pr_err 121 arch/arc/kernel/module.c pr_err("%s: unknown relocation: %u\n", pr_err 579 arch/arc/kernel/perf_event.c pr_err("This core does not have performance counters!\n"); pr_err 644 arch/arc/kernel/perf_event.c pr_err("Cannot get IRQ number for the platform\n"); pr_err 305 arch/arc/kernel/process.c pr_err("ELF not built for %s ISA\n", pr_err 312 arch/arc/kernel/process.c pr_err("ABI mismatch - you need newer toolchain\n"); pr_err 258 arch/arc/kernel/unaligned.c pr_err("Alignment trap: fault in fix-up %08lx at [<%08lx>]\n", pr_err 157 arch/arc/plat-eznps/mtm.c pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", pr_err 41 arch/arc/plat-eznps/smp.c pr_err("Failed to get present-cpus from dtb"); pr_err 47 arch/arc/plat-eznps/smp.c pr_err("Failed to get possible-cpus from dtb"); pr_err 136 arch/arc/plat-hsdk/platform.c pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non"); pr_err 190 arch/arm/common/bL_switcher.c pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret); pr_err 254 arch/arm/common/bL_switcher.c pr_err("%s exiting with error %d\n", __func__, ret); pr_err 317 arch/arm/common/bL_switcher.c pr_err("%s failed for CPU %d\n", __func__, cpu); pr_err 350 arch/arm/common/bL_switcher.c pr_err("%s: cpu %d out of bounds\n", __func__, cpu); pr_err 403 arch/arm/common/bL_switcher.c pr_err("%s: notifier chain failed with status 0x%x\n", pr_err 432 arch/arm/common/bL_switcher.c pr_err("%s: only dual cluster systems are supported\n", __func__); pr_err 440 arch/arm/common/bL_switcher.c pr_err("%s: no CPU pairing possible\n", __func__); pr_err 491 arch/arm/common/bL_switcher.c pr_err("%s: bad GIC ID for CPU %d\n", __func__, i); pr_err 786 arch/arm/common/bL_switcher.c pr_err("bL_switcher: Failed to allocate a hotplug state\n"); pr_err 798 arch/arm/common/bL_switcher.c pr_err("%s: unable to create sysfs entry\n", __func__); pr_err 415 arch/arm/common/mcpm_entry.c pr_err("%s returned %d\n", __func__, ret); pr_err 306 arch/arm/common/sa1111.c pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n", pr_err 72 arch/arm/kernel/atags_proc.c pr_err("Exporting ATAGs: not enough memory\n"); pr_err 445 arch/arm/kernel/bios32.c pr_err("PCI: unable to allocate I/O port region (%d)\n", ret); pr_err 219 arch/arm/kernel/dma-isa.c pr_err("ISADMA%u: unable to register: %d\n", pr_err 79 arch/arm/kernel/dma.c pr_err("dma: trying to allocate DMA%d\n", chan); pr_err 100 arch/arm/kernel/dma.c pr_err("dma%d: freeing active DMA\n", chan); pr_err 111 arch/arm/kernel/dma.c pr_err("dma%d: trying to free free DMA\n", chan); pr_err 115 arch/arm/kernel/dma.c pr_err("dma: trying to free DMA%d\n", chan); pr_err 126 arch/arm/kernel/dma.c pr_err("dma%d: altering DMA SG while DMA active\n", chan); pr_err 143 arch/arm/kernel/dma.c pr_err("dma%d: altering DMA address while DMA active\n", chan); pr_err 160 arch/arm/kernel/dma.c pr_err("dma%d: altering DMA count while DMA active\n", chan); pr_err 175 arch/arm/kernel/dma.c pr_err("dma%d: altering DMA mode while DMA active\n", chan); pr_err 198 arch/arm/kernel/dma.c pr_err("dma%d: trying to enable free DMA\n", chan); pr_err 219 arch/arm/kernel/dma.c pr_err("dma%d: trying to disable free DMA\n", chan); pr_err 236 arch/arm/kernel/dma.c pr_err("dma%d: trying to set_dma_page\n", chan); pr_err 128 arch/arm/kernel/fiq.c pr_err("%s FIQ trying to release %s FIQ\n", pr_err 95 arch/arm/kernel/irq.c pr_err("L2C: failed to init: %d\n", ret); pr_err 210 arch/arm/kernel/module-plts.c pr_err("%s: module PLT section(s) missing\n", mod->name); pr_err 214 arch/arm/kernel/module-plts.c pr_err("%s: module symtab section missing\n", mod->name); pr_err 87 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u: bad relocation sym offset\n", pr_err 96 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n", pr_err 118 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n", pr_err 145 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", pr_err 172 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", pr_err 213 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n", pr_err 258 arch/arm/kernel/module.c pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", pr_err 314 arch/arm/kernel/module.c pr_err("%s: unknown relocation: %u\n", pr_err 754 arch/arm/kernel/perf_event_v7.c pr_err("CPU%u reading wrong counter %d\n", pr_err 773 arch/arm/kernel/perf_event_v7.c pr_err("CPU%u writing wrong counter %d\n", pr_err 880 arch/arm/kernel/perf_event_v7.c pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", pr_err 926 arch/arm/kernel/perf_event_v7.c pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", pr_err 680 arch/arm/kernel/setup.c pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n", pr_err 1008 arch/arm/kernel/setup.c pr_err("crashkernel reservation failed - No suitable area found.\n"); pr_err 1018 arch/arm/kernel/setup.c pr_err("crashkernel reservation failed - memory is in use.\n"); pr_err 168 arch/arm/kernel/smp.c pr_err("CPU%u: failed to boot: %d\n", cpu, ret); pr_err 278 arch/arm/kernel/smp.c pr_err("CPU%u: cpu didn't die\n", cpu); pr_err 292 arch/arm/kernel/smp.c pr_err("CPU%u: unable to kill\n", cpu); pr_err 202 arch/arm/kernel/smp_twd.c pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk)); pr_err 208 arch/arm/kernel/smp_twd.c pr_err("smp_twd: clock failed to prepare+enable: %d\n", err); pr_err 284 arch/arm/kernel/smp_twd.c pr_err("twd: can't register interrupt %d (%d)\n", twd_ppi, err); pr_err 138 arch/arm/kernel/tcm.c pr_err("CPU: %sTCM%d of unknown size\n", pr_err 142 arch/arm/kernel/tcm.c pr_err("CPU: %sTCM%d larger than 32k found\n", pr_err 404 arch/arm/kernel/tcm.c pr_err("CPU DTCM: could not add DTCM " \ pr_err 421 arch/arm/kernel/tcm.c pr_err("CPU ITCM: could not add ITCM " \ pr_err 104 arch/arm/kernel/topology.c pr_err("missing device node for CPU %d\n", cpu); pr_err 124 arch/arm/kernel/topology.c pr_err("%pOF missing clock-frequency property\n", cn); pr_err 540 arch/arm/kernel/traps.c pr_err("[%d] %s: obsolete system call %08x.\n", pr_err 660 arch/arm/kernel/traps.c pr_err("[%d] %s: arm syscall %d\n", pr_err 725 arch/arm/kernel/traps.c pr_err("8<--- cut here ---\n"); pr_err 726 arch/arm/kernel/traps.c pr_err("[%d] %s: bad data abort: code %d instr 0x%08lx\n", pr_err 739 arch/arm/kernel/traps.c pr_err("%s called, but not implemented\n", fn); pr_err 746 arch/arm/kernel/traps.c pr_err("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte)); pr_err 751 arch/arm/kernel/traps.c pr_err("%s:%d: bad pmd %08llx.\n", file, line, (long long)pmd_val(pmd)); pr_err 756 arch/arm/kernel/traps.c pr_err("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd)); pr_err 761 arch/arm/kernel/traps.c pr_err("Division by zero in kernel.\n"); pr_err 194 arch/arm/kernel/vdso.c pr_err("VDSO is not a valid ELF object!\n"); pr_err 75 arch/arm/lib/delay.c pr_err("Ignoring delay timer %ps, which has insufficient resolution of %lluns\n", pr_err 101 arch/arm/mach-actions/platsmp.c pr_err("%s: missing timer\n", __func__); pr_err 107 arch/arm/mach-actions/platsmp.c pr_err("%s: could not map timer registers\n", __func__); pr_err 113 arch/arm/mach-actions/platsmp.c pr_err("%s: missing sps\n", __func__); pr_err 119 arch/arm/mach-actions/platsmp.c pr_err("%s: could not map sps registers\n", __func__); pr_err 126 arch/arm/mach-actions/platsmp.c pr_err("%s: missing scu\n", __func__); pr_err 132 arch/arm/mach-actions/platsmp.c pr_err("%s: could not map scu registers\n", __func__); pr_err 24 arch/arm/mach-alpine/platsmp.c pr_err("FAIL: resume address over 32bit (%pa)", &addr); pr_err 21 arch/arm/mach-aspeed/platsmp.c pr_err("could not map the secondary boot base!"); pr_err 42 arch/arm/mach-aspeed/platsmp.c pr_err("secboot device node found!!\n"); pr_err 48 arch/arm/mach-aspeed/platsmp.c pr_err("could not map the secondary boot base!"); pr_err 178 arch/arm/mach-at91/pm.c pr_err("AT91: PM: no ULP1 wakeup sources found!"); pr_err 246 arch/arm/mach-at91/pm.c pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); pr_err 258 arch/arm/mach-at91/pm.c pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); pr_err 776 arch/arm/mach-at91/pm.c pr_err("AT91: PM not supported, PMC not found\n"); pr_err 96 arch/arm/mach-bcm/bcm63xx_pmb.c pr_err("CPU is missing a reg node\n"); pr_err 103 arch/arm/mach-bcm/bcm63xx_pmb.c pr_err("CPU is missing a resets phandle\n"); pr_err 108 arch/arm/mach-bcm/bcm63xx_pmb.c pr_err("reset-controller does not conform to reset-cells\n"); pr_err 114 arch/arm/mach-bcm/bcm63xx_pmb.c pr_err("failed remapping PMB register\n"); pr_err 42 arch/arm/mach-bcm/bcm63xx_smp.c pr_err("no configuration base address register!\n"); pr_err 49 arch/arm/mach-bcm/bcm63xx_smp.c pr_err("hardware reports only one core\n"); pr_err 55 arch/arm/mach-bcm/bcm63xx_smp.c pr_err("failed to remap config base (%lu/%u) for SCU\n", pr_err 116 arch/arm/mach-bcm/bcm63xx_smp.c pr_err("SMP: unable to find bcm63138 boot LUT node\n"); pr_err 124 arch/arm/mach-bcm/bcm63xx_smp.c pr_err("SMP: unable to remap boot LUT base register\n"); pr_err 131 arch/arm/mach-bcm/bcm63xx_smp.c pr_err("SMP: failed to locate secondary CPU%d node\n", cpu); pr_err 36 arch/arm/mach-bcm/kona_l2_cache.c pr_err("Secure Monitor call failed (%u)! Skipping L2 init.\n", pr_err 47 arch/arm/mach-bcm/kona_l2_cache.c pr_err("Couldn't enable L2 cache: %d\n", ret); pr_err 257 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("can't find phandle %s\n", name); pr_err 264 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("iomap failed for cpubiuctrl_block\n"); pr_err 272 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("failed to read 1st entry from %s property (%d)\n", name, pr_err 281 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("failed to read 2nd entry from %s property (%d)\n", name, pr_err 302 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("can't find phandle %s\n", name); pr_err 309 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("iomap failed for hif_cont_block\n"); pr_err 331 arch/arm/mach-bcm/platsmp-brcmstb.c pr_err("can't find compatible node %s\n", name); pr_err 51 arch/arm/mach-bcm/platsmp.c pr_err("no configuration base address register!\n"); pr_err 58 arch/arm/mach-bcm/platsmp.c pr_err("hardware reports only one core\n"); pr_err 64 arch/arm/mach-bcm/platsmp.c pr_err("failed to remap config base (%lu/%u) for SCU\n", pr_err 82 arch/arm/mach-bcm/platsmp.c pr_err("Failed to find device tree node for CPU%u\n", cpu); pr_err 89 arch/arm/mach-bcm/platsmp.c pr_err("required secondary boot register not specified for CPU%u\n", pr_err 168 arch/arm/mach-bcm/platsmp.c pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK); pr_err 178 arch/arm/mach-bcm/platsmp.c pr_err("unable to map boot register for cpu %u\n", cpu_id); pr_err 206 arch/arm/mach-bcm/platsmp.c pr_err("timeout waiting for cpu %u to start\n", cpu_id); pr_err 234 arch/arm/mach-bcm/platsmp.c pr_err("unable to find cdc node\n"); pr_err 242 arch/arm/mach-bcm/platsmp.c pr_err("unable to remap cdc base register\n"); pr_err 272 arch/arm/mach-bcm/platsmp.c pr_err("unable to write startup addr to SKU ROM LUT\n"); pr_err 292 arch/arm/mach-bcm/platsmp.c pr_err("unable to find intc node\n"); pr_err 300 arch/arm/mach-bcm/platsmp.c pr_err("unable to remap intc base register\n"); pr_err 698 arch/arm/mach-davinci/board-dm365-evm.c pr_err("ERROR: can't map CPLD\n"); pr_err 36 arch/arm/mach-davinci/common.c pr_err("Unable to map JTAG ID register\n"); pr_err 56 arch/arm/mach-davinci/common.c pr_err("Unknown DaVinci JTAG ID 0x%x\n", soc_info->jtag_id); pr_err 741 arch/arm/mach-davinci/da830.c pr_err("Unable to get the timer clock\n"); pr_err 664 arch/arm/mach-davinci/da850.c pr_err("Unable to get the timer clock\n"); pr_err 891 arch/arm/mach-davinci/devices-da8xx.c pr_err("%s: 'rproc_mem=nn@address' badly specified\n" pr_err 903 arch/arm/mach-davinci/devices-da8xx.c pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret); pr_err 928 arch/arm/mach-davinci/devices-da8xx.c pr_err("%s: can't register DSP device: %d\n", __func__, ret); pr_err 748 arch/arm/mach-davinci/dm355.c pr_err("Unable to get the timer clock\n"); pr_err 788 arch/arm/mach-davinci/dm365.c pr_err("Unable to get the timer clock\n"); pr_err 684 arch/arm/mach-davinci/dm644x.c pr_err("Unable to get the timer clock\n"); pr_err 668 arch/arm/mach-davinci/dm646x.c pr_err("Unable to get the timer clock\n"); pr_err 52 arch/arm/mach-davinci/mux.c pr_err("Invalid pin mux index: %lu (%lu)\n", pr_err 61 arch/arm/mach-davinci/mux.c pr_err("No entry for the specified index\n"); pr_err 152 arch/arm/mach-davinci/pm.c pr_err("PM: cannot allocate SRAM memory\n"); pr_err 70 arch/arm/mach-davinci/serial.c pr_err("%s:%d: failed to get UART%d clock\n", pr_err 85 arch/arm/mach-davinci/serial.c pr_err("uart regs ioremap failed\n"); pr_err 385 arch/arm/mach-davinci/time.c pr_err("%s: can't register clocksource!\n", pr_err 132 arch/arm/mach-dove/mpp.c pr_err("dove: invalid MPP GRP number (%u)\n", num); pr_err 227 arch/arm/mach-ep93xx/ts72xx.c pr_err("Failed to enable SD card power!"); pr_err 201 arch/arm/mach-exynos/firmware.c pr_err("%s: No address specified.\n", __func__); pr_err 92 arch/arm/mach-exynos/mcpm-exynos.c pr_err("cpu %u cluster %u powerup failed\n", pr_err 257 arch/arm/mach-exynos/mcpm-exynos.c pr_err("failed to map non-secure iRAM base address\n"); pr_err 228 arch/arm/mach-exynos/platsmp.c pr_err("cpu core %u restart failed\n", core_id); pr_err 195 arch/arm/mach-exynos/suspend.c pr_err("%pOF: no parent, giving up\n", node); pr_err 201 arch/arm/mach-exynos/suspend.c pr_err("%pOF: unable to obtain parent domain\n", node); pr_err 208 arch/arm/mach-exynos/suspend.c pr_err("%pOF: failed to find exynos pmu register\n", node); pr_err 536 arch/arm/mach-exynos/suspend.c pr_err("%s: No wake-up sources!\n", __func__); pr_err 537 arch/arm/mach-exynos/suspend.c pr_err("%s: Aborting sleep\n", __func__); pr_err 576 arch/arm/mach-exynos/suspend.c pr_err("Failed to prepare regulators for suspend (%d)\n", ret); pr_err 666 arch/arm/mach-exynos/suspend.c pr_err("Failed to find PMU node\n"); pr_err 169 arch/arm/mach-hisi/platmcpm.c pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu); pr_err 257 arch/arm/mach-hisi/platmcpm.c pr_err("%s: boot CPU is out of bound!\n", __func__); pr_err 294 arch/arm/mach-hisi/platmcpm.c pr_err("failed to map relocation space\n"); pr_err 300 arch/arm/mach-hisi/platmcpm.c pr_err("failed to get sysctrl base\n"); pr_err 306 arch/arm/mach-hisi/platmcpm.c pr_err("failed to get fabric base phys\n"); pr_err 313 arch/arm/mach-hisi/platmcpm.c pr_err("failed to get fabric base\n"); pr_err 48 arch/arm/mach-hisi/platsmp.c pr_err("ioremap(scu_base) failed\n"); pr_err 65 arch/arm/mach-hisi/platsmp.c pr_err("failed to find hisilicon,sysctrl node\n"); pr_err 70 arch/arm/mach-hisi/platsmp.c pr_err("failed to map address\n"); pr_err 74 arch/arm/mach-hisi/platsmp.c pr_err("failed to find smp-offset property\n"); pr_err 175 arch/arm/mach-imx/anatop.c pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); pr_err 235 arch/arm/mach-imx/gpc.c pr_err("%pOF: no parent, giving up\n", node); pr_err 241 arch/arm/mach-imx/gpc.c pr_err("%pOF: unable to obtain parent domain\n", node); pr_err 149 arch/arm/mach-imx/mach-armadillo5x0.c pr_err("Failed to request the usb otg reset gpio\n"); pr_err 155 arch/arm/mach-imx/mach-armadillo5x0.c pr_err("Failed to reset the usb otg phy\n"); pr_err 195 arch/arm/mach-imx/mach-armadillo5x0.c pr_err("Failed to request the usb host 2 CS gpio\n"); pr_err 201 arch/arm/mach-imx/mach-armadillo5x0.c pr_err("Failed to drive the usb host 2 CS gpio\n"); pr_err 208 arch/arm/mach-imx/mach-armadillo5x0.c pr_err("Failed to request the usb host 2 reset gpio\n"); pr_err 214 arch/arm/mach-imx/mach-armadillo5x0.c pr_err("Failed to reset the usb host 2 phy\n"); pr_err 473 arch/arm/mach-imx/mach-imx27_visstrim_m10.c pr_err("Failed to declare memory for emmaprp\n"); pr_err 493 arch/arm/mach-imx/mach-imx27_visstrim_m10.c pr_err("Failed to request version gpios"); pr_err 522 arch/arm/mach-imx/mach-imx27_visstrim_m10.c pr_err("Failed to setup pins (%d)\n", ret); pr_err 546 arch/arm/mach-imx/mach-imx27_visstrim_m10.c pr_err("Failed to request gpios (%d)\n", ret); pr_err 58 arch/arm/mach-imx/mach-imx51.c pr_err("Unable to map M4IF registers\n"); pr_err 217 arch/arm/mach-imx/mach-imx6q.c pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); pr_err 31 arch/arm/mach-imx/mach-imx6sl.c pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n"); pr_err 54 arch/arm/mach-imx/mach-imx6sx.c pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n"); pr_err 27 arch/arm/mach-imx/mach-imx6ul.c pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); pr_err 69 arch/arm/mach-imx/mach-imx7d.c pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n"); pr_err 435 arch/arm/mach-imx/mach-mx31_3ds.c pr_err("Failed to request the USB OTG reset gpio\n"); pr_err 441 arch/arm/mach-imx/mach-mx31_3ds.c pr_err("Failed to drive the USB OTG reset gpio\n"); pr_err 478 arch/arm/mach-imx/mach-mx31_3ds.c pr_err("Failed to request the USB Host 2 reset gpio\n"); pr_err 484 arch/arm/mach-imx/mach-mx31_3ds.c pr_err("Failed to drive the USB Host 2 reset gpio\n"); pr_err 102 arch/arm/mach-imx/mach-mx35_3ds.c pr_err("error: gpio already requested!\n"); pr_err 106 arch/arm/mach-imx/mach-mx35_3ds.c pr_err("error: didn't find mc9s08dz60 gpio chip\n"); pr_err 391 arch/arm/mach-imx/mach-mx35_3ds.c pr_err("failed to get pmic irq: %d\n", ret); pr_err 96 arch/arm/mach-imx/mm-imx3.c pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); pr_err 480 arch/arm/mach-imx/mmdc.c pr_err("failed to allocate PMU device!\n"); pr_err 490 arch/arm/mach-imx/mmdc.c pr_err("cpuhp_setup_state_multi failed\n"); pr_err 56 arch/arm/mach-imx/system.c pr_err("%s: Watchdog reset failed to assert reset\n", __func__); pr_err 138 arch/arm/mach-integrator/integrator_ap.c pr_err("MODEM: unable to write PL010 UART CTRLS\n"); pr_err 144 arch/arm/mach-integrator/integrator_ap.c pr_err("MODEM: unable to write PL010 UART CRTLC\n"); pr_err 198 arch/arm/mach-iop32x/em7210.c pr_err("could not request power off GPIO\n"); pr_err 325 arch/arm/mach-iop32x/n2100.c pr_err("could not request reset GPIO\n"); pr_err 329 arch/arm/mach-iop32x/n2100.c pr_err("could not request power GPIO\n"); pr_err 333 arch/arm/mach-iop32x/n2100.c pr_err("could not set power GPIO as input\n"); pr_err 34 arch/arm/mach-keystone/platsmp.c pr_err("CPU %d bringup failed with %d\n", cpu, error); pr_err 99 arch/arm/mach-mediatek/platsmp.c pr_err("%s: Device is not supported\n", __func__); pr_err 109 arch/arm/mach-mediatek/platsmp.c pr_err("%s: Can't remap %lx\n", __func__, pr_err 69 arch/arm/mach-meson/platsmp.c pr_err("Missing SRAM node\n"); pr_err 75 arch/arm/mach-meson/platsmp.c pr_err("Couldn't map SRAM registers\n"); pr_err 82 arch/arm/mach-meson/platsmp.c pr_err("Couldn't map PMU registers\n"); pr_err 89 arch/arm/mach-meson/platsmp.c pr_err("Missing SCU node\n"); pr_err 95 arch/arm/mach-meson/platsmp.c pr_err("Couldn't map SCU registers\n"); pr_err 139 arch/arm/mach-meson/platsmp.c pr_err("Timeout while waiting for CPU%d status\n", pr_err 161 arch/arm/mach-meson/platsmp.c pr_err("Couldn't get the reset controller for CPU%d\n", cpu); pr_err 170 arch/arm/mach-meson/platsmp.c pr_err("Failed to assert CPU%d reset\n", cpu); pr_err 178 arch/arm/mach-meson/platsmp.c pr_err("Couldn't wake up CPU%d\n", cpu); pr_err 188 arch/arm/mach-meson/platsmp.c pr_err("Error when disabling isolation of CPU%d\n", cpu); pr_err 195 arch/arm/mach-meson/platsmp.c pr_err("Failed to de-assert CPU%d reset\n", cpu); pr_err 218 arch/arm/mach-meson/platsmp.c pr_err("Couldn't get the reset controller for CPU%d\n", cpu); pr_err 228 arch/arm/mach-meson/platsmp.c pr_err("Couldn't power up CPU%d\n", cpu); pr_err 237 arch/arm/mach-meson/platsmp.c pr_err("Failed to assert CPU%d reset\n", cpu); pr_err 245 arch/arm/mach-meson/platsmp.c pr_err("Couldn't power up the memory for CPU%d\n", cpu); pr_err 253 arch/arm/mach-meson/platsmp.c pr_err("Couldn't wake up CPU%d\n", cpu); pr_err 263 arch/arm/mach-meson/platsmp.c pr_err("Timeout while polling PMU for CPU%d status\n", cpu); pr_err 271 arch/arm/mach-meson/platsmp.c pr_err("Error when disabling isolation of CPU%d\n", cpu); pr_err 278 arch/arm/mach-meson/platsmp.c pr_err("Failed to de-assert CPU%d reset\n", cpu); pr_err 324 arch/arm/mach-meson/platsmp.c pr_err("Error while waiting for SCU power-off on CPU%d\n", pr_err 335 arch/arm/mach-meson/platsmp.c pr_err("Error when enabling isolation for CPU%d\n", cpu); pr_err 345 arch/arm/mach-meson/platsmp.c pr_err("Couldn't change sleep status of CPU%d\n", cpu); pr_err 366 arch/arm/mach-meson/platsmp.c pr_err("Error while waiting for SCU power-off on CPU%d\n", pr_err 377 arch/arm/mach-meson/platsmp.c pr_err("Couldn't power down CPU%d\n", cpu); pr_err 385 arch/arm/mach-meson/platsmp.c pr_err("Error when enabling isolation for CPU%d\n", cpu); pr_err 395 arch/arm/mach-meson/platsmp.c pr_err("Couldn't change sleep status of CPU%d\n", cpu); pr_err 403 arch/arm/mach-meson/platsmp.c pr_err("Couldn't power down the memory of CPU%d\n", cpu); pr_err 242 arch/arm/mach-mmp/time.c pr_err("Failed to get timer from device tree with error:%d\n", ret); pr_err 222 arch/arm/mach-mmp/ttc_dkb.c pr_err("failed to request GPIO for TPO LCD RESET\n"); pr_err 232 arch/arm/mach-mmp/ttc_dkb.c pr_err("failed to request LCD RESET gpio\n"); pr_err 49 arch/arm/mach-mvebu/cpu-reset.c pr_err("unable to get resource\n"); pr_err 55 arch/arm/mach-mvebu/cpu-reset.c pr_err("unable to request region\n"); pr_err 61 arch/arm/mach-mvebu/cpu-reset.c pr_err("unable to map registers\n"); pr_err 76 arch/arm/mach-mvebu/mvebu-soc-id.c pr_err("cannot get pci node\n"); pr_err 83 arch/arm/mach-mvebu/mvebu-soc-id.c pr_err("cannot get clock\n"); pr_err 90 arch/arm/mach-mvebu/mvebu-soc-id.c pr_err("cannot enable clock\n"); pr_err 96 arch/arm/mach-mvebu/mvebu-soc-id.c pr_err("cannot map registers\n"); pr_err 55 arch/arm/mach-mvebu/platsmp-a9.c pr_err("Could not start the secondary CPU: %d\n", ret); pr_err 141 arch/arm/mach-mvebu/pmsu.c pr_err("Unable to map SRAM to setup the boot address WA\n"); pr_err 174 arch/arm/mach-mvebu/pmsu.c pr_err("unable to get resource\n"); pr_err 187 arch/arm/mach-mvebu/pmsu.c pr_err("unable to request region\n"); pr_err 196 arch/arm/mach-mvebu/pmsu.c pr_err("unable to map registers\n"); pr_err 97 arch/arm/mach-mvebu/system-controller.c pr_err("Cannot restart, system-controller not available: check the device tree\n"); pr_err 146 arch/arm/mach-mxs/mach-mxs.c pr_err("%s: timeout in reading OCOTP\n", __func__); pr_err 438 arch/arm/mach-mxs/mach-mxs.c pr_err("Failed to assert the chip reset\n"); pr_err 33 arch/arm/mach-npcm/platsmp.c pr_err("no gcr device node\n"); pr_err 39 arch/arm/mach-npcm/platsmp.c pr_err("could not iomap gcr"); pr_err 62 arch/arm/mach-npcm/platsmp.c pr_err("no scu device node\n"); pr_err 67 arch/arm/mach-npcm/platsmp.c pr_err("could not iomap scu"); pr_err 95 arch/arm/mach-omap1/ams-delta-fiq.c pr_err("%s: GPIO chip %s is missing IRQ function\n", __func__, pr_err 104 arch/arm/mach-omap1/ams-delta-fiq.c pr_err("%s: failed to get GPIO pin %d (%ld)\n", pr_err 140 arch/arm/mach-omap1/ams-delta-fiq.c pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", pr_err 148 arch/arm/mach-omap1/ams-delta-fiq.c pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); pr_err 615 arch/arm/mach-omap1/board-ams-delta.c pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__, pr_err 637 arch/arm/mach-omap1/board-ams-delta.c pr_err("%s: OMAP GPIO chip not found\n", __func__); pr_err 819 arch/arm/mach-omap1/board-ams-delta.c pr_err("Couldn't register the modem regulator device\n"); pr_err 463 arch/arm/mach-omap1/board-htcherald.c pr_err("Timeout waiting for end of frame -- LCD may not be available\n"); pr_err 635 arch/arm/mach-omap1/clock.c pr_err("Trying disable clock %s with 0 usecount\n", pr_err 911 arch/arm/mach-omap1/clock_data.c pr_err("System frequencies not set, using default. Check your config.\n"); pr_err 319 arch/arm/mach-omap1/dma.c pr_err("%s: Unable to device alloc for dma\n", pr_err 326 arch/arm/mach-omap1/dma.c pr_err("%s: Unable to ioremap\n", __func__); pr_err 181 arch/arm/mach-omap1/fpga.c pr_err("%s failed to get gpio\n", __func__); pr_err 112 arch/arm/mach-omap1/lcd_dma.c pr_err("DMA virtual resolution is not supported in 1510 mode\n"); pr_err 435 arch/arm/mach-omap1/lcd_dma.c pr_err("unable to request IRQ for LCD DMA (error %d)\n", r); pr_err 90 arch/arm/mach-omap1/pm.c pr_err("idle_sleep_store: Invalid value\n"); pr_err 46 arch/arm/mach-omap1/sram-init.c pr_err("Could not detect SRAM size\n"); pr_err 220 arch/arm/mach-omap1/time.c pr_err("Bogus timer, should not happen\n"); pr_err 115 arch/arm/mach-omap1/timer.c pr_err("%s: Failed to device alloc for dmtimer%d\n", pr_err 181 arch/arm/mach-omap1/timer32k.c pr_err("32k_counter: failed to map base addr\n"); pr_err 61 arch/arm/mach-omap2/board-n8x0.c pr_err("Unknown board\n"); pr_err 527 arch/arm/mach-omap2/board-n8x0.c pr_err("Could not set regulators to sleep on menelaus: %u\n", pr_err 540 arch/arm/mach-omap2/board-n8x0.c pr_err("Could not set VCORE voltage on menelaus: %u\n", ret); pr_err 82 arch/arm/mach-omap2/clockdomain.c pr_err("clockdomain: %s: powerdomain %s does not exist\n", pr_err 149 arch/arm/mach-omap2/clockdomain.c pr_err("clockdomain: autodeps: clockdomain %s does not exist\n", pr_err 250 arch/arm/mach-omap2/control.c pr_err("%s: unsupported omap type\n", __func__); pr_err 271 arch/arm/mach-omap2/control.c pr_err("%s: unsupported omap type\n", __func__); pr_err 177 arch/arm/mach-omap2/display.c pr_err("DSS not supported on this SoC\n"); pr_err 185 arch/arm/mach-omap2/display.c pr_err("Unable to register omapdss device\n"); pr_err 192 arch/arm/mach-omap2/display.c pr_err("Unable to register omapvrfb device\n"); pr_err 199 arch/arm/mach-omap2/display.c pr_err("Unable to register omapfb device\n"); pr_err 206 arch/arm/mach-omap2/display.c pr_err("Unable to register omap_vout device\n"); pr_err 261 arch/arm/mach-omap2/display.c pr_err("Unable to find DSS platform device\n"); pr_err 267 arch/arm/mach-omap2/display.c pr_err("Unable to populate DSS submodule devices\n"); pr_err 292 arch/arm/mach-omap2/display.c pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); pr_err 369 arch/arm/mach-omap2/display.c pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); pr_err 383 arch/arm/mach-omap2/display.c pr_err("dss_core: hwmod data doesn't contain reset data\n"); pr_err 250 arch/arm/mach-omap2/dma.c pr_err("%s: Can't build omap_device for %s:%s.\n", pr_err 64 arch/arm/mach-omap2/hsmmc.c pr_err("Could not late init MMC\n"); pr_err 99 arch/arm/mach-omap2/hsmmc.c pr_err("Could not look up %s\n", oh_name); pr_err 110 arch/arm/mach-omap2/hsmmc.c pr_err("Could not allocate pdev for %s\n", name); pr_err 117 arch/arm/mach-omap2/hsmmc.c pr_err("Could not allocate od for %s\n", name); pr_err 124 arch/arm/mach-omap2/hsmmc.c pr_err("Could not add pdata for %s\n", name); pr_err 132 arch/arm/mach-omap2/hsmmc.c pr_err("Could not register od for %s\n", name); pr_err 73 arch/arm/mach-omap2/id.c pr_err("Cannot detect omap type!\n"); pr_err 189 arch/arm/mach-omap2/id.c pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n", pr_err 397 arch/arm/mach-omap2/io.c pr_err("dpll3_m2_clk rate change failed: %d\n", v); pr_err 37 arch/arm/mach-omap2/omap-hotplug.c pr_err("Secure clear status failed\n"); pr_err 381 arch/arm/mach-omap2/omap-mpuss-lowpower.c pr_err("Lookup failed for CPU0 pwrdm\n"); pr_err 406 arch/arm/mach-omap2/omap-mpuss-lowpower.c pr_err("Lookup failed for CPU1 pwrdm\n"); pr_err 419 arch/arm/mach-omap2/omap-mpuss-lowpower.c pr_err("Failed to lookup MPUSS power domain\n"); pr_err 367 arch/arm/mach-omap2/omap-smp.c pr_err("%s Unknown SMP SoC?\n", __func__); pr_err 381 arch/arm/mach-omap2/omap-wakeupgen.c pr_err("GIC and Wakeupgen context save failed\n"); pr_err 554 arch/arm/mach-omap2/omap-wakeupgen.c pr_err("%pOF: no parent, giving up\n", node); pr_err 560 arch/arm/mach-omap2/omap-wakeupgen.c pr_err("%pOF: unable to obtain parent domain\n", node); pr_err 307 arch/arm/mach-omap2/omap4-common.c pr_err("No WUGEN found in DT, system will misbehave.\n"); pr_err 308 arch/arm/mach-omap2/omap4-common.c pr_err("UPDATE YOUR DEVICE TREE!\n"); pr_err 546 arch/arm/mach-omap2/omap_device.c pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret); pr_err 1993 arch/arm/mach-omap2/omap_hwmod.c pr_err("omap_hwmod: %s: _wait_target_ready failed: %d\n", pr_err 2225 arch/arm/mach-omap2/omap_hwmod.c pr_err("%s: error mapping mpu_rt_idx: %i\n", pr_err 2279 arch/arm/mach-omap2/omap_hwmod.c pr_err("%s: invalid range for %s->%pOFn\n", __func__, pr_err 2342 arch/arm/mach-omap2/omap_hwmod.c pr_err("omap_hwmod: %s: no dt node\n", oh->name); pr_err 2355 arch/arm/mach-omap2/omap_hwmod.c pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n", pr_err 2893 arch/arm/mach-omap2/omap_hwmod.c pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", pr_err 3115 arch/arm/mach-omap2/omap_hwmod.c pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n", pr_err 43 arch/arm/mach-omap2/omap_phy_internal.c pr_err("control module ioremap failed\n"); pr_err 94 arch/arm/mach-omap2/omap_phy_internal.c pr_err("musb PHY clock good timed out\n"); pr_err 121 arch/arm/mach-omap2/omap_twl.c pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n", pr_err 121 arch/arm/mach-omap2/pdata-quirks.c pr_err("SBC-T3x: %s reset gpio request failed: %d\n", pr_err 246 arch/arm/mach-omap2/pdata-quirks.c pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err); pr_err 260 arch/arm/mach-omap2/pm24xx.c pr_err("PM: mpu_pwrdm not found\n"); pr_err 264 arch/arm/mach-omap2/pm24xx.c pr_err("PM: core_pwrdm not found\n"); pr_err 270 arch/arm/mach-omap2/pm24xx.c pr_err("PM: mpu_clkdm not found\n"); pr_err 274 arch/arm/mach-omap2/pm24xx.c pr_err("PM: wkup_clkdm not found\n"); pr_err 278 arch/arm/mach-omap2/pm24xx.c pr_err("PM: dsp_clkdm not found\n"); pr_err 282 arch/arm/mach-omap2/pm24xx.c pr_err("PM: gfx_clkdm not found\n"); pr_err 84 arch/arm/mach-omap2/pm33xx-core.c pr_err("PM: Failed to get cefuse_pwrdm\n"); pr_err 100 arch/arm/mach-omap2/pm33xx-core.c pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n"); pr_err 115 arch/arm/mach-omap2/pm33xx-core.c pr_err("PM: Could not ioremap SCU\n"); pr_err 138 arch/arm/mach-omap2/pm33xx-core.c pr_err("PM: GFX domain did not transition: %x\n", status); pr_err 125 arch/arm/mach-omap2/pm34xx.c pr_err("save_secure_sram() returns %08x\n", ret); pr_err 210 arch/arm/mach-omap2/pm34xx.c pr_err("Invalid mpu state in sram_idle\n"); pr_err 340 arch/arm/mach-omap2/pm34xx.c pr_err("Could not enter target state in pm_suspend\n"); pr_err 469 arch/arm/mach-omap2/pm34xx.c pr_err("pm: Failed to request pm_wkup irq\n"); pr_err 479 arch/arm/mach-omap2/pm34xx.c pr_err("pm: Failed to request pm_io irq\n"); pr_err 485 arch/arm/mach-omap2/pm34xx.c pr_err("Failed to setup powerdomains\n"); pr_err 493 arch/arm/mach-omap2/pm34xx.c pr_err("Failed to get mpu_pwrdm\n"); pr_err 546 arch/arm/mach-omap2/pm34xx.c pr_err("Memory allocation failed when allocating for secure sram context\n"); pr_err 211 arch/arm/mach-omap2/pm44xx.c pr_err("Failed lookup %s or %s for wakeup dependency\n", pr_err 217 arch/arm/mach-omap2/pm44xx.c pr_err("Failed to add %s -> %s wakeup dependency(%d)\n", pr_err 273 arch/arm/mach-omap2/pm44xx.c pr_err("Failed to setup powerdomains.\n"); pr_err 283 arch/arm/mach-omap2/pm44xx.c pr_err("Failed to initialise static dependencies.\n"); pr_err 289 arch/arm/mach-omap2/pm44xx.c pr_err("Failed to initialise OMAP4 MPUSS\n"); pr_err 99 arch/arm/mach-omap2/powerdomain.c pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n", pr_err 113 arch/arm/mach-omap2/powerdomain.c pr_err("powerdomain: %s: voltagedomain %s does not exist\n", pr_err 1140 arch/arm/mach-omap2/powerdomain.c pr_err("%s: unable to set power state of powerdomain: %s\n", pr_err 556 arch/arm/mach-omap2/powerdomains3xxx_data.c pr_err("powerdomain: %s timeout waiting for transition\n", pr_err 185 arch/arm/mach-omap2/prm2xxx_3xxx.c pr_err("powerdomain: %s: waited too long to complete transition\n", pr_err 312 arch/arm/mach-omap2/prm33xx.c pr_err("powerdomain: %s: waited too long to complete transition\n", pr_err 705 arch/arm/mach-omap2/prm3xxx.c pr_err("PRM: no device tree node for interrupt?\n"); pr_err 658 arch/arm/mach-omap2/prm44xx.c pr_err("powerdomain: %s: waited too long to complete transition\n", pr_err 196 arch/arm/mach-omap2/prm_common.c pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n"); pr_err 273 arch/arm/mach-omap2/prm_common.c pr_err("PRCM: already initialized; won't reinitialize\n"); pr_err 278 arch/arm/mach-omap2/prm_common.c pr_err("PRCM: nr_regs too large\n"); pr_err 311 arch/arm/mach-omap2/prm_common.c pr_err("PRCM: failed to allocate irq descs: %d\n", pr_err 322 arch/arm/mach-omap2/prm_common.c pr_err("PRCM: failed to allocate generic chip\n"); pr_err 107 arch/arm/mach-omap2/sr_device.c pr_err("%s: Unknown instance %s\n", __func__, oh->name); pr_err 113 arch/arm/mach-omap2/sr_device.c pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", pr_err 141 arch/arm/mach-omap2/sr_device.c pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", pr_err 148 arch/arm/mach-omap2/sr_device.c pr_err("%s: No Voltage table registered for VDD%d\n", pr_err 532 arch/arm/mach-omap2/timer.c pr_err("Could not register clocksource %s\n", pr_err 621 arch/arm/mach-omap2/timer.c pr_err("%s: ioremap failed\n", __func__); pr_err 626 arch/arm/mach-omap2/timer.c pr_err("%s: failed to get system clock handle\n", __func__); pr_err 122 arch/arm/mach-omap2/vc.c pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", pr_err 128 arch/arm/mach-omap2/vc.c pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n", pr_err 134 arch/arm/mach-omap2/vc.c pr_err("%s: No read/write API for accessing vdd_%s regs\n", pr_err 775 arch/arm/mach-omap2/vc.c pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); pr_err 780 arch/arm/mach-omap2/vc.c pr_err("%s: No read/write API for accessing vdd_%s regs\n", pr_err 82 arch/arm/mach-omap2/voltage.c pr_err("%s: No voltage scale API registered for vdd_%s\n", pr_err 88 arch/arm/mach-omap2/voltage.c pr_err("%s: No voltage data defined for vdd_%s\n", pr_err 134 arch/arm/mach-omap2/voltage.c pr_err("%s: unable to find current voltage for vdd_%s\n", pr_err 241 arch/arm/mach-omap2/voltage.c pr_err("%s: Voltage driver support not added\n", pr_err 46 arch/arm/mach-omap2/vp.c pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); pr_err 51 arch/arm/mach-omap2/vp.c pr_err("%s: No read/write API for accessing vdd_%s regs\n", pr_err 163 arch/arm/mach-omap2/vp.c pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n", pr_err 209 arch/arm/mach-omap2/vp.c pr_err("%s: No read/write API for accessing vdd_%s regs\n", pr_err 254 arch/arm/mach-omap2/vp.c pr_err("%s: No read/write API for accessing vdd_%s regs\n", pr_err 36 arch/arm/mach-omap2/wd_timer.c pr_err("%s: Could not look up wdtimer_hwmod\n", __func__); pr_err 42 arch/arm/mach-omap2/wd_timer.c pr_err("%s: Could not get the base address for %s\n", pr_err 95 arch/arm/mach-orion5x/board-d2net.c pr_err("d2net: failed to configure blue LED blink GPIO\n"); pr_err 669 arch/arm/mach-orion5x/dns323-setup.c pr_err("DNS-323: failed to setup power-off GPIO\n"); pr_err 686 arch/arm/mach-orion5x/dns323-setup.c pr_err("DNS-323: failed to setup power-off GPIO\n"); pr_err 696 arch/arm/mach-orion5x/dns323-setup.c pr_err("DNS-323: failed to setup power-off GPIO\n"); pr_err 227 arch/arm/mach-orion5x/mv2120-setup.c pr_err("mv2120: failed to setup power-off GPIO\n"); pr_err 135 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to setup SATA0 power GPIO\n"); pr_err 146 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to setup SATA1 power GPIO\n"); pr_err 157 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to setup SATA power request GPIO\n"); pr_err 262 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to setup power LED blink GPIO\n"); pr_err 276 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to setup SATA0 blue LED GPIO\n"); pr_err 286 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to setup SATA1 blue LED GPIO\n"); pr_err 418 arch/arm/mach-orion5x/net2big-setup.c pr_err("net2big: failed to configure power-off GPIO\n"); pr_err 445 arch/arm/mach-orion5x/ts78xx-setup.c pr_err("FPGA magic/rev mismatch\n" pr_err 476 arch/arm/mach-orion5x/ts78xx-setup.c pr_err("FPGA borked, you must powercycle ASAP\n"); pr_err 565 arch/arm/mach-orion5x/ts78xx-setup.c pr_err("sysfs_create_file failed: %d\n", ret); pr_err 101 arch/arm/mach-prima2/pm.c pr_err("unable to find compatible sirf pwrc node in dtb\n"); pr_err 252 arch/arm/mach-pxa/balloon3.c pr_err("Requesting BKL-ON GPIO failed!\n"); pr_err 258 arch/arm/mach-pxa/balloon3.c pr_err("Setting BKL-ON GPIO direction failed!\n"); pr_err 513 arch/arm/mach-pxa/cm-x300.c pr_err("failed to request ULPI reset GPIO: %d\n", err); pr_err 535 arch/arm/mach-pxa/cm-x300.c pr_err("failed to get CLK_POUT: %d\n", err); pr_err 807 arch/arm/mach-pxa/cm-x300.c pr_err("failed to request wifi/bt gpios: %d\n", err); pr_err 486 arch/arm/mach-pxa/devices.c pr_err("PXA AC97 clock1 alias error: %d\n", ret); pr_err 491 arch/arm/mach-pxa/devices.c pr_err("PXA AC97 clock2 alias error: %d\n", ret); pr_err 507 arch/arm/mach-pxa/em-x270.c pr_err("USB Hub initialization failed: %d\n", err); pr_err 780 arch/arm/mach-pxa/ezx.c pr_err("%s: Failed to request CAM_RST\n", __func__); pr_err 1031 arch/arm/mach-pxa/ezx.c pr_err("%s: Failed to request CAM_RST\n", __func__); pr_err 148 arch/arm/mach-pxa/gumstix.c pr_err("Failed to start 32kHz clock\n"); pr_err 159 arch/arm/mach-pxa/gumstix.c pr_err("gumstix: failed request gpio for bluetooth reset\n"); pr_err 165 arch/arm/mach-pxa/gumstix.c pr_err("gumstix: can't reset bluetooth\n"); pr_err 879 arch/arm/mach-pxa/hx4700.c pr_err ("hx4700: Failed to request GPIOs.\n"); pr_err 241 arch/arm/mach-pxa/irq.c pr_err("Failed to find interrupt controller in arch-pxa\n"); pr_err 248 arch/arm/mach-pxa/irq.c pr_err("Not found marvell,intc-nr-irqs property\n"); pr_err 254 arch/arm/mach-pxa/irq.c pr_err("No registers defined for node\n"); pr_err 264 arch/arm/mach-pxa/irq.c pr_err("Failed to allocate IRQ numbers\n"); pr_err 487 arch/arm/mach-pxa/lubbock.c pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n", pr_err 534 arch/arm/mach-pxa/magician.c pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret); pr_err 540 arch/arm/mach-pxa/magician.c pr_err("Cannot request cable detection GPIO (%i)\n", ret); pr_err 829 arch/arm/mach-pxa/magician.c pr_err("Cannot request flash enable GPIO (%i)\n", ret); pr_err 835 arch/arm/mach-pxa/magician.c pr_err("Cannot set direction for flash enable (%i)\n", ret); pr_err 991 arch/arm/mach-pxa/magician.c pr_err("magician: Failed to request global GPIOs: %d\n", err); pr_err 1026 arch/arm/mach-pxa/magician.c pr_err("LCD detection: CPLD mapping failed\n"); pr_err 743 arch/arm/mach-pxa/mioa701.c pr_err("MioA701: Failed to request GPIOs: %d", rc); pr_err 142 arch/arm/mach-pxa/palm27x.c pr_err("Palm27x: failed to claim lcd power gpio!\n"); pr_err 146 arch/arm/mach-pxa/palm27x.c pr_err("Palm27x: lcd power configuration failed!\n"); pr_err 473 arch/arm/mach-pxa/palmtreo.c pr_err("gpio %d initialization failed\n", gpio); pr_err 533 arch/arm/mach-pxa/pcm990-baseboard.c pr_err("pcm990: failed to ioremap cpld\n"); pr_err 141 arch/arm/mach-pxa/pxa3xx-ulpi.c pr_err("OTG transceiver init failed"); pr_err 147 arch/arm/mach-pxa/pxa3xx-ulpi.c pr_err("OTG transceiver VBUS set failed"); pr_err 153 arch/arm/mach-pxa/pxa3xx-ulpi.c pr_err("OTG transceiver Host mode set failed"); pr_err 415 arch/arm/mach-pxa/saar.c pr_err("failed to request gpio for LCD reset\n"); pr_err 436 arch/arm/mach-pxa/saar.c pr_err("%s: timed out\n", __func__); pr_err 437 arch/arm/mach-pxa/tavorevb.c pr_err("%s: timed out\n", __func__); pr_err 835 arch/arm/mach-pxa/viper.c pr_err("viper: Couldn't %s, giving up\n", errstr); pr_err 866 arch/arm/mach-pxa/viper.c pr_err("viper: Failed to setup vcore control GPIOs\n"); pr_err 882 arch/arm/mach-pxa/viper.c pr_err("viper: Failed to setup UART shutdown GPIO\n"); pr_err 924 arch/arm/mach-pxa/viper.c pr_err("viper: Failed to setup cpufreq notifier\n"); pr_err 571 arch/arm/mach-pxa/vpac270.c pr_err("Requesting BKL-ON GPIO failed!\n"); pr_err 577 arch/arm/mach-pxa/vpac270.c pr_err("Setting BKL-ON GPIO direction failed!\n"); pr_err 886 arch/arm/mach-pxa/zeus.c pr_err("Failed to setup fb gpios\n"); pr_err 60 arch/arm/mach-qcom/platsmp.c pr_err("%s: can't find node\n", __func__); pr_err 45 arch/arm/mach-realview/platsmp-dt.c pr_err("PLATSMP: No SCU base address\n"); pr_err 51 arch/arm/mach-realview/platsmp-dt.c pr_err("PLATSMP: No SCU remap\n"); pr_err 65 arch/arm/mach-realview/platsmp-dt.c pr_err("PLATSMP: No syscon match\n"); pr_err 70 arch/arm/mach-realview/platsmp-dt.c pr_err("PLATSMP: No syscon regmap\n"); pr_err 71 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not get reset control for core %d\n", pr_err 87 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not update power domain\n", pr_err 96 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not read power domain state\n", pr_err 121 arch/arm/mach-rockchip/platsmp.c pr_err("%s: sram or pmu missing for cpu boot\n", __func__); pr_err 126 arch/arm/mach-rockchip/platsmp.c pr_err("%s: cpu %d outside maximum number of cpus %d\n", pr_err 176 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not get address for node %pOF\n", pr_err 183 arch/arm/mach-rockchip/platsmp.c pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n", pr_err 234 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not find pmu dt node\n", __func__); pr_err 241 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not map pmu registers\n", __func__); pr_err 251 arch/arm/mach-rockchip/platsmp.c pr_err("%s: regmap init failed\n", __func__); pr_err 265 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not find sram dt node\n", __func__); pr_err 271 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not map sram registers\n", __func__); pr_err 293 arch/arm/mach-rockchip/platsmp.c pr_err("%s: missing scu\n", __func__); pr_err 299 arch/arm/mach-rockchip/platsmp.c pr_err("%s: could not map scu registers\n", __func__); pr_err 310 arch/arm/mach-rockchip/platsmp.c pr_err("%s: ncores %d\n", __func__, ncores); pr_err 193 arch/arm/mach-rockchip/pm.c pr_err("%s: Failed to suspend\n", __func__); pr_err 221 arch/arm/mach-rockchip/pm.c pr_err("%s: Suspend finish failed\n", __func__); pr_err 232 arch/arm/mach-rockchip/pm.c pr_err("%s: could not find pmu regmap\n", __func__); pr_err 239 arch/arm/mach-rockchip/pm.c pr_err("%s: could not find sgrf regmap\n", __func__); pr_err 246 arch/arm/mach-rockchip/pm.c pr_err("%s: could not find grf regmap\n", __func__); pr_err 253 arch/arm/mach-rockchip/pm.c pr_err("%s: could not find bootram dt node\n", __func__); pr_err 259 arch/arm/mach-rockchip/pm.c pr_err("%s: could not map bootram base\n", __func__); pr_err 266 arch/arm/mach-rockchip/pm.c pr_err("%s: could not get bootram phy addr\n", __func__); pr_err 313 arch/arm/mach-rockchip/pm.c pr_err("Failed to find PMU node\n"); pr_err 322 arch/arm/mach-rockchip/pm.c pr_err("%s: matches init error %d\n", __func__, ret); pr_err 45 arch/arm/mach-rockchip/rockchip.c pr_err("rockchip: could not map timer7 registers\n"); pr_err 45 arch/arm/mach-s3c24xx/setup-camif.c pr_err("failed to configure GPIO %d\n", gpio); pr_err 108 arch/arm/mach-s3c24xx/simtec-usb.c pr_err("%s: failed to get GPB4\n", __func__); pr_err 114 arch/arm/mach-s3c24xx/simtec-usb.c pr_err("%s: failed to get GPG10\n", __func__); pr_err 109 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("failed to request usb oc irq: %d\n", ret); pr_err 298 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("%s: failed to get GPK15\n", __func__); pr_err 316 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("%s: failed to get GPL0\n", __func__); pr_err 322 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("%s: failed to get GPL1\n", __func__); pr_err 330 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("%s: failed to get GPL10\n", __func__); pr_err 358 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("%s: failed to get GPK1\n", __func__); pr_err 364 arch/arm/mach-s3c64xx/mach-smartq.c pr_err("%s: failed to get GPK2\n", __func__); pr_err 76 arch/arm/mach-s3c64xx/pm.c pr_err("Failed to start domain %s\n", pd->name); pr_err 111 arch/arm/mach-s5pv210/pm.c pr_err("%s: No wake-up sources!\n", __func__); pr_err 112 arch/arm/mach-s5pv210/pm.c pr_err("%s: Aborting sleep\n", __func__); pr_err 42 arch/arm/mach-sa1100/h3100.c pr_err("%s: can't request GPIOs\n", __func__); pr_err 44 arch/arm/mach-sa1100/h3600.c pr_err("%s: can't request GPIOs\n", __func__); pr_err 54 arch/arm/mach-sa1100/h3xxx.c pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__); pr_err 93 arch/arm/mach-sa1100/h3xxx.c pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n", pr_err 77 arch/arm/mach-shmobile/pm-rcar-gen2.c pr_err("Failed to get smp-sram address: %d\n", error); pr_err 85 arch/arm/mach-shmobile/pm-rcar-gen2.c pr_err("Invalid smp-sram region\n"); pr_err 30 arch/arm/mach-socfpga/l2_cache.c pr_err("Unable to find socfpga-l2-ecc in dtb\n"); pr_err 37 arch/arm/mach-socfpga/l2_cache.c pr_err("Unable to find L2 ECC mapping in dtb\n"); pr_err 54 arch/arm/mach-socfpga/l2_cache.c pr_err("Unable to find socfpga-a10-l2-ecc in dtb\n"); pr_err 61 arch/arm/mach-socfpga/l2_cache.c pr_err("Unable to find L2 ECC mapping in dtb\n"); pr_err 66 arch/arm/mach-socfpga/l2_cache.c pr_err("System Manager not mapped for L2 ECC\n"); pr_err 25 arch/arm/mach-socfpga/ocram.c pr_err("Unable to find socfpga-ocram-ecc\n"); pr_err 32 arch/arm/mach-socfpga/ocram.c pr_err("Unable to map OCRAM ecc regs.\n"); pr_err 122 arch/arm/mach-socfpga/ocram.c pr_err("SOCFPGA: sys-mgr is not initialized\n"); pr_err 129 arch/arm/mach-socfpga/ocram.c pr_err("Unable to find socfpga-a10-ocram-ecc\n"); pr_err 137 arch/arm/mach-socfpga/ocram.c pr_err("Unable to map OCRAM ECC block\n"); pr_err 155 arch/arm/mach-socfpga/ocram.c pr_err("ECC: cannot init OCRAM PORTA memory\n"); pr_err 76 arch/arm/mach-socfpga/platsmp.c pr_err("%s: missing scu\n", __func__); pr_err 37 arch/arm/mach-socfpga/pm.c pr_err("%s: Unable to find mmio-sram in dtb\n", __func__); pr_err 32 arch/arm/mach-socfpga/socfpga.c pr_err("SMP: Need cpu1-start-addr in device tree.\n"); pr_err 97 arch/arm/mach-spear/spear13xx.c pr_err("%s: Unknown machine\n", __func__); pr_err 110 arch/arm/mach-spear/spear13xx.c pr_err("%s:couldn't get clk for gpt\n", __func__); pr_err 117 arch/arm/mach-spear/spear13xx.c pr_err("%s:couldn't get %s as parent for gpt\n", __func__, pr_err 93 arch/arm/mach-spear/spear3xx.c pr_err("%s:couldn't get clk for gpt\n", __func__); pr_err 100 arch/arm/mach-spear/spear3xx.c pr_err("%s:couldn't get %s as parent for gpt\n", pr_err 380 arch/arm/mach-spear/spear6xx.c pr_err("%s:couldn't get clk for gpt\n", __func__); pr_err 387 arch/arm/mach-spear/spear6xx.c pr_err("%s:couldn't get %s as parent for gpt\n", pr_err 219 arch/arm/mach-spear/time.c pr_err("%s: No timer passed via DT\n", __func__); pr_err 225 arch/arm/mach-spear/time.c pr_err("%s: No irq passed for timer via DT\n", __func__); pr_err 231 arch/arm/mach-spear/time.c pr_err("%s: of iomap failed\n", __func__); pr_err 237 arch/arm/mach-spear/time.c pr_err("%s:couldn't get clk for gpt\n", __func__); pr_err 243 arch/arm/mach-spear/time.c pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); pr_err 76 arch/arm/mach-sti/platsmp.c pr_err("CPU %d: missing or invalid cpu-release-addr " pr_err 105 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: Couldn't get CPU cluster %u core %u device node\n", pr_err 463 arch/arm/mach-sunxi/mc_smp.c pr_err("Cluster %d CPU%d boots multiple times\n", pr_err 638 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: boot CPU is out of bounds!\n", __func__); pr_err 721 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: PRCM not available\n", __func__); pr_err 728 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: CPUCFG not available\n", __func__); pr_err 735 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: Secure SRAM not available\n", __func__); pr_err 747 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: PRCM not available\n", __func__); pr_err 754 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: CPUCFG not available\n", __func__); pr_err 761 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: RCPUCFG not available\n", __func__); pr_err 821 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: CCI-400 not available\n", __func__); pr_err 836 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: failed to map PRCM registers\n", __func__); pr_err 845 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: failed to map CPUCFG registers: %d\n", pr_err 855 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: failed to map R-CPUCFG registers\n", pr_err 864 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: failed to map secure SRAM\n", __func__); pr_err 872 arch/arm/mach-sunxi/mc_smp.c pr_err("%s: failed to configure boot cluster: %d\n", pr_err 48 arch/arm/mach-sunxi/platsmp.c pr_err("Missing A31 PRCM node in the device tree\n"); pr_err 55 arch/arm/mach-sunxi/platsmp.c pr_err("Couldn't map A31 PRCM registers\n"); pr_err 62 arch/arm/mach-sunxi/platsmp.c pr_err("Missing A31 CPU config node in the device tree\n"); pr_err 69 arch/arm/mach-sunxi/platsmp.c pr_err("Couldn't map A31 CPU config registers\n"); pr_err 133 arch/arm/mach-sunxi/platsmp.c pr_err("Missing A23 PRCM node in the device tree\n"); pr_err 140 arch/arm/mach-sunxi/platsmp.c pr_err("Couldn't map A23 PRCM registers\n"); pr_err 147 arch/arm/mach-sunxi/platsmp.c pr_err("Missing A23 CPU config node in the device tree\n"); pr_err 154 arch/arm/mach-sunxi/platsmp.c pr_err("Couldn't map A23 CPU config registers\n"); pr_err 417 arch/arm/mach-tegra/pm.c pr_err("%s: unable to allocate memory for SDRAM" pr_err 48 arch/arm/mach-u300/regulator.c pr_err("regulator not available to shut down system\n"); pr_err 80 arch/arm/mach-u300/regulator.c pr_err("could not get vana15"); pr_err 85 arch/arm/mach-u300/regulator.c pr_err("could not enable vana15\n"); pr_err 91 arch/arm/mach-ux500/cpu-db8500.c pr_err("could not find PRCMU base resource\n"); pr_err 40 arch/arm/mach-ux500/platsmp.c pr_err("No backupram base address\n"); pr_err 46 arch/arm/mach-ux500/platsmp.c pr_err("No backupram remap\n"); pr_err 52 arch/arm/mach-ux500/platsmp.c pr_err("No SCU base address\n"); pr_err 58 arch/arm/mach-ux500/platsmp.c pr_err("No SCU remap\n"); pr_err 184 arch/arm/mach-ux500/pm.c pr_err("could not remap PRCMU for PM functions\n"); pr_err 191 arch/arm/mach-ux500/pm.c pr_err("could not remap GIC dist base for PM functions\n"); pr_err 461 arch/arm/mach-vexpress/spc.c pr_err(SPCLOG "Invalid IRQ %d\n", irq); pr_err 473 arch/arm/mach-vexpress/spc.c pr_err(SPCLOG "IRQ %d request failed\n", irq); pr_err 562 arch/arm/mach-vexpress/spc.c pr_err("failed to build OPP table\n"); pr_err 249 arch/arm/mach-vexpress/tc2_pm.c pr_err("%s: boot CPU is out of bound!\n", __func__); pr_err 77 arch/arm/mach-vt8500/vt8500.c pr_err("%s: of_iomap(gpio_mux) failed\n", pr_err 84 arch/arm/mach-vt8500/vt8500.c pr_err("%s: ioremap(legacy_gpio_mux) failed\n", pr_err 92 arch/arm/mach-vt8500/vt8500.c pr_err("%s: Could not remap GPIO mux\n", __func__); pr_err 109 arch/arm/mach-vt8500/vt8500.c pr_err("%s: of_iomap(gpio_mux) failed\n", pr_err 116 arch/arm/mach-vt8500/vt8500.c pr_err("%s: ioremap(legacy_gpio_mux) failed\n", pr_err 124 arch/arm/mach-vt8500/vt8500.c pr_err("%s: Could not remap GPIO mux\n", __func__); pr_err 135 arch/arm/mach-vt8500/vt8500.c pr_err("%s:of_iomap(pmc) failed\n", __func__); pr_err 141 arch/arm/mach-vt8500/vt8500.c pr_err("%s:ioremap(power_off) failed\n", __func__); pr_err 146 arch/arm/mach-vt8500/vt8500.c pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__); pr_err 51 arch/arm/mach-zx/platsmp.c pr_err("%s: failed to map scu\n", __func__); pr_err 59 arch/arm/mach-zx/platsmp.c pr_err("%s: failed to find sysctrl node\n", __func__); pr_err 65 arch/arm/mach-zx/platsmp.c pr_err("%s: failed to map aonsysctrl\n", __func__); pr_err 154 arch/arm/mach-zx/platsmp.c pr_err("*** cpu1 poweroff timeout\n"); pr_err 67 arch/arm/mach-zx/zx296702-pm-domain.c pr_err("Error: %s %s fail\n", __func__, domain->name); pr_err 88 arch/arm/mach-zx/zx296702-pm-domain.c pr_err("Error: %s %s fail\n", __func__, domain->name); pr_err 75 arch/arm/mach-zynq/common.c pr_err("%s: no devcfg node found\n", __func__); pr_err 81 arch/arm/mach-zynq/common.c pr_err("%s: Unable to map I/O memory\n", __func__); pr_err 201 arch/arm/mach-zynq/slcr.c pr_err("%s: no slcr node found\n", __func__); pr_err 207 arch/arm/mach-zynq/slcr.c pr_err("%s: Unable to map I/O memory\n", __func__); pr_err 215 arch/arm/mach-zynq/slcr.c pr_err("%s: failed to find zynq-slcr\n", __func__); pr_err 541 arch/arm/mm/alignment.c pr_err("LDMSTM: PC = %08lx, instr = %08x, " pr_err 587 arch/arm/mm/alignment.c pr_err("Alignment trap: not handling ldm with s-bit set\n"); pr_err 950 arch/arm/mm/alignment.c pr_err("Alignment trap: not handling swp instruction\n"); pr_err 956 arch/arm/mm/alignment.c pr_err("Alignment trap: not handling instruction " pr_err 304 arch/arm/mm/cache-b15-rac.c pr_err("failed to remap BIU control base\n"); pr_err 320 arch/arm/mm/cache-b15-rac.c pr_err("Unsupported CPU\n"); pr_err 329 arch/arm/mm/cache-b15-rac.c pr_err("failed to register reboot notifier\n"); pr_err 340 arch/arm/mm/cache-feroceon-l2.c pr_err(FW_BUG pr_err 630 arch/arm/mm/cache-l2x0.c pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); pr_err 633 arch/arm/mm/cache-l2x0.c pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); pr_err 640 arch/arm/mm/cache-l2x0.c pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); pr_err 994 arch/arm/mm/cache-l2x0.c pr_err("L2C OF: set size %dKB is too large\n", way_size); pr_err 1011 arch/arm/mm/cache-l2x0.c pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n", pr_err 1074 arch/arm/mm/cache-l2x0.c pr_err("l2x0 of: cache setting yield too high associativity\n"); pr_err 1075 arch/arm/mm/cache-l2x0.c pr_err("l2x0 of: %d calculated, max 8\n", assoc); pr_err 1175 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", pr_err 1209 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF arm,double-linefill property value is missing\n"); pr_err 1219 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n"); pr_err 1229 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n"); pr_err 1239 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n"); pr_err 1247 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n"); pr_err 1257 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF prefetch-data property value is missing\n"); pr_err 1267 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF prefetch-instr property value is missing\n"); pr_err 1280 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n"); pr_err 1287 arch/arm/mm/cache-l2x0.c pr_err("L2C-310 OF standby-mode property value is missing or invalid\n"); pr_err 1791 arch/arm/mm/cache-l2x0.c pr_err("L2C: device tree omits to specify unified cache\n"); pr_err 1794 arch/arm/mm/cache-l2x0.c pr_err("L2C: device tree omits to specify cache-level\n"); pr_err 1797 arch/arm/mm/cache-l2x0.c pr_err("L2C: device tree specifies invalid cache level\n"); pr_err 322 arch/arm/mm/cache-uniphier.c pr_err("L%d: not compatible with uniphier cache\n", pr_err 328 arch/arm/mm/cache-uniphier.c pr_err("L%d: cache-level is not specified\n", *cache_level); pr_err 333 arch/arm/mm/cache-uniphier.c pr_err("L%d: cache-level is unexpected value %d\n", pr_err 339 arch/arm/mm/cache-uniphier.c pr_err("L%d: cache-unified is not specified\n", *cache_level); pr_err 349 arch/arm/mm/cache-uniphier.c pr_err("L%d: cache-line-size is unspecified or invalid\n", pr_err 357 arch/arm/mm/cache-uniphier.c pr_err("L%d: cache-sets is unspecified or invalid\n", pr_err 365 arch/arm/mm/cache-uniphier.c pr_err("L%d: cache-size is unspecified or invalid\n", pr_err 376 arch/arm/mm/cache-uniphier.c pr_err("L%d: failed to map control register\n", *cache_level); pr_err 383 arch/arm/mm/cache-uniphier.c pr_err("L%d: failed to map revision register\n", *cache_level); pr_err 390 arch/arm/mm/cache-uniphier.c pr_err("L%d: failed to map operation register\n", *cache_level); pr_err 475 arch/arm/mm/cache-uniphier.c pr_err("failed to initialize L2 cache\n"); pr_err 400 arch/arm/mm/dma-mapping.c pr_err("DMA: failed to allocate %zu KiB pool for atomic coherent allocation\n", pr_err 1538 arch/arm/mm/dma-mapping.c pr_err("Remapping memory failed: %d\n", err); pr_err 146 arch/arm/mm/fault.c pr_err("8<--- cut here ---\n"); pr_err 147 arch/arm/mm/fault.c pr_err("%s: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n", pr_err 229 arch/arm/mm/init.c pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n", pr_err 235 arch/arm/mm/init.c pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region - disabling initrd\n", pr_err 608 arch/arm/mm/init.c pr_err("BUG: %s section %lx-%lx not aligned to %lx\n", pr_err 148 arch/arm/mm/mmu.c pr_err("ERROR: could not find cache policy\n"); pr_err 170 arch/arm/mm/mmu.c pr_err("ERROR: unknown or unsupported cache policy\n"); pr_err 860 arch/arm/mm/mmu.c pr_err("MM: CPU does not support supersection mapping for 0x%08llx at 0x%08lx\n", pr_err 872 arch/arm/mm/mmu.c pr_err("MM: invalid domain in supersection mapping for 0x%08llx at 0x%08lx\n", pr_err 878 arch/arm/mm/mmu.c pr_err("MM: cannot create mapping for 0x%08llx at 0x%08lx invalid alignment\n", pr_err 73 arch/arm/mm/nommu.c pr_err("Security extensions not enabled, vectors cannot be remapped to RAM, vectors base will be 0x00000000\n"); pr_err 133 arch/arm/mm/proc-v7-bugs.c pr_err("CPU%u: %s", smp_processor_id(), msg); pr_err 77 arch/arm/nwfpe/fpmodule.c pr_err("nwfpe: bad structure size\n"); pr_err 82 arch/arm/nwfpe/fpmodule.c pr_err("nwfpe: bad register size\n"); pr_err 105 arch/arm/plat-omap/counter_32k.c pr_err("32k_counter: can't register clocksource\n"); pr_err 687 arch/arm/plat-omap/dma.c pr_err("omap_dma: trying to free unallocated DMA channel %d\n", pr_err 887 arch/arm/plat-omap/dma.c pr_err("DMA drain did not complete on lch %d\n", lch); pr_err 1071 arch/arm/plat-omap/dma.c pr_err("omap_dma: trying to link non requested channels\n"); pr_err 50 arch/arm/plat-omap/sram.c pr_err("Not enough space in SRAM\n"); pr_err 111 arch/arm/plat-omap/sram.c pr_err("SRAM: Could not map\n"); pr_err 1084 arch/arm/plat-samsung/devs.c pr_err("%s: Invalid SPI configuration\n", __func__); pr_err 1120 arch/arm/plat-samsung/devs.c pr_err("%s: Invalid SPI configuration\n", __func__); pr_err 1156 arch/arm/plat-samsung/devs.c pr_err("%s: Invalid SPI configuration\n", __func__); pr_err 746 arch/arm/plat-samsung/gpio-samsung.c pr_err("gpio: %s has missing PM functions\n", pr_err 749 arch/arm/plat-samsung/gpio-samsung.c pr_err("gpio: %s has no PM function\n", gc->label); pr_err 32 arch/arm/plat-samsung/watchdog-reset.c pr_err("%s: wdt reset not initialized\n", __func__); pr_err 56 arch/arm/plat-samsung/watchdog-reset.c pr_err("Watchdog reset failed to assert reset\n"); pr_err 75 arch/arm/plat-samsung/watchdog-reset.c pr_err("%s: failed to find watchdog node\n", __func__); pr_err 81 arch/arm/plat-samsung/watchdog-reset.c pr_err("%s: failed to map watchdog registers\n", __func__); pr_err 298 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: call_test_func: func returned %lx\n", ret); pr_err 303 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: test regs not OK\n"); pr_err 339 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: register_kprobe failed with %d\n", ret); pr_err 351 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: kprobe pre_handler not called\n"); pr_err 355 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: kprobe post_handler not called\n"); pr_err 362 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: probe called after unregistering\n"); pr_err 389 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: register_kretprobe failed with %d\n", ret); pr_err 401 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: kretprobe handler not called\n"); pr_err 407 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: kretprobe called after unregistering\n"); pr_err 527 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: register_kprobe failed with %d\n", ret); pr_err 622 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n", pr_err 741 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: Out of space for test coverage data"); pr_err 899 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n", pr_err 904 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: Test coverage entry missing for %08x %08x\n", pr_err 1268 arch/arm/probes/kprobes/test-core.c pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n", pr_err 1270 arch/arm/probes/kprobes/test-core.c pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n", pr_err 1272 arch/arm/probes/kprobes/test-core.c pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n", pr_err 1274 arch/arm/probes/kprobes/test-core.c pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n", pr_err 1276 arch/arm/probes/kprobes/test-core.c pr_err("cpsr %08lx\n", regs->ARM_cpsr); pr_err 1283 arch/arm/probes/kprobes/test-core.c pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1], pr_err 1300 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: %s\n", message); pr_err 1301 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: Test %s\n", current_title); pr_err 1302 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1); pr_err 1453 arch/arm/probes/kprobes/test-core.c pr_err("initial_regs:\n"); pr_err 1455 arch/arm/probes/kprobes/test-core.c pr_err("expected_regs:\n"); pr_err 1457 arch/arm/probes/kprobes/test-core.c pr_err("result_regs:\n"); pr_err 1461 arch/arm/probes/kprobes/test-core.c pr_err("expected_memory:\n"); pr_err 1463 arch/arm/probes/kprobes/test-core.c pr_err("result_memory:\n"); pr_err 1637 arch/arm/probes/kprobes/test-core.c pr_err("FAIL: Test coverage checks failed\n"); pr_err 1649 arch/arm/probes/kprobes/test-core.c pr_err("kprobe tests failed\n"); pr_err 232 arch/arm/vfp/vfpmodule.c pr_err("VFP: Error: %s\n", reason); pr_err 233 arch/arm/vfp/vfpmodule.c pr_err("VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", pr_err 236 arch/arm/vfp/vfpmodule.c pr_err("VFP: s%2u: 0x%08x s%2u: 0x%08x\n", pr_err 301 arch/arm/xen/enlighten.c pr_err("Xen support was detected before, but it has disappeared\n"); pr_err 323 arch/arm/xen/enlighten.c pr_err("Xen event channel interrupt not found\n"); pr_err 337 arch/arm/xen/enlighten.c pr_err("not enough memory\n"); pr_err 387 arch/arm/xen/enlighten.c pr_err("Error request IRQ %d\n", xen_events_irq); pr_err 141 arch/arm64/kernel/acpi.c pr_err("Failed to get FADT table, %s\n", msg); pr_err 155 arch/arm64/kernel/acpi.c pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n", pr_err 162 arch/arm64/kernel/acpi.c pr_err("FADT has ARM boot flags set, assuming 5.1\n"); pr_err 166 arch/arm64/kernel/acpi.c pr_err("FADT not ACPI hardware reduced compliant\n"); pr_err 225 arch/arm64/kernel/acpi.c pr_err("Failed to init ACPI tables\n"); pr_err 100 arch/arm64/kernel/acpi_numa.c pr_err("SRAT: Invalid SRAT header length: %d\n", pr_err 113 arch/arm64/kernel/acpi_numa.c pr_err("SRAT: Too many proximity domains %d\n", pxm); pr_err 62 arch/arm64/kernel/cpu_ops.c pr_err("Failed to find device node for boot cpu\n"); pr_err 74 arch/arm64/kernel/cpu_ops.c pr_err("%pOF: missing enable-method property\n", pr_err 88 arch/arm64/kernel/cpu_ops.c pr_err("Unsupported ACPI enable-method\n"); pr_err 301 arch/arm64/kernel/cpuinfo.c pr_err("cpuinfo: failed to register hotplug callbacks.\n"); pr_err 113 arch/arm64/kernel/ftrace.c pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n"); pr_err 138 arch/arm64/kernel/hibernate.c pr_err("Failing to hibernate on an unknown CPU.\n"); pr_err 173 arch/arm64/kernel/hibernate.c pr_err("Failed to bring hibernate-CPU up!\n"); pr_err 290 arch/arm64/kernel/hibernate.c pr_err("Can't hibernate: no mechanism to offline secondary CPUs.\n"); pr_err 502 arch/arm64/kernel/hibernate.c pr_err("Failed to allocate memory for temporary page tables.\n"); pr_err 516 arch/arm64/kernel/hibernate.c pr_err("Failed to allocate zero page.\n"); pr_err 536 arch/arm64/kernel/hibernate.c pr_err("Failed to create safe executable page for hibernate_exit code.\n"); pr_err 571 arch/arm64/kernel/hibernate.c pr_err("Failing to resume from hibernate on an unknown CPU.\n"); pr_err 1003 arch/arm64/kernel/hw_breakpoint.c pr_err("failed to register CPU hotplug notifier: %d\n", ret); pr_err 308 arch/arm64/kernel/insn.c pr_err("aarch64_insn_decode_immediate: unknown immediate encoding %d\n", pr_err 338 arch/arm64/kernel/insn.c pr_err("aarch64_insn_encode_immediate: unknown immediate encoding %d\n", pr_err 372 arch/arm64/kernel/insn.c pr_err("%s: unknown register type encoding %d\n", __func__, pr_err 390 arch/arm64/kernel/insn.c pr_err("%s: unknown register encoding %d\n", __func__, reg); pr_err 411 arch/arm64/kernel/insn.c pr_err("%s: unknown register type encoding %d\n", __func__, pr_err 441 arch/arm64/kernel/insn.c pr_err("%s: unknown size encoding %d\n", __func__, type); pr_err 457 arch/arm64/kernel/insn.c pr_err("%s: A64 instructions must be word aligned\n", __func__); pr_err 464 arch/arm64/kernel/insn.c pr_err("%s: offset out of range\n", __func__); pr_err 494 arch/arm64/kernel/insn.c pr_err("%s: unknown branch encoding %d\n", __func__, type); pr_err 522 arch/arm64/kernel/insn.c pr_err("%s: unknown branch encoding %d\n", __func__, type); pr_err 533 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 554 arch/arm64/kernel/insn.c pr_err("%s: unknown condition encoding %d\n", __func__, cond); pr_err 589 arch/arm64/kernel/insn.c pr_err("%s: unknown branch encoding %d\n", __func__, type); pr_err 612 arch/arm64/kernel/insn.c pr_err("%s: unknown load/store encoding %d\n", __func__, type); pr_err 651 arch/arm64/kernel/insn.c pr_err("%s: unknown load/store encoding %d\n", __func__, type); pr_err 658 arch/arm64/kernel/insn.c pr_err("%s: offset must be multiples of 4 in the range of [-256, 252] %d\n", pr_err 666 arch/arm64/kernel/insn.c pr_err("%s: offset must be multiples of 8 in the range of [-512, 504] %d\n", pr_err 674 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 707 arch/arm64/kernel/insn.c pr_err("%s: unknown load/store exclusive encoding %d\n", __func__, type); pr_err 738 arch/arm64/kernel/insn.c pr_err("%s: unimplemented size encoding %d\n", __func__, size); pr_err 783 arch/arm64/kernel/insn.c pr_err("%s: unknown prfm type encoding %d\n", __func__, type); pr_err 797 arch/arm64/kernel/insn.c pr_err("%s: unknown prfm target encoding %d\n", __func__, target); pr_err 808 arch/arm64/kernel/insn.c pr_err("%s: unknown prfm policy encoding %d\n", __func__, policy); pr_err 857 arch/arm64/kernel/insn.c pr_err("%s: unknown add/sub encoding %d\n", __func__, type); pr_err 868 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 893 arch/arm64/kernel/insn.c pr_err("%s: invalid immediate encoding %d\n", __func__, imm); pr_err 917 arch/arm64/kernel/insn.c pr_err("%s: unknown bitfield encoding %d\n", __func__, type); pr_err 930 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 935 arch/arm64/kernel/insn.c pr_err("%s: invalid immr encoding %d\n", __func__, immr); pr_err 939 arch/arm64/kernel/insn.c pr_err("%s: invalid imms encoding %d\n", __func__, imms); pr_err 970 arch/arm64/kernel/insn.c pr_err("%s: unknown movewide encoding %d\n", __func__, type); pr_err 975 arch/arm64/kernel/insn.c pr_err("%s: invalid immediate encoding %d\n", __func__, imm); pr_err 982 arch/arm64/kernel/insn.c pr_err("%s: invalid shift encoding %d\n", __func__, pr_err 990 arch/arm64/kernel/insn.c pr_err("%s: invalid shift encoding %d\n", __func__, pr_err 996 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1030 arch/arm64/kernel/insn.c pr_err("%s: unknown add/sub encoding %d\n", __func__, type); pr_err 1037 arch/arm64/kernel/insn.c pr_err("%s: invalid shift encoding %d\n", __func__, pr_err 1045 arch/arm64/kernel/insn.c pr_err("%s: invalid shift encoding %d\n", __func__, pr_err 1051 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1081 arch/arm64/kernel/insn.c pr_err("%s: invalid variant for reverse64 %d\n", pr_err 1088 arch/arm64/kernel/insn.c pr_err("%s: unknown data1 encoding %d\n", __func__, type); pr_err 1099 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1136 arch/arm64/kernel/insn.c pr_err("%s: unknown data2 encoding %d\n", __func__, type); pr_err 1147 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1175 arch/arm64/kernel/insn.c pr_err("%s: unknown data3 encoding %d\n", __func__, type); pr_err 1186 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1236 arch/arm64/kernel/insn.c pr_err("%s: unknown logical encoding %d\n", __func__, type); pr_err 1243 arch/arm64/kernel/insn.c pr_err("%s: invalid shift encoding %d\n", __func__, pr_err 1251 arch/arm64/kernel/insn.c pr_err("%s: invalid shift encoding %d\n", __func__, pr_err 1257 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1288 arch/arm64/kernel/insn.c pr_err("%s: unknown adr encoding %d\n", __func__, type); pr_err 1528 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 1624 arch/arm64/kernel/insn.c pr_err("%s: unknown logical encoding %d\n", __func__, type); pr_err 1655 arch/arm64/kernel/insn.c pr_err("%s: unknown variant encoding %d\n", __func__, variant); pr_err 73 arch/arm64/kernel/machine_kexec.c pr_err("Can't kexec: CPUs are stuck in the kernel.\n"); pr_err 216 arch/arm64/kernel/machine_kexec_file.c pr_err("Preparing for new dtb failed\n"); pr_err 282 arch/arm64/kernel/module-plts.c pr_err("%s: module PLT section(s) missing\n", mod->name); pr_err 286 arch/arm64/kernel/module-plts.c pr_err("%s: module symtab section missing\n", mod->name); pr_err 84 arch/arm64/kernel/module.c pr_err("do_reloc: unknown relocation operation %d\n", reloc_op); pr_err 117 arch/arm64/kernel/module.c pr_err("Invalid 16-bit data relocation (%d)\n", op); pr_err 133 arch/arm64/kernel/module.c pr_err("Invalid 32-bit data relocation (%d)\n", op); pr_err 141 arch/arm64/kernel/module.c pr_err("Invalid length (%d) for data relocation\n", len); pr_err 455 arch/arm64/kernel/module.c pr_err("module %s: unsupported RELA relocation: %llu\n", pr_err 468 arch/arm64/kernel/module.c pr_err("module %s: overflow in relocation type %d val %Lx\n", pr_err 432 arch/arm64/kernel/perf_event.c pr_err("CPU%u reading wrong counter %d\n", pr_err 468 arch/arm64/kernel/perf_event.c pr_err("CPU%u writing wrong counter %d\n", pr_err 32 arch/arm64/kernel/psci.c pr_err("no cpu_on method, not booting CPU%d\n", cpu); pr_err 43 arch/arm64/kernel/psci.c pr_err("failed to boot CPU%d (%d)\n", cpu, err); pr_err 64 arch/arm64/kernel/reloc_test_core.c pr_err("Relocation failed, expected 0x%016llx, not 0x%016llx\n", pr_err 155 arch/arm64/kernel/sdei.c pr_err("Not supported on this hardware/boot configuration\n"); pr_err 360 arch/arm64/kernel/setup.c pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n" pr_err 133 arch/arm64/kernel/smp.c pr_err("CPU%u: failed to boot: %d\n", cpu, ret); pr_err 148 arch/arm64/kernel/smp.c pr_err("CPU%u: failed in unknown state : 0x%lx\n", pr_err 451 arch/arm64/kernel/smp.c pr_err("%pOF: missing reg property\n", dn); pr_err 460 arch/arm64/kernel/smp.c pr_err("%pOF: invalid reg property\n", dn); pr_err 527 arch/arm64/kernel/smp.c pr_err("skipping CPU entry with invalid MPIDR 0x%llx\n", hwid); pr_err 532 arch/arm64/kernel/smp.c pr_err("duplicate CPU MPIDR 0x%llx in MADT\n", hwid); pr_err 539 arch/arm64/kernel/smp.c pr_err("duplicate boot CPU MPIDR: 0x%llx in MADT\n", pr_err 632 arch/arm64/kernel/smp.c pr_err("%pOF: duplicate cpu reg properties in the DT\n", pr_err 645 arch/arm64/kernel/smp.c pr_err("%pOF: duplicate boot cpu reg property in DT\n", pr_err 693 arch/arm64/kernel/smp.c pr_err("missing boot CPU MPIDR, not enabling secondaries\n"); pr_err 58 arch/arm64/kernel/smp_spin_table.c pr_err("CPU %d: missing or invalid cpu-release-addr property\n", pr_err 924 arch/arm64/kernel/traps.c pr_err("%s:%d: bad pte %016lx.\n", file, line, val); pr_err 929 arch/arm64/kernel/traps.c pr_err("%s:%d: bad pmd %016lx.\n", file, line, val); pr_err 934 arch/arm64/kernel/traps.c pr_err("%s:%d: bad pud %016lx.\n", file, line, val); pr_err 939 arch/arm64/kernel/traps.c pr_err("%s:%d: bad pgd %016lx.\n", file, line, val); pr_err 107 arch/arm64/kernel/vdso.c pr_err("vDSO is not a valid ELF object!\n"); pr_err 483 arch/arm64/mm/hugetlbpage.c pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10); pr_err 206 arch/arm64/mm/numa.c pr_err("memblock [0x%llx - 0x%llx] failed to add on node %d\n", pr_err 436 arch/arm64/mm/numa.c pr_err("NUMA init failed\n"); pr_err 32 arch/c6x/kernel/module.c pr_err("PCR_S%d reloc %p -> %p out of range!\n", pr_err 112 arch/c6x/kernel/module.c pr_err("module %s: Unknown RELA relocation: %u\n", pr_err 30 arch/c6x/kernel/traps.c pr_err("\n"); pr_err 32 arch/c6x/kernel/traps.c pr_err("PC: %08lx SP: %08lx\n", regs->pc, regs->sp); pr_err 33 arch/c6x/kernel/traps.c pr_err("Status: %08lx ORIG_A4: %08lx\n", regs->csr, regs->orig_a4); pr_err 34 arch/c6x/kernel/traps.c pr_err("A0: %08lx B0: %08lx\n", regs->a0, regs->b0); pr_err 35 arch/c6x/kernel/traps.c pr_err("A1: %08lx B1: %08lx\n", regs->a1, regs->b1); pr_err 36 arch/c6x/kernel/traps.c pr_err("A2: %08lx B2: %08lx\n", regs->a2, regs->b2); pr_err 37 arch/c6x/kernel/traps.c pr_err("A3: %08lx B3: %08lx\n", regs->a3, regs->b3); pr_err 38 arch/c6x/kernel/traps.c pr_err("A4: %08lx B4: %08lx\n", regs->a4, regs->b4); pr_err 39 arch/c6x/kernel/traps.c pr_err("A5: %08lx B5: %08lx\n", regs->a5, regs->b5); pr_err 40 arch/c6x/kernel/traps.c pr_err("A6: %08lx B6: %08lx\n", regs->a6, regs->b6); pr_err 41 arch/c6x/kernel/traps.c pr_err("A7: %08lx B7: %08lx\n", regs->a7, regs->b7); pr_err 42 arch/c6x/kernel/traps.c pr_err("A8: %08lx B8: %08lx\n", regs->a8, regs->b8); pr_err 43 arch/c6x/kernel/traps.c pr_err("A9: %08lx B9: %08lx\n", regs->a9, regs->b9); pr_err 44 arch/c6x/kernel/traps.c pr_err("A10: %08lx B10: %08lx\n", regs->a10, regs->b10); pr_err 45 arch/c6x/kernel/traps.c pr_err("A11: %08lx B11: %08lx\n", regs->a11, regs->b11); pr_err 46 arch/c6x/kernel/traps.c pr_err("A12: %08lx B12: %08lx\n", regs->a12, regs->b12); pr_err 47 arch/c6x/kernel/traps.c pr_err("A13: %08lx B13: %08lx\n", regs->a13, regs->b13); pr_err 48 arch/c6x/kernel/traps.c pr_err("A14: %08lx B14: %08lx\n", regs->a14, regs->dp); pr_err 49 arch/c6x/kernel/traps.c pr_err("A15: %08lx B15: %08lx\n", regs->a15, regs->sp); pr_err 50 arch/c6x/kernel/traps.c pr_err("A16: %08lx B16: %08lx\n", regs->a16, regs->b16); pr_err 51 arch/c6x/kernel/traps.c pr_err("A17: %08lx B17: %08lx\n", regs->a17, regs->b17); pr_err 52 arch/c6x/kernel/traps.c pr_err("A18: %08lx B18: %08lx\n", regs->a18, regs->b18); pr_err 53 arch/c6x/kernel/traps.c pr_err("A19: %08lx B19: %08lx\n", regs->a19, regs->b19); pr_err 54 arch/c6x/kernel/traps.c pr_err("A20: %08lx B20: %08lx\n", regs->a20, regs->b20); pr_err 55 arch/c6x/kernel/traps.c pr_err("A21: %08lx B21: %08lx\n", regs->a21, regs->b21); pr_err 56 arch/c6x/kernel/traps.c pr_err("A22: %08lx B22: %08lx\n", regs->a22, regs->b22); pr_err 57 arch/c6x/kernel/traps.c pr_err("A23: %08lx B23: %08lx\n", regs->a23, regs->b23); pr_err 58 arch/c6x/kernel/traps.c pr_err("A24: %08lx B24: %08lx\n", regs->a24, regs->b24); pr_err 59 arch/c6x/kernel/traps.c pr_err("A25: %08lx B25: %08lx\n", regs->a25, regs->b25); pr_err 60 arch/c6x/kernel/traps.c pr_err("A26: %08lx B26: %08lx\n", regs->a26, regs->b26); pr_err 61 arch/c6x/kernel/traps.c pr_err("A27: %08lx B27: %08lx\n", regs->a27, regs->b27); pr_err 62 arch/c6x/kernel/traps.c pr_err("A28: %08lx B28: %08lx\n", regs->a28, regs->b28); pr_err 63 arch/c6x/kernel/traps.c pr_err("A29: %08lx B29: %08lx\n", regs->a29, regs->b29); pr_err 64 arch/c6x/kernel/traps.c pr_err("A30: %08lx B30: %08lx\n", regs->a30, regs->b30); pr_err 65 arch/c6x/kernel/traps.c pr_err("A31: %08lx B31: %08lx\n", regs->a31, regs->b31); pr_err 71 arch/c6x/kernel/traps.c pr_err("%s: %08x\n", str, nr); pr_err 74 arch/c6x/kernel/traps.c pr_err("Process %s (pid: %d, stackpage=%08lx)\n", pr_err 246 arch/c6x/kernel/traps.c pr_err("TRAP: %s PC[0x%lx] signo[%d] code[%d]\n", pr_err 266 arch/c6x/kernel/traps.c pr_err("IEXCEPT: PC[0x%lx]\n", regs->pc); pr_err 296 arch/c6x/kernel/traps.c pr_err("EEXCEPT: PC[0x%lx]\n", regs->pc); pr_err 208 arch/c6x/platforms/megamod-pic.c pr_err("%pOF: Could not alloc PIC structure.\n", np); pr_err 215 arch/c6x/platforms/megamod-pic.c pr_err("%pOF: Could not alloc host.\n", np); pr_err 225 arch/c6x/platforms/megamod-pic.c pr_err("%pOF: Could not map registers.\n", np); pr_err 253 arch/c6x/platforms/megamod-pic.c pr_err("%pOF: combiner-%d no irq_data for virq %d!\n", pr_err 265 arch/c6x/platforms/megamod-pic.c pr_err("%pOF: combiner-%d core irq %ld out of range!\n", pr_err 437 arch/c6x/platforms/plldata.c pr_err("%pOF: no clock-frequency found! Using %dMHz\n", pr_err 226 arch/csky/abiv1/alignment.c pr_err("%s user disabled.\n", __func__); pr_err 234 arch/csky/abiv1/alignment.c pr_err("%s get_user failed.\n", __func__); pr_err 242 arch/csky/abiv1/alignment.c pr_err("%s kernel disabled.\n", __func__); pr_err 35 arch/csky/include/asm/pgtable.h pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low) pr_err 37 arch/csky/include/asm/pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err 78 arch/csky/kernel/ftrace.c pr_err("%p: nop but get (%04x %04x %04x %04x %04x %04x %04x)\n", pr_err 92 arch/csky/kernel/module.c pr_err("module %s: Unknown relocation: %u\n", pr_err 1170 arch/csky/kernel/perf_event.c pr_err("no irqs for PMUs defined\n"); pr_err 1180 arch/csky/kernel/perf_event.c pr_err("unable to request IRQ%d for CSKY PMU counters\n", pr_err 85 arch/csky/kernel/traps.c pr_err("%s: %08x\n", str, nr); pr_err 106 arch/csky/kernel/traps.c pr_err("User mode Bus Error\n"); pr_err 61 arch/h8300/kernel/module.c pr_err("module %s: Unknown relocation: %u\n", pr_err 68 arch/h8300/kernel/module.c pr_err("module %s: relocation offset overflow: %08x\n", pr_err 419 arch/ia64/kernel/acpi.c pr_err("NUMA: too many memblk ranges\n"); pr_err 139 arch/ia64/pci/pci.c pr_err("PCI: Too many IO port spaces " pr_err 555 arch/ia64/pci/pci.c pr_err("%s: ia64_pal_cache_summary() failed " pr_err 563 arch/ia64/pci/pci.c pr_err("%s: ia64_pal_cache_config_info() failed " pr_err 62 arch/ia64/uv/kernel/setup.c pr_err("ACPI 2.0 RSDP not found.\n"); pr_err 68 arch/ia64/uv/kernel/setup.c pr_err("ACPI 2.0 RSDP signature incorrect.\n"); pr_err 75 arch/ia64/uv/kernel/setup.c pr_err("ACPI 2.0 XSDT signature incorrect.\n"); pr_err 84 arch/m68k/amiga/chipram.c pr_err("amiga_chip_alloc_res: allocate_resource() failed %d!\n", pr_err 102 arch/m68k/amiga/chipram.c pr_err("amiga_chip_free: trying to free nonexistent region at " pr_err 194 arch/m68k/amiga/cia.c pr_err("Couldn't register %s interrupt\n", base->name); pr_err 509 arch/m68k/amiga/config.c pr_err("Couldn't register timer interrupt\n"); pr_err 653 arch/m68k/amiga/config.c pr_err("Not enough chipram for debugging\n"); pr_err 203 arch/m68k/apollo/config.c pr_err("Couldn't register timer interrupt\n"); pr_err 349 arch/m68k/atari/ataints.c pr_err("Couldn't register %s interrupt\n", stmfp_base.name); pr_err 302 arch/m68k/atari/atakeyb.c pr_err("Error in keyboard communication\n"); pr_err 556 arch/m68k/atari/atakeyb.c pr_err("Keyboard self test failed!\n"); pr_err 265 arch/m68k/atari/nvram.c pr_err("nvram: can't create /proc/driver/nvram\n"); pr_err 203 arch/m68k/atari/stdma.c pr_err("Couldn't register ST-DMA interrupt\n"); pr_err 173 arch/m68k/atari/stram.c pr_err("atari_stram_alloc: allocate_resource() failed %d!\n", pr_err 193 arch/m68k/atari/stram.c pr_err("atari_stram_free: trying to free nonexistent region " pr_err 67 arch/m68k/atari/time.c pr_err("Couldn't register timer interrupt\n"); pr_err 146 arch/m68k/emu/nfcon.c pr_err("failed to register nfcon tty driver\n"); pr_err 241 arch/m68k/emu/nfeth.c pr_err("request for irq %d failed %d", nfEtherIRQ, error); pr_err 109 arch/m68k/hp300/time.c pr_err("Couldn't register timer interrupt\n"); pr_err 121 arch/m68k/include/asm/math-emu.h pr_err("You just hit an unimplemented " \ pr_err 123 arch/m68k/include/asm/math-emu.h pr_err("Please report this to ....\n"); \ pr_err 155 arch/m68k/include/asm/sun3_pgtable.h pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) pr_err 157 arch/m68k/include/asm/sun3_pgtable.h pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) pr_err 159 arch/m68k/include/asm/sun3_pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err 46 arch/m68k/kernel/bootinfo_proc.c pr_err("Cannot save %zu bytes of bootinfo\n", size); pr_err 54 arch/m68k/kernel/module.c pr_err("module %s: Unknown relocation: %u\n", me->name, pr_err 94 arch/m68k/kernel/module.c pr_err("module %s: Unknown relocation: %u\n", me->name, pr_err 61 arch/m68k/kernel/pcibios.c pr_err("PCI: Device %s not available because of resource collisions\n", pr_err 173 arch/m68k/kernel/traps.c pr_err("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, pr_err 175 arch/m68k/kernel/traps.c pr_err("68060 access error, fslw=%lx\n", fslw); pr_err 248 arch/m68k/kernel/traps.c pr_err("access_error040: cannot handle 1st writeback. oops.\n"); pr_err 360 arch/m68k/kernel/traps.c pr_err("68040 bus error (ssw=%x, faddr=%lx)\n", ssw, pr_err 416 arch/m68k/kernel/traps.c pr_err("Instruction fault at %#010lx\n", pr_err 426 arch/m68k/kernel/traps.c pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n", pr_err 431 arch/m68k/kernel/traps.c pr_err("BAD KERNEL BUSERR\n"); pr_err 554 arch/m68k/kernel/traps.c pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n", pr_err 567 arch/m68k/kernel/traps.c pr_err("unexpected bus error (%#x,%#x)\n", ssw, pr_err 570 arch/m68k/kernel/traps.c pr_err("invalid %s access at %#lx from pc %#lx\n", pr_err 581 arch/m68k/kernel/traps.c pr_err("weird %s access at %#lx from pc %#lx (ssw is %#x)\n", pr_err 590 arch/m68k/kernel/traps.c pr_err("level 0 mmusr is %#x\n", mmusr); pr_err 620 arch/m68k/kernel/traps.c pr_err("Instruction fault at %#010lx\n", fp->ptregs.pc); pr_err 622 arch/m68k/kernel/traps.c pr_err("BAD KERNEL BUSERR\n"); pr_err 659 arch/m68k/kernel/traps.c pr_err("invalid insn access at %#lx from pc %#lx\n", pr_err 979 arch/m68k/kernel/traps.c pr_err("*** %s *** FORMAT=%X\n", pr_err 983 arch/m68k/kernel/traps.c pr_err("*** Exception %d *** FORMAT=%X\n", pr_err 988 arch/m68k/kernel/traps.c pr_err("SSW=%#06x ", ssw); pr_err 991 arch/m68k/kernel/traps.c pr_err("Pipe stage C instruction fault at %#010lx\n", pr_err 995 arch/m68k/kernel/traps.c pr_err("Pipe stage B instruction fault at %#010lx\n", pr_err 999 arch/m68k/kernel/traps.c pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n", pr_err 1004 arch/m68k/kernel/traps.c pr_err("Current process id is %d\n", task_pid_nr(current)); pr_err 151 arch/m68k/mac/config.c pr_err("ERROR: no Mac, but config_mac() called!!\n"); pr_err 311 arch/m68k/mac/iop.c pr_err("Couldn't register ISM IOP interrupt\n"); pr_err 315 arch/m68k/mac/iop.c pr_err("Couldn't register ISM IOP interrupt\n"); pr_err 166 arch/m68k/mac/macints.c pr_err("Couldn't register NMI\n"); pr_err 279 arch/m68k/mac/misc.c pr_err("%s: failed to read a stable value; got 0x%08x then 0x%08x\n", pr_err 614 arch/m68k/mac/via.c pr_err("Couldn't register %s interrupt\n", "timer"); pr_err 134 arch/m68k/mvme147/config.c pr_err("Couldn't register timer interrupt\n"); pr_err 97 arch/m68k/sun3/sun3ints.c pr_err("Couldn't register %s interrupt\n", "int5"); pr_err 99 arch/m68k/sun3/sun3ints.c pr_err("Couldn't register %s interrupt\n", "int7"); pr_err 101 arch/m68k/sun3/sun3ints.c pr_err("Couldn't register %s interrupt\n", "vec255"); pr_err 41 arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n"); pr_err 94 arch/microblaze/kernel/cpu/cpuinfo.c pr_err("You don't have cpu or are missing cpu reg property!!!\n"); pr_err 130 arch/microblaze/kernel/cpu/cpuinfo.c pr_err("ERROR: CPU CCF input clock not found\n"); pr_err 138 arch/microblaze/kernel/cpu/cpuinfo.c pr_err("ERROR: CPU clock frequency not setup\n"); pr_err 108 arch/microblaze/kernel/module.c pr_err("module %s: Unknown relocation: %u\n", pr_err 239 arch/microblaze/kernel/timer.c pr_err("failed to register clocksource"); pr_err 268 arch/microblaze/kernel/timer.c pr_err("ERROR: invalid timer base address\n"); pr_err 283 arch/microblaze/kernel/timer.c pr_err("Failed to parse and map irq"); pr_err 289 arch/microblaze/kernel/timer.c pr_err("Please enable two timers in HW\n"); pr_err 297 arch/microblaze/kernel/timer.c pr_err("ERROR: timer CCF input clock not found\n"); pr_err 306 arch/microblaze/kernel/timer.c pr_err("ERROR: Using CPU clock frequency\n"); pr_err 314 arch/microblaze/kernel/timer.c pr_err("Failed to setup IRQ"); pr_err 566 arch/microblaze/pci/pci-common.c pr_err("No host bridge for PCI dev %s !\n", pr_err 939 arch/microblaze/pci/pci-common.c pr_err("PCI: Memory resource 0 not set for "); pr_err 976 arch/microblaze/pci/pci-common.c pr_err("Failed to create bus for PCI domain %04x\n", pr_err 1096 arch/microblaze/pci/pci-common.c pr_err("Can't find hose for PCI bus %d!\n", busnr); pr_err 134 arch/microblaze/pci/xilinx_pci.c pr_err("xilinx-pci: cannot resolve base address\n"); pr_err 140 arch/microblaze/pci/xilinx_pci.c pr_err("xilinx-pci: pcibios_alloc_controller() failed\n"); pr_err 987 arch/mips/alchemy/common/irq.c pr_err("unknown Alchemy IRQ core\n"); pr_err 77 arch/mips/alchemy/devboards/db1xxx.c pr_err("unsupported CPU on board\n"); pr_err 650 arch/mips/ar7/platform.c pr_err("unable to setup uart(s): %d\n", res); pr_err 629 arch/mips/ath79/clock.c pr_err("%pOF: can't map pll registers\n", np); pr_err 653 arch/mips/ath79/clock.c pr_err("%pOF: could not register clk provider\n", np); pr_err 253 arch/mips/ath79/setup.c pr_err("Failed to get CPU node\n"); pr_err 259 arch/mips/ath79/setup.c pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); pr_err 713 arch/mips/bcm47xx/buttons.c pr_err("Failed to register platform device: %d\n", err); pr_err 188 arch/mips/bcm47xx/setup.c pr_err("Failed to set SoC device name: %d\n", err); pr_err 195 arch/mips/bcm47xx/setup.c pr_err("Failed to set SoC DMA mask: %d\n", err); pr_err 268 arch/mips/bcm47xx/setup.c pr_err("Failed to register SoC device\n"); pr_err 14 arch/mips/bcm47xx/workarounds.c pr_err("Failed to request USB power gpio: %d\n", err); pr_err 727 arch/mips/bcm63xx/boards/board_bcm963xx.c pr_err("unable to fill SPROM for given bustype\n"); pr_err 795 arch/mips/bcm63xx/boards/board_bcm963xx.c pr_err("unknown bcm963xx board: %s\n", name); pr_err 893 arch/mips/bcm63xx/boards/board_bcm963xx.c pr_err("failed to register fallback SPROM\n"); pr_err 127 arch/mips/bcm63xx/dev-flash.c pr_err("flash detection failed for BCM%x: %d\n", pr_err 142 arch/mips/bcm63xx/dev-pcmcia.c pr_err("unable to set pcmcia chip select\n"); pr_err 313 arch/mips/bcm63xx/irq.c pr_err("bogus flow type combination given !\n"); pr_err 62 arch/mips/bcm63xx/nvram.c pr_err("not enough mac addresses\n"); pr_err 81 arch/mips/bcm63xx/nvram.c pr_err("unable to fetch mac address\n"); pr_err 199 arch/mips/bcm63xx/timer.c pr_err("%s: failed to register irq\n", __func__); pr_err 119 arch/mips/bmips/dma.c pr_err("error parsing dma-ranges property\n"); pr_err 115 arch/mips/cavium-octeon/flash_setup.c pr_err("Failed to register MTD device for flash\n"); pr_err 1183 arch/mips/cavium-octeon/octeon-irq.c pr_err("Error: (%pOFn) Invalid irq trigger specification: %x\n", pr_err 2196 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: %s mapping %u is to big!\n", pr_err 2243 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: CIB bit %d@%llx IRQ unhandled, disabling\n", pr_err 2277 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: Couldn't acquire parent_irq for %pOFn\n", pr_err 2289 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: Couldn't acquire reg(0) %pOFn\n", ciu_node); pr_err 2297 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: Couldn't acquire reg(1) %pOFn\n", ciu_node); pr_err 2305 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: Couldn't read cavium,max-bits from %pOFn\n", pr_err 2315 arch/mips/cavium-octeon/octeon-irq.c pr_err("ERROR: Couldn't irq_domain_add_linear()\n"); pr_err 2325 arch/mips/cavium-octeon/octeon-irq.c pr_err("request_irq cib failed %d\n", r); pr_err 142 arch/mips/cavium-octeon/octeon-platform.c pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n", pr_err 558 arch/mips/cavium-octeon/octeon-platform.c pr_err("Error: could not rename ethernet phy: <%s>", p); pr_err 585 arch/mips/cavium-octeon/octeon-platform.c pr_err("Setting \"local-mac-address\" failed %d", r); pr_err 780 arch/mips/cavium-octeon/octeon-platform.c pr_err("Error: No /aliases node in device tree."); pr_err 304 arch/mips/cavium-octeon/octeon-usb.c pr_err("No UCTL \"refclk-frequency\"\n"); pr_err 310 arch/mips/cavium-octeon/octeon-usb.c pr_err("No UCTL \"refclk-type-ss\"\n"); pr_err 316 arch/mips/cavium-octeon/octeon-usb.c pr_err("No UCTL \"refclk-type-hs\"\n"); pr_err 325 arch/mips/cavium-octeon/octeon-usb.c pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n", pr_err 333 arch/mips/cavium-octeon/octeon-usb.c pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n", pr_err 338 arch/mips/cavium-octeon/octeon-usb.c pr_err("Invalid SS clock type %s, using dlmc_ref_clk0 instead\n", pr_err 343 arch/mips/cavium-octeon/octeon-usb.c pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n", pr_err 347 arch/mips/cavium-octeon/octeon-usb.c pr_err("No USB UCTL device node\n"); pr_err 124 arch/mips/cavium-octeon/setup.c pr_err("Error: requested memory too large," pr_err 407 arch/mips/cavium-octeon/setup.c pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n", pr_err 412 arch/mips/cavium-octeon/setup.c pr_err("Core%d L1 Dcache parity error: " pr_err 419 arch/mips/cavium-octeon/setup.c pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n", pr_err 799 arch/mips/cavium-octeon/setup.c pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); pr_err 1227 arch/mips/cavium-octeon/setup.c pr_err("Registration of %s failed!\n", name); pr_err 1238 arch/mips/cavium-octeon/setup.c pr_err("Registration of octeon_lmc_edac %d failed!\n", i); pr_err 228 arch/mips/cavium-octeon/smp.c pr_err("Secondary boot timeout\n"); pr_err 151 arch/mips/fw/arc/memory.c pr_err("Too many ROM DATA regions"); pr_err 63 arch/mips/generic/board-sead3.c pr_err("unable to find DT GIC node: %d\n", gic_off); pr_err 69 arch/mips/generic/board-sead3.c pr_err("unable to nop GIC node\n"); pr_err 76 arch/mips/generic/board-sead3.c pr_err("unable to find CPU intc node: %d\n", cpu_off); pr_err 82 arch/mips/generic/board-sead3.c pr_err("unable to get CPU intc phandle\n"); pr_err 99 arch/mips/generic/board-sead3.c pr_err("unable to set UART interrupts property: %d\n", pr_err 108 arch/mips/generic/board-sead3.c pr_err("error searching for UART DT node: %d\n", uart_off); pr_err 114 arch/mips/generic/board-sead3.c pr_err("unable to find ethernet DT node: %d\n", eth_off); pr_err 120 arch/mips/generic/board-sead3.c pr_err("unable to set ethernet interrupt-parent: %d\n", err); pr_err 126 arch/mips/generic/board-sead3.c pr_err("unable to set ethernet interrupts property: %d\n", err); pr_err 132 arch/mips/generic/board-sead3.c pr_err("unable to find EHCI DT node: %d\n", ehci_off); pr_err 138 arch/mips/generic/board-sead3.c pr_err("unable to set EHCI interrupt-parent: %d\n", err); pr_err 144 arch/mips/generic/board-sead3.c pr_err("unable to set EHCI interrupts property: %d\n", err); pr_err 133 arch/mips/generic/init.c pr_err("Failed to open FDT\n"); pr_err 140 arch/mips/generic/init.c pr_err("Failed to apply FDT fixup \"%s\"\n", pr_err 148 arch/mips/generic/init.c pr_err("Failed to pack FDT\n"); pr_err 166 arch/mips/generic/init.c pr_err("Failed to get CPU node\n"); pr_err 172 arch/mips/generic/init.c pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); pr_err 29 arch/mips/generic/yamon-dt.c pr_err("Unable to find or add DT chosen node: %d\n", pr_err 36 arch/mips/generic/yamon-dt.c pr_err("Unable to set bootargs property: %d\n", err); pr_err 126 arch/mips/generic/yamon-dt.c pr_err("Unable to find or add memory DT node: %d\n", mem_off); pr_err 132 arch/mips/generic/yamon-dt.c pr_err("Unable to set memory node device_type: %d\n", err); pr_err 141 arch/mips/generic/yamon-dt.c pr_err("Unable to set memory regs property: %d\n", err); pr_err 150 arch/mips/generic/yamon-dt.c pr_err("Unable to set linux,usable-memory property: %d\n", err); pr_err 220 arch/mips/generic/yamon-dt.c pr_err("Unable to find or add DT chosen node: %d\n", pr_err 227 arch/mips/generic/yamon-dt.c pr_err("Unable to set stdout-path property: %d\n", err); pr_err 1900 arch/mips/include/asm/octeon/cvmx-pow.h pr_err("POW static priorities should be " pr_err 833 arch/mips/kernel/cpu-probe.c pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n", pr_err 225 arch/mips/kernel/mips-cm.c pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n", pr_err 381 arch/mips/kernel/mips-cm.c pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, pr_err 383 arch/mips/kernel/mips-cm.c pr_err("CM_ADDR =%08llx\n", cm_addr); pr_err 384 arch/mips/kernel/mips-cm.c pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]); pr_err 449 arch/mips/kernel/mips-cm.c pr_err("CM_ERROR=%llx %s <%s>\n", cm_error, pr_err 451 arch/mips/kernel/mips-cm.c pr_err("CM_ADDR =%llx\n", cm_addr); pr_err 452 arch/mips/kernel/mips-cm.c pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]); pr_err 1994 arch/mips/kernel/mips-r2-to-r6-emul.c pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); pr_err 2050 arch/mips/kernel/mips-r2-to-r6-emul.c pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); pr_err 2113 arch/mips/kernel/mips-r2-to-r6-emul.c pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); pr_err 2174 arch/mips/kernel/mips-r2-to-r6-emul.c pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); pr_err 34 arch/mips/kernel/mips_machine.c pr_err("MIPS: no machine found for id '%s', supported machines:\n", id); pr_err 35 arch/mips/kernel/mips_machine.c pr_err("%-24s %s\n", "id", "name"); pr_err 37 arch/mips/kernel/mips_machine.c pr_err("%-24s %s\n", mach->mach_id, mach->mach_name); pr_err 62 arch/mips/kernel/module.c pr_err("module %s: dangerous R_MIPS_26 relocation\n", pr_err 68 arch/mips/kernel/module.c pr_err("module %s: relocation overflow\n", pr_err 185 arch/mips/kernel/module.c pr_err("module %s: dangerous R_MIPS_LO16 relocation\n", me->name); pr_err 198 arch/mips/kernel/module.c pr_err("module %s: dangerous R_MIPS_PC%u relocation\n", pr_err 212 arch/mips/kernel/module.c pr_err("module %s: relocation overflow\n", me->name); pr_err 353 arch/mips/kernel/module.c pr_err("%s: Unknown relocation type %u\n", pr_err 650 arch/mips/kernel/pm-cps.c pr_err("Failed to generate core %u state %u entry\n", pr_err 661 arch/mips/kernel/pm-cps.c pr_err("Failed allocate core %u ready_count\n", core); pr_err 92 arch/mips/kernel/relocate.c pr_err("Dangerous R_MIPS_26 REL relocation\n"); pr_err 104 arch/mips/kernel/relocate.c pr_err("R_MIPS_26 REL relocation overflow\n"); pr_err 154 arch/mips/kernel/relocate.c pr_err("Unhandled relocation type %d at 0x%pK\n", pr_err 66 arch/mips/kernel/rtlx-cmp.c pr_err("rtlx_module_init: unable to register device\n"); pr_err 96 arch/mips/kernel/rtlx-cmp.c pr_err("APRP RTLX init on non-vectored-interrupt processor\n"); pr_err 92 arch/mips/kernel/rtlx-mt.c pr_err("rtlx_module_init: unable to register device\n"); pr_err 122 arch/mips/kernel/rtlx-mt.c pr_err("APRP RTLX init on non-vectored-interrupt processor\n"); pr_err 58 arch/mips/kernel/rtlx.c pr_err("no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id); pr_err 147 arch/mips/kernel/rtlx.c pr_err(" *vpe_get_shared is NULL. Has an SP program been loaded?\n"); pr_err 185 arch/mips/kernel/rtlx.c pr_err("rtlx_release() with null rtlx\n"); pr_err 190 arch/mips/kernel/setup.c pr_err("initrd start must be page aligned\n"); pr_err 194 arch/mips/kernel/setup.c pr_err("initrd start < PAGE_OFFSET\n"); pr_err 423 arch/mips/kernel/setup.c pr_err("\"memmap=exactmap\" invalid on MIPS\n"); pr_err 436 arch/mips/kernel/setup.c pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n"); pr_err 442 arch/mips/kernel/setup.c pr_err("\"memmap\" invalid format!\n"); pr_err 175 arch/mips/kernel/smp-cps.c pr_err("Failed to allocate boot config for %u cores\n", ncores); pr_err 186 arch/mips/kernel/smp-cps.c pr_err("Failed to allocate %u VPE boot configs\n", pr_err 531 arch/mips/kernel/smp-cps.c pr_err("CPU%u: didn't offline\n", cpu); pr_err 1799 arch/mips/kernel/traps.c pr_err("Error bits: %s%s%s%s%s%s%s%s\n", pr_err 1809 arch/mips/kernel/traps.c pr_err("Error bits: %s%s%s%s%s%s%s\n", pr_err 1840 arch/mips/kernel/traps.c pr_err("FTLB error exception, cp0_ecc=0x%08x:\n", pr_err 1842 arch/mips/kernel/traps.c pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc()); pr_err 1844 arch/mips/kernel/traps.c pr_err("c0_cacheerr == %08x\n", reg_val); pr_err 1847 arch/mips/kernel/traps.c pr_err("Decoded c0_cacheerr: FTLB parity error\n"); pr_err 1849 arch/mips/kernel/traps.c pr_err("Decoded c0_cacheerr: %s cache fault in %s reference.\n", pr_err 1854 arch/mips/kernel/traps.c pr_err("FTLB error exception\n"); pr_err 115 arch/mips/kernel/vpe-cmp.c pr_err("vpe_class registration failed\n"); pr_err 126 arch/mips/kernel/vpe-cmp.c pr_err("Adding vpe_device failed\n"); pr_err 363 arch/mips/kernel/vpe-mt.c pr_err("vpe_class registration failed\n"); pr_err 374 arch/mips/kernel/vpe-mt.c pr_err("Adding vpe_device failed\n"); pr_err 606 arch/mips/kernel/vpe.c pr_err("VPE loader: program length %u truncated\n", len); pr_err 623 arch/mips/kernel/vpe.c pr_err("VPE program length %u truncated\n", pr_err 90 arch/mips/lantiq/clk.c pr_err("clk %s.%s: trying to set invalid rate %ld\n", pr_err 88 arch/mips/lantiq/falcon/sysctrl.c pr_err("module de/activation failed %d %08X %08X %08X\n", pr_err 222 arch/mips/lantiq/falcon/sysctrl.c pr_err("Failed to request core resources"); pr_err 185 arch/mips/lantiq/irq.c pr_err("invalid type %d for irq %ld\n", pr_err 350 arch/mips/lantiq/irq.c pr_err("Failed to request icu%i memory\n", vpe); pr_err 403 arch/mips/lantiq/irq.c pr_err("Failed to request eiu memory"); pr_err 99 arch/mips/lantiq/xway/gptu.c pr_err("gptu: failed to request irq\n"); pr_err 432 arch/mips/lantiq/xway/sysctrl.c pr_err("Failed to request core resources"); pr_err 55 arch/mips/loongson32/common/platform.c pr_err("unable to get %s clock, err=%ld", pr_err 109 arch/mips/loongson32/common/platform.c pr_err("unsupported mii mode %d\n", pr_err 123 arch/mips/loongson32/common/platform.c pr_err("unsupported mii mode %d\n", pr_err 33 arch/mips/loongson64/lemote-2f/pm.c pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." pr_err 44 arch/mips/loongson64/lemote-2f/pm.c pr_err("i8042.c: Failed to enable KBD port.\n"); pr_err 94 arch/mips/loongson64/loongson-3/irq.c pr_err("%s : spurious interrupt\n", __func__); pr_err 49 arch/mips/math-emu/dp_2008class.c pr_err("Unknown class: %d\n", xc); pr_err 49 arch/mips/math-emu/sp_2008class.c pr_err("Unknown class: %d\n", xc); pr_err 322 arch/mips/mm/c-octeon.c pr_err("Core%lu: Cache error exception:\n", coreid); pr_err 323 arch/mips/mm/c-octeon.c pr_err("cp0_errorepc == %lx\n", read_c0_errorepc()); pr_err 325 arch/mips/mm/c-octeon.c pr_err("CacheErr (Icache) == %llx\n", pr_err 330 arch/mips/mm/c-octeon.c pr_err("CacheErr (Dcache) == %llx\n", pr_err 216 arch/mips/mti-malta/malta-time.c pr_err("mti,gic-timer device node not found\n"); pr_err 221 arch/mips/mti-malta/malta-time.c pr_err("error updating gic frequency property\n"); pr_err 902 arch/mips/net/ebpf_jit.c pr_err("ALU64_REG NOT HANDLED\n"); pr_err 988 arch/mips/net/ebpf_jit.c pr_err("ALU_REG NOT HANDLED\n"); pr_err 1506 arch/mips/net/ebpf_jit.c pr_err("NOT HANDLED %d - (%02x)\n", pr_err 294 arch/mips/netlogic/common/irq.c pr_err("PIC %pOFn: reg property not found!\n", node); pr_err 307 arch/mips/netlogic/common/irq.c pr_err("PIC %pOFn: Node mapping for bus %d not found!\n", pr_err 314 arch/mips/netlogic/common/irq.c pr_err("PIC %pOFn: node %d does not exist!\n", pr_err 321 arch/mips/netlogic/common/irq.c pr_err("PIC %pOFn: node %d does not exist!\n", node, socid); pr_err 329 arch/mips/netlogic/common/irq.c pr_err("PIC %pOFn: Creating legacy domain failed!\n", node); pr_err 109 arch/mips/netlogic/xlp/usb-init-xlp2.c pr_err("No matching USB irq!\n"); pr_err 135 arch/mips/netlogic/xlp/usb-init-xlp2.c pr_err("No matching USB irq %d node %d!\n", irq, node); pr_err 195 arch/mips/netlogic/xlp/wakeup.c pr_err("Node %d : timeout core %d\n", n, core); pr_err 208 arch/mips/netlogic/xlp/wakeup.c pr_err("Node 0 : timeout core 0\n"); pr_err 99 arch/mips/netlogic/xlr/fmn-config.c pr_err("ERROR: Bucket %d: credits (%d) > size (%d)\n", pr_err 283 arch/mips/netlogic/xlr/fmn-config.c pr_err("Unknown CPU with processor ID [%d]\n", processor_id); pr_err 284 arch/mips/netlogic/xlr/fmn-config.c pr_err("Error: Cannot initialize FMN credits.\n"); pr_err 245 arch/mips/netlogic/xlr/platform.c pr_err("nlm-i2c: cannot register board I2C devices\n"); pr_err 81 arch/mips/netlogic/xlr/wakeup.c pr_err("Failed to wakeup core %d\n", i); pr_err 135 arch/mips/pci/msi-octeon.c pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one", pr_err 704 arch/mips/pci/pci-octeon.c pr_err("Registration of co_pci_edac failed!\n"); pr_err 120 arch/mips/pci/pci-rc32434.c pr_err("PCI init error!!!\n"); pr_err 198 arch/mips/pci/pci-rt2880.c pr_err("%s:%s[%d] trying to alloc unknown pci irq\n", pr_err 122 arch/mips/pci/pci-virtio-guest.c pr_err("pci_virtio_guest_setup\n"); pr_err 1693 arch/mips/pci/pcie-octeon.c pr_err(" pcie cfg_read retries failed. retry_cnt=%d\n", pr_err 43 arch/mips/pic32/pic32mzda/init.c pr_err("pic32: no DTB found.\n"); pr_err 43 arch/mips/pistachio/time.c pr_err("Failed to get CPU node\n"); pr_err 49 arch/mips/pistachio/time.c pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); pr_err 363 arch/mips/pmcs-msp71xx/msp_prom.c pr_err("Too many ROM DATA regions"); pr_err 121 arch/mips/pmcs-msp71xx/msp_serial.c pr_err("failed to allocate uart private data\n"); pr_err 126 arch/mips/pmcs-msp71xx/msp_serial.c pr_err("Early serial init of port 0 failed\n"); pr_err 152 arch/mips/pmcs-msp71xx/msp_serial.c pr_err("Early serial init of port 1 failed\n"); pr_err 137 arch/mips/ralink/cevt-rt3352.c pr_err("%pOFn: request_irq failed", np); pr_err 63 arch/mips/ralink/ill_acc.c pr_err("%pOFn: failed to lookup pdev\n", np); pr_err 166 arch/mips/ralink/irq.c pr_err("Failed to request intc memory"); pr_err 80 arch/mips/ralink/reset.c pr_err("Failed to find reset controller node"); pr_err 221 arch/mips/txx9/generic/pci.c pr_err("PCI: Failed to allocate resources.\n"); pr_err 554 arch/mips/txx9/generic/setup.c pr_err("Failed to register clocks: %d\n", error); pr_err 71 arch/mips/txx9/generic/setup_tx4927.c pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); pr_err 72 arch/mips/txx9/generic/setup_tx4927.c pr_err("ccfg:%llx, toea:%llx\n", pr_err 73 arch/mips/txx9/generic/setup_tx4938.c pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); pr_err 74 arch/mips/txx9/generic/setup_tx4938.c pr_err("ccfg:%llx, toea:%llx\n", pr_err 77 arch/mips/txx9/generic/setup_tx4939.c pr_err("%cBE exception at %#lx\n", pr_err 79 arch/mips/txx9/generic/setup_tx4939.c pr_err("ccfg:%llx, toea:%llx\n", pr_err 48 arch/mips/txx9/jmr3927/prom.c pr_err("TX3927 TLB off\n"); pr_err 126 arch/mips/txx9/rbtx4938/setup.c pr_err("seeprom: read error.\n"); pr_err 217 arch/mips/txx9/rbtx4938/setup.c pr_err("request resource for fpga failed\n"); pr_err 199 arch/nds32/include/asm/pmu.h pr_err("GET_CONVERTED_EVENT_IDX PFM counter range error\n"); pr_err 216 arch/nds32/include/asm/pmu.h pr_err("GET_CONVERTED_EVENT_HW_NUM PFM counter range error\n"); pr_err 161 arch/nds32/kernel/fpu.c pr_err("BUG: FPU is used in kernel mode.\n"); pr_err 96 arch/nds32/kernel/module.c pr_err("\n%s: relocation type %d out of range.\n" pr_err 99 arch/nds32/kernel/module.c pr_err("section %d reloc %d offset 0x%x relative 0x%x.\n", pr_err 132 arch/nds32/kernel/module.c pr_err("%s: bad relocation\n", module->name); pr_err 133 arch/nds32/kernel/module.c pr_err("section %d reloc %d\n", relindex, i); pr_err 141 arch/nds32/kernel/module.c pr_err("%s: out of bounds relocation\n", module->name); pr_err 142 arch/nds32/kernel/module.c pr_err("section %d reloc %d offset 0x%0x size %d\n", pr_err 250 arch/nds32/kernel/module.c pr_err("%s: unsupported relocation type %d.\n", pr_err 252 arch/nds32/kernel/module.c pr_err pr_err 255 arch/nds32/kernel/module.c pr_err("section %d reloc %d offset 0x%x size %d\n", pr_err 260 arch/nds32/kernel/module.c pr_err("%s: unsupported relocation type %d.\n", pr_err 262 arch/nds32/kernel/module.c pr_err("section %d reloc %d offset 0x%x size %d\n", pr_err 173 arch/nds32/kernel/perf_event_cpu.c pr_err("%s index wrong\n", __func__); pr_err 422 arch/nds32/kernel/perf_event_cpu.c pr_err("CPU enabling wrong pfm counter IRQ enable\n"); pr_err 473 arch/nds32/kernel/perf_event_cpu.c pr_err("CPU disabling wrong pfm counter IRQ enable %d\n", idx); pr_err 503 arch/nds32/kernel/perf_event_cpu.c pr_err("CPU reading wrong counter %d\n", idx); pr_err 516 arch/nds32/kernel/perf_event_cpu.c pr_err pr_err 531 arch/nds32/kernel/perf_event_cpu.c pr_err("CPU writing wrong counter %d\n", idx); pr_err 544 arch/nds32/kernel/perf_event_cpu.c pr_err pr_err 1081 arch/nds32/kernel/perf_event_cpu.c pr_err("no irqs for PMUs defined\n"); pr_err 1089 arch/nds32/kernel/perf_event_cpu.c pr_err("unable to request IRQ%d for NDS PMU counters\n", pr_err 70 arch/nds32/kernel/vdso.c pr_err("vDSO is not a valid ELF object!\n"); pr_err 266 arch/nios2/include/asm/pgtable.h pr_err("%s:%d: bad pte %08lx.\n", \ pr_err 269 arch/nios2/include/asm/pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", \ pr_err 20 arch/nios2/kernel/cpuinfo.c pr_err("ERROR: Nios II " x " different for kernel and DTS\n") pr_err 155 arch/nios2/kernel/misaligned.c pr_err("fault during kernel misaligned fixup @ %#lx; addr 0x%08x; isn=0x%08x\n", pr_err 159 arch/nios2/kernel/misaligned.c pr_err("fault during user misaligned fixup @ %#lx; isn=%08x addr=0x%08x sp=0x%08lx pid=%d\n", pr_err 177 arch/nios2/kernel/misaligned.c pr_err("kernel unaligned access @ %#lx; BADADDR 0x%08x; cause=%d, isn=0x%08x\n", pr_err 193 arch/nios2/kernel/misaligned.c pr_err("user unaligned access @ %#lx; isn=0x%08lx ea=0x%08lx ra=0x%08lx sp=0x%08lx\n", pr_err 81 arch/nios2/kernel/module.c pr_err("module %s: relocation overflow\n", pr_err 91 arch/nios2/kernel/module.c pr_err("module %s: dangerous relocation\n", pr_err 96 arch/nios2/kernel/module.c pr_err("module %s: relocation overflow\n", pr_err 124 arch/nios2/kernel/module.c pr_err("module %s: Unknown reloc: %u\n", pr_err 40 arch/nios2/mm/ioremap.c pr_err("remap_area_pte: page already exists\n"); pr_err 184 arch/nios2/mm/ioremap.c pr_err("iounmap: bad address %p\n", addr); pr_err 59 arch/openrisc/kernel/module.c pr_err("module %s: Unknown relocation: %u\n", pr_err 512 arch/parisc/kernel/drivers.c pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n" pr_err 797 arch/parisc/kernel/perf.c pr_err("perf_write_image: ioremap failed!\n"); pr_err 44 arch/powerpc/crypto/crc-vpmsum_test.c pr_err("Error allocating crc-t10dif\n"); pr_err 51 arch/powerpc/crypto/crc-vpmsum_test.c pr_err("Error allocating crc32c\n"); pr_err 63 arch/powerpc/crypto/crc-vpmsum_test.c pr_err("Error initing crc-t10dif\n"); pr_err 72 arch/powerpc/crypto/crc-vpmsum_test.c pr_err("Error initing crc32c\n"); pr_err 92 arch/powerpc/crypto/crc-vpmsum_test.c pr_err("FAILURE in CRC16: got 0x%04x expected 0x%04x (len %lu)\n", pr_err 102 arch/powerpc/crypto/crc-vpmsum_test.c pr_err("FAILURE in CRC32: got 0x%08x expected 0x%08x (len %lu)\n", pr_err 206 arch/powerpc/include/asm/book3s/32/pgtable.h pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ pr_err 209 arch/powerpc/include/asm/book3s/32/pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err 1029 arch/powerpc/include/asm/book3s/64/pgtable.h pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) pr_err 1031 arch/powerpc/include/asm/book3s/64/pgtable.h pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) pr_err 1033 arch/powerpc/include/asm/book3s/64/pgtable.h pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) pr_err 1035 arch/powerpc/include/asm/book3s/64/pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err 60 arch/powerpc/include/asm/nohash/32/pgtable.h pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ pr_err 63 arch/powerpc/include/asm/nohash/32/pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err 86 arch/powerpc/include/asm/nohash/64/pgtable-4k.h pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) pr_err 336 arch/powerpc/include/asm/nohash/64/pgtable.h pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) pr_err 338 arch/powerpc/include/asm/nohash/64/pgtable.h pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) pr_err 340 arch/powerpc/include/asm/nohash/64/pgtable.h pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err 186 arch/powerpc/kernel/dt_cpu_ftrs.c pr_err("%s could not advertise to user (no hwcap bits)\n", f->name); pr_err 219 arch/powerpc/kernel/dt_cpu_ftrs.c pr_err("CPU feature: %s could not advertise to user (no hwcap bits)\n", f->name); pr_err 235 arch/powerpc/kernel/dt_cpu_ftrs.c pr_err("CPU feature hypervisor present in device tree but HV mode not enabled in the CPU. Ignoring.\n"); pr_err 760 arch/powerpc/kernel/dt_cpu_ftrs.c pr_err("hypervisor not present in device tree but HV mode is enabled in the CPU. Enabling.\n"); pr_err 560 arch/powerpc/kernel/eeh.c pr_err("EEH: Failure of PHB#%x-PE#%x will be handled at parent PHB#%x-PE#%x.\n", pr_err 818 arch/powerpc/kernel/eeh.c pr_err("%s: No PE found on PCI device %s\n", pr_err 1902 arch/powerpc/kernel/eeh.c pr_err("%s: expected 4 args, got %d\n", __func__, ret); pr_err 2042 arch/powerpc/kernel/eeh.c pr_err("%s: expected 4 args, got %d\n", __func__, ret); pr_err 867 arch/powerpc/kernel/eeh_driver.c pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n", pr_err 894 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: Recovering PHB#%x, location: %s\n", pr_err 899 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: Recovering PHB#%x-PE#%x\n", pr_err 901 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: PE location: %s, PHB location: %s\n", pr_err 914 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: Frozen PHB#%x-PE#%x detected\n", pr_err 918 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: Call Trace:\n"); pr_err 920 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: [%pK] %pS\n", ptrs[i], ptrs[i]); pr_err 929 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: PHB#%x-PE#%x has failed %d times in the last hour and has been permanently disabled.\n", pr_err 1081 arch/powerpc/kernel/eeh_driver.c pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n" pr_err 1224 arch/powerpc/kernel/eeh_driver.c pr_err("%s: Cannot find PCI bus for " pr_err 86 arch/powerpc/kernel/eeh_event.c pr_err("%s: Failed to start EEH daemon (%d)\n", pr_err 109 arch/powerpc/kernel/eeh_event.c pr_err("EEH: out of memory, event not handled\n"); pr_err 150 arch/powerpc/kernel/eeh_event.c pr_err("EEH: Event dropped due to no_recover setting\n"); pr_err 86 arch/powerpc/kernel/eeh_pe.c pr_err("%s: out of memory!\n", __func__); pr_err 423 arch/powerpc/kernel/eeh_pe.c pr_err("%s: out of memory!\n", __func__); pr_err 439 arch/powerpc/kernel/eeh_pe.c pr_err("%s: No PHB PE is found (PHB Domain=%d)\n", pr_err 83 arch/powerpc/kernel/fadump.c pr_err("Failed to init cma area for firmware-assisted dump,%d\n", rc); pr_err 464 arch/powerpc/kernel/fadump.c pr_err("Can't enable fadump with boot memory size (0x%lx) less than 0x%llx\n", pr_err 470 arch/powerpc/kernel/fadump.c pr_err("Too many holes in boot memory area to enable fadump\n"); pr_err 533 arch/powerpc/kernel/fadump.c pr_err("Failed to find memory chunk for reservation!\n"); pr_err 547 arch/powerpc/kernel/fadump.c pr_err("Failed to reserve memory!\n"); pr_err 705 arch/powerpc/kernel/fadump.c pr_err("Failed to allocate %ld bytes for CPU notes buffer\n", pr_err 750 arch/powerpc/kernel/fadump.c pr_err("Insufficient memory for setting up %s memory ranges\n", pr_err 189 arch/powerpc/kernel/io-workarounds.c pr_err("IOWA:Too many pci bridges, " pr_err 1065 arch/powerpc/kernel/iommu.c pr_err("iommu_tce: it_map is not empty"); pr_err 608 arch/powerpc/kernel/irq.c pr_err("do_IRQ: stack overflow: %ld\n", sp); pr_err 57 arch/powerpc/kernel/kexec_elf_64.c pr_err("Loading purgatory failed.\n"); pr_err 80 arch/powerpc/kernel/kexec_elf_64.c pr_err("Not enough memory for the device tree.\n"); pr_err 86 arch/powerpc/kernel/kexec_elf_64.c pr_err("Error setting up the new device tree.\n"); pr_err 113 arch/powerpc/kernel/kexec_elf_64.c pr_err("Error setting up the purgatory.\n"); pr_err 192 arch/powerpc/kernel/machine_kexec.c pr_err("Failed to reserve memory for crashkernel!\n"); pr_err 104 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Malformed device tree.\n"); pr_err 111 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error deleting device tree reservation.\n"); pr_err 153 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error creating /chosen.\n"); pr_err 157 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Malformed device tree: error reading /chosen.\n"); pr_err 170 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Malformed device tree.\n"); pr_err 194 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error deleting linux,initrd-start.\n"); pr_err 200 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error deleting linux,initrd-end.\n"); pr_err 221 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error reserving initrd memory: %s\n", pr_err 234 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error deleting bootargs.\n"); pr_err 241 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error setting up the new device tree.\n"); pr_err 252 arch/powerpc/kernel/machine_kexec_file_64.c pr_err("Error setting up the new device tree.\n"); pr_err 389 arch/powerpc/kernel/mce.c pr_err("Machine Check Exception, Unknown event version %d !\n", pr_err 149 arch/powerpc/kernel/module_32.c pr_err("Module doesn't contain .plt or .init.plt sections.\n"); pr_err 287 arch/powerpc/kernel/module_32.c pr_err("%s: unknown ADD relocation: %u\n", pr_err 156 arch/powerpc/kernel/module_64.c pr_err("%s: stub %lx not in module %s\n", __func__, addr, mod->name); pr_err 163 arch/powerpc/kernel/module_64.c pr_err("%s: fault reading magic for stub %lx for %s\n", __func__, addr, mod->name); pr_err 168 arch/powerpc/kernel/module_64.c pr_err("%s: bad magic for stub %lx for %s\n", __func__, addr, mod->name); pr_err 173 arch/powerpc/kernel/module_64.c pr_err("%s: fault reading funcdata for stub %lx for %s\n", __func__, addr, mod->name); pr_err 371 arch/powerpc/kernel/module_64.c pr_err("%s: doesn't contain .stubs.\n", me->name); pr_err 411 arch/powerpc/kernel/module_64.c pr_err("%s: Address %p of stub out of range of %p.\n", pr_err 513 arch/powerpc/kernel/module_64.c pr_err("%s: Expected nop after call, got %08x at %pS\n", pr_err 582 arch/powerpc/kernel/module_64.c pr_err("%s: bad TOC16 relocation (0x%lx)\n", pr_err 603 arch/powerpc/kernel/module_64.c pr_err("%s: bad TOC16_DS relocation (0x%lx)\n", pr_err 616 arch/powerpc/kernel/module_64.c pr_err("%s: bad TOC16_LO_DS relocation (0x%lx)\n", pr_err 653 arch/powerpc/kernel/module_64.c pr_err("%s: REL24 %li out of range!\n", pr_err 674 arch/powerpc/kernel/module_64.c pr_err("%s: REL32 %li out of range!\n", pr_err 737 arch/powerpc/kernel/module_64.c pr_err("%s: Unknown ADD relocation: %lu\n", pr_err 793 arch/powerpc/kernel/module_64.c pr_err("%s: Unable to find a free slot for ftrace stub.\n", me->name); pr_err 802 arch/powerpc/kernel/module_64.c pr_err("%s: Address of %ps out of range of kernel_toc.\n", pr_err 202 arch/powerpc/kernel/nvram_64.c pr_err("%s: Failed nvram_write (%d)\n", __func__, rc); pr_err 208 arch/powerpc/kernel/nvram_64.c pr_err("%s: Failed nvram_write (%d)\n", __func__, rc); pr_err 238 arch/powerpc/kernel/nvram_64.c pr_err("%s: Failed nvram_read (%d)\n", __func__, rc); pr_err 245 arch/powerpc/kernel/nvram_64.c pr_err("%s: Failed nvram_read (%d)\n", __func__, rc); pr_err 306 arch/powerpc/kernel/nvram_64.c pr_err("nvram: Failed to find or create %s" pr_err 359 arch/powerpc/kernel/nvram_64.c pr_err("nvram: compression failed; returned %d\n", zipped_len); pr_err 360 arch/powerpc/kernel/nvram_64.c pr_err("nvram: logging uncompressed oops/panic report\n"); pr_err 478 arch/powerpc/kernel/nvram_64.c pr_err("nvram: Failed to find partition %s, " pr_err 559 arch/powerpc/kernel/nvram_64.c pr_err("nvram: pstore_register() failed, returned %d. " pr_err 579 arch/powerpc/kernel/nvram_64.c pr_err("nvram: Failed to initialize oops partition!"); pr_err 588 arch/powerpc/kernel/nvram_64.c pr_err("nvram: Failed to initialize oops partition!"); pr_err 594 arch/powerpc/kernel/nvram_64.c pr_err("nvram: No memory for %s partition\n", pr_err 617 arch/powerpc/kernel/nvram_64.c pr_err("nvram: No memory for compression workspace; " pr_err 624 arch/powerpc/kernel/nvram_64.c pr_err("No memory for uncompressed %s data; " pr_err 631 arch/powerpc/kernel/nvram_64.c pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc); pr_err 674 arch/powerpc/kernel/nvram_64.c pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n", pr_err 895 arch/powerpc/kernel/nvram_64.c pr_err("%s: kmalloc failed\n", __func__); pr_err 907 arch/powerpc/kernel/nvram_64.c pr_err("%s: nvram_write_header failed (%d)\n", __func__, rc); pr_err 920 arch/powerpc/kernel/nvram_64.c pr_err("%s: nvram_write_header failed (%d)\n", pr_err 935 arch/powerpc/kernel/nvram_64.c pr_err("%s: nvram_write failed (%d)\n", pr_err 1616 arch/powerpc/kernel/pci-common.c pr_err("Failed to create bus for PCI domain %04x\n", pr_err 79 arch/powerpc/kernel/proc_powerpc.c pr_err("Failed to create link /proc/ppc64 -> /proc/powerpc\n"); pr_err 979 arch/powerpc/kernel/rtas.c pr_err("%s: Could not bring present CPUs online.\n", __func__); pr_err 632 arch/powerpc/kernel/setup-common.c pr_err("No suitable machine description found !\n"); pr_err 1031 arch/powerpc/kernel/smp.c pr_err("smp: failed starting cpu %d (rc %d)\n", cpu, rc); pr_err 75 arch/powerpc/kernel/trace/ftrace.c pr_err("%p: replaced (%#x) != old (%#x)", pr_err 132 arch/powerpc/kernel/trace/ftrace.c pr_err("Fetching opcode failed.\n"); pr_err 138 arch/powerpc/kernel/trace/ftrace.c pr_err("Not expected bl: opcode is %x\n", op); pr_err 148 arch/powerpc/kernel/trace/ftrace.c pr_err("Failed to get trampoline target\n"); pr_err 157 arch/powerpc/kernel/trace/ftrace.c pr_err("addr %lx does not match expected %lx\n", ptr, entry); pr_err 166 arch/powerpc/kernel/trace/ftrace.c pr_err("Fetching instruction at %lx failed.\n", ip - 4); pr_err 172 arch/powerpc/kernel/trace/ftrace.c pr_err("Unexpected instruction %08x around bl _mcount\n", op); pr_err 197 arch/powerpc/kernel/trace/ftrace.c pr_err("Fetching op failed.\n"); pr_err 202 arch/powerpc/kernel/trace/ftrace.c pr_err("Expected %08x found %08x\n", PPC_INST_LD_TOC, op); pr_err 208 arch/powerpc/kernel/trace/ftrace.c pr_err("Patching NOP failed.\n"); pr_err 230 arch/powerpc/kernel/trace/ftrace.c pr_err("Not expected bl: opcode is %x\n", op); pr_err 249 arch/powerpc/kernel/trace/ftrace.c pr_err("Failed to read %lx\n", tramp); pr_err 260 arch/powerpc/kernel/trace/ftrace.c pr_err("Not a trampoline\n"); pr_err 272 arch/powerpc/kernel/trace/ftrace.c pr_err("Trampoline location %08lx does not match addr\n", pr_err 395 arch/powerpc/kernel/trace/ftrace.c pr_err("Fetching opcode failed.\n"); pr_err 401 arch/powerpc/kernel/trace/ftrace.c pr_err("Not expected bl: opcode is %x\n", op); pr_err 413 arch/powerpc/kernel/trace/ftrace.c pr_err("No ftrace trampolines reachable from %ps\n", pr_err 420 arch/powerpc/kernel/trace/ftrace.c pr_err("Patching NOP failed.\n"); pr_err 454 arch/powerpc/kernel/trace/ftrace.c pr_err("No module loaded addr=%lx\n", addr); pr_err 460 arch/powerpc/kernel/trace/ftrace.c pr_err("Record mod %p not equal to passed in mod %p\n", pr_err 523 arch/powerpc/kernel/trace/ftrace.c pr_err("Unexpected call sequence at %p: %x %x\n", pr_err 534 arch/powerpc/kernel/trace/ftrace.c pr_err("No ftrace trampoline\n"); pr_err 546 arch/powerpc/kernel/trace/ftrace.c pr_err("Failed to get trampoline target\n"); pr_err 555 arch/powerpc/kernel/trace/ftrace.c pr_err("addr %lx does not match expected %lx\n", ptr, entry); pr_err 561 arch/powerpc/kernel/trace/ftrace.c pr_err("Branch out of range\n"); pr_err 566 arch/powerpc/kernel/trace/ftrace.c pr_err("REL24 out of range!\n"); pr_err 586 arch/powerpc/kernel/trace/ftrace.c pr_err("Expected NOP but have %x\n", op); pr_err 592 arch/powerpc/kernel/trace/ftrace.c pr_err("No ftrace trampoline\n"); pr_err 600 arch/powerpc/kernel/trace/ftrace.c pr_err("REL24 out of range!\n"); pr_err 629 arch/powerpc/kernel/trace/ftrace.c pr_err("Unknown ftrace addr to patch: %ps\n", (void *)ptr); pr_err 638 arch/powerpc/kernel/trace/ftrace.c pr_err("Unable to read ftrace location %p\n", ip); pr_err 643 arch/powerpc/kernel/trace/ftrace.c pr_err("Unexpected call sequence at %p: %x\n", ip, op); pr_err 649 arch/powerpc/kernel/trace/ftrace.c pr_err("No ftrace trampolines reachable from %ps\n", ip); pr_err 654 arch/powerpc/kernel/trace/ftrace.c pr_err("Error patching branch to ftrace tramp!\n"); pr_err 686 arch/powerpc/kernel/trace/ftrace.c pr_err("No module loaded\n"); pr_err 710 arch/powerpc/kernel/trace/ftrace.c pr_err("No ftrace trampoline\n"); pr_err 716 arch/powerpc/kernel/trace/ftrace.c pr_err("Fetching opcode failed.\n"); pr_err 722 arch/powerpc/kernel/trace/ftrace.c pr_err("Not expected bl: opcode is %x\n", op); pr_err 735 arch/powerpc/kernel/trace/ftrace.c pr_err("Failed to get trampoline target\n"); pr_err 743 arch/powerpc/kernel/trace/ftrace.c pr_err("addr %lx does not match expected %lx\n", ptr, entry); pr_err 752 arch/powerpc/kernel/trace/ftrace.c pr_err("REL24 out of range!\n"); pr_err 765 arch/powerpc/kernel/trace/ftrace.c pr_err("Failed to get trampoline target\n"); pr_err 774 arch/powerpc/kernel/trace/ftrace.c pr_err("addr %lx does not match expected %lx\n", ptr, entry); pr_err 780 arch/powerpc/kernel/trace/ftrace.c pr_err("Branch out of range\n"); pr_err 785 arch/powerpc/kernel/trace/ftrace.c pr_err("REL24 out of range!\n"); pr_err 822 arch/powerpc/kernel/trace/ftrace.c pr_err("No module loaded\n"); pr_err 890 arch/powerpc/kernel/trace/ftrace.c pr_err("Address of %ps out of range of kernel_toc.\n", pr_err 1762 arch/powerpc/kernel/traps.c pr_err("Failed to fetch the user instruction\n"); pr_err 1780 arch/powerpc/kernel/traps.c pr_err("DSCR based mfspr emulation failed\n"); pr_err 249 arch/powerpc/kvm/book3s_64_mmu_hv.c pr_err("KVM: map_vrma at %lx failed, ret=%ld\n", pr_err 303 arch/powerpc/kvm/book3s_64_mmu_hv.c pr_err("KVM: Oops, kvmppc_h_enter returned too hard!\n"); pr_err 1919 arch/powerpc/kvm/book3s_64_mmu_hv.c pr_err("kvm_htab_write ret %ld i=%ld v=%lx " pr_err 320 arch/powerpc/kvm/book3s_64_mmu_radix.c pr_err("KVM: TLB page invalidation hcall failed, rc=%ld\n", rc); pr_err 335 arch/powerpc/kvm/book3s_64_mmu_radix.c pr_err("KVM: TLB PWC invalidation hcall failed, rc=%ld\n", rc); pr_err 901 arch/powerpc/kvm/book3s_64_mmu_radix.c pr_err("KVM: Got unsupported MMU fault\n"); pr_err 906 arch/powerpc/kvm/book3s_64_mmu_radix.c pr_err("KVM: Got radix HV page fault with DSISR=%lx\n", dsisr); pr_err 41 arch/powerpc/kvm/book3s_64_vio_hv.c pr_err("WARN_ON_ONCE_RM: (%s) at %s:%u\n", \ pr_err 418 arch/powerpc/kvm/book3s_hv.c pr_err("vcpu %p (%d):\n", vcpu, vcpu->vcpu_id); pr_err 419 arch/powerpc/kvm/book3s_hv.c pr_err("pc = %.16lx msr = %.16llx trap = %x\n", pr_err 422 arch/powerpc/kvm/book3s_hv.c pr_err("r%2d = %.16lx r%d = %.16lx\n", pr_err 425 arch/powerpc/kvm/book3s_hv.c pr_err("ctr = %.16lx lr = %.16lx\n", pr_err 427 arch/powerpc/kvm/book3s_hv.c pr_err("srr0 = %.16llx srr1 = %.16llx\n", pr_err 429 arch/powerpc/kvm/book3s_hv.c pr_err("sprg0 = %.16llx sprg1 = %.16llx\n", pr_err 431 arch/powerpc/kvm/book3s_hv.c pr_err("sprg2 = %.16llx sprg3 = %.16llx\n", pr_err 433 arch/powerpc/kvm/book3s_hv.c pr_err("cr = %.8lx xer = %.16lx dsisr = %.8x\n", pr_err 435 arch/powerpc/kvm/book3s_hv.c pr_err("dar = %.16llx\n", vcpu->arch.shregs.dar); pr_err 436 arch/powerpc/kvm/book3s_hv.c pr_err("fault dar = %.16lx dsisr = %.8x\n", pr_err 438 arch/powerpc/kvm/book3s_hv.c pr_err("SLB (%d entries):\n", vcpu->arch.slb_max); pr_err 440 arch/powerpc/kvm/book3s_hv.c pr_err(" ESID = %.16llx VSID = %.16llx\n", pr_err 442 arch/powerpc/kvm/book3s_hv.c pr_err("lpcr = %.16lx sdr1 = %.16lx last_inst = %.8x\n", pr_err 2514 arch/powerpc/kvm/book3s_hv.c pr_err("KVM: couldn't grab cpu %d\n", cpu); pr_err 2650 arch/powerpc/kvm/book3s_hv.c pr_err("KVM: CPU %d seems to be stuck\n", cpu + i); pr_err 4600 arch/powerpc/kvm/book3s_hv.c pr_err("KVM: Couldn't alloc HPT\n"); pr_err 5485 arch/powerpc/kvm/book3s_hv.c pr_err("KVM-HV: Host does not support TLBIE\n"); pr_err 5516 arch/powerpc/kvm/book3s_hv.c pr_err("KVM-HV: Cannot determine method for accessing XICS\n"); pr_err 365 arch/powerpc/kvm/book3s_hv_nested.c pr_err("kvm-hv: failed to allocated nested partition table\n"); pr_err 372 arch/powerpc/kvm/book3s_hv_nested.c pr_err("kvm-hv: Parent hypervisor does not support nesting (rc=%ld)\n", pr_err 408 arch/powerpc/kvm/book3s_hv_nested.c pr_err("KVM: TLB LPID invalidation hcall failed, rc=%ld\n", rc); pr_err 1326 arch/powerpc/kvm/book3s_hv_nested.c pr_err("KVM: L1 guest page shift (%d) less than our own (%d)\n", pr_err 1023 arch/powerpc/kvm/book3s_xics.c pr_err("%s: no memory for name\n", __func__); pr_err 190 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to map escalation interrupt for queue %d of VCPU %d\n", pr_err 202 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to allocate escalation irq name for queue %d of VCPU %d\n", pr_err 213 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to request escalation interrupt for queue %d of VCPU %d\n", pr_err 259 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to allocate queue %d for VCPU %d\n", pr_err 275 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to configure queue %d for VCPU %d\n", pr_err 934 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to set VCPU affinity for irq %d\n", host_irq); pr_err 1034 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to clr VCPU affinity for irq %d\n", host_irq); pr_err 1272 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to allocate xive irq for VCPU IPI\n"); pr_err 1288 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to enable VP in OPAL, err %d\n", r); pr_err 1318 arch/powerpc/kvm/book3s_xive.c pr_err("Failed to configure queue %d for VCPU %d\n", pr_err 1363 arch/powerpc/kvm/book3s_xive.c pr_err("invalid irq 0x%x in cpu queue!\n", irq); pr_err 1373 arch/powerpc/kvm/book3s_xive.c pr_err("Interrupt 0x%x is marked in a queue but P not set !\n", irq); pr_err 2148 arch/powerpc/kvm/book3s_xive.c pr_err("%s: no memory for name\n", __func__); pr_err 170 arch/powerpc/kvm/book3s_xive_native.c pr_err("Failed to get VP info from OPAL: %d\n", rc); pr_err 180 arch/powerpc/kvm/book3s_xive_native.c pr_err("Failed to enable VP in OPAL: %d\n", rc); pr_err 267 arch/powerpc/kvm/book3s_xive_native.c pr_err("%s: accessing invalid ESB page for source %lx !\n", pr_err 351 arch/powerpc/kvm/book3s_xive_native.c pr_err("Failed to create block...\n"); pr_err 358 arch/powerpc/kvm/book3s_xive_native.c pr_err("fault getting user info !\n"); pr_err 371 arch/powerpc/kvm/book3s_xive_native.c pr_err("Failed to allocate IRQ !\n"); pr_err 492 arch/powerpc/kvm/book3s_xive_native.c pr_err("invalid priority for queue %d for VCPU %d\n", pr_err 582 arch/powerpc/kvm/book3s_xive_native.c pr_err("Can't find server %d\n", server); pr_err 588 arch/powerpc/kvm/book3s_xive_native.c pr_err("Trying to restore invalid queue %d for VCPU %d\n", pr_err 606 arch/powerpc/kvm/book3s_xive_native.c pr_err("Failed to reset queue %d for VCPU %d: %d\n", pr_err 622 arch/powerpc/kvm/book3s_xive_native.c pr_err("invalid flags %d\n", kvm_eq.flags); pr_err 628 arch/powerpc/kvm/book3s_xive_native.c pr_err("invalid queue size %d\n", kvm_eq.qshift); pr_err 633 arch/powerpc/kvm/book3s_xive_native.c pr_err("queue page is not aligned %llx/%llx\n", kvm_eq.qaddr, pr_err 651 arch/powerpc/kvm/book3s_xive_native.c pr_err("Couldn't get queue page %llx!\n", kvm_eq.qaddr); pr_err 673 arch/powerpc/kvm/book3s_xive_native.c pr_err("Failed to configure queue %d for VCPU %d: %d\n", pr_err 727 arch/powerpc/kvm/book3s_xive_native.c pr_err("Can't find server %d\n", server); pr_err 733 arch/powerpc/kvm/book3s_xive_native.c pr_err("invalid priority for queue %d for VCPU %d\n", pr_err 1254 arch/powerpc/kvm/book3s_xive_native.c pr_err("%s: no memory for name\n", __func__); pr_err 452 arch/powerpc/kvm/e500_mmu_host.c pr_err("%s: real page not found for gfn %lx\n", pr_err 778 arch/powerpc/kvm/e500_mmu_host.c pr_err("%s: need to know host tlb size\n", __func__); pr_err 790 arch/powerpc/kvm/e500_mmu_host.c pr_err("%s: bad tlb0 host config: %u entries %u ways\n", pr_err 1146 arch/powerpc/kvm/mpic.c pr_err("%s: bad raised IRQ %d ctpr %d ivpr 0x%08x\n", pr_err 2437 arch/powerpc/kvm/powerpc.c pr_err("%s: No LPIDs free\n", __func__); pr_err 474 arch/powerpc/mm/book3s64/hash_utils.c pr_err("Invalid penc for base_shift=%d " pr_err 2003 arch/powerpc/mm/book3s64/hash_utils.c pr_err("lpar: unable to create hpt_order debugsfs file\n"); pr_err 483 arch/powerpc/mm/book3s64/pgtable.c pr_err("disable_tlbie: Unable to disable TLBIE with Hash MMU.\n"); pr_err 218 arch/powerpc/mm/book3s64/slb.c pr_err("SLB contents of cpu 0x%x\n", smp_processor_id()); pr_err 219 arch/powerpc/mm/book3s64/slb.c pr_err("Last SLB entry inserted at slot %d\n", get_paca()->stab_rr); pr_err 229 arch/powerpc/mm/book3s64/slb.c pr_err("%02d %016lx %016lx\n", i, e, v); pr_err 232 arch/powerpc/mm/book3s64/slb.c pr_err("\n"); pr_err 237 arch/powerpc/mm/book3s64/slb.c pr_err(" 1T ESID=%9lx VSID=%13lx LLP:%3lx\n", pr_err 241 arch/powerpc/mm/book3s64/slb.c pr_err(" 256M ESID=%9lx VSID=%13lx LLP:%3lx\n", pr_err 246 arch/powerpc/mm/book3s64/slb.c pr_err("----------------------------------\n"); pr_err 249 arch/powerpc/mm/book3s64/slb.c pr_err("SLB cache ptr value = %d\n", get_paca()->slb_save_cache_ptr); pr_err 250 arch/powerpc/mm/book3s64/slb.c pr_err("Valid SLB cache entries:\n"); pr_err 253 arch/powerpc/mm/book3s64/slb.c pr_err("%02d EA[0-35]=%9x\n", i, get_paca()->slb_cache[i]); pr_err 254 arch/powerpc/mm/book3s64/slb.c pr_err("Rest of SLB cache entries:\n"); pr_err 256 arch/powerpc/mm/book3s64/slb.c pr_err("%02d EA[0-35]=%9x\n", i, get_paca()->slb_cache[i]); pr_err 153 arch/powerpc/mm/fault.c pr_err("MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n", pr_err 594 arch/powerpc/mm/hugetlbpage.c pr_err("Invalid huge page size specified(%llu)\n", size); pr_err 241 arch/powerpc/mm/nohash/mmu_context.c pr_err("MMU: Context %d is %s and MM is %p !\n", pr_err 247 arch/powerpc/mm/nohash/mmu_context.c pr_err("MMU: Free context count out of sync ! (%d vs %d)\n", pr_err 252 arch/powerpc/mm/nohash/mmu_context.c pr_err("MMU: More active contexts than CPUs ! (%d vs %d)\n", pr_err 255 arch/powerpc/mm/nohash/mmu_context.c pr_err("MMU: Context 0 has been freed !!!\n"); pr_err 293 arch/powerpc/mm/nohash/mmu_context.c pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n", pr_err 539 arch/powerpc/net/bpf_jit_comp.c pr_err("BPF filter opcode %04x (@%d) unsupported\n", pr_err 84 arch/powerpc/net/bpf_jit_comp64.c pr_err("BPF JIT is asking about unknown registers"); pr_err 718 arch/powerpc/perf/hv-24x7.c pr_err("invalid page count: %zu\n", catalog_page_len); pr_err 736 arch/powerpc/perf/hv-24x7.c pr_err("invalid event data offs %zu and/or len %zu\n", pr_err 743 arch/powerpc/perf/hv-24x7.c pr_err("event data %zu-%zu does not fit inside catalog 0-%zu\n", pr_err 752 arch/powerpc/perf/hv-24x7.c pr_err("event_entry_count %zu is invalid\n", event_entry_count); pr_err 765 arch/powerpc/perf/hv-24x7.c pr_err("could not allocate event data\n"); pr_err 784 arch/powerpc/perf/hv-24x7.c pr_err("Failed to get event data in page %zu: rc=%ld\n", pr_err 973 arch/powerpc/perf/hv-24x7.c pr_err("h_get_24x7_catalog_page(ver=%lld, page=%lld) failed:" pr_err 1212 arch/powerpc/perf/hv-24x7.c pr_err("Error: result of request %hhu has %hu elements\n", pr_err 477 arch/powerpc/perf/imc-pmu.c pr_err("nest-imc: Unable to stop the counters for core %d\n", node_id); pr_err 556 arch/powerpc/perf/imc-pmu.c pr_err("nest-imc: Unable to start the counters for node %d\n", pr_err 754 arch/powerpc/perf/imc-pmu.c pr_err("IMC: Unable to stop the counters for core %d\n", core_id); pr_err 814 arch/powerpc/perf/imc-pmu.c pr_err("core-imc: Unable to start the counters for core %d\n", pr_err 1050 arch/powerpc/perf/imc-pmu.c pr_err("thread-imc: Unable to start the counter\ pr_err 1077 arch/powerpc/perf/imc-pmu.c pr_err("thread-imc: Unable to stop the counters\ pr_err 1244 arch/powerpc/perf/imc-pmu.c pr_err("trace-imc: Unable to start the counters for core %d\n", core_id); pr_err 1293 arch/powerpc/perf/imc-pmu.c pr_err("trace-imc: Unable to stop the counters for core %d\n", core_id); pr_err 47 arch/powerpc/platforms/44x/fsp2.c pr_err("L2 Controller:\n"); pr_err 48 arch/powerpc/platforms/44x/fsp2.c pr_err("MCK: 0x%08x\n", mfl2(L2MCK)); pr_err 49 arch/powerpc/platforms/44x/fsp2.c pr_err("INT: 0x%08x\n", mfl2(L2INT)); pr_err 50 arch/powerpc/platforms/44x/fsp2.c pr_err("PLBSTAT0: 0x%08x\n", mfl2(L2PLBSTAT0)); pr_err 51 arch/powerpc/platforms/44x/fsp2.c pr_err("PLBSTAT1: 0x%08x\n", mfl2(L2PLBSTAT1)); pr_err 52 arch/powerpc/platforms/44x/fsp2.c pr_err("ARRSTAT0: 0x%08x\n", mfl2(L2ARRSTAT0)); pr_err 53 arch/powerpc/platforms/44x/fsp2.c pr_err("ARRSTAT1: 0x%08x\n", mfl2(L2ARRSTAT1)); pr_err 54 arch/powerpc/platforms/44x/fsp2.c pr_err("ARRSTAT2: 0x%08x\n", mfl2(L2ARRSTAT2)); pr_err 55 arch/powerpc/platforms/44x/fsp2.c pr_err("CPUSTAT: 0x%08x\n", mfl2(L2CPUSTAT)); pr_err 56 arch/powerpc/platforms/44x/fsp2.c pr_err("RACSTAT0: 0x%08x\n", mfl2(L2RACSTAT0)); pr_err 57 arch/powerpc/platforms/44x/fsp2.c pr_err("WACSTAT0: 0x%08x\n", mfl2(L2WACSTAT0)); pr_err 58 arch/powerpc/platforms/44x/fsp2.c pr_err("WACSTAT1: 0x%08x\n", mfl2(L2WACSTAT1)); pr_err 59 arch/powerpc/platforms/44x/fsp2.c pr_err("WACSTAT2: 0x%08x\n", mfl2(L2WACSTAT2)); pr_err 60 arch/powerpc/platforms/44x/fsp2.c pr_err("WDFSTAT: 0x%08x\n", mfl2(L2WDFSTAT)); pr_err 61 arch/powerpc/platforms/44x/fsp2.c pr_err("LOG0: 0x%08x\n", mfl2(L2LOG0)); pr_err 62 arch/powerpc/platforms/44x/fsp2.c pr_err("LOG1: 0x%08x\n", mfl2(L2LOG1)); pr_err 63 arch/powerpc/platforms/44x/fsp2.c pr_err("LOG2: 0x%08x\n", mfl2(L2LOG2)); pr_err 64 arch/powerpc/platforms/44x/fsp2.c pr_err("LOG3: 0x%08x\n", mfl2(L2LOG3)); pr_err 65 arch/powerpc/platforms/44x/fsp2.c pr_err("LOG4: 0x%08x\n", mfl2(L2LOG4)); pr_err 66 arch/powerpc/platforms/44x/fsp2.c pr_err("LOG5: 0x%08x\n", mfl2(L2LOG5)); pr_err 71 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLBOPB Bridge %d:\n", num); pr_err 72 arch/powerpc/platforms/44x/fsp2.c pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0)); pr_err 73 arch/powerpc/platforms/44x/fsp2.c pr_err("GESR1: 0x%08x\n", mfdcr(base + PLB4OPB_GESR1)); pr_err 74 arch/powerpc/platforms/44x/fsp2.c pr_err("GESR2: 0x%08x\n", mfdcr(base + PLB4OPB_GESR2)); pr_err 75 arch/powerpc/platforms/44x/fsp2.c pr_err("GEARU: 0x%08x\n", mfdcr(base + PLB4OPB_GEARU)); pr_err 76 arch/powerpc/platforms/44x/fsp2.c pr_err("GEAR: 0x%08x\n", mfdcr(base + PLB4OPB_GEAR)); pr_err 81 arch/powerpc/platforms/44x/fsp2.c pr_err("Bus Error\n"); pr_err 85 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLB6 Controller:\n"); pr_err 86 arch/powerpc/platforms/44x/fsp2.c pr_err("BC_SHD: 0x%08x\n", mfdcr(DCRN_PLB6_SHD)); pr_err 87 arch/powerpc/platforms/44x/fsp2.c pr_err("BC_ERR: 0x%08x\n", mfdcr(DCRN_PLB6_ERR)); pr_err 89 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLB6-to-PLB4 Bridge:\n"); pr_err 90 arch/powerpc/platforms/44x/fsp2.c pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_ESR)); pr_err 91 arch/powerpc/platforms/44x/fsp2.c pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARH)); pr_err 92 arch/powerpc/platforms/44x/fsp2.c pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARL)); pr_err 94 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLB4-to-PLB6 Bridge:\n"); pr_err 95 arch/powerpc/platforms/44x/fsp2.c pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_ESR)); pr_err 96 arch/powerpc/platforms/44x/fsp2.c pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARH)); pr_err 97 arch/powerpc/platforms/44x/fsp2.c pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARL)); pr_err 99 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLB6-to-MCIF Bridge:\n"); pr_err 100 arch/powerpc/platforms/44x/fsp2.c pr_err("BESR0: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR0)); pr_err 101 arch/powerpc/platforms/44x/fsp2.c pr_err("BESR1: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR1)); pr_err 102 arch/powerpc/platforms/44x/fsp2.c pr_err("BEARH: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARH)); pr_err 103 arch/powerpc/platforms/44x/fsp2.c pr_err("BEARL: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARL)); pr_err 105 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLB4 Arbiter:\n"); pr_err 106 arch/powerpc/platforms/44x/fsp2.c pr_err("P0ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRH)); pr_err 107 arch/powerpc/platforms/44x/fsp2.c pr_err("P0ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRL)); pr_err 108 arch/powerpc/platforms/44x/fsp2.c pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH)); pr_err 109 arch/powerpc/platforms/44x/fsp2.c pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH)); pr_err 110 arch/powerpc/platforms/44x/fsp2.c pr_err("P1ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRH)); pr_err 111 arch/powerpc/platforms/44x/fsp2.c pr_err("P1ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRL)); pr_err 112 arch/powerpc/platforms/44x/fsp2.c pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH)); pr_err 113 arch/powerpc/platforms/44x/fsp2.c pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH)); pr_err 120 arch/powerpc/platforms/44x/fsp2.c pr_err("\nPLB4-to-AHB Bridge:\n"); pr_err 121 arch/powerpc/platforms/44x/fsp2.c pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_ESR)); pr_err 122 arch/powerpc/platforms/44x/fsp2.c pr_err("SEUAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SEUAR)); pr_err 123 arch/powerpc/platforms/44x/fsp2.c pr_err("SELAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SELAR)); pr_err 125 arch/powerpc/platforms/44x/fsp2.c pr_err("\nAHB-to-PLB4 Bridge:\n"); pr_err 126 arch/powerpc/platforms/44x/fsp2.c pr_err("\nESR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_ESR)); pr_err 127 arch/powerpc/platforms/44x/fsp2.c pr_err("\nEAR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_EAR)); pr_err 132 arch/powerpc/platforms/44x/fsp2.c pr_err("CMU Error\n"); pr_err 133 arch/powerpc/platforms/44x/fsp2.c pr_err("FIR0: 0x%08x\n", mfcmu(CMUN_FIR0)); pr_err 138 arch/powerpc/platforms/44x/fsp2.c pr_err("Configuration Logic Error\n"); pr_err 139 arch/powerpc/platforms/44x/fsp2.c pr_err("CONF_FIR: 0x%08x\n", mfdcr(DCRN_CONF_FIR_RWC)); pr_err 140 arch/powerpc/platforms/44x/fsp2.c pr_err("RPERR0: 0x%08x\n", mfdcr(DCRN_CONF_RPERR0)); pr_err 141 arch/powerpc/platforms/44x/fsp2.c pr_err("RPERR1: 0x%08x\n", mfdcr(DCRN_CONF_RPERR1)); pr_err 150 arch/powerpc/platforms/44x/fsp2.c pr_err("DDR: Uncorrectable Error\n"); pr_err 151 arch/powerpc/platforms/44x/fsp2.c pr_err("MCSTAT: 0x%08x\n", pr_err 153 arch/powerpc/platforms/44x/fsp2.c pr_err("MCOPT1: 0x%08x\n", pr_err 155 arch/powerpc/platforms/44x/fsp2.c pr_err("MCOPT2: 0x%08x\n", pr_err 157 arch/powerpc/platforms/44x/fsp2.c pr_err("PHYSTAT: 0x%08x\n", pr_err 159 arch/powerpc/platforms/44x/fsp2.c pr_err("CFGR0: 0x%08x\n", pr_err 161 arch/powerpc/platforms/44x/fsp2.c pr_err("CFGR1: 0x%08x\n", pr_err 163 arch/powerpc/platforms/44x/fsp2.c pr_err("CFGR2: 0x%08x\n", pr_err 165 arch/powerpc/platforms/44x/fsp2.c pr_err("CFGR3: 0x%08x\n", pr_err 167 arch/powerpc/platforms/44x/fsp2.c pr_err("SCRUB_CNTL: 0x%08x\n", pr_err 169 arch/powerpc/platforms/44x/fsp2.c pr_err("ECCERR_PORT0: 0x%08x\n", pr_err 171 arch/powerpc/platforms/44x/fsp2.c pr_err("ECCERR_ADDR_PORT0: 0x%08x\n", pr_err 173 arch/powerpc/platforms/44x/fsp2.c pr_err("ECCERR_CNT_PORT0: 0x%08x\n", pr_err 175 arch/powerpc/platforms/44x/fsp2.c pr_err("ECC_CHECK_PORT0: 0x%08x\n", pr_err 177 arch/powerpc/platforms/44x/fsp2.c pr_err("MCER0: 0x%08x\n", pr_err 179 arch/powerpc/platforms/44x/fsp2.c pr_err("MCER1: 0x%08x\n", pr_err 181 arch/powerpc/platforms/44x/fsp2.c pr_err("BESR: 0x%08x\n", pr_err 183 arch/powerpc/platforms/44x/fsp2.c pr_err("BEARL: 0x%08x\n", pr_err 185 arch/powerpc/platforms/44x/fsp2.c pr_err("BEARH: 0x%08x\n", pr_err 209 arch/powerpc/platforms/44x/fsp2.c pr_err("device tree node %pOFn is missing a interrupt", pr_err 216 arch/powerpc/platforms/44x/fsp2.c pr_err("fsp_of_probe: request_irq failed: np=%pOF rc=%d", pr_err 101 arch/powerpc/platforms/44x/iss4xx.c pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu); pr_err 169 arch/powerpc/platforms/44x/ppc476.c pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", pr_err 189 arch/powerpc/platforms/4xx/gpio.c pr_err("%pOF: registration failed with status %d\n", np, ret); pr_err 60 arch/powerpc/platforms/4xx/hsta_msi.c pr_err("%s: Failed mapping irq %d\n", __func__, irq); pr_err 79 arch/powerpc/platforms/4xx/hsta_msi.c pr_err( pr_err 130 arch/powerpc/platforms/512x/mpc512x_lpbfifo.c pr_err("bogus LPBFIFO callback\n"); pr_err 54 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Restart module not mapped.\n"); pr_err 79 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Could not find DIU device tree node.\n"); pr_err 89 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Could not lookup DIU clock.\n"); pr_err 93 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Could not enable DIU clock.\n"); pr_err 228 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("No DIU node\n"); pr_err 235 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Can't map DIU\n"); pr_err 248 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Can't map DIU area desc.\n"); pr_err 267 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("Can't map DIU area desc.\n"); pr_err 304 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("%s: reserve bootmem failed\n", __func__); pr_err 407 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("%s: no compatible devices found\n", __func__); pr_err 425 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("%s: Can't map %pOF device\n", pr_err 432 arch/powerpc/platforms/512x/mpc512x_shared.c pr_err("%s: no fifo space available for %pOF\n", pr_err 56 arch/powerpc/platforms/512x/pdm360ng.c pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); pr_err 63 arch/powerpc/platforms/512x/pdm360ng.c pr_err("%s: Can't map gpio regs.\n", __func__); pr_err 183 arch/powerpc/platforms/52xx/media5200.c pr_err("Could not find Media5200 FPGA; PCI interrupts will not work\n"); pr_err 105 arch/powerpc/platforms/52xx/mpc52xx_common.c pr_err(__FILE__ ": Error while populating devices from DT\n"); pr_err 304 arch/powerpc/platforms/52xx/mpc52xx_common.c pr_err(__FILE__ ": Unable to determine PSC, no ac97 " pr_err 429 arch/powerpc/platforms/52xx/mpc52xx_gpt.c pr_err("calculation error; prescale:%x clocks:%llx\n", pr_err 670 arch/powerpc/platforms/52xx/mpc52xx_gpt.c pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY); pr_err 237 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c pr_err("bogus LPBFIFO IRQ\n"); pr_err 247 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c pr_err("bogus LPBFIFO IRQ (dma and not writing)\n"); pr_err 349 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c pr_err("transfer stalled\n"); pr_err 74 arch/powerpc/platforms/52xx/mpc52xx_pm.c pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n"); pr_err 83 arch/powerpc/platforms/52xx/mpc52xx_pm.c pr_err("mpc52xx_pm_prepare(): could not map registers\n"); pr_err 35 arch/powerpc/platforms/82xx/km82xx.c pr_err("PIC init: can not find cpm-pic node\n"); pr_err 52 arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c pr_err("MCU status reg read failed.\n"); pr_err 112 arch/powerpc/platforms/83xx/mpc832x_rdb.c pr_err("%pOF: registration failed\n", np); pr_err 29 arch/powerpc/platforms/85xx/bsc913x_qds.c pr_err("bsc913x: Failed to allocate MPIC structure\n"); pr_err 25 arch/powerpc/platforms/85xx/bsc913x_rdb.c pr_err("bsc913x: Failed to allocate MPIC structure\n"); pr_err 97 arch/powerpc/platforms/85xx/common.c pr_err("%s: Could not find Quicc Engine node\n", pr_err 328 arch/powerpc/platforms/85xx/mpc85xx_cds.c pr_err("Could not find FPGA node.\n"); pr_err 335 arch/powerpc/platforms/85xx/mpc85xx_cds.c pr_err("Fail to map FPGA area.\n"); pr_err 253 arch/powerpc/platforms/85xx/mpc85xx_mds.c pr_err("mpc85xx-rdb: could not map global utilities register\n"); pr_err 94 arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c pr_err("Could not map guts node address\n"); pr_err 74 arch/powerpc/platforms/85xx/mpc85xx_rdb.c pr_err("%s: Could not find qe-ic node\n", __func__); pr_err 105 arch/powerpc/platforms/85xx/mpc85xx_rdb.c pr_err("mpc85xx-rdb: could not map global utilities register\n"); pr_err 182 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: missing global utilities device node\n"); pr_err 188 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not map global utilities device\n"); pr_err 194 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: missing localbus node\n"); pr_err 200 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not map localbus node\n"); pr_err 206 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: missing local access window node\n"); pr_err 212 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not map local access window node\n"); pr_err 218 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: LAW node is missing fsl,num-laws property\n"); pr_err 240 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: CS0 and/or CS1 is not programmed\n"); pr_err 264 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not determine physical address for CS0" pr_err 270 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not determine physical address for CS1" pr_err 277 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not ioremap CS0 address %llx\n", pr_err 283 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not ioremap CS1 address %llx\n", pr_err 297 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: missing pixis node\n"); pr_err 304 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not map pixis registers\n"); pr_err 347 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: unsupported monitor port %i\n", port); pr_err 383 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: missing global utilities device node\n"); pr_err 390 arch/powerpc/platforms/85xx/p1022_ds.c pr_err("p1022ds: could not map global utilities device\n"); pr_err 53 arch/powerpc/platforms/85xx/p1022_rdk.c pr_err("p1022rdk: missing global utilities device node\n"); pr_err 60 arch/powerpc/platforms/85xx/p1022_rdk.c pr_err("p1022rdk: could not map global utilities device\n"); pr_err 152 arch/powerpc/platforms/85xx/smp.c pr_err("CPU%d didn't die...\n", cpu); pr_err 201 arch/powerpc/platforms/85xx/smp.c pr_err("No cpu-release-addr for cpu %d\n", cpu); pr_err 242 arch/powerpc/platforms/85xx/smp.c pr_err("timeout waiting for cpu %d to reset\n", pr_err 318 arch/powerpc/platforms/85xx/smp.c pr_err("Do not support more than 2 threads per CPU."); pr_err 283 arch/powerpc/platforms/85xx/socrates_fpga_pic.c pr_err("FPGA PIC: Unable to allocate host\n"); pr_err 42 arch/powerpc/platforms/85xx/t1042rdb_diu.c pr_err("%s: Could not map cpld registers\n", __func__); pr_err 64 arch/powerpc/platforms/85xx/t1042rdb_diu.c pr_err("%s: Unsupported monitor port %i\n", __func__, port); pr_err 86 arch/powerpc/platforms/85xx/t1042rdb_diu.c pr_err("%s: Missing scfg node. Can not display video.\n", pr_err 94 arch/powerpc/platforms/85xx/t1042rdb_diu.c pr_err("%s: Could not map device. Can not display video.\n", pr_err 52 arch/powerpc/platforms/85xx/twr_p102x.c pr_err("Could not find qe-ic node\n"); pr_err 86 arch/powerpc/platforms/85xx/twr_p102x.c pr_err("twr_p1025: could not map global utilities register\n"); pr_err 67 arch/powerpc/platforms/86xx/mpc8610_hpcd.c pr_err("%s: can't map pixis event IRQ.