%d):%s send_xchar(%d)\n", printk 1058 drivers/tty/synclinkmp.c printk("%s(%d):%s wait_until_sent() entry\n", printk 1109 drivers/tty/synclinkmp.c printk("%s(%d):%s wait_until_sent() exit\n", printk 1132 drivers/tty/synclinkmp.c printk("%s(%d):%s write_room()=%d\n", printk 1146 drivers/tty/synclinkmp.c printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", printk 1157 drivers/tty/synclinkmp.c printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", printk 1185 drivers/tty/synclinkmp.c printk("%s(%d):%s flush_buffer() entry\n", printk 1210 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_hold()\n", printk 1230 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_release()\n", printk 1256 drivers/tty/synclinkmp.c printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, printk 1433 drivers/tty/synclinkmp.c printk("%s(%d):%s chars_in_buffer()=%d\n", printk 1447 drivers/tty/synclinkmp.c printk("%s(%d):%s throttle() entry\n", printk 1472 drivers/tty/synclinkmp.c printk("%s(%d):%s unthrottle() entry\n", printk 1503 drivers/tty/synclinkmp.c printk("%s(%d):%s set_break(%d)\n", printk 1584 drivers/tty/synclinkmp.c printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); printk 1627 drivers/tty/synclinkmp.c printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); printk 1637 drivers/tty/synclinkmp.c printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); printk 1685 drivers/tty/synclinkmp.c printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); printk 1719 drivers/tty/synclinkmp.c printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); printk 1816 drivers/tty/synclinkmp.c printk("hdlcdev_tx_timeout(%s)\n",dev->name); printk 1854 drivers/tty/synclinkmp.c printk("hdlcdev_rx(%s)\n",dev->name); printk 1857 drivers/tty/synclinkmp.c printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", printk 1899 drivers/tty/synclinkmp.c printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); printk 1921 drivers/tty/synclinkmp.c printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); printk 1986 drivers/tty/synclinkmp.c printk( "%s(%d):%s bh_handler() entry\n", printk 1995 drivers/tty/synclinkmp.c printk( "%s(%d):%s bh_handler() work item action=%d\n", printk 2011 drivers/tty/synclinkmp.c printk("%s(%d):%s Unknown work item ID=%08X!\n", printk 2018 drivers/tty/synclinkmp.c printk( "%s(%d):%s bh_handler() exit\n", printk 2025 drivers/tty/synclinkmp.c printk( "%s(%d):%s bh_receive()\n", printk 2036 drivers/tty/synclinkmp.c printk( "%s(%d):%s bh_transmit() entry\n", printk 2046 drivers/tty/synclinkmp.c printk( "%s(%d):%s bh_status() entry\n", printk 2077 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_timer()\n", printk 2096 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_rxint status=%02X %02x\n", printk 2145 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_rxrdy\n", printk 2157 drivers/tty/synclinkmp.c printk("%s(%d):%s rxerr=%04X\n", printk 2193 drivers/tty/synclinkmp.c printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", printk 2205 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_txeom status=%02x\n", printk 2270 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_txint status=%02x\n", printk 2293 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_txrdy() tx_count=%d\n", printk 2332 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", printk 2349 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", printk 2365 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_txdmaok(), status=%02x\n", printk 2385 drivers/tty/synclinkmp.c printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", printk 2396 drivers/tty/synclinkmp.c printk("%s(%d):isr_io_pin status=%04X\n", printk 2454 drivers/tty/synclinkmp.c printk("%s CD now %s...", info->device_name, printk 2460 drivers/tty/synclinkmp.c printk("doing serial hangup..."); printk 2472 drivers/tty/synclinkmp.c printk("CTS tx start..."); printk 2481 drivers/tty/synclinkmp.c printk("CTS tx stop..."); printk 2511 drivers/tty/synclinkmp.c printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", printk 2525 drivers/tty/synclinkmp.c printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", printk 2537 drivers/tty/synclinkmp.c printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", printk 2602 drivers/tty/synclinkmp.c printk("%s(%d):%s queueing bh task.\n", printk 2612 drivers/tty/synclinkmp.c printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", printk 2622 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); printk 2630 drivers/tty/synclinkmp.c printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", printk 2665 drivers/tty/synclinkmp.c printk("%s(%d):%s synclinkmp_shutdown()\n", printk 2741 drivers/tty/synclinkmp.c printk("%s(%d):%s change_params()\n", printk 2830 drivers/tty/synclinkmp.c printk("%s(%d):%s get_params()\n", printk 2850 drivers/tty/synclinkmp.c printk("%s(%d):%s get_params()\n", printk 2858 drivers/tty/synclinkmp.c printk( "%s(%d):%s get_params() user buffer copy failed\n", printk 2873 drivers/tty/synclinkmp.c printk("%s(%d):%s set_params\n", printk 2878 drivers/tty/synclinkmp.c printk( "%s(%d):%s set_params() user buffer copy failed\n", printk 2899 drivers/tty/synclinkmp.c printk("%s(%d):%s get_txidle()=%d\n", printk 2905 drivers/tty/synclinkmp.c printk( "%s(%d):%s get_txidle() user buffer copy failed\n", printk 2918 drivers/tty/synclinkmp.c printk("%s(%d):%s set_txidle(%d)\n", printk 2933 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_enable(%d)\n", printk 2956 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_abort()\n", printk 2980 drivers/tty/synclinkmp.c printk("%s(%d):%s rx_enable(%d)\n", printk 3014 drivers/tty/synclinkmp.c printk("%s(%d):%s wait_mgsl_event(%d)\n", printk 3191 drivers/tty/synclinkmp.c printk("%s(%d):%s tiocmget() value=%08X\n", printk 3205 drivers/tty/synclinkmp.c printk("%s(%d):%s tiocmset(%x,%x)\n", printk 3263 drivers/tty/synclinkmp.c printk("%s(%d):%s block_til_ready()\n", printk 3287 drivers/tty/synclinkmp.c printk("%s(%d):%s block_til_ready() before block, count=%d\n", printk 3317 drivers/tty/synclinkmp.c printk("%s(%d):%s block_til_ready() count=%d\n", printk 3332 drivers/tty/synclinkmp.c printk("%s(%d):%s block_til_ready() after, count=%d\n", printk 3389 drivers/tty/synclinkmp.c printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", printk 3403 drivers/tty/synclinkmp.c printk("%s(%d):%s Can't allocate DMA buffer memory\n", printk 3527 drivers/tty/synclinkmp.c printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", printk 3536 drivers/tty/synclinkmp.c printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", printk 3545 drivers/tty/synclinkmp.c printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", printk 3554 drivers/tty/synclinkmp.c printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", printk 3565 drivers/tty/synclinkmp.c printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n", printk 3573 drivers/tty/synclinkmp.c printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n", printk 3582 drivers/tty/synclinkmp.c printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n", printk 3592 drivers/tty/synclinkmp.c printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n", printk 3600 drivers/tty/synclinkmp.c printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", printk 3616 drivers/tty/synclinkmp.c printk( "%s(%d):%s release_resources() entry\n", printk 3662 drivers/tty/synclinkmp.c printk( "%s(%d):%s release_resources() exit\n", printk 3696 drivers/tty/synclinkmp.c printk( "SyncLink MultiPort %s: " printk 3730 drivers/tty/synclinkmp.c printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", printk 3845 drivers/tty/synclinkmp.c printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n", printk 3898 drivers/tty/synclinkmp.c printk("Unloading %s %s\n", driver_name, driver_version); printk 3903 drivers/tty/synclinkmp.c printk("%s(%d) failed to unregister tty driver err=%d\n", printk 3949 drivers/tty/synclinkmp.c printk("%s %s\n", driver_name, driver_version); printk 3952 drivers/tty/synclinkmp.c printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); printk 3978 drivers/tty/synclinkmp.c printk("%s(%d):Couldn't register serial driver\n", printk 3985 drivers/tty/synclinkmp.c printk("%s %s, tty major#%d\n", printk 4104 drivers/tty/synclinkmp.c printk("%s(%d):%s rx_stop()\n", printk 4127 drivers/tty/synclinkmp.c printk("%s(%d):%s rx_start()\n", printk 4182 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_start() tx_count=%d\n", printk 4252 drivers/tty/synclinkmp.c printk("%s(%d):%s tx_stop()\n", printk 4931 drivers/tty/synclinkmp.c printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", printk 5292 drivers/tty/synclinkmp.c printk( "%s(%d):Testing device %s\n", printk 5311 drivers/tty/synclinkmp.c printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", printk 5320 drivers/tty/synclinkmp.c printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", printk 5329 drivers/tty/synclinkmp.c printk( "%s(%d):DMA test failure for device %s\n", printk 5335 drivers/tty/synclinkmp.c printk( "%s(%d):device %s passed diagnostics\n", printk 5426 drivers/tty/synclinkmp.c printk("%s tx data:\n",info->device_name); printk 5428 drivers/tty/synclinkmp.c printk("%s rx data:\n",info->device_name); printk 5437 drivers/tty/synclinkmp.c printk("%02X ",(unsigned char)data[i]); printk 5439 drivers/tty/synclinkmp.c printk(" "); printk 5442 drivers/tty/synclinkmp.c printk("%c",data[i]); printk 5444 drivers/tty/synclinkmp.c printk("."); printk 5446 drivers/tty/synclinkmp.c printk("\n"); printk 5462 drivers/tty/synclinkmp.c printk( "%s(%d):%s tx_timeout()\n", printk 5574 drivers/tty/synclinkmp.c printk("error enabling pci device %p\n", dev); printk 317 drivers/tty/vt/selection.c printk(KERN_WARNING "selection: kmalloc() failed\n"); printk 880 drivers/uio/uio.c printk(KERN_ERR "class_register failed for uio\n"); printk 814 drivers/usb/atm/cxacru.c printk(KERN_INFO "%s%d: %s %pM\n", atm_dev->type, atm_dev->number, printk 624 drivers/usb/atm/speedtch.c printk(" %02x", instance->int_data[i]); printk 625 drivers/usb/atm/speedtch.c printk("\n"); printk 1279 drivers/usb/atm/usbatm.c printk(KERN_ERR "%s unusable with this kernel!\n", usbatm_driver_name); printk 40 drivers/usb/atm/usbatm.h printk(level "ATM dev %d: " format , \ printk 182 drivers/usb/atm/xusbatm.c printk(KERN_WARNING "xusbatm: malformed module parameters\n"); printk 2014 drivers/usb/class/cdc-acm.c printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); printk 299 drivers/usb/class/usblp.c printk(KERN_WARNING "usblp%d: " printk 323 drivers/usb/class/usblp.c printk(KERN_WARNING "usblp%d: " printk 370 drivers/usb/class/usblp.c printk(KERN_INFO "usblp%d: %s\n", printk 443 drivers/usb/class/usblp.c printk(KERN_INFO "usblp%d: removed\n", usblp->minor); printk 830 drivers/usb/class/usblp.c printk(KERN_ERR "usblp%d: error %d reading from printer\n", printk 1272 drivers/usb/class/usblp.c printk(KERN_INFO "usblp%d: Disabling reads from " printk 1314 drivers/usb/class/usblp.c printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", printk 2799 drivers/usb/core/devio.c printk(KERN_ERR "Unable to register minors for usb_device\n"); printk 2805 drivers/usb/core/devio.c printk(KERN_ERR "Unable to get usb_device major %d\n", printk 903 drivers/usb/core/driver.c printk(KERN_ERR "%s: error %d registering device " printk 979 drivers/usb/core/driver.c printk(KERN_ERR "%s: error %d registering interface " printk 94 drivers/usb/core/file.c printk(KERN_ERR "class_create failed for usb devices\n"); printk 126 drivers/usb/core/file.c printk(KERN_ERR "Unable to get major %d for usb devices\n", printk 2985 drivers/usb/core/hcd.c printk(KERN_ERR "USB: monitor was not registered\n"); printk 5548 drivers/usb/core/hub.c printk(KERN_ERR "%s: can't register hub driver\n", printk 451 drivers/usb/core/sysfs.c printk(KERN_WARNING "WARNING! power/level is deprecated; " printk 245 drivers/usb/core/usb.c printk(KERN_DEBUG "Did not find alt setting %u for intf %u, " printk 862 drivers/usb/core/usb.c printk(KERN_ERR printk 75 drivers/usb/early/ehci-dbgp.c #define dbgp_printk printk printk 114 drivers/usb/gadget/function/u_ether.c printk(level "%s: " fmt , (d)->net->name , ## args) printk 52 drivers/usb/gadget/function/uvc.h printk(KERN_DEBUG "uvcvideo: " msg); \ printk 77 drivers/usb/gadget/legacy/dbgp.c printk(KERN_NOTICE "%s%c", buf, c); printk 239 drivers/usb/gadget/legacy/inode.c printk(level "%s: " fmt , shortname , ## args) printk 1477 drivers/usb/gadget/udc/fsl_udc_core.c printk(KERN_INFO "udc: switch to test mode %d.\n", ptc); printk 1958 drivers/usb/gadget/udc/fsl_udc_core.c printk(KERN_INFO "Suspend udc for OTG auto detect\n"); printk 512 drivers/usb/gadget/udc/fsl_usb2_udc.h #define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ printk 538 drivers/usb/gadget/udc/fsl_usb2_udc.h printk(KERN_DEBUG "%6x: %s\n", start, line); printk 355 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 362 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 367 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 372 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 393 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); printk 405 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG "%s : req->req.length = 0x%x\n", printk 568 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 579 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 584 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 590 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG " 0x%x\n", data); printk 613 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG "req->req.actual > req->req.length\n"); printk 652 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "sync fifo is not empty!\n"); printk 680 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_DEBUG "request error!!\n"); printk 1002 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK)); printk 1079 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO"fusb300_warmreset\n"); printk 1086 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO"fusb300_hotreset\n"); printk 1100 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO"fusb300_ep0abt\n"); printk 1106 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO"fusb300_vbus_change\n"); printk 1137 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n"); printk 1143 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n"); printk 1149 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n"); printk 1155 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n"); printk 1163 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n"); printk 1169 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n"); printk 1175 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_resume\n"); printk 1181 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_suspend\n"); printk 1187 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_HS_LPM_INT\n"); printk 1198 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_ep0fail\n"); printk 1202 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_ep0setup\n"); printk 1212 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_cmdend\n"); printk 1216 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_cxout\n"); printk 1221 drivers/usb/gadget/udc/fusb300_udc.c printk(KERN_INFO "fusb300_cxin\n"); printk 1748 drivers/usb/gadget/udc/goku_udc.c printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev)); printk 265 drivers/usb/gadget/udc/goku_udc.h printk(level "%s %s: " fmt , driver_name , \ printk 250 drivers/usb/gadget/udc/r8a66597-udc.h printk(KERN_ERR "r8a66597: platdata clock is wrong.\n"); printk 123 drivers/usb/host/bcma-hcd.c printk(KERN_EMERG "Failed to enable misc PPL!\n"); printk 150 drivers/usb/host/bcma-hcd.c printk(KERN_EMERG printk 1296 drivers/usb/host/ehci-hcd.c printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); printk 1300 drivers/usb/host/ehci-hcd.c printk(KERN_WARNING "Warning! ehci_hcd should always be loaded" printk 1833 drivers/usb/host/imx21-hcd.c printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc); printk 337 drivers/usb/host/isp116x.h #define ERR(stuff...) printk(KERN_ERR "116x: " stuff) printk 338 drivers/usb/host/isp116x.h #define WARNING(stuff...) printk(KERN_WARNING "116x: " stuff) printk 339 drivers/usb/host/isp116x.h #define INFO(stuff...) printk(KERN_INFO "116x: " stuff) printk 556 drivers/usb/host/isp116x.h printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d %x %x%x%x\n", printk 569 drivers/usb/host/isp116x.h printk(KERN_WARNING "-> "); printk 571 drivers/usb/host/isp116x.h printk("%02x ", ((u8 *) buf)[k]); printk 572 drivers/usb/host/isp116x.h printk("\n"); printk 581 drivers/usb/host/isp116x.h printk(KERN_WARNING "<- "); printk 583 drivers/usb/host/isp116x.h printk("%02x ", ((u8 *) buf)[k]); printk 584 drivers/usb/host/isp116x.h printk("\n"); printk 587 drivers/usb/host/isp116x.h printk(KERN_WARNING "-\n"); printk 898 drivers/usb/host/isp1362.h printk(" %02x", ((u8 *) buf)[k]); printk 903 drivers/usb/host/isp1362.h printk("\n"); printk 908 drivers/usb/host/isp1362.h printk(" "); printk 910 drivers/usb/host/isp1362.h printk(" "); printk 913 drivers/usb/host/isp1362.h printk("\n"); printk 1277 drivers/usb/host/ohci-hcd.c printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); printk 94 drivers/usb/host/ohci-nxp.c printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", printk 96 drivers/usb/host/ohci-nxp.c printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n", printk 98 drivers/usb/host/ohci-nxp.c printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n", printk 161 drivers/usb/host/ohci-pxa27x.c printk( KERN_ERR printk 48 drivers/usb/host/ohci-sa1111.c printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label, printk 262 drivers/usb/host/pci-quirks.c printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); printk 89 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: reg access fail.\n"); printk 99 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: reg access fail.\n"); printk 113 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: reg access fail.\n"); printk 253 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: Illegal root port number.\n"); printk 274 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: unknown speed\n"); printk 443 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: register%lx, loop %x " printk 684 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: Illegal type\n"); printk 714 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: Illegal type\n"); printk 733 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum); printk 749 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum); printk 1221 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: invalid type.\n"); printk 1326 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: in fifo not ready (%d)\n", pipenum); printk 1401 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: out fifo not ready (%d)\n", pipenum); printk 2050 drivers/usb/host/r8a66597-hcd.c printk(KERN_ERR "r8a66597: get_r8a66597_device fail.(%d)\n", addr); printk 313 drivers/usb/host/r8a66597.h printk(KERN_ERR "r8a66597: platdata clock is wrong.\n"); printk 38 drivers/usb/host/sl811_cs.c #define INFO(args...) printk(KERN_INFO "sl811_cs: " args) printk 170 drivers/usb/host/sl811_cs.c printk(KERN_WARNING "sl811_cs_config failed\n"); printk 2240 drivers/usb/host/u132-hcd.c printk(KERN_ERR "invalid context for function that might sleep\n"); printk 2992 drivers/usb/host/u132-hcd.c printk(KERN_INFO "removing device u132.%d\n", printk 3083 drivers/usb/host/u132-hcd.c printk(KERN_ERR "failed to create the usb hcd struct for U132\n" printk 3201 drivers/usb/host/u132-hcd.c printk(KERN_INFO "driver %s\n", hcd_name); printk 3225 drivers/usb/host/u132-hcd.c printk(KERN_INFO "u132-hcd driver deregistered\n"); printk 36 drivers/usb/host/uhci-debug.c printk(KERN_DEBUG "%s\n", buf); printk 120 drivers/usb/host/uhci-grlib.c printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__); printk 872 drivers/usb/host/uhci-hcd.c printk(KERN_INFO "uhci_hcd: " DRIVER_DESC "%s\n", printk 350 drivers/usb/image/mdc800.c printk(KERN_WARNING "mdc800: Camera gets disconnected " printk 695 drivers/usb/image/mdc800.c printk(KERN_WARNING "mdc800: Illegal State \"working\"" printk 1027 drivers/usb/image/mdc800.c printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" printk 1038 drivers/usb/image/mdc800.c printk(KERN_ERR "mdc800: can't alloc memory!\n"); printk 170 drivers/usb/image/microtek.c printk( KERN_WARNING MTS_NAME x ) printk 172 drivers/usb/image/microtek.c printk( KERN_ERR MTS_NAME x ) printk 176 drivers/usb/image/microtek.c printk( KERN_INFO MTS_NAME x ) printk 181 drivers/usb/image/microtek.c printk( KERN_DEBUG MTS_NAME x ) printk 43 drivers/usb/isp1760/isp1760-if.c printk(KERN_ERR "memory length for this resource is wrong\n"); printk 48 drivers/usb/isp1760/isp1760-if.c printk(KERN_ERR "host controller already in use\n"); printk 55 drivers/usb/isp1760/isp1760-if.c printk(KERN_ERR "Error ioremap failed\n"); printk 100 drivers/usb/isp1760/isp1760-if.c printk(KERN_ERR "request region #1\n"); printk 106 drivers/usb/isp1760/isp1760-if.c printk(KERN_ERR "ioremap #1\n"); printk 163 drivers/usb/isp1760/isp1760-if.c printk(KERN_ERR "ips1761_pci_shutdown\n"); printk 299 drivers/usb/misc/appledisplay.c printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n"); printk 337 drivers/usb/misc/appledisplay.c printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n"); printk 48 drivers/usb/misc/isight_firmware.c printk(KERN_ERR "Unable to load isight firmware\n"); printk 59 drivers/usb/misc/isight_firmware.c printk(KERN_ERR printk 80 drivers/usb/misc/isight_firmware.c printk(KERN_ERR printk 92 drivers/usb/misc/isight_firmware.c printk(KERN_ERR printk 105 drivers/usb/misc/isight_firmware.c printk(KERN_ERR "isight firmware loading completion failed\n"); printk 313 drivers/usb/misc/ldusb.c printk(KERN_ERR "%s - error, can't find device for minor %d\n", printk 461 drivers/usb/misc/ldusb.c printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval); printk 546 drivers/usb/misc/ldusb.c printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval); printk 218 drivers/usb/misc/uss720.c printk(KERN_WARNING "get_1284_register: " printk 223 drivers/usb/misc/uss720.c printk(KERN_WARNING "get_1284_register timeout\n"); printk 513 drivers/usb/misc/uss720.c printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buf, length, rlen); printk 574 drivers/usb/misc/uss720.c printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buffer, len, rlen); printk 592 drivers/usb/misc/uss720.c printk(KERN_ERR "uss720: recvbulk ep 2 buf %p len %zu rlen %u\n", buffer, len, rlen); printk 625 drivers/usb/misc/uss720.c printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buffer, len, rlen); printk 715 drivers/usb/misc/uss720.c printk(KERN_WARNING "uss720: could not register parport\n"); printk 805 drivers/usb/misc/uss720.c printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); printk 806 drivers/usb/misc/uss720.c printk(KERN_INFO KBUILD_MODNAME ": NOTE: this is a special purpose " printk 808 drivers/usb/misc/uss720.c printk(KERN_INFO KBUILD_MODNAME ": protocols (eg. bitbang) over " printk 810 drivers/usb/misc/uss720.c printk(KERN_INFO KBUILD_MODNAME ": If you just want to connect to a " printk 363 drivers/usb/misc/yurex.c printk(KERN_ERR "%s - error, can't find device for minor %d", printk 687 drivers/usb/mon/mon_bin.c printk(KERN_ERR TAG ": consistency error on open\n"); printk 786 drivers/usb/mon/mon_bin.c printk(KERN_ERR TAG ": consistency error on close\n"); printk 363 drivers/usb/mon/mon_main.c printk(KERN_NOTICE TAG ": unable to register with the core\n"); printk 410 drivers/usb/mon/mon_main.c printk(KERN_ERR TAG printk 654 drivers/usb/mon/mon_text.c printk(KERN_ERR TAG ": consistency error on close\n"); printk 96 drivers/usb/musb/davinci.c printk(KERN_WARNING "%s %s: dma not reactivated\n", printk 14 drivers/usb/musb/musb_debug.h do { printk(facility "%s %d: " format , \ printk 793 drivers/usb/musb/musb_gadget_ep0.c printk(KERN_NOTICE "%s: peripheral reset " printk 959 drivers/usb/musb/tusb6010.c printk(KERN_WARNING "%s %s: dma not reactivated\n", printk 983 drivers/usb/musb/tusb6010.c printk(KERN_WARNING "%s %s: dma still active\n", printk 1030 drivers/usb/musb/tusb6010.c printk(KERN_ERR "tusb: Cannot enable TUSB6010\n"); printk 1038 drivers/usb/musb/tusb6010.c printk(KERN_ERR "tusb: Unable to detect TUSB6010\n"); printk 1045 drivers/usb/musb/tusb6010.c printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n", printk 1131 drivers/usb/musb/tusb6010.c printk(KERN_ERR "Could not start tusb6010 (%d)\n", printk 86 drivers/usb/musb/tusb6010_omap.c printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n", printk 128 drivers/usb/phy/phy-isp1301-omap.c printk(KERN_NOTICE "OTG device not responding.\n"); printk 732 drivers/usb/phy/phy-isp1301-omap.c printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n", printk 750 drivers/usb/phy/phy-isp1301-omap.c printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n", printk 626 drivers/usb/storage/alauda.c printk(KERN_WARNING printk 647 drivers/usb/storage/alauda.c printk(KERN_WARNING printk 654 drivers/usb/storage/alauda.c printk(KERN_WARNING printk 824 drivers/usb/storage/alauda.c printk(KERN_WARNING printk 831 drivers/usb/storage/alauda.c printk(KERN_WARNING printk 1960 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "MS_CardInit start\n"); printk 2067 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "MS_CardInit end\n"); printk 2079 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "transport --- ENE_MSInit\n"); printk 2085 drivers/usb/storage/ene_ub6250.c printk(KERN_ERR "Load MS Init Code Fail !!\n"); printk 2098 drivers/usb/storage/ene_ub6250.c printk(KERN_ERR "Execution MS Init Code Fail !!\n"); printk 2105 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert); printk 2106 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "Ready = %x\n", info->MS_Status.Ready); printk 2107 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "IsMSPro = %x\n", info->MS_Status.IsMSPro); printk 2108 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG); printk 2109 drivers/usb/storage/ene_ub6250.c printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP); printk 483 drivers/usb/storage/freecom.c printk (KERN_CRIT "freecom reset called\n"); printk 373 drivers/usb/storage/scsiglue.c printk(KERN_ERR "usb-storage: Error in %s: us->srb = %p\n", printk 871 drivers/usb/storage/sddr09.c printk(KERN_WARNING printk 884 drivers/usb/storage/sddr09.c printk(KERN_WARNING "sddr09: avoid writing to pba 1\n"); printk 1149 drivers/usb/storage/sddr09.c printk(KERN_WARNING "sddr09: could not read card info\n"); printk 1191 drivers/usb/storage/sddr09.c printk(KERN_WARNING "%s\n", blurbtxt); printk 1239 drivers/usb/storage/sddr09.c printk(KERN_WARNING "sddr09_read_map: out of memory\n"); printk 1279 drivers/usb/storage/sddr09.c printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n", printk 1293 drivers/usb/storage/sddr09.c printk(KERN_WARNING printk 1304 drivers/usb/storage/sddr09.c printk(KERN_WARNING printk 1314 drivers/usb/storage/sddr09.c printk(KERN_WARNING printk 1334 drivers/usb/storage/sddr09.c printk(KERN_WARNING printk 1343 drivers/usb/storage/sddr09.c printk(KERN_WARNING printk 1477 drivers/usb/storage/sddr09.c printk(" %02X", data[j]); printk 1478 drivers/usb/storage/sddr09.c printk("\n"); printk 490 drivers/usb/storage/sddr55.c printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n", printk 744 drivers/usb/storage/sddr55.c printk(KERN_WARNING printk 286 drivers/vhost/test.c printk(KERN_ERR "1\n"); printk 289 drivers/vhost/test.c printk(KERN_ERR "2\n"); printk 292 drivers/vhost/test.c printk(KERN_ERR "3\n"); printk 26 drivers/vhost/vringh.c printk(KERN_NOTICE "vringh:"); printk 338 drivers/video/console/mdacon.c printk("mdacon: MDA card not detected.\n"); printk 349 drivers/video/console/mdacon.c printk("mdacon: %s with %ldK of memory detected.\n", printk 239 drivers/video/console/newport_con.c printk("NG1: Screensize %dx%d\n", newport_xsize, newport_ysize); printk 282 drivers/video/console/newport_con.c printk printk 357 drivers/video/console/sticon.c printk(KERN_INFO "sticon: Initializing STI text console.\n"); printk 451 drivers/video/console/sticore.c printk (KERN_WARNING printk 482 drivers/video/console/sticore.c printk(KERN_WARNING "%s: *future ptr (0x%8x) not yet supported !\n", printk 583 drivers/video/console/sticore.c printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", printk 750 drivers/video/console/sticore.c printk(KERN_ERR "No font found for STI at %08lx\n", address); printk 807 drivers/video/console/sticore.c printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n"); printk 808 drivers/video/console/sticore.c printk(KERN_ERR "Please see http://parisc-linux.org/faq/" printk 826 drivers/video/console/sticore.c printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); printk 852 drivers/video/console/sticore.c printk(KERN_WARNING printk 987 drivers/video/console/sticore.c printk(KERN_INFO "STI PCI graphic ROM found at %08lx (%u kB), fb at %08lx (%u MB)\n", printk 1001 drivers/video/console/sticore.c printk(KERN_WARNING "Unable to handle STI device '%s'\n", printk 1061 drivers/video/console/sticore.c printk(KERN_INFO "STI GSC/PCI core graphics driver " printk 224 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG "VIDC registers for %dx%dx%d:\n", var->xres, printk 226 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-cycle : %d\n", vidc.h_cycle); printk 227 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-sync-width : %d\n", vidc.h_sync_width); printk 228 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-border-start : %d\n", vidc.h_border_start); printk 229 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-display-start : %d\n", vidc.h_display_start); printk 230 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-display-end : %d\n", vidc.h_display_end); printk 231 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-border-end : %d\n", vidc.h_border_end); printk 232 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " H-interlace : %d\n", vidc.h_interlace); printk 233 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " V-cycle : %d\n", vidc.v_cycle); printk 234 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " V-sync-width : %d\n", vidc.v_sync_width); printk 235 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " V-border-start : %d\n", vidc.v_border_start); printk 236 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " V-display-start : %d\n", vidc.v_display_start); printk 237 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " V-display-end : %d\n", vidc.v_display_end); printk 238 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " V-border-end : %d\n", vidc.v_border_end); printk 239 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " Ext Ctrl (C) : 0x%08X\n", ext_ctl); printk 240 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " PLL Ctrl (D) : 0x%08X\n", vidc.pll_ctl); printk 241 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " Ctrl (E) : 0x%08X\n", vidc.control); printk 242 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " Data Ctrl (F) : 0x%08X\n", dat_ctl); printk 243 drivers/video/fbdev/acornfb.c printk(KERN_DEBUG " Fsize : 0x%08X\n", fsize); printk 805 drivers/video/fbdev/acornfb.c printk(KERN_ERR "Acornfb: bad monitor settings: %s\n", opt); printk 836 drivers/video/fbdev/acornfb.c printk(KERN_ERR "acornfb: unknown monitor type: %s\n", printk 844 drivers/video/fbdev/acornfb.c printk(KERN_ERR printk 910 drivers/video/fbdev/acornfb.c printk(KERN_ERR "acornfb: unknown parameter: %s\n", printk 956 drivers/video/fbdev/acornfb.c printk("acornfb: freed %dK memory\n", mb_freed); printk 1044 drivers/video/fbdev/acornfb.c printk(KERN_ERR "acornfb: unable to allocate screen memory\n"); printk 1093 drivers/video/fbdev/acornfb.c printk("Acornfb: no valid mode found\n"); printk 1103 drivers/video/fbdev/acornfb.c printk(KERN_INFO "Acornfb: %dkB %cRAM, %s, using %dx%d, %d.%03dkHz, %dHz\n", printk 1109 drivers/video/fbdev/acornfb.c printk(KERN_INFO "Acornfb: Monitor: %d.%03d-%d.%03dkHz, %d-%dHz%s\n", printk 1116 drivers/video/fbdev/acornfb.c printk(KERN_ERR "Acornfb: unable to set display parameters\n"); printk 323 drivers/video/fbdev/amba-clcd.c printk(KERN_INFO printk 471 drivers/video/fbdev/amba-clcd.c printk(KERN_ERR "CLCD: unable to remap registers\n"); printk 542 drivers/video/fbdev/amba-clcd.c printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret); printk 895 drivers/video/fbdev/amba-clcd.c printk(KERN_ERR "CLCD: unable to reserve regs region\n"); printk 98 drivers/video/fbdev/amifb.c # define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) printk 3620 drivers/video/fbdev/amifb.c printk("Unknown graphics chipset, defaulting to OCS\n"); printk 537 drivers/video/fbdev/arcfb.c printk(KERN_WARNING "no IO addresses supplied\n"); printk 555 drivers/video/fbdev/arcfb.c printk(KERN_INFO printk 237 drivers/video/fbdev/asiliantfb.c printk(KERN_ERR "asiliantfb dotclock must be between 3.125 and 220MHz\n"); printk 519 drivers/video/fbdev/asiliantfb.c printk(KERN_ERR "C&T 69000 fb failed to alloc cmap memory\n"); printk 525 drivers/video/fbdev/asiliantfb.c printk(KERN_ERR "C&T 69000 framebuffer failed to register\n"); printk 90 drivers/video/fbdev/aty/aty128fb.c printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args); printk 603 drivers/video/fbdev/aty/aty128fb.c printk(KERN_DEBUG "aty128fb: PLL write timeout!\n"); printk 836 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: ROM failed to map\n"); printk 842 drivers/video/fbdev/aty/aty128fb.c printk(KERN_DEBUG "aty128fb: Invalid ROM signature %x should " printk 876 drivers/video/fbdev/aty/aty128fb.c printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n", printk 883 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n"); printk 886 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n"); printk 889 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n"); printk 892 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", printk 1091 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n"); printk 1100 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Not enough memory for mode\n"); printk 1112 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: invalid width ranges\n"); printk 1222 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Invalid pixel width\n"); printk 1472 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Mode out of range!\n"); printk 1860 drivers/video/fbdev/aty/aty128fb.c printk(KERN_WARNING "aty128: Backlight registration failed\n"); printk 1873 drivers/video/fbdev/aty/aty128fb.c printk("aty128: Backlight initialized (%s)\n", name); printk 1884 drivers/video/fbdev/aty/aty128fb.c printk("aty128: Backlight unloaded\n"); printk 1926 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev); printk 1929 drivers/video/fbdev/aty/aty128fb.c printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name); printk 1931 drivers/video/fbdev/aty/aty128fb.c printk("%dk %s\n", par->vram_size / 1024, par->mem->name); printk 2012 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Cannot set default mode.\n"); printk 2066 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n", printk 2074 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: cannot reserve frame " printk 2082 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n"); printk 2118 drivers/video/fbdev/aty/aty128fb.c printk(KERN_ERR "aty128fb: Can't write to video register!\n"); printk 2129 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n"); printk 2131 drivers/video/fbdev/aty/aty128fb.c printk(KERN_INFO "aty128fb: Rage128 BIOS located\n"); printk 2398 drivers/video/fbdev/aty/aty128fb.c printk(KERN_DEBUG "aty128fb: suspending...\n"); printk 2480 drivers/video/fbdev/aty/aty128fb.c printk(KERN_DEBUG "aty128fb: resumed !\n"); printk 116 drivers/video/fbdev/aty/atyfb_base.c printk(KERN_CRIT "atyfb: " msg "\n"); \ printk 122 drivers/video/fbdev/aty/atyfb_base.c printk(KERN_CRIT "atyfb: " msg " %x(%x)\n", x, _max_); \ printk 127 drivers/video/fbdev/aty/atyfb_base.c #define DPRINTK(fmt, args...) printk(KERN_DEBUG "atyfb: " fmt, ## args) printk 132 drivers/video/fbdev/aty/atyfb_base.c #define PRINTKI(fmt, args...) printk(KERN_INFO "atyfb: " fmt, ## args) printk 133 drivers/video/fbdev/aty/atyfb_base.c #define PRINTKE(fmt, args...) printk(KERN_ERR "atyfb: " fmt, ## args) printk 1463 drivers/video/fbdev/aty/atyfb_base.c printk("debug atyfb: Mach64 non-shadow register values:"); printk 1467 drivers/video/fbdev/aty/atyfb_base.c printk("debug atyfb: 0x%04X: ", base + i); printk 1476 drivers/video/fbdev/aty/atyfb_base.c printk("debug atyfb: Mach64 PLL register values:"); printk 1480 drivers/video/fbdev/aty/atyfb_base.c printk("debug atyfb: 0x%02X: ", base + i); printk 1493 drivers/video/fbdev/aty/atyfb_base.c printk("debug atyfb: LCD register values:"); printk 1633 drivers/video/fbdev/aty/atyfb_base.c printk("atyfb: someone disabled IRQ [%08x]\n", printk 2228 drivers/video/fbdev/aty/atyfb_base.c printk(KERN_WARNING "aty: Backlight registration failed\n"); printk 2241 drivers/video/fbdev/aty/atyfb_base.c printk("aty: Backlight initialized (%s)\n", name); printk 2253 drivers/video/fbdev/aty/atyfb_base.c printk("aty: Backlight unloaded\n"); printk 2559 drivers/video/fbdev/aty/atyfb_base.c printk("debug atyfb: BUS_CNTL DAC_CNTL MEM_CNTL " printk 203 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): dsp_config 0x%08x, dsp_on_off 0x%08x\n", printk 218 drivers/video/fbdev/aty/mach64_ct.c printk(KERN_CRIT "atyfb: vclk out of range\n"); printk 231 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): pllvclk=%d MHz, vclk=%d MHz\n", printk 276 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): calculated 0x%08X(%i)\n", __func__, ret, ret); printk 289 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): about to program:\n" printk 294 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): setting clock %lu for FeedBackDivider %i, ReferenceDivider %i, PostDivider %i(%i)\n", printk 422 drivers/video/fbdev/aty/mach64_ct.c printk(KERN_CRIT "atyfb: Unsupported xclk source: %d.\n", pll->ct.xclk_post_div); printk 432 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): mclk_fb_mult=%d, xclk_post_div=%d\n", printk 531 drivers/video/fbdev/aty/mach64_ct.c printk(KERN_CRIT "atxfb: xclk out of range\n"); printk 552 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): pllmclk=%d MHz, xclk=%d MHz\n", printk 580 drivers/video/fbdev/aty/mach64_ct.c printk(KERN_CRIT "atyfb: mclk out of range\n"); printk 593 drivers/video/fbdev/aty/mach64_ct.c printk("atyfb(%s): use sclk, pllsclk=%d MHz, sclk=mclk=%d MHz\n", printk 145 drivers/video/fbdev/aty/radeon_backlight.c printk("radeonfb: Memory allocation failed\n"); printk 158 drivers/video/fbdev/aty/radeon_backlight.c printk("radeonfb: Backlight registration failed\n"); printk 189 drivers/video/fbdev/aty/radeon_backlight.c printk("radeonfb: Backlight initialized (%s)\n", name); printk 210 drivers/video/fbdev/aty/radeon_backlight.c printk("radeonfb: Backlight unloaded\n"); printk 367 drivers/video/fbdev/aty/radeon_base.c printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); printk 389 drivers/video/fbdev/aty/radeon_base.c printk(KERN_ERR "radeonfb: Flush Timeout !\n"); printk 406 drivers/video/fbdev/aty/radeon_base.c printk(KERN_ERR "radeonfb: Idle Timeout !\n"); printk 440 drivers/video/fbdev/aty/radeon_base.c printk(KERN_ERR "radeonfb (%s): ROM failed to map\n", printk 449 drivers/video/fbdev/aty/radeon_base.c printk(KERN_DEBUG "radeonfb (%s): Invalid ROM signature %x " printk 482 drivers/video/fbdev/aty/radeon_base.c printk(KERN_WARNING "radeonfb (%s): PCI DATA signature in ROM" printk 489 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Found Intel x86 BIOS ROM Image\n"); printk 492 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Found Open Firmware ROM Image\n"); printk 495 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Found HP PA-RISC ROM Image\n"); printk 498 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Found unknown type %d ROM Image\n", rom_type); printk 557 drivers/video/fbdev/aty/radeon_base.c printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n"); printk 687 drivers/video/fbdev/aty/radeon_base.c printk(KERN_WARNING "xtal calculation failed: %ld\n", xtal); printk 779 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n"); printk 798 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n"); printk 807 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Retrieved PLL infos from registers\n"); printk 814 drivers/video/fbdev/aty/radeon_base.c printk(KERN_INFO "radeonfb: Used default PLL infos\n"); printk 827 drivers/video/fbdev/aty/radeon_base.c printk("radeonfb: Reference=%d.%02d MHz (RefDiv=%d) Memory=%d.%02d Mhz, System=%d.%02d MHz\n", printk 832 drivers/video/fbdev/aty/radeon_base.c printk("radeonfb: PLL min %d max %d\n", rinfo->pll.ppll_min, rinfo->pll.ppll_max); printk 912 drivers/video/fbdev/aty/radeon_base.c printk ("radeonfb: mode %dx%dx%d rejected, color depth invalid\n", printk 2288 drivers/video/fbdev/aty/radeon_base.c printk(KERN_ERR "radeonfb (%s): Cannot enable PCI device\n", printk 2331 drivers/video/fbdev/aty/radeon_base.c printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n", printk 2338 drivers/video/fbdev/aty/radeon_base.c printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n", printk 2346 drivers/video/fbdev/aty/radeon_base.c printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n", printk 2378 drivers/video/fbdev/aty/radeon_base.c printk(KERN_WARNING "radeonfb (%s): Cannot match card to OF node !\n", printk 2402 drivers/video/fbdev/aty/radeon_base.c printk (KERN_ERR "radeonfb (%s): cannot map FB\n", printk 2490 drivers/video/fbdev/aty/radeon_base.c printk (KERN_ERR "radeonfb (%s): could not register framebuffer\n", printk 2502 drivers/video/fbdev/aty/radeon_base.c printk ("radeonfb (%s): %s\n", pci_name(rinfo->pdev), rinfo->name); printk 90 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n", printk 177 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n"); printk 185 drivers/video/fbdev/aty/radeon_monitor.c printk("radeonfb: panel ID string: %s\n", stmp); printk 188 drivers/video/fbdev/aty/radeon_monitor.c printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n", printk 205 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n"); printk 270 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_WARNING "radeonfb: No connector info table detected\n"); printk 476 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n"); printk 540 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: Reversed DACs detected\n"); printk 544 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: Reversed TMDS detected\n"); printk 572 drivers/video/fbdev/aty/radeon_monitor.c printk("Non-DDC laptop panel detected\n"); printk 636 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n", printk 639 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: EDID probed\n"); printk 642 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n", printk 645 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_INFO "radeonfb: EDID probed\n"); printk 674 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x " printk 858 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n"); printk 862 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n", printk 869 drivers/video/fbdev/aty/radeon_monitor.c printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n"); printk 896 drivers/video/fbdev/aty/radeon_monitor.c printk("Falling back to 800x600 on JSxx hardware\n"); printk 108 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG "radeonfb: %s detected" printk 1453 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_WARNING "radeon: PAD_CTLR_STRENGTH doesn't " printk 2552 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG "radeonfb (%s): switching to D2 state...\n", printk 2598 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n", printk 2624 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG "radeonfb (%s): suspending for event: %d...\n", printk 2732 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n", printk 2745 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_ERR "radeonfb (%s): can't resume radeon from" printk 2824 drivers/video/fbdev/aty/radeon_pm.c printk("radeonfb: Dynamic Clock Power Management enabled\n"); printk 2827 drivers/video/fbdev/aty/radeon_pm.c printk("radeonfb: Dynamic Clock Power Management disabled\n"); printk 2892 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG printk 2898 drivers/video/fbdev/aty/radeon_pm.c printk(KERN_DEBUG printk 35 drivers/video/fbdev/au1100fb.h #define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg) printk 36 drivers/video/fbdev/au1100fb.h #define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg) printk 37 drivers/video/fbdev/au1100fb.h #define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg) printk 40 drivers/video/fbdev/au1100fb.h #define print_dbg(f, arg...) printk(__FILE__ ": " f "\n", ## arg) printk 57 drivers/video/fbdev/au1200fb.c #define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg) printk 58 drivers/video/fbdev/au1200fb.c #define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg) printk 59 drivers/video/fbdev/au1200fb.c #define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg) printk 62 drivers/video/fbdev/au1200fb.c #define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg) printk 698 drivers/video/fbdev/au1200fb.c printk("au1200fb: ERROR: fbinfo2index failed!