\n", __func__); pr_err 73 arch/powerpc/platforms/86xx/mpc8610_hpcd.c pr_err("%s: can't request pixis event IRQ: %d\n", pr_err 182 arch/powerpc/platforms/86xx/mpc8610_hpcd.c pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); pr_err 235 arch/powerpc/platforms/86xx/mpc8610_hpcd.c pr_err("mpc8610hpcd: missing global utilities device node\n"); pr_err 242 arch/powerpc/platforms/86xx/mpc8610_hpcd.c pr_err("mpc8610hpcd: could not map global utilities device\n"); pr_err 15 arch/powerpc/platforms/8xx/machine_check.c pr_err("Machine check in kernel mode.\n"); pr_err 16 arch/powerpc/platforms/8xx/machine_check.c pr_err("Caused by (from SRR1=%lx): ", reason); pr_err 95 arch/powerpc/platforms/cell/spider-pci.c pr_err("SPIDERPCI-IOWA:Alloc dummy_page_va failed.\n"); pr_err 102 arch/powerpc/platforms/cell/spider-pci.c pr_err("SPIDER-IOWA:Map dummy page filed.\n"); pr_err 125 arch/powerpc/platforms/cell/spider-pci.c pr_err("SPIDERPCI-IOWA:" pr_err 131 arch/powerpc/platforms/cell/spider-pci.c pr_err("SPIDERPCI-IOWA:Can't get resource.\n"); pr_err 137 arch/powerpc/platforms/cell/spider-pci.c pr_err("SPIDERPCI-IOWA:ioremap failed.\n"); pr_err 132 arch/powerpc/platforms/embedded6xx/flipper-pic.c pr_err("no parent found\n"); pr_err 136 arch/powerpc/platforms/embedded6xx/flipper-pic.c pr_err("unexpected parent compatible\n"); pr_err 142 arch/powerpc/platforms/embedded6xx/flipper-pic.c pr_err("no io memory range found\n"); pr_err 154 arch/powerpc/platforms/embedded6xx/flipper-pic.c pr_err("failed to allocate irq_domain\n"); pr_err 137 arch/powerpc/platforms/embedded6xx/hlwd-pic.c pr_err("spurious interrupt!\n"); pr_err 167 arch/powerpc/platforms/embedded6xx/hlwd-pic.c pr_err("no io memory range found\n"); pr_err 172 arch/powerpc/platforms/embedded6xx/hlwd-pic.c pr_err("ioremap failed\n"); pr_err 183 arch/powerpc/platforms/embedded6xx/hlwd-pic.c pr_err("failed to allocate irq_domain\n"); pr_err 62 arch/powerpc/platforms/embedded6xx/mvme5100.c pr_err("Could not find open-pic node\n"); pr_err 131 arch/powerpc/platforms/embedded6xx/mvme5100.c pr_err("HAWK PHB not present?\n"); pr_err 138 arch/powerpc/platforms/embedded6xx/mvme5100.c pr_err("HAWK PHB mibar not correctly set?\n"); pr_err 81 arch/powerpc/platforms/embedded6xx/wii.c pr_err("no compatible node found for %s\n", compatible); pr_err 86 arch/powerpc/platforms/embedded6xx/wii.c pr_err("no valid reg found for %pOFn\n", np); pr_err 247 arch/powerpc/platforms/pasemi/gpio_mdio.c pr_err("%s: Cannot register as MDIO bus, err %d\n", pr_err 269 arch/powerpc/platforms/pasemi/setup.c pr_err("Failed to locate the MPIC interrupt controller\n"); pr_err 278 arch/powerpc/platforms/pasemi/setup.c pr_err("No platform-open-pic property.\n"); pr_err 328 arch/powerpc/platforms/pasemi/setup.c pr_err("NMI delivered\n"); pr_err 335 arch/powerpc/platforms/pasemi/setup.c pr_err("Machine Check on CPU %d\n", cpu); pr_err 336 arch/powerpc/platforms/pasemi/setup.c pr_err("SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); pr_err 337 arch/powerpc/platforms/pasemi/setup.c pr_err("DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); pr_err 338 arch/powerpc/platforms/pasemi/setup.c pr_err("BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), pr_err 340 arch/powerpc/platforms/pasemi/setup.c pr_err("IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), pr_err 342 arch/powerpc/platforms/pasemi/setup.c pr_err("Cause:\n"); pr_err 345 arch/powerpc/platforms/pasemi/setup.c pr_err("Signalled by SDC\n"); pr_err 348 arch/powerpc/platforms/pasemi/setup.c pr_err("Load/Store detected error:\n"); pr_err 350 arch/powerpc/platforms/pasemi/setup.c pr_err("D-cache ECC double-bit error or bus error\n"); pr_err 352 arch/powerpc/platforms/pasemi/setup.c pr_err("LSU snoop response error\n"); pr_err 354 arch/powerpc/platforms/pasemi/setup.c pr_err("MMU SLB multi-hit or invalid B field\n"); pr_err 358 arch/powerpc/platforms/pasemi/setup.c pr_err("Recoverable Duptags\n"); pr_err 360 arch/powerpc/platforms/pasemi/setup.c pr_err("Recoverable D-cache parity error count overflow\n"); pr_err 362 arch/powerpc/platforms/pasemi/setup.c pr_err("TLB parity error count overflow\n"); pr_err 366 arch/powerpc/platforms/pasemi/setup.c pr_err("Bus Error\n"); pr_err 369 arch/powerpc/platforms/pasemi/setup.c pr_err("I-side SLB multiple hit\n"); pr_err 374 arch/powerpc/platforms/pasemi/setup.c pr_err("I-cache parity error hit\n"); pr_err 377 arch/powerpc/platforms/pasemi/setup.c pr_err("No MCE registers mapped yet, can't dump\n"); pr_err 379 arch/powerpc/platforms/pasemi/setup.c pr_err("SoC debug registers:\n"); pr_err 382 arch/powerpc/platforms/pasemi/setup.c pr_err("%s: 0x%08x\n", mce_regs[i].name, pr_err 389 arch/powerpc/platforms/pasemi/setup.c pr_err("slb contents:\n"); pr_err 393 arch/powerpc/platforms/pasemi/setup.c pr_err("%02d %016lx %016lx\n", i, e, v); pr_err 201 arch/powerpc/platforms/powermac/smp.c pr_err("Failed to setup secondary cpu IPI\n"); pr_err 861 arch/powerpc/platforms/powermac/smp.c pr_err("Failed to open i2c bus for time sync\n"); pr_err 238 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("%s: Can't register OPAL event interrupt (%d)\n", pr_err 247 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("%s: Can't request OPAL event interrupt (%d)\n", pr_err 1128 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n", pr_err 1502 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("EEH: dead IOC detected\n"); pr_err 1515 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("EEH: dead PHB#%x detected, " pr_err 1523 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("EEH: Fenced PHB#%x detected, " pr_err 1567 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("EEH: Frozen PE#%x " pr_err 1571 arch/powerpc/platforms/powernv/eeh-powernv.c pr_err("EEH: PE location: %s, " pr_err 208 arch/powerpc/platforms/powernv/idle.c pr_err("fastsleep_workaround_applyonce change failed while running pnv_fastsleep_workaround_apply"); pr_err 1245 arch/powerpc/platforms/powernv/idle.c pr_err("Could not allocate memory for dt parsing\n"); pr_err 141 arch/powerpc/platforms/powernv/memtrace.c pr_err("Failed to allocate memtrace_array\n"); pr_err 153 arch/powerpc/platforms/powernv/memtrace.c pr_err("Failed to allocate trace memory on node %d\n", nid); pr_err 182 arch/powerpc/platforms/powernv/memtrace.c pr_err("Failed to map trace memory at 0x%llx\n", pr_err 191 arch/powerpc/platforms/powernv/memtrace.c pr_err("Failed to create debugfs directory for node %d\n", pr_err 233 arch/powerpc/platforms/powernv/memtrace.c pr_err("Failed to add trace memory to node %d\n", pr_err 279 arch/powerpc/platforms/powernv/memtrace.c pr_err("Value must be aligned with 0x%llx\n", bytes); pr_err 88 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Passed token is out of range, token %d\n", pr_err 131 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Invalid token passed\n", __func__); pr_err 136 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Invalid message pointer passed\n", __func__); pr_err 163 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Invalid token passed\n", __func__); pr_err 168 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Invalid message pointer passed\n", __func__); pr_err 254 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Opal node not found\n", __func__); pr_err 261 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: %pOF has no opal-msg-async-num\n", pr_err 278 arch/powerpc/platforms/powernv/opal-async.c pr_err("%s: Can't register OPAL event notifier (%d)\n", pr_err 325 arch/powerpc/platforms/powernv/opal-core.c pr_err("Not enough memory to setup OPAL core (size: %lu)\n", pr_err 477 arch/powerpc/platforms/powernv/opal-core.c pr_err("Failed to get OPAL metadata (%d)\n", ret); pr_err 488 arch/powerpc/platforms/powernv/opal-core.c pr_err("Failed to get OPAL CPU metadata (%d)\n", ret); pr_err 525 arch/powerpc/platforms/powernv/opal-core.c pr_err("OPAL memory regions not found\n"); pr_err 539 arch/powerpc/platforms/powernv/opal-core.c pr_err("CPU state data not found!\n"); pr_err 551 arch/powerpc/platforms/powernv/opal-core.c pr_err("CPU state data is invalid.\n"); pr_err 561 arch/powerpc/platforms/powernv/opal-core.c pr_err("Could not export /sys/firmware/opal/core\n"); pr_err 577 arch/powerpc/platforms/powernv/opal-core.c pr_err("'/sys/firmware/opal/core' file not accessible!\n"); pr_err 612 arch/powerpc/platforms/powernv/opal-core.c pr_err("Failed to export /sys/firmware/opal/core\n"); pr_err 623 arch/powerpc/platforms/powernv/opal-core.c pr_err("Failed to export /sys/firmware/opal/core\n"); pr_err 246 arch/powerpc/platforms/powernv/opal-dump.c pr_err("%s : Failed to allocate memory\n", __func__); pr_err 420 arch/powerpc/platforms/powernv/opal-dump.c pr_err("%s: Can't register OPAL event irq (%d)\n", pr_err 429 arch/powerpc/platforms/powernv/opal-dump.c pr_err("%s: Can't request OPAL event irq (%d)\n", pr_err 169 arch/powerpc/platforms/powernv/opal-elog.c pr_err("ELOG: log read failed for log-id=%llx\n", pr_err 212 arch/powerpc/platforms/powernv/opal-elog.c pr_err("ELOG: log read failed for log-id=%llx\n", pr_err 250 arch/powerpc/platforms/powernv/opal-elog.c pr_err("ELOG: OPAL log info read failed\n"); pr_err 297 arch/powerpc/platforms/powernv/opal-elog.c pr_err("%s: Can't register OPAL event irq (%d)\n", pr_err 305 arch/powerpc/platforms/powernv/opal-elog.c pr_err("%s: Can't request OPAL event irq (%d)\n", pr_err 68 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to get boot memory tag (%lld)\n", ret); pr_err 246 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to set kernel metadata tag!\n"); pr_err 257 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to set boot memory tag!\n"); pr_err 299 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to register. Parameter Error(%lld).\n", rc); pr_err 302 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Support not available.\n"); pr_err 307 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to register. Unknown Error(%lld).\n", rc); pr_err 327 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to un-register - unexpected Error(%lld).\n", rc); pr_err 342 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to invalidate - unexpected Error(%lld).\n", rc); pr_err 389 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("CPU state data is invalid. Ignoring!\n"); pr_err 524 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Crash info header is not valid.\n"); pr_err 642 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Support missing for this f/w version!\n"); pr_err 659 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("F/W load area: 0x%llx-0x%llx\n", pr_err 661 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("F/W version not supported!\n"); pr_err 685 arch/powerpc/platforms/powernv/opal-fadump.c pr_err("Failed to get Kernel metadata (%lld)\n", ret); pr_err 411 arch/powerpc/platforms/powernv/opal-flash.c pr_err("%s : Failed to allocate memory\n", __func__); pr_err 526 arch/powerpc/platforms/powernv/opal-flash.c pr_err("%s : Failed to allocate memory\n", __func__); pr_err 219 arch/powerpc/platforms/powernv/opal-hmi.c pr_err("HMI Interrupt, Unknown event version %d !\n", pr_err 342 arch/powerpc/platforms/powernv/opal-hmi.c pr_err("HMI: out of memory, Opal message event not handled\n"); pr_err 369 arch/powerpc/platforms/powernv/opal-hmi.c pr_err("%s: Can't register OPAL event notifier (%d)\n", pr_err 179 arch/powerpc/platforms/powernv/opal-imc.c pr_err("IMC PMU %s Register failed\n", pmu_ptr->pmu.name); pr_err 223 arch/powerpc/platforms/powernv/opal-imc.c pr_err("%s: Failed to stop Core (cpu = %d)\n", pr_err 46 arch/powerpc/platforms/powernv/opal-kmsg.c pr_err("opal: kmsg_dump_register failed; returned %d\n", rc); pr_err 98 arch/powerpc/platforms/powernv/opal-memory-errors.c pr_err("MEMORY_ERROR: out of memory, Opal message event not" pr_err 126 arch/powerpc/platforms/powernv/opal-memory-errors.c pr_err("%s: Can't register OPAL event notifier (%d)\n", pr_err 75 arch/powerpc/platforms/powernv/opal-msglog.c pr_err("OPAL: memory console corruption. Aborting read.\n"); pr_err 36 arch/powerpc/platforms/powernv/opal-power.c pr_err("Failed to get EPOW event information\n"); pr_err 106 arch/powerpc/platforms/powernv/opal-power.c pr_err("Unknown power-control type %llu\n", type); pr_err 110 arch/powerpc/platforms/powernv/opal-power.c pr_err("Unknown OPAL message type %lu\n", msg_type); pr_err 146 arch/powerpc/platforms/powernv/opal-power.c pr_err("Failed to register SHUTDOWN notifier, ret = %d\n", ret); pr_err 162 arch/powerpc/platforms/powernv/opal-power.c pr_err("Failed to register EPOW notifier, ret = %d\n", ret); pr_err 167 arch/powerpc/platforms/powernv/opal-power.c pr_err("Failed to register DPO notifier, ret = %d\n", ret); pr_err 392 arch/powerpc/platforms/powernv/opal-prd.c pr_err("Couldn't register event notifier\n"); pr_err 398 arch/powerpc/platforms/powernv/opal-prd.c pr_err("Couldn't register PRD2 event notifier\n"); pr_err 404 arch/powerpc/platforms/powernv/opal-prd.c pr_err("failed to register miscdev\n"); pr_err 33 arch/powerpc/platforms/powernv/opal-sensor.c pr_err("%s: Failed to wait for the async response, %d\n", pr_err 86 arch/powerpc/platforms/powernv/opal-sensor.c pr_err("%s: Failed to wait for the async response, %d\n", pr_err 122 arch/powerpc/platforms/powernv/opal-sensor.c pr_err("Opal node 'sensors' not found\n"); pr_err 38 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("%s: Couldn't get the token, returning\n", pr_err 52 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("%s: Failed to wait for the async response, %zd\n", pr_err 73 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("%s: Couldn't get the token, returning\n", pr_err 88 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("%s: Failed to wait for the async response, %d\n", pr_err 162 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Opal sysparam node not compatible\n"); pr_err 168 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to create sysparam kobject\n"); pr_err 175 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to allocate memory for param data " pr_err 183 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: No string found of property param-name in " pr_err 190 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to allocate memory to read parameter " pr_err 197 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to allocate memory to read parameter " pr_err 204 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to allocate memory to read supported " pr_err 210 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Missing property param-id in the DT\n"); pr_err 215 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Missing property param-len in the DT\n"); pr_err 221 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Missing property param-perm in the DT\n"); pr_err 227 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to allocate memory for parameter " pr_err 266 arch/powerpc/platforms/powernv/opal-sysparam.c pr_err("SYSPARAM: Failed to create sysfs file %s\n", pr_err 329 arch/powerpc/platforms/powernv/opal.c pr_err("%s: Can't register OPAL event irq (%d)\n", pr_err 337 arch/powerpc/platforms/powernv/opal.c pr_err("%s: Can't request OPAL event irq (%d)\n", pr_err 511 arch/powerpc/platforms/powernv/opal.c pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n"); pr_err 518 arch/powerpc/platforms/powernv/opal.c pr_err("Machine check interrupt is fatal\n"); pr_err 601 arch/powerpc/platforms/powernv/opal.c pr_err("Machine Check Exception, Unknown event version %d !\n", pr_err 1089 arch/powerpc/platforms/powernv/opal.c pr_err("%s : Failed to allocate memory\n", __func__); pr_err 1125 arch/powerpc/platforms/powernv/opal.c pr_err("%s: unexpected OPAL error %d\n", __func__, rc); pr_err 42 arch/powerpc/platforms/powernv/pci-ioda-tce.c pr_err("Failed to allocate a TCE memory, level shift=%d\n", pr_err 1051 arch/powerpc/platforms/powernv/pci-ioda.c pr_err("%s: Device tree node not associated properly\n", pr_err 2880 arch/powerpc/platforms/powernv/pci-ioda.c pr_err("PCI %d: Failed to allocate MSI bitmap !\n", pr_err 3025 arch/powerpc/platforms/powernv/pci-ioda.c pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n", pr_err 3049 arch/powerpc/platforms/powernv/pci-ioda.c pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x", pr_err 3684 arch/powerpc/platforms/powernv/pci-ioda.c pr_err(" Missing \"ibm,opal-phbid\" property !\n"); pr_err 3698 arch/powerpc/platforms/powernv/pci-ioda.c pr_err(" Can't allocate PCI controller for %pOF\n", pr_err 3752 arch/powerpc/platforms/powernv/pci-ioda.c pr_err(" Failed to map registers !\n"); pr_err 3969 arch/powerpc/platforms/powernv/pci-ioda.c pr_err(" Missing \"ibm,opal-hubid\" property !\n"); pr_err 177 arch/powerpc/platforms/powernv/rng.c pr_err("Failed creating rng for %pOF (%d).\n", pr_err 247 arch/powerpc/platforms/powernv/setup.c pr_err("Unsupported '%s' reboot.\n", cmd); pr_err 249 arch/powerpc/platforms/powernv/setup.c pr_err("Unable to issue '%s' reboot. Err=%ld\n", pr_err 257 arch/powerpc/platforms/powernv/setup.c pr_err("Unable to reboot. Err=%ld\n", rc); pr_err 332 arch/powerpc/platforms/powernv/subcore.c pr_err("Unable to change split core mode while KVM active.\n"); pr_err 514 arch/powerpc/platforms/powernv/vas-window.c pr_err("Too many (%d) open windows\n", VAS_WINDOWS_PER_CHIP); pr_err 35 arch/powerpc/platforms/powernv/vas.c pr_err("No ibm,vas-id property for %s?\n", pdev->name); pr_err 40 arch/powerpc/platforms/powernv/vas.c pr_err("Unexpected DT configuration for [%s, %d]\n", pr_err 66 arch/powerpc/platforms/powernv/vas.c pr_err("Bad 'paste_win_id_shift' in DT, %llx\n", res->end); pr_err 705 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: tag mismatch, got %llx, expected %llx\n", pr_err 709 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: res %d status 0x%llx\n", __func__, __LINE__, res, pr_err 736 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: %s failed %d\n", __func__, __LINE__, op, res); pr_err 751 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: %s not completed, status 0x%llx\n", __func__, pr_err 799 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: lv1_open_device failed %s\n", __func__, pr_err 807 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: ps3_sb_event_receive_port_setup failed %d\n", pr_err 817 arch/powerpc/platforms/ps3/device-init.c pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__, pr_err 189 arch/powerpc/platforms/pseries/cmm.c pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc); pr_err 417 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid resource specified.\n"); pr_err 437 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid action specified.\n"); pr_err 457 arch/powerpc/platforms/pseries/dlpar.c pr_err("No DRC count specified.\n"); pr_err 462 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid DRC count specified.\n"); pr_err 468 arch/powerpc/platforms/pseries/dlpar.c pr_err("No DRC Index specified.\n"); pr_err 473 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid DRC Index specified.\n"); pr_err 483 arch/powerpc/platforms/pseries/dlpar.c pr_err("No DRC Index specified.\n"); pr_err 488 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid DRC Index specified.\n"); pr_err 497 arch/powerpc/platforms/pseries/dlpar.c pr_err("No DRC count specified.\n"); pr_err 502 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid DRC count specified.\n"); pr_err 508 arch/powerpc/platforms/pseries/dlpar.c pr_err("Invalid id_type specified.\n"); pr_err 552 arch/powerpc/platforms/pseries/dlpar.c pr_err("Could not handle DLPAR request \"%s\"\n", buf); pr_err 356 arch/powerpc/platforms/pseries/eeh_pseries.c pr_err("%s: Invalid option %d\n", pr_err 848 arch/powerpc/platforms/pseries/hotplug-cpu.c pr_err("Invalid action (%d) specified\n", hp_elog->action); pr_err 200 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Could not find LMB associativity\n"); pr_err 446 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Memory hot-remove failed, adding LMB's back\n"); pr_err 454 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Failed to add LMB back, drc index %x\n", pr_err 583 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Memory indexed-count-remove failed, adding any removed LMBs\n"); pr_err 592 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Failed to add LMB, drc index %x\n", pr_err 736 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Memory hot-add failed, removing any added LMBs\n"); pr_err 744 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Failed to remove LMB, drc index %x\n", pr_err 846 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Memory indexed-count-add failed, removing any added LMBs\n"); pr_err 854 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Failed to remove LMB, drc index %x\n", pr_err 931 arch/powerpc/platforms/pseries/hotplug-memory.c pr_err("Invalid action (%d) specified\n", hp_elog->action); pr_err 36 arch/powerpc/platforms/pseries/kexec.c pr_err("WARNING: DTL deregistration for cpu " pr_err 44 arch/powerpc/platforms/pseries/kexec.c pr_err("WARNING: SLB shadow buffer deregistration " pr_err 51 arch/powerpc/platforms/pseries/kexec.c pr_err("WARNING: VPA deregistration for cpu %d " pr_err 131 arch/powerpc/platforms/pseries/lpar.c pr_err("WARNING: DTL registration of cpu %d (hw %d) failed with %ld\n", pr_err 211 arch/powerpc/platforms/pseries/lpar.c pr_err("error allocating memory for associativity information\n"); pr_err 475 arch/powerpc/platforms/pseries/lpar.c pr_err("vcpudispatch_stats: unable to setup workqueue for DTL processing\n"); pr_err 513 arch/powerpc/platforms/pseries/lpar.c pr_err("vcpudispatch_stats: please use 0 to disable or 1 to enable dispatch statistics\n"); pr_err 608 arch/powerpc/platforms/pseries/lpar.c pr_err("vcpudispatch_stats_freq: please specify a frequency between 1 and %d\n", pr_err 644 arch/powerpc/platforms/pseries/lpar.c pr_err("vcpudispatch_stats: error creating procfs file\n"); pr_err 647 arch/powerpc/platforms/pseries/lpar.c pr_err("vcpudispatch_stats_freq: error creating procfs file\n"); pr_err 677 arch/powerpc/platforms/pseries/lpar.c pr_err("WARNING: VPA registration for cpu %d (hw %d) of area " pr_err 691 arch/powerpc/platforms/pseries/lpar.c pr_err("WARNING: SLB shadow buffer registration for " pr_err 749 arch/powerpc/platforms/pseries/lpar.c pr_err("Failed hash pte insert with error %ld\n", lpar_rc); pr_err 1036 arch/powerpc/platforms/pseries/lpar.c pr_err("Too many PTEs (%lu) for H_BLOCK_REMOVE", idx); pr_err 1679 arch/powerpc/platforms/pseries/lpar.c pr_err("Failed to register process table (rc=%ld)\n", rc); pr_err 427 arch/powerpc/platforms/pseries/mobility.c pr_err("mobility: unable to create migration sysfs file (%d)\n", rc); pr_err 431 arch/powerpc/platforms/pseries/mobility.c pr_err("mobility: unable to create api_version sysfs file (%d)\n", rc); pr_err 288 arch/powerpc/platforms/pseries/msi.c pr_err("rtas_msi: couldn't find PE for %s\n", pci_name(dev)); pr_err 300 arch/powerpc/platforms/pseries/msi.c pr_err("rtas_msi: found 0 devices under PE for %s\n", pr_err 40 arch/powerpc/platforms/pseries/pmem.c pr_err("Failed to acquire DRC, rc: %d, drc index: %x\n", pr_err 47 arch/powerpc/platforms/pseries/pmem.c pr_err("configure-connector failed for drc %x\n", drc_index); pr_err 55 arch/powerpc/platforms/pseries/pmem.c pr_err("Failed to attach node %pOF, rc: %d, drc index: %x\n", pr_err 83 arch/powerpc/platforms/pseries/pmem.c pr_err("Attempting to remove unused DRC index %x\n", drc_index); pr_err 96 arch/powerpc/platforms/pseries/pmem.c pr_err("Failed to release drc (%x) for CPU %pOFn, rc: %d\n", pr_err 116 arch/powerpc/platforms/pseries/pmem.c pr_err("Hotplug event for a pmem device, but none exists\n"); pr_err 121 arch/powerpc/platforms/pseries/pmem.c pr_err("Unsupported hotplug event type %d\n", pr_err 135 arch/powerpc/platforms/pseries/pmem.c pr_err("Unsupported hotplug action (%d)\n", hp_elog->action); pr_err 203 arch/powerpc/platforms/pseries/ras.c pr_err("Unknown power/cooling shutdown event (modifier = %d)\n", pr_err 276 arch/powerpc/platforms/pseries/ras.c pr_err("Unknown power/cooling event (action code = %d)\n", pr_err 388 arch/powerpc/platforms/pseries/ras.c pr_err("Recoverable hardware error detected\n"); pr_err 729 arch/powerpc/platforms/pseries/ras.c pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n"); pr_err 736 arch/powerpc/platforms/pseries/ras.c pr_err("Machine check interrupt is fatal\n"); pr_err 790 arch/powerpc/platforms/pseries/ras.c pr_err("Machine Check Exception, Unknown event version %d !\n", pr_err 154 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Failed to register. Hardware Error(%d).\n", rc); pr_err 158 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Can't have holes in boot memory area.\n"); pr_err 160 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Can't have holes in reserved memory area.\n"); pr_err 162 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Failed to register. Parameter Error(%d).\n", rc); pr_err 166 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Already registered!\n"); pr_err 171 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Failed to register. Unknown Error(%d).\n", rc); pr_err 195 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Failed to un-register - unexpected error(%d).\n", rc); pr_err 220 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Failed to invalidate - unexpected error (%d).\n", rc); pr_err 321 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Unable to read register save area.\n"); pr_err 347 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Unable to read CPU state data\n"); pr_err 401 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Dump taken by platform is not valid\n"); pr_err 407 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Dump taken by platform is incomplete\n"); pr_err 414 arch/powerpc/platforms/pseries/rtas-fadump.c pr_err("Crash info header is not valid.\n"); pr_err 43 arch/powerpc/platforms/pseries/suspend.c pr_err("pseries_suspend_begin: vasi_state returned %ld\n",rc); pr_err 48 arch/powerpc/platforms/pseries/suspend.c pr_err("pseries_suspend_begin: vasi_state returned state %ld\n", pr_err 158 arch/powerpc/platforms/pseries/suspend.c pr_err("%s: Could not bring present CPUs online.\n", pr_err 186 arch/powerpc/sysdev/cpm2_pic.c pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type); pr_err 262 arch/powerpc/sysdev/ehv_pic.c pr_err("ehv_pic_init: could not find epapr,hv-pic node\n"); pr_err 287 arch/powerpc/sysdev/ehv_pic.c pr_err("ehv_pic_init: of_iomap failed\n"); pr_err 35 arch/powerpc/sysdev/fsl_85xx_cache_sram.c pr_err("%s(): size(=%x) or align(=%x) zero or too big\n", pr_err 41 arch/powerpc/sysdev/fsl_85xx_cache_sram.c pr_err("%s(): align(=%x) must be power of two and >1\n", pr_err 387 arch/powerpc/sysdev/fsl_gtm.c pr_err("%pOF: unable to allocate memory\n", pr_err 396 arch/powerpc/sysdev/fsl_gtm.c pr_err("%pOF: no clock-frequency\n", np); pr_err 406 arch/powerpc/sysdev/fsl_gtm.c pr_err("%pOF: not enough interrupts specified\n", pr_err 416 arch/powerpc/sysdev/fsl_gtm.c pr_err("%pOF: unable to iomap registers\n", pr_err 66 arch/powerpc/sysdev/fsl_mpic_err.c pr_err("could not map mpic error registers\n"); pr_err 133 arch/powerpc/sysdev/fsl_mpic_err.c pr_err("Error interrupt setup failed\n"); pr_err 143 arch/powerpc/sysdev/fsl_mpic_err.c pr_err("Failed to register error interrupt handler\n"); pr_err 298 arch/powerpc/sysdev/fsl_msi.c pr_err("fsl-msi: fh_vmpic_get_msir() failed for " pr_err 258 arch/powerpc/sysdev/fsl_pci.c pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); pr_err 267 arch/powerpc/sysdev/fsl_pci.c pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); pr_err 289 arch/powerpc/sysdev/fsl_pci.c pr_err("%pOF: No outbound window space\n", hose->dn); pr_err 294 arch/powerpc/sysdev/fsl_pci.c pr_err("%pOF: No space for inbound window\n", hose->dn); pr_err 442 arch/powerpc/sysdev/fsl_pci.c pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to " pr_err 231 arch/powerpc/sysdev/fsl_rcpm.c pr_err("timeout waiting for SLP bit to be cleared\n"); pr_err 262 arch/powerpc/sysdev/fsl_rcpm.c pr_err("timeout waiting for LPM20 bit to be cleared\n"); pr_err 369 arch/powerpc/sysdev/fsl_rcpm.c pr_err("of_iomap() error.\n"); pr_err 541 arch/powerpc/sysdev/fsl_rio.c pr_err("%pOF: unable to find 'reg' property\n", pr_err 569 arch/powerpc/sysdev/fsl_rio.c pr_err("%pOF: unable to find 'reg' property\n", pr_err 556 arch/powerpc/sysdev/fsl_rmu.c pr_err("RIO: unable allocate port write queue\n"); pr_err 585 arch/powerpc/sysdev/fsl_rmu.c pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); pr_err 594 arch/powerpc/sysdev/fsl_rmu.c pr_err("FIFO allocation failed\n"); pr_err 1092 arch/powerpc/sysdev/fsl_rmu.c pr_err("%pOF: unable to find 'reg' property of message-unit\n", pr_err 2012 arch/powerpc/sysdev/mpic.c pr_err("mpic: Failed to register subsystem!\n"); pr_err 430 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: malformed available-ranges property.\n", np); pr_err 447 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: irq parse and map failed.\n", np); pr_err 470 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: cannot allocate memory for group.\n", np); pr_err 479 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: cannot ioremap timer register address.\n", np); pr_err 486 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: cannot ioremap tcr address.\n", np); pr_err 493 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: cannot get timer frequency.\n", np); pr_err 499 arch/powerpc/sysdev/mpic_timer.c pr_err("%pOF: cannot get timer irqs.\n", np); pr_err 141 arch/powerpc/sysdev/simple_gpio.c pr_err("%pOF: registration failed, status %d\n", np, ret); pr_err 30 arch/powerpc/sysdev/xics/icp-hv.c pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n", pr_err 42 arch/powerpc/sysdev/xics/icp-hv.c pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n", pr_err 52 arch/powerpc/sysdev/xics/icp-hv.c pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n", pr_err 68 arch/powerpc/sysdev/xics/icp-hv.c pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " pr_err 185 arch/powerpc/sysdev/xics/icp-native.c pr_err("XICS: hw interrupt 0x%x to offline cpu, disabling\n", pr_err 284 arch/powerpc/sysdev/xics/icp-native.c pr_err("icp_native: Can't find interrupt reg property"); pr_err 291 arch/powerpc/sysdev/xics/icp-native.c pr_err("icp_native: ICP reg len (%d) != num servers (%d)", pr_err 302 arch/powerpc/sysdev/xics/icp-native.c pr_err("icp_native: Could not translate ICP MMIO" pr_err 163 arch/powerpc/sysdev/xics/icp-opal.c pr_err("XICS: hw interrupt 0x%x to offline cpu, " pr_err 58 arch/powerpc/sysdev/xics/ics-opal.c pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)" pr_err 91 arch/powerpc/sysdev/xics/ics-opal.c pr_err("%s: opal_set_xive(0xff) irq=%u returned %lld\n", pr_err 122 arch/powerpc/sysdev/xics/ics-opal.c pr_err("%s: opal_get_xive(irq=%d [hw 0x%x]) error %lld\n", pr_err 141 arch/powerpc/sysdev/xics/ics-opal.c pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)" pr_err 116 arch/powerpc/sysdev/xics/xics-common.c pr_err("Interrupt 0x%x (real) is invalid, disabling it.\n", vec); pr_err 62 arch/powerpc/sysdev/xilinx_intc.c pr_err("virtex_ml510: Failed to map cascade interrupt\n"); pr_err 94 arch/powerpc/sysdev/xilinx_pci.c pr_err("xilinx-pci: cannot resolve base address\n"); pr_err 100 arch/powerpc/sysdev/xilinx_pci.c pr_err("xilinx-pci: pcibios_alloc_controller() failed\n"); pr_err 494 arch/powerpc/sysdev/xive/common.c pr_err("%s: cpu=%d xc=%p\n", __func__, cpu, xc); pr_err 767 arch/powerpc/sysdev/xive/common.c pr_err("Error %d reconfiguring irq %d\n", rc, d->irq); pr_err 1168 arch/powerpc/sysdev/xive/common.c pr_err("Failed to populate IPI data on CPU %d\n", cpu); pr_err 1175 arch/powerpc/sysdev/xive/common.c pr_err("Failed to map IPI CPU %d\n", cpu); pr_err 55 arch/powerpc/sysdev/xive/native.c pr_err("opal_xive_get_irq_info(0x%x) returned %lld\n", pr_err 78 arch/powerpc/sysdev/xive/native.c pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq); pr_err 93 arch/powerpc/sysdev/xive/native.c pr_err("Failed to map trigger page for irq 0x%x\n", hw_irq); pr_err 156 arch/powerpc/sysdev/xive/native.c pr_err("Error %lld getting queue info prio %d\n", rc, prio); pr_err 179 arch/powerpc/sysdev/xive/native.c pr_err("Error %lld setting queue for prio %d\n", rc, prio); pr_err 206 arch/powerpc/sysdev/xive/native.c pr_err("Error %lld disabling queue for prio %d\n", rc, prio); pr_err 272 arch/powerpc/sysdev/xive/native.c pr_err("Failed to allocate IPI on CPU %d\n", cpu); pr_err 371 arch/powerpc/sysdev/xive/native.c pr_err("CPU %d odd ack CPPR, got %d at %d\n", pr_err 379 arch/powerpc/sysdev/xive/native.c pr_err("CPU %d got unexpected interrupt type HE=%d\n", pr_err 417 arch/powerpc/sysdev/xive/native.c pr_err("Failed to enable pool VP on CPU %d\n", cpu); pr_err 424 arch/powerpc/sysdev/xive/native.c pr_err("Failed to get pool VP info CPU %d\n", cpu); pr_err 496 arch/powerpc/sysdev/xive/native.c pr_err("Error %d getting provision chips array\n", rc); pr_err 512 arch/powerpc/sysdev/xive/native.c pr_err("Error %d reading provision chips array\n", rc); pr_err 521 arch/powerpc/sysdev/xive/native.c pr_err("Failed to allocate provision cache\n"); pr_err 534 arch/powerpc/sysdev/xive/native.c pr_err("XIVE: Failed to allocate pool VP, KVM might not function\n"); pr_err 573 arch/powerpc/sysdev/xive/native.c pr_err("Failed to get thread mgmnt area resource\n"); pr_err 578 arch/powerpc/sysdev/xive/native.c pr_err("Failed to map thread mgmnt area\n"); pr_err 603 arch/powerpc/sysdev/xive/native.c pr_err("Failed to get thread mgmnt area resource\n"); pr_err 615 arch/powerpc/sysdev/xive/native.c pr_err("Switch to exploitation mode failed with error %lld\n", rc); pr_err 646 arch/powerpc/sysdev/xive/native.c pr_err("Failed to allocate provisioning page\n"); pr_err 678 arch/powerpc/sysdev/xive/native.c pr_err("OPAL failed to allocate VCPUs order %d, err %lld\n", pr_err 771 arch/powerpc/sysdev/xive/native.c pr_err("OPAL failed to get queue info for VCPU %d/%d : %lld\n", pr_err 800 arch/powerpc/sysdev/xive/native.c pr_err("OPAL failed to get queue state for VCPU %d/%d : %lld\n", pr_err 820 arch/powerpc/sysdev/xive/native.c pr_err("OPAL failed to set queue state for VCPU %d/%d : %lld\n", pr_err 843 arch/powerpc/sysdev/xive/native.c pr_err("OPAL failed to get vp state for VCPU %d : %lld\n", pr_err 153 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_RESET failed %ld\n", rc); pr_err 173 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_GET_SOURCE_INFO lisn=%ld failed %ld\n", lisn, rc); pr_err 210 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_SET_SOURCE_CONFIG lisn=%ld target=%lx prio=%lx failed %ld\n", pr_err 235 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_GET_SOURCE_CONFIG lisn=%ld failed %ld\n", pr_err 265 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_GET_QUEUE_INFO cpu=%ld prio=%ld failed %ld\n", pr_err 298 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_SET_QUEUE_CONFIG cpu=%ld prio=%ld qpage=%lx returned %ld\n", pr_err 315 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_SYNC lisn=%ld returned %ld\n", lisn, rc); pr_err 342 arch/powerpc/sysdev/xive/spapr.c pr_err("H_INT_ESB lisn=%ld offset=%ld returned %ld\n", pr_err 413 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq); pr_err 425 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to map trigger page for irq 0x%x\n", hw_irq); pr_err 484 arch/powerpc/sysdev/xive/spapr.c pr_err("Error %lld getting queue info CPU %d prio %d\n", rc, pr_err 499 arch/powerpc/sysdev/xive/spapr.c pr_err("Error %lld setting queue for CPU %d prio %d\n", rc, pr_err 533 arch/powerpc/sysdev/xive/spapr.c pr_err("Error %ld setting queue for CPU %d prio %d\n", rc, pr_err 553 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to allocate IPI on CPU %d\n", cpu); pr_err 615 arch/powerpc/sysdev/xive/spapr.c pr_err("CPU %d odd ack CPPR, got %d at %d\n", pr_err 681 arch/powerpc/sysdev/xive/spapr.c pr_err("not root node found !\n"); pr_err 687 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to read 'ibm,plat-res-int-priorities' property\n"); pr_err 692 arch/powerpc/sysdev/xive/spapr.c pr_err("invalid 'ibm,plat-res-int-priorities' property\n"); pr_err 718 arch/powerpc/sysdev/xive/spapr.c pr_err("no valid priority found in 'ibm,plat-res-int-priorities'\n"); pr_err 800 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to get thread mgmnt area resource\n"); pr_err 805 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to map thread mgmnt area\n"); pr_err 815 arch/powerpc/sysdev/xive/spapr.c pr_err("Failed to read 'ibm,xive-lisn-ranges' property\n"); pr_err 820 arch/powerpc/sysdev/xive/spapr.c pr_err("invalid 'ibm,xive-lisn-ranges' property\n"); pr_err 79 arch/riscv/include/asm/pgtable-64.h pr_err("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) pr_err 298 arch/riscv/include/asm/pgtable.h pr_err("%s:%d: bad pgd " PTE_FMT ".\n", __FILE__, __LINE__, pgd_val(e)) pr_err 35 arch/riscv/kernel/ftrace.c pr_err("%p: expected (%08x %08x) but got (%08x %08x)\n", pr_err 110 arch/riscv/kernel/module-sections.c pr_err("%s: module PLT section(s) missing\n", mod->name); pr_err 114 arch/riscv/kernel/module-sections.c pr_err("%s: module GOT section(s) missing\n", mod->name); pr_err 118 arch/riscv/kernel/module-sections.c pr_err("%s: module GOT.PLT section(s) missing\n", mod->name); pr_err 19 arch/riscv/kernel/module.c pr_err("%s: value %016llx out of range for 32-bit field\n", pr_err 99 arch/riscv/kernel/module.c pr_err( pr_err 141 arch/riscv/kernel/module.c pr_err( pr_err 185 arch/riscv/kernel/module.c pr_err( pr_err 209 arch/riscv/kernel/module.c pr_err( pr_err 231 arch/riscv/kernel/module.c pr_err( pr_err 253 arch/riscv/kernel/module.c pr_err( pr_err 335 arch/riscv/kernel/module.c pr_err("%s: Unknown relocation type %u\n", pr_err 379 arch/riscv/kernel/module.c pr_err( pr_err 49 arch/riscv/kernel/setup.c pr_err("No DTB passed to the kernel\n"); pr_err 53 arch/riscv/kernel/smp.c pr_err("Couldn't find cpu id for hartid [%d]\n", hartid); pr_err 39 arch/riscv/kernel/vdso.c pr_err("vdso: pagelist allocation failed\n"); pr_err 27 arch/riscv/mm/hugetlbpage.c pr_err("hugepagesz: Unsupported page size %lu M\n", ps >> 20); pr_err 70 arch/riscv/mm/init.c pr_err("initrd extends beyond end of memory"); pr_err 117 arch/riscv/mm/sifive_l2_cache.c pr_err("L2CACHE: DirError @ 0x%08X.%08X\n", add_h, add_l); pr_err 126 arch/riscv/mm/sifive_l2_cache.c pr_err("L2CACHE: DataError @ 0x%08X.%08X\n", add_h, add_l); pr_err 135 arch/riscv/mm/sifive_l2_cache.c pr_err("L2CACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l); pr_err 166 arch/riscv/mm/sifive_l2_cache.c pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]); pr_err 487 arch/riscv/net/bpf_jit_comp.c pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n", pr_err 497 arch/riscv/net/bpf_jit_comp.c pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n", pr_err 507 arch/riscv/net/bpf_jit_comp.c pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n", pr_err 1011 arch/riscv/net/bpf_jit_comp.c pr_err("bpf-jit: insn=%d offset=%d not supported yet!\n", pr_err 1424 arch/riscv/net/bpf_jit_comp.c pr_err("bpf-jit: unknown opcode %02x\n", code); pr_err 336 arch/s390/appldata/appldata_base.c pr_err("Starting the data collection for %s " pr_err 347 arch/s390/appldata/appldata_base.c pr_err("Stopping the data collection for %s " pr_err 438 arch/s390/appldata/appldata_base.c pr_err("Stopping the data collection for %s " pr_err 469 arch/s390/appldata/appldata_base.c pr_err("Starting the data collection for %s " pr_err 145 arch/s390/appldata/appldata_os.c pr_err("Starting a new OS data collection " pr_err 153 arch/s390/appldata/appldata_os.c pr_err("Stopping a faulty OS data " pr_err 175 arch/s390/appldata/appldata_os.c pr_err("Maximum OS record size %i exceeds the maximum " pr_err 143 arch/s390/crypto/aes_s390.c pr_err("Allocating AES fallback algorithm %s failed\n", pr_err 314 arch/s390/crypto/aes_s390.c pr_err("Allocating AES fallback algorithm %s failed\n", pr_err 625 arch/s390/crypto/aes_s390.c pr_err("Allocating XTS fallback algorithm %s failed\n", pr_err 344 arch/s390/crypto/prng.c pr_err("The prng self test state test " pr_err 358 arch/s390/crypto/prng.c pr_err("The prng self test data test " pr_err 838 arch/s390/crypto/prng.c pr_err("The prng module cannot " pr_err 440 arch/s390/hypfs/hypfs_diag.c pr_err("The hardware system does not support hypfs\n"); pr_err 450 arch/s390/hypfs/hypfs_diag.c pr_err("The hardware system does not provide all " pr_err 192 arch/s390/hypfs/inode.c pr_err("Updating the hypfs tree failed\n"); pr_err 506 arch/s390/hypfs/inode.c pr_err("Initialization of hypfs failed with rc=%i\n", rc); pr_err 690 arch/s390/kernel/debug.c pr_err("Registering debug feature %s failed\n", name); pr_err 1124 arch/s390/kernel/debug.c pr_err("Registering view %s/%s would exceed the maximum " pr_err 285 arch/s390/kernel/kprobes.c pr_err("Invalid kprobe detected.\n"); pr_err 131 arch/s390/kernel/perf_cpum_cf.c pr_err("Enabling the performance measuring unit " pr_err 156 arch/s390/kernel/perf_cpum_cf.c pr_err("Disabling the performance measuring unit " pr_err 557 arch/s390/kernel/perf_cpum_cf.c pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc); pr_err 61 arch/s390/kernel/perf_cpum_cf_common.c pr_err("CPU[%i] Counter data was lost\n", smp_processor_id()); pr_err 188 arch/s390/kernel/perf_cpum_cf_common.c pr_err("Registering for CPU-measurement alerts " pr_err 144 arch/s390/kernel/perf_cpum_cf_diag.c pr_err("Enabling the performance measuring unit " pr_err 172 arch/s390/kernel/perf_cpum_cf_diag.c pr_err("Disabling the performance measuring unit " pr_err 455 arch/s390/kernel/perf_cpum_cf_diag.c pr_err("cpum_cf_diag counter set compare error " pr_err 683 arch/s390/kernel/perf_cpum_cf_diag.c pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n", pr_err 691 arch/s390/kernel/perf_cpum_cf_diag.c pr_err("Registration of s390dbf(cpum_cf_diag) failed\n"); pr_err 700 arch/s390/kernel/perf_cpum_cf_diag.c pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n", pr_err 553 arch/s390/kernel/perf_cpum_sf.c pr_err("Switching off the sampling facility failed " pr_err 562 arch/s390/kernel/perf_cpum_sf.c pr_err("Switching off the sampling facility failed " pr_err 979 arch/s390/kernel/perf_cpum_sf.c pr_err("Loading sampling controls failed: op=%i err=%i\n", pr_err 1015 arch/s390/kernel/perf_cpum_sf.c pr_err("Loading sampling controls failed: op=%i err=%i\n", pr_err 1597 arch/s390/kernel/perf_cpum_sf.c pr_err("The AUX buffer with %lu pages for the " pr_err 1621 arch/s390/kernel/perf_cpum_sf.c pr_err("Sample data caused the AUX buffer with %lu " pr_err 1703 arch/s390/kernel/perf_cpum_sf.c pr_err("AUX buffer size (%i pages) is larger than the " pr_err 1708 arch/s390/kernel/perf_cpum_sf.c pr_err("AUX buffer size (%i pages) is less than the " pr_err 2068 arch/s390/kernel/perf_cpum_sf.c pr_err("Sample data was lost\n"); pr_err 2075 arch/s390/kernel/perf_cpum_sf.c pr_err("A sampling buffer entry is incorrect (alert=0x%x)\n", pr_err 2155 arch/s390/kernel/perf_cpum_sf.c pr_err("Sampling facility support for perf is not available: " pr_err 2192 arch/s390/kernel/perf_cpum_sf.c pr_err("Registering for s390dbf failed\n"); pr_err 820 arch/s390/kernel/setup.c pr_err("The initial RAM disk does not fit into the memory\n"); pr_err 3235 arch/s390/kvm/interrupt.c pr_err("Registering the GIB alert interruption handler failed\n"); pr_err 3242 arch/s390/kvm/interrupt.c pr_err("Associating the GIB with the AIV facility failed\n"); pr_err 472 arch/s390/kvm/kvm-s390.c pr_err("A FLIC registration call failed with rc=%d\n", rc); pr_err 545 arch/s390/mm/extmem.c pr_err("Unloading unknown DCSS %s failed\n", name); pr_err 578 arch/s390/mm/extmem.c pr_err("Saving unknown DCSS %s failed\n", name); pr_err 593 arch/s390/mm/extmem.c pr_err("Saving a DCSS failed with DEFSEG response code " pr_err 599 arch/s390/mm/extmem.c pr_err("Saving a DCSS failed with SAVESEG response code " pr_err 615 arch/s390/mm/extmem.c pr_err("DCSS %s cannot be loaded or queried\n", seg_name); pr_err 618 arch/s390/mm/extmem.c pr_err("DCSS %s cannot be loaded or queried without " pr_err 622 arch/s390/mm/extmem.c pr_err("Loading or querying DCSS %s resulted in a " pr_err 626 arch/s390/mm/extmem.c pr_err("DCSS %s has multiple page ranges and cannot be " pr_err 630 arch/s390/mm/extmem.c pr_err("DCSS %s overlaps with used storage and cannot " pr_err 634 arch/s390/mm/extmem.c pr_err("%s needs used memory resources and cannot be " pr_err 638 arch/s390/mm/extmem.c pr_err("DCSS %s is already loaded in a different access " pr_err 642 arch/s390/mm/extmem.c pr_err("There is not enough memory to load or query " pr_err 646 arch/s390/mm/extmem.c pr_err("DCSS %s exceeds the kernel mapping range (%lu) " pr_err 269 arch/s390/mm/hugetlbpage.c pr_err("hugepagesz= specifies an unsupported page size %s\n", pr_err 1283 arch/s390/net/bpf_jit_comp.c pr_err("Unknown opcode %02x\n", insn->code); pr_err 58 arch/s390/pci/pci_event.c pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n", pr_err 149 arch/sh/boards/mach-dreamcast/irq.c pr_err("%s: failed hooking irqs\n", __func__); pr_err 1063 arch/sh/boards/mach-ecovec24/setup.c pr_err("can not get I2C 1\n"); pr_err 1078 arch/sh/boards/mach-ecovec24/setup.c pr_err("unable to read sh_eth MAC address\n"); pr_err 212 arch/sh/boards/mach-sdk7786/setup.c pr_err("FPGA clock registration failed\n"); pr_err 36 arch/sh/boards/mach-sdk7786/sram.c pr_err("FPGA memory unmapped.\n"); pr_err 52 arch/sh/boards/mach-sdk7786/sram.c pr_err("Failed remapping FPGA memory.\n"); pr_err 62 arch/sh/boards/mach-sdk7786/sram.c pr_err("Failed adding memory\n"); pr_err 110 arch/sh/boards/mach-se/7343/irq.c pr_err("Failed to remap CPLD\n"); pr_err 127 arch/sh/boards/mach-se/7724/irq.c pr_err("%s: failed hooking irqs for FPGA\n", __func__); pr_err 97 arch/sh/boards/mach-x3proto/ilsel.c pr_err("Aliased sources must use ilsel_enable_fixed()\n"); pr_err 92 arch/sh/cchips/hd6446x/hd64461.c pr_err("%s: failed hooking irqs for HD64461\n", __func__); pr_err 515 arch/sh/drivers/pci/pcie-sh7786.c pr_err("clock initialization failed for port#%d\n", pr_err 522 arch/sh/drivers/pci/pcie-sh7786.c pr_err("phy initialization failed for port#%d\n", pr_err 529 arch/sh/drivers/pci/pcie-sh7786.c pr_err("core initialization failed for port#%d\n", pr_err 27 arch/sh/kernel/cpu/clock.c pr_err("%s: CPU clock registration failed.\n", __func__); pr_err 35 arch/sh/kernel/cpu/clock.c pr_err("%s: machvec clock initialization failed.\n", pr_err 351 arch/sh/kernel/cpu/sh4a/setup-shx3.c pr_err("Failed to set IRQ mode\n"); pr_err 364 arch/sh/kernel/cpu/sh4a/setup-shx3.c pr_err("Failed to set IRL mode\n"); pr_err 174 arch/sh/kernel/machine_kexec.c pr_err("crashkernel allocation failed\n"); pr_err 180 arch/sh/kernel/machine_kexec.c pr_err("crashkernel reservation failed - " pr_err 138 arch/sh/kernel/setup.c pr_err("initrd must be page aligned\n"); pr_err 143 arch/sh/kernel/setup.c pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n", pr_err 149 arch/sh/kernel/setup.c pr_err("initrd extends beyond end of memory " pr_err 213 arch/sh/kernel/setup.c pr_err("unable to request memory_resource 0x%lx 0x%lx\n", pr_err 99 arch/sh/kernel/smp.c pr_err("CPU %u didn't die...\n", cpu); pr_err 102 arch/sparc/include/asm/pgtable_64.h pr_err("%s:%d: bad pmd %p(%016lx) seen at (%pS)\n", \ pr_err 105 arch/sparc/include/asm/pgtable_64.h pr_err("%s:%d: bad pud %p(%016lx) seen at (%pS)\n", \ pr_err 108 arch/sparc/include/asm/pgtable_64.h pr_err("%s:%d: bad pgd %p(%016lx) seen at (%pS)\n", \ pr_err 864 arch/sparc/kernel/ds.c pr_err("SUN4V: Unable to set reboot data " pr_err 262 arch/sparc/kernel/irq_64.c pr_err("HV get cookie failed hv_err = %ld\n", hv_err); pr_err 663 arch/sparc/kernel/irq_64.c pr_err("IRQ handler data allocation failed.\n"); pr_err 692 arch/sparc/kernel/irq_64.c pr_err("HV vintr set cookie failed = %ld\n", hv_error); pr_err 459 arch/sparc/kernel/leon_kernel.c pr_err("Unable to attach timer IRQ%d\n", irq); pr_err 304 arch/sparc/kernel/mdesc.c pr_err("MD: %s node not supported\n", client->node_name); pr_err 445 arch/sparc/kernel/mdesc.c pr_err("MD: %s node type is not supported\n", name); pr_err 454 arch/sparc/kernel/mdesc.c pr_err("MD: Cannot find 1 or more required match properties for %s node.\n", pr_err 562 arch/sparc/kernel/mdesc.c pr_err("MD: %s node is not supported\n", node_name); pr_err 598 arch/sparc/kernel/mdesc.c pr_err("MD: %s node is not supported\n", node_name); pr_err 604 arch/sparc/kernel/mdesc.c pr_err("MD: Cannot find 1 or more required match properties for %s node.\n", pr_err 1066 arch/sparc/kernel/pci.c pr_err("PCI: pci_create_slot returned %ld.\n", pr_err 781 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "pci_iotsb_conf failed error: %ld\n", err); pr_err 788 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "pci_iotsb_bind failed error: %ld\n", err); pr_err 815 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "No iommu-address-ranges\n"); pr_err 822 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "No iommu-pagesizes\n"); pr_err 843 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "Error creating ATU IOTSB\n"); pr_err 1212 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "ATU init failed, err=%d\n", err); pr_err 1248 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "Could not register hvapi, err=%d\n", err); pr_err 1306 arch/sparc/kernel/pci_sun4v.c pr_err(PFX "Could not allocate atu\n"); pr_err 292 arch/sparc/kernel/pcr.c pr_err("perfmon: Could not register hvapi(0x%lx).\n", pr_err 389 arch/sparc/kernel/vio.c pr_err("VIO: Could not get MD node info %s, err=%d\n", pr_err 456 arch/sparc/kernel/vio.c pr_err("VIO: %s node not found in MDESC\n", node_name); pr_err 402 arch/sparc/mm/init_64.c pr_err("hugepagesz=%llu not supported by MMU.\n", pr_err 714 arch/sparc/net/bpf_jit_comp_32.c pr_err("bpb_jit_compile fatal error\n"); pr_err 734 arch/sparc/net/bpf_jit_comp_32.c pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n", pr_err 1578 arch/sparc/net/bpf_jit_comp_64.c pr_err("bpf_jit: Failed to converge, prev_size=%u size=%d\n", pr_err 96 arch/sparc/vdso/vma.c pr_err("VDSO64: Missing symbol sections.\n"); pr_err 124 arch/sparc/vdso/vma.c pr_err("VDSO64: Missing symbols.\n"); pr_err 164 arch/sparc/vdso/vma.c pr_err("VDSO32: Missing symbol sections.\n"); pr_err 192 arch/sparc/vdso/vma.c pr_err("VDSO32: Missing symbols.\n"); pr_err 1353 arch/um/drivers/ubd_kern.c pr_err("write to io thread failed: %d\n", -ret); pr_err 1059 arch/um/drivers/virtio_uml.c pr_err("Failed to register parent device!\n"); pr_err 35 arch/um/kernel/sysrq.c pr_err("Received SIGSEGV in SIGSEGV handler," pr_err 809 arch/x86/events/amd/ibs.c pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", pr_err 815 arch/x86/events/amd/ibs.c pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", pr_err 279 arch/x86/events/amd/power.c pr_err("Failed to read max compute unit power accumulator MSR\n"); pr_err 262 arch/x86/events/core.c pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", pr_err 273 arch/x86/events/core.c pr_err("Failed to access perfctr msr (MSR %x is %Lx)\n", pr_err 6 arch/x86/include/asm/pgtable-2level.h pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low) pr_err 8 arch/x86/include/asm/pgtable-2level.h pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e)) pr_err 15 arch/x86/include/asm/pgtable-3level.h pr_err("%s:%d: bad pte %p(%08lx%08lx)\n", \ pr_err 18 arch/x86/include/asm/pgtable-3level.h pr_err("%s:%d: bad pmd %p(%016Lx)\n", \ pr_err 21 arch/x86/include/asm/pgtable-3level.h pr_err("%s:%d: bad pgd %p(%016Lx)\n", \ pr_err 35 arch/x86/include/asm/pgtable_64.h pr_err("%s:%d: bad pte %p(%016lx)\n", \ pr_err 38 arch/x86/include/asm/pgtable_64.h pr_err("%s:%d: bad pmd %p(%016lx)\n", \ pr_err 41 arch/x86/include/asm/pgtable_64.h pr_err("%s:%d: bad pud %p(%016lx)\n", \ pr_err 46 arch/x86/include/asm/pgtable_64.h pr_err("%s:%d: bad p4d %p(%016lx)\n", \ pr_err 51 arch/x86/include/asm/pgtable_64.h pr_err("%s:%d: bad pgd %p(%016lx)\n", \ pr_err 115 arch/x86/kernel/aperture_64.c pr_err("Cannot allocate aperture memory hole [mem %#010lx-%#010lx] (%uKB)\n", pr_err 168 arch/x86/kernel/aperture_64.c pr_err("pci 0000:%02x:%02x.%d: APSIZE unreadable\n", pr_err 454 arch/x86/kernel/aperture_64.c pr_err("you are using iommu with agp, but GART size is less than 64MB\n"); pr_err 455 arch/x86/kernel/aperture_64.c pr_err("please increase GART size in your BIOS setup\n"); pr_err 456 arch/x86/kernel/aperture_64.c pr_err("if BIOS doesn't have that option, contact your HW vendor!\n"); pr_err 439 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " pr_err 447 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for " pr_err 637 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "TSC_DEADLINE disabled due to Errata; " pr_err 1363 arch/x86/kernel/apic/apic.c pr_err(FW_BUG "Local APIC %d not detected, force emulation\n", pr_err 244 arch/x86/kernel/apic/io_apic.c pr_err("IOAPIC %d: suspend/resume impossible!\n", idx); pr_err 386 arch/x86/kernel/apic/io_apic.c pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", pr_err 588 arch/x86/kernel/apic/io_apic.c pr_err("Unable to reset IRR for apic: %d, pin :%d\n", pr_err 1085 arch/x86/kernel/apic/io_apic.c pr_err("broken BIOS or MPTABLE parser, ayiee!!\n"); pr_err 2517 arch/x86/kernel/apic/io_apic.c pr_err("IOAPIC[%d]: Unable to change apic_id!\n", pr_err 423 arch/x86/kernel/apic/vector.c pr_err("Managed startup for irq %u, but no CPU\n", irqd->irq); pr_err 433 arch/x86/kernel/apic/vector.c pr_err("Managed startup irq %u, no vector available\n", pr_err 172 arch/x86/kernel/apic/x2apic_cluster.c pr_err("Failed to register X2APIC_PREPARE\n"); pr_err 266 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: NUMA is off, disabling UV support\n"); pr_err 323 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: OEM_ID:%s OEM_TABLE_ID:%s\n", oem_id, oem_table_id); pr_err 324 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("Current BIOS not supported, update kernel and/or BIOS\n"); pr_err 417 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: mem_block_size error with 0x%lx\n", mem_block_size); pr_err 452 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: GAM table sockid(%d) too large(>%d) @%d\n", gre->sockid, _max_socket, (int)(gre - uv_gre_table)); pr_err 1265 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: BIOS UVsystab version(%x) mismatch, expecting(%x)\n", rev, UV_SYSTAB_VERSION_UV4_LATEST); pr_err 1266 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: Cannot support UV operations, switching to generic PC\n"); pr_err 1404 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: socket for node %d not found!\n", lnid); pr_err 1448 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: Unknown/unsupported UV hub\n"); pr_err 1486 arch/x86/kernel/apic/x2apic_uv_x.c pr_err("UV: Node %d UV HUB already initialized!?\n", nodeid); pr_err 1193 arch/x86/kernel/apm_32.c pr_err("an event queue overflowed\n"); pr_err 1456 arch/x86/kernel/apm_32.c pr_err("%s passed bad filp\n", func); pr_err 1595 arch/x86/kernel/apm_32.c pr_err("filp not in user list\n"); pr_err 2352 arch/x86/kernel/apm_32.c pr_err("disabled - Unable to start kernel thread\n"); pr_err 39 arch/x86/kernel/check.c pr_err("memory_corruption_check config string not provided\n"); pr_err 59 arch/x86/kernel/check.c pr_err("memory_corruption_check_period config string not provided\n"); pr_err 78 arch/x86/kernel/check.c pr_err("memory_corruption_check_size config string not provided\n"); pr_err 155 arch/x86/kernel/check.c pr_err("Corrupted low memory at %p (%lx phys) = %08lx\n", addr, __pa(addr), *addr); pr_err 597 arch/x86/kernel/cpu/bugs.c pr_err("System may be vulnerable to spectre v2\n"); pr_err 693 arch/x86/kernel/cpu/bugs.c pr_err("Unknown user space protection option (%s). Switching to AUTO select\n", arg); pr_err 834 arch/x86/kernel/cpu/bugs.c pr_err("unknown option (%s). Switching to AUTO select\n", arg); pr_err 842 arch/x86/kernel/cpu/bugs.c pr_err("%s selected but not compiled in. Switching to AUTO select\n", mitigation_options[i].option); pr_err 849 arch/x86/kernel/cpu/bugs.c pr_err("retpoline,amd selected but CPU is not AMD. Switching to AUTO select\n"); pr_err 900 arch/x86/kernel/cpu/bugs.c pr_err("Spectre mitigation: kernel not compiled with retpoline; no mitigation available!"); pr_err 908 arch/x86/kernel/cpu/bugs.c pr_err("Spectre mitigation: LFENCE not serializing, switching to generic retpoline\n"); pr_err 1110 arch/x86/kernel/cpu/bugs.c pr_err("unknown option (%s). Switching to AUTO select\n", arg); pr_err 1455 arch/x86/kernel/cpu/common.c pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x APIC: %x\n", pr_err 601 arch/x86/kernel/cpu/intel.c pr_err("x86/mktme: No known encryption algorithm is supported: %#llx\n", pr_err 203 arch/x86/kernel/cpu/mce/amd.c pr_err("Unexpected deferred interrupt at vector %x\n", DEFERRED_ERROR_VECTOR); pr_err 352 arch/x86/kernel/cpu/mce/amd.c pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt " pr_err 367 arch/x86/kernel/cpu/mce/amd.c pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d " pr_err 462 arch/x86/kernel/cpu/mce/amd.c pr_err(FW_BUG "Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.\n"); pr_err 698 arch/x86/kernel/cpu/mce/amd.c pr_err("%s: Invalid DramBaseAddress range: 0x%x.\n", pr_err 710 arch/x86/kernel/cpu/mce/amd.c pr_err("%s: Invalid interleave address select %d.\n", pr_err 737 arch/x86/kernel/cpu/mce/amd.c pr_err("%s: Invalid number of interleaved channels %d.\n", pr_err 745 arch/x86/kernel/cpu/mce/amd.c pr_err("%s: Invalid number of interleaved nodes/dies %d.\n", pr_err 757 arch/x86/kernel/cpu/mce/amd.c pr_err("%s: Invalid interleave bits %d.\n", pr_err 1106 arch/x86/kernel/cpu/mce/core.c pr_err("Uncorrected hardware memory error in user-access at %llx", m->addr); pr_err 1111 arch/x86/kernel/cpu/mce/core.c pr_err("Memory error not recovered"); pr_err 1376 arch/x86/kernel/cpu/mce/core.c pr_err("Uncorrected memory error in page 0x%lx ignored\n" pr_err 1844 arch/x86/kernel/cpu/mce/core.c pr_err("CPU#%d: Unexpected int18 (Machine Check)\n", pr_err 2474 arch/x86/kernel/cpu/mce/core.c pr_err("Unable to init MCE device (rc: %d)\n", err); pr_err 351 arch/x86/kernel/cpu/mce/dev-mcelog.c pr_err("Unable to init device /dev/mcelog (rc: %d)\n", err); pr_err 261 arch/x86/kernel/cpu/mce/inject.c pr_err("Timeout waiting for mce inject %lx\n", pr_err 307 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: error reading HWCR\n", __func__); pr_err 315 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: error writing HWCR\n", __func__); pr_err 363 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: Invalid flags value: %s\n", __func__, __buf); pr_err 388 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: Invalid CPU: %llu\n", __func__, val); pr_err 439 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: Error reading F%dx%03x.\n", pr_err 447 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: Set D18F3x44[NbMcaToMstCpuEn] which BIOS hasn't done.\n", pr_err 453 arch/x86/kernel/cpu/mce/inject.c pr_err("%s: Error writing F%dx%03x.\n", pr_err 572 arch/x86/kernel/cpu/mce/inject.c pr_err("MCA bank %llu non-existent on CPU%d\n", val, m->extcpu); pr_err 391 arch/x86/kernel/cpu/mce/therm_throt.c pr_err("CPU%d: Unexpected LVT thermal interrupt!\n", pr_err 18 arch/x86/kernel/cpu/mce/threshold.c pr_err("Unexpected threshold interrupt at vector %x\n", pr_err 277 arch/x86/kernel/cpu/microcode/amd.c pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n", mc_hdr->patch_id); pr_err 698 arch/x86/kernel/cpu/microcode/amd.c pr_err("CPU%d: update failed for patch_level=0x%08x\n", pr_err 732 arch/x86/kernel/cpu/microcode/amd.c pr_err("failed to allocate equivalent CPU table\n"); pr_err 776 arch/x86/kernel/cpu/microcode/amd.c pr_err("Patch allocation failure.\n"); pr_err 782 arch/x86/kernel/cpu/microcode/amd.c pr_err("Patch data allocation failure.\n"); pr_err 817 arch/x86/kernel/cpu/microcode/amd.c pr_err("invalid type field in container file section header\n"); pr_err 437 arch/x86/kernel/cpu/microcode/core.c pr_err("too much data (max %ld pages)\n", nr_pages); pr_err 476 arch/x86/kernel/cpu/microcode/core.c pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR); pr_err 518 arch/x86/kernel/cpu/microcode/core.c pr_err("Not all CPUs online, aborting microcode update.\n"); pr_err 537 arch/x86/kernel/cpu/microcode/core.c pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n", pr_err 804 arch/x86/kernel/cpu/microcode/core.c pr_err("Failed to create group for CPU%d\n", cpu); pr_err 843 arch/x86/kernel/cpu/microcode/core.c pr_err("no support for this CPU vendor\n"); pr_err 869 arch/x86/kernel/cpu/microcode/core.c pr_err("Error creating microcode group!\n"); pr_err 189 arch/x86/kernel/cpu/microcode/intel.c pr_err("Error allocating buffer %p\n", data); pr_err 205 arch/x86/kernel/cpu/microcode/intel.c pr_err("Error allocating buffer for %p\n", data); pr_err 237 arch/x86/kernel/cpu/microcode/intel.c pr_err("Error: bad microcode data file size.\n"); pr_err 243 arch/x86/kernel/cpu/microcode/intel.c pr_err("Error: invalid/unknown microcode update format.\n"); pr_err 255 arch/x86/kernel/cpu/microcode/intel.c pr_err("Error: truncated extended signature table.\n"); pr_err 262 arch/x86/kernel/cpu/microcode/intel.c pr_err("Error: extended signature table size mismatch.\n"); pr_err 297 arch/x86/kernel/cpu/microcode/intel.c pr_err("Bad microcode data checksum, aborting.\n"); pr_err 315 arch/x86/kernel/cpu/microcode/intel.c pr_err("Bad extended signature checksum, aborting.\n"); pr_err 834 arch/x86/kernel/cpu/microcode/intel.c pr_err("CPU%d update to revision 0x%x failed\n", pr_err 876 arch/x86/kernel/cpu/microcode/intel.c pr_err("error! Truncated or inaccessible header in microcode data file\n"); pr_err 882 arch/x86/kernel/cpu/microcode/intel.c pr_err("error! Bad data in microcode data file (totalsize too small)\n"); pr_err 887 arch/x86/kernel/cpu/microcode/intel.c pr_err("error! Bad data in microcode data file (truncated file?)\n"); pr_err 1037 arch/x86/kernel/cpu/microcode/intel.c pr_err("Intel CPU family 0x%x not supported\n", c->x86); pr_err 59 arch/x86/kernel/cpu/mtrr/generic.c pr_err(FW_WARN "MTRR: CPU %u: SYSCFG[MtrrFixDramModEn]" pr_err 527 arch/x86/kernel/cpu/mtrr/generic.c pr_err("MTRR: CPU %u: Writing MSR %x to %x:%x failed\n", pr_err 102 arch/x86/kernel/cpu/tsx.c pr_err("tsx: invalid option, defaulting to off\n"); pr_err 171 arch/x86/kernel/e820.c pr_err("too many entries; ignoring [mem %#010llx-%#010llx]\n", pr_err 654 arch/x86/kernel/e820.c pr_err("Cannot find an available gap in the 32-bit address range\n"); pr_err 655 arch/x86/kernel/e820.c pr_err("PCI devices with unassigned 32-bit BARs may not work!\n"); pr_err 639 arch/x86/kernel/early-quirks.c pr_err("pci 0000:%02x:%02x.%d: Cannot power up Apple AirPort card\n", pr_err 651 arch/x86/kernel/early-quirks.c pr_err("pci 0000:%02x:%02x.%d: Cannot iomap Apple AirPort card\n", pr_err 254 arch/x86/kernel/fpu/init.c pr_err("Option 'no387' required CONFIG_MATH_EMULATION enabled.\n"); pr_err 747 arch/x86/kernel/fpu/xstate.c pr_err("x86/fpu: FP/SSE not present amongst the CPU's xstate features: 0x%llx.\n", xfeatures_mask); pr_err 41 arch/x86/kernel/irq.c pr_err("unexpected IRQ trap at vector %02x\n", irq); pr_err 279 arch/x86/kernel/kexec-bzimage64.c pr_err("File is too short to be a bzImage\n"); pr_err 285 arch/x86/kernel/kexec-bzimage64.c pr_err("Not a bzImage\n"); pr_err 290 arch/x86/kernel/kexec-bzimage64.c pr_err("No x86 boot sector present\n"); pr_err 295 arch/x86/kernel/kexec-bzimage64.c pr_err("Must be at least protocol version 2.12\n"); pr_err 300 arch/x86/kernel/kexec-bzimage64.c pr_err("zImage not a bzImage\n"); pr_err 305 arch/x86/kernel/kexec-bzimage64.c pr_err("Not a bzImage64. XLF_KERNEL_64 is not set.\n"); pr_err 310 arch/x86/kernel/kexec-bzimage64.c pr_err("XLF_CAN_BE_LOADED_ABOVE_4G is not set.\n"); pr_err 324 arch/x86/kernel/kexec-bzimage64.c pr_err("bzImage cannot handle 5-level paging mode.\n"); pr_err 363 arch/x86/kernel/kexec-bzimage64.c pr_err("bzImage truncated\n"); pr_err 368 arch/x86/kernel/kexec-bzimage64.c pr_err("Kernel command line too long\n"); pr_err 394 arch/x86/kernel/kexec-bzimage64.c pr_err("Loading purgatory failed\n"); pr_err 491 arch/x86/kernel/kexec-bzimage64.c pr_err("Could not find address of symbol stack_end\n"); pr_err 382 arch/x86/kernel/kprobes/core.c pr_err("Kprobes error: new displacement does not fit into s32 (%llx)\n", newdisp); pr_err 637 arch/x86/kernel/kprobes/core.c pr_err("Unrecoverable kprobe detected.\n"); pr_err 646 arch/x86/kernel/kvm.c pr_err("kvm_guest: Failed to install cpu hotplug callbacks\n"); pr_err 554 arch/x86/kernel/machine_kexec_64.c pr_err("Undefined symbol: %s\n", name); pr_err 559 arch/x86/kernel/machine_kexec_64.c pr_err("symbol '%s' in common section\n", name); pr_err 566 arch/x86/kernel/machine_kexec_64.c pr_err("Invalid section %d for symbol %s\n", pr_err 598 arch/x86/kernel/machine_kexec_64.c pr_err("Unknown rela relocation: %llu\n", pr_err 606 arch/x86/kernel/machine_kexec_64.c pr_err("Overflow in relocation type %d value 0x%lx\n", pr_err 121 arch/x86/kernel/module.c pr_err("%s: Unknown relocation: %u\n", pr_err 199 arch/x86/kernel/module.c pr_err("%s: Unknown rela relocation: %llu\n", pr_err 207 arch/x86/kernel/module.c pr_err("x86/modules: Skipping invalid relocation target, existing value is nonzero for type %d, loc %p, val %Lx\n", pr_err 212 arch/x86/kernel/module.c pr_err("overflow in relocation type %d val %Lx\n", pr_err 214 arch/x86/kernel/module.c pr_err("`%s' likely not compiled with -mcmodel=kernel\n", pr_err 155 arch/x86/kernel/mpparse.c pr_err("MPTABLE: bad signature [%c%c%c%c]!\n", pr_err 161 arch/x86/kernel/mpparse.c pr_err("MPTABLE: checksum error!\n"); pr_err 165 arch/x86/kernel/mpparse.c pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec); pr_err 169 arch/x86/kernel/mpparse.c pr_err("MPTABLE: null local APIC address!\n"); pr_err 194 arch/x86/kernel/mpparse.c pr_err("Your mptable is wrong, contact your HW vendor!\n"); pr_err 262 arch/x86/kernel/mpparse.c pr_err("MPTABLE: no processors registered!\n"); pr_err 302 arch/x86/kernel/mpparse.c pr_err("ELCR contains invalid data... not using ELCR\n"); pr_err 356 arch/x86/kernel/mpparse.c pr_err("???\nUnknown standard configuration %d\n", pr_err 467 arch/x86/kernel/mpparse.c pr_err("BIOS bug, MP table errors detected!...\n"); pr_err 486 arch/x86/kernel/mpparse.c pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); pr_err 525 arch/x86/kernel/mpparse.c pr_err("MPTABLE: error mapping MP table\n"); pr_err 870 arch/x86/kernel/mpparse.c pr_err("MPTABLE: mpf early_memremap() failed\n"); pr_err 886 arch/x86/kernel/mpparse.c pr_err("MPTABLE: mpc early_memremap() failed\n"); pr_err 917 arch/x86/kernel/mpparse.c pr_err("MPTABLE: new mpc early_memremap() failed\n"); pr_err 931 arch/x86/kernel/mpparse.c pr_err("MPTABLE: new mpf early_memremap() failed\n"); pr_err 212 arch/x86/kernel/msr.c pr_err("unable to get major %d for msr\n", MSR_MAJOR); pr_err 506 arch/x86/kernel/setup.c pr_err("Cannot reserve %ldMB crashkernel low memory, please try smaller size.\n", pr_err 513 arch/x86/kernel/setup.c pr_err("%s: Error reserving crashkernel low memblock.\n", __func__); pr_err 588 arch/x86/kernel/setup.c pr_err("%s: Error reserving crashkernel memblock.\n", __func__); pr_err 780 arch/x86/kernel/smpboot.c pr_err("APIC never delivered???\n"); pr_err 782 arch/x86/kernel/smpboot.c pr_err("APIC delivery error (%lx)\n", accept_status); pr_err 894 arch/x86/kernel/smpboot.c pr_err("APIC never delivered???\n"); pr_err 896 arch/x86/kernel/smpboot.c pr_err("APIC delivery error (%lx)\n", accept_status); pr_err 1149 arch/x86/kernel/smpboot.c pr_err("%s: bad cpu %d\n", __func__, cpu); pr_err 1181 arch/x86/kernel/smpboot.c pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu); pr_err 1624 arch/x86/kernel/smpboot.c pr_err("CPU %u didn't die...\n", cpu); pr_err 205 arch/x86/kernel/tsc_msr.c pr_err("Error MSR_FSB_FREQ index %d is unknown\n", index); pr_err 1077 arch/x86/kernel/uprobes.c pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n", pr_err 1434 arch/x86/kvm/mmu.c pr_err("%s: %p 0->BUG\n", __func__, spte); pr_err 1439 arch/x86/kvm/mmu.c pr_err("%s: %p 1->BUG\n", __func__, spte); pr_err 1458 arch/x86/kvm/mmu.c pr_err("%s: %p many->many\n", __func__, spte); pr_err 4074 arch/x86/kvm/mmu.c pr_err("%s: detect reserved bits on spte, addr 0x%llx, dump hierarchy:\n", pr_err 4077 arch/x86/kvm/mmu.c pr_err("------ spte 0x%llx level %d.\n", pr_err 791 arch/x86/kvm/svm.c pr_err("%s: ip 0x%lx next 0x%llx\n", pr_err 922 arch/x86/kvm/svm.c pr_err("%s: err EOPNOTSUPP on %d\n", __func__, me); pr_err 927 arch/x86/kvm/svm.c pr_err("%s: svm_data is NULL on %d\n", __func__, me); pr_err 1847 arch/x86/kvm/svm.c pr_err("SEV: %lu locked pages exceed the lock limit of %lu.\n", locked, lock_limit); pr_err 1865 arch/x86/kvm/svm.c pr_err("SEV: Failure locking %lu pages.\n", npages); pr_err 2885 arch/x86/kvm/svm.c pr_err("KVM: Guest triggered AMD Erratum 383\n"); pr_err 4577 arch/x86/kvm/svm.c pr_err("Unknown IPI interception\n"); pr_err 4863 arch/x86/kvm/svm.c pr_err("VMCB Control Area:\n"); pr_err 4864 arch/x86/kvm/svm.c pr_err("%-20s%04x\n", "cr_read:", control->intercept_cr & 0xffff); pr_err 4865 arch/x86/kvm/svm.c pr_err("%-20s%04x\n", "cr_write:", control->intercept_cr >> 16); pr_err 4866 arch/x86/kvm/svm.c pr_err("%-20s%04x\n", "dr_read:", control->intercept_dr & 0xffff); pr_err 4867 arch/x86/kvm/svm.c pr_err("%-20s%04x\n", "dr_write:", control->intercept_dr >> 16); pr_err 4868 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "exceptions:", control->intercept_exceptions); pr_err 4869 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "intercepts:", control->intercept); pr_err 4870 arch/x86/kvm/svm.c pr_err("%-20s%d\n", "pause filter count:", control->pause_filter_count); pr_err 4871 arch/x86/kvm/svm.c pr_err("%-20s%d\n", "pause filter threshold:", pr_err 4873 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "iopm_base_pa:", control->iopm_base_pa); pr_err 4874 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "msrpm_base_pa:", control->msrpm_base_pa); pr_err 4875 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "tsc_offset:", control->tsc_offset); pr_err 4876 arch/x86/kvm/svm.c pr_err("%-20s%d\n", "asid:", control->asid); pr_err 4877 arch/x86/kvm/svm.c pr_err("%-20s%d\n", "tlb_ctl:", control->tlb_ctl); pr_err 4878 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "int_ctl:", control->int_ctl); pr_err 4879 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "int_vector:", control->int_vector); pr_err 4880 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "int_state:", control->int_state); pr_err 4881 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "exit_code:", control->exit_code); pr_err 4882 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "exit_info1:", control->exit_info_1); pr_err 4883 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "exit_info2:", control->exit_info_2); pr_err 4884 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "exit_int_info:", control->exit_int_info); pr_err 4885 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "exit_int_info_err:", control->exit_int_info_err); pr_err 4886 arch/x86/kvm/svm.c pr_err("%-20s%lld\n", "nested_ctl:", control->nested_ctl); pr_err 4887 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "nested_cr3:", control->nested_cr3); pr_err 4888 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "avic_vapic_bar:", control->avic_vapic_bar); pr_err 4889 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "event_inj:", control->event_inj); pr_err 4890 arch/x86/kvm/svm.c pr_err("%-20s%08x\n", "event_inj_err:", control->event_inj_err); pr_err 4891 arch/x86/kvm/svm.c pr_err("%-20s%lld\n", "virt_ext:", control->virt_ext); pr_err 4892 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "next_rip:", control->next_rip); pr_err 4893 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "avic_backing_page:", control->avic_backing_page); pr_err 4894 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "avic_logical_id:", control->avic_logical_id); pr_err 4895 arch/x86/kvm/svm.c pr_err("%-20s%016llx\n", "avic_physical_id:", control->avic_physical_id); pr_err 4896 arch/x86/kvm/svm.c pr_err("VMCB State Save Area:\n"); pr_err 4897 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4901 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4905 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4909 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4913 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4917 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4921 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4925 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4929 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4933 arch/x86/kvm/svm.c pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n", pr_err 4937 arch/x86/kvm/svm.c pr_err("cpl: %d efer: %016llx\n", pr_err 4939 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4941 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4943 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4945 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4947 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4949 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4951 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4953 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4956 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4959 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4961 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 4963 arch/x86/kvm/svm.c pr_err("%-15s %016llx %-13s %016llx\n", pr_err 5409 arch/x86/kvm/svm.c pr_err("%s: failed to update PI IRTE\n", __func__); pr_err 84 arch/x86/kvm/vmx/nested.c pr_err("Missing field from shadow_read_only_field %x\n", pr_err 105 arch/x86/kvm/vmx/nested.c pr_err("Missing field from shadow_read_write_field %x\n", pr_err 5667 arch/x86/kvm/vmx/vmx.c pr_err("%s sel=0x%04x, attr=0x%05x, limit=0x%08x, base=0x%016lx\n", pr_err 5676 arch/x86/kvm/vmx/vmx.c pr_err("%s limit=0x%08x, base=0x%016lx\n", pr_err 5704 arch/x86/kvm/vmx/vmx.c pr_err("*** Guest State ***\n"); pr_err 5705 arch/x86/kvm/vmx/vmx.c pr_err("CR0: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n", pr_err 5708 arch/x86/kvm/vmx/vmx.c pr_err("CR4: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n", pr_err 5710 arch/x86/kvm/vmx/vmx.c pr_err("CR3 = 0x%016lx\n", vmcs_readl(GUEST_CR3)); pr_err 5714 arch/x86/kvm/vmx/vmx.c pr_err("PDPTR0 = 0x%016llx PDPTR1 = 0x%016llx\n", pr_err 5716 arch/x86/kvm/vmx/vmx.c pr_err("PDPTR2 = 0x%016llx PDPTR3 = 0x%016llx\n", pr_err 5719 arch/x86/kvm/vmx/vmx.c pr_err("RSP = 0x%016lx RIP = 0x%016lx\n", pr_err 5721 arch/x86/kvm/vmx/vmx.c pr_err("RFLAGS=0x%08lx DR7 = 0x%016lx\n", pr_err 5723 arch/x86/kvm/vmx/vmx.c pr_err("Sysenter RSP=%016lx CS:RIP=%04x:%016lx\n", pr_err 5738 arch/x86/kvm/vmx/vmx.c pr_err("EFER = 0x%016llx PAT = 0x%016llx\n", pr_err 5740 arch/x86/kvm/vmx/vmx.c pr_err("DebugCtl = 0x%016llx DebugExceptions = 0x%016lx\n", pr_err 5745 arch/x86/kvm/vmx/vmx.c pr_err("PerfGlobCtl = 0x%016llx\n", pr_err 5748 arch/x86/kvm/vmx/vmx.c pr_err("BndCfgS = 0x%016llx\n", vmcs_read64(GUEST_BNDCFGS)); pr_err 5749 arch/x86/kvm/vmx/vmx.c pr_err("Interruptibility = %08x ActivityState = %08x\n", pr_err 5753 arch/x86/kvm/vmx/vmx.c pr_err("InterruptStatus = %04x\n", pr_err 5756 arch/x86/kvm/vmx/vmx.c pr_err("*** Host State ***\n"); pr_err 5757 arch/x86/kvm/vmx/vmx.c pr_err("RIP = 0x%016lx RSP = 0x%016lx\n", pr_err 5759 arch/x86/kvm/vmx/vmx.c pr_err("CS=%04x SS=%04x DS=%04x ES=%04x FS=%04x GS=%04x TR=%04x\n", pr_err 5764 arch/x86/kvm/vmx/vmx.c pr_err("FSBase=%016lx GSBase=%016lx TRBase=%016lx\n", pr_err 5767 arch/x86/kvm/vmx/vmx.c pr_err("GDTBase=%016lx IDTBase=%016lx\n", pr_err 5769 arch/x86/kvm/vmx/vmx.c pr_err("CR0=%016lx CR3=%016lx CR4=%016lx\n", pr_err 5772 arch/x86/kvm/vmx/vmx.c pr_err("Sysenter RSP=%016lx CS:RIP=%04x:%016lx\n", pr_err 5777 arch/x86/kvm/vmx/vmx.c pr_err("EFER = 0x%016llx PAT = 0x%016llx\n", pr_err 5782 arch/x86/kvm/vmx/vmx.c pr_err("PerfGlobCtl = 0x%016llx\n", pr_err 5785 arch/x86/kvm/vmx/vmx.c pr_err("*** Control State ***\n"); pr_err 5786 arch/x86/kvm/vmx/vmx.c pr_err("PinBased=%08x CPUBased=%08x SecondaryExec=%08x\n", pr_err 5788 arch/x86/kvm/vmx/vmx.c pr_err("EntryControls=%08x ExitControls=%08x\n", vmentry_ctl, vmexit_ctl); pr_err 5789 arch/x86/kvm/vmx/vmx.c pr_err("ExceptionBitmap=%08x PFECmask=%08x PFECmatch=%08x\n", pr_err 5793 arch/x86/kvm/vmx/vmx.c pr_err("VMEntry: intr_info=%08x errcode=%08x ilen=%08x\n", pr_err 5797 arch/x86/kvm/vmx/vmx.c pr_err("VMExit: intr_info=%08x errcode=%08x ilen=%08x\n", pr_err 5801 arch/x86/kvm/vmx/vmx.c pr_err(" reason=%08x qualification=%016lx\n", pr_err 5803 arch/x86/kvm/vmx/vmx.c pr_err("IDTVectoring: info=%08x errcode=%08x\n", pr_err 5806 arch/x86/kvm/vmx/vmx.c pr_err("TSC Offset = 0x%016llx\n", vmcs_read64(TSC_OFFSET)); pr_err 5808 arch/x86/kvm/vmx/vmx.c pr_err("TSC Multiplier = 0x%016llx\n", pr_err 5813 arch/x86/kvm/vmx/vmx.c pr_err("SVI|RVI = %02x|%02x ", status >> 8, status & 0xff); pr_err 5817 arch/x86/kvm/vmx/vmx.c pr_err("APIC-access addr = 0x%016llx ", vmcs_read64(APIC_ACCESS_ADDR)); pr_err 5821 arch/x86/kvm/vmx/vmx.c pr_err("PostedIntrVec = 0x%02x\n", vmcs_read16(POSTED_INTR_NV)); pr_err 5823 arch/x86/kvm/vmx/vmx.c pr_err("EPT pointer = 0x%016llx\n", vmcs_read64(EPT_POINTER)); pr_err 5826 arch/x86/kvm/vmx/vmx.c pr_err("CR3 target%u=%016lx target%u=%016lx\n", pr_err 5830 arch/x86/kvm/vmx/vmx.c pr_err("CR3 target%u=%016lx\n", pr_err 5833 arch/x86/kvm/vmx/vmx.c pr_err("PLE Gap=%08x Window=%08x\n", pr_err 5836 arch/x86/kvm/vmx/vmx.c pr_err("Virtual processor ID = 0x%04x\n", pr_err 106 arch/x86/mm/amdtopology.c pr_err("Node %d using interleaving mode %Lx/%Lx\n", pr_err 133 arch/x86/mm/amdtopology.c pr_err("Empty node %d\n", nodeid); pr_err 137 arch/x86/mm/amdtopology.c pr_err("Node %d bogus settings %Lx-%Lx.\n", pr_err 144 arch/x86/mm/amdtopology.c pr_err("Node map not sorted %Lx,%Lx\n", pr_err 1040 arch/x86/mm/fault.c pr_err( pr_err 160 arch/x86/mm/kmmio.c pr_err("no pte for addr 0x%08lx\n", f->addr); pr_err 172 arch/x86/mm/kmmio.c pr_err("unexpected page level 0x%x.\n", level); pr_err 464 arch/x86/mm/kmmio.c pr_err("Unable to set page fault.\n"); pr_err 87 arch/x86/mm/mmio-mod.c pr_err("Error in %s: no pte for page 0x%08lx\n", pr_err 235 arch/x86/mm/mmio-mod.c pr_err("kmalloc failed in ioremap\n"); pr_err 393 arch/x86/mm/mmio-mod.c pr_err("Error taking CPU%d down: %d\n", cpu, err); pr_err 413 arch/x86/mm/mmio-mod.c pr_err("cannot re-enable CPU%d: %d\n", cpu, err); pr_err 145 arch/x86/mm/numa.c pr_err("too many memblk ranges\n"); pr_err 201 arch/x86/mm/numa.c pr_err("Cannot find %zu bytes in any node (initial node: %d)\n", pr_err 266 arch/x86/mm/numa.c pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n", pr_err 826 arch/x86/mm/numa.c pr_err("node_to_cpumask_map[%i] NULL\n", node); pr_err 53 arch/x86/mm/numa_emulation.c pr_err("NUMA: Too many emulated memblks, failing emulation\n"); pr_err 116 arch/x86/mm/numa_emulation.c pr_err("Not enough memory for each node. " pr_err 262 arch/x86/mm/numa_emulation.c pr_err("Fake node size %LuMB too small, increasing to %LuMB\n", pr_err 921 arch/x86/mm/pat.c pr_err("x86/PAT: %s:%d map pfn expected mapping type %s for [mem %#010Lx-%#010Lx], got %s\n", pr_err 84 arch/x86/mm/testmmiotrace.c pr_err("could not ioremap, aborting.\n"); pr_err 125 arch/x86/mm/testmmiotrace.c pr_err("you have to use the module argument mmio_address.\n"); pr_err 126 arch/x86/mm/testmmiotrace.c pr_err("DO NOT LOAD THIS MODULE UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!\n"); pr_err 844 arch/x86/net/bpf_jit_comp.c pr_err("unsupported BPF func %d addr %p image %p\n", pr_err 985 arch/x86/net/bpf_jit_comp.c pr_err("cond_jmp gen bug %llx\n", jmp_offset); pr_err 1012 arch/x86/net/bpf_jit_comp.c pr_err("jmp gen bug %llx\n", jmp_offset); pr_err 1042 arch/x86/net/bpf_jit_comp.c pr_err("bpf_jit: unknown opcode %02x\n", insn->code); pr_err 1048 arch/x86/net/bpf_jit_comp.c pr_err("bpf_jit: fatal insn size error\n"); pr_err 1054 arch/x86/net/bpf_jit_comp.c pr_err("bpf_jit: fatal error\n"); pr_err 1156 arch/x86/net/bpf_jit_comp.c pr_err("bpf_jit: proglen=%d != oldproglen=%d\n", pr_err 1895 arch/x86/net/bpf_jit_comp32.c pr_err("unsupported BPF func %d addr %p image %p\n", pr_err 2156 arch/x86/net/bpf_jit_comp32.c pr_err("cond_jmp gen bug %llx\n", jmp_offset); pr_err 2203 arch/x86/net/bpf_jit_comp32.c pr_err("cond_jmp gen bug %llx\n", jmp_offset); pr_err 2216 arch/x86/net/bpf_jit_comp32.c pr_err("cond_jmp gen bug %llx\n", jmp_offset); pr_err 2242 arch/x86/net/bpf_jit_comp32.c pr_err("jmp gen bug %llx\n", jmp_offset); pr_err 2270 arch/x86/net/bpf_jit_comp32.c pr_err("bpf_jit: unknown opcode %02x\n", code); pr_err 2276 arch/x86/net/bpf_jit_comp32.c pr_err("bpf_jit: fatal insn size error\n"); pr_err 2282 arch/x86/net/bpf_jit_comp32.c pr_err("bpf_jit: fatal error\n"); pr_err 2360 arch/x86/net/bpf_jit_comp32.c pr_err("bpf_jit: proglen=%d != oldproglen=%d\n", pr_err 560 arch/x86/pci/mmconfig-shared.c pr_err(PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx " pr_err 587 arch/x86/pci/mmconfig-shared.c pr_err(PREFIX "MMCONFIG has no entries\n"); pr_err 141 arch/x86/pci/mmconfig_64.c pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res); pr_err 213 arch/x86/platform/efi/efi.c pr_err("Memory map is above 4GB, disabling EFI.\n"); pr_err 336 arch/x86/platform/efi/efi.c pr_err("Couldn't map the system table!\n"); pr_err 375 arch/x86/platform/efi/efi.c pr_err("EFI data located above 4GB, disabling EFI.\n"); pr_err 385 arch/x86/platform/efi/efi.c pr_err("Couldn't map the system table!\n"); pr_err 412 arch/x86/platform/efi/efi.c pr_err("System table signature incorrect!\n"); pr_err 416 arch/x86/platform/efi/efi.c pr_err("Warning: System table version %d.%02d, expected 1.00 or greater!\n", pr_err 430 arch/x86/platform/efi/efi.c pr_err("Could not map the runtime service table!\n"); pr_err 454 arch/x86/platform/efi/efi.c pr_err("Could not map the runtime service table!\n"); pr_err 541 arch/x86/platform/efi/efi.c pr_err("Could not map the firmware vendor!\n"); pr_err 634 arch/x86/platform/efi/efi.c pr_err("ioremap of 0x%llX failed!\n", pr_err 870 arch/x86/platform/efi/efi.c pr_err("Failed to allocate EFI page tables\n"); pr_err 892 arch/x86/platform/efi/efi.c pr_err("Failed to remap late EFI memory map\n"); pr_err 958 arch/x86/platform/efi/efi.c pr_err("Failed to allocate EFI page tables\n"); pr_err 965 arch/x86/platform/efi/efi.c pr_err("Error reallocating memory, EFI runtime non-functional!\n"); pr_err 979 arch/x86/platform/efi/efi.c pr_err("Failed to remap late EFI memory map\n"); pr_err 1012 arch/x86/platform/efi/efi.c pr_err("Unable to switch EFI into virtual mode (status=%lx)!\n", pr_err 113 arch/x86/platform/efi/efi_64.c pr_err("Failed to allocate p4d table!\n"); pr_err 123 arch/x86/platform/efi/efi_64.c pr_err("Failed to allocate pud table!\n"); pr_err 358 arch/x86/platform/efi/efi_64.c pr_err("Error ident-mapping new memmap (0x%lx)!\n", pa_memmap); pr_err 378 arch/x86/platform/efi/efi_64.c pr_err("Failed to create 1:1 mapping for the first page!\n"); pr_err 393 arch/x86/platform/efi/efi_64.c pr_err("Unable to allocate EFI runtime stack < 4GB\n"); pr_err 405 arch/x86/platform/efi/efi_64.c pr_err("Failed to map kernel text 1:1\n"); pr_err 527 arch/x86/platform/efi/efi_64.c pr_err("Error while updating 1:1 mapping PA 0x%llx -> VA 0x%llx!\n", pr_err 533 arch/x86/platform/efi/efi_64.c pr_err("Error while updating VA mapping PA 0x%llx -> VA 0x%llx!\n", pr_err 254 arch/x86/platform/efi/quirks.c pr_err("Failed to lookup EFI memory descriptor for %pa\n", &addr); pr_err 259 arch/x86/platform/efi/quirks.c pr_err("Region spans EFI memory descriptors, %pa\n", &addr); pr_err 278 arch/x86/platform/efi/quirks.c pr_err("Could not allocate boot services memmap\n"); pr_err 284 arch/x86/platform/efi/quirks.c pr_err("Failed to map new boot services memmap\n"); pr_err 399 arch/x86/platform/efi/quirks.c pr_err("Failed to unmap 1:1 mapping for 0x%llx\n", pa); pr_err 402 arch/x86/platform/efi/quirks.c pr_err("Failed to unmap VA mapping for 0x%llx\n", va); pr_err 465 arch/x86/platform/efi/quirks.c pr_err("Failed to allocate new EFI memmap\n"); pr_err 471 arch/x86/platform/efi/quirks.c pr_err("Failed to map new EFI memmap\n"); pr_err 494 arch/x86/platform/efi/quirks.c pr_err("Could not install new EFI memmap\n"); pr_err 536 arch/x86/platform/efi/quirks.c pr_err("Could not map Configuration table!\n"); pr_err 630 arch/x86/platform/efi/quirks.c pr_err("multiple Quark security headers not supported\n"); pr_err 74 arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c pr_err("%s: vmmc regulator register failed\n", __func__); pr_err 28 arch/x86/platform/intel-mid/device_libs/platform_max7315.c pr_err("too many max7315s, we only support %d\n", pr_err 27 arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c pr_err("failed to create audio platform device\n"); pr_err 44 arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c pr_err("%s: Too many instances, only %d supported\n", __func__, pr_err 108 arch/x86/platform/intel-mid/intel-mid.c pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n", pr_err 109 arch/x86/platform/intel-mid/intel_mid_vrtc.c pr_err("%s: Invalid vRTC value: write of %llx to vRTC failed\n", pr_err 226 arch/x86/platform/intel-mid/sfi.c pr_err("too many SCU IPC devices"); pr_err 236 arch/x86/platform/intel-mid/sfi.c pr_err("too many SCU SPI devices"); pr_err 242 arch/x86/platform/intel-mid/sfi.c pr_err("failed to alloc mem for delayed spi dev %s\n", pr_err 257 arch/x86/platform/intel-mid/sfi.c pr_err("too many SCU I2C devices"); pr_err 263 arch/x86/platform/intel-mid/sfi.c pr_err("failed to alloc mem for delayed i2c dev %s\n", pr_err 292 arch/x86/platform/intel-mid/sfi.c pr_err("can't create i2c device %s\n", pr_err 350 arch/x86/platform/intel-mid/sfi.c pr_err("out of memory for SFI platform device '%s'.\n", pr_err 250 arch/x86/platform/intel-quark/imr.c pr_err("base %pa size 0x%08zx must align to 1KiB\n", pr_err 560 arch/x86/platform/intel-quark/imr.c pr_err("unable to setup IMR for kernel: %zu KiB (%lx - %lx)\n", pr_err 80 arch/x86/platform/olpc/olpc-xo1-sci.c pr_err(PFX "failed to get ebook state\n"); pr_err 204 arch/x86/platform/olpc/olpc-xo1-sci.c pr_err(PFX "Failed to clear SCI queue"); pr_err 122 arch/x86/platform/olpc/olpc-xo15-sci.c pr_err(PFX "Failed to clear SCI queue"); pr_err 45 arch/x86/platform/olpc/olpc_dt.c pr_err("PROM: %s: fetching child failed!\n", __func__); pr_err 62 arch/x86/platform/olpc/olpc_dt.c pr_err("PROM: %s: getproplen failed!\n", __func__); pr_err 82 arch/x86/platform/olpc/olpc_dt.c pr_err("PROM: %s: getprop failed!\n", __func__); pr_err 173 arch/x86/platform/olpc/olpc_dt.c pr_err("olpc_dt: finddevice failed!\n"); pr_err 190 arch/x86/platform/olpc/olpc_dt.c pr_err("olpc_dt: interpret failed!\n"); pr_err 319 arch/x86/platform/olpc/olpc_dt.c pr_err("PROM: unable to get root node from OFW!\n"); pr_err 69 arch/x86/platform/scx200/scx200_32.c pr_err("can't allocate I/O for GPIOs\n"); pr_err 128 arch/x86/platform/ts5500/ts5500.c pr_err("ts5500: unknown product code 0x%x\n", sbc->id); pr_err 198 arch/x86/platform/uv/bios_uv.c pr_err("UV: UVsystab: bad signature!\n"); pr_err 210 arch/x86/platform/uv/bios_uv.c pr_err("UV: UVsystab: ioremap(%d) failed!\n", size); pr_err 1696 arch/x86/platform/uv/tlb_uv.c pr_err("unable to create %s proc entry\n", pr_err 207 arch/x86/platform/uv/uv_nmi.c pr_err("UV: Invalid NMI action:%s, valid actions are:\n", arg); pr_err 209 arch/x86/platform/uv/uv_nmi.c pr_err("UV: %-8s - %s\n", pr_err 823 arch/x86/platform/uv/uv_nmi.c pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n"); pr_err 841 arch/x86/platform/uv/uv_nmi.c pr_err("UV: NMI error: KDB is not enabled in this kernel\n"); pr_err 888 arch/x86/platform/uv/uv_nmi.c pr_err("UV: NMI error: KGDB is not enabled in this kernel\n"); pr_err 408 arch/x86/power/cpu.c pr_err("x86/pm: Can not allocate memory to save/restore MSRs during suspend.\n"); pr_err 145 arch/x86/xen/efi.c pr_err("Could not determine UEFI Secure Boot status.\n"); pr_err 103 arch/x86/xen/multicalls.c pr_err("%d of %d multicall(s) failed: cpu %d\n", pr_err 108 arch/x86/xen/multicalls.c pr_err(" call %2d: op=%lu arg=[%lx] result=%ld\t%pS\n", pr_err 115 arch/x86/xen/multicalls.c pr_err(" call %2d: op=%lu arg=[%lx] result=%ld\n", pr_err 534 arch/x86/xen/pmu.c pr_err("VPMU init: No memory\n"); pr_err 87 arch/xtensa/kernel/module.c pr_err("%s: relocation out of range, " pr_err 111 arch/xtensa/kernel/module.c pr_err("%s: relocation out of range, " pr_err 156 arch/xtensa/kernel/module.c pr_err("%s: unexpected FLIX relocation: %u\n", pr_err 176 arch/xtensa/kernel/module.c pr_err("%s: unexpected ALT relocation: %u\n", pr_err 182 arch/xtensa/kernel/module.c pr_err("%s: unexpected relocation: %u\n", pr_err 49 arch/xtensa/kernel/pci.c pr_err("PCI: I/O Region %s/%d too large (%u bytes)\n", pr_err 425 arch/xtensa/kernel/perf_event.c pr_err("xtensa_pmu: failed to register CPU-hotplug.\n"); pr_err 41 arch/xtensa/kernel/platform.c pr_err("ERROR: Cannot calibrate cpu frequency! Assuming 10MHz.\n"); pr_err 260 arch/xtensa/kernel/smp.c pr_err("CPU %u failed to boot\n", cpu); pr_err 320 arch/xtensa/kernel/smp.c pr_err("CPU%u: unable to kill\n", cpu); pr_err 229 arch/xtensa/mm/tlb.c pr_err("%cTLB: way: %u, entry: %u, VPN %08x in %s PTE\n", pr_err 237 arch/xtensa/mm/tlb.c pr_err("%cTLB: way: %u, entry: %u, mapping: %08x->%08x, PTE: %08x\n", pr_err 241 arch/xtensa/mm/tlb.c pr_err("page refcount: %d, mapcount: %d\n", pr_err 204 arch/xtensa/platforms/iss/console.c pr_err("ISS_SERIAL: failed to unregister serial driver (%d)\n", pr_err 133 arch/xtensa/platforms/iss/network.c pr_err("%s: failed to parse '%s' as an ethernet address\n", pr_err 138 arch/xtensa/platforms/iss/network.c pr_err("%s: attempt to assign a multicast ethernet address\n", pr_err 143 arch/xtensa/platforms/iss/network.c pr_err("%s: attempt to assign an invalid ethernet address\n", pr_err 169 arch/xtensa/platforms/iss/network.c pr_err("%s: failed to open /dev/net/tun, returned %d (errno = %d)\n", pr_err 180 arch/xtensa/platforms/iss/network.c pr_err("%s: failed to set interface %s, returned %d (errno = %d)\n", pr_err 236 arch/xtensa/platforms/iss/network.c pr_err("%s: extra garbage on specification : '%s'\n", pr_err 241 arch/xtensa/platforms/iss/network.c pr_err("%s: invalid argument: %s. Skipping device!\n", pr_err 247 arch/xtensa/platforms/iss/network.c pr_err("%s: missing tuntap device name\n", dev->name); pr_err 336 arch/xtensa/platforms/iss/network.c pr_err("Device '%s' read returned %d, shutting it down\n", pr_err 438 arch/xtensa/platforms/iss/network.c pr_err("%s: %s failed(%d)\n", dev->name, __func__, len); pr_err 513 arch/xtensa/platforms/iss/network.c pr_err("eth_configure: failed to allocate device\n"); pr_err 541 arch/xtensa/platforms/iss/network.c pr_err("%s: invalid arguments. Skipping device!\n", pr_err 574 arch/xtensa/platforms/iss/network.c pr_err("%s: error registering net device!\n", dev->name); pr_err 617 arch/xtensa/platforms/iss/network.c pr_err("Expected '=' after device number\n"); pr_err 624 arch/xtensa/platforms/iss/network.c pr_err("Failed to parse '%s'\n", str); pr_err 640 arch/xtensa/platforms/iss/network.c pr_err("Device %u already configured\n", n); pr_err 646 arch/xtensa/platforms/iss/network.c pr_err("Alloc_bootmem failed\n"); pr_err 83 arch/xtensa/platforms/iss/setup.c pr_err("%s: command line too long: argv_size = %d\n", pr_err 94 arch/xtensa/platforms/iss/simdisk.c pr_err("SIMDISK: IO error %d\n", errno); pr_err 170 arch/xtensa/platforms/iss/simdisk.c pr_err("SIMDISK: Can't open %s: %d\n", filename, errno); pr_err 196 arch/xtensa/platforms/iss/simdisk.c pr_err("SIMDISK: error closing %s: %d\n", pr_err 272 arch/xtensa/platforms/iss/simdisk.c pr_err("blk_alloc_queue failed\n"); pr_err 281 arch/xtensa/platforms/iss/simdisk.c pr_err("alloc_disk failed\n"); pr_err 308 arch/xtensa/platforms/iss/simdisk.c pr_err("SIMDISK: register_blkdev: %d\n", simdisk_major); pr_err 93 arch/xtensa/platforms/xtfpga/setup.c pr_err("%pOFn: invalid address\n", np); pr_err 102 arch/xtensa/platforms/xtfpga/setup.c pr_err("%pOFn: clk registration failed\n", np); pr_err 107 arch/xtensa/platforms/xtfpga/setup.c pr_err("%pOFn: clk provider registration failed\n", np); pr_err 133 block/blk-integrity.c pr_err("%s: %s/%s protection interval %u != %u\n", pr_err 140 block/blk-integrity.c pr_err("%s: %s/%s tuple sz %u != %u\n", __func__, pr_err 147 block/blk-integrity.c pr_err("%s: %s/%s tag sz %u != %u\n", __func__, pr_err 154 block/blk-integrity.c pr_err("%s: %s/%s type %s != %s\n", __func__, pr_err 156 block/blk-mq-debugfs.c pr_err("%s: operation too long\n", __func__); pr_err 170 block/blk-mq-debugfs.c pr_err("%s: unsupported operation '%s'\n", __func__, op); pr_err 172 block/blk-mq-debugfs.c pr_err("%s: use 'run', 'start' or 'kick'\n", __func__); pr_err 470 block/blk-mq-tag.c pr_err("blk-mq: tag depth too large\n"); pr_err 2999 block/blk-mq.c pr_err("blk-mq: failed to allocate request map\n"); pr_err 379 block/genhd.c pr_err("%s: major requested (%u) is greater than the maximum (%u) for %s\n", pr_err 46 block/partitions/amiga.c pr_err("Dev %s: unable to read RDB block %d\n", pr_err 63 block/partitions/amiga.c pr_err("Trashed word at 0xd0 in block %d ignored in checksum calculation\n", pr_err 68 block/partitions/amiga.c pr_err("Dev %s: RDB in block %d has bad checksum\n", pr_err 89 block/partitions/amiga.c pr_err("Dev %s: unable to read partition block %d\n", pr_err 71 block/t10-pi.c pr_err("%s: ref tag error at location %llu " \ pr_err 86 block/t10-pi.c pr_err("%s: guard tag error at sector %llu " \ pr_err 97 certs/blacklist.c pr_err("Problem blacklisting hash (%ld)\n", PTR_ERR(key)); pr_err 163 certs/blacklist.c pr_err("- blacklisting failed\n"); pr_err 172 certs/system_keyring.c pr_err("Problem loading in-kernel X.509 certificate (%ld)\n", pr_err 185 certs/system_keyring.c pr_err("Problem parsing in-kernel X.509 certificate list\n"); pr_err 216 certs/system_keyring.c pr_err("PKCS#7 signature with non-detached data\n"); pr_err 273 crypto/algapi.c pr_err("alg: Unexpected test result for %s: %d\n", name, err); pr_err 466 crypto/algapi.c pr_err("Failed to unregister %s %s: %d\n", pr_err 606 crypto/asymmetric_keys/asymmetric_type.c pr_err("Asymmetric key parser '%s' already registered\n", pr_err 47 crypto/asymmetric_keys/mscode_parser.c pr_err("Unknown OID: %s\n", buffer); pr_err 58 crypto/asymmetric_keys/mscode_parser.c pr_err("Unexpected content type OID %u\n", oid); pr_err 102 crypto/asymmetric_keys/mscode_parser.c pr_err("Unknown OID: %s\n", buffer); pr_err 106 crypto/asymmetric_keys/mscode_parser.c pr_err("Unsupported content type: %u\n", oid); pr_err 56 crypto/asymmetric_keys/pkcs7_key_type.c pr_err("Invalid usage type %d\n", usage); pr_err 35 crypto/asymmetric_keys/restrict.c pr_err("Missing or invalid ca_keys id\n"); pr_err 41 crypto/asymmetric_keys/restrict.c pr_err("Unparsable ca_keys id hex string\n"); pr_err 83 crypto/asymmetric_keys/x509_public_key.c pr_err("Cert %*phN is blacklisted\n", pr_err 425 crypto/async_tx/async_pq.c pr_err("%s: failed to allocate required spare page\n", __func__); pr_err 257 crypto/crypto_user_stat.c pr_err("ERROR: Unhandled alg %d in %s\n", pr_err 1430 crypto/drbg.c pr_err("DRBG: periodical self test failed\n"); pr_err 35 crypto/rsa_helper.c pr_err("RSA: key size not allowed in FIPS mode\n"); pr_err 531 crypto/shash.c pr_err("Failed to unregister %s %s: %d\n", pr_err 267 crypto/tcrypt.c pr_err("associate data length (%u) too big\n", aad_size); pr_err 286 crypto/tcrypt.c pr_err("failed to load transform for %s: %ld\n", pr_err 317 crypto/tcrypt.c pr_err("alg: skcipher: Failed to allocate request for %s\n", pr_err 340 crypto/tcrypt.c pr_err("template (%u) too big for buffer (%lu)\n", pr_err 364 crypto/tcrypt.c pr_err("setkey() failed flags=%x\n", pr_err 401 crypto/tcrypt.c pr_err("calculating auth failed failed (%d)\n", pr_err 424 crypto/tcrypt.c pr_err("%s() failed return code=%d\n", e, ret); pr_err 545 crypto/tcrypt.c pr_err("associate data length (%u) too big\n", aad_size); pr_err 569 crypto/tcrypt.c pr_err("alg: aead: Failed to load transform for %s: %ld\n", algo, pr_err 580 crypto/tcrypt.c pr_err("alg: aead: Failed to allocate request for %s\n", pr_err 596 crypto/tcrypt.c pr_err("template (%u) too big for tvmem (%lu)\n", pr_err 624 crypto/tcrypt.c pr_err("setkey() failed flags=%x\n", pr_err 651 crypto/tcrypt.c pr_err("calculating auth failed failed (%d)\n", pr_err 670 crypto/tcrypt.c pr_err("%s() failed return code=%d\n", e, ret); pr_err 825 crypto/tcrypt.c pr_err("failed to load transform for %s: %ld\n", pr_err 838 crypto/tcrypt.c pr_err("alg: hash: Failed to allocate request for %s\n", pr_err 862 crypto/tcrypt.c pr_err("template (%u) too big for tvmem (%lu)\n", pr_err 889 crypto/tcrypt.c pr_err("At least one hashing failed ret=%d\n", ret); pr_err 1066 crypto/tcrypt.c pr_err("failed to load transform for %s: %ld\n", pr_err 1075 crypto/tcrypt.c pr_err("digestsize(%u) > %d\n", crypto_ahash_digestsize(tfm), pr_err 1083 crypto/tcrypt.c pr_err("ahash request allocation failure\n"); pr_err 1097 crypto/tcrypt.c pr_err("template (%u) too big for tvmem (%lu)\n", pr_err 1121 crypto/tcrypt.c pr_err("hashing failed ret=%d\n", ret); pr_err 1272 crypto/tcrypt.c pr_err("failed to load transform for %s: %ld\n", pr_err 1296 crypto/tcrypt.c pr_err("alg: skcipher: Failed to allocate request for %s\n", pr_err 1319 crypto/tcrypt.c pr_err("template (%u) too big for buffer (%lu)\n", pr_err 1342 crypto/tcrypt.c pr_err("setkey() failed flags=%x\n", pr_err 1388 crypto/tcrypt.c pr_err("%s() failed flags=%x\n", e, pr_err 1512 crypto/tcrypt.c pr_err("failed to load transform for %s: %ld\n", algo, pr_err 1522 crypto/tcrypt.c pr_err("tcrypt: skcipher: Failed to allocate request for %s\n", pr_err 1538 crypto/tcrypt.c pr_err("template (%u) too big for " pr_err 1562 crypto/tcrypt.c pr_err("setkey() failed flags=%x\n", pr_err 1603 crypto/tcrypt.c pr_err("%s() failed flags=%x\n", e, pr_err 1021 crypto/testmgr.c pr_err("alg: generic driver name for \"%s\" would be too long\n", pr_err 1059 crypto/testmgr.c pr_err("alg: %s: %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n", pr_err 1064 crypto/testmgr.c pr_err("alg: %s: %s overran result buffer on test vector %s, cfg=\"%s\"\n", pr_err 1076 crypto/testmgr.c pr_err("alg: shash: %s %s() failed with err %d on test vector %s, cfg=\"%s\"\n", pr_err 1110 crypto/testmgr.c pr_err("alg: shash: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n", pr_err 1116 crypto/testmgr.c pr_err("alg: shash: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n", pr_err 1125 crypto/testmgr.c pr_err("alg: shash: %s: error preparing scatterlist for test vector %s, cfg=\"%s\"\n", pr_err 1149 crypto/testmgr.c pr_err("alg: shash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n", pr_err 1155 crypto/testmgr.c pr_err("alg: shash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n", pr_err 1208 crypto/testmgr.c pr_err("alg: shash: %s export() overran state buffer on test vector %s, cfg=\"%s\"\n", pr_err 1257 crypto/testmgr.c pr_err("alg: ahash: %s %s() failed with err %d on test vector %s, cfg=\"%s\"\n", pr_err 1262 crypto/testmgr.c pr_err("alg: ahash: %s %s() used result buffer on test vector %s, cfg=\"%s\"\n", pr_err 1297 crypto/testmgr.c pr_err("alg: ahash: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n", pr_err 1303 crypto/testmgr.c pr_err("alg: ahash: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n", pr_err 1312 crypto/testmgr.c pr_err("alg: ahash: %s: error preparing scatterlist for test vector %s, cfg=\"%s\"\n", pr_err 1332 crypto/testmgr.c pr_err("alg: ahash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n", pr_err 1338 crypto/testmgr.c pr_err("alg: ahash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n", pr_err 1387 crypto/testmgr.c pr_err("alg: ahash: %s export() overran state buffer on test vector %s, cfg=\"%s\"\n", pr_err 1416 crypto/testmgr.c pr_err("alg: ahash: %s final() failed with err %d on test vector %s, cfg=\"%s\"\n", pr_err 1424 crypto/testmgr.c pr_err("alg: ahash: %s finup() failed with err %d on test vector %s, cfg=\"%s\"\n", pr_err 1591 crypto/testmgr.c pr_err("alg: hash: error allocating %s (generic impl of %s): %d\n", pr_err 1613 crypto/testmgr.c pr_err("alg: hash: digestsize for %s (%u) doesn't match generic impl (%u)\n", pr_err 1621 crypto/testmgr.c pr_err("alg: hash: blocksize for %s (%u) doesn't match generic impl (%u)\n", pr_err 1691 crypto/testmgr.c pr_err("alg: hash: failed to allocate shash transform for %s: %ld\n", pr_err 1730 crypto/testmgr.c pr_err("alg: hash: failed to allocate transform for %s: %ld\n", pr_err 1737 crypto/testmgr.c pr_err("alg: hash: failed to allocate request for %s\n", pr_err 1753 crypto/testmgr.c pr_err("alg: hash: failed to allocate test buffers for %s\n", pr_err 1766 crypto/testmgr.c pr_err("alg: hash: failed to allocate hash state buffer for %s\n", pr_err 1815 crypto/testmgr.c pr_err("alg: hash: test vectors for %s out of order, " pr_err 1866 crypto/testmgr.c pr_err("alg: aead: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n", pr_err 1872 crypto/testmgr.c pr_err("alg: aead: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n", pr_err 1880 crypto/testmgr.c pr_err("alg: aead: %s setauthsize failed on test vector %s; expected_error=%d, actual_error=%d\n", pr_err 1885 crypto/testmgr.c pr_err("alg: aead: %s setauthsize unexpectedly succeeded on test vector %s; expected_error=%d\n", pr_err 1913 crypto/testmgr.c pr_err("alg: aead: %s %s: error preparing scatterlists for test vector %s, cfg=\"%s\"\n", pr_err 1941 crypto/testmgr.c pr_err("alg: aead: %s %s corrupted request struct on test vector %s, cfg=\"%s\"\n", pr_err 1944 crypto/testmgr.c pr_err("alg: aead: changed 'req->cryptlen'\n"); pr_err 1946 crypto/testmgr.c pr_err("alg: aead: changed 'req->assoclen'\n"); pr_err 1948 crypto/testmgr.c pr_err("alg: aead: changed 'req->iv'\n"); pr_err 1950 crypto/testmgr.c pr_err("alg: aead: changed 'req->src'\n"); pr_err 1952 crypto/testmgr.c pr_err("alg: aead: changed 'req->dst'\n"); pr_err 1954 crypto/testmgr.c pr_err("alg: aead: changed 'req->base.tfm'\n"); pr_err 1956 crypto/testmgr.c pr_err("alg: aead: changed 'req->base.complete'\n"); pr_err 1958 crypto/testmgr.c pr_err("alg: aead: changed 'req->base.flags'\n"); pr_err 1960 crypto/testmgr.c pr_err("alg: aead: changed 'req->base.data'\n"); pr_err 1964 crypto/testmgr.c pr_err("alg: aead: %s %s corrupted src sgl on test vector %s, cfg=\"%s\"\n", pr_err 1970 crypto/testmgr.c pr_err("alg: aead: %s %s corrupted dst sgl on test vector %s, cfg=\"%s\"\n", pr_err 1980 crypto/testmgr.c pr_err("alg: aead: %s %s failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n", pr_err 1985 crypto/testmgr.c pr_err("alg: aead: %s %s unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n", pr_err 1995 crypto/testmgr.c pr_err("alg: aead: %s %s overran dst buffer on test vector %s, cfg=\"%s\"\n", pr_err 2000 crypto/testmgr.c pr_err("alg: aead: %s %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n", pr_err 2178 crypto/testmgr.c pr_err("alg: aead: error allocating %s (generic impl of %s): %d\n", pr_err 2198 crypto/testmgr.c pr_err("alg: aead: maxauthsize for %s (%u) doesn't match generic impl (%u)\n", pr_err 2206 crypto/testmgr.c pr_err("alg: aead: ivsize for %s (%u) doesn't match generic impl (%u)\n", pr_err 2213 crypto/testmgr.c pr_err("alg: aead: blocksize for %s (%u) doesn't match generic impl (%u)\n", pr_err 2307 crypto/testmgr.c pr_err("alg: aead: empty test suite for %s\n", driver); pr_err 2313 crypto/testmgr.c pr_err("alg: aead: failed to allocate transform for %s: %ld\n", pr_err 2320 crypto/testmgr.c pr_err("alg: aead: failed to allocate request for %s\n", pr_err 2328 crypto/testmgr.c pr_err("alg: aead: failed to allocate test buffers for %s\n", pr_err 2397 crypto/testmgr.c pr_err("alg: cipher: %s setkey failed on test vector %u; expected_error=%d, actual_error=%d, flags=%#x\n", pr_err 2403 crypto/testmgr.c pr_err("alg: cipher: %s setkey unexpectedly succeeded on test vector %u; expected_error=%d\n", pr_err 2467 crypto/testmgr.c pr_err("alg: skcipher: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n", pr_err 2473 crypto/testmgr.c pr_err("alg: skcipher: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n", pr_err 2490 crypto/testmgr.c pr_err("alg: skcipher: %s has ivsize=0 but test vector %s generates IV!\n", pr_err 2503 crypto/testmgr.c pr_err("alg: skcipher: %s %s: error preparing scatterlists for test vector %s, cfg=\"%s\"\n", pr_err 2529 crypto/testmgr.c pr_err("alg: skcipher: %s %s corrupted request struct on test vector %s, cfg=\"%s\"\n", pr_err 2532 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->cryptlen'\n"); pr_err 2534 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->iv'\n"); pr_err 2536 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->src'\n"); pr_err 2538 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->dst'\n"); pr_err 2540 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->base.tfm'\n"); pr_err 2542 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->base.complete'\n"); pr_err 2544 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->base.flags'\n"); pr_err 2546 crypto/testmgr.c pr_err("alg: skcipher: changed 'req->base.data'\n"); pr_err 2550 crypto/testmgr.c pr_err("alg: skcipher: %s %s corrupted src sgl on test vector %s, cfg=\"%s\"\n", pr_err 2556 crypto/testmgr.c pr_err("alg: skcipher: %s %s corrupted dst sgl on test vector %s, cfg=\"%s\"\n", pr_err 2565 crypto/testmgr.c pr_err("alg: skcipher: %s %s failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n", pr_err 2570 crypto/testmgr.c pr_err("alg: skcipher: %s %s unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n", pr_err 2579 crypto/testmgr.c pr_err("alg: skcipher: %s %s overran dst buffer on test vector %s, cfg=\"%s\"\n", pr_err 2584 crypto/testmgr.c pr_err("alg: skcipher: %s %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n", pr_err 2591 crypto/testmgr.c pr_err("alg: skcipher: %s %s test failed (wrong output IV) on test vector %s, cfg=\"%s\"\n", pr_err 2747 crypto/testmgr.c pr_err("alg: skcipher: error allocating %s (generic impl of %s): %d\n", pr_err 2767 crypto/testmgr.c pr_err("alg: skcipher: max keysize for %s (%u) doesn't match generic impl (%u)\n", pr_err 2774 crypto/testmgr.c pr_err("alg: skcipher: ivsize for %s (%u) doesn't match generic impl (%u)\n", pr_err 2781 crypto/testmgr.c pr_err("alg: skcipher: blocksize for %s (%u) doesn't match generic impl (%u)\n", pr_err 2866 crypto/testmgr.c pr_err("alg: skcipher: empty test suite for %s\n", driver); pr_err 2872 crypto/testmgr.c pr_err("alg: skcipher: failed to allocate transform for %s: %ld\n", pr_err 2879 crypto/testmgr.c pr_err("alg: skcipher: failed to allocate request for %s\n", pr_err 2887 crypto/testmgr.c pr_err("alg: skcipher: failed to allocate test buffers for %s\n", pr_err 2952 crypto/testmgr.c pr_err("alg: comp: compression failed: decompress: on test %d for %s failed: ret=%d\n", pr_err 2967 crypto/testmgr.c pr_err("alg: comp: compression failed: output differs: on test %d for %s\n", pr_err 3057 crypto/testmgr.c pr_err("alg: acomp: request alloc failed for %s\n", pr_err 3070 crypto/testmgr.c pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n", pr_err 3086 crypto/testmgr.c pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n", pr_err 3094 crypto/testmgr.c pr_err("alg: acomp: Compression test %d failed for %s: output len = %d\n", pr_err 3103 crypto/testmgr.c pr_err("alg: acomp: Compression test %d failed for %s\n", pr_err 3134 crypto/testmgr.c pr_err("alg: acomp: request alloc failed for %s\n", pr_err 3147 crypto/testmgr.c pr_err("alg: acomp: decompression failed on test %d for %s: ret=%d\n", pr_err 3155 crypto/testmgr.c pr_err("alg: acomp: Decompression test %d failed for %s: output len = %d\n", pr_err 3164 crypto/testmgr.c pr_err("alg: acomp: Decompression test %d failed for %s\n", pr_err 3280 crypto/testmgr.c pr_err("alg: acomp: Failed to load transform for %s: %ld\n", pr_err 3292 crypto/testmgr.c pr_err("alg: comp: Failed to load transform for %s: %ld\n", pr_err 3348 crypto/testmgr.c pr_err("alg: crc32c: Test failed for %s: %u\n", pr_err 3514 crypto/testmgr.c pr_err("alg: %s: Party A: generate public key test failed. err %d\n", pr_err 3530 crypto/testmgr.c pr_err("alg: %s: Party A: generate public key test failed. Invalid output\n", pr_err 3552 crypto/testmgr.c pr_err("alg: %s: Party A: compute shared secret test failed. err %d\n", pr_err 3583 crypto/testmgr.c pr_err("alg: %s: Party B: compute shared secret failed. err %d\n", pr_err 3599 crypto/testmgr.c pr_err("alg: %s: compute shared secret test failed. Invalid output\n", pr_err 3623 crypto/testmgr.c pr_err("alg: %s: test failed on vector %d, err=%d\n", pr_err 3639 crypto/testmgr.c pr_err("alg: kpp: Failed to load tfm for %s: %ld\n", pr_err 3753 crypto/testmgr.c pr_err("alg: akcipher: %s test failed. err %d\n", op, err); pr_err 3758 crypto/testmgr.c pr_err("alg: akcipher: %s test failed. Invalid output len\n", pr_err 3765 crypto/testmgr.c pr_err("alg: akcipher: %s test failed. Invalid output\n", pr_err 3803 crypto/testmgr.c pr_err("alg: akcipher: %s test failed. err %d\n", op, err); pr_err 3808 crypto/testmgr.c pr_err("alg: akcipher: %s test failed. Invalid output len %u\n", pr_err 3816 crypto/testmgr.c pr_err("alg: akcipher: %s test failed. Invalid output\n", op); pr_err 3844 crypto/testmgr.c pr_err("alg: akcipher: test %d failed for %s, err=%d\n", pr_err 3859 crypto/testmgr.c pr_err("alg: akcipher: Failed to load tfm for %s: %ld\n", pr_err 64 drivers/acpi/acpi_cmos_rtc.c pr_err(PREFIX "Error installing CMOS-RTC region handler\n"); pr_err 75 drivers/acpi/acpi_cmos_rtc.c pr_err(PREFIX "Error removing CMOS-RTC region handler\n"); pr_err 36 drivers/acpi/acpi_configfs.c pr_err("table already loaded\n"); pr_err 41 drivers/acpi/acpi_configfs.c pr_err("invalid table length\n"); pr_err 46 drivers/acpi/acpi_configfs.c pr_err("invalid table signature\n"); pr_err 70 drivers/acpi/acpi_configfs.c pr_err("table not loaded\n"); pr_err 436 drivers/acpi/acpi_dbg.c pr_err("Failed to create AML debugger thread.\n"); pr_err 512 drivers/acpi/acpi_dbg.c pr_err("Failed to initialize debugger.\n"); pr_err 603 drivers/acpi/acpi_ipmi.c pr_err("Can't register IPMI system interface watcher\n"); pr_err 185 drivers/acpi/acpi_watchdog.c pr_err("Device creation failed: %ld\n", PTR_ERR(pdev)); pr_err 504 drivers/acpi/apei/apei-base.c pr_err(APEI_PFX pr_err 516 drivers/acpi/apei/apei-base.c pr_err(APEI_PFX pr_err 527 drivers/acpi/apei/apei-base.c pr_err(APEI_PFX "Fail to merge resources!\n"); pr_err 567 drivers/acpi/apei/apei-base.c pr_err(APEI_PFX "Fail to sub resources!\n"); pr_err 46 drivers/acpi/apei/bert.c pr_err(FW_BUG "Truncated status block (length: %u).\n", pr_err 56 drivers/acpi/apei/bert.c pr_err(FW_BUG "Invalid error record.\n"); pr_err 115 drivers/acpi/apei/bert.c pr_err("get table failed, %s.\n", acpi_format_exception(status)); pr_err 121 drivers/acpi/apei/bert.c pr_err(FW_BUG "table invalid.\n"); pr_err 302 drivers/acpi/apei/einj.c pr_err("Can not request [mem %#010llx-%#010llx] for Trigger table\n", pr_err 310 drivers/acpi/apei/einj.c pr_err("Failed to map trigger table!\n"); pr_err 329 drivers/acpi/apei/einj.c pr_err("Can not request [mem %#010llx-%#010llx] for Trigger Table Entry\n", pr_err 337 drivers/acpi/apei/einj.c pr_err("Failed to map trigger table!\n"); pr_err 687 drivers/acpi/apei/einj.c pr_err("Failed to get EINJ table: %s\n", pr_err 712 drivers/acpi/apei/einj.c pr_err("Error collecting EINJ resources.\n"); pr_err 718 drivers/acpi/apei/einj.c pr_err("Error requesting memory/port resources.\n"); pr_err 724 drivers/acpi/apei/einj.c pr_err("Error pre-mapping GARs.\n"); pr_err 162 drivers/acpi/apei/erst-dbg.c pr_err(ERST_DBG_PFX "Too long record to be written\n"); pr_err 1117 drivers/acpi/apei/erst.c pr_err("Failed to get table, %s\n", msg); pr_err 1124 drivers/acpi/apei/erst.c pr_err(FW_BUG "ERST table is invalid.\n"); pr_err 1146 drivers/acpi/apei/erst.c pr_err("Failed to get Error Log Address Range.\n"); pr_err 1152 drivers/acpi/apei/erst.c pr_err("Can not request [mem %#010llx-%#010llx] for ERST.\n", pr_err 1182 drivers/acpi/apei/erst.c pr_err( pr_err 1191 drivers/acpi/apei/ghes.c pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n", pr_err 1198 drivers/acpi/apei/ghes.c pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n", pr_err 245 drivers/acpi/apei/hest.c pr_err(HEST_PFX "Failed to get table, %s\n", msg); pr_err 111 drivers/acpi/arm64/gtdt.c pr_err("Failed to map timer interrupt: invalid type.\n"); pr_err 139 drivers/acpi/arm64/gtdt.c pr_err("Failed to get c3stop info: invalid type.\n"); pr_err 181 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "invalid timer data.\n"); pr_err 199 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "GT block present, but frame count is zero.\n"); pr_err 204 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n", pr_err 350 drivers/acpi/arm64/gtdt.c pr_err(FW_BUG "failed to get the Watchdog base address.\n"); pr_err 340 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", pr_err 384 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", pr_err 422 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", pr_err 666 drivers/acpi/arm64/iort.c pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n", pr_err 1120 drivers/acpi/arm64/iort.c pr_err("could not register gsi hwirq %d name [%s]\n", hwirq, pr_err 1598 drivers/acpi/arm64/iort.c pr_err("iort node pointer overflows, bad table\n"); pr_err 1634 drivers/acpi/arm64/iort.c pr_err("Failed to get table, %s\n", msg); pr_err 741 drivers/acpi/battery.c pr_err("extension failed to load: %s", hook->name); pr_err 777 drivers/acpi/battery.c pr_err("error in extension, unloading: %s", pr_err 52 drivers/acpi/blacklist.c pr_err(PREFIX "Vendor \"%6.6s\" System \"%8.8s\" Revision 0x%x has a known ACPI BIOS problem.\n", pr_err 57 drivers/acpi/blacklist.c pr_err(PREFIX "Reason: %s. This is a %s error\n", pr_err 221 drivers/acpi/cppc_acpi.c pr_err("PCC check channel failed for ss: %d. ret=%d\n", pr_err 308 drivers/acpi/cppc_acpi.c pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n", pr_err 551 drivers/acpi/cppc_acpi.c pr_err("Failed to find PCC channel for subspace %d\n", pr_err 565 drivers/acpi/cppc_acpi.c pr_err("No PCC subspace found for %d CPPC\n", pr_err 584 drivers/acpi/cppc_acpi.c pr_err("Failed to ioremap PCC comm region mem for %d\n", pr_err 1437 drivers/acpi/ec.c pr_err("Fail in evaluating the _REG object" pr_err 1481 drivers/acpi/ec.c pr_err("failed to remove space handler\n"); pr_err 1501 drivers/acpi/ec.c pr_err("failed to remove gpe handler\n"); pr_err 124 drivers/acpi/ioapic.c pr_err("cannot allocate memory for new IOAPIC\n"); pr_err 43 drivers/acpi/nfit/intel.c pr_err("%s: security state retrieval failed (%d:%#x)\n", pr_err 205 drivers/acpi/numa.c pr_err("SRAT: SRAT not used.\n"); pr_err 256 drivers/acpi/numa.c pr_err("SRAT: Unexpected header length: %d\n", pr_err 274 drivers/acpi/numa.c pr_err("SRAT: Too many proximity domains.\n"); pr_err 279 drivers/acpi/numa.c pr_err("SRAT: Failed to add memblk to node %u [mem %#010Lx-%#010Lx]\n", pr_err 209 drivers/acpi/osl.c pr_err(PREFIX "System description tables not found\n"); pr_err 1070 drivers/acpi/osl.c pr_err("Call to kthread_create() failed.\n"); pr_err 1104 drivers/acpi/osl.c pr_err("Unsupported os_execute type %d.\n", type); pr_err 283 drivers/acpi/pci_mcfg.c pr_err("Failed to parse MCFG (%d)\n", err); pr_err 117 drivers/acpi/pci_slot.c pr_err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); pr_err 357 drivers/acpi/pmic/intel_pmic.c pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n", pr_err 324 drivers/acpi/processor_idle.c pr_err("not enough elements in _CST\n"); pr_err 333 drivers/acpi/processor_idle.c pr_err("count given by _CST is not valid\n"); pr_err 105 drivers/acpi/processor_pdc.c pr_err("Memory allocation error\n"); pr_err 175 drivers/acpi/processor_perflib.c pr_err("Failed to add freq constraint for CPU%d (%d)\n", pr_err 143 drivers/acpi/processor_thermal.c pr_err("Failed to add freq constraint for CPU%d (%d)\n", pr_err 657 drivers/acpi/scan.c pr_err(PREFIX "Memory allocation error\n"); pr_err 1257 drivers/acpi/scan.c pr_err(PREFIX "%s: Error reading device info\n", pr_err 546 drivers/acpi/sleep.c pr_err("ACPI does not support sleep state S%u\n", acpi_state); pr_err 113 drivers/acpi/spcr.c pr_err("Unexpected SPCR Access Width. Defaulting to byte size\n"); pr_err 183 drivers/acpi/sysfs.c pr_err("%s: string parameter too long\n", kp->name); pr_err 1005 drivers/acpi/sysfs.c pr_err(PREFIX "Unable to add hotplug profile '%s'\n", name); pr_err 1026 drivers/acpi/sysfs.c pr_err("Enabling force_remove is not supported anymore. Please report to linux-acpi@vger.kernel.org if you depend on this functionality\n"); pr_err 343 drivers/acpi/tables.c pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, proc->id); pr_err 544 drivers/acpi/tables.c pr_err("ACPI OVERRIDE: Table smaller than ACPI header [%s%s]\n", pr_err 556 drivers/acpi/tables.c pr_err("ACPI OVERRIDE: Unknown signature [%s%s]\n", pr_err 561 drivers/acpi/tables.c pr_err("ACPI OVERRIDE: File length does not match table length [%s%s]\n", pr_err 566 drivers/acpi/tables.c pr_err("ACPI OVERRIDE: Bad table checksum [%s%s]\n", pr_err 1202 drivers/android/binder.c pr_err("invalid inc strong node for %d\n", pr_err 1222 drivers/android/binder.c pr_err("invalid inc weak node for %d\n", pr_err 2295 drivers/android/binder.c pr_err("transaction release %d bad object at offset %lld, size %zd\n", pr_err 2309 drivers/android/binder.c pr_err("transaction release %d bad node %016llx\n", pr_err 2331 drivers/android/binder.c pr_err("transaction release %d bad handle %d, ret = %d\n", pr_err 2386 drivers/android/binder.c pr_err("transaction release %d bad parent offset\n", pr_err 2392 drivers/android/binder.c pr_err("transaction release %d invalid number of fds (%lld)\n", pr_err 2399 drivers/android/binder.c pr_err("transaction release %d not enough space for %lld fds in buffer\n", pr_err 2429 drivers/android/binder.c pr_err("transaction release %d bad object type %x\n", pr_err 3752 drivers/android/binder.c pr_err("BC_ATTEMPT_ACQUIRE not supported\n"); pr_err 3755 drivers/android/binder.c pr_err("BC_ACQUIRE_RESULT not supported\n"); pr_err 4027 drivers/android/binder.c pr_err("%d:%d unknown command %d\n", pr_err 4422 drivers/android/binder.c pr_err("%d:%d: bad work type %d\n", pr_err 4622 drivers/android/binder.c pr_err("unexpected work type, %d, not freed\n", pr_err 4901 drivers/android/binder.c pr_err("BINDER_SET_CONTEXT_MGR already set\n"); pr_err 4910 drivers/android/binder.c pr_err("BINDER_SET_CONTEXT_MGR bad uid %d != %d\n", pr_err 5199 drivers/android/binder.c pr_err("%s: %d %lx-%lx %s failed %d\n", __func__, pr_err 252 drivers/android/binder_alloc.c pr_err("%d: binder_alloc_buf failed for page at %pK\n", pr_err 262 drivers/android/binder_alloc.c pr_err("%d: binder_alloc_buf failed to map page at %lx in userspace\n", pr_err 469 drivers/android/binder_alloc.c pr_err("%s: %d failed to alloc new buffer struct\n", pr_err 82 drivers/android/binder_alloc_selftest.c pr_err("alloc sizes: "); pr_err 86 drivers/android/binder_alloc_selftest.c pr_err("free seq: "); pr_err 106 drivers/android/binder_alloc_selftest.c pr_err("expect alloc but is %s at page index %d\n", pr_err 149 drivers/android/binder_alloc_selftest.c pr_err("expect lru but is %s at page index %d\n", pr_err 168 drivers/android/binder_alloc_selftest.c pr_err("expect free but is %s at page index %d\n", pr_err 187 drivers/android/binder_alloc_selftest.c pr_err("lru list should be empty but is not\n"); pr_err 313 drivers/android/binderfs.c pr_err("Invalid mount options\n"); pr_err 332 drivers/android/binderfs.c pr_err("Binderfs stats mode cannot be changed during a remount\n"); pr_err 1046 drivers/ata/libata-scsi.c pr_err("ata%u: translated ATA stat/err 0x%02x/%02x to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", pr_err 317 drivers/ata/pata_bk3710.c pr_err(DRV_NAME ": failed to get IRQ resource\n"); pr_err 140 drivers/ata/pata_falcon.c pr_err(DRV_NAME ": resources busy\n"); pr_err 148 drivers/ata/pata_gayle.c pr_err(DRV_NAME ": resources busy\n"); pr_err 865 drivers/ata/pata_hpt37x.c pr_err("Unknown HPT366 subtype, please report (%d)\n", pr_err 906 drivers/ata/pata_hpt37x.c pr_err("PCI table is bogus, please report (%d)\n", dev->device); pr_err 1010 drivers/ata/pata_hpt37x.c pr_err("DPLL did not stabilize!\n"); pr_err 533 drivers/ata/pata_hpt3x2n.c pr_err("PCI table is bogus, please report (%d)\n", dev->device); pr_err 582 drivers/ata/pata_hpt3x2n.c pr_err("DPLL did not stabilize!\n"); pr_err 256 drivers/ata/sata_gemini.c pr_err("failed to enable SATA0 PCLK\n"); pr_err 261 drivers/ata/sata_gemini.c pr_err("failed to enable SATA1 PCLK\n"); pr_err 194 drivers/ata/sata_rcar.c pr_err("%s timeout\n", __func__); pr_err 1227 drivers/ata/sata_sx4.c pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n", pr_err 1373 drivers/ata/sata_sx4.c pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n", pr_err 126 drivers/auxdisplay/ks0108.c pr_err("ERROR: parport didn't register new device\n"); pr_err 130 drivers/auxdisplay/ks0108.c pr_err("could not claim access to parport %i. Aborting.\n", pr_err 150 drivers/auxdisplay/ks0108.c pr_err("%s: already unregistered.\n", KS0108_NAME); pr_err 1581 drivers/auxdisplay/panel.c pr_err("%s: port->number=%d parport=%d, already registered!\n", pr_err 1592 drivers/auxdisplay/panel.c pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n", pr_err 1598 drivers/auxdisplay/panel.c pr_err("could not claim access to parport%d. Aborting.\n", pr_err 1637 drivers/auxdisplay/panel.c pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n", pr_err 1764 drivers/auxdisplay/panel.c pr_err("panel driver disabled.\n"); pr_err 1770 drivers/auxdisplay/panel.c pr_err("could not register with parport. Aborting.\n"); pr_err 67 drivers/base/arch_topology.c pr_err("%s: too early to get CPU%d device!\n", pr_err 155 drivers/base/arch_topology.c pr_err("cpu_capacity: missing %pOF raw capacity\n", pr_err 157 drivers/base/arch_topology.c pr_err("cpu_capacity: partial information: fallback to 1024 for all CPUs\n"); pr_err 290 drivers/base/arch_topology.c pr_err("%pOF: Can't get CPU for thread\n", pr_err 303 drivers/base/arch_topology.c pr_err("%pOF: Core has both threads and CPU\n", pr_err 311 drivers/base/arch_topology.c pr_err("%pOF: Can't get CPU for leaf core\n", core); pr_err 356 drivers/base/arch_topology.c pr_err("%pOF: cpu-map children should be clusters\n", pr_err 365 drivers/base/arch_topology.c pr_err("%pOF: Non-leaf cluster with core %s\n", pr_err 394 drivers/base/arch_topology.c pr_err("No CPU information found in DT\n"); pr_err 170 drivers/base/cacheinfo.c pr_err("No cpu device for CPU %d\n", cpu); pr_err 175 drivers/base/cacheinfo.c pr_err("Failed to find cpu%d device node\n", cpu); pr_err 40 drivers/base/container.c pr_err("%s() failed: %d\n", __func__, ret); pr_err 608 drivers/base/cpu.c pr_err("Unable to register CPU vulnerabilities\n"); pr_err 152 drivers/base/driver.c pr_err("Driver '%s' was unable to register with bus_type '%s' because the bus was not initialized.\n", pr_err 781 drivers/base/platform.c pr_err("%s: drivers registered with %s can not be probed asynchronously\n", pr_err 906 drivers/base/platform.c pr_err("failed to register platform driver %ps: %d\n", pr_err 351 drivers/base/power/domain.c pr_err("%s: Failed to roll back to %d performance state\n", pr_err 1857 drivers/base/power/domain.c pr_err("Provider present, unable to remove %s\n", genpd->name); pr_err 1863 drivers/base/power/domain.c pr_err("%s: unable to remove %s\n", __func__, genpd->name); pr_err 1986 drivers/base/power/domain.c pr_err("%s: invalid domain index %u\n", __func__, idx); pr_err 2628 drivers/base/power/domain.c pr_err("Parsing idle state node %pOF failed with err %d\n", pr_err 449 drivers/base/power/main.c pr_err("Device %s failed to %s%s: error %d\n", pr_err 2065 drivers/base/power/main.c pr_err("%s(): %pS returns %d\n", function, fn, ret); pr_err 77 drivers/base/syscore.c pr_err("PM: System core suspend callback %pS failed.\n", ops->suspend); pr_err 121 drivers/base/test/test_async_driver_probe.c pr_err("failed to create async_dev: %d\n", err); pr_err 132 drivers/base/test/test_async_driver_probe.c pr_err("Failed to register async_driver: %d\n", err); pr_err 140 drivers/base/test/test_async_driver_probe.c pr_err("test failed: probe took too long\n"); pr_err 157 drivers/base/test/test_async_driver_probe.c pr_err("failed to create async_dev: %d\n", err); pr_err 186 drivers/base/test/test_async_driver_probe.c pr_err("failed to create sync_dev: %d\n", err); pr_err 196 drivers/base/test/test_async_driver_probe.c pr_err("Failed to register async_driver: %d\n", err); pr_err 220 drivers/base/test/test_async_driver_probe.c pr_err("failed to create sync_dev: %d\n", err); pr_err 248 drivers/base/test/test_async_driver_probe.c pr_err("async events still pending, forcing timeout\n"); pr_err 278 drivers/base/test/test_async_driver_probe.c pr_err("Test failed with %d errors and %d warnings\n", pr_err 544 drivers/bcma/driver_pci_host.c pr_err("PCI: BCMA bridge enable failed\n"); pr_err 573 drivers/bcma/driver_pci_host.c pr_err("PCI: Problem fixing up the addresses on %s\n", pr_err 675 drivers/bcma/main.c pr_err("SoC host initialization failed\n"); pr_err 681 drivers/bcma/main.c pr_err("PCI host initialization failed\n"); pr_err 169 drivers/bcma/sprom.c pr_err("Unsupported SPROM revision: %d\n", revision); pr_err 310 drivers/block/aoe/aoeblk.c pr_err("aoe: disk not up\n"); pr_err 367 drivers/block/aoe/aoeblk.c pr_err("aoe: cannot allocate disk structure for %ld.%d\n", pr_err 389 drivers/block/aoe/aoeblk.c pr_err("aoe: cannot allocate tag set for %ld.%d\n", pr_err 396 drivers/block/aoe/aoeblk.c pr_err("aoe: cannot allocate block queue for %ld.%d\n", pr_err 96 drivers/block/aoe/aoechr.c pr_err("aoe: invalid device specification %s\n", buf); pr_err 592 drivers/block/aoe/aoecmd.c pr_err("%s %pm for e%ld.%d: %s\n", pr_err 866 drivers/block/aoe/aoecmd.c pr_err("aoe: nextbuf: unable to mempool_alloc!\n"); pr_err 1109 drivers/block/aoe/aoecmd.c pr_err("aoe: ata error cmd=%2.2Xh stat=%2.2Xh from e%ld.%d\n", pr_err 1122 drivers/block/aoe/aoecmd.c pr_err("%s e%ld.%d. skb->len=%d need=%ld\n", pr_err 1513 drivers/block/aoe/aoecmd.c pr_err("aoe: device setifbcnt failure; too many interfaces.\n"); pr_err 72 drivers/block/aoe/aoedev.c pr_err("aoe: %s %d slots per shelf\n", pr_err 81 drivers/block/aoe/aoedev.c pr_err("aoe: %s with e%ld.%d\n", pr_err 90 drivers/block/aoe/aoedev.c pr_err("aoe: %s %lu\n", pr_err 2961 drivers/block/drbd/drbd_main.c pr_err("invalid minor_count (%d)\n", drbd_minor_count); pr_err 2971 drivers/block/drbd/drbd_main.c pr_err("unable to register block device major %d\n", pr_err 2989 drivers/block/drbd/drbd_main.c pr_err("unable to register generic netlink family\n"); pr_err 3000 drivers/block/drbd/drbd_main.c pr_err("unable to register proc file\n"); pr_err 3006 drivers/block/drbd/drbd_main.c pr_err("unable to create retry workqueue\n"); pr_err 3025 drivers/block/drbd/drbd_main.c pr_err("ran out of memory\n"); pr_err 3027 drivers/block/drbd/drbd_main.c pr_err("initialization failure\n"); pr_err 92 drivers/block/drbd/drbd_nl.c pr_err("error sending genl reply\n"); pr_err 4898 drivers/block/drbd/drbd_nl.c pr_err("Error %d sending event. Event seq:%u\n", err, seq); pr_err 4393 drivers/block/mtip32xx/mtip32xx.c pr_err("Unable to register block device (%d)\n", pr_err 4409 drivers/block/mtip32xx/mtip32xx.c pr_err("Error creating device_status node\n"); pr_err 102 drivers/block/null_blk.h pr_err("CONFIG_BLK_DEV_ZONED not enabled\n"); pr_err 1765 drivers/block/null_blk_main.c pr_err("zone_size must be power-of-two\n"); pr_err 1770 drivers/block/null_blk_main.c pr_err("invalid home_node value\n"); pr_err 1775 drivers/block/null_blk_main.c pr_err("legacy IO path no longer available\n"); pr_err 20 drivers/block/null_blk_zoned.c pr_err("zone_size must be power-of-two\n"); pr_err 24 drivers/block/null_blk_zoned.c pr_err("Zone size larger than device capacity\n"); pr_err 719 drivers/block/paride/pcd.c pr_err("failed to register %s driver\n", name); pr_err 960 drivers/block/paride/pd.c pr_err("failed to register %s driver\n", name); pr_err 732 drivers/block/paride/pf.c pr_err("failed to register %s driver\n", name); pr_err 487 drivers/block/paride/pg.c pr_err("failed to register %s driver\n", name); pr_err 611 drivers/block/paride/pt.c pr_err("failed to register %s driver\n", name); pr_err 76 drivers/block/pktcdvd.c pr_err("%s: " fmt, pd->name, ##__VA_ARGS__) pr_err 434 drivers/block/pktcdvd.c pr_err("failed to create class pktcdvd\n"); pr_err 2441 drivers/block/pktcdvd.c pr_err("%s incorrect request queue\n", bio_devname(bio, b)); pr_err 2711 drivers/block/pktcdvd.c pr_err("max %d writers supported\n", MAX_WRITERS); pr_err 2783 drivers/block/pktcdvd.c pr_err("setup of pktcdvd device failed\n"); pr_err 2939 drivers/block/pktcdvd.c pr_err("unable to register block device\n"); pr_err 2953 drivers/block/pktcdvd.c pr_err("unable to register misc device\n"); pr_err 846 drivers/block/ps3vram.c pr_err("%s: register_blkdev failed %d\n", DEVICE_NAME, error); pr_err 889 drivers/block/rbd.c pr_err("bad option arg (not int) at '%s'\n", c); pr_err 902 drivers/block/rbd.c pr_err("queue_depth out of range\n"); pr_err 909 drivers/block/rbd.c pr_err("alloc_size out of range\n"); pr_err 913 drivers/block/rbd.c pr_err("alloc_size must be a power of 2\n"); pr_err 921 drivers/block/rbd.c pr_err("lock_timeout out of range\n"); pr_err 7215 drivers/block/rbd.c pr_err("dev_id out of range\n"); pr_err 7222 drivers/block/rbd.c pr_err("bad remove option at '%s'\n", opt_buf); pr_err 47 drivers/block/skd_main.c pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ pr_err 3619 drivers/block/skd_main.c pr_err(PFX "skd_isr_type %d invalid, re-set to %d\n", pr_err 3626 drivers/block/skd_main.c pr_err(PFX "skd_max_queue_depth %d invalid, re-set to %d\n", pr_err 3633 drivers/block/skd_main.c pr_err(PFX "skd_max_req_per_msg %d invalid, re-set to %d\n", pr_err 3639 drivers/block/skd_main.c pr_err(PFX "skd_sg_per_request %d invalid, re-set to %d\n", pr_err 3645 drivers/block/skd_main.c pr_err(PFX "skd_dbg_level %d invalid, re-set to %d\n", pr_err 3651 drivers/block/skd_main.c pr_err(PFX "skd_isr_comp_limit %d invalid, set to %d\n", pr_err 1189 drivers/block/sunvdc.c pr_err(PFX "%s vio_ldc_alloc:%d\n", port->disk_name, err); pr_err 1195 drivers/block/sunvdc.c pr_err(PFX "%s vio_alloc_tx_ring:%d\n", port->disk_name, err); pr_err 79 drivers/block/z2ram.c pr_err(DEVICE_NAME ": bad access: block=%llu, " pr_err 168 drivers/block/zram/zcomp.c pr_err("Can't allocate a compression stream\n"); pr_err 1268 drivers/block/zram/zram_drv.c pr_err("Decompression failed! err=%d, page=%u\n", ret, index); pr_err 1337 drivers/block/zram/zram_drv.c pr_err("Compression failed! err=%d\n", ret); pr_err 1732 drivers/block/zram/zram_drv.c pr_err("Cannot initialise %s compressing backend\n", pr_err 1896 drivers/block/zram/zram_drv.c pr_err("Error allocating disk queue for device %d\n", pr_err 1907 drivers/block/zram/zram_drv.c pr_err("Error allocating disk structure for device %d\n", pr_err 2099 drivers/block/zram/zram_drv.c pr_err("Unable to register zram-control class\n"); pr_err 2107 drivers/block/zram/zram_drv.c pr_err("Unable to get major number\n"); pr_err 341 drivers/bus/brcmstb_gisb.c pr_err("failed to look up compatible string\n"); pr_err 301 drivers/bus/fsl-mc/fsl-mc-bus.c pr_err("driver_register() failed for %s: %d\n", pr_err 940 drivers/bus/fsl-mc/fsl-mc-bus.c pr_err("bus type registration failed: %d\n", error); pr_err 946 drivers/bus/fsl-mc/fsl-mc-bus.c pr_err("platform_driver_register() failed: %d\n", error); pr_err 189 drivers/bus/fsl-mc/fsl-mc-msi.c pr_err("Unable to find fsl-mc MSI domain for %pOF\n", pr_err 396 drivers/bus/mips_cdmm.c pr_err("cdmm%u: Failed to choose a physical base\n", pr_err 857 drivers/bus/moxtet.c pr_err("moxtet bus registration failed: %d\n", ret); pr_err 863 drivers/bus/moxtet.c pr_err("moxtet spi driver registration failed: %d\n", ret); pr_err 910 drivers/bus/mvebu-mbus.c pr_err("cannot add window '%x:%x', conflicts with another window\n", pr_err 959 drivers/bus/mvebu-mbus.c pr_err("missing DRAM information\n"); pr_err 975 drivers/bus/mvebu-mbus.c pr_err("invalid dram address %pa\n", &phyaddr); pr_err 1158 drivers/bus/mvebu-mbus.c pr_err("could not find a matching SoC family\n"); pr_err 1188 drivers/bus/mvebu-mbus.c pr_err("cannot add window '%04x:%04x', conflicts with another window\n", pr_err 1195 drivers/bus/mvebu-mbus.c pr_err("cannot add window '%04x:%04x', too many windows\n", pr_err 1317 drivers/bus/mvebu-mbus.c pr_err("could not find a matching SoC family\n"); pr_err 1325 drivers/bus/mvebu-mbus.c pr_err("required 'controller' property missing\n"); pr_err 1331 drivers/bus/mvebu-mbus.c pr_err("could not find an 'mbus-controller' node\n"); pr_err 1336 drivers/bus/mvebu-mbus.c pr_err("cannot get MBUS register address\n"); pr_err 1341 drivers/bus/mvebu-mbus.c pr_err("cannot get SDRAM register address\n"); pr_err 148 drivers/bus/omap_l3_smx.c pr_err("%s seen by %s %s at address %x\n", pr_err 765 drivers/bus/sunxi-rsb.c pr_err("failed to register sunxi sunxi_rsb bus: %d\n", ret); pr_err 785 drivers/cdrom/cdrom.c pr_err("failed setting lba address space\n"); pr_err 446 drivers/cdrom/gdrom.c pr_err("Unknown sense key: %d\n", sense_key); pr_err 165 drivers/char/hw_random/amd-rng.c pr_err(DRV_NAME "Cannot map ioport\n"); pr_err 177 drivers/char/hw_random/amd-rng.c pr_err(DRV_NAME " registering failed (%d)\n", err); pr_err 452 drivers/char/hw_random/core.c pr_err("hwrng_fill thread creation failed\n"); pr_err 115 drivers/char/hw_random/geode-rng.c pr_err(PFX "RNG registering failed (%d)\n", pr_err 202 drivers/char/hw_random/intel-rng.c pr_err(PFX "cannot enable RNG, aborting\n"); pr_err 397 drivers/char/hw_random/intel-rng.c pr_err(PFX "RNG registering failed (%d)\n", pr_err 44 drivers/char/hw_random/omap3-rom-rng.c pr_err("reset failed: %d\n", r); pr_err 65 drivers/char/hw_random/omap3-rom-rng.c pr_err("HW init failed: %d\n", r); pr_err 106 drivers/char/hw_random/omap3-rom-rng.c pr_err("omap3_rom_rng_call is NULL\n"); pr_err 113 drivers/char/hw_random/omap3-rom-rng.c pr_err("unable to get RNG clock\n"); pr_err 140 drivers/char/hw_random/via-rng.c pr_err(PFX "can't enable hardware RNG " pr_err 179 drivers/char/hw_random/via-rng.c pr_err(PFX "cannot enable VIA C3 RNG, aborting\n"); pr_err 205 drivers/char/hw_random/via-rng.c pr_err(PFX "RNG registering failed (%d)\n", pr_err 818 drivers/char/ipmi/ipmi_devintf.c pr_err("ipmi_devintf: Unable to create the ipmi class device link\n"); pr_err 864 drivers/char/ipmi/ipmi_devintf.c pr_err("ipmi: can't register device class\n"); pr_err 871 drivers/char/ipmi/ipmi_devintf.c pr_err("ipmi: can't get major %d\n", ipmi_major); pr_err 66 drivers/char/ipmi/ipmi_dmi.c pr_err("Invalid IPMI type: %d\n", type); pr_err 144 drivers/char/ipmi/ipmi_dmi.c pr_err("Base address is zero, assuming no IPMI interface\n"); pr_err 192 drivers/char/ipmi/ipmi_dmi.c pr_err("Invalid offset: 0\n"); pr_err 5129 drivers/char/ipmi/ipmi_msghandler.c pr_err("Could not register IPMI driver\n"); pr_err 50 drivers/char/ipmi/ipmi_plat_data.c pr_err("Error allocating IPMI platform device %s.%d\n", pr_err 206 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to send ATCA, IPMI error 0x%x\n", rv); pr_err 283 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to send ATCA powerdown message, IPMI error 0x%x\n", pr_err 503 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to send chassis power cycle message, IPMI error 0x%x\n", pr_err 509 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to send chassis power down message, IPMI error 0x%x\n", pr_err 572 drivers/char/ipmi/ipmi_poweroff.c pr_err("could not create IPMI user, error %d\n", rv); pr_err 594 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to send IPMI get device id info, IPMI error 0x%x\n", pr_err 600 drivers/char/ipmi/ipmi_poweroff.c pr_err("(chassis) IPMI get device id info too short, was %d bytes, needed %d bytes\n", pr_err 621 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to find a poweroff function that will work, giving up\n"); pr_err 698 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to register powercycle sysctl\n"); pr_err 709 drivers/char/ipmi/ipmi_poweroff.c pr_err("Unable to register SMI watcher: %d\n", rv); pr_err 732 drivers/char/ipmi/ipmi_poweroff.c pr_err("could not cleanup the IPMI user: 0x%x\n", rv); pr_err 1979 drivers/char/ipmi/ipmi_si_intf.c pr_err("IPMI interface added with no device\n"); pr_err 164 drivers/char/ipmi/ipmi_si_pci.c pr_err("Unable to register PCI driver: %d\n", rv); pr_err 473 drivers/char/ipmi/ipmi_si_platform.c pr_err("Unable to register driver: %d\n", rv); pr_err 2159 drivers/char/ipmi/ipmi_ssif.c pr_err("Couldn't add hardcoded device at addr 0x%x\n", pr_err 2170 drivers/char/ipmi/ipmi_ssif.c pr_err("Unable to register driver: %d\n", rv); pr_err 586 drivers/char/ipmi/ipmi_watchdog.c pr_err("Unable to restore the IPMI watchdog's settings, giving up\n"); pr_err 601 drivers/char/ipmi/ipmi_watchdog.c pr_err("Unable to send the command to set the watchdog's settings, giving up\n"); pr_err 915 drivers/char/ipmi/ipmi_watchdog.c pr_err("response: Error %x on cmd %x\n", pr_err 301 drivers/char/ipmi/kcs_bmc.c pr_err("channel=%u with too large data : %zu\n", pr_err 284 drivers/char/misc.c pr_err("unable to get major %d for misc devices\n", MISC_MAJOR); pr_err 520 drivers/char/nvram.c pr_err("nvram: can't misc_register on minor=%d\n", NVRAM_MINOR); pr_err 526 drivers/char/nvram.c pr_err("nvram: can't create /proc/driver/nvram\n"); pr_err 815 drivers/char/ppdev.c pr_err("Failed to create device parport%d\n", pr_err 420 drivers/char/toshiba.c pr_err("toshiba: not a supported Toshiba laptop\n"); pr_err 436 drivers/char/toshiba.c pr_err("toshiba: not a supported Toshiba laptop\n"); pr_err 37 drivers/char/tpm/eventlog/efi.c pr_err("Could not map UEFI TPM log table !\n"); pr_err 47 drivers/char/tpm/eventlog/efi.c pr_err("Could not map UEFI TPM log table payload!\n"); pr_err 72 drivers/char/tpm/eventlog/efi.c pr_err("Could not map UEFI TPM final log\n"); pr_err 518 drivers/char/tpm/tpm-interface.c pr_err("couldn't create tpm class\n"); pr_err 524 drivers/char/tpm/tpm-interface.c pr_err("couldn't create tpmrm class\n"); pr_err 531 drivers/char/tpm/tpm-interface.c pr_err("tpm: failed to allocate char dev region\n"); pr_err 537 drivers/char/tpm/tpm-interface.c pr_err("tpm: failed to allocate char dev region\n"); pr_err 712 drivers/char/tpm/tpm_vtpm_proxy.c pr_err("couldn't create vtpmx device\n"); pr_err 718 drivers/char/tpm/tpm_vtpm_proxy.c pr_err("couldn't create workqueue\n"); pr_err 2242 drivers/char/virtio_console.c pr_err("Error %d creating virtio-ports class\n", err); pr_err 2254 drivers/char/virtio_console.c pr_err("Error %d registering virtio driver\n", err); pr_err 2259 drivers/char/virtio_console.c pr_err("Error %d registering virtio rproc serial driver\n", pr_err 1431 drivers/char/xillybus/xillybus_core.c pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n", pr_err 55 drivers/clk/actions/owl-common.c pr_err("failed to init regmap\n"); pr_err 238 drivers/clk/analogbits/wrpll-cln28hpc.c pr_err("%s: PLL input rate is out of range\n", pr_err 74 drivers/clk/at91/clk-utmi.c pr_err("UTMICK: unsupported mainck rate\n"); pr_err 82 drivers/clk/at91/clk-utmi.c pr_err("UTMICK: sfr node required\n"); pr_err 74 drivers/clk/at91/pmc.c pr_err("%s: invalid type (%u) or index (%u)\n", __func__, type, idx); pr_err 285 drivers/clk/axs10x/pll_clock.c pr_err("failed to map pll div registers\n"); pr_err 291 drivers/clk/axs10x/pll_clock.c pr_err("failed to map pll lock register\n"); pr_err 305 drivers/clk/axs10x/pll_clock.c pr_err("failed to register %pOFn clock\n", node); pr_err 311 drivers/clk/axs10x/pll_clock.c pr_err("failed to add hw provider for %pOFn clock\n", node); pr_err 141 drivers/clk/bcm/clk-bcm53573-ilp.c pr_err("Failed to init ILP clock: %d\n", err); pr_err 347 drivers/clk/bcm/clk-iproc-pll.c pr_err("%s: pll: %s has invalid rate: %lu\n", __func__, pr_err 354 drivers/clk/bcm/clk-iproc-pll.c pr_err("%s: pll: %s has invalid kp\n", __func__, clk_name); pr_err 360 drivers/clk/bcm/clk-iproc-pll.c pr_err("%s: pll: %s fails to enable\n", __func__, clk_name); pr_err 430 drivers/clk/bcm/clk-iproc-pll.c pr_err("%s: pll: %s failed to lock\n", __func__, clk_name); pr_err 35 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad policy enable offset for %s " pr_err 41 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad policy control offset for %s " pr_err 101 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad policy offset for %s (%u > %u)\n", pr_err 111 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad gate offset for %s (%u > %u)\n", pr_err 118 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad hysteresis offset for %s " pr_err 125 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: hysteresis but no gate for %s\n", __func__, name); pr_err 132 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad divider offset for %s (%u > %u)\n", pr_err 141 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad pre-divider offset for %s " pr_err 151 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad selector offset for %s (%u > %u)\n", pr_err 160 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad trigger offset for %s (%u > %u)\n", pr_err 169 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad pre-trigger offset for %s (%u > %u)\n", pr_err 185 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad %s bit for %s (%u > %u)\n", __func__, pr_err 205 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad %s field width 0 for %s\n", __func__, pr_err 210 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad %s for %s (%u + %u > %u)\n", __func__, pr_err 312 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad selector for %s " pr_err 341 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: bad %s fixed value 0 for %s\n", __func__, pr_err 443 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: multiple parents but no selector for %s\n", pr_err 459 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: pre-divider but no divider for %s\n", __func__, pr_err 480 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: pre-trigger but no trigger for %s\n", __func__, pr_err 484 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: required trigger missing for %s\n", __func__, pr_err 500 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: unrecognized clock type (%d)\n", __func__, pr_err 568 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: too many parents (%u > %u)\n", __func__, pr_err 634 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: error processing parent clocks for %s (%d)\n", pr_err 719 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: clock type %d invalid for %s\n", __func__, pr_err 726 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: clock data invalid for %s\n", __func__, pr_err 735 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: error registering clock %s (%d)\n", __func__, pr_err 790 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 811 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: no valid CCU registers found for %pOFn\n", __func__, pr_err 818 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: address range too large for %pOFn\n", __func__, pr_err 826 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: ccu data not valid for %pOFn\n", __func__, node); pr_err 832 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: unable to map CCU registers for %pOFn\n", __func__, pr_err 851 drivers/clk/bcm/clk-kona-setup.c pr_err("%s: error adding ccu %pOFn as provider (%d)\n", __func__, pr_err 857 drivers/clk/bcm/clk-kona-setup.c pr_err("Broadcom %pOFn initialization had errors\n", node); pr_err 862 drivers/clk/bcm/clk-kona-setup.c pr_err("Broadcom %pOFn setup aborted\n", node); pr_err 162 drivers/clk/bcm/clk-kona.c pr_err("%s: access already enabled for %s\n", __func__, pr_err 173 drivers/clk/bcm/clk-kona.c pr_err("%s: access wasn't enabled for %s\n", __func__, pr_err 232 drivers/clk/bcm/clk-kona.c pr_err("%s: ccu %s policy engine wouldn't go idle\n", pr_err 262 drivers/clk/bcm/clk-kona.c pr_err("%s: ccu %s policy engine never started\n", pr_err 284 drivers/clk/bcm/clk-kona.c pr_err("%s: ccu %s policy engine already stopped\n", pr_err 295 drivers/clk/bcm/clk-kona.c pr_err("%s: ccu %s policy engine never stopped\n", pr_err 325 drivers/clk/bcm/clk-kona.c pr_err("%s: unable to stop CCU %s policy engine\n", pr_err 348 drivers/clk/bcm/clk-kona.c pr_err("%s: unable to restart CCU %s policy engine\n", pr_err 512 drivers/clk/bcm/clk-kona.c pr_err("%s: failed to %s gate for %s\n", __func__, pr_err 861 drivers/clk/bcm/clk-kona.c pr_err("%s: out-of-range parent selector %u (%s 0x%04x)\n", pr_err 1106 drivers/clk/bcm/clk-kona.c pr_err("%s: gating failure for %s\n", __func__, pr_err 1110 drivers/clk/bcm/clk-kona.c pr_err("%s: %strigger failed for %s\n", __func__, pr_err 1171 drivers/clk/bcm/clk-kona.c pr_err("%s: gating failure for %s\n", __func__, pr_err 1175 drivers/clk/bcm/clk-kona.c pr_err("%s: trigger failed for %s\n", __func__, pr_err 1204 drivers/clk/bcm/clk-kona.c pr_err("%s: error initializing policy for %s\n", pr_err 1209 drivers/clk/bcm/clk-kona.c pr_err("%s: error initializing gate for %s\n", __func__, name); pr_err 1213 drivers/clk/bcm/clk-kona.c pr_err("%s: error initializing hyst for %s\n", __func__, name); pr_err 1217 drivers/clk/bcm/clk-kona.c pr_err("%s: error initializing divider for %s\n", __func__, pr_err 1230 drivers/clk/bcm/clk-kona.c pr_err("%s: error initializing pre-divider for %s\n", __func__, pr_err 1236 drivers/clk/bcm/clk-kona.c pr_err("%s: error initializing selector for %s\n", __func__, pr_err 671 drivers/clk/berlin/bg2.c pr_err("%pOF: Unable to register leaf clock %d\n", np, n); pr_err 296 drivers/clk/berlin/bg2q.c pr_err("%pOF: Unable to map global base\n", np); pr_err 303 drivers/clk/berlin/bg2q.c pr_err("%pOF: Unable to map cpupll base\n", np); pr_err 368 drivers/clk/berlin/bg2q.c pr_err("%pOF: Unable to register leaf clock %d\n", np, n); pr_err 329 drivers/clk/clk-asm9260.c pr_err("%pOF: Unable to register leaf clock %d\n", pr_err 689 drivers/clk/clk-aspeed.c pr_err("no syscon regmap\n"); pr_err 700 drivers/clk/clk-aspeed.c pr_err("failed to read strapping register\n"); pr_err 709 drivers/clk/clk-aspeed.c pr_err("unknown platform, failed to add clocks\n"); pr_err 714 drivers/clk/clk-aspeed.c pr_err("failed to add DT provider: %d\n", ret); pr_err 695 drivers/clk/clk-ast2600.c pr_err("no syscon regmap\n"); pr_err 703 drivers/clk/clk-ast2600.c pr_err("failed to add DT provider: %d\n", ret); pr_err 520 drivers/clk/clk-axm5516.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 31 drivers/clk/clk-bulk.c pr_err("%pOF: Failed to get clk index: %d ret: %d\n", pr_err 185 drivers/clk/clk-bulk.c pr_err("Failed to prepare clk '%s': %d\n", pr_err 235 drivers/clk/clk-bulk.c pr_err("Failed to enable clk '%s': %d\n", pr_err 623 drivers/clk/clk-cdce706.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 599 drivers/clk/clk-cdce925.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 138 drivers/clk/clk-clps711x.c pr_err("clk %i: register failed with %ld\n", pr_err 113 drivers/clk/clk-composite.c pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n"); pr_err 23 drivers/clk/clk-conf.c pr_err("clk: invalid value of clock-parents property at %pOF\n", pr_err 65 drivers/clk/clk-conf.c pr_err("clk: failed to reparent %s to %s: %d\n", pr_err 109 drivers/clk/clk-conf.c pr_err("clk: couldn't set %s clk rate to %u (%d), current rate: %lu\n", pr_err 171 drivers/clk/clk-fixed-factor.c pr_err("%s Fixed factor clock <%pOFn> must have a clock-div property\n", pr_err 177 drivers/clk/clk-fixed-factor.c pr_err("%s Fixed factor clock <%pOFn> must have a clock-mult property\n", pr_err 28 drivers/clk/clk-fixed-mmio.c pr_err("%pOFn: failed to map address\n", node); pr_err 38 drivers/clk/clk-fixed-mmio.c pr_err("%pOFn: failed to register fixed rate clock\n", node); pr_err 44 drivers/clk/clk-fixed-mmio.c pr_err("%pOFn: failed to add clock provider\n", node); pr_err 149 drivers/clk/clk-gate.c pr_err("gate bit exceeds LOWORD field\n"); pr_err 417 drivers/clk/clk-gemini.c pr_err("no syscon regmap\n"); pr_err 428 drivers/clk/clk-gemini.c pr_err("failed to read global status register\n"); pr_err 216 drivers/clk/clk-gpio.c pr_err("mux-clock %s must have 2 parents\n", name); pr_err 271 drivers/clk/clk-gpio.c pr_err("%pOFn: %s: Can't get '%s' named GPIO property\n", pr_err 368 drivers/clk/clk-hsdk-pll.c pr_err("failed to map pll registers\n"); pr_err 374 drivers/clk/clk-hsdk-pll.c pr_err("failed to map pll registers\n"); pr_err 384 drivers/clk/clk-hsdk-pll.c pr_err("too much clock parents: %u\n", num_parents); pr_err 394 drivers/clk/clk-hsdk-pll.c pr_err("failed to register %pOFn clock\n", node); pr_err 400 drivers/clk/clk-hsdk-pll.c pr_err("failed to add hw provider for %pOFn clock\n", node); pr_err 154 drivers/clk/clk-max77686.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 439 drivers/clk/clk-milbeaut.c pr_err("%s:%s couldn't stabilize\n", pr_err 33 drivers/clk/clk-moxart.c pr_err("%pOF: of_iomap failed\n", node); pr_err 42 drivers/clk/clk-moxart.c pr_err("%pOF: of_clk_get failed\n", node); pr_err 48 drivers/clk/clk-moxart.c pr_err("%pOF: failed to register clock\n", node); pr_err 73 drivers/clk/clk-moxart.c pr_err("%pOF: of_iomap failed\n", node); pr_err 86 drivers/clk/clk-moxart.c pr_err("%pOF: of_clk_get failed\n", node); pr_err 92 drivers/clk/clk-moxart.c pr_err("%pOF: failed to register clock\n", node); pr_err 163 drivers/clk/clk-mux.c pr_err("mux value exceeds LOWORD field\n"); pr_err 100 drivers/clk/clk-nomadik.c pr_err("%s: must have src parent node with REGS (%pOFn)\n", pr_err 265 drivers/clk/clk-nomadik.c pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__); pr_err 510 drivers/clk/clk-nomadik.c pr_err("%s: PLL \"%s\" missing pll-id property\n", pr_err 557 drivers/clk/clk-nomadik.c pr_err("%s: SRC clock \"%s\" missing clock-id property\n", pr_err 47 drivers/clk/clk-npcm7xx.c pr_err("%s: parent rate is zero", __func__); pr_err 552 drivers/clk/clk-npcm7xx.c pr_err("%pOFn: failed to get resource, ret %d\n", clk_np, pr_err 578 drivers/clk/clk-npcm7xx.c pr_err("npcm7xx_clk: Can't register pll\n"); pr_err 590 drivers/clk/clk-npcm7xx.c pr_err("npcm7xx_clk: Can't register fixed div\n"); pr_err 597 drivers/clk/clk-npcm7xx.c pr_err("npcm7xx_clk: Can't register div2\n"); pr_err 613 drivers/clk/clk-npcm7xx.c pr_err("npcm7xx_clk: Can't register mux\n"); pr_err 632 drivers/clk/clk-npcm7xx.c pr_err("npcm7xx_clk: Can't register div table\n"); pr_err 643 drivers/clk/clk-npcm7xx.c pr_err("failed to add DT provider: %d\n", ret); pr_err 810 drivers/clk/clk-qoriq.c pr_err("%s: mux at %p has bad clksel\n", __func__, hwc->reg); pr_err 897 drivers/clk/clk-qoriq.c pr_err("%s: Couldn't register %s: %ld\n", __func__, name, pr_err 1024 drivers/clk/clk-qoriq.c pr_err("%s: Couldn't register clk provider for node %pOFn: %d\n", pr_err 1050 drivers/clk/clk-qoriq.c pr_err("%s: Couldn't register %s: %ld\n", __func__, name, pr_err 1103 drivers/clk/clk-qoriq.c pr_err("%s: No input sysclk\n", __func__); pr_err 1219 drivers/clk/clk-qoriq.c pr_err("%s: %s: register failed %ld\n", pr_err 1227 drivers/clk/clk-qoriq.c pr_err("%s: %s: register to lookup table failed %d\n", pr_err 1278 drivers/clk/clk-qoriq.c pr_err("%s: Couldn't register clk provider for node %pOFn: %d\n", pr_err 1325 drivers/clk/clk-qoriq.c pr_err("%s: insufficient phandle args\n", __func__); pr_err 1375 drivers/clk/clk-qoriq.c pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx); pr_err 1439 drivers/clk/clk-qoriq.c pr_err("%s(): %pOFn: of_iomap() failed\n", __func__, np); pr_err 1452 drivers/clk/clk-qoriq.c pr_err("%s: unknown clockgen node %pOF\n", __func__, np); pr_err 1465 drivers/clk/clk-qoriq.c pr_err("%s: Couldn't map %pOF regs\n", __func__, pr_err 1486 drivers/clk/clk-qoriq.c pr_err("%s: Couldn't register clk provider for node %pOFn: %d\n", pr_err 84 drivers/clk/clk-rk808.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 1344 drivers/clk/clk-si5351.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 1699 drivers/clk/clk-stm32f4.c pr_err("%pOFn: unable to map resource\n", np); pr_err 1829 drivers/clk/clk-stm32f4.c pr_err("%pOF: Unable to register leaf clock %s\n", pr_err 1839 drivers/clk/clk-stm32f4.c pr_err("Unable to register lsi clock\n"); pr_err 1847 drivers/clk/clk-stm32f4.c pr_err("Unable to register lse clock\n"); pr_err 1856 drivers/clk/clk-stm32f4.c pr_err("Unable to register hse-rtc clock\n"); pr_err 1864 drivers/clk/clk-stm32f4.c pr_err("Unable to register rtc clock\n"); pr_err 1219 drivers/clk/clk-stm32h7.c pr_err("%pOFn: unable to map resource", np); pr_err 2033 drivers/clk/clk-stm32mp1.c pr_err("Unable to register %s\n", cfg->name); pr_err 2055 drivers/clk/clk-stm32mp1.c pr_err("%s: match data not found\n", __func__); pr_err 2079 drivers/clk/clk-stm32mp1.c pr_err("%s: can't register %s\n", __func__, pr_err 2097 drivers/clk/clk-stm32mp1.c pr_err("%pOFn: unable to map resource", np); pr_err 883 drivers/clk/clk-u300.c pr_err("%s: syscon clock \"%s\" missing clock-type property\n", pr_err 888 drivers/clk/clk-u300.c pr_err("%s: syscon clock \"%s\" missing clock-id property\n", pr_err 908 drivers/clk/clk-u300.c pr_err("unknown clock type %x specified\n", clk_type); pr_err 62 drivers/clk/clk-vt8500.c pr_err("%s:of_iomap(pmc) failed\n", __func__); pr_err 182 drivers/clk/clk-vt8500.c pr_err("%s: invalid divisor for clock\n", __func__); pr_err 248 drivers/clk/clk-vt8500.c pr_err("%s: enable-bit property required for gated clock\n", pr_err 281 drivers/clk/clk-vt8500.c pr_err("%s: Invalid clock description in device tree\n", pr_err 357 drivers/clk/clk-vt8500.c pr_err("%s: requested rate out of range\n", __func__); pr_err 579 drivers/clk/clk-vt8500.c pr_err("%s: invalid pll type\n", __func__); pr_err 153 drivers/clk/clk-xgene.c pr_err("%s: could not register clk %s\n", __func__, name); pr_err 178 drivers/clk/clk-xgene.c pr_err("Unable to map CSR register for %pOF\n", np); pr_err 370 drivers/clk/clk-xgene.c pr_err("%s: could not register clk %s\n", __func__, name); pr_err 395 drivers/clk/clk-xgene.c pr_err("no DTS register for %pOF\n", np); pr_err 400 drivers/clk/clk-xgene.c pr_err("Unable to map resource for %pOF\n", np); pr_err 652 drivers/clk/clk-xgene.c pr_err("%s: could not register clk %s\n", __func__, name); pr_err 660 drivers/clk/clk-xgene.c pr_err("%s: could not register lookup clk %s\n", pr_err 687 drivers/clk/clk-xgene.c pr_err("no DTS register for %pOF\n", np); pr_err 694 drivers/clk/clk-xgene.c pr_err("Unable to map resource %d for %pOF\n", i, np); pr_err 729 drivers/clk/clk-xgene.c pr_err("%s: could register provider clk %pOF\n", __func__, np); pr_err 2292 drivers/clk/clk.c pr_err("%s: clk %s dev %s con %s: invalid range [%lu, %lu]\n", pr_err 3318 drivers/clk/clk.c pr_err("%s: %s must implement .round_rate or .determine_rate in addition to .recalc_rate\n", pr_err 3325 drivers/clk/clk.c pr_err("%s: %s must implement .get_parent & .set_parent\n", pr_err 3332 drivers/clk/clk.c pr_err("%s: %s must implement .get_parent as it has multi parents\n", pr_err 3340 drivers/clk/clk.c pr_err("%s: %s must implement .set_parent & .set_rate\n", pr_err 3910 drivers/clk/clk.c pr_err("%s: unregistered clock: %s\n", __func__, pr_err 4277 drivers/clk/clk.c pr_err("%s: invalid clock index %u\n", __func__, idx); pr_err 4292 drivers/clk/clk.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 149 drivers/clk/davinci/pll-da850.c pr_err("%s: ioremap failed\n", __func__); pr_err 28 drivers/clk/h8300/clk-div.c pr_err("%s: no parent found\n", clk_name); pr_err 34 drivers/clk/h8300/clk-div.c pr_err("%s: failed to map divide register\n", clk_name); pr_err 50 drivers/clk/h8300/clk-div.c pr_err("%s: failed to register %s div clock (%ld)\n", pr_err 97 drivers/clk/h8300/clk-h8s2678.c pr_err("%s: no parent found\n", clk_name); pr_err 108 drivers/clk/h8300/clk-h8s2678.c pr_err("%s: failed to map divide register\n", clk_name); pr_err 114 drivers/clk/h8300/clk-h8s2678.c pr_err("%s: failed to map multiply register\n", clk_name); pr_err 128 drivers/clk/h8300/clk-h8s2678.c pr_err("%s: failed to register %s div clock (%d)\n", pr_err 455 drivers/clk/hisilicon/clk-hi3620.c pr_err("failed to find pctrl node in DTS\n"); pr_err 461 drivers/clk/hisilicon/clk-hi3620.c pr_err("failed to map pctrl\n"); pr_err 117 drivers/clk/hisilicon/clk-hi3660-stub.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 591 drivers/clk/hisilicon/clk-hi3660.c pr_err("Failed to register crgctrl clock[%d] err=%ld\n", pr_err 290 drivers/clk/hisilicon/clk-hix5hd2.c pr_err("%s: failed to register clock %s\n", pr_err 67 drivers/clk/hisilicon/clk.c pr_err("%s: failed to map clock registers\n", __func__); pr_err 103 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 133 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 167 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 200 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 229 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 266 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 303 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 333 drivers/clk/hisilicon/clk.c pr_err("%s: failed to register clock %s\n", pr_err 42 drivers/clk/imgtec/clk-boston.c pr_err("failed to find regmap\n"); pr_err 48 drivers/clk/imgtec/clk-boston.c pr_err("failed to read mmcm_div register: %d\n", err); pr_err 71 drivers/clk/imgtec/clk-boston.c pr_err("failed to register input clock: %ld\n", PTR_ERR(hw)); pr_err 78 drivers/clk/imgtec/clk-boston.c pr_err("failed to register sys clock: %ld\n", PTR_ERR(hw)); pr_err 85 drivers/clk/imgtec/clk-boston.c pr_err("failed to register cpu clock: %ld\n", PTR_ERR(hw)); pr_err 92 drivers/clk/imgtec/clk-boston.c pr_err("failed to add DT provider: %d\n", err); pr_err 111 drivers/clk/imx/clk-divider-gate.c pr_err("%s: no valid preset rate\n", clk_hw_get_name(hw)); pr_err 107 drivers/clk/imx/clk-imx35.c pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel); pr_err 134 drivers/clk/imx/clk-imx35.c pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel); pr_err 191 drivers/clk/imx/clk-imx6q.c pr_err("ccm: parent clock %d not in ccm\n", index); pr_err 201 drivers/clk/imx/clk-imx6q.c pr_err("ccm: child clock %d not in ccm\n", index); pr_err 212 drivers/clk/imx/clk-imx6q.c pr_err("ccm: invalid ldb_di%d parent clock: %d\n", pr_err 353 drivers/clk/imx/clk-imx6q.c pr_err("ccm: ldb_di%d_sel: couldn't disable pll2_pfd2_396m\n", pr_err 514 drivers/clk/imx/clk-imx6sx.c pr_err("Failed to set pcie bus parent clk.\n"); pr_err 649 drivers/clk/imx/clk-imx8mm.c pr_err("failed to register clks for i.MX8MM\n"); pr_err 144 drivers/clk/imx/clk-pll14xx.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 210 drivers/clk/imx/clk-pll14xx.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 369 drivers/clk/imx/clk-pll14xx.c pr_err("%s: Unknown pll type for pll clk %s\n", pr_err 385 drivers/clk/imx/clk-pll14xx.c pr_err("%s: failed to register pll %s %lu\n", pr_err 216 drivers/clk/imx/clk-pllv2.c pr_err("MX5: pll locking failed\n"); pr_err 162 drivers/clk/imx/clk-scu.c pr_err("%s: failed to get clock rate %d\n", pr_err 252 drivers/clk/imx/clk-scu.c pr_err("%s: failed to get clock parent %d\n", pr_err 41 drivers/clk/imx/clk.c pr_err("i.MX clk %u: register failed with %ld\n", pr_err 51 drivers/clk/imx/clk.c pr_err("i.MX clk %u: register failed with %ld\n", pr_err 611 drivers/clk/ingenic/cgu.c pr_err("%s: no external clock '%s' provided\n", pr_err 626 drivers/clk/ingenic/cgu.c pr_err("%s: no clock type specified for '%s'\n", __func__, pr_err 680 drivers/clk/ingenic/cgu.c pr_err("%s: custom clock may not be combined with type 0x%x\n", pr_err 691 drivers/clk/ingenic/cgu.c pr_err("%s: PLL may not be combined with type 0x%x\n", pr_err 717 drivers/clk/ingenic/cgu.c pr_err("%s: unknown clock type 0x%x\n", __func__, caps); pr_err 723 drivers/clk/ingenic/cgu.c pr_err("%s: failed to register clock '%s'\n", __func__, pr_err 752 drivers/clk/ingenic/cgu.c pr_err("%s: failed to map CGU registers\n", __func__); pr_err 250 drivers/clk/ingenic/jz4725b-cgu.c pr_err("%s: failed to initialise CGU\n", __func__); pr_err 256 drivers/clk/ingenic/jz4725b-cgu.c pr_err("%s: failed to register CGU Clocks\n", __func__); pr_err 247 drivers/clk/ingenic/jz4740-cgu.c pr_err("%s: failed to initialise CGU\n", __func__); pr_err 253 drivers/clk/ingenic/jz4740-cgu.c pr_err("%s: failed to register CGU Clocks\n", __func__); pr_err 436 drivers/clk/ingenic/jz4770-cgu.c pr_err("%s: failed to initialise CGU\n", __func__); pr_err 442 drivers/clk/ingenic/jz4770-cgu.c pr_err("%s: failed to register CGU Clocks\n", __func__); pr_err 716 drivers/clk/ingenic/jz4780-cgu.c pr_err("%s: failed to initialise CGU\n", __func__); pr_err 722 drivers/clk/ingenic/jz4780-cgu.c pr_err("%s: failed to register CGU Clocks\n", __func__); pr_err 207 drivers/clk/keystone/gate.c pr_err("%s: Out of memory\n", __func__); pr_err 214 drivers/clk/keystone/gate.c pr_err("%s: control ioremap failed\n", __func__); pr_err 221 drivers/clk/keystone/gate.c pr_err("%s: domain ioremap failed\n", __func__); pr_err 234 drivers/clk/keystone/gate.c pr_err("%s: Parent clock not found\n", __func__); pr_err 244 drivers/clk/keystone/gate.c pr_err("%s: error registering clk %pOFn\n", __func__, node); pr_err 167 drivers/clk/keystone/pll.c pr_err("%s: Out of memory\n", __func__); pr_err 189 drivers/clk/keystone/pll.c pr_err("%s: ioremap failed\n", __func__); pr_err 218 drivers/clk/keystone/pll.c pr_err("%s: error initializing pll %pOFn\n", __func__, node); pr_err 259 drivers/clk/keystone/pll.c pr_err("%s: ioremap failed\n", __func__); pr_err 265 drivers/clk/keystone/pll.c pr_err("%s: missing parent clock\n", __func__); pr_err 271 drivers/clk/keystone/pll.c pr_err("%s: missing 'shift' property\n", __func__); pr_err 277 drivers/clk/keystone/pll.c pr_err("%s: missing 'bit-mask' property\n", __func__); pr_err 287 drivers/clk/keystone/pll.c pr_err("%s: error registering divider %s\n", __func__, clk_name); pr_err 308 drivers/clk/keystone/pll.c pr_err("%s: ioremap failed\n", __func__); pr_err 314 drivers/clk/keystone/pll.c pr_err("%s: missing parent clocks\n", __func__); pr_err 319 drivers/clk/keystone/pll.c pr_err("%s: missing 'shift' property\n", __func__); pr_err 324 drivers/clk/keystone/pll.c pr_err("%s: missing 'bit-mask' property\n", __func__); pr_err 334 drivers/clk/keystone/pll.c pr_err("%s: error registering mux %s\n", __func__, clk_name); pr_err 670 drivers/clk/keystone/sci-clk.c pr_err("ti-sci-init-clocks failed.\n"); pr_err 94 drivers/clk/mediatek/clk-apmixed.c pr_err("Failed to register clk %s: %ld\n", name, PTR_ERR(clk)); pr_err 89 drivers/clk/mediatek/clk-cpumux.c pr_err("Cannot find regmap for %pOF: %ld\n", node, pr_err 99 drivers/clk/mediatek/clk-cpumux.c pr_err("Failed to register clk %s: %ld\n", pr_err 758 drivers/clk/mediatek/clk-mt2701.c pr_err("%s(): could not register clock provider: %d\n", pr_err 75 drivers/clk/mediatek/clk-mt2712-bdp.c pr_err("%s(): could not register clock provider: %d\n", pr_err 53 drivers/clk/mediatek/clk-mt2712-img.c pr_err("%s(): could not register clock provider: %d\n", pr_err 49 drivers/clk/mediatek/clk-mt2712-jpgdec.c pr_err("%s(): could not register clock provider: %d\n", pr_err 48 drivers/clk/mediatek/clk-mt2712-mfg.c pr_err("%s(): could not register clock provider: %d\n", pr_err 143 drivers/clk/mediatek/clk-mt2712-mm.c pr_err("%s(): could not register clock provider: %d\n", pr_err 67 drivers/clk/mediatek/clk-mt2712-vdec.c pr_err("%s(): could not register clock provider: %d\n", pr_err 50 drivers/clk/mediatek/clk-mt2712-venc.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1273 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1297 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1313 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): ioremap failed\n", __func__); pr_err 1341 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1361 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1383 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1401 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): ioremap failed\n", __func__); pr_err 1413 drivers/clk/mediatek/clk-mt2712.c pr_err("%s(): could not register clock provider: %d\n", pr_err 577 drivers/clk/mediatek/clk-mt6797.c pr_err("%s(): could not register clock provider: %d\n", pr_err 524 drivers/clk/mediatek/clk-mt8135.c pr_err("%s(): ioremap failed\n", __func__); pr_err 539 drivers/clk/mediatek/clk-mt8135.c pr_err("%s(): could not register clock provider: %d\n", pr_err 558 drivers/clk/mediatek/clk-mt8135.c pr_err("%s(): could not register clock provider: %d\n", pr_err 573 drivers/clk/mediatek/clk-mt8135.c pr_err("%s(): ioremap failed\n", __func__); pr_err 586 drivers/clk/mediatek/clk-mt8135.c pr_err("%s(): could not register clock provider: %d\n", pr_err 932 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): ioremap failed\n", __func__); pr_err 945 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 968 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 983 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): ioremap failed\n", __func__); pr_err 996 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1087 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): ioremap failed\n", __func__); pr_err 1106 drivers/clk/mediatek/clk-mt8173.c pr_err("Failed to register clk %s: %ld\n", cku->name, pr_err 1121 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1142 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1159 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1176 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1193 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 1210 drivers/clk/mediatek/clk-mt8173.c pr_err("%s(): could not register clock provider: %d\n", pr_err 61 drivers/clk/mediatek/clk-mt8516-aud.c pr_err("%s(): could not register clock provider: %d\n", pr_err 685 drivers/clk/mediatek/clk-mt8516.c pr_err("%s(): ioremap failed\n", __func__); pr_err 703 drivers/clk/mediatek/clk-mt8516.c pr_err("%s(): could not register clock provider: %d\n", pr_err 716 drivers/clk/mediatek/clk-mt8516.c pr_err("%s(): ioremap failed\n", __func__); pr_err 727 drivers/clk/mediatek/clk-mt8516.c pr_err("%s(): could not register clock provider: %d\n", pr_err 795 drivers/clk/mediatek/clk-mt8516.c pr_err("%s(): ioremap failed\n", __func__); pr_err 805 drivers/clk/mediatek/clk-mt8516.c pr_err("%s(): could not register clock provider: %d\n", pr_err 61 drivers/clk/mediatek/clk-mtk.c pr_err("Failed to register clk %s: %ld\n", pr_err 87 drivers/clk/mediatek/clk-mtk.c pr_err("Failed to register clk %s: %ld\n", pr_err 111 drivers/clk/mediatek/clk-mtk.c pr_err("Cannot find regmap for %pOF: %ld\n", node, pr_err 130 drivers/clk/mediatek/clk-mtk.c pr_err("Failed to register clk %s: %ld\n", pr_err 252 drivers/clk/mediatek/clk-mtk.c pr_err("Failed to register clk %s: %ld\n", pr_err 280 drivers/clk/mediatek/clk-mtk.c pr_err("Failed to register clk %s: %ld\n", pr_err 201 drivers/clk/mediatek/clk-mux.c pr_err("Cannot find regmap for %pOF: %ld\n", node, pr_err 213 drivers/clk/mediatek/clk-mux.c pr_err("Failed to register clk %s: %ld\n", pr_err 353 drivers/clk/mediatek/clk-pll.c pr_err("%s(): ioremap failed\n", __func__); pr_err 363 drivers/clk/mediatek/clk-pll.c pr_err("Failed to register clk %s: %ld\n", pr_err 103 drivers/clk/mediatek/reset.c pr_err("Cannot find regmap for %pOF: %ld\n", np, pr_err 121 drivers/clk/mediatek/reset.c pr_err("could not register reset controller: %d\n", ret); pr_err 3658 drivers/clk/meson/meson8b.c pr_err("%s: Unable to map clk base\n", __func__); pr_err 3678 drivers/clk/meson/meson8b.c pr_err("%s: Failed to register clkc reset controller: %d\n", pr_err 3712 drivers/clk/meson/meson8b.c pr_err("%s: failed to register the CPU clock notifier\n", pr_err 3720 drivers/clk/meson/meson8b.c pr_err("%s: failed to register clock provider\n", __func__); pr_err 420 drivers/clk/microchip/clk-core.c pr_err("%s:%s, no parent found for rate %lu.\n", pr_err 453 drivers/clk/microchip/clk-core.c pr_err("%s: poll failed, clk active\n", clk_hw_get_name(hw)); pr_err 494 drivers/clk/microchip/clk-core.c pr_err("%s: poll timedout, clock is still active\n", __func__); pr_err 693 drivers/clk/microchip/clk-core.c pr_err("%s: failed, clk in-use\n", __func__); pr_err 875 drivers/clk/microchip/clk-core.c pr_err("%s: err, failed to set_parent() to %d, current %d\n", pr_err 205 drivers/clk/microchip/clk-pic32mzda.c pr_err("spll_mux_clk: clk register failed\n"); pr_err 169 drivers/clk/mmp/clk-frac.c pr_err("%s: must pass a clk_factor_mask\n", __func__); pr_err 183 drivers/clk/mmp/clk-mix.c pr_err("%s:%s cannot do frequency change\n", pr_err 87 drivers/clk/mmp/clk-mmp2.c pr_err("error to ioremap MPMU base\n"); pr_err 93 drivers/clk/mmp/clk-mmp2.c pr_err("error to ioremap APMU base\n"); pr_err 99 drivers/clk/mmp/clk-mmp2.c pr_err("error to ioremap APBC base\n"); pr_err 312 drivers/clk/mmp/clk-of-mmp2.c pr_err("failed to map mpmu registers\n"); pr_err 318 drivers/clk/mmp/clk-of-mmp2.c pr_err("failed to map apmu registers\n"); pr_err 324 drivers/clk/mmp/clk-of-mmp2.c pr_err("failed to map apbc registers\n"); pr_err 260 drivers/clk/mmp/clk-of-pxa168.c pr_err("failed to map mpmu registers\n"); pr_err 266 drivers/clk/mmp/clk-of-pxa168.c pr_err("failed to map apmu registers\n"); pr_err 272 drivers/clk/mmp/clk-of-pxa168.c pr_err("failed to map apbc registers\n"); pr_err 218 drivers/clk/mmp/clk-of-pxa1928.c pr_err("failed to map mpmu registers\n"); pr_err 237 drivers/clk/mmp/clk-of-pxa1928.c pr_err("failed to map apmu registers\n"); pr_err 258 drivers/clk/mmp/clk-of-pxa1928.c pr_err("failed to map apbc registers\n"); pr_err 280 drivers/clk/mmp/clk-of-pxa910.c pr_err("failed to map mpmu registers\n"); pr_err 286 drivers/clk/mmp/clk-of-pxa910.c pr_err("failed to map apmu registers\n"); pr_err 292 drivers/clk/mmp/clk-of-pxa910.c pr_err("failed to map apbc registers\n"); pr_err 298 drivers/clk/mmp/clk-of-pxa910.c pr_err("failed to map apbcp registers\n"); pr_err 79 drivers/clk/mmp/clk-pxa168.c pr_err("error to ioremap MPMU base\n"); pr_err 85 drivers/clk/mmp/clk-pxa168.c pr_err("error to ioremap APMU base\n"); pr_err 91 drivers/clk/mmp/clk-pxa168.c pr_err("error to ioremap APBC base\n"); pr_err 78 drivers/clk/mmp/clk-pxa910.c pr_err("error to ioremap MPMU base\n"); pr_err 84 drivers/clk/mmp/clk-pxa910.c pr_err("error to ioremap APMU base\n"); pr_err 90 drivers/clk/mmp/clk-pxa910.c pr_err("error to ioremap APBC extension base\n"); pr_err 96 drivers/clk/mmp/clk-pxa910.c pr_err("error to ioremap APBC base\n"); pr_err 39 drivers/clk/mmp/clk.c pr_err("%s: failed to register clock %s\n", pr_err 61 drivers/clk/mmp/clk.c pr_err("%s: failed to register clock %s\n", pr_err 87 drivers/clk/mmp/clk.c pr_err("%s: failed to register clock %s\n", pr_err 115 drivers/clk/mmp/clk.c pr_err("%s: failed to register clock %s\n", pr_err 143 drivers/clk/mmp/clk.c pr_err("%s: failed to register clock %s\n", pr_err 170 drivers/clk/mmp/clk.c pr_err("%s: failed to register clock %s\n", pr_err 183 drivers/clk/mmp/clk.c pr_err("CLK %d has invalid pointer %p\n", id, clk); pr_err 187 drivers/clk/mmp/clk.c pr_err("CLK %d is invalid\n", id); pr_err 241 drivers/clk/mvebu/ap-cpu-clk.c pr_err("cannot get pll_cr_base regmap\n"); pr_err 72 drivers/clk/mvebu/armada-370.c pr_err("CPU freq select unsupported %d\n", cpu_freq_select); pr_err 78 drivers/clk/mvebu/armada-375.c pr_err("Selected CPU frequency (%d) unsupported\n", pr_err 61 drivers/clk/mvebu/armada-38x.c pr_err("Selected CPU frequency (%d) unsupported\n", pr_err 75 drivers/clk/mvebu/armada-39x.c pr_err("Selected CPU frequency (%d) unsupported\n", pr_err 88 drivers/clk/mvebu/armada-xp.c pr_err("CPU freq select unsupported: %d\n", cpu_freq_select); pr_err 175 drivers/clk/mvebu/clk-cpu.c pr_err("%s: clock-complex base register not set\n", pr_err 53 drivers/clk/mvebu/common.c pr_err("cannot get SSCG register node\n"); pr_err 59 drivers/clk/mvebu/common.c pr_err("cannot map SSCG register\n"); pr_err 243 drivers/clk/mvebu/common.c pr_err("mvebu-clk-gating: cannot instantiate more than one gateable clock device\n"); pr_err 82 drivers/clk/mvebu/mv98dx3236.c pr_err("CPU freq select unsupported %d\n", cpu_freq_select); pr_err 157 drivers/clk/mxs/clk-imx23.c pr_err("i.MX23 clk %d: register failed with %ld\n", pr_err 235 drivers/clk/mxs/clk-imx28.c pr_err("i.MX28 clk %d: register failed with %ld\n", pr_err 132 drivers/clk/nxp/clk-lpc18xx-ccu.c pr_err("%s: invalid clock offset %d\n", __func__, offset); pr_err 174 drivers/clk/nxp/clk-lpc18xx-creg.c pr_err("%s: syscon lookup failed\n", __func__); pr_err 525 drivers/clk/nxp/clk-lpc32xx.c pr_err("%s: PLL clocks are not in valid ranges: %lu/%lu/%lu\n", pr_err 618 drivers/clk/nxp/clk-lpc32xx.c pr_err("%s: %lu: no valid PLL parameters are found\n", pr_err 1498 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to find external 32KHz clock: %ld\n", pr_err 1503 drivers/clk/nxp/clk-lpc32xx.c pr_err("invalid clock rate of external 32KHz oscillator\n"); pr_err 1509 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to find external main oscillator clock: %ld\n", pr_err 1516 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to map system control block registers\n"); pr_err 1522 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to regmap system control block: %ld\n", pr_err 1542 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to register %s clock: %ld\n", pr_err 1572 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to map address range\n"); pr_err 1579 drivers/clk/nxp/clk-lpc32xx.c pr_err("failed to register %s clock: %ld\n", pr_err 479 drivers/clk/pistachio/clk-pll.c pr_err("Unrecognized PLL type %u\n", type); pr_err 31 drivers/clk/pistachio/clk.c pr_err("Failed to map clock provider registers\n"); pr_err 135 drivers/clk/pistachio/clk.c pr_err("Failed to enable clock %s: %d\n", pr_err 547 drivers/clk/qcom/clk-alpha-pll.c pr_err("alpha pll not in a valid vco range\n"); pr_err 725 drivers/clk/qcom/clk-alpha-pll.c pr_err("clock needs to be gated %s\n", pr_err 1160 drivers/clk/qcom/clk-alpha-pll.c pr_err("Call set rate on the PLL with rounded rates!\n"); pr_err 832 drivers/clk/qcom/clk-rcg2.c pr_err("%s: RCG did not turn on\n", name); pr_err 1026 drivers/clk/qcom/clk-rcg2.c pr_err("Failed to update DFS tables for %s\n", pr_err 54 drivers/clk/qcom/clk-regmap-mux-div.c pr_err("%s: RCG did not update its configuration", name); pr_err 68 drivers/clk/qcom/clk-regmap-mux-div.c pr_err("%s: RCG configuration is pending\n", name); pr_err 175 drivers/clk/qcom/clk-regmap-mux-div.c pr_err("%s: Can't find parent with src %d\n", name, src); pr_err 219 drivers/clk/qcom/clk-regmap-mux-div.c pr_err("%s: Can't find parent %d\n", name, src); pr_err 561 drivers/clk/qcom/clk-rpm.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 401 drivers/clk/qcom/clk-rpmh.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 380 drivers/clk/qcom/clk-smd-rpm.c pr_err("RPM clock scaling (sleep set) not enabled!\n"); pr_err 388 drivers/clk/qcom/clk-smd-rpm.c pr_err("RPM clock scaling (active set) not enabled!\n"); pr_err 735 drivers/clk/qcom/clk-smd-rpm.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 190 drivers/clk/qcom/clk-spmi-pmic-div.c pr_err("%s: index value %u is invalid; allowed range [1, %d]\n", pr_err 220 drivers/clk/qcom/common.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 276 drivers/clk/qcom/krait-cc.c pr_err("%s: invalid clock index %d\n", __func__, idx); pr_err 146 drivers/clk/renesas/clk-div6.c pr_err("%s: %s DIV6 clock set to invalid parent %u\n", pr_err 252 drivers/clk/renesas/clk-div6.c pr_err("%s: invalid number of parents for DIV6 clock %s\n", pr_err 303 drivers/clk/renesas/clk-div6.c pr_err("%s: no parent found for %pOFn DIV6 clock\n", pr_err 315 drivers/clk/renesas/clk-div6.c pr_err("%s: failed to map %pOFn DIV6 clock register\n", pr_err 328 drivers/clk/renesas/clk-div6.c pr_err("%s: failed to register %pOFn DIV6 clock (%ld)\n", pr_err 111 drivers/clk/renesas/clk-mstp.c pr_err("%s: failed to enable %p[%d]\n", __func__, pr_err 205 drivers/clk/renesas/clk-mstp.c pr_err("%s: failed to remap SMSTPCR\n", __func__); pr_err 239 drivers/clk/renesas/clk-mstp.c pr_err("%s: invalid clock %pOFn %s index %u\n", pr_err 259 drivers/clk/renesas/clk-mstp.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 198 drivers/clk/renesas/clk-r8a73a4.c pr_err("%s: failed to count clocks\n", __func__); pr_err 229 drivers/clk/renesas/clk-r8a73a4.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 157 drivers/clk/renesas/clk-r8a7740.c pr_err("%s: failed to count clocks\n", __func__); pr_err 188 drivers/clk/renesas/clk-r8a7740.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 99 drivers/clk/renesas/clk-r8a7778.c pr_err("%s: failed to count clocks\n", __func__); pr_err 130 drivers/clk/renesas/clk-r8a7778.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 133 drivers/clk/renesas/clk-r8a7779.c pr_err("%s: failed to count clocks\n", __func__); pr_err 164 drivers/clk/renesas/clk-r8a7779.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 413 drivers/clk/renesas/clk-rcar-gen2.c pr_err("%s: failed to count clocks\n", __func__); pr_err 446 drivers/clk/renesas/clk-rcar-gen2.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 114 drivers/clk/renesas/clk-rz.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 171 drivers/clk/renesas/clk-sh73a0.c pr_err("%s: failed to count clocks\n", __func__); pr_err 207 drivers/clk/renesas/clk-sh73a0.c pr_err("%s: failed to register %pOFn %s clock (%ld)\n", pr_err 131 drivers/clk/rockchip/clk-cpu.c pr_err("%s: Invalid rate : %lu for cpuclk\n", pr_err 192 drivers/clk/rockchip/clk-cpu.c pr_err("%s: Invalid rate : %lu for cpuclk\n", pr_err 258 drivers/clk/rockchip/clk-cpu.c pr_err("%s: needs at least two parent clocks\n", __func__); pr_err 287 drivers/clk/rockchip/clk-cpu.c pr_err("%s: could not lookup alternate parent: (%d)\n", pr_err 295 drivers/clk/rockchip/clk-cpu.c pr_err("%s: could not enable alternate parent\n", pr_err 302 drivers/clk/rockchip/clk-cpu.c pr_err("%s: could not lookup parent clock: (%d) %s\n", pr_err 311 drivers/clk/rockchip/clk-cpu.c pr_err("%s: failed to register clock notifier for %s\n", pr_err 329 drivers/clk/rockchip/clk-cpu.c pr_err("%s: could not register cpuclk %s\n", __func__, name); pr_err 118 drivers/clk/rockchip/clk-ddr.c pr_err("%s: unsupported ddrclk type %d\n", __func__, ddr_flag); pr_err 43 drivers/clk/rockchip/clk-inverter.c pr_err("%s: unsupported phase %d for %s\n", pr_err 97 drivers/clk/rockchip/clk-mmc-phase.c pr_err("%s: invalid clk rate\n", __func__); pr_err 66 drivers/clk/rockchip/clk-muxgrf.c pr_err("%s: regmap not available\n", __func__); pr_err 94 drivers/clk/rockchip/clk-pll.c pr_err("%s: failed to read pll lock status: %d\n", pr_err 104 drivers/clk/rockchip/clk-pll.c pr_err("%s: timeout waiting for pll to lock\n", __func__); pr_err 249 drivers/clk/rockchip/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 482 drivers/clk/rockchip/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 599 drivers/clk/rockchip/clk-pll.c pr_err("%s: timeout waiting for pll to lock\n", __func__); pr_err 728 drivers/clk/rockchip/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 848 drivers/clk/rockchip/clk-pll.c pr_err("%s: needs two parent clocks\n", __func__); pr_err 958 drivers/clk/rockchip/clk-pll.c pr_err("%s: failed to register pll clock %s : %ld\n", pr_err 966 drivers/clk/rockchip/clk-px30.c pr_err("%s: could not map cru region\n", __func__); pr_err 972 drivers/clk/rockchip/clk-px30.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 1004 drivers/clk/rockchip/clk-px30.c pr_err("%s: could not map cru pmu region\n", __func__); pr_err 1010 drivers/clk/rockchip/clk-px30.c pr_err("%s: rockchip pmu clk init failed\n", __func__); pr_err 442 drivers/clk/rockchip/clk-rk3036.c pr_err("%s: could not map cru region\n", __func__); pr_err 455 drivers/clk/rockchip/clk-rk3036.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 583 drivers/clk/rockchip/clk-rk3128.c pr_err("%s: could not map cru region\n", __func__); pr_err 589 drivers/clk/rockchip/clk-rk3128.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 763 drivers/clk/rockchip/clk-rk3188.c pr_err("%s: could not map cru region\n", __func__); pr_err 769 drivers/clk/rockchip/clk-rk3188.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 689 drivers/clk/rockchip/clk-rk3228.c pr_err("%s: could not map cru region\n", __func__); pr_err 695 drivers/clk/rockchip/clk-rk3228.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 923 drivers/clk/rockchip/clk-rk3288.c pr_err("%s: could not map cru region\n", __func__); pr_err 929 drivers/clk/rockchip/clk-rk3288.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 923 drivers/clk/rockchip/clk-rk3308.c pr_err("%s: could not map cru region\n", __func__); pr_err 929 drivers/clk/rockchip/clk-rk3308.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 887 drivers/clk/rockchip/clk-rk3328.c pr_err("%s: could not map cru region\n", __func__); pr_err 893 drivers/clk/rockchip/clk-rk3328.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 871 drivers/clk/rockchip/clk-rk3368.c pr_err("%s: could not map cru region\n", __func__); pr_err 877 drivers/clk/rockchip/clk-rk3368.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 1531 drivers/clk/rockchip/clk-rk3399.c pr_err("%s: could not map cru region\n", __func__); pr_err 1537 drivers/clk/rockchip/clk-rk3399.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 1577 drivers/clk/rockchip/clk-rk3399.c pr_err("%s: could not map cru pmu region\n", __func__); pr_err 1583 drivers/clk/rockchip/clk-rk3399.c pr_err("%s: rockchip pmu clk init failed\n", __func__); pr_err 791 drivers/clk/rockchip/clk-rv1108.c pr_err("%s: could not map cru region\n", __func__); pr_err 797 drivers/clk/rockchip/clk-rv1108.c pr_err("%s: rockchip clk init failed\n", __func__); pr_err 227 drivers/clk/rockchip/clk.c pr_err("%s: fractional child clock for %s can only be a mux\n", pr_err 306 drivers/clk/rockchip/clk.c pr_err("%s: failed to register clock notifier for %s\n", pr_err 403 drivers/clk/rockchip/clk.c pr_err("%s: could not register clk provider\n", __func__); pr_err 428 drivers/clk/rockchip/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 555 drivers/clk/rockchip/clk.c pr_err("%s: unknown clock type %d\n", pr_err 561 drivers/clk/rockchip/clk.c pr_err("%s: failed to register clock %s: %ld\n", pr_err 584 drivers/clk/rockchip/clk.c pr_err("%s: failed to register clock %s: %ld\n", pr_err 636 drivers/clk/rockchip/clk.c pr_err("%s: cannot register restart handler, %d\n", pr_err 105 drivers/clk/rockchip/softrst.c pr_err("%s: could not register reset controller, %d\n", pr_err 81 drivers/clk/samsung/clk-cpu.c pr_err("%s: timeout in divider stablization\n", __func__); pr_err 101 drivers/clk/samsung/clk-cpu.c pr_err("%s: re-parenting mux timed-out\n", __func__); pr_err 435 drivers/clk/samsung/clk-cpu.c pr_err("%s: could not lookup alternate parent %s\n", pr_err 443 drivers/clk/samsung/clk-cpu.c pr_err("%s: could not lookup parent clock %s\n", pr_err 451 drivers/clk/samsung/clk-cpu.c pr_err("%s: failed to register clock notifier for %s\n", pr_err 464 drivers/clk/samsung/clk-cpu.c pr_err("%s: could not register cpuclk %s\n", __func__, name); pr_err 129 drivers/clk/samsung/clk-exynos-clkout.c pr_err("%s: failed to register clkout clock\n", __func__); pr_err 1047 drivers/clk/samsung/clk-exynos4.c pr_err("%s: failed to lookup parent clock %s, assuming " pr_err 214 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 326 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 445 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 497 drivers/clk/samsung/clk-pll.c pr_err("%s: could not lock PLL %s\n", pr_err 596 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 656 drivers/clk/samsung/clk-pll.c pr_err("%s: could not lock PLL %s\n", pr_err 814 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 1010 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 1110 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 1204 drivers/clk/samsung/clk-pll.c pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, pr_err 1259 drivers/clk/samsung/clk-pll.c pr_err("%s: could not allocate pll clk %s\n", pr_err 1391 drivers/clk/samsung/clk-pll.c pr_err("%s: failed to register pll clock %s : %d\n", pr_err 106 drivers/clk/samsung/clk.c pr_err("%s: clock id missing for index %d\n", __func__, pr_err 113 drivers/clk/samsung/clk.c pr_err("%s: failed to find clock %d\n", __func__, pr_err 121 drivers/clk/samsung/clk.c pr_err("%s: failed to register lookup %s\n", pr_err 138 drivers/clk/samsung/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 151 drivers/clk/samsung/clk.c pr_err("%s: failed to register clock lookup for %s", pr_err 167 drivers/clk/samsung/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 190 drivers/clk/samsung/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 220 drivers/clk/samsung/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 242 drivers/clk/samsung/clk.c pr_err("%s: failed to register clock %s\n", __func__, pr_err 279 drivers/clk/samsung/clk.c pr_err("%s: could not find clock %s\n", __func__, clk_name); pr_err 1250 drivers/clk/sirf/clk-atlas7.c pr_err("unit NoC Clock disconnect Error:timeout\n"); pr_err 83 drivers/clk/socfpga/clk-gate-a10.c pr_err("%s: cannot set clk_phase because sys_mgr_base_addr is not available!\n", pr_err 147 drivers/clk/socfpga/clk-gate-a10.c pr_err("%s: failed to find altr,sys-mgr regmap!\n", pr_err 122 drivers/clk/socfpga/clk-gate.c pr_err("%s: failed to find altr,sys-mgr regmap!\n", __func__); pr_err 114 drivers/clk/socfpga/clk-periph-a10.c pr_err("Could not register clock provider for node:%s\n", pr_err 184 drivers/clk/socfpga/clk-s10.c pr_err("%s: failed to register clock %s\n", pr_err 210 drivers/clk/socfpga/clk-s10.c pr_err("%s: failed to register clock %s\n", pr_err 239 drivers/clk/socfpga/clk-s10.c pr_err("%s: failed to register clock %s\n", pr_err 262 drivers/clk/socfpga/clk-s10.c pr_err("%s: failed to register clock %s\n", pr_err 285 drivers/clk/socfpga/clk-s10.c pr_err("%s: failed to map clock registers\n", __func__); pr_err 147 drivers/clk/spear/clk-aux-synth.c pr_err("Invalid arguments passed"); pr_err 194 drivers/clk/spear/clk-aux-synth.c pr_err("clk register failed\n"); pr_err 134 drivers/clk/spear/clk-frac-synth.c pr_err("Invalid arguments passed\n"); pr_err 159 drivers/clk/spear/clk-frac-synth.c pr_err("clk register failed\n"); pr_err 123 drivers/clk/spear/clk-gpt-synth.c pr_err("Invalid arguments passed\n"); pr_err 148 drivers/clk/spear/clk-gpt-synth.c pr_err("clk register failed\n"); pr_err 93 drivers/clk/spear/clk-vco-pll.c pr_err("%s: prate is must for pll clk\n", __func__); pr_err 290 drivers/clk/spear/clk-vco-pll.c pr_err("Invalid arguments passed"); pr_err 356 drivers/clk/spear/clk-vco-pll.c pr_err("Failed to register vco pll clock\n"); pr_err 50 drivers/clk/sprd/common.c pr_err("%s: failed to get syscon regmap\n", __func__); pr_err 62 drivers/clk/sprd/common.c pr_err("failed to init regmap\n"); pr_err 2030 drivers/clk/sprd/sc9860-clk.c pr_err("%s: of_match_node() failed", __func__); pr_err 352 drivers/clk/st/clk-flexgen.c pr_err("%s: Failed to get number of output clocks (%d)", pr_err 279 drivers/clk/st/clkgen-fsyn.c pr_err("%s:%s error calculating rate\n", pr_err 746 drivers/clk/st/clkgen-fsyn.c pr_err("%s:%s error calculating rate\n", pr_err 62 drivers/clk/st/clkgen-mux.c pr_err("%s: Failed to get base address\n", __func__); pr_err 68 drivers/clk/st/clkgen-mux.c pr_err("%s: Failed to get parents (%ld)\n", pr_err 1436 drivers/clk/sunxi-ng/ccu-sun4i-a10.c pr_err("%s: Could not map the clock registers\n", pr_err 195 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 995 drivers/clk/sunxi-ng/ccu-sun5i.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 1236 drivers/clk/sunxi-ng/ccu-sun6i-a31.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 734 drivers/clk/sunxi-ng/ccu-sun8i-a23.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 794 drivers/clk/sunxi-ng/ccu-sun8i-a33.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 1147 drivers/clk/sunxi-ng/ccu-sun8i-h3.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 264 drivers/clk/sunxi-ng/ccu-sun8i-r.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 805 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 532 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c pr_err("%pOF: Could not map the clock registers\n", node); pr_err 108 drivers/clk/sunxi-ng/ccu_common.c pr_err("Couldn't register clock %d - %s\n", i, name); pr_err 69 drivers/clk/sunxi/clk-a10-pll2.c pr_err("Couldn't register the prediv clock\n"); pr_err 102 drivers/clk/sunxi/clk-a10-pll2.c pr_err("Couldn't register the base multiplier clock\n"); pr_err 135 drivers/clk/sunxi/clk-mod0.c pr_err("Could not get registers for mod0-clk: %pOFn\n", pr_err 153 drivers/clk/sunxi/clk-mod0.c pr_err("Could not get registers for a13-mbus-clk\n"); pr_err 301 drivers/clk/sunxi/clk-mod0.c pr_err("Couldn't map the %pOFn clock registers\n", node); pr_err 119 drivers/clk/sunxi/clk-sun4i-display.c pr_err("%s: Could not map the clock registers\n", clk_name); pr_err 125 drivers/clk/sunxi/clk-sun4i-display.c pr_err("%s: Could not retrieve the parents\n", clk_name); pr_err 165 drivers/clk/sunxi/clk-sun4i-display.c pr_err("%s: Couldn't register the clock\n", clk_name); pr_err 171 drivers/clk/sunxi/clk-sun4i-display.c pr_err("%s: Couldn't register DT provider\n", clk_name); pr_err 197 drivers/clk/sunxi/clk-sun4i-display.c pr_err("%s: Couldn't register the reset controller\n", pr_err 36 drivers/clk/sunxi/clk-sun4i-pll3.c pr_err("%s: Could not map the clock registers\n", clk_name); pr_err 64 drivers/clk/sunxi/clk-sun4i-pll3.c pr_err("%s: Couldn't register the clock\n", clk_name); pr_err 70 drivers/clk/sunxi/clk-sun4i-pll3.c pr_err("%s: Couldn't register DT provider\n", pr_err 239 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c pr_err("%s: Could not map the clock registers\n", clk_name); pr_err 245 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c pr_err("%s Could not retrieve the parents\n", clk_name); pr_err 265 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c pr_err("%s: Couldn't register the clock\n", clk_name); pr_err 271 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c pr_err("%s: Couldn't register our clock provider\n", clk_name); pr_err 68 drivers/clk/sunxi/clk-sun8i-apb0.c pr_err("Could not get registers for a23-apb0-clk\n"); pr_err 43 drivers/clk/sunxi/clk-sun8i-mbus.c pr_err("Could not get registers for sun8i-mbus-clk\n"); pr_err 82 drivers/clk/sunxi/clk-sun9i-core.c pr_err("Could not get registers for a80-pll4-clk: %pOFn\n", pr_err 136 drivers/clk/sunxi/clk-sun9i-core.c pr_err("Could not get registers for a80-gt-clk: %pOFn\n", pr_err 191 drivers/clk/sunxi/clk-sun9i-core.c pr_err("Could not get registers for a80-ahb-clk: %pOFn\n", pr_err 217 drivers/clk/sunxi/clk-sun9i-core.c pr_err("Could not get registers for a80-apb0-clk: %pOFn\n", pr_err 274 drivers/clk/sunxi/clk-sun9i-core.c pr_err("Could not get registers for a80-apb1-clk: %pOFn\n", pr_err 563 drivers/clk/sunxi/clk-sunxi.c pr_err("Could not get registers for factors-clk: %pOFn\n", pr_err 662 drivers/clk/sunxi/clk-sunxi.c pr_err("Could not map registers for mux-clk: %pOF\n", node); pr_err 668 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: could not read clock-output-names from \"%pOF\"\n", pr_err 679 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: failed to register mux clock %s: %ld\n", __func__, pr_err 685 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: failed to add clock provider for %s\n", pr_err 785 drivers/clk/sunxi/clk-sunxi.c pr_err("Could not map registers for mux-clk: %pOF\n", node); pr_err 792 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: could not read clock-output-names from \"%pOF\"\n", pr_err 802 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: failed to register divider clock %s: %ld\n", pr_err 808 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: failed to add clock provider for %s\n", pr_err 1001 drivers/clk/sunxi/clk-sunxi.c pr_err("Could not map registers for divs-clk: %pOF\n", node); pr_err 1093 drivers/clk/sunxi/clk-sunxi.c pr_err("%s: failed to add clock provider for %s\n", pr_err 151 drivers/clk/sunxi/clk-usb.c pr_err("Could not get clock for reset controls\n"); pr_err 55 drivers/clk/tegra/clk-audio-sync.c pr_err("%s: could not allocate sync source clk\n", __func__); pr_err 129 drivers/clk/tegra/clk-divider.c pr_err("%s: could not allocate fractional divider clk\n", pr_err 184 drivers/clk/tegra/clk-emc.c pr_err("%s: could not get external memory controller\n", pr_err 194 drivers/clk/tegra/clk-emc.c pr_err("%s: cannot find EMC driver\n", __func__); pr_err 229 drivers/clk/tegra/clk-emc.c pr_err("cannot change parent %s rate to %ld: %d\n", pr_err 238 drivers/clk/tegra/clk-emc.c pr_err("cannot enable parent clock: %d\n", err); pr_err 341 drivers/clk/tegra/clk-emc.c pr_err("cannot switch to rate %ld without emc table\n", rate); pr_err 357 drivers/clk/tegra/clk-emc.c pr_err("cannot find backup timing\n"); pr_err 366 drivers/clk/tegra/clk-emc.c pr_err("cannot set backup timing: %d\n", err); pr_err 385 drivers/clk/tegra/clk-emc.c pr_err("timing %pOF: failed to read rate\n", node); pr_err 393 drivers/clk/tegra/clk-emc.c pr_err("timing %pOF: failed to read parent rate\n", node); pr_err 401 drivers/clk/tegra/clk-emc.c pr_err("timing %pOF: failed to get parent clock\n", node); pr_err 414 drivers/clk/tegra/clk-emc.c pr_err("timing %pOF: %s is not a valid parent\n", pr_err 134 drivers/clk/tegra/clk-periph-gate.c pr_err("%s: could not allocate periph gate clk\n", __func__); pr_err 319 drivers/clk/tegra/clk-pll.c pr_err("%s: Timed out waiting for pll %s lock\n", __func__, pr_err 571 drivers/clk/tegra/clk-pll.c pr_err("%s Unexpected reference rate %lu\n", pr_err 788 drivers/clk/tegra/clk-pll.c pr_err("%s: Can not change %s fixed rate %lu to %lu\n", pr_err 798 drivers/clk/tegra/clk-pll.c pr_err("%s: Failed to set %s rate %lu\n", __func__, pr_err 860 drivers/clk/tegra/clk-pll.c pr_err("Clock %s has unknown fixed frequency\n", pr_err 923 drivers/clk/tegra/clk-pll.c pr_err("%s: timeout waiting for PLLE\n", __func__); pr_err 1083 drivers/clk/tegra/clk-pll.c pr_err("%s: failed to get OSC clock\n", __func__); pr_err 1106 drivers/clk/tegra/clk-pll.c pr_err("%s: unexpected input rate %lu Hz\n", __func__, pr_err 1244 drivers/clk/tegra/clk-pll.c pr_err("%s: Unexpected reference rate %lu\n", pr_err 1426 drivers/clk/tegra/clk-pll.c pr_err("%s: Unexpected reference rate %lu\n", pr_err 1708 drivers/clk/tegra/clk-pll.c pr_err("%s: failed to get OSC clock\n", __func__); pr_err 1734 drivers/clk/tegra/clk-pll.c pr_err("%s: unexpected input rate %lu Hz\n", __func__, pr_err 173 drivers/clk/tegra/clk-tegra-audio.c pr_err("No audio data passed to tegra_audio_clk_init\n"); pr_err 1328 drivers/clk/tegra/clk-tegra114.c pr_err("ioremap tegra114 CAR failed\n"); pr_err 1334 drivers/clk/tegra/clk-tegra114.c pr_err("Failed to find pmc node\n"); pr_err 1341 drivers/clk/tegra/clk-tegra114.c pr_err("Can't map pmc registers\n"); pr_err 1420 drivers/clk/tegra/clk-tegra124.c pr_err("ioremap tegra124/tegra132 CAR failed\n"); pr_err 1426 drivers/clk/tegra/clk-tegra124.c pr_err("Failed to find pmc node\n"); pr_err 1433 drivers/clk/tegra/clk-tegra124.c pr_err("Can't map pmc registers\n"); pr_err 597 drivers/clk/tegra/clk-tegra20.c pr_err("Unexpected clock autodetect value %d", pr_err 619 drivers/clk/tegra/clk-tegra20.c pr_err("Invalid pll ref divider %d\n", pll_ref_div); pr_err 809 drivers/clk/tegra/clk-tegra20.c pr_err("%s: un-divided PllM_out0 used as clock source\n", pr_err 1143 drivers/clk/tegra/clk-tegra20.c pr_err("Can't map CAR registers\n"); pr_err 1149 drivers/clk/tegra/clk-tegra20.c pr_err("Failed to find pmc node\n"); pr_err 1155 drivers/clk/tegra/clk-tegra20.c pr_err("Can't map pmc registers\n"); pr_err 1060 drivers/clk/tegra/clk-tegra210.c pr_err("%s: Unexpected reference rate %lu\n", pr_err 2713 drivers/clk/tegra/clk-tegra210.c pr_err("trying to assert IDDQ while UTMIPLL is locked\n"); pr_err 2743 drivers/clk/tegra/clk-tegra210.c pr_err("%s: Unexpected oscillator freq %lu\n", __func__, pr_err 2835 drivers/clk/tegra/clk-tegra210.c pr_err("Unknown PLL_U reference frequency %lu\n", pll_ref_freq); pr_err 2859 drivers/clk/tegra/clk-tegra210.c pr_err("Timed out waiting for PLL_U to lock\n"); pr_err 3514 drivers/clk/tegra/clk-tegra210.c pr_err("ioremap tegra210 CAR failed\n"); pr_err 3520 drivers/clk/tegra/clk-tegra210.c pr_err("Failed to find pmc node\n"); pr_err 3527 drivers/clk/tegra/clk-tegra210.c pr_err("Can't map pmc registers\n"); pr_err 3534 drivers/clk/tegra/clk-tegra210.c pr_err("ioremap tegra210 APE failed\n"); pr_err 3540 drivers/clk/tegra/clk-tegra210.c pr_err("ioremap tegra210 DISPA failed\n"); pr_err 3546 drivers/clk/tegra/clk-tegra210.c pr_err("ioremap tegra210 VIC failed\n"); pr_err 1311 drivers/clk/tegra/clk-tegra30.c pr_err("ioremap tegra30 CAR failed\n"); pr_err 1317 drivers/clk/tegra/clk-tegra30.c pr_err("Failed to find pmc node\n"); pr_err 1323 drivers/clk/tegra/clk-tegra30.c pr_err("Can't map pmc registers\n"); pr_err 246 drivers/clk/tegra/clk.c pr_err("%s: invalid entry %ld in clks array for id %d\n", pr_err 256 drivers/clk/tegra/clk.c pr_err("%s: Failed to set parent %s of %s\n", pr_err 265 drivers/clk/tegra/clk.c pr_err("%s: Failed to set rate %lu of %s\n", pr_err 273 drivers/clk/tegra/clk.c pr_err("%s: Failed to enable %s\n", __func__, pr_err 299 drivers/clk/tegra/clk.c pr_err pr_err 206 drivers/clk/ti/apll.c pr_err("dra7 apll %pOFn must have parent(s)\n", node); pr_err 370 drivers/clk/ti/apll.c pr_err("%pOFn must have one parent\n", node); pr_err 378 drivers/clk/ti/apll.c pr_err("%pOFn missing clock-frequency\n", node); pr_err 384 drivers/clk/ti/apll.c pr_err("%pOFn missing bit-shift\n", node); pr_err 393 drivers/clk/ti/apll.c pr_err("%pOFn missing idlest-shift\n", node); pr_err 794 drivers/clk/ti/clk-44xx.c pr_err("%s: failed to configure USB DPLL!\n", __func__); pr_err 809 drivers/clk/ti/clk-44xx.c pr_err("%s: failed to configure ABE DPLL!\n", __func__); pr_err 588 drivers/clk/ti/clk-54xx.c pr_err("%s: failed to configure ABE DPLL!\n", __func__); pr_err 594 drivers/clk/ti/clk-54xx.c pr_err("%s: failed to configure ABE m2x2 DPLL!\n", __func__); pr_err 599 drivers/clk/ti/clk-54xx.c pr_err("%s: failed to configure USB DPLL!\n", __func__); pr_err 604 drivers/clk/ti/clk-54xx.c pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); pr_err 902 drivers/clk/ti/clk-7xx.c pr_err("%s: failed to configure GMAC DPLL!\n", __func__); pr_err 907 drivers/clk/ti/clk-7xx.c pr_err("%s: failed to configure USB DPLL!\n", __func__); pr_err 912 drivers/clk/ti/clk-7xx.c pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); pr_err 917 drivers/clk/ti/clk-7xx.c pr_err("%s: failed to set dss_deshdcp_clk\n", __func__); pr_err 64 drivers/clk/ti/clk-814x.c pr_err("Could not find node for plls\n"); pr_err 180 drivers/clk/ti/clk-dra7-atl.c pr_err("%s: could not allocate dra7_atl_desc\n", __func__); pr_err 192 drivers/clk/ti/clk-dra7-atl.c pr_err("%s: atl clock %pOFn must have 1 parent\n", __func__, pr_err 253 drivers/clk/ti/clk-dra7-atl.c pr_err("%s: failed to lookup atl clock %d\n", __func__, pr_err 260 drivers/clk/ti/clk-dra7-atl.c pr_err("%s: failed to get atl clock %d from provider\n", pr_err 110 drivers/clk/ti/clk.c pr_err("Attempt to register ll_ops multiple times.\n"); pr_err 275 drivers/clk/ti/clk.c pr_err("clk-provider not found for %pOFn!\n", node); pr_err 282 drivers/clk/ti/clk.c pr_err("%pOFn must have reg[%d]!\n", node, index); pr_err 329 drivers/clk/ti/clk.c pr_err("%pOFn missing 'clocks' child node.\n", parent); pr_err 168 drivers/clk/ti/clkctrl.c pr_err("%s: failed to enable\n", clk_hw_get_name(hw)); pr_err 198 drivers/clk/ti/clkctrl.c pr_err("%s: failed to disable\n", clk_hw_get_name(hw)); pr_err 385 drivers/clk/ti/clkctrl.c pr_err("%s: Data parsing for %pOF:%04x:%d failed\n", __func__, pr_err 426 drivers/clk/ti/clkctrl.c pr_err("%s: bad subclk type: %d\n", __func__, pr_err 527 drivers/clk/ti/clkctrl.c pr_err("%pOF not found from clkctrl data.\n", node); pr_err 77 drivers/clk/ti/clkt_dflt.c pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", pr_err 50 drivers/clk/ti/clockdomain.c pr_err("%s: %s: no clkdm set ?!\n", __func__, pr_err 56 drivers/clk/ti/clockdomain.c pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", pr_err 84 drivers/clk/ti/clockdomain.c pr_err("%s: %s: no clkdm set ?!\n", __func__, pr_err 90 drivers/clk/ti/clockdomain.c pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", pr_err 141 drivers/clk/ti/clockdomain.c pr_err("%s: Failed get %pOF' clock nr %d (%ld)\n", pr_err 147 drivers/clk/ti/composite.c pr_err("duplicate component types for %pOFn (%s)!\n", pr_err 171 drivers/clk/ti/composite.c pr_err("%s: no parents found for %pOFn!\n", __func__, node); pr_err 215 drivers/clk/ti/composite.c pr_err("composite clk %pOFn must have component(s)\n", node); pr_err 251 drivers/clk/ti/composite.c pr_err("component-clock %pOFn must have parent(s)\n", node); pr_err 455 drivers/clk/ti/divider.c pr_err("no valid dividers for %pOFn table\n", node); pr_err 493 drivers/clk/ti/divider.c pr_err("no max-div for %pOFn!\n", node); pr_err 235 drivers/clk/ti/dpll.c pr_err("%pOFn must have parent\n", node); pr_err 310 drivers/clk/ti/dpll.c pr_err("%pOFn must have parent(s)\n", node); pr_err 80 drivers/clk/ti/dpll3xxx.c pr_err("clock: %s failed transition to '%s'\n", pr_err 932 drivers/clk/ti/dpll3xxx.c pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); pr_err 955 drivers/clk/ti/dpll3xxx.c pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); pr_err 133 drivers/clk/ti/fapll.c pr_err("%s failed to lock\n", fd->name); pr_err 559 drivers/clk/ti/fapll.c pr_err("%pOFn must have two parents\n", node); pr_err 568 drivers/clk/ti/fapll.c pr_err("%pOFn could not get clk_ref\n", node); pr_err 574 drivers/clk/ti/fapll.c pr_err("%pOFn could not get clk_bypass\n", node); pr_err 580 drivers/clk/ti/fapll.c pr_err("%pOFn could not get IO base\n", node); pr_err 45 drivers/clk/ti/fixed-factor.c pr_err("%pOFn must have a clock-div property\n", node); pr_err 50 drivers/clk/ti/fixed-factor.c pr_err("%pOFn must have a clock-mult property\n", node); pr_err 155 drivers/clk/ti/gate.c pr_err("%pOFn must have 1 parent\n", node); pr_err 85 drivers/clk/ti/interface.c pr_err("%pOFn must have a parent\n", node); pr_err 187 drivers/clk/ti/mux.c pr_err("mux-clock %pOFn must have parents\n", node); pr_err 279 drivers/clk/ti/mux.c pr_err("%pOFn must have parents\n", node); pr_err 105 drivers/clk/ux500/clk-prcc.c pr_err("clk_prcc: %s invalid arguments passed\n", __func__); pr_err 137 drivers/clk/ux500/clk-prcc.c pr_err("clk_prcc: %s failed to register clk\n", __func__); pr_err 44 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, pr_err 106 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s fail req APE OPP for %s.\n", pr_err 130 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, pr_err 152 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n", pr_err 175 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, pr_err 256 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s invalid arguments passed\n", __func__); pr_err 287 drivers/clk/ux500/clk-prcmu.c pr_err("clk_prcmu: %s failed to register clk\n", __func__); pr_err 42 drivers/clk/ux500/u8500_of_clk.c pr_err("%s: invalid PRCC base %d\n", __func__, base); pr_err 73 drivers/clk/ux500/u8500_of_clk.c pr_err("failed to get CLKRST %d base address\n", pr_err 175 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to set bit 8 of VDW\n"); pr_err 177 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to use VOD != 1\n"); pr_err 179 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to use RDW != 22\n"); pr_err 185 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to set bit 8 of VDW\n"); pr_err 187 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to use VOD != 1\n"); pr_err 189 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to use RDW != 22\n"); pr_err 195 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to set bit 8 of VDW\n"); pr_err 197 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to use RDW != 22\n"); pr_err 203 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to set bit 8 of VDW\n"); pr_err 205 drivers/clk/versatile/clk-icst.c pr_err("ICST error: tried to use RDW != 22\n"); pr_err 241 drivers/clk/versatile/clk-icst.c pr_err("ICST: could not get VCO setting\n"); pr_err 314 drivers/clk/versatile/clk-icst.c pr_err("ICST: cannot set PCI frequency %lu\n", pr_err 405 drivers/clk/versatile/clk-icst.c pr_err("could not initialize ICST regmap\n"); pr_err 505 drivers/clk/versatile/clk-icst.c pr_err("no parent node for syscon ICST clock\n"); pr_err 510 drivers/clk/versatile/clk-icst.c pr_err("no regmap for syscon ICST clock parent\n"); pr_err 515 drivers/clk/versatile/clk-icst.c pr_err("no VCO register offset for ICST clock\n"); pr_err 519 drivers/clk/versatile/clk-icst.c pr_err("no lock register offset for ICST clock\n"); pr_err 545 drivers/clk/versatile/clk-icst.c pr_err("unknown ICST clock %s\n", name); pr_err 554 drivers/clk/versatile/clk-icst.c pr_err("error setting up syscon ICST clock %s\n", name); pr_err 69 drivers/clk/versatile/clk-versatile.c pr_err("no parent on core module clock\n"); pr_err 75 drivers/clk/versatile/clk-versatile.c pr_err("could not remap core module base\n"); pr_err 580 drivers/clk/zte/clk-zx296702.c pr_err("zx296702 clk %d: register failed with %ld\n", pr_err 664 drivers/clk/zte/clk-zx296702.c pr_err("zx296702 clk %d: register failed with %ld\n", pr_err 730 drivers/clk/zte/clk-zx296702.c pr_err("zx296702 clk %d: register failed with %ld\n", pr_err 571 drivers/clk/zte/clk-zx296718.c pr_err("%s: Unable to map clk base\n", __func__); pr_err 633 drivers/clk/zte/clk-zx296718.c pr_err("failed to register top clk provider: %d\n", ret); pr_err 757 drivers/clk/zte/clk-zx296718.c pr_err("%s: Unable to map clk base\n", __func__); pr_err 800 drivers/clk/zte/clk-zx296718.c pr_err("failed to register lsp0 clk provider: %d\n", ret); pr_err 863 drivers/clk/zte/clk-zx296718.c pr_err("%s: Unable to map clk base\n", __func__); pr_err 906 drivers/clk/zte/clk-zx296718.c pr_err("failed to register lsp1 clk provider: %d\n", ret); pr_err 978 drivers/clk/zte/clk-zx296718.c pr_err("%s: Unable to map audio clk base\n", __func__); pr_err 1033 drivers/clk/zte/clk-zx296718.c pr_err("failed to register audio clk provider: %d\n", ret); pr_err 236 drivers/clk/zynq/clkc.c pr_err("%s: clock output name not in DT\n", __func__); pr_err 568 drivers/clk/zynq/clkc.c pr_err("Zynq clk %d: register failed with %ld\n", pr_err 589 drivers/clk/zynq/clkc.c pr_err("%s: clkc node not found\n", __func__); pr_err 594 drivers/clk/zynq/clkc.c pr_err("%pOFn: failed to get resource\n", np); pr_err 603 drivers/clk/zynq/clkc.c pr_err("%pOFn: Unable to get I/O memory\n", np); pr_err 641 drivers/clk/zynqmp/clkc.c pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n", pr_err 332 drivers/clk/zynqmp/pll.c pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret); pr_err 39 drivers/clocksource/arc_timer.c pr_err("timer missing clk\n"); pr_err 45 drivers/clocksource/arc_timer.c pr_err("Couldn't enable parent clk\n"); pr_err 332 drivers/clocksource/arc_timer.c pr_err("clockevent: missing irq\n"); pr_err 338 drivers/clocksource/arc_timer.c pr_err("clockevent: missing clk\n"); pr_err 346 drivers/clocksource/arc_timer.c pr_err("clockevent: unable to request irq\n"); pr_err 355 drivers/clocksource/arc_timer.c pr_err("Failed to setup hotplug state\n"); pr_err 1103 drivers/clocksource/arm_arch_timer.c pr_err("can't register interrupt %d (%d)\n", ppi, err); pr_err 1155 drivers/clocksource/arm_arch_timer.c pr_err("Failed to request mem timer irq\n"); pr_err 1281 drivers/clocksource/arm_arch_timer.c pr_err("No interrupt available, giving up\n"); pr_err 1309 drivers/clocksource/arm_arch_timer.c pr_err("Unable to map frame @ %pa\n", &frame->cntbase); pr_err 1330 drivers/clocksource/arm_arch_timer.c pr_err("Can't map CNTCTLBase @ %pa\n", pr_err 1383 drivers/clocksource/arm_arch_timer.c pr_err("Frame missing %s irq.\n", pr_err 1394 drivers/clocksource/arm_arch_timer.c pr_err("Can't map frame's registers\n"); pr_err 1433 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "Missing frame-number.\n"); pr_err 1438 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "Wrong frame-number, only 0-%u are permitted.\n", pr_err 1446 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "Duplicated frame-number.\n"); pr_err 1468 drivers/clocksource/arm_arch_timer.c pr_err("Unable to find a suitable frame in timer @ %pa\n", pr_err 1505 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "CNTFRQ mismatch: frame @ %pa: (0x%08lx), CPU: (0x%08lx)\n", pr_err 1543 drivers/clocksource/arm_arch_timer.c pr_err("Disabling MMIO timers due to CNTFRQ mismatch\n"); pr_err 1552 drivers/clocksource/arm_arch_timer.c pr_err("Unable to find a suitable frame in timer @ %pa\n", pr_err 1577 drivers/clocksource/arm_arch_timer.c pr_err("Failed to init GTDT table.\n"); pr_err 1598 drivers/clocksource/arm_arch_timer.c pr_err(FW_BUG "frequency not available.\n"); pr_err 1604 drivers/clocksource/arm_arch_timer.c pr_err("No interrupt available, giving up\n"); pr_err 1620 drivers/clocksource/arm_arch_timer.c pr_err("Failed to initialize memory-mapped timer.\n"); pr_err 63 drivers/clocksource/armv7m_systick.c pr_err("failed to init clocksource (%d)\n", ret); pr_err 192 drivers/clocksource/asm9260_timer.c pr_err("%pOFn: unable to map resource\n", np); pr_err 198 drivers/clocksource/asm9260_timer.c pr_err("Failed to get clk!\n"); pr_err 204 drivers/clocksource/asm9260_timer.c pr_err("Failed to enable clk!\n"); pr_err 212 drivers/clocksource/asm9260_timer.c pr_err("Failed to setup irq!\n"); pr_err 79 drivers/clocksource/bcm2835_timer.c pr_err("Can't remap registers\n"); pr_err 85 drivers/clocksource/bcm2835_timer.c pr_err("Can't read clock-frequency\n"); pr_err 97 drivers/clocksource/bcm2835_timer.c pr_err("Can't parse IRQ\n"); pr_err 123 drivers/clocksource/bcm2835_timer.c pr_err("Can't set up timer IRQ\n"); pr_err 93 drivers/clocksource/bcm_kona_timer.c pr_err("bcm_kona_timer: getting counter failed.\n"); pr_err 94 drivers/clocksource/bcm_kona_timer.c pr_err(" Timer will be impacted\n"); pr_err 182 drivers/clocksource/bcm_kona_timer.c pr_err("Kona Timer v1 unable to determine clock-frequency\n"); pr_err 58 drivers/clocksource/clksrc_st_lpc.c pr_err("clksrc-st-lpc: Failed to register clocksource\n"); pr_err 71 drivers/clocksource/clksrc_st_lpc.c pr_err("clksrc-st-lpc: Failed to get LPC clock\n"); pr_err 76 drivers/clocksource/clksrc_st_lpc.c pr_err("clksrc-st-lpc: Failed to enable LPC clock\n"); pr_err 81 drivers/clocksource/clksrc_st_lpc.c pr_err("clksrc-st-lpc: Failed to get LPC clock rate\n"); pr_err 98 drivers/clocksource/clksrc_st_lpc.c pr_err("clksrc-st-lpc: An LPC mode must be provided\n"); pr_err 108 drivers/clocksource/clksrc_st_lpc.c pr_err("clksrc-st-lpc: Unable to map iomem\n"); pr_err 283 drivers/clocksource/dw_apb_timer.c pr_err("failed to request timer irq\n"); pr_err 540 drivers/clocksource/exynos_mct.c pr_err("exynos-mct: cannot register IRQ (cpu%d)\n", pr_err 139 drivers/clocksource/h8300_timer16.c pr_err("failed to get clock for clocksource\n"); pr_err 146 drivers/clocksource/h8300_timer16.c pr_err("failed to map registers for clocksource\n"); pr_err 152 drivers/clocksource/h8300_timer16.c pr_err("failed to map registers for clocksource\n"); pr_err 159 drivers/clocksource/h8300_timer16.c pr_err("failed to get irq for clockevent\n"); pr_err 174 drivers/clocksource/h8300_timer16.c pr_err("failed to request irq %d of clocksource\n", irq); pr_err 168 drivers/clocksource/h8300_timer8.c pr_err("failed to get clock for clockevent\n"); pr_err 175 drivers/clocksource/h8300_timer8.c pr_err("failed to map registers for clockevent\n"); pr_err 182 drivers/clocksource/h8300_timer8.c pr_err("failed to get irq for clockevent\n"); pr_err 190 drivers/clocksource/h8300_timer8.c pr_err("Failed to get rate for the clocksource\n"); pr_err 196 drivers/clocksource/h8300_timer8.c pr_err("failed to request irq %d for clockevent\n", irq); pr_err 131 drivers/clocksource/h8300_tpu.c pr_err("failed to get clock for clocksource\n"); pr_err 137 drivers/clocksource/h8300_tpu.c pr_err("failed to map registers for clocksource\n"); pr_err 142 drivers/clocksource/h8300_tpu.c pr_err("failed to map registers for clocksource\n"); pr_err 145 drivers/clocksource/jcore-pit.c pr_err("Error: Cannot map base address for J-Core PIT\n"); pr_err 151 drivers/clocksource/jcore-pit.c pr_err("Error: J-Core PIT has no IRQ\n"); pr_err 162 drivers/clocksource/jcore-pit.c pr_err("Error registering clocksource device: %d\n", err); pr_err 170 drivers/clocksource/jcore-pit.c pr_err("Failed to allocate memory for clock event device\n"); pr_err 178 drivers/clocksource/jcore-pit.c pr_err("pit irq request failed: %d\n", err); pr_err 223 drivers/clocksource/jcore-pit.c pr_err("Unable to map PIT for cpu %u\n", cpu); pr_err 142 drivers/clocksource/mips-gic-timer.c pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret); pr_err 201 drivers/clocksource/mips-gic-timer.c pr_err("Failed to enable clock\n"); pr_err 209 drivers/clocksource/mips-gic-timer.c pr_err("Frequency not specified\n"); pr_err 214 drivers/clocksource/mips-gic-timer.c pr_err("IRQ not specified\n"); pr_err 112 drivers/clocksource/mps2-timer.c pr_err("failed to get clock for clockevent: %d\n", ret); pr_err 118 drivers/clocksource/mps2-timer.c pr_err("failed to enable clock for clockevent: %d\n", ret); pr_err 128 drivers/clocksource/mps2-timer.c pr_err("failed to map register for clockevent: %d\n", ret); pr_err 135 drivers/clocksource/mps2-timer.c pr_err("failed to get irq for clockevent: %d\n", ret); pr_err 162 drivers/clocksource/mps2-timer.c pr_err("failed to request irq for clockevent: %d\n", ret); pr_err 196 drivers/clocksource/mps2-timer.c pr_err("failed to get clock for clocksource: %d\n", ret); pr_err 202 drivers/clocksource/mps2-timer.c pr_err("failed to enable clock for clocksource: %d\n", ret); pr_err 212 drivers/clocksource/mps2-timer.c pr_err("failed to map register for clocksource: %d\n", ret); pr_err 229 drivers/clocksource/mps2-timer.c pr_err("failed to init clocksource: %d\n", ret); pr_err 223 drivers/clocksource/mxs_timer.c pr_err("%s: failed to get clk\n", __func__); pr_err 228 drivers/clocksource/nomadik-mtu.c pr_err("timer: failed to initialize clock source %s\n", "mtu_0"); pr_err 256 drivers/clocksource/nomadik-mtu.c pr_err("Can't remap registers\n"); pr_err 262 drivers/clocksource/nomadik-mtu.c pr_err("could not get apb_pclk\n"); pr_err 268 drivers/clocksource/nomadik-mtu.c pr_err("could not get timclk\n"); pr_err 274 drivers/clocksource/nomadik-mtu.c pr_err("Can't parse IRQ\n"); pr_err 168 drivers/clocksource/renesas-ostm.c pr_err("ostm: failed to request irq\n"); pr_err 200 drivers/clocksource/renesas-ostm.c pr_err("ostm: failed to remap I/O memory\n"); pr_err 206 drivers/clocksource/renesas-ostm.c pr_err("ostm: Failed to get irq\n"); pr_err 212 drivers/clocksource/renesas-ostm.c pr_err("ostm: Failed to get clock\n"); pr_err 219 drivers/clocksource/renesas-ostm.c pr_err("ostm: Failed to enable clock\n"); pr_err 442 drivers/clocksource/samsung_pwm_timer.c pr_err("%s: failed to map PWM registers\n", __func__); pr_err 250 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to iomap\n"); pr_err 256 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to iomap\n"); pr_err 301 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to initialize clocksource mmio\n"); pr_err 318 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to request percpu irq\n"); pr_err 327 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to setup hotplug state and timer\n"); pr_err 342 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to get clock\n"); pr_err 378 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to get clock\n"); pr_err 402 drivers/clocksource/timer-armada-370-xp.c pr_err("Failed to get clock\n"); pr_err 241 drivers/clocksource/timer-atcpit100.c pr_err("Failed to register clocksource\n"); pr_err 267 drivers/clocksource/timer-atlas7.c pr_err("unable to map timer cpu registers\n"); pr_err 273 drivers/clocksource/timer-atlas7.c pr_err("No irq passed for timer0 via DT\n"); pr_err 279 drivers/clocksource/timer-atlas7.c pr_err("No irq passed for timer1 via DT\n"); pr_err 179 drivers/clocksource/timer-atmel-pit.c pr_err("Could not map PIT address\n"); pr_err 186 drivers/clocksource/timer-atmel-pit.c pr_err("Unable to get mck clk\n"); pr_err 193 drivers/clocksource/timer-atmel-pit.c pr_err("Unable to enable mck\n"); pr_err 200 drivers/clocksource/timer-atmel-pit.c pr_err("Unable to get IRQ from DT\n"); pr_err 229 drivers/clocksource/timer-atmel-pit.c pr_err("Failed to register clocksource\n"); pr_err 238 drivers/clocksource/timer-atmel-pit.c pr_err("Unable to setup IRQ\n"); pr_err 192 drivers/clocksource/timer-atmel-st.c pr_err("Unable to get regmap\n"); pr_err 204 drivers/clocksource/timer-atmel-st.c pr_err("Unable to get IRQ from DT\n"); pr_err 213 drivers/clocksource/timer-atmel-st.c pr_err("Unable to setup IRQ\n"); pr_err 219 drivers/clocksource/timer-atmel-st.c pr_err("Unable to get slow clock\n"); pr_err 225 drivers/clocksource/timer-atmel-st.c pr_err("Could not enable slow clock\n"); pr_err 231 drivers/clocksource/timer-atmel-st.c pr_err("Invalid slow clock rate\n"); pr_err 494 drivers/clocksource/timer-cadence-ttc.c pr_err("ERROR: invalid timer base address\n"); pr_err 500 drivers/clocksource/timer-cadence-ttc.c pr_err("ERROR: invalid interrupt number\n"); pr_err 510 drivers/clocksource/timer-cadence-ttc.c pr_err("ERROR: timer input clock not found\n"); pr_err 518 drivers/clocksource/timer-cadence-ttc.c pr_err("ERROR: timer input clock not found\n"); pr_err 253 drivers/clocksource/timer-davinci.c pr_err("Unable to prepare and enable the timer clock"); pr_err 260 drivers/clocksource/timer-davinci.c pr_err("Unable to request memory region"); pr_err 266 drivers/clocksource/timer-davinci.c pr_err("Unable to map the register range"); pr_err 275 drivers/clocksource/timer-davinci.c pr_err("Error allocating memory for clockevent data"); pr_err 301 drivers/clocksource/timer-davinci.c pr_err("Unable to request the clockevent interrupt"); pr_err 328 drivers/clocksource/timer-davinci.c pr_err("Unable to register clocksource"); pr_err 346 drivers/clocksource/timer-davinci.c pr_err("Unable to get the register range for timer"); pr_err 353 drivers/clocksource/timer-davinci.c pr_err("Unable to get the interrupts for timer"); pr_err 359 drivers/clocksource/timer-davinci.c pr_err("Unable to get the timer clock"); pr_err 164 drivers/clocksource/timer-digicolor.c pr_err("Can't map registers\n"); pr_err 170 drivers/clocksource/timer-digicolor.c pr_err("Can't parse IRQ\n"); pr_err 176 drivers/clocksource/timer-digicolor.c pr_err("Can't get timer clock\n"); pr_err 139 drivers/clocksource/timer-efm32.c pr_err("failed to get clock for clocksource (%d)\n", ret); pr_err 145 drivers/clocksource/timer-efm32.c pr_err("failed to enable timer clock for clocksource (%d)\n", pr_err 154 drivers/clocksource/timer-efm32.c pr_err("failed to map registers for clocksource\n"); pr_err 167 drivers/clocksource/timer-efm32.c pr_err("failed to init clocksource (%d)\n", ret); pr_err 198 drivers/clocksource/timer-efm32.c pr_err("failed to get clock for clockevent (%d)\n", ret); pr_err 204 drivers/clocksource/timer-efm32.c pr_err("failed to enable timer clock for clockevent (%d)\n", pr_err 213 drivers/clocksource/timer-efm32.c pr_err("failed to map registers for clockevent\n"); pr_err 220 drivers/clocksource/timer-efm32.c pr_err("failed to get irq for clockevent\n"); pr_err 235 drivers/clocksource/timer-efm32.c pr_err("Failed setup irq\n"); pr_err 197 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: setup irq failed: %d\n", err); pr_err 227 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: init clock source mmio failed: %d\n", err); pr_err 244 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: Cannot get \"%s\": %ld\n", cnt_name, PTR_ERR(clk)); pr_err 249 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n", pr_err 256 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: Cannot get \"%s\": %ld\n", ftm_name, PTR_ERR(clk)); pr_err 261 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n", pr_err 296 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: the prescaler is %lu > %d\n", pr_err 316 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: unable to map event timer registers\n"); pr_err 322 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: unable to map source timer registers\n"); pr_err 329 drivers/clocksource/timer-fsl-ftm.c pr_err("ftm: unable to get IRQ from DT, %d\n", irq); pr_err 267 drivers/clocksource/timer-fttmr010.c pr_err("could not get PCLK\n"); pr_err 272 drivers/clocksource/timer-fttmr010.c pr_err("failed to enable PCLK\n"); pr_err 285 drivers/clocksource/timer-fttmr010.c pr_err("Can't remap registers\n"); pr_err 292 drivers/clocksource/timer-fttmr010.c pr_err("Can't parse IRQ\n"); pr_err 363 drivers/clocksource/timer-fttmr010.c pr_err("FTTMR010-TIMER1 no IRQ\n"); pr_err 403 drivers/clocksource/timer-imx-gpt.c pr_err("i.MX timer: unable to get clk\n"); pr_err 180 drivers/clocksource/timer-imx-tpm.c pr_err("tpm: failed to get ipg clk\n"); pr_err 186 drivers/clocksource/timer-imx-tpm.c pr_err("tpm: ipg clock enable failed (%d)\n", ret); pr_err 179 drivers/clocksource/timer-integrator-ap.c pr_err("No clock for %pOFn\n", node); pr_err 278 drivers/clocksource/timer-ixp4xx.c pr_err("Can't parse IRQ\n"); pr_err 152 drivers/clocksource/timer-keystone.c pr_err("%s: failed to map interrupts\n", __func__); pr_err 158 drivers/clocksource/timer-keystone.c pr_err("%s: failed to map registers\n", __func__); pr_err 164 drivers/clocksource/timer-keystone.c pr_err("%s: failed to get clock\n", __func__); pr_err 171 drivers/clocksource/timer-keystone.c pr_err("%s: failed to enable clock\n", __func__); pr_err 200 drivers/clocksource/timer-keystone.c pr_err("%s: failed to setup irq\n", __func__); pr_err 168 drivers/clocksource/timer-lpc32xx.c pr_err("clock get failed (%ld)\n", PTR_ERR(clk)); pr_err 174 drivers/clocksource/timer-lpc32xx.c pr_err("clock enable failed (%d)\n", ret); pr_err 180 drivers/clocksource/timer-lpc32xx.c pr_err("unable to map registers\n"); pr_err 200 drivers/clocksource/timer-lpc32xx.c pr_err("failed to init clocksource (%d)\n", ret); pr_err 229 drivers/clocksource/timer-lpc32xx.c pr_err("clock get failed (%ld)\n", PTR_ERR(clk)); pr_err 235 drivers/clocksource/timer-lpc32xx.c pr_err("clock enable failed (%d)\n", ret); pr_err 241 drivers/clocksource/timer-lpc32xx.c pr_err("unable to map registers\n"); pr_err 248 drivers/clocksource/timer-lpc32xx.c pr_err("get irq failed\n"); pr_err 272 drivers/clocksource/timer-lpc32xx.c pr_err("request irq failed\n"); pr_err 167 drivers/clocksource/timer-meson6.c pr_err("Can't map registers\n"); pr_err 173 drivers/clocksource/timer-meson6.c pr_err("Can't parse IRQ\n"); pr_err 58 drivers/clocksource/timer-nps.c pr_err("timer missing clk\n"); pr_err 64 drivers/clocksource/timer-nps.c pr_err("Couldn't enable parent clk\n"); pr_err 71 drivers/clocksource/timer-nps.c pr_err("Couldn't get clk rate\n"); pr_err 106 drivers/clocksource/timer-nps.c pr_err("Couldn't register clock source.\n"); pr_err 250 drivers/clocksource/timer-nps.c pr_err("clockevent: missing irq\n"); pr_err 263 drivers/clocksource/timer-nps.c pr_err("Couldn't request irq\n"); pr_err 273 drivers/clocksource/timer-nps.c pr_err("Failed to setup hotplug state\n"); pr_err 60 drivers/clocksource/timer-of.c pr_err("Failed to get interrupt %s for %s\n", pr_err 68 drivers/clocksource/timer-of.c pr_err("Failed to map interrupt for %pOF\n", np); pr_err 79 drivers/clocksource/timer-of.c pr_err("Failed to request irq %d for %pOF\n", of_irq->irq, np); pr_err 120 drivers/clocksource/timer-of.c pr_err("Failed to get clock for %pOF\n", np); pr_err 126 drivers/clocksource/timer-of.c pr_err("Failed for enable clock for %pOF\n", np); pr_err 133 drivers/clocksource/timer-of.c pr_err("Failed to get clock rate for %pOF\n", np); pr_err 161 drivers/clocksource/timer-of.c pr_err("Failed to iomap (%s)\n", of_base->name); pr_err 132 drivers/clocksource/timer-orion.c pr_err("%pOFn: unable to map resource\n", np); pr_err 138 drivers/clocksource/timer-orion.c pr_err("%pOFn: unable to get clk\n", np); pr_err 144 drivers/clocksource/timer-orion.c pr_err("Failed to prepare clock\n"); pr_err 151 drivers/clocksource/timer-orion.c pr_err("%pOFn: unable to parse timer1 irq\n", np); pr_err 168 drivers/clocksource/timer-orion.c pr_err("Failed to initialize mmio timer\n"); pr_err 177 drivers/clocksource/timer-orion.c pr_err("%pOFn: unable to setup irq\n", np); pr_err 124 drivers/clocksource/timer-owl.c pr_err("Can't map timer registers\n"); pr_err 133 drivers/clocksource/timer-owl.c pr_err("Can't parse timer1 IRQ\n"); pr_err 155 drivers/clocksource/timer-owl.c pr_err("failed to request irq %d\n", timer1_irq); pr_err 203 drivers/clocksource/timer-oxnas-rps.c pr_err("can't register clocksource\n"); pr_err 160 drivers/clocksource/timer-pistachio.c pr_err("cannot iomap\n"); pr_err 166 drivers/clocksource/timer-pistachio.c pr_err("cannot get peripheral regmap (%ld)\n", pr_err 179 drivers/clocksource/timer-pistachio.c pr_err("clock get failed (%ld)\n", PTR_ERR(sys_clk)); pr_err 185 drivers/clocksource/timer-pistachio.c pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk)); pr_err 191 drivers/clocksource/timer-pistachio.c pr_err("failed to enable clock (%d)\n", ret); pr_err 197 drivers/clocksource/timer-pistachio.c pr_err("failed to enable clock (%d)\n", ret); pr_err 198 drivers/clocksource/timer-prima2.c pr_err("Failed to get clock\n"); pr_err 204 drivers/clocksource/timer-prima2.c pr_err("Failed to enable clock\n"); pr_err 211 drivers/clocksource/timer-prima2.c pr_err("Invalid clock rate\n"); pr_err 217 drivers/clocksource/timer-prima2.c pr_err("unable to map timer cpu registers\n"); pr_err 231 drivers/clocksource/timer-prima2.c pr_err("Failed to register clocksource\n"); pr_err 239 drivers/clocksource/timer-prima2.c pr_err("Failed to setup irq\n"); pr_err 33 drivers/clocksource/timer-probe.c pr_err("Failed to initialize '%pOF': %d\n", np, pr_err 166 drivers/clocksource/timer-pxa.c pr_err("Failed to setup irq\n"); pr_err 173 drivers/clocksource/timer-pxa.c pr_err("Failed to init clocksource\n"); pr_err 191 drivers/clocksource/timer-pxa.c pr_err("%pOFn: unable to map resource\n", np); pr_err 123 drivers/clocksource/timer-qcom.c pr_err("request_irq failed\n"); pr_err 163 drivers/clocksource/timer-qcom.c pr_err("memory allocation failed for clockevents\n"); pr_err 172 drivers/clocksource/timer-qcom.c pr_err("request_percpu_irq failed\n"); pr_err 189 drivers/clocksource/timer-qcom.c pr_err("clocksource_register failed\n"); pr_err 208 drivers/clocksource/timer-qcom.c pr_err("Failed to map event base\n"); pr_err 215 drivers/clocksource/timer-qcom.c pr_err("Can't get irq\n"); pr_err 225 drivers/clocksource/timer-qcom.c pr_err("Failed to parse DGT resource\n"); pr_err 231 drivers/clocksource/timer-qcom.c pr_err("Failed to map source base\n"); pr_err 236 drivers/clocksource/timer-qcom.c pr_err("Unknown frequency\n"); pr_err 107 drivers/clocksource/timer-riscv.c pr_err("RISCV timer register failed [%d] for cpu = [%d]\n", pr_err 118 drivers/clocksource/timer-riscv.c pr_err("cpu hp setup state failed for RISCV timer [%d]\n", pr_err 137 drivers/clocksource/timer-rockchip.c pr_err("Failed to get base address for '%s'\n", TIMER_NAME); pr_err 149 drivers/clocksource/timer-rockchip.c pr_err("Failed to get pclk for '%s'\n", TIMER_NAME); pr_err 155 drivers/clocksource/timer-rockchip.c pr_err("Failed to enable pclk for '%s'\n", TIMER_NAME); pr_err 163 drivers/clocksource/timer-rockchip.c pr_err("Failed to get timer clock for '%s'\n", TIMER_NAME); pr_err 169 drivers/clocksource/timer-rockchip.c pr_err("Failed to enable timer clock\n"); pr_err 179 drivers/clocksource/timer-rockchip.c pr_err("Failed to map interrupts for '%s'\n", TIMER_NAME); pr_err 234 drivers/clocksource/timer-rockchip.c pr_err("Failed to initialize '%s': %d\n", pr_err 274 drivers/clocksource/timer-rockchip.c pr_err("Failed to register clocksource\n"); pr_err 299 drivers/clocksource/timer-rockchip.c pr_err("Too many timer definitions for '%s'\n", TIMER_NAME); pr_err 32 drivers/clocksource/timer-sp804.c pr_err("sp804: clock failed to prepare: %d\n", err); pr_err 39 drivers/clocksource/timer-sp804.c pr_err("sp804: clock failed to enable: %d\n", err); pr_err 47 drivers/clocksource/timer-sp804.c pr_err("sp804: clock failed to get rate: %ld\n", rate); pr_err 78 drivers/clocksource/timer-sp804.c pr_err("sp804: clock not found: %d\n", pr_err 186 drivers/clocksource/timer-sp804.c pr_err("sp804: %s clock not found: %d\n", name, pr_err 239 drivers/clocksource/timer-sp804.c pr_err("sp804: %pOFn clock not found: %d\n", np, pr_err 290 drivers/clocksource/timer-sp804.c pr_err("Failed to iomap\n"); pr_err 296 drivers/clocksource/timer-sp804.c pr_err("Failed to get clock\n"); pr_err 198 drivers/clocksource/timer-sun4i.c pr_err("Failed to register clocksource\n"); pr_err 200 drivers/clocksource/timer-sun5i.c pr_err("Couldn't enable parent clock\n"); pr_err 206 drivers/clocksource/timer-sun5i.c pr_err("Couldn't get parent clock rate\n"); pr_err 218 drivers/clocksource/timer-sun5i.c pr_err("Unable to register clock notifier.\n"); pr_err 234 drivers/clocksource/timer-sun5i.c pr_err("Couldn't register clock source.\n"); pr_err 278 drivers/clocksource/timer-sun5i.c pr_err("Couldn't enable parent clock\n"); pr_err 284 drivers/clocksource/timer-sun5i.c pr_err("Couldn't get parent clock rate\n"); pr_err 297 drivers/clocksource/timer-sun5i.c pr_err("Unable to register clock notifier.\n"); pr_err 322 drivers/clocksource/timer-sun5i.c pr_err("Unable to register interrupt\n"); pr_err 346 drivers/clocksource/timer-sun5i.c pr_err("Can't map registers\n"); pr_err 352 drivers/clocksource/timer-sun5i.c pr_err("Can't parse IRQ\n"); pr_err 358 drivers/clocksource/timer-sun5i.c pr_err("Can't get timer clock\n"); pr_err 30 drivers/clocksource/timer-tango-xtal.c pr_err("%pOF: invalid address\n", np); pr_err 36 drivers/clocksource/timer-tango-xtal.c pr_err("%pOF: invalid clock\n", np); pr_err 47 drivers/clocksource/timer-tango-xtal.c pr_err("%pOF: registration failed\n", np); pr_err 310 drivers/clocksource/timer-tegra.c pr_err("failed to map irq for cpu%d\n", cpu); pr_err 327 drivers/clocksource/timer-tegra.c pr_err("failed to set up irq for cpu%d: %d\n", pr_err 341 drivers/clocksource/timer-tegra.c pr_err("failed to register clocksource: %d\n", ret); pr_err 351 drivers/clocksource/timer-tegra.c pr_err("failed to set up cpu hp state: %d\n", ret); pr_err 85 drivers/clocksource/timer-ti-32k.c pr_err("Can't ioremap 32k timer base\n"); pr_err 109 drivers/clocksource/timer-ti-32k.c pr_err("32k_counter: can't register clocksource\n"); pr_err 163 drivers/clocksource/timer-ti-dm.c pr_err("%s: failed to set parent\n", __func__); pr_err 212 drivers/clocksource/timer-ti-dm.c pr_err("%s: %s not found\n", __func__, parent_name); pr_err 218 drivers/clocksource/timer-ti-dm.c pr_err("%s: failed to set %s as parent\n", __func__, pr_err 512 drivers/clocksource/timer-ti-dm.c pr_err("%s: timer not available or enabled.\n", __func__); pr_err 711 drivers/clocksource/timer-ti-dm.c pr_err("%s: timer not available or enabled.\n", __func__); pr_err 733 drivers/clocksource/timer-ti-dm.c pr_err("%s: timer not iavailable or enabled.\n", __func__); pr_err 743 drivers/clocksource/timer-ti-dm.c pr_err("%s: timer not available or enabled.\n", __func__); pr_err 371 drivers/clocksource/timer-u300.c pr_err("could not ioremap system timer\n"); pr_err 378 drivers/clocksource/timer-u300.c pr_err("no IRQ for system timer\n"); pr_err 446 drivers/clocksource/timer-u300.c pr_err("timer: failed to initialize U300 clock source\n"); pr_err 164 drivers/clocksource/timer-vf-pit.c pr_err("Failed to iomap\n"); pr_err 117 drivers/clocksource/timer-vt8500.c pr_err("%s: Missing iobase description in Device Tree\n", pr_err 124 drivers/clocksource/timer-vt8500.c pr_err("%s: Missing irq description in Device Tree\n", pr_err 135 drivers/clocksource/timer-vt8500.c pr_err("%s: clocksource_register failed for %s\n", pr_err 144 drivers/clocksource/timer-vt8500.c pr_err("%s: setup_irq failed for %s\n", __func__, pr_err 138 drivers/clocksource/timer-zevio.c pr_err("Timer clock not found! (error %d)\n", ret); pr_err 30 drivers/connector/cn_queue.c pr_err("Failed to create new callback queue.\n"); pr_err 916 drivers/cpufreq/acpi-cpufreq.c pr_err("acpi_cpufreq: failed to register hotplug callbacks\n"); pr_err 168 drivers/cpufreq/arm_big_little.c pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret, pr_err 201 drivers/cpufreq/arm_big_little.c pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n", pr_err 339 drivers/cpufreq/arm_big_little.c pr_err("%s: failed to get cpu%d device\n", __func__, i); pr_err 418 drivers/cpufreq/arm_big_little.c pr_err("%s: failed to get cpu%d device\n", __func__, i); pr_err 444 drivers/cpufreq/arm_big_little.c pr_err("%s: failed to get cpu%d device\n", __func__, i); pr_err 465 drivers/cpufreq/arm_big_little.c pr_err("%s: failed to get cpu%d device\n", __func__, pr_err 511 drivers/cpufreq/arm_big_little.c pr_err("%s: failed to get cpu%d device\n", __func__, pr_err 606 drivers/cpufreq/arm_big_little.c pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__); pr_err 641 drivers/cpufreq/arm_big_little.c pr_err("%s: Registered with: %s, can't unregister, exiting\n", pr_err 114 drivers/cpufreq/armada-37xx-cpufreq.c pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000); pr_err 221 drivers/cpufreq/armada-37xx-cpufreq.c pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min); pr_err 156 drivers/cpufreq/armada-8k-cpufreq.c pr_err("Cannot get CPU %d\n", cpu); pr_err 163 drivers/cpufreq/armada-8k-cpufreq.c pr_err("Cannot get clock for CPU %d\n", cpu); pr_err 137 drivers/cpufreq/bmips-cpufreq.c pr_err("%s: couldn't determine frequency table (%ld).\n", pr_err 103 drivers/cpufreq/cpufreq-dt.c pr_err("failed to get cpu0 device\n"); pr_err 162 drivers/cpufreq/cpufreq-dt.c pr_err("failed to get cpu%d device\n", policy->cpu); pr_err 175 drivers/cpufreq/cpufreq-nforce2.c pr_err("FSB %d is out of range!\n", fsb); pr_err 181 drivers/cpufreq/cpufreq-nforce2.c pr_err("Error while reading the FSB\n"); pr_err 277 drivers/cpufreq/cpufreq-nforce2.c pr_err("Changing FSB to %d failed\n", target_fsb); pr_err 193 drivers/cpufreq/cpufreq.c pr_err("%s: No %s associated to cpu: %d\n", pr_err 596 drivers/cpufreq/cpufreq.c pr_err("%s: Cannot %s BOOST!\n", pr_err 1107 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to start governor\n", __func__); pr_err 1413 drivers/cpufreq/cpufreq.c pr_err("%s: ->get() failed\n", __func__); pr_err 1472 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to initialize policy for cpu: %d (%d)\n", pr_err 1569 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to start governor\n", __func__); pr_err 1789 drivers/cpufreq/cpufreq.c pr_err("%s: unable to set suspend-freq: %u. err: %d\n", pr_err 1824 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to suspend driver: %s\n", __func__, pr_err 1858 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to resume driver: %p\n", __func__, pr_err 1866 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to start governor for policy: %p\n", pr_err 2050 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to change to intermediate frequency: %d\n", pr_err 2090 drivers/cpufreq/cpufreq.c pr_err("%s: Failed to change cpu frequency: %d\n", __func__, pr_err 2520 drivers/cpufreq/cpufreq.c pr_err("%s: Policy frequency update failed\n", pr_err 2551 drivers/cpufreq/cpufreq.c pr_err("%s: Cannot %s BOOST\n", pr_err 2569 drivers/cpufreq/cpufreq.c pr_err("%s: cannot register global BOOST sysfs file\n", pr_err 457 drivers/cpufreq/cpufreq_governor.c pr_err("initialization failed (dbs_data kobject init error %d)\n", ret); pr_err 168 drivers/cpufreq/e_powersaver.c pr_err("Timeout!\n"); pr_err 72 drivers/cpufreq/highbank-cpufreq.c pr_err("failed to get highbank cpufreq device\n"); pr_err 78 drivers/cpufreq/highbank-cpufreq.c pr_err("failed to find highbank cpufreq node\n"); pr_err 85 drivers/cpufreq/highbank-cpufreq.c pr_err("failed to get cpu0 clock: %d\n", ret); pr_err 91 drivers/cpufreq/highbank-cpufreq.c pr_err("failed to register clk notifier: %d\n", ret); pr_err 342 drivers/cpufreq/imx6q-cpufreq.c pr_err("failed to get cpu0 device\n"); pr_err 714 drivers/cpufreq/longhaul.c pr_err("Can't enable access to port 0x22\n"); pr_err 881 drivers/cpufreq/longhaul.c pr_err("No ACPI support: Unsupported northbridge\n"); pr_err 926 drivers/cpufreq/longhaul.c pr_err("Option \"enable\" not set - Aborting\n"); pr_err 931 drivers/cpufreq/longhaul.c pr_err("More than 1 CPU detected, longhaul disabled\n"); pr_err 937 drivers/cpufreq/longhaul.c pr_err("APIC detected. Longhaul is currently broken in this configuration.\n"); pr_err 945 drivers/cpufreq/longhaul.c pr_err("Use acpi-cpufreq driver for VIA C7\n"); pr_err 75 drivers/cpufreq/loongson2_cpufreq.c pr_err("couldn't get CPU clk\n"); pr_err 177 drivers/cpufreq/maple-cpufreq.c pr_err("Can't find any CPU 0 node\n"); pr_err 185 drivers/cpufreq/maple-cpufreq.c pr_err("Unsupported CPU version (%x)\n", pvr_hi); pr_err 70 drivers/cpufreq/mediatek-cpufreq.c pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc); pr_err 86 drivers/cpufreq/mediatek-cpufreq.c pr_err("%s: invalid Vsram value: %d\n", pr_err 92 drivers/cpufreq/mediatek-cpufreq.c pr_err("%s: invalid Vproc value: %d\n", pr_err 141 drivers/cpufreq/mediatek-cpufreq.c pr_err("%s: invalid Vproc value: %d\n", pr_err 147 drivers/cpufreq/mediatek-cpufreq.c pr_err("%s: invalid Vsram value: %d\n", pr_err 219 drivers/cpufreq/mediatek-cpufreq.c pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc); pr_err 227 drivers/cpufreq/mediatek-cpufreq.c pr_err("cpu%d: failed to find OPP for %ld\n", pr_err 242 drivers/cpufreq/mediatek-cpufreq.c pr_err("cpu%d: failed to scale up voltage!\n", pr_err 252 drivers/cpufreq/mediatek-cpufreq.c pr_err("cpu%d: failed to re-parent cpu clock!\n", pr_err 262 drivers/cpufreq/mediatek-cpufreq.c pr_err("cpu%d: failed to scale cpu clock rate!\n", pr_err 272 drivers/cpufreq/mediatek-cpufreq.c pr_err("cpu%d: failed to re-parent cpu clock!\n", pr_err 286 drivers/cpufreq/mediatek-cpufreq.c pr_err("cpu%d: failed to scale down voltage!\n", pr_err 313 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to get cpu%d device\n", cpu); pr_err 322 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to get cpu clk for cpu%d\n", cpu); pr_err 334 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to get intermediate clk for cpu%d\n", pr_err 347 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to get proc regulator for cpu%d\n", pr_err 360 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to get OPP-sharing information for cpu%d\n", pr_err 375 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to get intermediate opp for cpu%d\n", cpu); pr_err 434 drivers/cpufreq/mediatek-cpufreq.c pr_err("dvfs info for cpu%d is not initialized.\n", pr_err 441 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to init cpufreq table for cpu%d: %d\n", pr_err 574 drivers/cpufreq/mediatek-cpufreq.c pr_err("failed to register mtk-cpufreq platform device\n"); pr_err 69 drivers/cpufreq/mvebu-cpufreq.c pr_err("Cannot get CPU %d\n", cpu); pr_err 75 drivers/cpufreq/mvebu-cpufreq.c pr_err("Cannot get clock for CPU %d\n", cpu); pr_err 598 drivers/cpufreq/pcc-cpufreq.c pr_err("%s: Too many CPUs, dynamic performance scaling disabled\n", pr_err 600 drivers/cpufreq/pcc-cpufreq.c pr_err("%s: Try to enable another scaling driver through BIOS settings\n", pr_err 602 drivers/cpufreq/pcc-cpufreq.c pr_err("%s: and complain to the system vendor\n", __func__); pr_err 484 drivers/cpufreq/pmac32-cpufreq.c pr_err("bus-frequencies incorrect or missing\n"); pr_err 490 drivers/cpufreq/pmac32-cpufreq.c pr_err("processor-to-bus-ratio*2 missing\n"); pr_err 554 drivers/cpufreq/pmac32-cpufreq.c pr_err("missing cpu-vcore-select gpio\n"); pr_err 371 drivers/cpufreq/pmac64-cpufreq.c pr_err("Unsupported CPU version\n"); pr_err 406 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find root of device tree\n"); pr_err 415 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find required platform function\n"); pr_err 495 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find cpuid EEPROM !\n"); pr_err 513 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find i2c clock chip !\n"); pr_err 541 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find platform functions !\n"); pr_err 569 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find CPU frequency !\n"); pr_err 596 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't calculate low frequency !\n"); pr_err 655 drivers/cpufreq/pmac64-cpufreq.c pr_err("Can't find any CPU node\n"); pr_err 144 drivers/cpufreq/powernow-k6.c pr_err("invalid target frequency\n"); pr_err 178 drivers/cpufreq/powernow-k6.c pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); pr_err 197 drivers/cpufreq/powernow-k6.c pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); pr_err 153 drivers/cpufreq/powernow-k8.c pr_err("internal error - overflow on fid write\n"); pr_err 167 drivers/cpufreq/powernow-k8.c pr_err("Hardware error - pending bit very stuck - no further pstate changes possible\n"); pr_err 175 drivers/cpufreq/powernow-k8.c pr_err("vid change on fid trans, old 0x%x, new 0x%x\n", pr_err 181 drivers/cpufreq/powernow-k8.c pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid, pr_err 197 drivers/cpufreq/powernow-k8.c pr_err("internal error - overflow on vid write\n"); pr_err 211 drivers/cpufreq/powernow-k8.c pr_err("internal error - pending bit very stuck - no further pstate changes possible\n"); pr_err 217 drivers/cpufreq/powernow-k8.c pr_err("fid changed on vid trans, old 0x%x new 0x%x\n", pr_err 223 drivers/cpufreq/powernow-k8.c pr_err("vid trans failed, vid 0x%x, curr 0x%x\n", pr_err 267 drivers/cpufreq/powernow-k8.c pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", pr_err 324 drivers/cpufreq/powernow-k8.c pr_err("ph1 err, currfid changed 0x%x\n", data->currfid); pr_err 341 drivers/cpufreq/powernow-k8.c pr_err("ph2 null fid transition 0x%x\n", data->currfid); pr_err 388 drivers/cpufreq/powernow-k8.c pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", pr_err 394 drivers/cpufreq/powernow-k8.c pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n", pr_err 421 drivers/cpufreq/powernow-k8.c pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n", pr_err 427 drivers/cpufreq/powernow-k8.c pr_err("ph3: failed vid transition\n, req 0x%x, curr 0x%x", pr_err 500 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "vid %d invalid : 0x%x\n", j, pr_err 506 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j); pr_err 511 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j); pr_err 515 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j); pr_err 520 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "two low fids - %d : 0x%x\n", j, pr_err 528 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "lastfid invalid\n"); pr_err 574 drivers/cpufreq/powernow-k8.c pr_err("PST out of sequence\n"); pr_err 580 drivers/cpufreq/powernow-k8.c pr_err("no p states to transition\n"); pr_err 643 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "PSB table is not v1.4\n"); pr_err 649 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "unknown flags\n"); pr_err 678 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "numpst must be 1\n"); pr_err 704 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "No PSB or ACPI _PSS objects\n"); pr_err 705 drivers/cpufreq/powernow-k8.c pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup\n"); pr_err 778 drivers/cpufreq/powernow-k8.c pr_err("unable to alloc powernow_k8_data cpumask\n"); pr_err 872 drivers/cpufreq/powernow-k8.c pr_err(FW_WARN "Invalid zero transition latency\n"); pr_err 947 drivers/cpufreq/powernow-k8.c pr_err("failing targ, change pending bit set\n"); pr_err 975 drivers/cpufreq/powernow-k8.c pr_err("transition frequency failed\n"); pr_err 1004 drivers/cpufreq/powernow-k8.c pr_err("failing init, change pending bit set\n"); pr_err 1051 drivers/cpufreq/powernow-k8.c pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n"); pr_err 119 drivers/cpufreq/ppc_cbe_cpufreq_pmi.c pr_err("Failed to add freq constraint (%d)\n", ret); pr_err 128 drivers/cpufreq/pxa2xx-cpufreq.c pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax); pr_err 193 drivers/cpufreq/pxa3xx-cpufreq.c pr_err("failed to setup frequency table\n"); pr_err 187 drivers/cpufreq/qcom-cpufreq-hw.c pr_err("%s: failed to get cpu%d device\n", __func__, pr_err 65 drivers/cpufreq/qoriq-cpufreq.c pr_err("%s: can't get bus frequency %ld\n", pr_err 100 drivers/cpufreq/qoriq-cpufreq.c pr_err("%s: no clock for cpu %d\n", __func__, i); pr_err 182 drivers/cpufreq/qoriq-cpufreq.c pr_err("%s: no clock information\n", __func__); pr_err 29 drivers/cpufreq/raspberrypi-cpufreq.c pr_err("Cannot get CPU for cpufreq driver\n"); pr_err 199 drivers/cpufreq/s3c2412-cpufreq.c pr_err("cannot find hclk clock\n"); pr_err 205 drivers/cpufreq/s3c2412-cpufreq.c pr_err("cannot find fclk clock\n"); pr_err 220 drivers/cpufreq/s3c2412-cpufreq.c pr_err("cannot find arm clock\n"); pr_err 226 drivers/cpufreq/s3c2412-cpufreq.c pr_err("cannot find xtal clock\n"); pr_err 109 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n", pr_err 134 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret); pr_err 151 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); pr_err 182 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); pr_err 195 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n", pr_err 206 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n", pr_err 271 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Unable to check supported voltages\n"); pr_err 347 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret); pr_err 373 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n", pr_err 383 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret); pr_err 390 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret); pr_err 399 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: HCLK not at 133MHz\n"); pr_err 407 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret); pr_err 415 drivers/cpufreq/s3c2416-cpufreq.c pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); pr_err 275 drivers/cpufreq/s3c2440-cpufreq.c pr_err("%s: failed to get clocks\n", __func__); pr_err 146 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c pr_err("%s: error creating debugfs root\n", __func__); pr_err 177 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("no divisors for %d\n", target_freq); pr_err 189 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: no IO timings\n", __func__); pr_err 264 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("no compatible settings for %d\n", target_freq); pr_err 343 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("failed to get clock '%s'\n", name); pr_err 368 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: could not get clock(s)\n", __func__); pr_err 415 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: failed to reset pll/freq\n", __func__); pr_err 440 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: failed to pass valid information\n", __func__); pr_err 490 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: get_iotiming undefined\n", __func__); pr_err 498 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: failed to get timings\n", __func__); pr_err 590 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: failed to get io timing\n", pr_err 597 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("%s: no IO support registered\n", __func__); pr_err 649 drivers/cpufreq/s3c24xx-cpufreq.c pr_err("no memory for PLL tables\n"); pr_err 70 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Failed to set VDDARM for %dkHz: %d\n", pr_err 79 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Failed to set rate %dkHz: %d\n", pr_err 90 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Failed to set VDDARM for %dkHz: %d\n", pr_err 93 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Failed to restore original clock rate\n"); pr_err 115 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Unable to check supported voltages\n"); pr_err 153 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("No frequency information for this CPU\n"); pr_err 159 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Unable to obtain ARMCLK: %ld\n", pr_err 167 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Failed to obtain VDDARM: %ld\n", PTR_ERR(vddarm)); pr_err 168 drivers/cpufreq/s3c64xx-cpufreq.c pr_err("Only frequency scaling available\n"); pr_err 207 drivers/cpufreq/s5pv210-cpufreq.c pr_err("Cannot find DMC port\n"); pr_err 236 drivers/cpufreq/s5pv210-cpufreq.c pr_err("Denied access to %s as it is disabled temporarily\n", pr_err 531 drivers/cpufreq/s5pv210-cpufreq.c pr_err("CPUFreq doesn't support this memory type\n"); pr_err 600 drivers/cpufreq/s5pv210-cpufreq.c pr_err("failed to get regulator vddarm\n"); pr_err 609 drivers/cpufreq/s5pv210-cpufreq.c pr_err("failed to get regulator vddint\n"); pr_err 616 drivers/cpufreq/s5pv210-cpufreq.c pr_err("%s: failed to find clock controller DT node\n", pr_err 625 drivers/cpufreq/s5pv210-cpufreq.c pr_err("%s: failed to map clock registers\n", __func__); pr_err 633 drivers/cpufreq/s5pv210-cpufreq.c pr_err("%s: failed to get alias of dmc node '%pOFn'\n", pr_err 642 drivers/cpufreq/s5pv210-cpufreq.c pr_err("%s: failed to map dmc%d registers\n", pr_err 652 drivers/cpufreq/s5pv210-cpufreq.c pr_err("%s: failed to find dmc%d node\n", __func__, id); pr_err 43 drivers/cpufreq/sc520_freq.c pr_err("error: cpuctl register has unexpected value %02x\n", pr_err 112 drivers/cpufreq/sc520_freq.c pr_err("sc520_freq: error: failed to remap memory\n"); pr_err 113 drivers/cpufreq/scmi-cpufreq.c pr_err("failed to get cpu%d device\n", cpu); pr_err 144 drivers/cpufreq/scmi-cpufreq.c pr_err("failed to get cpu%d device\n", policy->cpu); pr_err 107 drivers/cpufreq/scpi-cpufreq.c pr_err("failed to get cpu%d device\n", policy->cpu); pr_err 33 drivers/cpufreq/sfi-cpufreq.c pr_err("No p-states discovered\n"); pr_err 65 drivers/cpufreq/spear-cpufreq.c pr_err("Failed to get %s clock\n", sys_clk_src[pclk]); pr_err 83 drivers/cpufreq/spear-cpufreq.c pr_err("failed to get cpu's parent (sys) clock\n"); pr_err 90 drivers/cpufreq/spear-cpufreq.c pr_err("Failed to set sys clk rate to %lu\n", newfreq); pr_err 96 drivers/cpufreq/spear-cpufreq.c pr_err("Failed to set sys clk parent\n"); pr_err 122 drivers/cpufreq/spear-cpufreq.c pr_err("Failed to get src clk\n"); pr_err 138 drivers/cpufreq/spear-cpufreq.c pr_err("clk_round_rate failed for cpu src clock\n"); pr_err 148 drivers/cpufreq/spear-cpufreq.c pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret); pr_err 181 drivers/cpufreq/spear-cpufreq.c pr_err("No cpu node found\n"); pr_err 191 drivers/cpufreq/spear-cpufreq.c pr_err("Invalid cpufreq_tbl\n"); pr_err 216 drivers/cpufreq/spear-cpufreq.c pr_err("Unable to get CPU clock\n"); pr_err 225 drivers/cpufreq/spear-cpufreq.c pr_err("failed register driver: %d\n", ret); pr_err 73 drivers/cpufreq/speedstep-ich.c pr_err("could not find speedstep register\n"); pr_err 79 drivers/cpufreq/speedstep-ich.c pr_err("could not find speedstep register\n"); pr_err 141 drivers/cpufreq/speedstep-ich.c pr_err("change failed - I/O error\n"); pr_err 157 drivers/cpufreq/speedstep-lib.c pr_err("PCORE - MSR_FSB_FREQ undefined value\n"); pr_err 207 drivers/cpufreq/speedstep-smi.c pr_err("change to state %u failed with new_state %u and result %u\n", pr_err 61 drivers/cpufreq/sun50i-cpufreq-nvmem.c pr_err("Could not get nvmem cell: %ld\n", pr_err 117 drivers/cpufreq/sun50i-cpufreq-nvmem.c pr_err("Failed to set prop name\n"); pr_err 130 drivers/cpufreq/sun50i-cpufreq-nvmem.c pr_err("Failed to register platform device\n"); pr_err 230 drivers/cpufreq/ti-cpufreq.c pr_err("%s: Failed to get device for CPU0\n", __func__); pr_err 118 drivers/cpuidle/cpuidle-arm.c pr_err("CPU %d failed to init idle CPU ops\n", cpu); pr_err 154 drivers/cpuidle/cpuidle-cps.c pr_err("Failed to register CPS cpuidle driver\n"); pr_err 167 drivers/cpuidle/cpuidle-cps.c pr_err("Failed to register CPU%d cpuidle device\n", pr_err 190 drivers/cpuidle/cpuidle-psci.c pr_err("CPU %d failed to PSCI idle\n", cpu); pr_err 699 drivers/cpuidle/cpuidle.c pr_err("failed to register cpuidle driver\n"); pr_err 720 drivers/cpuidle/cpuidle.c pr_err("Failed to register cpuidle device for cpu%d\n", cpu); pr_err 203 drivers/cpuidle/dt_idle_states.c pr_err("Parsing idle state node %pOF failed with err %d\n", pr_err 536 drivers/crypto/amcc/crypto4xx_alg.c pr_err("aes_expandkey() failed: %d\n", rc); pr_err 593 drivers/crypto/amcc/crypto4xx_alg.c pr_err("GCM hash key setting failed = %d\n", rc); pr_err 615 drivers/crypto/amcc/crypto4xx_core.c pr_err("pad fail error\n"); pr_err 617 drivers/crypto/amcc/crypto4xx_core.c pr_err("seqnum fail\n"); pr_err 619 drivers/crypto/amcc/crypto4xx_core.c pr_err("error _notify\n"); pr_err 620 drivers/crypto/amcc/crypto4xx_core.c pr_err("aead return err status = 0x%02x\n", pr_err 622 drivers/crypto/amcc/crypto4xx_core.c pr_err("pd pad_ctl = 0x%08x\n", pr_err 268 drivers/crypto/atmel-ecc.c pr_err("tfm - i2c_client binding failed\n"); pr_err 336 drivers/crypto/atmel-tdes.c pr_err("not all data converted: %zu\n", count); pr_err 384 drivers/crypto/atmel-tdes.c pr_err("error: %d\n", err); pr_err 661 drivers/crypto/atmel-tdes.c pr_err("not all data converted: %zu\n", count); pr_err 676 drivers/crypto/atmel-tdes.c pr_err("request size is not exact amount of CFB8 blocks\n"); pr_err 682 drivers/crypto/atmel-tdes.c pr_err("request size is not exact amount of CFB16 blocks\n"); pr_err 688 drivers/crypto/atmel-tdes.c pr_err("request size is not exact amount of CFB32 blocks\n"); pr_err 694 drivers/crypto/atmel-tdes.c pr_err("request size is not exact amount of DES blocks\n"); pr_err 552 drivers/crypto/axis/artpec6_crypto.c pr_err("No free OUT DMA descriptors available!\n"); pr_err 585 drivers/crypto/axis/artpec6_crypto.c pr_err("No free OUT DMA descriptors available!\n"); pr_err 744 drivers/crypto/axis/artpec6_crypto.c pr_err("No free IN DMA descriptors available!\n"); pr_err 879 drivers/crypto/axis/artpec6_crypto.c pr_err("EOL unexpected %zu bytes left\n", count); pr_err 936 drivers/crypto/axis/artpec6_crypto.c pr_err("EOL unexpected %zu bytes left\n", count); pr_err 957 drivers/crypto/axis/artpec6_crypto.c pr_err("%s: OUT descriptor list is %s\n", pr_err 981 drivers/crypto/axis/artpec6_crypto.c pr_err("%s: IN descriptor list is %s\n", pr_err 1720 drivers/crypto/axis/artpec6_crypto.c pr_err("%s: Invalid key length %d!\n", pr_err 1752 drivers/crypto/axis/artpec6_crypto.c pr_err("%s: Invalid cipher mode %d!\n", pr_err 2238 drivers/crypto/axis/artpec6_crypto.c pr_err("Invalid length (%d) of HMAC key\n", pr_err 2288 drivers/crypto/axis/artpec6_crypto.c pr_err("%s: Unsupported hash type 0x%x\n", MODULE_NAME, type); pr_err 163 drivers/crypto/bcm/cipher.c pr_err("%s(): failed to copy dst sg to mbox msg. chunksize %u, datalen %u", pr_err 231 drivers/crypto/bcm/cipher.c pr_err("%s(): failed to copy src sg to mbox msg", pr_err 645 drivers/crypto/bcm/cipher.c pr_err("%s(): failed to copy src sg to mbox msg", pr_err 862 drivers/crypto/bcm/cipher.c pr_err("Failed to create SPU request header\n"); pr_err 967 drivers/crypto/bcm/cipher.c pr_err("%s() Error : unknown hmac type\n", __func__); pr_err 1145 drivers/crypto/bcm/cipher.c pr_err("%s(): failed to copy dst sg to mbox msg. expected len %u, datalen %u", pr_err 1235 drivers/crypto/bcm/cipher.c pr_err("%s(): failed to copy assoc sg to mbox msg", pr_err 1257 drivers/crypto/bcm/cipher.c pr_err("%s(): failed to copy src sg to mbox msg", pr_err 1672 drivers/crypto/bcm/cipher.c pr_err("%s(): no request context", __func__); pr_err 1903 drivers/crypto/bcm/cipher.c pr_err("%s() Error: unknown cipher alg\n", __func__); pr_err 2336 drivers/crypto/bcm/cipher.c pr_err("%s() Error: Invalid key length\n", __func__); pr_err 2340 drivers/crypto/bcm/cipher.c pr_err("%s() Error: unknown hash alg\n", __func__); pr_err 2436 drivers/crypto/bcm/cipher.c pr_err("%s() Error: unknown hash alg\n", __func__); pr_err 2440 drivers/crypto/bcm/cipher.c pr_err("%s() Error %d computing shash for %s\n", pr_err 2708 drivers/crypto/bcm/cipher.c pr_err pr_err 2737 drivers/crypto/bcm/cipher.c pr_err("%s() Error: Unable to find start of src data\n", pr_err 2755 drivers/crypto/bcm/cipher.c pr_err("%s() Error: Unable to find start of dst data\n", pr_err 2880 drivers/crypto/bcm/cipher.c pr_err("%s() Error: Unknown cipher alg\n", __func__); pr_err 4351 drivers/crypto/bcm/cipher.c pr_err("%s() Error: failed to allocate fallback for %s\n", pr_err 1144 drivers/crypto/bcm/spu.c pr_err("%s() Warning: Error result from SPU: %#08x\n", pr_err 1176 drivers/crypto/bcm/spu.c pr_err("%s(): Invalid IV len %d for CCM mode, should be %d\n", pr_err 223 drivers/crypto/bcm/util.c pr_err("%s: Crypto %s allocation error %d\n", __func__, name, rc); pr_err 238 drivers/crypto/bcm/util.c pr_err("%s: Could not setkey %s shash\n", __func__, name); pr_err 245 drivers/crypto/bcm/util.c pr_err("%s: Could not init %s shash\n", __func__, name); pr_err 250 drivers/crypto/bcm/util.c pr_err("%s: Could not update1\n", __func__); pr_err 256 drivers/crypto/bcm/util.c pr_err("%s: Could not update2\n", __func__); pr_err 262 drivers/crypto/bcm/util.c pr_err("%s: Could not generate %s hash\n", __func__, name); pr_err 3416 drivers/crypto/caam/caamalg.c pr_err("Job Ring Device allocation for transform failed\n"); pr_err 2428 drivers/crypto/caam/caamalg_qi.c pr_err("Job Ring Device allocation for transform failed\n"); pr_err 1833 drivers/crypto/caam/caamhash.c pr_err("Job Ring Device allocation for transform failed\n"); pr_err 1948 drivers/crypto/caam/caamhash.c pr_err("failed to allocate t_alg\n"); pr_err 1038 drivers/crypto/caam/caampkc.c pr_err("Job Ring Device allocation for transform failed\n"); pr_err 333 drivers/crypto/caam/caamrng.c pr_err("Job Ring Device allocation for transform failed\n"); pr_err 32 drivers/crypto/caam/error.c pr_err("caam_dump_sg: kmap failed\n"); pr_err 518 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c pr_err("comp not done\n"); pr_err 106 drivers/crypto/cavium/nitrox/nitrox_skcipher.c pr_err("unsupported cipher: %s\n", name); pr_err 160 drivers/crypto/cavium/zip/common.h pr_err("ZIP ERR: request timed out"); pr_err 174 drivers/crypto/cavium/zip/common.h #define zip_err(fmt, args...) pr_err("ZIP ERR:%s():%d: " \ pr_err 448 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_COREX_BIST_STATUS: %llu\n", param1); pr_err 542 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_DBG_COREX_INST: %llu\n", param1); pr_err 573 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_DBG_COREX_STA: %llu\n", param1); pr_err 604 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_DBG_QUEX_STA: %llu\n", param1); pr_err 822 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_MSIX_PBAX: %llu\n", param1); pr_err 851 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_MSIX_VECX_ADDR: %llu\n", param1); pr_err 880 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_MSIX_VECX_CTL: %llu\n", param1); pr_err 905 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_DONE: %llu\n", param1); pr_err 930 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_DONE_ACK: %llu\n", param1); pr_err 955 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_DONE_ENA_W1C: %llu\n", param1); pr_err 980 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_DONE_ENA_W1S: %llu\n", param1); pr_err 1009 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_DONE_WAIT: %llu\n", param1); pr_err 1034 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_DOORBELL: %llu\n", param1); pr_err 1063 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_ERR_ENA_W1C: %llu\n", param1); pr_err 1092 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_ERR_ENA_W1S: %llu\n", param1); pr_err 1125 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_ERR_INT: %llu\n", param1); pr_err 1155 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_ERR_INT_W1S: %llu\n", param1); pr_err 1184 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_GCFG: %llu\n", param1); pr_err 1209 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_MAP: %llu\n", param1); pr_err 1241 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_SBUF_ADDR: %llu\n", param1); pr_err 1281 drivers/crypto/cavium/zip/zip_regs.h pr_err("ZIP_QUEX_SBUF_CTL: %llu\n", param1); pr_err 392 drivers/crypto/ccp/ccp-crypto-aes-cmac.c pr_err("%s ahash algorithm registration error (%d)\n", pr_err 236 drivers/crypto/ccp/ccp-crypto-aes-galois.c pr_err("%s ablkcipher algorithm registration error (%d)\n", pr_err 264 drivers/crypto/ccp/ccp-crypto-aes-xts.c pr_err("%s ablkcipher algorithm registration error (%d)\n", pr_err 349 drivers/crypto/ccp/ccp-crypto-aes.c pr_err("%s ablkcipher algorithm registration error (%d)\n", pr_err 212 drivers/crypto/ccp/ccp-crypto-des3.c pr_err("%s ablkcipher algorithm registration error (%d)\n", pr_err 409 drivers/crypto/ccp/ccp-crypto-main.c pr_err("Cannot load: there are no available CCPs\n"); pr_err 265 drivers/crypto/ccp/ccp-crypto-rsa.c pr_err("%s akcipher algorithm registration error (%d)\n", pr_err 450 drivers/crypto/ccp/ccp-crypto-sha.c pr_err("%s ahash algorithm registration error (%d)\n", pr_err 507 drivers/crypto/ccp/ccp-crypto-sha.c pr_err("%s ahash algorithm registration error (%d)\n", pr_err 349 drivers/crypto/chelsio/chcr_algo.c pr_err("Unknown digest size %d\n", digest_size); pr_err 1170 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : %s : Failed to form WR. No memory\n", __func__); pr_err 1206 drivers/crypto/chelsio/chcr_algo.c pr_err("AES: Invalid value of Key Len %d nbytes %d IV Len %d\n", pr_err 1373 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr device assignment fails\n"); pr_err 1410 drivers/crypto/chelsio/chcr_algo.c pr_err("failed to allocate fallback for %s\n", alg->cra_name); pr_err 1430 drivers/crypto/chelsio/chcr_algo.c pr_err("failed to allocate fallback for %s\n", alg->cra_name); pr_err 1476 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : ERROR, unsupported digest size\n"); pr_err 2870 drivers/crypto/chelsio/chcr_algo.c pr_err("CCM: IV check fails\n"); pr_err 2875 drivers/crypto/chelsio/chcr_algo.c pr_err("RFC4309: Invalid AAD length %d\n", pr_err 3374 drivers/crypto/chelsio/chcr_algo.c pr_err("GCM: Invalid key length %d\n", keylen); pr_err 3436 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : Unsupported digest size\n"); pr_err 3455 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : Unsupported cipher key\n"); pr_err 3473 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : Base driver cannot be loaded\n"); pr_err 3491 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : Base driver cannot be loaded\n"); pr_err 3580 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : Unsupported cipher key %d\n", keys.enckeylen); pr_err 3616 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : %s : No crypto device.\n", __func__); pr_err 4345 drivers/crypto/chelsio/chcr_algo.c pr_err("chcr : %s : Algorithm registration failed\n", pr_err 176 drivers/crypto/chelsio/chcr_core.c pr_err("Incorrect request address from the firmware\n"); pr_err 222 drivers/crypto/chelsio/chcr_core.c pr_err("Unsupported opcode\n"); pr_err 154 drivers/crypto/chelsio/chcr_ipsec.c pr_err("GCM: Invalid key length %d\n", keylen); pr_err 1575 drivers/crypto/chelsio/chtls/chtls_cm.c pr_err("can't find conn. for hwtid %u.\n", hwtid); pr_err 1627 drivers/crypto/chelsio/chtls/chtls_cm.c pr_err("can't find conn. for hwtid %u.\n", hwtid); pr_err 1696 drivers/crypto/chelsio/chtls/chtls_cm.c pr_err("can't find conn. for hwtid %u.\n", hwtid); pr_err 2147 drivers/crypto/chelsio/chtls/chtls_cm.c pr_err("can't find conn. for hwtid %u.\n", hwtid); pr_err 229 drivers/crypto/chelsio/chtls/chtls_hw.c pr_err("GCM: Invalid key length %d\n", keylen); pr_err 1488 drivers/crypto/hifn_795x.c pr_err("%s: dlen: %u, nbytes: %u, slen: %u, offset: %u.\n", pr_err 1490 drivers/crypto/hifn_795x.c pr_err("%s: please contact author to fix this " pr_err 2649 drivers/crypto/hifn_795x.c pr_err("hifn795x: invalid hifn_pll_ref clock, must be pci or ext"); pr_err 2661 drivers/crypto/hifn_795x.c pr_err("hifn795x: invalid hifn_pll_ref frequency, must" pr_err 2669 drivers/crypto/hifn_795x.c pr_err("Failed to register PCI driver for %s device.\n", pr_err 150 drivers/crypto/hisilicon/zip/zip_crypto.c pr_err("Failed to find a proper ZIP device!\n"); pr_err 421 drivers/crypto/hisilicon/zip/zip_crypto.c pr_err("request type does not support!\n"); pr_err 590 drivers/crypto/hisilicon/zip/zip_crypto.c pr_err("Zlib acomp algorithm registration failed\n"); pr_err 596 drivers/crypto/hisilicon/zip/zip_crypto.c pr_err("Gzip acomp algorithm registration failed\n"); pr_err 975 drivers/crypto/hisilicon/zip/zip_main.c pr_err("Failed to register pci driver.\n"); pr_err 982 drivers/crypto/hisilicon/zip/zip_main.c pr_err("Failed to register driver to crypto.\n"); pr_err 680 drivers/crypto/img-hash.c pr_err("img_hash: Could not load fallback driver.\n"); pr_err 1121 drivers/crypto/mediatek/mtk-aes.c pr_err("Error allocating ctr(aes)\n"); pr_err 868 drivers/crypto/mediatek/mtk-sha.c pr_err("base driver %s could not be loaded.\n", pr_err 124 drivers/crypto/n2_core.c pr_err("CPU[%d]: Got CWQ interrupt for qhdl[%lx]\n", pr_err 131 drivers/crypto/n2_core.c pr_err("CPU[%d]: CWQ gethead[%lx] hv_ret[%lu]\n", pr_err 154 drivers/crypto/n2_core.c pr_err("CPU[%d]: Got MAU interrupt for qhdl[%lx]\n", pr_err 159 drivers/crypto/n2_core.c pr_err("CPU[%d]: MAU gethead[%lx] hv_ret[%lu]\n", pr_err 498 drivers/crypto/n2_core.c pr_err("Hypervisor error on gethead\n"); pr_err 1401 drivers/crypto/n2_core.c pr_err("%s alg registration failed\n", alg->cra_name); pr_err 1439 drivers/crypto/n2_core.c pr_err("%s alg registration failed\n", base->cra_name); pr_err 1493 drivers/crypto/n2_core.c pr_err("%s alg registration failed\n", base->cra_name); pr_err 168 drivers/crypto/nx/nx-842-powernv.c pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \ pr_err 695 drivers/crypto/nx/nx-842-powernv.c pr_err("ibm,nx-842: Can not open TX window: %ld\n", pr_err 738 drivers/crypto/nx/nx-842-powernv.c pr_err("NX engine is not available for CPU %d\n", i); pr_err 759 drivers/crypto/nx/nx-842-powernv.c pr_err("Missing rx-fifo-address property\n"); pr_err 765 drivers/crypto/nx/nx-842-powernv.c pr_err("Missing rx-fifo-size property\n"); pr_err 771 drivers/crypto/nx/nx-842-powernv.c pr_err("Missing lpid property\n"); pr_err 777 drivers/crypto/nx/nx-842-powernv.c pr_err("Missing pid property\n"); pr_err 783 drivers/crypto/nx/nx-842-powernv.c pr_err("Missing tid property\n"); pr_err 789 drivers/crypto/nx/nx-842-powernv.c pr_err("Missing priority property\n"); pr_err 802 drivers/crypto/nx/nx-842-powernv.c pr_err("Invalid RxFIFO priority value\n"); pr_err 826 drivers/crypto/nx/nx-842-powernv.c pr_err("setting RxFIFO with VAS failed: %d\n", pr_err 861 drivers/crypto/nx/nx-842-powernv.c pr_err("ibm,chip-id missing\n"); pr_err 867 drivers/crypto/nx/nx-842-powernv.c pr_err("Unable to map chip_id %d to vasid\n", chip_id); pr_err 883 drivers/crypto/nx/nx-842-powernv.c pr_err("NX842 FIFO nodes are missing\n"); pr_err 893 drivers/crypto/nx/nx-842-powernv.c pr_err("Failed to initialize NX for chip(%d): %d\n", pr_err 911 drivers/crypto/nx/nx-842-powernv.c pr_err("ibm,chip-id missing\n"); pr_err 916 drivers/crypto/nx/nx-842-powernv.c pr_err("ibm,842-coprocessor-type missing\n"); pr_err 921 drivers/crypto/nx/nx-842-powernv.c pr_err("ibm,842-coprocessor-instance missing\n"); pr_err 938 drivers/crypto/nx/nx-842-powernv.c pr_err("NX842 chip %d, CT %d != first found CT %d\n", pr_err 732 drivers/crypto/nx/nx-842-pseries.c pr_err("%s: device is not available\n", __func__); pr_err 1100 drivers/crypto/nx/nx-842-pseries.c pr_err("Could not register VIO driver %d\n", ret); pr_err 147 drivers/crypto/nx/nx-842.c pr_err("Internal error: no space for header\n"); pr_err 310 drivers/crypto/nx/nx-842.c pr_err("Internal error: No header but multiple groups\n"); pr_err 475 drivers/crypto/nx/nx-842.c pr_err("header has no groups\n"); pr_err 480 drivers/crypto/nx/nx-842.c pr_err("header has too many groups %x, max %x\n", pr_err 127 drivers/crypto/nx/nx.c pr_err("nx: scatter/gather list overflow, pid: %d\n", pr_err 655 drivers/crypto/nx/nx.c pr_err("Attempt to initialize NX crypto context while device " pr_err 185 drivers/crypto/omap-aes-gcm.c pr_err("skcipher: Failed to allocate request\n"); pr_err 214 drivers/crypto/omap-aes-gcm.c pr_err("Encryption of IV failed for GCM mode\n"); pr_err 67 drivers/crypto/omap-crypto.c pr_err("%s: Couldn't allocate pages for unaligned cases.\n", pr_err 178 drivers/crypto/omap-des.c pr_err("omap_des_read(" #offset "=%#x)= %#x\n", \ pr_err 192 drivers/crypto/omap-des.c pr_err("omap_des_write(" #offset "=%#x) value=%#x\n", \ pr_err 634 drivers/crypto/omap-des.c pr_err("request size is not exact amount of DES blocks\n"); pr_err 556 drivers/crypto/omap-sham.c pr_err("sg miter failure.\n"); pr_err 606 drivers/crypto/omap-sham.c pr_err("omap-sham: can't configure dmaengine slave: %d\n", ret); pr_err 710 drivers/crypto/omap-sham.c pr_err("Couldn't allocate pages for unaligned cases.\n"); pr_err 1358 drivers/crypto/omap-sham.c pr_err("omap-sham: fallback driver '%s' " pr_err 1372 drivers/crypto/omap-sham.c pr_err("omap-sham: base driver '%s' " pr_err 295 drivers/crypto/qat/qat_c3xxx/adf_drv.c pr_err("QAT: Driver removal failed\n"); pr_err 311 drivers/crypto/qat/qat_c3xxx/adf_drv.c pr_err("QAT: Driver initialization failed\n"); pr_err 267 drivers/crypto/qat/qat_c3xxxvf/adf_drv.c pr_err("QAT: Driver removal failed\n"); pr_err 282 drivers/crypto/qat/qat_c3xxxvf/adf_drv.c pr_err("QAT: Driver initialization failed\n"); pr_err 295 drivers/crypto/qat/qat_c62x/adf_drv.c pr_err("QAT: Driver removal failed\n"); pr_err 311 drivers/crypto/qat/qat_c62x/adf_drv.c pr_err("QAT: Driver initialization failed\n"); pr_err 267 drivers/crypto/qat/qat_c62xvf/adf_drv.c pr_err("QAT: Driver removal failed\n"); pr_err 282 drivers/crypto/qat/qat_c62xvf/adf_drv.c pr_err("QAT: Driver initialization failed\n"); pr_err 198 drivers/crypto/qat/qat_common/adf_aer.c pr_err("QAT: Can't find acceleration device\n"); pr_err 96 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: unable to allocate chrdev region\n"); pr_err 102 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: class_create failed for adf_ctl\n"); pr_err 108 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: cdev add failed\n"); pr_err 116 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: failed to create device\n"); pr_err 142 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: failed to copy from user cfg_data.\n"); pr_err 313 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: Device %d not found\n", ctl_data->device_id); pr_err 395 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: failed to copy from user.\n"); pr_err 453 drivers/crypto/qat/qat_common/adf_ctl_drv.c pr_err("QAT: Invalid ioctl\n"); pr_err 86 drivers/crypto/qat/qat_common/adf_init.c pr_err("QAT: Could not remove active service\n"); pr_err 131 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: Read CSR timeout\n"); pr_err 147 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: Write CSR Timeout\n"); pr_err 190 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: wait_num_cycles time out\n"); pr_err 205 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: bad ctx mode=%d\n", mode); pr_err 257 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: lmType = 0x%x\n", lm_type); pr_err 406 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: AE%d is inactive!!\n", ae); pr_err 475 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: Fail to init eSram!\n"); pr_err 534 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: failed to get device out of reset\n"); pr_err 666 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: clear GPR of AE %d failed", ae); pr_err 799 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: start error (AE 0x%x FCU_STS = 0x%x)\n", ae, pr_err 889 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: invalid instruction num %d\n", inst_num); pr_err 979 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: bad regaddr=0x%x\n", reg_addr); pr_err 1044 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: bad destAddr=0x%x\n", dest_addr); pr_err 1195 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: bad 4-ctx mode,ctx=0x%x\n", ctx); pr_err 1245 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: 4-ctx mode,ctx=0x%x\n", ctx); pr_err 1256 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr); pr_err 1342 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: write gpr fail\n"); pr_err 1377 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: write wr xfer fail\n"); pr_err 1412 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: write rd xfer fail\n"); pr_err 1435 drivers/crypto/qat/qat_common/qat_hal.c pr_err("QAT: write neigh error\n"); pr_err 104 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: bad argument, ae_data is NULL\n "); pr_err 131 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: Invalid header 0x%x\n", hdr->file_id); pr_err 135 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: bad UOF version, major 0x%x, minor 0x%x\n", pr_err 148 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: invalid header 0x%x\n", suof_hdr->file_id); pr_err 152 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: unsupported firmware type\n"); pr_err 156 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: SUOF chunk amount is incorrect\n"); pr_err 160 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: bad SUOF version, major 0x%x, minor 0x%x\n", pr_err 268 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: initmem is out of range"); pr_err 272 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: Memory scope for init_mem error\n"); pr_err 277 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: AE name assigned in UOF init table is NULL\n"); pr_err 281 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: Parse num for AE number failed\n"); pr_err 285 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: ae %d out of range\n", *ae); pr_err 397 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: initmem region error. region type=0x%x\n", pr_err 462 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: fail to batch init lmem for AE %d\n", ae); pr_err 570 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF can't contain imported variable to be parsed\n"); pr_err 577 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF can't contain shared control store feature\n"); pr_err 581 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF can't contain multiple pages\n"); pr_err 585 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF can't use shared control store feature\n"); pr_err 589 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF can't use reloadable feature\n"); pr_err 705 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: uimage uses AE not set\n"); pr_err 760 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: unsupported device 0x%x\n", pr_err 771 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF type 0x%x doesn't match with platform 0x%x\n", pr_err 779 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF majVer 0x%x out of range\n", maj_ver); pr_err 822 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF uses not supported reg type 0x%x\n", reg_type); pr_err 858 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: invalid ctx num = 0x%x\n", pr_err 871 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: INIT_EXPR feature not supported\n"); pr_err 874 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: INIT_EXPR_ENDIAN_SWAP feature not supported\n"); pr_err 892 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: initialize memory failed\n"); pr_err 930 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: qat_hal_set_ae_ctx_mode error\n"); pr_err 935 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: qat_hal_set_ae_nn_mode error\n"); pr_err 941 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: qat_hal_set_ae_lm_mode LMEM0 error\n"); pr_err 947 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: qat_hal_set_ae_lm_mode LMEM1 error\n"); pr_err 981 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF incompatible\n"); pr_err 992 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: UOF doesn't have effective images\n"); pr_err 1001 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: Bad object\n"); pr_err 1034 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: incorrect SUOF checksum\n"); pr_err 1100 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: incompatible product type %x\n", pr_err 1107 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: incompatible device majver 0x%x\n", maj_ver); pr_err 1150 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: input parameter SUOF pointer/size is NULL\n"); pr_err 1213 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: authentication error (FCU_STATUS = 0x%x),retry = %d\n", pr_err 1270 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: error, input image size overflow %d\n", size); pr_err 1277 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: error, allocate continuous dram fail\n"); pr_err 1383 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: AE %d is active\n", i); pr_err 1398 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: firmware load failed timeout %x\n", retry); pr_err 1416 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: map SUOF failed\n"); pr_err 1434 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: C3XXX doesn't support unsigned MMP\n"); pr_err 1460 drivers/crypto/qat/qat_common/qat_uclo.c pr_err("QAT: object file chunk is null\n"); pr_err 297 drivers/crypto/qat/qat_dh895xcc/adf_drv.c pr_err("QAT: Driver removal failed\n"); pr_err 313 drivers/crypto/qat/qat_dh895xcc/adf_drv.c pr_err("QAT: Driver initialization failed\n"); pr_err 267 drivers/crypto/qat/qat_dh895xccvf/adf_drv.c pr_err("QAT: Driver removal failed\n"); pr_err 282 drivers/crypto/qat/qat_dh895xccvf/adf_drv.c pr_err("QAT: Driver initialization failed\n"); pr_err 1687 drivers/crypto/s5p-sss.c pr_err("fallback alloc fails for '%s'\n", alg_name); pr_err 755 drivers/crypto/sahara.c pr_err("Error allocating fallback algo %s\n", name); pr_err 909 drivers/crypto/ux500/cryp/cryp_core.c pr_err(DEV_DBG_NAME "[%s]: ablkcipher_walk_phys() failed!", pr_err 973 drivers/crypto/ux500/cryp/cryp_core.c pr_err(DEV_DBG_NAME "[%s]: Unknown keylen!", __func__); pr_err 1299 drivers/crypto/ux500/cryp/cryp_core.c pr_err("[%s] alg registration failed", pr_err 1088 drivers/crypto/ux500/hash/hash_core.c pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__); pr_err 1304 drivers/crypto/ux500/hash/hash_core.c pr_err("%s: hash_hw_update() failed!\n", __func__); pr_err 1327 drivers/crypto/ux500/hash/hash_core.c pr_err("%s: hash_hw/dma_final() failed\n", __func__); pr_err 1344 drivers/crypto/ux500/hash/hash_core.c pr_err("%s: Failed to allocate ctx->key for %d\n", pr_err 184 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("virtio_crypto: Create session failed status: %u\n", pr_err 253 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", pr_err 273 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("virtio_crypto: the key is too long\n"); pr_err 319 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("virtio_crypto: Could not find a virtio device in the system or unsupported algo\n"); pr_err 364 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("Invalid number of src SG.\n"); pr_err 408 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("virtio_crypto: The dst_len is beyond U32_MAX\n"); pr_err 419 drivers/crypto/virtio/virtio_crypto_algs.c pr_err("virtio_crypto: The length is too big\n"); pr_err 241 drivers/crypto/virtio/virtio_crypto_mgr.c pr_err("virtio_crypto: Failed to register crypto algs\n"); pr_err 33 drivers/crypto/vmx/aes_cbc.c pr_err("Failed to allocate cbc(aes) fallback: %ld\n", pr_err 32 drivers/crypto/vmx/aes_ctr.c pr_err("Failed to allocate ctr(aes) fallback: %ld\n", pr_err 35 drivers/crypto/vmx/aes_xts.c pr_err("Failed to allocate xts(aes) fallback: %ld\n", pr_err 472 drivers/devfreq/devfreq-event.c pr_err("%s: couldn't create class\n", __FILE__); pr_err 59 drivers/devfreq/devfreq.c pr_err("DEVFREQ: %s: Invalid parameters\n", __func__); pr_err 209 drivers/devfreq/devfreq.c pr_err("DEVFREQ: %s: Invalid parameters\n", __func__); pr_err 240 drivers/devfreq/devfreq.c pr_err("DEVFREQ: %s: Invalid parameters\n", __func__); pr_err 1008 drivers/devfreq/devfreq.c pr_err("%s: Invalid parameters.\n", __func__); pr_err 1015 drivers/devfreq/devfreq.c pr_err("%s: governor %s already registered\n", __func__, pr_err 1073 drivers/devfreq/devfreq.c pr_err("%s: Invalid parameters.\n", __func__); pr_err 1080 drivers/devfreq/devfreq.c pr_err("%s: governor %s not registered\n", __func__, pr_err 1471 drivers/devfreq/devfreq.c pr_err("%s: couldn't create class\n", __FILE__); pr_err 1478 drivers/devfreq/devfreq.c pr_err("%s: couldn't create workqueue\n", __FILE__); pr_err 200 drivers/devfreq/governor_passive.c pr_err("%s: failed remove governor %d\n", __func__, ret); pr_err 56 drivers/devfreq/governor_performance.c pr_err("%s: failed remove governor %d\n", __func__, ret); pr_err 56 drivers/devfreq/governor_powersave.c pr_err("%s: failed remove governor %d\n", __func__, ret); pr_err 136 drivers/devfreq/governor_simpleondemand.c pr_err("%s: failed remove governor %d\n", __func__, ret); pr_err 151 drivers/devfreq/governor_userspace.c pr_err("%s: failed remove governor %d\n", __func__, ret); pr_err 182 drivers/dio/dio.c pr_err("DIO: Error registering dio_bus\n"); pr_err 250 drivers/dio/dio.c pr_err("DIO: Error registering device %s\n", pr_err 107 drivers/dma-buf/selftest.c pr_err("dma-buf/%s: %s failed with error %d\n", pr_err 121 drivers/dma-buf/st-dma-fence.c pr_err("Fence unexpectedly signaled on creation\n"); pr_err 126 drivers/dma-buf/st-dma-fence.c pr_err("Fence reported being already signaled\n"); pr_err 131 drivers/dma-buf/st-dma-fence.c pr_err("Fence not reporting signaled\n"); pr_err 136 drivers/dma-buf/st-dma-fence.c pr_err("Fence reported not being already signaled\n"); pr_err 167 drivers/dma-buf/st-dma-fence.c pr_err("Failed to add callback, fence already signaled!\n"); pr_err 173 drivers/dma-buf/st-dma-fence.c pr_err("Callback failed!\n"); pr_err 196 drivers/dma-buf/st-dma-fence.c pr_err("Added callback, but fence was already signaled!\n"); pr_err 202 drivers/dma-buf/st-dma-fence.c pr_err("Callback called after failed attachment !\n"); pr_err 223 drivers/dma-buf/st-dma-fence.c pr_err("Failed to add callback, fence already signaled!\n"); pr_err 228 drivers/dma-buf/st-dma-fence.c pr_err("Failed to remove callback!\n"); pr_err 234 drivers/dma-buf/st-dma-fence.c pr_err("Callback still signaled after removal!\n"); pr_err 255 drivers/dma-buf/st-dma-fence.c pr_err("Failed to add callback, fence already signaled!\n"); pr_err 261 drivers/dma-buf/st-dma-fence.c pr_err("Callback failed!\n"); pr_err 266 drivers/dma-buf/st-dma-fence.c pr_err("Callback removal succeed after being executed!\n"); pr_err 286 drivers/dma-buf/st-dma-fence.c pr_err("Fence unexpectedly has signaled status on creation\n"); pr_err 292 drivers/dma-buf/st-dma-fence.c pr_err("Fence not reporting signaled status\n"); pr_err 314 drivers/dma-buf/st-dma-fence.c pr_err("Fence unexpectedly has error status before signal\n"); pr_err 320 drivers/dma-buf/st-dma-fence.c pr_err("Fence not reporting error status, got %d\n", pr_err 341 drivers/dma-buf/st-dma-fence.c pr_err("Wait reported complete before being signaled\n"); pr_err 348 drivers/dma-buf/st-dma-fence.c pr_err("Wait reported incomplete after being signaled\n"); pr_err 383 drivers/dma-buf/st-dma-fence.c pr_err("Wait reported complete before being signaled\n"); pr_err 394 drivers/dma-buf/st-dma-fence.c pr_err("Wait reported incomplete after timeout\n"); pr_err 417 drivers/dma-buf/st-dma-fence.c pr_err("Obtained unsignaled stub fence!\n"); pr_err 486 drivers/dma-buf/st-dma-fence.c pr_err("Callback not seen on thread %d, pass %lu (%lu misses), signaling %s add_callback; fence signaled? %s\n", pr_err 607 drivers/dma/amba-pl08x.c pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id); pr_err 333 drivers/dma/dmaengine.c pr_err("initialization failure\n"); pr_err 918 drivers/dma/dmaengine.c pr_err("DMAdevice must have dev\n"); pr_err 628 drivers/dma/dmatest.c pr_err("too many buffers (%d of 255 supported)\n", pr_err 635 drivers/dma/dmatest.c pr_err("%u-byte buffer too small for %d-byte alignment\n", pr_err 676 drivers/dma/dmatest.c pr_err("%u-byte transfer size must be lower than %u-buffer size\n", pr_err 105 drivers/dma/ipu/ipu_irq.c pr_err("IPU: %s(%u) - unmapped!\n", __func__, d->irq); pr_err 128 drivers/dma/ipu/ipu_irq.c pr_err("IPU: %s(%u) - unmapped!\n", __func__, d->irq); pr_err 150 drivers/dma/ipu/ipu_irq.c pr_err("IPU: %s(%u) - unmapped!\n", __func__, d->irq); pr_err 203 drivers/dma/ipu/ipu_irq.c pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq); pr_err 227 drivers/dma/ipu/ipu_irq.c pr_err("IPU: couldn't map source %u: %d\n", source, ret); pr_err 295 drivers/dma/ipu/ipu_irq.c pr_err("IPU: Interrupt on unmapped source %u bank %d\n", pr_err 109 drivers/dma/of-dma.c pr_err("%s: not enough information provided\n", __func__); pr_err 176 drivers/dma/of-dma.c pr_err("%s: not enough information provided\n", __func__); pr_err 245 drivers/dma/of-dma.c pr_err("%s: not enough information provided\n", __func__); pr_err 255 drivers/dma/of-dma.c pr_err("%s: dma-names property of node '%pOF' missing or empty\n", pr_err 876 drivers/dma/ppc4xx/adma.c pr_err("%s: src_cnt=%d, state=%d, addr_count=%d, order=%lld\n", pr_err 879 drivers/dma/ppc4xx/adma.c pr_err("\t[%d] 0x%llx \n", i, srcs[i]); pr_err 976 drivers/dma/ppc4xx/adma.c pr_err("DMA%d err status: 0x%x\n", pr_err 1001 drivers/dma/ppc4xx/adma.c pr_err("XOR ERR 0x%x status\n", rv); pr_err 3938 drivers/dma/ppc4xx/adma.c pr_err("%s: can't find I2O device tree node\n", pr_err 3945 drivers/dma/ppc4xx/adma.c pr_err("%s: failed to map I2O registers\n", __func__); pr_err 4415 drivers/dma/ppc4xx/adma.c pr_err("%s: can't find I2O device tree node\n", pr_err 4427 drivers/dma/ppc4xx/adma.c pr_err("%s: failed to map I2O registers\n", __func__); pr_err 4436 drivers/dma/ppc4xx/adma.c pr_err("%pOF: can't get DCR registers base/len!\n", np); pr_err 4444 drivers/dma/ppc4xx/adma.c pr_err("%pOF: failed to map DCRs!\n", np); pr_err 4459 drivers/dma/ppc4xx/adma.c pr_err("%s: DMA FIFO buffer allocation failed.\n", __func__); pr_err 4495 drivers/dma/ppc4xx/adma.c pr_err("%s: can't find MQ device tree node\n", pr_err 4505 drivers/dma/ppc4xx/adma.c pr_err("%pOF: can't get DCR registers base/len!\n", np); pr_err 4512 drivers/dma/ppc4xx/adma.c pr_err("%pOF: failed to map DCRs!\n", np); pr_err 4570 drivers/dma/ppc4xx/adma.c pr_err("%s: failed to register platform driver\n", pr_err 4600 drivers/dma/ppc4xx/adma.c pr_err("%s: failed to create RAID-6 driver interface\n", pr_err 742 drivers/dma/sirf-dma.c pr_err("sirfsoc DMA Invalid xfer\n"); pr_err 344 drivers/dma/ti/cppi41.c pr_err("%s() q %d desc %08x\n", __func__, pr_err 394 drivers/dma/xgene-dma.c pr_err("Invalid dma descriptor index\n"); pr_err 479 drivers/edac/altera_edac.c pr_err("Suspend not allowed when EDAC is enabled.\n"); pr_err 517 drivers/edac/fsl_ddr_edac.c pr_err("%s: Unable to get resource for MC err regs\n", pr_err 524 drivers/edac/fsl_ddr_edac.c pr_err("%s: Error while requesting mem region\n", pr_err 532 drivers/edac/fsl_ddr_edac.c pr_err("%s: Unable to setup MC err regs\n", __func__); pr_err 594 drivers/edac/fsl_ddr_edac.c pr_err("%s: Unable to request irq %d for FSL DDR DRAM ERR\n", pr_err 53 drivers/edac/layerscape_edac.c pr_err("MC fails to register\n"); pr_err 62 drivers/edac/mpc85xx_edac.c pr_err("PCI error(s) detected\n"); pr_err 63 drivers/edac/mpc85xx_edac.c pr_err("PCI/X ERR_DR register: %#08x\n", err_detect); pr_err 65 drivers/edac/mpc85xx_edac.c pr_err("PCI/X ERR_ATTRIB register: %#08x\n", pr_err 67 drivers/edac/mpc85xx_edac.c pr_err("PCI/X ERR_ADDR register: %#08x\n", pr_err 69 drivers/edac/mpc85xx_edac.c pr_err("PCI/X ERR_EXT_ADDR register: %#08x\n", pr_err 71 drivers/edac/mpc85xx_edac.c pr_err("PCI/X ERR_DL register: %#08x\n", pr_err 73 drivers/edac/mpc85xx_edac.c pr_err("PCI/X ERR_DH register: %#08x\n", pr_err 94 drivers/edac/mpc85xx_edac.c pr_err("PCIe error(s) detected\n"); pr_err 95 drivers/edac/mpc85xx_edac.c pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect); pr_err 96 drivers/edac/mpc85xx_edac.c pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n", err_cap_stat); pr_err 97 drivers/edac/mpc85xx_edac.c pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n", pr_err 99 drivers/edac/mpc85xx_edac.c pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n", pr_err 101 drivers/edac/mpc85xx_edac.c pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n", pr_err 103 drivers/edac/mpc85xx_edac.c pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n", pr_err 201 drivers/edac/mpc85xx_edac.c pr_err("%s: Unable to get resource for PCI err regs\n", __func__); pr_err 210 drivers/edac/mpc85xx_edac.c pr_err("%s: Error while requesting mem region\n", __func__); pr_err 217 drivers/edac/mpc85xx_edac.c pr_err("%s: Unable to setup PCI err regs\n", __func__); pr_err 261 drivers/edac/mpc85xx_edac.c pr_err("%s: Unable to request irq %d for MPC85xx PCI err\n", pr_err 450 drivers/edac/mpc85xx_edac.c pr_err("ECC Error in CPU L2 cache\n"); pr_err 451 drivers/edac/mpc85xx_edac.c pr_err("L2 Error Detect Register: 0x%08x\n", err_detect); pr_err 452 drivers/edac/mpc85xx_edac.c pr_err("L2 Error Capture Data High Register: 0x%08x\n", pr_err 454 drivers/edac/mpc85xx_edac.c pr_err("L2 Error Capture Data Lo Register: 0x%08x\n", pr_err 456 drivers/edac/mpc85xx_edac.c pr_err("L2 Error Syndrome Register: 0x%08x\n", pr_err 458 drivers/edac/mpc85xx_edac.c pr_err("L2 Error Attributes Capture Register: 0x%08x\n", pr_err 460 drivers/edac/mpc85xx_edac.c pr_err("L2 Error Address Capture Register: 0x%08x\n", pr_err 516 drivers/edac/mpc85xx_edac.c pr_err("%s: Unable to get resource for L2 err regs\n", __func__); pr_err 525 drivers/edac/mpc85xx_edac.c pr_err("%s: Error while requesting mem region\n", __func__); pr_err 532 drivers/edac/mpc85xx_edac.c pr_err("%s: Unable to setup L2 err regs\n", __func__); pr_err 564 drivers/edac/mpc85xx_edac.c pr_err("%s: Unable to request irq %d for MPC85xx L2 err\n", pr_err 174 drivers/edac/octeon_edac-l2c.c pr_err("%s: edac_device_add_device() failed\n", __func__); pr_err 108 drivers/edac/octeon_edac-pc.c pr_err("%s: edac_device_add_device() failed\n", __func__); pr_err 78 drivers/edac/octeon_edac-pci.c pr_err("%s: edac_pci_add_device() failed\n", __func__); pr_err 183 drivers/firmware/arm_scmi/bus.c pr_err("unable to allocate SCMI idr slot, err %d\n", ret); pr_err 216 drivers/firmware/arm_scmi/bus.c pr_err("scmi protocol bus register failed (%d)\n", retval); pr_err 365 drivers/firmware/arm_sdei.c pr_err("disabling SDEI firmware interface\n"); pr_err 377 drivers/firmware/arm_sdei.c pr_err("Failed to reset platform: %d\n", err); pr_err 654 drivers/firmware/arm_sdei.c pr_err("Failed to re-register event %u\n", event->event_num); pr_err 667 drivers/firmware/arm_sdei.c pr_err("Failed to re-enable event %u\n", event->event_num); pr_err 710 drivers/firmware/arm_sdei.c pr_err("Failed to unregister event %u: %d\n", pr_err 734 drivers/firmware/arm_sdei.c pr_err("Failed to re-register event %u: %d\n", pr_err 742 drivers/firmware/arm_sdei.c pr_err("Failed to re-enable event %u: %d\n", pr_err 1005 drivers/firmware/arm_sdei.c pr_err("advertised but not implemented in platform firmware\n"); pr_err 1007 drivers/firmware/arm_sdei.c pr_err("Failed to get SDEI version: %d\n", err); pr_err 88 drivers/firmware/broadcom/bcm47xx_nvram.c pr_err("no nvram found\n"); pr_err 95 drivers/firmware/broadcom/bcm47xx_nvram.c pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n"); pr_err 99 drivers/firmware/broadcom/bcm47xx_nvram.c pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", pr_err 151 drivers/firmware/broadcom/bcm47xx_nvram.c pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", pr_err 501 drivers/firmware/broadcom/bcm47xx_sprom.c pr_err("unable to fetch mac address\n"); pr_err 763 drivers/firmware/dmi_scan.c pr_err("dmi: Firmware registration failed.\n"); pr_err 129 drivers/firmware/efi/apple-properties.c pr_err("invalid len in dev_header at %#zx\n", offset); pr_err 138 drivers/firmware/efi/apple-properties.c pr_err("device path parse error %ld at %#zx:\n", pr_err 188 drivers/firmware/efi/apple-properties.c pr_err("cannot map setup_data header\n"); pr_err 203 drivers/firmware/efi/apple-properties.c pr_err("cannot map setup_data payload\n"); pr_err 209 drivers/firmware/efi/apple-properties.c pr_err("unsupported version:\n"); pr_err 214 drivers/firmware/efi/apple-properties.c pr_err("length mismatch, expected %u\n", data_len); pr_err 68 drivers/firmware/efi/arm-init.c pr_err("Could not map screen_info config table\n"); pr_err 107 drivers/firmware/efi/arm-init.c pr_err("System table signature incorrect\n"); pr_err 91 drivers/firmware/efi/arm-runtime.c pr_err("No virtual mapping found for the UEFI System Table\n"); pr_err 120 drivers/firmware/efi/arm-runtime.c pr_err("Failed to remap EFI memory map\n"); pr_err 137 drivers/firmware/efi/arm-runtime.c pr_err("UEFI virtual mapping missing or invalid -- runtime services will not be available\n"); pr_err 46 drivers/firmware/efi/capsule-loader.c pr_err("invalid capsule size\n"); pr_err 56 drivers/firmware/efi/capsule-loader.c pr_err("capsule not supported\n"); pr_err 129 drivers/firmware/efi/capsule-loader.c pr_err("capsule update failed\n"); pr_err 225 drivers/firmware/efi/capsule-loader.c pr_err("capsule upload size exceeded header defined size\n"); pr_err 259 drivers/firmware/efi/capsule-loader.c pr_err("capsule upload not complete\n"); pr_err 346 drivers/firmware/efi/capsule-loader.c pr_err("Unable to register capsule loader device\n"); pr_err 155 drivers/firmware/efi/capsule.c pr_err("Conflicting capsule reset type %d (%d).\n", pr_err 322 drivers/firmware/efi/cper.c pr_err(FW_WARN "valid bits set for fields beyond structure\n"); pr_err 510 drivers/firmware/efi/cper.c pr_err(FW_WARN "error section length is too small\n"); pr_err 283 drivers/firmware/efi/efi.c pr_err("failed to get var size\n"); pr_err 295 drivers/firmware/efi/efi.c pr_err("failed to get var data\n"); pr_err 301 drivers/firmware/efi/efi.c pr_err("failed to load table: %d\n", ret); pr_err 339 drivers/firmware/efi/efi.c pr_err("Creating efi_rts_wq failed, EFI runtime services disabled.\n"); pr_err 347 drivers/firmware/efi/efi.c pr_err("efi: Firmware registration failed.\n"); pr_err 360 drivers/firmware/efi/efi.c pr_err("efi: Sysfs attribute export failed with error %d.\n", pr_err 372 drivers/firmware/efi/efi.c pr_err("efivars: Subsystem registration failed.\n"); pr_err 524 drivers/firmware/efi/efi.c pr_err("Table located above 4GB, disabling EFI.\n"); pr_err 550 drivers/firmware/efi/efi.c pr_err("Could not map UEFI random seed!\n"); pr_err 560 drivers/firmware/efi/efi.c pr_err("Could not map UEFI random seed!\n"); pr_err 576 drivers/firmware/efi/efi.c pr_err("Could not map Properties table!\n"); pr_err 603 drivers/firmware/efi/efi.c pr_err("Could not map UEFI memreserve entry!\n"); pr_err 644 drivers/firmware/efi/efi.c pr_err("Could not map Configuration table!\n"); pr_err 796 drivers/firmware/efi/efi.c pr_err("Can't find '%s' in device tree!\n", pr_err 1075 drivers/firmware/efi/efi.c pr_err("Could not map UEFI random seed!\n"); pr_err 1085 drivers/firmware/efi/efi.c pr_err("Could not map UEFI random seed!