\n"); printk 816 drivers/video/fbdev/au1200fb.c printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres); printk 888 drivers/video/fbdev/au1200fb.c #define D(X) printk("%25s: %08X\n", #X, X) printk 1665 drivers/video/fbdev/au1200fb.c printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name); printk 1666 drivers/video/fbdev/au1200fb.c printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name); printk 265 drivers/video/fbdev/bw2.c printk(KERN_ERR "bw2: can't handle SR %02x\n", printk 337 drivers/video/fbdev/bw2.c printk(KERN_INFO "%pOF: bwtwo at %lx:%lx\n", printk 498 drivers/video/fbdev/carminefb.c printk(KERN_ERR "DRAM init failed\n"); printk 632 drivers/video/fbdev/carminefb.c printk(KERN_ERR "carminefb: Can't reserve regbase.\n"); printk 639 drivers/video/fbdev/carminefb.c printk(KERN_ERR "carminefb: Can't remap %s register.\n", printk 655 drivers/video/fbdev/carminefb.c printk(KERN_ERR "carminefb: Memory bar is only %d bytes, %d " printk 663 drivers/video/fbdev/carminefb.c printk(KERN_ERR "carminefb: Can't reserve smem.\n"); printk 670 drivers/video/fbdev/carminefb.c printk(KERN_ERR "carmine: Can't ioremap smem area.\n"); printk 773 drivers/video/fbdev/carminefb.c printk(KERN_ERR "If you disable both displays than you don't " printk 555 drivers/video/fbdev/cg14.c printk(KERN_INFO "%pOF: cgfourteen at %lx:%lx, %dMB\n", printk 329 drivers/video/fbdev/cg3.c printk(KERN_ERR "cgthree: can't handle SR %02x\n", printk 416 drivers/video/fbdev/cg3.c printk(KERN_INFO "%pOF: cg3 at %lx:%lx\n", printk 814 drivers/video/fbdev/cg6.c printk(KERN_INFO "%pOF: CGsix [%s] at %lx:%lx\n", printk 73 drivers/video/fbdev/cirrusfb.c printk("Assertion failed! %s,%s,%s,line=%d\n", \ printk 2090 drivers/video/fbdev/cirrusfb.c printk(KERN_ERR "cirrusfb: Cannot enable PCI device\n"); printk 225 drivers/video/fbdev/controlfb.c printk (KERN_ERR "controlfb_set_par: error calling" printk 409 drivers/video/fbdev/controlfb.c printk(KERN_INFO "controlfb: "); printk 426 drivers/video/fbdev/controlfb.c printk(KERN_CONT "Monitor sense value = 0x%x, ", sense); printk 439 drivers/video/fbdev/controlfb.c printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode); printk 444 drivers/video/fbdev/controlfb.c printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n"); printk 447 drivers/video/fbdev/controlfb.c printk(KERN_INFO "controlfb: "); printk 449 drivers/video/fbdev/controlfb.c printk("using video mode %d and color mode %d.\n", vmode, cmode); printk 661 drivers/video/fbdev/controlfb.c printk(KERN_INFO "controlfb: VRAM Total = %dMB " printk 676 drivers/video/fbdev/controlfb.c printk(KERN_ERR "controlfb: only one control is supported\n"); printk 682 drivers/video/fbdev/controlfb.c printk(KERN_ERR "can't get 2 addresses for control\n"); printk 320 drivers/video/fbdev/core/cfbfillrect.c printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); printk 350 drivers/video/fbdev/core/cfbfillrect.c printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); printk 41 drivers/video/fbdev/core/cfbimgblt.c #define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt,__func__,## args) printk 59 drivers/video/fbdev/core/fb_defio.c printk(KERN_ERR "no mapping available\n"); printk 86 drivers/video/fbdev/core/fbcon.c # define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) printk 683 drivers/video/fbdev/core/fbcon.c printk(KERN_INFO printk 809 drivers/video/fbdev/core/fbcon.c printk(KERN_ERR "con2fb_release_oldinfo: " printk 830 drivers/video/fbdev/core/fbcon.c printk(KERN_ERR "con2fb_init_display: detected " printk 1187 drivers/video/fbdev/core/fbcon.c printk(KERN_ERR "fbcon_init: detected " printk 2299 drivers/video/fbdev/core/fbcon.c printk(KERN_ERR "fbcon_switch: detected " printk 3193 drivers/video/fbdev/core/fbcon.c printk(KERN_INFO "fbcon: Remapping primary device, " printk 3208 drivers/video/fbdev/core/fbcon.c printk(KERN_INFO "fbcon: %s (fb%i) is primary device\n", printk 3216 drivers/video/fbdev/core/fbcon.c printk(KERN_INFO "fbcon: Remapping primary device, " printk 3693 drivers/video/fbdev/core/fbcon.c printk(KERN_WARNING "Unable to create device " printk 205 drivers/video/fbdev/core/fbcvt.c printk(KERN_INFO "fbcvt: Aspect ratio not CVT " printk 266 drivers/video/fbdev/core/fbcvt.c printk(KERN_INFO "%s\n", buf); printk 327 drivers/video/fbdev/core/fbcvt.c printk(KERN_INFO "fbcvt: Invalid input parameters\n"); printk 333 drivers/video/fbdev/core/fbcvt.c printk(KERN_INFO "fbcvt: Refresh rate not CVT " printk 347 drivers/video/fbdev/core/fbcvt.c printk(KERN_INFO "fbcvt: 60Hz refresh rate " printk 1028 drivers/video/fbdev/core/fbmem.c printk(KERN_WARNING "detected " printk 1531 drivers/video/fbdev/core/fbmem.c printk(KERN_DEBUG "checking generic (%llx %llx) vs hw (%llx %llx)\n", printk 1564 drivers/video/fbdev/core/fbmem.c printk(KERN_INFO "fb%d: switching to %s from %s\n", printk 1604 drivers/video/fbdev/core/fbmem.c printk(KERN_WARNING "Unable to create device for framebuffer %d; errno = %ld\n", i, PTR_ERR(fb_info->dev)); printk 1902 drivers/video/fbdev/core/fbmem.c printk("unable to get major %d for fb devs\n", FB_MAJOR); printk 45 drivers/video/fbdev/core/fbmon.c #define DPRINTK(fmt, args...) printk(fmt,## args) printk 200 drivers/video/fbdev/core/fbmon.c printk("fbmon: The EDID Block of " printk 214 drivers/video/fbdev/core/fbmon.c printk("fbmon: trying a header reconstruct\n"); printk 218 drivers/video/fbdev/core/fbmon.c printk("fbmon: trying to fix input type\n"); printk 224 drivers/video/fbdev/core/fbmon.c printk("fbmon: trying to fix monitor timings\n"); printk 888 drivers/video/fbdev/core/fbmon.c printk(" Display is GTF capable\n"); printk 27 drivers/video/fbdev/core/modedb.c #define DPRINTK(fmt, args...) printk("modedb %s: " fmt, __func__ , ## args) printk 283 drivers/video/fbdev/core/sysfillrect.c printk( KERN_ERR "cfb_fillrect(): unknown rop, " printk 313 drivers/video/fbdev/core/sysfillrect.c printk(KERN_ERR "sys_fillrect(): unknown rop, " printk 21 drivers/video/fbdev/core/sysimgblt.c #define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt,__func__,## args) printk 1114 drivers/video/fbdev/cyber2000fb.c printk(KERN_ERR "disable_extregs: count = 0\n"); printk 1508 drivers/video/fbdev/cyber2000fb.c printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt); printk 1568 drivers/video/fbdev/cyber2000fb.c printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id); printk 1592 drivers/video/fbdev/cyber2000fb.c printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", printk 1666 drivers/video/fbdev/cyber2000fb.c printk(KERN_ERR "iga5000: cannot map I/O\n"); printk 1693 drivers/video/fbdev/cyber2000fb.c printk(KERN_INFO "%s: NOT enabling PCI bursts\n", printk 1698 drivers/video/fbdev/cyber2000fb.c printk(KERN_INFO "%s: enabling PCI bursts\n", printk 264 drivers/video/fbdev/dnfb.c printk("apollo frame buffer alive and kicking !\n"); printk 369 drivers/video/fbdev/efifb.c printk(KERN_DEBUG "efifb: invalid framebuffer address\n"); printk 372 drivers/video/fbdev/efifb.c printk(KERN_INFO "efifb: probing for efifb\n"); printk 1001 drivers/video/fbdev/ffb.c printk(KERN_INFO "%pOF: %s at %016lx, type %d, " printk 244 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: turn off DMA timed out\n"); printk 259 drivers/video/fbdev/gbefb.c printk(KERN_ERR printk 270 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: wait for vpixen_off timed out\n"); printk 285 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: turn off pixel clock timed out\n"); printk 300 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: turn off dotclock timed out\n"); printk 337 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: turn on dotclock timed out\n"); printk 352 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: turn on pixel clock timed out\n"); printk 367 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: turn on DMA timed out\n"); printk 380 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); printk 869 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); printk 1146 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: couldn't reserve mmio region\n"); printk 1154 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: couldn't map mmio region\n"); printk 1164 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: couldn't allocate tiles table\n"); printk 1174 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: couldn't map framebuffer\n"); printk 1187 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n"); printk 1220 drivers/video/fbdev/gbefb.c printk(KERN_ERR "gbefb: couldn't register framebuffer\n"); printk 306 drivers/video/fbdev/geode/gx1fb_core.c printk(KERN_WARNING "gx1fb: invalid 'panel' option -- disabling flat panel\n"); printk 351 drivers/video/fbdev/geode/gxfb_core.c printk(KERN_ERR "gxfb: power up failed!\n"); printk 472 drivers/video/fbdev/geode/lxfb_core.c printk(KERN_ERR "lxfb: power up failed!\n"); printk 705 drivers/video/fbdev/gxt4500.c printk(KERN_ERR "gxt4500: cannot set video mode\n"); printk 48 drivers/video/fbdev/hgafb.c #define DPRINTK(args...) printk(KERN_DEBUG __FILE__": " ##args) printk 54 drivers/video/fbdev/hgafb.c #define CHKINFO(ret) if (info != &fb_info) { printk(KERN_DEBUG __FILE__": This should never happen, line:%d \n", __LINE__); return ret; } printk 555 drivers/video/fbdev/hgafb.c printk(KERN_INFO "hgafb: HGA card not detected.\n"); printk 561 drivers/video/fbdev/hgafb.c printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n", printk 253 drivers/video/fbdev/hpfb.c printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n", printk 255 drivers/video/fbdev/hpfb.c printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n", printk 342 drivers/video/fbdev/hpfb.c printk(KERN_INFO "Topcat found at DIO select code %d " printk 410 drivers/video/fbdev/hpfb.c printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid); printk 37 drivers/video/fbdev/i810/i810-i2c.c #define DPRINTK(fmt, args...) printk(fmt,## args) printk 38 drivers/video/fbdev/i810/i810_accel.c printk("IIR : 0x%04x\n" printk 75 drivers/video/fbdev/i810/i810_accel.c printk("ringbuffer lockup!!!\n"); printk 102 drivers/video/fbdev/i810/i810_accel.c printk("accel engine lockup!!!\n"); printk 103 drivers/video/fbdev/i810/i810_accel.c printk("INSTDONE: 0x%04x\n", i810_readl(INSTDONE, mmio)); printk 1014 drivers/video/fbdev/i810/i810_main.c printk("i810fb: required video memory, " printk 1069 drivers/video/fbdev/i810/i810_main.c printk("i810fb: invalid video mode%s\n", printk 1674 drivers/video/fbdev/i810/i810_main.c printk("i810fb_alloc_fbmem: cannot acquire agpgart\n"); printk 1679 drivers/video/fbdev/i810/i810_main.c printk("i810fb_alloc_fbmem: can't allocate framebuffer " printk 1686 drivers/video/fbdev/i810/i810_main.c printk("i810fb_alloc_fbmem: can't bind framebuffer memory\n"); printk 1694 drivers/video/fbdev/i810/i810_main.c printk("i810fb_alloc_cursormem: can't allocate " printk 1701 drivers/video/fbdev/i810/i810_main.c printk("i810fb_alloc_cursormem: cannot bind cursor memory\n"); printk 1844 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: cannot enable device\n"); printk 1859 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: device is disabled\n"); printk 1866 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: cannot request framebuffer region\n"); printk 1874 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: cannot remap framebuffer region\n"); printk 1881 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: cannot request mmio region\n"); printk 1889 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: cannot remap mmio region\n"); printk 1921 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init_pci: DDC probe successful\n"); printk 1926 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init_pci: Unable to get Mode Database\n"); printk 2068 drivers/video/fbdev/i810/i810_main.c printk("i810fb_init: cannot register framebuffer device\n"); printk 2080 drivers/video/fbdev/i810/i810_main.c printk("I810FB: fb%d : %s v%d.%d.%d%s\n" printk 2133 drivers/video/fbdev/i810/i810_main.c printk("cleanup_module: unloaded i810 framebuffer device\n"); printk 1420 drivers/video/fbdev/imsttfb.c printk("imsttfb: %ux%ux%u not supported\n", info->var.xres, info->var.yres, info->var.bits_per_pixel); printk 1475 drivers/video/fbdev/imsttfb.c printk(KERN_INFO "%s: OF name %pOFn\n",__func__, dp); printk 1477 drivers/video/fbdev/imsttfb.c printk(KERN_ERR "imsttfb: no OF node for pci device\n"); printk 1489 drivers/video/fbdev/imsttfb.c printk(KERN_ERR "imsttfb: Can't reserve memory region\n"); printk 1505 drivers/video/fbdev/imsttfb.c printk(KERN_INFO "imsttfb: Device 0x%x unknown, " printk 398 drivers/video/fbdev/imxfb.c printk(KERN_WARNING "Must limit pixel clock to %luHz\n", printk 599 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid xres %d\n", printk 602 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid hsync_len %d\n", printk 605 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid left_margin %d\n", printk 608 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid right_margin %d\n", printk 611 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid yres %d\n", printk 614 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid vsync_len %d\n", printk 617 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid upper_margin %d\n", printk 620 drivers/video/fbdev/imxfb.c printk(KERN_ERR "%s: invalid lower_margin %d\n", printk 94 drivers/video/fbdev/intelfb/intelfb.h #define ERR_MSG(fmt, args...) printk(KERN_ERR PFX fmt, ## args) printk 95 drivers/video/fbdev/intelfb/intelfb.h #define WRN_MSG(fmt, args...) printk(KERN_WARNING PFX fmt, ## args) printk 96 drivers/video/fbdev/intelfb/intelfb.h #define NOT_MSG(fmt, args...) printk(KERN_NOTICE PFX fmt, ## args) printk 97 drivers/video/fbdev/intelfb/intelfb.h #define INF_MSG(fmt, args...) printk(KERN_INFO PFX fmt, ## args) printk 99 drivers/video/fbdev/intelfb/intelfb.h #define DBG_MSG(fmt, args...) printk(KERN_DEBUG PFX fmt, ## args) printk 101 drivers/video/fbdev/intelfb/intelfb.h #define DBG_MSG(fmt, args...) while (0) printk(fmt, ## args) printk 780 drivers/video/fbdev/intelfb/intelfbdrv.c printk("%s ", s); printk 785 drivers/video/fbdev/intelfb/intelfbdrv.c printk("). Disabling mode switching.\n"); printk 1033 drivers/video/fbdev/intelfb/intelfbdrv.c printk("intelfb: Looking for mode in private " printk 1041 drivers/video/fbdev/intelfb/intelfbdrv.c printk("intelfb: No mode in private database, " printk 723 drivers/video/fbdev/intelfb/intelfbhw.c printk("hw state dump start\n"); printk 724 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGA0_DIVISOR: 0x%08x\n", hw->vga0_divisor); printk 725 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGA1_DIVISOR: 0x%08x\n", hw->vga1_divisor); printk 726 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGAPD: 0x%08x\n", hw->vga_pd); printk 733 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n", printk 735 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGA0: clock is %d\n", printk 743 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n", printk 745 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGA1: clock is %d\n", printk 748 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DPLL_A: 0x%08x\n", hw->dpll_a); printk 749 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DPLL_B: 0x%08x\n", hw->dpll_b); printk 750 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FPA0: 0x%08x\n", hw->fpa0); printk 751 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FPA1: 0x%08x\n", hw->fpa1); printk 752 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FPB0: 0x%08x\n", hw->fpb0); printk 753 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FPB1: 0x%08x\n", hw->fpb1); printk 761 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n", printk 763 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PLLA0: clock is %d\n", printk 772 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n", printk 774 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PLLA1: clock is %d\n", printk 778 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PALETTE_A:\n"); printk 780 drivers/video/fbdev/intelfb/intelfbhw.c printk(" %3d: 0x%08x\n", i, hw->palette_a[i]); printk 781 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PALETTE_B:\n"); printk 783 drivers/video/fbdev/intelfb/intelfbhw.c printk(" %3d: 0x%08x\n", i, hw->palette_b[i]); printk 786 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HTOTAL_A: 0x%08x\n", hw->htotal_a); printk 787 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HBLANK_A: 0x%08x\n", hw->hblank_a); printk 788 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HSYNC_A: 0x%08x\n", hw->hsync_a); printk 789 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VTOTAL_A: 0x%08x\n", hw->vtotal_a); printk 790 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VBLANK_A: 0x%08x\n", hw->vblank_a); printk 791 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VSYNC_A: 0x%08x\n", hw->vsync_a); printk 792 drivers/video/fbdev/intelfb/intelfbhw.c printk(" SRC_SIZE_A: 0x%08x\n", hw->src_size_a); printk 793 drivers/video/fbdev/intelfb/intelfbhw.c printk(" BCLRPAT_A: 0x%08x\n", hw->bclrpat_a); printk 794 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HTOTAL_B: 0x%08x\n", hw->htotal_b); printk 795 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HBLANK_B: 0x%08x\n", hw->hblank_b); printk 796 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HSYNC_B: 0x%08x\n", hw->hsync_b); printk 797 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VTOTAL_B: 0x%08x\n", hw->vtotal_b); printk 798 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VBLANK_B: 0x%08x\n", hw->vblank_b); printk 799 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VSYNC_B: 0x%08x\n", hw->vsync_b); printk 800 drivers/video/fbdev/intelfb/intelfbhw.c printk(" SRC_SIZE_B: 0x%08x\n", hw->src_size_b); printk 801 drivers/video/fbdev/intelfb/intelfbhw.c printk(" BCLRPAT_B: 0x%08x\n", hw->bclrpat_b); printk 803 drivers/video/fbdev/intelfb/intelfbhw.c printk(" ADPA: 0x%08x\n", hw->adpa); printk 804 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DVOA: 0x%08x\n", hw->dvoa); printk 805 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DVOB: 0x%08x\n", hw->dvob); printk 806 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DVOC: 0x%08x\n", hw->dvoc); printk 807 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DVOA_SRCDIM: 0x%08x\n", hw->dvoa_srcdim); printk 808 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DVOB_SRCDIM: 0x%08x\n", hw->dvob_srcdim); printk 809 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DVOC_SRCDIM: 0x%08x\n", hw->dvoc_srcdim); printk 810 drivers/video/fbdev/intelfb/intelfbhw.c printk(" LVDS: 0x%08x\n", hw->lvds); printk 812 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PIPEACONF: 0x%08x\n", hw->pipe_a_conf); printk 813 drivers/video/fbdev/intelfb/intelfbhw.c printk(" PIPEBCONF: 0x%08x\n", hw->pipe_b_conf); printk 814 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DISPARB: 0x%08x\n", hw->disp_arb); printk 816 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_A_CONTROL: 0x%08x\n", hw->cursor_a_control); printk 817 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_B_CONTROL: 0x%08x\n", hw->cursor_b_control); printk 818 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_A_BASEADDR: 0x%08x\n", hw->cursor_a_base); printk 819 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_B_BASEADDR: 0x%08x\n", hw->cursor_b_base); printk 821 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_A_PALETTE: "); printk 823 drivers/video/fbdev/intelfb/intelfbhw.c printk("0x%08x", hw->cursor_a_palette[i]); printk 825 drivers/video/fbdev/intelfb/intelfbhw.c printk(", "); printk 827 drivers/video/fbdev/intelfb/intelfbhw.c printk("\n"); printk 828 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_B_PALETTE: "); printk 830 drivers/video/fbdev/intelfb/intelfbhw.c printk("0x%08x", hw->cursor_b_palette[i]); printk 832 drivers/video/fbdev/intelfb/intelfbhw.c printk(", "); printk 834 drivers/video/fbdev/intelfb/intelfbhw.c printk("\n"); printk 836 drivers/video/fbdev/intelfb/intelfbhw.c printk(" CURSOR_SIZE: 0x%08x\n", hw->cursor_size); printk 838 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DSPACNTR: 0x%08x\n", hw->disp_a_ctrl); printk 839 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DSPBCNTR: 0x%08x\n", hw->disp_b_ctrl); printk 840 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DSPABASE: 0x%08x\n", hw->disp_a_base); printk 841 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DSPBBASE: 0x%08x\n", hw->disp_b_base); printk 842 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DSPASTRIDE: 0x%08x\n", hw->disp_a_stride); printk 843 drivers/video/fbdev/intelfb/intelfbhw.c printk(" DSPBSTRIDE: 0x%08x\n", hw->disp_b_stride); printk 845 drivers/video/fbdev/intelfb/intelfbhw.c printk(" VGACNTRL: 0x%08x\n", hw->vgacntrl); printk 846 drivers/video/fbdev/intelfb/intelfbhw.c printk(" ADD_ID: 0x%08x\n", hw->add_id); printk 849 drivers/video/fbdev/intelfb/intelfbhw.c printk(" SWF0%d 0x%08x\n", i, printk 853 drivers/video/fbdev/intelfb/intelfbhw.c printk(" SWF1%d 0x%08x\n", i, printk 857 drivers/video/fbdev/intelfb/intelfbhw.c printk(" SWF3%d 0x%08x\n", i, printk 861 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FENCE%d 0x%08x\n", i, printk 864 drivers/video/fbdev/intelfb/intelfbhw.c printk(" INSTPM 0x%08x\n", hw->instpm); printk 865 drivers/video/fbdev/intelfb/intelfbhw.c printk(" MEM_MODE 0x%08x\n", hw->mem_mode); printk 866 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FW_BLC_0 0x%08x\n", hw->fw_blc_0); printk 867 drivers/video/fbdev/intelfb/intelfbhw.c printk(" FW_BLC_1 0x%08x\n", hw->fw_blc_1); printk 869 drivers/video/fbdev/intelfb/intelfbhw.c printk(" HWSTAM 0x%04x\n", hw->hwstam); printk 870 drivers/video/fbdev/intelfb/intelfbhw.c printk(" IER 0x%04x\n", hw->ier); printk 871 drivers/video/fbdev/intelfb/intelfbhw.c printk(" IIR 0x%04x\n", hw->iir); printk 872 drivers/video/fbdev/intelfb/intelfbhw.c printk(" IMR 0x%04x\n", hw->imr); printk 873 drivers/video/fbdev/intelfb/intelfbhw.c printk("hw state dump end\n"); printk 398 drivers/video/fbdev/kyro/fbdev.c printk(KERN_WARNING "kyrofb: depth not supported: %u\n", var->bits_per_pixel); printk 593 drivers/video/fbdev/kyro/fbdev.c printk(KERN_ERR "Kyro FB: failed to create overlay surface.\n"); printk 608 drivers/video/fbdev/kyro/fbdev.c printk(KERN_ERR "Kyro FB: failed to create overlay viewport.\n"); printk 614 drivers/video/fbdev/kyro/fbdev.c printk(KERN_ERR "Kyro FB: KYRO_IOCTL_SET_VIDEO_MODE is" printk 670 drivers/video/fbdev/kyro/fbdev.c printk(KERN_WARNING "kyrofb: Can't enable pdev: %d\n", err); printk 623 drivers/video/fbdev/leo.c printk(KERN_INFO "%pOF: leo at %lx:%lx\n", printk 178 drivers/video/fbdev/matrox/i2c-matroxfb.c printk(KERN_INFO "i2c-matroxfb: VGA->TV plug detected, DDC unavailable.\n"); printk 180 drivers/video/fbdev/matrox/i2c-matroxfb.c printk(KERN_INFO "i2c-matroxfb: Could not register secondary output i2c bus. Continuing anyway.\n"); printk 185 drivers/video/fbdev/matrox/i2c-matroxfb.c printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n"); printk 201 drivers/video/fbdev/matrox/i2c-matroxfb.c printk(KERN_ERR "i2c-matroxfb: Could not register primary adapter DDC bus.\n"); printk 223 drivers/video/fbdev/matrox/i2c-matroxfb.c printk(KERN_ERR "i2c-matroxfb: failed to register driver\n"); printk 151 drivers/video/fbdev/matrox/matroxfb_DAC1064.c printk(KERN_ERR "matroxfb: aiee, SYSPLL not locked\n"); printk 503 drivers/video/fbdev/matrox/matroxfb_DAC1064.c printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n"); printk 645 drivers/video/fbdev/matrox/matroxfb_DAC1064.c printk(KERN_ERR "matroxfb: Pixel PLL%c not locked after usual time\n", (reg-M1064_XPIXPLLAM-2)/4 + 'A'); printk 479 drivers/video/fbdev/matrox/matroxfb_Ti3026.c printk(KERN_ERR "matroxfb: Temporary pixel PLL not locked after 5 secs\n"); printk 503 drivers/video/fbdev/matrox/matroxfb_Ti3026.c printk(KERN_ERR "matroxfb: Memory PLL not locked after 5 secs\n"); printk 539 drivers/video/fbdev/matrox/matroxfb_Ti3026.c printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n"); printk 630 drivers/video/fbdev/matrox/matroxfb_Ti3026.c printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n"); printk 652 drivers/video/fbdev/matrox/matroxfb_Ti3026.c printk(KERN_ERR "matroxfb: Loop PLL not locked after 5 secs\n"); printk 249 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_DEBUG "matroxfb: someone disabled IRQ [%08X]\n", ien); printk 1612 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: Unknown outputs setting\n"); printk 1641 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_INFO "matroxfb: Matrox %s detected\n", b->name); printk 1690 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: control registers are not available, matroxfb disabled\n"); printk 1694 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: video RAM is not available in PCI address space, matroxfb disabled\n"); printk 1715 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: cannot ioremap(%lX, 16384), matroxfb disabled\n", ctrlptr_phys); printk 1723 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: cannot ioremap(%lX, %d), matroxfb disabled\n", printk 1739 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_WARNING "matroxfb: Disabling PCI retries due to i82437 present\n"); printk 1761 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: cannot determine memory size\n"); printk 1912 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_INFO "matroxfb: %dx%dx%dbpp (virtual: %dx%d)\n", printk 1915 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_INFO "matroxfb: framebuffer at 0x%lX, mapped to 0x%p, size %d\n", printk 2270 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "Invalid vesa mode 0x%04X\n", vesa); printk 2342 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: unsupported color depth\n"); printk 2586 drivers/video/fbdev/matrox/matroxfb_base.c printk(KERN_ERR "matroxfb: depth %d is not supported, using default\n", depth); printk 57 drivers/video/fbdev/matrox/matroxfb_base.h #define DBG(x) printk(KERN_DEBUG "matroxfb: %s\n", (x)); printk 87 drivers/video/fbdev/matrox/matroxfb_base.h #define dprintk(X...) printk(X) printk 644 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_ERR "matroxfb_crtc2: Internal consistency check failed: crtc2 already present: %p\n", printk 656 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_ERR "matroxfb_crtc2: secondary head failed to register\n"); printk 659 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_INFO "matroxfb_crtc2: secondary head of fb%u was registered as fb%u\n", printk 678 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_ERR "matroxfb_crtc2: Internal consistency check failed: crtc2 mismatch at unload: %p != %p\n", printk 680 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_ERR "matroxfb_crtc2: Expect kernel crash after module unload.\n"); printk 687 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_INFO "matroxfb_crtc2: fb%u unregistered\n", id); printk 706 drivers/video/fbdev/matrox/matroxfb_crtc2.c printk(KERN_ERR "matroxfb_crtc2: CRTC2 framebuffer failed to register\n"); printk 159 drivers/video/fbdev/matrox/matroxfb_maven.c printk(KERN_INFO "ReadReg(%d) failed\n", reg); printk 168 drivers/video/fbdev/matrox/matroxfb_maven.c printk(KERN_INFO "WriteReg(%d) failed\n", reg); printk 177 drivers/video/fbdev/matrox/matroxfb_maven.c printk(KERN_INFO "WriteRegPair(%d) failed\n", reg); printk 142 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "post_shift_max: %d\n", pll->post_shift_max); printk 143 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "ref_freq: %d\n", pll->ref_freq); printk 144 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "freq: %d\n", freq); printk 145 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "vco_freq_min: %d\n", pll->vco_freq_min); printk 146 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "in_div_min: %d\n", pll->in_div_min); printk 147 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "in_div_max: %d\n", pll->in_div_max); printk 148 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "feed_div_min: %d\n", pll->feed_div_min); printk 149 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "feed_div_max: %d\n", pll->feed_div_max); printk 150 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_ERR "fmax: %d\n", fmax); printk 516 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "PInS data found at offset %u\n", printk 727 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "matroxfb: Your Matrox device does not have BIOS\n"); printk 731 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "matroxfb: BIOS on your Matrox device does not contain powerup info\n"); printk 737 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "matroxfb: Unknown version (%u) of powerup info\n", pins_version); printk 744 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "matroxfb: Invalid powerup info\n"); printk 759 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_DEBUG "matroxfb: Powerup info version %u is not yet supported\n", pins_version); printk 786 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "matroxfb: Unable to map legacy BIOS\n"); printk 792 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "matroxfb: Legacy BIOS is for %04X:%04X, while this device is %04X:%04X\n", printk 802 drivers/video/fbdev/matrox/matroxfb_misc.c printk(KERN_INFO "PInS memtype = %u\n", printk 130 drivers/video/fbdev/maxinefb.c printk(KERN_INFO "Maxinefb: Personal DECstation detected\n"); printk 131 drivers/video/fbdev/maxinefb.c printk(KERN_INFO "Maxinefb: initializing onboard framebuffer\n"); printk 532 drivers/video/fbdev/mx3fb.c printk(KERN_CONT " hor_conf %x,", reg); printk 540 drivers/video/fbdev/mx3fb.c printk(KERN_CONT " ver_conf %x\n", reg); printk 92 drivers/video/fbdev/n411.c printk(KERN_ERR "timed out waiting for ack\n"); printk 113 drivers/video/fbdev/n411.c printk(KERN_ERR "Fail because ACK is already low\n"); printk 157 drivers/video/fbdev/n411.c printk(KERN_WARNING "no IO addresses supplied\n"); printk 241 drivers/video/fbdev/neofb.c printk(KERN_DEBUG "neoVCLK: f:%ld NumLow=%d NumHi=%d Den=%d Df=%ld\n", printk 538 drivers/video/fbdev/neofb.c printk(KERN_ERR printk 596 drivers/video/fbdev/neofb.c printk(KERN_INFO printk 628 drivers/video/fbdev/neofb.c printk(KERN_INFO printk 682 drivers/video/fbdev/neofb.c printk(KERN_WARNING "neofb: no support for %dbpp\n", printk 1675 drivers/video/fbdev/neofb.c printk("neofb: memory mapped IO in use\n"); printk 1681 drivers/video/fbdev/neofb.c printk("neofb: unable to map memory mapped IO\n"); printk 1686 drivers/video/fbdev/neofb.c printk(KERN_INFO "neofb: mapped io at %p\n", printk 1717 drivers/video/fbdev/neofb.c printk("neofb: frame buffer in use\n"); printk 1724 drivers/video/fbdev/neofb.c printk("neofb: unable to map screen memory\n"); printk 1729 drivers/video/fbdev/neofb.c printk(KERN_INFO "neofb: mapped framebuffer at %p\n", printk 1781 drivers/video/fbdev/neofb.c printk (KERN_INFO "Autodetected %s display\n", printk 1821 drivers/video/fbdev/neofb.c printk(KERN_ERR printk 1833 drivers/video/fbdev/neofb.c printk(KERN_INFO "Panel is a %dx%d %s %s display\n", printk 1854 drivers/video/fbdev/neofb.c printk(KERN_DEBUG "--- Neo extended register dump ---\n"); printk 1856 drivers/video/fbdev/neofb.c printk(KERN_DEBUG "CR %p: %p\n", (void *) w, printk 1859 drivers/video/fbdev/neofb.c printk(KERN_DEBUG "GR %p: %p\n", (void *) w, printk 2065 drivers/video/fbdev/neofb.c printk(KERN_ERR "neofb: Unable to find usable video mode.\n"); printk 2084 drivers/video/fbdev/neofb.c printk(KERN_INFO "neofb v" NEOFB_VERSION printk 91 drivers/video/fbdev/nvidia/nv_accel.c printk("nvidiafb: DMA Flush lockup\n"); printk 104 drivers/video/fbdev/nvidia/nv_accel.c printk("nvidiafb: DMA Sync lockup\n"); printk 139 drivers/video/fbdev/nvidia/nv_accel.c printk("DMA Get lockup\n"); printk 152 drivers/video/fbdev/nvidia/nv_accel.c printk("nvidiafb: DMA Wait Lockup\n"); printk 111 drivers/video/fbdev/nvidia/nv_backlight.c printk(KERN_WARNING "nvidia: Backlight registration failed\n"); printk 124 drivers/video/fbdev/nvidia/nv_backlight.c printk("nvidia: Backlight initialized (%s)\n", name); printk 136 drivers/video/fbdev/nvidia/nv_backlight.c printk("nvidia: Backlight unloaded\n"); printk 734 drivers/video/fbdev/nvidia/nv_hw.c printk("nvidiafb: your nForce DIMMs are not arranged " printk 75 drivers/video/fbdev/nvidia/nv_of.c printk(KERN_DEBUG "nvidiafb: Found OF EDID for head %d\n", conn); printk 172 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC%i analog found\n", output); printk 174 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC%i analog not found\n", output); printk 405 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: EDID found from BUS1\n"); printk 423 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: HW is currently programmed for %s\n", printk 432 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Forcing display type to %s as " printk 493 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: EDID found from BUS1\n"); printk 501 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: EDID found from BUS2\n"); printk 509 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC 0 is currently programmed for " printk 514 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC 1 is currently programmed " printk 519 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC %i appears to have a " printk 524 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC %i appears to have a " printk 530 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC 0 is currently programmed " printk 536 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: CRTC 1 is currently programmed for " printk 549 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Unable to detect display " printk 552 drivers/video/fbdev/nvidia/nv_setup.c printk("...On a laptop, assuming " printk 556 drivers/video/fbdev/nvidia/nv_setup.c printk("...Using default of CRT\n"); printk 561 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Forcing display type to %s as " printk 569 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Unable to detect which " printk 575 drivers/video/fbdev/nvidia/nv_setup.c printk("...Defaulting to CRTCNumber %i\n", printk 579 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Forcing CRTCNumber %i as " printk 619 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Using %s on CRTC %i\n", printk 628 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Panel size is %i x %i\n", par->fpWidth, par->fpHeight); printk 642 drivers/video/fbdev/nvidia/nv_setup.c printk("nvidiafb: Panel is %s\n", par->LVDS ? "LVDS" : "TMDS"); printk 34 drivers/video/fbdev/nvidia/nvidia.c #define NVTRACE printk printk 36 drivers/video/fbdev/nvidia/nvidia.c #define NVTRACE if (0) printk printk 45 drivers/video/fbdev/nvidia/nvidia.c printk( "Assertion failed! %s,%s,%s,line=%d\n",\ printk 259 drivers/video/fbdev/nvidia/nvidia.c printk(" SEQ[%02x] = %08x\n", i, state->seq[i]); printk 274 drivers/video/fbdev/nvidia/nvidia.c printk("CRTC[%02x] = %08x\n", i, state->crtc[i]); printk 282 drivers/video/fbdev/nvidia/nvidia.c printk(" GRA[%02x] = %08x\n", i, state->gra[i]); printk 289 drivers/video/fbdev/nvidia/nvidia.c printk("ATTR[%02x] = %08x\n", i, state->attr[i]); printk 626 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_INFO PFX "Flat panel dithering %s\n", printk 857 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "mode out of range of flat " printk 890 drivers/video/fbdev/nvidia/nvidia.c printk("nvidiafb: required video memory, " printk 1200 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_INFO PFX "Device ID: %x \n", id); printk 1212 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_INFO PFX "Subsystem ID: %x \n", id); printk 1293 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "cannot enable PCI device\n"); printk 1298 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "cannot request PCI regions\n"); printk 1304 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_INFO PFX "flatpanel support enabled\n"); printk 1324 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "cannot ioremap MMIO base\n"); printk 1332 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "unknown NV_ARCH\n"); printk 1365 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "cannot ioremap FB base\n"); printk 1379 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "error setting initial video mode\n"); printk 1391 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_ERR PFX "error registering nVidia framebuffer\n"); printk 1396 drivers/video/fbdev/nvidia/nvidia.c printk(KERN_INFO PFX printk 404 drivers/video/fbdev/offb.c printk(KERN_INFO printk 408 drivers/video/fbdev/offb.c printk(KERN_ERR "%pOF: can't use depth = %d\n", dp, depth); printk 574 drivers/video/fbdev/omap2/omapfb/dss/dsi.c printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " printk 1134 drivers/video/fbdev/omap2/omapfb/dss/dss.c printk(KERN_INFO "OMAP DSS rev %d.%d\n", printk 32 drivers/video/fbdev/omap2/omapfb/dss/dss.h printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \ printk 36 drivers/video/fbdev/omap2/omapfb/dss/dss.h printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__) printk 41 drivers/video/fbdev/omap2/omapfb/dss/dss.h printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \ printk 45 drivers/video/fbdev/omap2/omapfb/dss/dss.h printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__) printk 50 drivers/video/fbdev/omap2/omapfb/dss/dss.h printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \ printk 54 drivers/video/fbdev/omap2/omapfb/dss/dss.h printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__) printk 29 drivers/video/fbdev/omap2/omapfb/omapfb.h printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__); \ printk 238 drivers/video/fbdev/omap2/omapfb/vrfb.c printk(KERN_ERR "vrfb: ioremap failed\n"); printk 308 drivers/video/fbdev/p9100.c printk(KERN_INFO "%pOF: p9100 at %lx:%lx\n", printk 128 drivers/video/fbdev/platinumfb.c printk (KERN_ERR "platinumfb_set_par: error calling" printk 148 drivers/video/fbdev/platinumfb.c printk("line_length: %x\n", info->fix.line_length); printk 347 drivers/video/fbdev/platinumfb.c printk(KERN_INFO "platinumfb: Monitor sense value = 0x%x, ", sense); printk 369 drivers/video/fbdev/platinumfb.c printk("platinumfb: Using video mode %d and color mode %d.\n", default_vmode, default_cmode); printk 374 drivers/video/fbdev/platinumfb.c printk("mac_vmode_to_var(%d, %d,) failed\n", default_vmode, default_cmode); printk 379 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinumfb: mac_vmode_to_var() failed\n"); printk 446 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: mac_var_to_vmode unsuccessful.\n"); printk 447 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->xres = %d\n", var->xres); printk 448 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->yres = %d\n", var->yres); printk 449 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->xres_virtual = %d\n", var->xres_virtual); printk 450 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->yres_virtual = %d\n", var->yres_virtual); printk 451 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->bits_per_pixel = %d\n", var->bits_per_pixel); printk 452 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->pixclock = %d\n", var->pixclock); printk 453 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par: var->vmode = %d\n", var->vmode); printk 458 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par, vmode %d not valid.\n", vmode); printk 463 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinum_var_to_par, not enough ram for vmode %d, cmode %d.\n", vmode, cmode); printk 565 drivers/video/fbdev/platinumfb.c printk(KERN_ERR "platinumfb: Can't request framebuffer !\n"); printk 603 drivers/video/fbdev/platinumfb.c printk(KERN_INFO "platinumfb: Total VRAM = %dMB (%d%d%d%d)\n", printk 615 drivers/video/fbdev/platinumfb.c printk(KERN_INFO "platinumfb: DACula type 0x3c\n"); printk 619 drivers/video/fbdev/platinumfb.c printk(KERN_INFO "platinumfb: DACula type 0x84\n"); printk 623 drivers/video/fbdev/platinumfb.c printk(KERN_INFO "platinumfb: Unknown DACula type: %x\n", pinfo->dactype); printk 55 drivers/video/fbdev/pm2fb.c printk(KERN_DEBUG "pm2fb: %s: " a, __func__ , ## b) printk 1522 drivers/video/fbdev/pm2fb.c printk(KERN_WARNING "pm2fb: Can't enable pdev: %d\n", err); printk 1562 drivers/video/fbdev/pm2fb.c printk(KERN_WARNING "pm2fb: Can't reserve regbase.\n"); printk 1568 drivers/video/fbdev/pm2fb.c printk(KERN_WARNING "pm2fb: Can't remap %s register area.\n", printk 1631 drivers/video/fbdev/pm2fb.c printk(KERN_WARNING "pm2fb: Can't reserve smem.\n"); printk 1637 drivers/video/fbdev/pm2fb.c printk(KERN_WARNING "pm2fb: Can't ioremap smem area.\n"); printk 1667 drivers/video/fbdev/pm2fb.c printk(KERN_DEBUG "disabling acceleration\n"); printk 45 drivers/video/fbdev/pm3fb.c printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b) printk 1235 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't reserve smem.\n"); printk 1241 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n"); printk 1320 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err); printk 1346 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n"); printk 1352 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n", printk 1362 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't find memory on board.\n"); printk 1367 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't reserve smem.\n"); printk 1373 drivers/video/fbdev/pm3fb.c printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n"); printk 1396 drivers/video/fbdev/pm3fb.c printk(KERN_DEBUG "disabling acceleration\n"); printk 183 drivers/video/fbdev/pmag-aa-fb.c printk(KERN_ERR "%s: Cannot reserve FB region\n", printk 193 drivers/video/fbdev/pmag-aa-fb.c printk(KERN_ERR "%s: Cannot map MMIO\n", dev_name(dev)); printk 205 drivers/video/fbdev/pmag-aa-fb.c printk(KERN_ERR "%s: Cannot map FB\n", dev_name(dev)); printk 221 drivers/video/fbdev/pmag-aa-fb.c printk(KERN_ERR "%s: Cannot register framebuffer\n", printk 160 drivers/video/fbdev/pmag-ba-fb.c printk(KERN_ERR "%s: Cannot allocate color map\n", printk 175 drivers/video/fbdev/pmag-ba-fb.c printk(KERN_ERR "%s: Cannot reserve FB region\n", printk 185 drivers/video/fbdev/pmag-ba-fb.c printk(KERN_ERR "%s: Cannot map MMIO\n", dev_name(dev)); printk 196 drivers/video/fbdev/pmag-ba-fb.c printk(KERN_ERR "%s: Cannot map FB\n", dev_name(dev)); printk 206 drivers/video/fbdev/pmag-ba-fb.c printk(KERN_ERR "%s: Cannot register framebuffer\n", printk 267 drivers/video/fbdev/pmagb-b-fb.c printk(KERN_ERR "%s: Cannot allocate color map\n", printk 282 drivers/video/fbdev/pmagb-b-fb.c printk(KERN_ERR "%s: Cannot reserve FB region\n", printk 292 drivers/video/fbdev/pmagb-b-fb.c printk(KERN_ERR "%s: Cannot map MMIO\n", dev_name(dev)); printk 303 drivers/video/fbdev/pmagb-b-fb.c printk(KERN_ERR "%s: Cannot map FB\n", dev_name(dev)); printk 317 drivers/video/fbdev/pmagb-b-fb.c printk(KERN_ERR "%s: Cannot register framebuffer\n", printk 777 drivers/video/fbdev/pvr2fb.c printk(KERN_ERR "pvr2fb: Failed to remap smem space\n"); printk 784 drivers/video/fbdev/pvr2fb.c printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n"); printk 935 drivers/video/fbdev/pvr2fb.c printk(KERN_ERR "pvr2fb: PCI enable failed\n"); printk 941 drivers/video/fbdev/pvr2fb.c printk(KERN_ERR "pvr2fb: PCI request regions failed\n"); printk 1087 drivers/video/fbdev/pvr2fb.c printk(KERN_ERR "pvr2fb: Failed init of %s device\n", printk 125 drivers/video/fbdev/pxa3xx-gcu.c printk(level "%lld.%03ld.