\n"); pr_err 32 drivers/firmware/efi/efibc.c pr_err("value is too large (%zu bytes) for '%s' EFI variable\n", size, name); pr_err 38 drivers/firmware/efi/efibc.c pr_err("failed to allocate efivar entry for '%s' EFI variable\n", name); pr_err 54 drivers/firmware/efi/efibc.c pr_err("failed to set %s EFI variable: 0x%x\n", pr_err 92 drivers/firmware/efi/efibc.c pr_err("unable to register reboot notifier\n"); pr_err 665 drivers/firmware/efi/efivars.c pr_err("efivars: Failed to destroy sysfs entries\n"); pr_err 264 drivers/firmware/efi/esrt.c pr_err("EFI memory descriptor is invalid. (esrt: %p max: %p)\n", pr_err 273 drivers/firmware/efi/esrt.c pr_err("ESRT header doesn't fit on single memory map entry. (size: %zu max: %zu)\n", pr_err 280 drivers/firmware/efi/esrt.c pr_err("early_memremap(%p, %zu) failed.\n", (void *)efi.esrt, pr_err 291 drivers/firmware/efi/esrt.c pr_err("Unsupported ESRT version %lld.\n", pr_err 297 drivers/firmware/efi/esrt.c pr_err("ESRT memory map entry can only hold the header. (max: %zu size: %zu)\n", pr_err 310 drivers/firmware/efi/esrt.c pr_err("ESRT says fw_resource_count has very large value %d.\n", pr_err 321 drivers/firmware/efi/esrt.c pr_err("ESRT does not fit on single memory map entry (size: %zu max: %zu)\n", pr_err 352 drivers/firmware/efi/esrt.c pr_err("Unsupported ESRT version %lld.\n", pr_err 359 drivers/firmware/efi/esrt.c pr_err("ESRT entry creation failed with error %d.\n", pr_err 386 drivers/firmware/efi/esrt.c pr_err("memremap(%pa, %zu) failed.\n", &esrt_data, pr_err 393 drivers/firmware/efi/esrt.c pr_err("Firmware table registration failed.\n"); pr_err 400 drivers/firmware/efi/esrt.c pr_err("Sysfs attribute export failed with error %d.\n", pr_err 407 drivers/firmware/efi/esrt.c pr_err("kset creation failed.\n"); pr_err 30 drivers/firmware/efi/memattr.c pr_err("Failed to map EFI Memory Attributes table @ 0x%lx\n", pr_err 152 drivers/firmware/efi/memattr.c pr_err("Failed to map EFI Memory Attributes table @ 0x%lx\n", pr_err 178 drivers/firmware/efi/memattr.c pr_err("Error updating mappings, skipping subsequent md's\n"); pr_err 85 drivers/firmware/efi/memmap.c pr_err("Could not map the memory map!\n"); pr_err 84 drivers/firmware/efi/runtime-wrappers.c pr_err("Failed to queue work to efi_rts_wq.\n"); \ pr_err 245 drivers/firmware/efi/runtime-wrappers.c pr_err("Requested executing invalid EFI Runtime Service.\n"); pr_err 764 drivers/firmware/efi/test/efi_test.c pr_err("efi_test: can't misc_register on minor=%d\n", pr_err 56 drivers/firmware/efi/tpm.c pr_err("Failed to map TPM Event Log table @ 0x%lx\n", pr_err 74 drivers/firmware/efi/tpm.c pr_err("Failed to map TPM Final Event Log table @ 0x%lx\n", pr_err 93 drivers/firmware/efi/tpm.c pr_err(FW_BUG "Failed to parse event in TPM Final Events Log\n"); pr_err 84 drivers/firmware/imx/imx-scu-irq.c pr_err("get irq group %d status failed, ret %d\n", pr_err 118 drivers/firmware/imx/imx-scu-irq.c pr_err("enable irq failed, group %d, mask %d, ret %d\n", pr_err 370 drivers/firmware/psci/psci.c pr_err("MIGRATE_INFO_TYPE returned unknown type (%d)\n", type); pr_err 451 drivers/firmware/psci/psci.c pr_err("Conflicting PSCI version detected.\n"); pr_err 95 drivers/firmware/psci/psci_checker.c pr_err("Unexpected return code %d while trying " pr_err 102 drivers/firmware/psci/psci_checker.c pr_err("Unexpected return code %d while trying " pr_err 108 drivers/firmware/psci/psci_checker.c pr_err("Error occurred (%d) while trying " pr_err 122 drivers/firmware/psci/psci_checker.c pr_err("Error occurred (%d) while trying " pr_err 334 drivers/firmware/psci/psci_checker.c pr_err("Failed to suspend CPU %d: error %d " pr_err 409 drivers/firmware/psci/psci_checker.c pr_err("Failed to create kthread on CPU %d\n", cpu); pr_err 471 drivers/firmware/psci/psci_checker.c pr_err("%d error(s) encountered in hotplug tests\n", ret); pr_err 473 drivers/firmware/psci/psci_checker.c pr_err("Out of memory\n"); pr_err 483 drivers/firmware/psci/psci_checker.c pr_err("%d error(s) encountered in suspend tests\n", ret); pr_err 487 drivers/firmware/psci/psci_checker.c pr_err("Out of memory\n"); pr_err 468 drivers/firmware/stratix10-svc.c pr_err("%s: STATUS_ERROR\n", __func__); pr_err 533 drivers/firmware/stratix10-svc.c pr_err("%s: after SMC call -- res.a0=0x%016x", __func__, pr_err 552 drivers/firmware/tegra/ivc.c pr_err("%s: queue_size (%u) must be %u-byte aligned\n", pr_err 572 drivers/firmware/tegra/ivc.c pr_err("num_frames * frame_size overflows\n"); pr_err 577 drivers/firmware/tegra/ivc.c pr_err("frame size not adequately aligned: %zu\n", frame_size); pr_err 586 drivers/firmware/tegra/ivc.c pr_err("IVC channel start not aligned: %#lx\n", rx); pr_err 591 drivers/firmware/tegra/ivc.c pr_err("IVC channel start not aligned: %#lx\n", tx); pr_err 597 drivers/firmware/tegra/ivc.c pr_err("queue regions overlap: %#lx + %zx > %#lx\n", pr_err 603 drivers/firmware/tegra/ivc.c pr_err("queue regions overlap: %#lx + %zx > %#lx\n", pr_err 3012 drivers/firmware/ti_sci.c pr_err("I need a device pointer\n"); pr_err 3136 drivers/firmware/ti_sci.c pr_err("I need a device pointer\n"); pr_err 172 drivers/fpga/of-fpga-region.c pr_err("firmware-name not allowed in child FPGA region: %pOF", pr_err 386 drivers/gnss/core.c pr_err("failed to allocate device numbers: %d\n", ret); pr_err 393 drivers/gnss/core.c pr_err("failed to create class: %d\n", ret); pr_err 102 drivers/gpio/gpio-f7188x.c pr_err(DRVNAME "I/O address 0x%04x already in use\n", base); pr_err 521 drivers/gpio/gpio-f7188x.c pr_err(DRVNAME "Platform data allocation failed\n"); pr_err 527 drivers/gpio/gpio-f7188x.c pr_err(DRVNAME "Device addition failed\n"); pr_err 95 drivers/gpio/gpio-ge.c pr_err("%pOF: GPIO chip registration failed\n", pdev->dev.of_node); pr_err 336 drivers/gpio/gpio-it87.c pr_err("no device\n"); pr_err 339 drivers/gpio/gpio-it87.c pr_err("Unknown Chip found, Chip %04x Revision %x\n", pr_err 128 drivers/gpio/gpio-loongson.c pr_err("error registering loongson GPIO driver\n"); pr_err 189 drivers/gpio/gpio-lpc18xx.c pr_err("failed to allocate parent irq %u: %d\n", pr_err 251 drivers/gpio/gpio-lpc18xx.c pr_err("unable to add irq domain\n"); pr_err 35 drivers/gpio/gpio-mockup.c #define gpio_mockup_err(...) pr_err(GPIO_MOCKUP_NAME ": " __VA_ARGS__) pr_err 396 drivers/gpio/gpio-mpc8xxx.c pr_err("%pOF: GPIO chip registration failed with status %d\n", pr_err 253 drivers/gpio/gpio-mxc.c pr_err("mxc: invalid configuration for GPIO %d: %x\n", pr_err 581 drivers/gpio/gpio-mxc.c pr_err("mxc: failed to enable gpio clock %d\n", ret); pr_err 481 drivers/gpio/gpio-pxa.c pr_err("%s() unknown irq %d\n", __func__, in_irq); pr_err 100 drivers/gpio/gpio-sch311x.c pr_err(DRV_NAME "I/O address 0x%04x already in use\n", pr_err 386 drivers/gpio/gpio-sch311x.c pr_err("Base address not set\n"); pr_err 413 drivers/gpio/gpio-sch311x.c pr_err(DRV_NAME "Platform data allocation failed\n"); pr_err 419 drivers/gpio/gpio-sch311x.c pr_err(DRV_NAME "Device addition failed\n"); pr_err 202 drivers/gpio/gpio-sta2x11.c pr_err("%s: chip %p, pin %i, cfg %i is invalid\n", pr_err 85 drivers/gpio/gpio-tb10x.c pr_err("Only (both) edge triggered interrupts supported.\n"); pr_err 378 drivers/gpio/gpio-wcove.c pr_err("Failed to read registers: ctrl out/in or irq status/mask\n"); pr_err 579 drivers/gpio/gpio-winbond.c pr_err("please use 'gpios' module parameter to select some active GPIO ports to enable\n"); pr_err 602 drivers/gpio/gpio-winbond.c pr_err("not an our chip\n"); pr_err 625 drivers/gpio/gpio-winbond.c pr_err("some GPIO ports are set both to push-pull and open drain mode at the same time\n"); pr_err 749 drivers/gpio/gpiolib-of.c pr_err("%pOF: GPIO chip registration failed with status %d\n", np, ret); pr_err 826 drivers/gpio/gpiolib-of.c pr_err("%pOF: Group name of numeric GPIO ranges must be the empty string.\n", pr_err 842 drivers/gpio/gpiolib-of.c pr_err("%pOF: Illegal gpio-range format.\n", pr_err 848 drivers/gpio/gpiolib-of.c pr_err("%pOF: GPIO group range requested but no %s property.\n", pr_err 860 drivers/gpio/gpiolib-of.c pr_err("%pOF: Group name of GPIO group range cannot be the empty string.\n", pr_err 201 drivers/gpio/gpiolib.c pr_err("%s: cannot find free range\n", __func__); pr_err 1226 drivers/gpio/gpiolib.c pr_err("%s: unable to get GPIO desc: %ld\n", pr_err 1236 drivers/gpio/gpiolib.c pr_err("%s: unable to hog GPIO line (%s:%u): %d\n", pr_err 1262 drivers/gpio/gpiolib.c pr_err("%s: Failed to initialize gpio device (%d)\n", pr_err 1469 drivers/gpio/gpiolib.c pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__, pr_err 2423 drivers/gpio/gpiolib.c pr_err("missing gpiochip .dev parent pointer\n"); pr_err 4723 drivers/gpio/gpiolib.c pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n", pr_err 4939 drivers/gpio/gpiolib.c pr_err("gpiolib: could not register GPIO bus type\n"); pr_err 4945 drivers/gpio/gpiolib.c pr_err("gpiolib: failed to allocate char dev region\n"); pr_err 144 drivers/gpio/gpiolib.h pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), desc->label ? : "?", \ pr_err 622 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c pr_err("Invalid engine in IB submission: %d\n", engine); pr_err 701 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c pr_err("CP HQD IQ timer status time out\n"); pr_err 715 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c pr_err("CP HQD dequeue request time out\n"); pr_err 733 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c pr_err("cp queue preemption time out.\n"); pr_err 859 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c pr_err("non kfd vmid %d\n", vmid); pr_err 920 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c pr_err("trying to set page table base for wrong VMID %u\n", pr_err 601 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c pr_err("CP HQD IQ timer status time out\n"); pr_err 615 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c pr_err("CP HQD dequeue request time out\n"); pr_err 632 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c pr_err("cp queue preemption time out\n"); pr_err 797 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c pr_err("trying to set page table base for wrong VMID\n"); pr_err 834 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c pr_err("non kfd vmid\n"); pr_err 597 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c pr_err("CP HQD IQ timer status time out\n"); pr_err 611 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c pr_err("CP HQD dequeue request time out\n"); pr_err 628 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c pr_err("cp queue preemption time out.\n"); pr_err 756 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c pr_err("trying to set page table base for wrong VMID\n"); pr_err 793 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c pr_err("non kfd vmid %d\n", vmid); pr_err 571 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c pr_err("cp queue preemption time out.\n"); pr_err 709 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c pr_err("non kfd vmid %d\n", vmid); pr_err 795 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c pr_err("trying to set page table base for wrong VMID %u\n", pr_err 323 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("amdgpu: failed to validate PT BOs\n"); pr_err 329 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("amdgpu: failed to validate PD\n"); pr_err 338 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("amdgpu: failed to kmap PD, ret=%d\n", ret); pr_err 383 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Invalid VA when adding BO to VM\n"); pr_err 401 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to add BO object to VM. ret == %d\n", pr_err 418 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("validate_pt_pd_bos() failed\n"); pr_err 496 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to set userptr: %d\n", __func__, ret); pr_err 502 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to register MMU notifier: %d\n", pr_err 509 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to get user pages: %d\n", __func__, ret); pr_err 515 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to reserve BO\n", __func__); pr_err 521 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: failed to validate BO\n", __func__); pr_err 593 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to reserve buffers in ttm\n"); pr_err 666 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to reserve buffers in ttm.\n"); pr_err 732 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("amdgpu_vm_bo_update failed\n"); pr_err 750 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to map VA 0x%llx in vm. ret %d\n", pr_err 760 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("update_gpuvm_pte() failed\n"); pr_err 861 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to create eviction fence\n"); pr_err 883 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("validate_pt_pd_bos() failed\n"); pr_err 941 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed init vm ret %d\n", ret); pr_err 1315 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Invalid BO when mapping memory to GPU\n"); pr_err 1397 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to map bo to gpuvm\n"); pr_err 1403 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to update page directories\n"); pr_err 1478 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("failed to unmap VA 0x%llx\n", pr_err 1528 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("userptr can't be mapped to kernel\n"); pr_err 1539 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to reserve bo. ret %d\n", ret); pr_err 1545 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to pin bo. ret %d\n", ret); pr_err 1551 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to map bo to kernel. ret %d\n", ret); pr_err 1670 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to quiesce KFD\n"); pr_err 1709 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to invalidate userptr BO\n", pr_err 1778 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to allocate PD BO list entries\n", __func__); pr_err 1826 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: failed to validate BO\n", __func__); pr_err 1848 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: update PTE failed\n", __func__); pr_err 1925 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("%s: Failed to resume KFD\n", __func__); pr_err 2068 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Failed to create eviction fence\n"); pr_err 2124 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Reserve gws bo failed %d\n", ret); pr_err 2130 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("GWS BO validate failed %d\n", ret); pr_err 2174 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c pr_err("Reserve gws bo failed %d\n", ret); pr_err 151 drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c pr_err("failed to allocate framebuffer (%d)\n", aligned_size); pr_err 379 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c pr_err("Currently not in any profile mode!\n"); pr_err 2762 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c pr_err("smu firmware loading failed\n"); pr_err 509 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c pr_err("Failed to find GTT space for blit from VRAM\n"); pr_err 568 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c pr_err("Failed to find GTT space for blit to VRAM\n"); pr_err 677 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c pr_err("Move buffer fallback to memcpy unavailable\n"); pr_err 860 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c pr_err("Page fault failed for pfn[%lu] = 0x%llx\n", pr_err 90 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c pr_err("failed to read reg:%x\n", reg); pr_err 137 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c pr_err("failed to write reg:%x\n", reg); pr_err 177 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c pr_err("failed to write reg %x wait reg %x\n", reg0, reg1); pr_err 150 drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c pr_err("xGMI error counters not enabled!\n"); pr_err 182 drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c pr_err("failed to create xgmi_error\n"); pr_err 147 drivers/gpu/drm/amd/amdgpu/cik_sdma.c pr_err("cik_sdma: Failed to load firmware \"%s\"\n", fw_name); pr_err 3796 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c pr_err("SMC firmware status is not correct\n"); pr_err 384 drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c pr_err("gfx6: Failed to load firmware \"%s\"\n", fw_name); pr_err 979 drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c pr_err("gfx7: Failed to load firmware \"%s\"\n", fw_name); pr_err 4954 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c pr_err("cp is busy, skip halt cp\n"); pr_err 4958 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c pr_err("rlc is busy, skip halt rlc\n"); pr_err 166 drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c pr_err("cik_mc: Failed to load firmware \"%s\"\n", fw_name); pr_err 283 drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c pr_err("mc: Failed to load firmware \"%s\"\n", fw_name); pr_err 94 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c pr_err("Doesn't get TRN_MSG_ACK from pf in %d msec\n", AI_MAILBOX_POLL_ACK_TIMEDOUT); pr_err 112 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c pr_err("Doesn't get msg:%d from pf, error=%d\n", event, r); pr_err 133 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c pr_err("trn=%x ACK should not assert! wait again !\n", trn); pr_err 156 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c pr_err("Doesn't get ack from pf, continue\n"); pr_err 250 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c pr_err("Doesn't get READY_TO_ACCESS_GPU from pf, give up\n"); pr_err 331 drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c pr_err("RCV_MSG_VALID is not cleared\n"); pr_err 396 drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c pr_err("Doesn't get ack from pf.\n"); pr_err 416 drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c pr_err("Doesn't get ack from pf.\n"); pr_err 449 drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c pr_err("Doesn't get ack from pf, give up\n"); pr_err 518 drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c pr_err("failed to receive FLR_CMPL\n"); pr_err 178 drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c pr_err("sdma_v2_4: Failed to load firmware \"%s\"\n", fw_name); pr_err 334 drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c pr_err("sdma_v3_0: Failed to load firmware \"%s\"\n", fw_name); pr_err 92 drivers/gpu/drm/amd/amdgpu/soc15_common.h pr_err("timeout: rlcg program reg:0x%05x failed !\n", reg); \ pr_err 151 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n"); pr_err 156 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n"); pr_err 163 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Can't access ring base address\n"); pr_err 168 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Ring size must be a power of 2 or 0\n"); pr_err 174 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Can't access read pointer\n"); pr_err 180 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Can't access write pointer\n"); pr_err 355 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n"); pr_err 360 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n"); pr_err 367 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Can't access ring base address\n"); pr_err 372 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Ring size must be a power of 2 or 0\n"); pr_err 1015 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Event page is already set\n"); pr_err 1021 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Getting device by id failed in %s\n", __func__); pr_err 1035 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Can't find BO, offset is 0x%llx\n", pr_err 1045 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Failed to map event page to kernel\n"); pr_err 1051 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Failed to set event page\n"); pr_err 1269 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Alloc host visible vram on small bar is not allowed\n"); pr_err 1346 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Process device data doesn't exist\n"); pr_err 1442 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Failed to map to gpu %d/%d\n", pr_err 1549 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c pr_err("Failed to unmap from gpu %d/%d\n", pr_err 766 drivers/gpu/drm/amd/amdkfd/kfd_crat.c pr_err("CRAT table error: %s\n", err); pr_err 1375 drivers/gpu/drm/amd/amdkfd/kfd_crat.c pr_err("VCRAT not implemented for APU\n"); pr_err 79 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("acquire_packet_buffer failed\n"); pr_err 117 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to allocate GART memory\n"); pr_err 191 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to create DIQ\n"); pr_err 200 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Error getting DIQ\n"); pr_err 282 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to get pdd for wave control no DIQ\n"); pr_err 292 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("num_watch_points is invalid\n"); pr_err 297 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("adw_info fields are not valid\n"); pr_err 357 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("num_watch_points is invalid\n"); pr_err 362 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("adw_info fields are not valid\n"); pr_err 369 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to allocate GART memory\n"); pr_err 476 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to submit IB to DIQ\n"); pr_err 600 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to set wave control registers\n"); pr_err 640 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to allocate GART memory\n"); pr_err 690 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to submit IB to DIQ\n"); pr_err 711 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to get pdd for wave control no DIQ\n"); pr_err 717 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Failed to set wave control registers\n"); pr_err 797 drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c pr_err("Didn't find vmid for pasid %d\n", p->pasid); pr_err 73 drivers/gpu/drm/amd/amdkfd/kfd_dbgmgr.c pr_err("Failed to allocate dbgmgr instance\n"); pr_err 81 drivers/gpu/drm/amd/amdkfd/kfd_dbgmgr.c pr_err("Failed to allocate dbgdev instance\n"); pr_err 47 drivers/gpu/drm/amd/amdkfd/kfd_debugfs.c pr_err("Invalid input for gpu id.\n"); pr_err 55 drivers/gpu/drm/amd/amdkfd/kfd_debugfs.c pr_err("Invalid input for gpu id.\n"); pr_err 63 drivers/gpu/drm/amd/amdkfd/kfd_debugfs.c pr_err("Cannot find device %d.\n", gpu_id); pr_err 1177 drivers/gpu/drm/amd/amdkfd/kfd_device.c pr_err("HWS is not enabled"); pr_err 256 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("Failed to flush TC\n"); pr_err 520 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("unmap queue failed\n"); pr_err 531 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("destroy mqd failed\n"); pr_err 995 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("Invalid queue enabled by amdgpu: %d\n", i); pr_err 1229 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("qcm fence wait loop timeout expired\n"); pr_err 1273 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("failed to execute runlist\n"); pr_err 1330 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("The cp might be in an unrecoverable state due to an unsuccessful queues preemption\n"); pr_err 1657 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("mqd manager [%d] initialization failed\n", i); pr_err 1762 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("Invalid scheduling policy %d\n", dqm->sched_policy); pr_err 1808 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c pr_err("Failed to allocate hiq sdma mqd trunk buffer\n"); pr_err 791 drivers/gpu/drm/amd/amdkfd/kfd_events.c pr_err("Event page mmap requested illegal size\n"); pr_err 379 drivers/gpu/drm/amd/amdkfd/kfd_flat_memory.c pr_err("Failed to create process device data\n"); pr_err 119 drivers/gpu/drm/amd/amdkfd/kfd_iommu.c pr_err("Binding PDD_BOUND_SUSPENDED pdd is unexpected!\n"); pr_err 238 drivers/gpu/drm/amd/amdkfd/kfd_iommu.c pr_err("Unexpected pasid %d binding failure\n", pr_err 67 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Invalid queue type %d\n", type); pr_err 77 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Failed to initialize doorbell"); pr_err 83 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Failed to init pq queues size %d\n", queue_size); pr_err 348 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Failed to init kernel queue\n"); pr_err 368 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Starting kernel queue test\n"); pr_err 372 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err(" Failed to initialize HIQ\n"); pr_err 373 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Kernel queue test failed\n"); pr_err 379 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err(" Failed to acquire packet buffer\n"); pr_err 380 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Kernel queue test failed\n"); pr_err 387 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c pr_err("Ending kernel queue test\n"); pr_err 35 drivers/gpu/drm/amd/amdkfd/kfd_module.c pr_err("sched_policy has invalid value\n"); pr_err 43 drivers/gpu/drm/amd/amdkfd/kfd_module.c pr_err("max_num_of_queues_per_device must be between 1 to KFD_MAX_NUM_OF_QUEUES_PER_DEVICE\n"); pr_err 104 drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c pr_err("Failed to allocate runlist IB\n"); pr_err 284 drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c pr_err("Failed to allocate buffer on kernel queue\n"); pr_err 357 drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c pr_err("Failed to allocate buffer on kernel queue\n"); pr_err 386 drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c pr_err("Failed to allocate buffer on kernel queue\n"); pr_err 444 drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c pr_err("Failed to allocate buffer on kernel queue\n"); pr_err 87 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Invalid attribute"); pr_err 572 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failure to set tba address. error %d.\n", err); pr_err 737 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to init doorbell for process\n"); pr_err 794 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to create process VM object\n"); pr_err 836 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Process device data doesn't exist\n"); pr_err 956 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to evict process queues\n"); pr_err 973 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to restore queues\n"); pr_err 991 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to restore process queues\n"); pr_err 1034 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to evict queues of pasid %d\n", p->pasid); pr_err 1077 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to restore queues of pasid %d\n", p->pasid); pr_err 1091 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Failed to suspend process %d\n", p->pasid); pr_err 1107 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Restore process %d failed during resume\n", pr_err 1123 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Incorrect CWSR mapping size.\n"); pr_err 1135 drivers/gpu/drm/amd/amdkfd/kfd_process.c pr_err("Error allocating per process CWSR buffer.\n"); pr_err 89 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Queue id does not match any known queue\n"); pr_err 100 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Process device data doesn't exist\n"); pr_err 210 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Process device data doesn't exist\n"); pr_err 301 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Pasid %d DQM create queue %d failed. ret %d\n", pr_err 351 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Queue id does not match any known queue\n"); pr_err 365 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Process device data doesn't exist\n"); pr_err 380 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c pr_err("Pasid %d destroy queue %d failed, ret %d\n", pr_err 198 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("No memory to allocate a topology device"); pr_err 1005 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("Error creating VCRAT table for CPU\n"); pr_err 1013 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("Error parsing VCRAT table for CPU\n"); pr_err 1035 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("Failed to update topology in sysfs ret=%d\n", ret); pr_err 1222 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("Error creating VCRAT for GPU (ID: 0x%x)\n", pr_err 1230 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("Error parsing VCRAT for GPU (ID: 0x%x)\n", pr_err 1248 drivers/gpu/drm/amd/amdkfd/kfd_topology.c pr_err("Failed to update GPU (ID: 0x%x) to sysfs topology. res=%d\n", pr_err 85 drivers/gpu/drm/amd/include/amd_pcie_helpers.h pr_err("No valid PCIE lane width reported\n"); pr_err 129 drivers/gpu/drm/amd/include/amd_pcie_helpers.h pr_err("Cannot find a valid PCIE lane width!\n"); pr_err 127 drivers/gpu/drm/amd/powerplay/amd_powerplay.c pr_err("powerplay hw init failed\n"); pr_err 283 drivers/gpu/drm/amd/powerplay/amd_powerplay.c pr_err("fw load failed\n"); pr_err 519 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("pp table size not matched !\n"); pr_err 789 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to init smu_initialize_pptable!\n"); pr_err 799 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to init smc tables!\n"); pr_err 809 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to init smu_init_power!\n"); pr_err 822 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to smu_fini_smc_tables!\n"); pr_err 875 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to load smu firmware!\n"); pr_err 881 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to sw init smc table!\n"); pr_err 887 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to register smc irq handler!\n"); pr_err 905 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to sw fini smc table!\n"); pr_err 911 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to init smu_fini_power!\n"); pr_err 1018 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("[%s] Attempt to override pcie params failed!\n", __func__); pr_err 1246 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("SMC firmware status is not correct\n"); pr_err 1486 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Error in smu_get_clock_info\n"); pr_err 1621 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to change display config!"); pr_err 1628 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to apply clocks adjust rules!"); pr_err 1635 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to notify smc display config!"); pr_err 1645 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c pr_err("Failed to set performance level!"); pr_err 365 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] failed to get dpm levels!\n", __func__); pr_err 371 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] number of clk levels is invalid!\n", __func__); pr_err 381 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] failed to get dpm freq by index!\n", __func__); pr_err 386 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] clk value is invalid!\n", __func__); pr_err 419 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] failed to get socclk dpm levels!\n", __func__); pr_err 434 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[SetupDefaultDpmTable] failed to get gfxclk dpm levels!"); pr_err 449 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[SetupDefaultDpmTable] failed to get memclk dpm levels!"); pr_err 464 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[SetupDefaultDpmTable] failed to get fclk dpm levels!"); pr_err 602 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get current gfx clk Failed!"); pr_err 609 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get gfx clk levels Failed!"); pr_err 624 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get current mclk Failed!"); pr_err 631 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get memory clk levels Failed!"); pr_err 646 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get current socclk Failed!"); pr_err 653 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get socclk levels Failed!"); pr_err 668 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get current fclk Failed!"); pr_err 675 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Attempt to get fclk levels Failed!"); pr_err 712 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to set soft %s gfxclk !\n", pr_err 727 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to set soft %s memclk !\n", pr_err 742 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to set soft %s socclk !\n", pr_err 771 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 784 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 790 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 798 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 811 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 817 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 825 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 838 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 844 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 852 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 865 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 871 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 954 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Invalid sensor for retrieving clock activity\n"); pr_err 1006 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Invalid sensor for retrieving temp\n"); pr_err 1166 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] DPM Table has no entry!", __func__); pr_err 1170 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] DPM Table has too many entries!", __func__); pr_err 1227 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload boot level to %s!\n", pr_err 1234 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload dpm max level to %s!\n!", pr_err 1275 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload DPM Bootup Levels!"); pr_err 1281 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Failed to upload DPM Max Levels!"); pr_err 1352 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("[%s] get PPT limit failed!", __func__); pr_err 1359 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Cannot get PPT limit due to pptable missing!"); pr_err 1433 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Invalid power profile mode %d\n", profile_mode); pr_err 1443 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Unsupported power profile mode %d on arcturus\n", profile_mode); pr_err 1451 drivers/gpu/drm/amd/powerplay/arcturus_ppt.c pr_err("Fail to set workload type %d\n", workload_type); pr_err 148 drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c pr_err("Invalid VramInfo table."); pr_err 151 drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c pr_err("Invalid VramInfo table."); pr_err 725 drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c pr_err("DPM Level not supported\n"); pr_err 526 drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c pr_err("Number of Pcie Entries exceed the number of SCLK Dpm Levels! Disregarding the excess entries...\n"); pr_err 565 drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c pr_err("Number of Pcie Entries exceed the number of SCLK Dpm Levels! Disregarding the excess entries...\n"); pr_err 144 drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c pr_err("Can not allocate memory!\n"); pr_err 506 drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c pr_err("smu10_initialize_dpm_defaults failed\n"); pr_err 514 drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c pr_err("smu10_get_system_info_data failed\n"); pr_err 1292 drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c pr_err("Invalid power profile mode %ld\n", input[size]); pr_err 1166 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c pr_err("Failed to enable Sclk DPM and Mclk DPM!"); pr_err 1251 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c pr_err("Unknown throttling event sources."); pr_err 1806 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c pr_err("Voltage value looks like a Leakage ID but it's not patched \n"); pr_err 2258 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c pr_err("Voltage value looks like a Leakage ID but it's not patched \n"); pr_err 1147 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c pr_err("Failed to set Default Power Limit in SMC!"); pr_err 281 drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c pr_err("Can not allocate memory!\n"); pr_err 321 drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c pr_err("Could not retrieve the Integrated System Info Table!\n"); pr_err 326 drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c pr_err("Unsupported IGP table: %d %d\n", frev, crev); pr_err 353 drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c pr_err("The htcTmpLmt should be larger than htcHystLmt.\n"); pr_err 1093 drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c pr_err("smu8_initialize_dpm_defaults failed\n"); pr_err 1099 drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c pr_err("smu8_get_system_info_data failed\n"); pr_err 116 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_err("Invalid Hardware Manager!"); pr_err 146 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_err("Invalid Hardware Manager!"); pr_err 503 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_err("Can not allocate space for vddc_dep_on_dal_pwrl! \n"); pr_err 564 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c pr_err("DAL requested level can not" pr_err 1339 drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c pr_err("Invalid index for retrieving clock activity\n"); pr_err 1934 drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 1961 drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 498 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Failed to apply vega20 baco workaround!\n"); pr_err 2150 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Invalid index for retrieving clock activity\n"); pr_err 2519 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 2546 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 2574 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 2602 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 2629 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 3994 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c pr_err("Invalid power profile mode %d\n", power_profile_mode); pr_err 982 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("Invalid sensor for retrieving clock activity\n"); pr_err 1080 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("[%s] Failed to get activity monitor!", __func__); pr_err 1141 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("Invalid power profile mode %d\n", smu->power_profile_mode); pr_err 1153 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("[%s] Failed to get activity monitor!", __func__); pr_err 1197 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("[%s] Failed to set activity monitor!", __func__); pr_err 1272 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("Attempt to set divider for DCEFCLK Failed!"); pr_err 1284 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("[%s] Set hard min uclk failed!", __func__); pr_err 1380 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("Invalid sensor for retrieving temp\n"); pr_err 1572 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("[%s] get PPT limit failed!", __func__); pr_err 1579 drivers/gpu/drm/amd/powerplay/navi10_ppt.c pr_err("Cannot get PPT limit due to pptable missing!"); pr_err 109 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("failed send message: %10s (%d) response %#x\n", pr_err 130 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("failed send message: %10s (%d) \tparam: 0x%08x response %#x\n", pr_err 141 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("failed send message: %10s (%d) \tparam: 0x%08x response %#x\n", pr_err 291 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("smu unsupported asic type:%d.\n", smu->adev->asic_type); pr_err 536 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("unknown atom_firmware_info version! for smu11\n"); pr_err 798 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("SMU11 attempt to set divider for DCEFCLK Failed!"); pr_err 962 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[GetMaxSustainableClock] Failed to get max DC clock from SMC!"); pr_err 977 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[GetMaxSustainableClock] failed to get max AC clock from SMC!"); pr_err 1011 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] failed to get max UCLK from SMC!", pr_err 1022 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] failed to get max SOCCLK from SMC!", pr_err 1033 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] failed to get max DCEFCLK from SMC!", pr_err 1042 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] failed to get max DISPCLK from SMC!", pr_err 1050 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] failed to get max PHYCLK from SMC!", pr_err 1058 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] failed to get max PIXCLK from SMC!", pr_err 1075 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("New power limit is over the max allowed %d\n", pr_err 1084 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("Setting new power limit is not supported!\n"); pr_err 1090 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s] Set power limit Failed!\n", __func__); pr_err 1401 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s]%s smc FAN CONTROL feature failed!", pr_err 1472 drivers/gpu/drm/amd/powerplay/smu_v11_0.c pr_err("[%s]Set fan control mode failed!", __func__); pr_err 98 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_err("Failed to send message 0x%x, response 0x%x\n", index, pr_err 118 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_err("Failed to send message 0x%x, response 0x%x, param 0x%x\n", pr_err 129 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_err("Failed to send message 0x%x, response 0x%x param 0x%x\n", pr_err 335 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_err("Attempt to get max GX frequency from SMC Failed !\n"); pr_err 360 drivers/gpu/drm/amd/powerplay/smu_v12_0.c pr_err("Attempt to get min GX frequency from SMC Failed !\n"); pr_err 99 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("smc_addr invalid \n"); pr_err 119 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("smc_start_address invalid \n"); pr_err 420 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("vdd_dep_on_sclk table is NULL\n"); pr_err 683 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("Attempt to get pm_fuse_table_offset Failed!\n"); pr_err 1700 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("VBIOS did not find boot engine clock value in dependency table. Using Graphics DPM level 0!\n"); pr_err 1710 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!\n"); pr_err 2327 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("SMC address is beyond the SMC RAM area.\n"); pr_err 2342 drivers/gpu/drm/amd/powerplay/smumgr/ci_smumgr.c pr_err("SMC size must be divisible by 4\n"); pr_err 197 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_err("[ powerplay ] SMC ucode is not 4 bytes aligned\n"); pr_err 202 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_err("[ powerplay ] SMC address is beyond the SMC RAM area\n"); pr_err 1663 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_err("VBIOS did not find boot engine clock value in dependency table. Using Graphics DPM level 0!\n"); pr_err 1673 drivers/gpu/drm/amd/powerplay/smumgr/iceland_smumgr.c pr_err("VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!\n"); pr_err 187 drivers/gpu/drm/amd/powerplay/smumgr/smu10_smumgr.c pr_err("Attempt to read SMC IF Version Number Failed!\n"); pr_err 435 drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c pr_err("SMU load firmware failed\n"); pr_err 82 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("%s(0x%04x) aborted; SMU still servicing msg (0x%04x)\n", pr_err 116 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("SMC address must be 4 byte aligned\n"); pr_err 121 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("SMC address beyond the SMC RAM area\n"); pr_err 167 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("SMU check loaded firmware failed.\n"); pr_err 347 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Invalid Firmware Type\n"); pr_err 384 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Invalid Firmware Type\n"); pr_err 710 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("SMU firmware load failed\n"); pr_err 716 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Mec Firmware load failed\n"); pr_err 790 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Error when Populate Firmware Entry.\n"); pr_err 798 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Error when Populate Firmware Entry.\n"); pr_err 805 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Error when Populate Firmware Entry.\n"); pr_err 813 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Error when Populate Firmware Entry.\n"); pr_err 821 drivers/gpu/drm/amd/powerplay/smumgr/smu8_smumgr.c pr_err("Error when Populate Firmware Entry.\n"); pr_err 70 drivers/gpu/drm/amd/powerplay/smumgr/smu9_smumgr.c pr_err("No response from smu\n"); pr_err 110 drivers/gpu/drm/amd/powerplay/smumgr/smu9_smumgr.c pr_err("Failed to send message: 0x%x, ret value: 0x%x\n", msg, ret); pr_err 138 drivers/gpu/drm/amd/powerplay/smumgr/smu9_smumgr.c pr_err("Failed message: 0x%x, input parameter: 0x%x, error code: 0x%x\n", msg, parameter, ret); pr_err 144 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_err("SMU Firmware start failed\n"); pr_err 746 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_err("Pcie Dpm Enablemask is 0 !"); pr_err 1539 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_err("[powerplay] VBIOS did not find boot engine " pr_err 1551 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_err("[powerplay] VBIOS did not find boot " pr_err 1761 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_err("VDDC and VDDGFX should " pr_err 1774 drivers/gpu/drm/amd/powerplay/smumgr/tonga_smumgr.c pr_err("VDDC should be on " pr_err 167 drivers/gpu/drm/amd/powerplay/smumgr/vega10_smumgr.c pr_err("Your firmware(0x%x) doesn't match SMU9_DRIVER_IF_VERSION(0x%x). Please update your firmware!\n", pr_err 116 drivers/gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c pr_err("Failed to send message 0x%x, response 0x%x\n", msg, ret); pr_err 144 drivers/gpu/drm/amd/powerplay/smumgr/vega20_smumgr.c pr_err("Failed to send message 0x%x, response 0x%x\n", msg, ret); pr_err 571 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Unsupported PPTable format!"); pr_err 576 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Invalid PowerPlay Table!"); pr_err 672 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[GetNumOfDpmLevel] failed to get dpm levels!"); pr_err 678 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[GetNumOfDpmLevel] number of clk levels is invalid!"); pr_err 689 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[GetDpmFreqByIndex] failed to get dpm freq by index!"); pr_err 694 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[GetDpmFreqByIndex] clk value is invalid!"); pr_err 728 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get socclk dpm levels!"); pr_err 744 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get gfxclk dpm levels!"); pr_err 760 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get memclk dpm levels!"); pr_err 775 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get eclk dpm levels!"); pr_err 790 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get vclk dpm levels!"); pr_err 805 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get dclk dpm levels!"); pr_err 821 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get dcefclk dpm levels!"); pr_err 837 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get pixclk dpm levels!"); pr_err 852 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get dispclk dpm levels!"); pr_err 867 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get phyclk dpm levels!"); pr_err 882 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[SetupDefaultDpmTable] failed to get fclk dpm levels!"); pr_err 964 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get current gfx clk Failed!"); pr_err 971 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get gfx clk levels Failed!"); pr_err 985 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get current mclk Failed!"); pr_err 992 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get memory clk levels Failed!"); pr_err 1006 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get current socclk Failed!"); pr_err 1013 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get socclk levels Failed!"); pr_err 1027 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get current fclk Failed!"); pr_err 1042 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get current dcefclk Failed!"); pr_err 1049 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get dcefclk levels Failed!"); pr_err 1140 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get memory clk levels Failed!"); pr_err 1202 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set soft %s gfxclk !\n", pr_err 1217 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set soft %s memclk !\n", pr_err 1232 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set soft %s socclk !\n", pr_err 1247 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set soft %s fclk !\n", pr_err 1262 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set hard min dcefclk !\n"); pr_err 1297 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 1310 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 1316 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 1324 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 1337 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 1343 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 1351 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 1364 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 1370 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 1378 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 1391 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 1397 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload dpm max level to highest!\n"); pr_err 1406 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Clock level specified %d is over max allowed %d\n", pr_err 1417 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload boot level to lowest!\n"); pr_err 1431 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set min link dpm level!\n"); pr_err 1491 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[GetBaseVoltage] failed to get GFXCLK AVFS voltage from SMU!"); pr_err 1521 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Retrieve board OD limits failed!\n"); pr_err 1730 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to export over drive table!\n"); pr_err 1742 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to import over drive table!\n"); pr_err 1829 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Failed to get activity monitor!", __func__); pr_err 1906 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Invalid power profile mode %d\n", smu->power_profile_mode); pr_err 1915 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Failed to get activity monitor!", __func__); pr_err 1970 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Failed to set activity monitor!", __func__); pr_err 2040 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Dpm table has no entry!", __func__); pr_err 2045 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Dpm table has too many entries!", __func__); pr_err 2054 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Set hard min uclk failed!", __func__); pr_err 2074 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to set uclk to highest dpm level"); pr_err 2086 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to update WMTABLE!"); pr_err 2272 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to set divider for DCEFCLK Failed!"); pr_err 2287 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] Set hard min uclk failed!", __func__); pr_err 2316 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] DPM Table does not exist!", __func__); pr_err 2320 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] DPM Table has no entry!", __func__); pr_err 2324 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[%s] DPM Table has too many entries!", __func__); pr_err 2376 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload boot level to %s!\n", pr_err 2383 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload dpm max level to %s!\n!", pr_err 2421 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload DPM Bootup Levels!"); pr_err 2427 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to upload DPM Max Levels!"); pr_err 2521 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to export over drive table!\n"); pr_err 2532 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to import over drive table!\n"); pr_err 2587 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[Setoverdrive] failed to set od clk!\n"); pr_err 2595 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[Setoverdrive] failed to refresh dpm table!\n"); pr_err 2688 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get memory clk levels Failed!"); pr_err 2795 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to export over drive table!\n"); pr_err 2804 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Failed to import over drive table!\n"); pr_err 2817 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("[Setoverdrive] failed to refresh dpm table!\n"); pr_err 2895 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Attempt to get current RPM from SMC Failed!\n"); pr_err 2969 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Invalid sensor for retrieving clock activity\n"); pr_err 3012 drivers/gpu/drm/amd/powerplay/vega20_ppt.c pr_err("Invalid sensor for retrieving temp\n"); pr_err 471 drivers/gpu/drm/bridge/ti-tfp410.c pr_err("%s: registering i2c driver failed: %d", pr_err 479 drivers/gpu/drm/bridge/ti-tfp410.c pr_err("%s: registering platform driver failed: %d", pr_err 91 drivers/gpu/drm/drm_cache.c pr_err("Timed out waiting for cache flush\n"); pr_err 108 drivers/gpu/drm/drm_cache.c pr_err("Architecture has no drm_cache.c support\n"); pr_err 137 drivers/gpu/drm/drm_cache.c pr_err("Timed out waiting for cache flush\n"); pr_err 139 drivers/gpu/drm/drm_cache.c pr_err("Architecture has no drm_cache.c support\n"); pr_err 170 drivers/gpu/drm/drm_cache.c pr_err("Timed out waiting for cache flush\n"); pr_err 172 drivers/gpu/drm/drm_cache.c pr_err("Architecture has no drm_cache.c support\n"); pr_err 23 drivers/gpu/drm/etnaviv/etnaviv_mmu.c pr_err("unaligned: iova 0x%lx size 0x%zx min_pagesz 0x%zx\n", pr_err 49 drivers/gpu/drm/etnaviv/etnaviv_mmu.c pr_err("unaligned: iova 0x%lx pa %pa size 0x%zx min_pagesz 0x%zx\n", pr_err 1641 drivers/gpu/drm/exynos/exynos_drm_dsi.c pr_err("%pOF: failed to get '%s' property\n", np, propname); pr_err 274 drivers/gpu/drm/gma500/cdv_intel_lvds.c pr_err("Can't enable LVDS and another encoder on the same pipe\n"); pr_err 748 drivers/gpu/drm/gma500/cdv_intel_lvds.c pr_err("Failed find\n"); pr_err 751 drivers/gpu/drm/gma500/cdv_intel_lvds.c pr_err("Failed DDC\n"); pr_err 754 drivers/gpu/drm/gma500/cdv_intel_lvds.c pr_err("Failed BLC\n"); pr_err 896 drivers/gpu/drm/gma500/psb_drv.h pr_err("access sgx when it's off!! (READ) %s, %d\n", \ pr_err 378 drivers/gpu/drm/gma500/psb_intel_lvds.c pr_err("Can't support LVDS on pipe A\n"); pr_err 382 drivers/gpu/drm/gma500/psb_intel_lvds.c pr_err("Must use PIPE A\n"); pr_err 390 drivers/gpu/drm/gma500/psb_intel_lvds.c pr_err("Can't enable LVDS and another encoder on the same pipe\n"); pr_err 767 drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c pr_err("%s: i2c_get_adapter(%d) failed\n", __func__, pr_err 774 drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c pr_err("%s: i2c_new_device() failed\n", __func__); pr_err 83 drivers/gpu/drm/i810/i810_drv.c pr_err("drm/i810 does not support SMP\n"); pr_err 339 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("unsupported page_sizes.sg=%u, supported=%u\n", pr_err 345 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("unsupported page_sizes.gtt=%u, supported=%u\n", pr_err 351 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("vma->page_sizes.phys(%u) != obj->mm.page_sizes.phys(%u)\n", pr_err 357 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("vma->page_sizes.sg(%u) != obj->mm.page_sizes.sg(%u)\n", pr_err 363 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("obj->page_sizes.gtt(%u) should never be set\n", pr_err 404 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("obj->base.size=%zu, expected=%u\n", pr_err 423 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("page_sizes.sg=%u, expected=%u\n", pr_err 482 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("obj->base.size=%zu, expected=%u\n", pr_err 511 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("page_sizes.gtt=%u, expected %u\n", pr_err 544 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("page_sizes.gtt=%u, expected %llu\n", pr_err 623 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("obj->base.size=%zd, expected=%llu\n", pr_err 680 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("node.start(%llx) not aligned to 2M\n", pr_err 688 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("node.size(%llx) not aligned to 2M\n", pr_err 696 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("gtt=%u, expected=%u, size=%zd, single=%s\n", pr_err 836 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("node.start(%llx) not aligned to 2M\n", pr_err 844 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("node.size(%llx) not aligned to 2M\n", pr_err 852 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("gtt=%u, expected=%u, i=%d, single=%s\n", pr_err 917 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("n=%lu ptr[%u]=%u, val=%u\n", pr_err 969 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("gpu-write failed at offset=%llx\n", offset); pr_err 975 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("cpu-check failed at offset=%llx\n", offset); pr_err 1150 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("pin_pages failed, size=%u, pages=%u\n", pr_err 1161 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("exhaust write-huge failed with size=%u\n", pr_err 1223 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("internal write-huge failed with size=%u\n", pr_err 1292 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("gemfs write-huge failed with size=%u\n", pr_err 1380 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("page_sizes.gtt=%u, expected=%u\n", pr_err 1568 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("shrink-all didn't truncate the pages\n"); pr_err 1574 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("residual page-size bits left\n"); pr_err 1628 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("failed to create 48b PPGTT\n"); pr_err 1635 drivers/gpu/drm/i915/gem/selftests/huge_pages.c pr_err("PPGTT missing 64K scratch page\n"); pr_err 82 drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c pr_err("vaddr[%u]=%x, expected=%x\n", i, pr_err 339 drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c pr_err("Failed to set stale value[%ld/%ld] in object using %s, err=%d\n", pr_err 348 drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c pr_err("Failed to set value[%ld/%ld] in object using %s, err=%d\n", pr_err 359 drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c pr_err("Failed to get value[%ld/%ld] in object using %s, err=%d\n", pr_err 365 drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c pr_err("Value[%ld/%ld] mismatch, (overwrite with %s) wrote [%s] %x read [%s] %x (inverse %x), at offset %x\n", pr_err 86 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed to populated %d contexts\n", nctx); pr_err 129 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Switching between %ld contexts timed out\n", pr_err 261 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%pS: Invalid value at object %d page %d/%ld, offset %d/%d: found %x expected %x\n", pr_err 272 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%pS: Invalid value at object %d page %d, offset %d: found %x expected %x (uninitialised)\n", pr_err 334 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed to fill object with cpu, err=%d\n", pr_err 413 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed to fill dword %lu [%lu/%lu] with gpu (%s) in ctx %u [full-ppgtt? %s], err=%d\n", pr_err 532 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed to fill dword %lu [%lu/%lu] with gpu (%s) in ctx %u [full-ppgtt? %s], err=%d\n", pr_err 743 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%s: Spinner failed to start!\n", name); pr_err 814 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%s: %s read slice count failed with %d%s\n", pr_err 819 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%s: %s slice count %d is not %u%s\n", pr_err 1012 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%s: Failed with %d!\n", name, ret); pr_err 1105 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed to fill dword %lu [%lu/%lu] with gpu (%s) in ctx %u [full-ppgtt? %s], err=%d\n", pr_err 1159 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Target offset 0x%08x_%08x overlaps with a node in the mm!\n", pr_err 1442 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("%s: Read %08x from scratch (offset 0x%08x_%08x), after %lu reads!\n", pr_err 1521 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed at line %d, err=%d\n", __LINE__, err); pr_err 1525 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Did not retire immediately with 0 engines\n"); pr_err 1537 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed at line %d, err=%d\n", __LINE__, err); pr_err 1541 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Did not retire immediately for all unused engines\n"); pr_err 1548 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Request allocation failed!\n"); pr_err 1561 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Did not hit fault injection!\n"); pr_err 1563 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Invoked callback on error!\n"); pr_err 1576 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Failed at line %d, err=%d\n", __LINE__, err); pr_err 1581 drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c pr_err("Did not retire on each active engines\n"); pr_err 26 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_export failed with err=%d\n", pr_err 49 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_export failed with err=%d\n", pr_err 57 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_import failed with err=%d\n", pr_err 64 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_import created a new object!\n"); pr_err 94 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_import failed with err=%d\n", pr_err 101 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_import created a non-i915 object!\n"); pr_err 107 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_import is wrong size found %lld, expected %ld\n", pr_err 115 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("dma_buf_vmap failed\n"); pr_err 124 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_object_pin_map failed with err=%d\n", err); pr_err 132 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("imported vmap not all set to %x!\n", pattern[i]); pr_err 142 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("exported vmap not all set to %x!\n", pattern[i]); pr_err 175 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("dma_buf_vmap failed\n"); pr_err 185 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_import failed with err=%d\n", pr_err 195 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_object_pin_pages failed with err=%d\n", err); pr_err 224 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_export failed with err=%d\n", pr_err 233 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("dma_buf_vmap failed\n"); pr_err 239 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("Exported object not initialiased to zero!\n"); pr_err 273 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_prime_export failed with err=%d\n", err); pr_err 279 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("dma_buf_kmap failed\n"); pr_err 286 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("Exported page[0] not initialiased to zero!\n"); pr_err 297 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("i915_gem_object_pin_map failed with err=%d\n", err); pr_err 306 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("dma_buf_kmap failed\n"); pr_err 313 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("Exported page[1] not set to 0xaa!\n"); pr_err 323 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("dma_buf_kmap failed\n"); pr_err 329 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("Exported page[0] did not retain 0xc5!\n"); pr_err 337 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("Erroneously kmapped beyond the end of the object!\n"); pr_err 345 drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c pr_err("Erroneously kmapped before the start of the object!\n"); pr_err 94 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Failed to set tiling mode=%u, stride=%u, err=%d\n", pr_err 106 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Failed to flush to GTT write domain; err=%d\n", err); pr_err 124 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Failed to pin partial view: offset=%lu; err=%d\n", pr_err 135 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Failed to iomap partial view: offset=%lu; err=%d\n", pr_err 153 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Partial view for %lu [%u] (offset=%llu, size=%u [%llu, row size %u], fence=%d, tiling=%d, stride=%d) misalignment, expected write to page (%llu + %u [0x%llx]) of 0x%x, found 0x%x\n", pr_err 203 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Failed to allocate %u pages (%lu total), err=%d\n", pr_err 441 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Failed to trim VMA manager, err=%d\n", err); pr_err 449 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Unable to insert object into single page hole\n"); pr_err 456 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Unexpectedly succeeded in inserting too large object into single page hole\n"); pr_err 470 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Unable to insert object into reclaimed hole\n"); pr_err 475 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("Unexpectedly succeeded in inserting object into no holes!\n"); pr_err 497 drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c pr_err("[loop %d] Failed to busy the object\n", loop); pr_err 24 drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c pr_err("i915_gem_object_create failed, err=%d\n", err); pr_err 52 drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c pr_err("Failed to allocate %u pages (%lu total), err=%d\n", pr_err 60 drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c pr_err("Page lookup mismatch at index %u [%u]\n", pr_err 82 drivers/gpu/drm/i915/gem/selftests/i915_gem_object_blt.c pr_err("vaddr[%u]=%x, expected=%x\n", i, pr_err 183 drivers/gpu/drm/i915/gem/selftests/i915_gem_object_blt.c pr_err("vaddr[%u]=%x, expected=%x\n", i, pr_err 24 drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c pr_err("i915_gem_object_create failed, err=%d\n", err); pr_err 32 drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c pr_err("i915_gem_object_attach_phys failed, err=%d\n", err); pr_err 37 drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c pr_err("i915_gem_object_attach_phys did not create a phys object\n"); pr_err 43 drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c pr_err("i915_gem_object_attach_phys did not pin its phys pages\n"); pr_err 53 drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c pr_err("i915_gem_object_set_to_gtt_domain failed with err=%d\n", pr_err 250 drivers/gpu/drm/i915/gt/intel_engine_user.c pr_err("UABI engine not found for { class:%d, instance:%d }\n", pr_err 258 drivers/gpu/drm/i915/gt/intel_engine_user.c pr_err("Wrong UABI engine:%s { class:%d, instance:%d } found for { class:%d, instance:%d }\n", pr_err 279 drivers/gpu/drm/i915/gt/intel_engine_user.c pr_err("mismatching default context state for class %d on engine %s\n", pr_err 132 drivers/gpu/drm/i915/gt/selftest_context.c pr_err("%s context overwrote trailing red-zone!", engine->name); pr_err 228 drivers/gpu/drm/i915/gt/selftest_context.c pr_err("%s is awake before starting %s!\n", pr_err 252 drivers/gpu/drm/i915/gt/selftest_context.c pr_err("context is not active; expected idle-barrier (%s pass %d)\n", pr_err 259 drivers/gpu/drm/i915/gt/selftest_context.c pr_err("%s is asleep before idle-barrier\n", pr_err 272 drivers/gpu/drm/i915/gt/selftest_context.c pr_err("context is still active!"); pr_err 393 drivers/gpu/drm/i915/gt/selftest_context.c pr_err("remote context is not active; expected idle-barrier (%s pass %d)\n", pr_err 22 drivers/gpu/drm/i915/gt/selftest_engine_cs.c pr_err("%s(%s, class:%d, instance:%d): mmio base for gen %x is before the one for gen %x\n", pr_err 34 drivers/gpu/drm/i915/gt/selftest_engine_cs.c pr_err("%s(%s, class:%d, instance:%d): invalid mmio base (%x) for gen %x at entry %u\n", pr_err 23 drivers/gpu/drm/i915/gt/selftest_engine_pm.c pr_err("Unable to flush GT pm before test\n"); pr_err 51 drivers/gpu/drm/i915/gt/selftest_engine_pm.c pr_err("intel_engine_pm_get_if_awake(%s) failed under %s\n", pr_err 60 drivers/gpu/drm/i915/gt/selftest_engine_pm.c pr_err("%s is still awake after flushing pm\n", pr_err 67 drivers/gpu/drm/i915/gt/selftest_engine_pm.c pr_err("GT failed to idle\n"); pr_err 327 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Failed to create request for %s, err=%d\n", pr_err 350 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Wait for request failed on %s, err=%d\n", pr_err 427 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Full GPU reset not recorded!\n"); pr_err 491 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s failed to idle before reset\n", pr_err 512 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine failed\n"); pr_err 517 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Full GPU reset recorded! (engine reset expected)\n"); pr_err 524 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s engine reset not recorded!\n", pr_err 581 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s failed to idle before reset\n", pr_err 611 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s: Failed to start request %llx, at %x\n", pr_err 626 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine failed\n"); pr_err 631 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Full GPU reset recorded! (engine reset expected)\n"); pr_err 638 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s engine reset not recorded!\n", pr_err 819 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine(%s:%s): failed to idle before reset\n", pr_err 873 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s: Failed to start request %llx, at %x\n", pr_err 886 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine(%s:%s): failed, err=%d\n", pr_err 898 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine(%s:%s):" pr_err 918 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine(%s:%s):" pr_err 936 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine(%s:%s): reset %lu times, but reported %lu\n", pr_err 951 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("kthread for other engine %s failed, err=%d\n", pr_err 961 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Innocent engine %s was reset (count=%ld)\n", pr_err 971 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Global reset (count=%ld)!\n", pr_err 1081 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s: Failed to start request %llx, at %x\n", pr_err 1095 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_request_wait failed on a stuck request: err=%ld\n", pr_err 1102 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("No GPU reset recorded!\n"); pr_err 1156 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Invalid Y-tiling settings; err:%d\n", err); pr_err 1162 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Unable to pin vma for Y-tiled fence; err:%d\n", err); pr_err 1169 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Unable to pin Y-tiled fence; err:%d\n", err); pr_err 1213 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Invalid X-tiling settings; err:%d\n", err); pr_err 1242 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Unable to pin X-tiled fence; err:%d\n", err); pr_err 1270 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s: Failed to start request %llx, at %x\n", pr_err 1293 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("igt/evict_vma kthread did not wait\n"); pr_err 1454 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s(%s): Failed to idle other inactive engines after device reset\n", pr_err 1467 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s(%s): Failed to start request %llx, at %x\n", pr_err 1485 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("GPU reset not recorded on hanging request [fence.error=%d]!\n", pr_err 1494 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Fence error status not zero [%d] after unrelated reset\n", pr_err 1503 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("No GPU reset recorded!\n"); pr_err 1574 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s: Failed to start request %llx, at %x\n", pr_err 1596 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("Guilty request not identified!\n"); pr_err 1629 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("i915_reset_engine(%s:%s) failed under %s\n", pr_err 1662 drivers/gpu/drm/i915/gt/selftest_hangcheck.c pr_err("%s(%s): Failed to start request %llx, at %x\n", pr_err 212 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Failed to slice along semaphore chain of length (%d, %d)!\n", pr_err 419 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s: Busywaiting request did not!\n", pr_err 449 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s: Failed to preempt semaphore busywait!\n", pr_err 516 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Logical preemption supported, but not exposed\n"); pr_err 663 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("First context failed to start\n"); pr_err 677 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Second context overtook first?\n"); pr_err 685 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("High priority context failed to preempt the low priority context\n"); pr_err 796 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("First client failed to start\n"); pr_err 815 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Second client started too early!\n"); pr_err 822 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Second client failed to start\n"); pr_err 829 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Preemption recorded x%d; should have been suppressed!\n", pr_err 912 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("First client failed to start\n"); pr_err 933 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Second client failed to start\n"); pr_err 943 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Preemption on %s recorded x%d, depth %d; should have been suppressed!\n", pr_err 1091 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s: First client failed to start\n", pr_err 1100 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s: Waiter depth:%d completed!\n", pr_err 1112 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s: Preemption recorded x%d, depth %d; should have been suppressed!\n", pr_err 1198 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Timed out waiting to flush %s\n", engine->name); pr_err 1242 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Failed to preempt over chain of %d\n", pr_err 1258 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Failed to flush low priority chain of %d requests\n", pr_err 1364 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Preemption did not occur within timeout!"); pr_err 1752 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s(%s): wait for %llx:%lld timed out\n", pr_err 1813 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Failed to wrap engine %s: err=%d\n", pr_err 1900 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s(%s): wait for %llx:%lld timed out\n", pr_err 1916 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Executed on wrong sibling '%s', expected '%s'\n", pr_err 2076 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Master request did not execute (on %s)!\n", pr_err 2090 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("Bonded request did not execute on target engine: expected %s, used %s; master was %s\n", pr_err 2155 drivers/gpu/drm/i915/gt/selftest_lrc.c pr_err("%s(%s): failed class=%d, nsibling=%d, err=%d\n", pr_err 27 drivers/gpu/drm/i915/gt/selftest_reset.c pr_err("No GPU reset recorded!\n"); pr_err 90 drivers/gpu/drm/i915/gt/selftest_reset.c pr_err("__intel_gt_reset failed under %s\n", p->name); pr_err 141 drivers/gpu/drm/i915/gt/selftest_reset.c pr_err("intel_engine_reset(%s) failed under %s\n", pr_err 78 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("HWSP cacheline %lu already used; duplicate allocation!\n", pr_err 174 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("%s: %s(ctx=%llu, seqno=%u) expected passed %s but failed\n", pr_err 307 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Lookup of %llu failed\n", id); pr_err 337 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Lookup of %lu failed\n", end_time); pr_err 473 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Failed to write to timeline!\n"); pr_err 487 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Timeline created with incorrect breadcrumb, found %x, expected %x\n", pr_err 555 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Invalid seqno stored in timeline %lu, found 0x%x\n", pr_err 631 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Invalid seqno stored in timeline %lu, found 0x%x\n", pr_err 733 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Wait for timeline writes timed out!\n"); pr_err 739 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Bad timeline values: found (%x, %x), expected (%x, %x)\n", pr_err 806 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Wait for timeline writes timed out!\n"); pr_err 813 drivers/gpu/drm/i915/gt/selftest_timeline.c pr_err("Invalid seqno stored in timeline %lu, found 0x%x\n", pr_err 214 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Invalid RING_NONPRIV[%d], expected 0x%08x, found 0x%08x\n", pr_err 274 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Spinner failed to start\n"); pr_err 308 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Invalid whitelist *before* %s reset!\n", name); pr_err 322 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("%s reset failed\n", name); pr_err 328 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Whitelist not preserved in context across %s reset!\n", pr_err 343 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Invalid whitelist *after* %s reset in fresh context!\n", pr_err 580 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("%s: Futzing %x timedout; cancelling test\n", pr_err 598 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("%s: Unable to write to whitelisted register %x\n", pr_err 628 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("%s: %d mismatch between values written to whitelisted register [%x], and values read back!\n", pr_err 905 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Whitelisted register 0x%4x not context saved: A=%08x, B=%08x\n", pr_err 927 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Whitelist register 0x%4x:%08x was unwritable\n", pr_err 1211 drivers/gpu/drm/i915/gt/selftest_workarounds.c pr_err("Spinner failed to start\n"); pr_err 130 drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c pr_err("invalid FW blob order: %s r%u comes before %s r%u\n", pr_err 42 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("doorbell %d, not ok\n", db_id); pr_err 71 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("doorbell %u ring failed!\n", client->doorbell_id); pr_err 76 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("doorbell %u ring put WQ in bad state (%u)!\n", pr_err 124 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("No guc object!\n"); pr_err 140 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("guc_clients_destroy lied!\n"); pr_err 147 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("Failed to create clients\n"); pr_err 155 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("execbug client validation failed\n"); pr_err 161 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("guc_clients_create didn't reserve doorbells\n"); pr_err 171 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("failed to initialize the doorbells\n"); pr_err 216 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("No guc object!\n"); pr_err 229 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] No guc client\n", i); pr_err 236 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] unexpected error\n", i); pr_err 242 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] non-db related alloc fail\n", i); pr_err 256 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] more clients than doorbells (%d >= %d)\n", pr_err 264 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] client_alloc sanity check failed!\n", i); pr_err 273 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] Failed to create a doorbell\n", i); pr_err 279 drivers/gpu/drm/i915/gt/uc/selftest_guc.c pr_err("[%d] doorbell id changed (%d != %d)\n", pr_err 689 drivers/gpu/drm/i915/gvt/cmd_parser.c pr_err("0x%x ", sub_op_val(cmd, d_info->sub_op[i].hi, pr_err 692 drivers/gpu/drm/i915/gvt/cmd_parser.c pr_err("\n"); pr_err 1515 drivers/gpu/drm/i915/gvt/cmd_parser.c pr_err("cmd dump: "); pr_err 1518 drivers/gpu/drm/i915/gvt/cmd_parser.c pr_err("\n%08x ", cmd_val(s, i)); pr_err 1520 drivers/gpu/drm/i915/gvt/cmd_parser.c pr_err("%08x ", cmd_val(s, i)); pr_err 1522 drivers/gpu/drm/i915/gvt/cmd_parser.c pr_err("\nvgpu%d: aperture 0x%llx - 0x%llx, hidden 0x%llx - 0x%llx\n", pr_err 28 drivers/gpu/drm/i915/gvt/debug.h pr_err("gvt: "fmt, ##args) pr_err 33 drivers/gpu/drm/i915/gvt/debug.h pr_err("gvt: "fmt, ##args); \ pr_err 35 drivers/gpu/drm/i915/gvt/debug.h pr_err("gvt: vgpu %d: "fmt, vgpu->id, ##args);\ pr_err 177 drivers/gpu/drm/i915/gvt/handlers.c pr_err("Detected your guest driver doesn't support GVT-g.\n"); pr_err 180 drivers/gpu/drm/i915/gvt/handlers.c pr_err("Graphics resource is not enough for the guest\n"); pr_err 183 drivers/gpu/drm/i915/gvt/handlers.c pr_err("GVT Internal error for the guest\n"); pr_err 188 drivers/gpu/drm/i915/gvt/handlers.c pr_err("Now vgpu %d will enter failsafe mode.\n", vgpu->id); pr_err 40 drivers/gpu/drm/i915/i915_gem.h pr_err("%s:%d GEM_BUG_ON(%s)\n", \ pr_err 116 drivers/gpu/drm/i915/selftests/i915_active.c pr_err("Failed to track active ref!\n"); pr_err 125 drivers/gpu/drm/i915/selftests/i915_active.c pr_err("i915_active retired before submission!\n"); pr_err 129 drivers/gpu/drm/i915/selftests/i915_active.c pr_err("i915_active not tracking all requests, found %d, expected %d\n", pr_err 165 drivers/gpu/drm/i915/selftests/i915_active.c pr_err("i915_active not retired after waiting!\n"); pr_err 204 drivers/gpu/drm/i915/selftests/i915_active.c pr_err("i915_active not retired after flushing!\n"); pr_err 17 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block info: header=%llx, state=%u, order=%d, offset=%llx size=%llx root=%s buddy=%s\n", pr_err 53 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block state mismatch\n"); pr_err 61 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block size smaller than min size\n"); pr_err 66 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block size not power of two\n"); pr_err 71 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block size not aligned to min size\n"); pr_err 76 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block offset not aligned to min size\n"); pr_err 81 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block offset not aligned to block size\n"); pr_err 88 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy has gone fishing\n"); pr_err 94 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy has wrong offset\n"); pr_err 99 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy size mismatch\n"); pr_err 105 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block and its buddy are free\n"); pr_err 131 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block not allocated\n"), pr_err 145 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("block offset mismatch\n"); pr_err 159 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("size mismatch, expected=%llx, found=%llx\n", pr_err 167 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("prev block, dump:\n"); pr_err 172 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("bad block, dump:\n"); pr_err 188 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("n_roots is zero\n"); pr_err 193 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("n_roots mismatch, n_roots=%u, expected=%lu\n", pr_err 208 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("root(%u) is NULL\n", i); pr_err 216 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("root not free\n"); pr_err 224 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("max order root missing\n"); pr_err 239 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("root offset mismatch\n"); pr_err 248 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("root mismatch at order=%u\n", order); pr_err 261 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("expected mm size=%llx, found=%llx\n", mm->size, pr_err 269 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("prev root(%u), dump:\n", i - 1); pr_err 274 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("bad root(%u), dump:\n", i); pr_err 312 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_init failed(%d)\n", err); pr_err 324 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("pre-mm check failed, abort\n"); pr_err 347 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_alloc with order=%d failed(%d)\n", pr_err 357 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_alloc order mismatch\n"); pr_err 373 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("post-mm check failed\n"); pr_err 405 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_init failed(%d)\n", err); pr_err 498 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_init failed(%d)\n", err); pr_err 549 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_init failed(%d)\n", err); pr_err 630 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("buddy_init failed(%d)\n", err); pr_err 636 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("pre-mm check failed, abort, abort, abort!\n"); pr_err 655 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("alloc_range with offset=%llx, size=%llx failed(%d)\n", pr_err 666 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("alloc_range has no blocks\n"); pr_err 672 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("alloc_range start offset mismatch, found=%llx, expected=%llx\n", pr_err 700 drivers/gpu/drm/i915/selftests/i915_buddy.c pr_err("post-mm check failed\n"); pr_err 88 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("%s: Found %lu objects unbound, expected %u!\n", pr_err 94 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("%s: Found %lu objects bound, expected %lu!\n", pr_err 100 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("No objects on the GGTT inactive list!\n"); pr_err 156 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("i915_gem_evict_something failed on a full GGTT with err=%d\n", pr_err 169 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("i915_gem_evict_something failed on a full GGTT with err=%d\n", pr_err 205 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("Failed to evict+insert, i915_gem_object_ggtt_pin returned err=%d\n", (int)PTR_ERR(vma)); pr_err 235 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("i915_gem_evict_for_node on a full GGTT returned err=%d\n", pr_err 245 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("i915_gem_evict_for_node returned err=%d\n", pr_err 295 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("[0]i915_gem_object_ggtt_pin failed\n"); pr_err 312 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("[1]i915_gem_object_ggtt_pin failed\n"); pr_err 322 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("[0]i915_gem_evict_for_node returned err=%d\n", err); pr_err 333 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("[1]i915_gem_evict_for_node returned err=%d\n", err); pr_err 363 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("i915_gem_evict_vm on a full GGTT returned err=%d]\n", pr_err 372 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("i915_gem_evict_vm on a full GGTT returned err=%d]\n", pr_err 481 drivers/gpu/drm/i915/selftests/i915_gem_evict.c pr_err("Unexpected error from request alloc (ctx hw id %u, on %s): %d\n", pr_err 403 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) pin (forward) failed with err=%d on size=%lu pages (prime=%lu), offset=%llx\n", pr_err 410 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) (forward) insert failed: vma.node=%llx + %llx [allocated? %d], expected offset %llx\n", pr_err 440 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) (forward) moved vma.node=%llx + %llx, expected offset %llx\n", pr_err 449 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) (forward) unbind of vma.node=%llx + %llx failed with err=%d\n", pr_err 476 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) pin (backward) failed with err=%d on size=%lu pages (prime=%lu), offset=%llx\n", pr_err 483 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) (backward) insert failed: vma.node=%llx + %llx [allocated? %d], expected offset %llx\n", pr_err 513 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) (backward) moved vma.node=%llx + %llx [allocated? %d], expected offset %llx\n", pr_err 522 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s(%s) (backward) unbind of vma.node=%llx + %llx failed with err=%d\n", pr_err 592 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s bind failed at %llx + %llx [hole %llx- %llx] with err=%d\n", pr_err 601 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s incorrect at %llx + %llx\n", pr_err 609 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s unbind failed at %llx + %llx with err=%d\n", pr_err 675 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s failed to pin object at %llx in hole [%llx - %llx], with err=%d\n", pr_err 685 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s incorrect at %llx + %llx\n", pr_err 779 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s failed to pin object at %llx + %llx in hole [%llx - %llx], with err=%d\n", pr_err 789 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s incorrect at %llx + %llx\n", pr_err 860 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s failed to pin object at %llx + %llx in hole [%llx - %llx], with err=%d\n", pr_err 867 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("%s incorrect at %llx + %llx\n", pr_err 1209 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("insert page failed: found %d, expected %d\n", pr_err 1339 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_reserve (pass 1) failed at %llu/%llu with err=%d\n", pr_err 1348 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", pr_err 1389 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_reserve (pass 2) failed at %llu/%llu with err=%d\n", pr_err 1398 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", pr_err 1419 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_vma_unbind failed with err=%d!\n", err); pr_err 1433 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_reserve (pass 3) failed at %llu/%llu with err=%d\n", pr_err 1442 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", pr_err 1506 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("Invalid i915_gem_gtt_insert(.size=%llx, .alignment=%llx, .start=%llx, .end=%llx) succeeded (err=%d)\n", pr_err 1550 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_insert (pass 1) failed at %llu/%llu with err=%d\n", pr_err 1570 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("VMA was unexpectedly evicted!\n"); pr_err 1594 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_vma_unbind failed with err=%d!\n", err); pr_err 1603 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_insert (pass 2) failed at %llu/%llu with err=%d\n", pr_err 1611 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_insert did not return node to its previous location (the only hole), expected address %llx, found %llx\n", pr_err 1650 drivers/gpu/drm/i915/selftests/i915_gem_gtt.c pr_err("i915_gem_gtt_insert (pass 3) failed at %llu/%llu with err=%d\n", pr_err 79 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request wait (busy query) succeeded (expected timeout before submit!)\n"); pr_err 84 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request wait succeeded (expected timeout before submit!)\n"); pr_err 89 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request completed before submit!!\n"); pr_err 96 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request wait (busy query) succeeded (expected timeout after submit!)\n"); pr_err 101 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request completed immediately!\n"); pr_err 106 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request wait succeeded (expected timeout!)\n"); pr_err 111 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request wait timed out!\n"); pr_err 116 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request not complete after waiting!\n"); pr_err 121 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("request wait timed out when already complete!\n"); pr_err 151 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("fence wait success before submit (expected timeout)!\n"); pr_err 159 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("fence signaled immediately!\n"); pr_err 164 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("fence wait success after submit (expected timeout)!\n"); pr_err 169 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("fence wait timed out (expected success)!\n"); pr_err 174 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("fence unsignaled after waiting!\n"); pr_err 179 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("fence wait timed out when complete (expected success)!\n"); pr_err 226 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("failed to cancel request (already executed)!\n"); pr_err 239 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("timed out waiting for high priority request\n"); pr_err 244 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("low priority request already completed\n"); pr_err 383 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("waiting for %d/%d fences (last %llx:%lld) on %s timed out!\n", pr_err 400 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%llu:%llu was not signaled!\n", pr_err 858 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: Unable to create batch, err=%d\n", __func__, err); pr_err 866 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: Request allocation failed with err=%d\n", pr_err 891 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s(%s): request completed too early!\n", pr_err 900 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: failed to resolve batch, err=%d\n", __func__, err); pr_err 911 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: error waiting for request on %s, err=%d\n", pr_err 965 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: Unable to create batch for %s, err=%d\n", pr_err 973 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: Request allocation failed for %s with err=%d\n", pr_err 983 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: Request await failed for %s with err=%d\n", pr_err 1013 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s(%s): request completed too early!\n", pr_err 1021 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: failed to resolve batch, err=%d\n", pr_err 1030 drivers/gpu/drm/i915/selftests/i915_request.c pr_err("%s: error waiting for request on %s, err=%d\n", pr_err 316 drivers/gpu/drm/i915/selftests/i915_selftest.c pr_err(DRIVER_NAME "/%s: setup failed for %s\n", pr_err 326 drivers/gpu/drm/i915/selftests/i915_selftest.c pr_err(DRIVER_NAME "/%s: %s failed with error %d\n", pr_err 110 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("recursive cycle not detected (AA)\n"); pr_err 122 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("single depth cycle not detected (BAB)\n"); pr_err 133 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("invalid cycle detected\n"); pr_err 137 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("single depth cycle not detected (CBC)\n"); pr_err 141 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("cycle not detected (BA, CB, AC)\n"); pr_err 145 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("invalid cycle detected\n"); pr_err 155 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("fence C not done\n"); pr_err 159 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("fence B not done\n"); pr_err 163 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("fence A not done\n"); pr_err 194 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Incorrectly reported fence A was complete before await\n"); pr_err 206 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence B is not done\n"); pr_err 211 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A is not done\n"); pr_err 249 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Incorrectly reported fence B was complete before await\n"); pr_err 257 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Incorrectly reported fence C was complete before await\n"); pr_err 264 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A completed early\n"); pr_err 270 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence B completed early\n"); pr_err 275 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A completed early (after signaling B)\n"); pr_err 283 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence C not done\n"); pr_err 287 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence B not done\n"); pr_err 291 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A not done\n"); pr_err 346 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A completed early\n"); pr_err 351 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence B completed early\n"); pr_err 357 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence C not done\n"); pr_err 362 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence B not done\n"); pr_err 367 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A not done\n"); pr_err 427 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence A not done\n"); pr_err 432 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence B not done\n"); pr_err 437 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence C not done\n"); pr_err 486 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence[%d] completed early\n", i); pr_err 493 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence[%d] is not done\n", i); pr_err 549 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("worker updated value before i915_sw_fence was signaled\n"); pr_err 557 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("worker signaled i915_sw_fence before value was posted\n"); pr_err 577 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence with immediate expiration not signaled\n"); pr_err 587 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence with future expiration (%lu jiffies) already signaled\n", delay); pr_err 596 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence not signaled after wait\n"); pr_err 600 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fence signaled too early, target=%lu, now=%lu\n", pr_err 685 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fences immediately signaled\n"); pr_err 701 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fences signaled too early\n"); pr_err 708 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Timeout fence unsignaled!\n"); pr_err 713 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("No timeout fence signaled!\n"); pr_err 721 drivers/gpu/drm/i915/selftests/i915_sw_fence.c pr_err("Fences unsignaled\n"); pr_err 105 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("sync not cleared after free\n"); pr_err 124 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("%s", buf); pr_err 149 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("%s: not a leaf, height is %d\n", pr_err 155 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("%s: seqno[%d], found %x, expected %x\n", pr_err 172 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting first context=%llx did not return leaf (height=%d, prefix=%llx\n", pr_err 178 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting first context=%llx created branches!\n", pr_err 184 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("First bitmap does not contain a single entry, found %x (count=%d)!\n", pr_err 194 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Lookup of first context=%llx/seqno=%x failed!\n", pr_err 247 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting context=%llx did not return leaf (height=%d, prefix=%llx\n", pr_err 253 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("First entry into leaf (context=%llx) does not contain a single entry, found %x (count=%d)!\n", pr_err 263 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Lookup of first entry context=%llx/seqno=%x failed!\n", pr_err 309 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Parent with no height!\n"); pr_err 315 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Join does not have 2 children: %x (%d)\n", pr_err 322 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Leaf misplaced in parent!\n"); pr_err 353 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting context=%llx (order=%d, step=%d) did not return leaf (height=%d, prefix=%llx\n", pr_err 366 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("1: context %llx (order=%d, step=%d) not found\n", pr_err 374 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("1: context %llx (order=%d, step=%d) should not exist\n", pr_err 388 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("2: context %llx (order=%d, step=%d) not found\n", pr_err 426 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting context=%llx did not return leaf (height=%d, prefix=%llx\n", pr_err 433 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting neighbouring context=0x%llx+%d, did not fit into the same leaf bitmap=%x (%d), expected %lx (%d)\n", pr_err 476 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Inserting context=%llx (order=%d, idx=%d) did not return leaf (height=%d, prefix=%llx\n", pr_err 486 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Parent (join) of last leaf was not the sync!\n"); pr_err 492 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Join does not have the expected height, found %d, expected %d\n", pr_err 499 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Join is not full!, found %x (%d) expected %lx (%d)\n", pr_err 511 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Child %d is a not leaf!\n", idx); pr_err 517 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Child %d is not attached to us!\n", pr_err 524 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Child %d holds more than one id, found %x (%d)\n", pr_err 531 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("Child %d has wrong seqno idx, found %d, expected %d\n", pr_err 585 drivers/gpu/drm/i915/selftests/i915_syncmap.c pr_err("context=%llu, last=%u this=%u did not match expectation (%d)\n", pr_err 42 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA created with wrong VM\n"); pr_err 47 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA created with wrong size, found %llu, expected %zu\n", pr_err 53 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA created with wrong type [%d]\n", pr_err 75 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA's vm [%p] does not match request [%p]\n", pr_err 81 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA ggtt status [%d] does not match parent [%d]\n", pr_err 87 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("i915_vma_compare failed with create parameters!\n"); pr_err 93 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("i915_vma_compare failed with itself\n"); pr_err 98 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("i915_vma_compare failed to detect the difference!\n"); pr_err 125 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA lookup/create failed\n"); pr_err 132 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Failed to pin VMA\n"); pr_err 328 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("%s to pin single page into GGTT with mode[%d:%s]: size=%llx flags=%llx, err=%d\n", pr_err 342 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Failed to unbind single page from GGTT, err=%d\n", err); pr_err 378 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Invalid sg table: too short at plane %d, (%d, %d)!\n", pr_err 387 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Invalid sg.length, found %d, expected %lu for rotated page (%d, %d) [src index %lu]\n", pr_err 394 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Invalid address for rotated page (%d, %d) [src index %lu]\n", pr_err 430 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Invalid sg table: too short at plane %d, (%d, %d)!\n", pr_err 443 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Invalid sg.length, found %d, expected %lu for remapped page (%d, %d) [src index %lu]\n", pr_err 450 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Invalid address for remapped page (%d, %d) [src index %lu]\n", pr_err 540 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Failed to pin VMA, err=%d\n", err); pr_err 546 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA is wrong size, expected %lu, found %llu\n", pr_err 554 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA is wrong size, expected %lu, found %llu\n", pr_err 561 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("sg table is wrong sizeo, expected %u, found %u nents\n", pr_err 568 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA binding too small, expected %llu, found %llu\n", pr_err 575 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA using unrotated object pages!\n"); pr_err 587 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Inconsistent %s VMA pages for plane %d: [(%d, %d, %d, %d), (%d, %d, %d, %d)]\n", pr_err 630 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Partial scattergather list too long\n"); pr_err 636 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("DMA mismatch for partial page offset %lu\n", pr_err 656 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) VMA is wrong size, expected %llu, found %llu\n", pr_err 662 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) VMA binding too small, expected %llu, found %llu\n", pr_err 669 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) VMA mismatch upon creation!\n", pr_err 675 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) VMA using original object pages!\n", pr_err 681 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("Not the normal ggtt view! Found %d\n", pr_err 687 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("VMA not using object pages!\n"); pr_err 746 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) Inconsistent partial pinning for (offset=%d, size=%d)\n", pr_err 753 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) Inconsistent partial pages for (offset=%d, size=%d)\n", pr_err 770 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) All partial vma were not recorded on the obj->vma_list: found %u, expected %u\n", pr_err 788 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) inconsistent full pin\n", p->name); pr_err 799 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("(%s) allocated an extra full vma!\n", p->name); pr_err 963 drivers/gpu/drm/i915/selftests/i915_vma.c pr_err("%s VMA write test failed, expected 0x%x, found 0x%x\n", pr_err 24 drivers/gpu/drm/i915/selftests/igt_flush_test.c pr_err("%pS timed out, cancelling all further testing.\n", pr_err 33 drivers/gpu/drm/i915/selftests/igt_live_test.c pr_err("%s(%s): failed to idle before, with err=%d!", pr_err 59 drivers/gpu/drm/i915/selftests/igt_live_test.c pr_err("%s(%s): GPU was reset %d times!\n", pr_err 70 drivers/gpu/drm/i915/selftests/igt_live_test.c pr_err("%s(%s): engine '%s' was reset %d times!\n", pr_err 37 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("%s: entry[%d]:(%x, %x) is not watertight to previous (%x)\n", pr_err 44 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("%s: entry[%d]:(%x, %x) is less than the previous (%x)\n", pr_err 51 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("%s: entry[%d]:(%x, %x) has negative length\n", pr_err 81 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("%s: entry[%d]:(%x) is before previous (%x)\n", pr_err 207 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("fw_domain %s still active, aborting test!\n", pr_err 227 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("Failed to clear fw_domain %s\n", pr_err 234 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("%s:%s was zero while fw was held!\n", pr_err 242 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("%s:%s=%0x, fw_domains 0x%x still up after 100ms!\n", pr_err 303 drivers/gpu/drm/i915/selftests/intel_uncore.c pr_err("Unclaimed mmio read to register 0x%04x\n", pr_err 163 drivers/gpu/drm/i915/selftests/mock_gem_device.c pr_err("Failed to initialise mock GEM device: err=%d\n", err); pr_err 56 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s left pages out of order, expected pfn %lu, found pfn %lu (using for_each_sg)\n", pr_err 62 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s copied wrong sg length, expected size %lu, found %u (using for_each_sg)\n", pr_err 73 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s finished on wrong pfn, expected %lu, found %lu\n", pr_err 93 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s left pages out of order, expected pfn %lu, found pfn %lu (using for_each_sg_page)\n", pr_err 104 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s finished on wrong pfn, expected %lu, found %lu\n", pr_err 123 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s left pages out of order, expected pfn %lu, found pfn %lu (using for_each_sgt_page)\n", pr_err 134 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("%s: %s finished on wrong pfn, expected %lu, found %lu\n", pr_err 347 drivers/gpu/drm/i915/selftests/scatterlist.c pr_err("i915_sg_trim failed (nents %u, orig_nents %u), expected %lu\n", pr_err 542 drivers/gpu/drm/mediatek/mtk_drm_ddp.c pr_err("could not acquire mutex %d\n", mutex->id); pr_err 997 drivers/gpu/drm/meson/meson_vclk.c pr_err("Fatal Error, invalid HDMI-TX freq %d\n", pr_err 1005 drivers/gpu/drm/meson/meson_vclk.c pr_err("Fatal Error, invalid HDMI venc freq %d\n", pr_err 1038 drivers/gpu/drm/meson/meson_vclk.c pr_err("Fatal Error, invalid HDMI vclk freq %d\n", vclk_freq); pr_err 497 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c pr_err("invalid encoder\n"); pr_err 50 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c pr_err("invalid parameters\n"); pr_err 55 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c pr_err("hw_blk:%d.%d invalid refcount\n", hw_blk->type, pr_err 100 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c pr_err("failed to start hw_blk:%d rc:%d\n", type, rc); pr_err 122 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c pr_err("invalid parameters\n"); pr_err 130 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c pr_err("hw_blk:%d.%d invalid put\n", hw_blk->type, hw_blk->id); pr_err 271 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c pr_err("hw recovery is not complete for ctl:%d\n", ctx->idx); pr_err 448 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c pr_err("unknown interface type %d\n", cfg->intf_mode_sel); pr_err 491 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c pr_err("failed to create dpu_hw_ctl %d\n", idx); pr_err 854 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c pr_err("invalid IRQ index: [%d]\n", irq_idx); pr_err 900 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c pr_err("invalid IRQ index: [%d]\n", irq_idx); pr_err 940 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c pr_err("invalid IRQ index: [%d]\n", irq_idx); pr_err 1043 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c pr_err("invalid IRQ index: [%d]\n", irq_idx); pr_err 275 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c pr_err("failed to create dpu_hw_intf %d\n", idx); pr_err 14 drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h #define DEV_ERR(fmt, args...) pr_err(fmt, ##args) pr_err 52 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h #define DPU_ERROR(fmt, ...) pr_err("[dpu error]" fmt, ##__VA_ARGS__) pr_err 210 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: cannot get gdsc\n", __func__); pr_err 216 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: cannot get interface clock\n", __func__); pr_err 224 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: unable to enable gdsc\n", __func__); pr_err 230 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: unable to enable ahb_clk\n", __func__); pr_err 236 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Invalid version\n", __func__); pr_err 289 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("regulator %d set op mode failed, %d\n", pr_err 298 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("regulator enable failed, %d\n", ret); pr_err 322 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to init regulator, ret=%d\n", pr_err 339 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find src clock. ret=%d\n", pr_err 348 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't get esc clock parent. ret=%d\n", pr_err 356 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't get src clock parent. ret=%d\n", pr_err 371 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find byte_intf clock. ret=%d\n", pr_err 391 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Unable to get %s clock, ret = %d\n", pr_err 401 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find dsi_byte clock. ret=%d\n", pr_err 410 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find dsi_pixel clock. ret=%d\n", pr_err 419 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find dsi_esc clock. ret=%d\n", pr_err 428 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find byte_clk clock. ret=%d\n", __func__, ret); pr_err 435 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't find pixel_clk clock. ret=%d\n", __func__, ret); pr_err 455 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to enable bus clock %d ret %d\n", pr_err 517 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret); pr_err 523 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret); pr_err 531 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate byte intf clk, %d\n", pr_err 539 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi esc clk\n", __func__); pr_err 545 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi byte clk\n", __func__); pr_err 551 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi pixel clk\n", __func__); pr_err 558 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable byte intf clk\n", pr_err 586 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret); pr_err 592 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate esc clk, %d\n", __func__, ret); pr_err 598 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate src clk, %d\n", __func__, ret); pr_err 604 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret); pr_err 610 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi byte clk\n", __func__); pr_err 616 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi esc clk\n", __func__); pr_err 622 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi src clk\n", __func__); pr_err 628 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Failed to enable dsi pixel clk\n", __func__); pr_err 688 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: forcing mdss_dsi lanes to 1\n", __func__); pr_err 705 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: mode not set\n", __func__); pr_err 1156 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: create packet failed, %d\n", __func__, ret); pr_err 1162 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: packet size is too big\n", __func__); pr_err 1169 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: get vaddr failed, %d\n", __func__, ret); pr_err 1207 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: read data does not match with rx_buf len %zu\n", pr_err 1224 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: read data does not match with rx_buf len %zu\n", pr_err 1269 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to get iova: %d\n", __func__, ret); pr_err 1352 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to add cmd type = 0x%x\n", pr_err 1367 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: cmd cannot fit into BLLP period, len=%d\n", pr_err 1374 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d\n", pr_err 1806 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: FAILED: cannot alloc dsi host\n", pr_err 1817 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to parse dt\n", __func__); pr_err 1823 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: unable to map Dsi ctrl base\n", __func__); pr_err 1833 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: get config failed\n", __func__); pr_err 1840 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: unable to identify DSI host index\n", __func__); pr_err 1849 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: regulator init failed\n", __func__); pr_err 1855 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: unable to initialize dsi clks\n", __func__); pr_err 1862 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: alloc rx temp buf failed\n", __func__); pr_err 1931 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret); pr_err 2084 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Set max pkt size failed, %d\n", pr_err 2101 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: Read cmd Tx failed, %d\n", __func__, ret); pr_err 2155 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: rx ACK_ERR_PACLAGE\n", __func__); pr_err 2208 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't set parent to byte_clk_src. ret=%d\n", pr_err 2215 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't set parent to pixel_clk_src. ret=%d\n", pr_err 2223 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't set parent to dsi_clk_src. ret=%d\n", pr_err 2232 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: can't set parent to esc_clk_src. ret=%d\n", pr_err 2265 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: unable to calc clk rate, %d\n", __func__, ret); pr_err 2342 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s:Failed to enable vregs.ret=%d\n", pr_err 2350 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to enable link clocks. ret=%d\n", pr_err 2357 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: failed to set pinctrl default state, %d\n", pr_err 2430 drivers/gpu/drm/msm/dsi/dsi_host.c pr_err("%s: cannot duplicate mode\n", __func__); pr_err 395 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: power on host %d failed, %d\n", __func__, id, ret); pr_err 403 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: power on host1 failed, %d\n", pr_err 415 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: prepare panel %d failed, %d\n", __func__, pr_err 423 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: enable host %d failed, %d\n", __func__, id, ret); pr_err 430 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: enable host1 failed, %d\n", __func__, ret); pr_err 438 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: enable panel %d failed, %d\n", __func__, id, pr_err 502 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: Panel %d OFF failed, %d\n", __func__, id, pr_err 508 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: host %d disable failed, %d\n", __func__, id, ret); pr_err 513 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: host1 disable failed, %d\n", __func__, ret); pr_err 519 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: Panel %d unprepare failed,%d\n", __func__, pr_err 529 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: host %d power off failed,%d\n", __func__, id, ret); pr_err 534 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: host1 power off failed, %d\n", pr_err 745 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: failed to prepare non-trigger host, %d\n", pr_err 752 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: failed to prepare host, %d\n", __func__, ret); pr_err 792 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: invalid id %d\n", __func__, id); pr_err 797 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: dsi%d already registered\n", __func__, id); pr_err 805 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: failed to parse dual DSI info\n", __func__); pr_err 811 drivers/gpu/drm/msm/dsi/dsi_manager.c pr_err("%s: failed to register mipi dsi host for DSI %d\n", pr_err 114 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c pr_err("Ref gen not ready. Aborting\n"); pr_err 360 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c pr_err("DSI PLL(%d) lock failed, status=0x%08x\n", pr_err 416 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c pr_err("vco_set_rate failed, rc=%d\n", rc); pr_err 433 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c pr_err("PLL(%d) lock failed\n", pll_10nm->id); pr_err 39 drivers/gpu/drm/msm/edp/edp.c pr_err("no eDP device\n"); pr_err 129 drivers/gpu/drm/msm/edp/edp_aux.c pr_err("%s: invalid msg: size(%zu), request(%x)\n", pr_err 153 drivers/gpu/drm/msm/edp/edp_aux.c pr_err("%s: aux timeout,\n", __func__); pr_err 207 drivers/gpu/drm/msm/edp/edp_aux.c pr_err("%s: failed to register drm aux: %d\n", __func__, ret); pr_err 151 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Can't find core clock, %d\n", __func__, ret); pr_err 159 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Can't find pixel clock, %d\n", __func__, ret); pr_err 167 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Can't find iface clock, %d\n", __func__, ret); pr_err 175 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Can't find link clock, %d\n", __func__, ret); pr_err 184 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Can't find mdp_core clock, %d\n", __func__, ret); pr_err 201 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to enable ahb clk\n", __func__); pr_err 208 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to set rate aux clk\n", __func__); pr_err 213 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to enable aux clk\n", __func__); pr_err 224 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to set rate to link clk\n", pr_err 231 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to enable link clk\n", __func__); pr_err 241 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to set rate to pixel clk\n", pr_err 248 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to enable pixel clk\n", __func__); pr_err 255 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to enable mdp core clk\n", __func__); pr_err 301 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Could not get vdda reg, ret = %d\n", __func__, pr_err 309 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Could not get lvl-vdd reg, ret = %d\n", __func__, pr_err 324 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__); pr_err 330 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Failed to enable vdda_vreg regulator.\n", __func__); pr_err 336 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("Failed to enable lvl-vdd reg regulator, %d", ret); pr_err 367 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: cannot get panel-hpd-gpios, %d\n", __func__, ret); pr_err 375 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: cannot get panel-en-gpios, %d\n", __func__, ret); pr_err 486 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Set sw/pe to panel failed\n", __func__); pr_err 500 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Set training pattern to panel failed\n", __func__); pr_err 553 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: set link_train=%d failed\n", __func__, train); pr_err 616 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: read link status failed\n", __func__); pr_err 673 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: read link status failed\n", __func__); pr_err 782 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Training 1 failed", __func__); pr_err 800 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Training 2 failed", __func__); pr_err 851 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Invalid link rate, %d\n", __func__, pr_err 1089 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: edp is NULL!\n", __func__); pr_err 1107 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s:regulator init fail\n", __func__); pr_err 1112 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s:clk init fail\n", __func__); pr_err 1117 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s:failed to configure GPIOs: %d", __func__, ret); pr_err 1124 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s:failed to init aux\n", __func__); pr_err 1130 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s:failed to init phy\n", __func__); pr_err 1190 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: AUX channel is NOT ready\n", __func__); pr_err 1230 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: read dpcd cap failed, %d\n", __func__, ret); pr_err 1239 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: edid read fail\n", __func__); pr_err 1277 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s, fail to prepare enable ahb clk\n", __func__); pr_err 1328 drivers/gpu/drm/msm/edp/edp_ctrl.c pr_err("%s: Invalid link rate,%d\n", __func__, ctrl->link_rate); pr_err 29 drivers/gpu/drm/msm/edp/edp_phy.c pr_err("%s: PHY NOT ready\n", __func__); pr_err 132 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: write size too big\n", __func__); pr_err 180 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: error: scm_call ret=%d resp=%u\n", pr_err 269 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: AKSV QFPROM doesn't have 20 1's, 20 0's\n", pr_err 271 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: QFPROM AKSV chk failed (AKSV=%02x%08x)\n", pr_err 466 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: ASKV validation failed\n", __func__); pr_err 611 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Wait key state timedout", __func__); pr_err 633 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Wait An timedout", __func__); pr_err 673 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:An write failed\n", __func__); pr_err 681 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:AKSV write failed\n", __func__); pr_err 699 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:BKSV read failed\n", __func__); pr_err 711 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err(": BKSV doesn't have 20 1's and 20 0's\n"); pr_err 712 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err(": BKSV chk fail. BKSV=%02x%02x%02x%02x%02x\n", pr_err 736 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:BCAPS read failed\n", __func__); pr_err 761 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: wait key and an ready failed\n", __func__); pr_err 768 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: read bcaps error, abort\n", __func__); pr_err 781 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:An/Aksv write failed\n", __func__); pr_err 788 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:BKSV Process failed\n", __func__); pr_err 823 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s:R0' read failed\n", __func__); pr_err 845 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Wait Auth IRQ timeout\n", __func__); pr_err 851 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Authentication Part I failed\n", __func__); pr_err 876 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: BSTATUS read failed\n", __func__); pr_err 893 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: No downstream devices\n", __func__); pr_err 904 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: no. of devs connected exceeds max allowed", pr_err 916 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: no. of cascade conn exceeds max allowed", pr_err 949 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: BCAPS read failed\n", __func__); pr_err 958 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Wait KSV fifo ready timedout", __func__); pr_err 969 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: bstatus error\n", __func__); pr_err 978 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: BSTATUS write failed\n", __func__); pr_err 1013 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Read %s failed\n", __func__, rd->name); pr_err 1038 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: KSV FIFO read failed\n", __func__); pr_err 1081 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Recv ksv fifo timedout", __func__); pr_err 1092 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: transfer V failed\n", __func__); pr_err 1099 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: fail to reset sha engine\n", __func__); pr_err 1196 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: Write KSV fifo timedout", __func__); pr_err 1222 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: HDCP V Match timedout", __func__); pr_err 1242 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: auth prepare failed %d\n", __func__, rc); pr_err 1249 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: key exchange failed %d\n", __func__, rc); pr_err 1255 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: receive r0 failed %d\n", __func__, rc); pr_err 1261 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: verify r0 failed %d\n", __func__, rc); pr_err 1271 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: wait ksv fifo ready failed %d\n", __func__, rc); pr_err 1277 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: recv ksv fifo failed %d\n", __func__, rc); pr_err 1283 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: write ksv fifo failed %d\n", __func__, rc); pr_err 1289 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: check v match failed %d\n", __func__, rc); pr_err 1297 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: hdcp authentication failed\n", __func__); pr_err 1398 drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c pr_err("%s: HDCP is not supported without qfprom\n", pr_err 164 drivers/gpu/drm/msm/msm_drv.c pr_err("IO:R %p %08x\n", addr, val); pr_err 53 drivers/gpu/drm/msm/msm_fbdev.c pr_err("%s:drm_gem_mmap_obj fail\n", __func__); pr_err 235 drivers/gpu/drm/nouveau/dispnv50/disp.c pr_err("nouveau: evo channel stalled\n"); pr_err 82 drivers/gpu/drm/nouveau/dispnv50/disp.h pr_err("%04x %d %s\n", _m, _s, __func__); \ pr_err 89 drivers/gpu/drm/nouveau/dispnv50/disp.h pr_err("\t%08x\n", _d); \ pr_err 45 drivers/gpu/drm/nouveau/nouveau_vga.c pr_err("VGA switcheroo: switched nouveau on\n"); pr_err 50 drivers/gpu/drm/nouveau/nouveau_vga.c pr_err("VGA switcheroo: switched nouveau off\n"); pr_err 34 drivers/gpu/drm/nouveau/nvkm/core/mm.c pr_err("nvkm: %s\n", header); pr_err 35 drivers/gpu/drm/nouveau/nvkm/core/mm.c pr_err("nvkm: node list:\n"); pr_err 37 drivers/gpu/drm/nouveau/nvkm/core/mm.c pr_err("nvkm: \t%08x %08x %d\n", pr_err 40 drivers/gpu/drm/nouveau/nvkm/core/mm.c pr_err("nvkm: free list:\n"); pr_err 42 drivers/gpu/drm/nouveau/nvkm/core/mm.c pr_err("nvkm: \t%08x %08x %d\n", pr_err 40 drivers/gpu/drm/omapdrm/dss/dss.h pr_err("omapdss " DSS_SUBSYS_NAME " error: " format, ##__VA_ARGS__) pr_err 43 drivers/gpu/drm/omapdrm/dss/dss.h pr_err("omapdss error: " format, ##__VA_ARGS__) pr_err 194 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c pr_err("cec-%s: could not clear TX FIFO\n", adap->name); pr_err 201 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c pr_err("cec-%s: could not clear RX FIFO\n", adap->name); pr_err 287 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c pr_err("cec-%s: could not clear TX FIFO for transmit\n", pr_err 117 drivers/gpu/drm/qxl/qxl_kms.c pr_err("Unable to init drm dev"); pr_err 138 drivers/gpu/drm/qxl/qxl_kms.c pr_err("Unable to create vram_mapping"); pr_err 161 drivers/gpu/drm/qxl/qxl_kms.c pr_err("Unable to create surface_mapping"); pr_err 180 drivers/gpu/drm/qxl/qxl_kms.c pr_err("Unable to ioremap ROM\n"); pr_err 160 drivers/gpu/drm/r128/r128_cce.c pr_err("r128_cce: Failed to register firmware\n"); pr_err 166 drivers/gpu/drm/r128/r128_cce.c pr_err("r128_cce: Failed to load firmware \"%s\"\n", pr_err 172 drivers/gpu/drm/r128/r128_cce.c pr_err("r128_cce: Bogus length %zu in firmware \"%s\"\n", pr_err 2075 drivers/gpu/drm/radeon/cik.c pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 2083 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2099 drivers/gpu/drm/radeon/cik.c pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 2106 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2122 drivers/gpu/drm/radeon/cik.c pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 2129 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2145 drivers/gpu/drm/radeon/cik.c pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 2152 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2183 drivers/gpu/drm/radeon/cik.c pr_err("cik_rlc: Bogus length %zu in firmware \"%s\"\n", pr_err 2190 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2206 drivers/gpu/drm/radeon/cik.c pr_err("cik_sdma: Bogus length %zu in firmware \"%s\"\n", pr_err 2213 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2236 drivers/gpu/drm/radeon/cik.c pr_err("cik_mc: Bogus length %zu in firmware \"%s\"\n", pr_err 2244 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2261 drivers/gpu/drm/radeon/cik.c pr_err("smc: error loading firmware \"%s\"\n", pr_err 2267 drivers/gpu/drm/radeon/cik.c pr_err("cik_smc: Bogus length %zu in firmware \"%s\"\n", pr_err 2274 drivers/gpu/drm/radeon/cik.c pr_err("cik_fw: validation failed for firmware \"%s\"\n", pr_err 2286 drivers/gpu/drm/radeon/cik.c pr_err("ci_fw: mixing new and old firmware!\n"); pr_err 2295 drivers/gpu/drm/radeon/cik.c pr_err("cik_cp: Failed to load firmware \"%s\"\n", pr_err 1064 drivers/gpu/drm/radeon/evergreen_cs.c pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx); pr_err 780 drivers/gpu/drm/radeon/ni.c pr_err("ni_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 791 drivers/gpu/drm/radeon/ni.c pr_err("ni_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 801 drivers/gpu/drm/radeon/ni.c pr_err("ni_rlc: Bogus length %zu in firmware \"%s\"\n", pr_err 813 drivers/gpu/drm/radeon/ni.c pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n", pr_err 823 drivers/gpu/drm/radeon/ni.c pr_err("smc: error loading firmware \"%s\"\n", fw_name); pr_err 828 drivers/gpu/drm/radeon/ni.c pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n", pr_err 837 drivers/gpu/drm/radeon/ni.c pr_err("ni_cp: Failed to load firmware \"%s\"\n", pr_err 1051 drivers/gpu/drm/radeon/r100.c pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name); pr_err 1053 drivers/gpu/drm/radeon/r100.c pr_err("radeon_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 1886 drivers/gpu/drm/radeon/r100.c pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx); pr_err 540 drivers/gpu/drm/radeon/r200.c pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx); pr_err 1171 drivers/gpu/drm/radeon/r300.c pr_err("Forbidden register 0x%04X in cs at %d (val=%08x)\n", pr_err 2559 drivers/gpu/drm/radeon/r600.c pr_err("r600_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 2570 drivers/gpu/drm/radeon/r600.c pr_err("r600_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 2580 drivers/gpu/drm/radeon/r600.c pr_err("r600_rlc: Bogus length %zu in firmware \"%s\"\n", pr_err 2589 drivers/gpu/drm/radeon/r600.c pr_err("smc: error loading firmware \"%s\"\n", fw_name); pr_err 2594 drivers/gpu/drm/radeon/r600.c pr_err("smc: Bogus length %zu in firmware \"%s\"\n", pr_err 2603 drivers/gpu/drm/radeon/r600.c pr_err("r600_cp: Failed to load firmware \"%s\"\n", pr_err 935 drivers/gpu/drm/radeon/r600_cs.c pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx); pr_err 155 drivers/gpu/drm/radeon/radeon_fb.c pr_err("failed to allocate framebuffer (%d)\n", aligned_size); pr_err 122 drivers/gpu/drm/radeon/radeon_gem.c pr_err("Failed to wait for object: %li\n", r); pr_err 1793 drivers/gpu/drm/radeon/si.c pr_err("si_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 1801 drivers/gpu/drm/radeon/si.c pr_err("si_cp: validation failed for firmware \"%s\"\n", pr_err 1817 drivers/gpu/drm/radeon/si.c pr_err("si_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 1824 drivers/gpu/drm/radeon/si.c pr_err("si_cp: validation failed for firmware \"%s\"\n", pr_err 1840 drivers/gpu/drm/radeon/si.c pr_err("si_cp: Bogus length %zu in firmware \"%s\"\n", pr_err 1847 drivers/gpu/drm/radeon/si.c pr_err("si_cp: validation failed for firmware \"%s\"\n", pr_err 1863 drivers/gpu/drm/radeon/si.c pr_err("si_rlc: Bogus length %zu in firmware \"%s\"\n", pr_err 1870 drivers/gpu/drm/radeon/si.c pr_err("si_cp: validation failed for firmware \"%s\"\n", pr_err 1894 drivers/gpu/drm/radeon/si.c pr_err("si_mc: Bogus length %zu in firmware \"%s\"\n", pr_err 1902 drivers/gpu/drm/radeon/si.c pr_err("si_cp: validation failed for firmware \"%s\"\n", pr_err 1921 drivers/gpu/drm/radeon/si.c pr_err("smc: error loading firmware \"%s\"\n", fw_name); pr_err 1926 drivers/gpu/drm/radeon/si.c pr_err("si_smc: Bogus length %zu in firmware \"%s\"\n", pr_err 1933 drivers/gpu/drm/radeon/si.c pr_err("si_cp: validation failed for firmware \"%s\"\n", pr_err 1944 drivers/gpu/drm/radeon/si.c pr_err("si_fw: mixing new and old firmware!\n"); pr_err 1952 drivers/gpu/drm/radeon/si.c pr_err("si_cp: Failed to load firmware \"%s\"\n", pr_err 102 drivers/gpu/drm/selftests/drm_selftest.c pr_err("%s: %s failed with error %d\n", pr_err 56 drivers/gpu/drm/selftests/test-drm_damage_helper.c pr_err("Cannot have damage clip with no dimension.\n"); pr_err 61 drivers/gpu/drm/selftests/test-drm_damage_helper.c pr_err("Damage cannot be outside rounded plane src.\n"); pr_err 66 drivers/gpu/drm/selftests/test-drm_damage_helper.c pr_err("Damage = %d %d %d %d\n", r->x1, r->y1, r->x2, r->y2); pr_err 63 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Expected to find no holes (after reserve), found %lu instead\n", count); pr_err 69 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Hole follows node, expected none!\n"); pr_err 91 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("empty mm has incorrect hole, found (%llx, %llx), expect (%llx, %llx)\n", pr_err 99 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Expected to find one hole, found %lu instead\n", count); pr_err 119 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node[%ld] list out of order, expected %llx found %llx\n", pr_err 125 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node[%ld].size incorrect, expected %llx, found %llx\n", pr_err 131 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node[%ld] is followed by a hole!\n", n); pr_err 138 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("lookup return wrong node, expected start %llx, found %llx\n", pr_err 145 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("lookup failed for node %llx + %llx\n", pr_err 174 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node not allocated\n"); pr_err 179 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node has wrong size, found %llu, expected %llu\n", pr_err 185 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node is misaligned, start %llx rem %llu, expected alignment %llu\n", pr_err 191 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node has wrong color, found %lu, expected %lu\n", pr_err 213 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("zeroed mm claims to be initialized\n"); pr_err 220 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("mm claims not to be initialized\n"); pr_err 225 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("mm not empty on creation\n"); pr_err 240 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("failed to reserve whole drm_mm\n"); pr_err 281 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("failed to reserve node[0] {start=%lld, size=%lld)\n", pr_err 290 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("failed to reserve node[1] {start=%lld, size=%lld)\n", pr_err 316 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("impossible reserve succeeded, node %llu + %llu\n", pr_err 320 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("impossible reserve failed with wrong error %d [expected %d], node %llu + %llu\n", pr_err 362 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("boundary[%d:%s] failed, count=%u, size=%lld\n", pr_err 409 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("reserve failed, step %d, start %llu\n", pr_err 416 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("reserved node not allocated! step %d, start %llu\n", pr_err 440 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("reserve failed, step %d, start %llu\n", pr_err 474 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("reserve failed, step %d/%d, start %llu\n", pr_err 535 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert (size=%llu, alignment=%llu, color=%lu, mode=%s) failed with err=%d\n", pr_err 558 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("impossible insert succeeded, node %llu + %llu\n", pr_err 562 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("impossible insert failed with wrong error %d [expected %d], size %llu\n", pr_err 601 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s insert failed, size %llu step %d\n", pr_err 609 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("replaced old-node still allocated! step %d\n", pr_err 615 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("replaced node did not inherit parameters, size %llu step %d\n", pr_err 621 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("replaced node mismatch location expected [%llx + %llx], found [%llx + %llx]\n", pr_err 643 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s reinsert failed, size %llu step %d\n", pr_err 649 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s reinsert node moved, step %d, expected %llx, found %llx\n", pr_err 668 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s multiple reinsert failed, size %llu step %d\n", pr_err 774 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert (size=%llu, alignment=%llu, color=%lu, mode=%s) nto range [%llx, %llx] failed with err=%d\n", pr_err 804 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("impossible insert succeeded, node %llx + %llu, range [%llx, %llx]\n", pr_err 808 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("impossible insert failed with wrong error %d [expected %d], size %llu, range [%llx, %llx]\n", pr_err 829 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node %d out of range, address [%llx + %llu], range [%llx, %llx]\n", pr_err 835 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node %d out of order, expected start %llx, found %llx\n", pr_err 841 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node %d has wrong size, expected size %llx, found %llx\n", pr_err 848 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node %d is followed by a hole!\n", n); pr_err 858 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node before start: node=%llx+%llu, start=%llx\n", pr_err 867 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node after end: node=%llx+%llu, end=%llx\n", pr_err 908 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s insert failed, size %llu, step %d [%d, %d], range [%llx, %llx]\n", pr_err 917 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s: range [%llx, %llx] not full after initialisation, size=%llu\n", pr_err 930 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s reinsert failed, step %d\n", mode->name, n); pr_err 935 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s reinsert node moved, step %d, expected %llx, found %llx\n", pr_err 942 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s: range [%llx, %llx] not full after reinsertion, size=%llu\n", pr_err 1065 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s insert failed with alignment=%d", pr_err 1115 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed with alignment=%llx [%d]", pr_err 1208 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Failed to find eviction: size=%lld [avail=%d], align=%lld (color=%lu)\n", pr_err 1226 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("drm_mm_scan_color_evict unexpectedly reported overlapping nodes!\n"); pr_err 1257 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node[%d] no longer allocated!\n", n); pr_err 1273 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node[%d] no longer connected!\n", n); pr_err 1303 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Node %lld not marked for eviction!\n", pr_err 1321 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Failed to reinsert node after eviction: start=%llx\n", pr_err 1358 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Failed to insert into eviction hole: size=%d, align=%d\n", pr_err 1366 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Inserted [address=%llu + %llu] did not fit into the request range [%llu, %llu]\n", pr_err 1373 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Inserted did not fill the eviction hole: size=%lld [%d], align=%d [rem=%lld], start=%llx, hole-follows?=%d\n", pr_err 1387 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Failed to reinsert node after eviction: start=%llx\n", pr_err 1394 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("range is no longer continuous\n"); pr_err 1433 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d\n", n); pr_err 1441 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("evict_nothing() failed\n"); pr_err 1445 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("evict_everything() failed\n"); pr_err 1457 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_something(size=%u) failed\n", pr_err 1471 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_something(size=%u, alignment=%u) failed\n", pr_err 1489 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_something(size=%u, alignment=%u) failed\n", pr_err 1543 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d\n", n); pr_err 1557 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_something(size=%u) failed with range [%u, %u]\n", pr_err 1570 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_something(size=%u, alignment=%u) failed with range [%u, %u]\n", pr_err 1587 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_something(size=%u, alignment=%u) failed with range [%u, %u]\n", pr_err 1650 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, size %u step %d\n", size, n); pr_err 1655 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("hole after topdown insert %d, start=%llx\n, size=%u", pr_err 1682 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d/%d\n", m, n); pr_err 1687 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("hole after topdown insert %d/%d, start=%llx\n", pr_err 1694 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node %d/%d, size %d, not inserted into upmost hole, expected %d, found %d\n", pr_err 1763 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("bottomup insert failed, size %u step %d\n", size, n); pr_err 1789 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d/%d\n", m, n); pr_err 1795 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("node %d/%d not inserted into bottom hole, expected %d, found %d\n", pr_err 1840 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Could not reserve low node\n"); pr_err 1849 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Could not reserve low node\n"); pr_err 1854 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Expected a hole after lo and high nodes!\n"); pr_err 1864 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Unexpectedly inserted the node into the wrong hole: node.start=%llx\n", pr_err 1872 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Could not insert the node into the available hole!\n"); pr_err 1915 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("colors abutt; %ld [%llx + %llx] is next to %ld [%llx + %llx]!\n", pr_err 1954 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d\n", n); pr_err 1962 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("invalid color stored: expected %lld, found %ld\n", pr_err 1988 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("initial reserve failed!\n"); pr_err 2010 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("reserve %d did not report color overlap! err=%d\n", pr_err 2021 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("reserve %d failed, err=%d\n", n, err); pr_err 2039 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s insert failed, step %d\n", pr_err 2050 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s invalid color stored: expected %lld, found %ld\n", pr_err 2061 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s colored node misaligned, start=%llx expected alignment=%lld [rem=%lld]\n", pr_err 2112 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Failed to insert into eviction hole: size=%d, align=%d, color=%lu, err=%d\n", pr_err 2120 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Inserted [address=%llu + %llu] did not fit into the request range [%llu, %llu]\n", pr_err 2129 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Inserted did not fit the eviction hole: size=%lld [%d], align=%d [rem=%lld], start=%llx\n", pr_err 2142 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("Failed to reinsert node after eviction: start=%llx\n", pr_err 2186 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d\n", n); pr_err 2199 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_color(size=%u) failed\n", pr_err 2212 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_color(size=%u, alignment=%u) failed\n", pr_err 2229 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_color(size=%u, alignment=%u) failed\n", pr_err 2287 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("insert failed, step %d\n", n); pr_err 2300 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_color(size=%u) failed for range [%x, %x]\n", pr_err 2313 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_color(size=%u, alignment=%u) failed for range [%x, %x]\n", pr_err 2330 drivers/gpu/drm/selftests/test-drm_mm.c pr_err("%s evict_color(size=%u, alignment=%u) failed for range [%x, %x]\n", pr_err 9 drivers/gpu/drm/selftests/test-drm_modeset_common.h pr_err("%s/%u: " msg, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ pr_err 29 drivers/gpu/drm/selftests/test-drm_plane_helper.c pr_err("src x coordinate %x should never be below 0.\n", plane_state->src.x1); pr_err 34 drivers/gpu/drm/selftests/test-drm_plane_helper.c pr_err("src y coordinate %x should never be below 0.\n", plane_state->src.y1); pr_err 120 drivers/gpu/drm/tegra/hub.c pr_err("failed to assert reset for window group %u\n", pr_err 265 drivers/gpu/drm/tilcdc/tilcdc_panel.c pr_err("%s: no devicenode given\n", __func__); pr_err 271 drivers/gpu/drm/tilcdc/tilcdc_panel.c pr_err("%s: could not find panel-info node\n", __func__); pr_err 294 drivers/gpu/drm/tilcdc/tilcdc_panel.c pr_err("%s: error reading panel-info properties\n", __func__); pr_err 80 drivers/gpu/drm/ttm/ttm_agp_backend.c pr_err("AGP Bind memory failed\n"); pr_err 397 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Can not flush read caches\n"); pr_err 739 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Failed to find memory space for buffer 0x%p eviction\n", pr_err 749 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Buffer eviction failed\n"); pr_err 1167 drivers/gpu/drm/ttm/ttm_bo.c pr_err(TTM_PFX "No compatible memory type found\n"); pr_err 1306 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Out of kernel memory\n"); pr_err 1316 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Illegal buffer object size\n"); pr_err 1536 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Illegal memory type %d\n", mem_type); pr_err 1542 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Trying to take down uninitialized memory manager type %u\n", pr_err 1554 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Cleanup eviction failed\n"); pr_err 1573 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Illegal memory manager memory type %u\n", mem_type); pr_err 1578 drivers/gpu/drm/ttm/ttm_bo.c pr_err("Memory type %u has not been initialized\n", mem_type); pr_err 1699 drivers/gpu/drm/ttm/ttm_bo.c pr_err("DRM memory manager type %d is not clean\n", pr_err 66 drivers/gpu/drm/ttm/ttm_bo_util.c pr_err("Failed to expire sync object before unbinding TTM\n"); pr_err 422 drivers/gpu/drm/ttm/ttm_bo_vm.c pr_err("Could not find buffer object to map\n"); pr_err 173 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Setting allocation size to %lu is not allowed. Recommended size is %lu\n", pr_err 254 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Failed to set %d pages to wb!\n", npages); pr_err 260 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Failed to set %d pages to wb!\n", pages_nr); pr_err 451 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Failed to set %d pages to uc!\n", cpages); pr_err 456 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Failed to set %d pages to wc!\n", cpages); pr_err 745 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Erroneous page count. Leaking pages.\n"); pr_err 801 drivers/gpu/drm/ttm/ttm_page_alloc.c pr_err("Erroneous page count. Leaking pages.\n"); pr_err 222 drivers/gpu/drm/ttm/ttm_page_alloc_dma.c pr_err("Setting allocation size to %lu is not allowed. Recommended size is %lu\n", pr_err 274 drivers/gpu/drm/ttm/ttm_page_alloc_dma.c pr_err("%s: Failed to set %d pages to uc!\n", pr_err 280 drivers/gpu/drm/ttm/ttm_page_alloc_dma.c pr_err("%s: Failed to set %d pages to wc!\n", pr_err 362 drivers/gpu/drm/ttm/ttm_page_alloc_dma.c pr_err("%s: Failed to set %d pages to wb!\n", pr_err 385 drivers/gpu/drm/ttm/ttm_page_alloc_dma.c pr_err("%s: Failed to set %d pages to wb!\n", pr_err 71 drivers/gpu/drm/ttm/ttm_tt.c pr_err("Illegal buffer object type\n"); pr_err 245 drivers/gpu/drm/ttm/ttm_tt.c pr_err("Failed allocating page table\n"); pr_err 269 drivers/gpu/drm/ttm/ttm_tt.c pr_err("Failed allocating page table\n"); pr_err 291 drivers/gpu/drm/ttm/ttm_tt.c pr_err("Failed allocating page table\n"); pr_err 406 drivers/gpu/drm/ttm/ttm_tt.c pr_err("Failed allocating swap storage\n"); pr_err 784 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c pr_err("Invalid fence object handle 0x%08lx.\n", pr_err 790 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c pr_err("Invalid fence object handle 0x%08lx.\n", pr_err 222 drivers/gpu/host1x/job.c pr_err("Could not map cmdbuf for relocation\n"); pr_err 767 drivers/gpu/vga/vga_switcheroo.c pr_err("client %x refused switch\n", client->id); pr_err 878 drivers/gpu/vga/vga_switcheroo.c pr_err("switching failed stage 1 %d\n", ret); pr_err 882 drivers/gpu/vga/vga_switcheroo.c pr_err("switching failed stage 2 %d\n", ret); pr_err 891 drivers/gpu/vga/vga_switcheroo.c pr_err("delayed switching stage 1 failed %d\n", ret); pr_err 956 drivers/gpu/vga/vga_switcheroo.c pr_err("delayed switching failed stage 2 %d\n", ret); pr_err 1542 drivers/gpu/vga/vgaarb.c pr_err("error %d registering device\n", rc); pr_err 311 drivers/greybus/core.c pr_err("bus_register failed (%d)\n", retval); pr_err 317 drivers/greybus/core.c pr_err("gb_hd_init failed (%d)\n", retval); pr_err 323 drivers/greybus/core.c pr_err("gb_operation_init failed (%d)\n", retval); pr_err 58 drivers/greybus/svc_watchdog.c pr_err("svc_watchdog: calling \"%s %s\" to reset greybus network!\n", pr_err 2583 drivers/hid/hid-core.c pr_err("can't register hid bus\n"); pr_err 480 drivers/hid/hid-debug.c pr_err("error allocating HID debug buffer\n"); pr_err 308 drivers/hid/hid-hyperv.c pr_err("unsupported hid msg type - type %d len %d\n", pr_err 330 drivers/hid/hid-hyperv.c pr_err("Unhandled packet type %d, tid %llx len %d\n", pr_err 373 drivers/hid/hid-hyperv.c pr_err("synthhid protocol request failed (version %d)\n", pr_err 31 drivers/hid/hid-prodikeys.c pr_err("hid-prodikeys: " format "\n" , ## arg) pr_err 883 drivers/hid/usbhid/hid-pidff.c pr_err("logical_minimum is not 1 as it should be\n"); pr_err 181 drivers/hid/usbhid/usbkbd.c pr_err("usb_submit_urb(leds) failed\n"); pr_err 762 drivers/hsi/clients/hsi_char.c pr_err("Invalid max read/write data size\n"); pr_err 768 drivers/hsi/clients/hsi_char.c pr_err("Error while registering HSI/SSI driver %d\n", ret); pr_err 103 drivers/hsi/hsi_core.c pr_err("hsi: failed to register client: %s\n", info->name); pr_err 297 drivers/hsi/hsi_core.c pr_err("hsi: failed to register client: %s\n", name); pr_err 309 drivers/hsi/hsi_core.c pr_err("hsi client: missing or incorrect of property: err=%d\n", err); pr_err 508 drivers/hv/channel.c pr_err("Failed to establish GPADL: err = 0x%x\n", pr_err 663 drivers/hv/channel.c pr_err("Close failed: close post msg return is %d\n", ret); pr_err 675 drivers/hv/channel.c pr_err("Close failed: teardown gpadl return %d\n", ret); pr_err 500 drivers/hv/channel_mgmt.c pr_err("unable to add child device object (relid %d)\n", pr_err 990 drivers/hv/channel_mgmt.c pr_err("Unable to allocate channel object\n"); pr_err 1376 drivers/hv/channel_mgmt.c pr_err("Received invalid channel message type %d size %d\n", pr_err 1386 drivers/hv/channel_mgmt.c pr_err("Unhandled channel message type %d\n", hdr->msgtype); pr_err 1414 drivers/hv/channel_mgmt.c pr_err("Unable to request offers - %d\n", ret); pr_err 271 drivers/hv/connection.c pr_err("Unable to connect to host\n"); pr_err 439 drivers/hv/connection.c pr_err("hv_post_msg() failed; error code:%d\n", ret); pr_err 92 drivers/hv/hv.c pr_err("Unable to allocate NUMA map\n"); pr_err 105 drivers/hv/hv.c pr_err("Unable to allocate SYNIC message page\n"); pr_err 111 drivers/hv/hv.c pr_err("Unable to allocate SYNIC event page\n"); pr_err 117 drivers/hv/hv.c pr_err("Unable to allocate post msg page\n"); pr_err 737 drivers/hv/hv_balloon.c pr_err("hot_add memory failed error is %d\n", ret); pr_err 1057 drivers/hv/hv_balloon.c pr_err("Memory hot add failed\n"); pr_err 1335 drivers/hv/hv_balloon.c pr_err("Balloon response failed\n"); pr_err 1466 drivers/hv/hv_balloon.c pr_err("Capabilities not accepted by host\n"); pr_err 540 drivers/hv/hv_util.c pr_err("cannot register PTP clock: %ld\n", pr_err 895 drivers/hv/vmbus_drv.c pr_err("probe failed for device %s (%d)\n", pr_err 899 drivers/hv/vmbus_drv.c pr_err("probe not set for driver %s\n", pr_err 1364 drivers/hv/vmbus_drv.c pr_err("Unable to initialize the hypervisor - 0x%x\n", ret); pr_err 1407 drivers/hv/vmbus_drv.c pr_err("Hyper-V: sysctl table register error"); pr_err 1419 drivers/hv/vmbus_drv.c pr_err("Hyper-V: kmsg dump register " pr_err 1426 drivers/hv/vmbus_drv.c pr_err("Hyper-V: panic message page memory " pr_err 1811 drivers/hv/vmbus_drv.c pr_err("Unable to allocate device object for child device\n"); pr_err 1844 drivers/hv/vmbus_drv.c pr_err("Unable to register child device\n"); pr_err 1858 drivers/hv/vmbus_drv.c pr_err("Unable to register primary channeln"); pr_err 2229 drivers/hv/vmbus_drv.c pr_err("hv_sock channel not rescinded!\n"); pr_err 2237 drivers/hv/vmbus_drv.c pr_err("Sub-channel not deleted!\n"); pr_err 2267 drivers/hv/vmbus_drv.c pr_err("Invalid proto version = 0x%x\n", vmbus_proto_version); pr_err 602 drivers/hwmon/abituguru.c pr_err("Fatal error could not restore original settings. %s %s\n", pr_err 1396 drivers/hwmon/abituguru.c pr_err("Fatal error ran out of space for sysfs attr names. %s %s", pr_err 1595 drivers/hwmon/abituguru.c pr_err("Device allocation failed\n"); pr_err 1606 drivers/hwmon/abituguru.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1612 drivers/hwmon/abituguru.c pr_err("Device addition failed (%d)\n", err); pr_err 993 drivers/hwmon/abituguru3.c pr_err("error unknown motherboard ID: %04X. %s\n", pr_err 1008 drivers/hwmon/abituguru3.c pr_err("Fatal error motherboard has more sensors then ABIT_UGURU3_MAX_NO_SENSORS. %s %s\n", pr_err 1031 drivers/hwmon/abituguru3.c pr_err("Fatal error ran out of space for sysfs attr names. %s %s\n", pr_err 1266 drivers/hwmon/abituguru3.c pr_err("Device allocation failed\n"); pr_err 1277 drivers/hwmon/abituguru3.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1283 drivers/hwmon/abituguru3.c pr_err("Device addition failed (%d)\n", err); pr_err 235 drivers/hwmon/adt7470.c pr_err("ha ha, interrupted\n"); pr_err 1372 drivers/hwmon/asus_atk0110.c pr_err("Resources not safely usable due to acpi_enforce_resources kernel parameter\n"); pr_err 417 drivers/hwmon/coretemp.c pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n"); pr_err 915 drivers/hwmon/dell-smm-hwmon.c pr_err("hwmon registration failed (%d)\n", err); pr_err 1182 drivers/hwmon/dell-smm-hwmon.c pr_err("unable to get SMM Dell signature\n"); pr_err 2568 drivers/hwmon/dme1737.c pr_err("Base address not set\n"); pr_err 2600 drivers/hwmon/dme1737.c pr_err("Failed to allocate device\n"); pr_err 2607 drivers/hwmon/dme1737.c pr_err("Failed to add device resource (err = %d)\n", err); pr_err 2613 drivers/hwmon/dme1737.c pr_err("Failed to add device (err = %d)\n", err); pr_err 1518 drivers/hwmon/f71805f.c pr_err("Device allocation failed\n"); pr_err 1529 drivers/hwmon/f71805f.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1536 drivers/hwmon/f71805f.c pr_err("Platform data allocation failed\n"); pr_err 1542 drivers/hwmon/f71805f.c pr_err("Device addition failed (%d)\n", err); pr_err 1122 drivers/hwmon/f71882fg.c pr_err("I/O address 0x%04x already in use\n", base); pr_err 2733 drivers/hwmon/f71882fg.c pr_err("Device resource addition failed\n"); pr_err 2740 drivers/hwmon/f71882fg.c pr_err("Platform data allocation failed\n"); pr_err 2746 drivers/hwmon/f71882fg.c pr_err("Device addition failed\n"); pr_err 433 drivers/hwmon/fam15h_power.c pr_err("Failed to read max compute unit power accumulator MSR\n"); pr_err 923 drivers/hwmon/hwmon.c pr_err("couldn't register hwmon sysfs class\n"); pr_err 1065 drivers/hwmon/ibmaem.c pr_err("Can't register aem driver\n"); pr_err 3273 drivers/hwmon/it87.c pr_err("Device resource addition failed (%d)\n", err); pr_err 3280 drivers/hwmon/it87.c pr_err("Platform data allocation failed\n"); pr_err 3286 drivers/hwmon/it87.c pr_err("Device addition failed (%d)\n", err); pr_err 930 drivers/hwmon/lm78.c pr_err("Device allocation failed\n"); pr_err 936 drivers/hwmon/lm78.c pr_err("Device resource addition failed (%d)\n", err); pr_err 942 drivers/hwmon/lm78.c pr_err("Device addition failed (%d)\n", err); pr_err 1367 drivers/hwmon/nct6683.c pr_err("EC base I/O port unconfigured\n"); pr_err 4790 drivers/hwmon/nct6775.c pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); pr_err 333 drivers/hwmon/ntc_thermistor.c pr_err("read channel() error: %d\n", ret); pr_err 1692 drivers/hwmon/pc87360.c pr_err("Device allocation failed\n"); pr_err 1715 drivers/hwmon/pc87360.c pr_err("Device resources addition failed (%d)\n", err); pr_err 1721 drivers/hwmon/pc87360.c pr_err("Device addition failed (%d)\n", err); pr_err 1163 drivers/hwmon/pc87427.c pr_err("Device allocation failed\n"); pr_err 1169 drivers/hwmon/pc87427.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1176 drivers/hwmon/pc87427.c pr_err("Platform data allocation failed\n"); pr_err 1182 drivers/hwmon/pc87427.c pr_err("Device addition failed (%d)\n", err); pr_err 475 drivers/hwmon/sch5627.c pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", pr_err 487 drivers/hwmon/sch5627.c pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", pr_err 499 drivers/hwmon/sch5627.c pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", pr_err 533 drivers/hwmon/sch5627.c pr_err("hardware monitoring not enabled\n"); pr_err 414 drivers/hwmon/sch5636.c pr_err("Could not read Fujitsu id byte at %#x\n", pr_err 424 drivers/hwmon/sch5636.c pr_err("Unknown Fujitsu id: %02x%02x%02x\n", pr_err 75 drivers/hwmon/sch56xx-common.c pr_err("I/O address 0x%04x already in use\n", base); pr_err 148 drivers/hwmon/sch56xx-common.c pr_err("Max retries exceeded reading virtual register 0x%04hx (%d)\n", pr_err 169 drivers/hwmon/sch56xx-common.c pr_err("Max retries exceeded reading virtual register 0x%04hx (%d)\n", pr_err 443 drivers/hwmon/sch56xx-common.c pr_err("Registering watchdog chardev: %d\n", err); pr_err 534 drivers/hwmon/sch56xx-common.c pr_err("Device resource addition failed\n"); pr_err 540 drivers/hwmon/sch56xx-common.c pr_err("Device addition failed\n"); pr_err 779 drivers/hwmon/sis5595.c pr_err("Device allocation failed\n"); pr_err 785 drivers/hwmon/sis5595.c pr_err("Device resource addition failed (%d)\n", err); pr_err 791 drivers/hwmon/sis5595.c pr_err("Device addition failed (%d)\n", err); pr_err 266 drivers/hwmon/smsc47b397.c pr_err("Device allocation failed\n"); pr_err 272 drivers/hwmon/smsc47b397.c pr_err("Device resource addition failed (%d)\n", err); pr_err 278 drivers/hwmon/smsc47b397.c pr_err("Device addition failed (%d)\n", err); pr_err 878 drivers/hwmon/smsc47m1.c pr_err("Device allocation failed\n"); pr_err 884 drivers/hwmon/smsc47m1.c pr_err("Device resource addition failed (%d)\n", err); pr_err 891 drivers/hwmon/smsc47m1.c pr_err("Platform data allocation failed\n"); pr_err 897 drivers/hwmon/smsc47m1.c pr_err("Device addition failed (%d)\n", err); pr_err 222 drivers/hwmon/via-cputemp.c pr_err("Device allocation failed\n"); pr_err 234 drivers/hwmon/via-cputemp.c pr_err("Device addition failed (%d)\n", err); pr_err 834 drivers/hwmon/via686a.c pr_err("Device allocation failed\n"); pr_err 840 drivers/hwmon/via686a.c pr_err("Device resource addition failed (%d)\n", err); pr_err 846 drivers/hwmon/via686a.c pr_err("Device addition failed (%d)\n", err); pr_err 1247 drivers/hwmon/vt1211.c pr_err("Device allocation failed (%d)\n", err); pr_err 1258 drivers/hwmon/vt1211.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1264 drivers/hwmon/vt1211.c pr_err("Device addition failed (%d)\n", err); pr_err 957 drivers/hwmon/vt8231.c pr_err("Device allocation failed\n"); pr_err 963 drivers/hwmon/vt8231.c pr_err("Device resource addition failed (%d)\n", err); pr_err 969 drivers/hwmon/vt8231.c pr_err("Device addition failed (%d)\n", err); pr_err 2773 drivers/hwmon/w83627ehf.c pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); pr_err 2825 drivers/hwmon/w83627ehf.c pr_err("Device allocation failed\n"); pr_err 2832 drivers/hwmon/w83627ehf.c pr_err("Platform data allocation failed\n"); pr_err 2848 drivers/hwmon/w83627ehf.c pr_err("Device resource addition failed (%d)\n", err); pr_err 2855 drivers/hwmon/w83627ehf.c pr_err("Device addition failed (%d)\n", err); pr_err 1934 drivers/hwmon/w83627hf.c pr_err("Device allocation failed\n"); pr_err 1940 drivers/hwmon/w83627hf.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1947 drivers/hwmon/w83627hf.c pr_err("Platform data allocation failed\n"); pr_err 1953 drivers/hwmon/w83627hf.c pr_err("Device addition failed (%d)\n", err); pr_err 1942 drivers/hwmon/w83781d.c pr_err("Device allocation failed\n"); pr_err 1948 drivers/hwmon/w83781d.c pr_err("Device resource addition failed (%d)\n", err); pr_err 1954 drivers/hwmon/w83781d.c pr_err("Device addition failed (%d)\n", err); pr_err 431 drivers/hwspinlock/hwspinlock_core.c pr_err("hwspinlock id %d already exists!\n", id); pr_err 456 drivers/hwspinlock/hwspinlock_core.c pr_err("hwspinlock %d still in use (or not present)\n", id); pr_err 462 drivers/hwspinlock/hwspinlock_core.c pr_err("failed to delete hwspinlock %d\n", id); pr_err 494 drivers/hwspinlock/hwspinlock_core.c pr_err("invalid parameters\n"); pr_err 686 drivers/hwspinlock/hwspinlock_core.c pr_err("invalid hwlock\n"); pr_err 805 drivers/hwspinlock/hwspinlock_core.c pr_err("invalid hwlock\n"); pr_err 48 drivers/hwspinlock/qcom_hwspinlock.c pr_err("%s: unable to query spinlock owner\n", __func__); pr_err 53 drivers/hwspinlock/qcom_hwspinlock.c pr_err("%s: spinlock not owned by us (actual owner is %d)\n", pr_err 59 drivers/hwspinlock/qcom_hwspinlock.c pr_err("%s: failed to unlock spinlock\n", __func__); pr_err 493 drivers/hwtracing/coresight/coresight-cpu-debug.c pr_err("%s: unable to %s debug function: %d\n", pr_err 539 drivers/hwtracing/coresight/coresight-cpu-debug.c pr_err("%s: unable to register notifier: %d\n", pr_err 504 drivers/hwtracing/coresight/coresight-tmc.c pr_err("%s: Unsupported TMC config\n", desc.name); pr_err 779 drivers/hwtracing/coresight/coresight.c pr_err("building path(s) failed\n"); pr_err 66 drivers/hwtracing/stm/ftrace.c pr_err("Failed to register stm_source - ftrace.\n"); pr_err 560 drivers/i2c/busses/i2c-bcm-kona.c pr_err("High speed handshake failed\n"); pr_err 740 drivers/i2c/busses/i2c-bcm-kona.c pr_err("%d hz bus speed not supported\n", bus_speed); pr_err 741 drivers/i2c/busses/i2c-bcm-kona.c pr_err("Valid speeds are 100khz, 400khz, 1mhz, and 3.4mhz\n"); pr_err 114 drivers/i2c/busses/i2c-octeon-core.c pr_err("%s: giving up\n", __func__); pr_err 47 drivers/i2c/busses/i2c-opal.c pr_err("Failed to get the async token\n"); pr_err 190 drivers/i2c/busses/i2c-parport.c pr_err("Unable to register with parport\n"); pr_err 454 drivers/i2c/busses/scx200_acb.c pr_err("failed to register\n"); pr_err 481 drivers/i2c/busses/scx200_acb.c pr_err("can't allocate io 0x%lx-0x%lx\n", base, base + 8 - 1); pr_err 1332 drivers/i2c/i2c-core-base.c pr_err("adapter '%s': no algo supplied!\n", adap->name); pr_err 1352 drivers/i2c/i2c-core-base.c pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n", pr_err 1362 drivers/i2c/i2c-core-base.c pr_err("adapter '%s': can't register device (%d)\n", adap->name, res); pr_err 360 drivers/i2c/i2c-stub.c pr_err("Please specify a chip address\n"); pr_err 366 drivers/i2c/i2c-stub.c pr_err("Invalid chip address 0x%02x\n", pr_err 92 drivers/ide/ide-taskfile.c pr_err("%s: multimode not set!\n", drive->name); pr_err 221 drivers/ide/ide-taskfile.c pr_err("%s: drive still BUSY!\n", drive->name); pr_err 404 drivers/ide/ide-taskfile.c pr_err("%s: no DRQ after issuing %sWRITE%s\n", drive->name, pr_err 577 drivers/ide/ide-taskfile.c pr_err("%s: %s Multimode Write multcount is not set\n", pr_err 596 drivers/ide/ide-taskfile.c pr_err("%s: %s Multimode Read multcount is not set\n", pr_err 625 drivers/ide/ide-taskfile.c pr_err("%s: in/out command without data\n", pr_err 165 drivers/ide/tx4939ide.c pr_err("%s: Error interrupt %#x (%s%s%s )\n", pr_err 401 drivers/iio/adc/max1027.c pr_err("Can't allocate iio device\n"); pr_err 213 drivers/iio/adc/mt6577_auxadc.c pr_err("failed to enable auxadc clock\n"); pr_err 233 drivers/iio/adc/qcom-spmi-adc5.c pr_err("Invalid data:0x%x\n", *data); pr_err 328 drivers/iio/adc/qcom-spmi-adc5.c pr_err("ADC configure failed with %d\n", ret); pr_err 335 drivers/iio/adc/qcom-spmi-adc5.c pr_err("EOC bit not set\n"); pr_err 345 drivers/iio/adc/qcom-spmi-adc5.c pr_err("EOC bit not set\n"); pr_err 535 drivers/iio/adc/qcom-spmi-adc5.c pr_err("Invalid channel name\n"); pr_err 760 drivers/iio/adc/qcom-spmi-adc5.c pr_err("adc get dt data failed\n"); pr_err 394 drivers/iio/adc/qcom-vadc-common.c pr_err("Invalid scale type %d\n", scaletype); pr_err 118 drivers/iio/dac/ds4424.c pr_err("%s : ds4424_get_value returned %d\n", pr_err 270 drivers/iio/industrialio-core.c pr_err("could not register bus type\n"); pr_err 276 drivers/iio/industrialio-core.c pr_err("failed to allocate char dev region\n"); pr_err 1452 drivers/iio/industrialio-core.c pr_err("failed to get device id\n"); pr_err 103 drivers/iio/industrialio-sw-device.c pr_err("Invalid device type: %s\n", type); pr_err 103 drivers/iio/industrialio-sw-trigger.c pr_err("Invalid trigger type: %s\n", type); pr_err 88 drivers/iio/industrialio-trigger.c pr_err("Duplicate trigger name '%s'\n", trig_info->name); pr_err 255 drivers/iio/industrialio-trigger.c pr_err("Could not find an available irq for trigger %s, CONFIG_IIO_CONSUMERS_PER_TRIGGER=%d limit might be exceeded\n", pr_err 205 drivers/iio/inkern.c pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", pr_err 711 drivers/iio/light/isl29018.c pr_err("failed to disable isl29018's VCC regulator!\n"); pr_err 856 drivers/iio/light/rpr0521.c pr_err("regmap_update_bits returned %d\n", ret); pr_err 1983 drivers/infiniband/core/cma.c pr_err("RDMA CMA: unexpected IB CM event: %d\n", pr_err 3717 drivers/infiniband/core/cma.c pr_err("RDMA CMA: unexpected IB CM event: %d\n", pr_err 1190 drivers/infiniband/core/iwcm.c pr_err("iw_cm: couldn't init iwpm\n"); pr_err 1200 drivers/infiniband/core/iwcm.c pr_err("iw_cm: couldn't register sysctl paths\n"); pr_err 110 drivers/infiniband/core/iwpm_util.c pr_err("%s Incorrect usage - negative refcount\n", __func__); pr_err 477 drivers/infiniband/core/iwpm_util.c pr_err("%s: Invalid sockaddr family\n", __func__); pr_err 585 drivers/infiniband/core/iwpm_util.c pr_err("%s: Invalid sockaddr family\n", __func__); pr_err 1426 drivers/infiniband/core/mad.c pr_err("Method %d already in use\n", i); pr_err 1863 drivers/infiniband/core/mad.c pr_err("MAD received with unsupported base version %d %s\n", pr_err 3398 drivers/infiniband/core/mad.c pr_err("Couldn't register ib_mad client\n"); pr_err 75 drivers/infiniband/core/restrack.c pr_err("restrack: %s", CUT_HERE); pr_err 91 drivers/infiniband/core/restrack.c pr_err("restrack: %s %s object allocated by %s is not freed\n", pr_err 101 drivers/infiniband/core/restrack.c pr_err("restrack: %s", CUT_HERE); pr_err 384 drivers/infiniband/core/rw.c pr_err("SG count too large: sg_cnt=%d, prot_sg_cnt=%d, pages_per_mr=%d\n", pr_err 424 drivers/infiniband/core/rw.c pr_err("failed to map PI sg (%d)\n", sg_cnt + prot_sg_cnt); pr_err 709 drivers/infiniband/core/rw.c pr_err("%s: failed to allocated %d MRs\n", pr_err 719 drivers/infiniband/core/rw.c pr_err("%s: failed to allocated %d SIG MRs\n", pr_err 2240 drivers/infiniband/core/sa_query.c pr_err("Couldn't find index for default PKey\n"); pr_err 2435 drivers/infiniband/core/sa_query.c pr_err("Couldn't register ib_sa client\n"); pr_err 2441 drivers/infiniband/core/sa_query.c pr_err("Couldn't initialize multicast handling\n"); pr_err 337 drivers/infiniband/core/ucma.c pr_err("ucma_removal_event_handler: warning: connect request event wasn't found\n"); pr_err 1869 drivers/infiniband/core/ucma.c pr_err("rdma_ucm: couldn't create abi_version attr\n"); pr_err 1875 drivers/infiniband/core/ucma.c pr_err("rdma_ucm: couldn't register sysctl paths\n"); pr_err 377 drivers/infiniband/core/umem.c pr_err("ib_umem_copy_from not in range. offset: %zd umem length: %zd end: %zd\n", pr_err 537 drivers/infiniband/core/umem_odp.c pr_err("error: got different pages in IB device and from get_user_pages. IB device page: %p, gup page: %p\n", pr_err 1424 drivers/infiniband/core/user_mad.c pr_err("couldn't register device number\n"); pr_err 1432 drivers/infiniband/core/user_mad.c pr_err("couldn't register dynamic device number\n"); pr_err 1439 drivers/infiniband/core/user_mad.c pr_err("couldn't create class infiniband_mad\n"); pr_err 1434 drivers/infiniband/core/uverbs_main.c pr_err("user_verbs: couldn't register device number\n"); pr_err 1442 drivers/infiniband/core/uverbs_main.c pr_err("couldn't register dynamic device number\n"); pr_err 1449 drivers/infiniband/core/uverbs_main.c pr_err("user_verbs: couldn't create class infiniband_verbs\n"); pr_err 1457 drivers/infiniband/core/uverbs_main.c pr_err("user_verbs: couldn't create abi_version attribute\n"); pr_err 1463 drivers/infiniband/core/uverbs_main.c pr_err("user_verbs: couldn't register client\n"); pr_err 1353 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to register with netedev: %#x\n", rc); pr_err 1369 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to get MSI-X vectors: %#x\n", rc); pr_err 1384 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to allocate RCFW Channel: %#x\n", rc); pr_err 1395 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to allocate CREQ: %#x\n", rc); pr_err 1404 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to enable RCFW channel: %#x\n", rc); pr_err 1418 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to allocate QPLIB context: %#x\n", rc); pr_err 1425 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to allocate stats context: %#x\n", rc); pr_err 1432 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to initialize RCFW: %#x\n", rc); pr_err 1440 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to allocate resources: %#x\n", rc); pr_err 1446 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to initialize resources: %#x\n", rc); pr_err 1468 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to register with IB: %#x\n", rc); pr_err 1521 drivers/infiniband/hw/bnxt_re/main.c pr_err("%s: Failed to probe\n", ROCE_DRV_MODULE_NAME); pr_err 1636 drivers/infiniband/hw/bnxt_re/main.c pr_err("Failed to register with the device %s: %#x\n", pr_err 1695 drivers/infiniband/hw/bnxt_re/main.c pr_err("%s: Cannot register to netdevice_notifier", pr_err 113 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s: stalled rnic\n", rdev_p->dev_name); pr_err 925 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s t3cdev_p(%p)->ctl returned error %d\n", pr_err 930 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("fatal firmware version mismatch: need version %u but adapter has version %u\n", pr_err 940 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s t3cdev_p(%p)->ctl returned error %d\n", pr_err 947 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s t3cdev_p(%p)->ctl returned error %d\n", pr_err 976 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s error %d initializing ctrl_qp\n", __func__, err); pr_err 983 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s error %d initializing hal resources\n", pr_err 989 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s error %d initializing pbl mem pool\n", pr_err 995 drivers/infiniband/hw/cxgb3/cxio_hal.c pr_err("%s error %d initializing rqt mem pool\n", pr_err 143 drivers/infiniband/hw/cxgb3/iwch.c pr_err("Cannot allocate ib device\n"); pr_err 153 drivers/infiniband/hw/cxgb3/iwch.c pr_err("Unable to open CXIO rdev\n"); pr_err 164 drivers/infiniband/hw/cxgb3/iwch.c pr_err("Unable to register device\n"); pr_err 369 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("ARP failure during connect\n"); pr_err 394 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to alloc skb\n", __func__); pr_err 413 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to alloc skb\n", __func__); pr_err 438 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to alloc skb\n", __func__); pr_err 543 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc skb!\n", __func__); pr_err 592 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc skb!\n", __func__); pr_err 797 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("update_rx_credits - cannot alloc skb!\n"); pr_err 1064 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s Unexpected streaming data. ep %p state %d tid %d\n", pr_err 1157 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s ep %p state %d\n", __func__, ep, ep->com.state); pr_err 1202 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("t3c_listen_start failed to alloc skb!\n"); pr_err 1244 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to alloc skb\n", __func__); pr_err 1347 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - listening ep not in LISTEN\n", __func__); pr_err 1357 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s bad dst mac %pM\n", __func__, req->dst_mac); pr_err 1368 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to find dst entry!\n", __func__); pr_err 1374 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to allocate l2t entry!\n", __func__); pr_err 1380 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - failed to allocate ep entry!\n", __func__); pr_err 1587 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - qp <- error failed!\n", __func__); pr_err 1610 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot allocate skb!\n", __func__); pr_err 1708 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s BAD CLOSE - Aborting tid %u\n", pr_err 1896 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc ep\n", __func__); pr_err 1925 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc atid\n", __func__); pr_err 1935 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot find route\n", __func__); pr_err 1943 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc l2e\n", __func__); pr_err 1988 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc ep\n", __func__); pr_err 2005 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("%s - cannot alloc atid\n", __func__); pr_err 2214 drivers/infiniband/hw/cxgb3/iwch_cm.c pr_err("Unexpected SET_TCB_RPL status %u for tid %u\n", pr_err 103 drivers/infiniband/hw/cxgb3/iwch_cq.c pr_err("Unexpected opcode %d in the CQE received for QPID=0x%0x\n", pr_err 157 drivers/infiniband/hw/cxgb3/iwch_cq.c pr_err("Unexpected cqe_status 0x%x for QPID=0x%0x\n", pr_err 55 drivers/infiniband/hw/cxgb3/iwch_ev.c pr_err("%s unaffiliated error 0x%x qpid 0x%x\n", pr_err 72 drivers/infiniband/hw/cxgb3/iwch_ev.c pr_err("%s - AE qpid 0x%x opcode %d status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x\n", pr_err 121 drivers/infiniband/hw/cxgb3/iwch_ev.c pr_err("BAD AE cqid 0x%x qpid 0x%x opcode %d status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x\n", pr_err 221 drivers/infiniband/hw/cxgb3/iwch_ev.c pr_err("Unknown T3 status 0x%x QPID 0x%x\n", pr_err 231 drivers/infiniband/hw/cxgb3/iwch_provider.c pr_err("Error %d rearming CQID 0x%x\n", err, chp->cq.cqid); pr_err 670 drivers/infiniband/hw/cxgb3/iwch_qp.c pr_err("%s cannot send zb_read!!\n", __func__); pr_err 701 drivers/infiniband/hw/cxgb3/iwch_qp.c pr_err("%s cannot send TERMINATE!\n", __func__); pr_err 1038 drivers/infiniband/hw/cxgb3/iwch_qp.c pr_err("%s in a bad state %d\n", __func__, qhp->attr.state); pr_err 181 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s timer already started! ep %p\n", pr_err 209 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - device in error state - dropping\n", __func__); pr_err 226 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - device in error state - dropping\n", __func__); pr_err 477 drivers/infiniband/hw/cxgb4/cm.c pr_err("ARP failure\n"); pr_err 483 drivers/infiniband/hw/cxgb4/cm.c pr_err("ARP failure during MPA Negotiation - Closing Connection\n"); pr_err 538 drivers/infiniband/hw/cxgb4/cm.c pr_err("ARP failure during accept - tid %u - dropping connection\n", pr_err 552 drivers/infiniband/hw/cxgb4/cm.c pr_err("ARP failure during connect\n"); pr_err 757 drivers/infiniband/hw/cxgb4/cm.c pr_err("T%d Chip is not supported\n", pr_err 770 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to alloc skb\n", __func__); pr_err 843 drivers/infiniband/hw/cxgb4/cm.c pr_err("T%d Chip is not supported\n", pr_err 893 drivers/infiniband/hw/cxgb4/cm.c pr_err("T%d Chip is not supported\n", pr_err 1063 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc skb!\n", __func__); pr_err 1143 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc skb!\n", __func__); pr_err 1423 drivers/infiniband/hw/cxgb4/cm.c pr_err("update_rx_credits - cannot alloc skb!\n"); pr_err 1498 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s MPA version mismatch. Local = %d, Received = %d\n", pr_err 1653 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s: RTR mismatch, sending TERM\n", __func__); pr_err 1672 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s: Insufficient IRD, sending TERM\n", __func__); pr_err 1743 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s MPA version mismatch. Local = %d, Received = %d\n", pr_err 1877 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s Unexpected streaming data." \ pr_err 1945 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s ep %p state %d\n", __func__, ep, ep->com.state); pr_err 2189 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc atid\n", __func__); pr_err 2219 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot find route\n", __func__); pr_err 2227 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc l2e\n", __func__); pr_err 2532 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s connect request on invalid stid %d\n", pr_err 2538 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - listening ep not in LISTEN\n", __func__); pr_err 2571 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to find dst entry!\n", __func__); pr_err 2577 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to allocate ep entry!\n", __func__); pr_err 2585 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to allocate l2t entry!\n", __func__); pr_err 2912 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - qp <- error failed!\n", __func__); pr_err 3316 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc ep\n", __func__); pr_err 3357 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc atid\n", __func__); pr_err 3423 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot find route\n", __func__); pr_err 3431 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc l2e\n", __func__); pr_err 3489 drivers/infiniband/hw/cxgb4/cm.c pr_err("cxgb4_create_server6/filter failed err %d stid %d laddr %pI6 lport %d\n", pr_err 3530 drivers/infiniband/hw/cxgb4/cm.c pr_err("cxgb4_create_server/filter failed err %d stid %d laddr %pI4 lport %d\n" pr_err 3546 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc ep\n", __func__); pr_err 3571 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cannot alloc stid\n", __func__); pr_err 3731 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - qp <- error failed!\n", pr_err 3775 drivers/infiniband/hw/cxgb4/cm.c pr_err("active ofld_connect_wr failure %d atid %d\n", pr_err 3804 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s passive open failure %d\n", __func__, req->retval); pr_err 3914 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s unexpected ofld conn wr state %d\n", pr_err 4041 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - cxgb4_ofld_send error %d - dropping\n", __func__, pr_err 4110 drivers/infiniband/hw/cxgb4/cm.c pr_err("T%d Chip is not supported\n", pr_err 4140 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to find dst entry!\n", __func__); pr_err 4146 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to allocate neigh!\n", __func__); pr_err 4164 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s - failed to allocate l2t entry!\n", pr_err 4306 drivers/infiniband/hw/cxgb4/cm.c pr_err("No handler for opcode 0x%x.\n", opcode); pr_err 4363 drivers/infiniband/hw/cxgb4/cm.c pr_err("Unexpected SET_TCB_RPL status %u for tid %u\n", pr_err 4392 drivers/infiniband/hw/cxgb4/cm.c pr_err("%s unexpected fw6 msg type %u\n", pr_err 811 drivers/infiniband/hw/cxgb4/cq.c pr_err("Unexpected opcode %d in the CQE received for QPID=0x%0x\n", pr_err 848 drivers/infiniband/hw/cxgb4/cq.c pr_err("Unexpected opcode %d in the CQE received for QPID=0x%0x\n", pr_err 903 drivers/infiniband/hw/cxgb4/cq.c pr_err("Unexpected cqe_status 0x%x for QPID=0x%0x\n", pr_err 797 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: unsupported udb/ucq densities %u/%u\n", pr_err 804 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: unsupported qp and cq id ranges qp start %u size %u cq start %u size %u\n", pr_err 813 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: unsupported sge host page size %u\n", pr_err 853 drivers/infiniband/hw/cxgb4/device.c pr_err("error %d initializing resources\n", err); pr_err 858 drivers/infiniband/hw/cxgb4/device.c pr_err("error %d initializing pbl pool\n", err); pr_err 863 drivers/infiniband/hw/cxgb4/device.c pr_err("error %d initializing rqt pool\n", err); pr_err 868 drivers/infiniband/hw/cxgb4/device.c pr_err("error %d initializing ocqp pool\n", err); pr_err 983 drivers/infiniband/hw/cxgb4/device.c pr_err("Cannot allocate ib device\n"); pr_err 1019 drivers/infiniband/hw/cxgb4/device.c pr_err("Unable to ioremap BAR2\n"); pr_err 1031 drivers/infiniband/hw/cxgb4/device.c pr_err("Unable to ioremap onchip mem\n"); pr_err 1043 drivers/infiniband/hw/cxgb4/device.c pr_err("Unable to open CXIO rdev err %d\n", ret); pr_err 1229 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: initialization failed: %ld\n", pr_err 1382 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: Fatal error - DB overflow recovery failed - error syncing SQ qid %u\n", pr_err 1396 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: Fatal error - DB overflow recovery failed - error syncing RQ qid %u\n", pr_err 1429 drivers/infiniband/hw/cxgb4/device.c pr_err("%s: Fatal error - DB overflow recovery failed\n", pr_err 1544 drivers/infiniband/hw/cxgb4/device.c pr_err("Failed creating workqueue to register iwarp device\n"); pr_err 129 drivers/infiniband/hw/cxgb4/ev.c pr_err("BAD AE qpid 0x%x opcode %d status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x\n", pr_err 144 drivers/infiniband/hw/cxgb4/ev.c pr_err("BAD AE cqid 0x%x qpid 0x%x opcode %d status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x\n", pr_err 168 drivers/infiniband/hw/cxgb4/ev.c pr_err("AE with status 0!\n"); pr_err 210 drivers/infiniband/hw/cxgb4/ev.c pr_err("Unknown T4 status 0x%x QPID 0x%x\n", pr_err 273 drivers/infiniband/hw/cxgb4/iw_cxgb4.h pr_err("%s - Device %s not responding (disabling device) - tid %u qpid %u\n", pr_err 591 drivers/infiniband/hw/cxgb4/provider.c pr_err("%s - Failed registering iwarp device: %d\n", pr_err 2023 drivers/infiniband/hw/cxgb4/qp.c pr_err("%s in a bad state %d\n", __func__, qhp->attr.state); pr_err 808 drivers/infiniband/hw/cxgb4/t4.h pr_err("cq overflow cqid %u\n", cq->cqid); pr_err 216 drivers/infiniband/hw/hfi1/affinity.c pr_err("HFI: Invalid PCI NUMA node. Performance may be affected\n"); pr_err 217 drivers/infiniband/hw/hfi1/affinity.c pr_err("HFI: System BIOS may need to be upgraded\n"); pr_err 868 drivers/infiniband/hw/hfi1/affinity.c pr_err("Failed to register sdma irq affinity notifier for irq %d\n", pr_err 877 drivers/infiniband/hw/hfi1/affinity.c pr_err("Failed to cleanup sdma irq affinity notifier for irq %d\n", pr_err 77 drivers/infiniband/hw/hfi1/device.c pr_err("Could not add cdev for minor %d, %s (err %d)\n", pr_err 90 drivers/infiniband/hw/hfi1/device.c pr_err("Could not create device for minor %d, %s (err %d)\n", pr_err 144 drivers/infiniband/hw/hfi1/device.c pr_err("Could not allocate chrdev region (err %d)\n", -ret); pr_err 151 drivers/infiniband/hw/hfi1/device.c pr_err("Could not create device class (err %d)\n", -ret); pr_err 160 drivers/infiniband/hw/hfi1/device.c pr_err("Could not create device class for user accessible files (err %d)\n", pr_err 832 drivers/infiniband/hw/hfi1/init.c pr_err("alloc_workqueue failed for port %d\n", pidx + 1); pr_err 1443 drivers/infiniband/hw/hfi1/init.c pr_err("Invalid max_mtu 0x%x, using 0x%x instead\n", pr_err 1463 drivers/infiniband/hw/hfi1/init.c pr_err("Invalid mode: both receive interrupt count and available timeout are zero - setting interrupt count to 1\n"); pr_err 1471 drivers/infiniband/hw/hfi1/init.c pr_err("Invalid mode: receive interrupt count greater than 1 and available timeout is zero - setting available timeout to 1\n"); pr_err 1479 drivers/infiniband/hw/hfi1/init.c pr_err("Invalid mode: dynamic receive interrupt mitigation with invalid count and timeout - turning dynamic off\n"); pr_err 1488 drivers/infiniband/hw/hfi1/init.c pr_err("Failed to allocate opfn_wq"); pr_err 1499 drivers/infiniband/hw/hfi1/init.c pr_err("Unable to register driver: error %d\n", -ret); pr_err 130 drivers/infiniband/hw/i40iw/i40iw.h #define i40iw_pr_err(fmt, args ...) pr_err("%s: "fmt, __func__, ## args) pr_err 2296 drivers/infiniband/hw/i40iw/i40iw_cm.c pr_err("node destroyed before established\n"); pr_err 2502 drivers/infiniband/hw/i40iw/i40iw_cm.c pr_err("%s wrong cm_node state =%d\n", __func__, cm_node->state); pr_err 114 drivers/infiniband/hw/mlx4/alias_GUID.c pr_err("%s: ERROR: asked for index:%d\n", __func__, index); pr_err 318 drivers/infiniband/hw/mlx4/alias_GUID.c pr_err("block num mismatch: %d != %d\n", pr_err 903 drivers/infiniband/hw/mlx4/alias_GUID.c pr_err("init_alias_guid_service: Failed. (ret:%d)\n", ret); pr_err 82 drivers/infiniband/hw/mlx4/cm.c pr_err("trying to set local_comm_id in SIDR_REP\n"); pr_err 97 drivers/infiniband/hw/mlx4/cm.c pr_err("trying to set local_comm_id in SIDR_REP\n"); pr_err 112 drivers/infiniband/hw/mlx4/cm.c pr_err("trying to set remote_comm_id in SIDR_REQ\n"); pr_err 127 drivers/infiniband/hw/mlx4/cm.c pr_err("trying to set remote_comm_id in SIDR_REQ\n"); pr_err 1751 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed reposting tunnel " pr_err 1792 drivers/infiniband/hw/mlx4/mad.c pr_err("Fatal error (%d) on a MAD QP on port %d\n", pr_err 1838 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't create %s QP (%d)\n", pr_err 1857 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't change %s qp state to INIT (%d)\n", pr_err 1864 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't change %s qp state to RTR (%d)\n", pr_err 1872 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't change %s qp state to RTS (%d)\n", pr_err 1880 drivers/infiniband/hw/mlx4/mad.c pr_err(" mlx4_ib_post_pv_buf error" pr_err 1930 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed reposting SQP " pr_err 1996 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed allocating qp0 tunnel bufs (%d)\n", ret); pr_err 2003 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed allocating qp1 tunnel bufs (%d)\n", ret); pr_err 2016 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't create tunnel CQ (%d)\n", ret); pr_err 2023 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't create tunnel PD (%d)\n", ret); pr_err 2030 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't create %s QP0 (%d)\n", pr_err 2038 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't create %s QP1 (%d)\n", pr_err 2052 drivers/infiniband/hw/mlx4/mad.c pr_err("Couldn't arm tunnel cq (%d)\n", ret); pr_err 2188 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed initializing mcg para-virt (%d)\n", ret); pr_err 2195 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed to create tunnelling WQ for port %d\n", port); pr_err 2203 drivers/infiniband/hw/mlx4/mad.c pr_err("Failed to create up/down WQ for port %d\n", port); pr_err 950 drivers/infiniband/hw/mlx4/main.c pr_err("Unable to get default sl to vl mapping for port %d. Using all zeroes (%d)\n", pr_err 1546 drivers/infiniband/hw/mlx4/main.c pr_err("Invalid priority value %d\n", flow_attr->priority); pr_err 1551 drivers/infiniband/hw/mlx4/main.c pr_err("Invalid domain value %d\n", domain); pr_err 1608 drivers/infiniband/hw/mlx4/main.c pr_err("mcg table is full. Fail to register network rule.\n"); pr_err 1610 drivers/infiniband/hw/mlx4/main.c pr_err("Device managed flow steering is disabled. Fail to register network rule.\n"); pr_err 1612 drivers/infiniband/hw/mlx4/main.c pr_err("Invalid argument. Fail to register network rule.\n"); pr_err 1625 drivers/infiniband/hw/mlx4/main.c pr_err("Fail to detach network rule. registration id = 0x%llx\n", pr_err 1878 drivers/infiniband/hw/mlx4/main.c pr_err("multicast attach op failed, err %d\n", err); pr_err 1958 drivers/infiniband/hw/mlx4/main.c pr_err("Couldn't find reg_id for mgid. Steering rule is left attached\n"); pr_err 3207 drivers/infiniband/hw/mlx4/main.c pr_err("Unable to get current sl to vl mapping for port %d. Using all zeroes (%d)\n", pr_err 49 drivers/infiniband/hw/mlx4/mcg.c #define mcg_error(fmt, arg...) pr_err(fmt, ##arg) pr_err 59 drivers/infiniband/hw/mlx4/mcg.c pr_err(" %16s: " format, (group)->name, ## arg) pr_err 1666 drivers/infiniband/hw/mlx4/qp.c pr_err("Failed to create GSI QP for RoCEv2 (%ld)\n", PTR_ERR(sqp->roce_v2_gsi)); pr_err 1823 drivers/infiniband/hw/mlx4/qp.c pr_err("sgid_index (%u) too large. max is %d\n", pr_err 2224 drivers/infiniband/hw/mlx4/qp.c pr_err("path MTU (%u) is invalid\n", pr_err 2443 drivers/infiniband/hw/mlx4/qp.c pr_err("Cannot use reserved QKEY" pr_err 2861 drivers/infiniband/hw/mlx4/qp.c pr_err("Failed to modify GSI QP for RoCEv2 (%d)\n", pr_err 3236 drivers/infiniband/hw/mlx4/qp.c pr_err("built UD header of size %d:\n", header_size); pr_err 3239 drivers/infiniband/hw/mlx4/qp.c pr_err(" [%02x] ", i * 4); pr_err 3245 drivers/infiniband/hw/mlx4/qp.c pr_err("\n"); pr_err 3567 drivers/infiniband/hw/mlx4/qp.c pr_err("Failed to get gid at index %d. RoCEv2 will not work properly\n", pr_err 84 drivers/infiniband/hw/mlx4/sysfs.c pr_err("GUID 0 block 0 is RO\n"); pr_err 192 drivers/infiniband/hw/mlx4/sysfs.c pr_err("failed to create %s\n", vdentry->dentry.attr.name); pr_err 208 drivers/infiniband/hw/mlx4/sysfs.c pr_err("failed to create %s\n", attr->name); pr_err 349 drivers/infiniband/hw/mlx4/sysfs.c pr_err("add_port_entries FAILED: for port:%d, error: %d\n", pr_err 481 drivers/infiniband/hw/mlx4/sysfs.c pr_err("mlx4_gen_pkey_eqe failed for slave %d," pr_err 605 drivers/infiniband/hw/mlx4/sysfs.c pr_err("failed to create smi_enabled\n"); pr_err 616 drivers/infiniband/hw/mlx4/sysfs.c pr_err("failed to create enable_smi_admin\n"); pr_err 847 drivers/infiniband/hw/mlx4/sysfs.c pr_err("mlx4_ib_device_register_sysfs error (%d)\n", ret); pr_err 378 drivers/infiniband/hw/mlx5/cq.c pr_err("Got signature completion error with bad syndrome %04x\n", pr_err 130 drivers/infiniband/hw/mlx5/mr.c pr_err("Error inserting to mkey tree. 0x%x\n", -err); pr_err 1300 drivers/infiniband/hw/mlx5/mr.c pr_err("Got MR registration for ODP MR > 512MB, not supported for Connect-IB\n"); pr_err 1993 drivers/infiniband/hw/mlx5/mr.c pr_err("Invalid status check mask\n"); pr_err 2002 drivers/infiniband/hw/mlx5/mr.c pr_err("signature status check requested on a non-signature enabled MR\n"); pr_err 261 drivers/infiniband/hw/mlx5/odp.c pr_err("invalidation called on NULL umem or non-ODP umem\n"); pr_err 2926 drivers/infiniband/hw/mlx5/qp.c pr_err("sgid_index (%u) too large. max is %d\n", pr_err 3228 drivers/infiniband/hw/mlx5/qp.c pr_err("Failed configuring rate limit(err %d): \ pr_err 4662 drivers/infiniband/hw/mlx5/qp.c pr_err("Bad block size given: %u\n", block_size); pr_err 4797 drivers/infiniband/hw/mlx5/qp.c pr_err("Bad signature type (%d) is given.\n", pr_err 68 drivers/infiniband/hw/ocrdma/ocrdma_ah.c pr_err("ocrdma%d: Invalid network header\n", devid); pr_err 103 drivers/infiniband/hw/ocrdma/ocrdma_ah.c pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", pr_err 105 drivers/infiniband/hw/ocrdma/ocrdma_ah.c pr_err("ocrdma%d:Using VLAN 0 for this connection\n", pr_err 699 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("ocrdma%d:Async event - qpid %u is not valid\n", pr_err 709 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("ocrdma%d:Async event - cqid %u is not valid\n", pr_err 776 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() unknown type=0x%x\n", __func__, type); pr_err 860 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(%d) invalid evt code=0x%x\n", __func__, pr_err 876 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() cqe for invalid tag0x%x.expected=0x%x\n", pr_err 1011 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("EQ full on eqid = 0x%x, eqe = 0x%x\n", pr_err 1065 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(%d) mailbox timeout: fw not responding\n", pr_err 1095 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() cqe_status=0x%x, ext_status=0x%x,\n", pr_err 1099 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("opcode=0x%x, subsystem=0x%x\n", pr_err 1135 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("opcode=0x%x, subsystem=0x%x\n", pr_err 1607 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(%d) Unable to initialize PD pool, using default.\n", pr_err 1794 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(%d) max_cqe=0x%x, requester_cqe=0x%x\n", pr_err 2054 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() status=%d\n", __func__, status); pr_err 2077 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() err. status=%d\n", __func__, status); pr_err 2201 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() req. max_send_wr=0x%x\n", __func__, pr_err 2251 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() req. max_recv_wr=0x%x\n", __func__, pr_err 2458 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(%d) rq_err\n", __func__, dev->id); pr_err 2461 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(%d) sq_err\n", __func__, dev->id); pr_err 2556 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", pr_err 2558 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("ocrdma%d:Using VLAN 0 for this connection\n", pr_err 2617 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("ocrdma%d: IB MTU %d is not supported\n", pr_err 2766 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() req. max_wr=0x%x\n", __func__, pr_err 3011 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s(): status=%d\n", __func__, status); pr_err 3230 drivers/infiniband/hw/ocrdma/ocrdma_hw.c pr_err("%s() status=%d\n", __func__, status); pr_err 285 drivers/infiniband/hw/ocrdma/ocrdma_main.c pr_err("%s: stats resource allocation failed\n", __func__); pr_err 293 drivers/infiniband/hw/ocrdma/ocrdma_main.c pr_err("%s(%d) error.\n", __func__, dev->id); pr_err 313 drivers/infiniband/hw/ocrdma/ocrdma_main.c pr_err("Unable to allocate ib device\n"); pr_err 361 drivers/infiniband/hw/ocrdma/ocrdma_main.c pr_err("%s() leaving. ret=%d\n", __func__, status); pr_err 59 drivers/infiniband/hw/ocrdma/ocrdma_stats.c pr_err("%s: No space in stats buff\n", __func__); pr_err 79 drivers/infiniband/hw/ocrdma/ocrdma_stats.c pr_err("%s: stats mbox allocation failed\n", __func__); pr_err 619 drivers/infiniband/hw/ocrdma/ocrdma_stats.c pr_err("%s: stats mbox failed with status = %d\n", pr_err 659 drivers/infiniband/hw/ocrdma/ocrdma_stats.c pr_err("Failed to reset stats = %d\n", status); pr_err 442 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) Freeing in use pdid=0x%x.\n", pr_err 731 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s err, invalid access rights\n", __func__); pr_err 933 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) fw not responding.\n", pr_err 962 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) copy error cqid=0x%x.\n", pr_err 1118 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) unsupported qp type=0x%x requested\n", pr_err 1125 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) unsupported send_wr=0x%x requested\n", pr_err 1127 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) supported send_wr=0x%x\n", pr_err 1132 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) unsupported recv_wr=0x%x requested\n", pr_err 1134 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) supported recv_wr=0x%x\n", pr_err 1139 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) unsupported inline data size=0x%x requested\n", pr_err 1141 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) supported inline data size=0x%x\n", pr_err 1146 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) unsupported send_sge=0x%x requested\n", pr_err 1148 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) supported send_sge=0x%x\n", pr_err 1153 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) unsupported recv_sge=0x%x requested\n", pr_err 1155 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) supported recv_sge=0x%x\n", pr_err 1161 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err pr_err 1168 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) GSI special QPs already created.\n", pr_err 1176 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) Consumer QP cannot use GSI CQs.\n", pr_err 1222 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) user copy error.\n", __func__, dev->id); pr_err 1375 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) error=%d\n", __func__, dev->id, status); pr_err 1424 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s(%d) invalid attribute mask=0x%x specified for\n" pr_err 1943 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s() supported_len=0x%x,\n" pr_err 2447 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c pr_err("%s() invalid opcode received = 0x%x\n", pr_err 310 drivers/infiniband/hw/qedr/main.c pr_err("Status block initialization failed\n"); pr_err 655 drivers/infiniband/hw/qedr/main.c pr_err("unaffiliated event not implemented yet\n"); pr_err 859 drivers/infiniband/hw/qedr/main.c pr_err("Unable to allocate ib device\n"); pr_err 1030 drivers/infiniband/hw/qedr/main.c pr_err("Event not supported\n"); pr_err 2181 drivers/infiniband/hw/qedr/verbs.c pr_err("error: Only MTU sizes of 256, 512, 1024, 2048 and 4096 are supported by RoCE\n"); pr_err 2193 drivers/infiniband/hw/qedr/verbs.c pr_err("Fixing zeroed MTU to qp->mtu = %d\n", qp->mtu); pr_err 2268 drivers/infiniband/hw/qib/qib_file_ops.c pr_err("Could not allocate cdev for minor %d, %s\n", pr_err 2280 drivers/infiniband/hw/qib/qib_file_ops.c pr_err("Could not add cdev for minor %d, %s (err %d)\n", pr_err 2290 drivers/infiniband/hw/qib/qib_file_ops.c pr_err("Could not create device for minor %d, %s (err %d)\n", pr_err 2325 drivers/infiniband/hw/qib/qib_file_ops.c pr_err("Could not allocate chrdev region (err %d)\n", -ret); pr_err 2332 drivers/infiniband/hw/qib/qib_file_ops.c pr_err("Could not create device class (err %d)\n", -ret); pr_err 371 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s) failed: %d\n", unit, ret); pr_err 379 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s/counters) failed: %d\n", pr_err 386 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s/counter_names) failed: %d\n", pr_err 393 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s/%s) failed: %d\n", pr_err 405 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s/%s) failed: %d\n", pr_err 415 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s/%s) failed: %d\n", pr_err 424 drivers/infiniband/hw/qib/qib_fs.c pr_err("create_file(%s/flash) failed: %d\n", pr_err 475 drivers/infiniband/hw/qib/qib_fs.c pr_err("Lookup of %s failed\n", unit); pr_err 524 drivers/infiniband/hw/qib/qib_fs.c pr_err("simple_fill_super failed: %d\n", ret); pr_err 596 drivers/infiniband/hw/qib/qib_init.c pr_err("create_singlethread_workqueue failed for port %d\n", pr_err 1237 drivers/infiniband/hw/qib/qib_init.c pr_err("Unable to register driver: error %d\n", -ret); pr_err 1243 drivers/infiniband/hw/qib/qib_init.c pr_err("Unable to register ipathfs\n"); pr_err 1269 drivers/infiniband/hw/qib/qib_init.c pr_err( pr_err 65 drivers/infiniband/sw/rdmavt/vt.c pr_err("Error in driver CQ init.\n"); pr_err 549 drivers/infiniband/sw/rdmavt/vt.c pr_err("Driver support req not met at %d\n", i); pr_err 562 drivers/infiniband/sw/rdmavt/vt.c pr_err("Error in driver QP init.\n"); pr_err 579 drivers/infiniband/sw/rdmavt/vt.c pr_err("Error in driver MR init.\n"); pr_err 326 drivers/infiniband/sw/rxe/rxe.c pr_err("already configured on %s\n", ndev->name); pr_err 333 drivers/infiniband/sw/rxe/rxe.c pr_err("failed to add %s\n", ndev->name); pr_err 352 drivers/infiniband/sw/rxe/rxe.c pr_err("unable to init object pools\n"); pr_err 111 drivers/infiniband/sw/rxe/rxe_mmap.c pr_err("mmap region is larger than the object!\n"); pr_err 130 drivers/infiniband/sw/rxe/rxe_mmap.c pr_err("err %d from remap_vmalloc_range\n", ret); pr_err 129 drivers/infiniband/sw/rxe/rxe_net.c pr_err("no route to %pI6\n", daddr); pr_err 208 drivers/infiniband/sw/rxe/rxe_net.c pr_err("skb_linearize failed\n"); pr_err 255 drivers/infiniband/sw/rxe/rxe_net.c pr_err("failed to create udp socket. err = %d\n", err); pr_err 355 drivers/infiniband/sw/rxe/rxe_net.c pr_err("Host not reachable\n"); pr_err 379 drivers/infiniband/sw/rxe/rxe_net.c pr_err("Host not reachable\n"); pr_err 439 drivers/infiniband/sw/rxe/rxe_net.c pr_err("Unknown layer 3 protocol: %d\n", skb->protocol); pr_err 645 drivers/infiniband/sw/rxe/rxe_net.c pr_err("Failed to create IPv4 UDP tunnel\n"); pr_err 660 drivers/infiniband/sw/rxe/rxe_net.c pr_err("Failed to create IPv6 UDP tunnel\n"); pr_err 688 drivers/infiniband/sw/rxe/rxe_net.c pr_err("Failed to register netdev notifier\n"); pr_err 148 drivers/infiniband/sw/rxe/rxe_pool.c pr_err("Unable to init kmem cache for %s\n", pr_err 635 drivers/infiniband/sw/rxe/rxe_req.c pr_err("No mr for key %#x\n", pr_err 719 drivers/infiniband/sw/rxe/rxe_req.c pr_err("qp#%d Failed allocating skb\n", qp_num(qp)); pr_err 733 drivers/infiniband/sw/rxe/rxe_resp.c pr_err("Failed copying memory\n"); pr_err 747 drivers/infiniband/sw/rxe/rxe_resp.c pr_err("Failed sending RDMA reply.\n"); pr_err 921 drivers/infiniband/sw/rxe/rxe_resp.c pr_err("Bad rkey %#x invalidation\n", pr_err 1145 drivers/infiniband/sw/rxe/rxe_resp.c pr_err("Failed resending result. This flow is not handled - skb ignored\n"); pr_err 66 drivers/infiniband/sw/rxe/rxe_sysfs.c pr_err("add: invalid interface name\n"); pr_err 72 drivers/infiniband/sw/rxe/rxe_sysfs.c pr_err("interface %s not found\n", intf); pr_err 79 drivers/infiniband/sw/rxe/rxe_sysfs.c pr_err("already configured on %s\n", intf); pr_err 86 drivers/infiniband/sw/rxe/rxe_sysfs.c pr_err("failed to add %s\n", intf); pr_err 103 drivers/infiniband/sw/rxe/rxe_sysfs.c pr_err("add: invalid interface name\n"); pr_err 115 drivers/infiniband/sw/rxe/rxe_sysfs.c pr_err("not configured on %s\n", intf); pr_err 1217 drivers/infiniband/sw/rxe/rxe_verbs.c pr_err("failed to allocate crc algorithm err:%ld\n", pr_err 97 drivers/infiniband/ulp/iser/iscsi_iser.h pr_err(PFX "%s: " fmt, __func__ , ## arg) pr_err 1084 drivers/infiniband/ulp/iser/iser_verbs.c pr_err("ib_check_mr_status failed, ret %d\n", ret); pr_err 1096 drivers/infiniband/ulp/iser/iser_verbs.c pr_err("PI error found type %d at sector %llx " pr_err 36 drivers/infiniband/ulp/isert/ib_isert.h pr_err(PFX "%s: " fmt, __func__ , ## arg) pr_err 1049 drivers/infiniband/ulp/opa_vnic/opa_vnic_vema.c pr_err("VNIC driver register failed %d\n", rc); pr_err 359 drivers/infiniband/ulp/srp/ib_srp.c pr_err("No route available from %pIS to %pIS (%d)\n", pr_err 369 drivers/infiniband/ulp/srp/ib_srp.c pr_err("Resolving address %pIS failed (%d)\n", pr_err 606 drivers/infiniband/ulp/srp/ib_srp.c pr_err("QP creation failed for dev %s: %d\n", pr_err 1785 drivers/infiniband/ulp/srp/ib_srp.c pr_err("Inconsistent: scsi len %d <> desc len %lld <> mr len %lld; ndesc %d; nmdesc = %d\n", pr_err 4300 drivers/infiniband/ulp/srp/ib_srp.c pr_err("couldn't register class infiniband_srp\n"); pr_err 4308 drivers/infiniband/ulp/srp/ib_srp.c pr_err("couldn't register IB client\n"); pr_err 181 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("received unrecognized IB event %d\n", event->event); pr_err 236 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("received unrecognized IB QP event %d\n", event->event); pr_err 639 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("disabling MAD processing failed.\n"); pr_err 1051 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("received unsupported SRP_CMD request type (%u out + %u in != %u / %zu)\n", pr_err 1069 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Immediate data (length %d + %d) exceeds request size %d\n", pr_err 1074 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Received too few data - %d < %d\n", pr_err 1083 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Received invalid write request\n"); pr_err 1128 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Translating pkey %#x failed (%d) - using index 0\n", pr_err 1344 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s[%d]: wrong state = %d\n", __func__, pr_err 1524 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("0x%llx: parsing SRP descriptor table failed.\n", pr_err 1653 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Not yet implemented: SRP_I_LOGOUT\n"); pr_err 1662 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Received SRP_RSP\n"); pr_err 1665 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("received IU with unknown opcode 0x%x\n", opcode); pr_err 1695 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("req_lim = %d < 0\n", req_lim); pr_err 1766 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("IB completion has been received too late for wr_id = %u.\n", pr_err 1798 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("failed to create CQ cqe= %d ret= %d\n", pr_err 1855 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("failed to create queue pair with sq_size = %d (%d)\n", pr_err 1910 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s-%d: changing queue pair into error state failed: %d\n", pr_err 1915 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s-%d: queuing zero-length write failed: %d\n", pr_err 2201 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because its length (%d bytes) is out of range (%d .. %d)\n", pr_err 2218 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because it has an invalid target port identifier.\n"); pr_err 2226 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because out of memory.\n"); pr_err 2265 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because creating a new QP SQ ring failed.\n"); pr_err 2302 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because creating a new QP RQ ring failed.\n"); pr_err 2314 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.\n"); pr_err 2384 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rejected SRP_LOGIN_REQ because enabling RTR failed (error code = %d)\n", pr_err 2446 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("sending SRP_LOGIN_REQ response failed (error code = %d)\n", pr_err 2592 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s-%d: QP transition to RTS failed\n", ch->sess_name, pr_err 2604 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s-%d: channel transition to LIVE state failed\n", pr_err 2671 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("received unrecognized CM event %d\n", event->event); pr_err 2713 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("received unrecognized RDMA CM event %d\n", pr_err 2761 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s: ib_post_send() returned %d for %d (avail: %d)\n", pr_err 2872 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("%s: sending cmd response failed for tag %llu (%d)\n", pr_err 3162 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("ib_cm_listen() failed: %d (cm_id state = %d)\n", ret, pr_err 3185 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("MAD registration failed for %s-%d.\n", pr_err 3437 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("invalid initiator port ID %s\n", name); pr_err 3460 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("kstrtoul() failed with ret: %d\n", ret); pr_err 3464 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("val: %lu exceeds MAX_SRPT_RDMA_SIZE: %d\n", val, pr_err 3469 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("val: %lu smaller than DEFAULT_MAX_RDMA_SIZE: %d\n", pr_err 3497 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("kstrtoul() failed with ret: %d\n", ret); pr_err 3501 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("val: %lu exceeds MAX_SRPT_RSP_SIZE: %d\n", val, pr_err 3506 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("val: %lu smaller than MIN_MAX_RSP_SIZE: %d\n", val, pr_err 3534 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("kstrtoul() failed with ret: %d\n", ret); pr_err 3538 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("val: %lu exceeds MAX_SRPT_SRQ_SIZE: %d\n", val, pr_err 3543 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("val: %lu smaller than MIN_SRPT_SRQ_SIZE: %d\n", val, pr_err 3618 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("RDMA/CM ID creation failed: %ld\n", pr_err 3628 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Binding RDMA/CM ID to address %s failed: %d\n", pr_err 3637 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("rdma_listen() failed: %d\n", ret); pr_err 3717 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Unable to extract srpt_tpg_store_enable\n"); pr_err 3722 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("Illegal value for srpt_tpg_store_enable: %lu\n", tmp); pr_err 3860 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("invalid value %d for kernel module parameter srp_max_req_size -- must be at least %d.\n", pr_err 3867 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("invalid value %d for kernel module parameter srpt_srq_size -- must be in the range [%d..%d].\n", pr_err 3878 drivers/infiniband/ulp/srpt/ib_srpt.c pr_err("couldn't register IB client\n"); pr_err 65 drivers/input/apm-power.c pr_err("Failed to register input power handler, error %d\n", pr_err 73 drivers/input/apm-power.c pr_err("Failed to open input power device, error %d\n", error); pr_err 1347 drivers/input/evdev.c pr_err("failed to reserve new minor: %d\n", error); pr_err 207 drivers/input/ff-memless.c pr_err("invalid type in get_compatible_type()\n"); pr_err 315 drivers/input/ff-memless.c pr_err("invalid type in ml_combine_effects()\n"); pr_err 378 drivers/input/gameport/gameport.c pr_err("Not enough memory to queue event %d\n", event_type); pr_err 715 drivers/input/gameport/gameport.c pr_err("driver_attach() failed for %s, error: %d\n", pr_err 736 drivers/input/gameport/gameport.c pr_err("driver_register() failed for %s, error: %d\n", pr_err 836 drivers/input/gameport/gameport.c pr_err("failed to register gameport bus, error: %d\n", error); pr_err 1033 drivers/input/input.c pr_err("failed to attach handler %s to device %s, error: %d\n", pr_err 2023 drivers/input/input.c pr_err("%s: unknown type %u (code %u)\n", __func__, type, code); pr_err 2500 drivers/input/input.c pr_err("unable to register input_dev class\n"); pr_err 2511 drivers/input/input.c pr_err("unable to register char major %d", INPUT_MAJOR); pr_err 909 drivers/input/joydev.c pr_err("failed to reserve new minor: %d\n", error); pr_err 808 drivers/input/joystick/gamecon.c pr_err("Pad type %d unknown\n", pad_type); pr_err 814 drivers/input/joystick/gamecon.c pr_err("Not enough memory for input device\n"); pr_err 951 drivers/input/joystick/gamecon.c pr_err("parport busy already - lp.o loaded?\n"); pr_err 957 drivers/input/joystick/gamecon.c pr_err("Not enough memory\n"); pr_err 977 drivers/input/joystick/gamecon.c pr_err("No valid devices specified\n"); pr_err 1034 drivers/input/joystick/gamecon.c pr_err("at least one device must be specified\n"); pr_err 174 drivers/input/joystick/turbografx.c pr_err("parport busy already - lp.o loaded?\n"); pr_err 210 drivers/input/joystick/walkera0701.c pr_err("parport %d does not have interrupt assigned\n", pr_err 226 drivers/input/joystick/walkera0701.c pr_err("failed to register parport device\n"); pr_err 231 drivers/input/joystick/walkera0701.c pr_err("failed to negotiate parport mode\n"); pr_err 240 drivers/input/joystick/walkera0701.c pr_err("failed to allocate input device\n"); pr_err 268 drivers/input/joystick/walkera0701.c pr_err("failed to register input device\n"); pr_err 68 drivers/input/misc/atlas_btns.c pr_err("unable to allocate input device\n"); pr_err 91 drivers/input/misc/atlas_btns.c pr_err("couldn't register input device\n"); pr_err 101 drivers/input/misc/atlas_btns.c pr_err("error installing addr spc handler\n"); pr_err 116 drivers/input/misc/atlas_btns.c pr_err("error removing addr spc handler\n"); pr_err 309 drivers/input/misc/ideapad_slidebar.c pr_err("DMI does not match\n"); pr_err 315 drivers/input/misc/ideapad_slidebar.c pr_err("Not enough memory\n"); pr_err 323 drivers/input/misc/ideapad_slidebar.c pr_err("Failed to register platform device\n"); pr_err 329 drivers/input/misc/ideapad_slidebar.c pr_err("Failed to register platform driver\n"); pr_err 200 drivers/input/misc/pmic8xxx-pwrkey.c pr_err("%s: regulator already disabled\n", __func__); pr_err 2062 drivers/input/mouse/psmouse-base.c pr_err("failed to create kpsmoused workqueue\n"); pr_err 298 drivers/input/mouse/psmouse-smbus.c pr_err("failed to register i2c bus notifier: %d\n", error); pr_err 89 drivers/input/mouse/pxa930_trkball.c pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v); pr_err 831 drivers/input/mousedev.c pr_err("failed to reserve mixdev minor: %d\n", minor); pr_err 836 drivers/input/mousedev.c pr_err("failed to reserve new minor: %d\n", minor); pr_err 311 drivers/input/rmi4/rmi_bus.c pr_err("driver_register() failed for %s, error: %d\n", pr_err 397 drivers/input/rmi4/rmi_bus.c pr_err("%s: error registering the RMI F%02x handler: %d\n", pr_err 434 drivers/input/rmi4/rmi_bus.c pr_err("%s: error registering the RMI bus: %d\n", pr_err 445 drivers/input/rmi4/rmi_bus.c pr_err("%s: error registering the RMI physical driver: %d\n", pr_err 1268 drivers/input/rmi4/rmi_driver.c pr_err("%s: driver register failed, code=%d.\n", __func__, pr_err 588 drivers/input/rmi4/rmi_f11.c pr_err("Invalid finger state[%d]: 0x%02x", i, pr_err 417 drivers/input/serio/i8042.c pr_err("Can't reactivate %s port\n", port_name); pr_err 614 drivers/input/serio/i8042.c pr_err("Failed to enable KBD port\n"); pr_err 633 drivers/input/serio/i8042.c pr_err("Failed to enable AUX port\n"); pr_err 725 drivers/input/serio/i8042.c pr_err("Failed to disable AUX port, can't use MUX\n"); pr_err 948 drivers/input/serio/i8042.c pr_err("i8042 controller selftest timeout\n"); pr_err 970 drivers/input/serio/i8042.c pr_err("i8042 controller selftest failed\n"); pr_err 993 drivers/input/serio/i8042.c pr_err("Unable to get stable CTR read\n"); pr_err 1001 drivers/input/serio/i8042.c pr_err("Can't read CTR while initializing i8042\n"); pr_err 1052 drivers/input/serio/i8042.c pr_err("Can't write CTR while initializing i8042\n"); pr_err 1191 drivers/input/serio/i8042.c pr_err("CTR write retry failed\n"); pr_err 266 drivers/input/serio/serio.c pr_err("Not enough memory to queue event %d\n", event_type); pr_err 831 drivers/input/serio/serio.c pr_err("driver_register() failed for %s, error: %d\n", pr_err 1034 drivers/input/serio/serio.c pr_err("Failed to register serio bus, error: %d\n", error); pr_err 264 drivers/interconnect/core.c pr_err("%s: invalid index %u\n", __func__, idx); pr_err 537 drivers/interconnect/core.c pr_err("%s: error (%d)\n", __func__, ret); pr_err 370 drivers/interconnect/qcom/qcs404.c pr_err("qcom_icc_rpm_smd_send mas %d error %d\n", pr_err 382 drivers/interconnect/qcom/qcs404.c pr_err("qcom_icc_rpm_smd_send slv error %d\n", pr_err 398 drivers/interconnect/qcom/qcs404.c pr_err("%s clk_set_rate error: %d\n", pr_err 709 drivers/interconnect/qcom/sdm845.c pr_err("Error invalidating RPMH client (%d)\n", ret); pr_err 716 drivers/interconnect/qcom/sdm845.c pr_err("Error sending AMC RPMH requests (%d)\n", ret); pr_err 743 drivers/interconnect/qcom/sdm845.c pr_err("Error sending WAKE RPMH requests (%d)\n", ret); pr_err 751 drivers/interconnect/qcom/sdm845.c pr_err("Error sending SLEEP RPMH requests (%d)\n", ret); pr_err 521 drivers/iommu/amd_iommu.c pr_err("DTE[%d]: %016llx\n", i, pr_err 531 drivers/iommu/amd_iommu.c pr_err("CMD[%d]: %08x\n", i, cmd->data[i]); pr_err 549 drivers/iommu/amd_iommu.c pr_err("Event logged [IO_PAGE_FAULT device=%02x:%02x.%x domain=0x%04x address=0x%llx flags=0x%04x]\n", pr_err 577 drivers/iommu/amd_iommu.c pr_err("No event written to event log\n"); pr_err 771 drivers/iommu/amd_iommu.c pr_err("GA log notifier failed.\n"); pr_err 1043 drivers/iommu/amd_iommu.c pr_err("Command buffer timeout\n"); pr_err 2806 drivers/iommu/amd_iommu.c pr_err("Reserving MSI range failed\n"); pr_err 2814 drivers/iommu/amd_iommu.c pr_err("Reserving HT range failed\n"); pr_err 2980 drivers/iommu/amd_iommu.c pr_err("Failed to allocate\n"); pr_err 437 drivers/iommu/amd_iommu_init.c pr_err("Can not reserve memory region %llx-%llx for mmio\n", pr_err 439 drivers/iommu/amd_iommu_init.c pr_err("This is a BIOS bug. Please contact your hardware vendor\n"); pr_err 506 drivers/iommu/amd_iommu_init.c pr_err("Unsupported IVHD type %#x\n", h->type); pr_err 547 drivers/iommu/amd_iommu_init.c pr_err(FW_BUG "IVRS invalid checksum\n"); pr_err 883 drivers/iommu/amd_iommu_init.c pr_err("IOMMU:%d should use the same dev table as others!\n", pr_err 891 drivers/iommu/amd_iommu_init.c pr_err("The device table size of IOMMU:%d is not expected!\n", pr_err 905 drivers/iommu/amd_iommu_init.c pr_err("The address of old device table is above 4G, not trustworthy!\n"); pr_err 920 drivers/iommu/amd_iommu_init.c pr_err("Failed to allocate memory for copying old device table!\n"); pr_err 950 drivers/iommu/amd_iommu_init.c pr_err("Wrong old irq remapping flag: %#x\n", devid); pr_err 1169 drivers/iommu/amd_iommu_init.c pr_err("Unsupported IVHD type %#x\n", h->type); pr_err 1339 drivers/iommu/amd_iommu_init.c pr_err(FW_BUG "Invalid IVHD device type %#x\n", pr_err 1348 drivers/iommu/amd_iommu_init.c pr_err(FW_BUG "Invalid HID.\n"); pr_err 2020 drivers/iommu/amd_iommu_init.c pr_err("Failed to register irq affinity notifier (devid=%#x, irq %d)\n", pr_err 2326 drivers/iommu/amd_iommu_init.c pr_err("Failed to copy DEV table from previous kernel.\n"); pr_err 2469 drivers/iommu/amd_iommu_init.c pr_err("%s: IOAPIC[%d] not in IVRS table\n", pr_err 2487 drivers/iommu/amd_iommu_init.c pr_err("%s: No southbridge IOAPIC found\n", fw_bug); pr_err 2491 drivers/iommu/amd_iommu_init.c pr_err("Disabling interrupt remapping\n"); pr_err 2547 drivers/iommu/amd_iommu_init.c pr_err("IVRS table error: %s\n", err); pr_err 2708 drivers/iommu/amd_iommu_init.c pr_err("IVRS table error: %s\n", err); pr_err 2984 drivers/iommu/amd_iommu_init.c pr_err("Invalid command line: ivrs_ioapic%s\n", str); pr_err 2989 drivers/iommu/amd_iommu_init.c pr_err("Early IOAPIC map overflow - ignoring ivrs_ioapic%s\n", pr_err 3014 drivers/iommu/amd_iommu_init.c pr_err("Invalid command line: ivrs_hpet%s\n", str); pr_err 3019 drivers/iommu/amd_iommu_init.c pr_err("Early HPET map overflow - ignoring ivrs_hpet%s\n", pr_err 3044 drivers/iommu/amd_iommu_init.c pr_err("Invalid command line: ivrs_acpihid(%s)\n", str); pr_err 3053 drivers/iommu/amd_iommu_init.c pr_err("Invalid command line: hid or uid\n"); pr_err 760 drivers/iommu/dmar.c pr_err("Failed to find handle for ACPI object %s\n", pr_err 765 drivers/iommu/dmar.c pr_err("Failed to get device for ACPI object %s\n", pr_err 943 drivers/iommu/dmar.c pr_err("Can't reserve memory\n"); pr_err 950 drivers/iommu/dmar.c pr_err("Can't map the region\n"); pr_err 974 drivers/iommu/dmar.c pr_err("Can't reserve memory\n"); pr_err 980 drivers/iommu/dmar.c pr_err("Can't map the region\n"); pr_err 1036 drivers/iommu/dmar.c pr_err("Failed to allocate seq_id\n"); pr_err 1043 drivers/iommu/dmar.c pr_err("Failed to map %s\n", iommu->name); pr_err 1050 drivers/iommu/dmar.c pr_err("Cannot get a valid agaw for iommu (seq_id = %d)\n", pr_err 1056 drivers/iommu/dmar.c pr_err("Cannot get a valid max agaw for iommu (seq_id = %d)\n", pr_err 1184 drivers/iommu/dmar.c pr_err("VT-d detected invalid descriptor: qw0 = %llx, qw1 = %llx\n", pr_err 1694 drivers/iommu/dmar.c pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index %llx [fault reason %02d] %s\n", pr_err 1699 drivers/iommu/dmar.c pr_err("[%s] Request device [%02x:%02x.%d] PASID %x fault addr %llx [fault reason %02d] %s\n", pr_err 1721 drivers/iommu/dmar.c pr_err("DRHD: handling fault status reg %x\n", fault_status); pr_err 1800 drivers/iommu/dmar.c pr_err("No free IRQ vectors\n"); pr_err 1806 drivers/iommu/dmar.c pr_err("Can't request irq\n"); pr_err 1823 drivers/iommu/dmar.c pr_err("DRHD %Lx: failed to enable fault, interrupt, ret %d\n", pr_err 1108 drivers/iommu/exynos-iommu.c pr_err("%s: Failed(%d) to map %#zx bytes @ %#x\n", pr_err 1204 drivers/iommu/exynos-iommu.c pr_err("%s: Failed: size(%#zx) @ %#x is smaller than page size %#zx\n", pr_err 1354 drivers/iommu/exynos-iommu.c pr_err("%s: Failed to create kmem cache\n", __func__); pr_err 1360 drivers/iommu/exynos-iommu.c pr_err("%s: Failed to register driver\n", __func__); pr_err 1366 drivers/iommu/exynos-iommu.c pr_err("%s: Failed to allocate zero level2 page table\n", pr_err 1374 drivers/iommu/exynos-iommu.c pr_err("%s: Failed to register exynos-iommu driver.\n", pr_err 1230 drivers/iommu/fsl_pamu.c pr_err("could not find a PAMU node\n"); pr_err 1236 drivers/iommu/fsl_pamu.c pr_err("could not register driver (err=%i)\n", ret); pr_err 1242 drivers/iommu/fsl_pamu.c pr_err("could not allocate device %pOF\n", np); pr_err 1254 drivers/iommu/fsl_pamu.c pr_err("could not add device %pOF (err=%i)\n", np, ret); pr_err 1073 drivers/iommu/fsl_pamu_domain.c pr_err("Can't register iommu device\n"); pr_err 1197 drivers/iommu/intel-iommu.c pr_err("Allocating root entry for %s failed\n", pr_err 1335 drivers/iommu/intel-iommu.c pr_err("Flush IOTLB failed\n"); pr_err 1617 drivers/iommu/intel-iommu.c pr_err("%s: Allocating domain id array failed\n", pr_err 1631 drivers/iommu/intel-iommu.c pr_err("%s: Allocating domain array failed\n", pr_err 1746 drivers/iommu/intel-iommu.c pr_err("%s: No free domain ids\n", iommu->name); pr_err 1804 drivers/iommu/intel-iommu.c pr_err("Reserve IOAPIC range failed\n"); pr_err 2677 drivers/iommu/intel-iommu.c pr_err("Reserving iova failed\n"); pr_err 3135 drivers/iommu/intel-iommu.c pr_err("%s: Failed to copy context table for bus %d\n", pr_err 3206 drivers/iommu/intel-iommu.c pr_err("Allocating global iommu array failed\n"); pr_err 3269 drivers/iommu/intel-iommu.c pr_err("Failed to copy translation tables from previous kernel for %s\n", pr_err 4047 drivers/iommu/intel-iommu.c pr_err("Couldn't create iommu_domain cache\n"); pr_err 4064 drivers/iommu/intel-iommu.c pr_err("Couldn't create devinfo cache\n"); pr_err 5001 drivers/iommu/intel-iommu.c pr_err("Initialization failed\n"); pr_err 5174 drivers/iommu/intel-iommu.c pr_err("Can't allocate dmar_domain\n"); pr_err 5178 drivers/iommu/intel-iommu.c pr_err("Domain initialization failed\n"); pr_err 5275 drivers/iommu/intel-iommu.c pr_err("Can't allocate default pasid\n"); pr_err 5462 drivers/iommu/intel-iommu.c pr_err("%s: iommu width (%d) is not " pr_err 479 drivers/iommu/intel-pasid.c pr_err("No first level translation support on %s\n", pr_err 494 drivers/iommu/intel-pasid.c pr_err("No supervisor request support on %s\n", pr_err 507 drivers/iommu/intel-pasid.c pr_err("VT-d has no 5-level paging support for CPU\n"); pr_err 553 drivers/iommu/intel-pasid.c pr_err("No second level translation support on %s\n", pr_err 56 drivers/iommu/intel-svm.c pr_err("IOMMU: %s: Failed to create IRQ vector for page request queue\n", pr_err 71 drivers/iommu/intel-svm.c pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n", pr_err 559 drivers/iommu/intel-svm.c pr_err("%s: Page request without PASID: %08llx %08llx\n", pr_err 574 drivers/iommu/intel-svm.c pr_err("%s: Page request for invalid PASID %d: %08llx %08llx\n", pr_err 121 drivers/iommu/intel_irq_remapping.c pr_err("Requested mask %x exceeds the max invalidation handle" pr_err 546 drivers/iommu/intel_irq_remapping.c pr_err("IR%d: failed to allocate pages of order %d\n", pr_err 553 drivers/iommu/intel_irq_remapping.c pr_err("IR%d: failed to allocate bitmap\n", iommu->seq_id); pr_err 568 drivers/iommu/intel_irq_remapping.c pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id); pr_err 592 drivers/iommu/intel_irq_remapping.c pr_err("Failed to enable queued invalidation\n"); pr_err 606 drivers/iommu/intel_irq_remapping.c pr_err("Failed to copy IR table for %s from previous kernel\n", pr_err 761 drivers/iommu/intel_irq_remapping.c pr_err("Failed to setup irq remapping for %s\n", pr_err 991 drivers/iommu/intel_irq_remapping.c pr_err(FW_BUG "ioapic %d has no mapping iommu, " pr_err 1475 drivers/iommu/intel_irq_remapping.c pr_err("Failed to setup irq remapping for %s\n", pr_err 902 drivers/iommu/io-pgtable-arm-v7s.c pr_err("selftest: failed to allocate io pgtable ops\n"); pr_err 1132 drivers/iommu/io-pgtable-arm.c pr_err("cfg: pgsize_bitmap 0x%lx, ias %u-bit\n", pr_err 1134 drivers/iommu/io-pgtable-arm.c pr_err("data: %d levels, 0x%zx pgd_size, %lu pg_shift, %lu bits_per_level, pgd @ %p\n", pr_err 1164 drivers/iommu/io-pgtable-arm.c pr_err("selftest: failed to allocate io pgtable ops\n"); pr_err 1884 drivers/iommu/iommu.c pr_err("unaligned: iova 0x%lx pa %pa size 0x%zx min_pagesz 0x%x\n", pr_err 1944 drivers/iommu/iommu.c pr_err("unaligned: iova 0x%lx size 0x%zx min_pagesz 0x%x\n", pr_err 590 drivers/iommu/msm_iommu.c pr_err("FAR = %08x PAR = %08x\n", pr_err 592 drivers/iommu/msm_iommu.c pr_err("FSR = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr, pr_err 604 drivers/iommu/msm_iommu.c pr_err("FSYNR0 = %08x FSYNR1 = %08x\n", pr_err 606 drivers/iommu/msm_iommu.c pr_err("TTBR0 = %08x TTBR1 = %08x\n", pr_err 608 drivers/iommu/msm_iommu.c pr_err("SCTLR = %08x ACTLR = %08x\n", pr_err 669 drivers/iommu/msm_iommu.c pr_err("Invalid device ID in context interrupt handler\n"); pr_err 673 drivers/iommu/msm_iommu.c pr_err("Unexpected IOMMU page fault!\n"); pr_err 674 drivers/iommu/msm_iommu.c pr_err("base = %08x\n", (unsigned int)iommu->base); pr_err 683 drivers/iommu/msm_iommu.c pr_err("Fault occurred in context %d.\n", i); pr_err 684 drivers/iommu/msm_iommu.c pr_err("Interesting registers:\n"); pr_err 790 drivers/iommu/msm_iommu.c pr_err("Invalid PAR value detected\n"); pr_err 801 drivers/iommu/msm_iommu.c pr_err("Request IRQ %d failed with ret=%d\n", iommu->irq, ret); pr_err 810 drivers/iommu/msm_iommu.c pr_err("Could not add msm-smmu at %pa to sysfs\n", &ioaddr); pr_err 819 drivers/iommu/msm_iommu.c pr_err("Could not register msm-smmu at %pa\n", &ioaddr); pr_err 864 drivers/iommu/msm_iommu.c pr_err("Failed to register IOMMU driver\n"); pr_err 875 drivers/iommu/mtk_iommu.c pr_err("Failed to register MTK IOMMU driver\n"); pr_err 1183 drivers/iommu/omap-iommu.c pr_err("%s: only DT-based devices are supported\n", __func__); pr_err 1842 drivers/iommu/omap-iommu.c pr_err("%s: failed to register driver\n", __func__); pr_err 754 drivers/iommu/rockchip-iommu.c pr_err("iova: %pad already mapped to %pa cannot remap to phys: %pa prot: %#x\n", pr_err 259 drivers/irqchip/exynos-combiner.c pr_err("%s: failed to map combiner registers\n", __func__); pr_err 151 drivers/irqchip/irq-al-fic.c pr_err("fail to add irq domain\n"); pr_err 161 drivers/irqchip/irq-al-fic.c pr_err("fail to allocate generic chip (%d)\n", ret); pr_err 227 drivers/irqchip/irq-al-fic.c pr_err("fail to register irqchip\n"); pr_err 250 drivers/irqchip/irq-al-fic.c pr_err("%s: unsupported - device require a parent\n", pr_err 257 drivers/irqchip/irq-al-fic.c pr_err("%s: fail to map memory\n", node->name); pr_err 263 drivers/irqchip/irq-al-fic.c pr_err("%s: fail to map irq\n", node->name); pr_err 273 drivers/irqchip/irq-al-fic.c pr_err("%s: fail to initialize irqchip (%lu)\n", pr_err 198 drivers/irqchip/irq-alpine-msi.c pr_err("Failed to find the GIC node\n"); pr_err 204 drivers/irqchip/irq-alpine-msi.c pr_err("Failed to find the GIC domain\n"); pr_err 212 drivers/irqchip/irq-alpine-msi.c pr_err("Failed to create the MSIX middle domain\n"); pr_err 222 drivers/irqchip/irq-alpine-msi.c pr_err("Failed to create MSI domain\n"); pr_err 245 drivers/irqchip/irq-alpine-msi.c pr_err("Failed to allocate resource\n"); pr_err 260 drivers/irqchip/irq-alpine-msi.c pr_err("Unable to parse MSI base\n"); pr_err 266 drivers/irqchip/irq-alpine-msi.c pr_err("Unable to parse MSI numbers\n"); pr_err 140 drivers/irqchip/irq-ath79-misc.c pr_err("Failed to get MISC IRQ\n"); pr_err 146 drivers/irqchip/irq-ath79-misc.c pr_err("Failed to get MISC IRQ registers\n"); pr_err 153 drivers/irqchip/irq-ath79-misc.c pr_err("Failed to add MISC irqdomain\n"); pr_err 271 drivers/irqchip/irq-bcm6345-l1.c pr_err("failed to map parent interrupt %d\n", cpu->parent_irq); pr_err 316 drivers/irqchip/irq-bcm6345-l1.c pr_err("failed to init intc L1 for cpu %d: %d\n", pr_err 281 drivers/irqchip/irq-bcm7038-l1.c pr_err("failed to map parent interrupt %d\n", parent_irq); pr_err 334 drivers/irqchip/irq-bcm7038-l1.c pr_err("failed to remap intc L1 registers\n"); pr_err 118 drivers/irqchip/irq-bcm7120-l2.c pr_err("failed to map interrupt %d\n", irq); pr_err 156 drivers/irqchip/irq-bcm7120-l2.c pr_err("unable to map registers\n"); pr_err 169 drivers/irqchip/irq-bcm7120-l2.c pr_err("invalid brcm,int-fwd-mask property\n"); pr_err 176 drivers/irqchip/irq-bcm7120-l2.c pr_err("invalid brcm,int-map-mask property\n"); pr_err 206 drivers/irqchip/irq-bcm7120-l2.c pr_err("unable to map registers\n"); pr_err 234 drivers/irqchip/irq-bcm7120-l2.c pr_err("invalid number of parent interrupts\n"); pr_err 273 drivers/irqchip/irq-bcm7120-l2.c pr_err("failed to allocate generic irq chip\n"); pr_err 177 drivers/irqchip/irq-brcmstb-l2.c pr_err("failed to remap intc L2 registers\n"); pr_err 192 drivers/irqchip/irq-brcmstb-l2.c pr_err("failed to find parent interrupt\n"); pr_err 215 drivers/irqchip/irq-brcmstb-l2.c pr_err("failed to allocate generic irq chip\n"); pr_err 214 drivers/irqchip/irq-crossbar.c pr_err("missing 'ti,max-crossbar-sources' property\n"); pr_err 221 drivers/irqchip/irq-crossbar.c pr_err("missing 'ti,max-irqs' property\n"); pr_err 244 drivers/irqchip/irq-crossbar.c pr_err("Invalid reserved entry\n"); pr_err 262 drivers/irqchip/irq-crossbar.c pr_err("Invalid skip entry\n"); pr_err 288 drivers/irqchip/irq-crossbar.c pr_err("Invalid reg-size property\n"); pr_err 340 drivers/irqchip/irq-crossbar.c pr_err("%pOF: no parent, giving up\n", node); pr_err 346 drivers/irqchip/irq-crossbar.c pr_err("%pOF: unable to obtain parent domain\n", node); pr_err 359 drivers/irqchip/irq-crossbar.c pr_err("%pOF: failed to allocated domain\n", node); pr_err 107 drivers/irqchip/irq-csky-apb-intc.c pr_err("C-SKY Intc not a root irq controller\n"); pr_err 113 drivers/irqchip/irq-csky-apb-intc.c pr_err("C-SKY Intc unable to map: %p.\n", node); pr_err 120 drivers/irqchip/irq-csky-apb-intc.c pr_err("C-SKY Intc irq_domain_add failed.\n"); pr_err 128 drivers/irqchip/irq-csky-apb-intc.c pr_err("C-SKY Intc irq_alloc_gc failed.\n"); pr_err 91 drivers/irqchip/irq-davinci-aintc.c pr_err("%s: register range busy\n", __func__); pr_err 98 drivers/irqchip/irq-davinci-aintc.c pr_err("%s: unable to ioremap register range\n", __func__); pr_err 134 drivers/irqchip/irq-davinci-aintc.c pr_err("%s: unable to allocate interrupt descriptors: %d\n", pr_err 143 drivers/irqchip/irq-davinci-aintc.c pr_err("%s: unable to create interrupt domain\n", __func__); pr_err 151 drivers/irqchip/irq-davinci-aintc.c pr_err("%s: unable to allocate generic irq chips for domain\n", pr_err 170 drivers/irqchip/irq-davinci-cp-intc.c pr_err("%s: register range busy\n", __func__); pr_err 177 drivers/irqchip/irq-davinci-cp-intc.c pr_err("%s: unable to ioremap register range\n", __func__); pr_err 211 drivers/irqchip/irq-davinci-cp-intc.c pr_err("%s: unable to allocate interrupt descriptors: %d\n", pr_err 221 drivers/irqchip/irq-davinci-cp-intc.c pr_err("%s: unable to create an interrupt domain\n", __func__); pr_err 246 drivers/irqchip/irq-davinci-cp-intc.c pr_err("%s: unable to get the register range from device-tree\n", pr_err 253 drivers/irqchip/irq-davinci-cp-intc.c pr_err("%s: unable to read the 'ti,intc-size' property\n", pr_err 81 drivers/irqchip/irq-digicolor.c pr_err("%pOF: unable to map IC registers\n", node); pr_err 91 drivers/irqchip/irq-digicolor.c pr_err("%pOF: unable to map UC registers\n", node); pr_err 100 drivers/irqchip/irq-digicolor.c pr_err("%pOF: unable to create IRQ domain\n", node); pr_err 108 drivers/irqchip/irq-digicolor.c pr_err("%pOF: unable to allocate IRQ gc\n", node); pr_err 82 drivers/irqchip/irq-dw-apb-ictl.c pr_err("%pOF: unable to parse irq\n", np); pr_err 88 drivers/irqchip/irq-dw-apb-ictl.c pr_err("%pOF: unable to get resource\n", np); pr_err 93 drivers/irqchip/irq-dw-apb-ictl.c pr_err("%pOF: unable to request mem region\n", np); pr_err 99 drivers/irqchip/irq-dw-apb-ictl.c pr_err("%pOF: unable to map resource\n", np); pr_err 126 drivers/irqchip/irq-dw-apb-ictl.c pr_err("%pOF: unable to add irq domain\n", np); pr_err 135 drivers/irqchip/irq-dw-apb-ictl.c pr_err("%pOF: unable to alloc irq domain gc\n", np); pr_err 141 drivers/irqchip/irq-eznps.c pr_err("DeviceTree incore ic not a root irq controller\n"); pr_err 149 drivers/irqchip/irq-eznps.c pr_err("nps400 root irq domain not avail\n"); pr_err 70 drivers/irqchip/irq-gic-realview.c pr_err("RealView GIC setup: could not find syscon\n"); pr_err 239 drivers/irqchip/irq-gic-v2m.c pr_err("Invalid MSI base SPI (base:%u)\n", base); pr_err 244 drivers/irqchip/irq-gic-v2m.c pr_err("Number of SPIs (%u) exceed maximum (%u)\n", pr_err 292 drivers/irqchip/irq-gic-v2m.c pr_err("Failed to create GICv2m domain\n"); pr_err 305 drivers/irqchip/irq-gic-v2m.c pr_err("Failed to create MSI domains\n"); pr_err 326 drivers/irqchip/irq-gic-v2m.c pr_err("Failed to allocate struct v2m_data.\n"); pr_err 338 drivers/irqchip/irq-gic-v2m.c pr_err("Failed to map GICv2m resource\n"); pr_err 432 drivers/irqchip/irq-gic-v2m.c pr_err("Failed to allocate v2m resource.\n"); pr_err 530 drivers/irqchip/irq-gic-v2m.c pr_err("Unable to allocate GICv2m domain token\n"); pr_err 84 drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c pr_err("%pOF: unable to locate ITS domain\n", np); pr_err 93 drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c pr_err("%pOF: unable to create fsl-mc domain\n", np); pr_err 115 drivers/irqchip/irq-gic-v3-its-pci-msi.c pr_err("%s: Unable to locate ITS domain\n", name); pr_err 121 drivers/irqchip/irq-gic-v3-its-pci-msi.c pr_err("%s: Unable to create PCI domain\n", name); pr_err 164 drivers/irqchip/irq-gic-v3-its-pci-msi.c pr_err("%s: Unable to locate ITS domain handle\n", node_name); pr_err 93 drivers/irqchip/irq-gic-v3-its-platform-msi.c pr_err("%s: unable to locate ITS domain\n", name); pr_err 99 drivers/irqchip/irq-gic-v3-its-platform-msi.c pr_err("%s: unable to create platform domain\n", name); pr_err 122 drivers/irqchip/irq-gic-v3-its-platform-msi.c pr_err("%s: Unable to locate ITS domain handle\n", node_name); pr_err 1712 drivers/irqchip/irq-gic-v3-its.c pr_err("Failed to allocate PROPBASE\n"); pr_err 1788 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS: no 52bit PA support when psz=%d\n", psz); pr_err 1859 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: %s doesn't stick: %llx %llx\n", pr_err 2079 drivers/irqchip/irq-gic-v3-its.c pr_err("Failed to allocate PENDBASE for CPU%d\n", cpu); pr_err 3374 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: failed to quiesce: %d\n", pr_err 3423 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: failed to quiesce on resume: %d\n", pr_err 3508 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS: Can't allocate GICv4 proxy device array\n"); pr_err 3517 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS: Can't allocate GICv4 proxy device\n"); pr_err 3545 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: No ITSList entry available!\n", pr_err 3561 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: Duplicate ITSList entry %d\n", pr_err 3708 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: failed probing (%d)\n", &res->start, err); pr_err 3764 drivers/irqchip/irq-gic-v3-its.c pr_err("CPU%d: Timeout while disabling LPIs\n", pr_err 3778 drivers/irqchip/irq-gic-v3-its.c pr_err("CPU%d: Failed to disable LPIs\n", smp_processor_id()); pr_err 3874 drivers/irqchip/irq-gic-v3-its.c pr_err("SRAT: Invalid header length %d in ITS affinity\n", pr_err 3882 drivers/irqchip/irq-gic-v3-its.c pr_err("SRAT: Invalid NUMA node %d in ITS affinity\n", node); pr_err 3946 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: Unable to allocate GICv3 ITS domain token\n", pr_err 3954 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS@%pa: Unable to register GICv3 ITS domain token (ITS ID %d) to IORT\n", pr_err 4014 drivers/irqchip/irq-gic-v3-its.c pr_err("ITS: Disabling GICv4 support\n"); pr_err 445 drivers/irqchip/irq-gic-v3.c pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq); pr_err 482 drivers/irqchip/irq-gic-v3.c pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq); pr_err 893 drivers/irqchip/irq-gic-v3.c pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n"); pr_err 1564 drivers/irqchip/irq-gic-v3.c pr_err("Failed to initialize MBIs\n"); pr_err 1735 drivers/irqchip/irq-gic-v3.c pr_err("%pOF: unable to map gic dist registers\n", node); pr_err 1741 drivers/irqchip/irq-gic-v3.c pr_err("%pOF: no distributor detected, giving up\n", node); pr_err 1762 drivers/irqchip/irq-gic-v3.c pr_err("%pOF: couldn't map region %d\n", node, i); pr_err 1831 drivers/irqchip/irq-gic-v3.c pr_err("Couldn't map GICR region @%llx\n", redist->base_address); pr_err 2053 drivers/irqchip/irq-gic-v3.c pr_err("Unable to map GICD registers\n"); pr_err 2059 drivers/irqchip/irq-gic-v3.c pr_err("No distributor detected at @%p, giving up\n", pr_err 223 drivers/irqchip/irq-gic-v4.c pr_err("ITS: No GICv4 VPE domain allocated\n"); pr_err 1608 drivers/irqchip/irq-gic.c pr_err("No valid GICC entries exist\n"); pr_err 1614 drivers/irqchip/irq-gic.c pr_err("Unable to map GICC registers\n"); pr_err 1622 drivers/irqchip/irq-gic.c pr_err("Unable to map GICD registers\n"); pr_err 1640 drivers/irqchip/irq-gic.c pr_err("Unable to allocate domain handle\n"); pr_err 1647 drivers/irqchip/irq-gic.c pr_err("Failed to initialise GIC\n"); pr_err 73 drivers/irqchip/irq-goldfish-pic.c pr_err("Failed to map parent IRQ!\n"); pr_err 80 drivers/irqchip/irq-goldfish-pic.c pr_err("Failed to map base address!\n"); pr_err 91 drivers/irqchip/irq-goldfish-pic.c pr_err("Failed to allocate chip structures!\n"); pr_err 110 drivers/irqchip/irq-goldfish-pic.c pr_err("Failed to add irqdomain!\n"); pr_err 131 drivers/irqchip/irq-goldfish-pic.c pr_err("Failed to initialize! (errno = %d)\n", ret); pr_err 397 drivers/irqchip/irq-hip04.c pr_err("failed to allocate IRQ numbers\n"); pr_err 358 drivers/irqchip/irq-i8259.c pr_err("Failed to map i8259 parent IRQ\n"); pr_err 212 drivers/irqchip/irq-imx-gpcv2.c pr_err("%pOF: no parent, giving up\n", node); pr_err 218 drivers/irqchip/irq-imx-gpcv2.c pr_err("%pOF: unknown compatibility string\n", node); pr_err 226 drivers/irqchip/irq-imx-gpcv2.c pr_err("%pOF: unable to get parent domain\n", node); pr_err 232 drivers/irqchip/irq-imx-gpcv2.c pr_err("%pOF: kzalloc failed!\n", node); pr_err 240 drivers/irqchip/irq-imx-gpcv2.c pr_err("%pOF: unable to map gpc registers\n", node); pr_err 82 drivers/irqchip/irq-jcore-aic.c pr_err("Unable to map AIC for cpu %u\n", cpu); pr_err 188 drivers/irqchip/irq-lpc32xx.c pr_err("%pOF: unable to map registers\n", node); pr_err 205 drivers/irqchip/irq-lpc32xx.c pr_err("unable to add irq domain\n"); pr_err 178 drivers/irqchip/irq-ls-scfg-msi.c pr_err("failed to teardown msi. Invalid hwirq %d\n", pos); pr_err 123 drivers/irqchip/irq-ls1x.c pr_err("ls1x-irq: unable to get parent irq\n"); pr_err 132 drivers/irqchip/irq-ls1x.c pr_err("ls1x-irq: cannot add IRQ domain\n"); pr_err 142 drivers/irqchip/irq-ls1x.c pr_err("ls1x-irq: unable to register IRQ domain\n"); pr_err 121 drivers/irqchip/irq-meson-gpio.c pr_err("No channel available\n"); pr_err 316 drivers/irqchip/irq-meson-gpio.c pr_err("failed to allocate gic irq %u\n", *channel_hwirq); pr_err 370 drivers/irqchip/irq-meson-gpio.c pr_err("can't get %d channel interrupts\n", NUM_CHANNEL); pr_err 385 drivers/irqchip/irq-meson-gpio.c pr_err("missing parent interrupt node\n"); pr_err 391 drivers/irqchip/irq-meson-gpio.c pr_err("unable to obtain parent domain\n"); pr_err 417 drivers/irqchip/irq-meson-gpio.c pr_err("failed to add domain\n"); pr_err 689 drivers/irqchip/irq-mips-gic.c pr_err("No CPU vectors available\n"); pr_err 705 drivers/irqchip/irq-mips-gic.c pr_err("Failed to get memory range\n"); pr_err 763 drivers/irqchip/irq-mips-gic.c pr_err("Failed to add IRQ domain"); pr_err 772 drivers/irqchip/irq-mips-gic.c pr_err("Failed to add IPI domain"); pr_err 165 drivers/irqchip/irq-mmp.c pr_err("Spurious irq %d in MMP INTC\n", irq); pr_err 379 drivers/irqchip/irq-mmp.c pr_err("Not found mrvl,intc-nr-irqs property\n"); pr_err 385 drivers/irqchip/irq-mmp.c pr_err("Failed to get interrupt controller register\n"); pr_err 396 drivers/irqchip/irq-mmp.c pr_err("Failed to mapping hwirq\n"); pr_err 457 drivers/irqchip/irq-mmp.c pr_err("Failed to get interrupt controller register #2\n"); pr_err 496 drivers/irqchip/irq-mmp.c pr_err("Not found mrvl,intc-nr-irqs property\n"); pr_err 510 drivers/irqchip/irq-mmp.c pr_err("Not found reg property\n"); pr_err 526 drivers/irqchip/irq-mmp.c pr_err("Failed to mapping hwirq\n"); pr_err 75 drivers/irqchip/irq-mscc-ocelot.c pr_err("%pOFn: unable to add irq domain\n", node); pr_err 83 drivers/irqchip/irq-mscc-ocelot.c pr_err("%pOFn: unable to alloc irq domain gc\n", node); pr_err 90 drivers/irqchip/irq-mscc-ocelot.c pr_err("%pOFn: unable to map resource\n", node); pr_err 252 drivers/irqchip/irq-mtk-cirq.c pr_err("mtk_cirq: interrupt-parent not found\n"); pr_err 262 drivers/irqchip/irq-mtk-cirq.c pr_err("mtk_cirq: unable to map cirq register\n"); pr_err 131 drivers/irqchip/irq-mtk-sysirq.c pr_err("mtk_sysirq: interrupt-parent not found\n"); pr_err 143 drivers/irqchip/irq-mtk-sysirq.c pr_err("mtk_sysirq: base address not specified\n"); pr_err 173 drivers/irqchip/irq-mtk-sysirq.c pr_err("%pOF: couldn't map region %d\n", node, i); pr_err 108 drivers/irqchip/irq-mvebu-odmi.c pr_err("Cannot allocate parent IRQ\n"); pr_err 131 drivers/irqchip/irq-mvebu-odmi.c pr_err("Failed to teardown msi. Invalid hwirq %lu\n", d->hwirq); pr_err 445 drivers/irqchip/irq-mvebu-sei.c pr_err("Failed to create CPs IRQ domain\n"); pr_err 456 drivers/irqchip/irq-mvebu-sei.c pr_err("Failed to create CPs MSI domain\n"); pr_err 156 drivers/irqchip/irq-ompic.c pr_err("ompic: duplicate ompic's are not supported"); pr_err 161 drivers/irqchip/irq-ompic.c pr_err("ompic: reg property requires an address and size"); pr_err 166 drivers/irqchip/irq-ompic.c pr_err("ompic: reg size, currently %d must be at least %d", pr_err 175 drivers/irqchip/irq-ompic.c pr_err("ompic: unable to map registers"); pr_err 181 drivers/irqchip/irq-ompic.c pr_err("ompic: unable to parse device irq"); pr_err 153 drivers/irqchip/irq-orion.c pr_err("%pOFn: unable to add irq domain\n", np); pr_err 160 drivers/irqchip/irq-orion.c pr_err("%pOFn: unable to alloc irq domain gc\n", np); pr_err 166 drivers/irqchip/irq-orion.c pr_err("%pOFn: unable to get resource\n", np); pr_err 171 drivers/irqchip/irq-orion.c pr_err("%s: unable to request mem region\n", np->name); pr_err 178 drivers/irqchip/irq-orion.c pr_err("%pOFn: unable to parse irq\n", np); pr_err 185 drivers/irqchip/irq-orion.c pr_err("%pOFn: unable to map resource\n", np); pr_err 190 drivers/irqchip/irq-partition-percpu.c pr_err("Failed to find partition\n"); pr_err 150 drivers/irqchip/irq-s3c24xx.c pr_err("No such irq type %d\n", type); pr_err 198 drivers/irqchip/irq-s3c24xx.c pr_err("No such irq type %d\n", type); pr_err 454 drivers/irqchip/irq-s3c24xx.c pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); pr_err 462 drivers/irqchip/irq-s3c24xx.c pr_err("irq-s3c24xx: parent irq %lu is out of range\n", pr_err 475 drivers/irqchip/irq-s3c24xx.c pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", pr_err 574 drivers/irqchip/irq-s3c24xx.c pr_err("irq: unsupported controller address\n"); pr_err 585 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create irq-domain\n"); pr_err 685 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create main interrupt controller\n"); pr_err 787 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create main interrupt controller\n"); pr_err 886 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create main interrupt controller\n"); pr_err 965 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create main interrupt controller\n"); pr_err 1038 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create main interrupt controller\n"); pr_err 1128 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create main interrupt controller\n"); pr_err 1180 drivers/irqchip/irq-s3c24xx.c pr_err("controller number %d invalid\n", intspec[0]); pr_err 1199 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not map parent interrupt\n"); pr_err 1234 drivers/irqchip/irq-s3c24xx.c pr_err("irq-s3c24xx: could not map irq registers\n"); pr_err 1241 drivers/irqchip/irq-s3c24xx.c pr_err("irq: could not create irq-domain\n"); pr_err 251 drivers/irqchip/irq-sifive-plic.c pr_err("failed to parse parent for context %d.\n", i); pr_err 218 drivers/irqchip/irq-sni-exiu.c pr_err("%pOF: no parent, giving up\n", node); pr_err 224 drivers/irqchip/irq-sni-exiu.c pr_err("%pOF: unable to obtain parent domain\n", node); pr_err 229 drivers/irqchip/irq-sni-exiu.c pr_err("%pOF: failed to parse memory resource\n", node); pr_err 240 drivers/irqchip/irq-sni-exiu.c pr_err("%pOF: failed to allocate domain\n", node); pr_err 305 drivers/irqchip/irq-stm32-exti.c pr_err("%s can't get hwspinlock (%d)\n", __func__, ret); pr_err 670 drivers/irqchip/irq-stm32-exti.c pr_err("%pOF: Unable to map registers\n", node); pr_err 730 drivers/irqchip/irq-stm32-exti.c pr_err("%pOFn: Could not register interrupt domain.\n", pr_err 739 drivers/irqchip/irq-stm32-exti.c pr_err("%pOF: Could not allocate generic interrupt chip.\n", pr_err 151 drivers/irqchip/irq-sun4i.c pr_err("kzalloc failed!\n"); pr_err 168 drivers/irqchip/irq-sun4i.c pr_err("kzalloc failed!\n"); pr_err 137 drivers/irqchip/irq-sunxi-nmi.c pr_err("Cannot assign multiple trigger modes to IRQ %d.\n", pr_err 171 drivers/irqchip/irq-sunxi-nmi.c pr_err("Could not register interrupt domain.\n"); pr_err 179 drivers/irqchip/irq-sunxi-nmi.c pr_err("Could not allocate generic interrupt chip.\n"); pr_err 185 drivers/irqchip/irq-sunxi-nmi.c pr_err("unable to parse irq\n"); pr_err 193 drivers/irqchip/irq-sunxi-nmi.c pr_err("unable to map resource\n"); pr_err 116 drivers/irqchip/irq-tango.c pr_err("Invalid trigger mode %x for IRQ %d\n", pr_err 71 drivers/irqchip/irq-tb10x.c pr_err("%s: Cannot assign multiple trigger modes to IRQ %d.\n", pr_err 106 drivers/irqchip/irq-tb10x.c pr_err("%pOFn: No registers declared in DeviceTree.\n", pr_err 113 drivers/irqchip/irq-tb10x.c pr_err("%pOFn: Request mem region failed.\n", ictl); pr_err 120 drivers/irqchip/irq-tb10x.c pr_err("%pOFn: ioremap failed.\n", ictl); pr_err 128 drivers/irqchip/irq-tb10x.c pr_err("%pOFn: Could not register interrupt domain.\n", pr_err 138 drivers/irqchip/irq-tb10x.c pr_err("%pOFn: Could not allocate generic interrupt chip.\n", pr_err 285 drivers/irqchip/irq-tegra.c pr_err("%pOF: no parent, giving up\n", node); pr_err 291 drivers/irqchip/irq-tegra.c pr_err("%pOF: unable to obtain parent domain\n", node); pr_err 323 drivers/irqchip/irq-tegra.c pr_err("%pOF: no valid regions, giving up\n", node); pr_err 337 drivers/irqchip/irq-tegra.c pr_err("%pOF: failed to allocated domain\n", node); pr_err 156 drivers/irqchip/irq-versatile-fpga.c pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_VERSATILE_FPGA_IRQ_NR\n", __func__); pr_err 187 drivers/irqchip/irq-vf610-mscm-ir.c pr_err("vf610_mscm_ir: interrupt-parent not found\n"); pr_err 197 drivers/irqchip/irq-vf610-mscm-ir.c pr_err("vf610_mscm_ir: unable to map mscm register\n"); pr_err 205 drivers/irqchip/irq-vf610-mscm-ir.c pr_err("vf610_mscm_ir: regmap lookup for cpucfg failed\n"); pr_err 197 drivers/irqchip/irq-vt8500.c pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n", pr_err 207 drivers/irqchip/irq-vt8500.c pr_err("%s: Unable to map IO memory\n", __func__); pr_err 212 drivers/irqchip/irq-vt8500.c pr_err("%s: Unable to add irq domain!\n", __func__); pr_err 228 drivers/irqchip/irq-vt8500.c pr_err("%s: Incorrect IRQ map for slaved controller\n", pr_err 161 drivers/irqchip/irq-xilinx-intc.c pr_err("irq-xilinx: Multiple instances aren't supported\n"); pr_err 176 drivers/irqchip/irq-xilinx-intc.c pr_err("irq-xilinx: unable to read xlnx,num-intr-inputs\n"); pr_err 212 drivers/irqchip/irq-xilinx-intc.c pr_err("irq-xilinx: Unable to create IRQ domain\n"); pr_err 223 drivers/irqchip/irq-xilinx-intc.c pr_err("irq-xilinx: interrupts property not in DT\n"); pr_err 278 drivers/irqchip/qcom-pdc.c pr_err("%pOF: unable to map PDC registers\n", node); pr_err 284 drivers/irqchip/qcom-pdc.c pr_err("%pOF: unable to find PDC's parent domain\n", node); pr_err 291 drivers/irqchip/qcom-pdc.c pr_err("%pOF: failed to init PDC pin-hwirq mapping\n", node); pr_err 299 drivers/irqchip/qcom-pdc.c pr_err("%pOF: GIC domain add failed\n", node); pr_err 227 drivers/irqchip/spear-shirq.c pr_err("%s: failed to map shirq registers\n", __func__); pr_err 236 drivers/irqchip/spear-shirq.c pr_err("%s: irq desc alloc failed\n", __func__); pr_err 189 drivers/isdn/hardware/mISDN/mISDNisar.c pr_err("%s: ISAR wrong version %d firmware download aborted\n", pr_err 177 drivers/leds/leds-apu.c pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n"); pr_err 183 drivers/leds/leds-apu.c pr_err("Device allocation failed\n"); pr_err 189 drivers/leds/leds-apu.c pr_err("Probe platform driver failed\n"); pr_err 185 drivers/leds/leds-clevo-mail.c pr_err("Skipping DMI detection. " pr_err 199 drivers/leds/leds-clevo-mail.c pr_err("Can't probe platform driver\n"); pr_err 410 drivers/leds/leds-mlxcpld.c pr_err("Device allocation failed\n"); pr_err 416 drivers/leds/leds-mlxcpld.c pr_err("Probe platform driver failed\n"); pr_err 53 drivers/leds/leds-pm8058.c pr_err("Failed to set LED brightness\n"); pr_err 66 drivers/leds/leds-pm8058.c pr_err("Failed to get LED brightness\n"); pr_err 158 drivers/leds/trigger/ledtrig-cpu.c pr_err("CPU hotplug notifier for ledtrig-cpu could not be registered: %d\n", pr_err 79 drivers/lightnvm/core.c pr_err("lun %d already allocated\n", i); pr_err 269 drivers/lightnvm/core.c pr_err("lun out of bound (%u:%u > %u)\n", pr_err 302 drivers/lightnvm/core.c pr_err("invalid over provisioning value\n"); pr_err 339 drivers/lightnvm/core.c pr_err("config type not valid\n"); pr_err 345 drivers/lightnvm/core.c pr_err("target type %s not found\n", create->tgttype); pr_err 350 drivers/lightnvm/core.c pr_err("device is incompatible with target L2P type.\n"); pr_err 355 drivers/lightnvm/core.c pr_err("target name already exists (%s)\n", pr_err 372 drivers/lightnvm/core.c pr_err("could not create target device\n"); pr_err 499 drivers/lightnvm/core.c pr_err("failed to remove target %s\n", pr_err 694 drivers/lightnvm/core.c pr_err("failed to allocate dma memory\n"); pr_err 1081 drivers/lightnvm/core.c pr_err("unable to update all blocks atomically\n"); pr_err 1144 drivers/lightnvm/core.c pr_err("device could not be identified\n"); pr_err 1153 drivers/lightnvm/core.c pr_err("could not initialize core structures.\n"); pr_err 1163 drivers/lightnvm/core.c pr_err("failed to initialize nvm\n"); pr_err 1201 drivers/lightnvm/core.c pr_err("could not create dma pool\n"); pr_err 1246 drivers/lightnvm/core.c pr_err("device not found\n"); pr_err 1320 drivers/lightnvm/core.c pr_err("max 31 devices can be reported.\n"); pr_err 1347 drivers/lightnvm/core.c pr_err("reserved config field in use\n"); pr_err 1363 drivers/lightnvm/core.c pr_err("flag not supported\n"); pr_err 1381 drivers/lightnvm/core.c pr_err("no flags supported\n"); pr_err 1397 drivers/lightnvm/core.c pr_err("no flags supported\n"); pr_err 712 drivers/lightnvm/pblk.h pr_err("pblk %s: " fmt, pblk->disk->disk_name, ##__VA_ARGS__) pr_err 482 drivers/macintosh/adb.c pr_err("Two handlers for ADB device %d\n", pr_err 887 drivers/macintosh/adb.c pr_err("adb: unable to get major %d\n", ADB_MAJOR); pr_err 271 drivers/macintosh/adbhid.c pr_err("ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n", pr_err 410 drivers/macintosh/adbhid.c pr_err("ADB HID on ID %d not yet registered\n", id); pr_err 508 drivers/macintosh/adbhid.c pr_err("ADB HID on ID %d not yet registered\n", id); pr_err 763 drivers/macintosh/adbhid.c pr_err("Trying to reregister ADB HID on ID %d\n", id); pr_err 1096 drivers/macintosh/adbhid.c pr_err("%s: bad length for reg. 1\n", __func__); pr_err 370 drivers/macintosh/via-cuda.c pr_err("Timeout waiting for " what "\n"); \ pr_err 723 drivers/macintosh/via-cuda.c pr_err("cuda_interrupt: unknown cuda_state %d?\n", cuda_state); pr_err 785 drivers/macintosh/via-cuda.c pr_err("%s: got %d byte reply\n", __func__, req.reply_len); pr_err 803 drivers/macintosh/via-cuda.c pr_err("%s: got %d byte reply\n", __func__, req.reply_len); pr_err 483 drivers/macintosh/via-pmu.c pr_err("%s: couldn't get SR irq\n", __func__); pr_err 488 drivers/macintosh/via-pmu.c pr_err("%s: couldn't get CL irq\n", __func__); pr_err 1752 drivers/macintosh/via-pmu.c pr_err("%s: got %d byte reply\n", __func__, req.reply_len); pr_err 1769 drivers/macintosh/via-pmu.c pr_err("%s: got %d byte reply\n", __func__, req.reply_len); pr_err 255 drivers/macintosh/windfarm_ad7417_sensor.c pr_err("wf_ad7417: Can't identify location %s\n", loc); pr_err 87 drivers/macintosh/windfarm_cpufreq_clamp.c pr_err("%s: Failed to add freq constraint (%d)\n", __func__, pr_err 103 drivers/macintosh/windfarm_fcu_controls.c pr_err("Failure writing address to FCU: %d", nw); pr_err 116 drivers/macintosh/windfarm_fcu_controls.c pr_err("wf_fcu: Failure reading data from FCU: %d", nw); pr_err 140 drivers/macintosh/windfarm_fcu_controls.c pr_err("wf_fcu: Failure writing to FCU: %d", nw); pr_err 392 drivers/macintosh/windfarm_fcu_controls.c pr_err("wf_fcu: Failed to register fan %s\n", name); pr_err 538 drivers/macintosh/windfarm_fcu_controls.c pr_err("wf_fcu: Initialization failed !\n"); pr_err 555 drivers/macintosh/windfarm_fcu_controls.c pr_err("wf_fcu: Failed to find fans for your machine\n"); pr_err 817 drivers/macintosh/windfarm_pm72.c pr_err("wf_pm72: Failed to find MPU data for CPU %d\n", i); pr_err 709 drivers/macintosh/windfarm_rm31.c pr_err("wf_rm31: Failed to find MPU data for CPU %d\n", i); pr_err 371 drivers/mailbox/omap-mailbox.c pr_err("failed to register mailbox interrupt:%d\n", ret); pr_err 428 drivers/mailbox/omap-mailbox.c pr_err("%s: please use mbox_request_channel(), this API is supported only for OMAP non-DT usage\n", pr_err 455 drivers/mailbox/omap-mailbox.c pr_err("Unable to startup the chan (%d)\n", ret); pr_err 686 drivers/mailbox/omap-mailbox.c pr_err("%s: could not find node phandle 0x%x\n", pr_err 715 drivers/mailbox/omap-mailbox.c pr_err("%s: only DT-based devices are supported\n", __func__); pr_err 403 drivers/mailbox/pcc.c pr_err("PCC GSI %d not registered\n", pr_err 416 drivers/mailbox/pcc.c pr_err("Failed to ioremap PCC ACK register\n"); pr_err 466 drivers/mailbox/pcc.c pr_err("Could not allocate space for PCC mbox channels\n"); pr_err 564 drivers/mailbox/pcc.c pr_err("Err registering PCC as Mailbox controller: %d\n", ret); pr_err 241 drivers/mcb/mcb-core.c pr_err("Failed registering device 16z%03d on bus mcb%d (%d)\n", pr_err 200 drivers/mcb/mcb-parse.c pr_err("Unsupported chameleon version 0x%x\n", pr_err 234 drivers/mcb/mcb-parse.c pr_err("Invalid chameleon descriptor type 0x%x\n", pr_err 28 drivers/md/bcache/bset.c pr_err("block %u key %u/%u: ", set, pr_err 34 drivers/md/bcache/bset.c pr_err("%llu:%llu\n", KEY_INODE(k), KEY_OFFSET(k)); pr_err 39 drivers/md/bcache/bset.c pr_err("Key skipped backwards\n"); pr_err 2349 drivers/md/bcache/btree.c pr_err("error %i", ret); pr_err 77 drivers/md/bcache/debug.c pr_err("*** in memory:\n"); pr_err 80 drivers/md/bcache/debug.c pr_err("*** read back in:\n"); pr_err 87 drivers/md/bcache/debug.c pr_err("*** on disk block %u:\n", block); pr_err 91 drivers/md/bcache/debug.c pr_err("*** block %zu not written\n", pr_err 98 drivers/md/bcache/debug.c pr_err("b->written %u\n", b->written); pr_err 133 drivers/md/bcache/extents.c pr_err(" %s", buf); pr_err 138 drivers/md/bcache/extents.c pr_err(" bucket %zu", n); pr_err 140 drivers/md/bcache/extents.c pr_err(" prio %i", pr_err 144 drivers/md/bcache/extents.c pr_err(" %s\n", bch_ptr_status(b->c, k)); pr_err 75 drivers/md/bcache/io.c pr_err("%s: IO error on backing device, unrecoverable", pr_err 126 drivers/md/bcache/io.c pr_err("%s: IO error on %s%s", pr_err 376 drivers/md/bcache/journal.c pr_err("bcache: journal entries %llu-%llu missing! (replaying %llu-%llu)", pr_err 486 drivers/md/bcache/journal.c pr_err("BUG: flush_write bit should not be set here!"); pr_err 540 drivers/md/bcache/journal.c pr_err("BUG: btree_nodes[%d] is NULL", i); pr_err 546 drivers/md/bcache/journal.c pr_err("BUG: bnode %p: journal_flush bit cleaned", b); pr_err 665 drivers/md/bcache/request.c pr_err("Can't flush %s: returned bi_status %i", pr_err 723 drivers/md/bcache/super.c pr_err("Couldn't create device -> cache set symlink"); pr_err 727 drivers/md/bcache/super.c pr_err("Couldn't create cache set -> device symlink"); pr_err 786 drivers/md/bcache/super.c pr_err("bcache device (NULL gendisk) stopped"); pr_err 825 drivers/md/bcache/super.c pr_err("nr_stripes too large or invalid: %u (start sector beyond end of disk?)", pr_err 924 drivers/md/bcache/super.c pr_err("%s: device offline for %d seconds", pr_err 927 drivers/md/bcache/super.c pr_err("%s: disable I/O request due to backing " pr_err 955 drivers/md/bcache/super.c pr_err("I/O disabled on cached dev %s", pr_err 997 drivers/md/bcache/super.c pr_err("Couldn't create bcache dev <-> disk sysfs symlinks"); pr_err 1113 drivers/md/bcache/super.c pr_err("Can't attach %s: already attached", pr_err 1119 drivers/md/bcache/super.c pr_err("Can't attach %s: shutting down", pr_err 1126 drivers/md/bcache/super.c pr_err("Couldn't attach %s: block size less than set's block size", pr_err 1134 drivers/md/bcache/super.c pr_err("Tried to attach %s but duplicate UUID already attached", pr_err 1153 drivers/md/bcache/super.c pr_err("Couldn't find uuid for %s in set", pr_err 1160 drivers/md/bcache/super.c pr_err("Not caching %s, no room for UUID", pr_err 1206 drivers/md/bcache/super.c pr_err("Couldn't start writeback facilities for %s", pr_err 1229 drivers/md/bcache/super.c pr_err("Couldn't run cached device %s", pr_err 1495 drivers/md/bcache/super.c pr_err("Can't create volume, no room for UUID"); pr_err 1520 drivers/md/bcache/super.c pr_err("stop %s: too many IO errors on backing device %s\n", pr_err 1546 drivers/md/bcache/super.c pr_err("bcache: error on %pU: ", c->sb.set_uuid); pr_err 1552 drivers/md/bcache/super.c pr_err(", disabling caching\n"); pr_err 423 drivers/md/bcache/sysfs.c pr_err("Can't attach %s: cache set not found", buf); pr_err 457 drivers/md/bcache/sysfs.c pr_err("%s: failed to run non-existent writeback thread", pr_err 413 drivers/md/md-bitmap.c pr_err("md: bitmap read error: (%dB @ %llu): %d\n", pr_err 1991 drivers/md/md-bitmap.c pr_err("%s can't get bitmap from slot %d\n", __func__, slot); pr_err 201 drivers/md/md-cluster.c pr_err("md-cluster: Unable to allocate resource name for resource %s\n", name); pr_err 208 drivers/md/md-cluster.c pr_err("md-cluster: Unable to allocate LVB for resource %s\n", name); pr_err 221 drivers/md/md-cluster.c pr_err("md-cluster: Unable to lock NL on new lock resource %s\n", name); pr_err 249 drivers/md/md-cluster.c pr_err("failed to unlock %s return %d\n", res->name, ret); pr_err 301 drivers/md/md-cluster.c pr_err("md-cluster: Cannot initialize bitmaps\n"); pr_err 307 drivers/md/md-cluster.c pr_err("md-cluster: Could not DLM lock %s: %d\n", pr_err 313 drivers/md/md-cluster.c pr_err("md-cluster: Could not copy data from bitmap %d\n", slot); pr_err 632 drivers/md/md-cluster.c pr_err("md/raid1:failed to get CR on MESSAGE\n"); pr_err 691 drivers/md/md-cluster.c pr_err("md-cluster(%s:%d): failed to get EX on TOKEN (%d)\n", pr_err 740 drivers/md/md-cluster.c pr_err("md-cluster: failed to get EX on MESSAGE (%d)\n", error); pr_err 749 drivers/md/md-cluster.c pr_err("md-cluster: failed to convert EX to CW on MESSAGE(%d)\n", pr_err 757 drivers/md/md-cluster.c pr_err("md-cluster: failed to convert CR to EX on ACK(%d)\n", pr_err 765 drivers/md/md-cluster.c pr_err("md-cluster: failed to convert EX to CR on ACK(%d)\n", pr_err 773 drivers/md/md-cluster.c pr_err("md-cluster: failed convert to NL on MESSAGE(%d)\n", pr_err 881 drivers/md/md-cluster.c pr_err("md-cluster: Slot allotted(%d) is greater than available slots(%d).", pr_err 890 drivers/md/md-cluster.c pr_err("md-cluster: cannot allocate memory for recv_thread!\n"); pr_err 906 drivers/md/md-cluster.c pr_err("md-cluster: can't join cluster to avoid lock issue\n"); pr_err 916 drivers/md/md-cluster.c pr_err("md-cluster: failed to get a sync CR lock on ACK!(%d)\n", pr_err 921 drivers/md/md-cluster.c pr_err("md-cluster: failed to get a sync CR lock on no-new-dev!(%d)\n", ret); pr_err 932 drivers/md/md-cluster.c pr_err("Failed to get bitmap lock\n"); pr_err 967 drivers/md/md-cluster.c pr_err("md-cluster: failed to gather all resyn infos\n"); pr_err 983 drivers/md/md-cluster.c pr_err("%s:%d: failed to send BITMAP_NEEDS_SYNC message (%d)\n", pr_err 1113 drivers/md/md-cluster.c pr_err("%s:%d: failed to send BITMAP_RESIZE message (%d)\n", pr_err 1141 drivers/md/md-cluster.c pr_err("can't get bitmap from slot %d\n", i); pr_err 1153 drivers/md/md-cluster.c pr_err("Cannot initialize %s lock\n", str); pr_err 1201 drivers/md/md-cluster.c pr_err("can't get bitmap from slot %d\n", i); pr_err 1212 drivers/md/md-cluster.c pr_err("md-cluster: Cannot initialize %s\n", str); pr_err 1274 drivers/md/md-cluster.c pr_err("%s:%d: failed to send METADATA_UPDATED msg\n", pr_err 1280 drivers/md/md-cluster.c pr_err("md-cluster: No good device id found to send\n"); pr_err 1295 drivers/md/md-cluster.c pr_err("%s:%d: failed to send CHANGE_CAPACITY msg\n", pr_err 1306 drivers/md/md-cluster.c pr_err("%s:%d: failed to send METADATA_UPDATED msg\n", pr_err 1483 drivers/md/md-cluster.c pr_err("md: can't alloc mem for other bitmap locks\n"); pr_err 294 drivers/md/md-linear.c pr_err("md/linear:%s: make_request: Sector %llu out of bounds on dev %s: %llu sectors, offset %llu\n", pr_err 205 drivers/md/md-multipath.c pr_err("multipath: IO failure on %s, disabling IO path.\n" pr_err 336 drivers/md/md-multipath.c pr_err("multipath: %s: unrecoverable IO read error for block %llu\n", pr_err 341 drivers/md/md-multipath.c pr_err("multipath: %s: redirecting sector %llu to another IO path\n", pr_err 164 drivers/md/md.c pr_err("can't alloc memory pool for writemostly\n"); pr_err 853 drivers/md/md.c pr_err("md: super_written gets error=%d\n", bio->bi_status); pr_err 958 drivers/md/md.c pr_err("md: disabled device %s, could not read superblock.\n", pr_err 2244 drivers/md/md.c pr_err("md: failed to create integrity pool for %s\n", pr_err 2270 drivers/md/md.c pr_err("%s: incompatible integrity profile for %s\n", pr_err 155 drivers/md/raid0.c pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n", pr_err 157 drivers/md/raid0.c pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n"); pr_err 734 drivers/md/raid0.c pr_err("md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n", pr_err 3753 drivers/md/raid10.c pr_err("only near layout is supported by clustered" pr_err 3825 drivers/md/raid10.c pr_err("md/raid10:%s: not enough operational mirrors.\n", pr_err 2164 drivers/md/raid5-cache.c pr_err("md/raid:%s: Cannot increase cache size, ret=%d, new_size=%d, min_nr_stripes=%d, max_nr_stripes=%d\n", pr_err 2176 drivers/md/raid5-cache.c pr_err("md/raid:%s: Cannot get enough stripes due to memory pressure. Recovery failed.\n", pr_err 2364 drivers/md/raid5-cache.c pr_err("md/raid:%s: cannot allocate memory to rewrite data only stripes\n", pr_err 2500 drivers/md/raid5-cache.c pr_err("md/raid:%s: failed to rewrite stripes to journal\n", pr_err 3087 drivers/md/raid5-cache.c pr_err("md/raid:%s: write journal/cache doesn't work for array with %d disks\n", pr_err 513 drivers/md/raid5.c pr_err("sector=%llx i=%d %p %p %p %p %d\n", pr_err 4119 drivers/md/raid5.c pr_err("%s: unknown check_state: %d sector: %llu\n", pr_err 112 drivers/media/cec/cec-core.c pr_err("could not get a free minor\n"); pr_err 135 drivers/media/cec/cec-core.c pr_err("%s: cdev_device_add failed\n", __func__); pr_err 303 drivers/media/cec/cec-core.c pr_err("cec-%s: kernel_thread() failed\n", name); pr_err 316 drivers/media/cec/cec-core.c pr_err("cec-%s: failed to allocate memory for rc_dev\n", pr_err 362 drivers/media/cec/cec-core.c pr_err("cec-%s: failed to prepare input device\n", pr_err 1127 drivers/media/cec/cec-pin.c pr_err("cec-pin: kernel_thread() failed\n"); pr_err 98 drivers/media/common/saa7146/saa7146_core.c pr_err("%s: %s timed out while waiting for registers getting programmed\n", pr_err 219 drivers/media/common/siano/sms-cards.c pr_err("Unknown SMS board event\n"); pr_err 448 drivers/media/common/siano/smscoreapi.c pr_err("failed to create smscore_registry.\n"); pr_err 461 drivers/media/common/siano/smscoreapi.c pr_err("No registry found.\n"); pr_err 475 drivers/media/common/siano/smscoreapi.c pr_err("No registry found.\n"); pr_err 488 drivers/media/common/siano/smscoreapi.c pr_err("No registry found.\n"); pr_err 500 drivers/media/common/siano/smscoreapi.c pr_err("No registry found.\n"); pr_err 785 drivers/media/common/siano/smscoreapi.c pr_err("Error initialization DTV IR sub-module\n"); pr_err 807 drivers/media/common/siano/smscoreapi.c pr_err("Sending IR initialization message failed\n"); pr_err 829 drivers/media/common/siano/smscoreapi.c pr_err("no board configuration exist.\n"); pr_err 942 drivers/media/common/siano/smscoreapi.c pr_err("device reload failed, rc %d\n", rc); pr_err 1149 drivers/media/common/siano/smscoreapi.c pr_err("mode %d not supported on this device\n", mode); pr_err 1160 drivers/media/common/siano/smscoreapi.c pr_err("failed to open firmware file '%s'\n", fw_filename); pr_err 1167 drivers/media/common/siano/smscoreapi.c pr_err("failed to allocate firmware buffer\n"); pr_err 1271 drivers/media/common/siano/smscoreapi.c pr_err("MSG_SMS_GET_VERSION_EX_REQ failed first try\n"); pr_err 1279 drivers/media/common/siano/smscoreapi.c pr_err("MSG_SMS_GET_VERSION_EX_REQ failed second try, rc %d\n", pr_err 1340 drivers/media/common/siano/smscoreapi.c pr_err("invalid mode specified %d\n", mode); pr_err 1349 drivers/media/common/siano/smscoreapi.c pr_err("mode detect failed %d\n", rc); pr_err 1371 drivers/media/common/siano/smscoreapi.c pr_err("device init failed, rc %d.\n", rc); pr_err 1375 drivers/media/common/siano/smscoreapi.c pr_err("invalid mode specified %d\n", mode); pr_err 1412 drivers/media/common/siano/smscoreapi.c pr_err("return error code %d.\n", rc); pr_err 1679 drivers/media/common/siano/smscoreapi.c pr_err("bad parameter.\n"); pr_err 1687 drivers/media/common/siano/smscoreapi.c pr_err("The msg ID already registered to another client.\n"); pr_err 1723 drivers/media/common/siano/smscoreapi.c pr_err("Client already exist.\n"); pr_err 1798 drivers/media/common/siano/smscoreapi.c pr_err("Got NULL client\n"); pr_err 1806 drivers/media/common/siano/smscoreapi.c pr_err("Got NULL coredev\n"); pr_err 2011 drivers/media/common/siano/smscoreapi.c pr_err("smscore_gpio_configure timeout\n"); pr_err 2013 drivers/media/common/siano/smscoreapi.c pr_err("smscore_gpio_configure error\n"); pr_err 2060 drivers/media/common/siano/smscoreapi.c pr_err("smscore_gpio_set_level timeout\n"); pr_err 2062 drivers/media/common/siano/smscoreapi.c pr_err("smscore_gpio_set_level error\n"); pr_err 2108 drivers/media/common/siano/smscoreapi.c pr_err("smscore_gpio_get_level timeout\n"); pr_err 2110 drivers/media/common/siano/smscoreapi.c pr_err("smscore_gpio_get_level error\n"); pr_err 519 drivers/media/common/siano/smsdvb-debugfs.c pr_err("Couldn't create sysfs node for smsdvb\n"); pr_err 111 drivers/media/common/siano/smsdvb-main.c pr_err("Unknown dvb3 api event\n"); pr_err 1087 drivers/media/common/siano/smsdvb-main.c pr_err("dvb_register_adapter() failed %d\n", rc); pr_err 1101 drivers/media/common/siano/smsdvb-main.c pr_err("dvb_dmx_init failed %d\n", rc); pr_err 1112 drivers/media/common/siano/smsdvb-main.c pr_err("dvb_dmxdev_init failed %d\n", rc); pr_err 1133 drivers/media/common/siano/smsdvb-main.c pr_err("frontend registration failed %d\n", rc); pr_err 1145 drivers/media/common/siano/smsdvb-main.c pr_err("smscore_register_client() failed %d\n", rc); pr_err 1171 drivers/media/common/siano/smsdvb-main.c pr_err("dvb_create_media_graph failed %d\n", rc); pr_err 83 drivers/media/common/siano/smsir.c pr_err("Failed to register device\n"); pr_err 193 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("Remapping memory failed, error: %d\n", ret); pr_err 314 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("failed to map scatterlist\n"); pr_err 516 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("failed to allocate sg table\n"); pr_err 524 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("failed to initialize sg table\n"); pr_err 535 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("failed to map scatterlist\n"); pr_err 542 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("contiguous mapping is too small %lu/%lu\n", pr_err 585 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("trying to pin a non attached buffer\n"); pr_err 590 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("dmabuf buffer is already pinned\n"); pr_err 597 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("Error getting dmabuf scatterlist\n"); pr_err 604 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("contiguous chunk is too small %lu/%lu b\n", pr_err 623 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("trying to unpin a not attached buffer\n"); pr_err 628 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("dmabuf buffer is already unpinned\n"); pr_err 675 drivers/media/common/videobuf2/videobuf2-dma-contig.c pr_err("failed to attach dmabuf\n"); pr_err 449 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("failed to map scatterlist\n"); pr_err 538 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("trying to pin a non attached buffer\n"); pr_err 543 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("dmabuf buffer is already pinned\n"); pr_err 550 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("Error getting dmabuf scatterlist\n"); pr_err 566 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("trying to unpin a not attached buffer\n"); pr_err 571 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("dmabuf buffer is already unpinned\n"); pr_err 617 drivers/media/common/videobuf2/videobuf2-dma-sg.c pr_err("failed to attach dmabuf\n"); pr_err 156 drivers/media/common/videobuf2/videobuf2-vmalloc.c pr_err("Address of an unallocated plane requested or cannot map user pointer\n"); pr_err 175 drivers/media/common/videobuf2/videobuf2-vmalloc.c pr_err("No memory to map\n"); pr_err 181 drivers/media/common/videobuf2/videobuf2-vmalloc.c pr_err("Remapping vmalloc memory, error: %d\n", ret); pr_err 298 drivers/media/common/videobuf2/videobuf2-vmalloc.c pr_err("failed to map scatterlist\n"); pr_err 724 drivers/media/dvb-core/dmxdev.c pr_err("DVB (%s): could not alloc feed\n", pr_err 732 drivers/media/dvb-core/dmxdev.c pr_err("DVB (%s): could not set feed\n", pr_err 530 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", pr_err 698 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", pr_err 706 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", pr_err 714 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", pr_err 1157 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adaptor %d: PC card did not respond :(\n", pr_err 1174 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n", pr_err 1181 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n", pr_err 1190 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n", pr_err 1205 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n", pr_err 1224 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", pr_err 1234 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", pr_err 1640 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", pr_err 1903 drivers/media/dvb-core/dvb_ca_en50221.c pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n", pr_err 673 drivers/media/dvb-core/dvb_demux.c pr_err("%s: feed already in list (type=%x state=%x pid=%x)\n", pr_err 687 drivers/media/dvb-core/dvb_demux.c pr_err("%s: feed not in list (type=%x state=%x pid=%x)\n", pr_err 371 drivers/media/dvb-core/dvb_net.c pr_err("%lu: Invalid ULE packet (pointer field %d)\n", pr_err 1018 drivers/media/dvb-core/dvb_net.c pr_err("%s: could not get filter\n", dev->name); pr_err 1059 drivers/media/dvb-core/dvb_net.c pr_err("%s: BUG %d\n", __func__, __LINE__); pr_err 1070 drivers/media/dvb-core/dvb_net.c pr_err("%s: could not allocate section feed\n", pr_err 1078 drivers/media/dvb-core/dvb_net.c pr_err("%s: could not set section feed\n", dev->name); pr_err 1119 drivers/media/dvb-core/dvb_net.c pr_err("%s: could not allocate ts feed\n", dev->name); pr_err 1133 drivers/media/dvb-core/dvb_net.c pr_err("%s: could not set ts feed\n", dev->name); pr_err 1182 drivers/media/dvb-core/dvb_net.c pr_err("%s: no feed to stop\n", dev->name); pr_err 1193 drivers/media/dvb-core/dvb_net.c pr_err("%s: no ts feed to stop\n", dev->name); pr_err 470 drivers/media/dvb-core/dvbdev.c pr_err("%s: couldn't find free device id\n", __func__); pr_err 524 drivers/media/dvb-core/dvbdev.c pr_err("%s: dvb_register_media_device failed to create the mediagraph\n", pr_err 540 drivers/media/dvb-core/dvbdev.c pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n", pr_err 1038 drivers/media/dvb-core/dvbdev.c pr_err("dvb-core: unable to get major %d\n", DVB_MAJOR); pr_err 1044 drivers/media/dvb-core/dvbdev.c pr_err("dvb-core: unable register character device\n"); pr_err 107 drivers/media/dvb-frontends/cx24120.c #define err(args...) pr_err("cx24120: ### ERROR: " args) pr_err 93 drivers/media/dvb-frontends/cxd2880/cxd2880_spi_device.c pr_err("spi_setup failed %d\n", result); pr_err 480 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg.\n"); pr_err 494 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg.\n"); pr_err 520 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("cxd2880 integ init failed %d\n", ret); pr_err 529 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("cxd2880 set config failed %d\n", ret); pr_err 545 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 569 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 611 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 626 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid system\n"); pr_err 649 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 664 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid system\n"); pr_err 697 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 707 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("tps monitor error ret = %d\n", ret); pr_err 819 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 1042 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 1109 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid system\n"); pr_err 1131 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 1272 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 1313 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 1334 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid system"); pr_err 1341 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("failed. sys = %d\n", priv->tnrdmd.sys); pr_err 1370 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid system\n"); pr_err 1390 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg."); pr_err 1397 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("cxd2880_set_frontend failed %d\n", ret); pr_err 1420 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg\n"); pr_err 1621 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg.\n"); pr_err 1808 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg."); pr_err 1886 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("invalid arg.\n"); pr_err 1905 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("spi_device_initialize failed. %d\n", ret); pr_err 1913 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("spi_device_create_spi failed. %d\n", ret); pr_err 1920 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("io_spi_create failed. %d\n", ret); pr_err 1927 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("set bank to 0x00 failed.\n"); pr_err 1934 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("read chip id failed.\n"); pr_err 1942 drivers/media/dvb-frontends/cxd2880/cxd2880_top.c pr_err("chip id invalid.\n"); pr_err 143 drivers/media/dvb-frontends/dib3000mb.c pr_err("unknown bandwidth value.