%03ld - %-17s: %-21s (%s, " \ printk 177 drivers/video/fbdev/pxa3xx-gcu.c printk(KERN_DEBUG "== PXA3XX-GCU DUMP ==\n" printk 116 drivers/video/fbdev/q40fb.c printk(KERN_ERR "Unable to register Q40 frame buffer\n"); printk 61 drivers/video/fbdev/riva/fbdev.c #define NVTRACE printk printk 63 drivers/video/fbdev/riva/fbdev.c #define NVTRACE if(0) printk printk 72 drivers/video/fbdev/riva/fbdev.c printk( "Assertion failed! %s,%s,%s,line=%d\n",\ printk 349 drivers/video/fbdev/riva/fbdev.c printk(KERN_WARNING "riva: Backlight registration failed\n"); printk 362 drivers/video/fbdev/riva/fbdev.c printk("riva: Backlight initialized (%s)\n", name); printk 375 drivers/video/fbdev/riva/fbdev.c printk("riva: Backlight unloaded\n"); printk 883 drivers/video/fbdev/riva/fbdev.c printk(KERN_WARNING PFX printk 891 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX printk 899 drivers/video/fbdev/riva/fbdev.c printk(KERN_INFO PFX printk 905 drivers/video/fbdev/riva/fbdev.c printk(KERN_WARNING PFX printk 911 drivers/video/fbdev/riva/fbdev.c printk(KERN_WARNING PFX printk 916 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX printk 925 drivers/video/fbdev/riva/fbdev.c printk(KERN_WARNING PFX printk 932 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX printk 938 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX printk 1136 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX printk 1707 drivers/video/fbdev/riva/fbdev.c printk(KERN_DEBUG PFX "disabling acceleration\n"); printk 1775 drivers/video/fbdev/riva/fbdev.c printk(PFX "Found EDID Block from BUS %i\n", i); printk 1826 drivers/video/fbdev/riva/fbdev.c printk(PFX "could not retrieve EDID from OF\n"); printk 1829 drivers/video/fbdev/riva/fbdev.c printk(PFX "could not retrieve EDID from DDC/I2C\n"); printk 1919 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "cannot enable PCI device\n"); printk 1925 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "cannot request PCI regions\n"); printk 1933 drivers/video/fbdev/riva/fbdev.c printk(KERN_INFO PFX "nVidia device/chipset %X\n",default_par->Chipset); printk 1936 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "unknown NV_ARCH\n"); printk 1950 drivers/video/fbdev/riva/fbdev.c printk(KERN_INFO PFX "flatpanel support enabled\n"); printk 1971 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "cannot ioremap MMIO base\n"); printk 1984 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "cannot ioremap PRAMIN region\n"); printk 2011 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "cannot ioremap FB base\n"); printk 2028 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX "error setting initial video mode\n"); printk 2042 drivers/video/fbdev/riva/fbdev.c printk(KERN_ERR PFX printk 2047 drivers/video/fbdev/riva/fbdev.c printk(KERN_INFO PFX printk 88 drivers/video/fbdev/riva/nv_driver.c printk(KERN_INFO PFX printk 93 drivers/video/fbdev/riva/nv_driver.c printk(KERN_INFO PFX printk 368 drivers/video/fbdev/riva/nv_driver.c printk(KERN_INFO PFX printk 46 drivers/video/fbdev/s1d13xxxfb.c #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0) printk 55 drivers/video/fbdev/s1d13xxxfb.c #define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0) printk 655 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n"); printk 766 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_INFO "Epson S1D13XXX FB Driver\n"); printk 815 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_ERR PFX "unable to map registers\n"); printk 825 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_ERR PFX "unable to map framebuffer\n"); printk 847 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_INFO PFX "chip production id %i = %s\n", printk 849 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_INFO PFX "chip revision %i\n", revision); printk 851 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_INFO PFX printk 854 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_INFO PFX "please contact maintainer\n"); printk 864 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n", printk 922 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_ERR PFX "no memory to save screen\n"); printk 935 drivers/video/fbdev/s1d13xxxfb.c printk(KERN_ERR PFX "no memory to save registers"); printk 22 drivers/video/fbdev/savage/savagefb.h # define DBG(x) printk (KERN_DEBUG "savagefb: %s\n", (x)); printk 425 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_ERR "invalid frequency %ld Khz\n", freq); printk 429 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_ERR "invalid frequency %ld Khz\n", freq); printk 514 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE " printk 519 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG "\nSR%xx ", i >> 4); printk 521 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG " %02x", vga_in8(0x3c5, par)); printk 524 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG "\n\nCR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC " printk 529 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG "\nCR%xx ", i >> 4); printk 531 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg, par)); printk 534 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_DEBUG "\n\n"); printk 931 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "Mode (%dx%d) larger than the LCD panel " printk 1730 drivers/video/fbdev/savage/savagefb_driver.c printk("savagefb: unable to map memory mapped IO\n"); printk 1733 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb: mapped io at %p\n", printk 1777 drivers/video/fbdev/savage/savagefb_driver.c printk("savagefb: unable to map screen memory\n"); printk 1780 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb: mapped framebuffer at %p, " printk 1889 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb: probed videoram: %dk\n", videoRam); printk 1936 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n", printk 1951 drivers/video/fbdev/savage/savagefb_driver.c printk("savagefb: Digital Flat Panel Detected\n"); printk 2001 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n", printk 2011 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb: Limiting video mode to " printk 2188 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_ERR "cannot request PCI regions\n"); printk 2234 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_WARNING "No CVT mode found for panel\n"); printk 2287 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": " printk 2301 drivers/video/fbdev/savage/savagefb_driver.c printk(KERN_INFO "fb: S3 %s frame buffer device\n", printk 386 drivers/video/fbdev/sh7760fb.c printk(KERN_ERR "colinfo\n"); printk 533 drivers/video/fbdev/sh7760fb.c printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n", printk 1476 drivers/video/fbdev/sis/init301.c printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n", printk 2464 drivers/video/fbdev/sis/init301.c printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n", printk 56 drivers/video/fbdev/sis/initextlfb.c printk(KERN_ERR "Could not find mode %x\n", ModeNo); printk 33 drivers/video/fbdev/sis/sis.h #define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) printk 34 drivers/video/fbdev/sis/sis.h #define TWDEBUG(x) printk(KERN_INFO x "\n"); printk 40 drivers/video/fbdev/sis/sis.h #define SISFAIL(x) do { printk(x "\n"); return -EINVAL; } while(0) printk 151 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Invalid mode. Using default.\n"); printk 179 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Invalid VESA mode 0x%x'\n", vesamode); printk 193 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Internal error, using default mode.\n"); printk 201 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Mode 'none' not supported anymore. Using default.\n"); printk 256 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Invalid mode '%s'\n", nameptr); printk 278 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG printk 312 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Invalid CRT2 type: %s\n", name); printk 347 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Special timing disabled\n"); printk 354 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Special timing for %s %s forced (\"%s\")\n", printk 363 drivers/video/fbdev/sis/sis_main.c printk(KERN_WARNING "sisfb: Invalid SpecialTiming parameter, valid are:"); printk 364 drivers/video/fbdev/sis/sis_main.c printk(KERN_WARNING "\t\"none\" (to disable special timings)\n"); printk 367 drivers/video/fbdev/sis/sis_main.c printk(KERN_WARNING "\t\"%s\" (for %s %s)\n", printk 424 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Identified [%s %s], special timing applies\n", printk 427 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: [specialtiming parameter name: %s]\n", printk 445 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Bad EDID header\n"); printk 450 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: EDID version %d not supported\n", printk 459 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 557 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: CRT%d DDC probing failed\n", crtno + 1); printk 560 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: CRT%d DDC supported\n", crtno + 1); printk 561 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: CRT%d DDC level: %s%s%s%s\n", printk 575 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Monitor range H %d-%dKHz, V %d-%dHz, Max. dotclock %dMHz\n", printk 579 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: CRT%d DDC EDID corrupt\n", crtno + 1); printk 582 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: CRT%d DDC reading failed\n", crtno + 1); printk 585 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: VESA D&P and FPDI-2 not supported yet\n"); printk 755 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Unsupported rate %d for %dx%d\n", printk 1108 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Unsupported depth %d", ivideo->video_bpp); printk 1204 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Setting mode[0x%x] failed\n", ivideo->mode_no); printk 1279 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Mode %dx%dx%d not supported\n", var->xres, printk 1527 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG printk 1536 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR printk 1601 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 1740 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 1794 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 1805 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 1816 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 2122 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: YPbPr not supported\n"); printk 2131 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: HiVision not supported\n"); printk 2141 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: PALM/PALN/NTSCJ not supported\n"); printk 2480 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s %s SCART output\n", stdstr, tvstr); printk 2483 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s secondary VGA connection\n", stdstr); printk 2500 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s %s YPbPr component output\n", stdstr, tvstr); printk 2511 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s %s SVIDEO output\n", stdstr, tvstr); printk 2516 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s %s COMPOSITE output\n", stdstr, tvstr); printk 2594 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 2599 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SVIDEO output\n", stdstr); printk 2604 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s CVBS output\n", stdstr); printk 2643 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s CVBS output\n", stdstr); printk 2649 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SVIDEO output\n", stdstr); printk 2655 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SCART output\n", stdstr); printk 2684 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS301 %s\n", stdstr, bridgestr); printk 2692 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS301B-DH %s\n", stdstr, bridgestr); printk 2694 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS301B %s\n", stdstr, bridgestr); printk 2699 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS301C %s\n", stdstr, bridgestr); printk 2703 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS301LV %s\n", stdstr, bridgestr); printk 2709 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS302LV %s\n", stdstr, bridgestr); printk 2713 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS301C(P4) %s\n", stdstr, bridgestr); printk 2717 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS302ELV %s\n", stdstr, bridgestr); printk 2725 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s SiS302B %s\n", stdstr, bridgestr); printk 2791 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s LVDS transmitter\n", stdstr); printk 2794 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s Trumpion Zurac LCD scaler\n", stdstr); printk 2797 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s Chrontel TV encoder\n", stdstr); printk 2800 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "%s Conexant external device\n", stdstr); printk 2954 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Invalid panel ID (%02x), assuming 1024x768, RGB18\n", reg); printk 2979 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Detected %dx%d flat panel\n", printk 2999 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Detected LCD PDC 0x%02x\n", printk 3004 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Using LCD PDC 0x%02x\n", printk 3057 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 3062 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 3085 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Using LCD PDC 0x%02x (for LCD=CRT2)\n", printk 3090 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Using LCD PDC1 0x%02x (for LCD=CRT1)\n", printk 3190 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Memory heap starting at %dK, size %dK\n", printk 3974 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Unknown command 0x%x\n", printk 4069 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Invalid option %s\n", this_opt); printk 4174 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR printk 4183 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR printk 4508 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG printk 4672 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Unable to detect RAM size. Setting default.\n"); printk 5785 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "-----------------\n"); printk 5788 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "CR%02x(%x) = 0x%02x\n", i, SISCR, reg); printk 5792 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "SR%02x(%x) = 0x%02x\n", i, SISSR, reg); printk 5794 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "-----------------\n"); printk 5831 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR printk 5915 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: PCI device is disabled, " printk 5917 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: I will not accept this " printk 6053 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Identified [%s %s] " printk 6107 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Video ROM %sfound\n", printk 6118 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Video ROM usage disabled\n"); printk 6168 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Card is not " printk 6172 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Failed to POST card\n"); printk 6184 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Fatal error: Unable to determine VRAM size.\n"); printk 6214 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Fatal error: Unable to reserve %dMB framebuffer memory\n", printk 6216 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Is there another framebuffer driver active?\n"); printk 6222 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Fatal error: Unable to reserve MMIO region\n"); printk 6230 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Fatal error: Unable to map framebuffer memory\n"); printk 6237 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Fatal error: Unable to map MMIO region\n"); printk 6251 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Video RAM at 0x%lx, mapped to 0x%lx, size %ldk\n", printk 6255 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Viewport offset %ldk\n", printk 6259 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: MMIO at 0x%lx, mapped to 0x%lx, size %ldk\n", printk 6288 drivers/video/fbdev/sis/sis_main.c printk(KERN_WARNING "sisfb: Failed to initialize offscreen memory heap\n"); printk 6372 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "Mode %dx%dx%d failed validation\n", printk 6410 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: WARNING: Refresh rate " printk 6421 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Default mode is %dx%dx%d (%dHz)\n", printk 6480 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Initial vbflags 0x%x\n", (int)ivideo->vbflags); printk 6485 drivers/video/fbdev/sis/sis_main.c printk(KERN_ERR "sisfb: Fatal error: Failed to register framebuffer\n"); printk 6497 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: 2D acceleration is %s, y-panning %s\n", printk 6508 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO "sisfb: Copyright (C) 2001-2005 Thomas Winischhofer\n"); printk 6564 drivers/video/fbdev/sis/sis_main.c printk(KERN_INFO printk 6707 drivers/video/fbdev/sis/sis_main.c printk(KERN_DEBUG "sisfb: Module unloaded\n"); printk 362 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n", printk 382 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel); printk 398 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", printk 407 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Unsupported timings\n"); printk 415 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n", printk 420 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n", printk 428 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Unsupported timings\n"); printk 439 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Not enough video memory\n"); printk 833 drivers/video/fbdev/sstfb.c printk(KERN_INFO "supplied memsize: %#x\n", *memsize); printk 1186 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: unknown dac type.\n"); printk 1194 drivers/video/fbdev/sstfb.c printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk); printk 1197 drivers/video/fbdev/sstfb.c printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk); printk 1331 drivers/video/fbdev/sstfb.c printk(KERN_ERR "cannot enable device\n"); printk 1357 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: cannot reserve mmio memory\n"); printk 1362 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: cannot reserve fb memory\n"); printk 1369 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: cannot remap register area %#lx\n", printk 1375 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n", printk 1381 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: Init failed\n"); printk 1387 drivers/video/fbdev/sstfb.c printk(KERN_INFO "%s (revision %d) with %s dac\n", printk 1389 drivers/video/fbdev/sstfb.c printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n", printk 1414 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: invalid video mode.\n"); printk 1419 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: can't set default video mode.\n"); printk 1424 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: can't alloc cmap memory.\n"); printk 1431 drivers/video/fbdev/sstfb.c printk(KERN_ERR "sstfb: can't register framebuffer.\n"); printk 1438 drivers/video/fbdev/sstfb.c printk(KERN_WARNING "sstfb: can't create sysfs entry.\n"); printk 8 drivers/video/fbdev/sticore.h #define DPRINTK(x) printk x printk 170 drivers/video/fbdev/stifb.c printk(KERN_DEBUG "%30s: WRITE_BYTE(0x%06x) = 0x%02x (old=0x%02x)\n", \ printk 174 drivers/video/fbdev/stifb.c printk(KERN_DEBUG "%30s: WRITE_WORD(0x%06x) = 0x%08x (old=0x%08x)\n", \ printk 1154 drivers/video/fbdev/stifb.c printk(KERN_WARNING printk 1168 drivers/video/fbdev/stifb.c printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n", printk 1234 drivers/video/fbdev/stifb.c printk(KERN_WARNING printk 1241 drivers/video/fbdev/stifb.c printk(KERN_WARNING printk 1296 drivers/video/fbdev/stifb.c printk(KERN_ERR "stifb: failed to map memory\n"); printk 1309 drivers/video/fbdev/stifb.c printk(KERN_ERR "stifb: cannot reserve fb region 0x%04lx-0x%04lx\n", printk 1315 drivers/video/fbdev/stifb.c printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n", printk 1369 drivers/video/fbdev/stifb.c printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n"); printk 36 drivers/video/fbdev/sunxvr1000.c printk(KERN_ERR "gfb: Critical properties missing for %pOF\n", printk 108 drivers/video/fbdev/sunxvr1000.c printk(KERN_ERR "gfb: Cannot allocate color map.\n"); printk 153 drivers/video/fbdev/sunxvr1000.c printk("gfb: Found device at %pOF\n", dp); printk 157 drivers/video/fbdev/sunxvr1000.c printk(KERN_ERR "gfb: Could not register framebuffer %pOF\n", printk 40 drivers/video/fbdev/sunxvr2500.c printk(KERN_ERR "s3d: Critical properties missing for %s\n", printk 112 drivers/video/fbdev/sunxvr2500.c printk(KERN_ERR "s3d: Cannot allocate color map.\n"); printk 128 drivers/video/fbdev/sunxvr2500.c printk(KERN_ERR "s3d: Cannot enable PCI device %s\n", printk 144 drivers/video/fbdev/sunxvr2500.c printk(KERN_ERR "s3d: Cannot find OF node of %s\n", printk 154 drivers/video/fbdev/sunxvr2500.c printk("s3d: Cannot request region 1 for %s\n", printk 195 drivers/video/fbdev/sunxvr2500.c printk("s3d: Found device at %s\n", pci_name(pdev)); printk 199 drivers/video/fbdev/sunxvr2500.c printk(KERN_ERR "s3d: Could not register framebuffer %s\n", printk 62 drivers/video/fbdev/sunxvr500.c printk(KERN_ERR "e3d: Critical properties missing for %s\n", printk 235 drivers/video/fbdev/sunxvr500.c printk(KERN_ERR "e3d: Cannot allocate color map.\n"); printk 254 drivers/video/fbdev/sunxvr500.c printk(KERN_ERR "e3d: Cannot find OF node of %s\n", printk 261 drivers/video/fbdev/sunxvr500.c printk(KERN_INFO "e3d: Ignoring secondary output device " printk 268 drivers/video/fbdev/sunxvr500.c printk(KERN_ERR "e3d: Cannot enable PCI device %s\n", printk 296 drivers/video/fbdev/sunxvr500.c printk("e3d: Cannot request region 1 for %s\n", printk 319 drivers/video/fbdev/sunxvr500.c printk("e3d: Cannot request region 0 for %s\n", printk 359 drivers/video/fbdev/sunxvr500.c printk("e3d: Found device at %s\n", pci_name(pdev)); printk 363 drivers/video/fbdev/sunxvr500.c printk(KERN_ERR "e3d: Could not register framebuffer %s\n", printk 471 drivers/video/fbdev/tcx.c printk(KERN_INFO "%pOF: TCX at %lx:%lx, %s\n", printk 1383 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "tdfxfb: Can't enable pdev: %d\n", err); printk 1415 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "tdfxfb: Can't reserve regbase\n"); printk 1422 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "fb: Can't remap %s register area.\n", printk 1430 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "fb: Can't count %s memory.\n", info->fix.id); printk 1436 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "tdfxfb: Can't reserve smem\n"); printk 1443 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "fb: Can't remap %s framebuffer.\n", printk 1452 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "tdfxfb: Can't reserve iobase\n"); printk 1456 drivers/video/fbdev/tdfxfb.c printk(KERN_INFO "fb: %s memory = %dK\n", info->fix.id, printk 1531 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "tdfxfb: Can't allocate color map\n"); printk 1536 drivers/video/fbdev/tdfxfb.c printk(KERN_ERR "tdfxfb: can't register framebuffer\n"); printk 1413 drivers/video/fbdev/tgafb.c printk(KERN_ERR "tgafb: Cannot enable PCI device\n"); printk 1436 drivers/video/fbdev/tgafb.c printk(KERN_ERR "tgafb: cannot reserve FB region\n"); printk 1443 drivers/video/fbdev/tgafb.c printk(KERN_ERR "tgafb: Cannot map MMIO\n"); printk 1483 drivers/video/fbdev/tgafb.c printk(KERN_ERR "tgafb: Could not find valid video mode\n"); printk 1489 drivers/video/fbdev/tgafb.c printk(KERN_ERR "tgafb: Could not allocate color map\n"); printk 1497 drivers/video/fbdev/tgafb.c printk(KERN_ERR "tgafb: Could not register framebuffer\n"); printk 1575 drivers/video/fbdev/tgafb.c printk(KERN_ERR printk 225 drivers/video/fbdev/tmiofb.c printk(KERN_INFO "tmiofb: switching to waitq\n"); printk 420 drivers/video/fbdev/tmiofb.c printk(KERN_ERR "timeout waiting for blit to end!\n"); printk 834 drivers/video/fbdev/tmiofb.c printk(KERN_DEBUG "lhccr:\n"); printk 835 drivers/video/fbdev/tmiofb.c #define CCR_PR(n) printk(KERN_DEBUG "\t" #n " = \t%04x\n",\ printk 849 drivers/video/fbdev/tmiofb.c printk(KERN_DEBUG "lcr: \n"); printk 850 drivers/video/fbdev/tmiofb.c #define LCR_PR(n) printk(KERN_DEBUG "\t" #n " = \t%04x\n",\ printk 946 drivers/video/fbdev/tmiofb.c printk(KERN_INFO "tmiofb: switching to polling\n"); printk 1630 drivers/video/fbdev/tridentfb.c printk(KERN_DEBUG "disabling acceleration\n"); printk 1692 drivers/video/fbdev/tridentfb.c printk(KERN_ERR "tridentfb: could not register framebuffer\n"); printk 276 drivers/video/fbdev/valkyriefb.c printk(KERN_INFO "Monitor sense value = 0x%x\n", p->sense); printk 302 drivers/video/fbdev/valkyriefb.c printk(KERN_INFO "using video mode %d and color mode %d.\n", printk 338 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "can't find address for valkyrie\n"); printk 370 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: couldn't map resources\n"); printk 382 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: can't set default video mode\n"); printk 465 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: can't do %dx%dx%d.\n", printk 472 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: vmode %d not valid.\n", vmode); printk 477 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: cmode %d not valid.\n", cmode); printk 488 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: vmode %d does not support " printk 494 drivers/video/fbdev/valkyriefb.c printk(KERN_ERR "valkyriefb: not enough ram for vmode %d, " printk 146 drivers/video/fbdev/vermilion/cr_pll.c printk(KERN_ERR printk 153 drivers/video/fbdev/vermilion/cr_pll.c printk(KERN_ERR printk 164 drivers/video/fbdev/vermilion/cr_pll.c printk(KERN_ERR printk 172 drivers/video/fbdev/vermilion/cr_pll.c printk(KERN_ERR printk 118 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME printk 153 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME printk 247 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME printk 255 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME printk 316 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME printk 322 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME printk 331 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME ": Could not claim GPU MMIO.\n"); printk 337 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME ": Could not map GPU MMIO.\n"); printk 511 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME ": Could not find initial mode\n"); printk 521 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME ": Register framebuffer error.\n"); printk 525 drivers/video/fbdev/vermilion/vermilion.c printk("Initialized vmlfb\n"); printk 610 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": Diff failure. %d %d\n",clock_diff,clock); printk 618 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": Resolution failure.\n"); printk 622 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME printk 634 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": Invalid bpp: %d.\n", printk 723 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": Modesetting register dump:\n"); printk 724 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tHTOTAL_A : 0x%08x\n", printk 726 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tHBLANK_A : 0x%08x\n", printk 728 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tHSYNC_A : 0x%08x\n", printk 730 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tVTOTAL_A : 0x%08x\n", printk 732 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tVBLANK_A : 0x%08x\n", printk 734 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tVSYNC_A : 0x%08x\n", printk 736 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tDSPCSTRIDE : 0x%08x\n", printk 738 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tDSPCSIZE : 0x%08x\n", printk 740 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tDSPCPOS : 0x%08x\n", printk 742 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tDSPARB : 0x%08x\n", printk 744 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tDSPCADDR : 0x%08x\n", printk 746 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tBCLRPAT_A : 0x%08x\n", printk 748 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tCANVSCLR_A : 0x%08x\n", printk 750 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tPIPEASRC : 0x%08x\n", printk 752 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tPIPEACONF : 0x%08x\n", printk 754 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tDSPCCNTR : 0x%08x\n", printk 756 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": \tRCOMPSTAT : 0x%08x\n", printk 758 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": End of modesetting register dump.\n"); printk 803 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME printk 1060 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": initializing\n"); printk 1117 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_ERR MODULE_NAME printk 1128 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": Registered %s subsystem.\n", printk 1147 drivers/video/fbdev/vermilion/vermilion.c printk(KERN_DEBUG MODULE_NAME ": subsys disable pipe\n"); printk 296 drivers/video/fbdev/vesafb.c printk(KERN_WARNING printk 321 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: mode is %dx%dx%d, linelength=%d, pages=%d\n", printk 325 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: protected mode interface info at %04x:%04x\n", printk 337 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: pmi: set display start = %p, set palette = %p\n",pmi_start,pmi_pal); printk 339 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: pmi: ports = "); printk 341 drivers/video/fbdev/vesafb.c printk("%x ", pmi_base[i]); printk 342 drivers/video/fbdev/vesafb.c printk("\n"); printk 350 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: can't handle memory requests, pmi disabled\n"); printk 357 drivers/video/fbdev/vesafb.c printk(KERN_WARNING "vesafb: hardware palette is unchangeable,\n" printk 365 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: scrolling: %s using protected mode interface, yres_virtual=%d\n", printk 368 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: scrolling: redraw\n"); printk 395 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: %s: " printk 438 drivers/video/fbdev/vesafb.c printk(KERN_ERR printk 445 drivers/video/fbdev/vesafb.c printk(KERN_INFO "vesafb: framebuffer at 0x%lx, mapped to 0x%p, " printk 1310 drivers/video/fbdev/vga16fb.c printk(KERN_DEBUG "vga16fb: initializing\n"); printk 1327 drivers/video/fbdev/vga16fb.c printk(KERN_ERR "vga16fb: unable to map device\n"); printk 1332 drivers/video/fbdev/vga16fb.c printk(KERN_INFO "vga16fb: mapped to 0x%p\n", info->screen_base); printk 1357 drivers/video/fbdev/vga16fb.c printk(KERN_ERR "vga16fb: unable to allocate colormap\n"); printk 1363 drivers/video/fbdev/vga16fb.c printk(KERN_ERR "vga16fb: unable to validate variable\n"); printk 1374 drivers/video/fbdev/vga16fb.c printk(KERN_ERR "vga16fb: unable to register framebuffer\n"); printk 31 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp); printk 48 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op); printk 73 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Invalid fill rop: " printk 86 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Unsupported source " printk 95 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Unsupported destination x/y " printk 103 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Unsupported width/height " printk 119 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Unsupported source " printk 128 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Unsupported destination " printk 140 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_1: Unsupported pitch %X %X\n", printk 181 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op); printk 206 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Invalid fill rop: " printk 221 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Unsupported pitch %X %X\n", printk 229 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Unsupported width/height " printk 237 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Unsupported destination x/y " printk 245 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Unsupported destination " printk 255 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Unsupported source " printk 264 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "hw_bitblt_2: Unsupported source " printk 312 drivers/video/fbdev/via/accel.c printk(KERN_WARNING "viafb_init_accel: ioremap failed, " printk 532 drivers/video/fbdev/via/accel.c printk(KERN_ERR "viafb_wait_engine_idle: not syncing\n"); printk 15 drivers/video/fbdev/via/debug.h #define DEBUG_MSG(f, a...) printk(f, ## a) printk 22 drivers/video/fbdev/via/debug.h #define WARN_MSG(f, a...) printk(f, ## a) printk 690 drivers/video/fbdev/via/hw.c printk(KERN_WARNING "viafb: Unsupported source: %d\n", iga); printk 709 drivers/video/fbdev/via/hw.c printk(KERN_WARNING "viafb: Unsupported source: %d\n", iga); printk 882 drivers/video/fbdev/via/hw.c printk(KERN_WARNING "viafb: Unsupported polarity: %d\n", printk 292 drivers/video/fbdev/via/via-core.c printk(KERN_ERR "VIA DMA timeout!\n"); printk 367 drivers/video/fbdev/via/via-core.c printk(KERN_ERR "cannot determine framebuffer size\n"); printk 237 drivers/video/fbdev/via/via-gpio.c printk(KERN_INFO "viafb: no GPIOs configured\n"); printk 255 drivers/video/fbdev/via/via-gpio.c printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret); printk 27 drivers/video/fbdev/via/via_aux_ch7301.c printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr); printk 42 drivers/video/fbdev/via/via_aux_edid.c printk(KERN_DEBUG "EDID: %s %s\n", spec->manufacturer, spec->monitor); printk 29 drivers/video/fbdev/via/via_aux_sii164.c printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr); printk 27 drivers/video/fbdev/via/via_aux_vt1621.c printk(KERN_INFO "viafb: Found %s\n", name); printk 27 drivers/video/fbdev/via/via_aux_vt1622.c printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr); printk 27 drivers/video/fbdev/via/via_aux_vt1625.c printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr); printk 29 drivers/video/fbdev/via/via_aux_vt1631.c printk(KERN_INFO "viafb: Found %s\n", name); printk 29 drivers/video/fbdev/via/via_aux_vt1632.c printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr); printk 29 drivers/video/fbdev/via/via_aux_vt1636.c printk(KERN_INFO "viafb: Found %s\n", name); printk 260 drivers/video/fbdev/via/via_clock.c printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap); printk 265 drivers/video/fbdev/via/via_clock.c printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap); printk 270 drivers/video/fbdev/via/via_clock.c printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap); printk 275 drivers/video/fbdev/via/via_clock.c printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap); printk 43 drivers/video/fbdev/via/via_i2c.c printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n"); printk 101 drivers/video/fbdev/via/via_i2c.c printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n"); printk 239 drivers/video/fbdev/via/via_i2c.c printk(KERN_ERR "viafb: cannot create i2c bus %u:%d\n", printk 182 drivers/video/fbdev/via/via_modesetting.c printk(KERN_WARNING "via_set_primary_color_depth: " printk 209 drivers/video/fbdev/via/via_modesetting.c printk(KERN_WARNING "via_set_secondary_color_depth: " printk 399 drivers/video/fbdev/via/viafbdev.c printk(KERN_WARNING "viafb_ioctl: Please avoid this interface as it is unstable and might change or vanish at any time!\n"); printk 794 drivers/video/fbdev/via/viafbdev.c printk(KERN_WARNING "viafb_cursor: The cursor is too large " printk 1705 drivers/video/fbdev/via/viafbdev.c printk(KERN_INFO "viafb: Probing I2C bus 0x26\n"); printk 1709 drivers/video/fbdev/via/viafbdev.c printk(KERN_INFO "viafb: Probing I2C bus 0x31\n"); printk 1714 drivers/video/fbdev/via/viafbdev.c printk(KERN_INFO "viafb: Probing I2C bus 0x2C\n"); printk 1718 drivers/video/fbdev/via/viafbdev.c printk(KERN_INFO "viafb: Finished I2C bus probing"); printk 2039 drivers/video/fbdev/via/viafbdev.c printk(KERN_INFO printk 498 drivers/video/fbdev/vt8623fb.c printk(KERN_ERR "vt8623fb: unsupported mode - bug\n"); printk 116 drivers/video/fbdev/w100fb.c printk("Read Register 0x%08lX: 0x%08lX\n", regs, param); printk 128 drivers/video/fbdev/w100fb.c printk("Write Register 0x%08lX: 0x%08lX\n", regs, param); printk 153 drivers/video/fbdev/w100fb.c printk("w100fb: Using fast system clock (if possible)\n"); printk 156 drivers/video/fbdev/w100fb.c printk("w100fb: Using normal system clock\n"); printk 274 drivers/video/fbdev/w100fb.c printk(KERN_ERR "w100fb: FIFO Timeout!\n"); printk 289 drivers/video/fbdev/w100fb.c printk(KERN_ERR "w100fb: Graphic engine timeout!\n"); printk 663 drivers/video/fbdev/w100fb.c printk("Found "); printk 666 drivers/video/fbdev/w100fb.c case CHIP_ID_W100: printk("w100"); break; printk 667 drivers/video/fbdev/w100fb.c case CHIP_ID_W3200: printk("w3200"); break; printk 668 drivers/video/fbdev/w100fb.c case CHIP_ID_W3220: printk("w3220"); break; printk 670 drivers/video/fbdev/w100fb.c printk("Unknown imageon chip ID\n"); printk 674 drivers/video/fbdev/w100fb.c printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE); printk 698 drivers/video/fbdev/w100fb.c printk(KERN_ERR "No matching Xtal definition found\n"); printk 142 drivers/video/fbdev/wmt_ge_rops.c printk(KERN_INFO "Enabled support for WMT GE raster acceleration\n"); printk 222 drivers/virtio/virtio_pci_legacy.c printk(KERN_ERR "virtio_pci: expected ABI version %d, got %d\n", printk 72 drivers/vlynq/vlynq.c printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n", printk 75 drivers/vlynq/vlynq.c printk(KERN_DEBUG "VLYNQ: local %d: %08x\n", printk 77 drivers/vlynq/vlynq.c printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n", printk 88 drivers/vlynq/vlynq.c printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4); printk 89 drivers/vlynq/vlynq.c printk(KERN_DEBUG " 0x%08x", *(base + i)); printk 91 drivers/vlynq/vlynq.c printk(KERN_DEBUG "\n"); printk 251 drivers/vlynq/vlynq.c printk(KERN_ERR printk 295 drivers/vlynq/vlynq.c printk(KERN_ERR "%s: request_irq failed\n", printk 320 drivers/vlynq/vlynq.c printk(KERN_INFO "Driver found for VLYNQ " printk 324 drivers/vlynq/vlynq.c printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" printk 401 drivers/vlynq/vlynq.c printk(KERN_DEBUG printk 438 drivers/vlynq/vlynq.c printk(KERN_DEBUG printk 472 drivers/vlynq/vlynq.c printk(KERN_DEBUG "%s: using external clock\n", printk 523 drivers/vlynq/vlynq.c printk(KERN_DEBUG printk 543 drivers/vlynq/vlynq.c printk(KERN_DEBUG printk 675 drivers/vlynq/vlynq.c printk(KERN_ERR printk 694 drivers/vlynq/vlynq.c printk(KERN_ERR "%s: Can't request vlynq registers\n", printk 702 drivers/vlynq/vlynq.c printk(KERN_ERR "%s: Can't remap vlynq registers\n", printk 721 drivers/vlynq/vlynq.c printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n", printk 733 drivers/vlynq/vlynq.c printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id); printk 69 drivers/vme/vme.c printk(KERN_ERR "Unknown resource type\n"); printk 92 drivers/vme/vme.c printk(KERN_ERR "No resource\n"); printk 98 drivers/vme/vme.c printk(KERN_ERR "Can't find bridge\n"); printk 103 drivers/vme/vme.c printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); printk 108 drivers/vme/vme.c printk(KERN_ERR "alloc_consistent not supported by bridge %s\n", printk 132 drivers/vme/vme.c printk(KERN_ERR "No resource\n"); printk 138 drivers/vme/vme.c printk(KERN_ERR "Can't find bridge\n"); printk 143 drivers/vme/vme.c printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); printk 148 drivers/vme/vme.c printk(KERN_ERR "free_consistent not supported by bridge %s\n", printk 195 drivers/vme/vme.c printk(KERN_ERR "Unknown resource type\n"); printk 237 drivers/vme/vme.c printk(KERN_ERR "Invalid address space\n"); printk 301 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 311 drivers/vme/vme.c printk(KERN_ERR "Registered NULL Slave resource\n"); printk 379 drivers/vme/vme.c printk(KERN_ERR "Not a slave resource\n"); printk 386 drivers/vme/vme.c printk(KERN_ERR "Function not supported\n"); printk 392 drivers/vme/vme.c printk(KERN_ERR "Invalid attributes\n"); printk 428 drivers/vme/vme.c printk(KERN_ERR "Not a slave resource\n"); printk 435 drivers/vme/vme.c printk(KERN_ERR "vme_slave_get not supported\n"); printk 455 drivers/vme/vme.c printk(KERN_ERR "Not a slave resource\n"); printk 462 drivers/vme/vme.c printk(KERN_ERR "Can't find slave resource\n"); printk 469 drivers/vme/vme.c printk(KERN_ERR "Image is already free\n"); printk 502 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 512 drivers/vme/vme.c printk(KERN_WARNING "Registered NULL master resource\n"); printk 533 drivers/vme/vme.c printk(KERN_ERR "Can't find a suitable resource\n"); printk 583 drivers/vme/vme.c printk(KERN_ERR "Not a master resource\n"); printk 590 drivers/vme/vme.c printk(KERN_WARNING "vme_master_set not supported\n"); printk 597 drivers/vme/vme.c printk(KERN_WARNING "Invalid attributes\n"); printk 633 drivers/vme/vme.c printk(KERN_ERR "Not a master resource\n"); printk 640 drivers/vme/vme.c printk(KERN_WARNING "%s not supported\n", __func__); printk 672 drivers/vme/vme.c printk(KERN_WARNING "Reading from resource not supported\n"); printk 677 drivers/vme/vme.c printk(KERN_ERR "Not a master resource\n"); printk 686 drivers/vme/vme.c printk(KERN_WARNING "Invalid Offset\n"); printk 721 drivers/vme/vme.c printk(KERN_WARNING "Writing to resource not supported\n"); printk 726 drivers/vme/vme.c printk(KERN_ERR "Not a master resource\n"); printk 735 drivers/vme/vme.c printk(KERN_WARNING "Invalid Offset\n"); printk 772 drivers/vme/vme.c printk(KERN_WARNING "Writing to resource not supported\n"); printk 777 drivers/vme/vme.c printk(KERN_ERR "Not a master resource\n"); printk 835 drivers/vme/vme.c printk(KERN_ERR "Not a master resource\n"); printk 842 drivers/vme/vme.c printk(KERN_ERR "Can't find master resource\n"); printk 849 drivers/vme/vme.c printk(KERN_ERR "Image is already free\n"); printk 878 drivers/vme/vme.c printk(KERN_ERR "No VME resource Attribute tests done\n"); printk 882 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 891 drivers/vme/vme.c printk(KERN_ERR "Registered NULL DMA resource\n"); printk 947 drivers/vme/vme.c printk(KERN_ERR "Not a DMA resource\n"); printk 1125 drivers/vme/vme.c printk(KERN_WARNING "Link List DMA generation not supported\n"); printk 1130 drivers/vme/vme.c printk(KERN_ERR "Link List already submitted\n"); printk 1158 drivers/vme/vme.c printk(KERN_ERR "Link List DMA execution not supported\n"); printk 1187 drivers/vme/vme.c printk(KERN_WARNING "Emptying of Link Lists not supported\n"); printk 1192 drivers/vme/vme.c printk(KERN_ERR "Link List in use\n"); printk 1202 drivers/vme/vme.c printk(KERN_ERR "Unable to empty link-list entries\n"); printk 1227 drivers/vme/vme.c printk(KERN_ERR "Not a DMA resource\n"); printk 1234 drivers/vme/vme.c printk(KERN_ERR "Resource busy, can't free\n"); printk 1239 drivers/vme/vme.c printk(KERN_WARNING "Resource still processing transfers\n"); printk 1321 drivers/vme/vme.c printk(KERN_WARNING "Spurious VME interrupt, level:%x, vector:%x\n", printk 1350 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 1355 drivers/vme/vme.c printk(KERN_ERR "Invalid interrupt level\n"); printk 1360 drivers/vme/vme.c printk(KERN_ERR "Configuring interrupts not supported\n"); printk 1368 drivers/vme/vme.c printk(KERN_WARNING "VME Interrupt already taken\n"); printk 1399 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 1404 drivers/vme/vme.c printk(KERN_ERR "Invalid interrupt level\n"); printk 1409 drivers/vme/vme.c printk(KERN_ERR "Configuring interrupts not supported\n"); printk 1446 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 1451 drivers/vme/vme.c printk(KERN_WARNING "Invalid interrupt level\n"); printk 1456 drivers/vme/vme.c printk(KERN_WARNING "Interrupt generation not supported\n"); printk 1484 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 1493 drivers/vme/vme.c printk(KERN_ERR "Registered NULL Location Monitor resource\n"); printk 1548 drivers/vme/vme.c printk(KERN_ERR "Not a Location Monitor resource\n"); printk 1579 drivers/vme/vme.c printk(KERN_ERR "Not a Location Monitor resource\n"); printk 1586 drivers/vme/vme.c printk(KERN_ERR "vme_lm_set not supported\n"); printk 1615 drivers/vme/vme.c printk(KERN_ERR "Not a Location Monitor resource\n"); printk 1622 drivers/vme/vme.c printk(KERN_ERR "vme_lm_get not supported\n"); printk 1652 drivers/vme/vme.c printk(KERN_ERR "Not a Location Monitor resource\n"); printk 1659 drivers/vme/vme.c printk(KERN_ERR "vme_lm_attach not supported\n"); printk 1685 drivers/vme/vme.c printk(KERN_ERR "Not a Location Monitor resource\n"); printk 1692 drivers/vme/vme.c printk(KERN_ERR "vme_lm_detach not supported\n"); printk 1717 drivers/vme/vme.c printk(KERN_ERR "Not a Location Monitor resource\n"); printk 1754 drivers/vme/vme.c printk(KERN_ERR "Can't find VME bus\n"); printk 1759 drivers/vme/vme.c printk(KERN_WARNING "vme_slot_num not supported\n"); printk 344 drivers/w1/masters/ds2490.c printk("%s: count=%d: ", __func__, count); printk 346 drivers/w1/masters/ds2490.c printk("%02x ", buf[i]); printk 347 drivers/w1/masters/ds2490.c printk("\n"); printk 433 drivers/w1/masters/ds2490.c printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); printk 435 drivers/w1/masters/ds2490.c printk("%02x ", dev->st_buf[i]); printk 436 drivers/w1/masters/ds2490.c printk("\n"); printk 1030 drivers/w1/masters/ds2490.c printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", printk 277 drivers/xen/events/events_2l.c printk("\nvcpu %d\n ", cpu); printk 285 drivers/xen/events/events_2l.c printk("%d: masked=%d pending=%d event_sel %0*"PRI_xen_ulong"\n ", i, printk 292 drivers/xen/events/events_2l.c printk("\npending:\n "); printk 294 drivers/xen/events/events_2l.c printk("%0*"PRI_xen_ulong"%s", printk 298 drivers/xen/events/events_2l.c printk("\nglobal mask:\n "); printk 300 drivers/xen/events/events_2l.c printk("%0*"PRI_xen_ulong"%s", printk 305 drivers/xen/events/events_2l.c printk("\nglobally unmasked:\n "); printk 307 drivers/xen/events/events_2l.c printk("%0*"PRI_xen_ulong"%s", printk 312 drivers/xen/events/events_2l.c printk("\nlocal cpu%d mask:\n ", cpu); printk 314 drivers/xen/events/events_2l.c printk("%0*"PRI_xen_ulong"%s", (int)(sizeof(cpu_evtchn[0])*2), printk 318 drivers/xen/events/events_2l.c printk("\nlocally unmasked:\n "); printk 323 drivers/xen/events/events_2l.c printk("%0*"PRI_xen_ulong"%s", printk 328 drivers/xen/events/events_2l.c printk("\npending list:\n"); printk 332 drivers/xen/events/events_2l.c printk(" %d: event %d -> irq %d%s%s%s\n", printk 1207 drivers/xen/events/events_base.c printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc); printk 1444 drivers/xen/events/events_base.c printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq); printk 435 drivers/xen/grant-table.c printk("%s g.e. %#x (pfn %#lx)\n", printk 1465 drivers/xen/grant-table.c printk("Grant table initialized\n"); printk 122 drivers/xen/manage.c printk(KERN_DEBUG "suspending xenstore...