\n"); pr_err 492 drivers/media/dvb-frontends/dib3000mb.c pr_err("Unexpected constellation returned by TPS (%d)\n", tps_val); pr_err 519 drivers/media/dvb-frontends/dib3000mb.c pr_err("Unexpected ALPHA value returned by TPS (%d)\n", tps_val); pr_err 556 drivers/media/dvb-frontends/dib3000mb.c pr_err("Unexpected FEC returned by TPS (%d)\n", tps_val); pr_err 579 drivers/media/dvb-frontends/dib3000mb.c pr_err("Unexpected Guard Time returned by TPS (%d)\n", tps_val); pr_err 594 drivers/media/dvb-frontends/dib3000mb.c pr_err("unexpected transmission mode return by TPS (%d)\n", tps_val); pr_err 17 drivers/media/dvb-frontends/dib3000mb_priv.h { pr_err("while sending 0x%04x to 0x%04x.", val, reg); return -EREMOTEIO; } pr_err 21 drivers/media/dvb-frontends/dib3000mb_priv.h pr_err("sizeof: %zu %zu is different", sizeof(a), sizeof(v));\ pr_err 401 drivers/media/dvb-frontends/dibx000_common.c pr_err("incorrect I2C interface selected\n"); pr_err 466 drivers/media/dvb-frontends/dibx000_common.c pr_err("could not initialize the tuner i2c_adapter\n"); pr_err 472 drivers/media/dvb-frontends/dibx000_common.c pr_err("could not initialize the master i2c_adapter\n"); pr_err 478 drivers/media/dvb-frontends/dibx000_common.c pr_err("could not initialize the master i2c_adapter\n"); pr_err 484 drivers/media/dvb-frontends/dibx000_common.c pr_err("could not initialize the master i2c_adapter\n"); pr_err 1349 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("i2c was zero, aborting\n"); pr_err 2147 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2158 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2252 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2291 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2296 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2301 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2306 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2313 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2318 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2334 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2351 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("timeout\n"); pr_err 2357 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2365 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2403 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2437 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2489 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2494 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2499 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2529 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2538 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2543 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2549 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2771 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2778 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2783 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2788 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2793 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2798 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2803 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2809 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2815 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2848 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2853 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2858 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2863 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2868 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2874 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2880 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2886 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2891 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2902 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 2907 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3064 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3069 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3074 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3079 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3084 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3091 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3098 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3103 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3110 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3117 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3122 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3127 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3135 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3141 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3146 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3151 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3156 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3164 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3174 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3179 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3184 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3189 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3194 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3199 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3204 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3209 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3215 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3220 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3225 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3230 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3235 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3240 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3245 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3252 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3258 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3265 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3271 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3276 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3281 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3286 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3291 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3296 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3301 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3306 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3311 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3316 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3321 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3326 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3332 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3338 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3385 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3390 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3395 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3415 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3420 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3425 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3456 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3468 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3503 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3511 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3548 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3568 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3591 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3615 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3637 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3656 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3688 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3710 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3717 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3728 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3749 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3756 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3767 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3788 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3795 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3806 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3828 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3835 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3846 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3858 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3930 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3936 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3942 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3948 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3956 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3961 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3966 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3973 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 3995 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4005 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4011 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4017 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4023 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4029 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4041 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4050 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4069 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4075 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4081 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4087 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4172 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4263 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4268 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4278 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4285 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4292 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4325 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4335 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4342 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4348 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4421 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4426 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4431 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4436 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4441 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4446 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4451 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4456 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4461 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4466 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4471 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4476 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4481 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4504 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4509 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4514 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4519 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4524 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4529 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4534 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4539 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4544 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4549 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4556 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4562 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4568 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4580 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4585 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4590 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4595 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4600 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4605 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4610 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4615 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4620 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4625 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4630 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4635 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4640 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4645 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4650 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4655 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4660 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4665 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4670 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4675 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4680 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4685 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4690 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4695 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4700 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4705 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4719 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4724 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4731 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4738 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4834 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4870 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4941 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4947 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4954 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4971 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4978 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 4984 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5001 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5006 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5014 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5023 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5029 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5036 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5046 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5053 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5062 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5068 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5075 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5081 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5154 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5160 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5167 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5185 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5192 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5198 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5215 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5220 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5226 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5231 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5242 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5248 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5255 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5266 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5273 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5283 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5289 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5296 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5303 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5314 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5358 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5367 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5418 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5425 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5430 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5436 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5441 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5447 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5452 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5457 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5462 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5467 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5475 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5686 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5691 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5754 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5759 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5764 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5769 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5774 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5779 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5784 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5797 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5803 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5808 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5813 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5819 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5824 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5829 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5835 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5840 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5845 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5850 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5855 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5860 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5865 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5870 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5875 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5881 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5886 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5892 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5897 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5902 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5907 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5912 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5917 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5924 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5931 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5937 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5945 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5950 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5955 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5960 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5968 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5973 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5980 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5985 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5990 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 5996 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6001 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6008 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6013 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6018 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6023 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6029 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6036 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6044 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6049 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6055 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6060 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6065 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6076 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6082 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6089 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6094 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6099 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6112 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6127 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6133 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6138 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6143 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6148 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6153 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6158 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6163 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6168 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6181 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6187 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6192 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6197 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6223 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6234 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: period and/or prescale is zero!\n"); pr_err 6262 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6278 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: period and/or prescale is zero!\n"); pr_err 6303 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6324 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6374 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6379 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6391 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6398 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6403 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6409 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6414 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6419 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6424 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6429 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6439 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6533 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: fec_rs_bit_cnt is zero!\n"); pr_err 6569 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6574 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6579 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6586 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6591 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6596 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6630 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: qam_vd_period is zero!\n"); pr_err 6643 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6648 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6691 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6696 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6702 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6707 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6712 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6717 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6722 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6727 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6733 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6738 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6743 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6749 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6754 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6759 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6764 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6769 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6774 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6779 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6785 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6790 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6795 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6800 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6805 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6810 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6815 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6820 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6825 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6830 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6835 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6840 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6845 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6850 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6855 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6860 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6865 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6870 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6875 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6880 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6886 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6926 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6931 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6937 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6942 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6947 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6952 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6957 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6962 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6968 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6973 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6978 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6984 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6989 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6994 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 6999 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7004 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7009 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7014 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7020 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7025 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7030 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7035 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7040 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7045 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7050 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7055 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7060 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7065 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7070 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7075 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7080 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7085 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7090 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7095 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7100 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7105 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7110 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7115 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7121 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7162 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7167 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7173 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7178 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7183 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7188 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7193 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7198 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7204 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7209 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7214 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7220 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7225 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7230 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7235 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7240 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7245 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7250 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7256 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7261 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7266 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7271 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7276 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7281 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7286 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7291 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7296 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7301 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7306 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7311 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7316 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7321 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7326 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7331 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7336 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7341 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7346 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7351 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7357 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7397 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7402 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7408 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7413 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7418 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7423 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7428 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7433 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7439 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7444 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7449 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7455 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7460 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7465 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7470 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7475 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7480 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7485 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7491 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7496 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7501 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7506 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7511 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7516 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7521 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7526 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7531 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7536 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7541 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7546 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7551 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7556 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7561 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7566 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7571 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7576 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7581 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7586 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7592 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7632 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7637 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7643 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7648 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7653 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7658 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7663 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7668 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7674 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7679 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7684 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7690 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7695 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7700 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7705 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7710 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7715 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7720 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7726 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7731 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7736 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7741 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7746 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7751 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7756 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7761 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7766 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7771 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7776 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7781 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7786 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7791 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7796 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7801 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7806 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7811 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7816 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7821 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 7827 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8016 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: channel symbolrate is zero!\n"); pr_err 8061 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8066 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8071 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8076 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8081 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8086 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8091 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8103 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8122 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8134 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8140 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8146 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8157 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8166 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8171 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8180 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8186 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8191 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8196 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8202 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8208 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8213 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8218 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8223 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8228 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8233 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8238 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8244 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8249 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8255 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8261 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8266 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8271 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8281 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8286 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8291 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8299 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8304 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8309 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8320 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8325 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8330 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8335 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8340 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8345 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8350 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8355 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8360 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8365 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8370 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8375 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8380 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8385 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8390 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8395 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8400 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8405 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8410 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8415 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8421 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8426 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8431 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8436 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8441 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8450 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8455 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8461 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8466 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8471 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8482 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8488 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8497 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8502 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8510 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8515 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8522 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8527 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8537 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8542 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8552 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8559 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8566 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8573 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8580 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8592 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8599 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8604 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8609 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8622 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8639 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8646 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8651 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8656 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8685 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8690 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8697 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8702 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8708 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8713 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8723 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8729 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8734 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8741 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8746 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8751 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8758 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8767 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8774 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8779 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8786 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8791 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8799 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8804 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8812 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8817 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8823 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8831 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8837 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8883 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8892 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8909 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8914 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8927 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8932 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8939 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8961 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8967 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 8972 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9030 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9038 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9056 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9121 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9132 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9152 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9158 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9179 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9186 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9193 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9200 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9207 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9214 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9234 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9241 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9248 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9255 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9262 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9268 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9316 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9322 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9328 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9334 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9340 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9389 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9395 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9410 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: rf_agc_max == rf_agc_min\n"); pr_err 9420 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: if_agc_top == if_agc_sns\n"); pr_err 9427 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error: if_agc_sns is zero!\n"); pr_err 9494 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9500 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9506 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9559 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9642 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9762 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9768 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9774 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9780 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9785 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9791 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9796 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9801 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9806 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9811 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9817 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9845 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9872 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9881 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9955 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9960 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9965 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 9997 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10007 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10020 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10096 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10102 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10107 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10112 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10117 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10123 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10128 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10133 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10140 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10147 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10154 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10159 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10166 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10171 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10176 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10181 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10188 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10193 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10198 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10203 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10208 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10215 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10220 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10225 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10230 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10235 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10242 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10247 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10252 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10257 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10262 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10269 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10274 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10279 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10284 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10289 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10296 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10301 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10306 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10311 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10316 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10323 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10328 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10333 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10338 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10343 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10350 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10355 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10363 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10368 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10374 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10379 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10392 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10398 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10403 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10504 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10599 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10606 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10621 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10626 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10636 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10684 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error getting signal strength %d\n", rc); pr_err 10696 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10711 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d getting UCB\n", rc); pr_err 10723 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d getting pre-ber\n", rc); pr_err 10734 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d getting post-ber\n", rc); pr_err 10744 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d getting MER\n", rc); pr_err 10758 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10835 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10896 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10904 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10931 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 10940 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11075 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11103 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11110 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11123 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11140 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11145 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11153 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11160 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11212 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11293 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11370 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11375 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("failed to powerup device\n"); pr_err 11382 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11396 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11401 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11410 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11416 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11421 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11427 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11437 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11443 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11449 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11461 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Should powerup before loading the firmware."); pr_err 11467 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d while uploading the firmware\n", rc); pr_err 11473 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d while verifying the firmware\n", pr_err 11484 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11497 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11522 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11527 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11533 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11571 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11577 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11583 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error %d\n", rc); pr_err 11710 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Firmware is truncated at pos %u/%u\n", count, size); pr_err 11758 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Couldn't read firmware %s\n", mc_file); pr_err 11765 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Firmware is too short!\n"); pr_err 11785 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Firmware magic word doesn't match\n"); pr_err 11827 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("firmware CRC is wrong\n"); pr_err 11844 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error writing firmware at pos %zd\n", pr_err 11868 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error reading firmware at pos %zd\n", pr_err 11877 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("error verifying firmware at pos %zd\n", pr_err 11917 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Failed to setup LNA GPIO!\n"); pr_err 11925 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Failed to %sable LNA!\n", pr_err 11952 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Power state change failed\n"); pr_err 11970 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("drx39xxj: could not get lock status!\n"); pr_err 11977 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("drx says NEVER_LOCK\n"); pr_err 12000 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Lock state unknown %d\n", lock_status); pr_err 12148 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Failed to set standard! result=%02x\n", pr_err 12162 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("Failed to set channel!\n"); pr_err 12204 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("drx39xxj: could not open i2c gate [%d]\n", pr_err 12224 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("drx39xxj_init(): DRX open failed rc=%d!\n", rc); pr_err 12240 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("LNA is not supported on this device!\n"); pr_err 12328 drivers/media/dvb-frontends/drx39xyj/drxj.c pr_err("DRX open failed! Aborting\n"); pr_err 255 drivers/media/dvb-frontends/drxk_hard.c pr_err("i2c write error at addr 0x%02x\n", adr); pr_err 278 drivers/media/dvb-frontends/drxk_hard.c pr_err("i2c read error at addr 0x%02x\n", adr); pr_err 465 drivers/media/dvb-frontends/drxk_hard.c pr_err("%s: i2c write error at addr 0x%02x\n", pr_err 522 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 792 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 838 drivers/media/dvb-frontends/drxk_hard.c pr_err("Clock Frequency is unknown\n"); pr_err 868 drivers/media/dvb-frontends/drxk_hard.c pr_err("Spin %d unknown\n", (sio_top_jtagid_lo >> 29) & 0xF); pr_err 977 drivers/media/dvb-frontends/drxk_hard.c pr_err("DeviceID 0x%02x not supported\n", pr_err 990 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1033 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1078 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1249 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1292 drivers/media/dvb-frontends/drxk_hard.c pr_err("SIO not ready\n"); pr_err 1298 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1354 drivers/media/dvb-frontends/drxk_hard.c pr_err("Firmware is corrupted.\n"); pr_err 1360 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d while loading firmware\n", status); pr_err 1401 drivers/media/dvb-frontends/drxk_hard.c pr_err("SIO not ready\n"); pr_err 1433 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1457 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1485 drivers/media/dvb-frontends/drxk_hard.c pr_err("SCU not ready\n"); pr_err 1524 drivers/media/dvb-frontends/drxk_hard.c pr_err("%s while sending cmd 0x%04x with params:", p, cmd); pr_err 1532 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1568 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1673 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1731 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1812 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1863 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1903 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1924 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 1970 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2108 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2294 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2424 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2445 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2577 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2777 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2795 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2837 drivers/media/dvb-frontends/drxk_hard.c pr_err("SIO not ready\n"); pr_err 2843 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2884 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2928 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 2994 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3029 drivers/media/dvb-frontends/drxk_hard.c pr_err("%s: mode %d is not DVB-C\n", pr_err 3188 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3203 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3324 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3336 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3350 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3370 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3406 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3429 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3469 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3682 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 3716 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4065 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4116 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4129 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4166 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4255 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4442 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4638 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 4832 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5029 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5225 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5253 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5322 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5347 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5690 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5862 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5949 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5974 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 5999 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 6037 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 6261 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error %d on %s\n", status, __func__); pr_err 6274 drivers/media/dvb-frontends/drxk_hard.c pr_err("Could not load firmware file %s.\n", pr_err 6349 drivers/media/dvb-frontends/drxk_hard.c pr_err("Error: get_if_frequency() not defined at tuner. Can't work without it!\n"); pr_err 6856 drivers/media/dvb-frontends/drxk_hard.c pr_err("not found\n"); pr_err 357 drivers/media/dvb-frontends/dvb-pll.c pr_err("%s: i2c_transfer failed:%d", pr_err 427 drivers/media/dvb-frontends/dvb-pll.c pr_err("%s: i2c_transfer failed:%d", pr_err 331 drivers/media/dvb-frontends/gp8psk-fe.c pr_err("Error! gp8psk-fe ops not defined.\n"); pr_err 59 drivers/media/dvb-frontends/lgdt3306a.c pr_err("error %d on line %d\n", ret, __LINE__); \ pr_err 137 drivers/media/dvb-frontends/lgdt3306a.c pr_err("error (addr %02x %02x <- %02x, err = %i)\n", pr_err 161 drivers/media/dvb-frontends/lgdt3306a.c pr_err("error (addr %02x reg %04x error (ret == %i)\n", pr_err 945 drivers/media/dvb-frontends/lgdt3306a.c pr_err("Bad xtalMHz=%d\n", state->cfg->xtalMHz); pr_err 881 drivers/media/dvb-frontends/nxt200x.c pr_err("%s: No firmware uploaded (timeout or file not found?)\n", pr_err 889 drivers/media/dvb-frontends/nxt200x.c pr_err("%s: Writing firmware to device failed\n", __func__); pr_err 948 drivers/media/dvb-frontends/nxt200x.c pr_err("%s: No firmware uploaded (timeout or file not found?)\n", pr_err 956 drivers/media/dvb-frontends/nxt200x.c pr_err("%s: Writing firmware to device failed\n", __func__); pr_err 1197 drivers/media/dvb-frontends/nxt200x.c pr_err("Unknown/Unsupported NXT chip: %*ph\n", 5, buf); pr_err 34 drivers/media/dvb-frontends/tda8261.c pr_err("%s: read error, err=%d\n", __func__, err); pr_err 46 drivers/media/dvb-frontends/tda8261.c pr_err("%s: write error, err=%d\n", __func__, err); pr_err 60 drivers/media/dvb-frontends/tda8261.c pr_err("%s: I/O Error\n", __func__); pr_err 121 drivers/media/dvb-frontends/tda8261.c pr_err("%s: I/O Error\n", __func__); pr_err 129 drivers/media/dvb-frontends/tda8261.c pr_err("%s: I/O Error\n", __func__); pr_err 17 drivers/media/dvb-frontends/tda8261_cfg.h pr_err("%s: Invalid parameter\n", __func__); pr_err 35 drivers/media/dvb-frontends/tda8261_cfg.h pr_err("%s: Invalid parameter\n", __func__); pr_err 48 drivers/media/i2c/s5c73m3/s5c73m3-spi.c pr_err("SPI device is uninitialized\n"); pr_err 2154 drivers/media/i2c/tc358743.c pr_err("%s: failed to register the cec device\n", __func__); pr_err 223 drivers/media/mc/mc-devnode.c pr_err("could not get a free minor\n"); pr_err 251 drivers/media/mc/mc-devnode.c pr_err("%s: cdev_device_add failed\n", __func__); pr_err 431 drivers/media/mc/mc-entity.c pr_err("Pipe active for %s. Can't start for %s\n", pr_err 140 drivers/media/mmc/siano/smssdio.c pr_err("Unable to read interrupt register!\n"); pr_err 147 drivers/media/mmc/siano/smssdio.c pr_err("Unable to allocate data buffer!\n"); pr_err 156 drivers/media/mmc/siano/smssdio.c pr_err("Error %d reading initial block!\n", ret); pr_err 197 drivers/media/mmc/siano/smssdio.c pr_err("Error %d reading data from card!\n", ret); pr_err 215 drivers/media/mmc/siano/smssdio.c pr_err("Error %d reading data from card!\n", pr_err 4337 drivers/media/pci/bt8xx/bttv-cards.c pr_err("PCI-8604PW locked until reset\n"); pr_err 4340 drivers/media/pci/bt8xx/bttv-cards.c pr_err("PCI-8604PW in unknown state %i\n", state); pr_err 4357 drivers/media/pci/bt8xx/bttv-cards.c pr_err("PCI-8604PW invalid transition %i -> %i\n", pr_err 746 drivers/media/pci/bt8xx/bttv-driver.c pr_err("BUG! (btres)\n"); pr_err 2428 drivers/media/pci/bt8xx/bttv-driver.c pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); pr_err 2506 drivers/media/pci/bt8xx/bttv-driver.c pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); pr_err 3841 drivers/media/pci/bt8xx/bttv-driver.c pr_err("%d: IRQ lockup, cleared int mask [", pr_err 3844 drivers/media/pci/bt8xx/bttv-driver.c pr_err("%d: IRQ lockup, clearing GPINT from int mask [", pr_err 3915 drivers/media/pci/bt8xx/bttv-driver.c pr_err("%d: device_create_file 'card' failed\n", btv->c.nr); pr_err 3988 drivers/media/pci/bt8xx/bttv-driver.c pr_err("out of memory\n"); pr_err 4053 drivers/media/pci/bt8xx/bttv-driver.c pr_err("%d: ioremap() failed\n", btv->c.nr); pr_err 4066 drivers/media/pci/bt8xx/bttv-driver.c pr_err("%d: can't get IRQ %d\n", pr_err 96 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_inb error (err == %i)\n", err); pr_err 108 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_outb ERROR !\n"); pr_err 113 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_outb ERROR !\n"); pr_err 126 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_outb ERROR !\n"); pr_err 131 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_outb ERROR !\n"); pr_err 141 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_outb ERROR !\n"); pr_err 152 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_outb ERROR !\n"); pr_err 169 drivers/media/pci/bt8xx/dst.c pr_err("dst_gpio_inb ERROR !\n"); pr_err 211 drivers/media/pci/bt8xx/dst.c pr_err("PIO Enable Failed\n"); pr_err 215 drivers/media/pci/bt8xx/dst.c pr_err("RDC 8820 State RESET Failed.\n"); pr_err 533 drivers/media/pci/bt8xx/dst.c pr_err("DST type flags :\n"); pr_err 535 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x newtuner\n", DST_TYPE_HAS_TS188); pr_err 537 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x newtuner 2\n", DST_TYPE_HAS_NEWTUNE_2); pr_err 539 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x ts204\n", DST_TYPE_HAS_TS204); pr_err 541 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x VLF\n", DST_TYPE_HAS_VLF); pr_err 543 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x symdiv\n", DST_TYPE_HAS_SYMDIV); pr_err 545 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x firmware version = 1\n", DST_TYPE_HAS_FW_1); pr_err 547 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x firmware version = 2\n", DST_TYPE_HAS_FW_2); pr_err 549 drivers/media/pci/bt8xx/dst.c pr_err(" 0x%x firmware version = 3\n", DST_TYPE_HAS_FW_3); pr_err 550 drivers/media/pci/bt8xx/dst.c pr_err("\n"); pr_err 891 drivers/media/pci/bt8xx/dst.c pr_err("MAC Address=[%pM]\n", state->mac_address); pr_err 905 drivers/media/pci/bt8xx/dst.c pr_err("Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x\n", pr_err 927 drivers/media/pci/bt8xx/dst.c pr_err("Device Model=[%s]\n", &state->card_info[0]); pr_err 932 drivers/media/pci/bt8xx/dst.c pr_err("DST has [%s] tuner, tuner type=[%d]\n", pr_err 950 drivers/media/pci/bt8xx/dst.c pr_err("Vendor=[%s]\n", &state->vendor[0]); pr_err 966 drivers/media/pci/bt8xx/dst.c pr_err("Cmd=[0x04] failed\n"); pr_err 972 drivers/media/pci/bt8xx/dst.c pr_err("Found a STV0299 NIM\n"); pr_err 986 drivers/media/pci/bt8xx/dst.c pr_err("Cmd=[0x10], failed\n"); pr_err 992 drivers/media/pci/bt8xx/dst.c pr_err("Found a MB86A15 NIM\n"); pr_err 1007 drivers/media/pci/bt8xx/dst.c pr_err("DST TYpe = MULTI FE\n"); pr_err 1021 drivers/media/pci/bt8xx/dst.c pr_err("DST type has TS=188\n"); pr_err 1031 drivers/media/pci/bt8xx/dst.c pr_err("DST has Daughterboard\n"); pr_err 1039 drivers/media/pci/bt8xx/dst.c pr_err("Forcing [%s] to TS188\n", state->fw_name); pr_err 1090 drivers/media/pci/bt8xx/dst.c pr_err("Recognise [%s]\n", p_dst_type->device_id); pr_err 1099 drivers/media/pci/bt8xx/dst.c pr_err("Unsupported\n"); pr_err 1107 drivers/media/pci/bt8xx/dst.c pr_err("Unsupported\n"); pr_err 1115 drivers/media/pci/bt8xx/dst.c pr_err("[%s] has a [%s]\n", pr_err 1124 drivers/media/pci/bt8xx/dst.c pr_err("Unable to recognize %s or %s\n", &state->rxbuffer[0], &state->rxbuffer[1]); pr_err 1125 drivers/media/pci/bt8xx/dst.c pr_err("please email linux-dvb@linuxtv.org with this type in"); pr_err 1142 drivers/media/pci/bt8xx/dst.c pr_err("RDC 8820 RESET Failed.\n"); pr_err 1150 drivers/media/pci/bt8xx/dst.c pr_err("DST Initialization Failed.\n"); pr_err 1155 drivers/media/pci/bt8xx/dst.c pr_err("unknown device.\n"); pr_err 1198 drivers/media/pci/bt8xx/dst.c pr_err("Recovery Failed.\n"); pr_err 1204 drivers/media/pci/bt8xx/dst.c pr_err("PIO Disable Failed.\n"); pr_err 1716 drivers/media/pci/bt8xx/dst.c pr_err("unknown DST type. please report to the LinuxTV.org DVB mailinglist.\n"); pr_err 657 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("No memory\n"); pr_err 667 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("%s: Could not find a Twinhan DST\n", __func__); pr_err 697 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", pr_err 704 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("Frontend registration failed!\n"); pr_err 718 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_register_adapter failed (errno = %d)\n", result); pr_err 738 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_dmx_init failed (errno = %d)\n", result); pr_err 748 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_dmxdev_init failed (errno = %d)\n", result); pr_err 756 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_dmx_init failed (errno = %d)\n", result); pr_err 764 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_dmx_init failed (errno = %d)\n", result); pr_err 770 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_dmx_init failed (errno = %d)\n", result); pr_err 776 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("dvb_net_init failed (errno = %d)\n", result); pr_err 880 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("Unknown bttv card type: %d\n", sub->core->type); pr_err 888 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("no pci device for card %d\n", card->bttv_nr); pr_err 894 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("unable to determine DMA core of card %d,\n", card->bttv_nr); pr_err 895 drivers/media/pci/bt8xx/dvb-bt8xx.c pr_err("if you have the ALSA bt87x audio driver installed, try removing it.\n"); pr_err 673 drivers/media/pci/cobalt/cobalt-driver.c pr_err("cobalt: v4l2_device_register of card %d failed\n", pr_err 33 drivers/media/pci/cobalt/cobalt-irq.c pr_err("no buffers!\n"); pr_err 763 drivers/media/pci/cx23885/cx23885-417.c pr_err("Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n", pr_err 773 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Mailbox appears to be in use (%x), cmd = %s\n", pr_err 803 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: API Mailbox timeout\n"); pr_err 880 drivers/media/pci/cx23885/cx23885-417.c pr_err("Mailbox signature values not found!\n"); pr_err 915 drivers/media/pci/cx23885/cx23885-417.c pr_err("%s: Error with mc417_register_write\n", pr_err 924 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Hotplug firmware request failed (%s).\n", pr_err 926 drivers/media/pci/cx23885/cx23885-417.c pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n"); pr_err 931 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Firmware size mismatch (have %zu, expected %d)\n", pr_err 938 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Firmware magic mismatch, wrong file?\n"); pr_err 950 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Loading firmware failed!\n"); pr_err 961 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Reading firmware failed!\n"); pr_err 968 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: Firmware load failed (checksum mismatch).\n"); pr_err 993 drivers/media/pci/cx23885/cx23885-417.c pr_err("%s: Error with mc417_register_write\n", pr_err 1045 drivers/media/pci/cx23885/cx23885-417.c pr_err("%s() f/w load failed\n", __func__); pr_err 1050 drivers/media/pci/cx23885/cx23885-417.c pr_err("%s() mailbox < 0, error\n", pr_err 1057 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: cx23417 firmware ping failed!\n"); pr_err 1063 drivers/media/pci/cx23885/cx23885-417.c pr_err("ERROR: cx23417 firmware get encoder :version failed!\n"); pr_err 317 drivers/media/pci/cx23885/cx23885-alsa.c pr_err("BUG: cx23885 can't find device struct. Can't proceed with open\n"); pr_err 579 drivers/media/pci/cx23885/cx23885-alsa.c pr_err("%s(): Failed to register analog audio adapter\n", pr_err 1422 drivers/media/pci/cx23885/cx23885-cards.c pr_err("%s(): Unknown command 0x%x.\n", pr_err 2443 drivers/media/pci/cx23885/cx23885-cards.c pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.", pr_err 725 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: can't get MMIO memory @ 0x%llx\n", pr_err 844 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() New hardware revision found 0x%x\n", pr_err 851 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Hardware revision unknown 0x%x\n", pr_err 984 drivers/media/pci/cx23885/cx23885-core.c pr_err("CORE %s No more PCIe resources for subsystem: %04x:%04x\n", pr_err 1048 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Failed to register analog video adapters on VID_A\n", pr_err 1058 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Failed to register dvb adapters on VID_B\n", pr_err 1064 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Failed to register 417 on VID_B\n", pr_err 1074 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Failed to register dvb on VID_C\n", pr_err 1080 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Failed to register 417 on VID_C\n", pr_err 1424 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n", pr_err 1690 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: V4L mpeg risc op code error, status = 0x%x\n", pr_err 1752 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: mpeg risc op code error\n", dev->name); pr_err 2000 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: Setting GPIO on encoder ports\n", pr_err 2017 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: Clearing GPIO moving on encoder ports\n", pr_err 2034 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: Reading GPIO moving on encoder ports\n", pr_err 2055 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: Enabling GPIO on encoder ports\n", pr_err 2152 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); pr_err 2159 drivers/media/pci/cx23885/cx23885-core.c pr_err("%s: can't get IRQ %d\n", pr_err 1521 drivers/media/pci/cx23885/cx23885-dvb.c pr_err("%s/2: xc4000 attach failed\n", pr_err 1594 drivers/media/pci/cx23885/cx23885-dvb.c pr_err("No LNBH24 found!\n"); pr_err 1614 drivers/media/pci/cx23885/cx23885-dvb.c pr_err("No LNBH24 found!\n"); pr_err 2546 drivers/media/pci/cx23885/cx23885-dvb.c pr_err("%s: frontend initialization failed\n", pr_err 2635 drivers/media/pci/cx23885/cx23885-dvb.c pr_err("%s() failed to alloc\n", __func__); pr_err 2672 drivers/media/pci/cx23885/cx23885-dvb.c pr_err("%s() dvb_register failed err = %d\n", pr_err 115 drivers/media/pci/cx23885/cx23885-f300.c pr_err("%s: timeout, the slave no response\n", pr_err 144 drivers/media/pci/cx23885/cx23885-i2c.c pr_err(" ERR: %d\n", retval); pr_err 205 drivers/media/pci/cx23885/cx23885-i2c.c pr_err(" ERR: %d\n", retval); pr_err 188 drivers/media/pci/cx23885/cx23885-video.c pr_err("%s() error\n", __func__); pr_err 1007 drivers/media/pci/cx23885/cx23885-video.c pr_err("%s() No analog tuner, aborting\n", __func__); pr_err 45 drivers/media/pci/cx23885/netup-eeprom.c pr_err("eeprom i2c read error, status=%d\n", ret); pr_err 73 drivers/media/pci/cx23885/netup-eeprom.c pr_err("eeprom i2c write error, status=%d\n", ret); pr_err 33 drivers/media/pci/cx23885/netup-init.c pr_err("%s: i2c write error!\n", __func__); pr_err 57 drivers/media/pci/cx23885/netup-init.c pr_err("%s: i2c write error!\n", __func__); pr_err 77 drivers/media/pci/cx23885/netup-init.c pr_err("%s: i2c write error!\n", __func__); pr_err 85 drivers/media/pci/cx23885/netup-init.c pr_err("%s: i2c read error!\n", __func__); pr_err 453 drivers/media/pci/cx25821/cx25821-alsa.c pr_err("DEBUG: cx25821 can't find device struct. Can't proceed with open\n"); pr_err 736 drivers/media/pci/cx25821/cx25821-alsa.c pr_err("ERROR %s: can't get IRQ %d for ALSA\n", chip->dev->name, pr_err 792 drivers/media/pci/cx25821/cx25821-alsa.c pr_err("%s failed to find a cx25821 driver.\n", __func__); pr_err 825 drivers/media/pci/cx25821/cx25821-core.c pr_err("%s: can't get MMIO memory @ 0x%llx\n", pr_err 898 drivers/media/pci/cx25821/cx25821-core.c pr_err("%s: No more PCIe resources for subsystem: %04x:%04x\n", pr_err 1306 drivers/media/pci/cx25821/cx25821-core.c pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); pr_err 1315 drivers/media/pci/cx25821/cx25821-core.c pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq); pr_err 156 drivers/media/pci/cx25821/cx25821-i2c.c pr_err(" ERR: %d\n", retval); pr_err 220 drivers/media/pci/cx25821/cx25821-i2c.c pr_err(" ERR: %d\n", retval); pr_err 365 drivers/media/pci/cx25821/cx25821.h pr_err("(%d): " fmt, dev->board, ##args) pr_err 266 drivers/media/pci/cx88/cx88-alsa.c pr_err("IRQ loop detected, disabling interrupts\n"); pr_err 410 drivers/media/pci/cx88/cx88-alsa.c pr_err("BUG: cx88 can't find device struct. Can't proceed with open\n"); pr_err 466 drivers/media/pci/cx88/cx88-blackbird.c pr_err("Hotplug firmware request failed (%s).\n", pr_err 468 drivers/media/pci/cx88/cx88-blackbird.c pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n"); pr_err 473 drivers/media/pci/cx88/cx88-blackbird.c pr_err("Firmware size mismatch (have %zd, expected %d)\n", pr_err 480 drivers/media/pci/cx88/cx88-blackbird.c pr_err("Firmware magic mismatch, wrong file?\n"); pr_err 502 drivers/media/pci/cx88/cx88-blackbird.c pr_err("Firmware load might have failed (checksum mismatch).\n"); pr_err 3224 drivers/media/pci/cx88/cx88-cards.c pr_err("Error - i2c private data undefined.\n"); pr_err 3231 drivers/media/pci/cx88/cx88-cards.c pr_err("Error - device struct undefined.\n"); pr_err 3249 drivers/media/pci/cx88/cx88-cards.c pr_err("Error: Calling callback for tuner %d\n", pr_err 3262 drivers/media/pci/cx88/cx88-cards.c pr_err("Your board has no valid PCI Subsystem ID and thus can't\n"); pr_err 3263 drivers/media/pci/cx88/cx88-cards.c pr_err("be autodetected. Please pass card=<n> insmod option to\n"); pr_err 3264 drivers/media/pci/cx88/cx88-cards.c pr_err("workaround that. Redirect complaints to the vendor of\n"); pr_err 3265 drivers/media/pci/cx88/cx88-cards.c pr_err("the TV card\n"); pr_err 3267 drivers/media/pci/cx88/cx88-cards.c pr_err("Your board isn't known (yet) to the driver. You can\n"); pr_err 3268 drivers/media/pci/cx88/cx88-cards.c pr_err("try to pick one of the existing card configs via\n"); pr_err 3269 drivers/media/pci/cx88/cx88-cards.c pr_err("card=<n> insmod option. Updating to the latest\n"); pr_err 3270 drivers/media/pci/cx88/cx88-cards.c pr_err("version might help as well.\n"); pr_err 3272 drivers/media/pci/cx88/cx88-cards.c pr_err("Here is a list of valid choices for the card=<n> insmod option:\n"); pr_err 3274 drivers/media/pci/cx88/cx88-cards.c pr_err(" card=%d -> %s\n", i, cx88_boards[i].name); pr_err 3644 drivers/media/pci/cx88/cx88-cards.c pr_err("func %d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n", pr_err 756 drivers/media/pci/cx88/cx88-core.c pr_err("pll out of range\n"); pr_err 171 drivers/media/pci/cx88/cx88-dvb.c pr_err("%s() No frontend found\n", __func__); pr_err 619 drivers/media/pci/cx88/cx88-dvb.c pr_err("dvb frontend not attached. Can't attach xc3028\n"); pr_err 632 drivers/media/pci/cx88/cx88-dvb.c pr_err("xc3028 attach failed\n"); pr_err 655 drivers/media/pci/cx88/cx88-dvb.c pr_err("dvb frontend not attached. Can't attach xc4000\n"); pr_err 662 drivers/media/pci/cx88/cx88-dvb.c pr_err("xc4000 attach failed\n"); pr_err 795 drivers/media/pci/cx88/cx88-dvb.c pr_err("%s() failed to alloc\n", __func__); pr_err 995 drivers/media/pci/cx88/cx88-dvb.c pr_err("no i2c-bus available, cannot attach dvb drivers\n"); pr_err 1173 drivers/media/pci/cx88/cx88-dvb.c pr_err("built without vp3054 support\n"); pr_err 1610 drivers/media/pci/cx88/cx88-dvb.c pr_err("The frontend of your DVB/ATSC card isn't supported yet\n"); pr_err 1615 drivers/media/pci/cx88/cx88-dvb.c pr_err("frontend initialization failed\n"); pr_err 1768 drivers/media/pci/cx88/cx88-dvb.c pr_err("%s() failed to get frontend(%d)\n", pr_err 1797 drivers/media/pci/cx88/cx88-dvb.c pr_err("dvb_register failed (err = %d)\n", err); pr_err 170 drivers/media/pci/cx88/cx88-i2c.c pr_err("i2c register FAILED\n"); pr_err 156 drivers/media/pci/cx88/cx88-mpeg.c pr_err("%s() Failed. Unsupported value in .mpeg (0x%08x)\n", pr_err 391 drivers/media/pci/cx88/cx88-mpeg.c pr_err("Oops: no 32bit PCI DMA ???\n"); pr_err 412 drivers/media/pci/cx88/cx88-mpeg.c pr_err("can't get IRQ %d\n", dev->pci->irq); pr_err 469 drivers/media/pci/cx88/cx88-mpeg.c pr_err("can't enable device\n"); pr_err 476 drivers/media/pci/cx88/cx88-mpeg.c pr_err("can't enable device\n"); pr_err 607 drivers/media/pci/cx88/cx88-mpeg.c pr_err("cx8802_driver is invalid\n"); pr_err 640 drivers/media/pci/cx88/cx88-mpeg.c pr_err("cx8802 probe failed, err = %d\n", err); pr_err 683 drivers/media/pci/cx88/cx88-mpeg.c pr_err("cx8802 driver remove failed (%d)\n", pr_err 769 drivers/media/pci/cx88/cx88-mpeg.c pr_err("cx8802 driver remove failed (%d)\n", pr_err 1295 drivers/media/pci/cx88/cx88-video.c pr_err("Oops: no 32bit PCI DMA ???\n"); pr_err 1312 drivers/media/pci/cx88/cx88-video.c pr_err("can't get IRQ %d\n", pci_dev->irq); pr_err 1457 drivers/media/pci/cx88/cx88-video.c pr_err("can't register video device\n"); pr_err 1474 drivers/media/pci/cx88/cx88-video.c pr_err("can't register vbi device\n"); pr_err 1489 drivers/media/pci/cx88/cx88-video.c pr_err("can't register radio device\n"); pr_err 1502 drivers/media/pci/cx88/cx88-video.c pr_err("failed to create cx88 audio thread, err=%d\n", pr_err 1597 drivers/media/pci/cx88/cx88-video.c pr_err("can't enable device\n"); pr_err 1605 drivers/media/pci/cx88/cx88-video.c pr_err("can't set power state\n"); pr_err 120 drivers/media/pci/cx88/cx88-vp3054-i2c.c pr_err("vp3054_i2c register FAILED\n"); pr_err 194 drivers/media/pci/ivtv/ivtv-alsa-main.c pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n", pr_err 201 drivers/media/pci/ivtv/ivtv-alsa-main.c pr_err("ivtv-alsa itv is NULL\n"); pr_err 249 drivers/media/pci/ivtv/ivtv-alsa-main.c pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n", pr_err 55 drivers/media/pci/ivtv/ivtv-alsa.h pr_err("%s-alsa: " fmt, v4l2_dev->name , ## args) pr_err 1474 drivers/media/pci/ivtv/ivtv-driver.c pr_err("Exiting, ivtv_first_minor must be between 0 and %d\n", pr_err 1485 drivers/media/pci/ivtv/ivtv-driver.c pr_err("Error detecting PCI card\n"); pr_err 1277 drivers/media/pci/ivtv/ivtvfb.c pr_err("ivtvfb_card_id parameter is out of range (valid range: -1 - %d)\n", pr_err 1286 drivers/media/pci/ivtv/ivtvfb.c pr_err("no cards found\n"); pr_err 802 drivers/media/pci/saa7134/saa7134-alsa.c pr_err("BUG: saa7134 can't find device struct. Can't proceed with open\n"); pr_err 1155 drivers/media/pci/saa7134/saa7134-alsa.c pr_err("%s: can't get IRQ %d for ALSA\n", pr_err 7315 drivers/media/pci/saa7134/saa7134-cards.c pr_err("saa7134: Error - device struct undefined.\n"); pr_err 7749 drivers/media/pci/saa7134/saa7134-cards.c pr_err("EEPROM read failure\n"); pr_err 7764 drivers/media/pci/saa7134/saa7134-cards.c pr_err("%s Can't determine tuner type %x from EEPROM\n", pr_err 7786 drivers/media/pci/saa7134/saa7134-cards.c pr_err("%s Can't determine tuner type %x from EEPROM\n", pr_err 7790 drivers/media/pci/saa7134/saa7134-cards.c pr_err("%s unexpected config structure\n", dev->name); pr_err 848 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to initialize demod pad!\n"); pr_err 852 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to register demod entity!\n"); pr_err 864 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to initialize video media entity!\n"); pr_err 870 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to initialize vbi media entity!\n"); pr_err 916 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to initialize input pad[%d]!\n", i); pr_err 920 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to register input entity %d!\n", i); pr_err 935 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to initialize input pad[%d]!\n", i); pr_err 939 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to register input entity %d!\n", i); pr_err 1132 drivers/media/pci/saa7134/saa7134-core.c pr_err("%s: can't get MMIO memory @ 0x%llx\n", pr_err 1141 drivers/media/pci/saa7134/saa7134-core.c pr_err("%s: can't ioremap() MMIO memory\n", pr_err 1154 drivers/media/pci/saa7134/saa7134-core.c pr_err("%s: can't get IRQ %d\n", pr_err 1263 drivers/media/pci/saa7134/saa7134-core.c pr_err("failed to create media graph\n"); pr_err 1211 drivers/media/pci/saa7134/saa7134-dvb.c pr_err("%s() failed to alloc\n", __func__); pr_err 1874 drivers/media/pci/saa7134/saa7134-dvb.c pr_err("%s/2: xc3028 attach failed\n", pr_err 1881 drivers/media/pci/saa7134/saa7134-dvb.c pr_err("%s/dvb: frontend initialization failed\n", dev->name); pr_err 174 drivers/media/pci/saa7134/saa7134-go7007.c pr_err("saa7134-go7007: unable to reset the GO7007\n"); pr_err 198 drivers/media/pci/saa7134/saa7134-go7007.c pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n", pr_err 365 drivers/media/pci/saa7134/saa7134-go7007.c pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n", pr_err 372 drivers/media/pci/saa7134/saa7134-i2c.c pr_err("%s: EEPROM i2c gate close failure\n", pr_err 767 drivers/media/pci/saa7134/saa7134-input.c pr_err("Oops: IR config error [card=%d]\n", dev->board); pr_err 667 drivers/media/pci/saa7134/saa7134-tvaudio.c pr_err("dsp access wait timeout [bit=%s]\n", pr_err 115 drivers/media/pci/saa7134/saa7134-vbi.c pr_err("The buffer is not page-aligned\n"); pr_err 807 drivers/media/pci/saa7134/saa7134-video.c pr_err("Couldn't change link %s->%s to %s. Error %d\n", pr_err 923 drivers/media/pci/saa7134/saa7134-video.c pr_err("The buffer is not page-aligned\n"); pr_err 1275 drivers/media/pci/saa7134/saa7134-video.c pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); pr_err 1354 drivers/media/pci/saa7134/saa7134-video.c pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); pr_err 1388 drivers/media/pci/saa7134/saa7134-video.c pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); pr_err 1778 drivers/media/pci/saa7134/saa7134-video.c pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); pr_err 162 drivers/media/pci/saa7146/hexium_gemini.c pr_err("hexium_init_done() failed for address 0x%02x\n", pr_err 194 drivers/media/pci/saa7146/hexium_gemini.c pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n", pr_err 294 drivers/media/pci/saa7146/hexium_gemini.c pr_err("cannot register capture v4l2 device. skipping.\n"); pr_err 288 drivers/media/pci/saa7146/hexium_orion.c pr_err("failed for address 0x%02x\n", i); pr_err 366 drivers/media/pci/saa7146/hexium_orion.c pr_err("cannot register capture v4l2 device. skipping.\n"); pr_err 370 drivers/media/pci/saa7146/hexium_orion.c pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num); pr_err 260 drivers/media/pci/saa7146/mxb.c pr_err("did not find all i2c devices. aborting\n"); pr_err 518 drivers/media/pci/saa7146/mxb.c pr_err("VIDIOC_S_INPUT: could not address saa7111a\n"); pr_err 353 drivers/media/pci/ttpci/budget-av.c pr_err("ci initialisation failed\n"); pr_err 1334 drivers/media/pci/ttpci/budget-av.c pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", pr_err 1346 drivers/media/pci/ttpci/budget-av.c pr_err("Frontend registration failed!\n"); pr_err 1492 drivers/media/pci/ttpci/budget-av.c pr_err("KNC1-%d: Could not read MAC from KNC1 card\n", pr_err 281 drivers/media/pci/tw68/tw68-core.c pr_err("%s: can't get MMIO memory @ 0x%llx\n", pr_err 291 drivers/media/pci/tw68/tw68-core.c pr_err("%s: can't ioremap() MMIO memory\n", pr_err 303 drivers/media/pci/tw68/tw68-core.c pr_err("%s: can't get IRQ %d\n", pr_err 317 drivers/media/pci/tw68/tw68-core.c pr_err("%s: can't register video device\n", pr_err 223 drivers/media/platform/am437x/am437x-vpfe.c pr_err("Invalid mbus code set\n"); pr_err 846 drivers/media/platform/coda/coda-bit.c pr_err("IRAM is smaller than the search ram size\n"); pr_err 2287 drivers/media/platform/coda/coda-bit.c pr_err("DEC_PIC_SUCCESS = %d\n", val); pr_err 249 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Exceeded maximum downscaling ratio (1/16))"); pr_err 334 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Plane address is wrong"); pr_err 404 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("pixelformat format (0x%X) invalid\n", pr_err 527 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("doesn't support negative values for top & left\n"); pr_err 648 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("out of scaler range"); pr_err 669 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Horizontal scale ratio is out of range"); pr_err 676 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Vertical scale ratio is out of range"); pr_err 764 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Control handler of this context was created already"); pr_err 784 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Failed to create G-Scaler control handlers"); pr_err 838 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Invalid the number of color planes"); pr_err 871 drivers/media/platform/exynos-gsc/gsc-core.c pr_err("Local path input over-run interrupt has occurred!\n"); pr_err 482 drivers/media/platform/exynos-gsc/gsc-core.h pr_err("Wrong buffer/video queue type (%d)", type); pr_err 180 drivers/media/platform/exynos-gsc/gsc-m2m.c pr_err("Wrong address"); pr_err 195 drivers/media/platform/exynos-gsc/gsc-m2m.c pr_err("Scaler setup error"); pr_err 338 drivers/media/platform/exynos-gsc/gsc-m2m.c pr_err("queue (%d) busy", f->type); pr_err 546 drivers/media/platform/exynos-gsc/gsc-m2m.c pr_err("Out of scaler range"); pr_err 652 drivers/media/platform/exynos-gsc/gsc-m2m.c pr_err("Failed to initialize m2m context"); pr_err 569 drivers/media/platform/exynos4-is/fimc-is.c pr_err("ISR_NDONE: %d: %#x, %s\n", is->i2h_cmd.args[0], pr_err 574 drivers/media/platform/exynos4-is/fimc-is.c pr_err("IS_ERROR_TIME_OUT\n"); pr_err 591 drivers/media/platform/exynos4-is/fimc-is.c pr_err("IS control sequence error: Not Ready\n"); pr_err 941 drivers/media/platform/imx-pxp.c pr_err("Instance released before the end of transaction\n"); pr_err 29 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c pr_err("mtk-jpeg: write reg %x without %d align\n", reg, align); pr_err 236 drivers/media/platform/mtk-mdp/mtk_mdp_core.h pr_err("[MTK_MDP][ERROR] %s:%d: " fmt "\n", __func__, __LINE__, \ pr_err 33 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h pr_err("[MTK_V4L2][ERROR] %s:%d: " fmt "\n", __func__, __LINE__, \ pr_err 37 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h pr_err("[MTK_VCODEC][ERROR][%d]: %s() " fmt "\n", \ pr_err 343 drivers/media/platform/mx2_emmaprp.c pr_err("Instance released before the end of transaction\n"); pr_err 350 drivers/media/platform/mx2_emmaprp.c pr_err("PrP bus error occurred, this transfer is probably corrupted\n"); pr_err 272 drivers/media/platform/omap/omap_vout_vrfb.c pr_err("%s: DMA interleaved prep error\n", __func__); pr_err 281 drivers/media/platform/omap/omap_vout_vrfb.c pr_err("%s: dmaengine_submit failed (%d)\n", __func__, cookie); pr_err 295 drivers/media/platform/omap/omap_vout_vrfb.c pr_err("%s: Timeout while waiting for DMA\n", __func__); pr_err 299 drivers/media/platform/omap/omap_vout_vrfb.c pr_err("%s: DMA completion %s status\n", __func__, pr_err 2498 drivers/media/platform/s5p-jpeg/jpeg-core.c pr_err("%s data will not fit into plane (%lu < %lu)\n", pr_err 38 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c pr_err("MFCWRITE(%p): %08x\n", r, (unsigned int)v); \ pr_err 1160 drivers/media/platform/ti-vpe/vpdma.c pr_err("failed to load firmware %s\n", VPDMA_FIRMWARE); pr_err 303 drivers/media/platform/vicodec/codec-v4l2-fwht.c pr_err("version %d is not supported, current version is %d\n", pr_err 2031 drivers/media/platform/vicodec/vicodec-core.c pr_err("No buffer was provided with the request\n"); pr_err 630 drivers/media/platform/vim2m.c pr_err("Instance released before the end of transaction\n"); pr_err 100 drivers/media/platform/vimc/vimc-streamer.c pr_err("subdev_call error %s\n", pr_err 1545 drivers/media/platform/vivid/vivid-core.c pr_err("vivid: could not find font\n"); pr_err 1564 drivers/media/platform/vivid/vivid-core.c pr_err("vivid: error %d while loading driver\n", ret); pr_err 329 drivers/media/platform/vivid/vivid-osd.c pr_err("abort, unable to alloc cmap\n"); pr_err 293 drivers/media/radio/radio-cadet.c pr_err("cadet: RDS fifo overflow\n"); pr_err 2022 drivers/media/radio/radio-wl1273.c pr_err("Cannot allocate memory for RDS buffer.\n"); pr_err 480 drivers/media/rc/imon.c pr_err("could not find interface for minor %d\n", subminor); pr_err 487 drivers/media/rc/imon.c pr_err("no context found for minor %d\n", subminor); pr_err 495 drivers/media/rc/imon.c pr_err("display not supported by device\n"); pr_err 498 drivers/media/rc/imon.c pr_err("display port is already open\n"); pr_err 525 drivers/media/rc/imon.c pr_err("no context for device\n"); pr_err 532 drivers/media/rc/imon.c pr_err("display not supported by device\n"); pr_err 535 drivers/media/rc/imon.c pr_err("display is not open\n"); pr_err 650 drivers/media/rc/imon.c pr_err("no context for device\n"); pr_err 655 drivers/media/rc/imon.c pr_err("no iMON device present\n"); pr_err 683 drivers/media/rc/imon.c pr_err("no context for device\n"); pr_err 744 drivers/media/rc/imon.c pr_err("send_packet failed for packet %d\n", i); pr_err 2157 drivers/media/rc/imon.c pr_err("no valid input (IR) endpoint found\n"); pr_err 2226 drivers/media/rc/imon.c pr_err("usb_submit_urb failed for intf0 (%d)\n", ret); pr_err 2308 drivers/media/rc/imon.c pr_err("usb_submit_urb failed for intf1 (%d)\n", ret); pr_err 2393 drivers/media/rc/imon.c pr_err("failed to initialize context!\n"); pr_err 2409 drivers/media/rc/imon.c pr_err("failed to attach to context!\n"); pr_err 2425 drivers/media/rc/imon.c pr_err("Could not create RF sysfs entries(%d)\n", pr_err 817 drivers/media/rc/lirc_dev.c pr_err("class_create failed\n"); pr_err 825 drivers/media/rc/lirc_dev.c pr_err("alloc_chrdev_region failed\n"); pr_err 116 drivers/media/rc/rc-main.c pr_err("Couldn't load IR keymap %s\n", name); pr_err 125 drivers/media/rc/rc-main.c pr_err("IR keymap %s not found\n", name); pr_err 1199 drivers/media/rc/rc-main.c pr_err("Can't enable IR protocol %s\n", pr_err 1207 drivers/media/rc/rc-main.c pr_err("Couldn't load IR protocol module %s\n", pr_err 1217 drivers/media/rc/rc-main.c pr_err("Loaded IR protocol module %s, but protocol %s still not available\n", pr_err 2011 drivers/media/rc/rc-main.c pr_err("rc_core: unable to register rc class\n"); pr_err 2017 drivers/media/rc/rc-main.c pr_err("rc_core: unable to init lirc\n"); pr_err 417 drivers/media/rc/serial_ir.c pr_err("port existence test failed, cannot continue\n"); pr_err 288 drivers/media/rc/sir_ir.c pr_err("port existence test failed, cannot continue\n"); pr_err 351 drivers/media/rc/sir_ir.c pr_err("i/o port 0x%.4x already in use.\n", io); pr_err 357 drivers/media/rc/sir_ir.c pr_err("IRQ %d already in use.\n", irq); pr_err 1207 drivers/media/rc/winbond-cir.c pr_err("Unable to register driver\n"); pr_err 202 drivers/media/rc/xbox_remote.c pr_err("%s: Unexpected desc.bNumEndpoints: %d\n", pr_err 210 drivers/media/rc/xbox_remote.c pr_err("%s: Unexpected endpoint_in\n", __func__); pr_err 214 drivers/media/rc/xbox_remote.c pr_err("%s: endpoint_in message size==0?\n", __func__); pr_err 68 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 89 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 93 drivers/media/spi/cxd2880-spi.c pr_err("data size > WRITE_MAX\n"); pr_err 98 drivers/media/spi/cxd2880-spi.c pr_err("out of range\n"); pr_err 112 drivers/media/spi/cxd2880-spi.c pr_err("write spi failed %d\n", ret); pr_err 127 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 131 drivers/media/spi/cxd2880-spi.c pr_err("packet num > 0xffff\n"); pr_err 150 drivers/media/spi/cxd2880-spi.c pr_err("spi_write_then_read failed\n"); pr_err 163 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 170 drivers/media/spi/cxd2880-spi.c pr_err("spi_write_then_read failed\n"); pr_err 190 drivers/media/spi/cxd2880-spi.c pr_err("write spi failed\n"); pr_err 204 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 241 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg.\n"); pr_err 261 drivers/media/spi/cxd2880-spi.c pr_err("set_pid_filter failed\n"); pr_err 276 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 282 drivers/media/spi/cxd2880-spi.c pr_err("set_clear_ts_buffer failed\n"); pr_err 291 drivers/media/spi/cxd2880-spi.c pr_err("spi_read_ts_buffer_info error\n"); pr_err 330 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 336 drivers/media/spi/cxd2880-spi.c pr_err("feed->demux is NULL\n"); pr_err 342 drivers/media/spi/cxd2880-spi.c pr_err("Exceeded maximum PID count (32)."); pr_err 343 drivers/media/spi/cxd2880-spi.c pr_err("Selected PID cannot be enabled.\n"); pr_err 353 drivers/media/spi/cxd2880-spi.c pr_err("update pid filter failed\n"); pr_err 376 drivers/media/spi/cxd2880-spi.c pr_err("PID filter is full.\n"); pr_err 394 drivers/media/spi/cxd2880-spi.c pr_err("ts buffer allocate failed\n"); pr_err 404 drivers/media/spi/cxd2880-spi.c pr_err("kthread_run failed/\n"); pr_err 428 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 434 drivers/media/spi/cxd2880-spi.c pr_err("feed->demux is NULL\n"); pr_err 440 drivers/media/spi/cxd2880-spi.c pr_err("no feed is started\n"); pr_err 451 drivers/media/spi/cxd2880-spi.c pr_err("PID %d not found.\n", feed->pid); pr_err 473 drivers/media/spi/cxd2880-spi.c pr_err("PID %d not found\n", feed->pid); pr_err 488 drivers/media/spi/cxd2880-spi.c pr_err("'kthread_stop failed. (%d)\n", ret_stop); pr_err 515 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg.\n"); pr_err 548 drivers/media/spi/cxd2880-spi.c pr_err("dvb_register_adapter() failed\n"); pr_err 553 drivers/media/spi/cxd2880-spi.c pr_err("cxd2880_attach failed\n"); pr_err 561 drivers/media/spi/cxd2880-spi.c pr_err("dvb_register_frontend() failed\n"); pr_err 574 drivers/media/spi/cxd2880-spi.c pr_err("dvb_dmx_init() failed\n"); pr_err 584 drivers/media/spi/cxd2880-spi.c pr_err("dvb_dmxdev_init() failed\n"); pr_err 592 drivers/media/spi/cxd2880-spi.c pr_err("add_frontend() failed\n"); pr_err 599 drivers/media/spi/cxd2880-spi.c pr_err("dvb_register_frontend() failed\n"); pr_err 631 drivers/media/spi/cxd2880-spi.c pr_err("invalid arg\n"); pr_err 638 drivers/media/spi/cxd2880-spi.c pr_err("failed\n"); pr_err 1117 drivers/media/tuners/xc5000.c pr_err("xc5000: Upload failed. rc %d\n", ret); pr_err 1123 drivers/media/tuners/xc5000.c pr_err("xc5000: Firmware file with incorrect size\n"); pr_err 48 drivers/media/usb/as102/as102_fw.c pr_err("invalid firmware file\n"); pr_err 182 drivers/media/usb/as102/as102_fw.c pr_err("%s: unable to locate firmware file: %s\n", pr_err 190 drivers/media/usb/as102/as102_fw.c pr_err("%s: error during firmware upload part1\n", pr_err 206 drivers/media/usb/as102/as102_fw.c pr_err("%s: unable to locate firmware file: %s\n", pr_err 214 drivers/media/usb/as102/as102_fw.c pr_err("%s: error during firmware upload part2\n", pr_err 346 drivers/media/usb/as102/as102_usb_drv.c pr_err("Device names table invalid size"); pr_err 428 drivers/media/usb/as102/as102_usb_drv.c pr_err("%s: can't find device for minor %d\n", pr_err 133 drivers/media/usb/au0828/au0828-cards.c pr_err("%s(): Unknown command.\n", __func__); pr_err 216 drivers/media/usb/au0828/au0828-cards.c pr_err("analog subdev registration failed\n"); pr_err 225 drivers/media/usb/au0828/au0828-cards.c pr_err("tuner subdev registration fail\n"); pr_err 83 drivers/media/usb/au0828/au0828-core.c pr_err("%s() Failed sending control message, error %d.\n", pr_err 108 drivers/media/usb/au0828/au0828-core.c pr_err("%s() Failed receiving control message, error %d.\n", pr_err 408 drivers/media/usb/au0828/au0828-core.c pr_err("Activate link from %s->%s. Error %d\n", pr_err 415 drivers/media/usb/au0828/au0828-core.c pr_err("Start Pipeline: %s->%s Error %d\n", pr_err 419 drivers/media/usb/au0828/au0828-core.c pr_err("Deactivate link Error %d\n", ret); pr_err 512 drivers/media/usb/au0828/au0828-core.c pr_err("Start Pipeline: %s->%s %d\n", pr_err 542 drivers/media/usb/au0828/au0828-core.c pr_err("Deactivate link Error %d\n", ret); pr_err 673 drivers/media/usb/au0828/au0828-core.c pr_err("au0828: Device initialization failed.\n"); pr_err 674 drivers/media/usb/au0828/au0828-core.c pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n"); pr_err 680 drivers/media/usb/au0828/au0828-core.c pr_err("%s() Unable to allocate memory\n", __func__); pr_err 695 drivers/media/usb/au0828/au0828-core.c pr_err("%s() au0828_media_device_init failed\n", pr_err 731 drivers/media/usb/au0828/au0828-core.c pr_err("%s() au0828_analog_register failed to register on V4L2\n", pr_err 740 drivers/media/usb/au0828/au0828-core.c pr_err("%s() au0828_dvb_register failed\n", pr_err 837 drivers/media/usb/au0828/au0828-core.c pr_err("usb_register failed, error = %d\n", ret); pr_err 127 drivers/media/usb/au0828/au0828-dvb.c pr_err("%s: Unsupported URB type %d\n", pr_err 218 drivers/media/usb/au0828/au0828-dvb.c pr_err("%s: failed big buffer allocation, err = %d\n", pr_err 239 drivers/media/usb/au0828/au0828-dvb.c pr_err("%s: failed urb submission, err = %d\n", pr_err 410 drivers/media/usb/au0828/au0828-dvb.c pr_err("failed buffer allocation (errno = %d)\n", pr_err 424 drivers/media/usb/au0828/au0828-dvb.c pr_err("dvb_register_adapter failed (errno = %d)\n", pr_err 438 drivers/media/usb/au0828/au0828-dvb.c pr_err("dvb_register_frontend failed (errno = %d)\n", pr_err 458 drivers/media/usb/au0828/au0828-dvb.c pr_err("dvb_dmx_init failed (errno = %d)\n", result); pr_err 467 drivers/media/usb/au0828/au0828-dvb.c pr_err("dvb_dmxdev_init failed (errno = %d)\n", result); pr_err 474 drivers/media/usb/au0828/au0828-dvb.c pr_err("add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", pr_err 482 drivers/media/usb/au0828/au0828-dvb.c pr_err("add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", pr_err 489 drivers/media/usb/au0828/au0828-dvb.c pr_err("connect_frontend failed (errno = %d)\n", result); pr_err 625 drivers/media/usb/au0828/au0828-dvb.c pr_err("%s() Frontend initialization failed\n", pr_err 42 drivers/media/usb/au0828/au0828-vbi.c pr_err("%s data will not fit into plane (%lu < %lu)\n", pr_err 664 drivers/media/usb/au0828/au0828-video.c pr_err("%s() v4l2_device_register failed\n", pr_err 674 drivers/media/usb/au0828/au0828-video.c pr_err("%s() v4l2_ctrl_handler_init failed\n", pr_err 708 drivers/media/usb/au0828/au0828-video.c pr_err("%s data will not fit into plane (%lu < %lu)\n", pr_err 1856 drivers/media/usb/au0828/au0828-video.c pr_err("failed to initialize video media entity!\n"); pr_err 1861 drivers/media/usb/au0828/au0828-video.c pr_err("failed to initialize vbi media entity!\n"); pr_err 1891 drivers/media/usb/au0828/au0828-video.c pr_err("failed to initialize input pad[%d]!\n", i); pr_err 1895 drivers/media/usb/au0828/au0828-video.c pr_err("failed to register input entity %d!\n", i); pr_err 2031 drivers/media/usb/au0828/au0828-video.c pr_err("%s() au0282_dev_register failed to create graph\n", pr_err 1132 drivers/media/usb/cx231xx/cx231xx-video.c pr_err("failed to initialize input pad[%d]!\n", i); pr_err 1136 drivers/media/usb/cx231xx/cx231xx-video.c pr_err("failed to register input entity %d!\n", i); pr_err 154 drivers/media/usb/dvb-usb-v2/az6007.c pr_err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", pr_err 165 drivers/media/usb/dvb-usb-v2/az6007.c pr_err("usb write operation failed. (%d)\n", ret); pr_err 601 drivers/media/usb/dvb-usb-v2/az6007.c pr_err("Cannot initialize CI: Error %d.\n", ret); pr_err 101 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c pr_err("%s: invalid bandwidth setting!", __func__); pr_err 292 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c pr_err("%s: bandwidth not set!", __func__); pr_err 297 drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c pr_err("%s: modulation type not supported!", __func__); pr_err 106 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x", pr_err 125 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("error writing reg: 0x%02x, val: 0x%02x", addr, data); pr_err 142 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...", pr_err 175 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("failed on reg #%d (0x%02x)", i, pr_err 247 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("failed to get chip info during probe"); \ pr_err 285 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("set interface failed"); pr_err 440 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("set interface failed"); pr_err 511 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("set interface failed"); pr_err 596 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("set interface failed"); pr_err 683 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("set interface failed"); pr_err 758 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("set interface failed"); pr_err 810 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \ pr_err 938 drivers/media/usb/dvb-usb-v2/mxl111sf.c pr_err("failed to get chip info during probe"); pr_err 257 drivers/media/usb/em28xx/em28xx-audio.c pr_err("em28xx-audio: BUG: em28xx can't find device struct. Can't proceed with open\n"); pr_err 50 drivers/media/usb/gspca/benq.c pr_err("reg_w err %d\n", ret); pr_err 94 drivers/media/usb/gspca/benq.c pr_err("usb_alloc_coherent failed\n"); pr_err 156 drivers/media/usb/gspca/benq.c pr_err("urb status: %d\n", urb->status); pr_err 184 drivers/media/usb/gspca/benq.c pr_err("ISOC data error: [%d] status=%d\n", pr_err 231 drivers/media/usb/gspca/benq.c pr_err("usb_submit_urb(0) ret %d\n", st); pr_err 234 drivers/media/usb/gspca/benq.c pr_err("usb_submit_urb() ret %d\n", st); pr_err 909 drivers/media/usb/gspca/conex.c pr_err("Could not initialize controls\n"); pr_err 426 drivers/media/usb/gspca/cpia1.c pr_err("usb_control_msg %02x, error %d\n", command[1], ret); pr_err 1154 drivers/media/usb/gspca/cpia1.c pr_err("ReadVPRegs(30,4,9,8) - failed: %d\n", ret); pr_err 1851 drivers/media/usb/gspca/cpia1.c pr_err("Could not initialize controls\n"); pr_err 44 drivers/media/usb/gspca/dtcs033.c pr_err("usb_control_msg error %d\n", ret); pr_err 191 drivers/media/usb/gspca/etoms.c pr_err("reg_w: buffer overflow\n"); pr_err 735 drivers/media/usb/gspca/etoms.c pr_err("Could not initialize controls\n"); pr_err 189 drivers/media/usb/gspca/finepix.c pr_err("init failed %d\n", ret); pr_err 201 drivers/media/usb/gspca/finepix.c pr_err("usb_bulk_msg failed %d\n", ret); pr_err 208 drivers/media/usb/gspca/finepix.c pr_err("frame request failed %d\n", ret); pr_err 164 drivers/media/usb/gspca/gl860/gl860.c pr_err("Could not initialize controls\n"); pr_err 570 drivers/media/usb/gspca/gl860/gl860.c pr_err("ctrl transfer failed %4d [p%02x r%d v%04x i%04x len%d]\n", pr_err 113 drivers/media/usb/gspca/gspca.c pr_err("Resubmit URB failed with error %i\n", ret); pr_err 142 drivers/media/usb/gspca/gspca.c pr_err("Input device registration failed with error %i\n", pr_err 313 drivers/media/usb/gspca/gspca.c pr_err("usb_submit_urb() ret %d\n", st); pr_err 369 drivers/media/usb/gspca/gspca.c pr_err("usb_submit_urb() ret %d\n", st); pr_err 500 drivers/media/usb/gspca/gspca.c pr_err("set alt 0 err %d\n", ret); pr_err 600 drivers/media/usb/gspca/gspca.c pr_err("alt %d iso endp with 0 interval\n", j); pr_err 706 drivers/media/usb/gspca/gspca.c pr_err("usb_alloc_coherent failed\n"); pr_err 786 drivers/media/usb/gspca/gspca.c pr_err("bad altsetting %d\n", gspca_dev->alt); pr_err 796 drivers/media/usb/gspca/gspca.c pr_err("no transfer endpoint found\n"); pr_err 817 drivers/media/usb/gspca/gspca.c pr_err("set alt %d err %d\n", alt, ret); pr_err 868 drivers/media/usb/gspca/gspca.c pr_err("usb_submit_urb alt %d err %d\n", pr_err 885 drivers/media/usb/gspca/gspca.c pr_err("no transfer endpoint found\n"); pr_err 1461 drivers/media/usb/gspca/gspca.c pr_err("couldn't kzalloc gspca struct\n"); pr_err 1466 drivers/media/usb/gspca/gspca.c pr_err("out of memory\n"); pr_err 1561 drivers/media/usb/gspca/gspca.c pr_err("video_register_device err %d\n", ret); pr_err 1595 drivers/media/usb/gspca/gspca.c pr_err("%04x:%04x too many config\n", pr_err 97 drivers/media/usb/gspca/jeilinj.c pr_err("command write [%02x] error %d\n", pr_err 115 drivers/media/usb/gspca/jeilinj.c pr_err("read command [%02x] error %d\n", pr_err 459 drivers/media/usb/gspca/jeilinj.c pr_err("Could not initialize controls\n"); pr_err 83 drivers/media/usb/gspca/jl2005bcd.c pr_err("command write [%02x] error %d\n", pr_err 97 drivers/media/usb/gspca/jl2005bcd.c pr_err("read command [0x%02x] error %d\n", pr_err 317 drivers/media/usb/gspca/jl2005bcd.c pr_err("Couldn't allocate USB buffer\n"); pr_err 344 drivers/media/usb/gspca/jl2005bcd.c pr_err("First block is not the first block\n"); pr_err 462 drivers/media/usb/gspca/jl2005bcd.c pr_err("Unknown resolution specified\n"); pr_err 132 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Invalid command length (0x%x)\n", cmd_len); pr_err 149 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Output control transfer failed (%d)\n", res); pr_err 158 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Input control transfer failed (%d)\n", pr_err 165 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Bad magic %02x %02x\n", pr_err 170 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Bad cmd %02x != %02x\n", pr_err 175 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Bad tag %04x != %04x\n", pr_err 180 drivers/media/usb/gspca/kinect.c pr_err("send_cmd: Bad len %04x != %04x\n", pr_err 93 drivers/media/usb/gspca/konica.c pr_err("reg_w err writing %02x to %02x: %d\n", pr_err 115 drivers/media/usb/gspca/konica.c pr_err("reg_r err %d\n", ret); pr_err 179 drivers/media/usb/gspca/konica.c pr_err("Couldn't get altsetting\n"); pr_err 214 drivers/media/usb/gspca/konica.c pr_err("usb_buffer_alloc failed\n"); pr_err 276 drivers/media/usb/gspca/konica.c pr_err("resubmit urb error %d\n", st); pr_err 432 drivers/media/usb/gspca/konica.c pr_err("Could not initialize controls\n"); pr_err 300 drivers/media/usb/gspca/m5602/m5602_mt9m111.c pr_err("Could not initialize controls\n"); pr_err 296 drivers/media/usb/gspca/m5602/m5602_ov7660.c pr_err("Could not initialize controls\n"); pr_err 398 drivers/media/usb/gspca/m5602/m5602_ov9650.c pr_err("Could not initialize controls\n"); pr_err 269 drivers/media/usb/gspca/m5602/m5602_po1030.c pr_err("Could not initialize controls\n"); pr_err 444 drivers/media/usb/gspca/m5602/m5602_s5k4aa.c pr_err("Invalid stream command, exiting init\n"); pr_err 477 drivers/media/usb/gspca/m5602/m5602_s5k4aa.c pr_err("Invalid stream command, exiting init\n"); pr_err 552 drivers/media/usb/gspca/m5602/m5602_s5k4aa.c pr_err("Could not initialize controls\n"); pr_err 284 drivers/media/usb/gspca/m5602/m5602_s5k83a.c pr_err("Could not initialize controls\n"); pr_err 83 drivers/media/usb/gspca/mars.c pr_err("reg write [%02x] error %d\n", pr_err 212 drivers/media/usb/gspca/mars.c pr_err("Could not initialize controls\n"); pr_err 131 drivers/media/usb/gspca/mr97310a.c pr_err("reg write [%02x] error %d\n", pr_err 145 drivers/media/usb/gspca/mr97310a.c pr_err("reg read [%02x] error %d\n", pr_err 404 drivers/media/usb/gspca/mr97310a.c pr_err("Unknown CIF Sensor id : %02x\n", pr_err 439 drivers/media/usb/gspca/mr97310a.c pr_err("Unknown VGA Sensor id Byte 0: %02x\n", pr_err 441 drivers/media/usb/gspca/mr97310a.c pr_err("Defaults assumed, may not work\n"); pr_err 442 drivers/media/usb/gspca/mr97310a.c pr_err("Please report this\n"); pr_err 459 drivers/media/usb/gspca/mr97310a.c pr_err("Unknown VGA Sensor id Byte 1: %02x\n", pr_err 461 drivers/media/usb/gspca/mr97310a.c pr_err("Defaults assumed, may not work\n"); pr_err 462 drivers/media/usb/gspca/mr97310a.c pr_err("Please report this\n"); pr_err 998 drivers/media/usb/gspca/mr97310a.c pr_err("Could not initialize controls\n"); pr_err 1552 drivers/media/usb/gspca/nw80x.c pr_err("reg_w err %d\n", ret); pr_err 1573 drivers/media/usb/gspca/nw80x.c pr_err("reg_r err %d\n", ret); pr_err 1780 drivers/media/usb/gspca/nw80x.c pr_err("Bad webcam type %d for NW80%d\n", pr_err 2034 drivers/media/usb/gspca/nw80x.c pr_err("Could not initialize controls\n"); pr_err 674 drivers/media/usb/gspca/ov534.c pr_err("write failed %d\n", ret); pr_err 694 drivers/media/usb/gspca/ov534.c pr_err("read failed %d\n", ret); pr_err 764 drivers/media/usb/gspca/ov534.c pr_err("sccb_reg_write failed\n"); pr_err 774 drivers/media/usb/gspca/ov534.c pr_err("sccb_reg_read failed 1\n"); pr_err 778 drivers/media/usb/gspca/ov534.c pr_err("sccb_reg_read failed 2\n"); pr_err 1299 drivers/media/usb/gspca/ov534.c pr_err("Could not initialize controls\n"); pr_err 1120 drivers/media/usb/gspca/ov534_9.c pr_err("reg_w failed %d\n", ret); pr_err 1146 drivers/media/usb/gspca/ov534_9.c pr_err("reg_r err %d\n", ret); pr_err 1186 drivers/media/usb/gspca/ov534_9.c pr_err("sccb_write failed\n"); pr_err 1194 drivers/media/usb/gspca/ov534_9.c pr_err("sccb_read failed 1\n"); pr_err 1198 drivers/media/usb/gspca/ov534_9.c pr_err("sccb_read failed 2\n"); pr_err 1490 drivers/media/usb/gspca/ov534_9.c pr_err("Unknown sensor %04x", sensor_id); pr_err 1775 drivers/media/usb/gspca/ov534_9.c pr_err("Could not initialize controls\n"); pr_err 102 drivers/media/usb/gspca/pac207.c pr_err("Failed to write registers to index 0x%04X, error %d\n", pr_err 120 drivers/media/usb/gspca/pac207.c pr_err("Failed to write a register (index 0x%04X, value 0x%02X, error %d)\n", pr_err 139 drivers/media/usb/gspca/pac207.c pr_err("Failed to read a register (index 0x%04X, error %d)\n", pr_err 268 drivers/media/usb/gspca/pac207.c pr_err("Could not initialize controls\n"); pr_err 249 drivers/media/usb/gspca/pac7302.c pr_err("reg_w_buf failed i: %02x error %d\n", pr_err 272 drivers/media/usb/gspca/pac7302.c pr_err("reg_w() failed i: %02x v: %02x error %d\n", pr_err 307 drivers/media/usb/gspca/pac7302.c pr_err("reg_w_page() failed i: %02x v: %02x error %d\n", pr_err 678 drivers/media/usb/gspca/pac7302.c pr_err("Could not initialize controls\n"); pr_err 168 drivers/media/usb/gspca/pac7311.c pr_err("reg_w_buf() failed index 0x%02x, error %d\n", pr_err 191 drivers/media/usb/gspca/pac7311.c pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n", pr_err 226 drivers/media/usb/gspca/pac7311.c pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n", pr_err 423 drivers/media/usb/gspca/pac7311.c pr_err("Could not initialize controls\n"); pr_err 76 drivers/media/usb/gspca/se401.c pr_err("write req failed req %#04x val %#04x error %d\n", pr_err 90 drivers/media/usb/gspca/se401.c pr_err("USB_BUF_SZ too small!!\n"); pr_err 101 drivers/media/usb/gspca/se401.c pr_err("read req failed req %#04x error %d\n", pr_err 126 drivers/media/usb/gspca/se401.c pr_err("set feature failed sel %#04x param %#04x error %d\n", pr_err 140 drivers/media/usb/gspca/se401.c pr_err("USB_BUF_SZ too small!!\n"); pr_err 151 drivers/media/usb/gspca/se401.c pr_err("get feature failed sel %#04x error %d\n", pr_err 232 drivers/media/usb/gspca/se401.c pr_err("Wrong descriptor type\n"); pr_err 237 drivers/media/usb/gspca/se401.c pr_err("Bayer format not supported!\n"); pr_err 246 drivers/media/usb/gspca/se401.c pr_err("Too many frame sizes\n"); pr_err 505 drivers/media/usb/gspca/se401.c pr_err("invalid packet len %d restarting stream\n", pr_err 510 drivers/media/usb/gspca/se401.c pr_err("unknown frame info value restarting stream\n"); pr_err 534 drivers/media/usb/gspca/se401.c pr_err("frame size %d expected %d\n", pr_err 664 drivers/media/usb/gspca/se401.c pr_err("Could not initialize controls\n"); pr_err 74 drivers/media/usb/gspca/sn9c2028.c pr_err("command write [%02x] error %d\n", pr_err 92 drivers/media/usb/gspca/sn9c2028.c pr_err("read1 error %d\n", rc); pr_err 109 drivers/media/usb/gspca/sn9c2028.c pr_err("read4 error %d\n", rc); pr_err 131 drivers/media/usb/gspca/sn9c2028.c pr_err("long command status read error %d\n", status); pr_err 829 drivers/media/usb/gspca/sn9c2028.c pr_err("Starting unknown camera, please report this\n"); pr_err 917 drivers/media/usb/gspca/sn9c20x.c pr_err("Read register %02x failed %d\n", reg, result); pr_err 945 drivers/media/usb/gspca/sn9c20x.c pr_err("Write register %02x failed %d\n", reg, result); pr_err 966 drivers/media/usb/gspca/sn9c20x.c pr_err("i2c_w error\n"); pr_err 973 drivers/media/usb/gspca/sn9c20x.c pr_err("i2c_w reg %02x no response\n", buffer[2]); pr_err 1089 drivers/media/usb/gspca/sn9c20x.c pr_err("sensor id for ov9650 doesn't match (0x%04x)\n", id); pr_err 1098 drivers/media/usb/gspca/sn9c20x.c pr_err("OV9650 sensor initialization failed\n"); pr_err 1111 drivers/media/usb/gspca/sn9c20x.c pr_err("OV9655 sensor initialization failed\n"); pr_err 1125 drivers/media/usb/gspca/sn9c20x.c pr_err("SOI968 sensor initialization failed\n"); pr_err 1139 drivers/media/usb/gspca/sn9c20x.c pr_err("OV7660 sensor initialization failed\n"); pr_err 1152 drivers/media/usb/gspca/sn9c20x.c pr_err("OV7670 sensor initialization failed\n"); pr_err 1169 drivers/media/usb/gspca/sn9c20x.c pr_err("MT9V011 sensor initialization failed\n"); pr_err 1187 drivers/media/usb/gspca/sn9c20x.c pr_err("MT9V111 sensor initialization failed\n"); pr_err 1210 drivers/media/usb/gspca/sn9c20x.c pr_err("MT9V112 sensor initialization failed\n"); pr_err 1229 drivers/media/usb/gspca/sn9c20x.c pr_err("MT9M112 sensor initialization failed\n"); pr_err 1241 drivers/media/usb/gspca/sn9c20x.c pr_err("MT9M111 sensor initialization failed\n"); pr_err 1266 drivers/media/usb/gspca/sn9c20x.c pr_err("No MT9M001 chip detected, ID = %x\n\n", id); pr_err 1273 drivers/media/usb/gspca/sn9c20x.c pr_err("MT9M001 sensor initialization failed\n"); pr_err 1285 drivers/media/usb/gspca/sn9c20x.c pr_err("HV7131R Sensor initialization failed\n"); pr_err 1761 drivers/media/usb/gspca/sn9c20x.c pr_err("Could not initialize controls\n"); pr_err 1795 drivers/media/usb/gspca/sn9c20x.c pr_err("Device initialization failed\n"); pr_err 1807 drivers/media/usb/gspca/sn9c20x.c pr_err("Device initialization failed\n"); pr_err 1872 drivers/media/usb/gspca/sn9c20x.c pr_err("Unsupported sensor\n"); pr_err 1077 drivers/media/usb/gspca/sonixb.c pr_err("Could not initialize controls\n"); pr_err 1163 drivers/media/usb/gspca/sonixj.c pr_err("reg_r err %d\n", ret); pr_err 1192 drivers/media/usb/gspca/sonixj.c pr_err("reg_w1 err %d\n", ret); pr_err 1222 drivers/media/usb/gspca/sonixj.c pr_err("reg_w err %d\n", ret); pr_err 1263 drivers/media/usb/gspca/sonixj.c pr_err("i2c_w1 err %d\n", ret); pr_err 1288 drivers/media/usb/gspca/sonixj.c pr_err("i2c_w8 err %d\n", ret); pr_err 1472 drivers/media/usb/gspca/sonixj.c pr_err("Unknown sensor %04x\n", val); pr_err 1510 drivers/media/usb/gspca/sonixj.c pr_err("Unknown sensor ID %04x\n", val); pr_err 1680 drivers/media/usb/gspca/sonixj.c pr_err("Could not initialize controls\n"); pr_err 72 drivers/media/usb/gspca/spca1528.c pr_err("reg_r err %d\n", ret); pr_err 99 drivers/media/usb/gspca/spca1528.c pr_err("reg_w err %d\n", ret); pr_err 124 drivers/media/usb/gspca/spca1528.c pr_err("reg_w err %d\n", ret); pr_err 389 drivers/media/usb/gspca/spca1528.c pr_err("Could not initialize controls\n"); pr_err 329 drivers/media/usb/gspca/spca500.c pr_err("reg write: error %d\n", ret); pr_err 351 drivers/media/usb/gspca/spca500.c pr_err("reg_r_12 err %d\n", ret); pr_err 921 drivers/media/usb/gspca/spca500.c pr_err("Could not initialize controls\n"); pr_err 1759 drivers/media/usb/gspca/spca501.c pr_err("reg write: error %d\n", ret); pr_err 1985 drivers/media/usb/gspca/spca501.c pr_err("Could not initialize controls\n"); pr_err 547 drivers/media/usb/gspca/spca505.c pr_err("reg write: error %d\n", ret); pr_err 647 drivers/media/usb/gspca/spca505.c pr_err("After vector read returns 0x%04x should be 0x0101\n", pr_err 744 drivers/media/usb/gspca/spca505.c pr_err("Could not initialize controls\n"); pr_err 553 drivers/media/usb/gspca/spca506.c pr_err("Could not initialize controls\n"); pr_err 1244 drivers/media/usb/gspca/spca508.c pr_err("reg write: error %d\n", ret); pr_err 1266 drivers/media/usb/gspca/spca508.c pr_err("reg_read err %d\n", ret); pr_err 1477 drivers/media/usb/gspca/spca508.c pr_err("Could not initialize controls\n"); pr_err 287 drivers/media/usb/gspca/spca561.c pr_err("reg write: error %d\n", ret); pr_err 805 drivers/media/usb/gspca/spca561.c pr_err("Could not initialize controls\n"); pr_err 828 drivers/media/usb/gspca/spca561.c pr_err("Could not initialize controls\n"); pr_err 114 drivers/media/usb/gspca/sq905.c pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret); pr_err 125 drivers/media/usb/gspca/sq905.c pr_err("%s: usb_control_msg failed 2 (%d)\n", __func__, ret); pr_err 147 drivers/media/usb/gspca/sq905.c pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret); pr_err 175 drivers/media/usb/gspca/sq905.c pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret); pr_err 184 drivers/media/usb/gspca/sq905.c pr_err("bulk read fail (%d) len %d/%d\n", ret, act_len, size); pr_err 213 drivers/media/usb/gspca/sq905.c pr_err("Couldn't allocate USB buffer\n"); pr_err 87 drivers/media/usb/gspca/sq905c.c pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret); pr_err 106 drivers/media/usb/gspca/sq905c.c pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret); pr_err 134 drivers/media/usb/gspca/sq905c.c pr_err("Couldn't allocate USB buffer\n"); pr_err 426 drivers/media/usb/gspca/sq930x.c pr_err("reg_r %04x failed %d\n", value, ret); pr_err 451 drivers/media/usb/gspca/sq930x.c pr_err("reg_w %04x %04x failed %d\n", value, index, ret); pr_err 474 drivers/media/usb/gspca/sq930x.c pr_err("reg_wb %04x %04x failed %d\n", value, index, ret); pr_err 519 drivers/media/usb/gspca/sq930x.c pr_err("i2c_write failed %d\n", ret); pr_err 573 drivers/media/usb/gspca/sq930x.c pr_err("ucbus_write failed %d\n", ret); pr_err 649 drivers/media/usb/gspca/sq930x.c pr_err("Unknown sensor\n"); pr_err 657 drivers/media/usb/gspca/sq930x.c pr_err("Sensor %s not yet treated\n", pr_err 1045 drivers/media/usb/gspca/sq930x.c pr_err("sd_dq_callback() err %d\n", ret); pr_err 1100 drivers/media/usb/gspca/sq930x.c pr_err("Could not initialize controls\n"); pr_err 57 drivers/media/usb/gspca/stk014.c pr_err("reg_r err %d\n", ret); pr_err 82 drivers/media/usb/gspca/stk014.c pr_err("reg_w err %d\n", ret); pr_err 112 drivers/media/usb/gspca/stk014.c pr_err("rcv_val err %d\n", ret); pr_err 155 drivers/media/usb/gspca/stk014.c pr_err("snd_val err %d\n", ret); pr_err 226 drivers/media/usb/gspca/stk014.c pr_err("init reg: 0x%02x\n", ret); pr_err 261 drivers/media/usb/gspca/stk014.c pr_err("set intf %d %d failed\n", pr_err 390 drivers/media/usb/gspca/stk014.c pr_err("Could not initialize controls\n"); pr_err 64 drivers/media/usb/gspca/stk1135.c pr_err("reg_r 0x%x err %d\n", index, ret); pr_err 90 drivers/media/usb/gspca/stk1135.c pr_err("reg_w 0x%x err %d\n", index, ret); pr_err 118 drivers/media/usb/gspca/stk1135.c pr_err("serial bus timeout: status=0x%02x\n", val); pr_err 134 drivers/media/usb/gspca/stk1135.c pr_err("Sensor read failed\n"); pr_err 156 drivers/media/usb/gspca/stk1135.c pr_err("Sensor write failed\n"); pr_err 600 drivers/media/usb/gspca/stk1135.c pr_err("Could not initialize controls\n"); pr_err 66 drivers/media/usb/gspca/stv0680.c pr_err("usb_control_msg error %i, request = 0x%x, error = %i\n", pr_err 223 drivers/media/usb/gspca/stv0680.c pr_err("Could not get descriptor 0100\n"); pr_err 189 drivers/media/usb/gspca/stv06xx/stv06xx.c pr_err("I2C: Read error writing address: %d\n", err); pr_err 256 drivers/media/usb/gspca/sunplus.c pr_err("reg_r err %d\n", ret); pr_err 286 drivers/media/usb/gspca/sunplus.c pr_err("reg_w_1 err %d\n", ret); pr_err 306 drivers/media/usb/gspca/sunplus.c pr_err("reg_w_riv err %d\n", ret); pr_err 963 drivers/media/usb/gspca/sunplus.c pr_err("Could not initialize controls\n"); pr_err 333 drivers/media/usb/gspca/t613.c pr_err("Out of memory\n"); pr_err 359 drivers/media/usb/gspca/t613.c pr_err("Out of memory\n"); pr_err 413 drivers/media/usb/gspca/t613.c pr_err("Bad sensor reset %02x\n", byte); pr_err 602 drivers/media/usb/gspca/t613.c pr_err("unknown sensor %04x\n", sensor_id); pr_err 617 drivers/media/usb/gspca/t613.c pr_err("Bad sensor reset %02x\n", test_byte); pr_err 991 drivers/media/usb/gspca/t613.c pr_err("Could not initialize controls\n"); pr_err 987 drivers/media/usb/gspca/topro.c pr_err("reg_w err %d\n", ret); pr_err 1005 drivers/media/usb/gspca/topro.c pr_err("reg_r err %d\n", ret); pr_err 1089 drivers/media/usb/gspca/topro.c pr_err("bulk write error %d tag=%02x\n", pr_err 4712 drivers/media/usb/gspca/topro.c pr_err("bulk err %d\n", ret); pr_err 4728 drivers/media/usb/gspca/topro.c pr_err("bulk err %d\n", ret); pr_err 4915 drivers/media/usb/gspca/topro.c pr_err("Could not initialize controls\n"); pr_err 316 drivers/media/usb/gspca/tv8532.c pr_err("Could not initialize controls\n"); pr_err 2907 drivers/media/usb/gspca/vc032x.c pr_err("reg_r err %d\n", ret); pr_err 2949 drivers/media/usb/gspca/vc032x.c pr_err("reg_w err %d\n", ret); pr_err 2972 drivers/media/usb/gspca/vc032x.c pr_err("I2c Bus Busy Wait %02x\n", gspca_dev->usb_buf[0]); pr_err 3084 drivers/media/usb/gspca/vc032x.c pr_err("i2c_write timeout\n"); pr_err 3169 drivers/media/usb/gspca/vc032x.c pr_err("Unknown sensor...\n"); pr_err 3776 drivers/media/usb/gspca/vc032x.c pr_err("Could not initialize controls\n"); pr_err 79 drivers/media/usb/gspca/vicam.c pr_err("control msg req %02X error %d\n", request, ret); pr_err 152 drivers/media/usb/gspca/vicam.c pr_err("bulk read fail (%d) len %d/%d\n", pr_err 178 drivers/media/usb/gspca/vicam.c pr_err("Couldn't allocate USB buffer\n"); pr_err 234 drivers/media/usb/gspca/vicam.c pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret); pr_err 300 drivers/media/usb/gspca/vicam.c pr_err("Could not initialize controls\n"); pr_err 74 drivers/media/usb/gspca/w996Xcf.c pr_err("Write FSB registers failed (%d)\n", ret); pr_err 104 drivers/media/usb/gspca/w996Xcf.c pr_err("Write SB reg [01] %04x failed\n", value); pr_err 134 drivers/media/usb/gspca/w996Xcf.c pr_err("Read SB reg [01] failed\n"); pr_err 675 drivers/media/usb/gspca/xirlink_cit.c pr_err("Failed to write a register (index 0x%04X, value 0x%02X, error %d)\n", pr_err 691 drivers/media/usb/gspca/xirlink_cit.c pr_err("Failed to read a register (index 0x%04X, error %d)\n", pr_err 1441 drivers/media/usb/gspca/xirlink_cit.c pr_err("Couldn't get altsetting\n"); pr_err 2696 drivers/media/usb/gspca/xirlink_cit.c pr_err("set alt 1 err %d\n", ret); pr_err 3055 drivers/media/usb/gspca/xirlink_cit.c pr_err("Could not initialize controls\n"); pr_err 5544 drivers/media/usb/gspca/zc3xx.c pr_err("reg_r err %d\n", ret); pr_err 5566 drivers/media/usb/gspca/zc3xx.c pr_err("reg_w_i err %d\n", ret); pr_err 5584 drivers/media/usb/gspca/zc3xx.c pr_err("i2c_r status error %02x\n", retbyte); pr_err 5606 drivers/media/usb/gspca/zc3xx.c pr_err("i2c_w status error %02x\n", retbyte); pr_err 6470 drivers/media/usb/gspca/zc3xx.c pr_err("Could not initialize controls\n"); pr_err 6630 drivers/media/usb/gspca/zc3xx.c pr_err("Unknown sensor %04x\n", sensor); pr_err 1206 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c pr_err(KBUILD_MODNAME pr_err 1226 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev due to unrecognized config\n"); pr_err 1252 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c pr_err(KBUILD_MODNAME pr_err 477 drivers/media/usb/s2255/s2255drv.c pr_err("s2255: can't submit urb\n"); pr_err 632 drivers/media/usb/s2255/s2255drv.c pr_err("s2255: =======no frame\n"); pr_err 2108 drivers/media/usb/s2255/s2255drv.c pr_err("s2255: start read pipe failed\n"); pr_err 92 drivers/media/usb/siano/smsusb.c pr_err("error, urb status %d (-ESHUTDOWN), %d bytes\n", pr_err 114 drivers/media/usb/siano/smsusb.c pr_err("invalid response msglen %d offset %d size %d\n", pr_err 137 drivers/media/usb/siano/smsusb.c pr_err("invalid response msglen %d actual %d\n", pr_err 141 drivers/media/usb/siano/smsusb.c pr_err("error, urb status %d, %d bytes\n", pr_err 157 drivers/media/usb/siano/smsusb.c pr_err("smscore_getbuffer(...) returned NULL\n"); pr_err 197 drivers/media/usb/siano/smsusb.c pr_err("smsusb_submit_urb(...) failed\n"); pr_err 259 drivers/media/usb/siano/smsusb.c pr_err("invalid firmware id specified %d\n", id); pr_err 291 drivers/media/usb/siano/smsusb.c pr_err("failed to allocate firmware buffer\n"); pr_err 310 drivers/media/usb/siano/smsusb.c pr_err("product string not found\n"); pr_err 329 drivers/media/usb/siano/smsusb.c pr_err("invalid firmware id specified %d\n", mode); pr_err 432 drivers/media/usb/siano/smsusb.c pr_err("Unspecified sms device type!\n"); pr_err 455 drivers/media/usb/siano/smsusb.c pr_err("smscore_register_device(...) failed, rc %d\n", rc); pr_err 477 drivers/media/usb/siano/smsusb.c pr_err("smsusb_start_streaming(...) failed\n"); pr_err 486 drivers/media/usb/siano/smsusb.c pr_err("smscore_start_device(...) failed\n"); pr_err 520 drivers/media/usb/siano/smsusb.c pr_err("usb_set_interface failed, rc %d\n", rc); pr_err 561 drivers/media/usb/siano/smsusb.c pr_err("Failed to put stellar in warm state. Error: %d\n", pr_err 67 drivers/media/usb/stk1160/stk1160.h pr_err("stk1160: " fmt, ## args) pr_err 236 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("stk_sensor_outb failed, status=0x%02x\n", pr_err 259 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("stk_sensor_inb failed, status=0x%02x\n", pr_err 363 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("Sensor resetting failed\n"); pr_err 370 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("Strange error reading sensor ID\n"); pr_err 374 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("Huh? you don't have a sensor from ovt\n"); pr_err 379 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("Could not read sensor model\n"); pr_err 518 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("Unsupported mode %d\n", dev->vsettings.mode); pr_err 543 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("Unsupported colorspace\n"); pr_err 563 drivers/media/usb/stkwebcam/stk-sensor.c pr_err("stk_sensor_set_hw failed (VGA)\n"); pr_err 182 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("FIXME: Buffers are not allocated\n"); pr_err 188 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("usb_set_interface failed !\n"); pr_err 190 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("error awaking the sensor\n"); pr_err 231 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("usb_set_interface failed !\n"); pr_err 233 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("error suspending the sensor\n"); pr_err 320 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("isoc_handler called with NULL device !\n"); pr_err 333 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("isoc_handler: urb->status == %d\n", urb->status); pr_err 349 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Frame %d has error %d\n", pr_err 418 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Error (%d) re-submitting urb in stk_isoc_handler\n", pr_err 437 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("isobufs already allocated. Bad\n"); pr_err 442 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Unable to allocate iso buffers\n"); pr_err 449 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Failed to allocate iso buffer %d\n", i); pr_err 454 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("isobuf data already allocated\n"); pr_err 461 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Killing URB\n"); pr_err 570 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("sio_bufs already allocated\n"); pr_err 693 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("BUG: No siobufs ready\n"); pr_err 901 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("ERROR: mode invalid\n"); pr_err 979 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Something is broken in %s\n", __func__); pr_err 1235 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("We are leaking memory\n"); pr_err 1259 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("v4l registration failed\n"); pr_err 1283 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Out of memory !\n"); pr_err 1347 drivers/media/usb/stkwebcam/stk-webcam.c pr_err("Could not find isoc-in endpoint\n"); pr_err 265 drivers/media/usb/tm6000/tm6000-dvb.c pr_err("tm6000: couldn't register the adapter!\n"); pr_err 1564 drivers/media/usb/usbvision/usbvision-video.c pr_err("%s: usb_get_intfdata() failed\n", __func__); pr_err 756 drivers/media/v4l2-core/tuner-core.c pr_err("failed to initialize media entity!\n"); pr_err 892 drivers/media/v4l2-core/v4l2-dev.c pr_err("%s called with unknown type: %d\n", pr_err 941 drivers/media/v4l2-core/v4l2-dev.c pr_err("could not get a free device node number\n"); pr_err 956 drivers/media/v4l2-core/v4l2-dev.c pr_err("could not get a free minor\n"); pr_err 966 drivers/media/v4l2-core/v4l2-dev.c pr_err("video_device not empty!\n"); pr_err 987 drivers/media/v4l2-core/v4l2-dev.c pr_err("%s: cdev_add failed\n", __func__); pr_err 1000 drivers/media/v4l2-core/v4l2-dev.c pr_err("%s: device_register failed\n", __func__); pr_err 33 drivers/media/v4l2-core/videobuf-dma-contig.c pr_err("magic mismatch: %x expected %x\n", (is), (should)); \ pr_err 59 drivers/memory/atmel-sdramc.c pr_err("AT91 RAMC: couldn't get mpddr clock\n"); pr_err 805 drivers/memory/emif.c pr_err("TIMEOUT Overflow - lpmode=%d perf=%d pwr=%d freq=%d\n", pr_err 1549 drivers/memory/emif.c pr_err("%s: error getting device data\n", __func__); pr_err 532 drivers/memory/mtk-smi.c pr_err("Failed to register SMI driver\n"); pr_err 538 drivers/memory/mtk-smi.c pr_err("Failed to register SMI-LARB driver\n"); pr_err 620 drivers/memory/omap-gpmc.c pr_err("%s: GPMC CS%d: %s %d ns, %d ticks > %d ticks\n", pr_err 734 drivers/memory/omap-gpmc.c pr_err("%s: waitmonitoringtime %3d ns too large for greatest gpmcfclkdivider.\n", pr_err 953 drivers/memory/omap-gpmc.c pr_err("%s: requested chip-select is disabled\n", __func__); pr_err 988 drivers/memory/omap-gpmc.c pr_err("%s: requested chip-select is disabled\n", __func__); pr_err 1068 drivers/memory/omap-gpmc.c pr_err("%s: command not supported\n", __func__); pr_err 1832 drivers/memory/omap-gpmc.c pr_err("%s: invalid width %d!", __func__, p->device_width); pr_err 1838 drivers/memory/omap-gpmc.c pr_err("%s: invalid configuration!\n", __func__); pr_err 1845 drivers/memory/omap-gpmc.c pr_err("%s: invalid multiplex configuration!\n", __func__); pr_err 1857 drivers/memory/omap-gpmc.c pr_err("%s: invalid page/burst-length (%d)\n", pr_err 1864 drivers/memory/omap-gpmc.c pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); pr_err 2242 drivers/memory/omap-gpmc.c pr_err("%s: number of chip-selects not defined\n", __func__); pr_err 2245 drivers/memory/omap-gpmc.c pr_err("%s: all chip-selects are disabled\n", __func__); pr_err 2248 drivers/memory/omap-gpmc.c pr_err("%s: number of supported chip-selects cannot be > %d\n", pr_err 2256 drivers/memory/omap-gpmc.c pr_err("%s: number of wait pins not found!\n", __func__); pr_err 162 drivers/memstick/core/ms_block.c pr_err("BUG: free block counts don't match the bitmap"); pr_err 173 drivers/memstick/core/ms_block.c pr_err( pr_err 193 drivers/memstick/core/ms_block.c pr_err("BUG: attempt to mark already unused pba %d as unused" , pba); pr_err 775 drivers/memstick/core/ms_block.c pr_err("Switch to parallel failed"); pr_err 843 drivers/memstick/core/ms_block.c pr_err("erase failed, marking pba %d as bad", pba); pr_err 898 drivers/memstick/core/ms_block.c pr_err("BUG: attempt to read beyond the end of the card at pba %d", pba); pr_err 928 drivers/memstick/core/ms_block.c pr_err("uncorrectable error on read of pba %d, page %d", pr_err 938 drivers/memstick/core/ms_block.c pr_err("read of pba %d, page %d failed with error %d", pr_err 955 drivers/memstick/core/ms_block.c pr_err("BUG: attempt to read beyond the end of card at pba %d", pba); pr_err 1006 drivers/memstick/core/ms_block.c pr_err( pr_err 1012 drivers/memstick/core/ms_block.c pr_err( pr_err 1018 drivers/memstick/core/ms_block.c pr_err("BUG: write: lba zone mismatch"); pr_err 1024 drivers/memstick/core/ms_block.c pr_err("BUG: write: attempt to write to boot blocks!"); pr_err 1063 drivers/memstick/core/ms_block.c pr_err("write failed, trying to erase the pba %d", pba); pr_err 1083 drivers/memstick/core/ms_block.c pr_err("NO free blocks in the zone %d, to use for a write, (media is WORN out) switching to RO mode", zone); pr_err 1102 drivers/memstick/core/ms_block.c pr_err("BUG: cant get a free block"); pr_err 1153 drivers/memstick/core/ms_block.c pr_err("block update error after %d tries, switching to r/o mode", try); pr_err 1241 drivers/memstick/core/ms_block.c pr_err("media doesn't contain master page, aborting"); pr_err 1297 drivers/memstick/core/ms_block.c pr_err( pr_err 1402 drivers/memstick/core/ms_block.c pr_err("unknown error %d on read of oob of pba %d - aborting", pr_err 1561 drivers/memstick/core/ms_block.c pr_err("read error on sector %d, contents probably damaged", page); pr_err 1794 drivers/memstick/core/ms_block.c pr_err("Scan of media failed"); pr_err 2337 drivers/memstick/core/ms_block.c pr_err("failed to register memstick driver (error %d)\n", rc); pr_err 280 drivers/memstick/core/ms_block.h pr_err(format "\n", ## __VA_ARGS__); \ pr_err 1269 drivers/mfd/88pm860x-core.c pr_err("Failed to register 88PM860x I2C driver: %d\n", ret); pr_err 1499 drivers/mfd/ab8500-debugfs.c pr_err("abx500_set_reg failed %d, %d", err, __LINE__); pr_err 2423 drivers/mfd/ab8500-debugfs.c pr_err("abx500_set_reg failed %d, %d", ret, __LINE__); pr_err 41 drivers/mfd/ab8500-sysctrl.c pr_err("%s: sysctrl not initialized\n", __func__); pr_err 124 drivers/mfd/ab8500-sysctrl.c pr_err("invalid bank\n"); pr_err 161 drivers/mfd/altera-sysmgr.c pr_err("regmap init failed\n"); pr_err 474 drivers/mfd/cros_ec_dev.c pr_err(CROS_EC_DEV_NAME ": failed to register device class\n"); pr_err 201 drivers/mfd/da9052-i2c.c pr_err("DA9052 I2C registration failed %d\n", ret); pr_err 90 drivers/mfd/da9052-spi.c pr_err("Failed to register DA9052 SPI driver, %d\n", ret); pr_err 87 drivers/mfd/da9055-i2c.c pr_err("DA9055 I2C registration failed %d\n", ret); pr_err 965 drivers/mfd/db8500-prcmu.c pr_err("prcmu: Bad clock divider %d in %s\n", pr_err 1205 drivers/mfd/db8500-prcmu.c pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", pr_err 1299 drivers/mfd/db8500-prcmu.c pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", pr_err 2194 drivers/mfd/db8500-prcmu.c pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", pr_err 2244 drivers/mfd/db8500-prcmu.c pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", pr_err 2685 drivers/mfd/db8500-prcmu.c pr_err("Failed to create irqdomain\n"); pr_err 2745 drivers/mfd/db8500-prcmu.c pr_err("%s: ioremap() of prcmu registers failed!\n", __func__); pr_err 3118 drivers/mfd/db8500-prcmu.c pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); pr_err 3129 drivers/mfd/db8500-prcmu.c pr_err("prcmu: Failed to add subdevices\n"); pr_err 3140 drivers/mfd/db8500-prcmu.c pr_err("prcmu: Failed to add subdevices\n"); pr_err 3148 drivers/mfd/db8500-prcmu.c pr_err("prcmu: Failed to add ab8500 subdevice\n"); pr_err 394 drivers/mfd/lochnagar-i2c.c pr_err("Failed to register Lochnagar driver: %d\n", ret); pr_err 334 drivers/mfd/max8907.c pr_err("Failed to register I2C driver: %d\n", ret); pr_err 257 drivers/mfd/max8925-i2c.c pr_err("Failed to register MAX8925 I2C driver: %d\n", ret); pr_err 176 drivers/mfd/menelaus.c pr_err(DRIVER_NAME ": write error"); pr_err 188 drivers/mfd/menelaus.c pr_err(DRIVER_NAME ": read error"); pr_err 1172 drivers/mfd/menelaus.c pr_err(DRIVER_NAME ": device not found"); pr_err 461 drivers/mfd/palmas.c pr_err("%s: Unable to write to DEV_CTRL_DEV_ON: %d\n", pr_err 90 drivers/mfd/qcom-pm8xxx.c pr_err("Failed Selecting Block %d rc=%d\n", bp, rc); pr_err 96 drivers/mfd/qcom-pm8xxx.c pr_err("Failed Reading Status rc=%d\n", rc); pr_err 110 drivers/mfd/qcom-pm8xxx.c pr_err("Failed Selecting Block %d rc=%d\n", bp, rc); pr_err 117 drivers/mfd/qcom-pm8xxx.c pr_err("Failed Configuring IRQ rc=%d\n", rc); pr_err 130 drivers/mfd/qcom-pm8xxx.c pr_err("Failed reading %d block ret=%d", block, ret); pr_err 134 drivers/mfd/qcom-pm8xxx.c pr_err("block bit set in master but no irqs: %d", block); pr_err 157 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to read master %d ret=%d\n", master, ret); pr_err 161 drivers/mfd/qcom-pm8xxx.c pr_err("master bit set in root but no blocks: %d", master); pr_err 184 drivers/mfd/qcom-pm8xxx.c pr_err("Can't read root status ret=%d\n", ret); pr_err 208 drivers/mfd/qcom-pm8xxx.c pr_err("Reading block %d failed ret=%d", block, ret); pr_err 246 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to read master 0 ret=%d\n", ret); pr_err 261 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to read master 1 ret=%d\n", ret); pr_err 345 drivers/mfd/qcom-pm8xxx.c pr_err("Failed Selecting Block %d rc=%d\n", block, rc); pr_err 351 drivers/mfd/qcom-pm8xxx.c pr_err("Failed Reading Status rc=%d\n", rc); pr_err 421 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to mask IRQ:%d rc=%d\n", pmirq, rc); pr_err 429 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to CLEAR IRQ:%d rc=%d\n", pmirq, rc); pr_err 448 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to read/write unmask IRQ:%d rc=%d\n", pmirq, rc); pr_err 469 drivers/mfd/qcom-pm8xxx.c pr_err("Reading Status of IRQ %d failed rc=%d\n", pmirq, rc); pr_err 543 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to read hw rev reg %d:rc=%d\n", REG_HWREV, rc); pr_err 552 drivers/mfd/qcom-pm8xxx.c pr_err("Failed to read hw rev 2 reg %d:rc=%d\n", pr_err 97 drivers/mfd/syscon.c pr_err("Failed to retrieve valid hwlock: %d\n", ret); pr_err 112 drivers/mfd/syscon.c pr_err("regmap init failed\n"); pr_err 182 drivers/mfd/tqmx86.c pr_err("tqmx86: Invalid GPIO IRQ (%d)\n", gpio_irq); pr_err 417 drivers/mfd/twl-core.c pr_err("%s: not initialized\n", DRIVER_NAME); pr_err 421 drivers/mfd/twl-core.c pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); pr_err 452 drivers/mfd/twl-core.c pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n", pr_err 480 drivers/mfd/twl-core.c pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n", pr_err 522 drivers/mfd/twl-core.c pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err); pr_err 529 drivers/mfd/twl-core.c pr_err("TWL4030: unable to read IDCODE -%d\n", err); pr_err 535 drivers/mfd/twl-core.c pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err); pr_err 585 drivers/mfd/twl-core.c pr_err("TWL4030: HFCLK is not configured\n"); pr_err 604 drivers/mfd/twl-core.c pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); pr_err 1030 drivers/mfd/twl-core.c pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e); pr_err 342 drivers/mfd/twl4030-irq.c pr_err("twl4030: err %d initializing %s %s\n", pr_err 358 drivers/mfd/twl4030-irq.c pr_err("twl4030: err %d initializing %s %s\n", pr_err 493 drivers/mfd/twl4030-irq.c pr_err("twl4030: %s, %s --> %d\n", __func__, pr_err 513 drivers/mfd/twl4030-irq.c pr_err("twl4030: %s, %s --> %d\n", __func__, pr_err 540 drivers/mfd/twl4030-irq.c pr_err("twl4030: %s, %s --> %d\n", __func__, pr_err 590 drivers/mfd/twl4030-irq.c pr_err("twl4030: %s SIH, read ISR error %d\n", pr_err 604 drivers/mfd/twl4030-irq.c pr_err("twl4030: %s SIH, invalid ISR bit %d\n", pr_err 760 drivers/mfd/twl4030-irq.c pr_err("twl4030: can't yet clean up IRQs?\n"); pr_err 262 drivers/mfd/twl4030-power.c pr_err("TWL4030 wakeup sequence for P3 config error\n"); pr_err 313 drivers/mfd/twl4030-power.c pr_err("TWL4030 wakeup sequence for P1 and P2" \ pr_err 326 drivers/mfd/twl4030-power.c pr_err("TWL4030 sleep sequence config error\n"); pr_err 368 drivers/mfd/twl4030-power.c pr_err("TWL4030 warmreset seq config error\n"); pr_err 381 drivers/mfd/twl4030-power.c pr_err("TWL4030 Resource %d does not exist\n", pr_err 392 drivers/mfd/twl4030-power.c pr_err("TWL4030 Resource %d group could not be read\n", pr_err 403 drivers/mfd/twl4030-power.c pr_err("TWL4030 failed to program devgroup\n"); pr_err 412 drivers/mfd/twl4030-power.c pr_err("TWL4030 Resource %d type could not be read\n", pr_err 430 drivers/mfd/twl4030-power.c pr_err("TWL4030 failed to program resource type\n"); pr_err 438 drivers/mfd/twl4030-power.c pr_err("TWL4030 Resource %d remap could not be read\n", pr_err 457 drivers/mfd/twl4030-power.c pr_err("TWL4030 failed to program remap\n"); pr_err 473 drivers/mfd/twl4030-power.c pr_err("TWL4030 scripts too big error\n"); pr_err 519 drivers/mfd/twl4030-power.c pr_err("twl4030: unable to unlock PROTECT_KEY\n"); pr_err 526 drivers/mfd/twl4030-power.c pr_err("twl4030: unable to unlock PROTECT_KEY\n"); pr_err 558 drivers/mfd/twl4030-power.c pr_err("TWL4030 Unable to relock registers\n"); pr_err 650 drivers/mfd/twl4030-power.c pr_err("TWL4030 Register access failed: %i\n", err); pr_err 669 drivers/mfd/twl4030-power.c pr_err("TWL4030 Unable to configure start-up\n"); pr_err 674 drivers/mfd/twl4030-power.c pr_err("TWL4030 Unable to power off\n"); pr_err 903 drivers/mfd/twl4030-power.c pr_err("TWL4030 Unable to unlock registers\n"); pr_err 915 drivers/mfd/twl4030-power.c pr_err("TWL4030 failed to load scripts\n"); pr_err 920 drivers/mfd/twl4030-power.c pr_err("TWL4030 failed to configure resource\n"); pr_err 937 drivers/mfd/twl4030-power.c pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n"); pr_err 949 drivers/mfd/twl4030-power.c pr_err("TWL4030 Unable to relock registers\n"); pr_err 132 drivers/mfd/twl6030-irq.c pr_err("twl6030 IRQ wake enable failed\n"); pr_err 195 drivers/mfd/twl6030-irq.c pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n", pr_err 275 drivers/mfd/twl6030-irq.c pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret); pr_err 282 drivers/mfd/twl6030-irq.c pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret); pr_err 290 drivers/mfd/twl6030-irq.c pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n", pr_err 298 drivers/mfd/twl6030-irq.c pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n", pr_err 318 drivers/mfd/twl6030-irq.c pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__); pr_err 246 drivers/mfd/wl1273-core.c pr_err(WL1273_FM_DRIVER_NAME pr_err 115 drivers/mfd/wm831x-i2c.c pr_err("Failed to register wm831x I2C driver: %d\n", ret); pr_err 115 drivers/mfd/wm831x-spi.c pr_err("Failed to register WM831x SPI driver: %d\n", ret); pr_err 159 drivers/mfd/wm8400-core.c pr_err("Failed to register I2C driver: %d\n", ret); pr_err 48 drivers/misc/atmel-ssc.c pr_err("ssc: ssc%d platform device is missing\n", ssc_num); pr_err 71 drivers/misc/cxl/api.c pr_err("Cannot mount cxl pseudo filesystem: %d\n", rc); pr_err 674 drivers/misc/cxl/file.c pr_err("Unable to allocate CXL major number: %i\n", rc); pr_err 682 drivers/misc/cxl/file.c pr_err("Unable to create CXL class\n"); pr_err 160 drivers/misc/cxl/flash.c pr_err("cxl: Could not update property %s - %i\n", pr_err 868 drivers/misc/cxl/guest.c pr_err("Unexpected AFU(%d) error state: %#x\n", pr_err 1068 drivers/misc/cxl/guest.c pr_err("ABORTING:Bad operational status of the device\n"); pr_err 82 drivers/misc/cxl/hcalls.c pr_err(format, __VA_ARGS__); \ pr_err 119 drivers/misc/cxl/main.c pr_err("cxl_alloc_sst: Unable to allocate segment table\n"); pr_err 246 drivers/misc/cxl/native.c pr_err("cxl_alloc_spa: Unable to allocate scheduled process area\n"); pr_err 459 drivers/misc/cxl/native.c pr_err("cxl: Error adding process element to AFU\n"); pr_err 99 drivers/misc/cxl/of.c pr_err("Invalid address type %d found in %s property of AFU\n", pr_err 389 drivers/misc/cxl/pci.c pr_err("cxl: invalid phb index\n"); pr_err 396 drivers/misc/cxl/pci.c pr_err("cxl: invalid capp unit id (phb_index: %d)\n", pr_err 1719 drivers/misc/cxl/pci.c pr_err("cxl: np = NULL\n"); pr_err 748 drivers/misc/eeprom/at24.c pr_err("at24: at24_io_limit must not be 0!\n"); pr_err 95 drivers/misc/eeprom/digsy_mtc_eeprom.c pr_err("can't request gpio %d\n", GPIO_EEPROM_OE); pr_err 1539 drivers/misc/fastrpc.c pr_err("fastrpc: failed to register cb driver\n"); pr_err 1545 drivers/misc/fastrpc.c pr_err("fastrpc: failed to register rpmsg driver\n"); pr_err 1365 drivers/misc/genwqe/card_base.c pr_err("[%s] create class failed\n", __func__); pr_err 1375 drivers/misc/genwqe/card_base.c pr_err("[%s] pci_reg_driver (rc=%d)\n", __func__, rc); pr_err 1300 drivers/misc/habanalabs/device.c pr_err("Failed to initialize hl%d. Device is NOT usable !\n", pr_err 93 drivers/misc/habanalabs/habanalabs_drv.c pr_err("Couldn't find device %d:%d\n", pr_err 184 drivers/misc/habanalabs/habanalabs_drv.c pr_err("Couldn't find device %d:%d\n", pr_err 304 drivers/misc/habanalabs/habanalabs_drv.c pr_err("too many devices in the system\n"); pr_err 352 drivers/misc/habanalabs/habanalabs_drv.c pr_err("device pointer is NULL in suspend\n"); pr_err 366 drivers/misc/habanalabs/habanalabs_drv.c pr_err("device pointer is NULL in resume\n"); pr_err 461 drivers/misc/habanalabs/habanalabs_drv.c pr_err("unable to get major\n"); pr_err 469 drivers/misc/habanalabs/habanalabs_drv.c pr_err("failed to allocate class\n"); pr_err 478 drivers/misc/habanalabs/habanalabs_drv.c pr_err("failed to register pci device\n"); pr_err 1225 drivers/misc/ibmvmc.c pr_err("ibmvmc: setup_hmc success but no hmc\n"); pr_err 1316 drivers/misc/ibmvmc.c pr_err("ibmvmc: requestvmc: h_request_vmc not supported\n"); pr_err 1319 drivers/misc/ibmvmc.c pr_err("ibmvmc: requestvmc: hypervisor denied vmc request\n"); pr_err 1322 drivers/misc/ibmvmc.c pr_err("ibmvmc: requestvmc: hypervisor hardware fault\n"); pr_err 1325 drivers/misc/ibmvmc.c pr_err("ibmvmc: requestvmc: vmc resource unavailable\n"); pr_err 1328 drivers/misc/ibmvmc.c pr_err("ibmvmc: requestvmc: system cannot be vmc managed\n"); pr_err 1331 drivers/misc/ibmvmc.c pr_err("ibmvmc: requestvmc: invalid parameter\n"); pr_err 2359 drivers/misc/ibmvmc.c pr_err("ibmvmc: misc registration failed\n"); pr_err 2388 drivers/misc/ibmvmc.c pr_err("ibmvmc: rc %d from vio_register_driver\n", rc); pr_err 931 drivers/misc/lis3lv02d/lis3lv02d.c pr_err("No second IRQ. Limited functionality\n"); pr_err 1156 drivers/misc/lis3lv02d/lis3lv02d.c pr_err("unknown sensor type 0x%X\n", lis3->whoami); pr_err 1184 drivers/misc/lis3lv02d/lis3lv02d.c pr_err("joystick initialization failed\n"); pr_err 1233 drivers/misc/lis3lv02d/lis3lv02d.c pr_err("Cannot get IRQ\n"); pr_err 1242 drivers/misc/lis3lv02d/lis3lv02d.c pr_err("misc_register failed\n"); pr_err 207 drivers/misc/lkdtm/bugs.c pr_err("Overwrite did not happen, but no BUG?!\n"); pr_err 209 drivers/misc/lkdtm/bugs.c pr_err("list_add() corruption not detected!\n"); pr_err 232 drivers/misc/lkdtm/bugs.c pr_err("Overwrite did not happen, but no BUG?!\n"); pr_err 234 drivers/misc/lkdtm/bugs.c pr_err("list_del() corruption not detected!\n"); pr_err 258 drivers/misc/lkdtm/bugs.c pr_err("FAIL: accessed page before stack!\n"); pr_err 272 drivers/misc/lkdtm/bugs.c pr_err("FAIL: accessed page after stack!\n"); pr_err 287 drivers/misc/lkdtm/bugs.c pr_err("FAIL: SMEP not in use\n"); pr_err 295 drivers/misc/lkdtm/bugs.c pr_err("FAIL: pinning SMEP failed!\n"); pr_err 331 drivers/misc/lkdtm/bugs.c pr_err("FAIL: cleared SMEP not detected!\n"); pr_err 337 drivers/misc/lkdtm/bugs.c pr_err("FAIL: this test is x86_64-only\n"); pr_err 401 drivers/misc/lkdtm/core.c pr_err("Need both cpoint_type and cpoint_name or neither\n"); pr_err 408 drivers/misc/lkdtm/core.c pr_err("Unknown crashtype '%s'\n", cpoint_type); pr_err 421 drivers/misc/lkdtm/core.c pr_err("Invalid crashpoint %s\n", cpoint_name); pr_err 27 drivers/misc/lkdtm/refcount.c pr_err("Fail: refcount wrapped to %d\n", refcount_read(ref)); pr_err 105 drivers/misc/lkdtm/refcount.c pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref)); pr_err 148 drivers/misc/lkdtm/refcount.c pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref)); pr_err 225 drivers/misc/lkdtm/refcount.c pr_err("Fail: refcount went past zero!\n"); pr_err 227 drivers/misc/lkdtm/refcount.c pr_err("Fail: Zero not detected!?\n"); pr_err 250 drivers/misc/lkdtm/refcount.c pr_err("Fail: refcount went past zero\n"); pr_err 252 drivers/misc/lkdtm/refcount.c pr_err("Fail: Zero not detected!?\n"); pr_err 271 drivers/misc/lkdtm/refcount.c pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref)); pr_err 373 drivers/misc/lkdtm/refcount.c pr_err("atomic timing: out of sync up/down cycle: %u\n", i - 1); pr_err 398 drivers/misc/lkdtm/refcount.c pr_err("refcount: out of sync up/down cycle: %u\n", i - 1); pr_err 36 drivers/misc/lkdtm/stackleak.c pr_err("FAIL: not enough stack space for the test\n"); pr_err 55 drivers/misc/lkdtm/stackleak.c pr_err("FAIL: thread stack is not erased (checked %lu bytes)\n", pr_err 66 drivers/misc/lkdtm/stackleak.c pr_err("FAIL: thread stack is NOT properly erased\n"); pr_err 336 drivers/misc/lkdtm/usercopy.c pr_err("copy_to_user() to noncanonical address succeeded!?\n"); pr_err 1013 drivers/misc/mei/main.c pr_err("couldn't create class\n"); pr_err 1020 drivers/misc/mei/main.c pr_err("unable to allocate char dev region\n"); pr_err 1026 drivers/misc/mei/main.c pr_err("unable to initialize bus\n"); pr_err 306 drivers/misc/mic/card/mic_x100.c pr_err("%s not running on X100 ret %d\n", __func__, ret); pr_err 317 drivers/misc/mic/card/mic_x100.c pr_err("platform_device_register_full ret %d\n", ret); pr_err 322 drivers/misc/mic/card/mic_x100.c pr_err("platform_driver_register ret %d\n", ret); pr_err 349 drivers/misc/mic/cosm/cosm_main.c pr_err("class_create failed ret %d\n", ret); pr_err 356 drivers/misc/mic/cosm/cosm_main.c pr_err("cosm_register_driver failed ret %d\n", ret); pr_err 298 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d rc %d\n", __func__, __LINE__, rc); pr_err 323 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d scif_open failed\n", __func__, __LINE__); pr_err 329 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d scif_bind failed rc %d\n", pr_err 336 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d scif_listen rc %d\n", __func__, __LINE__, rc); pr_err 365 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d cosm_scif_listen rc %d\n", pr_err 373 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d kthread_run rc %d\n", __func__, __LINE__, rc); pr_err 391 drivers/misc/mic/cosm/cosm_scif_server.c pr_err("%s %d send_sig rc %d\n", pr_err 233 drivers/misc/mic/cosm_client/cosm_scif_client.c pr_err("%s %d send_sig rc %d\n", pr_err 255 drivers/misc/mic/cosm_client/cosm_scif_client.c pr_err("scif_client_register failed rc %d\n", rc); pr_err 314 drivers/misc/mic/host/mic_main.c pr_err("pci_register_driver failed ret %d\n", ret); pr_err 75 drivers/misc/ocxl/afu_irq.c pr_err("irq_create_mapping failed\n"); pr_err 91 drivers/misc/ocxl/afu_irq.c pr_err("request_irq failed: %d\n", rc); pr_err 596 drivers/misc/ocxl/file.c pr_err("Unable to allocate ocxl major number: %d\n", rc); pr_err 602 drivers/misc/ocxl/file.c pr_err("Unable to create ocxl class\n"); pr_err 615 drivers/misc/pti.c pr_err("%s(%d): buf allocation failed\n", pr_err 803 drivers/misc/pti.c pr_err("%s(%d): CHAR registration failed of pti driver\n", pr_err 805 drivers/misc/pti.c pr_err("%s(%d): Error value returned: %d\n", pr_err 919 drivers/misc/pti.c pr_err("%s(%d): Memory allocation failed for ptiTTY driver\n", pr_err 938 drivers/misc/pti.c pr_err("%s(%d): TTY registration failed of pti driver\n", pr_err 940 drivers/misc/pti.c pr_err("%s(%d): Error value returned: %d\n", pr_err 948 drivers/misc/pti.c pr_err("%s(%d): PCI registration failed of pti driver\n", pr_err 950 drivers/misc/pti.c pr_err("%s(%d): Error value returned: %d\n", pr_err 56 drivers/misc/ti-st/st_core.c pr_err("tty unavailable to perform write"); pr_err 75 drivers/misc/ti-st/st_core.c pr_err("tty unavailable to perform write"); pr_err 98 drivers/misc/ti-st/st_core.c pr_err("chnl_id %d not registered, no data to send?", pr_err 113 drivers/misc/ti-st/st_core.c pr_err(" proto stack %d's ->recv failed", chnl_id); pr_err 118 drivers/misc/ti-st/st_core.c pr_err(" proto stack %d's ->recv null", chnl_id); pr_err 169 drivers/misc/ti-st/st_core.c pr_err("Data length is too large len %d room %d", len, pr_err 239 drivers/misc/ti-st/st_core.c pr_err(" received null from TTY "); pr_err 347 drivers/misc/ti-st/st_core.c pr_err("chip/interface misbehavior: " pr_err 357 drivers/misc/ti-st/st_core.c pr_err("out of memory: dropping\n"); pr_err 424 drivers/misc/ti-st/st_core.c pr_err("ST LL is illegal state(%ld)," pr_err 433 drivers/misc/ti-st/st_core.c pr_err("ST LL is illegal state(%ld)," pr_err 525 drivers/misc/ti-st/st_core.c pr_err("gdata/new_proto/recv or reg_complete_cb not ready"); pr_err 530 drivers/misc/ti-st/st_core.c pr_err("chnl_id %d not supported", new_proto->chnl_id); pr_err 535 drivers/misc/ti-st/st_core.c pr_err("chnl_id %d already registered", new_proto->chnl_id); pr_err 572 drivers/misc/ti-st/st_core.c pr_err(" KIM failure complete callback "); pr_err 600 drivers/misc/ti-st/st_core.c pr_err(" proto %d already registered ", pr_err 638 drivers/misc/ti-st/st_core.c pr_err(" chnl_id %d not supported", proto->chnl_id); pr_err 645 drivers/misc/ti-st/st_core.c pr_err(" chnl_id %d not registered", proto->chnl_id); pr_err 686 drivers/misc/ti-st/st_core.c pr_err("data/tty unavailable to perform write"); pr_err 752 drivers/misc/ti-st/st_core.c pr_err("%d not un-registered", i); pr_err 847 drivers/misc/ti-st/st_core.c pr_err("error registering %d line discipline %ld", pr_err 855 drivers/misc/ti-st/st_core.c pr_err("memory allocation failed"); pr_err 858 drivers/misc/ti-st/st_core.c pr_err("unable to un-register ldisc %ld", err); pr_err 874 drivers/misc/ti-st/st_core.c pr_err("error during st_ll initialization(%ld)", err); pr_err 878 drivers/misc/ti-st/st_core.c pr_err("unable to un-register ldisc"); pr_err 894 drivers/misc/ti-st/st_core.c pr_err("error during deinit of ST LL %ld", err); pr_err 905 drivers/misc/ti-st/st_core.c pr_err("unable to un-register ldisc %ld", err); pr_err 72 drivers/misc/ti-st/st_kim.c pr_err("no proper response during fw download"); pr_err 73 drivers/misc/ti-st/st_kim.c pr_err("data6 %x", skb->data[5]); pr_err 97 drivers/misc/ti-st/st_kim.c pr_err("Data length is too large len %d room %d", len, pr_err 135 drivers/misc/ti-st/st_kim.c pr_err(" received null from TTY "); pr_err 185 drivers/misc/ti-st/st_kim.c pr_err("can't allocate mem for new packet"); pr_err 208 drivers/misc/ti-st/st_kim.c pr_err("kim: couldn't write 4 bytes"); pr_err 215 drivers/misc/ti-st/st_kim.c pr_err(" waiting for ver info- timed out or received signal"); pr_err 255 drivers/misc/ti-st/st_kim.c pr_err("invalid action after change remote baud command"); pr_err 284 drivers/misc/ti-st/st_kim.c pr_err("kim: failed to read local ver"); pr_err 292 drivers/misc/ti-st/st_kim.c pr_err(" request_firmware failed(errno %ld) for %s", err, pr_err 333 drivers/misc/ti-st/st_kim.c pr_err("Unable to get free " pr_err 344 drivers/misc/ti-st/st_kim.c pr_err("Timeout while waiting for free " pr_err 371 drivers/misc/ti-st/st_kim.c pr_err("Number of bytes written to uart " pr_err 384 drivers/misc/ti-st/st_kim.c pr_err("response timeout/signaled during fw download "); pr_err 477 drivers/misc/ti-st/st_kim.c pr_err("ldisc installation timeout"); pr_err 487 drivers/misc/ti-st/st_kim.c pr_err("download firmware failed"); pr_err 533 drivers/misc/ti-st/st_kim.c pr_err(" timed out waiting for ldisc to be un-installed"); pr_err 704 drivers/misc/ti-st/st_kim.c pr_err("no mem to allocate"); pr_err 711 drivers/misc/ti-st/st_kim.c pr_err(" ST core init failed"); pr_err 722 drivers/misc/ti-st/st_kim.c pr_err(" gpio %d request failed ", kim_gdata->nshutdown); pr_err 729 drivers/misc/ti-st/st_kim.c pr_err(" unable to configure gpio %d", kim_gdata->nshutdown); pr_err 740 drivers/misc/ti-st/st_kim.c pr_err("failed to create sysfs entries"); pr_err 34 drivers/misc/ti-st/st_ll.c pr_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND" pr_err 60 drivers/misc/ti-st/st_ll.c pr_err("duplicate wake_ind while waiting for Wake ack"); pr_err 64 drivers/misc/ti-st/st_ll.c pr_err("duplicate wake_ind already AWAKE"); pr_err 68 drivers/misc/ti-st/st_ll.c pr_err("duplicate wake_ind"); pr_err 106 drivers/misc/ti-st/st_ll.c pr_err(" Chip already AWAKE "); pr_err 127 drivers/misc/ti-st/st_ll.c pr_err("sleep ack rcvd: host shouldn't"); pr_err 138 drivers/misc/ti-st/st_ll.c pr_err(" unknown input/state "); pr_err 1459 drivers/misc/vmw_balloon.c pr_err("failed to initialize vmci doorbell\n"); pr_err 1462 drivers/misc/vmw_balloon.c pr_err("failed to send guest ID to the host\n"); pr_err 55 drivers/misc/vmw_vmci/vmci_driver.c pr_err("Failed to initialize VMCIEvent (result=%d)\n", pr_err 1493 drivers/misc/xilinx_sdfec.c pr_err("%s Unabled to register SDFEC driver", __func__); pr_err 430 drivers/mmc/core/block.c pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n", pr_err 587 drivers/mmc/core/block.c pr_err("%s: ioctl_do_sanitize() failed. err = %d", pr_err 1061 drivers/mmc/core/block.c pr_err("%s: Locking boot partition ro until next power on failed: %d\n", pr_err 1077 drivers/mmc/core/block.c pr_err("%s: unknown driver specific operation\n", pr_err 1810 drivers/mmc/core/block.c pr_err("%s: recovery failed!\n", req->rq_disk->disk_name); pr_err 2543 drivers/mmc/core/block.c pr_err("%s: could not add character device\n", rpmb_name); pr_err 2762 drivers/mmc/core/block.c pr_err("FAILED %d\n", err); pr_err 2883 drivers/mmc/core/block.c pr_err("Failed to create mmc completion workqueue"); pr_err 3018 drivers/mmc/core/block.c pr_err("mmcblk: could not register RPMB bus type\n"); pr_err 3023 drivers/mmc/core/block.c pr_err("mmcblk: failed to allocate rpmb chrdev region\n"); pr_err 419 drivers/mmc/core/core.c pr_err("%s: %s: Failed to interrupt sanitize\n", pr_err 957 drivers/mmc/core/core.c pr_err("%s: tuning execution failed: %d\n", pr_err 1705 drivers/mmc/core/core.c pr_err("mmc_erase: group start error %d, " pr_err 1720 drivers/mmc/core/core.c pr_err("mmc_erase: group end error %d, status %#x\n", pr_err 1750 drivers/mmc/core/core.c pr_err("mmc_erase: erase error %d, status %#x\n", pr_err 1775 drivers/mmc/core/core.c pr_err("error %d requesting status %#x\n", pr_err 1785 drivers/mmc/core/core.c pr_err("%s: Card stuck in programming state! %s\n", pr_err 366 drivers/mmc/core/host.c pr_err("%pOF: voltage-ranges empty\n", np); pr_err 378 drivers/mmc/core/host.c pr_err("%pOF: voltage-range #%d is invalid\n", pr_err 112 drivers/mmc/core/mmc.c pr_err("%s: card has unknown MMCA version %d\n", pr_err 146 drivers/mmc/core/mmc.c pr_err("%s: unrecognised CSD structure version %d\n", pr_err 373 drivers/mmc/core/mmc.c pr_err("%s: unrecognised EXT_CSD structure " pr_err 678 drivers/mmc/core/mmc.c pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n", pr_err 1093 drivers/mmc/core/mmc.c pr_err("%s: switch to bus width %d ddr failed\n", pr_err 1161 drivers/mmc/core/mmc.c pr_err("%s: switch to high-speed from hs200 failed, err:%d\n", pr_err 1190 drivers/mmc/core/mmc.c pr_err("%s: switch to bus width for hs400 failed, err:%d\n", pr_err 1203 drivers/mmc/core/mmc.c pr_err("%s: switch to hs400 failed, err:%d\n", pr_err 1222 drivers/mmc/core/mmc.c pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), pr_err 1302 drivers/mmc/core/mmc.c pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), pr_err 1352 drivers/mmc/core/mmc.c pr_err("%s: switch to 8bit bus width failed, err:%d\n", pr_err 1364 drivers/mmc/core/mmc.c pr_err("%s: switch to hs for hs400es failed, err:%d\n", pr_err 1383 drivers/mmc/core/mmc.c pr_err("%s: switch to bus width for hs400es failed, err:%d\n", pr_err 1398 drivers/mmc/core/mmc.c pr_err("%s: switch to hs400es failed, err:%d\n", pr_err 1418 drivers/mmc/core/mmc.c pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), pr_err 1487 drivers/mmc/core/mmc.c pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), pr_err 1858 drivers/mmc/core/mmc.c pr_err("%s: Failed to enable CQE, error %d\n", pr_err 1869 drivers/mmc/core/mmc.c pr_err("%s: Host failed to negotiate down from 3.3V\n", pr_err 1964 drivers/mmc/core/mmc.c pr_err("%s: Power Off Notification timed out, %u\n", pr_err 2128 drivers/mmc/core/mmc.c pr_err("%s: error %d doing aggressive suspend\n", pr_err 2143 drivers/mmc/core/mmc.c pr_err("%s: error %d doing runtime resume\n", pr_err 2259 drivers/mmc/core/mmc.c pr_err("%s: error %d whilst initialising MMC card\n", pr_err 501 drivers/mmc/core/mmc_ops.c pr_err("%s: Card stuck being busy! %s\n", pr_err 731 drivers/mmc/core/mmc_ops.c pr_err("%s: Invalid bus_width %d\n", pr_err 851 drivers/mmc/core/mmc_ops.c pr_err("%s: Get card status fail\n", mmc_hostname(card->host)); pr_err 929 drivers/mmc/core/mmc_ops.c pr_err("%s: Failed to read bkops status: %d\n", pr_err 968 drivers/mmc/core/mmc_ops.c pr_err("%s: cache flush error %d\n", pr_err 174 drivers/mmc/core/sd.c pr_err("%s: unrecognised CSD structure version %d\n", pr_err 198 drivers/mmc/core/sd.c pr_err("%s: unrecognised SCR structure version %d\n", pr_err 225 drivers/mmc/core/sd.c pr_err("%s: invalid bus width\n", mmc_hostname(card->host)); pr_err 1087 drivers/mmc/core/sd.c pr_err("%s: Host failed to negotiate down from 3.3V\n", pr_err 1227 drivers/mmc/core/sd.c pr_err("%s: error %d doing aggressive suspend\n", pr_err 1242 drivers/mmc/core/sd.c pr_err("%s: error %d doing runtime resume\n", pr_err 1333 drivers/mmc/core/sd.c pr_err("%s: error %d whilst initialising SD card\n", pr_err 153 drivers/mmc/core/sd_ops.c pr_err("%s: card never left busy state\n", mmc_hostname(host)); pr_err 116 drivers/mmc/core/sdio.c pr_err("%s: unrecognised CCCR structure version %d\n", pr_err 795 drivers/mmc/core/sdio.c pr_err("%s: Host failed to negotiate down from 3.3V\n", pr_err 1226 drivers/mmc/core/sdio.c pr_err("%s: error %d whilst initialising SDIO card\n", pr_err 131 drivers/mmc/core/sdio_cis.c pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n", pr_err 462 drivers/mmc/host/android-goldfish.c pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end); pr_err 1223 drivers/mmc/host/au1xmmc.c pr_err("au1xmmc: cannot add memory dbdma\n"); pr_err 99 drivers/mmc/host/cqhci.c pr_err("%s: " DRV_NAME ": " f, mmc_hostname(mmc), ## x) pr_err 369 drivers/mmc/host/cqhci.c pr_err("%s: cqhci: CQE stuck on\n", mmc_hostname(mmc)); pr_err 436 drivers/mmc/host/cqhci.c pr_err("%s: sg-len: %d\n", __func__, data->sg_len); pr_err 478 drivers/mmc/host/cqhci.c pr_err("%s: %s: unable to map sg lists, %d\n", pr_err 568 drivers/mmc/host/cqhci.c pr_err("%s: cqhci: not enabled\n", mmc_hostname(mmc)); pr_err 581 drivers/mmc/host/cqhci.c pr_err("%s: cqhci: CQE failed to exit halt state\n", pr_err 594 drivers/mmc/host/cqhci.c pr_err("%s: cqhci: failed to setup tx desc: %d\n", pr_err 845 drivers/mmc/host/cqhci.c pr_err("%s: cqhci: timeout for tag %d\n", pr_err 1144 drivers/mmc/host/cqhci.c pr_err("%s: CQHCI version %u.%02u failed to initialize, error %d\n", pr_err 552 drivers/mmc/host/pxamci.c pr_err("%s: DMA error on %s channel\n", mmc_hostname(host->mmc), pr_err 73 drivers/mmc/host/sdhci-bcm-kona.c pr_err("Error: sd host is stuck in reset!!!\n"); pr_err 332 drivers/mmc/host/sdhci-msm.c pr_err("%s: Failed to set clock at rate %u at timing %d\n", pr_err 784 drivers/mmc/host/sdhci-msm.c pr_err("%s: Unable to get DLL_LOCK/DDR_DLL_LOCK, dll_status: 0x%08x\n", pr_err 903 drivers/mmc/host/sdhci-msm.c pr_err("%s: %s: CDC calibration was not completed\n", pr_err 911 drivers/mmc/host/sdhci-msm.c pr_err("%s: %s: CDC error code %d\n", pr_err 970 drivers/mmc/host/sdhci-msm.c pr_err("%s: %s: CM_DLL_SDC4 calibration was not completed\n", pr_err 1205 drivers/mmc/host/sdhci-msm.c pr_err("%s: Failed to calibrate DLL for hs400 mode (%d)\n", pr_err 1379 drivers/mmc/host/sdhci-msm.c pr_err("%s: PWRCTL_STATUS: 0x%08x | PWRCTL_MASK: 0x%08x | PWRCTL_CTL: 0x%08x\n", pr_err 1413 drivers/mmc/host/sdhci-msm.c pr_err("%s: Timedout clearing (0x%x) pwrctl status register\n", pr_err 81 drivers/mmc/host/sdhci-of-at91.c pr_err("%s: Internal clock never stabilised.\n", pr_err 586 drivers/mmc/host/sdhci-of-esdhc.c pr_err("%s: Internal clock never stabilised.\n", pr_err 699 drivers/mmc/host/sdhci-of-esdhc.c pr_err("%s: Internal clock never stabilised.\n", pr_err 87 drivers/mmc/host/sdhci-pci-o2micro.c pr_err("%s: Card Detect debounce never finished.\n", pr_err 123 drivers/mmc/host/sdhci-pci-o2micro.c pr_err("%s: Internal clock never stabilised.\n", pr_err 281 drivers/mmc/host/sdhci-pci-o2micro.c pr_err("%s: card present detect failed.\n", pr_err 289 drivers/mmc/host/sdhci-pci-o2micro.c pr_err("%s: DLL adjust over max times\n", pr_err 319 drivers/mmc/host/sdhci-pci-o2micro.c pr_err("%s: o2 dll recovery failed\n", pr_err 476 drivers/mmc/host/sdhci-pci-o2micro.c pr_err("%s: enable PCI MSI failed, err=%d\n", pr_err 426 drivers/mmc/host/sdhci-sprd.c pr_err("%s: Switching signalling voltage failed\n", pr_err 440 drivers/mmc/host/sdhci-sprd.c pr_err("%s: failed to select uhs pin state\n", pr_err 452 drivers/mmc/host/sdhci-sprd.c pr_err("%s: failed to select default pin state\n", pr_err 42 drivers/mmc/host/sdhci.c pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x) pr_err 221 drivers/mmc/host/sdhci.c pr_err("%s: Reset 0x%x never completed.\n", pr_err 617 drivers/mmc/host/sdhci.c pr_err("%s: asked for transfer of %u bytes exceeds bounce buffer %u bytes\n", pr_err 1373 drivers/mmc/host/sdhci.c pr_err("%s: Controller never released inhibit bit(s).\n", pr_err 1397 drivers/mmc/host/sdhci.c pr_err("%s: Unsupported response type!\n", pr_err 1650 drivers/mmc/host/sdhci.c pr_err("%s: Internal clock never stabilised.\n", pr_err 1672 drivers/mmc/host/sdhci.c pr_err("%s: PLL clock never stabilised.\n", pr_err 2592 drivers/mmc/host/sdhci.c pr_err("%s: Card removed during transfer!\n", pr_err 2594 drivers/mmc/host/sdhci.c pr_err("%s: Resetting controller.\n", pr_err 2666 drivers/mmc/host/sdhci.c pr_err("%s: bounce buffer is %u bytes but DMA claims to have transferred %u bytes\n", pr_err 2757 drivers/mmc/host/sdhci.c pr_err("%s: Timeout waiting for hardware cmd interrupt.\n", pr_err 2779 drivers/mmc/host/sdhci.c pr_err("%s: Timeout waiting for hardware interrupt.\n", pr_err 2830 drivers/mmc/host/sdhci.c pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n", pr_err 2960 drivers/mmc/host/sdhci.c pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n", pr_err 2976 drivers/mmc/host/sdhci.c pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc), pr_err 3114 drivers/mmc/host/sdhci.c pr_err("%s: Card is consuming too much power!\n", pr_err 3166 drivers/mmc/host/sdhci.c pr_err("%s: Unexpected interrupt 0x%08x.\n", pr_err 3503 drivers/mmc/host/sdhci.c pr_err("%s: Card is consuming too much power!\n", pr_err 3509 drivers/mmc/host/sdhci.c pr_err("%s: CQE: Unexpected interrupt 0x%08x.\n", pr_err 3679 drivers/mmc/host/sdhci.c pr_err("%s: failed to allocate %u bytes for bounce buffer, falling back to single segments\n", pr_err 3758 drivers/mmc/host/sdhci.c pr_err("%s: Unknown controller version (%d). You may experience problems.\n", pr_err 3876 drivers/mmc/host/sdhci.c pr_err("%s: Hardware doesn't specify base clock frequency.\n", pr_err 3930 drivers/mmc/host/sdhci.c pr_err("%s: Hardware doesn't specify timeout clock frequency.\n", pr_err 4162 drivers/mmc/host/sdhci.c pr_err("%s: Hardware doesn't report any support voltages.\n", pr_err 4300 drivers/mmc/host/sdhci.c pr_err("%s: Failed to request IRQ %d: %d\n", pr_err 4307 drivers/mmc/host/sdhci.c pr_err("%s: Failed to register LED device: %d\n", pr_err 4372 drivers/mmc/host/sdhci.c pr_err("%s: Controller removed during " pr_err 632 drivers/mmc/host/tifm_sd.c pr_err("%s : unfinished request detected\n", pr_err 672 drivers/mmc/host/tifm_sd.c pr_err("%s : scatterlist map failed\n", pr_err 684 drivers/mmc/host/tifm_sd.c pr_err("%s : scatterlist map failed\n", pr_err 748 drivers/mmc/host/tifm_sd.c pr_err(" %s : no request to complete?\n", pr_err 787 drivers/mmc/host/tifm_sd.c pr_err("%s : card failed to respond for a long period of time " pr_err 904 drivers/mmc/host/tifm_sd.c pr_err("%s : controller failed to reset\n", pr_err 930 drivers/mmc/host/tifm_sd.c pr_err("%s : card not ready - probe failed on initialization\n", pr_err 377 drivers/mmc/host/tmio_mmc_core.c pr_err("PIO IRQ in DMA mode!\n"); pr_err 695 drivers/mmc/host/tmio_mmc_core.c pr_err("%s: %d byte block unsupported in 4/8 bit mode\n", pr_err 583 drivers/mmc/host/via-sdmmc.c pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc)); pr_err 834 drivers/mmc/host/via-sdmmc.c pr_err("%s: Got command interrupt 0x%x even " pr_err 913 drivers/mmc/host/via-sdmmc.c pr_err("%s: Unexpected interrupt 0x%x\n", pr_err 936 drivers/mmc/host/via-sdmmc.c pr_err("%s: Timeout waiting for hardware interrupt." pr_err 999 drivers/mmc/host/via-sdmmc.c pr_err("%s: Card removed during transfer!\n", pr_err 1181 drivers/mmc/host/via-sdmmc.c pr_err("%s: Controller removed during " pr_err 2429 drivers/mmc/host/vub300.c pr_err("not enough memory for the REQUEST workqueue"); pr_err 2435 drivers/mmc/host/vub300.c pr_err("not enough memory for the IRQPOLL workqueue"); pr_err 2441 drivers/mmc/host/vub300.c pr_err("not enough memory for the EXPIRED workqueue"); pr_err 2447 drivers/mmc/host/vub300.c pr_err("usb_register failed. Error number %d", result); pr_err 192 drivers/mmc/host/wbsd.c pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc)); pr_err 711 drivers/mmc/host/wbsd.c pr_err("%s: Incomplete DMA transfer. " pr_err 1016 drivers/mmc/host/wbsd.c pr_err("%s: Card removed during transfer!\n", pr_err 147 drivers/mtd/chips/cfi_cmdset_0002.c pr_err("%s erase operation failed, status %lx\n", pr_err 150 drivers/mtd/chips/cfi_cmdset_0002.c pr_err("%s program operation failed, status %lx\n", pr_err 153 drivers/mtd/chips/cfi_cmdset_0002.c pr_err("%s buffer program command aborted, status %lx\n", pr_err 156 drivers/mtd/chips/cfi_cmdset_0002.c pr_err("%s sector write protected, status %lx\n", pr_err 1467 drivers/mtd/chips/cfi_cmdset_0002.c pr_err("Waiting for chip to be ready timed out.\n"); pr_err 1980 drivers/mtd/chips/cfi_cmdset_0002.c pr_err("MTD %s(): software timeout, address:0x%.8lx.\n", pr_err 33 drivers/mtd/devices/bcm47xxsflash.c pr_err("Control command failed (timeout)!\n"); pr_err 60 drivers/mtd/devices/bcm47xxsflash.c pr_err("Timeout waiting for flash to be ready!\n"); pr_err 168 drivers/mtd/devices/bcm47xxsflash.c pr_err("Flash rejected dropping CSA\n"); pr_err 191 drivers/mtd/devices/bcm47xxsflash.c pr_err("Timeout reading page 0x%X info buffer\n", page); pr_err 237 drivers/mtd/devices/bcm47xxsflash.c pr_err("Error writing at offset 0x%llX\n", to); pr_err 349 drivers/mtd/devices/bcm47xxsflash.c pr_err("Failed to register MTD device: %d\n", err); pr_err 95 drivers/mtd/devices/block2mtd.c pr_err("erase failed err = %d\n", err); pr_err 262 drivers/mtd/devices/block2mtd.c pr_err("error: cannot open device %s\n", devname); pr_err 268 drivers/mtd/devices/block2mtd.c pr_err("attempting to use an MTD device as a block device\n"); pr_err 273 drivers/mtd/devices/block2mtd.c pr_err("erasesize must be a divisor of device size\n"); pr_err 391 drivers/mtd/devices/block2mtd.c pr_err("parameter too long\n"); pr_err 402 drivers/mtd/devices/block2mtd.c pr_err("too many arguments\n"); pr_err 407 drivers/mtd/devices/block2mtd.c pr_err("no argument\n"); pr_err 413 drivers/mtd/devices/block2mtd.c pr_err("device name too long\n"); pr_err 420 drivers/mtd/devices/block2mtd.c pr_err("illegal erase size\n"); pr_err 103 drivers/mtd/devices/phram.c pr_err("ioremap failed\n"); pr_err 123 drivers/mtd/devices/phram.c pr_err("Failed to register new device\n"); pr_err 199 drivers/mtd/devices/phram.c pr_err(fmt , ## args); \ pr_err 70 drivers/mtd/hyperbus/hyperbus-core.c pr_err("hyperbus: please fill all the necessary fields!\n"); pr_err 466 drivers/mtd/lpddr/lpddr2_nvm.c pr_err("device not recognized\n"); pr_err 130 drivers/mtd/maps/physmap-versatile.c pr_err("error enabling AP VPP\n"); pr_err 136 drivers/mtd/maps/physmap-versatile.c pr_err("error disabling AP VPP\n"); pr_err 159 drivers/mtd/maps/physmap-versatile.c pr_err("error setting CP VPP\n"); pr_err 166 drivers/mtd/maps/physmap-versatile.c pr_err("error setting CP VPP\n"); pr_err 183 drivers/mtd/maps/physmap-versatile.c pr_err("error setting Versatile VPP\n"); pr_err 1180 drivers/mtd/mtdchar.c pr_err("Can't allocate major number %d for MTD\n", pr_err 1992 drivers/mtd/mtdcore.c pr_err("Error registering mtd class or bdi: %d\n", ret); pr_err 41 drivers/mtd/nand/raw/bcm47xxnflash/main.c pr_err("Device not supported\n"); pr_err 45 drivers/mtd/nand/raw/bcm47xxnflash/main.c pr_err("Initialization failed: %d\n", err); pr_err 53 drivers/mtd/nand/raw/bcm47xxnflash/main.c pr_err("Failed to register MTD device: %d\n", err); pr_err 55 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("NFLASH control command not ready!\n"); pr_err 69 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Error on polling\n"); pr_err 77 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Polling timeout!\n"); pr_err 157 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("%s ctl_cmd didn't work!\n", __func__); pr_err 235 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("READID error\n"); pr_err 250 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("READID error\n"); pr_err 262 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("STATUS command error\n"); pr_err 276 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("ERASE1 failed\n"); pr_err 291 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("SEQIN failed\n"); pr_err 296 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("PAGEPROG failed\n"); pr_err 298 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("PAGEPROG not ready\n"); pr_err 301 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Command 0x%X unsupported\n", command); pr_err 317 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Requested invalid id_data: %d\n", pr_err 331 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command); pr_err 348 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command); pr_err 363 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command); pr_err 422 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Could not scan NAND flash: %d\n", err); pr_err 430 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c pr_err("Invalid flash size: 0x%lX\n", chipsize); pr_err 917 drivers/mtd/nand/raw/diskonchip.c pr_err("doc200x_correct_data corrected %d errors\n", pr_err 925 drivers/mtd/nand/raw/diskonchip.c pr_err("suppressing ECC failure\n"); pr_err 1022 drivers/mtd/nand/raw/diskonchip.c pr_err("Read DiskOnChip Media Header once, but can't reread it???\n"); pr_err 1097 drivers/mtd/nand/raw/diskonchip.c pr_err("UnitSizeFactor of 0x%02x is inconsistent with device size. Aborting.\n", mh->UnitSizeFactor); pr_err 1190 drivers/mtd/nand/raw/diskonchip.c pr_err("BlockMultiplierBits=%d is inconsistent with device size. Aborting.\n", mh->BlockMultiplierBits); pr_err 1196 drivers/mtd/nand/raw/diskonchip.c pr_err("Writeable BBTs spanning more than one erase block are not yet supported. FIX ME!\n"); pr_err 1296 drivers/mtd/nand/raw/diskonchip.c pr_err("Multi-floor INFTL devices not yet supported.\n"); pr_err 1424 drivers/mtd/nand/raw/diskonchip.c pr_err("Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", pr_err 1484 drivers/mtd/nand/raw/diskonchip.c pr_err("DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n"); pr_err 1564 drivers/mtd/nand/raw/diskonchip.c pr_err("DiskOnChip: Could not create a RS codec\n"); pr_err 819 drivers/mtd/nand/raw/fsl_ifc_nand.c pr_err("fsl-ifc: Failed to Initialise SRAM\n"); pr_err 115 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); pr_err 825 drivers/mtd/nand/raw/nand_base.c pr_err("Failed to configure data interface to SDR timing mode 0\n"); pr_err 4348 drivers/mtd/nand/raw/nand_base.c pr_err("%s called for a chip which is not in suspended state\n", pr_err 5219 drivers/mtd/nand/raw/nand_base.c pr_err("ECC (step, strength) = (%d, %d) does not fit in OOB", pr_err 5230 drivers/mtd/nand/raw/nand_base.c pr_err("ECC (step, strength) = (%d, %d) not supported on this controller", pr_err 756 drivers/mtd/nand/raw/nand_bbt.c pr_err("No space left to write bad block table\n"); pr_err 1234 drivers/mtd/nand/raw/nand_bbt.c pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n"); pr_err 83 drivers/mtd/nand/raw/nand_bch.c pr_err("ecc unrecoverable error\n"); pr_err 458 drivers/mtd/nand/raw/nand_ecc.c pr_err("%s: uncorrectable ECC error\n", __func__); pr_err 63 drivers/mtd/nand/raw/nand_jedec.c pr_err("Could not find valid JEDEC parameter page; aborting\n"); pr_err 635 drivers/mtd/nand/raw/nand_legacy.c pr_err("->legacy.cmd_ctrl() should be provided\n"); pr_err 458 drivers/mtd/nand/raw/nand_micron.c pr_err("On-die ECC forcefully enabled, not supported\n"); pr_err 465 drivers/mtd/nand/raw/nand_micron.c pr_err("On-die ECC selected but not supported\n"); pr_err 192 drivers/mtd/nand/raw/nand_onfi.c pr_err("ONFI parameter recovery failed, aborting\n"); pr_err 179 drivers/mtd/nand/raw/nandsim.c do { pr_err(" error: " args); } while(0) pr_err 229 drivers/mtd/nand/raw/omap_elm.c pr_err("invalid config bch_type\n"); pr_err 265 drivers/mtd/nand/raw/s3c2410.c pr_err("%d ns is too big for current clock rate %ld\n", pr_err 869 drivers/mtd/nand/raw/sh_flctl.c pr_err("Invalid address !?\n"); pr_err 242 drivers/mtd/parsers/afs.c pr_err("AFS: mtd read failed at 0x%x: %d\n", pr_err 256 drivers/mtd/parsers/afs.c pr_err("AFS: mtd read failed at 0x%x: %d\n", pr_err 275 drivers/mtd/parsers/afs.c pr_err("AFS: bad checksum on v2 image info: %08x\n", crc); pr_err 136 drivers/mtd/parsers/bcm47xxpart.c pr_err("mtd_read error while parsing (offset: 0x%X): %d\n", pr_err 239 drivers/mtd/parsers/bcm47xxpart.c pr_err("mtd_read error while parsing (offset: 0x%X): %d\n", pr_err 263 drivers/mtd/parsers/bcm47xxpart.c pr_err("mtd_read error while reading (offset 0x%X): %d\n", pr_err 105 drivers/mtd/parsers/cmdlinepart.c pr_err("partition has size 0\n"); pr_err 130 drivers/mtd/parsers/cmdlinepart.c pr_err("no closing %c found in partition name\n", delim); pr_err 158 drivers/mtd/parsers/cmdlinepart.c pr_err("no partitions allowed after a fill-up partition\n"); pr_err 228 drivers/mtd/parsers/cmdlinepart.c pr_err("no mtd-id\n"); pr_err 280 drivers/mtd/parsers/cmdlinepart.c pr_err("bad character after partition (%c)\n", *s); pr_err 130 drivers/mtd/parsers/ofpart.c pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n", pr_err 83 drivers/mtd/parsers/parser_imagetag.c pr_err("invalid rootfs address: %*ph\n", pr_err 92 drivers/mtd/parsers/parser_imagetag.c pr_err("invalid kernel address: %*ph\n", pr_err 100 drivers/mtd/parsers/parser_imagetag.c pr_err("invalid kernel length: %*ph\n", pr_err 108 drivers/mtd/parsers/parser_imagetag.c pr_err("invalid total length: %*ph\n", pr_err 38 drivers/mtd/parsers/parser_trx.c pr_err("mtd_read error while parsing (offset: 0x%zX): %d\n", pr_err 68 drivers/mtd/parsers/parser_trx.c pr_err("MTD reading error: %d\n", err); pr_err 259 drivers/mtd/parsers/sharpslpart.c pr_err("sharpslpart: error, read failed at %#llx\n", pr_err 305 drivers/mtd/parsers/sharpslpart.c pr_err("sharpslpart: magic values mismatch\n"); pr_err 318 drivers/mtd/parsers/sharpslpart.c pr_err("sharpslpart: partition sizes mismatch\n"); pr_err 361 drivers/mtd/parsers/sharpslpart.c pr_err("sharpslpart: both partition tables are invalid\n"); pr_err 309 drivers/mtd/rfd_ftl.c pr_err(PREFIX "'%s': unable to write RFD header at 0x%lx\n", pr_err 413 drivers/mtd/spi-nor/spi-nor.c pr_err("error %d reading SR\n", (int) ret); pr_err 442 drivers/mtd/spi-nor/spi-nor.c pr_err("error %d reading FSR\n", ret); pr_err 2729 drivers/mtd/spi-nor/spi-nor.c pr_err("spi-nor: please fill all the necessary fields!\n"); pr_err 279 drivers/mtd/tests/mtd_nandecctest.c pr_err("not ok - %s-%zd\n", pr_err 91 drivers/mtd/tests/mtd_test.c pr_err("error: read failed at %#llx\n", addr); pr_err 106 drivers/mtd/tests/mtd_test.c pr_err("error: write failed at %#llx\n", addr); pr_err 118 drivers/mtd/tests/nandbiterrs.c pr_err("error: write_oob failed (%d)\n", err); pr_err 145 drivers/mtd/tests/nandbiterrs.c pr_err("error: read failed at %#llx\n", (long long)offset); pr_err 163 drivers/mtd/tests/nandbiterrs.c pr_err("Error: page offset %u, expected %02x, got %02x\n", pr_err 194 drivers/mtd/tests/nandbiterrs.c pr_err("biterror: Failed to find a '1' bit\n"); pr_err 225 drivers/mtd/tests/nandbiterrs.c pr_err("After %d biterrors per subpage, read reported error %d\n", pr_err 233 drivers/mtd/tests/nandbiterrs.c pr_err("ECC failure, read data is incorrect despite read success\n"); pr_err 339 drivers/mtd/tests/nandbiterrs.c pr_err("error: cannot get MTD device\n"); pr_err 75 drivers/mtd/tests/oobtest.c pr_err("error: writeoob failed at %#llx\n", pr_err 77 drivers/mtd/tests/oobtest.c pr_err("error: use_len %d, use_offset %d\n", pr_err 188 drivers/mtd/tests/oobtest.c pr_err("error: readoob failed at %#llx\n", pr_err 198 drivers/mtd/tests/oobtest.c pr_err("error: verify failed at %#llx\n", pr_err 202 drivers/mtd/tests/oobtest.c pr_err("error: too many errors\n"); pr_err 225 drivers/mtd/tests/oobtest.c pr_err("error: readoob failed at %#llx\n", pr_err 244 drivers/mtd/tests/oobtest.c pr_err("error: verify failed at %#llx\n", pr_err 248 drivers/mtd/tests/oobtest.c pr_err("error: too many errors\n"); pr_err 287 drivers/mtd/tests/oobtest.c pr_err("error: readoob failed at %#llx\n", pr_err 298 drivers/mtd/tests/oobtest.c pr_err("error: verify failed at %#llx\n", pr_err 302 drivers/mtd/tests/oobtest.c pr_err("error: too many errors\n"); pr_err 358 drivers/mtd/tests/oobtest.c pr_err("error: cannot get MTD device\n"); pr_err 511 drivers/mtd/tests/oobtest.c pr_err("error: can write past end of OOB\n"); pr_err 534 drivers/mtd/tests/oobtest.c pr_err("error: can read past end of OOB\n"); pr_err 558 drivers/mtd/tests/oobtest.c pr_err("error: wrote past end of device\n"); pr_err 581 drivers/mtd/tests/oobtest.c pr_err("error: read past end of device\n"); pr_err 605 drivers/mtd/tests/oobtest.c pr_err("error: wrote past end of device\n"); pr_err 628 drivers/mtd/tests/oobtest.c pr_err("error: read past end of device\n"); pr_err 700 drivers/mtd/tests/oobtest.c pr_err("error: verify failed at %#llx\n", pr_err 704 drivers/mtd/tests/oobtest.c pr_err("error: too many errors\n"); pr_err 79 drivers/mtd/tests/pagetest.c pr_err("error: verify failed at %#llx\n", pr_err 102 drivers/mtd/tests/pagetest.c pr_err("error: verify failed at %#llx\n", pr_err 180 drivers/mtd/tests/pagetest.c pr_err("verify failed!\n"); pr_err 227 drivers/mtd/tests/pagetest.c pr_err("verify failed!\n"); pr_err 257 drivers/mtd/tests/pagetest.c pr_err("verify failed!\n"); pr_err 306 drivers/mtd/tests/pagetest.c pr_err("verifying all 0xff failed at %d\n", pr_err 339 drivers/mtd/tests/pagetest.c pr_err("error: cannot get MTD device\n"); pr_err 63 drivers/mtd/tests/readtest.c pr_err("error: read oob failed at " pr_err 131 drivers/mtd/tests/readtest.c pr_err("error: Cannot get MTD device\n"); pr_err 55 drivers/mtd/tests/speedtest.c pr_err("error %d while erasing EB %d, blocks %d\n", pr_err 197 drivers/mtd/tests/speedtest.c pr_err("error: cannot get MTD device\n"); pr_err 156 drivers/mtd/tests/stresstest.c pr_err("error: cannot get MTD device\n"); pr_err 179 drivers/mtd/tests/stresstest.c pr_err("error: need at least 2 eraseblocks\n"); pr_err 52 drivers/mtd/tests/subpagetest.c pr_err("error: write failed at %#llx\n", pr_err 55 drivers/mtd/tests/subpagetest.c pr_err(" write size: %#x\n", subpgsize); pr_err 56 drivers/mtd/tests/subpagetest.c pr_err(" written: %#zx\n", written); pr_err 66 drivers/mtd/tests/subpagetest.c pr_err("error: write failed at %#llx\n", pr_err 69 drivers/mtd/tests/subpagetest.c pr_err(" write size: %#x\n", subpgsize); pr_err 70 drivers/mtd/tests/subpagetest.c pr_err(" written: %#zx\n", written); pr_err 90 drivers/mtd/tests/subpagetest.c pr_err("error: write failed at %#llx\n", pr_err 93 drivers/mtd/tests/subpagetest.c pr_err(" write size: %#x\n", pr_err 95 drivers/mtd/tests/subpagetest.c pr_err(" written: %#08zx\n", pr_err 132 drivers/mtd/tests/subpagetest.c pr_err("error: read failed at %#llx\n", pr_err 138 drivers/mtd/tests/subpagetest.c pr_err("error: verify failed at %#llx\n", pr_err 159 drivers/mtd/tests/subpagetest.c pr_err("error: read failed at %#llx\n", pr_err 196 drivers/mtd/tests/subpagetest.c pr_err("error: read failed at " pr_err 202 drivers/mtd/tests/subpagetest.c pr_err("error: verify failed at %#llx\n", pr_err 229 drivers/mtd/tests/subpagetest.c pr_err("error: read failed at " pr_err 235 drivers/mtd/tests/subpagetest.c pr_err("error: verify 0xff failed at " pr_err 288 drivers/mtd/tests/subpagetest.c pr_err("error: cannot get MTD device\n"); pr_err 104 drivers/mtd/tests/torturetest.c pr_err("single bit flip occurred at EB %d " pr_err 107 drivers/mtd/tests/torturetest.c pr_err("error %d while reading EB %d, " pr_err 113 drivers/mtd/tests/torturetest.c pr_err("failed to read %zd bytes from EB %d, " pr_err 120 drivers/mtd/tests/torturetest.c pr_err("read wrong data from EB %d\n", ebnum); pr_err 156 drivers/mtd/tests/torturetest.c pr_err("error %d while writing EB %d, written %zd" pr_err 196 drivers/mtd/tests/torturetest.c pr_err("error: cannot get MTD device\n"); pr_err 208 drivers/mtd/tests/torturetest.c pr_err("error: invalid pgcnt value %d\n", pgcnt); pr_err 904 drivers/mtd/ubi/attach.c pr_err("hexdump of PEB %d offset %d, length %d", pr_err 1223 drivers/mtd/ubi/attach.c pr_err("Corrupted PEBs are:"); pr_err 119 drivers/mtd/ubi/block.c pr_err("UBI: block: parameter \"%s\" is too long, max. is %d\n", pr_err 400 drivers/mtd/ubi/block.c pr_err("UBI: block: alloc_disk failed\n"); pr_err 636 drivers/mtd/ubi/block.c pr_err( pr_err 647 drivers/mtd/ubi/block.c pr_err( pr_err 825 drivers/mtd/ubi/build.c pr_err("ubi: mtd%d is already attached to ubi%d\n", pr_err 840 drivers/mtd/ubi/build.c pr_err("ubi: refuse attaching mtd%d - it is already emulated on top of UBI\n", pr_err 851 drivers/mtd/ubi/build.c pr_err("ubi: refuse attaching mtd%d - MLC NAND is not supported\n", pr_err 862 drivers/mtd/ubi/build.c pr_err("ubi: only %d UBI devices may be created\n", pr_err 872 drivers/mtd/ubi/build.c pr_err("ubi: ubi%i already exists\n", ubi_num); pr_err 1180 drivers/mtd/ubi/build.c pr_err("UBI error: too many MTD devices, maximum is %d\n", pr_err 1192 drivers/mtd/ubi/build.c pr_err("UBI error: cannot register device\n"); pr_err 1219 drivers/mtd/ubi/build.c pr_err("UBI error: cannot open mtd %s, error %d\n", pr_err 1232 drivers/mtd/ubi/build.c pr_err("UBI error: cannot attach mtd%d\n", pr_err 1256 drivers/mtd/ubi/build.c pr_err("UBI error: block: cannot initialize, error %d\n", err); pr_err 1279 drivers/mtd/ubi/build.c pr_err("UBI error: cannot initialize UBI, error %d\n", err); pr_err 1317 drivers/mtd/ubi/build.c pr_err("UBI error: incorrect bytes count: \"%s\"\n", str); pr_err 1335 drivers/mtd/ubi/build.c pr_err("UBI error: incorrect bytes count: \"%s\"\n", str); pr_err 1362 drivers/mtd/ubi/build.c pr_err("UBI error: too many parameters, max. is %d\n", pr_err 1369 drivers/mtd/ubi/build.c pr_err("UBI error: parameter \"%s\" is too long, max. is %d\n", pr_err 1389 drivers/mtd/ubi/build.c pr_err("UBI error: too many arguments at \"%s\"\n", val); pr_err 1409 drivers/mtd/ubi/build.c pr_err("UBI error: bad value for max_beb_per1024 parameter: %s", pr_err 1420 drivers/mtd/ubi/build.c pr_err("UBI error: bad value for ubi_num parameter: %s", pr_err 53 drivers/mtd/ubi/debug.c pr_err("Erase counter header dump:\n"); pr_err 54 drivers/mtd/ubi/debug.c pr_err("\tmagic %#08x\n", be32_to_cpu(ec_hdr->magic)); pr_err 55 drivers/mtd/ubi/debug.c pr_err("\tversion %d\n", (int)ec_hdr->version); pr_err 56 drivers/mtd/ubi/debug.c pr_err("\tec %llu\n", (long long)be64_to_cpu(ec_hdr->ec)); pr_err 57 drivers/mtd/ubi/debug.c pr_err("\tvid_hdr_offset %d\n", be32_to_cpu(ec_hdr->vid_hdr_offset)); pr_err 58 drivers/mtd/ubi/debug.c pr_err("\tdata_offset %d\n", be32_to_cpu(ec_hdr->data_offset)); pr_err 59 drivers/mtd/ubi/debug.c pr_err("\timage_seq %d\n", be32_to_cpu(ec_hdr->image_seq)); pr_err 60 drivers/mtd/ubi/debug.c pr_err("\thdr_crc %#08x\n", be32_to_cpu(ec_hdr->hdr_crc)); pr_err 61 drivers/mtd/ubi/debug.c pr_err("erase counter header hexdump:\n"); pr_err 72 drivers/mtd/ubi/debug.c pr_err("Volume identifier header dump:\n"); pr_err 73 drivers/mtd/ubi/debug.c pr_err("\tmagic %08x\n", be32_to_cpu(vid_hdr->magic)); pr_err 74 drivers/mtd/ubi/debug.c pr_err("\tversion %d\n", (int)vid_hdr->version); pr_err 75 drivers/mtd/ubi/debug.c pr_err("\tvol_type %d\n", (int)vid_hdr->vol_type); pr_err 76 drivers/mtd/ubi/debug.c pr_err("\tcopy_flag %d\n", (int)vid_hdr->copy_flag); pr_err 77 drivers/mtd/ubi/debug.c pr_err("\tcompat %d\n", (int)vid_hdr->compat); pr_err 78 drivers/mtd/ubi/debug.c pr_err("\tvol_id %d\n", be32_to_cpu(vid_hdr->vol_id)); pr_err 79 drivers/mtd/ubi/debug.c pr_err("\tlnum %d\n", be32_to_cpu(vid_hdr->lnum)); pr_err 80 drivers/mtd/ubi/debug.c pr_err("\tdata_size %d\n", be32_to_cpu(vid_hdr->data_size)); pr_err 81 drivers/mtd/ubi/debug.c pr_err("\tused_ebs %d\n", be32_to_cpu(vid_hdr->used_ebs)); pr_err 82 drivers/mtd/ubi/debug.c pr_err("\tdata_pad %d\n", be32_to_cpu(vid_hdr->data_pad)); pr_err 83 drivers/mtd/ubi/debug.c pr_err("\tsqnum %llu\n", pr_err 85 drivers/mtd/ubi/debug.c pr_err("\thdr_crc %08x\n", be32_to_cpu(vid_hdr->hdr_crc)); pr_err 86 drivers/mtd/ubi/debug.c pr_err("Volume identifier header hexdump:\n"); pr_err 97 drivers/mtd/ubi/debug.c pr_err("Volume information dump:\n"); pr_err 98 drivers/mtd/ubi/debug.c pr_err("\tvol_id %d\n", vol->vol_id); pr_err 99 drivers/mtd/ubi/debug.c pr_err("\treserved_pebs %d\n", vol->reserved_pebs); pr_err 100 drivers/mtd/ubi/debug.c pr_err("\talignment %d\n", vol->alignment); pr_err 101 drivers/mtd/ubi/debug.c pr_err("\tdata_pad %d\n", vol->data_pad); pr_err 102 drivers/mtd/ubi/debug.c pr_err("\tvol_type %d\n", vol->vol_type); pr_err 103 drivers/mtd/ubi/debug.c pr_err("\tname_len %d\n", vol->name_len); pr_err 104 drivers/mtd/ubi/debug.c pr_err("\tusable_leb_size %d\n", vol->usable_leb_size); pr_err 105 drivers/mtd/ubi/debug.c pr_err("\tused_ebs %d\n", vol->used_ebs); pr_err 106 drivers/mtd/ubi/debug.c pr_err("\tused_bytes %lld\n", vol->used_bytes); pr_err 107 drivers/mtd/ubi/debug.c pr_err("\tlast_eb_bytes %d\n", vol->last_eb_bytes); pr_err 108 drivers/mtd/ubi/debug.c pr_err("\tcorrupted %d\n", vol->corrupted); pr_err 109 drivers/mtd/ubi/debug.c pr_err("\tupd_marker %d\n", vol->upd_marker); pr_err 113 drivers/mtd/ubi/debug.c pr_err("\tname %s\n", vol->name); pr_err 115 drivers/mtd/ubi/debug.c pr_err("\t1st 5 characters of name: %c%c%c%c%c\n", pr_err 130 drivers/mtd/ubi/debug.c pr_err("Volume table record %d dump:\n", idx); pr_err 131 drivers/mtd/ubi/debug.c pr_err("\treserved_pebs %d\n", be32_to_cpu(r->reserved_pebs)); pr_err 132 drivers/mtd/ubi/debug.c pr_err("\talignment %d\n", be32_to_cpu(r->alignment)); pr_err 133 drivers/mtd/ubi/debug.c pr_err("\tdata_pad %d\n", be32_to_cpu(r->data_pad)); pr_err 134 drivers/mtd/ubi/debug.c pr_err("\tvol_type %d\n", (int)r->vol_type); pr_err 135 drivers/mtd/ubi/debug.c pr_err("\tupd_marker %d\n", (int)r->upd_marker); pr_err 136 drivers/mtd/ubi/debug.c pr_err("\tname_len %d\n", name_len); pr_err 139 drivers/mtd/ubi/debug.c pr_err("\tname NULL\n"); pr_err 145 drivers/mtd/ubi/debug.c pr_err("\tname %s\n", &r->name[0]); pr_err 147 drivers/mtd/ubi/debug.c pr_err("\t1st 5 characters of name: %c%c%c%c%c\n", pr_err 151 drivers/mtd/ubi/debug.c pr_err("\tcrc %#08x\n", be32_to_cpu(r->crc)); pr_err 160 drivers/mtd/ubi/debug.c pr_err("Volume attaching information dump:\n"); pr_err 161 drivers/mtd/ubi/debug.c pr_err("\tvol_id %d\n", av->vol_id); pr_err 162 drivers/mtd/ubi/debug.c pr_err("\thighest_lnum %d\n", av->highest_lnum); pr_err 163 drivers/mtd/ubi/debug.c pr_err("\tleb_count %d\n", av->leb_count); pr_err 164 drivers/mtd/ubi/debug.c pr_err("\tcompat %d\n", av->compat); pr_err 165 drivers/mtd/ubi/debug.c pr_err("\tvol_type %d\n", av->vol_type); pr_err 166 drivers/mtd/ubi/debug.c pr_err("\tused_ebs %d\n", av->used_ebs); pr_err 167 drivers/mtd/ubi/debug.c pr_err("\tlast_data_size %d\n", av->last_data_size); pr_err 168 drivers/mtd/ubi/debug.c pr_err("\tdata_pad %d\n", av->data_pad); pr_err 178 drivers/mtd/ubi/debug.c pr_err("eraseblock attaching information dump:\n"); pr_err 179 drivers/mtd/ubi/debug.c pr_err("\tec %d\n", aeb->ec); pr_err 180 drivers/mtd/ubi/debug.c pr_err("\tpnum %d\n", aeb->pnum); pr_err 182 drivers/mtd/ubi/debug.c pr_err("\tlnum %d\n", aeb->lnum); pr_err 183 drivers/mtd/ubi/debug.c pr_err("\tscrub %d\n", aeb->scrub); pr_err 184 drivers/mtd/ubi/debug.c pr_err("\tsqnum %llu\n", aeb->sqnum); pr_err 196 drivers/mtd/ubi/debug.c pr_err("Volume creation request dump:\n"); pr_err 197 drivers/mtd/ubi/debug.c pr_err("\tvol_id %d\n", req->vol_id); pr_err 198 drivers/mtd/ubi/debug.c pr_err("\talignment %d\n", req->alignment); pr_err 199 drivers/mtd/ubi/debug.c pr_err("\tbytes %lld\n", (long long)req->bytes); pr_err 200 drivers/mtd/ubi/debug.c pr_err("\tvol_type %d\n", req->vol_type); pr_err 201 drivers/mtd/ubi/debug.c pr_err("\tname_len %d\n", req->name_len); pr_err 205 drivers/mtd/ubi/debug.c pr_err("\t1st 16 characters of name: %s\n", nm); pr_err 229 drivers/mtd/ubi/debug.c pr_err("UBI error: cannot create \"ubi\" debugfs directory, error %d\n", pr_err 31 drivers/mtd/ubi/gluebi.c pr_err("gluebi (pid %d): %s: " fmt "\n", \ pr_err 188 drivers/mtd/ubi/misc.c pr_err(UBI_NAME_STR "%d error: %ps: %pV\n", pr_err 105 drivers/mux/core.c pr_err("muxchipX failed to get a device id\n"); pr_err 78 drivers/net/arcnet/arc-rimi.c pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n"); pr_err 83 drivers/net/arcnet/arc-rimi.c pr_err("You need to specify your card's station ID!\n"); pr_err 365 drivers/net/arcnet/arc-rimi.c pr_err("Too many arguments\n"); pr_err 149 drivers/net/arcnet/com20020-pci.c pr_err("IO region %xh-%xh already allocated.\n", pr_err 178 drivers/net/arcnet/com20020-pci.c pr_err("IO region %xh-%xh already allocated\n", pr_err 217 drivers/net/arcnet/com20020-pci.c pr_err("IO address %Xh is empty!\n", ioaddr); pr_err 365 drivers/net/arcnet/com90io.c pr_err("Too many arguments\n"); pr_err 695 drivers/net/arcnet/com90xx.c pr_err("Too many arguments\n"); pr_err 1676 drivers/net/bonding/bond_alb.c pr_err("Failed to build slave-array for TLB mode.\n"); pr_err 4024 drivers/net/bonding/bond_main.c pr_err("Failed to build slave-array.\n"); pr_err 4431 drivers/net/bonding/bond_main.c pr_err("Error: Invalid bonding mode \"%s\"\n", mode); pr_err 4448 drivers/net/bonding/bond_main.c pr_err("Error: Invalid xmit_hash_policy \"%s\"\n", pr_err 4465 drivers/net/bonding/bond_main.c pr_err("Error: Invalid lacp rate \"%s\"\n", pr_err 4478 drivers/net/bonding/bond_main.c pr_err("Error: Invalid ad_select \"%s\"\n", ad_select); pr_err 4629 drivers/net/bonding/bond_main.c pr_err("arp_validate requires arp_interval\n"); pr_err 4637 drivers/net/bonding/bond_main.c pr_err("Error: invalid arp_validate \"%s\"\n", pr_err 4651 drivers/net/bonding/bond_main.c pr_err("Error: invalid arp_all_targets_value \"%s\"\n", pr_err 4693 drivers/net/bonding/bond_main.c pr_err("Error: Invalid primary_reselect \"%s\"\n", pr_err 4707 drivers/net/bonding/bond_main.c pr_err("Error: invalid fail_over_mac \"%s\"\n", pr_err 4723 drivers/net/bonding/bond_main.c pr_err("Error: No ad_actor_sys_prio default value"); pr_err 4731 drivers/net/bonding/bond_main.c pr_err("Error: No ad_user_port_key default value"); pr_err 4739 drivers/net/bonding/bond_main.c pr_err("Error: No tlb_dynamic_lb default value"); pr_err 4850 drivers/net/bonding/bond_main.c pr_err("%s: eek! can't alloc netdev!\n", name); pr_err 113 drivers/net/bonding/bond_sysfs.c pr_err("unable to delete non-existent %s\n", ifname); pr_err 126 drivers/net/bonding/bond_sysfs.c pr_err("no command found in bonding_masters - use +ifname or -ifname\n"); pr_err 794 drivers/net/bonding/bond_sysfs.c pr_err("network device named %s already exists in sysfs\n", pr_err 506 drivers/net/caif/caif_hsi.c pr_err("Invalid descriptor. %x %x\n", desc->header, pr_err 520 drivers/net/caif/caif_hsi.c pr_err("Invalid payload len: %d, ignored.\n", xfer_sz); pr_err 1409 drivers/net/caif/caif_hsi.c pr_err("%s: failed to get the cfhsi_ops\n", __func__); pr_err 1416 drivers/net/caif/caif_hsi.c pr_err("%s: failed to get the cfhsi_ops\n", __func__); pr_err 398 drivers/net/caif/caif_serial.c pr_err("cannot register CAIF ldisc=%d err=%d\n", N_CAIF, pr_err 337 drivers/net/can/cc770/cc770_isa.c pr_err("insufficient parameters supplied\n"); pr_err 248 drivers/net/can/pch_can.c pr_err("%s:IF1 BUSY Flag is set forever.\n", __func__); pr_err 275 drivers/net/can/sja1000/sja1000_isa.c pr_err("%s: insufficient parameters supplied\n", pr_err 894 drivers/net/can/usb/peak_usb/pcan_usb_core.c pr_err("%s: didn't find device id. 0x%x in devices list\n", pr_err 933 drivers/net/can/usb/peak_usb/pcan_usb_core.c pr_err("%s: usb_register failed (err %d)\n", pr_err 964 drivers/net/can/usb/peak_usb/pcan_usb_core.c pr_err("%s: failed to stop all can devices (err %d)\n", pr_err 181 drivers/net/can/usb/peak_usb/pcan_usb_pro.c pr_err("%s: %s(): unknown data type %02Xh (%d)\n", pr_err 2459 drivers/net/dsa/b53/b53_common.c pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n", pr_err 719 drivers/net/dsa/bcm_sf2.c pr_err("%s: failed to software reset switch\n", __func__); pr_err 1132 drivers/net/dsa/bcm_sf2.c pr_err("unable to find register: %s\n", reg_names[i]); pr_err 1140 drivers/net/dsa/bcm_sf2.c pr_err("unable to software reset switch: %d\n", ret); pr_err 1148 drivers/net/dsa/bcm_sf2.c pr_err("failed to register MDIO bus\n"); pr_err 1156 drivers/net/dsa/bcm_sf2.c pr_err("failed to reset CFP\n"); pr_err 1166 drivers/net/dsa/bcm_sf2.c pr_err("failed to request switch_0 IRQ\n"); pr_err 1173 drivers/net/dsa/bcm_sf2.c pr_err("failed to request switch_1 IRQ\n"); pr_err 244 drivers/net/dsa/bcm_sf2_cfp.c pr_err("Policer entry at %d failed\n", rule_index); pr_err 254 drivers/net/dsa/bcm_sf2_cfp.c pr_err("Meter entry at %d failed\n", rule_index); pr_err 442 drivers/net/dsa/bcm_sf2_cfp.c pr_err("TCAM entry at addr %d failed\n", rule_index); pr_err 727 drivers/net/dsa/bcm_sf2_cfp.c pr_err("TCAM entry at addr %d failed\n", rule_index[0]); pr_err 787 drivers/net/dsa/bcm_sf2_cfp.c pr_err("TCAM entry at addr %d failed\n", rule_index[1]); pr_err 309 drivers/net/dsa/mv88e6xxx/hwtstamp.c pr_err("failed to get the receive time stamp\n"); pr_err 321 drivers/net/dsa/mv88e6xxx/hwtstamp.c pr_err("failed to clear the receive status\n"); pr_err 434 drivers/net/dsa/qca8k.c pr_err("Can't set PAD_CTRL on port %d\n", port); pr_err 463 drivers/net/dsa/qca8k.c pr_err("xMII mode %d not supported\n", mode); pr_err 647 drivers/net/dsa/qca8k.c pr_err("port 0 is not the CPU port\n"); pr_err 666 drivers/net/dsa/qca8k.c pr_err("Can't find phy-mode for master device\n"); pr_err 26 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Start bit (%d) expected to be larger than end (%d)\n", pr_err 30 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Field %d-%d too large for 64 bits!\n", pr_err 33 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", pr_err 48 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Start bit (%d) expected to be larger than end (%d)\n", pr_err 51 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Field %d-%d too large for 64 bits!\n", pr_err 65 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Start bit (%d) expected to be larger than end (%d)\n", pr_err 69 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Field %d-%d too large for 64 bits!\n", pr_err 72 drivers/net/dsa/sja1105/sja1105_static_config.c pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", pr_err 540 drivers/net/ethernet/3com/3c509.c pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", pr_err 833 drivers/net/ethernet/3com/3c509.c pr_err("%s: Infinite loop in interrupt, status %4.4x.\n", pr_err 1414 drivers/net/ethernet/3com/3c509.c pr_err("No I/O port available for 3c509 activation.\n"); pr_err 1151 drivers/net/ethernet/3com/3c515.c pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n", pr_err 1247 drivers/net/ethernet/3com/3c515.c pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n", pr_err 937 drivers/net/ethernet/3com/3c59x.c pr_err("vortex_eisa_remove called for Compaq device!\n"); pr_err 1294 drivers/net/ethernet/3com/3c59x.c pr_err("*** EEPROM MAC address is invalid.\n"); pr_err 1480 drivers/net/ethernet/3com/3c59x.c pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); pr_err 1508 drivers/net/ethernet/3com/3c59x.c pr_err("%s: command 0x%04x did not complete! Status=0x%x\n", pr_err 1727 drivers/net/ethernet/3com/3c59x.c pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); pr_err 1776 drivers/net/ethernet/3com/3c59x.c pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval); pr_err 1885 drivers/net/ethernet/3com/3c59x.c pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", pr_err 1888 drivers/net/ethernet/3com/3c59x.c pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n", pr_err 1895 drivers/net/ethernet/3com/3c59x.c pr_err("%s: Transmitter encountered 16 collisions --" pr_err 1898 drivers/net/ethernet/3com/3c59x.c pr_err("%s: Interrupt posted but not delivered --" pr_err 1945 drivers/net/ethernet/3com/3c59x.c pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status); pr_err 1953 drivers/net/ethernet/3com/3c59x.c pr_err("%s: Transmit error, Tx status register %2.2x.\n", pr_err 1956 drivers/net/ethernet/3com/3c59x.c pr_err("Probably a duplex mismatch. See " pr_err 2003 drivers/net/ethernet/3com/3c59x.c pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n", pr_err 2011 drivers/net/ethernet/3com/3c59x.c pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); pr_err 2796 drivers/net/ethernet/3com/3c59x.c pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", pr_err 2800 drivers/net/ethernet/3com/3c59x.c pr_err(" Transmit list %8.8x vs. %p.\n", pr_err 2812 drivers/net/ethernet/3com/3c59x.c pr_err(" %d: @%p length %8.8x status %8.8x\n", pr_err 3260 drivers/net/ethernet/3com/3c59x.c pr_err("vortex_remove_one called for Compaq device!\n"); pr_err 2514 drivers/net/ethernet/3com/typhoon.c pr_err("%s: %s\n", pci_name(pdev), err_msg); pr_err 593 drivers/net/ethernet/8390/lib8390.c pr_err("%s: bogus last_tx_buffer %d, tx1=%d\n", pr_err 606 drivers/net/ethernet/8390/lib8390.c pr_err("%s: bogus last_tx_buffer %d, tx2=%d\n", pr_err 627 drivers/net/ethernet/8390/mac8390.c pr_err("%s: unable to get IRQ %d\n", dev->name, dev->irq); pr_err 527 drivers/net/ethernet/altera/altera_tse_main.c pr_err("%s: invalid dev pointer\n", __func__); pr_err 99 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("dma address has more bits that the device supports\n"); pr_err 118 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory allocation failed\n"); pr_err 140 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory allocation failed\n"); pr_err 163 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory allocation failed\n"); pr_err 184 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("aenq handlers pointer is NULL\n"); pr_err 204 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Completion context is NULL\n"); pr_err 209 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("command id is larger than the queue size. cmd_id: %u queue size %d\n", pr_err 215 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Completion context is occupied\n"); pr_err 293 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory allocation failed\n"); pr_err 364 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory allocation failed\n"); pr_err 390 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("bounce buffer memory allocation failed\n"); pr_err 448 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory allocation failed\n"); pr_err 469 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("comp_ctx is NULL. Changing the admin queue running state\n"); pr_err 524 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("admin command failed[%u]\n", comp_status); pr_err 564 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Wait for completion (polling) timeout\n"); pr_err 579 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Command was aborted\n"); pr_err 628 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to set LLQ configurations: %d\n", ret); pr_err 649 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid header location control, supported: 0x%x\n", pr_err 664 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid desc_stride_ctrl, supported: 0x%x\n", pr_err 669 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Default llq stride ctrl is not supported, performing fallback, default: 0x%x, supported: 0x%x, used: 0x%x\n", pr_err 692 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid entry_size_ctrl, supported: 0x%x\n", pr_err 697 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Default llq ring entry size is not supported, performing fallback, default: 0x%x, supported: 0x%x, used: 0x%x\n", pr_err 705 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("illegal entry size %d\n", pr_err 729 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid descs_num_before_header, supported: 0x%x\n", pr_err 734 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Default llq num descs before header is not supported, performing fallback, default: 0x%x, supported: 0x%x, used: 0x%x\n", pr_err 744 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Cannot set LLQ configuration: %d\n", rc); pr_err 771 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("The ena device sent a completion but the driver didn't receive a MSI-X interrupt (cmd %d), autopolling mode is %s\n", pr_err 778 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("The ena device doesn't send a completion for the admin cmd %d status %d\n", pr_err 839 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("reading reg failed for timeout. expected: req id[%hu] offset[%hu] actual: req id[%hu] offset[%hu]\n", pr_err 847 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Read failure: wrong offset provided\n"); pr_err 906 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("failed to destroy io sq error: %d\n", ret); pr_err 955 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reg read timeout occurred\n"); pr_err 1013 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 1030 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to submit get_feature command %d error: %d\n", pr_err 1144 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("indirect table size doesn't fit. requested size: %d while min is:%d and max %d\n", pr_err 1237 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 1248 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to create IO SQ. error: %d\n", ret); pr_err 1304 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Illegal intr_delay_resolution provided. Going to use default 1 usec resolution\n"); pr_err 1343 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to submit command [%ld]\n", pr_err 1352 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to process command. ret = %d\n", ret); pr_err 1383 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 1393 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to create IO CQ. error: %d\n", ret); pr_err 1422 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid queue number %d but the max is %d\n", qid, pr_err 1487 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to destroy IO CQ. error: %d\n", ret); pr_err 1554 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to config AENQ ret: %d\n", ret); pr_err 1565 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reg read timeout occurred\n"); pr_err 1575 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("DMA width illegal value: %d\n", width); pr_err 1599 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reg read timeout occurred\n"); pr_err 1624 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("ENA ctrl version is lower than the minimal ctrl version the driver supports\n"); pr_err 1745 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reg read timeout occurred\n"); pr_err 1750 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Device isn't ready, abort com init\n"); pr_err 1826 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Qid (%d) is bigger than max num of queues (%d)\n", pr_err 1885 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Qid (%d) is bigger than max num of queues (%d)\n", qid, pr_err 2081 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reg read32 timeout occurred\n"); pr_err 2086 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Device isn't ready, can't reset device\n"); pr_err 2093 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid timeout value\n"); pr_err 2109 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reset indication didn't turn on\n"); pr_err 2117 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Reset indication didn't turn off\n"); pr_err 2154 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to get stats. error: %d\n", ret); pr_err 2201 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to set mtu %d. error: %d\n", mtu, ret); pr_err 2215 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to get offload capabilities %d\n", ret); pr_err 2247 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Func hash %d isn't supported by device, abort\n", pr_err 2265 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 2277 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to set hash function %d. error: %d\n", pr_err 2307 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Flow hash function %d isn't supported\n", func); pr_err 2315 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("key len (%hu) doesn't equal the supported size (%zu)\n", pr_err 2328 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid hash function (%d)\n", func); pr_err 2424 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 2435 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to set hash input. error: %d\n", ret); pr_err 2485 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("hash control doesn't support all the desire configuration. proto %x supported %x selected %x\n", pr_err 2511 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Invalid proto num (%u)\n", proto); pr_err 2523 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("proto %d doesn't support the required fields %x. supports only: %x\n", pr_err 2571 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to convert host indirection table to device table\n"); pr_err 2588 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 2602 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to set indirect table. error: %d\n", ret); pr_err 2759 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 2767 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("memory address set failed\n"); pr_err 2780 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to set host attributes: %d\n", ret); pr_err 2797 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Illegal interrupt delay granularity value\n"); pr_err 2837 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("Failed to get interrupt moderation admin cmd. rc: %d\n", pr_err 2886 drivers/net/ethernet/amazon/ena/ena_com.c pr_err("the size of the LLQ entry is smaller than needed\n"); pr_err 87 drivers/net/ethernet/amazon/ena/ena_eth_com.c pr_err("Error: trying to send more packets than tx burst allows\n"); pr_err 131 drivers/net/ethernet/amazon/ena/ena_eth_com.c pr_err("trying to write header larger than llq entry can accommodate\n"); pr_err 136 drivers/net/ethernet/amazon/ena/ena_eth_com.c pr_err("bounce buffer is NULL\n"); pr_err 154 drivers/net/ethernet/amazon/ena/ena_eth_com.c pr_err("bounce buffer is NULL\n"); pr_err 392 drivers/net/ethernet/amazon/ena/ena_eth_com.c pr_err("header size is too large %d max header: %d\n", pr_err 536 drivers/net/ethernet/amazon/ena/ena_eth_com.c pr_err("Too many RX cdescs (%d) > MAX(%d)\n", nb_hw_desc, pr_err 268 drivers/net/ethernet/amazon/ena/ena_eth_com.h pr_err("Invalid req id %d\n", cdesc->req_id); pr_err 2413 drivers/net/ethernet/amazon/ena/ena_netdev.c pr_err("Cannot allocate host info\n"); pr_err 2442 drivers/net/ethernet/amazon/ena/ena_netdev.c pr_err("Cannot set host attributes\n"); pr_err 2470 drivers/net/ethernet/amazon/ena/ena_netdev.c pr_err("Cannot allocate debug area\n"); pr_err 3794 drivers/net/ethernet/amazon/ena/ena_netdev.c pr_err("Failed to create workqueue\n"); pr_err 234 drivers/net/ethernet/amd/a2065.c pr_err("unopened after %d ticks, csr0=%04x\n", i, ll->rdp); pr_err 808 drivers/net/ethernet/amd/au1000_eth.c pr_err("rx_error(s):"); pr_err 545 drivers/net/ethernet/amd/nmclan_cs.c pr_err("reset failed, card removed?\n"); pr_err 592 drivers/net/ethernet/amd/nmclan_cs.c pr_err("ADDRCHG timeout, card removed?\n"); pr_err 1546 drivers/net/ethernet/amd/pcnet32.c pr_err("failed to enable device -- err=%d\n", err); pr_err 1554 drivers/net/ethernet/amd/pcnet32.c pr_err("card has no PCI IO resources, aborting\n"); pr_err 1562 drivers/net/ethernet/amd/pcnet32.c pr_err("architecture does not support 32bit PCI busmaster DMA\n"); pr_err 1567 drivers/net/ethernet/amd/pcnet32.c pr_err("io address range already allocated\n"); pr_err 1626 drivers/net/ethernet/amd/pcnet32.c pr_err("No access methods\n"); pr_err 1847 drivers/net/ethernet/amd/pcnet32.c pr_err("Consistent memory allocation failed\n"); pr_err 2466 drivers/net/ethernet/amd/pcnet32.c pr_err("%s: transmit timed out, status %4.4x, resetting\n", pr_err 25 drivers/net/ethernet/aquantia/atlantic/aq_hw_utils.h #define aq_pr_err(...) pr_err(AQ_CFG_DRV_NAME ": " __VA_ARGS__) pr_err 247 drivers/net/ethernet/aquantia/atlantic/aq_main.c pr_err("Failed to create workqueue\n"); pr_err 52 drivers/net/ethernet/arc/emac_rockchip.c pr_err("speed %u not supported\n", speed); pr_err 58 drivers/net/ethernet/arc/emac_rockchip.c pr_err("unable to apply speed %u to grf (%d)\n", speed, err); pr_err 2183 drivers/net/ethernet/broadcom/b44.c pr_err("Invalid MAC address found in EEPROM\n"); pr_err 2559 drivers/net/ethernet/broadcom/bnx2.c pr_err("fw sync timeout, reset code = %x\n", msg_data); pr_err 3722 drivers/net/ethernet/broadcom/bnx2.c pr_err("Can't load firmware file \"%s\"\n", mips_fw_file); pr_err 3728 drivers/net/ethernet/broadcom/bnx2.c pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file); pr_err 3739 drivers/net/ethernet/broadcom/bnx2.c pr_err("Firmware file \"%s\" is invalid\n", mips_fw_file); pr_err 3746 drivers/net/ethernet/broadcom/bnx2.c pr_err("Firmware file \"%s\" is invalid\n", rv2p_fw_file); pr_err 4857 drivers/net/ethernet/broadcom/bnx2.c pr_err("Chip reset did not complete\n"); pr_err 4865 drivers/net/ethernet/broadcom/bnx2.c pr_err("Chip not in correct endian mode\n"); pr_err 113 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h pr_err("[%s:%d(%s)]" fmt, \ pr_err 122 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h pr_err("[%s:%d(%s)]" fmt, \ pr_err 129 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__) pr_err 13216 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c pr_err("PCI device error, probably due to fan failure, aborting\n"); pr_err 13733 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c pr_err("Unknown board_type (%d), aborting\n", chip_id); pr_err 14487 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c pr_err("Cannot create workqueue\n"); pr_err 14492 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c pr_err("Cannot create iov workqueue\n"); pr_err 14499 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c pr_err("Cannot register driver\n"); pr_err 478 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Bad type %d\n", __func__, ulp_type); pr_err 483 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Type %d has already been registered\n", pr_err 521 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Bad type %d\n", __func__, ulp_type); pr_err 527 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Type %d has not been registered\n", pr_err 536 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Type %d still has devices registered\n", pr_err 573 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Bad type %d\n", __func__, ulp_type); pr_err 578 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Driver with type %d has not been registered\n", pr_err 584 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Type %d has already been registered to this device\n", pr_err 615 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: Bad type %d\n", __func__, ulp_type); pr_err 627 drivers/net/ethernet/broadcom/cnic.c pr_err("%s: device not registered to this ulp type %d\n", pr_err 330 drivers/net/ethernet/broadcom/genet/bcmmii.c pr_err("could not attach to PHY\n"); pr_err 340 drivers/net/ethernet/broadcom/genet/bcmmii.c pr_err("could not attach to PHY\n"); pr_err 3857 drivers/net/ethernet/brocade/bna/bnad.c pr_err("bna: PCI driver registration failed err=%d\n", err); pr_err 27 drivers/net/ethernet/brocade/bna/cna.h pr_err("SM Assertion failure: %s: %d: event = %d\n", \ pr_err 3339 drivers/net/ethernet/cadence/macb_main.c pr_err("GEM doesn't support hardware ptp.\n"); pr_err 363 drivers/net/ethernet/cadence/macb_ptp.c pr_err("ptp clock register failed: %ld\n", pr_err 368 drivers/net/ethernet/cadence/macb_ptp.c pr_err("ptp clock register failed\n"); pr_err 660 drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c pr_err("netdev notifier registration failed\n"); pr_err 671 drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c pr_err("netdev notifier unregister failed\n"); pr_err 686 drivers/net/ethernet/cavium/liquidio/octeon_device.c pr_err("%s: Unknown PCI Device: 0x%x\n", pr_err 459 drivers/net/ethernet/cavium/liquidio/octeon_network.h pr_err("%s: pg_info->page NULL\n", __func__); pr_err 466 drivers/net/ethernet/cavium/liquidio/octeon_network.h pr_err("%s: ERROR it should be already available\n", pr_err 116 drivers/net/ethernet/cavium/thunder/thunder_xcv.c pr_err("XCV init not done, probe may have failed\n"); pr_err 994 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_err("%s: cannot find PCI device memory base address\n", pr_err 1004 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_err("%s: unable to obtain 64-bit DMA for " pr_err 1011 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_err("%s: no usable DMA configuration\n", pci_name(pdev)); pr_err 1017 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_err("%s: cannot obtain PCI resources\n", pci_name(pdev)); pr_err 1045 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_err("%s: cannot map device registers\n", pr_err 1154 drivers/net/ethernet/chelsio/cxgb/cxgb2.c pr_err("%s: could not register any net devices\n", pr_err 78 drivers/net/ethernet/chelsio/cxgb/espi.c pr_err("%s: TRICN write timed out\n", adapter->name); pr_err 88 drivers/net/ethernet/chelsio/cxgb/espi.c pr_err("%s: ESPI clock not ready\n", adapter->name); pr_err 1096 drivers/net/ethernet/chelsio/cxgb/sge.c pr_err("%s: unexpected offload packet, cmd %u\n", pr_err 1681 drivers/net/ethernet/chelsio/cxgb/sge.c pr_err("%s: Tx ring full while queue awake!\n", pr_err 578 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: reading EEPROM address 0x%x failed\n", pr_err 1061 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: SGE initialization failed\n", pr_err 1067 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: ESPI initialization failed\n", pr_err 1074 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: TP initialization failed\n", pr_err 1094 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: PHY %d initialization failed\n", pr_err 1101 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: MAC %d initialization failed\n", pr_err 1113 drivers/net/ethernet/chelsio/cxgb/subr.c pr_err("%s: could not read MAC address from VPD ROM\n", pr_err 50 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("Invalid tpi read from MAC, breaking loop.\n"); pr_err 227 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("sleep %d us\n",ib[i].data); pr_err 243 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("No bist address: 0x%x\n", address); pr_err 253 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("Still in bist read: 0x%x\n", result); pr_err 255 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("bist read error: 0x%x\n", result); pr_err 270 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("No bist address: 0x%x\n", address); pr_err 273 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("Suspicious write out of range value: 0x%x\n", value); pr_err 283 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("Still in bist write: 0x%x\n", result); pr_err 285 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("bist write error: 0x%x\n", result); pr_err 308 drivers/net/ethernet/chelsio/cxgb/vsc7326.c pr_err("Result: 0x%x BIST error in ram %d, column: 0x%04x\n", pr_err 3218 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c pr_err("cannot initialize work queue\n"); pr_err 711 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("Unexpected SMT_WRITE_RPL status %u for entry %u\n", pr_err 722 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("Unexpected L2T_WRITE_RPL status %u for entry %u\n", pr_err 733 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("Unexpected RTE_WRITE_RPL status %u for entry %u\n", pr_err 753 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received clientless CPL command 0x%x\n", pr_err 771 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received clientless CPL command 0x%x\n", pr_err 789 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received clientless CPL command 0x%x\n", pr_err 816 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received clientless CPL command 0x%x\n", pr_err 910 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received clientless CPL command 0x%x\n", pr_err 956 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received clientless CPL command 0x%x\n", pr_err 992 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: received bad CPL command 0x%x\n", dev->name, *skb->data); pr_err 1010 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("T3C: handler registration for opcode %x failed\n", pr_err 1030 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: CPL message (opcode %u) had unknown TID %u\n", pr_err 1095 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: cannot allocate skb!\n", __func__); pr_err 1132 drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c pr_err("%s: couldn't allocate new l2t entry!\n", __func__); pr_err 1348 drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c pr_err("%s: IPv6 filter requires 2 indices. IPv4 filter already present at %d. Please remove IPv4 filter first.\n", pr_err 1662 drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c pr_err("%s: Invalid NAT mode: %d\n", pr_err 408 drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c pr_err("iscsi ppod region not contiguous: EDRAM start 0x%x " pr_err 624 drivers/net/ethernet/cirrus/cs89x0.c pr_err("**** Full / half duplex auto-negotiation timed out ****\n"); pr_err 857 drivers/net/ethernet/cirrus/cs89x0.c pr_err("can't get an interrupt\n"); pr_err 864 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", pr_err 879 drivers/net/ethernet/cirrus/cs89x0.c pr_err("request_irq(%d) failed\n", dev->irq); pr_err 890 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: cannot get %dK memory for DMA\n", pr_err 901 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: not usable as DMA buffer\n", dev->name); pr_err 906 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: cannot get dma channel %d\n", pr_err 957 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: EEPROM is configured for unavailable media\n", pr_err 1016 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: no media detected\n", dev->name); pr_err 1021 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: no network cable attached to configured media\n", pr_err 1530 drivers/net/ethernet/cirrus/cs89x0.c pr_err("invalid ISA interrupt number %d\n", i); pr_err 1618 drivers/net/ethernet/cirrus/cs89x0.c pr_err("%s: bad signature 0x%x\n", pr_err 1802 drivers/net/ethernet/cirrus/cs89x0.c pr_err("Module autoprobing not allowed\n"); pr_err 1803 drivers/net/ethernet/cirrus/cs89x0.c pr_err("Append io=0xNNN\n"); pr_err 1813 drivers/net/ethernet/cirrus/cs89x0.c pr_err("dma size must be either 16K or 64K, not %dK\n", pr_err 2021 drivers/net/ethernet/dec/tulip/de2104x.c pr_err("invalid irq (%d) for pci dev %s\n", pr_err 2030 drivers/net/ethernet/dec/tulip/de2104x.c pr_err("no MMIO resource for pci dev %s\n", pci_name(pdev)); pr_err 2035 drivers/net/ethernet/dec/tulip/de2104x.c pr_err("MMIO resource (%llx) too small on pci dev %s\n", pr_err 2045 drivers/net/ethernet/dec/tulip/de2104x.c pr_err("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n", pr_err 2057 drivers/net/ethernet/dec/tulip/de2104x.c pr_err("Cannot reset MAC, pci dev %s\n", pci_name(pdev)); pr_err 154 drivers/net/ethernet/dec/tulip/dmfe.c pr_err("%s %lx\n", \ pr_err 404 drivers/net/ethernet/dec/tulip/dmfe.c pr_err("I/O base is zero\n"); pr_err 410 drivers/net/ethernet/dec/tulip/dmfe.c pr_err("Allocated I/O size too small\n"); pr_err 425 drivers/net/ethernet/dec/tulip/dmfe.c pr_err("Failed to request PCI regions\n"); pr_err 684 drivers/net/ethernet/dec/tulip/dmfe.c pr_err("big packet = %d\n", (u16)skb->len); pr_err 697 drivers/net/ethernet/dec/tulip/dmfe.c pr_err("No Tx resource %ld\n", db->tx_queue_cnt); pr_err 1330 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("skipping LMC card\n"); pr_err 1336 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("skipping SBE T3E3 port\n"); pr_err 1405 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("Cannot enable tulip board #%d, aborting\n", board_idx); pr_err 1418 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n", pr_err 1855 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("pci_enable_wake failed (%d)\n", rc); pr_err 1881 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("pci_enable_device failed in resume\n"); pr_err 1888 drivers/net/ethernet/dec/tulip/tulip_core.c pr_err("request_irq failed in resume\n"); pr_err 83 drivers/net/ethernet/dec/tulip/uli526x.c pr_err("%s %lx\n", (msg), (long) (value)); \ pr_err 87 drivers/net/ethernet/dec/tulip/uli526x.c pr_err("Change Speed to %sMhz %s duplex\n", \ pr_err 306 drivers/net/ethernet/dec/tulip/uli526x.c pr_err("I/O base is zero\n"); pr_err 312 drivers/net/ethernet/dec/tulip/uli526x.c pr_err("Allocated I/O size too small\n"); pr_err 319 drivers/net/ethernet/dec/tulip/uli526x.c pr_err("Failed to request PCI regions\n"); pr_err 217 drivers/net/ethernet/dec/tulip/xircom_cb.c pr_err("%s: failed to allocate io-region\n", __func__); pr_err 268 drivers/net/ethernet/dec/tulip/xircom_cb.c pr_err("%s: netdevice registration failed\n", __func__); pr_err 1150 drivers/net/ethernet/dec/tulip/xircom_cb.c pr_err("Major transmit error status %x\n", status); pr_err 507 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: Buffer pool is not properly initialized! Missing size or initial number of buffers\n", pr_err 520 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: bman_new_pool() failed\n", pr_err 539 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: pool seeding failed\n", __func__); pr_err 820 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: Error %d allocating CGR ID\n", pr_err 849 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: Error %d creating CGR with ID %d\n", pr_err 1182 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: fman_port_config failed\n", __func__); pr_err 1188 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: fman_port_cfg_buf_prefix_content failed\n", pr_err 1195 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: fm_port_init failed\n", __func__); pr_err 1236 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: fman_port_config failed\n", __func__); pr_err 1242 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: fman_port_cfg_buf_prefix_content failed\n", pr_err 1249 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("%s: fm_port_init failed\n", __func__); pr_err 2720 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("Error %d allocating CGR ID\n", err); pr_err 2741 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("Error %d creating ingress CGR with ID %d\n", pr_err 3025 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c pr_err("Error, platform_driver_register() = %d\n", err); pr_err 842 drivers/net/ethernet/freescale/fec_mpc52xx.c pr_err("Error while parsing device node resource\n"); pr_err 846 drivers/net/ethernet/freescale/fec_mpc52xx.c pr_err("invalid resource size (%lx < %x), check mpc52xx_devices.c\n", pr_err 884 drivers/net/ethernet/freescale/fec_mpc52xx.c pr_err("Can not init SDMA tasks\n"); pr_err 1193 drivers/net/ethernet/freescale/fman/fman.c pr_err("Unsupported FManv3 version\n"); pr_err 1199 drivers/net/ethernet/freescale/fman/fman.c pr_err("Unsupported FMan version\n"); pr_err 2945 drivers/net/ethernet/freescale/fman/fman.c pr_err("Error, platform_driver_register() = %d\n", err); pr_err 556 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("1G MAC driver supports 1G or lower speeds\n"); pr_err 560 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Ethernet MAC Must have a valid MAC Address\n"); pr_err 565 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("packetAlignmentPadding can't be > than %d\n", pr_err 575 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Inter packet gap can't be greater than %d\n", pr_err 581 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("maxRetransmission can't be greater than %d\n", pr_err 587 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("collisionWindow can't be greater than %d\n", pr_err 595 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("uninitialized exception_cb\n"); pr_err 599 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("uninitialized event_cb\n"); pr_err 1075 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Could not compute hash bucket\n"); pr_err 1186 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Could not compute hash bucket\n"); pr_err 1353 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Undefined exception\n"); pr_err 1364 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Exception valid for 1588 only\n"); pr_err 1382 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Undefined exception\n"); pr_err 1403 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Can't reset MAC!\n"); pr_err 1420 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("DTSEC version doesn't support this i/f mode\n"); pr_err 1454 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("Setting max frame length failed\n"); pr_err 1463 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("MC hash table is failed\n"); pr_err 1470 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("UC hash table is failed\n"); pr_err 1549 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("TBI PHY node is not available\n"); pr_err 1555 drivers/net/ethernet/freescale/fman/fman_dtsec.c pr_err("of_phy_find_device (TBI PHY) failed\n"); pr_err 429 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Writing Action Register failed\n"); pr_err 497 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Requested Scheme does not exist\n"); pr_err 501 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Cannot bind port to an invalid scheme\n"); pr_err 510 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Reading Action Register failed\n"); pr_err 519 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Writing Action Register failed\n"); pr_err 547 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Requested Scheme does not exist\n"); pr_err 551 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("The requested Scheme is already used\n"); pr_err 632 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Writing scheme registers failed\n"); pr_err 724 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Base FQID must be between 1 and 2^24-1\n"); pr_err 728 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Hash size must be power of two\n"); pr_err 735 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("The maximum number of available Schemes has been exceeded\n"); pr_err 743 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Requested Scheme does not exist\n"); pr_err 747 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("The requested Scheme is already used\n"); pr_err 771 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Scheme setup failed\n"); pr_err 778 drivers/net/ethernet/freescale/fman/fman_keygen.c pr_err("Binding port to schemes failed\n"); pr_err 600 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("Ethernet MAC must have a valid MAC address\n"); pr_err 604 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("Uninitialized exception handler\n"); pr_err 925 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("Unicast Address\n"); pr_err 1020 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("Undefined exception\n"); pr_err 1054 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("mEMAC reset failed\n"); pr_err 1113 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("settings Mac max frame length is FAILED\n"); pr_err 1120 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("allocation hash table is FAILED\n"); pr_err 1127 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("allocation hash table is FAILED\n"); pr_err 1200 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("PCS PHY node is not available\n"); pr_err 1207 drivers/net/ethernet/freescale/fman/fman_memac.c pr_err("of_phy_find_device (PCS PHY) failed\n"); pr_err 77 drivers/net/ethernet/freescale/fman/fman_muram.c pr_err("%s(): MURAM pool create failed\n", __func__); pr_err 83 drivers/net/ethernet/freescale/fman/fman_muram.c pr_err("%s(): MURAM ioremap failed\n", __func__); pr_err 90 drivers/net/ethernet/freescale/fman/fman_muram.c pr_err("%s(): MURAM pool add failed\n", __func__); pr_err 705 drivers/net/ethernet/freescale/fman/fman_port.c pr_err("Timeout stopping HW Parser\n"); pr_err 719 drivers/net/ethernet/freescale/fman/fman_port.c pr_err("Timeout starting HW Parser\n"); pr_err 1911 drivers/net/ethernet/freescale/fman/fman_port.c pr_err("Error, platform_driver_register() = %d\n", err); pr_err 273 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("10G MAC driver only support 10G speed\n"); pr_err 277 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("Ethernet 10G MAC Must have valid MAC Address\n"); pr_err 281 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("uninitialized exception_cb\n"); pr_err 285 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("uninitialized event_cb\n"); pr_err 546 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("Unicast Address\n"); pr_err 677 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("Undefined exception\n"); pr_err 699 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("Can't reset MAC!\n"); pr_err 721 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("TGEC version doesn't support this i/f mode\n"); pr_err 729 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("Setting max frame length FAILED\n"); pr_err 749 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("allocation hash table is FAILED\n"); pr_err 756 drivers/net/ethernet/freescale/fman/fman_tgec.c pr_err("allocation hash table is FAILED\n"); pr_err 674 drivers/net/ethernet/freescale/gianfar.c pr_err("Cannot do alloc_etherdev, aborting\n"); pr_err 697 drivers/net/ethernet/freescale/gianfar.c pr_err("num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n", pr_err 699 drivers/net/ethernet/freescale/gianfar.c pr_err("Cannot do alloc_etherdev, aborting\n"); pr_err 704 drivers/net/ethernet/freescale/gianfar.c pr_err("num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n", pr_err 706 drivers/net/ethernet/freescale/gianfar.c pr_err("Cannot do alloc_etherdev, aborting\n"); pr_err 735 drivers/net/ethernet/freescale/gianfar.c pr_err("Device model property missing, aborting\n"); pr_err 3413 drivers/net/ethernet/freescale/gianfar.c pr_err("%s: Cannot register net device, aborting\n", dev->name); pr_err 281 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not get SNUM\n"); pr_err 292 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory\n"); pr_err 1394 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Preamble length must be between 3 and 7 inclusive\n"); pr_err 1504 drivers/net/ethernet/freescale/ucc_geth.c pr_err("ucc_num out of range\n"); pr_err 1533 drivers/net/ethernet/freescale/ucc_geth.c pr_err("ucc_num out of range\n"); pr_err 2080 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Bad memory partition value\n"); pr_err 2090 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Rx BD ring length must be multiple of 4, no smaller than 8\n"); pr_err 2099 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Tx BD ring length must be no smaller than 2\n"); pr_err 2108 drivers/net/ethernet/freescale/ucc_geth.c pr_err("max_rx_buf_length must be non-zero multiple of 128\n"); pr_err 2115 drivers/net/ethernet/freescale/ucc_geth.c pr_err("number of tx queues too large\n"); pr_err 2122 drivers/net/ethernet/freescale/ucc_geth.c pr_err("number of rx queues too large\n"); pr_err 2130 drivers/net/ethernet/freescale/ucc_geth.c pr_err("VLAN priority table entry must not be larger than number of Rx queues\n"); pr_err 2139 drivers/net/ethernet/freescale/ucc_geth.c pr_err("IP priority table entry must not be larger than number of Rx queues\n"); pr_err 2146 drivers/net/ethernet/freescale/ucc_geth.c pr_err("If cam mode is chosen, must supply cam ptr\n"); pr_err 2154 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Number of station addresses greater than 1 not allowed in extended parsing mode\n"); pr_err 2168 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Failed to init uccf\n"); pr_err 2183 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Failed to ioremap regs\n"); pr_err 2234 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate memory for Tx bd rings\n"); pr_err 2252 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Could not allocate tx_skbuff\n"); pr_err 2311 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate memory for Rx bd rings\n"); pr_err 2325 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Could not allocate rx_skbuff\n"); pr_err 2393 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Bad number of Rx threads value\n"); pr_err 2415 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Bad number of Tx threads value\n"); pr_err 2463 drivers/net/ethernet/freescale/ucc_geth.c pr_err("IPGIFG initialization parameter too large\n"); pr_err 2479 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Half Duplex initialization parameter too large\n"); pr_err 2516 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_tx_glbl_pram\n"); pr_err 2536 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_thread_data_tx\n"); pr_err 2563 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_send_q_mem_reg\n"); pr_err 2603 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_scheduler\n"); pr_err 2650 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_tx_fw_statistics_pram\n"); pr_err 2687 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_rx_glbl_pram\n"); pr_err 2706 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_thread_data_rx\n"); pr_err 2727 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_rx_fw_statistics_pram\n"); pr_err 2747 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_rx_irq_coalescing_tbl\n"); pr_err 2813 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_rx_bd_qs_tbl\n"); pr_err 2887 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Null Extended Filtering Chain Pointer\n"); pr_err 2898 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_exf_glbl_param\n"); pr_err 2943 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate memory for p_UccInitEnetParamShadows\n"); pr_err 2976 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Invalid largest External Lookup Key Size\n"); pr_err 3001 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not fill p_init_enet_param_shadow\n"); pr_err 3015 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not fill p_init_enet_param_shadow\n"); pr_err 3023 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not fill Rx bds with buffers\n"); pr_err 3032 drivers/net/ethernet/freescale/ucc_geth.c pr_err("Can not allocate DPRAM memory for p_init_enet_pram\n"); pr_err 3183 drivers/net/ethernet/freescale/ucc_geth.c pr_err("%d: ERROR!!! skb - 0x%08x\n", pr_err 3732 drivers/net/ethernet/freescale/ucc_geth.c pr_err("[%d] Missing additional data!\n", ucc_num); pr_err 3743 drivers/net/ethernet/freescale/ucc_geth.c pr_err("invalid rx-clock-name property\n"); pr_err 3751 drivers/net/ethernet/freescale/ucc_geth.c pr_err("missing rx-clock-name property\n"); pr_err 3755 drivers/net/ethernet/freescale/ucc_geth.c pr_err("invalid rx-clock property\n"); pr_err 3766 drivers/net/ethernet/freescale/ucc_geth.c pr_err("invalid tx-clock-name property\n"); pr_err 3772 drivers/net/ethernet/freescale/ucc_geth.c pr_err("missing tx-clock-name property\n"); pr_err 3776 drivers/net/ethernet/freescale/ucc_geth.c pr_err("invalid tx-clock property\n"); pr_err 3904 drivers/net/ethernet/freescale/ucc_geth.c pr_err("%s: Cannot register net device, aborting\n", pr_err 47 drivers/net/ethernet/hisilicon/hns/hnae.h pr_err("Assertion failed! %s, %s, %s, line %d\n", \ pr_err 733 drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c pr_err("hns_ae_get_stats NULL handle or data pointer!\n"); pr_err 3079 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c pr_err("fwnode is neither OF or ACPI type\n"); pr_err 3085 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c pr_err("couldn't find platform device for node\n"); pr_err 120 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c pr_err("sfp_led_opt mac_dev is null!\n"); pr_err 157 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c pr_err("cpld_led_set mac_cb is null!\n"); pr_err 178 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c pr_err("cpld_led_reset mac_cb is null!\n"); pr_err 159 drivers/net/ethernet/hisilicon/hns3/hnae3.c pr_err("client %s does not exist!\n", client->name); pr_err 638 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Critical receive error for QP %d. Resetting port.\n", pr_err 789 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("HW/SW queues out of sync\n"); pr_err 823 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Bad send completion status=0x%04X\n", pr_err 830 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Resetting port\n"); pr_err 931 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("QP aff_err: entry=0x%llx, token=0x%x\n", pr_err 950 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Resetting port\n"); pr_err 978 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb0\n"); pr_err 1063 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb4\n"); pr_err 1114 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Failed sensing port speed\n"); pr_err 1123 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Failed setting port speed\n"); pr_err 1408 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Generating SMRS failed\n"); pr_err 1461 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("create_eq failed (eq)\n"); pr_err 1469 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("create_cq failed (cq_recv)\n"); pr_err 1477 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("create_cq failed (cq_send)\n"); pr_err 1489 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for ehea_qp_init_attr\n"); pr_err 1514 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("create_qp failed\n"); pr_err 1691 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("%sregistering bc address failed (tagged)\n", pr_err 1703 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("%sregistering bc address failed (vlan)\n", pr_err 1726 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb0\n"); pr_err 1777 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed %sabling promiscuous mode\n", pr_err 1792 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb7\n"); pr_err 1854 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed deregistering mcast MAC\n"); pr_err 1911 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed registering mcast MAC\n"); pr_err 2096 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb1\n"); pr_err 2104 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_port failed\n"); pr_err 2115 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("modify_ehea_port failed\n"); pr_err 2134 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb1\n"); pr_err 2142 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_port failed\n"); pr_err 2153 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("modify_ehea_port failed\n"); pr_err 2178 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_qp failed (1)\n"); pr_err 2187 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("modify_ehea_qp failed (1)\n"); pr_err 2194 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_qp failed (2)\n"); pr_err 2203 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("modify_ehea_qp failed (2)\n"); pr_err 2210 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_qp failed (3)\n"); pr_err 2219 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("modify_ehea_qp failed (3)\n"); pr_err 2226 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_qp failed (4)\n"); pr_err 2246 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("ehea_create_eq failed (qp_eq)\n"); pr_err 2499 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("WARNING: sq not flushed completely\n"); pr_err 2535 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_qp failed (1)\n"); pr_err 2547 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("modify_ehea_qp failed (1)\n"); pr_err 2555 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("query_ehea_qp failed (2)\n"); pr_err 2562 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("unreg shared memory region failed\n"); pr_err 2746 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("unregister MR failed - driver inoperable!\n"); pr_err 2758 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("register MR failed - driver inoperable!\n"); pr_err 2837 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("no mem for cb4\n"); pr_err 2898 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed to register device. ret=%d\n", ret); pr_err 2904 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed to register attributes, ret=%d\n", ret); pr_err 3014 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("register_netdev failed. ret=%d\n", ret); pr_err 3039 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("setting up logical port with id=%d failed, ret=%d\n", pr_err 3071 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("bad device node: eth_dn name=%pOF\n", eth_dn); pr_err 3076 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("creating MR failed\n"); pr_err 3144 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("creating MR failed\n"); pr_err 3195 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("removing port with logical port id=%d failed. port not configured.\n", pr_err 3372 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("Invalid ibmebus device probed\n"); pr_err 3547 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed registering eHEA device driver on ebus\n"); pr_err 3554 drivers/net/ethernet/ibm/ehea/ehea_main.c pr_err("failed to register capabilities attribute, ret=%d\n", pr_err 58 drivers/net/ethernet/ibm/ehea/ehea_phyp.c pr_err("opcode=%lx ret=%lx" pr_err 104 drivers/net/ethernet/ibm/ehea/ehea_phyp.c pr_err("opcode=%lx ret=%lx" pr_err 504 drivers/net/ethernet/ibm/ehea/ehea_phyp.c pr_err("not on pageboundary\n"); pr_err 34 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("not on pageboundary\n"); pr_err 47 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("pagesize conflict! kernel pagesize=%d, ehea pagesize=%d\n", pr_err 130 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("alloc_resource_cq failed\n"); pr_err 142 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("hw_qpageit_get_inc failed\n"); pr_err 151 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("register_rpage_cq failed ehea_cq=%p hret=%llx counter=%i act_pages=%i\n", pr_err 160 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("registration of pages not complete hret=%llx\n", pr_err 166 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("CQ: registration of page failed hret=%llx\n", pr_err 222 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("destroy CQ failed\n"); pr_err 251 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("alloc_resource_eq failed\n"); pr_err 258 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("can't allocate eq pages\n"); pr_err 265 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("hw_qpageit_get_inc failed\n"); pr_err 349 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("destroy EQ failed\n"); pr_err 372 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("hw_qpageit_get_inc failed\n"); pr_err 380 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("register_rpage_qp failed\n"); pr_err 416 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("ehea_h_alloc_resource_qp failed\n"); pr_err 430 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("can't register for sq ret=%x\n", ret); pr_err 440 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("can't register for rq1 ret=%x\n", ret); pr_err 451 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("can't register for rq2 ret=%x\n", ret); pr_err 463 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("can't register for rq3 ret=%x\n", ret); pr_err 528 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("destroy QP failed\n"); pr_err 817 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("register_rpage_mr failed\n"); pr_err 871 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("no mem\n"); pr_err 881 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("alloc_resource_mr failed\n"); pr_err 888 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("no busmap available\n"); pr_err 904 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("registering mr failed\n"); pr_err 927 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("destroy MR failed\n"); pr_err 962 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, port=%llX\n", pr_err 965 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("CQ (resource=%llX) state: AER=0x%llX\n", pr_err 968 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("EQ (resource=%llX) state: AER=0x%llX\n", pr_err 983 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("Cannot allocate rblock memory\n"); pr_err 995 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("No error data available: %llX\n", res_handle); pr_err 997 drivers/net/ethernet/ibm/ehea/ehea_qmr.c pr_err("Error data could not be fetched: %llX\n", res_handle); pr_err 4105 drivers/net/ethernet/ibm/ibmvnic.c pr_err("mtu of %llu is not supported. Reverting.\n", pr_err 3111 drivers/net/ethernet/intel/e100.c pr_err("Cannot re-enable PCI device after reset\n"); pr_err 730 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("/*********************/\n"); pr_err 731 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old); pr_err 732 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("Calculated : 0x%04x\n", csum_new); pr_err 734 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("Offset Values\n"); pr_err 735 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("======== ======\n"); pr_err 738 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("Include this output when contacting your support provider.\n"); pr_err 739 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("This is not a software error! Something bad happened to\n"); pr_err 740 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("your hardware or EEPROM image. Ignoring this problem could\n"); pr_err 741 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("result in further problems, possibly loss of data,\n"); pr_err 742 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("corruption or system hangs!\n"); pr_err 743 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n"); pr_err 744 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("which is invalid and requires you to set the proper MAC\n"); pr_err 745 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("address manually before continuing to enable this network\n"); pr_err 746 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("device. Please inspect the EEPROM dump and report the\n"); pr_err 747 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("issue to your hardware vendor or Intel Customer Support.\n"); pr_err 748 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("/*********************/\n"); pr_err 1006 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("No usable DMA config, aborting\n"); pr_err 5173 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("Cannot enable PCI device from suspend\n"); pr_err 5281 drivers/net/ethernet/intel/e1000/e1000_main.c pr_err("Cannot re-enable PCI device after reset.\n"); pr_err 5049 drivers/net/ethernet/intel/i40e/i40e_main.c pr_err("Non-contiguous TC - Disabling DCB\n"); pr_err 15788 drivers/net/ethernet/intel/i40e/i40e_main.c pr_err("%s: Failed to create workqueue\n", i40e_driver_name); pr_err 3976 drivers/net/ethernet/intel/iavf/iavf_main.c pr_err("%s: Failed to create workqueue\n", iavf_driver_name); pr_err 87 drivers/net/ethernet/intel/ice/ice_dcb_lib.c pr_err("Non-contiguous TCs - Disabling DCB\n"); pr_err 3218 drivers/net/ethernet/intel/ice/ice_main.c pr_err("Failed to create workqueue\n"); pr_err 3224 drivers/net/ethernet/intel/ice/ice_main.c pr_err("failed to register PCI driver, err %d\n", status); pr_err 1449 drivers/net/ethernet/intel/igbvf/netdev.c pr_err("Too many unicast filters - No Space\n"); pr_err 383 drivers/net/ethernet/intel/ixgb/ixgb_main.c pr_err("No usable DMA configuration, aborting\n"); pr_err 2281 drivers/net/ethernet/intel/ixgb/ixgb_main.c pr_err("can't bring device back up after reset\n"); pr_err 545 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c pr_err("%-15s%s\n", rname, buf); pr_err 11512 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c pr_err("%s: Failed to create workqueue\n", ixgbe_driver_name); pr_err 1217 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c pr_err("Error receiving message from VF\n"); pr_err 649 drivers/net/ethernet/intel/ixgbevf/ethtool.c pr_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", pr_err 375 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("Detected Tx Unit Hang%s\n" pr_err 1816 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("RXDCTL.ENABLE queue %d not cleared while polling\n", pr_err 1836 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("RXDCTL.ENABLE queue %d not set while polling\n", pr_err 3040 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("init_shared_code failed: %d\n", err); pr_err 3598 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("Unable to start - perhaps the PF Driver isn't up yet\n"); pr_err 4614 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("invalid MAC address\n"); pr_err 4902 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c pr_err("%s: Failed to create workqueue\n", ixgbevf_driver_name); pr_err 140 drivers/net/ethernet/intel/ixgbevf/vf.c pr_err("PCI_MMCONFIG needs to be enabled for Hyper-V\n"); pr_err 66 drivers/net/ethernet/jme.c pr_err("phy(%d) read timeout : %d\n", phy, reg); pr_err 95 drivers/net/ethernet/jme.c pr_err("phy(%d) write timeout : %d\n", phy, reg); pr_err 292 drivers/net/ethernet/jme.c pr_err("eeprom reload timeout\n"); pr_err 462 drivers/net/ethernet/jme.c pr_err("Waiting speed resolve timeout\n"); pr_err 695 drivers/net/ethernet/jme.c pr_err("Disable TX engine timeout\n"); pr_err 932 drivers/net/ethernet/jme.c pr_err("Disable RX engine timeout\n"); pr_err 1312 drivers/net/ethernet/jme.c pr_err("Allocating resources for RX error, Device STOPPED!\n"); pr_err 1318 drivers/net/ethernet/jme.c pr_err("Allocating resources for TX error, Device STOPPED!\n"); pr_err 2944 drivers/net/ethernet/jme.c pr_err("Cannot enable PCI device\n"); pr_err 2950 drivers/net/ethernet/jme.c pr_err("Cannot set PCI DMA Mask\n"); pr_err 2956 drivers/net/ethernet/jme.c pr_err("No PCI resource region found\n"); pr_err 2963 drivers/net/ethernet/jme.c pr_err("Cannot obtain PCI resource region\n"); pr_err 3021 drivers/net/ethernet/jme.c pr_err("Mapping PCI resource region error\n"); pr_err 3095 drivers/net/ethernet/jme.c pr_err("Can not find phy_id\n"); pr_err 3127 drivers/net/ethernet/jme.c pr_err("Reload eeprom for reading MAC Address error\n"); pr_err 3139 drivers/net/ethernet/jme.c pr_err("Cannot register net device\n"); pr_err 727 drivers/net/ethernet/lantiq_etop.c pr_err("ltq_etop: Error registering platform driver!"); pr_err 1925 drivers/net/ethernet/marvell/mvneta.c pr_err("Can't refill queue %d. Done %d from %d\n", pr_err 2074 drivers/net/ethernet/marvell/mvneta.c pr_err("get last desc, but left_size (%d) != 0\n", pr_err 1874 drivers/net/ethernet/marvell/skge.c pr_err("%s: uncorrectable pair swap error\n", pr_err 2408 drivers/net/ethernet/marvell/skge.c pr_err("%s: autonegotiation failed (%s)\n", skge->netdev->name, reason); pr_err 319 drivers/net/ethernet/mellanox/mlx4/eq.c pr_err("%s: Error: asking for slave:%d, port:%d\n", pr_err 336 drivers/net/ethernet/mellanox/mlx4/eq.c pr_err("%s: Error: asking for slave:%d, port:%d\n", pr_err 382 drivers/net/ethernet/mellanox/mlx4/eq.c pr_err("%s: Error: asking for slave:%d, port:%d\n", pr_err 419 drivers/net/ethernet/mellanox/mlx4/eq.c pr_err("%s: BUG!!! UNKNOWN state: slave:%d, port:%d\n", pr_err 837 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h pr_err(DRV_NAME " %s: " format, \ pr_err 1211 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("implementation missing\n"); pr_err 1340 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n", pr_err 4165 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("Fail to attach rule to qp 0x%x\n", qpn); pr_err 4182 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("Fail to detach rule from qp 0x%x reg_id = 0x%llx\n", pr_err 4213 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n", pr_err 4265 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d\n", pr_err 4396 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("Steering rule with qpn 0x%x rejected\n", qpn); pr_err 4426 drivers/net/ethernet/mellanox/mlx4/resource_tracker.c pr_err("Corrupted mailbox\n"); pr_err 159 drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c pr_err("buffer_size[%d]=%d is not enough for lossless buffer\n", pr_err 3268 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c pr_err("can't support more than %d output ports, can't offload forwarding\n", pr_err 3320 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c pr_err("devices %s %s not on same switch HW, can't offload forwarding\n", pr_err 3340 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c pr_err("devices %s %s not on same switch HW, can't offload forwarding\n", pr_err 958 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c pr_err("mlx5_core: failed to modify rule to point on flow table %d\n", pr_err 1016 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c pr_err("mlx5: flow steering failed to find root of namespace\n"); pr_err 695 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c pr_err("CQ completion CQ: #%u\n", mcq->cqn); pr_err 71 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Firmware flash failed: %s\n", pr_err 78 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Timeout reached on FSM state change"); pr_err 116 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Component %d is of size %d which is bigger than limit %d\n", pr_err 187 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Could not find device PSID in MFA2 file\n"); pr_err 218 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Firmware file is not MFA2\n"); pr_err 232 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Could not lock the firmware FSM\n"); pr_err 250 drivers/net/ethernet/mellanox/mlxfw/mlxfw_fsm.c pr_err("Could not activate the downloaded image\n"); pr_err 104 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Multi has invalid child"); pr_err 128 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device %d is not a valid TLV error\n", dev_idx); pr_err 139 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device %d does not have PSID\n", dev_idx); pr_err 145 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device %d PSID TLV is not valid\n", dev_idx); pr_err 160 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device %d has no components\n", dev_idx); pr_err 173 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device %d COMPONENT_PTR TLV is not valid\n", pr_err 197 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component %d is not a valid TLV error\n", comp_idx); pr_err 207 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component descriptor %d multi TLV error\n", comp_idx); pr_err 213 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component %d does not have a valid descriptor\n", pr_err 236 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device TLV error\n"); pr_err 249 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Device TLV error\n"); pr_err 278 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Could not parse package descriptor TLV\n"); pr_err 284 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("First TLV is not of valid multi type\n"); pr_err 294 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Could not parse package descriptor TLV\n"); pr_err 300 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("First device TLV is not valid\n"); pr_err 311 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component block is out side the file\n"); pr_err 317 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component block size is too big\n"); pr_err 405 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("xz no memory\n"); pr_err 408 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("xz file corrupted\n"); pr_err 411 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("xz format not found\n"); pr_err 414 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("unsupported xz option\n"); pr_err 417 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("xz dictionary too small\n"); pr_err 420 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("xz error %d\n", xz_ret); pr_err 454 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("xz section too short\n"); pr_err 560 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component could not be reached in CB\n"); pr_err 566 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c pr_err("Component has wrong magic\n"); pr_err 65 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c pr_err("TLV parsing error\n"); pr_err 86 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c pr_err("TLV parsing error\n"); pr_err 33 drivers/net/ethernet/mellanox/mlxsw/item.h pr_err("mlxsw: item bug (name=%s,offset=%x,step=%x,in_step_offset=%x,typesize=%zx)\n", pr_err 215 drivers/net/ethernet/mellanox/mlxsw/item.h pr_err("mlxsw: item bug (name=%s,offset=%x,element_size=%x)\n", pr_err 1003 drivers/net/ethernet/micrel/ks8842.c pr_err("Failed to request IRQ: %d: %d\n", adapter->irq, err); pr_err 624 drivers/net/ethernet/micrel/ks8851_mll.c pr_err("Failed to request IRQ: %d: %d\n", netdev->irq, err); pr_err 273 drivers/net/ethernet/microchip/encx24j600-regmap.c pr_err("%s: reg=%02x reg_size=%zu\n", __func__, reg, reg_size); pr_err 281 drivers/net/ethernet/microchip/encx24j600-regmap.c pr_err("%s: reg=%02x val_size=%zu\n", __func__, reg, val_size); pr_err 382 drivers/net/ethernet/microchip/encx24j600-regmap.c pr_err("%s: error %d reading reg %02x\n", __func__, ret, pr_err 411 drivers/net/ethernet/microchip/encx24j600-regmap.c pr_err("%s: error %d writing reg %02x=%04x\n", __func__, ret, pr_err 4069 drivers/net/ethernet/myricom/myri10ge/myri10ge.c pr_err("Illegal rssh hash type %d, defaulting to source port\n", pr_err 5426 drivers/net/ethernet/neterion/s2io.c pr_err("Adapter Link down, cannot blink LED\n"); pr_err 8540 drivers/net/ethernet/neterion/s2io.c pr_err("Cannot re-enable PCI device after reset.\n"); pr_err 8564 drivers/net/ethernet/neterion/s2io.c pr_err("Can't bring device back up after reset.\n"); pr_err 8570 drivers/net/ethernet/neterion/s2io.c pr_err("Can't restore mac addr after reset.\n"); pr_err 112 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("cmd can't swap arguments\n"); pr_err 117 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("cmd can't use LMextn\n"); pr_err 166 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("BUG: branch defer out of bounds %d\n", defer); pr_err 385 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("indirect shift is not allowed on rotation\n"); pr_err 637 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("relocation of a large immediate!\n"); pr_err 3306 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("BUG: BPF-to-BPF call has no destination recorded\n"); pr_err 3539 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("BUG: failed to fix up callee register saving\n"); pr_err 3579 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("Fixup found block not ending in branch %d %02x %016llx!!\n", pr_err 3593 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("Non-exit jump doesn't have destination info recorded!!\n"); pr_err 3600 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("Branch landing on removed instruction!!\n"); pr_err 4475 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("Translation failed with error %d (translated: %u)\n", pr_err 4561 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("BUG: failed to detect subprogram registers needs\n"); pr_err 4570 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("BUG: failed to detect subprogram registers needs\n"); pr_err 4597 drivers/net/ethernet/netronome/nfp/bpf/jit.c pr_err("relocation of unknown helper %d\n", pr_err 65 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("Can't decode/encode immed!\n"); pr_err 133 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("LM offset too large\n"); pr_err 143 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("LM offset in inc/dev mode\n"); pr_err 150 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("bad LM mode for unrestricted operands %d\n", pr_err 156 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("immediate too large\n"); pr_err 164 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("unrecognized reg encoding %08x\n", reg); pr_err 220 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("bad LM mode for restricted operands %d\n", pr_err 226 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("LM offset too large\n"); pr_err 233 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("immediate too large\n"); pr_err 241 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("NNRs used with restricted encoding\n"); pr_err 245 drivers/net/ethernet/netronome/nfp/nfp_asm.c pr_err("unrecognized reg encoding\n"); pr_err 212 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_rtsym.c pr_err("rtsym '%s': type NONE\n", sym->name); pr_err 711 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_target.c pr_err("Invalid CPP target: %d\n", target); pr_err 733 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_target.c pr_err("Can't encode CPP address: %d\n", err); pr_err 5700 drivers/net/ethernet/nvidia/forcedeth.c pr_err("np->txrx_stats, alloc memory error.\n"); pr_err 1415 drivers/net/ethernet/nxp/lpc_eth.c pr_err("%s: not found (%d).\n", MODNAME, ret); pr_err 309 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c pr_err("Error: busy bit is not cleared\n"); pr_err 1363 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c pr_err("Receive Peg initialization not complete, state: 0x%x.\n", val); pr_err 699 drivers/net/ethernet/qlogic/qede/qede_main.c pr_err("etherdev allocation failed\n"); pr_err 533 drivers/net/ethernet/qlogic/qla3xxx.c pr_err("%s: Failed ql_sem_spinlock()\n", __func__); pr_err 3776 drivers/net/ethernet/qlogic/qla3xxx.c pr_err("%s cannot enable PCI device\n", pci_name(pdev)); pr_err 3782 drivers/net/ethernet/qlogic/qla3xxx.c pr_err("%s cannot obtain PCI resources\n", pci_name(pdev)); pr_err 3797 drivers/net/ethernet/qlogic/qla3xxx.c pr_err("%s no usable DMA configuration\n", pci_name(pdev)); pr_err 3829 drivers/net/ethernet/qlogic/qla3xxx.c pr_err("%s: cannot map device registers\n", pci_name(pdev)); pr_err 3879 drivers/net/ethernet/qlogic/qla3xxx.c pr_err("%s: cannot register net device\n", pci_name(pdev)); pr_err 338 drivers/net/ethernet/qualcomm/qca_uart.c pr_err("qca_uart: Fail to retrieve private structure\n"); pr_err 138 drivers/net/ethernet/realtek/8139too.c pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ pr_err 296 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c pr_err("Invalid Error type\n"); pr_err 341 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c pr_err("Invalid L2 Packet type\n"); pr_err 376 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c pr_err("Invalid L3/L4 Packet type\n"); pr_err 455 drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c pr_err("Time stamp corrupted\n"); pr_err 721 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__); pr_err 1250 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c pr_err("%s: TX dma mapping failed!!\n", __func__); pr_err 2170 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c pr_err("%s: ERROR %i registering the device\n", __func__, ret); pr_err 2262 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c pr_err("driver registration failed\n"); pr_err 2290 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c pr_err("%s: ERROR broken module parameter conversion\n", __func__); pr_err 103 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c pr_err("%s: main dt probe failed\n", __func__); pr_err 110 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c pr_err("%s: main driver probe failed\n", __func__); pr_err 244 drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c pr_err("failed to register the platform driver\n"); pr_err 761 drivers/net/ethernet/sfc/falcon/falcon.c pr_err("%s: timed out waiting for %s\n", pr_err 36 drivers/net/ethernet/sfc/falcon/mtd.c pr_err("%s: %s sync failed (%d)\n", pr_err 36 drivers/net/ethernet/sfc/mtd.c pr_err("%s: %s sync failed (%d)\n", pr_err 375 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("Failed to read MAC address\n"); pr_err 1184 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("%s: Unable to obtain 64 bit DMA for consistent allocations\n", pr_err 1191 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("%s: No usable DMA configuration, aborting.\n", pr_err 1226 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("ioc3eth(%s): ioremap failed, goodbye.\n", pr_err 1248 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("ioc3-eth: rx ring allocation failed\n"); pr_err 1258 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("ioc3-eth: tx ring allocation failed\n"); pr_err 1276 drivers/net/ethernet/sgi/ioc3-eth.c pr_err("ioc3-eth(%s): Didn't find a PHY, goodbye.\n", pr_err 380 drivers/net/ethernet/sis/sis190.c pr_err("PHY command failed !\n"); pr_err 1474 drivers/net/ethernet/sis/sis190.c pr_err("%s: enable failure\n", pci_name(pdev)); pr_err 1482 drivers/net/ethernet/sis/sis190.c pr_err("%s: region #0 is no MMIO resource\n", pr_err 1488 drivers/net/ethernet/sis/sis190.c pr_err("%s: invalid PCI region size(s)\n", pr_err 1496 drivers/net/ethernet/sis/sis190.c pr_err("%s: could not request regions\n", pr_err 1504 drivers/net/ethernet/sis/sis190.c pr_err("%s: DMA configuration failed\n", pr_err 1514 drivers/net/ethernet/sis/sis190.c pr_err("%s: cannot remap MMIO, aborting\n", pr_err 651 drivers/net/ethernet/smsc/smc91c92_cs.c pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME); pr_err 850 drivers/net/ethernet/smsc/smc91x.h pr_err("%s: bank reg screwed (0x%04x)\n", \ pr_err 1529 drivers/net/ethernet/smsc/smsc9420.c pr_err("Cannot enable smsc9420\n"); pr_err 208 drivers/net/ethernet/stmicro/stmmac/enh_desc.c pr_err("\tIPC Csum Error/Giant frame\n"); pr_err 4942 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c pr_err("%s: ERROR broken module parameter conversion", __func__); pr_err 809 drivers/net/ethernet/sun/cassini.c pr_err("Failed to load firmware \"%s\"\n", pr_err 814 drivers/net/ethernet/sun/cassini.c pr_err("bogus length %zu in \"%s\"\n", pr_err 3455 drivers/net/ethernet/sun/cassini.c pr_err("MII phy did not respond [%08x]\n", pr_err 3871 drivers/net/ethernet/sun/cassini.c pr_err("reset called in cas_change_mtu\n"); pr_err 4181 drivers/net/ethernet/sun/cassini.c pr_err("reset called in cas_link_timer\n"); pr_err 296 drivers/net/ethernet/sun/ldmvsw.c pr_err("Port lacks %s property\n", remote_macaddr_prop); pr_err 304 drivers/net/ethernet/sun/ldmvsw.c pr_err("Port lacks %s property\n", id_prop); pr_err 313 drivers/net/ethernet/sun/ldmvsw.c pr_err("Failed to get vnet for vsw-port\n"); pr_err 323 drivers/net/ethernet/sun/ldmvsw.c pr_err("Failed to alloc netdev for vsw-port\n"); pr_err 371 drivers/net/ethernet/sun/ldmvsw.c pr_err("Cannot register net device, aborting\n"); pr_err 448 drivers/net/ethernet/sun/ldmvsw.c pr_err("Ports not removed by VIO subsystem!\n"); pr_err 8568 drivers/net/ethernet/sun/niu.c pr_err("Too many PHY ports\n"); pr_err 8681 drivers/net/ethernet/sun/niu.c pr_err("niu%d: Too many RX channels (%d), resetting to one per port\n", pr_err 8687 drivers/net/ethernet/sun/niu.c pr_err("niu%d: Too many TX channels (%d), resetting to one per port\n", pr_err 8892 drivers/net/ethernet/sun/niu.c pr_err("Unsupported port config 10G[%d] 1G[%d]\n", pr_err 8910 drivers/net/ethernet/sun/niu.c pr_err("Cannot identify platform type, 1gport=%d\n", lowest_1g); pr_err 1988 drivers/net/ethernet/sun/sungem.c pr_err("RIO GEM lacks MII phy, mif_cfg[%08x]\n", pr_err 2028 drivers/net/ethernet/sun/sungem.c pr_err("RIO MII phy will not respond\n"); pr_err 2043 drivers/net/ethernet/sun/sungem.c pr_err("GEM has bogus fifo sizes tx(%d) rx(%d)\n", pr_err 2051 drivers/net/ethernet/sun/sungem.c pr_err("RIO GEM has bogus fifo sizes tx(%d) rx(%d)\n", pr_err 2793 drivers/net/ethernet/sun/sungem.c pr_err("%s: can't get mac-address\n", dev->name); pr_err 2860 drivers/net/ethernet/sun/sungem.c pr_err("Cannot enable MMIO operation, aborting\n"); pr_err 2881 drivers/net/ethernet/sun/sungem.c pr_err("No usable DMA configuration, aborting\n"); pr_err 2891 drivers/net/ethernet/sun/sungem.c pr_err("Cannot find proper PCI device base address, aborting\n"); pr_err 2907 drivers/net/ethernet/sun/sungem.c pr_err("Cannot obtain PCI resources, aborting\n"); pr_err 2926 drivers/net/ethernet/sun/sungem.c pr_err("Cannot map device registers, aborting\n"); pr_err 2971 drivers/net/ethernet/sun/sungem.c pr_err("Cannot allocate init block, aborting\n"); pr_err 3001 drivers/net/ethernet/sun/sungem.c pr_err("Cannot register net device, aborting\n"); pr_err 327 drivers/net/ethernet/sun/sunvnet.c pr_err("Cannot register net device, aborting\n"); pr_err 436 drivers/net/ethernet/sun/sunvnet.c pr_err("Cannot find port parent vnet\n"); pr_err 444 drivers/net/ethernet/sun/sunvnet.c pr_err("Port lacks %s property\n", remote_macaddr_prop); pr_err 57 drivers/net/ethernet/sun/sunvnet_common.c pr_err("Received unknown msg [%02x:%02x:%04x:%08x]\n", pr_err 59 drivers/net/ethernet/sun/sunvnet_common.c pr_err("Resetting connection\n"); pr_err 656 drivers/net/ethernet/sun/sunvnet_common.c pr_err("RX out of sequence seq[0x%llx] rcv_nxt[0x%llx]\n", pr_err 746 drivers/net/ethernet/sun/sunvnet_common.c pr_err("%s: Got unexpected MCAST reply [%02x:%02x:%04x:%08x]\n", pr_err 1243 drivers/net/ethernet/sun/sunvnet_common.c pr_err("vnet_handle_offloads GSO with unknown transport " pr_err 160 drivers/net/ethernet/tehuti/tehuti.c pr_err("pci_alloc_consistent failed\n"); pr_err 468 drivers/net/ethernet/tehuti/tehuti.c pr_err("HW reset failed\n"); pr_err 492 drivers/net/ethernet/tehuti/tehuti.c pr_err("HW reset failed\n"); pr_err 649 drivers/net/ethernet/tehuti/tehuti.c pr_err("can't copy from user\n"); pr_err 713 drivers/net/ethernet/tehuti/tehuti.c pr_err("invalid VID: %u (> 4096)\n", vid); pr_err 1923 drivers/net/ethernet/tehuti/tehuti.c pr_err("No usable DMA configuration, aborting\n"); pr_err 1938 drivers/net/ethernet/tehuti/tehuti.c pr_err("no MMIO resource\n"); pr_err 1944 drivers/net/ethernet/tehuti/tehuti.c pr_err("MMIO resource (%x) too small\n", regionSize); pr_err 1951 drivers/net/ethernet/tehuti/tehuti.c pr_err("ioremap failed\n"); pr_err 1957 drivers/net/ethernet/tehuti/tehuti.c pr_err("invalid irq (%d)\n", pdev->irq); pr_err 1976 drivers/net/ethernet/tehuti/tehuti.c pr_err("Can't enable msi. error is %d\n", err); pr_err 2054 drivers/net/ethernet/tehuti/tehuti.c pr_err("load MAC address failed\n"); pr_err 2060 drivers/net/ethernet/tehuti/tehuti.c pr_err("register_netdev failed\n"); pr_err 531 drivers/net/ethernet/tehuti/tehuti.h pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args) pr_err 539 drivers/net/ethernet/tehuti/tehuti.h pr_err("%s:%-5d: ENTER\n", __func__, __LINE__); \ pr_err 544 drivers/net/ethernet/tehuti/tehuti.h pr_err("%s:%-5d: RETURN\n", __func__, __LINE__); \ pr_err 549 drivers/net/ethernet/tehuti/tehuti.h pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args) pr_err 556 drivers/net/ethernet/tehuti/tehuti.h pr_err(fmt, ##args); \ pr_err 296 drivers/net/ethernet/ti/cpmac.c pr_err("unable to get cpmac clock\n"); pr_err 1195 drivers/net/ethernet/ti/cpmac.c pr_err("Can't ioremap mdio registers\n"); pr_err 153 drivers/net/ethernet/ti/cpts.c pr_err("cpts: event pool empty\n"); pr_err 181 drivers/net/ethernet/ti/cpts.c pr_err("cpts: unknown event type\n"); pr_err 199 drivers/net/ethernet/ti/cpts.c pr_err("cpts: unable to obtain a time stamp\n"); pr_err 133 drivers/net/ethernet/ti/netcp_sgmii.c pr_err("serdes PLL not locked\n"); pr_err 226 drivers/net/ethernet/ti/netcp_xgbepcsr.c pr_err("XGBE serdes not locked: time out.\n"); pr_err 371 drivers/net/ethernet/ti/netcp_xgbepcsr.c pr_err("XGBE: unknown current_state[%d] %d\n", pr_err 413 drivers/net/ethernet/ti/tlan.c pr_err("Could not register pci driver\n"); pr_err 480 drivers/net/ethernet/ti/tlan.c pr_err("Could not reserve IO regions\n"); pr_err 506 drivers/net/ethernet/ti/tlan.c pr_err("No suitable PCI mapping available\n"); pr_err 520 drivers/net/ethernet/ti/tlan.c pr_err("No IO mappings available\n"); pr_err 575 drivers/net/ethernet/ti/tlan.c pr_err("Could not set up device\n"); pr_err 581 drivers/net/ethernet/ti/tlan.c pr_err("Could not register device\n"); pr_err 854 drivers/net/ethernet/ti/tlan.c pr_err("Could not allocate lists and buffers for %s\n", pr_err 871 drivers/net/ethernet/ti/tlan.c pr_err("%s: Error reading MAC from eeprom: %d\n", pr_err 1258 drivers/net/ethernet/toshiba/ps3_gelic_wireless.c pr_err("%s: PSK length wrong %d\n", __func__, pr_err 1195 drivers/net/ethernet/toshiba/spider_net.c pr_err("buf_addr=x%08x\n", hw_buf_addr); pr_err 1196 drivers/net/ethernet/toshiba/spider_net.c pr_err("buf_size=x%08x\n", hwdescr->buf_size); pr_err 1197 drivers/net/ethernet/toshiba/spider_net.c pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr); pr_err 1198 drivers/net/ethernet/toshiba/spider_net.c pr_err("result_size=x%08x\n", hwdescr->result_size); pr_err 1199 drivers/net/ethernet/toshiba/spider_net.c pr_err("valid_size=x%08x\n", hwdescr->valid_size); pr_err 1200 drivers/net/ethernet/toshiba/spider_net.c pr_err("data_status=x%08x\n", hwdescr->data_status); pr_err 1201 drivers/net/ethernet/toshiba/spider_net.c pr_err("data_error=x%08x\n", hwdescr->data_error); pr_err 1202 drivers/net/ethernet/toshiba/spider_net.c pr_err("which=%ld\n", descr - card->rx_chain.ring); pr_err 558 drivers/net/fddi/defxx.c pr_err("%s: Cannot enable PCI device, aborting\n", pr_err 572 drivers/net/fddi/defxx.c pr_err("%s: Cannot use MMIO, no address set, aborting\n", pr_err 574 drivers/net/fddi/defxx.c pr_err("%s: Run ECU and set adapter's MMIO location\n", pr_err 576 drivers/net/fddi/defxx.c pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\"" pr_err 588 drivers/net/fddi/defxx.c pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, " pr_err 597 drivers/net/fddi/defxx.c pr_err("%s: Cannot reserve I/O resource " pr_err 607 drivers/net/fddi/defxx.c pr_err("%s: Cannot reserve I/O resource " pr_err 270 drivers/net/fddi/defza.c pr_err("%s: RESET timed out!, state %x\n", fp->name, state); pr_err 274 drivers/net/fddi/defza.c pr_err("%s: RESET failed!, state %x, failure ID %x\n", pr_err 399 drivers/net/fddi/defza.c pr_err("%s: INIT command timed out!, state %x\n", fp->name, pr_err 405 drivers/net/fddi/defza.c pr_err("%s: INIT command failed!, status %02x, state %x\n", pr_err 1050 drivers/net/fddi/defza.c pr_err("%s: RESET timed out!\n", fp->name); pr_err 1202 drivers/net/fddi/defza.c pr_err("%s: PARAM command timed out!, state %x\n", fp->name, pr_err 1208 drivers/net/fddi/defza.c pr_err("%s: PARAM command failed!, status %02x, state %x\n", pr_err 1244 drivers/net/fddi/defza.c pr_err("%s: SHUT timed out!, state %x\n", fp->name, state); pr_err 1248 drivers/net/fddi/defza.c pr_err("%s: SHUT failed!, state %x\n", fp->name, state); pr_err 1315 drivers/net/fddi/defza.c pr_err("%s: cannot reserve MMIO region\n", fp->name); pr_err 1323 drivers/net/fddi/defza.c pr_err("%s: cannot map MMIO\n", fp->name); pr_err 1362 drivers/net/fddi/defza.c pr_err("%s: unable to get IRQ %d!\n", fp->name, dev->irq); pr_err 1509 drivers/net/fddi/defza.c pr_err("%s: initialization failure, aborting!\n", fp->name); pr_err 39 drivers/net/fjes/fjes_hw.c pr_err("request_mem_region failed\n"); pr_err 356 drivers/net/fjes/fjes_hw.c pr_err("%s: reset error", __func__); pr_err 1398 drivers/net/gtp.c pr_err("error loading GTP module loaded\n"); pr_err 858 drivers/net/hamradio/baycom_epp.c pr_err("%s: no device found\n", bc_drvname); pr_err 331 drivers/net/hamradio/baycom_par.c pr_err("%s: no device found\n", bc_drvname); pr_err 246 drivers/net/hamradio/bpqether.c pr_err("bpqether: out of memory\n"); pr_err 1128 drivers/net/hamradio/yam.c pr_err("yam: cannot allocate net device\n"); pr_err 2358 drivers/net/hyperv/netvsc_drv.c pr_err("Unable to register netdev.\n"); pr_err 379 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 410 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 435 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 458 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 480 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 489 drivers/net/netconsole.c pr_err("invalid IPv6 address at: <%c>\n", *end); pr_err 516 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 525 drivers/net/netconsole.c pr_err("invalid IPv6 address at: <%c>\n", *end); pr_err 553 drivers/net/netconsole.c pr_err("target (%s) is enabled, disable to update parameters\n", pr_err 928 drivers/net/netconsole.c pr_err("cleaning up\n"); pr_err 174 drivers/net/netdevsim/bus.c pr_err("Value of \"id\" is too big.\n"); pr_err 179 drivers/net/netdevsim/bus.c pr_err("Format for adding new device is \"id port_count\" (uint uint).\n"); pr_err 207 drivers/net/netdevsim/bus.c pr_err("Value of \"id\" is too big.\n"); pr_err 212 drivers/net/netdevsim/bus.c pr_err("Format for deleting device is \"id\" (uint).\n"); pr_err 60 drivers/net/netdevsim/dev.c pr_err("Failed to create region snapshot\n"); pr_err 176 drivers/net/netdevsim/dev.c pr_err("Failed to register IPv4 top resource\n"); pr_err 185 drivers/net/netdevsim/dev.c pr_err("Failed to register IPv4 FIB resource\n"); pr_err 194 drivers/net/netdevsim/dev.c pr_err("Failed to register IPv4 FIB rules resource\n"); pr_err 204 drivers/net/netdevsim/dev.c pr_err("Failed to register IPv6 top resource\n"); pr_err 213 drivers/net/netdevsim/dev.c pr_err("Failed to register IPv6 FIB resource\n"); pr_err 222 drivers/net/netdevsim/dev.c pr_err("Failed to register IPv6 FIB rules resource\n"); pr_err 254 drivers/net/netdevsim/fib.c pr_err("Failed to register pernet subsystem\n"); pr_err 260 drivers/net/netdevsim/fib.c pr_err("Failed to register fib notifier\n"); pr_err 180 drivers/net/phy/dp83640.c pr_err("gpio_tab[%d]=%hu out of range", i, gpio_tab[i]); pr_err 632 drivers/net/phy/dp83640.c pr_err("PHY calibration pin not available - PHY is not calibrated."); pr_err 217 drivers/net/phy/fixed_phy.c pr_err("error getting GPIO for fixed link %pOF, proceed without\n", pr_err 73 drivers/net/phy/mdio-xgene.c pr_err("MCX mac write failed, addr: 0x%04x\n", wr_addr); pr_err 253 drivers/net/phy/mdio-xgene.c pr_err("XGENET_MII_MGMT write failed\n"); pr_err 390 drivers/net/phy/mdio_bus.c pr_err("mii_bus %s failed to register\n", bus->id); pr_err 88 drivers/net/phy/mdio_device.c pr_err("MDIO %d failed to add\n", mdiodev->addr); pr_err 200 drivers/net/phy/mdio_device.c pr_err("%s: Error %d in registering driver\n", pr_err 1002 drivers/net/phy/phy_device.c pr_err("PHY %s not found\n", bus_id); pr_err 1346 drivers/net/phy/phy_device.c pr_err("PHY %s not found\n", bus_id); pr_err 2314 drivers/net/phy/phy_device.c pr_err("%s: features and get_features must not both be set\n", pr_err 2328 drivers/net/phy/phy_device.c pr_err("%s: Error %d in registering driver\n", pr_err 644 drivers/net/ppp/ppp_generic.c pr_err("PPP: not interface or channel??\n"); pr_err 1174 drivers/net/ppp/ppp_generic.c pr_err("failed to register PPP pernet device (%d)\n", err); pr_err 1180 drivers/net/ppp/ppp_generic.c pr_err("failed to register PPP device (%d)\n", err); pr_err 1192 drivers/net/ppp/ppp_generic.c pr_err("failed to register rtnetlink PPP handler\n"); pr_err 3260 drivers/net/ppp/ppp_generic.c pr_err("ppp: destroying undead channel %p !\n", pch); pr_err 3272 drivers/net/ppp/ppp_generic.c pr_err("PPP: removing module but units remain!\n"); pr_err 462 drivers/net/ppp/pptp.c pr_err("PPTP: failed to register PPP channel (%d)\n", error); pr_err 651 drivers/net/ppp/pptp.c pr_err("PPTP: can't add gre protocol\n"); pr_err 657 drivers/net/ppp/pptp.c pr_err("PPTP: can't register sk_proto\n"); pr_err 663 drivers/net/ppp/pptp.c pr_err("PPTP: can't register pppox_proto\n"); pr_err 613 drivers/net/rionet.c pr_err("%s: error requesting doorbells\n", DRV_NAME); pr_err 723 drivers/net/rionet.c pr_err("%s: failed to register reboot notifier (err=%d)\n", pr_err 730 drivers/net/rionet.c pr_err("%s: class_interface_register error: %d\n", pr_err 2121 drivers/net/tun.c pr_err("unexpected GSO type: " pr_err 3684 drivers/net/tun.c pr_err("Can't register link_ops\n"); pr_err 3690 drivers/net/tun.c pr_err("Can't register misc device %d\n", TUN_MINOR); pr_err 3696 drivers/net/tun.c pr_err("Can't register netdevice notifier\n"); pr_err 628 drivers/net/usb/hso.c pr_err("%s: no free serial devices in table\n", __func__); pr_err 1091 drivers/net/usb/hso.c pr_err("%s: no tty structures", __func__); pr_err 1337 drivers/net/usb/hso.c pr_err("%s: serial is NULL\n", __func__); pr_err 1761 drivers/net/usb/hso.c pr_err("%s: Wrong arguments\n", __func__); pr_err 3264 drivers/net/usb/hso.c pr_err("%s - tty_register_driver failed(%d)\n", pr_err 3272 drivers/net/usb/hso.c pr_err("Could not register hso driver - error: %d\n", result); pr_err 313 drivers/net/wan/c101.c pr_err("invalid IRQ value\n"); pr_err 318 drivers/net/wan/c101.c pr_err("invalid RAM value\n"); pr_err 328 drivers/net/wan/c101.c pr_err("unable to allocate memory\n"); pr_err 334 drivers/net/wan/c101.c pr_err("could not allocate IRQ\n"); pr_err 341 drivers/net/wan/c101.c pr_err("could not request RAM window\n"); pr_err 348 drivers/net/wan/c101.c pr_err("could not map I/O address\n"); pr_err 424 drivers/net/wan/c101.c pr_err("invalid hardware parameters\n"); pr_err 955 drivers/net/wan/farsync.c pr_err("Mailbox safety timeout\n"); pr_err 1235 drivers/net/wan/farsync.c pr_err("Frame received with 0 length. Card %d Port %d\n", pr_err 1478 drivers/net/wan/farsync.c pr_err("Interrupt received for card %d in a non running state (%d)\n", pr_err 1605 drivers/net/wan/farsync.c pr_err("intr: unknown card event %d. ignored\n", event); pr_err 1627 drivers/net/wan/farsync.c pr_err("Bad shared memory version %d expected %d\n", pr_err 1633 drivers/net/wan/farsync.c pr_err("Missing shared memory signature\n"); pr_err 1641 drivers/net/wan/farsync.c pr_err("Firmware initialisation failed. Card halted\n"); pr_err 1645 drivers/net/wan/farsync.c pr_err("Unknown firmware status 0x%x\n", i); pr_err 2081 drivers/net/wan/farsync.c pr_err("Attempt to configure card %d in non-running state (%d)\n", pr_err 2373 drivers/net/wan/farsync.c pr_err("Cannot register HDLC device for port %d (errno %d)\n", pr_err 2439 drivers/net/wan/farsync.c pr_err("Failed to enable card. Err %d\n", -err); pr_err 2444 drivers/net/wan/farsync.c pr_err("Failed to allocate regions. Err %d\n", -err); pr_err 2453 drivers/net/wan/farsync.c pr_err("Physical memory remap failed\n"); pr_err 2458 drivers/net/wan/farsync.c pr_err("Control memory remap failed\n"); pr_err 2466 drivers/net/wan/farsync.c pr_err("Unable to register interrupt %d\n", card->irq); pr_err 2493 drivers/net/wan/farsync.c pr_err("FarSync: out of memory\n"); pr_err 2542 drivers/net/wan/farsync.c pr_err("FarSync: too many cards\n"); pr_err 2559 drivers/net/wan/farsync.c pr_err("Could not allocate rx dma buffer\n"); pr_err 2567 drivers/net/wan/farsync.c pr_err("Could not allocate tx dma buffer\n"); pr_err 1074 drivers/net/wan/fsl_ucc_hdlc.c pr_err("%pOFn: failed to lookup pdev\n", np); pr_err 1225 drivers/net/wan/fsl_ucc_hdlc.c pr_err("ucc_hdlc: unable to allocate memory\n"); pr_err 1239 drivers/net/wan/fsl_ucc_hdlc.c pr_err("ucc_hdlc: unable to register hdlc device\n"); pr_err 259 drivers/net/wan/hostess_sv11.c pr_err("Z8530 series device not found\n"); pr_err 286 drivers/net/wan/hostess_sv11.c pr_err("unable to register HDLC device\n"); pr_err 163 drivers/net/wan/lapbether.c pr_err("lapb_connect_request error: %d\n", err); pr_err 167 drivers/net/wan/lapbether.c pr_err("lapb_disconnect_request err: %d\n", err); pr_err 176 drivers/net/wan/lapbether.c pr_err("lapb_data_request error - %d\n", err); pr_err 216 drivers/net/wan/lapbether.c pr_err("out of memory\n"); pr_err 233 drivers/net/wan/lapbether.c pr_err("out of memory\n"); pr_err 272 drivers/net/wan/lapbether.c pr_err("lapb_register error: %d\n", err); pr_err 287 drivers/net/wan/lapbether.c pr_err("lapb_unregister error: %d\n", err); pr_err 342 drivers/net/wan/n2.c pr_err("invalid I/O port value\n"); pr_err 347 drivers/net/wan/n2.c pr_err("invalid IRQ value\n"); pr_err 352 drivers/net/wan/n2.c pr_err("invalid RAM value\n"); pr_err 363 drivers/net/wan/n2.c pr_err("unable to allocate memory\n"); pr_err 369 drivers/net/wan/n2.c pr_err("I/O port region in use\n"); pr_err 376 drivers/net/wan/n2.c pr_err("could not allocate IRQ\n"); pr_err 383 drivers/net/wan/n2.c pr_err("could not request RAM window\n"); pr_err 390 drivers/net/wan/n2.c pr_err("ioremap() failed\n"); pr_err 412 drivers/net/wan/n2.c pr_err("invalid window size\n"); pr_err 437 drivers/net/wan/n2.c pr_err("RAM test failed\n"); pr_err 538 drivers/net/wan/n2.c pr_err("invalid hardware parameters\n"); pr_err 327 drivers/net/wan/pc300too.c pr_err("invalid card EEPROM parameters\n"); pr_err 344 drivers/net/wan/pc300too.c pr_err("ioremap() failed\n"); pr_err 370 drivers/net/wan/pc300too.c pr_err("unable to allocate memory\n"); pr_err 418 drivers/net/wan/pc300too.c pr_err("RAM test failed\n"); pr_err 464 drivers/net/wan/pc300too.c pr_err("unable to register hdlc device\n"); pr_err 501 drivers/net/wan/pc300too.c pr_err("Invalid PCI clock frequency\n"); pr_err 505 drivers/net/wan/pc300too.c pr_err("Invalid 'use_crystal_clock' value\n"); pr_err 304 drivers/net/wan/pci200syn.c pr_err("unable to allocate memory\n"); pr_err 312 drivers/net/wan/pci200syn.c pr_err("invalid card EEPROM parameters\n"); pr_err 329 drivers/net/wan/pci200syn.c pr_err("ioremap() failed\n"); pr_err 360 drivers/net/wan/pci200syn.c pr_err("RAM test failed\n"); pr_err 397 drivers/net/wan/pci200syn.c pr_err("unable to register hdlc device\n"); pr_err 430 drivers/net/wan/pci200syn.c pr_err("Invalid PCI clock frequency\n"); pr_err 203 drivers/net/wan/sbni.c pr_err("base address 0x%lx is busy, or adapter is malfunctional!\n", pr_err 370 drivers/net/wan/sbni.c pr_err("%s: can't detect device irq!\n", dev->name); pr_err 383 drivers/net/wan/sbni.c pr_err("%s: unable to get memory!\n", dev->name); pr_err 1538 drivers/net/wan/sbni.c pr_err("Error in sbni kernel parameter!\n"); pr_err 189 drivers/net/wan/sealevel.c pr_err("unable to register HDLC device\n"); pr_err 290 drivers/net/wan/sealevel.c pr_err("Z8530 series device not found\n"); pr_err 584 drivers/net/wan/wanxl.c pr_err("No usable DMA configuration\n"); pr_err 630 drivers/net/wan/wanxl.c pr_err("No usable DMA configuration\n"); pr_err 640 drivers/net/wan/wanxl.c pr_err("ioremap() failed\n"); pr_err 709 drivers/net/wan/wanxl.c pr_err("ioremap() failed\n"); pr_err 768 drivers/net/wan/wanxl.c pr_err("%s: unable to allocate memory\n", pr_err 785 drivers/net/wan/wanxl.c pr_err("%s: unable to register hdlc device\n", pr_err 605 drivers/net/wan/x25_asy.c pr_err("%s: lapb_unregister error: %d\n", pr_err 544 drivers/net/wan/z85230.c pr_err("DMA tx - bogus event!\n"); pr_err 712 drivers/net/wan/z85230.c pr_err("IRQ re-enter\n"); pr_err 758 drivers/net/wan/z85230.c pr_err("%s: interrupt jammed - abort(0x%X)!\n", pr_err 2145 drivers/net/wireless/ath/ath10k/sdio.c pr_err("sdio driver registration failed: %d\n", ret); pr_err 1021 drivers/net/wireless/ath/ath9k/htc_drv_init.c pr_err("No USB devices found, driver not installed\n"); pr_err 502 drivers/net/wireless/ath/ath9k/htc_hst.c pr_err("Failed to initialize the device\n"); pr_err 1147 drivers/net/wireless/ath/ath9k/init.c pr_err("No PCI devices found, driver not installed\n"); pr_err 900 drivers/net/wireless/ath/ath9k/pci.c pr_err("32-bit DMA not available\n"); pr_err 906 drivers/net/wireless/ath/ath9k/pci.c pr_err("32-bit DMA consistent DMA enable failed\n"); pr_err 55 drivers/net/wireless/ath/main.c pr_err("skbuff alloc of size %u failed\n", len); pr_err 695 drivers/net/wireless/ath/regd.c pr_err("Invalid EEPROM contents\n"); pr_err 2234 drivers/net/wireless/broadcom/b43/main.c pr_err("Unable to load firmware\n"); pr_err 5625 drivers/net/wireless/broadcom/b43/main.c pr_err("Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1\n"); pr_err 356 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c pr_err("%s: %pV", func, &vaf); pr_err 27 drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c pr_err("%s: %pV", func, &vaf); pr_err 1237 drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c pr_err("%s: ieee80211_alloc_hw failed\n", __func__); pr_err 1249 drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c pr_err("%s: brcms_attach failed!\n", __func__); pr_err 1265 drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME, pr_err 1307 drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c pr_err("%s: register returned %d\n", __func__, error); pr_err 5635 drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c pr_err("unknown vendor id %04x\n", vendor); pr_err 5648 drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c pr_err("unknown device id %04x\n", device); pr_err 5659 drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c pr_err("unknown chip id %04x\n", chipinfo->id); pr_err 5671 drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c pr_err("unknown host type: %i\n", core->bus->hosttype); pr_err 3889 drivers/net/wireless/intel/iwlegacy/3945-mac.c pr_err("Unable to register rate control algorithm: %d\n", ret); pr_err 3895 drivers/net/wireless/intel/iwlegacy/3945-mac.c pr_err("Unable to initialize PCI module\n"); pr_err 6810 drivers/net/wireless/intel/iwlegacy/4965-mac.c pr_err("Unable to register rate control algorithm: %d\n", ret); pr_err 6816 drivers/net/wireless/intel/iwlegacy/4965-mac.c pr_err("Unable to initialize PCI module\n"); pr_err 1258 drivers/net/wireless/intel/iwlwifi/dvm/main.c pr_err("%s: Cannot allocate network device\n", cfg->name); pr_err 1331 drivers/net/wireless/intel/iwlwifi/dvm/main.c pr_err("Unsupported amsdu_size: %d\n", pr_err 2159 drivers/net/wireless/intel/iwlwifi/dvm/main.c pr_err("Unable to register rate control algorithm: %d\n", ret); pr_err 2165 drivers/net/wireless/intel/iwlwifi/dvm/main.c pr_err("Unable to register op_mode: %d\n", ret); pr_err 121 drivers/net/wireless/intel/iwlwifi/mvm/ops.c pr_err("Unable to register rate control algorithm: %d\n", ret); pr_err 127 drivers/net/wireless/intel/iwlwifi/mvm/ops.c pr_err("Unable to register MVM op_mode: %d\n", ret); pr_err 752 drivers/net/wireless/intel/iwlwifi/mvm/ops.c pr_err("%s: Unsupported amsdu_size: %d\n", KBUILD_MODNAME, pr_err 1258 drivers/net/wireless/intel/iwlwifi/pcie/drv.c pr_err("Unable to initialize PCI module\n"); pr_err 2132 drivers/net/wireless/marvell/libertas/cfg.c pr_err("cannot register wiphy device\n"); pr_err 2138 drivers/net/wireless/marvell/libertas/cfg.c pr_err("cannot register network device\n"); pr_err 631 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("can't download helper at 0x%x, ret %d\n", pr_err 659 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("helper firmware doesn't answer\n"); pr_err 673 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("could not download firmware\n"); pr_err 693 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("can't download firmware at 0x%x\n", sent); pr_err 700 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("firmware download failed\n"); pr_err 713 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("failed to find firmware (%d)\n", ret); pr_err 728 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("error in request_irq\n"); pr_err 742 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("could not activate card\n"); pr_err 796 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("wrong CIS (check number of IO windows)\n"); pr_err 821 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("error in pcmcia_loop_config\n"); pr_err 837 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("error in ioport_map\n"); pr_err 844 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("error in pcmcia_enable_device\n"); pr_err 859 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n", pr_err 870 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("8305 rev B0 and older are not supported\n"); pr_err 877 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("8381 rev B2 and older are not supported\n"); pr_err 883 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("8385 rev B0 and older are not supported\n"); pr_err 907 drivers/net/wireless/marvell/libertas/if_cs.c pr_err("failed to find firmware (%d)\n", ret); pr_err 391 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("problem fetching packet from firmware\n"); pr_err 424 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("error %d sending packet to firmware\n", ret); pr_err 529 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("failed to load helper firmware\n"); pr_err 661 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("failed to load firmware\n"); pr_err 673 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("failed to find firmware (%d)\n", ret); pr_err 1156 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("unable to identify card model\n"); pr_err 1195 drivers/net/wireless/marvell/libertas/if_sdio.c pr_err("unknown card model 0x%x\n", card->model); pr_err 307 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n", pr_err 406 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("Can't read bus mode register\n"); pr_err 529 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("failed to load helper firmware (err=%d)\n", err); pr_err 552 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("timed out waiting for host_int_status\n"); pr_err 562 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n", pr_err 618 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("Too many CRC errors encountered in firmware load.\n"); pr_err 647 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("firmware load wants fewer bytes than we have to offer\n"); pr_err 654 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("failed to confirm the firmware download\n"); pr_err 660 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("failed to load firmware (err=%d)\n", err); pr_err 1164 drivers/net/wireless/marvell/libertas/if_spi.c pr_err("can't get host irq line-- request_irq failed\n"); pr_err 173 drivers/net/wireless/marvell/libertas/if_usb.c pr_err("Download timed out\n"); pr_err 451 drivers/net/wireless/marvell/libertas/if_usb.c pr_err("No free skb\n"); pr_err 809 drivers/net/wireless/marvell/libertas/if_usb.c pr_err("firmware file format check FAIL\n"); pr_err 825 drivers/net/wireless/marvell/libertas/if_usb.c pr_err("failed to find firmware (%d)\n", ret); pr_err 862 drivers/net/wireless/marvell/libertas/main.c pr_err("Out of memory allocating command buffers\n"); pr_err 872 drivers/net/wireless/marvell/libertas/main.c pr_err("Out of memory allocating event FIFO buffer\n"); pr_err 917 drivers/net/wireless/marvell/libertas/main.c pr_err("cfg80211 init failed\n"); pr_err 927 drivers/net/wireless/marvell/libertas/main.c pr_err("failed to initialize adapter structure\n"); pr_err 1063 drivers/net/wireless/marvell/libertas/main.c pr_err("cannot register device\n"); pr_err 809 drivers/net/wireless/marvell/libertas/mesh.c pr_err("failed to create boot_opts_group.\n"); pr_err 813 drivers/net/wireless/marvell/libertas/mesh.c pr_err("failed to create mesh_ie_group.\n"); pr_err 1025 drivers/net/wireless/marvell/libertas/mesh.c pr_err("cannot register mshX virtual interface\n"); pr_err 122 drivers/net/wireless/marvell/libertas_tf/if_usb.c pr_err("Download timed out\n"); pr_err 420 drivers/net/wireless/marvell/libertas_tf/if_usb.c pr_err("No free skb\n"); pr_err 798 drivers/net/wireless/marvell/libertas_tf/if_usb.c pr_err("firmware file format check FAIL\n"); pr_err 820 drivers/net/wireless/marvell/libertas_tf/if_usb.c pr_err("request_firmware() failed with %#x\n", ret); pr_err 821 drivers/net/wireless/marvell/libertas_tf/if_usb.c pr_err("firmware %s not found\n", lbtf_fw_name); pr_err 249 drivers/net/wireless/marvell/libertas_tf/main.c pr_err("TX error: %d", err); pr_err 567 drivers/net/wireless/marvell/mwifiex/cmdevt.c pr_err("PREP_CMD: adapter is NULL\n"); pr_err 484 drivers/net/wireless/marvell/mwifiex/main.c pr_err("%s: adapter is NULL\n", __func__); pr_err 702 drivers/net/wireless/marvell/mwifiex/main.c pr_err("%s: fw_name too long!