\n"); printk 914 drivers/xen/privcmd.c printk(KERN_DEBUG "privcmd_fault: vma=%p %lx-%lx, pgoff=%lx, uv=%p\n", printk 158 drivers/xen/xen-pciback/conf_space.c printk(KERN_DEBUG DRV_NAME ": %s: read %d bytes at 0x%x\n", printk 199 drivers/xen/xen-pciback/conf_space.c printk(KERN_DEBUG DRV_NAME ": %s: read %d bytes at 0x%x = %x\n", printk 216 drivers/xen/xen-pciback/conf_space.c printk(KERN_DEBUG printk 71 drivers/xen/xen-pciback/conf_space_header.c printk(KERN_DEBUG DRV_NAME ": %s: enable\n", printk 80 drivers/xen/xen-pciback/conf_space_header.c printk(KERN_DEBUG DRV_NAME ": %s: disable\n", printk 89 drivers/xen/xen-pciback/conf_space_header.c printk(KERN_DEBUG DRV_NAME ": %s: set bus master\n", printk 94 drivers/xen/xen-pciback/conf_space_header.c printk(KERN_DEBUG DRV_NAME ": %s: clear bus master\n", printk 102 drivers/xen/xen-pciback/conf_space_header.c printk(KERN_DEBUG printk 114 drivers/xen/xen-pciback/conf_space_header.c printk(KERN_DEBUG printk 38 drivers/xen/xen-pciback/conf_space_quirks.c printk(KERN_DEBUG DRV_NAME printk 151 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: enable MSI\n", pci_name(dev)); printk 173 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: MSI: %d\n", pci_name(dev), printk 188 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: disable MSI\n", printk 202 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: MSI: %d\n", pci_name(dev), printk 217 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n", printk 252 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: " \ printk 277 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: disable MSI-X\n", printk 295 drivers/xen/xen-pciback/pciback_ops.c printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n", printk 307 drivers/xen/xenbus/xenbus_probe_frontend.c printk("\n"); printk 341 drivers/xen/xenbus/xenbus_probe_frontend.c printk(KERN_DEBUG "XENBUS: backend %s %s\n", printk 364 drivers/xen/xenbus/xenbus_probe_frontend.c printk(KERN_DEBUG "XENBUS: backend %s %s\n", printk 416 drivers/xen/xenbus/xenbus_probe_frontend.c printk(KERN_DEBUG "XENBUS: frontend %s %s\n", printk 110 fs/adfs/dir.c printk(KERN_INFO "adfs_dir_update: object %06x in dir %06x\n", printk 104 fs/adfs/map.c printk(KERN_ERR "adfs: oversized fragment 0x%x at 0x%x-0x%x\n", printk 178 fs/adfs/map.c printk(KERN_ERR "adfs: undersized free fragment\n"); printk 182 fs/adfs/map.c printk(KERN_ERR "adfs: oversized free fragment\n"); printk 33 fs/adfs/super.c printk(KERN_CRIT "ADFS-fs error (device %s)%s%s: %pV\n", printk 48 fs/adfs/super.c printk("%sADFS-fs (%s): %pV\n", pfx, sb->s_id, &vaf); printk 204 fs/afs/cell.c printk(KERN_ERR "kAFS: bad VL server IP address\n"); printk 135 fs/afs/dir.c printk("kAFS: %s(%lx): bad magic %d/%d is %04hx\n", printk 1103 fs/afs/dir.c printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n", printk 317 fs/afs/flock.c printk(KERN_WARNING "AFS:" printk 1449 fs/afs/internal.h printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__) printk 1498 fs/afs/internal.h printk(KERN_ERR "\n"); \ printk 1499 fs/afs/internal.h printk(KERN_ERR "AFS: Assertion failed\n"); \ printk 1507 fs/afs/internal.h printk(KERN_ERR "\n"); \ printk 1508 fs/afs/internal.h printk(KERN_ERR "AFS: Assertion failed\n"); \ printk 1509 fs/afs/internal.h printk(KERN_ERR "%lu " #OP " %lu is false\n", \ printk 1511 fs/afs/internal.h printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \ printk 1520 fs/afs/internal.h printk(KERN_ERR "\n"); \ printk 1521 fs/afs/internal.h printk(KERN_ERR "AFS: Assertion failed\n"); \ printk 1522 fs/afs/internal.h printk(KERN_ERR "%lu "#OP1" %lu "#OP2" %lu is false\n", \ printk 1525 fs/afs/internal.h printk(KERN_ERR "0x%lx "#OP1" 0x%lx "#OP2" 0x%lx is false\n", \ printk 1535 fs/afs/internal.h printk(KERN_ERR "\n"); \ printk 1536 fs/afs/internal.h printk(KERN_ERR "AFS: Assertion failed\n"); \ printk 1544 fs/afs/internal.h printk(KERN_ERR "\n"); \ printk 1545 fs/afs/internal.h printk(KERN_ERR "AFS: Assertion failed\n"); \ printk 1546 fs/afs/internal.h printk(KERN_ERR "%lu " #OP " %lu is false\n", \ printk 1548 fs/afs/internal.h printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \ printk 170 fs/afs/main.c printk(KERN_INFO "kAFS: Red Hat AFS client v0.1 registering.\n"); printk 222 fs/afs/main.c printk(KERN_ERR "kAFS: failed to register: %d\n", ret); printk 236 fs/afs/main.c printk(KERN_INFO "kAFS: Red Hat AFS client v0.1 unregistering.\n"); printk 143 fs/afs/proc.c printk("kAFS: Invalid Command on /proc/fs/afs/cells file\n"); printk 117 fs/afs/super.c printk(KERN_NOTICE "kAFS: Failed to allocate inode cache\n"); printk 144 fs/afs/super.c printk("kAFS: %d active inode objects still present\n", printk 240 fs/afs/super.c printk(KERN_ERR "kAFS: no volume name specified\n"); printk 250 fs/afs/super.c printk(KERN_ERR "kAFS: unparsable volume name\n"); printk 330 fs/afs/vl_list.c printk(KERN_DEBUG "DNS: at %zu\n", (const void *)b - buffer); printk 741 fs/afs/write.c printk(KERN_INFO printk 53 fs/bfs/bfs.h printk(KERN_ERR "BFS-fs: %s(): " format, __func__, ## args) printk 204 fs/binfmt_aout.c printk(KERN_NOTICE "executable not page aligned\n"); printk 209 fs/binfmt_aout.c printk(KERN_WARNING printk 297 fs/binfmt_aout.c printk(KERN_WARNING printk 46 fs/binfmt_elf_fdpic.c #define kdebug(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ ) printk 52 fs/binfmt_elf_fdpic.c #define kdcore(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ ) printk 394 fs/binfmt_elf_fdpic.c printk(KERN_ERR "Unable to load interpreter\n"); printk 905 fs/binfmt_elf_fdpic.c printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%lu)\n", printk 1785 fs/binfmt_elf_fdpic.c printk(KERN_WARNING printk 1403 fs/block_dev.c printk(KERN_WARNING "VFS: busy inodes on changed media or " printk 1429 fs/block_dev.c printk(KERN_INFO printk 2541 fs/btrfs/check-integrity.c printk("[...]\n"); printk 2544 fs/btrfs/check-integrity.c printk(buf); printk 2547 fs/btrfs/check-integrity.c printk("\n"); printk 2552 fs/btrfs/check-integrity.c printk(" [...]\n"); printk 2559 fs/btrfs/check-integrity.c printk(" "); printk 2568 fs/btrfs/check-integrity.c printk("[...]\n"); printk 2573 fs/btrfs/check-integrity.c printk(buf); printk 33 fs/btrfs/rcu-string.h printk(fmt, __VA_ARGS__); \ printk 217 fs/btrfs/super.c printk("%sBTRFS %s (device %s): %pV\n", lvl, type, printk 70 fs/btrfs/tests/btrfs-tests.c printk(KERN_ERR "btrfs: cannot register test file system\n"); printk 76 fs/btrfs/tests/btrfs-tests.c printk(KERN_ERR "btrfs: cannot mount test file system\n"); printk 50 fs/btrfs/tests/extent-io-tests.c printk(KERN_ERR printk 234 fs/buffer.c printk("__find_get_block_slow() failed. block=%llu, " printk 502 fs/buffer.c printk(KERN_WARNING "Emergency Thaw on %pg\n", sb->s_bdev); printk 1010 fs/buffer.c printk(KERN_ERR "%s: requested out-of-range block %llu for " printk 1028 fs/buffer.c printk(KERN_ERR "getblk(): invalid block size %d requested\n", printk 1030 fs/buffer.c printk(KERN_ERR "logical block size: %d\n", printk 3310 fs/buffer.c printk(KERN_INFO printk 3313 fs/buffer.c printk(KERN_INFO "Fix your initscripts?\n"); printk 280 fs/cachefiles/internal.h printk(KERN_DEBUG "[%-6.6s] "FMT"\n", current->comm, ##__VA_ARGS__) printk 59 fs/cifs/cifsroot.c printk(KERN_ERR "Root-CIFS: UNC path too long\n"); printk 69 fs/cifs/cifsroot.c printk(KERN_ERR "Root-CIFS: mount options string too long\n"); printk 86 fs/cifs/cifsroot.c printk(KERN_ERR "Root-CIFS: no SMB server address\n"); printk 634 fs/coredump.c printk(KERN_WARNING "format_corename failed\n"); printk 635 fs/coredump.c printk(KERN_WARNING "Aborting core\n"); printk 655 fs/coredump.c printk(KERN_WARNING printk 658 fs/coredump.c printk(KERN_WARNING "Aborting core\n"); printk 665 fs/coredump.c printk(KERN_WARNING "Pid %d(%s) over core_pipe_limit\n", printk 667 fs/coredump.c printk(KERN_WARNING "Skipping core dump\n"); printk 674 fs/coredump.c printk(KERN_WARNING "%s failed to allocate memory\n", printk 692 fs/coredump.c printk(KERN_INFO "Core dump to |%s pipe failed\n", printk 705 fs/coredump.c printk(KERN_WARNING "Pid %d(%s) can only dump core "\ printk 708 fs/coredump.c printk(KERN_WARNING "Skipping core dump\n"); printk 469 fs/crypto/crypto.c printk("%sfscrypt (%s, inode %lu): %pV\n", printk 472 fs/crypto/crypto.c printk("%sfscrypt: %pV\n", level, &vaf); printk 1586 fs/dcache.c printk(KERN_ERR "BUG: Dentry %p{i=%lx,n=%pd} " printk 790 fs/dlm/config.c printk(KERN_ERR "dlm: zero members_count\n"); printk 62 fs/dlm/dlm_internal.h printk(KERN_ERR "dlm: "fmt"\n" , ##args) printk 64 fs/dlm/dlm_internal.h printk(KERN_ERR "dlm: %s: " fmt "\n", (ls)->ls_name , ##args) printk 69 fs/dlm/dlm_internal.h printk(KERN_INFO "dlm: %s: " fmt "\n", \ printk 72 fs/dlm/dlm_internal.h printk(KERN_DEBUG "dlm: %s: " fmt "\n", \ printk 79 fs/dlm/dlm_internal.h printk(KERN_DEBUG "dlm: %s: " fmt "\n", \ printk 94 fs/dlm/dlm_internal.h printk(KERN_ERR "\nDLM: Assertion failed on line %d of file %s\n" \ printk 99 fs/dlm/dlm_internal.h printk("\n"); \ printk 162 fs/dlm/lock.c printk(KERN_ERR "lkb: nodeid %d id %x remid %x exflags %x flags %x " printk 172 fs/dlm/lock.c printk(KERN_ERR "rsb: nodeid %d master %d dir %d flags %lx first %x " printk 185 fs/dlm/lock.c printk(KERN_ERR "rsb: root_list empty %d recover_list empty %d\n", printk 187 fs/dlm/lock.c printk(KERN_ERR "rsb lookup list\n"); printk 190 fs/dlm/lock.c printk(KERN_ERR "rsb grant queue:\n"); printk 193 fs/dlm/lock.c printk(KERN_ERR "rsb convert queue:\n"); printk 196 fs/dlm/lock.c printk(KERN_ERR "rsb wait queue:\n"); printk 1342 fs/dlm/lock.c DLM_ASSERT(0, dlm_print_lkb(lkb); printk("sts=%d\n", status);); printk 1486 fs/dlm/lock.c printk("wait_count %d\n", lkb->lkb_wait_count);); printk 250 fs/dlm/lockspace.c printk(KERN_WARNING "%s: can not create kset\n", __func__); printk 816 fs/dlm/lowcomms.c printk("Extra connection from node %d attempted\n", nodeid); printk 935 fs/dlm/lowcomms.c printk("Extra connection from node %d attempted\n", nodeid); printk 52 fs/dlm/main.c printk("DLM installed\n"); printk 418 fs/dlm/member.c DLM_ASSERT(x < total, printk("total %d x %d\n", total, x);); printk 61 fs/dlm/netlink.c printk("user_cmd nlpid %u\n", listener_nlportid); printk 465 fs/dlm/user.c printk(KERN_DEBUG "dlm: process %s (%d) version mismatch " printk 83 fs/ecryptfs/crypto.c printk(KERN_ERR printk 426 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error attempting to crypt page with " printk 480 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error encrypting extent; " printk 553 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error encrypting extent; " printk 736 fs/ecryptfs/crypto.c printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc); printk 804 fs/ecryptfs/crypto.c printk(KERN_ERR "Error attempting to copy mount-wide key sigs " printk 1106 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error attempting to write header " printk 1174 fs/ecryptfs/crypto.c printk(KERN_ERR "Key is invalid; bailing out\n"); printk 1179 fs/ecryptfs/crypto.c printk(KERN_WARNING "%s: Encrypted flag not set\n", printk 1189 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Out of memory\n", __func__); printk 1197 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error whilst writing headers; rc = [%d]\n", printk 1208 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error writing metadata out to lower file; " printk 1238 fs/ecryptfs/crypto.c printk(KERN_WARNING "Invalid header size: [%zd]\n", printk 1357 fs/ecryptfs/crypto.c printk(KERN_INFO "Error attempting to read the [%s] " printk 1430 fs/ecryptfs/crypto.c printk(KERN_DEBUG "Valid eCryptfs headers not found in " printk 1440 fs/ecryptfs/crypto.c printk(KERN_DEBUG "Valid eCryptfs headers not found in " printk 1449 fs/ecryptfs/crypto.c printk(KERN_WARNING "Attempt to access file with " printk 1494 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error attempting to get packet " printk 1514 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error attempting to generate " printk 1524 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: No support for requested filename " printk 1574 fs/ecryptfs/crypto.c printk(KERN_ERR "Requested key size is [%zd] bytes; maximum " printk 1585 fs/ecryptfs/crypto.c printk(KERN_ERR "Unable to allocate crypto cipher with name " printk 1595 fs/ecryptfs/crypto.c printk(KERN_ERR "Error attempting to set key of size [%zd] for " printk 1662 fs/ecryptfs/crypto.c printk(KERN_ERR "Error attempting to initialize key TFM " printk 1728 fs/ecryptfs/crypto.c printk(KERN_ERR "Error adding new key_tfm to list; " printk 1932 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error attempting to encrypt " printk 1978 fs/ecryptfs/crypto.c printk(KERN_ERR "%s: Error attempting to encode " printk 220 fs/ecryptfs/file.c printk(KERN_ERR "%s: Error attempting to initialize " printk 229 fs/ecryptfs/file.c printk(KERN_WARNING "%s: Lower file is RO; eCryptfs " printk 279 fs/ecryptfs/file.c printk(KERN_ERR "%s: Error attempting to initialize " printk 146 fs/ecryptfs/inode.c printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc); printk 185 fs/ecryptfs/inode.c printk(KERN_ERR "%s: Failure to create dentry in lower fs; " printk 232 fs/ecryptfs/inode.c printk(KERN_ERR "%s: Error attempting to initialize " printk 240 fs/ecryptfs/inode.c printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc); printk 292 fs/ecryptfs/inode.c printk(KERN_ERR "%s: Error attempting to initialize " printk 356 fs/ecryptfs/inode.c printk(KERN_ERR "%s: Error interposing; rc = [%ld]\n", printk 403 fs/ecryptfs/inode.c printk(KERN_ERR "%s: Error attempting to encrypt and encode " printk 780 fs/ecryptfs/inode.c printk(KERN_ERR "Error attempting to zero out " printk 789 fs/ecryptfs/inode.c printk(KERN_ERR "Problem with " printk 921 fs/ecryptfs/inode.c printk(KERN_WARNING "Either the lower file " printk 367 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: message_len is [%zd]; minimum acceptable " printk 373 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Type should be ECRYPTFS_TAG_67\n", printk 379 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Status indicator has non zero " printk 394 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: message_len [%zd]; max len is [%zd]\n", printk 400 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Encrypted key_size [%zd] larger than " printk 465 fs/ecryptfs/keystore.c printk(KERN_ERR "Data structure version mismatch. Userspace " printk 474 fs/ecryptfs/keystore.c printk(KERN_ERR "Invalid auth_tok structure " printk 528 fs/ecryptfs/keystore.c printk(KERN_WARNING "Invalidating auth tok with sig = [%s]\n", sig); printk 637 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error attempting to find auth tok for " printk 646 fs/ecryptfs/keystore.c printk(KERN_ERR "Internal error whilst attempting to get " printk 679 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Require [%zd] bytes to write; only " printk 688 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Out of kernel memory whilst attempting to " printk 711 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error generating tag 70 packet " printk 725 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Unable to generate code for " printk 737 fs/ecryptfs/keystore.c printk(KERN_INFO "%s: Filename encryption only supports " printk 744 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error attempting to " printk 764 fs/ecryptfs/keystore.c printk(KERN_ERR printk 778 fs/ecryptfs/keystore.c printk(KERN_ERR printk 794 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Internal error whilst attempting to " printk 803 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Internal error whilst attempting to " printk 818 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error setting key for crypto context; " printk 831 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error attempting to encrypt filename; " printk 908 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: max_packet_size is [%zd]; it must be " printk 923 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Invalid packet tag [0x%.2x]; must be " printk 933 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Error parsing packet length; " printk 941 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: max_packet_size is [%zd]; real packet " printk 956 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Cipher code [%d] is invalid\n", printk 964 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error attempting to find auth tok for " printk 973 fs/ecryptfs/keystore.c printk(KERN_ERR "Internal error whilst attempting to get " printk 982 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Internal error whilst attempting to " printk 998 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Internal error whilst attempting to " printk 1007 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Out of kernel memory whilst attempting to " printk 1025 fs/ecryptfs/keystore.c printk(KERN_INFO "%s: Filename encryption only supports " printk 1034 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error setting key for crypto context; " printk 1047 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Error attempting to decrypt filename; " printk 1056 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Invalid tag 70 packet; could not " printk 1065 fs/ecryptfs/keystore.c printk(KERN_WARNING "%s: Filename size is [%zd], which is " printk 1110 fs/ecryptfs/keystore.c printk(KERN_ERR "Cannot get sig for auth_tok of type [%d]\n", printk 1138 fs/ecryptfs/keystore.c printk(KERN_ERR "Unrecognized auth tok type: [%d]\n", printk 1164 fs/ecryptfs/keystore.c printk(KERN_ERR "Failed to parse tag 65 packet; rc = [%d]\n", printk 1249 fs/ecryptfs/keystore.c printk(KERN_ERR "Invalid max packet size; must be >=12\n"); printk 1254 fs/ecryptfs/keystore.c printk(KERN_ERR "Enter w/ first byte != 0x%.2x\n", printk 1265 fs/ecryptfs/keystore.c printk(KERN_ERR "Unable to allocate memory\n"); printk 1273 fs/ecryptfs/keystore.c printk(KERN_WARNING "Error parsing packet length; " printk 1278 fs/ecryptfs/keystore.c printk(KERN_WARNING "Invalid body size ([%td])\n", body_size); printk 1284 fs/ecryptfs/keystore.c printk(KERN_WARNING "Packet size exceeds max\n"); printk 1289 fs/ecryptfs/keystore.c printk(KERN_WARNING "Unknown version number [%d]\n", printk 1304 fs/ecryptfs/keystore.c printk(KERN_WARNING "Tag 1 packet contains key larger " printk 1384 fs/ecryptfs/keystore.c printk(KERN_ERR "Max packet size too large\n"); printk 1389 fs/ecryptfs/keystore.c printk(KERN_ERR "First byte != 0x%.2x; invalid packet\n", printk 1399 fs/ecryptfs/keystore.c printk(KERN_ERR "Unable to allocate memory\n"); printk 1407 fs/ecryptfs/keystore.c printk(KERN_WARNING "Error parsing packet length; rc = [%d]\n", printk 1412 fs/ecryptfs/keystore.c printk(KERN_WARNING "Invalid body size ([%td])\n", body_size); printk 1418 fs/ecryptfs/keystore.c printk(KERN_ERR "Packet size exceeds max\n"); printk 1426 fs/ecryptfs/keystore.c printk(KERN_WARNING "Tag 3 packet contains key larger " printk 1432 fs/ecryptfs/keystore.c printk(KERN_WARNING "Unknown version number [%d]\n", printk 1455 fs/ecryptfs/keystore.c printk(KERN_WARNING "Only S2K ID 3 is currently supported\n"); printk 1554 fs/ecryptfs/keystore.c printk(KERN_ERR "Maximum packet size too small\n"); printk 1559 fs/ecryptfs/keystore.c printk(KERN_WARNING "Invalid tag 11 packet format\n"); printk 1566 fs/ecryptfs/keystore.c printk(KERN_WARNING "Invalid tag 11 packet format\n"); printk 1570 fs/ecryptfs/keystore.c printk(KERN_WARNING "Invalid body size ([%td])\n", body_size); printk 1577 fs/ecryptfs/keystore.c printk(KERN_ERR "Packet size exceeds max\n"); printk 1582 fs/ecryptfs/keystore.c printk(KERN_ERR "Literal data section in tag 11 packet exceeds " printk 1588 fs/ecryptfs/keystore.c printk(KERN_WARNING "Unrecognizable packet\n"); printk 1593 fs/ecryptfs/keystore.c printk(KERN_WARNING "Unrecognizable packet\n"); printk 1618 fs/ecryptfs/keystore.c printk(KERN_ERR "Could not find key with description: [%s]\n", printk 1666 fs/ecryptfs/keystore.c printk(KERN_ERR "Internal error whilst attempting to get " printk 1675 fs/ecryptfs/keystore.c printk(KERN_ERR "Internal error whilst attempting to convert " printk 1688 fs/ecryptfs/keystore.c printk(KERN_ERR "Internal error whilst attempting to convert " printk 1697 fs/ecryptfs/keystore.c printk(KERN_ERR "%s: Out of kernel memory whilst attempting to " printk 1711 fs/ecryptfs/keystore.c printk(KERN_ERR "Error setting key for crypto context\n"); printk 1721 fs/ecryptfs/keystore.c printk(KERN_ERR "Error decrypting; rc = [%d]\n", rc); printk 1851 fs/ecryptfs/keystore.c printk(KERN_ERR "The lower file appears to be a non-encrypted " printk 1875 fs/ecryptfs/keystore.c printk(KERN_ERR printk 2050 fs/ecryptfs/keystore.c printk(KERN_ERR "Failed to encrypt session key via a key " printk 2068 fs/ecryptfs/keystore.c printk(KERN_ERR "Packet length larger than maximum allowable; " printk 2128 fs/ecryptfs/keystore.c printk(KERN_ERR "Packet length larger than maximum allowable; " printk 2139 fs/ecryptfs/keystore.c printk(KERN_ERR "Error generating tag 11 packet header; cannot " printk 2199 fs/ecryptfs/keystore.c printk(KERN_ERR "Internal error whilst attempting to get " printk 2205 fs/ecryptfs/keystore.c printk(KERN_WARNING "No key size specified at mount; " printk 2310 fs/ecryptfs/keystore.c printk(KERN_ERR "Error encrypting; rc = [%d]\n", rc); printk 2333 fs/ecryptfs/keystore.c printk(KERN_ERR "Packet too large; need up to [%td] bytes, but " printk 2346 fs/ecryptfs/keystore.c printk(KERN_ERR "Error generating tag 3 packet header; cannot " printk 2428 fs/ecryptfs/keystore.c printk(KERN_WARNING "Unable to retrieve auth tok with " printk 83 fs/ecryptfs/kthread.c printk(KERN_ERR "%s: Failed to create kernel thread; rc = [%d]" printk 145 fs/ecryptfs/kthread.c printk(KERN_ERR "%s: We are in the middle of shutting down; " printk 114 fs/ecryptfs/main.c printk(KERN_ERR "Error opening lower file " printk 198 fs/ecryptfs/main.c printk(KERN_ERR "Could not find valid key in user " printk 287 fs/ecryptfs/main.c printk(KERN_ERR "Error attempting to register " printk 339 fs/ecryptfs/main.c printk(KERN_ERR "Error attempting to register " printk 380 fs/ecryptfs/main.c printk(KERN_WARNING printk 428 fs/ecryptfs/main.c printk(KERN_ERR "Error attempting to initialize " printk 446 fs/ecryptfs/main.c printk(KERN_ERR "Error attempting to initialize " printk 460 fs/ecryptfs/main.c printk(KERN_WARNING "One or more global auth toks could not " printk 528 fs/ecryptfs/main.c printk(KERN_ERR "Mount on filesystem of type " printk 536 fs/ecryptfs/main.c printk(KERN_ERR "Mount of device (uid: %d) not owned by " printk 603 fs/ecryptfs/main.c printk(KERN_ERR "%s; rc = [%d]\n", err, rc); printk 780 fs/ecryptfs/main.c printk(KERN_ERR "Unable to create ecryptfs kset\n"); printk 786 fs/ecryptfs/main.c printk(KERN_ERR printk 817 fs/ecryptfs/main.c printk(KERN_ERR printk 823 fs/ecryptfs/main.c printk(KERN_ERR "sysfs registration failed\n"); printk 828 fs/ecryptfs/main.c printk(KERN_ERR "%s: kthread initialization failed; " printk 834 fs/ecryptfs/main.c printk(KERN_ERR "Failure occurred while attempting to " printk 841 fs/ecryptfs/main.c printk(KERN_ERR "Failure whilst attempting to init crypto; " printk 847 fs/ecryptfs/main.c printk(KERN_ERR "Failed to register filesystem\n"); printk 851 fs/ecryptfs/main.c printk(KERN_CRIT "eCryptfs verbosity set to %d. Secret values " printk 875 fs/ecryptfs/main.c printk(KERN_ERR "Failure whilst attempting to destroy crypto; " printk 44 fs/ecryptfs/messaging.c printk(KERN_WARNING "%s: The eCryptfs free " printk 172 fs/ecryptfs/messaging.c printk(KERN_WARNING "%s: Warning: dropping message that is in " printk 214 fs/ecryptfs/messaging.c printk(KERN_ERR "%s: Attempt to reference " printk 224 fs/ecryptfs/messaging.c printk(KERN_WARNING "%s: Desired context element is not " printk 229 fs/ecryptfs/messaging.c printk(KERN_WARNING "%s: Invalid message sequence; " printk 275 fs/ecryptfs/messaging.c printk(KERN_WARNING "%s: Could not claim a free " printk 285 fs/ecryptfs/messaging.c printk(KERN_ERR "%s: Error attempting to send message to " printk 358 fs/ecryptfs/messaging.c printk(KERN_WARNING "%s: Specified number of users is " printk 439 fs/ecryptfs/messaging.c printk(KERN_ERR "%s: Error whilst " printk 36 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Attempt to poll on zombified " printk 77 fs/ecryptfs/miscdev.c printk(KERN_ERR "%s: Error attempting to spawn daemon; " printk 122 fs/ecryptfs/miscdev.c printk(KERN_CRIT "%s: Fatal error whilst attempting to " printk 224 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Attempt to read from zombified " printk 265 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Error writing packet length; " printk 277 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Only given user buffer of " printk 328 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: (sizeof(*msg) + msg->data_len) = " printk 336 fs/ecryptfs/miscdev.c printk(KERN_ERR printk 368 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Acceptable packet size range is " printk 376 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Error while inspecting packet size\n", printk 384 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Error parsing packet length; " printk 391 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Invalid packet size [%zu]\n", __func__, printk 399 fs/ecryptfs/miscdev.c printk(KERN_ERR "%s: memdup_user returned error [%ld]\n", printk 407 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Minimum acceptable packet " printk 422 fs/ecryptfs/miscdev.c printk(KERN_WARNING "%s: Failed to deliver miscdev " printk 478 fs/ecryptfs/miscdev.c printk(KERN_ERR "%s: Failed to register miscellaneous device " printk 143 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error reading xattr " printk 158 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error attempting to read " printk 195 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error attempting to copy " printk 208 fs/ecryptfs/mmap.c printk(KERN_ERR "Error reading page; rc = " printk 288 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error attempting to read " printk 300 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error attempting " printk 315 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error reading " printk 331 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error decrypting " printk 349 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error on attempt to " printk 393 fs/ecryptfs/mmap.c printk(KERN_ERR "%s: Error writing file size to header; " printk 413 fs/ecryptfs/mmap.c printk(KERN_WARNING printk 433 fs/ecryptfs/mmap.c printk(KERN_ERR "Error whilst attempting to write inode size " printk 515 fs/ecryptfs/mmap.c printk(KERN_ERR "Error writing inode size to metadata; " printk 137 fs/ecryptfs/read_write.c printk(KERN_ERR "%s: Error getting page at " printk 179 fs/ecryptfs/read_write.c printk(KERN_ERR "%s: Error encrypting " printk 193 fs/ecryptfs/read_write.c printk(KERN_ERR "Problem with " printk 1421 fs/eventpoll.c printk(KERN_ERR "reverse_path_check_proc: " printk 213 fs/ext2/balloc.c printk("Block Allocation Reservation Windows Map (%s):\n", fn); printk 217 fs/ext2/balloc.c printk("reservation window 0x%p " printk 221 fs/ext2/balloc.c printk("Bad reservation %p (start >= end)\n", printk 226 fs/ext2/balloc.c printk("Bad reservation %p (prev->end >= start)\n", printk 232 fs/ext2/balloc.c printk("Restarting reservation walk in verbose mode\n"); printk 240 fs/ext2/balloc.c printk("Window map complete.\n"); printk 1490 fs/ext2/balloc.c printk ("group %d: stored = %d, counted = %lu\n", printk 1495 fs/ext2/balloc.c printk("ext2_count_free_blocks: stored = %lu, computed = %lu, %lu\n", printk 668 fs/ext2/dir.c printk("kaddr=%p, de=%p\n", kaddr, de); printk 150 fs/ext2/ext2.h printk ("EXT2-fs DEBUG (%s, %d): %s:", \ printk 152 fs/ext2/ext2.h printk (f, ## a); \ printk 645 fs/ext2/ialloc.c printk("group %d: stored = %d, counted = %u\n", printk 650 fs/ext2/ialloc.c printk("ext2_count_free_inodes: stored = %lu, computed = %lu, %lu\n", printk 1629 fs/ext2/inode.c printk ("IO error syncing ext2 inode [%s:%08lx]\n", printk 70 fs/ext2/super.c printk(KERN_CRIT "EXT2-fs (%s): error: %s: %pV\n", printk 95 fs/ext2/super.c printk("%sEXT2-fs (%s): %pV\n", prefix, sb->s_id, &vaf); printk 421 fs/ext2/super.c printk("EXT2-fs: Invalid sb specification: %s\n", printk 76 fs/ext2/xattr.c printk(KERN_DEBUG "inode %s:%ld: ", \ printk 78 fs/ext2/xattr.c printk(f); \ printk 79 fs/ext2/xattr.c printk("\n"); \ printk 82 fs/ext2/xattr.c printk(KERN_DEBUG "block %pg:%lu: ", \ printk 84 fs/ext2/xattr.c printk(f); \ printk 85 fs/ext2/xattr.c printk("\n"); \ printk 721 fs/ext4/balloc.c printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n", printk 726 fs/ext4/balloc.c printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu" printk 138 fs/ext4/block_validity.c printk(KERN_INFO "System zones: "); printk 142 fs/ext4/block_validity.c printk(KERN_CONT "%s%llu-%llu", first ? "" : ", ", printk 147 fs/ext4/block_validity.c printk(KERN_CONT "\n"); printk 75 fs/ext4/ext4.h printk(KERN_DEBUG "EXT4-fs DEBUG (%s, %d): %s:", \ printk 77 fs/ext4/ext4.h printk(KERN_DEBUG f, ## a); \ printk 88 fs/ext4/ext4.h #define ext_debug(fmt, ...) printk(fmt, ##__VA_ARGS__) printk 155 fs/ext4/ext4_jbd2.c printk(KERN_ERR "EXT4-fs: %s:%d: aborting transaction: %s in %s\n", printk 775 fs/ext4/extents.c printk(KERN_DEBUG "k=%d, ix=0x%p, " printk 778 fs/ext4/extents.c printk(KERN_DEBUG "%u <= %u\n", printk 3212 fs/ext4/extents.c printk(KERN_INFO "EXT4-fs: file extents enabled" printk 3243 fs/ext4/extents.c printk(KERN_ERR "EXT4-fs: %lu blocks in %lu extents (%lu ave)\n", printk 3246 fs/ext4/extents.c printk(KERN_ERR "EXT4-fs: extents: %lu min, %lu max, max depth %lu\n", printk 183 fs/ext4/extents_status.c printk(KERN_DEBUG "status extents for inode %lu:", inode->i_ino); printk 189 fs/ext4/extents_status.c printk(KERN_DEBUG " [%u/%u) %llu %x", printk 194 fs/ext4/extents_status.c printk(KERN_DEBUG "\n"); printk 1775 fs/ext4/extents_status.c printk(KERN_DEBUG "pending reservations for inode %lu:", inode->i_ino); printk 1780 fs/ext4/extents_status.c printk(KERN_DEBUG " %u", pr->lclu); printk 1783 fs/ext4/extents_status.c printk(KERN_DEBUG "\n"); printk 19 fs/ext4/extents_status.h #define es_debug(fmt, ...) printk(fmt, ##__VA_ARGS__) printk 247 fs/ext4/ialloc.c printk(KERN_ERR "EXT4-fs: %s:%d: inode on " printk 1254 fs/ext4/ialloc.c printk(KERN_ERR "ext4_test_bit(bit=%d, block=%llu) = %d\n", printk 1258 fs/ext4/ialloc.c printk(KERN_ERR "is_bad_inode(inode)=%d\n", printk 1260 fs/ext4/ialloc.c printk(KERN_ERR "NEXT_ORPHAN(inode)=%u\n", printk 1262 fs/ext4/ialloc.c printk(KERN_ERR "max_ino=%lu\n", max_ino); printk 1263 fs/ext4/ialloc.c printk(KERN_ERR "i_nlink=%u\n", inode->i_nlink); printk 1301 fs/ext4/ialloc.c printk(KERN_DEBUG "group %lu: stored = %d, counted = %lu\n", printk 1306 fs/ext4/ialloc.c printk(KERN_DEBUG "ext4_count_free_inodes: " printk 478 fs/ext4/inode.c printk("ES cache assertion failed for inode: %lu " printk 536 fs/ext4/mballoc.c printk(KERN_EMERG \ printk 2576 fs/ext4/mballoc.c printk(KERN_EMERG printk 4160 fs/ext4/mballoc.c printk(KERN_ERR "PA:%u:%d:%u \n", i, printk 4167 fs/ext4/mballoc.c printk(KERN_ERR "%u: %d/%d \n", printk 4170 fs/ext4/mballoc.c printk(KERN_ERR "\n"); printk 34 fs/ext4/mballoc.h printk(KERN_DEBUG "(%s, %d): %s: " fmt, \ printk 598 fs/ext4/namei.c printk(KERN_DEBUG "%s index", label); printk 600 fs/ext4/namei.c printk(KERN_CONT " %x->%lu", printk 604 fs/ext4/namei.c printk(KERN_CONT "\n"); printk 623 fs/ext4/namei.c printk("names: "); printk 642 fs/ext4/namei.c printk(KERN_WARNING "Error setting up" printk 649 fs/ext4/namei.c printk("%*.s:(U)%x.%u ", len, printk 662 fs/ext4/namei.c printk(KERN_WARNING "Error " printk 670 fs/ext4/namei.c printk(KERN_WARNING "Error " printk 682 fs/ext4/namei.c printk("%*.s:(E)%x.%u ", len, name, printk 692 fs/ext4/namei.c printk("%*.s:%x.%u ", len, name, h.hash, printk 701 fs/ext4/namei.c printk(KERN_CONT "(%i)\n", names); printk 712 fs/ext4/namei.c printk("%i indexed blocks...\n", count); printk 719 fs/ext4/namei.c printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range); printk 733 fs/ext4/namei.c printk(KERN_DEBUG "%snames %u, fullness %u (%u%%)\n", printk 813 fs/ext4/namei.c dxtrace(printk("Look up %x", hash)); printk 827 fs/ext4/namei.c dxtrace(printk(KERN_CONT ".")); printk 839 fs/ext4/namei.c dxtrace(printk(KERN_CONT ",")); printk 850 fs/ext4/namei.c dxtrace(printk(KERN_CONT " %x->%u\n", printk 995 fs/ext4/namei.c dxtrace(printk(KERN_INFO "In htree dirblock_to_tree: block %lu\n", printk 1096 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "In htree_fill_tree, start hash: %x:%x\n", printk 1182 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "Fill tree: returned %d entries, " printk 1492 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "ext4_find_entry: dx failed, " printk 1670 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "%s not found\n", fname->usr_fname->name)); printk 1869 fs/ext4/namei.c dxtrace(printk(KERN_INFO "Split block %lu at %x, %i/%i\n", printk 2058 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); printk 2309 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "using %u of %u node entries\n", printk 2362 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG "Split index %i/%i\n", printk 2411 fs/ext4/namei.c dxtrace(printk(KERN_DEBUG printk 142 fs/ext4/resize.c printk(KERN_DEBUG "EXT4-fs: adding %s group %u: %u blocks " printk 380 fs/ext4/resize.c printk(KERN_DEBUG "EXT4-fs: adding a flex group with " printk 822 fs/ext4/resize.c printk(KERN_DEBUG printk 1471 fs/ext4/resize.c printk(KERN_DEBUG "EXT4-fs: added group %u:" printk 1758 fs/ext4/resize.c printk(KERN_DEBUG "EXT4-fs: extended group to %llu " printk 511 fs/ext4/super.c printk(KERN_CRIT printk 539 fs/ext4/super.c printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: " printk 544 fs/ext4/super.c printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: " printk 578 fs/ext4/super.c printk(KERN_CRIT printk 584 fs/ext4/super.c printk(KERN_CRIT printk 655 fs/ext4/super.c printk(KERN_CRIT "EXT4-fs error (device %s) in %s:%d: %s\n", printk 686 fs/ext4/super.c printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: %pV\n", printk 723 fs/ext4/super.c printk("%sEXT4-fs (%s): %pV\n", prefix, sb->s_id, &vaf); printk 743 fs/ext4/super.c printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: %pV\n", printk 760 fs/ext4/super.c printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: " printk 789 fs/ext4/super.c printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: group %u, ", printk 792 fs/ext4/super.c printk(KERN_CONT "inode %lu: ", ino); printk 794 fs/ext4/super.c printk(KERN_CONT "block %llu:", printk 796 fs/ext4/super.c printk(KERN_CONT "%pV\n", &vaf); printk 930 fs/ext4/super.c printk(KERN_ERR "sb_info orphan list:\n"); printk 933 fs/ext4/super.c printk(KERN_ERR " " printk 1579 fs/ext4/super.c printk(KERN_ERR "EXT4-fs: Invalid sb specification: %s\n", printk 2331 fs/ext4/super.c printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, " printk 3016 fs/ext4/super.c printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %llu: %.*s:%d", printk 3023 fs/ext4/super.c printk(KERN_CONT ": inode %u", printk 3026 fs/ext4/super.c printk(KERN_CONT ": block %llu", (unsigned long long) printk 3028 fs/ext4/super.c printk(KERN_CONT "\n"); printk 3031 fs/ext4/super.c printk(KERN_NOTICE "EXT4-fs (%s): last error at time %llu: %.*s:%d", printk 3038 fs/ext4/super.c printk(KERN_CONT ": inode %u", printk 3041 fs/ext4/super.c printk(KERN_CONT ": block %llu", (unsigned long long) printk 3043 fs/ext4/super.c printk(KERN_CONT "\n"); printk 3256 fs/ext4/super.c printk(KERN_CRIT "EXT4-fs: error %d creating inode table " printk 4511 fs/ext4/super.c printk(KERN_ERR "EXT4-fs: failed to create workqueue\n"); printk 6095 fs/ext4/super.c printk(KERN_WARNING printk 6124 fs/ext4/super.c printk(KERN_WARNING printk 67 fs/ext4/xattr.c printk(KERN_DEBUG "inode %s:%lu: " fmt "\n", \ printk 70 fs/ext4/xattr.c printk(KERN_DEBUG "block %pg:%lu: " fmt "\n", \ printk 220 fs/f2fs/super.c printk("%c%cF2FS-fs (%s): %pV\n", printk 3714 fs/f2fs/super.c printk("F2FS not supported on PAGE_SIZE(%lu) != %d\n", printk 56 fs/fat/misc.c printk("%sFAT-fs (%s): %pV\n", level, sb->s_id, &vaf); printk 996 fs/fcntl.c printk(KERN_ERR "kill_fasync: bad magic number in " printk 528 fs/file.c printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd); printk 46 fs/freevxfs/vxfs_bmap.c printk(KERN_DEBUG "type=%Lu ", typ->vt_hdr >> VXFS_TYPED_TYPESHIFT); printk 47 fs/freevxfs/vxfs_bmap.c printk("offset=%Lx ", typ->vt_hdr & VXFS_TYPED_OFFSETMASK); printk 48 fs/freevxfs/vxfs_bmap.c printk("block=%x ", typ->vt_block); printk 49 fs/freevxfs/vxfs_bmap.c printk("size=%x\n", typ->vt_size); printk 103 fs/freevxfs/vxfs_bmap.c printk(KERN_WARNING "no matching indir?"); printk 108 fs/freevxfs/vxfs_bmap.c printk("vxfs: indirect extent too big!\n"); printk 176 fs/freevxfs/vxfs_bmap.c printk(KERN_INFO "\n\nTYPED_DEV4 detected!\n"); printk 177 fs/freevxfs/vxfs_bmap.c printk(KERN_INFO "block: %llu\tsize: %lld\tdev: %d\n", printk 184 fs/freevxfs/vxfs_bmap.c printk(KERN_ERR "%s:%d vt_hdr %llu\n", __func__, printk 246 fs/freevxfs/vxfs_bmap.c printk(KERN_INFO "\n\nTYPED_DEV4 detected!\n"); printk 247 fs/freevxfs/vxfs_bmap.c printk(KERN_INFO "block: %llu\tsize: %lld\tdev: %d\n", printk 287 fs/freevxfs/vxfs_bmap.c printk(KERN_WARNING "vxfs: inode %ld has no valid orgtype (%x)\n", printk 292 fs/freevxfs/vxfs_bmap.c printk(KERN_WARNING "vxfs: inode %ld has an unsupported orgtype (%x)\n", printk 50 fs/freevxfs/vxfs_fshead.c printk("\n\ndumping fileset header:\n"); printk 51 fs/freevxfs/vxfs_fshead.c printk("----------------------------\n"); printk 52 fs/freevxfs/vxfs_fshead.c printk("version: %u\n", fhp->fsh_version); printk 53 fs/freevxfs/vxfs_fshead.c printk("fsindex: %u\n", fhp->fsh_fsindex); printk 54 fs/freevxfs/vxfs_fshead.c printk("iauino: %u\tninodes:%u\n", printk 56 fs/freevxfs/vxfs_fshead.c printk("maxinode: %u\tlctino: %u\n", printk 58 fs/freevxfs/vxfs_fshead.c printk("nau: %u\n", fhp->fsh_nau); printk 59 fs/freevxfs/vxfs_fshead.c printk("ilistino[0]: %u\tilistino[1]: %u\n", printk 116 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: unable to read fsh inode\n"); printk 122 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: fsh list inode is of wrong type (%x)\n", printk 128 fs/freevxfs/vxfs_fshead.c printk("vxfs: fsh inode dump:\n"); printk 134 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: unable to get structural fsh\n"); printk 144 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: unable to get primary fsh\n"); printk 155 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: unable to get structural list inode\n"); printk 159 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: structural list inode is of wrong type (%x)\n", printk 166 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: unable to get inode list inode\n"); printk 170 fs/freevxfs/vxfs_fshead.c printk(KERN_ERR "vxfs: inode list inode is of wrong type (%x)\n", printk 53 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "\n\n"); printk 55 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "dumping vxfs inode %ld\n", ino); printk 57 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "dumping unknown vxfs inode\n"); printk 59 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "---------------------------\n"); printk 60 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "mode is %x\n", vip->vii_mode); printk 61 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "nlink:%u, uid:%u, gid:%u\n", printk 63 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "size:%Lx, blocks:%u\n", printk 65 fs/freevxfs/vxfs_inode.c printk(KERN_DEBUG "orgtype:%u\n", vip->vii_orgtype); printk 193 fs/freevxfs/vxfs_inode.c printk(KERN_WARNING "vxfs: unable to read block %ld\n", block); printk 233 fs/freevxfs/vxfs_inode.c printk(KERN_WARNING "vxfs: error on page 0x%p for inode %ld\n", printk 90 fs/freevxfs/vxfs_olt.c printk(KERN_NOTICE "vxfs: ivalid olt magic number\n"); printk 99 fs/freevxfs/vxfs_olt.c printk(KERN_NOTICE "vxfs: oltsize > 1 detected.\n"); printk 100 fs/freevxfs/vxfs_olt.c printk(KERN_NOTICE "vxfs: please notify hch@infradead.org\n"); printk 160 fs/freevxfs/vxfs_super.c printk(KERN_WARNING printk 171 fs/freevxfs/vxfs_super.c printk(KERN_NOTICE printk 220 fs/freevxfs/vxfs_super.c printk(KERN_WARNING "vxfs: unable to allocate incore superblock\n"); printk 226 fs/freevxfs/vxfs_super.c printk(KERN_WARNING "vxfs: unable to set blocksize\n"); printk 245 fs/freevxfs/vxfs_super.c printk(KERN_NOTICE "vxfs: can't find superblock.\n"); printk 252 fs/freevxfs/vxfs_super.c printk(KERN_NOTICE "vxfs: unsupported VxFS version (%d)\n", j); printk 257 fs/freevxfs/vxfs_super.c printk(KERN_DEBUG "vxfs: supported VxFS version (%d)\n", j); printk 258 fs/freevxfs/vxfs_super.c printk(KERN_DEBUG "vxfs: blocksize: %d\n", printk 269 fs/freevxfs/vxfs_super.c printk(KERN_WARNING "vxfs: unable to set final block size\n"); printk 274 fs/freevxfs/vxfs_super.c printk(KERN_WARNING "vxfs: unable to read olt\n"); printk 279 fs/freevxfs/vxfs_super.c printk(KERN_WARNING "vxfs: unable to read fshead\n"); printk 290 fs/freevxfs/vxfs_super.c printk(KERN_WARNING "vxfs: unable to get root dentry.\n"); printk 2206 fs/fs-writeback.c printk(KERN_DEBUG printk 432 fs/fs_context.c printk(KERN_WARNING "%s\n", q + 2); printk 435 fs/fs_context.c printk(KERN_ERR "%s\n", q + 2); printk 438 fs/fs_context.c printk(KERN_NOTICE "%s\n", q + 2); printk 311 fs/fscache/internal.h printk("*** fscache_raise_event(OBJ%d{%lx},%x)\n", printk 374 fs/fscache/internal.h printk(KERN_DEBUG "[%-6.6s] "FMT"\n", current->comm, ##__VA_ARGS__) printk 202 fs/hfs/bnode.c printk(KERN_DEBUG "hfs_btree_del_level\n"); printk 393 fs/hfs/brec.c printk(KERN_DEBUG "splitting index node...\n"); printk 303 fs/hfs/btree.c printk(KERN_DEBUG "create new bmap node...\n"); printk 46 fs/hfs/hfs_fs.h printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ printk 45 fs/hfsplus/hfsplus_fs.h printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ printk 44 fs/hpfs/hpfs_fn.h #define CHKCOND(x,y) if (!(x)) printk y printk 2040 fs/inode.c printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o) for" printk 114 fs/isofs/compress.c printk(KERN_DEBUG "zisofs: zisofs_inflateInit returned %d\n", printk 158 fs/isofs/compress.c printk(KERN_DEBUG printk 152 fs/isofs/dir.c printk(KERN_NOTICE "iso9660: Corrupted directory entry" printk 56 fs/isofs/export.c printk(KERN_ERR "isofs: isofs_export_get_parent(): " printk 66 fs/isofs/export.c printk(KERN_ERR "isofs: isofs_export_get_parent(): " printk 93 fs/isofs/export.c printk(KERN_ERR "isofs: Unable to find the \"..\" " printk 560 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: Session %d start %d type %d\n", printk 567 fs/isofs/inode.c printk(KERN_ERR "ISOFS: Invalid session number or type of track\n"); printk 571 fs/isofs/inode.c printk(KERN_ERR "ISOFS: Invalid session number\n"); printk 573 fs/isofs/inode.c printk(KERN_DEBUG "isofs.inode: CDROMMULTISESSION: rc=%d\n",i); printk 575 fs/isofs/inode.c printk(KERN_DEBUG "isofs.inode: XA disk: %s\n",ms_info.xa_flag?"yes":"no"); printk 576 fs/isofs/inode.c printk(KERN_DEBUG "isofs.inode: vol_desc_start = %d\n", ms_info.addr.lba); printk 656 fs/isofs/inode.c printk(KERN_WARNING printk 710 fs/isofs/inode.c printk(KERN_DEBUG "ISO 9660 Extensions: " printk 818 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: Max size:%ld Log zone size:%ld\n", printk 820 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: First datazone:%ld\n", sbi->s_firstdatazone); printk 822 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: Disc in High Sierra format.\n"); printk 925 fs/isofs/inode.c printk(KERN_NOTICE printk 945 fs/isofs/inode.c printk(KERN_DEBUG printk 965 fs/isofs/inode.c printk(KERN_WARNING printk 1001 fs/isofs/inode.c printk(KERN_WARNING "%s: get root inode failed\n", __func__); printk 1008 fs/isofs/inode.c printk(KERN_WARNING "%s: bread failed, dev=%s, iso_blknum=%d, block=%d\n", printk 1012 fs/isofs/inode.c printk(KERN_WARNING "ISOFS: Bad logical zone size %ld\n", printk 1016 fs/isofs/inode.c printk(KERN_WARNING "ISOFS: Logical zone size(%d) < hardware blocksize(%u)\n", printk 1021 fs/isofs/inode.c printk(KERN_WARNING "ISOFS: Unable to identify CD-ROM format.\n"); printk 1070 fs/isofs/inode.c printk(KERN_DEBUG "%s: block number too large\n", __func__); printk 1091 fs/isofs/inode.c printk(KERN_DEBUG "%s: block >= EOF (%lu, %llu)\n", printk 1117 fs/isofs/inode.c printk(KERN_DEBUG "%s: More than 100 file sections ?!?" printk 1119 fs/isofs/inode.c printk(KERN_DEBUG "%s: block=%lu firstext=%u sect_size=%u " printk 1154 fs/isofs/inode.c printk(KERN_DEBUG "%s: Kernel tries to allocate a block\n", __func__); printk 1297 fs/isofs/inode.c printk(KERN_INFO "ISOFS: unable to read i-node block %lu\n", block); printk 1302 fs/isofs/inode.c printk(KERN_INFO "%s: More than 100 file sections ?!?, aborting...\n" printk 1412 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: Interleaved files not (yet) supported.\n"); printk 1419 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: File unit size != 0 for ISO file (%ld).\n", printk 1427 fs/isofs/inode.c printk(KERN_DEBUG "ISOFS: Unusual flag settings for ISO file " printk 1499 fs/isofs/inode.c printk(KERN_WARNING "ISOFS: unable to read i-node block\n"); printk 102 fs/isofs/namei.c printk(KERN_NOTICE "iso9660: Corrupted directory entry" printk 97 fs/isofs/rock.c printk(KERN_NOTICE "rock: corrupted directory entry. " printk 127 fs/isofs/rock.c printk("Unable to read rock-ridge attributes\n"); printk 186 fs/isofs/rock.c printk(KERN_NOTICE "rock: directory entry would overflow " printk 188 fs/isofs/rock.c printk(KERN_NOTICE "rock: sig=0x%02x, size=%d, remaining=%d\n", printk 269 fs/isofs/rock.c printk("Unsupported NM flag settings (%d)\n", printk 377 fs/isofs/rock.c printk(KERN_DEBUG "ISO 9660 Extensions: "); printk 381 fs/isofs/rock.c printk(KERN_CONT "%c", rr->u.ER.data[p]); printk 383 fs/isofs/rock.c printk(KERN_CONT "\n"); printk 474 fs/isofs/rock.c printk("Symlink component flag " printk 505 fs/isofs/rock.c printk(KERN_WARNING "Attempt to read inode for " printk 510 fs/isofs/rock.c printk(KERN_ERR printk 518 fs/isofs/rock.c printk(KERN_ERR printk 552 fs/isofs/rock.c printk(KERN_WARNING "isofs: " printk 577 fs/isofs/rock.c printk(KERN_WARNING printk 638 fs/isofs/rock.c printk("Symlink component flag not implemented (%d)\n", printk 793 fs/isofs/rock.c printk("unable to read i-node block"); printk 796 fs/isofs/rock.c printk("symlink spans iso9660 blocks\n"); printk 160 fs/jbd2/checkpoint.c printk(KERN_ERR "%s: needed %d blocks and " printk 163 fs/jbd2/checkpoint.c printk(KERN_ERR "%s: no way to get more " printk 274 fs/jbd2/checkpoint.c printk(KERN_ERR printk 740 fs/jbd2/commit.c printk(KERN_WARNING printk 114 fs/jbd2/journal.c printk(KERN_DEBUG "%s: (%s, %u): %pV", file, func, line, &vaf); printk 697 fs/jbd2/journal.c printk(KERN_ERR printk 804 fs/jbd2/journal.c printk(KERN_ALERT "%s: journal block not found " printk 1292 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Journal too short (blocks %llu-%llu).\n", printk 1367 fs/jbd2/journal.c printk(KERN_ERR "JBD2: previous I/O error detected " printk 1385 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Error %d detected when updating " printk 1509 fs/jbd2/journal.c printk(KERN_ERR printk 1524 fs/jbd2/journal.c printk(KERN_WARNING "JBD2: no valid journal superblock found\n"); printk 1536 fs/jbd2/journal.c printk(KERN_WARNING "JBD2: unrecognised superblock format ID\n"); printk 1543 fs/jbd2/journal.c printk(KERN_WARNING "JBD2: journal file too short\n"); printk 1549 fs/jbd2/journal.c printk(KERN_WARNING printk 1558 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Can't enable checksumming v2 and v3 " printk 1566 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2/3 " printk 1572 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Unknown checksum type\n"); printk 1580 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n"); printk 1590 fs/jbd2/journal.c printk(KERN_ERR "JBD2: journal checksum error\n"); printk 1661 fs/jbd2/journal.c printk(KERN_WARNING printk 1680 fs/jbd2/journal.c printk(KERN_ERR "JBD2: journal transaction %u on %s " printk 1701 fs/jbd2/journal.c printk(KERN_WARNING "JBD2: recovery failed\n"); printk 1896 fs/jbd2/journal.c printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n"); printk 2058 fs/jbd2/journal.c printk(KERN_WARNING "JBD2: %s recovery information on journal\n", printk 2093 fs/jbd2/journal.c printk(KERN_ERR "Aborting journal on device %s.\n", printk 2321 fs/jbd2/journal.c printk(KERN_EMERG "JBD2: no memory for jbd2_slab cache\n"); printk 2381 fs/jbd2/journal.c printk(KERN_EMERG "JBD2: no memory for journal_head cache\n"); printk 2530 fs/jbd2/journal.c printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__); printk 2534 fs/jbd2/journal.c printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__); printk 2648 fs/jbd2/journal.c printk(KERN_EMERG "JBD2: failed to create handle cache\n"); printk 2719 fs/jbd2/journal.c printk(KERN_ERR "JBD2: leaked %d journal_heads!\n", n); printk 90 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: bad block at offset %u\n", printk 139 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: corrupted journal superblock\n"); printk 146 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: bad block at offset %u\n", printk 164 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: Failed to read block at offset %u\n", printk 320 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: error %d scanning journal\n", err); printk 366 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: IO error %d recovering block " printk 523 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: Invalid checksum " printk 573 fs/jbd2/recovery.c printk(KERN_ERR printk 601 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: Invalid " printk 615 fs/jbd2/recovery.c printk(KERN_ERR printk 795 fs/jbd2/recovery.c printk(KERN_ERR "JBD2: recovery pass %d ended at " printk 316 fs/jbd2/transaction.c printk(KERN_ERR "JBD2: %s wants too many credits " printk 816 fs/jbd2/transaction.c printk(KERN_WARNING printk 1449 fs/jbd2/transaction.c printk(KERN_ERR "JBD2: %s: " printk 1477 fs/jbd2/transaction.c printk(KERN_ERR "jbd2_journal_dirty_metadata: %s: " printk 329 fs/jffs2/compr.c printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); printk 353 fs/jffs2/compr.c printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); printk 407 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " Dump node_refs of the eraseblock %#08x\n", jeb->offset); printk 409 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " no nodes in the eraseblock %#08x\n", jeb->offset); printk 413 fs/jffs2/debug.c printk(JFFS2_DBG); printk 415 fs/jffs2/debug.c printk("%#08x", ref_offset(ref)); printk 417 fs/jffs2/debug.c printk("(%x)", ref->__totlen); printk 420 fs/jffs2/debug.c printk("->"); printk 425 fs/jffs2/debug.c printk("\n" JFFS2_DBG); printk 428 fs/jffs2/debug.c printk("\n"); printk 448 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " dump space accounting for the eraseblock at %#08x:\n", printk 451 fs/jffs2/debug.c printk(JFFS2_DBG "used_size: %#08x\n", jeb->used_size); printk 452 fs/jffs2/debug.c printk(JFFS2_DBG "dirty_size: %#08x\n", jeb->dirty_size); printk 453 fs/jffs2/debug.c printk(JFFS2_DBG "wasted_size: %#08x\n", jeb->wasted_size); printk 454 fs/jffs2/debug.c printk(JFFS2_DBG "unchecked_size: %#08x\n", jeb->unchecked_size); printk 455 fs/jffs2/debug.c printk(JFFS2_DBG "free_size: %#08x\n", jeb->free_size); printk 469 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " dump JFFS2 blocks lists:\n"); printk 471 fs/jffs2/debug.c printk(JFFS2_DBG "flash_size: %#08x\n", c->flash_size); printk 472 fs/jffs2/debug.c printk(JFFS2_DBG "used_size: %#08x\n", c->used_size); printk 473 fs/jffs2/debug.c printk(JFFS2_DBG "dirty_size: %#08x\n", c->dirty_size); printk 474 fs/jffs2/debug.c printk(JFFS2_DBG "wasted_size: %#08x\n", c->wasted_size); printk 475 fs/jffs2/debug.c printk(JFFS2_DBG "unchecked_size: %#08x\n", c->unchecked_size); printk 476 fs/jffs2/debug.c printk(JFFS2_DBG "free_size: %#08x\n", c->free_size); printk 477 fs/jffs2/debug.c printk(JFFS2_DBG "erasing_size: %#08x\n", c->erasing_size); printk 478 fs/jffs2/debug.c printk(JFFS2_DBG "bad_size: %#08x\n", c->bad_size); printk 479 fs/jffs2/debug.c printk(JFFS2_DBG "sector_size: %#08x\n", c->sector_size); printk 480 fs/jffs2/debug.c printk(JFFS2_DBG "jffs2_reserved_blocks size: %#08x\n", printk 484 fs/jffs2/debug.c printk(JFFS2_DBG "nextblock: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 489 fs/jffs2/debug.c printk(JFFS2_DBG "nextblock: NULL\n"); printk 492 fs/jffs2/debug.c printk(JFFS2_DBG "gcblock: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 496 fs/jffs2/debug.c printk(JFFS2_DBG "gcblock: NULL\n"); printk 499 fs/jffs2/debug.c printk(JFFS2_DBG "clean_list: empty\n"); printk 510 fs/jffs2/debug.c printk(JFFS2_DBG "clean_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 516 fs/jffs2/debug.c printk (JFFS2_DBG "Contains %d blocks with total wasted size %u, average wasted size: %u\n", printk 521 fs/jffs2/debug.c printk(JFFS2_DBG "very_dirty_list: empty\n"); printk 533 fs/jffs2/debug.c printk(JFFS2_DBG "very_dirty_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 539 fs/jffs2/debug.c printk (JFFS2_DBG "Contains %d blocks with total dirty size %u, average dirty size: %u\n", printk 544 fs/jffs2/debug.c printk(JFFS2_DBG "dirty_list: empty\n"); printk 556 fs/jffs2/debug.c printk(JFFS2_DBG "dirty_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 562 fs/jffs2/debug.c printk (JFFS2_DBG "contains %d blocks with total dirty size %u, average dirty size: %u\n", printk 567 fs/jffs2/debug.c printk(JFFS2_DBG "erasable_list: empty\n"); printk 575 fs/jffs2/debug.c printk(JFFS2_DBG "erasable_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 583 fs/jffs2/debug.c printk(JFFS2_DBG "erasing_list: empty\n"); printk 591 fs/jffs2/debug.c printk(JFFS2_DBG "erasing_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 598 fs/jffs2/debug.c printk(JFFS2_DBG "erase_checking_list: empty\n"); printk 606 fs/jffs2/debug.c printk(JFFS2_DBG "erase_checking_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 614 fs/jffs2/debug.c printk(JFFS2_DBG "erase_pending_list: empty\n"); printk 622 fs/jffs2/debug.c printk(JFFS2_DBG "erase_pending_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 630 fs/jffs2/debug.c printk(JFFS2_DBG "erasable_pending_wbuf_list: empty\n"); printk 638 fs/jffs2/debug.c printk(JFFS2_DBG "erasable_pending_wbuf_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 646 fs/jffs2/debug.c printk(JFFS2_DBG "free_list: empty\n"); printk 654 fs/jffs2/debug.c printk(JFFS2_DBG "free_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 662 fs/jffs2/debug.c printk(JFFS2_DBG "bad_list: empty\n"); printk 670 fs/jffs2/debug.c printk(JFFS2_DBG "bad_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 678 fs/jffs2/debug.c printk(JFFS2_DBG "bad_used_list: empty\n"); printk 686 fs/jffs2/debug.c printk(JFFS2_DBG "bad_used_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n", printk 709 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " dump fragtree of ino #%u\n", f->inocache->ino); printk 712 fs/jffs2/debug.c printk(JFFS2_DBG "frag %#04x-%#04x: %#08x(%d) on flash (*%p), left (%p), right (%p), parent (%p)\n", printk 717 fs/jffs2/debug.c printk(JFFS2_DBG "frag %#04x-%#04x: hole (*%p). left (%p), right (%p), parent (%p)\n", printk 727 fs/jffs2/debug.c printk(JFFS2_DBG "metadata at 0x%08x\n", ref_offset(f->metadata->raw)); printk 742 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " dump from offset %#08x to offset %#08x (%x bytes).\n", printk 748 fs/jffs2/debug.c printk(JFFS2_DBG "%#08x: ", offs); printk 751 fs/jffs2/debug.c printk(" "); printk 756 fs/jffs2/debug.c printk("\n"); printk 758 fs/jffs2/debug.c printk(JFFS2_DBG "%0#8x: ", offs); printk 761 fs/jffs2/debug.c printk("%02x ", buf[i]); printk 766 fs/jffs2/debug.c printk("\n"); printk 781 fs/jffs2/debug.c printk(JFFS2_DBG_MSG_PREFIX " dump node at offset %#08x.\n", ofs); printk 790 fs/jffs2/debug.c printk(JFFS2_DBG "magic:\t%#04x\n", je16_to_cpu(node.u.magic)); printk 791 fs/jffs2/debug.c printk(JFFS2_DBG "nodetype:\t%#04x\n", je16_to_cpu(node.u.nodetype)); printk 792 fs/jffs2/debug.c printk(JFFS2_DBG "totlen:\t%#08x\n", je32_to_cpu(node.u.totlen)); printk 793 fs/jffs2/debug.c printk(JFFS2_DBG "hdr_crc:\t%#08x\n", je32_to_cpu(node.u.hdr_crc)); printk 813 fs/jffs2/debug.c printk(JFFS2_DBG "the node is inode node\n"); printk 814 fs/jffs2/debug.c printk(JFFS2_DBG "ino:\t%#08x\n", je32_to_cpu(node.i.ino)); printk 815 fs/jffs2/debug.c printk(JFFS2_DBG "version:\t%#08x\n", je32_to_cpu(node.i.version)); printk 816 fs/jffs2/debug.c printk(JFFS2_DBG "mode:\t%#08x\n", node.i.mode.m); printk 817 fs/jffs2/debug.c printk(JFFS2_DBG "uid:\t%#04x\n", je16_to_cpu(node.i.uid)); printk 818 fs/jffs2/debug.c printk(JFFS2_DBG "gid:\t%#04x\n", je16_to_cpu(node.i.gid)); printk 819 fs/jffs2/debug.c printk(JFFS2_DBG "isize:\t%#08x\n", je32_to_cpu(node.i.isize)); printk 820 fs/jffs2/debug.c printk(JFFS2_DBG "atime:\t%#08x\n", je32_to_cpu(node.i.atime)); printk 821 fs/jffs2/debug.c printk(JFFS2_DBG "mtime:\t%#08x\n", je32_to_cpu(node.i.mtime)); printk 822 fs/jffs2/debug.c printk(JFFS2_DBG "ctime:\t%#08x\n", je32_to_cpu(node.i.ctime)); printk 823 fs/jffs2/debug.c printk(JFFS2_DBG "offset:\t%#08x\n", je32_to_cpu(node.i.offset)); printk 824 fs/jffs2/debug.c printk(JFFS2_DBG "csize:\t%#08x\n", je32_to_cpu(node.i.csize)); printk 825 fs/jffs2/debug.c printk(JFFS2_DBG "dsize:\t%#08x\n", je32_to_cpu(node.i.dsize)); printk 826 fs/jffs2/debug.c printk(JFFS2_DBG "compr:\t%#02x\n", node.i.compr); printk 827 fs/jffs2/debug.c printk(JFFS2_DBG "usercompr:\t%#02x\n", node.i.usercompr); printk 828 fs/jffs2/debug.c printk(JFFS2_DBG "flags:\t%#04x\n", je16_to_cpu(node.i.flags)); printk 829 fs/jffs2/debug.c printk(JFFS2_DBG "data_crc:\t%#08x\n", je32_to_cpu(node.i.data_crc)); printk 830 fs/jffs2/debug.c printk(JFFS2_DBG "node_crc:\t%#08x\n", je32_to_cpu(node.i.node_crc)); printk 841 fs/jffs2/debug.c printk(JFFS2_DBG "the node is dirent node\n"); printk 842 fs/jffs2/debug.c printk(JFFS2_DBG "pino:\t%#08x\n", je32_to_cpu(node.d.pino)); printk 843 fs/jffs2/debug.c printk(JFFS2_DBG "version:\t%#08x\n", je32_to_cpu(node.d.version)); printk 844 fs/jffs2/debug.c printk(JFFS2_DBG "ino:\t%#08x\n", je32_to_cpu(node.d.ino)); printk 845 fs/jffs2/debug.c printk(JFFS2_DBG "mctime:\t%#08x\n", je32_to_cpu(node.d.mctime)); printk 846 fs/jffs2/debug.c printk(JFFS2_DBG "nsize:\t%#02x\n", node.d.nsize); printk 847 fs/jffs2/debug.c printk(JFFS2_DBG "type:\t%#02x\n", node.d.type); printk 848 fs/jffs2/debug.c printk(JFFS2_DBG "node_crc:\t%#08x\n", je32_to_cpu(node.d.node_crc)); printk 849 fs/jffs2/debug.c printk(JFFS2_DBG "name_crc:\t%#08x\n", je32_to_cpu(node.d.name_crc)); printk 852 fs/jffs2/debug.c printk(JFFS2_DBG "name:\t\"%s\"\n", node.d.name); printk 862 fs/jffs2/debug.c printk(JFFS2_DBG "node type is unknown\n"); printk 91 fs/jffs2/debug.h printk(KERN_DEBUG "[JFFS2 DBG] (%d) %s: " fmt, \ printk 257 fs/jffs2/erase.c printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n"); printk 261 fs/jffs2/erase.c printk(KERN_DEBUG); printk 266 fs/jffs2/erase.c printk(KERN_DEBUG); printk 283 fs/jffs2/gc.c printk(KERN_DEBUG "Nextblock at %08x, used_size %08x, dirty_size %08x, wasted_size %08x, free_size %08x\n", c->nextblock->offset, c->nextblock->used_size, c->nextblock->dirty_size, c->nextblock->wasted_size, c->nextblock->free_size)); printk 134 fs/jfs/jfs_btree.h printk("btstack dump:\n"); printk 136 fs/jfs/jfs_btree.h printk(KERN_ERR "bn = %Lx, index = %d\n", printk 31 fs/jfs/jfs_debug.h printk(KERN_CRIT "BUG at %s:%d assert(%s)\n", \ printk 57 fs/jfs/jfs_debug.h printk(KERN_INFO fmt "\n", ## arg); \ printk 63 fs/jfs/jfs_debug.h printk(KERN_DEBUG fmt "\n", ## arg); \ printk 69 fs/jfs/jfs_debug.h printk(KERN_WARNING fmt "\n", ## arg); \ printk 75 fs/jfs/jfs_debug.h printk(KERN_ERR fmt "\n", ## arg); \ printk 333 fs/jfs/jfs_dmap.c printk(KERN_ERR "blkno = %Lx, nblocks = %Lx\n", printk 427 fs/jfs/jfs_dmap.c printk(KERN_ERR "blkno = %Lx, nblocks = %Lx\n", printk 1397 fs/jfs/jfs_dmap.c printk(KERN_ERR "blkno = %Lx, blocks = %Lx\n", printk 2925 fs/jfs/jfs_dtree.c printk(KERN_ERR "DT_GETPAGE failed!\n"); printk 24 fs/jfs/jfs_extent.c #define DPD(a) (printk("(a): %d\n",(a))) printk 25 fs/jfs/jfs_extent.c #define DPC(a) (printk("(a): %c\n",(a))) printk 29 fs/jfs/jfs_extent.c printk("(a): %x%08x ",(a)); \ printk 31 fs/jfs/jfs_extent.c printk("(a): %x ",(a) << 32); \ printk 36 fs/jfs/jfs_extent.c printk("(a): %x%08x\n",(a)); \ printk 38 fs/jfs/jfs_extent.c printk("(a): %x\n",(a) << 32); \ printk 41 fs/jfs/jfs_extent.c #define DPD1(a) (printk("(a): %d ",(a))) printk 42 fs/jfs/jfs_extent.c #define DPX(a) (printk("(a): %08x\n",(a))) printk 43 fs/jfs/jfs_extent.c #define DPX1(a) (printk("(a): %08x ",(a))) printk 44 fs/jfs/jfs_extent.c #define DPS(a) (printk("%s\n",(a))) printk 45 fs/jfs/jfs_extent.c #define DPE(a) (printk("\nENTERING: %s\n",(a))) printk 46 fs/jfs/jfs_extent.c #define DPE1(a) (printk("\nENTERING: %s",(a))) printk 47 fs/jfs/jfs_extent.c #define DPS1(a) (printk(" %s ",(a))) printk 1601 fs/jfs/jfs_logmgr.c printk(KERN_ERR "jfs_flush_journal: synclist not empty\n"); printk 271 fs/jfs/jfs_metapage.c printk(KERN_ERR "metapage_read_end_io: I/O error\n"); printk 328 fs/jfs/jfs_metapage.c printk(KERN_ERR "metapage_write_end_io: I/O error\n"); printk 409 fs/jfs/jfs_metapage.c printk(KERN_ERR "JFS: metapage_get_blocks failed\n"); printk 456 fs/jfs/jfs_metapage.c printk(KERN_ERR "JFS: bio_add_page failed unexpectedly\n"); printk 522 fs/jfs/jfs_metapage.c printk(KERN_ERR "JFS: bio_add_page failed unexpectedly\n"); printk 258 fs/jfs/jfs_txnmgr.c printk(KERN_INFO "JFS: nTxBlock = %d, nTxLock = %d\n", printk 819 fs/jfs/jfs_txnmgr.c printk(KERN_ERR "txLock: trying to lock locked page!"); printk 46 fs/jfs/jfs_unicode.c printk(KERN_ERR printk 49 fs/jfs/jfs_unicode.c printk(KERN_ERR printk 83 fs/jfs/resize.c printk(KERN_WARNING printk 92 fs/jfs/resize.c printk(KERN_WARNING "jfs_extendfs: invalid size\n"); printk 100 fs/jfs/resize.c printk(KERN_WARNING "jfs_extendfs: invalid size\n"); printk 110 fs/jfs/resize.c printk(KERN_WARNING "jfs_extendfs: read-only file system\n"); printk 308 fs/jfs/resize.c printk(KERN_ERR "jfs_extendfs: mapSize (0x%Lx) > t64 (0x%Lx)\n", printk 469 fs/jfs/resize.c printk(KERN_ERR "jfs_extendfs: diReadSpecial(bmap) failed\n"); printk 411 fs/jfs/super.c printk("jfs: Unrecognized mount option \"%s\" or missing value\n", printk 560 fs/jfs/xattr.c printk(KERN_ERR "ea_get: invalid extended attribute\n"); printk 767 fs/jfs/xattr.c printk(KERN_ERR printk 568 fs/libfs.c printk(KERN_WARNING "%s: %s passed in a files array" printk 222 fs/lockd/clntlock.c printk(KERN_ERR "lockd: unable to spawn reclaimer " printk 217 fs/lockd/clntproc.c printk("nlm_alloc_call: failed, waiting for memory\n"); printk 309 fs/lockd/clntproc.c printk(KERN_WARNING printk 579 fs/lockd/clntproc.c printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __func__); printk 638 fs/lockd/clntproc.c printk(KERN_WARNING "lockd: failed to reclaim lock for pid %d " printk 693 fs/lockd/clntproc.c printk("lockd: unexpected unlock status: %d\n", printk 738 fs/lockd/clntproc.c printk(KERN_WARNING "lockd: unexpected unlock status: %d\n", status); printk 810 fs/lockd/clntproc.c printk(KERN_NOTICE "lockd: weird return %d for CANCEL call\n", printk 846 fs/lockd/clntproc.c printk(KERN_NOTICE "lockd: unexpected status NLM_BLOCKED\n"); printk 861 fs/lockd/clntproc.c printk(KERN_NOTICE "lockd: unexpected server status %d\n", printk 487 fs/lockd/host.c printk("lockd: couldn't create RPC handle for %s\n", host->h_name); printk 597 fs/lockd/host.c printk(KERN_WARNING "lockd: couldn't shutdown host module!\n"); printk 203 fs/lockd/mon.c printk(KERN_NOTICE "lockd: cannot unmonitor %s\n", printk 324 fs/lockd/mon.c printk(KERN_WARNING "Invalid hostname \"%.*s\" " printk 248 fs/lockd/svc.c printk(KERN_WARNING printk 389 fs/lockd/svc.c printk(KERN_WARNING printk 403 fs/lockd/svc.c printk(KERN_WARNING printk 447 fs/lockd/svc.c printk(KERN_WARNING printk 456 fs/lockd/svc.c printk(KERN_WARNING "lockd_up: create service failed\n"); printk 519 fs/lockd/svc.c printk(KERN_ERR "lockd_down: no users! task=%p\n", printk 525 fs/lockd/svc.c printk(KERN_ERR "lockd_down: no lockd running.\n"); printk 463 fs/lockd/svc4proc.c printk(KERN_WARNING "lockd: rejected NSM callback from %s\n", printk 761 fs/lockd/svclock.c printk(KERN_WARNING "lockd: grant for unknown block\n"); printk 788 fs/lockd/svclock.c printk(KERN_WARNING "lockd: notification for unknown block!\n"); printk 851 fs/lockd/svclock.c printk(KERN_WARNING "lockd: unexpected error %d in %s!\n", printk 506 fs/lockd/svcproc.c printk(KERN_WARNING "lockd: rejected NSM callback from %s\n", printk 154 fs/lockd/svcsubs.c printk(KERN_WARNING "lockd: attempt to release unknown file!\n"); printk 192 fs/lockd/svcsubs.c printk("lockd: unlock failure in %s:%d\n", printk 388 fs/lockd/svcsubs.c printk(KERN_WARNING printk 1523 fs/locks.c printk(KERN_ERR "locks_delete_lock: fasync == %p\n", fl->fl_fasync); printk 51 fs/minix/bitmap.c printk("Trying to free block not in datazone\n"); printk 58 fs/minix/bitmap.c printk("minix_free_block: nonexistent bitmap buffer\n"); printk 64 fs/minix/bitmap.c printk("minix_free_block (%s:%lu): bit already cleared\n", printk 114 fs/minix/bitmap.c printk("Bad inode number on dev %s: %ld is out of range\n", printk 123 fs/minix/bitmap.c printk("Unable to read inode block\n"); printk 140 fs/minix/bitmap.c printk("Bad inode number on dev %s: %ld is out of range\n", printk 149 fs/minix/bitmap.c printk("Unable to read inode block\n"); printk 193 fs/minix/bitmap.c printk("minix_free_inode: inode 0 or nonexistent inode\n"); printk 199 fs/minix/bitmap.c printk("minix_free_inode: nonexistent imap in superblock\n"); printk 208 fs/minix/bitmap.c printk("minix_free_inode: bit %lu already cleared\n", bit); printk 244 fs/minix/bitmap.c printk("minix_new_inode: bit already set\n"); printk 144 fs/minix/inode.c printk("MINIX-fs warning: remounting unchecked fs, " printk 147 fs/minix/inode.c printk("MINIX-fs warning: remounting fs with errors, " printk 264 fs/minix/inode.c printk("MINIX-fs: file system does not have enough " printk 273 fs/minix/inode.c printk("MINIX-fs: file system does not have enough " printk 299 fs/minix/inode.c printk("MINIX-fs: mounting unchecked file system, " printk 302 fs/minix/inode.c printk("MINIX-fs: mounting file system with errors, " printk 309 fs/minix/inode.c printk("MINIX-fs: get root inode failed\n"); printk 313 fs/minix/inode.c printk("MINIX-fs: bad superblock or unable to read bitmaps\n"); printk 325 fs/minix/inode.c printk("MINIX-fs: can't allocate map\n"); printk 330 fs/minix/inode.c printk("MINIX-fs: bad superblock\n"); printk 335 fs/minix/inode.c printk("VFS: Can't find a Minix filesystem V1 | V2 | V3 " printk 342 fs/minix/inode.c printk("MINIX-fs: blocksize too small for device\n"); printk 346 fs/minix/inode.c printk("MINIX-fs: unable to read superblock\n"); printk 613 fs/minix/inode.c printk("IO error syncing minix inode [%s:%08lx]\n", printk 30 fs/minix/itree_v1.c printk("MINIX-fs: block_to_path: block %ld < 0 on dev %pg\n", printk 34 fs/minix/itree_v1.c printk("MINIX-fs: block_to_path: " printk 33 fs/minix/itree_v2.c printk("MINIX-fs: block_to_path: block %ld < 0 on dev %pg\n", printk 38 fs/minix/itree_v2.c printk("MINIX-fs: block_to_path: " printk 3770 fs/namespace.c printk(KERN_WARNING "%s: sysfs_init error: %d\n", printk 3774 fs/namespace.c printk(KERN_WARNING "%s: kobj create error\n", __func__); printk 578 fs/nfs/blocklayout/blocklayout.c printk(KERN_WARNING "NFS: %s: sector not aligned\n", __func__); printk 815 fs/nfs/blocklayout/blocklayout.c printk(KERN_ERR "%s: pNFS blksize %d not supported.\n", printk 248 fs/nfs/blocklayout/dev.c printk(KERN_WARNING "pNFS: failed to open device %d:%d (%ld)\n", printk 258 fs/nfs/blocklayout/dev.c printk(KERN_INFO "pNFS: using block device %s\n", printk 99 fs/nfs/blocklayout/rpc_pipefs.c printk(KERN_WARNING "%s failed to decode device: %d\n", printk 208 fs/nfs/callback.c printk(KERN_WARNING "NFS: bind callback service failed\n"); printk 221 fs/nfs/callback.c printk(KERN_ERR "NFS: callback service start failed\n"); printk 294 fs/nfs/callback.c printk(KERN_WARNING "nfs_callback_create_svc: no kthread, %d users??\n", printk 299 fs/nfs/callback.c printk(KERN_ERR "nfs_callback_create_svc: create service failed\n"); printk 651 fs/nfs/file.c printk(KERN_INFO "NFS: attempt to write to active swap file!\n"); printk 721 fs/nfs/filelayout/filelayout.c printk(KERN_ERR "NFS: Too big fh %d received %d\n", printk 1191 fs/nfs/filelayout/filelayout.c printk(KERN_INFO "%s: NFSv4 File Layout Driver Registering...\n", printk 1198 fs/nfs/filelayout/filelayout.c printk(KERN_INFO "%s: NFSv4 File Layout Driver Unregistering...\n", printk 95 fs/nfs/filelayout/filelayoutdev.c printk(KERN_WARNING "NFS: %s: stripe count %d greater than " printk 126 fs/nfs/filelayout/filelayoutdev.c printk(KERN_WARNING "NFS: %s: multipath count %d greater than " printk 134 fs/nfs/filelayout/filelayoutdev.c printk(KERN_WARNING "NFS: %s: stripe index %u >= num ds %u\n", printk 272 fs/nfs/filelayout/filelayoutdev.c printk(KERN_ERR "NFS: %s: No data server for offset index %d\n", printk 107 fs/nfs/flexfilelayout/flexfilelayout.c printk(KERN_ERR "NFS flexfiles: Too big fh received %d\n", printk 2520 fs/nfs/flexfilelayout/flexfilelayout.c printk(KERN_INFO "%s: NFSv4 Flexfile Layout Driver Registering...\n", printk 2527 fs/nfs/flexfilelayout/flexfilelayout.c printk(KERN_INFO "%s: NFSv4 Flexfile Layout Driver Unregistering...\n", printk 76 fs/nfs/fscache.c printk(KERN_WARNING "NFS: Unknown network family '%d'\n", printk 204 fs/nfs/fscache.c printk(KERN_WARNING "NFS:" printk 354 fs/nfs/inode.c printk(KERN_ERR "%s() %s %d " printk 1565 fs/nfs/inode.c printk(KERN_DEFAULT "%s at %p is empty\n", caption, fh); printk 1569 fs/nfs/inode.c printk(KERN_DEFAULT "%s at %p is %u bytes, crc: 0x%08x:\n", printk 1576 fs/nfs/inode.c printk(KERN_DEFAULT " %08x\n", printk 1580 fs/nfs/inode.c printk(KERN_DEFAULT " %08x %08x\n", printk 1584 fs/nfs/inode.c printk(KERN_DEFAULT " %08x %08x %08x\n", printk 1589 fs/nfs/inode.c printk(KERN_DEFAULT " %08x %08x %08x %08x\n", printk 1821 fs/nfs/inode.c printk(KERN_ERR "NFS: server %s error: fileid changed\n" printk 1836 fs/nfs/inode.c printk(KERN_DEBUG "NFS: %s: inode %lu mode changed, %07o to %07o\n", printk 31 fs/nfs/nfs4getroot.c printk(KERN_ERR "nfs4_get_rootfh:" printk 202 fs/nfs/nfs4idmap.c printk(KERN_NOTICE "NFS: Registering the %s key type\n", printk 555 fs/nfs/nfs4proc.c printk(KERN_WARNING "NFS: v4 server %s " printk 2188 fs/nfs/nfs4proc.c printk(KERN_ERR "NFS: %s: unhandled error " printk 1224 fs/nfs/nfs4state.c printk(KERN_ERR "%s: kthread_run: %ld\n", printk 1639 fs/nfs/nfs4state.c printk(KERN_ERR "NFS: %s: unhandled error %d\n", __func__, status); printk 4180 fs/nfs/nfs4xdr.c printk(KERN_WARNING "%s: label too long (%u)!\n", printk 4535 fs/nfs/nfs4xdr.c printk(KERN_INFO "%s: Warning: Multiple pNFS layout " printk 4744 fs/nfs/nfs4xdr.c printk(KERN_INFO "NFS: %s: Warning: Too many (%u) pNFS layout types\n", printk 5630 fs/nfs/nfs4xdr.c printk(KERN_WARNING "NFS: %s: Invalid rdma channel attrs " printk 278 fs/nfs/nfsroot.c printk(KERN_ERR "Root-NFS: could not allocate memory\n"); printk 281 fs/nfs/nfsroot.c printk(KERN_ERR "Root-NFS: mount options string too long\n"); printk 284 fs/nfs/nfsroot.c printk(KERN_ERR "Root-NFS: root device name too long.\n"); printk 300 fs/nfs/nfsroot.c printk(KERN_ERR "Root-NFS: no NFS server address\n"); printk 386 fs/nfs/pagelist.c printk(KERN_ERR "NFS: Invalid unlock attempted\n"); printk 160 fs/nfs/pnfs.c printk(KERN_ERR "NFS: %s: cl_exchange_flags 0x%x\n", printk 188 fs/nfs/pnfs.c printk(KERN_ERR "NFS: %s: Error initializing pNFS layout " printk 211 fs/nfs/pnfs.c printk(KERN_ERR "NFS: %s id 0 is reserved\n", __func__); printk 215 fs/nfs/pnfs.c printk(KERN_ERR "NFS: %s Layout driver must provide " printk 228 fs/nfs/pnfs.c printk(KERN_ERR "NFS: %s Module with id %d already loaded!\n", printk 331 fs/nfs/pnfs_nfs.c printk(KERN_WARNING "%s NULL device\n", __func__); printk 334 fs/nfs/pnfs_nfs.c printk(KERN_WARNING " ds %s\n" printk 1682 fs/nfs/super.c printk(KERN_INFO "NFS: mount server address does not match mountproto= " printk 1686 fs/nfs/super.c printk(KERN_INFO "NFS: server address does not match proto= option\n"); printk 1689 fs/nfs/super.c printk(KERN_INFO "NFS: bad IP address specified: %s\n", p); printk 1692 fs/nfs/super.c printk(KERN_INFO "NFS: bad mount option value specified: %s\n", p); printk 1695 fs/nfs/super.c printk(KERN_INFO "NFS: mount option vers=%u does not support " printk 1699 fs/nfs/super.c printk(KERN_INFO printk 1703 fs/nfs/super.c printk(KERN_INFO "NFS: not enough memory to parse option\n"); printk 1706 fs/nfs/super.c printk(KERN_INFO "NFS: security options invalid: %d\n", rc); printk 1632 fs/nfs/write.c printk(KERN_WARNING printk 905 fs/nfsd/export.c printk("nfsd: exp_rootfh path not found %s", name); printk 295 fs/nfsd/nfs3xdr.c printk("nfsd: inode locked twice during operation.\n"); printk 172 fs/nfsd/nfs4idmap.c printk("nfsd: nfsv4 idmapping failing: has idmapd %s?\n", printk 623 fs/nfsd/nfs4layouts.c printk(KERN_WARNING printk 635 fs/nfsd/nfs4layouts.c printk(KERN_ERR "nfsd: fence failed for client %s: %d!\n", printk 161 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: unable to generate recoverydir " printk 170 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: disabling legacy clientid tracking. " printk 255 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: failed to write recovery record" printk 428 fs/nfsd/nfs4recover.c printk("NFSD: Failed to remove expired client state directory" printk 439 fs/nfsd/nfs4recover.c printk("%s: illegal name %pd in recovery directory\n", printk 456 fs/nfsd/nfs4recover.c printk("failed to remove client recovery directory %pd\n", printk 483 fs/nfsd/nfs4recover.c printk("nfsd4: failed to purge old clients from recovery" printk 494 fs/nfsd/nfs4recover.c printk("%s: illegal name %pd in recovery directory\n", printk 522 fs/nfsd/nfs4recover.c printk("nfsd4: failed loading clients from recovery" printk 538 fs/nfsd/nfs4recover.c printk("NFSD: Using %s as the NFSv4 state recovery directory\n", printk 545 fs/nfsd/nfs4recover.c printk("NFSD: Unable to change credentials to find recovery" printk 553 fs/nfsd/nfs4recover.c printk("NFSD: unable to find recovery directory %s\n", printk 637 fs/nfsd/nfs4recover.c printk("NFSD: Using legacy client tracking operations.\n"); printk 1029 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: unable to create nfsdcld upcall pipe (%d)\n", printk 1041 fs/nfsd/nfs4recover.c printk("NFSD: Using old nfsdcld client tracking operations.\n"); printk 1135 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: Unable to create client " printk 1241 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: Unable to remove client " printk 1265 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: Unable to check client record on " printk 1456 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: Unable to end grace period: %d\n", ret); printk 1485 fs/nfsd/nfs4recover.c printk(KERN_ERR "NFSD: Unable to end grace period: %d\n", ret); printk 1624 fs/nfsd/nfs4recover.c printk("NFSD: Using nfsdcld client tracking operations.\n"); printk 1888 fs/nfsd/nfs4recover.c printk("NFSD: Using UMH upcall client tracking operations.\n"); printk 2079 fs/nfsd/nfs4recover.c printk(KERN_WARNING "NFSD: Unable to initialize client " printk 162 fs/nfsd/nfs4state.c printk("%s: client (clientid %08x/%08x) already expired\n", printk 2069 fs/nfsd/nfs4state.c printk(KERN_INFO "NFSD: all clients done reclaiming, ending NFSv4 grace period (net %x)\n", printk 5495 fs/nfsd/nfs4state.c printk("unknown stateid type %x\n", s->sc_type); printk 7113 fs/nfsd/nfs4state.c printk(KERN_INFO "NFS Client: %s has %u %s\n", buf, count, type); printk 7715 fs/nfsd/nfs4state.c printk(KERN_INFO "NFSD: starting %ld-second grace period (net %x)\n", printk 7721 fs/nfsd/nfs4state.c printk(KERN_INFO "NFSD: no clients to reclaim, skipping NFSv4 grace period (net %x)\n", printk 188 fs/nfsd/nfscache.c printk(KERN_ERR "nfsd: failed to allocate reply cache\n"); printk 467 fs/nfsd/nfscache.c printk(KERN_WARNING "nfsd: bad repcache type %d\n", rp->c_type); printk 519 fs/nfsd/nfscache.c printk("nfsd: RC_REPLSTAT/reply len %d!\n",len); printk 558 fs/nfsd/nfscache.c printk(KERN_WARNING "nfsd: cached reply too large (%zd).\n", printk 735 fs/nfsd/nfsctl.c printk(KERN_ERR "%s: socket net is different to NFSd's one\n", __func__); printk 1521 fs/nfsd/nfsctl.c printk(KERN_INFO "Installing knfsd (copyright (C) 1996 okir@monad.swb.de).\n"); printk 281 fs/nfsd/nfsfh.c printk("nfsd: find_fh_dentry returned a DISCONNECTED directory: %pd2\n", printk 559 fs/nfsd/nfsfh.c printk(KERN_ERR "fh_compose: fh %pd2 not initialized!\n", printk 563 fs/nfsd/nfsfh.c printk(KERN_ERR "fh_compose: called with maxsize %d! %pd2\n", printk 631 fs/nfsd/nfsfh.c printk(KERN_ERR "fh_update: fh not verified!\n"); printk 634 fs/nfsd/nfsfh.c printk(KERN_ERR "fh_update: %pd2 still negative!\n", printk 293 fs/nfsd/nfsfh.h printk(KERN_WARNING "fh_lock: %pd2 already locked!\n", printk 187 fs/nfsd/nfsproc.c printk(KERN_NOTICE printk 293 fs/nfsd/nfsproc.c printk(KERN_WARNING printk 492 fs/nfsd/nfsproc.c printk(KERN_WARNING printk 519 fs/nfsd/nfssvc.c printk(KERN_WARNING "nfsd: last server has exited, flushing export " printk 884 fs/nfsd/nfssvc.c printk("Unable to start nfsd thread: out of memory\n"); printk 1227 fs/nfsd/vfs.c printk(KERN_WARNING "nfsd: bad file type %o in nfsd_create\n", printk 160 fs/nilfs2/page.c printk(KERN_CRIT "NILFS_PAGE_BUG(NULL)\n"); printk 167 fs/nilfs2/page.c printk(KERN_CRIT "NILFS_PAGE_BUG(%p): cnt=%d index#=%llu flags=0x%lx " printk 178 fs/nilfs2/page.c printk(KERN_CRIT printk 75 fs/nilfs2/super.c printk("%sNILFS (%s): %pV\n", level, sb->s_id, &vaf); printk 77 fs/nilfs2/super.c printk("%sNILFS: %pV\n", level, &vaf); printk 125 fs/nilfs2/super.c printk(KERN_CRIT "NILFS error (device %s): %s: %pV\n", printk 134 fs/nilfs2/super.c printk(KERN_CRIT "Remounting filesystem read-only\n"); printk 1452 fs/nilfs2/super.c printk(KERN_INFO "NILFS version 2 loaded\n"); printk 176 fs/notify/inotify/inotify_fsnotify.c printk(KERN_WARNING "fsn_mark->group=%p wd=%d\n", printk 463 fs/notify/inotify/inotify_user.c printk(KERN_ERR "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p\n", printk 49 fs/ocfs2/buffer_head_io.h printk("ocfs2: bh == NULL\n"); printk 390 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: node %d hb write hung for %ds on region %s (%s).\n", printk 406 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: all nodes hb write hung, maybe region %s (%s) is down.\n", printk 426 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: node %d hb write hung for %ds on region %s (%s), negotiate timeout with node %d.\n", printk 444 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: receive negotiate timeout message from node %d on region %s (%s).\n", printk 459 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: negotiate timeout approved by master node on region %s (%s).\n", printk 872 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: Region %s (%s) is now a quorum device\n", printk 1178 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: Unable to stabilize " printk 1910 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: Heartbeat started on region %s (%s)\n", printk 2100 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: Heartbeat %s on region %s (%s)\n", printk 2184 fs/ocfs2/cluster/heartbeat.c printk(KERN_NOTICE "o2hb: Heartbeat mode set to %s\n", printk 79 fs/ocfs2/cluster/masklog.c printk("%s(%s,%u,%u):%s:%d %s%pV", printk 559 fs/ocfs2/cluster/nodemanager.c printk(KERN_INFO "ocfs2: Changing fence method to %s\n", printk 845 fs/ocfs2/cluster/nodemanager.c printk(KERN_ERR "nodemanager: Registration returned %d\n", ret); printk 72 fs/ocfs2/cluster/quorum.c printk(KERN_ERR "*** ocfs2 is very sorry to be fencing this " printk 532 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: No longer connected to " printk 540 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n", printk 631 fs/ocfs2/cluster/tcp.c printk(KERN_INFO "o2net: Connection to " SC_NODEF_FMT printk 1262 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " Advertised net " printk 1280 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a network " printk 1291 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a keepalive " printk 1302 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a heartbeat " printk 1515 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been " printk 1673 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: Connect attempt to " SC_NODEF_FMT printk 1697 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: No connection established with " printk 1857 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: Attempt to connect from unknown " printk 1867 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: Unexpected connect attempt " printk 1900 fs/ocfs2/cluster/tcp.c printk(KERN_NOTICE "o2net: Attempt to connect from node '%s' " printk 2021 fs/ocfs2/cluster/tcp.c printk(KERN_ERR "o2net: Error %d while creating socket\n", ret); printk 2038 fs/ocfs2/cluster/tcp.c printk(KERN_ERR "o2net: Error %d while binding socket at " printk 2045 fs/ocfs2/cluster/tcp.c printk(KERN_ERR "o2net: Error %d while listening on %pI4:%u\n", printk 47 fs/ocfs2/dlm/dlmdebug.c printk(" refmap nodes: [ "); printk 53 fs/ocfs2/dlm/dlmdebug.c printk("%u ", bit); printk 56 fs/ocfs2/dlm/dlmdebug.c printk("], inflight=%u\n", res->inflight_locks); printk 63 fs/ocfs2/dlm/dlmdebug.c printk(" type=%d, conv=%d, node=%u, cookie=%u:%llu, " printk 91 fs/ocfs2/dlm/dlmdebug.c printk("lockres: %s, owner=%u, state=%u\n", printk 93 fs/ocfs2/dlm/dlmdebug.c printk(" last used: %lu, refcnt: %u, on purge list: %s\n", printk 96 fs/ocfs2/dlm/dlmdebug.c printk(" on dirty list: %s, on reco list: %s, " printk 101 fs/ocfs2/dlm/dlmdebug.c printk(" inflight locks: %d, asts reserved: %d\n", printk 104 fs/ocfs2/dlm/dlmdebug.c printk(" granted queue:\n"); printk 108 fs/ocfs2/dlm/dlmdebug.c printk(" converting queue:\n"); printk 112 fs/ocfs2/dlm/dlmdebug.c printk(" blocked queue:\n"); printk 537 fs/ocfs2/dlm/dlmdomain.c printk("( "); printk 540 fs/ocfs2/dlm/dlmdomain.c printk("%d ", node); printk 543 fs/ocfs2/dlm/dlmdomain.c printk(") %u nodes\n", num); printk 563 fs/ocfs2/dlm/dlmdomain.c printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s ", node, dlm->name); printk 720 fs/ocfs2/dlm/dlmdomain.c printk(KERN_NOTICE "o2dlm: Leaving domain %s\n", dlm->name); printk 944 fs/ocfs2/dlm/dlmdomain.c printk(KERN_NOTICE "o2dlm: Node %u joins domain %s ", printk 1683 fs/ocfs2/dlm/dlmdomain.c printk(KERN_NOTICE "o2dlm: Joining domain %s ", dlm->name); printk 352 fs/ocfs2/dlm/dlmrecovery.c printk(KERN_NOTICE "o2dlm: Waiting on the death of node %u in " printk 369 fs/ocfs2/dlm/dlmrecovery.c printk(KERN_NOTICE "o2dlm: Waiting on the recovery of node %u in " printk 413 fs/ocfs2/dlm/dlmrecovery.c printk(KERN_NOTICE "o2dlm: Begin recovery on domain %s for node %u\n", printk 424 fs/ocfs2/dlm/dlmrecovery.c printk(KERN_NOTICE "o2dlm: End recovery on domain %s\n", dlm->name); printk 430 fs/ocfs2/dlm/dlmrecovery.c printk(KERN_NOTICE "o2dlm: Node %u (%s) is the Recovery Master for the " printk 1967 fs/ocfs2/dlm/dlmrecovery.c printk("lockres lvb=["); printk 1969 fs/ocfs2/dlm/dlmrecovery.c printk("%02x", res->lvb[i]); printk 1970 fs/ocfs2/dlm/dlmrecovery.c printk("]\nmigrated lvb=["); printk 1972 fs/ocfs2/dlm/dlmrecovery.c printk("%02x", mres->lvb[i]); printk 1973 fs/ocfs2/dlm/dlmrecovery.c printk("]\n"); printk 79 fs/ocfs2/dlmfs/dlmfs.c printk(KERN_ERR "%s: readonly parameter\n", kp->name); printk 641 fs/ocfs2/dlmfs/dlmfs.c printk("OCFS2 User DLM kernel interface loaded\n"); printk 70 fs/ocfs2/extent_map.h printk("ocfs2: bh == NULL\n"); printk 1635 fs/ocfs2/journal.c printk(KERN_NOTICE "ocfs2: Begin replay journal (node %d, slot %d) on "\ printk 1692 fs/ocfs2/journal.c printk(KERN_NOTICE "ocfs2: End replay journal (node %d, slot %d) on "\ printk 933 fs/ocfs2/localalloc.c printk("ocfs2_verify_zero_bits: start = %u, count = " printk 935 fs/ocfs2/localalloc.c printk("ocfs2_verify_zero_bits: bit %u is set!", printk 401 fs/ocfs2/quota_local.c printk(KERN_NOTICE "ocfs2: Beginning quota recovery on device (%s) for " printk 597 fs/ocfs2/quota_local.c printk(KERN_NOTICE "ocfs2: Finishing quota recovery on device (%s) for " printk 615 fs/ocfs2/quota_local.c printk(KERN_NOTICE "ocfs2: Skipping quota recovery on " printk 247 fs/ocfs2/resize.c printk(KERN_WARNING "ocfs2: Failed to update super blocks on %s" printk 475 fs/ocfs2/slot_map.c printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already " printk 264 fs/ocfs2/stack_o2cb.c printk(KERN_ERR "o2cb: This node has not been configured.\n"); printk 280 fs/ocfs2/stack_o2cb.c printk(KERN_ERR "o2cb: %s heartbeat has not been " printk 294 fs/ocfs2/stack_o2cb.c printk(KERN_ERR "o2cb: This node could not connect to nodes:"); printk 299 fs/ocfs2/stack_o2cb.c printk(" %u", i); printk 301 fs/ocfs2/stack_o2cb.c printk(".\n"); printk 314 fs/ocfs2/stack_o2cb.c printk(KERN_NOTICE "o2cb: o2dlm has evicted node %d from domain %.*s\n", printk 334 fs/ocfs2/stack_o2cb.c printk(KERN_ERR "o2cb: Cluster check failed. Fix errors " printk 218 fs/ocfs2/stack_user.c printk(KERN_ERR printk 574 fs/ocfs2/stack_user.c printk(KERN_ERR printk 640 fs/ocfs2/stack_user.c printk(KERN_ERR printk 829 fs/ocfs2/stack_user.c printk(KERN_ERR "%s lkid %x error %d\n", printk 837 fs/ocfs2/stack_user.c printk(KERN_ERR "%s lkid %x status %d\n", printk 855 fs/ocfs2/stack_user.c printk(KERN_ERR "%s lkid %x flags %x mode %d error %d\n", printk 865 fs/ocfs2/stack_user.c printk(KERN_ERR "%s lkid %x flags %x mode %d status %d\n", printk 943 fs/ocfs2/stack_user.c printk(KERN_INFO "ocfs2: Node %d/%d down. Initiating recovery.\n", printk 1006 fs/ocfs2/stack_user.c printk(KERN_ERR "ocfs2: Unable to create the " printk 1016 fs/ocfs2/stack_user.c printk(KERN_NOTICE "ocfs2: You seem to be using an older " printk 1032 fs/ocfs2/stack_user.c printk(KERN_ERR "ocfs2: Could not determine" printk 1045 fs/ocfs2/stack_user.c printk(KERN_ERR printk 122 fs/ocfs2/stackglue.c printk(KERN_ERR printk 139 fs/ocfs2/stackglue.c printk(KERN_ERR printk 143 fs/ocfs2/stackglue.c printk(KERN_ERR printk 173 fs/ocfs2/stackglue.c printk(KERN_INFO "ocfs2: Registered cluster interface %s\n", printk 177 fs/ocfs2/stackglue.c printk(KERN_ERR "ocfs2: Stack \"%s\" already registered\n", printk 198 fs/ocfs2/stackglue.c printk(KERN_INFO "ocfs2: Unregistered cluster interface %s\n", printk 201 fs/ocfs2/stackglue.c printk(KERN_ERR "Stack \"%s\" is not registered\n", printk 436 fs/ocfs2/stackglue.c printk(KERN_ERR printk 718 fs/ocfs2/stackglue.c printk(KERN_ERR printk 1064 fs/ocfs2/super.c printk(KERN_NOTICE "ocfs2: Readonly device (%s) detected. " printk 1136 fs/ocfs2/super.c printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %s, slot %d) " printk 1929 fs/ocfs2/super.c printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %s)\n", printk 2405 fs/ocfs2/super.c printk(KERN_NOTICE "ocfs2: File system on device (%s) was not " printk 2551 fs/ocfs2/super.c printk(KERN_CRIT "OCFS2: ERROR (device %s): %s: %pV", printk 2573 fs/ocfs2/super.c printk(KERN_CRIT "OCFS2: abort (device %s): %s: %pV", printk 324 fs/omfs/dir.c printk(KERN_WARNING "omfs: bad hash chain detected\n"); printk 125 fs/omfs/inode.c printk(KERN_WARNING "omfs: unknown file type: %d\n", printk 495 fs/omfs/inode.c printk(KERN_ERR "omfs: Invalid superblock (%x)\n", printk 509 fs/omfs/inode.c printk(KERN_ERR "omfs: sysblock number (%llx) is out of range\n", printk 515 fs/omfs/inode.c printk(KERN_ERR "omfs: sysblock size (%d) is out of range\n", printk 522 fs/omfs/inode.c printk(KERN_ERR "omfs: block size (%d) is out of range\n", printk 550 fs/omfs/inode.c printk(KERN_ERR "omfs: block count discrepancy between " printk 559 fs/omfs/inode.c printk(KERN_ERR "omfs: free space bitmap location is corrupt " printk 567 fs/omfs/inode.c printk(KERN_ERR "omfs: cluster size out of range (%d)", printk 589 fs/omfs/inode.c printk(KERN_DEBUG "omfs: Mounted volume %s\n", omfs_rb->r_name); printk 1166 fs/open.c printk(KERN_ERR "VFS: Close: file count is 0\n"); printk 409 fs/openpromfs/inode.c printk("openprom_fill_super: get root inode failed\n"); printk 171 fs/orangefs/inode.c printk("writepages_callback not private!\n"); printk 367 fs/orangefs/inode.c printk("%s: can't create next page, quitting\n", printk 542 fs/orangefs/inode.c printk("invalidate range offset %llu length %u\n", printk 544 fs/orangefs/inode.c printk("write range offset %llu length %zu\n", printk 359 fs/orangefs/protocol.h printk(KERN_DEBUG fmt, ##__VA_ARGS__); \ printk 34 fs/qnx4/bitmap.c printk(KERN_ERR "qnx4: I/O error in counting free blocks\n"); printk 36 fs/qnx4/dir.c printk(KERN_ERR "qnx4_readdir: bread failed (%ld)\n", blknum); printk 212 fs/qnx4/inode.c printk(KERN_ERR "qnx4: unable to read the superblock\n"); printk 221 fs/qnx4/inode.c printk(KERN_ERR "qnx4: %s\n", errmsg); printk 228 fs/qnx4/inode.c printk(KERN_ERR "qnx4: get inode failed\n"); printk 282 fs/qnx4/inode.c printk(KERN_ERR "qnx4: bad inode number on dev %s: %lu is " printk 291 fs/qnx4/inode.c printk(KERN_ERR "qnx4: major problem: unable to read inode from dev " printk 326 fs/qnx4/inode.c printk(KERN_ERR "qnx4: bad inode %lu on dev %s\n", printk 411 fs/qnx4/inode.c printk(KERN_INFO "QNX4 filesystem 0.2.3 registered.\n"); printk 33 fs/qnx4/namei.c printk(KERN_WARNING "qnx4: matching unassigned buffer !\n"); printk 8 fs/qnx4/qnx4.h #define QNX4DEBUG(X) printk X printk 147 fs/quota/dquot.c printk(KERN_ERR "Quota error (device %s): %s: %pV\n", printk 1085 fs/quota/dquot.c printk(KERN_WARNING "VFS (%s): Writes happened after quota" printk 2970 fs/quota/dquot.c printk(KERN_NOTICE "VFS: Disk quotas %s\n", __DQUOT_VERSION__); printk 52 fs/quota/netlink.c printk(KERN_ERR printk 59 fs/quota/netlink.c printk(KERN_ERR printk 90 fs/quota/netlink.c printk(KERN_ERR "VFS: Not enough space to compose quota message!\n"); printk 99 fs/quota/netlink.c printk(KERN_ERR printk 54 fs/quota/quota_tree.c printk(KERN_WARNING printk 153 fs/quota/quota_v1.c printk(KERN_INFO printk 38 fs/reiserfs/item_ops.c printk("\tmode | size | nlinks | first direct | mtime\n"); printk 42 fs/reiserfs/item_ops.c printk("\t0%-6o | %6u | %2u | %d | %u\n", sd_v1_mode(sd), printk 49 fs/reiserfs/item_ops.c printk("\t0%-6o | %6llu | %2u | %d | %u\n", sd_v2_mode(sd), printk 139 fs/reiserfs/item_ops.c printk("\""); printk 141 fs/reiserfs/item_ops.c printk("%c", item[j++]); printk 142 fs/reiserfs/item_ops.c printk("\"\n"); printk 255 fs/reiserfs/item_ops.c printk(" %d", start); printk 257 fs/reiserfs/item_ops.c printk(" %d(%d)", start, len); printk 272 fs/reiserfs/item_ops.c printk("%d pointers\n[ ", (int)I_UNFM_NUM(ih)); printk 280 fs/reiserfs/item_ops.c printk("]\n"); printk 380 fs/reiserfs/item_ops.c printk("\n # %-15s%-30s%-15s%-15s%-15s\n", "Name", printk 403 fs/reiserfs/item_ops.c printk("%d: %-15s%-15d%-15d%-15lld%-15lld(%s)\n", printk 614 fs/reiserfs/item_ops.c printk("%d entries: ", dir_u->entry_count); printk 616 fs/reiserfs/item_ops.c printk("%d ", dir_u->entry_sizes[i]); printk 617 fs/reiserfs/item_ops.c printk("\n"); printk 290 fs/reiserfs/prints.c printk(KERN_WARNING "REISERFS warning (device %s): %s%s%s: " printk 294 fs/reiserfs/prints.c printk(KERN_WARNING "REISERFS warning: %s%s%s: %s\n", printk 303 fs/reiserfs/prints.c printk(KERN_NOTICE "REISERFS (device %s): %s", printk 306 fs/reiserfs/prints.c printk(KERN_NOTICE "REISERFS %s:", error_buf); printk 313 fs/reiserfs/prints.c printk(error_buf); printk 321 fs/reiserfs/prints.c printk(KERN_DEBUG "REISERFS debug (device %s): %s\n", printk 324 fs/reiserfs/prints.c printk(KERN_DEBUG "REISERFS debug: %s\n", error_buf); printk 384 fs/reiserfs/prints.c printk(KERN_WARNING "REISERFS panic (device %s): %s%s%s: %s\n", printk 388 fs/reiserfs/prints.c printk(KERN_WARNING "REISERFS panic: %s%s%s: %s\n", printk 404 fs/reiserfs/prints.c printk(KERN_CRIT "REISERFS error (device %s): %s %s: %s\n", printk 407 fs/reiserfs/prints.c printk(KERN_CRIT "REISERFS error (device %s): %s: %s\n", printk 430 fs/reiserfs/prints.c printk(KERN_CRIT "REISERFS abort (device %s): %s\n", sb->s_id, printk 471 fs/reiserfs/prints.c printk("\n"); printk 473 fs/reiserfs/prints.c printk("\n"); printk 494 fs/reiserfs/prints.c printk printk 515 fs/reiserfs/prints.c printk printk 517 fs/reiserfs/prints.c printk printk 520 fs/reiserfs/prints.c printk printk 527 fs/reiserfs/prints.c printk printk 564 fs/reiserfs/prints.c printk("%pg\'s super block is in block %llu\n", bh->b_bdev, printk 566 fs/reiserfs/prints.c printk("Reiserfs version %s\n", version); printk 567 fs/reiserfs/prints.c printk("Block count %u\n", sb_block_count(rs)); printk 568 fs/reiserfs/prints.c printk("Blocksize %d\n", sb_blocksize(rs)); printk 569 fs/reiserfs/prints.c printk("Free blocks %u\n", sb_free_blocks(rs)); printk 579 fs/reiserfs/prints.c printk printk 584 fs/reiserfs/prints.c printk("Root block %u\n", sb_root_block(rs)); printk 585 fs/reiserfs/prints.c printk("Journal block (first) %d\n", sb_jp_journal_1st_block(rs)); printk 586 fs/reiserfs/prints.c printk("Journal dev %d\n", sb_jp_journal_dev(rs)); printk 587 fs/reiserfs/prints.c printk("Journal orig size %d\n", sb_jp_journal_size(rs)); printk 588 fs/reiserfs/prints.c printk("FS state %d\n", sb_fs_state(rs)); printk 589 fs/reiserfs/prints.c printk("Hash function \"%s\"\n", printk 592 fs/reiserfs/prints.c printk("Tree height %d\n", sb_tree_height(rs)); printk 604 fs/reiserfs/prints.c printk("Desc block %llu (j_trans_id %d, j_mount_id %d, j_len %d)", printk 617 fs/reiserfs/prints.c printk("print_block: buffer is NULL\n"); printk 630 fs/reiserfs/prints.c printk printk 728 fs/reiserfs/prints.c printk("%s\n%s", mes, print_tb_buf); printk 42 fs/reiserfs/resize.c printk("can\'t shrink filesystem on-line\n"); printk 51 fs/reiserfs/resize.c printk("reiserfs_resize: can\'t read last block\n"); printk 62 fs/reiserfs/resize.c printk printk 87 fs/reiserfs/resize.c printk printk 130 fs/reiserfs/resize.c printk("reiserfs_resize: unable to allocate memory.\n"); printk 399 fs/reiserfs/super.c printk("done\n"); printk 1387 fs/reiserfs/super.c printk("reiserfs: enabling write barrier flush mode\n"); printk 1390 fs/reiserfs/super.c printk("reiserfs: write barriers turned off\n"); printk 2029 fs/reiserfs/super.c printk("reiserfs: using flush barriers\n"); printk 2552 fs/reiserfs/super.c printk(KERN_WARNING "reiserfs: Quota write (off=%llu, len=%llu) cancelled because transaction is not started.\n", printk 216 fs/stat.c printk(KERN_WARNING "VFS: Warning: %s using old stat() call. Recompile your binary.\n", printk 467 fs/super.c printk("VFS: Busy inodes after unmount of %s. " printk 1012 fs/super.c printk("Emergency Remount complete\n"); printk 1041 fs/super.c printk(KERN_WARNING "Emergency Thaw complete\n"); printk 1803 fs/super.c printk(KERN_ERR printk 1848 fs/super.c printk(KERN_ERR printk 142 fs/sync.c printk("Emergency Sync complete\n"); printk 70 fs/sysfs/file.c printk("fill_read_buffer: %pS returned bad count\n", printk 60 fs/sysv/balloc.c printk("sysv_free_block: trying to free block not in datazone\n"); printk 68 fs/sysv/balloc.c printk("sysv_free_block: flc_count > flc_size\n"); printk 80 fs/sysv/balloc.c printk("sysv_free_block: getblk() failed\n"); printk 122 fs/sysv/balloc.c printk("sysv_new_block: new block %d is not in data zone\n", printk 132 fs/sysv/balloc.c printk("sysv_new_block: cannot read free-list block\n"); printk 139 fs/sysv/balloc.c printk("sysv_new_block: free-list block with >flc_size entries\n"); printk 219 fs/sysv/balloc.c printk("sysv_count_free_blocks: new block %d is not in data zone\n", printk 223 fs/sysv/balloc.c printk("sysv_count_free_blocks: cannot read free-list block\n"); printk 226 fs/sysv/balloc.c printk("sysv_count_free_blocks: >flc_size entries in free-list block\n"); printk 233 fs/sysv/balloc.c printk("sysv_count_free_blocks: free block count was %d, " printk 113 fs/sysv/ialloc.c printk("sysv_free_inode: inode 0,1,2 or nonexistent inode\n"); printk 118 fs/sysv/ialloc.c printk("sysv_free_inode: unable to read inode block on device " printk 221 fs/sysv/ialloc.c printk("sysv_count_free_inodes: " printk 231 fs/sysv/ialloc.c printk("sysv_count_free_inodes: unable to read inode table\n"); printk 181 fs/sysv/inode.c printk("Bad inode number on dev %s: %d is out of range\n", printk 194 fs/sysv/inode.c printk("Major problem: unable to read inode from dev %s\n", printk 243 fs/sysv/inode.c printk("Bad inode number on dev %s: %d is out of range\n", printk 249 fs/sysv/inode.c printk("unable to read i-node block\n"); printk 272 fs/sysv/inode.c printk ("IO error syncing sysv inode [%s:%08x]\n", printk 33 fs/sysv/itree.c printk("sysv_block_map: block < 0\n"); printk 221 fs/sysv/super.c printk("SysV FS: SCO EAFS on %s detected, " printk 244 fs/sysv/super.c printk("SysV FS: can't handle long file names on %s, " printk 329 fs/sysv/super.c printk("VFS: Found a %s FS (block size = %ld) on device %s\n", printk 339 fs/sysv/super.c printk("SysV FS: get root inode failed\n"); printk 344 fs/sysv/super.c printk("SysV FS: get root dentry failed\n"); printk 417 fs/sysv/super.c printk("oldfs: cannot read superblock\n"); printk 425 fs/sysv/super.c printk("VFS: unable to find oldfs superblock on device %s\n", printk 431 fs/sysv/super.c printk("VFS: oldfs: unsupported block size (%dKb)\n", printk 498 fs/sysv/super.c printk("VFS: unable to read V7 FS superblock on " printk 522 fs/sysv/super.c printk(KERN_ERR "VFS: could not find a valid V7 on %s.\n", printk 253 fs/ufs/util.c printk(KERN_ERR "ufs_change_blocknr: " printk 272 fs/ufs/util.c printk(KERN_ERR "ufs_change_blocknr: " printk 191 fs/unicode/utf8-core.c printk(KERN_WARNING"UTF-8 version not specified. " printk 438 fs/userfaultfd.c printk(KERN_WARNING printk 27 fs/verity/init.c printk("%sfs-verity (%s, inode %lu): %pV\n", printk 30 fs/verity/init.c printk("%sfs-verity: %pV\n", level, &vaf); printk 24 fs/xfs/xfs_message.c printk("%sXFS (%s): %pV\n", level, mp->m_fsname, vaf); printk 27 fs/xfs/xfs_message.c printk("%sXFS: %pV\n", level, vaf); printk 2072 fs/xfs/xfs_super.c printk(KERN_INFO XFS_VERSION_STRING " with " printk 335 include/acpi/processor.h printk(KERN_WARNING printk 337 include/acpi/processor.h printk(KERN_WARNING printk 55 include/asm-generic/bug.h printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ printk 18 include/asm-generic/hardirq.h printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); printk 290 include/drm/drm_print.h printk##once(KERN_##level "[" DRM_NAME "] " fmt, ##__VA_ARGS__) printk 26 include/linux/ceph/ceph_debug.h printk(KERN_DEBUG fmt, ##__VA_ARGS__); \ printk 544 include/linux/device-mapper.h #define DMDEBUG(fmt, ...) printk(KERN_DEBUG DM_FMT(fmt), ##__VA_ARGS__) printk 196 include/linux/dynamic_debug.h printk(KERN_WARNING "dyndbg param is supported only in " printk 204 include/linux/dynamic_debug.h do { if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); } while (0) printk 80 include/linux/hdlc.h printk("...\n"); printk 83 include/linux/hdlc.h printk(" %02X", skb->data[i]); printk 85 include/linux/hdlc.h printk("\n"); printk 1160 include/linux/hid.h printk(KERN_DEBUG "%s: " fmt, __FILE__, ##__VA_ARGS__); \ printk 1018 include/linux/ide.h printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \ printk 389 include/linux/jbd2.h printk(KERN_ERR \ printk 392 include/linux/jbd2.h printk(KERN_ERR why "\n"); \ printk 170 include/linux/kallsyms.h printk("[<%px>] %pS\n", (void *) ip, (void *) ip); printk 211 include/linux/kprobes.h printk("kretprobe BUG!: Processing kretprobe %p @ %p\n", printk 49 include/linux/libata.h #define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 51 include/linux/libata.h #define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 60 include/linux/libata.h #define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args) printk 106 include/linux/memblock.h if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) printk 258 include/linux/memory_hotplug.h printk(KERN_WARNING "%s() called, with CONFIG_MEMORY_HOTPLUG disabled\n", func); printk 54 include/linux/moduleloader.h printk(KERN_ERR "module %s: REL relocation unsupported\n", printk 77 include/linux/moduleloader.h printk(KERN_ERR "module %s: REL relocation unsupported\n", printk 130 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.15: (0) Device not Available\n"); printk 132 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid " printk 135 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt " printk 138 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region " printk 141 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n"); printk 143 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n"); printk 145 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n"); printk 147 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.4: (1) Program Error\n"); printk 149 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation " printk 152 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.2: (1) Program suspended\n"); printk 154 include/linux/mtd/pfow.h printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt " printk 66 include/linux/parport_pc.h printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d); printk 75 include/linux/parport_pc.h printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n", printk 92 include/linux/parport_pc.h printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]); printk 93 include/linux/parport_pc.h if (ecr & 0x10) printk (",nErrIntrEn"); printk 94 include/linux/parport_pc.h if (ecr & 0x08) printk (",dmaEn"); printk 95 include/linux/parport_pc.h if (ecr & 0x04) printk (",serviceIntr"); printk 96 include/linux/parport_pc.h if (ecr & 0x02) printk (",f_full"); printk 97 include/linux/parport_pc.h if (ecr & 0x01) printk (",f_empty"); printk 99 include/linux/parport_pc.h printk ("] dcr(%s)=[", i ? "soft" : "hard"); printk 103 include/linux/parport_pc.h printk ("rev"); printk 105 include/linux/parport_pc.h printk ("fwd"); printk 107 include/linux/parport_pc.h if (dcr & 0x10) printk (",ackIntEn"); printk 108 include/linux/parport_pc.h if (!(dcr & 0x08)) printk (",N-SELECT-IN"); printk 109 include/linux/parport_pc.h if (dcr & 0x04) printk (",N-INIT"); printk 110 include/linux/parport_pc.h if (!(dcr & 0x02)) printk (",N-AUTOFD"); printk 111 include/linux/parport_pc.h if (!(dcr & 0x01)) printk (",N-STROBE"); printk 113 include/linux/parport_pc.h printk ("] dsr=["); printk 114 include/linux/parport_pc.h if (!(dsr & 0x80)) printk ("BUSY"); printk 115 include/linux/parport_pc.h if (dsr & 0x40) printk (",N-ACK"); printk 116 include/linux/parport_pc.h if (dsr & 0x20) printk (",PERROR"); printk 117 include/linux/parport_pc.h if (dsr & 0x10) printk (",SELECT"); printk 118 include/linux/parport_pc.h if (dsr & 0x08) printk (",N-FAULT"); printk 119 include/linux/parport_pc.h printk ("]\n"); printk 135 include/linux/parport_pc.h printk (KERN_DEBUG printk 166 include/linux/parport_pc.h printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", printk 195 include/linux/parport_pc.h printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", printk 137 include/linux/printk.h printk(fmt, ##__VA_ARGS__); \ printk 171 include/linux/printk.h int printk(const char *fmt, ...); printk 214 include/linux/printk.h int printk(const char *s, ...) printk 293 include/linux/printk.h printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) printk 295 include/linux/printk.h printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) printk 297 include/linux/printk.h printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) printk 299 include/linux/printk.h printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) printk 301 include/linux/printk.h printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) printk 304 include/linux/printk.h printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) printk 306 include/linux/printk.h printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) printk 313 include/linux/printk.h printk(KERN_CONT fmt, ##__VA_ARGS__) printk 318 include/linux/printk.h printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) printk 334 include/linux/printk.h printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) printk 352 include/linux/printk.h printk(fmt, ##__VA_ARGS__); \ printk 420 include/linux/printk.h printk(fmt, ##__VA_ARGS__); \ printk 627 include/linux/ssb/ssb.h printk(KERN_ERR "SSB: BUG! Calling DMA API for " printk 40 include/linux/sunrpc/debug.h printk(KERN_DEFAULT fmt, ##__VA_ARGS__); \ printk 46 include/linux/sunrpc/debug.h printk(KERN_CONT fmt, ##__VA_ARGS__); \ printk 53 include/linux/sunrpc/debug.h printk(KERN_DEFAULT fmt, ##__VA_ARGS__); \ printk 62 include/linux/sunrpc/debug.h printk(KERN_CONT fmt, ##__VA_ARGS__); \ printk 155 include/linux/wimax/debug.h printk(KERN_ERR "E: Corrupt dev %p\n", dev); printk 182 include/linux/wimax/debug.h printk(KERN_ERR "%s%s%s: " f, head, __func__, tag, ##a); \ printk 429 include/linux/wimax/debug.h printk(KERN_ERR "%s: itr->name NULL?? (%p, #%d)\n", printk 438 include/linux/wimax/debug.h printk(KERN_ERR "%s: unknown submodule %s\n", tag, submodule); printk 484 include/linux/wimax/debug.h printk(KERN_ERR "%s: can't parse '%s' as a " printk 446 include/media/dvbdev.h printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \ printk 23 include/media/v4l2-common.h printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) printk 57 include/media/v4l2-common.h printk(level "%s: " fmt, (dev)->name , ## arg) printk 30 include/misc/altera.h printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); printk 183 include/net/dn_dev.h printk(KERN_DEBUG "dn_dev_islocal: Called for non DECnet device\n"); printk 215 include/net/ip_vs.h printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \ printk 233 include/net/ip_vs.h printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \ printk 238 include/net/ip_vs.h printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \ printk 271 include/net/ip_vs.h printk(KERN_DEBUG \ printk 278 include/net/ip_vs.h printk(KERN_DEBUG \ printk 85 include/net/netfilter/nf_conntrack_tuple.h printk("tuple %p: %u %pI4:%hu -> %pI4:%hu\n", printk 95 include/net/netfilter/nf_conntrack_tuple.h printk("tuple %p: %u %pI6 %hu -> %pI6 %hu\n", printk 82 include/net/sock.h printk(KERN_DEBUG msg); } while (0) printk 1202 include/net/sock.h printk(KERN_DEBUG "%s socket %p released, %d are still alive\n", printk 1209 include/net/sock.h printk(KERN_DEBUG "Destruction of the %s socket %p delayed, refcnt=%d\n", printk 295 include/sound/core.h printk(format, ##__VA_ARGS__) printk 3 include/trace/events/printk.h #define TRACE_SYSTEM printk printk 78 include/video/neomagic.h # define DBG(x) printk (KERN_DEBUG "neofb: %s\n", (x)); printk 21 include/video/sstfb.h # define dprintk(X...) printk("sstfb: " X) printk 64 include/video/sstfb.h printk(" :\n"); \ printk 8 include/video/trident.h #define debug(f, a...) printk("%s:" f, __func__ , ## a); printk 99 init/calibrate.c printk(KERN_NOTICE "calibrate_delay_direct() ignoring " printk 138 init/calibrate.c printk(KERN_NOTICE "calibrate_delay_direct() dropping " printk 144 init/calibrate.c printk(KERN_NOTICE "calibrate_delay_direct() dropping " printk 164 init/calibrate.c printk(KERN_NOTICE "calibrate_delay_direct() failed to get a good " printk 396 init/do_mounts.c printk(KERN_INFO printk 434 init/do_mounts.c printk("VFS: Cannot open root device \"%s\" or %s: error %d\n", printk 436 init/do_mounts.c printk("Please append a correct \"root=\" boot option; here are the available partitions:\n"); printk 440 init/do_mounts.c printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify " printk 450 init/do_mounts.c printk("List of all partitions:\n"); printk 452 init/do_mounts.c printk("No filesystem could mount root, tried: "); printk 454 init/do_mounts.c printk(" %s", p); printk 455 init/do_mounts.c printk("\n"); printk 520 init/do_mounts.c printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf); printk 541 init/do_mounts.c printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); printk 576 init/do_mounts.c printk(KERN_INFO "Waiting %d sec before mounting root device...\n", printk 609 init/do_mounts.c printk(KERN_INFO "Waiting for root device %s...\n", printk 105 init/do_mounts_initrd.c printk(KERN_NOTICE "Trying to move old root to /initrd ... "); printk 108 init/do_mounts_initrd.c printk("okay\n"); printk 112 init/do_mounts_initrd.c printk("/initrd does not exist. Ignored.\n"); printk 114 init/do_mounts_initrd.c printk("failed\n"); printk 115 init/do_mounts_initrd.c printk(KERN_NOTICE "Unmounting old root\n"); printk 117 init/do_mounts_initrd.c printk(KERN_NOTICE "Trying to free ramdisk memory ... "); printk 124 init/do_mounts_initrd.c printk(!error ? "okay\n" : "failed\n"); printk 66 init/do_mounts_md.c printk(KERN_WARNING "md: Too few arguments supplied to md=.\n"); printk 73 init/do_mounts_md.c printk(KERN_WARNING "md: md=%s%d, Specified more than once. " printk 78 init/do_mounts_md.c printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor); printk 88 init/do_mounts_md.c printk(KERN_WARNING "md: Too few arguments supplied to md=.\n"); printk 108 init/do_mounts_md.c printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n", printk 157 init/do_mounts_md.c printk(KERN_WARNING "md: Unknown device name: %s\n", devname); printk 170 init/do_mounts_md.c printk(KERN_INFO "md: Loading md%s%d: %s\n", printk 176 init/do_mounts_md.c printk(KERN_ERR "md: open failed - cannot start " printk 181 init/do_mounts_md.c printk(KERN_WARNING printk 230 init/do_mounts_md.c printk(KERN_WARNING "md: starting md%d failed\n", minor); printk 283 init/do_mounts_md.c printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n"); printk 284 init/do_mounts_md.c printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n"); printk 300 init/do_mounts_md.c printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n"); printk 88 init/do_mounts_rd.c printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n", printk 91 init/do_mounts_rd.c printk(KERN_EMERG printk 101 init/do_mounts_rd.c printk(KERN_NOTICE printk 109 init/do_mounts_rd.c printk(KERN_NOTICE printk 118 init/do_mounts_rd.c printk(KERN_NOTICE printk 133 init/do_mounts_rd.c printk(KERN_NOTICE printk 149 init/do_mounts_rd.c printk(KERN_NOTICE printk 159 init/do_mounts_rd.c printk(KERN_NOTICE printk 166 init/do_mounts_rd.c printk(KERN_NOTICE printk 217 init/do_mounts_rd.c printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n", printk 234 init/do_mounts_rd.c printk(KERN_ERR "RAMDISK: could not determine device size\n"); printk 240 init/do_mounts_rd.c printk(KERN_ERR "RAMDISK: could not allocate buffer\n"); printk 244 init/do_mounts_rd.c printk(KERN_NOTICE "RAMDISK: Loading %dKiB [%ld disk%s] into ram disk... ", printk 251 init/do_mounts_rd.c printk("Error closing the disk.\n"); printk 257 init/do_mounts_rd.c printk("Error opening disk.\n"); printk 260 init/do_mounts_rd.c printk("Loading disk #%d... ", disk); printk 302 init/do_mounts_rd.c printk(KERN_ERR "RAMDISK: error while reading compressed data"); printk 304 init/do_mounts_rd.c printk(KERN_ERR "RAMDISK: EOF while reading compressed data"); printk 313 init/do_mounts_rd.c printk(KERN_ERR printk 324 init/do_mounts_rd.c printk(KERN_ERR "%s\n", x); printk 627 init/initramfs.c printk(KERN_INFO "rootfs image is not initramfs (%s); looks like an initrd\n", printk 642 init/initramfs.c printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err); printk 657 init/initramfs.c printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n"); printk 659 init/initramfs.c printk(KERN_INFO "Unpacking initramfs...\n"); printk 882 init/main.c printk(KERN_DEBUG "calling %pS @ %i\n", fn, task_pid_nr(current)); printk 896 init/main.c printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs\n", printk 37 init/noinitramfs.c printk(KERN_WARNING "Failed to create a rootfs\n"); printk 5784 kernel/cgroup/cgroup.c printk(KERN_INFO "Disabling %s control group subsystem\n", printk 5790 kernel/cgroup/cgroup.c printk(KERN_INFO "Disabling %s control group subsystem in v1 mounts\n", printk 22 kernel/cred.c printk("[%-5.5s%5u] " FMT "\n", \ printk 804 kernel/cred.c printk(KERN_ERR "CRED: %s credentials: %p %s%s%s\n", printk 809 kernel/cred.c printk(KERN_ERR "CRED: ->magic=%x, put_addr=%p\n", printk 811 kernel/cred.c printk(KERN_ERR "CRED: ->usage=%d, subscr=%d\n", printk 814 kernel/cred.c printk(KERN_ERR "CRED: ->*uid = { %d,%d,%d,%d }\n", printk 819 kernel/cred.c printk(KERN_ERR "CRED: ->*gid = { %d,%d,%d,%d }\n", printk 825 kernel/cred.c printk(KERN_ERR "CRED: ->security is %p\n", cred->security); printk 829 kernel/cred.c printk(KERN_ERR "CRED: ->security {%x, %x}\n", printk 840 kernel/cred.c printk(KERN_ERR "CRED: Invalid credentials\n"); printk 841 kernel/cred.c printk(KERN_ERR "CRED: At %s:%u\n", file, line); printk 867 kernel/cred.c printk(KERN_ERR "CRED: Invalid process credentials\n"); printk 868 kernel/cred.c printk(KERN_ERR "CRED: At %s:%u\n", file, line); printk 874 kernel/cred.c printk(KERN_ERR "CRED: Effective creds == Real creds\n"); printk 447 kernel/debug/gdbstub.c printk(KERN_ERR "KGDB: Internal thread select error\n"); printk 681 kernel/debug/gdbstub.c printk(KERN_CRIT "Executing emergency reboot\n"); printk 721 kernel/debug/kdb/kdb_io.c printk("%s", kdb_buffer); printk 782 kernel/debug/kdb/kdb_io.c printk("%s", moreprompt); printk 91 kernel/dma.c printk(KERN_WARNING "Trying to free DMA%d\n", dmanr); printk 96 kernel/dma.c printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr); printk 477 kernel/events/core.c printk(KERN_WARNING printk 2678 kernel/futex.c printk(KERN_ERR "fixup_owner: ret = %d pi-mutex: %p " printk 6 kernel/irq/debug.h #define ___P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f) printk 7 kernel/irq/debug.h #define ___PS(f) if (desc->istate & f) printk("%14s set\n", #f) printk 18 kernel/irq/debug.h printk("irq %d, desc: %p, depth: %d, count: %d, unhandled: %d\n", printk 20 kernel/irq/debug.h printk("->handle_irq(): %p, %pS\n", printk 22 kernel/irq/debug.h printk("->irq_data.chip(): %p, %pS\n", printk 24 kernel/irq/debug.h printk("->action(): %p\n", desc->action); printk 26 kernel/irq/debug.h printk("->action->handler(): %p, %pS\n", printk 55 kernel/irq/handle.c printk(KERN_WARNING "IRQ %d device %s returned IRQ_WAKE_THREAD " printk 528 kernel/irq/irqdesc.c printk(KERN_INFO "NR_IRQS: %d, nr_irqs: %d, preallocated irqs: %d\n", printk 565 kernel/irq/irqdesc.c printk(KERN_INFO "NR_IRQS: %d\n", NR_IRQS); printk 198 kernel/irq/spurious.c printk(KERN_ERR "irq event %d: bogus return value %x\n", printk 201 kernel/irq/spurious.c printk(KERN_ERR "irq %d: nobody cared (try booting with " printk 205 kernel/irq/spurious.c printk(KERN_ERR "handlers:\n"); printk 215 kernel/irq/spurious.c printk(KERN_ERR "[<%p>] %ps", action->handler, action->handler); printk 217 kernel/irq/spurious.c printk(KERN_CONT " threaded [<%p>] %ps", printk 219 kernel/irq/spurious.c printk(KERN_CONT "\n"); printk 418 kernel/irq/spurious.c printk(KERN_EMERG "Disabling IRQ #%d\n", irq); printk 434 kernel/irq/spurious.c printk(KERN_INFO "IRQ lockup detection disabled\n"); printk 446 kernel/irq/spurious.c printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n"); printk 447 kernel/irq/spurious.c printk(KERN_WARNING "This may impact system performance.\n"); printk 458 kernel/irq/spurious.c printk(KERN_WARNING "Misrouted IRQ fixup and polling support " printk 460 kernel/irq/spurious.c printk(KERN_WARNING "This may significantly impact system " printk 857 kernel/kprobes.c printk(KERN_INFO "Kprobes globally optimized\n"); printk 889 kernel/kprobes.c printk(KERN_INFO "Kprobes globally unoptimized\n"); printk 967 kernel/kprobes.c printk(KERN_ERR "Error: There should be no unused kprobe here.\n"); printk 2296 kernel/kprobes.c printk("kretprobe: lookup failed: %s\n", printk 442 kernel/locking/lockdep.c printk(KERN_DEBUG "%s\n", bug_msg); printk 443 kernel/locking/lockdep.c printk(KERN_DEBUG "turning off the locking correctness validator.\n"); printk 445 kernel/locking/lockdep.c printk(KERN_DEBUG "Please attach the output of /proc/lock_stat to the bug report\n"); printk 638 kernel/locking/lockdep.c printk(KERN_CONT "%s", name); printk 640 kernel/locking/lockdep.c printk(KERN_CONT "%s", name); printk 642 kernel/locking/lockdep.c printk(KERN_CONT "#%d", class->name_version); printk 644 kernel/locking/lockdep.c printk(KERN_CONT "/%d", class->subclass); printk 654 kernel/locking/lockdep.c printk(KERN_CONT " ("); printk 656 kernel/locking/lockdep.c printk(KERN_CONT "){%s}", usage); printk 668 kernel/locking/lockdep.c printk(KERN_CONT "%s", name); printk 686 kernel/locking/lockdep.c printk(KERN_CONT "<RELEASED>\n"); printk 690 kernel/locking/lockdep.c printk(KERN_CONT "%px", hlock->instance); printk 692 kernel/locking/lockdep.c printk(KERN_CONT ", at: %pS\n", (void *)hlock->acquire_ip); printk 700 kernel/locking/lockdep.c printk("no locks held by %s/%d.\n", p->comm, task_pid_nr(p)); printk 702 kernel/locking/lockdep.c printk("%d lock%s held by %s/%d:\n", depth, printk 711 kernel/locking/lockdep.c printk(" #%d: ", i); printk 718 kernel/locking/lockdep.c printk("%s %.*s %s\n", init_utsname()->release, printk 799 kernel/locking/lockdep.c printk(KERN_ERR printk 801 kernel/locking/lockdep.c printk(KERN_ERR printk 926 kernel/locking/lockdep.c printk(KERN_INFO "class %s: mismatch for lock entry %ld; class %s <> %s", printk 956 kernel/locking/lockdep.c printk(KERN_INFO "chain %lld: key %#llx <> %#llx\n", printk 993 kernel/locking/lockdep.c printk(KERN_INFO "class %px/%s is not in any class list\n", printk 1024 kernel/locking/lockdep.c printk(KERN_INFO "list entry %d is not in any class list; class %s <> %s\n", printk 1039 kernel/locking/lockdep.c printk(KERN_INFO "list entry %d occurs in a class list; class %s <> %s\n", printk 1247 kernel/locking/lockdep.c printk("\nnew class %px: %s", class->key, class->name); printk 1249 kernel/locking/lockdep.c printk(KERN_CONT "#%d", class->name_version); printk 1250 kernel/locking/lockdep.c printk(KERN_CONT "\n"); printk 1555 kernel/locking/lockdep.c printk("\n-> #%u", depth); printk 1557 kernel/locking/lockdep.c printk(KERN_CONT ":\n"); printk 1584 kernel/locking/lockdep.c printk("Chain exists of:\n "); printk 1586 kernel/locking/lockdep.c printk(KERN_CONT " --> "); printk 1588 kernel/locking/lockdep.c printk(KERN_CONT " --> "); printk 1590 kernel/locking/lockdep.c printk(KERN_CONT "\n\n"); printk 1593 kernel/locking/lockdep.c printk(" Possible unsafe locking scenario:\n\n"); printk 1594 kernel/locking/lockdep.c printk(" CPU0 CPU1\n"); printk 1595 kernel/locking/lockdep.c printk(" ---- ----\n"); printk 1596 kernel/locking/lockdep.c printk(" lock("); printk 1598 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 1599 kernel/locking/lockdep.c printk(" lock("); printk 1601 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 1602 kernel/locking/lockdep.c printk(" lock("); printk 1604 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 1605 kernel/locking/lockdep.c printk(" lock("); printk 1607 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 1608 kernel/locking/lockdep.c printk("\n *** DEADLOCK ***\n\n"); printk 1677 kernel/locking/lockdep.c printk("\nother info that might help us debug this:\n\n"); printk 1683 kernel/locking/lockdep.c printk("\nstack backtrace:\n"); printk 1920 kernel/locking/lockdep.c printk("%*s->", depth, ""); printk 1923 kernel/locking/lockdep.c printk(KERN_CONT " ops: %lu", debug_class_ops_read(class)); printk 1925 kernel/locking/lockdep.c printk(KERN_CONT " {\n"); printk 1931 kernel/locking/lockdep.c len += printk("%*s %s", depth, "", usage_str[bit]); printk 1932 kernel/locking/lockdep.c len += printk(KERN_CONT " at:\n"); printk 1936 kernel/locking/lockdep.c printk("%*s }\n", depth, ""); printk 1938 kernel/locking/lockdep.c printk("%*s ... key at: [<%px>] %pS\n", printk 1957 kernel/locking/lockdep.c printk("%*s ... acquired at:\n", depth, ""); printk 1959 kernel/locking/lockdep.c printk("\n"); printk 1962 kernel/locking/lockdep.c printk("lockdep:%s bad path found in chain graph\n", __func__); printk 1998 kernel/locking/lockdep.c printk("Chain exists of:\n "); printk 2000 kernel/locking/lockdep.c printk(KERN_CONT " --> "); printk 2002 kernel/locking/lockdep.c printk(KERN_CONT " --> "); printk 2004 kernel/locking/lockdep.c printk(KERN_CONT "\n\n"); printk 2007 kernel/locking/lockdep.c printk(" Possible interrupt unsafe locking scenario:\n\n"); printk 2008 kernel/locking/lockdep.c printk(" CPU0 CPU1\n"); printk 2009 kernel/locking/lockdep.c printk(" ---- ----\n"); printk 2010 kernel/locking/lockdep.c printk(" lock("); printk 2012 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 2013 kernel/locking/lockdep.c printk(" local_irq_disable();\n"); printk 2014 kernel/locking/lockdep.c printk(" lock("); printk 2016 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 2017 kernel/locking/lockdep.c printk(" lock("); printk 2019 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 2020 kernel/locking/lockdep.c printk(" <Interrupt>\n"); printk 2021 kernel/locking/lockdep.c printk(" lock("); printk 2023 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 2024 kernel/locking/lockdep.c printk("\n *** DEADLOCK ***\n\n"); printk 2338 kernel/locking/lockdep.c printk(" Possible unsafe locking scenario:\n\n"); printk 2339 kernel/locking/lockdep.c printk(" CPU0\n"); printk 2340 kernel/locking/lockdep.c printk(" ----\n"); printk 2341 kernel/locking/lockdep.c printk(" lock("); printk 2343 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 2344 kernel/locking/lockdep.c printk(" lock("); printk 2346 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 2347 kernel/locking/lockdep.c printk("\n *** DEADLOCK ***\n\n"); printk 2348 kernel/locking/lockdep.c printk(" May be due to missing lock nesting notation\n\n"); printk 2664 kernel/locking/lockdep.c printk(" class_idx:%d -> chain_key:%016Lx", printk 2678 kernel/locking/lockdep.c printk("depth: %u (irq_context %u)\n", depth - i + 1, printk 2697 kernel/locking/lockdep.c printk("depth: %u\n", chain->depth); printk 2703 kernel/locking/lockdep.c printk("\n"); printk 2892 kernel/locking/lockdep.c printk("\nhash chain already cached, key: " printk 2902 kernel/locking/lockdep.c printk("\nnew hash chain, key: %016Lx tail class: [%px] %s\n", printk 3057 kernel/locking/lockdep.c printk(" Possible unsafe locking scenario:\n\n"); printk 3058 kernel/locking/lockdep.c printk(" CPU0\n"); printk 3059 kernel/locking/lockdep.c printk(" ----\n"); printk 3060 kernel/locking/lockdep.c printk(" lock("); printk 3062 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 3063 kernel/locking/lockdep.c printk(" <Interrupt>\n"); printk 3064 kernel/locking/lockdep.c printk(" lock("); printk 3066 kernel/locking/lockdep.c printk(KERN_CONT ");\n"); printk 3067 kernel/locking/lockdep.c printk("\n *** DEADLOCK ***\n\n"); printk 3241 kernel/locking/lockdep.c printk("irq event stamp: %u\n", curr->irq_events); printk 3242 kernel/locking/lockdep.c printk("hardirqs last enabled at (%u): [<%px>] %pS\n", printk 3245 kernel/locking/lockdep.c printk("hardirqs last disabled at (%u): [<%px>] %pS\n", printk 3248 kernel/locking/lockdep.c printk("softirqs last enabled at (%u): [<%px>] %pS\n", printk 3251 kernel/locking/lockdep.c printk("softirqs last disabled at (%u): [<%px>] %pS\n", printk 3680 kernel/locking/lockdep.c printk("\nmarked lock as {%s}:\n", usage_str[new_bit]); printk 3746 kernel/locking/lockdep.c printk(KERN_ERR "BUG: key %px has not been registered!\n", key); printk 3848 kernel/locking/lockdep.c printk("\nacquire class [%px] %s", class->key, class->name); printk 3850 kernel/locking/lockdep.c printk(KERN_CONT "#%d", class->name_version); printk 3851 kernel/locking/lockdep.c printk(KERN_CONT "\n"); printk 3971 kernel/locking/lockdep.c printk(KERN_DEBUG "depth: %i max: %lu!\n", printk 4408 kernel/locking/lockdep.c printk("possible reason: unannotated irqs-off.\n"); printk 4412 kernel/locking/lockdep.c printk("possible reason: unannotated irqs-on.\n"); printk 5211 kernel/locking/lockdep.c printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n"); printk 5213 kernel/locking/lockdep.c printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES); printk 5214 kernel/locking/lockdep.c printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH); printk 5215 kernel/locking/lockdep.c printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS); printk 5216 kernel/locking/lockdep.c printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE); printk 5217 kernel/locking/lockdep.c printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES); printk 5218 kernel/locking/lockdep.c printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS); printk 5219 kernel/locking/lockdep.c printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE); printk 5221 kernel/locking/lockdep.c printk(" memory used by lock dependency info: %zu kB\n", printk 5239 kernel/locking/lockdep.c printk(" memory used for stack traces: %zu kB\n", printk 5244 kernel/locking/lockdep.c printk(" per task-struct memory footprint: %zu bytes\n", printk 5367 kernel/locking/lockdep.c printk("INFO: lockdep is turned off.\n"); printk 38 kernel/locking/rtmutex-debug.c printk("%16s:%5d [%p, %3d]", p->comm, task_pid_nr(p), p, p->prio); printk 40 kernel/locking/rtmutex-debug.c printk("<none>"); printk 46 kernel/locking/rtmutex-debug.c printk(" [%p] {%s}\n", printk 49 kernel/locking/rtmutex-debug.c printk(" [%p] {%s:%d}\n", printk 53 kernel/locking/rtmutex-debug.c printk(".. ->owner: %p\n", lock->owner); printk 54 kernel/locking/rtmutex-debug.c printk(".. held by: "); printk 56 kernel/locking/rtmutex-debug.c printk("\n"); printk 111 kernel/locking/rtmutex-debug.c printk("%s/%d is deadlocking current task %s/%d\n\n", printk 115 kernel/locking/rtmutex-debug.c printk("\n1) %s/%d is trying to acquire this lock:\n", printk 119 kernel/locking/rtmutex-debug.c printk("\n2) %s/%d is blocked on this lock:\n", printk 126 kernel/locking/rtmutex-debug.c printk("\n%s/%d's [blocked] stackdump:\n\n", printk 129 kernel/locking/rtmutex-debug.c printk("\n%s/%d's [current] stackdump:\n\n", printk 135 kernel/locking/rtmutex-debug.c printk("[ turning off deadlock detection." printk 484 kernel/locking/rtmutex.c printk(KERN_WARNING "Maximum lock depth %d reached " printk 58 kernel/locking/spinlock_debug.c printk(KERN_EMERG "BUG: spinlock %s on CPU#%d, %s/%d\n", printk 61 kernel/locking/spinlock_debug.c printk(KERN_EMERG " lock: %pS, .magic: %08x, .owner: %s/%d, " printk 147 kernel/locking/spinlock_debug.c printk(KERN_EMERG "BUG: rwlock %s on CPU#%d, %s/%d, %p\n", printk 4531 kernel/module.c printk(KERN_DEFAULT "Modules linked in:"); printk 946 kernel/params.c printk(KERN_WARNING "%s (%d): error creating kset\n", printk 530 kernel/power/main.c printk(KERN_DEBUG "PM: %pV", &vaf); printk 81 kernel/power/suspend_test.c printk(err_readtime, dev_name(&rtc->dev), status); printk 92 kernel/power/suspend_test.c printk(err_wakealarm, dev_name(&rtc->dev), status); printk 97 kernel/power/suspend_test.c printk(info_test, pm_states[state]); printk 103 kernel/power/suspend_test.c printk(info_test, pm_states[state]); printk 109 kernel/power/suspend_test.c printk(info_test, pm_states[state]); printk 114 kernel/power/suspend_test.c printk(err_suspend, status); printk 174 kernel/power/suspend_test.c printk(warn_bad_state, suspend_type); printk 199 kernel/power/suspend_test.c printk(warn_bad_state, test_state_label); printk 210 kernel/power/suspend_test.c printk(warn_no_rtc); printk 2089 kernel/printk/printk.c EXPORT_SYMBOL(printk); printk 856 kernel/relay.c printk(KERN_WARNING "relay: one or more items not logged " printk 257 kernel/resource.c printk(KERN_DEBUG "release child resource %pR\n", tmp); printk 904 kernel/resource.c printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name); printk 1226 kernel/resource.c printk(KERN_WARNING "Trying to free nonexistent resource " printk 1560 kernel/resource.c printk(KERN_WARNING "resource sanity check: requesting [mem %#010llx-%#010llx], which spans more than %s %pR\n", printk 100 kernel/sched/autogroup.c printk(KERN_WARNING "autogroup_create: %s failure.\n", printk 135 kernel/sched/clock.c printk(KERN_INFO "sched_clock: Marking stable (%lld, %lld)->(%lld, %lld)\n", printk 170 kernel/sched/clock.c printk(KERN_WARNING "TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.\n"); printk 171 kernel/sched/clock.c printk(KERN_INFO "sched_clock: Marking unstable (%lld, %lld)<-(%lld, %lld)\n", printk 3850 kernel/sched/core.c printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n", printk 3882 kernel/sched/core.c printk(KERN_ERR "BUG: scheduling in a non-blocking section: %s/%d/%i\n", printk 5926 kernel/sched/core.c printk(KERN_INFO "%-15.15s %c", p->comm, task_state_to_char(p)); printk 5929 kernel/sched/core.c printk(KERN_CONT " running task "); printk 5938 kernel/sched/core.c printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free, printk 5975 kernel/sched/core.c printk(KERN_INFO printk 5978 kernel/sched/core.c printk(KERN_INFO printk 6769 kernel/sched/core.c printk(KERN_ERR printk 6772 kernel/sched/core.c printk(KERN_ERR printk 6778 kernel/sched/core.c printk(KERN_EMERG "Thread overran stack, or stack corrupted\n"); printk 6811 kernel/sched/core.c printk(KERN_ERR "BUG: assuming atomic context at %s:%d\n", file, line); printk 6812 kernel/sched/core.c printk(KERN_ERR "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n", printk 415 kernel/sched/idle.c printk(KERN_ERR "bad: scheduling from the idle thread!\n"); printk 35 kernel/sched/topology.c printk(KERN_DEBUG "%*s domain-%d: ", level, "", level); printk 38 kernel/sched/topology.c printk("does not load-balance\n"); printk 40 kernel/sched/topology.c printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain has parent"); printk 44 kernel/sched/topology.c printk(KERN_CONT "span=%*pbl level=%s\n", printk 48 kernel/sched/topology.c printk(KERN_ERR "ERROR: domain->span does not contain CPU%d\n", cpu); printk 51 kernel/sched/topology.c printk(KERN_ERR "ERROR: domain->groups does not contain CPU%d\n", cpu); printk 54 kernel/sched/topology.c printk(KERN_DEBUG "%*s groups:", level + 1, ""); printk 57 kernel/sched/topology.c printk("\n"); printk 58 kernel/sched/topology.c printk(KERN_ERR "ERROR: group is NULL\n"); printk 63 kernel/sched/topology.c printk(KERN_CONT "\n"); printk 64 kernel/sched/topology.c printk(KERN_ERR "ERROR: empty group\n"); printk 70 kernel/sched/topology.c printk(KERN_CONT "\n"); printk 71 kernel/sched/topology.c printk(KERN_ERR "ERROR: repeated CPUs\n"); printk 77 kernel/sched/topology.c printk(KERN_CONT " %d:{ span=%*pbl", printk 83 kernel/sched/topology.c printk(KERN_CONT " mask=%*pbl", printk 88 kernel/sched/topology.c printk(KERN_CONT " cap=%lu", group->sgc->capacity); printk 93 kernel/sched/topology.c printk(KERN_ERR "ERROR: domain->groups does not match domain->child\n"); printk 96 kernel/sched/topology.c printk(KERN_CONT " }"); printk 101 kernel/sched/topology.c printk(KERN_CONT ","); printk 104 kernel/sched/topology.c printk(KERN_CONT "\n"); printk 107 kernel/sched/topology.c printk(KERN_ERR "ERROR: groups don't span domain->span\n"); printk 111 kernel/sched/topology.c printk(KERN_ERR "ERROR: parent span is not a superset of domain->span\n"); printk 123 kernel/sched/topology.c printk(KERN_DEBUG "CPU%d attaching NULL sched-domain.\n", cpu); printk 127 kernel/sched/topology.c printk(KERN_DEBUG "CPU%d attaching sched-domain(s):\n", cpu); printk 282 kernel/sched/topology.c printk(KERN_DEBUG "root_domain %*pbl:", cpumask_pr_args(cpu_map)); printk 285 kernel/sched/topology.c printk(KERN_CONT " pd%d:{ cpus=%*pbl nr_cstate=%d }", printk 292 kernel/sched/topology.c printk(KERN_CONT "\n"); printk 1477 kernel/sched/topology.c printk(KERN_WARNING "ERROR: %s\n\n", str); printk 1480 kernel/sched/topology.c printk(KERN_WARNING " "); printk 1482 kernel/sched/topology.c printk(KERN_CONT "%02d ", node_distance(i,j)); printk 1483 kernel/sched/topology.c printk(KERN_CONT "\n"); printk 1485 kernel/sched/topology.c printk(KERN_WARNING "\n"); printk 32 kernel/stacktrace.c printk("%*c%pS\n", 1 + spaces, ' ', (void *)entries[i]); printk 2818 kernel/sysctl.c printk(KERN_WARNING printk 1344 kernel/sysctl_binary.c printk(KERN_INFO printk 1348 kernel/sysctl_binary.c printk(KERN_CONT "%d.", name[i]); printk 1349 kernel/sysctl_binary.c printk(KERN_CONT "\n"); printk 430 kernel/time/ntp.c printk(KERN_NOTICE printk 442 kernel/time/ntp.c printk(KERN_NOTICE printk 1882 kernel/time/timer.c printk(KERN_ERR "schedule_timeout: wrong timeout " printk 1956 kernel/trace/ftrace.c printk(KERN_CONT "%s", fmt); printk 1959 kernel/trace/ftrace.c printk(KERN_CONT "%s%02x", i ? ":" : "", p[i]); printk 4981 kernel/trace/ftrace.c printk(KERN_DEBUG "ftrace: function %s not " printk 6288 kernel/trace/ftrace.c printk("ftrace ops had %pS for function\n", printk 1708 kernel/trace/trace.c printk(KERN_CONT "FAILED!\n"); printk 1727 kernel/trace/trace.c printk(KERN_CONT "PASSED\n"); printk 1865 kernel/trace/trace.c printk(KERN_INFO "Starting tracer '%s'\n", type->name); printk 1875 kernel/trace/trace.c printk(KERN_INFO "Disabling FTRACE selftests due to running tracer '%s'\n", printk 2551 kernel/trace/trace.c printk("%s", iter->seq.buffer); printk 8894 kernel/trace/trace.c printk(KERN_TRACE "%s", s->buffer); printk 8969 kernel/trace/trace.c printk(KERN_TRACE "Bad dumping mode, switching to all CPUs dump\n"); printk 8973 kernel/trace/trace.c printk(KERN_TRACE "Dumping ftrace buffer:\n"); printk 8977 kernel/trace/trace.c printk("# WARNING: FUNCTION TRACING IS CORRUPTED\n"); printk 8978 kernel/trace/trace.c printk("# MAY BE MISSING FUNCTION EVENTS\n"); printk 8991 kernel/trace/trace.c printk(KERN_TRACE "---------------------------------\n"); printk 9011 kernel/trace/trace.c printk(KERN_TRACE " (ftrace buffer empty)\n"); printk 9013 kernel/trace/trace.c printk(KERN_TRACE "---------------------------------\n"); printk 9174 kernel/trace/trace.c printk(KERN_ERR "tracer: failed to allocate ring buffer!\n"); printk 9273 kernel/trace/trace.c printk(KERN_INFO "ftrace bootup tracer '%s' not registered.\n", printk 9293 kernel/trace/trace.c printk(KERN_WARNING printk 78 kernel/trace/trace.h #define FTRACE_ENTRY_DUP(name, name_struct, id, tstruct, printk, filter) printk 190 kernel/trace/trace_branch.c printk(KERN_WARNING "Warning: could not register " printk 383 kernel/trace/trace_branch.c printk(KERN_WARNING "Warning: could not register " printk 448 kernel/trace/trace_branch.c printk(KERN_WARNING "Warning: could not register " printk 2185 kernel/trace/trace_events_filter.c printk(KERN_INFO "\npred visited %s\n", field->name); printk 2217 kernel/trace/trace_events_filter.c printk(KERN_INFO "Testing ftrace filter: "); printk 2227 kernel/trace/trace_events_filter.c printk(KERN_INFO printk 2253 kernel/trace/trace_events_filter.c printk(KERN_INFO printk 2260 kernel/trace/trace_events_filter.c printk(KERN_INFO printk 2268 kernel/trace/trace_events_filter.c printk(KERN_CONT "OK\n"); printk 72 kernel/trace/trace_export.c printk(print); \ printk 576 kernel/trace/trace_irqsoff.c printk(KERN_ERR "failed to start irqsoff tracer\n"); printk 71 kernel/trace/trace_nop.c printk(KERN_DEBUG "nop_test_accept flag set to %d: we accept." printk 78 kernel/trace/trace_nop.c printk(KERN_DEBUG "nop_test_refuse flag set to %d: we refuse." printk 752 kernel/trace/trace_output.c printk(KERN_WARNING "Need to add type to trace.h\n"); printk 1379 kernel/trace/trace_output.c printk(KERN_WARNING "event %d failed to register\n", printk 648 kernel/trace/trace_sched_wakeup.c printk(KERN_ERR "failed to start wakeup tracer\n"); printk 41 kernel/trace/trace_selftest.c printk(KERN_CONT ".. bad ring buffer "); printk 45 kernel/trace/trace_selftest.c printk(KERN_CONT ".. invalid entry %d ", printk 55 kernel/trace/trace_selftest.c printk(KERN_CONT ".. corrupted trace buffer .. "); printk 99 kernel/trace/trace_selftest.c printk(KERN_WARNING "Failed to init %s tracer, init returned %d\n", printk 168 kernel/trace/trace_selftest.c printk("(%d %d %d %d %d) ", printk 195 kernel/trace/trace_selftest.c printk(KERN_CONT "PASSED\n"); printk 255 kernel/trace/trace_selftest.c printk("MEMORY ERROR "); printk 335 kernel/trace/trace_selftest.c printk(KERN_CONT "PASSED\n"); printk 371 kernel/trace/trace_selftest.c printk(KERN_CONT ".. filter did not filter .. "); printk 394 kernel/trace/trace_selftest.c printk(KERN_CONT ".. filter failed count=%ld ..", count); printk 661 kernel/trace/trace_selftest.c printk(KERN_CONT " ... kernel command line filter set: force PASS ... "); printk 692 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 732 kernel/trace/trace_selftest.c printk(KERN_WARNING "BUG: Function graph tracer hang!\n"); printk 762 kernel/trace/trace_selftest.c printk(KERN_CONT " ... kernel command line filter set: force PASS ... "); printk 802 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 858 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 885 kernel/trace/trace_selftest.c printk(KERN_CONT "can not test ... force "); printk 920 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 947 kernel/trace/trace_selftest.c printk(KERN_CONT "can not test ... force "); printk 988 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 1016 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 1100 kernel/trace/trace_selftest.c printk(KERN_CONT "Failed to create ftrace wakeup test thread "); printk 1153 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 1185 kernel/trace/trace_selftest.c printk(KERN_CONT ".. no entries found .."); printk 125 kernel/tracepoint.c printk(KERN_DEBUG "Probe %d : %p\n", i, funcs[i].func); printk 4625 kernel/workqueue.c printk("%sWorkqueue: %s %ps", log_lvl, name, fn); printk 1276 lib/bch.c printk(KERN_ERR "bch encoder/decoder was configured to support " printk 191 lib/bug.c printk(KERN_DEFAULT CUT_HERE); printk 119 lib/cpumask.c printk(KERN_ERR "=> alloc_cpumask_var: failed!\n"); printk 47 lib/dump_stack.c printk("%sCPU: %d PID: %d Comm: %.20s %s%s %s %.*s\n", printk 56 lib/dump_stack.c printk("%sHardware name: %s\n", printk 567 lib/dynamic_debug.c printk(KERN_DEBUG "%s%pV", dynamic_emit_prefix(descriptor, buf), &vaf); printk 588 lib/dynamic_debug.c printk(KERN_DEBUG "(NULL device *): %pV", &vaf); printk 629 lib/dynamic_debug.c printk(KERN_DEBUG "%s%s: %pV", netdev_name(dev), printk 632 lib/dynamic_debug.c printk(KERN_DEBUG "(NULL net_device): %pV", &vaf); printk 665 lib/dynamic_debug.c printk(KERN_DEBUG "%s: %pV", dev_name(&ibdev->dev), &vaf); printk 667 lib/dynamic_debug.c printk(KERN_DEBUG "(NULL ib_device): %pV", &vaf); printk 28 lib/fault-inject.c printk(KERN_WARNING printk 45 lib/fault-inject.c printk(KERN_NOTICE "FAULT_INJECTION: forcing a failure.\n" printk 39 lib/globtest.c printk(message, pat, str, mismatch + 3*match); printk 154 lib/globtest.c printk(message, successes, n); printk 259 lib/hexdump.c printk("%s%s%p: %s\n", printk 263 lib/hexdump.c printk("%s%s%.8x: %s\n", level, prefix_str, i, linebuf); printk 266 lib/hexdump.c printk("%s%s%s\n", level, prefix_str, linebuf); printk 79 lib/interval_tree_test.c printk(KERN_ALERT "interval tree insert/remove"); printk 97 lib/interval_tree_test.c printk(" -> %llu cycles\n", (unsigned long long)time); printk 99 lib/interval_tree_test.c printk(KERN_ALERT "interval tree search"); printk 120 lib/interval_tree_test.c printk(" -> %llu cycles (%lu results)\n", printk 131 lib/interval_tree_test.c printk(KERN_ALERT "test exit\n"); printk 346 lib/iov_iter.c printk(KERN_ERR "idx = %d, offset = %zd\n", i->idx, i->iov_offset); printk 347 lib/iov_iter.c printk(KERN_ERR "curbuf = %d, nrbufs = %d, buffers = %d\n", printk 350 lib/iov_iter.c printk(KERN_ERR "[%p %p %d %d]\n", printk 1189 lib/locking-selftest.c printk("%33s:", testname); printk 1895 lib/locking-selftest.c printk(" --------------------------------------------------------------------------\n"); printk 1896 lib/locking-selftest.c printk(" | Wound/wait tests |\n"); printk 1897 lib/locking-selftest.c printk(" ---------------------\n"); printk 1940 lib/locking-selftest.c printk(" -----------------------------------------------------\n"); printk 1941 lib/locking-selftest.c printk(" |block | try |context|\n"); printk 1942 lib/locking-selftest.c printk(" -----------------------------------------------------\n"); printk 1975 lib/locking-selftest.c printk("----------------------------------\n"); printk 1976 lib/locking-selftest.c printk("| Locking API testsuite disabled |\n"); printk 1977 lib/locking-selftest.c printk("----------------------------------\n"); printk 1984 lib/locking-selftest.c printk("------------------------\n"); printk 1985 lib/locking-selftest.c printk("| Locking API testsuite:\n"); printk 1986 lib/locking-selftest.c printk("----------------------------------------------------------------------------\n"); printk 1987 lib/locking-selftest.c printk(" | spin |wlock |rlock |mutex | wsem | rsem |\n"); printk 1988 lib/locking-selftest.c printk(" --------------------------------------------------------------------------\n"); printk 2004 lib/locking-selftest.c printk(" --------------------------------------------------------------------------\n"); printk 2059 lib/locking-selftest.c printk(" --------------------------------------------------------------------------\n"); printk 2077 lib/locking-selftest.c printk("-----------------------------------------------------------------\n"); printk 2079 lib/locking-selftest.c printk("BUG: %3d unexpected failures (out of %3d) - debugging disabled! |\n", printk 2081 lib/locking-selftest.c printk("-----------------------------------------------------------------\n"); printk 2083 lib/locking-selftest.c printk("--------------------------------------------------------\n"); printk 2084 lib/locking-selftest.c printk("%3d out of %3d testcases failed, as expected. |\n", printk 2086 lib/locking-selftest.c printk("----------------------------------------------------\n"); printk 2089 lib/locking-selftest.c printk("--------------------------------------------------------\n"); printk 2090 lib/locking-selftest.c printk("All %3d testcases failed, as expected. |\n", printk 2092 lib/locking-selftest.c printk("----------------------------------------\n"); printk 2095 lib/locking-selftest.c printk("-------------------------------------------------------\n"); printk 2096 lib/locking-selftest.c printk("Good, all %3d testcases passed! |\n", printk 2098 lib/locking-selftest.c printk("---------------------------------\n"); printk 27 lib/mpi/mpi-internal.h #define log_debug printk printk 28 lib/mpi/mpi-internal.h #define log_bug printk printk 225 lib/plist.c printk(KERN_DEBUG "start plist test\n"); printk 257 lib/plist.c printk(KERN_DEBUG "end plist test\n"); printk 252 lib/rbtree_test.c printk(KERN_ALERT "rbtree testing"); printk 270 lib/rbtree_test.c printk(" -> test 1 (latency of nnodes insert+delete): %llu cycles\n", printk 286 lib/rbtree_test.c printk(" -> test 2 (latency of nnodes cached insert+delete): %llu cycles\n", printk 303 lib/rbtree_test.c printk(" -> test 3 (latency of inorder traversal): %llu cycles\n", printk 315 lib/rbtree_test.c printk(" -> test 4 (latency to fetch first node)\n"); printk 316 lib/rbtree_test.c printk(" non-cached: %llu cycles\n", (unsigned long long)time); printk 327 lib/rbtree_test.c printk(" cached: %llu cycles\n", (unsigned long long)time); printk 346 lib/rbtree_test.c printk(KERN_ALERT "augmented rbtree testing"); printk 363 lib/rbtree_test.c printk(" -> test 1 (latency of nnodes insert+delete): %llu cycles\n", (unsigned long long)time); printk 378 lib/rbtree_test.c printk(" -> test 2 (latency of nnodes cached insert+delete): %llu cycles\n", (unsigned long long)time); printk 400 lib/rbtree_test.c printk(KERN_ALERT "test exit\n"); printk 152 lib/sg_pool.c printk(KERN_ERR "SG_POOL: can't init sg slab %s\n", printk 160 lib/sg_pool.c printk(KERN_ERR "SG_POOL: can't init sg mempool %s\n", printk 16 lib/show_mem.c printk("Mem-Info:\n"); printk 35 lib/show_mem.c printk("%lu pages RAM\n", total); printk 36 lib/show_mem.c printk("%lu pages HighMem/MovableOnly\n", highmem); printk 37 lib/show_mem.c printk("%lu pages reserved\n", reserved); printk 39 lib/show_mem.c printk("%lu pages cma reserved\n", totalcma_pages); printk 42 lib/show_mem.c printk("%lu pages hwpoisoned\n", atomic_long_read(&num_poisoned_pages)); printk 43 lib/smp_processor_id.c printk(KERN_ERR "BUG: using %s%s() in preemptible [%08x] code: %s/%d\n", printk 46 lib/smp_processor_id.c printk("caller is %pS\n", __builtin_return_address(0)); printk 384 lib/test_bitmap.c printk("set not equal %d %d\n", start, nbits); printk 388 lib/test_bitmap.c printk("set not __equal %d %d\n", start, nbits); printk 395 lib/test_bitmap.c printk("clear not equal %d %d\n", start, nbits); printk 399 lib/test_bitmap.c printk("clear not __equal %d %d\n", start, printk 166 lib/test_ida.c printk("IDA: %u of %u tests passed\n", tests_passed, tests_run); printk 527 lib/test_rhashtable.c printk(KERN_ERR "\n---- ht: ----%s\n-------------\n", buff); printk 26 lib/test_xarray.c printk("BUG at %s:%d\n", __func__, __LINE__); \ printk 1716 lib/test_xarray.c printk("XArray: %u of %u tests passed\n", tests_passed, tests_run); printk 45 lib/ts_bm.c #define DEBUGP printk printk 79 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": opened\n"); printk 88 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": input was truncated\n"); printk 90 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": closed\n"); printk 109 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": %zu bytes of " printk 116 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": decoding %zu bytes of input\n", printk 139 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_OK\n"); printk 143 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_STREAM_END, " printk 148 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_MEMLIMIT_ERROR\n"); printk 152 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_FORMAT_ERROR\n"); printk 156 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_OPTIONS_ERROR\n"); printk 160 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_DATA_ERROR\n"); printk 164 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": XZ_BUF_ERROR\n"); printk 168 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": Bug detected!\n"); printk 195 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": module loaded\n"); printk 196 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": Create a device node with " printk 206 lib/xz/xz_dec_test.c printk(KERN_INFO DEVICE_NAME ": module unloaded\n"); printk 438 mm/internal.h printk(KERN_DEBUG "mminit::" prefix " " fmt, ##arg); \ printk 4441 mm/memory.c printk("%s%s[%lx+%lx]", prefix, kbasename(p), printk 52 mm/mm_init.c printk(KERN_DEBUG "mminit::zonelist %s %d:%s = ", printk 5095 mm/page_alloc.c printk("Node %d ", zone_to_nid(zone)); printk 5236 mm/page_alloc.c printk(KERN_CONT "(%s) ", tmp); printk 5263 mm/page_alloc.c printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n" printk 5293 mm/page_alloc.c printk("Node %d" printk 5349 mm/page_alloc.c printk(KERN_CONT printk 5391 mm/page_alloc.c printk("lowmem_reserve[]:"); printk 5393 mm/page_alloc.c printk(KERN_CONT " %ld", zone->lowmem_reserve[i]); printk 5394 mm/page_alloc.c printk(KERN_CONT "\n"); printk 5405 mm/page_alloc.c printk(KERN_CONT "%s: ", zone->name); printk 5423 mm/page_alloc.c printk(KERN_CONT "%lu*%lukB ", printk 5428 mm/page_alloc.c printk(KERN_CONT "= %lukB\n", K(total)); printk 5433 mm/page_alloc.c printk("%ld total pagecache pages\n", global_node_page_state(NR_FILE_PAGES)); printk 6202 mm/page_alloc.c printk(KERN_DEBUG " %s zone: %lu pages, LIFO batch:%u\n", printk 6575 mm/page_alloc.c printk(KERN_DEBUG "On node %d totalpages: %lu\n", pgdat->node_id, printk 6781 mm/page_alloc.c printk(KERN_DEBUG printk 6792 mm/page_alloc.c printk(KERN_DEBUG " %s zone: %lu pages reserved\n", printk 2189 mm/percpu.c printk("%spcpu-alloc: s%zu r%zu d%zu u%zu alloc=%zu*%zu", printk 2202 mm/percpu.c printk("%spcpu-alloc: ", lvl); printk 101 mm/swap_state.c printk("%lu pages in swap cache\n", total_swapcache_pages()); printk 102 mm/swap_state.c printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n", printk 105 mm/swap_state.c printk("Free swap = %ldkB\n", printk 107 mm/swap_state.c printk("Total swap = %lukB\n", total_swap_pages << (PAGE_SHIFT - 10)); printk 51 net/802/hippi.c printk("hippi_header(): length not supplied\n"); printk 102 net/802/psnap.c printk(snap_err_msg); printk 882 net/appletalk/aarp.c printk(KERN_CRIT "Unable to register AARP with SNAP.\n"); printk 701 net/appletalk/ddp.c printk(KERN_DEBUG "AppleTalk: point-to-point " printk 765 net/appletalk/ddp.c printk(KERN_WARNING "Too many routes/" printk 1330 net/appletalk/ddp.c printk(KERN_DEBUG "AppleTalk: didn't forward broadcast " printk 81 net/atm/common.c printk(KERN_DEBUG "%s: rmem leakage (%d bytes) detected.\n", printk 85 net/atm/common.c printk(KERN_DEBUG "%s: wmem leakage (%d bytes) detected.\n", printk 256 net/atm/lec.c printk(KERN_DEBUG "%s: send datalen:%ld lecid:%4.4x\n", printk 300 net/atm/lec.c printk(KERN_DEBUG "%s:sending to vpi:%d vci:%d\n", printk 589 net/atm/lec.c printk(KERN_DEBUG "%s: vcc vpi:%d vci:%d\n", printk 603 net/atm/lec.c printk(KERN_DEBUG "%s: rcv datalen:%ld lecid:%4.4x\n", printk 44 net/atm/mpc.c printk(KERN_DEBUG "mpoa:%s: " format, __func__, ##args) printk 45 net/atm/mpc.c #define dprintk_cont(format, args...) printk(KERN_CONT format, ##args) printk 49 net/atm/mpc.c printk(KERN_DEBUG "mpoa:%s: " format, __func__, ##args);\ printk 52 net/atm/mpc.c do { if (0) printk(KERN_CONT format, ##args); } while (0) printk 57 net/atm/mpc.c printk(KERN_DEBUG "mpoa:%s: " format, __func__, ##args) printk 58 net/atm/mpc.c #define ddprintk_cont(format, args...) printk(KERN_CONT format, ##args) printk 62 net/atm/mpc.c printk(KERN_DEBUG "mpoa:%s: " format, __func__, ##args);\ printk 65 net/atm/mpc.c do { if (0) printk(KERN_CONT format, ##args); } while (0) printk 17 net/atm/mpoa_caches.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args) /* debug */ printk 21 net/atm/mpoa_caches.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args);\ printk 27 net/atm/mpoa_caches.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args) /* debug */ printk 31 net/atm/mpoa_caches.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args);\ printk 27 net/atm/mpoa_proc.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args) /* debug */ printk 31 net/atm/mpoa_proc.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args);\ printk 37 net/atm/mpoa_proc.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args) /* debug */ printk 41 net/atm/mpoa_proc.c printk(KERN_DEBUG "mpoa:%s: " format, __FILE__, ##args);\ printk 237 net/atm/mpoa_proc.c printk("mpoa: proc_mpc_write: could not parse '%s'\n", page); printk 1223 net/ax25/af_ax25.c printk(KERN_WARNING "ax25_connect(): %s uses autobind, please contact jreuter@yaina.de\n", printk 1796 net/ax25/af_ax25.c printk(KERN_INFO "%s uses old SIOCAX25GETINFO\n", printk 55 net/ax25/ax25_dev.c printk(KERN_ERR "AX.25: ax25_dev_device_up - out of memory\n"); printk 88 net/ax25/ax25_ip.c printk(KERN_ERR "AX.25: ax25_hard_header - wrong protocol type 0x%2.2x\n", type); printk 146 net/ax25/ax25_out.c printk(KERN_CRIT "AX.25: ax25_output - out of memory\n"); printk 341 net/ax25/ax25_out.c printk(KERN_CRIT "AX.25: ax25_transmit_buffer - out of memory\n"); printk 452 net/ax25/ax25_route.c printk(KERN_CRIT "AX.25: ax25_dg_build_path - out of memory\n"); printk 455 net/batman-adv/network-coding.c net_ratelimited_function(printk, printk 48 net/bluetooth/smp.c #define SMP_DBG(fmt, ...) printk(KERN_DEBUG "%s: " fmt, __func__, \ printk 1178 net/bridge/br_netfilter_hooks.c printk(KERN_NOTICE "Bridge firewalling registered\n"); printk 453 net/bridge/br_private.h printk(level "%s: " format, (br)->dev->name, ##args) printk 86 net/bridge/netfilter/ebt_log.c printk(KERN_SOH "%c%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x", printk 737 net/can/bcm.c printk(KERN_ERR "can-bcm: bcm_rx_unreg: registered device " printk 1705 net/can/bcm.c printk(KERN_ERR "can: registration of bcm protocol failed\n"); printk 110 net/can/proc.c printk(KERN_ERR "can: calc_rate: count exceeded! %ld\n", printk 438 net/can/proc.c printk(KERN_INFO "can: failed to create /proc/net/can . " printk 308 net/ceph/messenger.c printk("%s: unexpected old state %d\n", __func__, old_state); printk 319 net/ceph/messenger.c printk("%s: unexpected old state %d\n", __func__, old_state); printk 330 net/ceph/messenger.c printk("%s: unexpected old state %d\n", __func__, old_state); printk 343 net/ceph/messenger.c printk("%s: unexpected old state %d\n", __func__, old_state); printk 357 net/ceph/messenger.c printk("%s: unexpected old state %d\n", __func__, old_state); printk 9990 net/core/dev.c printk("%s%s%s: %pV", printk 9993 net/core/dev.c printk("%s(NULL net_device): %pV", level, vaf); printk 260 net/core/neighbour.c printk("NEIGH: BUG, double timer add, state is %x\n", printk 743 net/core/skbuff.c printk("%sskb len=%u headroom=%u headlen=%u tailroom=%u\n" printk 762 net/core/skbuff.c printk("%sdev name=%s feat=0x%pNF\n", printk 765 net/core/skbuff.c printk("%ssk family=%hu type=%u proto=%u\n", printk 804 net/core/skbuff.c printk("skb fraglist:\n"); printk 24 net/dccp/dccp.h #define DCCP_CRIT(fmt, a...) printk(KERN_CRIT fmt " at %s:%d/%s()\n", ##a, \ printk 33 net/dccp/dccp.h printk(fmt, ##args); \ printk 643 net/decnet/af_decnet.c printk(KERN_DEBUG "DECnet: dn_destroy_sock passed socket in invalid state\n"); printk 2350 net/decnet/af_decnet.c printk(banner); printk 1394 net/decnet/dn_dev.c printk(KERN_ERR "DECnet: Area must be between 0 and 63"); printk 1399 net/decnet/dn_dev.c printk(KERN_ERR "DECnet: Node must be between 0 and 1023"); printk 90 net/decnet/dn_fib.c printk(KERN_DEBUG "DECnet: BUG! Attempt to free alive dn_fib_info\n"); printk 169 net/decnet/dn_neigh.c printk(KERN_DEBUG "dn_neigh_error_report: called\n"); printk 725 net/decnet/dn_nsp_in.c printk(KERN_DEBUG "dn_nsp_rx: Message type 0x%02x\n", (int)cb->nsp_flags); printk 513 net/decnet/dn_route.c printk(KERN_DEBUG printk 671 net/decnet/dn_route.c printk(KERN_DEBUG printk 968 net/decnet/dn_route.c printk(KERN_DEBUG printk 1044 net/decnet/dn_route.c printk(KERN_DEBUG printk 1888 net/decnet/dn_route.c printk(KERN_INFO printk 157 net/decnet/dn_table.c printk(KERN_DEBUG "DECnet: dn_rehash_zone: BUG! %d\n", printk 133 net/decnet/netfilter/dn_rtmsg.c printk(KERN_ERR "dn_rtmsg: Cannot create netlink socket"); printk 46 net/dns_resolver/internal.h printk(KERN_DEBUG "[%-6.6s] "FMT"\n", \ printk 863 net/ipv4/ipconfig.c printk("E"); printk 868 net/ipv4/ipconfig.c printk("E"); printk 24 net/ipv6/addrlabel.c #define ADDRLABEL(x...) printk(x) printk 133 net/iucv/af_iucv.c printk(KERN_WARNING "afiucv_pm_prepare\n"); printk 141 net/iucv/af_iucv.c printk(KERN_WARNING "afiucv_pm_complete\n"); printk 157 net/iucv/af_iucv.c printk(KERN_WARNING "afiucv_pm_freeze\n"); printk 193 net/iucv/af_iucv.c printk(KERN_WARNING "afiucv_pm_restore_thaw\n"); printk 2468 net/iucv/af_iucv.c printk(KERN_WARNING "iucv_if lookup failed\n"); printk 1842 net/iucv/iucv.c printk(KERN_INFO "iucv_pm_prepare\n"); printk 1852 net/iucv/iucv.c printk(KERN_INFO "iucv_pm_complete\n"); printk 1890 net/iucv/iucv.c printk(KERN_WARNING "iucv_pm_freeze\n"); printk 1925 net/iucv/iucv.c printk(KERN_WARNING "iucv_pm_thaw\n"); printk 1960 net/iucv/iucv.c printk(KERN_WARNING "iucv_pm_restore %p\n", iucv_path_table); printk 48 net/llc/af_llc.c #define dprintk(args...) printk(KERN_DEBUG args) printk 1228 net/llc/af_llc.c printk(llc_proc_err_msg); printk 1233 net/llc/af_llc.c printk(llc_sysctl_err_msg); printk 1238 net/llc/af_llc.c printk(llc_sock_err_msg); printk 1440 net/llc/llc_c_ac.c printk(KERN_WARNING "%s: timer called on closed connection\n", printk 45 net/llc/llc_c_ev.c #define dprintk(args...) printk(KERN_DEBUG args) printk 27 net/llc/llc_conn.c #define dprintk(args...) printk(KERN_DEBUG args) printk 73 net/llc/llc_conn.c printk(KERN_ERR "%s: llc_conn_service failed\n", __func__); printk 85 net/llc/llc_conn.c printk(KERN_ERR "%s: sock_queue_rcv_skb failed!\n", printk 119 net/llc/llc_conn.c printk(KERN_INFO "%s: received a reset ind!\n", __func__); printk 123 net/llc/llc_conn.c printk(KERN_INFO "%s: received unknown %d prim!\n", printk 163 net/llc/llc_conn.c printk(KERN_INFO "%s: received a reset conf!\n", __func__); printk 167 net/llc/llc_conn.c printk(KERN_INFO "%s: received unknown %d prim!\n", printk 863 net/llc/llc_conn.c printk(KERN_ERR "%s: invalid skb in backlog\n", __func__); printk 925 net/llc/llc_conn.c printk(KERN_DEBUG "LLC socket %p created in %s, now we have %d alive\n", sk, printk 966 net/llc/llc_conn.c printk(KERN_INFO "%s: unackq=%d, txq=%d\n", __func__, printk 975 net/llc/llc_conn.c printk(KERN_DEBUG "Destruction of LLC sock %p delayed in %s, cnt=%d\n", printk 977 net/llc/llc_conn.c printk(KERN_DEBUG "%d LLC sockets are still alive\n", printk 981 net/llc/llc_conn.c printk(KERN_DEBUG "LLC socket %p released in %s, %d are still alive\n", sk, printk 23 net/llc/llc_input.c #define dprintk(args...) printk(KERN_DEBUG args) printk 26 net/netfilter/nf_conntrack_h323_asn1.c #define PRINT printk printk 314 net/netfilter/nf_log.c printk("%s\n", m->buf); printk 54 net/netfilter/nfnetlink_log.c printk(x, ## args); } while (0); printk 1495 net/netlabel/netlabel_kapi.c printk(KERN_INFO "NetLabel: Initializing\n"); printk 1496 net/netlabel/netlabel_kapi.c printk(KERN_INFO "NetLabel: domain hash size = %u\n", printk 1498 net/netlabel/netlabel_kapi.c printk(KERN_INFO "NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO\n"); printk 1515 net/netlabel/netlabel_kapi.c printk(KERN_INFO "NetLabel: unlabeled traffic allowed by default\n"); printk 397 net/netlink/af_netlink.c printk(KERN_ERR "Freeing alive netlink socket %p\n", sk); printk 140 net/netrom/nr_subr.c printk(KERN_ERR "NET/ROM: nr_write_internal - invalid frame type %d\n", frametype); printk 506 net/phonet/af_phonet.c printk(KERN_ALERT printk 282 net/phonet/pep-gprs.c printk(KERN_DEBUG"%s: attached\n", dev->name); printk 303 net/phonet/pep-gprs.c printk(KERN_DEBUG"%s: detached\n", dev->name); printk 91 net/rds/ib_cm.c printk(KERN_NOTICE "ib_modify_qp(IB_QP_MIN_RNR_TIMER): err=%d\n", -ret); printk 176 net/rds/ib_cm.c printk(KERN_NOTICE "ib_modify_qp(IB_QP_STATE, RTS): err=%d\n", err); printk 181 net/rds/ib_cm.c printk(KERN_ERR "rds_ib_update_ipaddr failed (%d)\n", printk 652 net/rds/ib_cm.c printk(KERN_NOTICE "RDS incoming connection has no private data, " printk 401 net/rds/ib_recv.c printk(KERN_NOTICE "Argh - ring alloc returned pos=%u\n", printk 729 net/rds/ib_send.c printk(KERN_WARNING "RDS/IB: ib_post_send to %pI6c " printk 823 net/rds/ib_send.c printk(KERN_WARNING "RDS/IB: atomic ib_post_send to %pI6c " printk 831 net/rds/ib_send.c printk(KERN_WARNING "RDS/IB: atomic ib_post_send() rc=%d, but failed_wqe updated!\n", ret); printk 964 net/rds/ib_send.c printk(KERN_WARNING "RDS/IB: rdma ib_post_send to %pI6c " printk 972 net/rds/ib_send.c printk(KERN_WARNING "RDS/IB: ib_post_send() rc=%d, but failed_wqe updated!\n", ret); printk 165 net/rds/rdma_transport.c printk(KERN_ERR "RDS: unknown event %u (%s)!\n", printk 205 net/rds/rdma_transport.c printk(KERN_ERR "RDS/RDMA: failed to setup listener, " printk 216 net/rds/rdma_transport.c printk(KERN_ERR "RDS/RDMA: failed to setup listener, " printk 223 net/rds/rdma_transport.c printk(KERN_ERR "RDS/RDMA: failed to setup listener, " printk 77 net/rds/threads.c printk(KERN_WARNING "%s: Cannot transition to state UP, " printk 51 net/rds/transport.c printk(KERN_ERR "RDS Transport type %d already registered\n", printk 55 net/rds/transport.c printk(KERN_INFO "Registered RDS/%s transport\n", trans->t_name); printk 67 net/rds/transport.c printk(KERN_INFO "Unregistered RDS/%s transport\n", trans->t_name); printk 1274 net/rfkill/core.c printk(KERN_DEBUG "rfkill: input handler enabled\n"); printk 1298 net/rfkill/core.c printk(KERN_DEBUG "rfkill: input handler disabled\n"); printk 1478 net/rose/af_rose.c printk(KERN_ERR "ROSE: rose_proto_init - rose_ndevs parameter to large\n"); printk 1492 net/rose/af_rose.c printk(KERN_ERR "ROSE: rose_proto_init - unable to allocate device structure\n"); printk 1504 net/rose/af_rose.c printk(KERN_ERR "ROSE: rose_proto_init - unable to allocate memory\n"); printk 1510 net/rose/af_rose.c printk(KERN_ERR "ROSE: netdevice registration failed\n"); printk 103 net/rose/rose_dev.c printk(KERN_ERR "ROSE: rose_xmit - called when iface is down\n"); printk 200 net/rose/rose_in.c printk(KERN_WARNING "ROSE: unknown %02X in state 3\n", frametype); printk 162 net/rose/rose_link.c printk(KERN_WARNING "ROSE: received unknown %02X with LCI 000\n", frametype); printk 894 net/rose/rose_route.c printk("rose_route : unknown neighbour or device %s\n", printk 193 net/rose/rose_subr.c printk(KERN_ERR "ROSE: rose_write_internal - invalid frametype %02X\n", frametype); printk 419 net/rose/rose_subr.c printk(KERN_DEBUG "ROSE: rose_parse_facilities - unknown facilities family %02X\n", *p); printk 828 net/rxrpc/af_rxrpc.c printk("Attempt to release alive rxrpc socket: %p\n", sk); printk 1187 net/rxrpc/ar-internal.h printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__) printk 691 net/sched/sch_gred.c printk(KERN_DEBUG "GRED: DP %u does not have a prio " printk 784 net/sunrpc/auth_gss/auth_gss.c printk(KERN_CRIT "%s: bad return from " printk 217 net/sunrpc/auth_gss/gss_krb5_mech.c printk(KERN_WARNING "gss_kerberos_mech: unsupported " printk 228 net/sunrpc/auth_gss/gss_krb5_mech.c printk(KERN_WARNING "gss_kerberos_mech: unable to initialize " printk 234 net/sunrpc/auth_gss/gss_krb5_mech.c printk(KERN_WARNING "gss_kerberos_mech: error setting key for " printk 759 net/sunrpc/auth_gss/gss_krb5_mech.c printk("Failed to register kerberos gss mechanism!\n"); printk 93 net/sunrpc/backchannel_rqst.c printk(KERN_ERR "Failed to create bc receive xbuf\n"); printk 100 net/sunrpc/backchannel_rqst.c printk(KERN_ERR "Failed to create bc snd xbuf\n"); printk 159 net/sunrpc/backchannel_rqst.c printk(KERN_ERR "Failed to create bc rpc_rqst\n"); printk 142 net/sunrpc/clnt.c printk(KERN_INFO "RPC: Couldn't create pipefs entry" printk 201 net/sunrpc/clnt.c printk(KERN_ERR "%s: unknown event: %ld\n", __func__, event); printk 1679 net/sunrpc/clnt.c printk(KERN_ERR "%s: status=%d, but no request slot, exiting\n", printk 1690 net/sunrpc/clnt.c printk(KERN_ERR "%s: status=%d, request allocated anyway\n", printk 1705 net/sunrpc/clnt.c printk(KERN_ERR "%s: unrecognized error %d, exiting\n", printk 2327 net/sunrpc/clnt.c printk(KERN_NOTICE "RPC: Could not send backchannel reply " printk 2337 net/sunrpc/clnt.c printk(KERN_NOTICE "RPC: Could not send backchannel reply " printk 2400 net/sunrpc/clnt.c printk("%s: RPC call returned error %d\n", printk 3024 net/sunrpc/clnt.c printk(KERN_INFO "-pid- flgs status -client- --rqstp- " printk 3036 net/sunrpc/clnt.c printk(KERN_INFO "%5u %04x %6d %8p %8p %8ld %8p %sv%u %s a:%ps q:%s\n", printk 506 net/sunrpc/rpc_pipe.c printk(KERN_WARNING "%s: %s failed to allocate inode for dentry %pd\n", printk 730 net/sunrpc/rpc_pipe.c printk(KERN_WARNING "%s: %s failed to populate directory %pd\n", printk 827 net/sunrpc/rpc_pipe.c printk(KERN_WARNING "%s: %s() failed to create pipe %pd/%s (errno = %d)\n", printk 511 net/sunrpc/sched.c printk(KERN_ERR "RPC: Inactive task (%p) being woken up!\n", task); printk 539 net/sunrpc/svc.c printk("svc_destroy: no threads for serv=%p!\n", serv); printk 1077 net/sunrpc/svc.c printk(KERN_WARNING "svc: failed to register " printk 522 net/sunrpc/svc_xprt.c printk(KERN_ERR "RPC request reserved %d but used %d\n", printk 831 net/sunrpc/svc_xprt.c printk(KERN_ERR printk 745 net/sunrpc/svcsock.c printk("svc: socket %p: no user data\n", sk); printk 760 net/sunrpc/svcsock.c printk("svc: socket %p: no user data\n", sk); printk 795 net/sunrpc/svcsock.c printk(KERN_WARNING "%s: no more sockets!\n", printk 995 net/sunrpc/svcsock.c printk(KERN_NOTICE printk 1126 net/sunrpc/svcsock.c printk(KERN_NOTICE "%s: recvfrom returned errno %d\n", printk 1153 net/sunrpc/svcsock.c printk(KERN_NOTICE printk 1414 net/sunrpc/svcsock.c printk(KERN_WARNING "svc: only UDP and TCP " printk 112 net/sunrpc/xprt.c printk(KERN_INFO "RPC: Registered %s transport module.\n", printk 139 net/sunrpc/xprt.c printk(KERN_INFO printk 650 net/sunrpc/xprt.c printk(KERN_WARNING "xprt_adjust_timeout: rq_timeout = 0!\n"); printk 562 net/sunrpc/xprtsock.c printk(KERN_WARNING "Callback slot table overflowed\n"); printk 2015 net/sunrpc/xprtsock.c printk(KERN_ERR "%s: unhandled error (%d) connecting to %s\n", printk 2385 net/sunrpc/xprtsock.c printk("%s: connect returned unhandled error %d\n", printk 130 net/wireless/lib80211.c printk(KERN_DEBUG "%s: entries remaining in delayed crypt " printk 181 net/wireless/lib80211.c printk(KERN_DEBUG "lib80211_crypt: registered algorithm '%s'\n", printk 202 net/wireless/lib80211.c printk(KERN_DEBUG "lib80211_crypt: unregistered algorithm '%s'\n", printk 548 net/wireless/lib80211_crypt_tkip.c printk(KERN_DEBUG "Invalid packet for Michael MIC add " printk 600 net/wireless/lib80211_crypt_tkip.c printk(KERN_DEBUG "%s: Michael MIC verification failed for " printk 2903 net/xfrm/xfrm_user.c printk(KERN_NOTICE "xfrm_user: Unknown SA event %d\n", printk 3207 net/xfrm/xfrm_user.c printk(KERN_NOTICE "xfrm_user: Unknown Policy event %d\n", printk 3366 net/xfrm/xfrm_user.c printk(KERN_INFO "Initializing XFRM netlink socket\n"); printk 47 samples/bpf/test_lwt_bpf.c printk("len %d hash %d protocol %d\n", skb->len, skb->hash, printk 49 samples/bpf/test_lwt_bpf.c printk("cb %d ingress_ifindex %d ifindex %d\n", skb->cb[0], printk 59 samples/bpf/test_lwt_bpf.c printk("cb0: %x cb1: %x cb2: %x\n", skb->cb[0], skb->cb[1], printk 61 samples/bpf/test_lwt_bpf.c printk("cb3: %x cb4: %x\n", skb->cb[3], skb->cb[4]); printk 75 samples/bpf/test_lwt_bpf.c printk("packet truncated\n"); printk 79 samples/bpf/test_lwt_bpf.c printk("src: %x dst: %x\n", iph->saddr, iph->daddr); printk 100 samples/bpf/test_lwt_bpf.c printk("bpf_l4_csum_replace failed: %d\n", ret); printk 123 samples/bpf/test_lwt_bpf.c printk("bpf_l4_csum_replace failed: %d\n"); printk 130 samples/bpf/test_lwt_bpf.c printk("bpf_l3_csum_replace failed: %d\n", ret); printk 140 samples/bpf/test_lwt_bpf.c printk("bpf_skb_store_bytes() failed: %d\n", ret); printk 156 samples/bpf/test_lwt_bpf.c printk("bpf_skb_load_bytes failed: %d\n", ret); printk 161 samples/bpf/test_lwt_bpf.c printk("out: rewriting from %x to %x\n", old_ip, new_ip); printk 176 samples/bpf/test_lwt_bpf.c printk("skb_change_head() failed: %d\n", ret); printk 185 samples/bpf/test_lwt_bpf.c printk("skb_store_bytes() failed: %d\n", ret); printk 205 samples/bpf/test_lwt_bpf.c printk("redirected to %d\n", ifindex); printk 232 samples/bpf/test_lwt_bpf.c printk("Set initial 96 bytes of header to FF\n"); printk 241 samples/bpf/test_lwt_bpf.c printk("redirected to %d\n", ifindex); printk 249 samples/bpf/test_lwt_bpf.c printk("dropping with: %d\n", BPF_DROP); printk 364 samples/configfs/configfs_sample.c printk(KERN_ERR "Error %d while registering subsystem %s\n", printk 35 samples/hw_breakpoint/data_breakpoint.c printk(KERN_INFO "%s value is changed\n", ksym_name); printk 37 samples/hw_breakpoint/data_breakpoint.c printk(KERN_INFO "Dump stack from sample_hbp_handler\n"); printk 56 samples/hw_breakpoint/data_breakpoint.c printk(KERN_INFO "HW Breakpoint for %s write installed\n", ksym_name); printk 61 samples/hw_breakpoint/data_breakpoint.c printk(KERN_INFO "Breakpoint registration failed\n"); printk 69 samples/hw_breakpoint/data_breakpoint.c printk(KERN_INFO "HW Breakpoint for %s write uninstalled\n", ksym_name); printk 58 samples/kfifo/bytestream-example.c printk(KERN_INFO "byte stream fifo test start\n"); printk 68 samples/kfifo/bytestream-example.c printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test)); printk 72 samples/kfifo/bytestream-example.c printk(KERN_INFO "buf: %.*s\n", i, buf); printk 76 samples/kfifo/bytestream-example.c printk(KERN_INFO "ret: %d\n", ret); printk 79 samples/kfifo/bytestream-example.c printk(KERN_INFO "ret: %d\n", ret); printk 82 samples/kfifo/bytestream-example.c printk(KERN_INFO "skip 1st element\n"); printk 89 samples/kfifo/bytestream-example.c printk(KERN_INFO "queue len: %u\n", kfifo_len(&test)); printk 93 samples/kfifo/bytestream-example.c printk(KERN_INFO "%d\n", i); printk 98 samples/kfifo/bytestream-example.c printk(KERN_INFO "item = %d\n", i); printk 100 samples/kfifo/bytestream-example.c printk(KERN_WARNING "value mismatch: test failed\n"); printk 105 samples/kfifo/bytestream-example.c printk(KERN_WARNING "size mismatch: test failed\n"); printk 108 samples/kfifo/bytestream-example.c printk(KERN_INFO "test passed\n"); printk 159 samples/kfifo/bytestream-example.c printk(KERN_ERR "error kfifo_alloc\n"); printk 28 samples/kfifo/dma-example.c printk(KERN_INFO "DMA fifo test start\n"); printk 31 samples/kfifo/dma-example.c printk(KERN_WARNING "error kfifo_alloc\n"); printk 35 samples/kfifo/dma-example.c printk(KERN_INFO "queue size: %u\n", kfifo_size(&fifo)); printk 45 samples/kfifo/dma-example.c printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo)); printk 64 samples/kfifo/dma-example.c printk(KERN_INFO "DMA sgl entries: %d\n", nents); printk 67 samples/kfifo/dma-example.c printk(KERN_WARNING "error kfifo_dma_in_prepare\n"); printk 72 samples/kfifo/dma-example.c printk(KERN_INFO "scatterlist for receive:\n"); printk 74 samples/kfifo/dma-example.c printk(KERN_INFO printk 94 samples/kfifo/dma-example.c printk(KERN_INFO "DMA sgl entries: %d\n", nents); printk 97 samples/kfifo/dma-example.c printk(KERN_WARNING "error kfifo_dma_out_prepare\n"); printk 101 samples/kfifo/dma-example.c printk(KERN_INFO "scatterlist for transmit:\n"); printk 103 samples/kfifo/dma-example.c printk(KERN_INFO printk 122 samples/kfifo/dma-example.c printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo)); printk 125 samples/kfifo/dma-example.c printk(KERN_WARNING "size mismatch: test failed"); printk 128 samples/kfifo/dma-example.c printk(KERN_INFO "test passed\n"); printk 58 samples/kfifo/inttype-example.c printk(KERN_INFO "int fifo test start\n"); printk 65 samples/kfifo/inttype-example.c printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test)); printk 69 samples/kfifo/inttype-example.c printk(KERN_INFO "ret: %d\n", ret); printk 72 samples/kfifo/inttype-example.c printk(KERN_INFO "ret: %d\n", ret); printk 75 samples/kfifo/inttype-example.c printk(KERN_INFO "skip 1st element\n"); printk 82 samples/kfifo/inttype-example.c printk(KERN_INFO "queue len: %u\n", kfifo_len(&test)); printk 86 samples/kfifo/inttype-example.c printk(KERN_INFO "%d\n", i); printk 91 samples/kfifo/inttype-example.c printk(KERN_INFO "item = %d\n", i); printk 93 samples/kfifo/inttype-example.c printk(KERN_WARNING "value mismatch: test failed\n"); printk 98 samples/kfifo/inttype-example.c printk(KERN_WARNING "size mismatch: test failed\n"); printk 101 samples/kfifo/inttype-example.c printk(KERN_INFO "test passed\n"); printk 152 samples/kfifo/inttype-example.c printk(KERN_ERR "error kfifo_alloc\n"); printk 76 samples/kfifo/record-example.c printk(KERN_INFO "record fifo test start\n"); printk 81 samples/kfifo/record-example.c printk(KERN_INFO "fifo peek len: %u\n", kfifo_peek_len(&test)); printk 90 samples/kfifo/record-example.c printk(KERN_INFO "skip 1st element\n"); printk 93 samples/kfifo/record-example.c printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test)); printk 98 samples/kfifo/record-example.c printk(KERN_INFO "%.*s\n", ret, buf); printk 105 samples/kfifo/record-example.c printk(KERN_INFO "item = %.*s\n", ret, buf); printk 107 samples/kfifo/record-example.c printk(KERN_WARNING "value mismatch: test failed\n"); printk 112 samples/kfifo/record-example.c printk(KERN_WARNING "size mismatch: test failed\n"); printk 115 samples/kfifo/record-example.c printk(KERN_INFO "test passed\n"); printk 166 samples/kfifo/record-example.c printk(KERN_ERR "error kfifo_alloc\n"); printk 132 security/apparmor/lib.c printk(KERN_INFO "AppArmor: %s\n", str); printk 43 security/commoncap.c printk(KERN_INFO "warning: `%s' has both setuid-root and" printk 674 security/commoncap.c printk(KERN_NOTICE "Invalid argument reading file caps for %s\n", printk 26 security/keys/internal.h printk(KERN_DEBUG "==> %s("FMT")\n", __func__, ##__VA_ARGS__) printk 28 security/keys/internal.h printk(KERN_DEBUG "<== %s()"FMT"\n", __func__, ##__VA_ARGS__) printk 30 security/keys/internal.h printk(KERN_DEBUG " "FMT"\n", ##__VA_ARGS__) printk 40 security/keys/key.c printk("__key_check: key %p {%08x} should be {%08x}\n", printk 2718 security/smack/smack_lsm.c printk(KERN_WARNING printk 96 security/smack/smack_netfilter.c printk(KERN_DEBUG "Smack: Registering netfilter hooks\n"); printk 693 security/smack/smackfs.c printk(KERN_WARNING "%s:%d remove rc = %d\n", printk 708 security/smack/smackfs.c printk(KERN_WARNING "%s:%d cipso add rc = %d\n", printk 715 security/smack/smackfs.c printk(KERN_WARNING "%s:%d map add rc = %d\n", printk 736 security/smack/smackfs.c printk(KERN_WARNING "%s:%d remove rc = %d\n", printk 745 security/smack/smackfs.c printk(KERN_WARNING "%s:%d add rc = %d\n", printk 2897 security/smack/smackfs.c printk(KERN_ERR "%s failed %d while creating inodes\n", printk 2972 security/smack/smackfs.c printk(KERN_ERR "smackfs: sysfs mountpoint problem.\n"); printk 2978 security/smack/smackfs.c printk(KERN_ERR "smackfs: could not mount!\n"); printk 391 security/tomoyo/condition.c #define dprintk printk printk 869 sound/aoa/codecs/onyx.c printk(KERN_ERR PFX "gpios not assigned!!\n"); printk 881 sound/aoa/codecs/onyx.c printk(KERN_ERR PFX "failed to initialise onyx registers\n"); printk 886 sound/aoa/codecs/onyx.c printk(KERN_ERR PFX "failed to create onyx snd device!\n"); printk 921 sound/aoa/codecs/onyx.c printk(KERN_ERR PFX "error creating onyx pcm\n"); printk 973 sound/aoa/codecs/onyx.c printk(KERN_INFO PFX "attached to onyx codec via i2c\n"); printk 987 sound/aoa/codecs/onyx.c printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n"); printk 1012 sound/aoa/codecs/onyx.c printk(KERN_ERR PFX "failed to read control register\n"); printk 1025 sound/aoa/codecs/onyx.c printk(KERN_DEBUG PFX "created and attached onyx instance\n"); printk 802 sound/aoa/codecs/tas.c printk(KERN_ERR PFX "gpios not assigned!!\n"); printk 808 sound/aoa/codecs/tas.c printk(KERN_ERR PFX "tas failed to initialise\n"); printk 818 sound/aoa/codecs/tas.c printk(KERN_ERR PFX "error attaching tas to soundbus\n"); printk 823 sound/aoa/codecs/tas.c printk(KERN_ERR PFX "failed to create tas snd device!\n"); printk 906 sound/aoa/codecs/tas.c printk(KERN_DEBUG printk 94 sound/aoa/codecs/toonie.c printk(KERN_ERR PFX "failed to create toonie snd device!\n"); printk 101 sound/aoa/codecs/toonie.c printk(KERN_ERR PFX "error creating toonie pcm\n"); printk 114 sound/aoa/codecs/toonie.c printk(KERN_ERR PFX "toonie_exit_codec called without soundbus_dev!\n"); printk 37 sound/aoa/core/alsa.c printk(KERN_ERR "snd-aoa: couldn't register alsa card\n"); printk 71 sound/aoa/core/alsa.c printk(KERN_ERR "snd-aoa: failed to create snd device (%d)\n", err); printk 76 sound/aoa/core/alsa.c printk(KERN_ERR "snd-aoa: failed to register " printk 78 sound/aoa/core/alsa.c printk(KERN_ERR "snd-aoa: have you forgotten the " printk 94 sound/aoa/core/alsa.c printk(KERN_ERR "snd-aoa: failed to add alsa control (%d)\n", printk 35 sound/aoa/core/core.c printk(KERN_ERR "snd-aoa: fabric didn't like codec %s\n", printk 45 sound/aoa/core/core.c printk(KERN_ERR "snd-aoa: codec %s didn't init\n", c->name); printk 136 sound/aoa/core/core.c printk(KERN_ERR "snd-aoa: fabric unassigned " printk 22 sound/aoa/core/gpio-pmf.c printk(KERN_WARNING "pmf_gpio_set_" #name \ printk 45 sound/aoa/core/gpio-pmf.c printk(KERN_WARNING "pmf_gpio_set_hw_reset" printk 192 sound/aoa/core/gpio-pmf.c printk(KERN_ERR "snd-aoa: gpio layer failed to" printk 782 sound/aoa/fabrics/layout.c printk(KERN_INFO "snd-aoa-fabric-layout: " printk 787 sound/aoa/fabrics/layout.c printk(KERN_INFO "snd-aoa-fabric-layout: " printk 793 sound/aoa/fabrics/layout.c printk(KERN_INFO "snd-aoa-fabric-layout: " printk 805 sound/aoa/fabrics/layout.c printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n"); printk 1026 sound/aoa/fabrics/layout.c printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n"); printk 1045 sound/aoa/fabrics/layout.c printk(KERN_DEBUG printk 1050 sound/aoa/fabrics/layout.c printk(KERN_DEBUG printk 1073 sound/aoa/fabrics/layout.c printk(KERN_INFO "snd-aoa-fabric-layout: can't use," printk 148 sound/aoa/soundbus/core.c printk(KERN_ERR "soundbus: adding device failed sanity check!\n"); printk 126 sound/aoa/soundbus/i2sbus/control.c printk(KERN_ERR "i2sbus: INVALID CELL ENABLE VALUE\n"); printk 169 sound/aoa/soundbus/i2sbus/control.c printk(KERN_ERR "i2sbus: INVALID CLOCK ENABLE VALUE\n"); printk 265 sound/aoa/soundbus/i2sbus/core.c printk(KERN_ERR "i2sbus: failed to claim resource %d!\n", i); printk 299 sound/aoa/soundbus/i2sbus/core.c printk(KERN_ERR "i2sbus: control layer didn't like bus\n"); printk 304 sound/aoa/soundbus/i2sbus/core.c printk(KERN_DEBUG "i2sbus: device registration error!\n"); printk 340 sound/aoa/soundbus/i2sbus/core.c printk(KERN_ERR "i2sbus_control_init API breakage\n"); printk 270 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR "i2sbus_wait_for_stop: timed out\n"); printk 683 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR "i2sbus: timed out " printk 870 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR "i2sbus: a codec didn't unregister!\n"); printk 889 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR "i2sbus: pcm name and id must be set!\n"); printk 912 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG printk 917 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG printk 934 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG "i2sbus: failed to allocate cii\n"); printk 944 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG printk 951 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG "i2sbus: failed to get module reference!\n"); printk 957 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG printk 967 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_DEBUG "i2sbus: failed to create pcm\n"); printk 979 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR printk 996 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR printk 1019 sound/aoa/soundbus/i2sbus/pcm.c printk(KERN_ERR "i2sbus: error registering new pcm\n"); printk 1045 sound/arm/aaci.c printk(KERN_WARNING "AACI: FIFO depth %d not supported\n", printk 71 sound/arm/pxa2xx-ac97-lib.c printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n", printk 108 sound/arm/pxa2xx-ac97-lib.c printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n", printk 221 sound/arm/pxa2xx-ac97-lib.c printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", printk 258 sound/arm/pxa2xx-ac97-lib.c printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", printk 86 sound/core/misc.c printk(verbose_fmt, sanity_file_name(path), line, &vaf); printk 163 sound/core/oss/pcm_plugin.h #define pdprintf(fmt, args...) printk(KERN_DEBUG "plugin: " fmt, ##args) printk 1251 sound/drivers/aloop.c printk(KERN_ERR "aloop: No loopback enabled\n"); printk 1049 sound/drivers/dummy.c printk(KERN_INFO printk 1193 sound/drivers/dummy.c printk(KERN_ERR "Dummy soundcard not found or device busy\n"); printk 78 sound/drivers/mpu401/mpu401.c printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]); printk 258 sound/drivers/mpu401/mpu401.c printk(KERN_ERR "MPU-401 device not found or device busy\n"); printk 720 sound/drivers/mtpav.c printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port); printk 365 sound/drivers/opl3/opl3_lib.c printk(KERN_ERR "snd_opl3_init: command not defined!\n"); printk 114 sound/drivers/opl3/opl3_midi.c printk(KERN_DEBUG "time %.5i: %s [%.2i]: ", opl3->use_time, s, voice); printk 116 sound/drivers/opl3/opl3_midi.c printk(KERN_CONT "%c", *(str + opl3->voices[i].state + 1)); printk 117 sound/drivers/opl3/opl3_midi.c printk(KERN_CONT "\n"); printk 207 sound/drivers/opl3/opl3_midi.c printk(KERN_DEBUG "%s %iop allocation on voice %i\n", printk 52 sound/drivers/pcsp/pcsp.c printk(KERN_ERR "PCSP: Timer resolution is not sufficient " printk 54 sound/drivers/pcsp/pcsp.c printk(KERN_ERR "PCSP: Make sure you have HPET and ACPI " printk 56 sound/drivers/pcsp/pcsp.c printk(KERN_ERR "PCSP: Turned into nopcm mode.\n"); printk 66 sound/drivers/pcsp/pcsp.c printk(KERN_DEBUG "PCSP: lpj=%li, min_div=%i, res=%u\n", printk 146 sound/drivers/pcsp/pcsp.c printk(KERN_ERR "PC-Speaker initialization failed.\n"); printk 152 sound/drivers/pcsp/pcsp.c printk(KERN_WARNING "PCSP: CONFIG_DEBUG_PAGEALLOC is enabled, " printk 108 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: buffer_bytes mod period_bytes != 0 ? " printk 141 sound/drivers/pcsp/pcsp_lib.c printk(KERN_WARNING "PCSP: unexpected stop\n"); printk 156 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: start_playing called\n"); printk 159 sound/drivers/pcsp/pcsp_lib.c printk(KERN_ERR "PCSP: Timer already active\n"); printk 177 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: stop_playing called\n"); printk 206 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: close called\n"); printk 230 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: hw_free called\n"); printk 246 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: prepare called, " printk 262 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: trigger called\n"); printk 316 sound/drivers/pcsp/pcsp_lib.c printk(KERN_INFO "PCSP: open called\n"); printk 319 sound/drivers/pcsp/pcsp_lib.c printk(KERN_ERR "PCSP: still active!!\n"); printk 76 sound/drivers/pcsp/pcsp_mixer.c printk(KERN_INFO "PCSP: rate set to %li\n", PCSP_RATE()); printk 797 sound/drivers/serial-u16550.c printk(KERN_ERR "no UART detected at 0x%lx\n", iobase); printk 1017 sound/drivers/serial-u16550.c printk(KERN_ERR "serial midi soundcard not found or device busy\n"); printk 171 sound/drivers/virmidi.c printk(KERN_ERR "Card-VirMIDI soundcard not found or device busy\n"); printk 241 sound/drivers/vx/vx_core.c printk(KERN_DEBUG "rmh: cmd = 0x%06x, length = %d, stype = %d\n", printk 244 sound/drivers/vx/vx_core.c printk(KERN_DEBUG " "); printk 246 sound/drivers/vx/vx_core.c printk(KERN_CONT "0x%06x ", rmh->Cmd[i]); printk 247 sound/drivers/vx/vx_core.c printk(KERN_CONT "\n"); printk 363 sound/drivers/vx/vx_core.c printk(KERN_DEBUG "send_rih: cmd = 0x%x\n", cmd); printk 498 sound/drivers/vx/vx_core.c printk(KERN_ERR "DSP Stream underrun ! IRQ events = 0x%x\n", events); printk 681 sound/drivers/vx/vx_core.c printk(KERN_ERR printk 285 sound/i2c/cs8427.c printk(KERN_DEBUG "reg[0x%x] = 0x%x\n", xx+1, buf[xx]); printk 46 sound/i2c/other/ak4114.c printk(KERN_DEBUG "AK4114 REG DUMP:\n"); printk 48 sound/i2c/other/ak4114.c printk(KERN_DEBUG "reg[%02x] = %02x (%02x)\n", i, reg_read(ak4114, i), i < ARRAY_SIZE(ak4114->regmap) ? ak4114->regmap[i] : 0); printk 42 sound/i2c/other/ak4117.c printk(KERN_DEBUG "AK4117 REG DUMP:\n"); printk 44 sound/i2c/other/ak4117.c printk(KERN_DEBUG "reg[%02x] = %02x (%02x)\n", i, reg_read(ak4117, i), i < sizeof(ak4117->regmap) ? ak4117->regmap[i] : 0); printk 60 sound/i2c/tea6330t.c printk(KERN_DEBUG "set - 0x%x/0x%x\n", addr, value); printk 97 sound/isa/ad1816a/ad1816a.c printk(KERN_ERR PFX "AUDIO PnP configure failure\n"); printk 116 sound/isa/ad1816a/ad1816a.c printk(KERN_ERR PFX "MPU401 PnP configure failure\n"); printk 182 sound/isa/ad1816a/ad1816a.c printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]); printk 189 sound/isa/ad1816a/ad1816a.c printk(KERN_ERR PFX "no OPL device at 0x%lx-0x%lx.\n", fm_port[dev], fm_port[dev] + 2); printk 278 sound/isa/ad1816a/ad1816a.c printk(KERN_ERR "no AD1816A based soundcards found.\n"); printk 587 sound/isa/cmi8330.c printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", printk 242 sound/isa/cs423x/cs4236.c printk(KERN_ERR IDENT " WSS PnP configure failed for WSS (out of resources?)\n"); printk 263 sound/isa/cs423x/cs4236.c printk(KERN_ERR IDENT " CTRL PnP configure failed for WSS (out of resources?)\n"); printk 275 sound/isa/cs423x/cs4236.c printk(KERN_ERR IDENT " MPU401 PnP configure failed for WSS (out of resources?)\n"); printk 378 sound/isa/cs423x/cs4236.c printk(KERN_ERR IDENT ": unable to register SB port at 0x%lx\n", sb_port[dev]); printk 428 sound/isa/cs423x/cs4236.c printk(KERN_WARNING IDENT ": OPL3 not detected\n"); printk 441 sound/isa/cs423x/cs4236.c printk(KERN_WARNING IDENT ": MPU401 not detected\n"); printk 572 sound/isa/cs423x/cs4236.c printk(KERN_ERR "PnP BIOS detection failed for " IDENT "\n"); printk 631 sound/isa/cs423x/cs4236.c printk(KERN_ERR "isapnp detection failed and probing for " IDENT printk 939 sound/isa/cs423x/cs4236_lib.c printk(KERN_DEBUG "get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, " printk 977 sound/isa/cs423x/cs4236_lib.c printk(KERN_DEBUG "set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, " printk 34 sound/isa/es1688/es1688_lib.c printk(KERN_DEBUG "snd_es1688_dsp_command: timeout (0x%x)\n", val); printk 335 sound/isa/es1688/es1688_lib.c printk(KERN_DEBUG "trigger: val = 0x%x, value = 0x%x\n", val, value); printk 336 sound/isa/es1688/es1688_lib.c printk(KERN_DEBUG "trigger: pointer = 0x%x\n", printk 436 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 voice ctrl, ramp ctrl = 0x%x, 0x%x\n", voice, ctrl = snd_gf1_i_read8(gus, 0), snd_gf1_i_read8(gus, 0x0d)); printk 437 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 frequency = 0x%x\n", voice, snd_gf1_i_read16(gus, 1)); printk 438 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 loop start, end = 0x%x (0x%x), 0x%x (0x%x)\n", voice, snd_gf1_i_read_addr(gus, 2, ctrl & 4), snd_gf1_i_read_addr(gus, 2, (ctrl & 4) ^ 4), snd_gf1_i_read_addr(gus, 4, ctrl & 4), snd_gf1_i_read_addr(gus, 4, (ctrl & 4) ^ 4)); printk 439 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 ramp start, end, rate = 0x%x, 0x%x, 0x%x\n", voice, snd_gf1_i_read8(gus, 7), snd_gf1_i_read8(gus, 8), snd_gf1_i_read8(gus, 6)); printk 440 sound/isa/gus/gus_io.c printk(KERN_INFO" -%i- GF1 volume = 0x%x\n", voice, snd_gf1_i_read16(gus, 9)); printk 441 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 position = 0x%x (0x%x)\n", voice, snd_gf1_i_read_addr(gus, 0x0a, ctrl & 4), snd_gf1_i_read_addr(gus, 0x0a, (ctrl & 4) ^ 4)); printk 444 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 mode = 0x%x\n", voice, mode); printk 446 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 effect address = 0x%x\n", voice, snd_gf1_i_read_addr(gus, 0x11, ctrl & 4)); printk 447 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 effect volume = 0x%x\n", voice, snd_gf1_i_read16(gus, 0x16)); printk 448 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 effect volume final = 0x%x\n", voice, snd_gf1_i_read16(gus, 0x1d)); printk 449 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 effect accumulator = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x14)); printk 452 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 left offset = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x13), snd_gf1_i_read16(gus, 0x13) >> 4); printk 453 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 left offset final = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x1c), snd_gf1_i_read16(gus, 0x1c) >> 4); printk 454 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 right offset = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x0c), snd_gf1_i_read16(gus, 0x0c) >> 4); printk 455 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GFA1 right offset final = 0x%x (%i)\n", voice, snd_gf1_i_read16(gus, 0x1b), snd_gf1_i_read16(gus, 0x1b) >> 4); printk 457 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 pan = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x0c)); printk 459 sound/isa/gus/gus_io.c printk(KERN_INFO " -%i- GF1 pan = 0x%x\n", voice, snd_gf1_i_read8(gus, 0x0c)); printk 468 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 active voices = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_ACTIVE_VOICES)); printk 471 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 global mode = 0x%x\n", global_mode); printk 474 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 LFO base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_LFO_BASE)); printk 475 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 voices IRQ read = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_VOICES_IRQ_READ)); printk 476 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 DRAM DMA control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_CONTROL)); printk 477 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 DRAM DMA high/low = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_DMA_HIGH), snd_gf1_i_read16(gus, SNDRV_GF1_GW_DRAM_DMA_LOW)); printk 478 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 DRAM IO high/low = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DRAM_IO_HIGH), snd_gf1_i_read16(gus, SNDRV_GF1_GW_DRAM_IO_LOW)); printk 480 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 record DMA control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_REC_DMA_CONTROL)); printk 481 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GF1 DRAM IO 16 = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_DRAM_IO16)); printk 483 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GFA1 memory config = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_MEMORY_CONFIG)); printk 484 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GFA1 memory control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_MEMORY_CONTROL)); printk 485 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GFA1 FIFO record base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_FIFO_RECORD_BASE_ADDR)); printk 486 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GFA1 FIFO playback base = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_FIFO_PLAY_BASE_ADDR)); printk 487 sound/isa/gus/gus_io.c printk(KERN_INFO " -G- GFA1 interleave control = 0x%x\n", snd_gf1_i_look16(gus, SNDRV_GF1_GW_INTERLEAVE)); printk 493 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- mix control = 0x%x\n", inb(GUSP(gus, MIXCNTRLREG))); printk 494 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- IRQ status = 0x%x\n", inb(GUSP(gus, IRQSTAT))); printk 495 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- timer control = 0x%x\n", inb(GUSP(gus, TIMERCNTRL))); printk 496 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- timer data = 0x%x\n", inb(GUSP(gus, TIMERDATA))); printk 497 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- status read = 0x%x\n", inb(GUSP(gus, REGCNTRLS))); printk 498 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- Sound Blaster control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_SOUND_BLASTER_CONTROL)); printk 499 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- AdLib timer 1/2 = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_ADLIB_TIMER_1), snd_gf1_i_look8(gus, SNDRV_GF1_GB_ADLIB_TIMER_2)); printk 500 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- reset = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_RESET)); printk 502 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- compatibility = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_COMPATIBILITY)); printk 503 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- decode control = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_DECODE_CONTROL)); printk 504 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- version number = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_VERSION_NUMBER)); printk 505 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- MPU-401 emul. control A/B = 0x%x/0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_MPU401_CONTROL_A), snd_gf1_i_look8(gus, SNDRV_GF1_GB_MPU401_CONTROL_B)); printk 506 sound/isa/gus/gus_io.c printk(KERN_INFO " -S- emulation IRQ = 0x%x\n", snd_gf1_i_look8(gus, SNDRV_GF1_GB_EMULATION_IRQ)); printk 514 sound/isa/gus/gus_io.c printk(count > 0 ? "%02x:" : "%02x", snd_gf1_peek(gus, addr++)); printk 517 sound/isa/gus/gus_io.c printk(count > 0 ? "%04x:" : "%04x", snd_gf1_peek(gus, addr) | (snd_gf1_peek(gus, addr + 1) << 8)); printk 53 sound/isa/gus/gus_irq.c printk(KERN_DEBUG "voice = %i, voice_status = 0x%x, " printk 200 sound/isa/gus/gus_pcm.c printk(KERN_DEBUG "position = 0x%x\n", printk 203 sound/isa/gus/gus_pcm.c printk(KERN_DEBUG "position = 0x%x\n", printk 698 sound/isa/gus/gus_pcm.c printk(KERN_DEBUG "playback.buffer = 0x%lx, gf1.pcm_buffer = 0x%lx\n", printk 121 sound/isa/gus/gus_reset.c printk(KERN_DEBUG " -%i- smart stop voice - volume = 0x%x\n", voice, snd_gf1_i_read16(gus, SNDRV_GF1_VW_VOLUME)); printk 135 sound/isa/gus/gus_reset.c printk(KERN_DEBUG " -%i- stop voice - volume = 0x%x\n", voice, snd_gf1_i_read16(gus, SNDRV_GF1_VW_VOLUME)); printk 157 sound/isa/gus/interwave.c printk(KERN_DEBUG "i2c_setlines - 0x%lx <- %i,%i\n", port, ctrl, data); printk 170 sound/isa/gus/interwave.c printk(KERN_DEBUG "i2c_getclockline - 0x%lx -> %i\n", port, res); printk 184 sound/isa/gus/interwave.c printk(KERN_DEBUG "i2c_getdataline - 0x%lx -> %i\n", port, res); printk 329 sound/isa/gus/interwave.c printk(KERN_DEBUG "d = 0x%x, local = 0x%x, " printk 344 sound/isa/gus/interwave.c printk(KERN_DEBUG "sizes: %i %i %i %i\n", printk 399 sound/isa/gus/interwave.c printk(KERN_DEBUG "lmct = 0x%08x\n", lmct); printk 404 sound/isa/gus/interwave.c printk(KERN_DEBUG "found !!! %i\n", i); printk 228 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": %s, " printk 288 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, " printk 380 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE); printk 385 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE); printk 391 sound/isa/msnd/msnd_pinnacle.c printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n"); printk 395 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n"); printk 428 sound/isa/msnd/msnd_pinnacle.c printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n"); printk 438 sound/isa/msnd/msnd_pinnacle.c printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n"); printk 469 sound/isa/msnd/msnd_pinnacle.c printk(KERN_WARNING LOGNAME ": DSP reset failed\n"); printk 504 sound/isa/msnd/msnd_pinnacle.c printk(KERN_WARNING LOGNAME ": ADC calibration failed\n"); printk 538 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", chip->irq); printk 547 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME printk 556 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME printk 574 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": error creating new PCM device\n"); printk 580 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": error creating new Mixer device\n"); printk 595 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME printk 645 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": snd_msnd_write_cfg: I/O error\n"); printk 734 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": Resetting all devices\n"); printk 815 sound/isa/msnd/msnd_pinnacle.c printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n"); printk 828 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set " printk 835 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME printk 848 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME printk 859 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": \"mem\" - must be set to " printk 867 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": Assuming PnP mode\n"); printk 869 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME printk 890 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": Assuming PnP mode\n"); printk 933 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%lx\n", printk 937 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Config port 0x%lx conflict\n", printk 961 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME printk 976 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME printk 989 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO LOGNAME printk 1028 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Probe failed\n"); printk 1035 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Attach failed\n"); printk 1097 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO "msnd_pinnacle: device is inactive\n"); printk 1102 sound/isa/msnd/msnd_pinnacle.c printk(KERN_INFO "msnd_pinnacle: MPU device is inactive\n"); printk 1153 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Probe failed\n"); printk 1159 sound/isa/msnd/msnd_pinnacle.c printk(KERN_ERR LOGNAME ": Attach failed\n"); printk 165 sound/isa/opl3sa2.c printk(KERN_DEBUG "read [0x%lx] = 0x%x\n", port, inb(port)); printk 170 sound/isa/opl3sa2.c printk(KERN_DEBUG "read [0x%lx] = 0x%x [0x%x]\n", printk 272 sound/isa/sb/jazz16.c printk(KERN_ERR "Media Vision Jazz16 board not detected\n"); printk 288 sound/isa/sb/jazz16.c printk(KERN_ERR "Media Vision Jazz16 configuration failed\n"); printk 411 sound/isa/sc6000.c printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n", printk 497 sound/isa/sc6000.c printk(KERN_ERR PFX "specify IO port\n"); printk 501 sound/isa/sc6000.c printk(KERN_ERR PFX "specify MSS port\n"); printk 505 sound/isa/sc6000.c printk(KERN_ERR PFX "Port must be 0x220 or 0x240\n"); printk 509 sound/isa/sc6000.c printk(KERN_ERR PFX "MSS port must be 0x530 or 0xe80\n"); printk 513 sound/isa/sc6000.c printk(KERN_ERR PFX "invalid IRQ %d\n", irq[dev]); printk 517 sound/isa/sc6000.c printk(KERN_ERR PFX "invalid DMA %d\n", dma[dev]); printk 522 sound/isa/sc6000.c printk(KERN_ERR PFX "invalid MPU-401 port %lx\n", printk 529 sound/isa/sc6000.c printk(KERN_ERR PFX "invalid MPU-401 IRQ %d\n", mpu_irq[dev]); printk 976 sound/isa/sscape.c printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", printk 1000 sound/isa/sscape.c printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n", printk 1144 sound/isa/sscape.c printk(KERN_INFO printk 225 sound/isa/wss/wss_lib.c printk(KERN_DEBUG "ext out : reg = 0x%x, val = 0x%x\n", reg, val); printk 241 sound/isa/wss/wss_lib.c printk(KERN_DEBUG "ext in : reg = 0x%x, val = 0x%x\n", printk 253 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 258 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 263 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 268 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 273 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 278 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 283 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 288 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 293 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 298 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 303 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 308 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 313 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 318 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 323 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 328 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 333 sound/isa/wss/wss_lib.c printk(KERN_DEBUG printk 15 sound/last.c printk(KERN_INFO "ALSA device list:\n"); printk 19 sound/last.c printk(KERN_INFO " #%i: %s\n", idx, card->longname); printk 25 sound/last.c printk(KERN_INFO " No soundcards found.\n"); printk 473 sound/mips/ad1843.c printk(KERN_ERR "ad1843: AD1843 won't initialize\n"); printk 485 sound/mips/ad1843.c printk(KERN_ERR printk 792 sound/mips/hal2.c printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n", printk 812 sound/mips/hal2.c printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ); printk 836 sound/mips/sgio2audio.c printk(KERN_ERR printk 858 sound/mips/sgio2audio.c printk(KERN_ERR "sgio2audio: cannot allocate irq %d\n", printk 1485 sound/oss/dmasound/dmasound_atari.c printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; printk 1499 sound/oss/dmasound/dmasound_atari.c printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ; printk 1607 sound/oss/dmasound/dmasound_atari.c printk("DMA sound driver: Timer A interrupt already in use\n"); printk 459 sound/oss/dmasound/dmasound_core.c printk("dmasound_core: tried to sq_setup a locked queue\n") ; printk 512 sound/oss/dmasound/dmasound_core.c printk("dmasound_core: invalid frag size (user set %d)\n", sq->user_frag_size) ; printk 523 sound/oss/dmasound/dmasound_core.c printk("dmasound_core: invalid frag count (user set %d)\n", sq->user_frags) ; printk 868 sound/oss/dmasound/dmasound_core.c printk(KERN_WARNING "dmasound: Timeout draining output\n"); printk 961 sound/oss/dmasound/dmasound_core.c printk("dmasound_core: tried to set_queue_frags on a locked queue\n") ; printk 1183 sound/oss/dmasound/dmasound_core.c printk(KERN_ERR "dmasound_core: couldn't register fops\n") ; printk 1335 sound/oss/dmasound/dmasound_core.c printk("dmasound: stat buffer used %d bytes\n", len) ; printk 1339 sound/oss/dmasound/dmasound_core.c printk(KERN_ERR "dmasound_core: stat buffer overflowed!\n"); printk 1420 sound/oss/dmasound/dmasound_core.c printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n"); printk 1427 sound/oss/dmasound/dmasound_core.c printk(KERN_INFO "%s DMA sound driver rev %03d installed\n", printk 1430 sound/oss/dmasound/dmasound_core.c printk(KERN_INFO printk 1434 sound/oss/dmasound/dmasound_core.c printk(KERN_INFO "Write will use %4d fragments of %7d bytes as default\n", printk 1476 sound/oss/dmasound/dmasound_core.c printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius); printk 1482 sound/oss/dmasound/dmasound_core.c printk("dmasound_setup: invalid number of buffers, using default = %d\n", numWriteBufs); printk 1490 sound/oss/dmasound/dmasound_core.c printk("dmasound_setup: invalid write buffer size, using default = %d\n", writeBufSize); printk 1496 sound/oss/dmasound/dmasound_core.c printk("dmasound_setup: invalid number of arguments\n"); printk 662 sound/oss/dmasound/dmasound_paula.c printk(KERN_ERR "dmasound_paula: overflowed state buffer alloc.\n") ; printk 472 sound/parisc/harmony.c printk(KERN_DEBUG PFX "playback_pointer is 0x%lx-0x%lx = %d bytes\n", printk 501 sound/parisc/harmony.c printk(KERN_DEBUG PFX "capture_pointer is 0x%lx-0x%lx = %d bytes\n", printk 644 sound/parisc/harmony.c printk(KERN_ERR PFX "cannot allocate graveyard buffer!\n"); printk 654 sound/parisc/harmony.c printk(KERN_ERR PFX "cannot allocate silence buffer!\n"); printk 912 sound/parisc/harmony.c printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n", printk 921 sound/parisc/harmony.c printk(KERN_ERR PFX "could not obtain interrupt %d", printk 36 sound/pci/ak4531_codec.c printk(KERN_DEBUG "ak4531 0x%x: 0x%x\n", printk 79 sound/pci/als300.c #define snd_als300_dbgplay(format, args...) printk(KERN_ERR format, ##args) printk 273 sound/pci/asihpi/asihpi.c printk(KERN_WARNING printk 20 sound/pci/asihpi/hpidebug.c printk(KERN_INFO "debug start\n"); printk 40 sound/pci/asihpi/hpidebug.c printk(KERN_DEBUG "HPI_MSG%d,%d,%d,%d,%d\n", phm->version, printk 60 sound/pci/asihpi/hpidebug.c printk(KERN_DEBUG "%p:", (pdata + i)); printk 63 sound/pci/asihpi/hpidebug.c printk(KERN_CONT "%s%04x", k == 0 ? "" : " ", pdata[i]); printk 65 sound/pci/asihpi/hpidebug.c printk(KERN_CONT "\n"); printk 40 sound/pci/asihpi/hpidebug.h printk(KERN_ERR FILE_LINE \ printk 48 sound/pci/asihpi/hpidebug.h printk(HPI_DEBUG_FLAG_##level \ printk 82 sound/pci/asihpi/hpidebug.h printk(KERN_DEBUG "HPI_RES%d,%d,%d\n", \ printk 569 sound/pci/asihpi/hpioctl.c printk(KERN_INFO "ASIHPI driver " HPI_VER_STRING "\n"); printk 2317 sound/pci/azt3328.c printk(KERN_DEBUG "reg %04x bit %d: %02x %02x %02x\n", printk 31 sound/pci/korg1212/korg1212.c #define K1212_DEBUG_PRINTK(fmt,args...) printk(KERN_DEBUG fmt,##args) printk 36 sound/pci/korg1212/korg1212.c #define K1212_DEBUG_PRINTK_VERBOSE(fmt,args...) printk(KERN_DEBUG fmt,##args) printk 1276 sound/pci/korg1212/korg1212.c printk(KERN_DEBUG "K1212_DEBUG: snd_korg1212_silence KERNEL EFAULT dst=%p iter=%d\n", printk 1310 sound/pci/korg1212/korg1212.c printk(KERN_DEBUG "K1212_DEBUG: snd_korg1212_copy_to KERNEL EFAULT, src=%p dst=%p iter=%d\n", src, dst, i); printk 1349 sound/pci/korg1212/korg1212.c printk(KERN_DEBUG "K1212_DEBUG: snd_korg1212_copy_from KERNEL EFAULT, src=%p dst=%p iter=%d\n", src, dst, i); printk 73 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "PDAUDIOCF DUMP (0x%lx):\n", chip->port); printk 74 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "WPD : 0x%x\n", printk 76 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "RDP : 0x%x\n", printk 78 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "TCR : 0x%x\n", printk 80 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "SCR : 0x%x\n", printk 82 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "ISR : 0x%x\n", printk 84 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "IER : 0x%x\n", printk 86 sound/pcmcia/pdaudiocf/pdaudiocf_core.c printk(KERN_DEBUG "AK_IFR : 0x%x\n", printk 25 sound/ppc/burgundy.c printk(KERN_DEBUG "burgundy_busy_wait: timeout\n"); printk 36 sound/ppc/burgundy.c printk(KERN_DEBUG "burgundy_extend_wait: timeout #1\n"); printk 41 sound/ppc/burgundy.c printk(KERN_DEBUG "burgundy_extend_wait: timeout #2\n"); printk 614 sound/ppc/burgundy.c printk(KERN_WARNING "pmac burgundy: disabled by MacOS :-(\n"); printk 991 sound/ppc/pmac.c printk(KERN_INFO "snd-powermac no longer handles any " printk 1048 sound/ppc/pmac.c printk(KERN_WARNING "snd-powermac: can't locate macio !\n"); printk 1061 sound/ppc/pmac.c printk(KERN_WARNING "snd-powermac: can't locate macio PCI" printk 1152 sound/ppc/pmac.c printk(KERN_ERR "snd-powermac: Failed to add automute control\n"); printk 1206 sound/ppc/pmac.c printk(KERN_ERR "snd: can't translate rsrc " printk 1214 sound/ppc/pmac.c printk(KERN_ERR "snd: can't request rsrc " printk 1231 sound/ppc/pmac.c printk(KERN_ERR "snd: can't translate rsrc " printk 1239 sound/ppc/pmac.c printk(KERN_ERR "snd: can't request rsrc " printk 32 sound/ppc/tumbler.c #define DBG(fmt...) printk(KERN_DEBUG fmt) printk 1227 sound/ppc/tumbler.c printk(KERN_ERR "tumbler_init_client error\n"); printk 1229 sound/ppc/tumbler.c printk(KERN_ERR "tumbler: i2c is not initialized\n"); printk 403 sound/sh/sh_dac_audio.c printk(KERN_INFO "%s %s", card->longname, card->shortname); printk 546 sound/soc/atmel/atmel_ssc_dai.c printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); printk 595 sound/soc/atmel/atmel_ssc_dai.c printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", printk 683 sound/soc/atmel/atmel_ssc_dai.c printk(KERN_WARNING printk 179 sound/soc/au1x/ac97c.c printk(KERN_ERR "ac97c: codec not ready after cold reset\n"); printk 33 sound/soc/au1x/dbdma2.c #define MSG(x...) printk(KERN_INFO "au1xpsc_pcm: " x) printk 183 sound/soc/au1x/psc-ac97.c printk(KERN_ERR "au1xpsc-ac97: PSC not ready!\n"); printk 196 sound/soc/au1x/psc-ac97.c printk(KERN_ERR "au1xpsc-ac97: AC97 ctrl not ready\n"); printk 260 sound/soc/au1x/psc-ac97.c printk(KERN_ERR "PSC-AC97: can't disable!\n"); printk 276 sound/soc/au1x/psc-ac97.c printk(KERN_ERR "PSC-AC97: can't enable!\n"); printk 1340 sound/soc/codecs/da7210.c printk(KERN_ERR "Failed to register da7210 SPI driver: %d\n", printk 317 sound/soc/codecs/tlv320aic23.c printk(KERN_ERR "%s:Invalid rate %u,%u requested\n", printk 326 sound/soc/codecs/tlv320aic23.c printk(KERN_DEBUG "actual samplerate = %u,%u reg=%x\n", printk 65 sound/soc/codecs/tlv320aic32x4.c printk(KERN_DEBUG "%s: Mic Bias will be turned ON\n", __func__); printk 70 sound/soc/codecs/tlv320aic32x4.c printk(KERN_DEBUG "%s: Mic Bias will be turned OFF\n", printk 102 sound/soc/codecs/tlv320aic32x4.c printk(KERN_ERR "%s: MFP2 is not configure as a GPIO output\n", printk 143 sound/soc/codecs/tlv320aic32x4.c printk(KERN_ERR "%s: MFP4 is not configure as a GPIO output\n", printk 183 sound/soc/codecs/tlv320aic32x4.c printk(KERN_ERR "%s: MFP5 is not configure as a GPIO output\n", printk 596 sound/soc/codecs/tlv320aic32x4.c printk(KERN_ERR "aic32x4: invalid DAI master/slave interface\n"); printk 623 sound/soc/codecs/tlv320aic32x4.c printk(KERN_ERR "aic32x4: invalid DAI interface format\n"); printk 1179 sound/soc/codecs/tlv320aic3x.c printk(KERN_ERR "%s(): unable to setup PLL\n", __func__); printk 205 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unsupported fs\n", __func__); printk 228 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unsupported format (right)\n", printk 237 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unsupported format\n", __func__); printk 263 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unsupported sysclk\n", __func__); printk 277 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unsupported slave mode\n", __func__); printk 283 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unsupported clock inversion\n", __func__); printk 455 sound/soc/codecs/uda134x.c printk(KERN_INFO "UDA134X SoC Audio Codec\n"); printk 464 sound/soc/codecs/uda134x.c printk(KERN_ERR "UDA134X SoC codec: " printk 485 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s failed to register dapm controls: %d", printk 505 sound/soc/codecs/uda134x.c printk(KERN_ERR "%s unknown codec type: %d", printk 511 sound/soc/codecs/uda134x.c printk(KERN_ERR "UDA134X: failed to register controls\n"); printk 987 sound/soc/codecs/wm8350.c printk(KERN_ERR "wm8350: fll freq %d out of range\n", output); printk 333 sound/soc/codecs/wm8400.c printk(KERN_WARNING printk 341 sound/soc/codecs/wm8400.c printk(KERN_WARNING printk 349 sound/soc/codecs/wm8400.c printk(KERN_WARNING printk 357 sound/soc/codecs/wm8400.c printk(KERN_WARNING printk 291 sound/soc/codecs/wm8510.c printk(KERN_WARNING printk 693 sound/soc/codecs/wm8510.c printk(KERN_ERR "Failed to register WM8510 I2C driver: %d\n", printk 700 sound/soc/codecs/wm8510.c printk(KERN_ERR "Failed to register WM8510 SPI driver: %d\n", printk 423 sound/soc/codecs/wm8580.c printk(KERN_ERR "wm8580: Unable to scale output frequency " printk 438 sound/soc/codecs/wm8580.c printk(KERN_ERR printk 479 sound/soc/codecs/wm8711.c printk(KERN_ERR "Failed to register WM8711 I2C driver: %d\n", printk 486 sound/soc/codecs/wm8711.c printk(KERN_ERR "Failed to register WM8711 SPI driver: %d\n", printk 320 sound/soc/codecs/wm8728.c printk(KERN_ERR "Failed to register wm8728 I2C driver: %d\n", printk 327 sound/soc/codecs/wm8728.c printk(KERN_ERR "Failed to register wm8728 SPI driver: %d\n", printk 813 sound/soc/codecs/wm8731.c printk(KERN_ERR "Failed to register WM8731 I2C driver: %d\n", printk 820 sound/soc/codecs/wm8731.c printk(KERN_ERR "Failed to register WM8731 SPI driver: %d\n", printk 707 sound/soc/codecs/wm8737.c printk(KERN_ERR "Failed to register WM8737 I2C driver: %d\n", printk 714 sound/soc/codecs/wm8737.c printk(KERN_ERR "Failed to register WM8737 SPI driver: %d\n", printk 687 sound/soc/codecs/wm8741.c printk(KERN_ERR "Failed to register wm8741 SPI driver: %d\n", printk 494 sound/soc/codecs/wm8750.c printk(KERN_ERR "wm8750: could not get coeff for mclk %d @ rate %d\n", printk 691 sound/soc/codecs/wm8750.c printk(KERN_ERR "wm8750: failed to reset: %d\n", ret); printk 828 sound/soc/codecs/wm8750.c printk(KERN_ERR "Failed to register wm8750 I2C driver: %d\n", printk 835 sound/soc/codecs/wm8750.c printk(KERN_ERR "Failed to register wm8750 SPI driver: %d\n", printk 717 sound/soc/codecs/wm8753.c printk(KERN_WARNING printk 1162 sound/soc/codecs/wm8753.c printk(KERN_ERR "wm8753 invalid MCLK or rate\n"); printk 1602 sound/soc/codecs/wm8753.c printk(KERN_ERR "Failed to register wm8753 I2C driver: %d\n", printk 1609 sound/soc/codecs/wm8753.c printk(KERN_ERR "Failed to register wm8753 SPI driver: %d\n", printk 538 sound/soc/codecs/wm8776.c printk(KERN_ERR "Failed to register wm8776 I2C driver: %d\n", printk 545 sound/soc/codecs/wm8776.c printk(KERN_ERR "Failed to register wm8776 SPI driver: %d\n", printk 705 sound/soc/codecs/wm8900.c printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u" printk 708 sound/soc/codecs/wm8900.c printk(KERN_ERR "wm8900: Invalid FLL division rate %u, " printk 1325 sound/soc/codecs/wm8900.c printk(KERN_ERR "Failed to register wm8900 I2C driver: %d\n", printk 1332 sound/soc/codecs/wm8900.c printk(KERN_ERR "Failed to register wm8900 SPI driver: %d\n", printk 550 sound/soc/codecs/wm8940.c printk(KERN_WARNING printk 298 sound/soc/codecs/wm8974.c printk(KERN_WARNING printk 765 sound/soc/codecs/wm8983.c printk(KERN_ERR "%s: WM8983 N value is not within" printk 1084 sound/soc/codecs/wm8983.c printk(KERN_ERR "Failed to register wm8983 I2C driver: %d\n", printk 1091 sound/soc/codecs/wm8983.c printk(KERN_ERR "Failed to register wm8983 SPI driver: %d\n", printk 862 sound/soc/codecs/wm8985.c printk(KERN_ERR "%s: WM8985 N value is not within" printk 1219 sound/soc/codecs/wm8985.c printk(KERN_ERR "Failed to register wm8985 I2C driver: %d\n", printk 1226 sound/soc/codecs/wm8985.c printk(KERN_ERR "Failed to register wm8985 SPI driver: %d\n", printk 920 sound/soc/codecs/wm8988.c printk(KERN_ERR "Failed to register WM8988 I2C driver: %d\n", printk 927 sound/soc/codecs/wm8988.c printk(KERN_ERR "Failed to register WM8988 SPI driver: %d\n", printk 382 sound/soc/codecs/wm8990.c printk(KERN_WARNING printk 390 sound/soc/codecs/wm8990.c printk(KERN_WARNING printk 398 sound/soc/codecs/wm8990.c printk(KERN_WARNING printk 406 sound/soc/codecs/wm8990.c printk(KERN_WARNING printk 909 sound/soc/codecs/wm8990.c printk(KERN_WARNING printk 369 sound/soc/codecs/wm8991.c printk(KERN_WARNING printk 378 sound/soc/codecs/wm8991.c printk(KERN_WARNING printk 387 sound/soc/codecs/wm8991.c printk(KERN_WARNING printk 396 sound/soc/codecs/wm8991.c printk(KERN_WARNING printk 901 sound/soc/codecs/wm8991.c printk(KERN_WARNING printk 2283 sound/soc/codecs/wm8995.c printk(KERN_ERR "Failed to register wm8995 I2C driver: %d\n", printk 2290 sound/soc/codecs/wm8995.c printk(KERN_ERR "Failed to register wm8995 SPI driver: %d\n", printk 95 sound/soc/fsl/phycore-ac97.c printk(KERN_ERR "ASoC: Platform device allocation failed\n"); printk 51 sound/soc/kirkwood/kirkwood-dma.c printk(KERN_WARNING "%s: got err interrupt 0x%lx\n", printk 59 sound/soc/kirkwood/kirkwood-dma.c printk(KERN_WARNING "%s: unexpected interrupt %lx\n", printk 118 sound/soc/samsung/jive_wm8750.c printk("JIVE WM8750 Audio support\n"); printk 174 sound/soc/samsung/rx1950_uda1380.c printk(KERN_ERR "%s: rate %d is not supported\n", printk 47 sound/soc/samsung/s3c-i2s-v2.c printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn, printk 54 sound/soc/samsung/s3c-i2s-v2.c printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n", printk 60 sound/soc/samsung/s3c-i2s-v2.c printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn, printk 234 sound/soc/samsung/s3c-i2s-v2.c printk(KERN_ERR "%s: timeout\n", __func__); printk 592 sound/soc/samsung/s3c-i2s-v2.c printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n", printk 608 sound/soc/samsung/s3c-i2s-v2.c printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n", printk 25 sound/soc/samsung/smdk_spdif.c printk(KERN_WARNING "%s: Cannot find fout_epll.\n", printk 32 sound/soc/samsung/smdk_spdif.c printk(KERN_WARNING "%s: Cannot find mout_epll.\n", printk 40 sound/soc/samsung/smdk_spdif.c printk(KERN_WARNING "%s: Cannot find sclk_audio.\n", printk 48 sound/soc/samsung/smdk_spdif.c printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n", printk 81 sound/soc/samsung/smdk_spdif.c printk(KERN_ERR "%s: failed to get fout_epll\n", __func__); printk 90 sound/soc/samsung/smdk_spdif.c printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__); printk 211 sound/soc/sh/hac.c printk(KERN_INFO "hac: reset: AC97 link down!\n"); printk 562 sound/soc/soc-pcm.c printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n", printk 567 sound/soc/soc-pcm.c printk(KERN_ERR "ASoC: %s <-> %s No matching formats\n", printk 573 sound/soc/soc-pcm.c printk(KERN_ERR "ASoC: %s <-> %s No matching channels\n", printk 268 sound/soc/ti/davinci-i2s.c printk(KERN_ERR "%s:bad master\n", __func__); printk 300 sound/soc/ti/davinci-i2s.c printk(KERN_ERR "%s:bad format\n", __func__); printk 465 sound/soc/ti/davinci-i2s.c printk(KERN_WARNING "davinci-i2s: unsupported PCM format\n"); printk 173 sound/soc/ti/davinci-mcasp.c printk(KERN_ERR "GBLCTL write error\n"); printk 1066 sound/soc/ti/davinci-mcasp.c printk(KERN_WARNING "unsupported sampling rate: %d\n", rate); printk 1199 sound/soc/ti/davinci-mcasp.c printk(KERN_WARNING "davinci-mcasp: unsupported PCM format"); printk 122 sound/soc/ti/davinci-vcif.c printk(KERN_WARNING "davinci-vcif: unsupported PCM format"); printk 67 sound/soc/ti/omap-abe-twl6040.c printk(KERN_ERR "can't set codec system clock\n"); printk 87 sound/soc/ti/omap-abe-twl6040.c printk(KERN_ERR "can't set DMIC cpu system clock\n"); printk 93 sound/soc/ti/omap-abe-twl6040.c printk(KERN_ERR "can't set DMIC output clock\n"); printk 1051 sound/soc/ti/omap-mcbsp.c printk(KERN_ERR "%s: not enough bandwidth for desired rate and " printk 50 sound/soc/ti/osk5912.c printk(KERN_ERR "can't set codec system clock\n"); printk 132 sound/soc/ti/osk5912.c printk(KERN_ERR "Could not get mclk clock\n"); printk 143 sound/soc/ti/osk5912.c printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n"); printk 149 sound/soc/ti/osk5912.c printk(KERN_INFO "MCLK = %d [%d]\n", printk 60 sound/soc/txx9/txx9aclc-ac97.c printk(KERN_ERR "ac97 read timeout (reg %#x)\n", reg); printk 66 sound/soc/txx9/txx9aclc-ac97.c printk(KERN_ERR "reg mismatch %x with %x\n", printk 89 sound/soc/txx9/txx9aclc-ac97.c printk(KERN_ERR printk 366 sound/soc/txx9/txx9aclc.c printk(KERN_ERR printk 227 sound/sound_core.c printk(KERN_ERR "Sound device %d went missing!\n", unit); printk 613 sound/sound_core.c printk(KERN_ERR "soundcore: sound device already in use.\n"); printk 112 sound/sparc/dbri.c #define dprintk(a, x...) if (dbri_debug & a) printk(KERN_DEBUG x) printk 599 sound/sparc/dbri.c printk(KERN_ERR "DBRI reverse_bytes: unsupported length\n"); printk 654 sound/sparc/dbri.c printk(KERN_ERR "DBRI: Chip never completed command buffer\n"); printk 675 sound/sparc/dbri.c printk(KERN_ERR "DBRI: no space for commands."); printk 829 sound/sparc/dbri.c printk(KERN_ERR "DBRI: reset_pipe called with " printk 836 sound/sparc/dbri.c printk(KERN_ERR "DBRI: reset_pipe called " printk 865 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_pipe called " printk 871 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_pipe called " printk 903 sound/sparc/dbri.c printk(KERN_ERR printk 911 sound/sparc/dbri.c printk(KERN_ERR "DBRI: link_time_slot called " printk 962 sound/sparc/dbri.c printk(KERN_ERR printk 1008 sound/sparc/dbri.c printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n"); printk 1013 sound/sparc/dbri.c printk(KERN_ERR "DBRI: xmit_fixed: " printk 1019 sound/sparc/dbri.c printk(KERN_ERR "DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe); printk 1024 sound/sparc/dbri.c printk(KERN_ERR "DBRI: xmit_fixed: Called on receive pipe %d\n", printk 1050 sound/sparc/dbri.c printk(KERN_ERR "DBRI: recv_fixed called with " printk 1056 sound/sparc/dbri.c printk(KERN_ERR "DBRI: recv_fixed called on " printk 1062 sound/sparc/dbri.c printk(KERN_ERR "DBRI: recv_fixed called on " printk 1097 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_descs: Illegal pipe number\n"); printk 1102 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_descs: Uninitialized pipe %d\n", printk 1112 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_descs: " printk 1118 sound/sparc/dbri.c printk(KERN_ERR printk 1127 sound/sparc/dbri.c printk(KERN_ERR "DBRI: recv_on_pipe: " printk 1159 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_descs: No descriptors\n"); printk 1199 sound/sparc/dbri.c printk(KERN_ERR "DBRI: setup_descs: " printk 1283 sound/sparc/dbri.c printk(KERN_ERR "DBRI: illegal bits_per_frame " printk 1598 sound/sparc/dbri.c printk(KERN_WARNING "DBRI: Unsupported rate %d Hz\n", rate); printk 1620 sound/sparc/dbri.c printk(KERN_WARNING "DBRI: Unsupported format %d\n", format); printk 1658 sound/sparc/dbri.c printk(KERN_INFO "DBRI: Using speakerbox / " printk 1665 sound/sparc/dbri.c printk(KERN_ERR "DBRI: no mmcodec found.\n"); printk 1789 sound/sparc/dbri.c printk(KERN_ERR "DBRI: invalid td on pipe %d\n", pipe); printk 1819 sound/sparc/dbri.c printk(KERN_ERR "DBRI: invalid rd on pipe %d\n", pipe); printk 1862 sound/sparc/dbri.c printk(KERN_ERR "DBRI: Command read interrupt\n"); printk 1877 sound/sparc/dbri.c printk(KERN_ERR "DBRI: Underrun error\n"); printk 1903 sound/sparc/dbri.c printk(KERN_WARNING printk 1946 sound/sparc/dbri.c printk(KERN_ERR printk 1950 sound/sparc/dbri.c printk(KERN_ERR printk 1954 sound/sparc/dbri.c printk(KERN_ERR printk 1957 sound/sparc/dbri.c printk(KERN_ERR printk 2104 sound/sparc/dbri.c printk(KERN_ERR "malloc_pages failed with %d\n", ret); printk 2553 sound/sparc/dbri.c printk(KERN_ERR "DBRI: could not allocate registers\n"); printk 2562 sound/sparc/dbri.c printk(KERN_ERR "DBRI: Can't get irq %d\n", dbri->irq); printk 2615 sound/sparc/dbri.c printk(KERN_ERR "DBRI-%d: No IRQ.\n", dev); printk 2654 sound/sparc/dbri.c printk(KERN_INFO "audio%d at %p (irq %d) is DBRI(%c)+CS4215(%d)\n", printk 524 sound/synth/emux/soundfont.c printk(KERN_ERR "Soundfont error: invalid patch zone length\n"); printk 534 sound/synth/emux/soundfont.c printk(KERN_ERR "Soundfont error: Illegal voice number %d\n", printk 540 sound/synth/emux/soundfont.c printk(KERN_ERR "Soundfont Error: " printk 375 sound/usb/6fire/firmware.c printk(KERN_CONT "%02x ", buffer[i]); printk 376 sound/usb/6fire/firmware.c printk(KERN_CONT "\n"); printk 411 sound/usb/6fire/firmware.c printk(KERN_CONT "%02x ", buffer[i]); printk 412 sound/usb/6fire/firmware.c printk(KERN_CONT "\n"); printk 10 sound/usb/debug.h #define hwc_debug(fmt, args...) printk(KERN_DEBUG fmt, ##args) printk 245 sound/usb/midi.c printk(KERN_CONT " %02x", *data); printk 246 sound/usb/midi.c printk(KERN_CONT " ]\n"); printk 417 sound/usb/usx2y/usb_stream.c printk(KERN_DEBUG"%s:%i %i\n", __func__, __LINE__, printk 627 sound/usb/usx2y/usb_stream.c printk(KERN_DEBUG"%s:%i: %i", __func__, __LINE__, printk 631 sound/usb/usx2y/usb_stream.c printk(KERN_CONT " %i", l); printk 633 sound/usb/usx2y/usb_stream.c printk(KERN_CONT "\n"); printk 675 tools/lib/traceevent/event-parse.c char *printk; printk 681 tools/lib/traceevent/event-parse.c char *printk; printk 712 tools/lib/traceevent/event-parse.c printk_map[i].printk = printklist->printk; printk 731 tools/lib/traceevent/event-parse.c struct printk_map *printk; printk 739 tools/lib/traceevent/event-parse.c printk = bsearch(&key, tep->printk_map, tep->printk_count, printk 742 tools/lib/traceevent/event-parse.c return printk; printk 769 tools/lib/traceevent/event-parse.c item->printk = strdup(fmt); printk 770 tools/lib/traceevent/event-parse.c if (!item->printk) printk 773 tools/lib/traceevent/event-parse.c p = item->printk + strlen(item->printk) - 1; printk 808 tools/lib/traceevent/event-parse.c tep->printk_map[i].printk); printk 3945 tools/lib/traceevent/event-parse.c struct printk_map *printk; printk 3999 tools/lib/traceevent/event-parse.c printk = find_printk(tep, addr); printk 4000 tools/lib/traceevent/event-parse.c if (printk) printk 4001 tools/lib/traceevent/event-parse.c trace_seq_puts(s, printk->printk); printk 4482 tools/lib/traceevent/event-parse.c struct printk_map *printk; printk 4498 tools/lib/traceevent/event-parse.c printk = find_printk(tep, addr); printk 4499 tools/lib/traceevent/event-parse.c if (!printk) { printk 4505 tools/lib/traceevent/event-parse.c if (asprintf(&format, "%s: %s", "%ps", printk->printk) < 0) printk 7042 tools/lib/traceevent/event-parse.c free(tep->printk_map[i].printk); printk 7048 tools/lib/traceevent/event-parse.c free(printklist->printk); printk 127 tools/perf/util/trace-event-parse.c char *printk; printk 142 tools/perf/util/trace-event-parse.c printk = strdup(fmt+1); printk 144 tools/perf/util/trace-event-parse.c tep_register_print_string(pevent, printk, addr); printk 145 tools/perf/util/trace-event-parse.c free(printk); printk 83 tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c printk(KERN_DEBUG "start--> \n"); printk 92 tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c printk(KERN_DEBUG "t1: %08u t2: %08u diff_pmtmr: %08u diff_tsc: %016llu\n", then, now, diff, diff_tsc); printk 96 tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c printk(KERN_DEBUG "<-- end \n"); printk 192 tools/testing/radix-tree/idr-test.c printk("vvv Ignore these warnings\n"); printk 203 tools/testing/radix-tree/idr-test.c printk("^^^ Warnings over\n"); printk 17 tools/testing/radix-tree/linux/kernel.h #define pr_info printk printk 18 tools/testing/radix-tree/linux/kernel.h #define pr_debug printk printk 19 tools/testing/radix-tree/linux/kernel.h #define pr_cont printk