\n", __func__); pr_err 1541 drivers/net/wireless/marvell/mwifiex/main.c pr_err("Failed to bring up adapter: %d\n", ret); pr_err 1641 drivers/net/wireless/marvell/mwifiex/main.c pr_err("%s: software init failed\n", __func__); pr_err 1685 drivers/net/wireless/marvell/mwifiex/main.c pr_err("%s: failed to register mwifiex device\n", __func__); pr_err 1690 drivers/net/wireless/marvell/mwifiex/main.c pr_err("%s: firmware init failed\n", __func__); pr_err 266 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("%s failed\n", __func__); pr_err 2428 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("info: %s: card=%p adapter=%p\n", __func__, card, pr_err 2930 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("set_dma_mask(32) failed: %d\n", ret); pr_err 2936 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("set_consistent_dma_mask(64) failed\n"); pr_err 2942 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("req_reg(0) error\n"); pr_err 2947 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("iomap(0) error\n"); pr_err 2953 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("req_reg(2) error\n"); pr_err 2958 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("iomap(2) error\n"); pr_err 3070 drivers/net/wireless/marvell/mwifiex/pcie.c pr_err("request_irq failed: ret=%d\n", ret); pr_err 894 drivers/net/wireless/marvell/mwifiex/sdio.c pr_err("int: func=%p card=%p adapter=%p\n", pr_err 1420 drivers/net/wireless/marvell/mwifiex/tdls.c pr_err("mwifiex: %s: adapter or private structure is NULL\n", pr_err 173 drivers/net/wireless/marvell/mwifiex/usb.c pr_err("mwifiex adapter or card structure is not valid\n"); pr_err 513 drivers/net/wireless/marvell/mwifiex/usb.c pr_err("%s: mwifiex_add_card failed: %d\n", __func__, ret); pr_err 120 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u combination check: failed to set type %d\n", pr_err 134 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to change type to %d\n", pr_err 170 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to delete VIF\n", vif->mac->macid, pr_err 199 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u invalid combination: failed to add type %d\n", pr_err 209 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: no free VIF available\n", mac->macid); pr_err 221 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: unsupported IF type %d\n", mac->macid, type); pr_err 232 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to add VIF %pM\n", pr_err 238 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: FW reported bad MAC: %pM\n", pr_err 246 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to attach netdev\n", mac->macid, pr_err 326 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to start AP\n", vif->mac->macid, pr_err 341 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to stop AP operation in FW\n", pr_err 357 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: primary VIF is not configured\n", mac->macid); pr_err 363 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: failed to update PHY params\n", mac->macid); pr_err 517 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to add key: cipher=%x idx=%u pw=%u\n", pr_err 536 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to delete key: idx=%u pw=%u\n", pr_err 553 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to set dflt key: idx=%u uc=%u mc=%u\n", pr_err 569 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to set default MGMT key: idx=%u\n", pr_err 584 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to change STA %pM\n", pr_err 605 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to delete STA %pM\n", pr_err 623 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: failed to start scan\n", mac->macid); pr_err 648 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("can not offload authentication to userspace\n"); pr_err 659 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to connect\n", pr_err 683 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to report external auth\n", pr_err 702 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: primary VIF is not configured\n", mac->macid); pr_err 713 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("VIF%u.%u: failed to disconnect\n", pr_err 765 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("received stats for channel %d instead of %d\n", pr_err 813 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("%s: failed to get channel: %d\n", ndev->name, ret); pr_err 819 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("%s: bad channel freq=%u cf1=%u cf2=%u bw=%u\n", pr_err 842 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("%s: invalid channel\n", dev->name); pr_err 867 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("%s: failed to start CAC ret=%d\n", ndev->name, ret); pr_err 881 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("%s: failed to set mac ACL ret=%d\n", dev->name, ret); pr_err 895 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("%s: failed to set PM mode ret=%d\n", dev->name, ret); pr_err 909 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: primary VIF is not configured\n", mac->macid); pr_err 924 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: failed to set WoWLAN triggers\n", pr_err 941 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: primary VIF is not configured\n", mac->macid); pr_err 948 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: failed to reset WoWLAN triggers\n", pr_err 1013 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: failed to update region to %c%c: %d\n", pr_err 1024 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("MAC%u: failed to update band %u\n", pr_err 1084 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("invalid wiphy pointer\n"); pr_err 1202 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c pr_err("failed to send %s command to VIF%u.%u\n", pr_err 157 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("VIF%u.%u CMD %u: alloc failed\n", macid, vifid, cmd_no); pr_err 209 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("VIF%u.%u: can not fit AP settings: %u\n", pr_err 705 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("VIF%u.%u: wrong mac in reply: %pM != %pM\n", pr_err 752 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("VIF%u.%u: unsupported type %d\n", vif->mac->macid, pr_err 1194 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("MAC%u: combination mismatch: reported=%zu parsed=%zu\n", pr_err 1200 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("MAC%u: ext_capa/_mask lengths mismatch: %u != %u\n", pr_err 1254 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("could not get valid base vif\n"); pr_err 1354 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("invalid channel TLV len %zu\n", pr_err 1360 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("too many channel TLVs\n"); pr_err 1432 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("bad HTCAP TLV len %zu\n", tlv_dlen); pr_err 1441 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("bad VHTCAP TLV len %zu\n", tlv_dlen); pr_err 1458 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("malformed TLV buf; bytes left: %zu\n", payload_len); pr_err 1463 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("channel count mismatch: reported=%d, parsed=%d\n", pr_err 1526 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("MAC%u: Unknown TLV type: %#x\n", mac->macid, pr_err 1567 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("invalid CHANNEL_STATS entry size\n"); pr_err 1686 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("MAC%u: reply band %u != cmd band %u\n", mac->macid, pr_err 1998 drivers/net/wireless/quantenna/qtnfmac/commands.c pr_err("unsupported iftype %d\n", vif->wdev.iftype); pr_err 37 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("invalid MAC index %u\n", macid); pr_err 44 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: not initialized\n", macid); pr_err 169 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("Tx timeout threshold exceeded !\n"); pr_err 170 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("schedule interface %s reset !\n", netdev_name(ndev)); pr_err 224 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: band %u: failed to get chans info: %d\n", pr_err 550 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u allocation failed\n", macid); pr_err 556 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: failed to get info\n", macid); pr_err 562 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: primary VIF is not ready\n", macid); pr_err 570 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: failed to add VIF\n", macid); pr_err 576 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: failed to get PHY settings\n", macid); pr_err 582 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: failed to init bands\n", macid); pr_err 588 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: wiphy registration failed\n", macid); pr_err 600 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: failed to attach netdev\n", macid); pr_err 625 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("failed to alloc main workqueue\n"); pr_err 632 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("failed to alloc high prio workqueue\n"); pr_err 641 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("failed to init FW: %d\n", ret); pr_err 648 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("failed to get HW info: %d\n", ret); pr_err 653 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("qlink version mismatch %u != %u\n", pr_err 660 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("no support for number of MACs=%u\n", pr_err 670 drivers/net/wireless/quantenna/qtnfmac/core.c pr_err("MAC%u: attach failed: %d\n", i, ret); pr_err 33 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: payload is too short (%u < %zu)\n", pr_err 39 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: STA_ASSOC event when not in AP mode\n", pr_err 118 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: payload is too short (%u < %zu)\n", pr_err 125 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: STA_DEAUTH event when not in AP mode\n", pr_err 162 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: payload is too short (%u < %zu)\n", pr_err 169 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: BSS_JOIN event when not in STA mode\n", pr_err 309 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: payload is too short (%u < %zu)\n", pr_err 316 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: BSS_LEAVE event when not in STA mode\n", pr_err 342 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: payload is too short (%u < %zu)\n", pr_err 377 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: payload is too short\n", vif->mac->macid, pr_err 384 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("VIF%u.%u: channel at %u MHz not found\n", pr_err 454 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("MAC%u: payload is too short\n", mac->macid); pr_err 474 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("MAC%u: payload is too short\n", mac->macid); pr_err 484 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("MAC%u: bad channel freq=%u cf1=%u cf2=%u bw=%u\n", pr_err 524 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("MAC%u: payload is too short\n", vif->mac->macid); pr_err 534 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("MAC%u: bad channel f1=%u f2=%u bw=%u\n", pr_err 594 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("MAC%u: payload is too short\n", vif->mac->macid); pr_err 637 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("invalid vif(%u)\n", event->vifid); pr_err 699 drivers/net/wireless/quantenna/qtnfmac/event.c pr_err("invalid event buffer\n"); pr_err 58 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("EP firmware is dead\n"); pr_err 140 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to attach core\n"); pr_err 180 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to set mps to %d, keep using current %d\n", pr_err 249 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to allocate skb\n"); pr_err 285 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("device %s is not PCI Express\n", pci_name(pdev)); pr_err 293 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to init PCI device %x\n", pdev->device); pr_err 301 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to map BAR%u\n", QTN_SYSCTL_BAR); pr_err 307 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to map BAR%u\n", QTN_DMA_BAR); pr_err 313 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to map BAR%u\n", QTN_SHMEM_BAR); pr_err 331 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("unsupported chip ID 0x%x\n", chipid); pr_err 365 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("failed to alloc bus workqueue\n"); pr_err 372 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c pr_err("PCIE DMA coherent mask init failed 0x%llx\n", pr_err 302 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("skb DMA mapping error: %pad\n", &paddr); pr_err 424 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("rx_bd_size_param %u is not power of two\n", pr_err 431 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("rx_bd_size_param %u is too large\n", pr_err 438 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to init h/w queues\n"); pr_err 444 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to allocate skb array\n"); pr_err 450 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to allocate bd table\n"); pr_err 456 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to allocate rx buffers\n"); pr_err 564 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("skb DMA mapping error: %pad\n", &skb_paddr); pr_err 710 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("skip packet with invalid length: %u > %u\n", pr_err 756 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to allocate new rx_skb[%d]\n", pr_err 926 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("FW upload failed: too many retries\n"); pr_err 941 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("FW upload failed: SYNC timed out\n"); pr_err 994 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to get firmware %s\n", fwname); pr_err 1003 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("card is not ready\n"); pr_err 1022 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("firmware upload error\n"); pr_err 1029 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("firmware bringup timed out\n"); pr_err 1035 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("firmware runtime failure\n"); pr_err 1086 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("PCIE xfer init failed\n"); pr_err 1100 drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c pr_err("failed to request pcie irq %d\n", pdev->irq); pr_err 262 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("skb mapping error: %pad\n", &paddr); pr_err 361 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to allocate skb array\n"); pr_err 367 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to allocate bd table\n"); pr_err 373 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to allocate rx buffers\n"); pr_err 644 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("skip packet with invalid length: %u > %u\n", pr_err 696 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to allocate new rx_skb[%d]\n", pr_err 825 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("card endianness detection timed out\n"); pr_err 855 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to detect card endianness\n"); pr_err 875 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("card is not ready to boot...\n"); pr_err 930 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to allocate DMA buffer for FW upload\n"); pr_err 941 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("card is not ready to download FW\n"); pr_err 960 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("confirmation for block #%d timed out\n", count); pr_err 976 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("confirmation for the last block timed out\n"); pr_err 985 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("confirmation for FW upload completion timed out\n"); pr_err 1009 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("%s: card is not ready\n", fwname); pr_err 1017 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("%s: request_firmware error %d\n", fwname, ret); pr_err 1025 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("%s: FW upload error\n", fwname); pr_err 1071 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("FW bringup timed out\n"); pr_err 1080 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("card bringup timed out\n"); pr_err 1087 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("FW runtime failure\n"); pr_err 1138 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to request pcie irq %d\n", pdev->irq); pr_err 1146 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("failed to init card\n"); pr_err 1152 drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c pr_err("PCIE xfer init failed\n"); pr_err 30 drivers/net/wireless/quantenna/qtnfmac/shm_ipc.c pr_err("wrong rx packet size: %zu\n", size); pr_err 155 drivers/net/wireless/quantenna/qtnfmac/shm_ipc.c pr_err("TX ACK timeout\n"); pr_err 57 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_err("response timeout\n"); pr_err 90 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_err("unexpected response\n"); pr_err 95 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_err("seq num mismatch\n"); pr_err 161 drivers/net/wireless/quantenna/qtnfmac/trans.c pr_err("invalid bus pointer\n"); pr_err 6386 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c pr_err(DRIVER_NAME ": usb_register() failed (%i)\n", res); pr_err 369 drivers/net/wireless/realtek/rtlwifi/base.c pr_err("Err BAND %d\n", pr_err 452 drivers/net/wireless/realtek/rtlwifi/base.c pr_err("Failed to allocate work queue\n"); pr_err 539 drivers/net/wireless/realtek/rtlwifi/base.c pr_err("REGD init failed\n"); pr_err 2202 drivers/net/wireless/realtek/rtlwifi/base.c pr_err("AP off, try to reconnect now\n"); pr_err 2536 drivers/net/wireless/realtek/rtlwifi/base.c pr_err("Unknown Scan Backup operation.\n"); pr_err 2751 drivers/net/wireless/realtek/rtlwifi/base.c pr_err("rtl: Unable to register rtl_rc, use default RC !!\n"); pr_err 267 drivers/net/wireless/realtek/rtlwifi/cam.c pr_err("sta_addr is NULL.\n"); pr_err 279 drivers/net/wireless/realtek/rtlwifi/cam.c pr_err("-----hwsec_cam_bitmap: 0x%x entry_idx=%d\n", pr_err 299 drivers/net/wireless/realtek/rtlwifi/cam.c pr_err("sta_addr is NULL.\n"); pr_err 304 drivers/net/wireless/realtek/rtlwifi/cam.c pr_err("sta_addr is %pM\n", sta_addr); pr_err 92 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("Selected firmware is not available\n"); pr_err 98 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("Firmware is too big!\n"); pr_err 289 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("operation mode %d is not supported!\n", pr_err 761 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("switch case %#x not processed\n", pr_err 1419 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("IEEE80211_AMPDU_ERR!!!!:\n"); pr_err 1566 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("alg_err:%x!!!!:\n", key->cipher); pr_err 1693 drivers/net/wireless/realtek/rtlwifi/core.c pr_err("cmd_err:%x!!!!:\n", cmd); pr_err 1230 drivers/net/wireless/realtek/rtlwifi/efuse.c pr_err("RTL8XXX did not boot from eeprom, check it !!\n"); pr_err 146 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("switch case %#x not processed\n", pr_err 1226 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Cannot allocate TX ring (prio = %d)\n", pr_err 1243 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Cannot allocate TX ring (prio = %d)\n", prio); pr_err 1290 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Cannot allocate RX ring\n"); pr_err 1313 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Cannot allocate RX ring\n"); pr_err 1765 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("tx ring initialization failed\n"); pr_err 2273 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Can't init_sw_vars\n"); pr_err 2285 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Can't allocate sw for mac80211\n"); pr_err 2292 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Failed to init PCI\n"); pr_err 2298 drivers/net/wireless/realtek/rtlwifi/pci.c pr_err("Can't register mac80211 hw.\n"); pr_err 139 drivers/net/wireless/realtek/rtlwifi/ps.c pr_err("switch case %#x not processed\n", state_toset); pr_err 51 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c pr_err("Page numbers should not greater then 8\n"); pr_err 79 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n", pr_err 100 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", pr_err 149 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c pr_err("Firmware is not ready to run!\n"); pr_err 218 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c pr_err("Write H2C fail because no trigger for FW INT!\n"); pr_err 343 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 556 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("switch case %#x not processed\n", pr_err 720 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 741 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("Failed to polling write LLT done at address %d!\n", pr_err 1228 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("Network type %d not support!\n", type); pr_err 1961 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("Autoload ERR!!\n"); pr_err 2326 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("switch case %#x not processed\n", pr_err 2345 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 157 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("return all one\n"); pr_err 201 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("stop\n"); pr_err 354 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 364 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("BB_PG Reg Fail!!\n"); pr_err 370 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("AGC Table Fail\n"); pr_err 1076 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("Unknown Scan Backup operation.\n"); pr_err 1117 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 1142 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 1283 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c pr_err("Invalid 'stage' = %d, Check it!\n", pr_err 32 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 70 drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c pr_err("Page numbers should not greater then 4\n"); pr_err 102 drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n", pr_err 122 drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c pr_err("Polling FW ready fail! REG_MCUFWDL:0x%08x.\n", pr_err 163 drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c pr_err("Firmware is not ready to run!\n"); pr_err 234 drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c pr_err("Write H2C fail because no trigger for FW INT!\n"); pr_err 85 drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c pr_err("return all one\n"); pr_err 133 drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c pr_err("stop\n"); pr_err 190 drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c pr_err("Write BB Reg Fail!!\n"); pr_err 203 drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c pr_err("BB_PG Reg Fail!!\n"); pr_err 209 drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c pr_err("AGC Table Fail\n"); pr_err 842 drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c pr_err("Invalid 'stage' = %d, Check it!\n", pr_err 121 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 346 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("switch case %#x not processed\n", pr_err 533 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("switch case %d not processed\n", variable); pr_err 554 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("Failed to polling write LLT done at address %d!\n", pr_err 942 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("Init MAC failed\n"); pr_err 1121 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("ERROR RF_Type is set!!\n"); pr_err 1170 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("Network type %d not supported!\n", type); pr_err 1750 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("Autoload ERR!!\n"); pr_err 2121 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("switch case %#x not processed\n", pr_err 2140 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 38 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c pr_err("switch case %#x not processed\n", pr_err 345 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 527 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c pr_err("switch case %#x not processed\n", pr_err 32 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 136 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c pr_err("Can't alloc buffer for fw\n"); pr_err 155 drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c pr_err("Failed to request firmware!\n"); pr_err 432 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n"); pr_err 465 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n"); pr_err 821 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("Failed to init power on!\n"); pr_err 832 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("Failed to init LLT Table!\n"); pr_err 956 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("init mac failed!\n"); pr_err 1070 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("8051 reset failed!.........................\n"); pr_err 1311 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("Network type %d not supported!\n", type); pr_err 1527 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 1901 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 40 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c pr_err("switch case %#x not processed\n", pr_err 72 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c pr_err("switch case %#x not processed\n", pr_err 137 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n", pr_err 162 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("===> %s #1 fail\n", __func__); pr_err 169 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("===> %s #2 fail\n", __func__); pr_err 180 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("===> %s #3 fail\n", __func__); pr_err 187 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("===> %s #4 fail\n", __func__); pr_err 243 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("illegal switch case\n"); pr_err 260 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c pr_err("Can not find free hw security cam entry\n"); pr_err 255 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c pr_err("switch case %#x not processed\n", rfpath); pr_err 294 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 316 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 489 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c pr_err("switch case %#x not processed\n", pr_err 32 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 46 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c pr_err("Can't alloc buffer for fw\n"); pr_err 56 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c pr_err("Page numbers should not greater then 8\n"); pr_err 80 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n", pr_err 251 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c pr_err("fw is not ready to run!\n"); pr_err 326 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c pr_err("Write H2C fail because no trigger for FW INT!\n"); pr_err 348 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c pr_err("switch case %#x not processed\n", pr_err 425 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c pr_err("switch case %#x not processed\n", pr_err 144 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 338 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("switch case %#x not processed\n", pr_err 479 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 498 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("Failed to polling write LLT done at address %d!\n", pr_err 897 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("Init MAC failed\n"); pr_err 1096 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("Network type %d not supported!\n", type); pr_err 1702 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("Unknown CUT!\n"); pr_err 1786 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("Autoload ERR!!\n"); pr_err 2139 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("switch case %#x not processed\n", pr_err 2156 drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 47 drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c pr_err("switch case %#x not processed\n", pr_err 81 drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c pr_err("switch case %#x not processed\n", pr_err 697 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 712 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("BB_PG Reg Fail!!\n"); pr_err 718 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("AGC Table Fail\n"); pr_err 814 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("switch case %#x not processed\n", rfpath); pr_err 967 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 999 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 2822 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("switch case %#x not processed\n", pr_err 2935 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("switch case %#x not processed\n", pr_err 2966 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("switch case %#x not processed\n", pr_err 3154 drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c pr_err("switch case %#x not processed\n", pr_err 44 drivers/net/wireless/realtek/rtlwifi/rtl8192de/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 151 drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c pr_err("Can't alloc buffer for fw\n"); pr_err 164 drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c pr_err("Failed to request firmware!\n"); pr_err 47 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c pr_err("Page numbers should not greater then 8\n"); pr_err 76 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n", pr_err 97 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x. count = %d\n", pr_err 1319 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c pr_err("Init MAC failed\n"); pr_err 1484 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c pr_err("Network type %d not support!\n", type); pr_err 2209 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c pr_err("Autoload ERR!!\n"); pr_err 2488 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 151 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("return all one\n"); pr_err 195 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("stop\n"); pr_err 631 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 643 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("BB_PG Reg Fail!!\n"); pr_err 648 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("AGC Table Fail\n"); pr_err 1656 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("Unknown Scan Backup operation.\n"); pr_err 1697 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 1722 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 1864 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c pr_err("Invalid 'stage' = %d, Check it!\n", pr_err 36 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 145 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c pr_err("Can't alloc buffer for fw\n"); pr_err 158 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c pr_err("Failed to request firmware!\n"); pr_err 94 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Unknown RF type(%x)\n", rtlphy->rf_type); pr_err 147 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Size over FIRMWARE_CODE_SIZE!\n"); pr_err 214 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n", pr_err 231 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n", pr_err 239 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Enable CPU fail!\n"); pr_err 254 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Polling DMEM code done fail ! cpustatus(%#x)\n", pr_err 279 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Polling Load Firmware ready fail ! cpustatus(%x)\n", pr_err 301 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Unknown status check!\n"); pr_err 349 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("memory for data image is less than IMEM required\n"); pr_err 361 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("memory for data image is less than EMEM required\n"); pr_err 395 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("Unexpected Download step!!\n"); pr_err 404 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("fail!\n"); pr_err 411 drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c pr_err("rtl8192se: firmware fail!\n"); pr_err 57 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 273 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("switch case %#x not processed\n", pr_err 409 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("switch case %#x not processed\n", variable); pr_err 472 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("wait for BIT(6) return value %x\n", tmpvalue); pr_err 722 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n", pr_err 979 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("MAC Config failed\n"); pr_err 999 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("BB Config failed\n"); pr_err 1169 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("Network type %d not supported!\n", type); pr_err 1283 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("wait for BIT(6) return value %x\n", tmp); pr_err 1342 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("Switch ctrl path fail\n"); pr_err 1658 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("RTL819X Not boot from eeprom, check it !!\n"); pr_err 2002 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("Autoload ERR!!\n"); pr_err 2435 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("switch case %#x not processed\n", pr_err 2453 drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 45 drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c pr_err("switch case %#x not processed\n", pr_err 80 drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c pr_err("switch case %#x not processed\n", pr_err 227 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("Unknown operation\n"); pr_err 267 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 292 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 416 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("switch case %#x not processed\n", pr_err 622 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("switch case %#x not processed\n", pr_err 915 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 928 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n"); pr_err 936 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("%s(): AGC Table Fail\n", __func__); pr_err 1053 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("RF_Type(%x) does not match RF_Num(%x)!!\n", pr_err 1055 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("path1 0x%x, path2 0x%x, pathmap 0x%x\n", pr_err 1195 drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c pr_err("Set FW Cmd fail!!\n"); pr_err 473 drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c pr_err("Radio[%d] Fail!!\n", rfpath); pr_err 504 drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 73 drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c pr_err("Firmware %s not available\n", fw_name); pr_err 78 drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c pr_err("Firmware is too big!\n"); pr_err 195 drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c pr_err("Failed to request firmware!\n"); pr_err 80 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c pr_err("Write H2C fail because no trigger for FW INT!\n"); pr_err 103 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c pr_err("switch case %#x not processed\n", pr_err 209 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c pr_err("switch case %#x not processed\n", pr_err 551 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c pr_err("Failed to polling write LLT done at address %d!\n", pr_err 938 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c pr_err("Init MAC failed\n"); pr_err 1084 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c pr_err("Chip Version ID: Unknown. Bug?\n"); pr_err 1133 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c pr_err("Network type %d not support!\n", type); pr_err 1827 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c pr_err("Autoload ERR!!\n"); pr_err 2219 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 39 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c pr_err("switch case %#x not processed\n", pr_err 80 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c pr_err("switch case %#x not processed\n", pr_err 194 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 208 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("BB_PG Reg Fail!!\n"); pr_err 214 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("AGC Table Fail\n"); pr_err 727 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("Unknown Scan Backup operation.\n"); pr_err 768 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 793 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 954 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c pr_err("Invalid 'stage' = %d, Check it!\n", pr_err 32 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 148 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c pr_err("Can't alloc buffer for fw.\n"); pr_err 161 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c pr_err("Failed to request firmware!\n"); pr_err 78 drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c pr_err("Write H2C fail because no trigger for FW INT!\n"); pr_err 101 drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c pr_err("switch case %#x not processed\n", pr_err 174 drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c pr_err("switch case %#x not processed\n", pr_err 730 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c pr_err("Failed to polling write LLT done at address %d!\n", pr_err 1368 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c pr_err("Init MAC failed\n"); pr_err 1519 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c pr_err("Network type %d not support!\n", type); pr_err 2273 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c pr_err("Autoload ERR!!\n"); pr_err 2608 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c pr_err("Can not find free hw security cam entry\n"); pr_err 38 drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c pr_err("switch case %#x not processed\n", pr_err 79 drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c pr_err("switch case %#x not processed\n", pr_err 512 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 523 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("BB_PG Reg Fail!!\n"); pr_err 529 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("AGC Table Fail\n"); pr_err 1177 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("Unknown Scan Backup operation.\n"); pr_err 1218 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 1243 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 1389 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c pr_err("Invalid 'stage' = %d, Check it!\n", pr_err 32 drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 155 drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c pr_err("Can't alloc buffer for fw.\n"); pr_err 165 drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c pr_err("Failed to request firmware!\n"); pr_err 52 drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c pr_err("Page numbers should not greater than %d\n", pr_err 131 drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c pr_err("chksum report fail ! REG_MCUFWDL:0x%08x .\n", pr_err 157 drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", pr_err 213 drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c pr_err("Firmware is not ready to run!\n"); pr_err 80 drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c pr_err("return all one\n"); pr_err 128 drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c pr_err("stop\n"); pr_err 50 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c pr_err("Page numbers should not greater then 8\n"); pr_err 99 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", pr_err 804 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c pr_err("Failed to polling write LLT done at address %d!\n", pr_err 1899 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c pr_err("Init MAC failed\n"); pr_err 2146 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c pr_err("Network type %d not support!\n", type); pr_err 3284 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c pr_err("Autoload ERR!!\n"); pr_err 3888 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c pr_err("an not find free hwsecurity cam entry\n"); pr_err 203 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("return all one\n"); pr_err 264 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("stop\n"); pr_err 1818 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("Write BB Reg Fail!!\n"); pr_err 1827 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("BB_PG Reg Fail!!\n"); pr_err 1841 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("AGC Table Fail\n"); pr_err 2105 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("switch case %#x not processed\n", rfpath); pr_err 2135 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("switch case %#x not processed\n", rfpath); pr_err 3338 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("Unknown Scan Backup operation.\n"); pr_err 3379 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("SCMapping: Not Correct Primary40MHz Setting\n"); pr_err 3394 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("SCMapping: Not Correct Primary40MHz Setting\n"); pr_err 3401 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("SCMapping: Not Correct Primary40MHz Setting\n"); pr_err 3477 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("unknown bandwidth: %#X\n", pr_err 4659 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("switch case %#x not processed\n", pr_err 4703 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("switch case %#x not processed\n", pr_err 4809 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c pr_err("switch case %#x not processed\n", pr_err 29 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c pr_err("unknown bandwidth: %#X\n", bandwidth); pr_err 168 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c pr_err("Can't alloc buffer for fw.\n"); pr_err 173 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c pr_err("Can't alloc buffer for wowlan fw.\n"); pr_err 194 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c pr_err("Failed to request normal firmware!\n"); pr_err 206 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c pr_err("Failed to request wowlan firmware!\n"); pr_err 117 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x\n", pr_err 346 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Too few input end points found\n"); pr_err 350 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("No output end points found\n"); pr_err 408 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Failed to usb_alloc_coherent!!\n"); pr_err 548 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("rx agg not supported\n"); pr_err 606 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Too short packet from bulk IN! (len: %d)\n", pr_err 613 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Pending RX skbuff queue full! (qlen: %d)\n", pr_err 623 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Can't allocate skb for bulk IN!\n"); pr_err 714 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Failed to prep_rx_urb!!\n"); pr_err 829 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Failed to submit urb\n"); pr_err 850 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Urb has error status 0x%X\n", urb->status); pr_err 905 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("USB device is stopping...\n"); pr_err 913 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Can't allocate urb. Drop skb!\n"); pr_err 1062 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Can't allocate sw for mac80211\n"); pr_err 1066 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Can't init_sw_vars\n"); pr_err 1073 drivers/net/wireless/realtek/rtlwifi/usb.c pr_err("Can't register mac80211 hw.\n"); pr_err 119 drivers/net/wireless/st/cw1200/bh.c pr_err("[BH] wakeup failed (BH error)\n"); pr_err 188 drivers/net/wireless/st/cw1200/bh.c pr_err("[BH] Failed to read control register.\n"); pr_err 288 drivers/net/wireless/st/cw1200/bh.c pr_err("rx blew up, len %zu\n", alloc_len); pr_err 398 drivers/net/wireless/st/cw1200/bh.c pr_err("tx blew up, len %zu\n", tx_len); pr_err 611 drivers/net/wireless/st/cw1200/bh.c pr_err("[BH] Fatal error, exiting.\n"); pr_err 220 drivers/net/wireless/st/cw1200/cw1200_sdio.c pr_err("power_ctrl() failed!\n"); pr_err 228 drivers/net/wireless/st/cw1200/cw1200_sdio.c pr_err("clk_ctrl() failed!\n"); pr_err 290 drivers/net/wireless/st/cw1200/cw1200_sdio.c pr_err("Can't allocate SDIO hwbus_priv.\n"); pr_err 357 drivers/net/wireless/st/cw1200/cw1200_sdio.c pr_err("Error setting SDIO pm flags: %i\n", ret); pr_err 315 drivers/net/wireless/st/cw1200/cw1200_spi.c pr_err("power_ctrl() failed!\n"); pr_err 323 drivers/net/wireless/st/cw1200/cw1200_spi.c pr_err("clk_ctrl() failed!\n"); pr_err 389 drivers/net/wireless/st/cw1200/cw1200_spi.c pr_err("spi_on() failed!\n"); pr_err 394 drivers/net/wireless/st/cw1200/cw1200_spi.c pr_err("spi_setup() failed!\n"); pr_err 400 drivers/net/wireless/st/cw1200/cw1200_spi.c pr_err("Can't allocate SPI hwbus_priv."); pr_err 120 drivers/net/wireless/st/cw1200/fwio.c pr_err("Invalid silicon revision %d.\n", priv->hw_revision); pr_err 147 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't load firmware file %s.\n", fw_path); pr_err 153 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't allocate firmware load buffer.\n"); pr_err 167 drivers/net/wireless/st/cw1200/fwio.c pr_err("Bootloader is not ready.\n"); pr_err 187 drivers/net/wireless/st/cw1200/fwio.c pr_err("Bootloader reported error %d.\n", val32); pr_err 202 drivers/net/wireless/st/cw1200/fwio.c pr_err("Timeout waiting for FIFO.\n"); pr_err 224 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't write firmware block @ %d!\n", pr_err 242 drivers/net/wireless/st/cw1200/fwio.c pr_err("Wait for download completion failed: 0x%.8X\n", val32); pr_err 313 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't read config register.\n"); pr_err 318 drivers/net/wireless/st/cw1200/fwio.c pr_err("Bad config register value (0x%08x)\n", val32); pr_err 325 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't deduce hardware type.\n"); pr_err 334 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't write DPLL register.\n"); pr_err 343 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't read DPLL register.\n"); pr_err 348 drivers/net/wireless/st/cw1200/fwio.c pr_err("Unable to initialise DPLL register. Wrote 0x%.8X, Read 0x%.8X.\n", pr_err 357 drivers/net/wireless/st/cw1200/fwio.c pr_err("set_wakeup: can't read control register.\n"); pr_err 364 drivers/net/wireless/st/cw1200/fwio.c pr_err("set_wakeup: can't write control register.\n"); pr_err 373 drivers/net/wireless/st/cw1200/fwio.c pr_err("wait_for_wakeup: can't read control register.\n"); pr_err 384 drivers/net/wireless/st/cw1200/fwio.c pr_err("wait_for_wakeup: device is not responding.\n"); pr_err 394 drivers/net/wireless/st/cw1200/fwio.c pr_err("HW detection: can't read CUT ID.\n"); pr_err 419 drivers/net/wireless/st/cw1200/fwio.c pr_err("(1) HW detection: can't read CUT ID\n"); pr_err 424 drivers/net/wireless/st/cw1200/fwio.c pr_err("(2) HW detection: can't read CUT ID.\n"); pr_err 430 drivers/net/wireless/st/cw1200/fwio.c pr_err("(3) HW detection: can't read CUT ID.\n"); pr_err 450 drivers/net/wireless/st/cw1200/fwio.c pr_err("Unsupported silicon major revision %d.\n", pr_err 459 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't read config register.\n"); pr_err 464 drivers/net/wireless/st/cw1200/fwio.c pr_err("Device is already in QUEUE mode!\n"); pr_err 472 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't handle CW1160/1260 firmware load yet.\n"); pr_err 479 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't perform firmware load for hw type %d.\n", pr_err 485 drivers/net/wireless/st/cw1200/fwio.c pr_err("Firmware load error.\n"); pr_err 499 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't read config register.\n"); pr_err 504 drivers/net/wireless/st/cw1200/fwio.c pr_err("Can't write config register.\n"); pr_err 38 drivers/net/wireless/st/cw1200/hwio.c pr_err("buffer is not aligned.\n"); pr_err 136 drivers/net/wireless/st/cw1200/hwio.c pr_err("error :[%d]\n", ret); pr_err 163 drivers/net/wireless/st/cw1200/hwio.c pr_err("error :[%d]\n", ret); pr_err 178 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't read more than 0xfff words.\n"); pr_err 186 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write address register.\n"); pr_err 193 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't read config register.\n"); pr_err 201 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write prefetch bit.\n"); pr_err 209 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't check prefetch bit.\n"); pr_err 219 drivers/net/wireless/st/cw1200/hwio.c pr_err("Prefetch bit is not cleared.\n"); pr_err 226 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't read data port.\n"); pr_err 241 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write more than 0xfff words.\n"); pr_err 250 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write address register.\n"); pr_err 258 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write data port.\n"); pr_err 276 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't read config register.\n"); pr_err 287 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write config register.\n"); pr_err 293 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't read control register.\n"); pr_err 304 drivers/net/wireless/st/cw1200/hwio.c pr_err("Can't write control register.\n"); pr_err 420 drivers/net/wireless/st/cw1200/main.c pr_err("Cannot init PM. (%d).\n", pr_err 428 drivers/net/wireless/st/cw1200/main.c pr_err("Cannot register device (%d).\n", pr_err 507 drivers/net/wireless/st/cw1200/main.c pr_err("Unknown Refclk freq (0x%04x), using 26000KHz\n", pr_err 563 drivers/net/wireless/st/cw1200/main.c pr_err("Timeout waiting on device startup\n"); pr_err 977 drivers/net/wireless/st/cw1200/sta.c pr_err("Unhandled WSM Error from LMAC\n"); pr_err 1145 drivers/net/wireless/st/cw1200/sta.c pr_err("Can't load sdd file %s.\n", priv->sdd_path); pr_err 1338 drivers/net/wireless/st/cw1200/sta.c pr_err("[STA] cw1200_join_work: wsm_join failed!\n"); pr_err 1138 drivers/net/wireless/st/cw1200/wsm.c pr_err("CMD req (0x%04x) stuck in firmware, killing BH\n", priv->wsm_cmd.cmd); pr_err 1141 drivers/net/wireless/st/cw1200/wsm.c pr_err("Outstanding outgoing frames: %d\n", priv->hw_bufs_used); pr_err 1197 drivers/net/wireless/st/cw1200/wsm.c pr_err("[WSM] Fatal error occurred, will not flush TX.\n"); pr_err 51 drivers/net/wireless/ti/wlcore/debug.h pr_err(DRIVER_PREFIX "ERROR " fmt "\n", ##arg) pr_err 719 drivers/net/xen-netback/xenbus.c pr_err("Failed to set watcher %s\n", vif->credit_watch.node); pr_err 762 drivers/net/xen-netback/xenbus.c pr_err("Failed to allocate memory for watch\n"); pr_err 771 drivers/net/xen-netback/xenbus.c pr_err("Failed to set watcher %s\n", pr_err 111 drivers/nfc/mei_phy.c pr_err("Could not send IF version cmd\n"); pr_err 125 drivers/nfc/mei_phy.c pr_err("Could not read IF version\n"); pr_err 179 drivers/nfc/mei_phy.c pr_err("Could not send connect cmd %d\n", r); pr_err 187 drivers/nfc/mei_phy.c pr_err("Could not read connect response %d\n", r); pr_err 236 drivers/nfc/mei_phy.c pr_err("NFC MEI command timeout\n"); pr_err 330 drivers/nfc/mei_phy.c pr_err("Could not enable device %d\n", r); pr_err 336 drivers/nfc/mei_phy.c pr_err("Could not enable device %d\n", r); pr_err 342 drivers/nfc/mei_phy.c pr_err("Could not connect to device %d\n", r); pr_err 348 drivers/nfc/mei_phy.c pr_err("Event cb registration failed %d\n", r); pr_err 85 drivers/nfc/microread/i2c.c pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]); pr_err 31 drivers/nfc/microread/mei.c pr_err("Cannot allocate memory for microread mei phy.\n"); pr_err 546 drivers/nfc/microread/microread.c pr_err("Failed to handle discovered target err=%d\n", r); pr_err 686 drivers/nfc/microread/microread.c pr_err("Cannot allocate nfc hdev\n"); pr_err 91 drivers/nfc/nfcmrvl/fw_dnld.c pr_err("no memory for data\n"); pr_err 179 drivers/nfc/nfcmrvl/i2c.c pr_err("Failed to get generic entries\n"); pr_err 190 drivers/nfc/nfcmrvl/i2c.c pr_err("Unable to get irq, error: %d\n", ret); pr_err 271 drivers/nfc/nfcmrvl/main.c pr_err("invalid reset-n-io GPIO\n"); pr_err 127 drivers/nfc/nfcmrvl/spi.c pr_err("Failed to get generic entries\n"); pr_err 133 drivers/nfc/nfcmrvl/spi.c pr_err("Unable to get irq, error: %d\n", ret); pr_err 85 drivers/nfc/nfcmrvl/uart.c pr_err("Failed to get generic entries\n"); pr_err 342 drivers/nfc/nfcsim.c pr_err("Could not create debugfs entry\n"); pr_err 410 drivers/nfc/nfcsim.c pr_err("Could not register digital device (%d)\n", rc); pr_err 474 drivers/nfc/nfcsim.c pr_err("Failed to initialize nfcsim driver (%d)\n", rc); pr_err 2027 drivers/nfc/pn533/pn533.c pr_err("NULL Frame -> link is dead\n"); pr_err 339 drivers/nfc/pn544/i2c.c pr_err("CRC error 0x%x != 0x%x 0x%x\n", pr_err 29 drivers/nfc/pn544/mei.c pr_err("Cannot allocate memory for pn544 mei phy.\n"); pr_err 947 drivers/nfc/pn544/pn544.c pr_err("Cannot allocate nfc hdev\n"); pr_err 137 drivers/nfc/st-nci/core.c pr_err("Cannot allocate nfc ndev\n"); pr_err 146 drivers/nfc/st-nci/core.c pr_err("Cannot register proprietary vendor cmds\n"); pr_err 152 drivers/nfc/st-nci/core.c pr_err("Cannot register nfc device to nci core\n"); pr_err 139 drivers/nfc/st-nci/ndlc.c pr_err("UNKNOWN Packet Control Byte=%d\n", pcb); pr_err 226 drivers/nfc/st-nci/ndlc.c pr_err("NULL Frame -> link is dead\n"); pr_err 213 drivers/nfc/st-nci/se.c pr_err("Unexpected apdu_reader pipe on host %x\n", pr_err 169 drivers/nfc/st21nfca/core.c pr_err("Unexpected apdu_reader pipe on host %x\n", pr_err 996 drivers/nfc/st21nfca/core.c pr_err("Cannot allocate nfc hdev.\n"); pr_err 57 drivers/nfc/st21nfca/dep.c #define PROTOCOL_ERR(req) pr_err("%d: ST21NFCA Protocol error: %s\n", \ pr_err 357 drivers/nfc/st21nfca/dep.c pr_err("Received a ACK/NACK PDU\n"); pr_err 360 drivers/nfc/st21nfca/dep.c pr_err("Received a SUPERVISOR PDU\n"); pr_err 613 drivers/nfc/st21nfca/dep.c pr_err("Received a ACK/NACK PDU\n"); pr_err 623 drivers/nfc/st21nfca/dep.c pr_err("Received a SUPERVISOR PDU\n"); pr_err 273 drivers/nfc/st21nfca/i2c.c pr_err(ST21NFCA_HCI_DRIVER_NAME pr_err 123 drivers/nubus/nubus.c pr_err("%s: moved out of slot address space!\n", __func__); pr_err 654 drivers/nubus/nubus.c pr_err("Slot %X: sResource is not a board resource!\n", pr_err 794 drivers/nubus/nubus.c pr_err("Slot %X: Board resource not found!\n", slot); pr_err 670 drivers/nvme/host/fabrics.c pr_err("%s needs to be < %d bytes\n", pr_err 704 drivers/nvme/host/fabrics.c pr_err("Invalid queue_size %d\n", token); pr_err 716 drivers/nvme/host/fabrics.c pr_err("Invalid number of IOQs %d\n", token); pr_err 735 drivers/nvme/host/fabrics.c pr_err("Invalid keep_alive_tmo %d\n", token); pr_err 756 drivers/nvme/host/fabrics.c pr_err("hostnqn already user-assigned: %s\n", pr_err 768 drivers/nvme/host/fabrics.c pr_err("%s needs to be < %d bytes\n", pr_err 788 drivers/nvme/host/fabrics.c pr_err("Invalid reconnect_delay %d\n", token); pr_err 811 drivers/nvme/host/fabrics.c pr_err("Invalid hostid %s\n", p); pr_err 836 drivers/nvme/host/fabrics.c pr_err("Invalid nr_write_queues %d\n", token); pr_err 848 drivers/nvme/host/fabrics.c pr_err("Invalid nr_poll_queues %d\n", token); pr_err 860 drivers/nvme/host/fabrics.c pr_err("Invalid type of service %d\n", token); pr_err 1164 drivers/nvme/host/fabrics.c pr_err("couldn't register class nvme-fabrics\n"); pr_err 1172 drivers/nvme/host/fabrics.c pr_err("couldn't create nvme-fabris device!\n"); pr_err 1179 drivers/nvme/host/fabrics.c pr_err("couldn't register misc device: %d\n", ret); pr_err 3392 drivers/nvme/host/fc.c pr_err("nvme_discovery: too many reference " pr_err 3467 drivers/nvme/host/fc.c pr_err("couldn't register class fc\n"); pr_err 3477 drivers/nvme/host/fc.c pr_err("couldn't create fc_udev device!\n"); pr_err 297 drivers/nvme/host/lightnvm.c pr_err("nvm: memory type not supported\n"); pr_err 1999 drivers/nvme/host/rdma.c pr_err("malformed address passed: %s:%s\n", pr_err 2008 drivers/nvme/host/rdma.c pr_err("malformed src address passed: %s\n", pr_err 1198 drivers/nvme/host/tcp.c pr_err("queue %d: bad type returned %d\n", pr_err 1204 drivers/nvme/host/tcp.c pr_err("queue %d: bad pdu length returned %d\n", pr_err 1210 drivers/nvme/host/tcp.c pr_err("queue %d: bad pfv returned %d\n", pr_err 1218 drivers/nvme/host/tcp.c pr_err("queue %d: data digest mismatch host: %s ctrl: %s\n", pr_err 1228 drivers/nvme/host/tcp.c pr_err("queue %d: header digest mismatch host: %s ctrl: %s\n", pr_err 1236 drivers/nvme/host/tcp.c pr_err("queue %d: unsupported cpda returned %d\n", pr_err 2319 drivers/nvme/host/tcp.c pr_err("malformed address passed: %s:%s\n", pr_err 2328 drivers/nvme/host/tcp.c pr_err("malformed src address passed: %s\n", pr_err 71 drivers/nvme/target/admin-cmd.c pr_err("Could not find namespace id : %d\n", pr_err 591 drivers/nvme/target/admin-cmd.c pr_err("write protect flush failed nsid: %u\n", req->ns->nsid); pr_err 890 drivers/nvme/target/admin-cmd.c pr_err("unhandled cmd %d on qid %d\n", cmd->common.opcode, pr_err 60 drivers/nvme/target/configfs.c pr_err("Cannot modify address while enabled\n"); pr_err 61 drivers/nvme/target/configfs.c pr_err("Disable the address before modifying\n"); pr_err 74 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for adrfam\n", page); pr_err 99 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for portid\n", page); pr_err 104 drivers/nvme/target/configfs.c pr_err("Cannot modify address while enabled\n"); pr_err 105 drivers/nvme/target/configfs.c pr_err("Disable the address before modifying\n"); pr_err 129 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for traddr\n", page); pr_err 134 drivers/nvme/target/configfs.c pr_err("Cannot modify address while enabled\n"); pr_err 135 drivers/nvme/target/configfs.c pr_err("Disable the address before modifying\n"); pr_err 169 drivers/nvme/target/configfs.c pr_err("Cannot modify address while enabled\n"); pr_err 170 drivers/nvme/target/configfs.c pr_err("Disable the address before modifying\n"); pr_err 181 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for treq\n", page); pr_err 206 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for trsvcid\n", page); pr_err 210 drivers/nvme/target/configfs.c pr_err("Cannot modify address while enabled\n"); pr_err 211 drivers/nvme/target/configfs.c pr_err("Disable the address before modifying\n"); pr_err 237 drivers/nvme/target/configfs.c pr_err("Cannot modify inline_data_size while port enabled\n"); pr_err 238 drivers/nvme/target/configfs.c pr_err("Disable the port before modifying\n"); pr_err 243 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for inline_data_size\n", page); pr_err 280 drivers/nvme/target/configfs.c pr_err("Cannot modify address while enabled\n"); pr_err 281 drivers/nvme/target/configfs.c pr_err("Disable the address before modifying\n"); pr_err 290 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for trtype\n", page); pr_err 536 drivers/nvme/target/configfs.c pr_err("disable ns before setting buffered_io value.\n"); pr_err 592 drivers/nvme/target/configfs.c pr_err("invalid nsid %#x", nsid); pr_err 627 drivers/nvme/target/configfs.c pr_err("can only link subsystems into the subsystems dir.!\n"); pr_err 706 drivers/nvme/target/configfs.c pr_err("can only link hosts into the allowed_hosts directory!\n"); pr_err 719 drivers/nvme/target/configfs.c pr_err("can't add hosts when allow_any_host is set!\n"); pr_err 791 drivers/nvme/target/configfs.c pr_err("Can't set allow_any_host when explicit hosts are set!\n"); pr_err 899 drivers/nvme/target/configfs.c pr_err("can't create discovery subsystem through configfs\n"); pr_err 953 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for enable\n", page); pr_err 1054 drivers/nvme/target/configfs.c pr_err("Invalid value '%s' for ana_state\n", page); pr_err 1329 drivers/nvme/target/configfs.c pr_err("configfs_register_subsystem: %d\n", ret); pr_err 312 drivers/nvme/target/core.c pr_err("transport type %d not supported\n", pr_err 364 drivers/nvme/target/core.c pr_err("ctrl %d keep-alive timer (%d seconds) expired!\n", pr_err 439 drivers/nvme/target/core.c pr_err("peer-to-peer DMA is not supported by non-block device namespaces\n"); pr_err 444 drivers/nvme/target/core.c pr_err("peer-to-peer DMA is not supported by the driver of %s\n", pr_err 463 drivers/nvme/target/core.c pr_err("no peer-to-peer memory is available for %s\n", pr_err 499 drivers/nvme/target/core.c pr_err("no peer-to-peer memory is available that's supported by %s and %s\n", pr_err 787 drivers/nvme/target/core.c pr_err("percpu_ref init failed!\n"); pr_err 1132 drivers/nvme/target/core.c pr_err("got cmd %d while CC.EN == 0 on qid = %d\n", pr_err 1138 drivers/nvme/target/core.c pr_err("got cmd %d while CSTS.RDY == 0 on qid = %d\n", pr_err 1202 drivers/nvme/target/core.c pr_err("ctrl %d fatal error occurred!\n", ctrl->cntlid); pr_err 1412 drivers/nvme/target/core.c pr_err("%s: Unknown Subsystem type - %d\n", __func__, type); pr_err 321 drivers/nvme/target/discovery.c pr_err("got cmd %d while not ready\n", pr_err 353 drivers/nvme/target/discovery.c pr_err("unsupported get_log_page lid %d\n", pr_err 367 drivers/nvme/target/discovery.c pr_err("unsupported identify cns %d\n", pr_err 373 drivers/nvme/target/discovery.c pr_err("unhandled cmd %d\n", cmd->common.opcode); pr_err 93 drivers/nvme/target/fabrics-cmd.c pr_err("received unknown capsule type 0x%x\n", pr_err 135 drivers/nvme/target/fabrics-cmd.c pr_err("failed to install queue %d cntlid %d ret %x\n", pr_err 277 drivers/nvme/target/fabrics-cmd.c pr_err("invalid command 0x%x on unconnected queue.\n", pr_err 283 drivers/nvme/target/fabrics-cmd.c pr_err("invalid capsule type 0x%x on unconnected queue.\n", pr_err 1331 drivers/nvme/target/fcloop.c pr_err("couldn't register class fcloop\n"); pr_err 1340 drivers/nvme/target/fcloop.c pr_err("couldn't create ctl device!\n"); pr_err 59 drivers/nvme/target/io-cmd-bdev.c pr_err("failed to open block device %s: (%ld)\n", pr_err 338 drivers/nvme/target/io-cmd-bdev.c pr_err("unhandled cmd %d on qid %d\n", cmd->common.opcode, pr_err 41 drivers/nvme/target/io-cmd-file.c pr_err("failed to open file %s: (%ld)\n", pr_err 390 drivers/nvme/target/io-cmd-file.c pr_err("unhandled cmd for file ns %d on qid %d\n", pr_err 470 drivers/nvme/target/rdma.c pr_err("post_recv cmd failed\n"); pr_err 544 drivers/nvme/target/rdma.c pr_err("SEND for CQE 0x%p failed with status %s (%d).\n", pr_err 577 drivers/nvme/target/rdma.c pr_err("sending cmd response failed\n"); pr_err 646 drivers/nvme/target/rdma.c pr_err("invalid inline data offset!\n"); pr_err 707 drivers/nvme/target/rdma.c pr_err("invalid SGL subtype: %#x\n", sgl->type); pr_err 719 drivers/nvme/target/rdma.c pr_err("invalid SGL subtype: %#x\n", sgl->type); pr_err 725 drivers/nvme/target/rdma.c pr_err("invalid SGL type: %#x\n", sgl->type); pr_err 796 drivers/nvme/target/rdma.c pr_err("RECV for CQE 0x%p failed with status %s (%d)\n", pr_err 805 drivers/nvme/target/rdma.c pr_err("Ctrl Fatal Error: capsule size less than 64 bytes\n"); pr_err 997 drivers/nvme/target/rdma.c pr_err("failed to create CQ cqe= %d ret= %d\n", pr_err 1025 drivers/nvme/target/rdma.c pr_err("failed to create_qp ret= %d\n", ret); pr_err 1201 drivers/nvme/target/rdma.c pr_err("%s: creating RDMA queue failed (%d).\n", pr_err 1237 drivers/nvme/target/rdma.c pr_err("received IB QP event: %s (%d)\n", pr_err 1262 drivers/nvme/target/rdma.c pr_err("rdma_accept failed (error code = %d)\n", ret); pr_err 1388 drivers/nvme/target/rdma.c pr_err("failed to connect queue %d\n", queue->idx); pr_err 1476 drivers/nvme/target/rdma.c pr_err("received unrecognized RDMA CM event %d\n", pr_err 1517 drivers/nvme/target/rdma.c pr_err("address family %d not supported\n", pr_err 1534 drivers/nvme/target/rdma.c pr_err("malformed ip/port passed: %s:%s\n", pr_err 1542 drivers/nvme/target/rdma.c pr_err("CM ID creation failed\n"); pr_err 1552 drivers/nvme/target/rdma.c pr_err("rdma_set_afonly failed (%d)\n", ret); pr_err 1558 drivers/nvme/target/rdma.c pr_err("binding CM ID to %pISpcs failed (%d)\n", pr_err 1565 drivers/nvme/target/rdma.c pr_err("listening to %pISpcs failed (%d)\n", pr_err 235 drivers/nvme/target/tcp.c pr_err("queue %d: header digest enabled but no header digest\n", pr_err 244 drivers/nvme/target/tcp.c pr_err("queue %d: header digest error: recv %#x expected %#x\n", pr_err 263 drivers/nvme/target/tcp.c pr_err("queue %d: data digest flag is cleared\n", queue->idx); pr_err 767 drivers/nvme/target/tcp.c pr_err("bad nvme-tcp pdu length (%d)\n", pr_err 773 drivers/nvme/target/tcp.c pr_err("queue %d: bad pfv %d\n", queue->idx, icreq->pfv); pr_err 778 drivers/nvme/target/tcp.c pr_err("queue %d: unsupported hpda %d\n", queue->idx, pr_err 835 drivers/nvme/target/tcp.c pr_err("queue %d: failed to map data\n", queue->idx); pr_err 853 drivers/nvme/target/tcp.c pr_err("ttag %u unexpected data offset %u (expected %u)\n", pr_err 880 drivers/nvme/target/tcp.c pr_err("unexpected pdu type (%d) before icreq\n", pr_err 898 drivers/nvme/target/tcp.c pr_err("queue %d: out of commands (%d) send_list_len: %d, opcode: %d", pr_err 910 drivers/nvme/target/tcp.c pr_err("failed cmd %p id %d opcode %d, data_len: %d\n", pr_err 921 drivers/nvme/target/tcp.c pr_err("queue %d: failed to map data\n", queue->idx); pr_err 999 drivers/nvme/target/tcp.c pr_err("unexpected pdu type %d\n", hdr->type); pr_err 1005 drivers/nvme/target/tcp.c pr_err("pdu %d bad hlen %d\n", hdr->type, hdr->hlen); pr_err 1089 drivers/nvme/target/tcp.c pr_err("queue %d: cmd %d pdu (%d) data digest error: recv %#x expected %#x\n", pr_err 1548 drivers/nvme/target/tcp.c pr_err("failed to allocate queue\n"); pr_err 1587 drivers/nvme/target/tcp.c pr_err("address family %d not supported\n", pr_err 1596 drivers/nvme/target/tcp.c pr_err("malformed ip/port passed: %s:%s\n", pr_err 1610 drivers/nvme/target/tcp.c pr_err("failed to create a socket\n"); pr_err 1622 drivers/nvme/target/tcp.c pr_err("failed to set TCP_NODELAY sock opt %d\n", ret); pr_err 1629 drivers/nvme/target/tcp.c pr_err("failed to set SO_REUSEADDR sock opt %d\n", ret); pr_err 1636 drivers/nvme/target/tcp.c pr_err("failed to bind port socket %d\n", ret); pr_err 1642 drivers/nvme/target/tcp.c pr_err("failed to listen %d on port sock\n", ret); pr_err 94 drivers/nvmem/mtk-efuse.c pr_err("Failed to register efuse driver\n"); pr_err 639 drivers/of/address.c pr_err("Bad cell count for %pOF\n", dev); pr_err 977 drivers/of/address.c pr_err("translation of DMA address(%pad) to CPU address failed node(%pOF)\n", pr_err 241 drivers/of/base.c pr_err("failed to register existing nodes\n"); pr_err 1338 drivers/of/base.c pr_err("%pOF: could not find phandle\n", pr_err 1353 drivers/of/base.c pr_err("%pOF: could not get %s for %pOF\n", pr_err 1369 drivers/of/base.c pr_err("%pOF: %s = %d found %d\n", pr_err 2281 drivers/of/base.c pr_err("%pOF: Error: Bad %s length: %d\n", np, pr_err 2305 drivers/of/base.c pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n", pr_err 332 drivers/of/dynamic.c pr_err("ERROR: Bad of_node_put() on %pOF\n", node); pr_err 343 drivers/of/dynamic.c pr_err("ERROR: memory leak before free overlay changeset, %pOF\n", pr_err 354 drivers/of/dynamic.c pr_err("ERROR: %s(), unexpected properties in %pOF\n", pr_err 465 drivers/of/dynamic.c pr_err("ERROR: memory leak, expected refcount 1 instead of %d, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node %pOF\n", pr_err 556 drivers/of/dynamic.c pr_err("invalid devicetree changeset action: %i\n", pr_err 562 drivers/of/dynamic.c pr_err("changeset notifier error @%pOF\n", ce->np); pr_err 594 drivers/of/dynamic.c pr_err("changeset: add_property failed @%pOF/%s\n", pr_err 603 drivers/of/dynamic.c pr_err("changeset: remove_property failed @%pOF/%s\n", pr_err 622 drivers/of/dynamic.c pr_err("changeset: update_property failed @%pOF/%s\n", pr_err 716 drivers/of/dynamic.c pr_err("Error applying changeset (%d)\n", ret); pr_err 819 drivers/of/dynamic.c pr_err("Error reverting changeset (%d)\n", ret); pr_err 336 drivers/of/fdt.c pr_err("Error %d processing FDT\n", offset); pr_err 389 drivers/of/fdt.c pr_err("Invalid device tree blob header\n"); pr_err 491 drivers/of/fdt.c pr_err("Reserved memory: invalid reg property in '%s', skipping node.\n", pr_err 553 drivers/of/fdt.c pr_err("Reserved memory: unsupported node format, ignoring\n"); pr_err 836 drivers/of/fdt.c pr_err("\n unrecognized device tree list:\n[ "); pr_err 177 drivers/of/fdt_address.c pr_err("warning: device tree node '%s' has no address.\n", pr_err 191 drivers/of/fdt_address.c pr_err("Bad cell count for %s\n", pr_err 218 drivers/of/fdt_address.c pr_err("Bad cell count for %s\n", pr_err 559 drivers/of/irq.c pr_err("of_irq_init: children remain, but no parents\n"); pr_err 69 drivers/of/of_numa.c pr_err("bad property in memory node\n"); pr_err 87 drivers/of/of_numa.c pr_err("No distance-matrix property in distance-map\n"); pr_err 93 drivers/of/of_numa.c pr_err("Invalid distance-matrix\n"); pr_err 109 drivers/of/of_numa.c pr_err("Invalid distance[node%d -> node%d] = %d\n", pr_err 57 drivers/of/of_reserved_mem.c pr_err("not enough space all defined regions.\n"); pr_err 90 drivers/of/of_reserved_mem.c pr_err("invalid size property in '%s' node.\n", uname); pr_err 100 drivers/of/of_reserved_mem.c pr_err("invalid alignment property in '%s' node.\n", pr_err 122 drivers/of/of_reserved_mem.c pr_err("invalid alloc-ranges property in '%s', skipping node.\n", pr_err 227 drivers/of/of_reserved_mem.c pr_err("OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n", pr_err 177 drivers/of/overlay.c pr_err("overlay changeset %s notifier error %d, target: %pOF\n", pr_err 325 drivers/of/overlay.c pr_err("ERROR: changing value of #address-cells is not allowed in %pOF\n", pr_err 333 drivers/of/overlay.c pr_err("ERROR: changing value of #size-cells is not allowed in %pOF\n", pr_err 365 drivers/of/overlay.c pr_err("WARNING: memory leak will occur if overlay removed, property: %pOF/%s\n", pr_err 556 drivers/of/overlay.c pr_err("ERROR: multiple fragments add and/or delete node %pOF\n", pr_err 592 drivers/of/overlay.c pr_err("ERROR: multiple fragments add, update, and/or delete property %pOF/%s\n", pr_err 700 drivers/of/overlay.c pr_err("find target, node: %pOF, phandle 0x%x not found\n", pr_err 709 drivers/of/overlay.c pr_err("find target, node: %pOF, path '%s' not found\n", pr_err 714 drivers/of/overlay.c pr_err("find target, node: %pOF, no target property\n", info_node); pr_err 817 drivers/of/overlay.c pr_err("symbols in overlay, but not in live tree\n"); pr_err 826 drivers/of/overlay.c pr_err("no fragments or symbols in overlay\n"); pr_err 842 drivers/of/overlay.c pr_err("%s() failed, ret = %d\n", __func__, ret); pr_err 927 drivers/of/overlay.c pr_err("devicetree state suspect, refuse to apply overlay\n"); pr_err 960 drivers/of/overlay.c pr_err("overlay changeset pre-apply notify error %d\n", ret); pr_err 983 drivers/of/overlay.c pr_err("overlay apply changeset entry notify error %d\n", ret); pr_err 991 drivers/of/overlay.c pr_err("overlay changeset post-apply notify error %d\n", pr_err 1029 drivers/of/overlay.c pr_err("Invalid overlay_fdt header\n"); pr_err 1047 drivers/of/overlay.c pr_err("unable to unflatten overlay_fdt\n"); pr_err 1113 drivers/of/overlay.c pr_err("%s: #%d overlaps with #%d @%pOF\n", pr_err 1119 drivers/of/overlay.c pr_err("%s: #%d overlaps with #%d @%pOF\n", pr_err 1146 drivers/of/overlay.c pr_err("overlay #%d is not topmost\n", remove_ovcs->id); pr_err 1196 drivers/of/overlay.c pr_err("suspect devicetree state, refuse to remove overlay\n"); pr_err 1206 drivers/of/overlay.c pr_err("remove: Could not find overlay #%d\n", *ovcs_id); pr_err 1217 drivers/of/overlay.c pr_err("overlay changeset pre-remove notify error %d\n", ret); pr_err 1242 drivers/of/overlay.c pr_err("overlay remove changeset entry notify error %d\n", ret); pr_err 1249 drivers/of/overlay.c pr_err("overlay changeset post-remove notify error %d\n", pr_err 59 drivers/of/pdt.c pr_err("%s: pkg2path failed; assigning %s\n", __func__, buf); pr_err 263 drivers/of/platform.c pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n", pr_err 270 drivers/of/platform.c pr_err("amba_device_add() failed (%d) for %pOF\n", pr_err 681 drivers/of/platform.c pr_err("%s: failed to create for '%pOF'\n", pr_err 54 drivers/of/property.c pr_err("size of %s in node %pOF is not a multiple of %d\n", pr_err 620 drivers/of/property.c pr_err("graph: no port node found in %pOF\n", parent); pr_err 275 drivers/of/resolver.c pr_err("null overlay\n"); pr_err 281 drivers/of/resolver.c pr_err("overlay not detached\n"); pr_err 311 drivers/of/resolver.c pr_err("no symbols in root of device tree.\n"); pr_err 343 drivers/of/resolver.c pr_err("overlay phandle fixup failed: %d\n", err); pr_err 40 drivers/of/unittest.c pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \ pr_err 154 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 215 drivers/of/unittest.c pr_err("Child node %pOFn links to wrong parent %pOFn\n", pr_err 372 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 480 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 486 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 492 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 498 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 504 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 604 drivers/of/unittest.c pr_err("No testcase data in device tree\n"); pr_err 797 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 818 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 874 drivers/of/unittest.c pr_err("missing testcase data\n"); pr_err 1131 drivers/of/unittest.c pr_err("unittest internal error: unable to add testdata property %pOF/%s", pr_err 1230 drivers/of/unittest.c pr_err("%s: Failed to resolve phandles (rc=%i)\n", __func__, rc); pr_err 2290 drivers/of/unittest.c pr_err("no overlay data for %s\n", overlay_name); pr_err 2297 drivers/of/unittest.c pr_err("No dtb 'overlay_base' to attach\n"); pr_err 2303 drivers/of/unittest.c pr_err("No dtb 'overlay_base' to attach\n"); pr_err 2309 drivers/of/unittest.c pr_err("dtb 'overlay_base' header totalsize != actual size"); pr_err 2315 drivers/of/unittest.c pr_err("alloc for dtb 'overlay_base' failed"); pr_err 2350 drivers/of/unittest.c pr_err("no overlay data for %s\n", overlay_name); pr_err 2356 drivers/of/unittest.c pr_err("no overlay data for %s\n", overlay_name); pr_err 2368 drivers/of/unittest.c pr_err("of_overlay_fdt_apply() expected %d, ret=%d, %s\n", pr_err 81 drivers/opp/core.c pr_err("%s: Invalid parameters\n", __func__); pr_err 104 drivers/opp/core.c pr_err("%s: Invalid parameters\n", __func__); pr_err 122 drivers/opp/core.c pr_err("%s: Invalid parameters\n", __func__); pr_err 140 drivers/opp/core.c pr_err("%s: Invalid parameters\n", __func__); pr_err 161 drivers/opp/core.c pr_err("%s: Invalid parameters\n", __func__); pr_err 1975 drivers/opp/core.c pr_err("%s: Couldn't find matching OPP table (%p: %p)\n", pr_err 1989 drivers/opp/core.c pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__, src_table, pr_err 122 drivers/opp/cpu.c pr_err("%s: failed to get cpu%d device\n", __func__, pr_err 102 drivers/opp/of.c pr_err("%s: Unable to parse required-opps: %pOF, index: %d\n", pr_err 320 drivers/opp/of.c pr_err("%s: Unable to find required OPP node: %pOF (%d)\n", pr_err 879 drivers/opp/of.c pr_err("%s: failed to get cpu%d device\n", __func__, pr_err 960 drivers/opp/of.c pr_err("%pOF: Couldn't find opp node\n", cpu_np); pr_err 1002 drivers/opp/of.c pr_err("%s: Failed to find required OPP table %pOF: %ld\n", pr_err 1033 drivers/opp/of.c pr_err("%s: Invalid parameters\n", __func__); pr_err 744 drivers/parport/share.c pr_err("%s: cannot grant exclusive access for device %s\n", pr_err 856 drivers/parport/share.c pr_err("%s: no more devices allowed\n", port->name); pr_err 876 drivers/parport/share.c pr_err("%s: cannot grant exclusive access for device %s\n", pr_err 26 drivers/pci/bus.c pr_err("PCI: can't add host bridge window %pR\n", res); pr_err 220 drivers/pci/controller/pci-thunder-ecam.c pr_err("Bad MSIX cap header: %08x\n", v); pr_err 277 drivers/pci/controller/pci-thunder-ecam.c pr_err("Bad PCIe cap header: %08x\n", v); pr_err 39 drivers/pci/controller/pci-versatile.c pr_err("Illegal slot value: %d\n", slot); pr_err 391 drivers/pci/controller/pci-xgene-msi.c pr_err("failed to register GIC IRQ handler\n"); pr_err 404 drivers/pci/controller/pci-xgene-msi.c pr_err("failed to set affinity for GIC IRQ"); pr_err 407 drivers/pci/controller/pci-xgene-msi.c pr_err("failed to alloc CPU mask for affinity\n"); pr_err 601 drivers/pci/endpoint/functions/pci-epf-test.c pr_err("Failed to allocate the kpcitest work queue\n"); pr_err 607 drivers/pci/endpoint/functions/pci-epf-test.c pr_err("Failed to register pci epf test driver --> %d\n", ret); pr_err 171 drivers/pci/endpoint/pci-ep-cfs.c pr_err("failed to register configfs group for %s\n", name); pr_err 424 drivers/pci/endpoint/pci-ep-cfs.c pr_err("failed to create endpoint function device\n"); pr_err 471 drivers/pci/endpoint/pci-ep-cfs.c pr_err("failed to register configfs group for %s function\n", pr_err 518 drivers/pci/endpoint/pci-ep-cfs.c pr_err("Error %d while registering subsystem %s\n", pr_err 527 drivers/pci/endpoint/pci-ep-cfs.c pr_err("Error %d while registering functions group\n", pr_err 537 drivers/pci/endpoint/pci-ep-cfs.c pr_err("Error %d while registering controllers group\n", pr_err 679 drivers/pci/endpoint/pci-epc-core.c pr_err("failed to create pci epc class --> %ld\n", pr_err 382 drivers/pci/endpoint/pci-epf-core.c pr_err("failed to register pci epf bus --> %d\n", ret); pr_err 282 drivers/pci/hotplug/acpiphp_core.c pr_err("pci_hp_register failed with error %d\n", retval); pr_err 171 drivers/pci/hotplug/acpiphp_ibm.c pr_err("APLS null ACPI descriptor for slot %d\n", id); pr_err 188 drivers/pci/hotplug/acpiphp_ibm.c pr_err("APLS evaluation failed: 0x%08x\n", stat); pr_err 191 drivers/pci/hotplug/acpiphp_ibm.c pr_err("APLS method failed: 0x%08llx\n", rc); pr_err 216 drivers/pci/hotplug/acpiphp_ibm.c pr_err("APLS null ACPI descriptor for slot %d\n", id); pr_err 292 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: APCI evaluation failed\n", __func__); pr_err 300 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: Invalid APCI object\n", __func__); pr_err 306 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: Invalid APCI element %d\n", __func__, i); pr_err 395 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: Failed to get device information status=0x%x\n", pr_err 431 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: acpi_walk_namespace failed\n", __func__); pr_err 437 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: acpi_bus_get_device failed\n", __func__); pr_err 451 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: Failed to register notification handler\n", pr_err 476 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: attention info deregistration failed", __func__); pr_err 483 drivers/pci/hotplug/acpiphp_ibm.c pr_err("%s: Notification handler removal failed\n", __func__); pr_err 958 drivers/pci/p2pdma.c pr_err("No such PCI device: %.*s\n", (int)strcspn(page, "\n"), page); pr_err 688 drivers/pci/pci-acpi.c pr_err("%s: Type %d record not supported\n", pr_err 6145 drivers/pci/pci.c pr_err("PCI: Can't parse resource_alignment parameter: %s\n", pr_err 6385 drivers/pci/pci.c pr_err("Node %pOF has ", parent->of_node); pr_err 6386 drivers/pci/pci.c pr_err("Inconsistent \"linux,pci-domain\" property in DT\n"); pr_err 6471 drivers/pci/pci.c pr_err("PCI: Unknown option `%s'\n", str); pr_err 1032 drivers/pci/pcie/aer.c pr_err("AER recover: Can not find pci_dev for %04x:%02x:%02x:%x\n", pr_err 1071 drivers/pci/pcie/aer.c pr_err("AER recover: Buffer overflow when recovering AER for %04x:%02x:%02x:%x\n", pr_err 407 drivers/pci/slot.c pr_err("PCI: Slot initialization failure\n"); pr_err 72 drivers/pcmcia/pxa2xx_stargate2.c pr_err("%s(): bad Vcc %u\n", pr_err 103 drivers/pcmcia/pxa2xx_trizeps4.c pr_err("%s(): Vcc 5V not supported in socket\n", __func__); pr_err 106 drivers/pcmcia/pxa2xx_trizeps4.c pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); pr_err 114 drivers/pcmcia/pxa2xx_trizeps4.c pr_err("%s(): Vpp 12V not supported in socket\n", __func__); pr_err 118 drivers/pcmcia/pxa2xx_trizeps4.c pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); pr_err 345 drivers/pcmcia/soc_common.c pr_err("soc_common_pcmcia: unable to configure socket %d\n", pr_err 599 drivers/perf/arm_pmu.c pr_err("unable to request IRQ%d for ARM PMU counters\n", irq); pr_err 892 drivers/perf/arm_pmu.c pr_err("CPU hotplug notifier for ARM PMU could not be registered: %d\n", pr_err 104 drivers/perf/arm_pmu_platform.c pr_err("unable to count PMU IRQs\n"); pr_err 436 drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c pr_err("DDRC PMU: setup hotplug, ret = %d\n", ret); pr_err 447 drivers/perf/hisilicon/hisi_uncore_hha_pmu.c pr_err("HHA PMU: Error setup hotplug, ret = %d;\n", ret); pr_err 437 drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c pr_err("L3C PMU: Error setup hotplug, ret = %d\n", ret); pr_err 833 drivers/perf/thunderx2_pmu.c pr_err("TX2 PMU: setup hotplug failed(%d)\n", ret); pr_err 238 drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c pr_err("Invalid extcon event\n"); pr_err 149 drivers/phy/broadcom/phy-bcm-sr-usb.c pr_err("%s: FAIL\n", __func__); pr_err 1123 drivers/phy/phy-core.c pr_err("failed to create phy class --> %ld\n", pr_err 568 drivers/phy/phy-xgene.c pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n", pr_err 589 drivers/phy/phy-xgene.c pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n", pr_err 174 drivers/phy/rockchip/phy-rockchip-emmc.c pr_err("%s: caldone failed, ret=%d\n", __func__, ret); pr_err 222 drivers/phy/rockchip/phy-rockchip-emmc.c pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret); pr_err 536 drivers/phy/rockchip/phy-rockchip-usb.c pr_err("%s: failed to find usbphy node\n", __func__); pr_err 544 drivers/phy/rockchip/phy-rockchip-usb.c pr_err("%s: usb-uart not available on %s\n", pr_err 555 drivers/phy/rockchip/phy-rockchip-usb.c pr_err("%s: Missing rockchip,grf property, %lu\n", pr_err 562 drivers/phy/rockchip/phy-rockchip-usb.c pr_err("%s: could not init usb_uart, %d\n", __func__, ret); pr_err 30 drivers/phy/ti/phy-omap-control.c pr_err("%s: invalid device\n", __func__); pr_err 65 drivers/phy/ti/phy-omap-control.c pr_err("%s: invalid device\n", __func__); pr_err 309 drivers/phy/ti/phy-omap-control.c pr_err("%s: unable to get sys_clkin\n", __func__); pr_err 1390 drivers/pinctrl/core.c pr_err("failed to register map %s (%d): no device given\n", pr_err 1396 drivers/pinctrl/core.c pr_err("failed to register map %d: no map name given\n", pr_err 1403 drivers/pinctrl/core.c pr_err("failed to register map %s (%d): no pin control device given\n", pr_err 1423 drivers/pinctrl/core.c pr_err("failed to register map %s (%d): invalid type given\n", pr_err 1051 drivers/pinctrl/nomadik/pinctrl-nomadik.c pr_err("populate \"%pOFn\": device not found\n", np); pr_err 41 drivers/pinctrl/pinconf.c pr_err("failed to register map %s (%d): no group/pin given\n", pr_err 48 drivers/pinctrl/pinconf.c pr_err("failed to register map %s (%d): no configs given\n", pr_err 420 drivers/pinctrl/pinctrl-artpec6.c pr_err("%s: Impossible pin %d\n", __func__, pin); pr_err 1879 drivers/pinctrl/pinctrl-at91.c pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n", pr_err 308 drivers/pinctrl/pinctrl-falcon.c pr_err("%s: Invalid config param %04x\n", pr_err 548 drivers/pinctrl/pinctrl-tb10x.c pr_err("%pOF: No abilis,function property in device tree.\n", pr_err 65 drivers/pinctrl/pinmux.c pr_err("failed to register map %s (%d): no function given\n", pr_err 300 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c pr_err("function: %d is not defined\n", function); pr_err 312 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c pr_err("LV/MV subtype doesn't have func3/func4\n"); pr_err 68 drivers/pinctrl/samsung/pinctrl-exynos-arm.c pr_err("%s: failed to find clock controller DT node\n", pr_err 76 drivers/pinctrl/samsung/pinctrl-exynos-arm.c pr_err("%s: failed to map clock registers\n", __func__); pr_err 133 drivers/pinctrl/samsung/pinctrl-exynos.c pr_err("unsupported external interrupt type\n"); pr_err 350 drivers/pinctrl/samsung/pinctrl-s3c64xx.c pr_err("unsupported external interrupt type\n"); pr_err 558 drivers/pinctrl/samsung/pinctrl-s3c64xx.c pr_err("unsupported external interrupt type\n"); pr_err 751 drivers/pinctrl/sh-pfc/core.c pr_err("%s: reg 0x%x: var_field_width declares %u instead of %u bits\n", pr_err 757 drivers/pinctrl/sh-pfc/core.c pr_err("%s: reg 0x%x: enum_ids[] has %u instead of %u values\n", pr_err 776 drivers/pinctrl/sh-pfc/core.c pr_err("%s: pin %s/%s: name conflict\n", pr_err 784 drivers/pinctrl/sh-pfc/core.c pr_err("%s: pin %s/%s: pin %u conflict\n", pr_err 792 drivers/pinctrl/sh-pfc/core.c pr_err("%s: pin %s/%s: enum_id %u conflict\n", pr_err 809 drivers/pinctrl/sh-pfc/core.c pr_err("%s: empty function %u\n", drvname, i); pr_err 824 drivers/pinctrl/sh-pfc/core.c pr_err("%s: function %s: group %s not found\n", pr_err 833 drivers/pinctrl/sh-pfc/core.c pr_err("%s: empty group %u\n", drvname, i); pr_err 838 drivers/pinctrl/sh-pfc/core.c pr_err("%s: orphan group %s\n", drvname, pr_err 5209 drivers/pinctrl/sirf/pinctrl-atlas7.c pr_err("Pad#%d type[%d] doesn't support ds code[%d]!\n", pr_err 5225 drivers/pinctrl/sirf/pinctrl-atlas7.c pr_err("Pad#%d type[%d] doesn't support ds current[%d]!\n", pr_err 683 drivers/platform/chrome/chromeos_laptop.c pr_err("failed to find DMI device '%s'\n", dmi_name); pr_err 689 drivers/platform/chrome/chromeos_laptop.c pr_err("failed to get data from DMI for '%s'\n", dmi_name); pr_err 906 drivers/platform/chrome/chromeos_laptop.c pr_err("failed to register i2c bus notifier: %d\n", pr_err 550 drivers/platform/chrome/cros_ec_lpc.c pr_err(DRV_NAME ": unsupported system.\n"); pr_err 560 drivers/platform/chrome/cros_ec_lpc.c pr_err(DRV_NAME ": can't register driver: %d\n", ret); pr_err 569 drivers/platform/chrome/cros_ec_lpc.c pr_err(DRV_NAME ": can't register device: %d\n", ret); pr_err 539 drivers/platform/chrome/wilco_ec/event.c pr_err(DRV_NAME ": Failed registering class: %d\n", ret); pr_err 546 drivers/platform/chrome/wilco_ec/event.c pr_err(DRV_NAME ": Failed allocating dev numbers: %d\n", ret); pr_err 553 drivers/platform/chrome/wilco_ec/event.c pr_err(DRV_NAME ": Failed registering driver: %d\n", ret); pr_err 430 drivers/platform/chrome/wilco_ec/telemetry.c pr_err(DRV_NAME ": Failed registering class: %d", ret); pr_err 437 drivers/platform/chrome/wilco_ec/telemetry.c pr_err(DRV_NAME ": Failed allocating dev numbers: %d", ret); pr_err 444 drivers/platform/chrome/wilco_ec/telemetry.c pr_err(DRV_NAME ": Failed registering driver: %d\n", ret); pr_err 165 drivers/platform/mips/cpu_hwmon.c pr_err("hwmon_device_register fail!\n"); pr_err 175 drivers/platform/mips/cpu_hwmon.c pr_err("fail to create loongson hwmon!\n"); pr_err 181 drivers/platform/mips/cpu_hwmon.c pr_err("fail to create cpu temperature interface!\n"); pr_err 1473 drivers/platform/x86/acer-wmi.c pr_err("Could not register Acer backlight device\n"); pr_err 2178 drivers/platform/x86/acer-wmi.c pr_err("Unable to detect available WMID devices\n"); pr_err 2184 drivers/platform/x86/acer-wmi.c pr_err("No WMID device detection method found\n"); pr_err 2192 drivers/platform/x86/acer-wmi.c pr_err("Unable to detect available AMW0 devices\n"); pr_err 2201 drivers/platform/x86/acer-wmi.c pr_err("No or unsupported WMI interface, unable to load\n"); pr_err 2219 drivers/platform/x86/acer-wmi.c pr_err("Cannot enable EC raw mode\n"); pr_err 2223 drivers/platform/x86/acer-wmi.c pr_err("Cannot enable Launch Manager mode\n"); pr_err 2241 drivers/platform/x86/acer-wmi.c pr_err("Unable to register platform driver\n"); pr_err 303 drivers/platform/x86/acerhdf.c pr_err("invalid fan state %d requested, setting to auto!\n", pr_err 324 drivers/platform/x86/acerhdf.c pr_err("fanon temperature too high, set to %d\n", pr_err 331 drivers/platform/x86/acerhdf.c pr_err("interval too high, set to %d\n", pr_err 375 drivers/platform/x86/acerhdf.c pr_err("error binding cooling dev\n"); pr_err 388 drivers/platform/x86/acerhdf.c pr_err("error unbinding cooling dev\n"); pr_err 534 drivers/platform/x86/acerhdf.c pr_err("error reading temperature, hand off control to BIOS\n"); pr_err 540 drivers/platform/x86/acerhdf.c pr_err("error reading fan state, hand off control to BIOS\n"); pr_err 629 drivers/platform/x86/acerhdf.c pr_err("error getting hardware information\n"); pr_err 677 drivers/platform/x86/acerhdf.c pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n", pr_err 749 drivers/platform/x86/acerhdf.c pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n", pr_err 316 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: zone set failure: %u\n", status); pr_err 340 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: invalid target zone\n"); pr_err 366 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: brightness set failure: %u\n", status); pr_err 380 drivers/platform/x86/alienware-wmi.c pr_err("LED brightness update failed\n"); pr_err 556 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: unknown HDMI cable status: %d\n", status); pr_err 580 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: unknown HDMI source status: %u\n", status); pr_err 601 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", pr_err 661 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: unknown amplifier cable status: %d\n", status); pr_err 718 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: unknown deep sleep status: %d\n", status); pr_err 741 drivers/platform/x86/alienware-wmi.c pr_err("alienware-wmi: deep sleep control failed: results: %u\n", pr_err 623 drivers/platform/x86/apple-gmux.c pr_err("Failed to find gmux I/O resource\n"); pr_err 631 drivers/platform/x86/apple-gmux.c pr_err("gmux I/O region too small (%lu < %u)\n", pr_err 638 drivers/platform/x86/apple-gmux.c pr_err("gmux I/O already in use\n"); pr_err 707 drivers/platform/x86/apple-gmux.c pr_err("Cannot find acpi handle for pnp device %s\n", pr_err 721 drivers/platform/x86/apple-gmux.c pr_err("Install notify handler failed: %s\n", pr_err 729 drivers/platform/x86/apple-gmux.c pr_err("Cannot enable gpe: %s\n", pr_err 766 drivers/platform/x86/apple-gmux.c pr_err("Failed to register vga_switcheroo handler\n"); pr_err 821 drivers/platform/x86/asus-laptop.c pr_err("Could not register asus backlight device\n"); pr_err 1498 drivers/platform/x86/asus-laptop.c pr_err("Unable to setup input device keymap\n"); pr_err 1705 drivers/platform/x86/asus-laptop.c pr_err("Hotkey initialization failed\n"); pr_err 1720 drivers/platform/x86/asus-laptop.c pr_err("Error calling CWAP(%d)\n", wapf); pr_err 1766 drivers/platform/x86/asus-laptop.c pr_err("Hotkey device not present, aborting\n"); pr_err 795 drivers/platform/x86/asus-wmi.c pr_err("Unable to read PCI config space?\n"); pr_err 882 drivers/platform/x86/asus-wmi.c pr_err("Error removing rfkill notify handler %s\n", node); pr_err 918 drivers/platform/x86/asus-wmi.c pr_err("Unable to find wifi PCI bus\n"); pr_err 933 drivers/platform/x86/asus-wmi.c pr_err("Unable to register hotplug slot - %d\n", ret); pr_err 1354 drivers/platform/x86/asus-wmi.c pr_err("Unknown fan speed %#x\n", value); pr_err 1585 drivers/platform/x86/asus-wmi.c pr_err("Could not register asus hwmon device\n"); pr_err 1868 drivers/platform/x86/asus-wmi.c pr_err("Could not register backlight device\n"); pr_err 2498 drivers/platform/x86/asus-wmi.c pr_err("Unable to register notify handler - %d\n", status); pr_err 975 drivers/platform/x86/compal-laptop.c pr_err("ACPI needs to be enabled for this driver to work!\n"); pr_err 980 drivers/platform/x86/compal-laptop.c pr_err("Motherboard not recognized (You could try the module's force-parameter)\n"); pr_err 1356 drivers/platform/x86/dell-laptop.c pr_err("Setting old previous keyboard state failed\n"); pr_err 305 drivers/platform/x86/dell-smbios-base.c pr_err("No dell-smbios drivers are loaded\n"); pr_err 568 drivers/platform/x86/dell-smbios-base.c pr_err("Unable to run on non-Dell system\n"); pr_err 595 drivers/platform/x86/dell-smbios-base.c pr_err("No SMBIOS backends available (wmi: %d, smm: %d)\n", pr_err 136 drivers/platform/x86/dell-wmi-aio.c pr_err("Unable to setup input device keymap\n"); pr_err 179 drivers/platform/x86/dell-wmi-aio.c pr_err("Unable to register notify handler - %d\n", err); pr_err 714 drivers/platform/x86/dell-wmi.c pr_err("Failed to enable WMI events\n"); pr_err 593 drivers/platform/x86/eeepc-laptop.c pr_err("Unable to read PCI config space?\n"); pr_err 696 drivers/platform/x86/eeepc-laptop.c pr_err("Error removing rfkill notify handler %s\n", pr_err 734 drivers/platform/x86/eeepc-laptop.c pr_err("Unable to find wifi PCI bus\n"); pr_err 742 drivers/platform/x86/eeepc-laptop.c pr_err("Unable to register hotplug slot - %d\n", ret); pr_err 1081 drivers/platform/x86/eeepc-laptop.c pr_err("Could not register eeepc hwmon device\n"); pr_err 1136 drivers/platform/x86/eeepc-laptop.c pr_err("Could not register eeepc backlight device\n"); pr_err 1173 drivers/platform/x86/eeepc-laptop.c pr_err("Unable to setup input device keymap\n"); pr_err 1179 drivers/platform/x86/eeepc-laptop.c pr_err("Unable to register input device\n"); pr_err 1330 drivers/platform/x86/eeepc-laptop.c pr_err("Hotkey device not present, aborting\n"); pr_err 1338 drivers/platform/x86/eeepc-laptop.c pr_err("Hotkey initialization failed\n"); pr_err 1344 drivers/platform/x86/eeepc-laptop.c pr_err("Get control methods supported failed\n"); pr_err 78 drivers/platform/x86/hp-wireless.c pr_err("Failed to setup hp wireless hotkeys\n"); pr_err 124 drivers/platform/x86/ibm_rtl.c pr_err("Hardware not responding to " pr_err 201 drivers/platform/x86/ideapad-laptop.c pr_err("timeout in %s\n", __func__); pr_err 223 drivers/platform/x86/ideapad-laptop.c pr_err("timeout in %s\n", __func__); pr_err 692 drivers/platform/x86/ideapad-laptop.c pr_err("Unable to setup input device keymap\n"); pr_err 698 drivers/platform/x86/ideapad-laptop.c pr_err("Unable to register input device\n"); pr_err 820 drivers/platform/x86/ideapad-laptop.c pr_err("Could not register backlight device\n"); pr_err 467 drivers/platform/x86/intel-hid.c pr_err("Failed to setup Intel HID hotkeys\n"); pr_err 476 drivers/platform/x86/intel-hid.c pr_err("Failed to setup Intel 5 button array hotkeys\n"); pr_err 165 drivers/platform/x86/intel-vbtn.c pr_err("Failed to setup Intel Virtual Button\n"); pr_err 305 drivers/platform/x86/intel_oaktrail.c pr_err("ACPI needs to be enabled for this driver to work!\n"); pr_err 310 drivers/platform/x86/intel_oaktrail.c pr_err("Platform not recognized (You could try the module's force-parameter)"); pr_err 1007 drivers/platform/x86/intel_pmc_ipc.c pr_err("Failed to register PMC ipc platform driver\n"); pr_err 1012 drivers/platform/x86/intel_pmc_ipc.c pr_err("Failed to register PMC ipc pci driver\n"); pr_err 656 drivers/platform/x86/intel_telemetry_debugfs.c pr_err("Failed to read S0ix residency"); pr_err 674 drivers/platform/x86/intel_telemetry_debugfs.c pr_err("Get PSS Trace Verbosity Failed with Error %d\n", err); pr_err 694 drivers/platform/x86/intel_telemetry_debugfs.c pr_err("Changing PSS Trace Verbosity Failed. Error %d\n", err); pr_err 721 drivers/platform/x86/intel_telemetry_debugfs.c pr_err("Get IOSS Trace Verbosity Failed with Error %d\n", err); pr_err 741 drivers/platform/x86/intel_telemetry_debugfs.c pr_err("Changing IOSS Trace Verbosity Failed. Error %d\n", err); pr_err 827 drivers/platform/x86/intel_telemetry_debugfs.c pr_err("Wrong s0ix counters detected\n"); pr_err 245 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Unknown Telemetry action specified %d\n", action); pr_err 298 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Read Failed\n"); pr_err 311 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 327 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 337 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_RESET Fail for data: %x\n", pr_err 356 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 369 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_UPDATE Fail for Evt%x\n", pr_err 388 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_ADD Fail for Event %x\n", pr_err 407 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n"); pr_err 434 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Read Failed\n"); pr_err 443 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 456 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 465 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_RESET Fail for Event %x\n", pr_err 482 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 495 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_UPDATE Fail for Event %x\n", pr_err 515 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_ADD Fail for Event %x\n", pr_err 532 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Event Enable Write Failed\n"); pr_err 661 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS Sampling Period Out of Range\n"); pr_err 667 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS Sampling Period Out of Range\n"); pr_err 674 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("TELEMETRY Config Failed\n"); pr_err 688 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS Sampling Period Out of Range\n"); pr_err 698 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Read Failed\n"); pr_err 711 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 727 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n"); pr_err 735 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS Sampling Period Out of Range\n"); pr_err 745 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Read Failed\n"); pr_err 755 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); pr_err 769 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TELEM_CTRL Event Enable Write Failed\n"); pr_err 811 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("TELEMETRY Reset Failed\n"); pr_err 874 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("TELEMETRY ADD Failed\n"); pr_err 896 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Ssram under update. Please Try Later\n"); pr_err 911 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Ssram under update. Please Try Later\n"); pr_err 916 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Timeout while reading Events\n"); pr_err 945 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit); pr_err 1013 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TRACE_CTRL Read Failed\n"); pr_err 1024 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TRACE_CTL Read Failed\n"); pr_err 1031 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit); pr_err 1057 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TRACE_CTRL Read Failed\n"); pr_err 1068 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("PSS TRACE_CTRL Verbosity Set Failed\n"); pr_err 1078 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TRACE_CTL Read Failed\n"); pr_err 1089 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("IOSS TRACE_CTL Verbosity Set Failed\n"); pr_err 1095 drivers/platform/x86/intel_telemetry_pltdrv.c pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit); pr_err 101 drivers/platform/x86/lg-laptop.c pr_err("Cannot get handle"); pr_err 143 drivers/platform/x86/lg-laptop.c pr_err("Cannot get handle"); pr_err 181 drivers/platform/x86/lg-laptop.c pr_err("Cannot get handle"); pr_err 207 drivers/platform/x86/lg-laptop.c pr_err("Bad event status 0x%x\n", status); pr_err 621 drivers/platform/x86/lg-laptop.c pr_err("unable to register platform device\n"); pr_err 1012 drivers/platform/x86/msi-laptop.c pr_err("Unable to install key filter\n"); pr_err 104 drivers/platform/x86/msi-wmi.c pr_err("query block returned object " pr_err 138 drivers/platform/x86/msi-wmi.c pr_err("Could not query backlight: %d\n", err); pr_err 150 drivers/platform/x86/msi-wmi.c pr_err("get: Invalid brightness value: 0x%X\n", ret); pr_err 293 drivers/platform/x86/msi-wmi.c pr_err("Unable to setup input device\n"); pr_err 300 drivers/platform/x86/msi-wmi.c pr_err("Unable to setup WMI notify handler\n"); pr_err 313 drivers/platform/x86/msi-wmi.c pr_err("Unable to setup backlight device\n"); pr_err 320 drivers/platform/x86/msi-wmi.c pr_err("This machine doesn't have neither MSI-hotkeys nor backlight through WMI\n"); pr_err 215 drivers/platform/x86/pcengines-apuv2.c pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev)); pr_err 226 drivers/platform/x86/pcengines-apuv2.c pr_err("failed to detect apu board via dmi\n"); pr_err 1400 drivers/platform/x86/samsung-laptop.c pr_err("Can't map the segment at 0xf0000\n"); pr_err 1418 drivers/platform/x86/samsung-laptop.c pr_err("This computer does not support SABI\n"); pr_err 1439 drivers/platform/x86/samsung-laptop.c pr_err("Can't remap %x\n", ifaceP); pr_err 455 drivers/platform/x86/sony-laptop.c pr_err("kfifo_alloc failed\n"); pr_err 749 drivers/platform/x86/sony-laptop.c pr_err("Failed to evaluate [%s]\n", method); pr_err 1204 drivers/platform/x86/sony-laptop.c pr_err("Event 0x%x outside of capabilities list\n", pr_err 1333 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up touchpad control function (%d)\n", pr_err 1341 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up battery care function (%d)\n", pr_err 1348 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up lid resume function (%d)\n", pr_err 1354 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up thermal profile function (%d)\n", pr_err 1362 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up GFX Switch status (%d)\n", pr_err 1368 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up high speed charging function (%d)\n", pr_err 1375 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up rfkill support (%d)\n", pr_err 1386 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up keyboard backlight function (%d)\n", pr_err 1392 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up low battery function (%d)\n", pr_err 1398 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up fan speed function (%d)\n", pr_err 1404 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up USB charge support (%d)\n", pr_err 1410 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up panel ID function (%d)\n", pr_err 1416 drivers/platform/x86/sony-laptop.c pr_err("couldn't set up smart connect support (%d)\n", pr_err 1566 drivers/platform/x86/sony-laptop.c pr_err("%s: %d\n", __func__, ret); pr_err 3201 drivers/platform/x86/sony-laptop.c pr_err("Unable to create input devices\n"); pr_err 3881 drivers/platform/x86/sony-laptop.c pr_err("sony_pic_camera_command invalid: %d\n", command); pr_err 4295 drivers/platform/x86/sony-laptop.c pr_err("kfifo_alloc failed\n"); pr_err 4305 drivers/platform/x86/sony-laptop.c pr_err("misc_register failed\n"); pr_err 4408 drivers/platform/x86/sony-laptop.c pr_err("Unknown SPIC Type, more than 2 IO Ports\n"); pr_err 4568 drivers/platform/x86/sony-laptop.c pr_err("Error evaluating _SRS\n"); pr_err 4659 drivers/platform/x86/sony-laptop.c pr_err("Couldn't disable device\n"); pr_err 4707 drivers/platform/x86/sony-laptop.c pr_err("Unable to read possible resources\n"); pr_err 4714 drivers/platform/x86/sony-laptop.c pr_err("Unable to create input devices\n"); pr_err 4756 drivers/platform/x86/sony-laptop.c pr_err("Failed to request_region\n"); pr_err 4776 drivers/platform/x86/sony-laptop.c pr_err("Failed to request_irq\n"); pr_err 4784 drivers/platform/x86/sony-laptop.c pr_err("Couldn't enable device\n"); pr_err 4898 drivers/platform/x86/sony-laptop.c pr_err("Unable to register SPIC driver\n"); pr_err 4906 drivers/platform/x86/sony-laptop.c pr_err("Unable to register SNC driver\n"); pr_err 71 drivers/platform/x86/surface3-wmi.c pr_err("query block returned object type: %d - buffer length:%d\n", pr_err 127 drivers/platform/x86/surface3-wmi.c pr_err("duplicate entry %s\n", SPI_TS_OBJ_NAME); pr_err 580 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_evalf() called with empty format\n"); pr_err 605 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_evalf() called with invalid format character '%c'\n", pr_err 634 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_evalf() called with invalid format character '%c'\n", pr_err 640 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_evalf(%s, %s, ...) failed: %s\n", pr_err 792 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_bus_get_device(%s) failed: %d\n", ibm->name, rc); pr_err 808 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_install_notify_handler(%s) failed: %s\n", pr_err 833 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to allocate memory for ibm->acpi->driver\n"); pr_err 844 drivers/platform/x86/thinkpad_acpi.c pr_err("acpi_bus_register_driver(%s) failed: %d\n", pr_err 1284 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to allocate memory for rfkill class\n"); pr_err 1294 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to read initial state for %s, error %d\n", pr_err 1309 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to register %s rfkill switch: %d\n", name, res); pr_err 2140 drivers/platform/x86/thinkpad_acpi.c pr_err("Unknown multi mode status type %d with value 0x%04X, please report this to %s\n", pr_err 2175 drivers/platform/x86/thinkpad_acpi.c pr_err("Unknown/reserved multi mode value 0x%04X for type %d, please report this to %s\n", pr_err 2683 drivers/platform/x86/thinkpad_acpi.c pr_err("could not create kernel thread for hotkey polling\n"); pr_err 2917 drivers/platform/x86/thinkpad_acpi.c pr_err("hotkey_source_mask: failed to update the firmware event mask!\n"); pr_err 3181 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to restore hot key mask to BIOS defaults\n"); pr_err 3544 drivers/platform/x86/thinkpad_acpi.c pr_err("missing MHKA handler, please report this to %s\n", pr_err 3561 drivers/platform/x86/thinkpad_acpi.c pr_err("missing MHKA handler, please report this to %s\n", pr_err 3590 drivers/platform/x86/thinkpad_acpi.c pr_err("unknown version of the HKEY interface: 0x%x\n", pr_err 3592 drivers/platform/x86/thinkpad_acpi.c pr_err("please report this to %s\n", TPACPI_MAIL); pr_err 3659 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to allocate memory for key map\n"); pr_err 3782 drivers/platform/x86/thinkpad_acpi.c pr_err("Cannot read adaptive keyboard mode\n"); pr_err 3796 drivers/platform/x86/thinkpad_acpi.c pr_err("Cannot set adaptive keyboard mode\n"); pr_err 4121 drivers/platform/x86/thinkpad_acpi.c pr_err("unknown HKEY notification event %d\n", event); pr_err 4132 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to retrieve HKEY event\n"); pr_err 4227 drivers/platform/x86/thinkpad_acpi.c pr_err("Cannot read adaptive keyboard mode.\n"); pr_err 4238 drivers/platform/x86/thinkpad_acpi.c pr_err("error while attempting to reset the event firmware interface\n"); pr_err 4250 drivers/platform/x86/thinkpad_acpi.c pr_err("Cannot set adaptive keyboard mode.\n"); pr_err 4291 drivers/platform/x86/thinkpad_acpi.c pr_err("Please remove the hotkey=enable module parameter, it is deprecated. Hotkeys are always enabled.\n"); pr_err 5017 drivers/platform/x86/thinkpad_acpi.c pr_err("error while trying to restore original video autoswitch mode\n"); pr_err 5089 drivers/platform/x86/thinkpad_acpi.c pr_err("video auto-switch left enabled due to error\n"); pr_err 5158 drivers/platform/x86/thinkpad_acpi.c pr_err("video auto-switch left enabled due to error\n"); pr_err 6086 drivers/platform/x86/thinkpad_acpi.c pr_err("Out of memory for LED data\n"); pr_err 6506 drivers/platform/x86/thinkpad_acpi.c pr_err("ThinkPad ACPI EC access misbehaving, falling back to ACPI TMPx access mode\n"); pr_err 6509 drivers/platform/x86/thinkpad_acpi.c pr_err("ThinkPad ACPI EC access misbehaving, disabling thermal sensors access\n"); pr_err 6871 drivers/platform/x86/thinkpad_acpi.c pr_err("Unknown _BCL data, please report this to %s\n", pr_err 7045 drivers/platform/x86/thinkpad_acpi.c pr_err("Could not register backlight device\n"); pr_err 7621 drivers/platform/x86/thinkpad_acpi.c pr_err("Failed to create ALSA card structures: %d\n", rc); pr_err 7655 drivers/platform/x86/thinkpad_acpi.c pr_err("Failed to create ALSA volume control: %d\n", pr_err 7665 drivers/platform/x86/thinkpad_acpi.c pr_err("Failed to create ALSA mute control: %d\n", rc); pr_err 7672 drivers/platform/x86/thinkpad_acpi.c pr_err("Failed to register ALSA card: %d\n", rc); pr_err 7728 drivers/platform/x86/thinkpad_acpi.c pr_err("UCMS step volume mode not implemented, please contact %s\n", pr_err 7795 drivers/platform/x86/thinkpad_acpi.c pr_err("Could not create the ALSA mixer interface\n"); pr_err 8539 drivers/platform/x86/thinkpad_acpi.c pr_err("fan watchdog: error %d while enabling fan, will try again later...\n", pr_err 8820 drivers/platform/x86/thinkpad_acpi.c pr_err("ThinkPad ACPI EC access misbehaving, fan status and control unavailable\n"); pr_err 9068 drivers/platform/x86/thinkpad_acpi.c pr_err("level command accepted for unsupported access mode %d\n", pr_err 9084 drivers/platform/x86/thinkpad_acpi.c pr_err("enable command accepted for unsupported access mode %d\n", pr_err 9099 drivers/platform/x86/thinkpad_acpi.c pr_err("disable command accepted for unsupported access mode %d\n", pr_err 9119 drivers/platform/x86/thinkpad_acpi.c pr_err("speed command accepted for unsupported access mode %d\n", pr_err 9425 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to set charge threshold on battery %d", pr_err 9432 drivers/platform/x86/thinkpad_acpi.c pr_err("failed to set stop threshold: %d", battery); pr_err 9457 drivers/platform/x86/thinkpad_acpi.c pr_err("Error probing battery %d\n", battery); pr_err 9470 drivers/platform/x86/thinkpad_acpi.c pr_err("Error probing battery %d\n", battery); pr_err 9476 drivers/platform/x86/thinkpad_acpi.c pr_err("Error probing battery stop; %d\n", battery); pr_err 9486 drivers/platform/x86/thinkpad_acpi.c pr_err("Error probing battery stop: %d\n", battery); pr_err 9989 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to create proc entry %s\n", ibm->name); pr_err 10189 drivers/platform/x86/thinkpad_acpi.c pr_err("Not yet supported ThinkPad detected!\n"); pr_err 10484 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to get DMI data: %d\n", ret); pr_err 10510 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to create proc dir " TPACPI_PROC_DIR "\n"); pr_err 10517 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to register main platform driver\n"); pr_err 10525 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to register hwmon platform driver\n"); pr_err 10538 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to create sysfs driver attributes\n"); pr_err 10551 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to register platform device\n"); pr_err 10561 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to register hwmon platform device\n"); pr_err 10572 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to register hwmon device\n"); pr_err 10610 drivers/platform/x86/thinkpad_acpi.c pr_err("unable to register input device\n"); pr_err 158 drivers/platform/x86/topstar-laptop.c pr_err("Unable to setup input device keymap\n"); pr_err 164 drivers/platform/x86/topstar-laptop.c pr_err("Unable to register input device\n"); pr_err 228 drivers/platform/x86/topstar-laptop.c pr_err("Unable to switch FNCX notifications\n"); pr_err 43 drivers/platform/x86/toshiba-wmi.c pr_err("Bad event status 0x%x\n", status); pr_err 121 drivers/platform/x86/toshiba-wmi.c pr_err("Failed to setup input device\n"); pr_err 381 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to open SCI failed\n"); pr_err 418 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to close SCI failed\n"); pr_err 469 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to query Illumination support failed\n"); pr_err 496 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call for illumination failed\n"); pr_err 514 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call for illumination failed\n"); pr_err 540 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to query kbd illumination support failed\n"); pr_err 575 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set KBD backlight status failed\n"); pr_err 592 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get KBD backlight status failed\n"); pr_err 609 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get the keyboard backlight failed\n"); pr_err 630 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set KBD Illumination mode failed\n"); pr_err 644 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set the touchpad failed\n"); pr_err 661 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to query the touchpad failed\n"); pr_err 680 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get ECO led failed\n"); pr_err 697 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get ECO led failed\n"); pr_err 719 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get ECO led failed\n"); pr_err 742 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set ECO led failed\n"); pr_err 760 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to query the accelerometer failed\n"); pr_err 780 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to query the accelerometer failed\n"); pr_err 810 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get USB Sleep and Charge mode failed\n"); pr_err 826 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get USB Sleep and Charge mode failed\n"); pr_err 849 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set USB S&C mode failed\n"); pr_err 867 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set USB S&C mode failed\n"); pr_err 888 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get USB S&C battery level failed\n"); pr_err 919 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set USB S&C battery level failed\n"); pr_err 943 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get USB Rapid Charge failed\n"); pr_err 973 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set USB Rapid Charge failed\n"); pr_err 993 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Sleep and Music failed\n"); pr_err 1010 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set Sleep and Music failed\n"); pr_err 1028 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get KBD function keys failed\n"); pr_err 1045 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set KBD function keys failed\n"); pr_err 1063 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Panel Power ON failed\n"); pr_err 1080 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set Panel Power ON failed\n"); pr_err 1098 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get USB 3 failed\n"); pr_err 1115 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set USB 3 failed\n"); pr_err 1132 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get System type failed\n"); pr_err 1158 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Wireless status failed\n"); pr_err 1195 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get WWAN status failed\n"); pr_err 1214 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set WWAN status failed\n"); pr_err 1232 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set WWAN power failed\n"); pr_err 1254 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Cooling Method failed\n"); pr_err 1270 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Cooling Method failed\n"); pr_err 1283 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set Cooling Method failed\n"); pr_err 1297 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Transflective Backlight failed\n"); pr_err 1309 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set Transflective Backlight failed\n"); pr_err 1337 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get LCD Brightness failed\n"); pr_err 1365 drivers/platform/x86/toshiba_acpi.c pr_err("Error reading LCD brightness\n"); pr_err 1396 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set LCD Brightness failed\n"); pr_err 1450 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Video-Out failed\n"); pr_err 1557 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to get Fan status failed\n"); pr_err 1569 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to set Fan status failed\n"); pr_err 2409 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to update sysfs entries\n"); pr_err 2510 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI call to query SMM registers failed\n"); pr_err 2619 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to allocate WWAN rfkill device\n"); pr_err 2627 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to register WWAN rfkill device\n"); pr_err 2692 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI NTFY method execution failed\n"); pr_err 2706 drivers/platform/x86/toshiba_acpi.c pr_err("ACPI INFO method execution failed\n"); pr_err 2733 drivers/platform/x86/toshiba_acpi.c pr_err("Failed to query hotkey event\n"); pr_err 2827 drivers/platform/x86/toshiba_acpi.c pr_err("Error installing key filter\n"); pr_err 2920 drivers/platform/x86/toshiba_acpi.c pr_err("Could not register toshiba backlight device\n"); pr_err 3048 drivers/platform/x86/toshiba_acpi.c pr_err("HCI interface not found\n"); pr_err 3063 drivers/platform/x86/toshiba_acpi.c pr_err("Failed to register miscdevice\n"); pr_err 3137 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to allocate iio device\n"); pr_err 3153 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to register iio device\n"); pr_err 3242 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to update sysfs entries\n"); pr_err 3321 drivers/platform/x86/toshiba_acpi.c pr_err("Unable to create proc dir " PROC_TOSHIBA "\n"); pr_err 3327 drivers/platform/x86/toshiba_acpi.c pr_err("Failed to register ACPI driver: %d\n", ret); pr_err 78 drivers/platform/x86/toshiba_bluetooth.c pr_err("ACPI call to query Bluetooth presence failed\n"); pr_err 97 drivers/platform/x86/toshiba_bluetooth.c pr_err("Could not get Bluetooth device status\n"); pr_err 110 drivers/platform/x86/toshiba_bluetooth.c pr_err("Could not attach USB Bluetooth device\n"); pr_err 116 drivers/platform/x86/toshiba_bluetooth.c pr_err("Could not power ON Bluetooth device\n"); pr_err 129 drivers/platform/x86/toshiba_bluetooth.c pr_err("Could not power OFF Bluetooth device\n"); pr_err 135 drivers/platform/x86/toshiba_bluetooth.c pr_err("Could not detach USB Bluetooth device\n"); pr_err 149 drivers/platform/x86/toshiba_bluetooth.c pr_err("Could not sync bluetooth device status\n"); pr_err 265 drivers/platform/x86/toshiba_bluetooth.c pr_err("Unable to allocate rfkill device\n"); pr_err 274 drivers/platform/x86/toshiba_bluetooth.c pr_err("Unable to register rfkill device\n"); pr_err 35 drivers/platform/x86/toshiba_haps.c pr_err("Unable to reset the HDD protection\n"); pr_err 48 drivers/platform/x86/toshiba_haps.c pr_err("Error while setting the protection level\n"); pr_err 163 drivers/platform/x86/toshiba_haps.c pr_err("ACPI call to query HDD protection failed\n"); pr_err 1052 drivers/platform/x86/touchscreen_dmi.c pr_err("%s: failed to register i2c bus notifier: %d\n", pr_err 1397 drivers/platform/x86/wmi.c pr_err("Failed to parse WDG method\n"); pr_err 1451 drivers/platform/x86/wmi.c pr_err("Error loading mapper\n"); pr_err 108 drivers/platform/x86/xo15-ebook.c pr_err("Unsupported hid [%s]\n", hid); pr_err 83 drivers/power/avs/smartreflex.c pr_err("%s: Null voltage domain passed!\n", __func__); pr_err 1027 drivers/power/avs/smartreflex.c pr_err("%s: platform driver register failed for SR\n", pr_err 29 drivers/power/reset/as3722-poweroff.c pr_err("AS3722 poweroff is not initialised\n"); pr_err 59 drivers/power/reset/axxia-reset.c pr_err("%pOFn: syscon lookup failed\n", dev->of_node); pr_err 53 drivers/power/reset/brcmstb-reboot.c pr_err("failed to write rst_src_en (%d)\n", rc); pr_err 59 drivers/power/reset/brcmstb-reboot.c pr_err("failed to read rst_src_en (%d)\n", rc); pr_err 65 drivers/power/reset/brcmstb-reboot.c pr_err("failed to write sw_mstr_rst (%d)\n", rc); pr_err 71 drivers/power/reset/brcmstb-reboot.c pr_err("failed to read sw_mstr_rst (%d)\n", rc); pr_err 110 drivers/power/reset/brcmstb-reboot.c pr_err("failed to look up compatible string\n"); pr_err 117 drivers/power/reset/brcmstb-reboot.c pr_err("failed to get syscon phandle\n"); pr_err 124 drivers/power/reset/brcmstb-reboot.c pr_err("can't get rst_src_en offset (%d)\n", rc); pr_err 131 drivers/power/reset/brcmstb-reboot.c pr_err("can't get sw_mstr_rst offset (%d)\n", rc); pr_err 52 drivers/power/reset/hisi-reboot.c pr_err("failed to find reboot-offset property\n"); pr_err 58 drivers/power/reset/qnap-poweroff.c pr_err("%s: triggering power-off...\n", __func__); pr_err 1138 drivers/power/supply/charger-manager.c pr_err("Cannot set current limit of %s (%s)\n", pr_err 140 drivers/power/supply/generic-adc-battery.c pr_err("read channel error\n"); pr_err 502 drivers/power/supply/max17042_battery.c pr_err("%s: err %d\n", __func__, ret); pr_err 540 drivers/power/supply/olpc_battery.c pr_err("olpc-battery: " pr_err 206 drivers/power/supply/test_power.c pr_err("%s: failed to register %s\n", __func__, pr_err 304 drivers/powercap/idle_inject.c pr_err("cpu%d is already registered\n", cpu); pr_err 306 drivers/powercap/intel_rapl_common.c pr_err("Cannot find matching power limit for constraint %d\n", cid); pr_err 729 drivers/powercap/intel_rapl_common.c pr_err("Failed to read power unit REG 0x%llx on CPU %d, exit.\n", pr_err 757 drivers/powercap/intel_rapl_common.c pr_err("Failed to read power unit REG 0x%llx on CPU %d, exit.\n", pr_err 857 drivers/powercap/intel_rapl_common.c pr_err("Invalid floor frequency config register\n"); pr_err 1047 drivers/powercap/intel_rapl_common.c pr_err("no package domain found, unknown topology!\n"); pr_err 1161 drivers/powercap/intel_rapl_common.c pr_err("invalid domain id %d\n", domain); pr_err 1425 drivers/powercap/intel_rapl_common.c pr_err("driver does not support CPU family %d model %d\n", pr_err 70 drivers/pps/clients/pps-ktimer.c pr_err("cannot register PPS source\n"); pr_err 62 drivers/pps/clients/pps-ldisc.c pr_err("cannot register PPS source \"%s\"\n", info.path); pr_err 70 drivers/pps/clients/pps-ldisc.c pr_err("cannot open tty ldisc \"%s\"\n", info.path); pr_err 125 drivers/pps/clients/pps-ldisc.c pr_err("can't register PPS line discipline\n"); pr_err 138 drivers/pps/clients/pps-ldisc.c pr_err("can't unregister PPS line discipline\n"); pr_err 143 drivers/pps/clients/pps_parport.c pr_err("memory allocation failed, not attaching\n"); pr_err 157 drivers/pps/clients/pps_parport.c pr_err("couldn't register with %s\n", port->name); pr_err 162 drivers/pps/clients/pps_parport.c pr_err("couldn't claim %s\n", port->name); pr_err 169 drivers/pps/clients/pps_parport.c pr_err("couldn't register PPS source\n"); pr_err 227 drivers/pps/clients/pps_parport.c pr_err("clear_wait value should be not greater" pr_err 234 drivers/pps/clients/pps_parport.c pr_err("unable to register with parport\n"); pr_err 85 drivers/pps/generators/pps_gen_parport.c pr_err("we are late this time %lld.%09ld\n", pr_err 194 drivers/pps/generators/pps_gen_parport.c pr_err("couldn't register with %s\n", port->name); pr_err 199 drivers/pps/generators/pps_gen_parport.c pr_err("couldn't claim %s\n", port->name); pr_err 244 drivers/pps/generators/pps_gen_parport.c pr_err("delay value should be not greater" pr_err 251 drivers/pps/generators/pps_gen_parport.c pr_err("unable to register with parport\n"); pr_err 73 drivers/pps/kapi.c pr_err("%s: unsupported default parameters\n", pr_err 79 drivers/pps/kapi.c pr_err("%s: unspecified time format\n", pr_err 110 drivers/pps/kapi.c pr_err("%s: unable to create char device\n", pr_err 123 drivers/pps/kapi.c pr_err("%s: unable to register source\n", info->name); pr_err 360 drivers/pps/pps.c pr_err("%s: too many PPS sources in the system\n", pr_err 376 drivers/pps/pps.c pr_err("%s: failed to add char device %d:%d\n", pr_err 461 drivers/pps/pps.c pr_err("failed to allocate class\n"); pr_err 468 drivers/pps/pps.c pr_err("failed to allocate char device region\n"); pr_err 87 drivers/ptp/ptp_chardev.c pr_err("driver cannot use function %u on pin %u\n", func, chan); pr_err 230 drivers/ptp/ptp_clock.c pr_err("failed to create ptp aux_worker %d\n", err); pr_err 249 drivers/ptp/ptp_clock.c pr_err("failed to register pps source\n"); pr_err 267 drivers/ptp/ptp_clock.c pr_err("failed to create posix clock\n"); pr_err 386 drivers/ptp/ptp_clock.c pr_err("ptp: failed to allocate class\n"); pr_err 392 drivers/ptp/ptp_clock.c pr_err("ptp: failed to allocate device region\n"); pr_err 263 drivers/ptp/ptp_ixp46x.c pr_err("cannot set trigger type for irq %d\n", irq); pr_err 269 drivers/ptp/ptp_ixp46x.c pr_err("request_irq failed for irq %d\n", irq); pr_err 307 drivers/ptp/ptp_ixp46x.c pr_err("failed to setup gpio %d as irq\n", MASTER_GPIO); pr_err 311 drivers/ptp/ptp_ixp46x.c pr_err("failed to setup gpio %d as irq\n", SLAVE_GPIO); pr_err 414 drivers/ptp/ptp_qoriq.c pr_err("error reference clock value, or lower than 100MHz\n"); pr_err 573 drivers/ptp/ptp_qoriq.c pr_err("irq not in device tree\n"); pr_err 578 drivers/ptp/ptp_qoriq.c pr_err("request_irq failed\n"); pr_err 584 drivers/ptp/ptp_qoriq.c pr_err("no resource\n"); pr_err 588 drivers/ptp/ptp_qoriq.c pr_err("resource busy\n"); pr_err 595 drivers/ptp/ptp_qoriq.c pr_err("ioremap ptp registers failed\n"); pr_err 696 drivers/pwm/core.c pr_err("%s(): can't parse \"pwms\" property\n", __func__); pr_err 703 drivers/pwm/core.c pr_err("%s(): PWM chip not found\n", __func__); pr_err 80 drivers/rapidio/devices/rio_mport_cdev.c pr_err(DRV_PREFIX "%s ERROR " fmt "\n", __func__, ##arg) pr_err 389 drivers/rapidio/rio-scan.c pr_err("RIO: Component Tag Counter Overflow\n"); pr_err 854 drivers/rapidio/rio-scan.c pr_err("RIO: failed to allocate destID table\n"); pr_err 1236 drivers/rapidio/rio.c pr_err("RIO: Route trace for %s failed\n", pr_err 1248 drivers/rapidio/rio.c pr_err("RIO_PW: Bad switch initialization for %s\n", pr_err 1888 drivers/rapidio/rio.c pr_err("%s: prep_rio_sg == NULL\n", __func__); pr_err 2181 drivers/rapidio/rio.c pr_err("RIO: unable allocate rio_wq\n"); pr_err 2226 drivers/rapidio/rio.c pr_err("RIO: reached specified max number of mports\n"); pr_err 2307 drivers/rapidio/rio.c pr_err("RIO: %s unexpected state transition for mport %s\n", pr_err 66 drivers/rapidio/rio_cm.c pr_err(DRV_NAME ": %s ERROR " fmt "\n", __func__, ##arg) pr_err 359 drivers/ras/cec.c pr_err("Soft-offlining pfn: 0x%llx\n", pfn); pr_err 537 drivers/ras/cec.c pr_err("Error allocating CE array page!\n"); pr_err 860 drivers/regulator/ab8500-ext.c pr_err("Failed to register ab8500 ext regulator: %d\n", ret); pr_err 1662 drivers/regulator/ab8500.c pr_err("Failed to register ab8500 regulator: %d\n", ret); pr_err 39 drivers/regulator/core.c pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) pr_err 1857 drivers/regulator/core.c pr_err("get() with no identifier\n"); pr_err 4484 drivers/regulator/core.c pr_err("Failed to enable %s: %d\n", consumers[i].supply, pr_err 4521 drivers/regulator/core.c pr_err("Failed to disable %s: %d\n", consumers[i].supply, ret); pr_err 4525 drivers/regulator/core.c pr_err("Failed to re-enable %s: %d\n", pr_err 196 drivers/regulator/da903x.c pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); pr_err 43 drivers/regulator/dbx500-prcmu.c pr_err("power state: unbalanced enable/disable calls\n"); pr_err 51 drivers/regulator/dummy.c pr_err("Failed to register regulator: %d\n", ret); pr_err 73 drivers/regulator/dummy.c pr_err("Failed to allocate dummy regulator device\n"); pr_err 79 drivers/regulator/dummy.c pr_err("Failed to register dummy regulator device: %d\n", ret); pr_err 86 drivers/regulator/dummy.c pr_err("Failed to register dummy regulator driver: %d\n", ret); pr_err 141 drivers/regulator/mcp16502.c pr_err("%s: %d invalid\n", __func__, mode); pr_err 133 drivers/regulator/of_regulator.c pr_err("%pOFn: invalid mode %u\n", np, pval); pr_err 150 drivers/regulator/of_regulator.c pr_err("%pOFn: couldn't read allowed modes index %d, ret=%d\n", pr_err 156 drivers/regulator/of_regulator.c pr_err("%pOFn: invalid regulator-allowed-modes element %u\n", pr_err 217 drivers/regulator/of_regulator.c pr_err("%pOFn: invalid mode %u\n", pr_err 66 drivers/regulator/vctrl-regulator.c pr_err("vctrl: failed to get control voltage\n"); pr_err 202 drivers/regulator/wm831x-isink.c pr_err("Failed to register WM831x ISINK driver: %d\n", ret); pr_err 1736 drivers/remoteproc/remoteproc_core.c pr_err("invalid rproc handle\n"); pr_err 2208 drivers/remoteproc/remoteproc_core.c pr_err("NULL rproc pointer\n"); pr_err 370 drivers/remoteproc/remoteproc_debugfs.c pr_err("can't create debugfs dir\n"); pr_err 153 drivers/remoteproc/remoteproc_sysfs.c pr_err("remoteproc: unable to register class\n"); pr_err 746 drivers/rpmsg/qcom_glink_native.c pr_err("%s channel not found for cid %d\n", __func__, cid); pr_err 61 drivers/rpmsg/qcom_glink_smem.c pr_err("failed to acquire RX fifo handle: %ld\n", pr_err 207 drivers/rpmsg/qcom_glink_smem.c pr_err("failed to register glink edge\n"); pr_err 1463 drivers/rpmsg/qcom_smd.c pr_err("failed to register smd edge\n"); pr_err 556 drivers/rpmsg/rpmsg_char.c pr_err("rpmsg: failed to allocate char dev region\n"); pr_err 562 drivers/rpmsg/rpmsg_char.c pr_err("failed to create rpmsg class\n"); pr_err 569 drivers/rpmsg/rpmsg_char.c pr_err("rpmsgchr: failed to register rpmsg driver\n"); pr_err 591 drivers/rpmsg/rpmsg_core.c pr_err("failed to register rpmsg bus: %d\n", ret); pr_err 1049 drivers/rpmsg/virtio_rpmsg_bus.c pr_err("failed to register virtio driver: %d\n", ret); pr_err 422 drivers/rtc/class.c pr_err("couldn't create class\n"); pr_err 471 drivers/rtc/dev.c pr_err("failed to allocate char dev region\n"); pr_err 742 drivers/rtc/rtc-ds3232.c pr_err("Failed to register ds3232 driver: %d\n", ret); pr_err 748 drivers/rtc/rtc-ds3232.c pr_err("Failed to register ds3234 driver: %d\n", ret); pr_err 30 drivers/rtc/rtc-efi-platform.c pr_err("unable to register rtc device...\n"); pr_err 220 drivers/rtc/rtc-fsl-ftm-alarm.c pr_err("Out of alarm range {0~262} seconds.\n"); pr_err 125 drivers/rtc/rtc-opal.c pr_err("Failed to get the async token\n"); pr_err 187 drivers/rtc/rtc-opal.c pr_err("Failed to get the async token\n"); pr_err 759 drivers/rtc/rtc-pcf2127.c pr_err("Failed to register pcf2127 i2c driver: %d\n", ret); pr_err 765 drivers/rtc/rtc-pcf2127.c pr_err("Failed to register pcf2127 spi driver: %d\n", ret); pr_err 356 drivers/rtc/rtc-rs5c313.c pr_err("invalid value, resetting to 1 Jan 2000\n"); pr_err 972 drivers/rtc/rtc-rv3029c2.c pr_err("Failed to register rv3029 driver: %d\n", ret); pr_err 978 drivers/rtc/rtc-rv3029c2.c pr_err("Failed to register rv3049 driver: %d\n", ret); pr_err 210 drivers/rtc/rtc-s5m.c pr_err("RTC cannot handle the year %d\n", pr_err 53 drivers/rtc/rtc-test.c pr_err("ABE: %s +%d %s\n", __FILE__, __LINE__, __func__); pr_err 164 drivers/rtc/rtc-twl.c pr_err("Could not read TWL register %X - error %d\n", reg, ret); pr_err 177 drivers/rtc/rtc-twl.c pr_err("Could not write TWL register %X - error %d\n", pr_err 141 drivers/s390/block/dasd_devmap.c pr_err("The IPL device is not a CCW device\n"); pr_err 345 drivers/s390/block/dasd_devmap.c pr_err("%s is not a valid device range\n", range); pr_err 103 drivers/s390/block/dasd_erp.c pr_err("%s: default ERP has run out of retries and failed\n", pr_err 268 drivers/s390/block/dcssblk.c pr_err("Adjacent DCSSs %s and %s are not " pr_err 281 drivers/s390/block/dcssblk.c pr_err("DCSS %s and DCSS %s have " pr_err 380 drivers/s390/block/dcssblk.c pr_err("DCSS %s is of type SC and cannot be " pr_err 405 drivers/s390/block/dcssblk.c pr_err("DCSS device %s is removed after a failed access mode " pr_err 1010 drivers/s390/block/dcssblk.c pr_err("Suspending the system failed because DCSS device %s " pr_err 1034 drivers/s390/block/dcssblk.c pr_err("The address range of DCSS %s changed " pr_err 367 drivers/s390/block/scm_blk.c pr_err("An I/O operation to SCM failed with rc=%d\n", pr_err 270 drivers/s390/block/xpram.c pr_err("%d is not a valid number of XPRAM devices\n",devs); pr_err 316 drivers/s390/block/xpram.c pr_err("Not enough expanded memory available\n"); pr_err 398 drivers/s390/block/xpram.c pr_err("Resuming the system failed: %s\n", message); pr_err 451 drivers/s390/block/xpram.c pr_err("No expanded memory available\n"); pr_err 225 drivers/s390/char/hmcdrv_cache.c pr_err("Allocating the requested cache size of %zu bytes failed\n", pr_err 167 drivers/s390/char/monreader.c pr_err("Reading monitor data failed with rc=%i\n", rc); pr_err 245 drivers/s390/char/monreader.c pr_err("z/VM *MONITOR system service disconnected with rc=%i\n", pr_err 304 drivers/s390/char/monreader.c pr_err("Connecting to the z/VM *MONITOR system service " pr_err 501 drivers/s390/char/monreader.c pr_err("Connecting to the z/VM *MONITOR system service " pr_err 555 drivers/s390/char/monreader.c pr_err("The z/VM *MONITOR record device driver cannot be " pr_err 565 drivers/s390/char/monreader.c pr_err("The z/VM *MONITOR record device driver failed to " pr_err 596 drivers/s390/char/monreader.c pr_err("The specified *MONITOR DCSS %s does not have the " pr_err 80 drivers/s390/char/monwriter.c pr_err("Writing monitor data failed with rc=%i\n", rc); pr_err 459 drivers/s390/char/sclp_cmd.c pr_err("Memory hotplug state changed, suspend refused.\n"); pr_err 122 drivers/s390/char/sclp_config.c pr_err("Open for Business request failed with response code " pr_err 132 drivers/s390/char/sclp_sdias.c pr_err("sclp_send failed for get_nr_blocks\n"); pr_err 146 drivers/s390/char/sclp_sdias.c pr_err("SCLP error: %x\n", sdias_evbuf.event_status); pr_err 199 drivers/s390/char/sclp_sdias.c pr_err("sclp_send failed: %x\n", rc); pr_err 219 drivers/s390/char/sclp_sdias.c pr_err("Error from SCLP while copying hsa. Event status = %x\n", pr_err 456 drivers/s390/char/tape_core.c pr_err("A cartridge is loaded in tape device %s, " pr_err 469 drivers/s390/char/tape_core.c pr_err("Tape device %s is busy, refusing to " pr_err 180 drivers/s390/char/vmlogrdr.c pr_err("vmlogrdr: connection severed with reason %i\n", reason); pr_err 358 drivers/s390/char/vmlogrdr.c pr_err("vmlogrdr: iucv connection to %s " pr_err 695 drivers/s390/char/vmlogrdr.c pr_err("vmlogrdr: device %s is busy. Refuse to suspend.\n", pr_err 854 drivers/s390/char/vmlogrdr.c pr_err("not running under VM, driver not loaded.\n"); pr_err 182 drivers/s390/char/vmur.c pr_err("Unit record device %s is busy, %s refusing to " pr_err 1004 drivers/s390/char/vmur.c pr_err("The %s cannot be loaded without z/VM\n", pr_err 1030 drivers/s390/char/vmur.c pr_err("Kernel function alloc_chrdev_region failed with " pr_err 414 drivers/s390/cio/chsc.c pr_err("Link stopped: RS=%02x RSID=%04x IC=%02x " pr_err 55 drivers/s390/cio/vfio_ccw_drv.c pr_err("vfio_ccw: could not quiesce subchannel 0.%x.%04x!\n", pr_err 189 drivers/s390/cio/vfio_ccw_fsm.c pr_err("vfio-ccw: FSM: I/O request from state:%d\n", private->state); pr_err 210 drivers/s390/cio/vfio_ccw_fsm.c pr_err("vfio-ccw: FSM: %s request from state:%d\n", pr_err 46 drivers/s390/crypto/ap_queue.c pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n", pr_err 113 drivers/s390/crypto/zcrypt_error.h pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 123 drivers/s390/crypto/zcrypt_error.h pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 146 drivers/s390/crypto/zcrypt_error.h pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 154 drivers/s390/crypto/zcrypt_error.h pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 359 drivers/s390/crypto/zcrypt_msgtype50.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 396 drivers/s390/crypto/zcrypt_msgtype50.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 663 drivers/s390/crypto/zcrypt_msgtype6.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 807 drivers/s390/crypto/zcrypt_msgtype6.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 841 drivers/s390/crypto/zcrypt_msgtype6.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 870 drivers/s390/crypto/zcrypt_msgtype6.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 900 drivers/s390/crypto/zcrypt_msgtype6.c pr_err("Cryptographic device %02x.%04x failed and was set offline\n", pr_err 203 drivers/s390/net/ctcm_fsms.c pr_err("%s: The specified target device is not valid\n", pr_err 208 drivers/s390/net/ctcm_fsms.c pr_err("An I/O operation resulted in error %04x\n", pr_err 1857 drivers/s390/net/ctcm_main.c pr_err("%s / Initializing the ctcm device driver failed, ret = %d\n", pr_err 88 drivers/s390/net/lcs.c pr_err("Not enough memory for debug facility.\n"); pr_err 1069 drivers/s390/net/lcs.c pr_err("Query IPAssist failed. Assuming unsupported!\n"); pr_err 1884 drivers/s390/net/lcs.c pr_err("Error in opening device!\n"); pr_err 2155 drivers/s390/net/lcs.c pr_err(" Initialization failed\n"); pr_err 2446 drivers/s390/net/lcs.c pr_err("Initializing the lcs device driver failed\n"); pr_err 6357 drivers/s390/net/qeth_core_main.c pr_err("Initializing the qeth device driver failed\n"); pr_err 120 drivers/s390/scsi/zfcp_aux.c pr_err("%s is not a valid SCSI device\n", devstr); pr_err 149 drivers/s390/scsi/zfcp_aux.c pr_err("The zfcp device driver could not register with " pr_err 43 drivers/sbus/char/oradax.c #define dax_err(fmt, ...) pr_err("%s: " fmt "\n", __func__, ##__VA_ARGS__) pr_err 765 drivers/scsi/NCR5380.c pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n", pr_err 772 drivers/scsi/NCR5380.c pr_err("scsi%d: BASR %02x\n", instance->host_no, pr_err 774 drivers/scsi/NCR5380.c pr_err("scsi%d: bus stuck in data phase -- probably a single byte overrun!\n", pr_err 649 drivers/scsi/aacraid/commctrl.c pr_err("aacraid: upsg->sg[%d].count=%u>%u\n", pr_err 687 drivers/scsi/aacraid/linit.c pr_err("%s: Host adapter abort request (%d,%d,%d,%d)\n", pr_err 737 drivers/scsi/aacraid/linit.c pr_err("%s: Host adapter abort request timed out\n", pr_err 740 drivers/scsi/aacraid/linit.c pr_err( pr_err 909 drivers/scsi/aacraid/linit.c pr_err("%s: Host adapter reset request. SCSI hang ?\n", pr_err 967 drivers/scsi/aacraid/linit.c pr_err("%s: Host adapter reset request. SCSI hang ?\n", pr_err 1036 drivers/scsi/aacraid/linit.c pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME); pr_err 1584 drivers/scsi/aacraid/linit.c pr_err("aacraid: unable to register \"aac\" device.\n"); pr_err 3840 drivers/scsi/arcmsr/arcmsr_hba.c pr_err("arcmsr%d: can't set driver mode.\n", pr_err 784 drivers/scsi/atari_scsi.c pr_err(PFX "can't allocate ST-RAM double buffer\n"); pr_err 811 drivers/scsi/atari_scsi.c pr_err(PFX "request irq %d failed, aborting\n", pr_err 49 drivers/scsi/be2iscsi/be_iscsi.c pr_err("beiscsi_session_create: invalid ep\n"); pr_err 1143 drivers/scsi/be2iscsi/be_iscsi.c pr_err("beiscsi_ep_connect shost is NULL\n"); pr_err 1777 drivers/scsi/bnx2fc/bnx2fc_fcoe.c pr_err(PFX "Unknown device id 0x%x\n", pdev->device); pr_err 2090 drivers/scsi/bnx2fc/bnx2fc_fcoe.c pr_err(PFX "__bnx2fc_disable: lport not found\n"); pr_err 2118 drivers/scsi/bnx2fc/bnx2fc_fcoe.c pr_err(PFX "bnx2fc_disable: interface not found\n"); pr_err 2188 drivers/scsi/bnx2fc/bnx2fc_fcoe.c pr_err(PFX "__bnx2fc_enable: lport not found\n"); pr_err 2245 drivers/scsi/bnx2fc/bnx2fc_fcoe.c pr_err(PFX "bnx2fc_enable: interface not found\n"); pr_err 192 drivers/scsi/bnx2fc/bnx2fc_io.c pr_err(PFX "0x%x: sc_cmd->device is NULL.\n", io_req->xid); pr_err 196 drivers/scsi/bnx2fc/bnx2fc_io.c pr_err(PFX "0x%x: sc_cmd->device->host is NULL.\n", pr_err 1712 drivers/scsi/bnx2fc/bnx2fc_io.c pr_err("bd_count = %d exceeded FW supported max BD(255), task_id = 0x%x\n", pr_err 146 drivers/scsi/bnx2fc/bnx2fc_tgt.c pr_err(PFX "enable session failed\n"); pr_err 779 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("%s: tid %u, CPL_ISCSI_HDR, skb len %u < %u.\n", pr_err 789 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("%s: tid %u, copy cpl_ddp %u-%zu failed %d.\n", pr_err 814 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("%s: tid %u, cp %zu/%u failed %d.\n", pr_err 974 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("NO l2t available.\n"); pr_err 981 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("NO atid available.\n"); pr_err 1134 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("cdev 0x%p, clear ddp, %u,%d/%u, skb OOM.\n", pr_err 1224 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("%s, failed to get iscsi param %d.\n", pr_err 1258 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c pr_err("T3 %s fail to set iscsi param %d.\n", pr_err 822 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("NO conn. for atid %u, cdev 0x%p.\n", atid, cdev); pr_err 827 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("bad conn atid %u, csk 0x%p,%u,0x%lx,tid %u, atid %u.\n", pr_err 974 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("NO matching conn. atid %u, tid %u.\n", atid, tid); pr_err 1020 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1041 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1081 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1153 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1156 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("csk 0x%p, tid %u, rcv cpl_rx_data.\n", csk, tid); pr_err 1175 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find conn. for tid %u.\n", tid); pr_err 1281 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find conn. for tid %u.\n", tid); pr_err 1377 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1398 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("tid 0x%x, rcv RX_DATA_DDP w/o pdu bhs.\n", csk->tid); pr_err 1445 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1482 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("Error! freelist data not found 0x%p, tid %u\n", pr_err 1532 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1553 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("can't find conn. for tid %u.\n", tid); pr_err 1562 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("csk 0x%p,%u, SET_TCB_RPL status %u.\n", pr_err 1712 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("address family 0x%x not supported\n", csk->csk_family); pr_err 1719 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("%s, can't get neighbour of csk->dst.\n", ndev->name); pr_err 1728 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("%s, NO atid available.\n", ndev->name); pr_err 1744 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("%s, cannot alloc l2t.\n", ndev->name); pr_err 1817 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("%s, try_module_get failed.\n", ndev->name); pr_err 1924 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("%s: %s idx %u, npods %u, OOM.\n", pr_err 2217 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c pr_err("No handler for opcode 0x%x.\n", opc); pr_err 446 drivers/scsi/cxgbi/libcxgbi.c pr_err("cdev 0x%p, p#%u %s, NO port map.\n", pr_err 457 drivers/scsi/cxgbi/libcxgbi.c pr_err("source port NON-ZERO %u.\n", pr_err 514 drivers/scsi/cxgbi/libcxgbi.c pr_err("cdev 0x%p, p#%u %s, port %u OOR.\n", pr_err 947 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p,%u,0x%lx,%u,ABT_RPL_RSS.\n", pr_err 980 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p,%u,0x%lx,%u, bad state.\n", pr_err 1012 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p,%u,0x%lx,%u, bad state.\n", pr_err 1039 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p,%u,0x%lx,%u, cr %u,%u+%u, empty.\n", pr_err 1134 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p, tid %u, credit %u + %u != %u.\n", pr_err 1177 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p, skb head %u < %u.\n", pr_err 1184 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p, frags %d, %u,%u >%u.\n", pr_err 1742 drivers/scsi/cxgbi/libcxgbi.c pr_err("coalesced bhs, csk 0x%p, skb 0x%p,%u, " pr_err 1752 drivers/scsi/cxgbi/libcxgbi.c pr_err("coalesced data, csk 0x%p, skb 0x%p,%u, " pr_err 1760 drivers/scsi/cxgbi/libcxgbi.c pr_err("bhs, csk 0x%p, skb 0x%p,%u, " pr_err 1773 drivers/scsi/cxgbi/libcxgbi.c pr_err("csk 0x%p, skb 0x%p,%u, f 0x%lx," pr_err 1785 drivers/scsi/cxgbi/libcxgbi.c pr_err("data, csk 0x%p, skb 0x%p,%u, " pr_err 2096 drivers/scsi/cxgbi/libcxgbi.c pr_err("task 0x%p, ppod writing using ofldq failed.\n", pr_err 2229 drivers/scsi/cxgbi/libcxgbi.c pr_err("MaxRecvDataSegmentLength %u > %u.\n", pr_err 2434 drivers/scsi/cxgbi/libcxgbi.c pr_err("missing endpoint.\n"); pr_err 2694 drivers/scsi/cxgbi/libcxgbi.c pr_err("unable to register %s transport 0x%p.\n", pr_err 3900 drivers/scsi/cxlflash/main.c pr_err("%s: alloc_chrdev_region failed rc=%d\n", __func__, rc); pr_err 3909 drivers/scsi/cxlflash/main.c pr_err("%s: class_create failed rc=%d\n", __func__, rc); pr_err 80 drivers/scsi/cxlflash/vlun.c pr_err("%s: Failed to allocate lun_info lun_id=%016llx\n", pr_err 95 drivers/scsi/cxlflash/vlun.c pr_err("%s: Failed to allocate lun allocation map: " pr_err 125 drivers/scsi/cxlflash/vlun.c pr_err("%s: Failed to allocate clone map: lun_id=%016llx\n", pr_err 129 drivers/scsi/fnic/fnic_debugfs.c pr_err("fnic: Cannot read to any debugfs file\n"); pr_err 180 drivers/scsi/fnic/fnic_debugfs.c pr_err("fnic: cannot write to any debugfs file\n"); pr_err 568 drivers/scsi/fnic/fnic_trace.c pr_err("fnic: Failed to allocate memory for " pr_err 582 drivers/scsi/fnic/fnic_trace.c pr_err("fnic:Failed to allocate memory for page_offset\n"); pr_err 584 drivers/scsi/fnic/fnic_trace.c pr_err("fnic: Freeing FC Control Trace Buf\n"); pr_err 337 drivers/scsi/fnic/vnic_dev.c pr_err("%s: devcmd2 invalid posted or fetch index on cmd %d\n", pr_err 339 drivers/scsi/fnic/vnic_dev.c pr_err("%s: fetch index: %u, posted index: %u\n", pr_err 349 drivers/scsi/fnic/vnic_dev.c pr_err("%s: devcmd2 wq full while issuing cmd %d\n", pr_err 351 drivers/scsi/fnic/vnic_dev.c pr_err("%s: fetch index: %u, posted index: %u\n", pr_err 394 drivers/scsi/fnic/vnic_dev.c pr_err("%s:Error %d devcmd %d\n", pr_err 408 drivers/scsi/fnic/vnic_dev.c pr_err("%s:Timed out devcmd %d\n", pci_name(vdev->pdev), _CMD_N(cmd)); pr_err 446 drivers/scsi/fnic/vnic_dev.c pr_err("error in devcmd2 init"); pr_err 745 drivers/scsi/fnic/vnic_dev.c pr_err("Can't add addr [%pM], %d\n", addr, err); pr_err 760 drivers/scsi/fnic/vnic_dev.c pr_err("Can't del addr [%pM], %d\n", addr, err); pr_err 945 drivers/scsi/fnic/vnic_dev.c pr_err("fnic: DEVCMD2 resource found!\n"); pr_err 948 drivers/scsi/fnic/vnic_dev.c pr_err("fnic: DEVCMD2 not found, fall back to Devcmd\n"); pr_err 142 drivers/scsi/fnic/vnic_wq.c pr_err("Failed to get devcmd2 resource\n"); pr_err 363 drivers/scsi/g_NCR5380.c pr_err(DRV_MODULE_NAME ": unknown register offsets\n"); pr_err 2933 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c pr_err("Issue occur when reading IOST/ITCT cache!\n"); pr_err 4114 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c pr_err("rc %d from get_system_info\n", rc); pr_err 4120 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c pr_err("failed class register\n"); pr_err 4126 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c pr_err("rc %d from target_register_template\n", rc); pr_err 4132 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c pr_err("rc %d from vio_register_driver\n", rc); pr_err 175 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("fail to map %p %d\n", iue, pr_err 222 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("Can't get dma memory %u\n", pr_err 233 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("Error copying indirect table %d\n", err); pr_err 237 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("This command uses external indirect buffer\n"); pr_err 246 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("fail to map %p %d\n", iue, pr_err 285 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("client error. Invalid data_out_format %x\n", fmt); pr_err 331 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("Unknown format %d %x\n", dir, format); pr_err 365 drivers/scsi/ibmvscsi_tgt/libsrp.c pr_err("invalid data format %x\n", fmt); pr_err 934 drivers/scsi/libfc/fc_exch.c pr_err("host%u: lport %6.6x: xid %d invalid CPU %d\n:", pr_err 545 drivers/scsi/libsas/sas_ata.c pr_err("ata host alloc failed.\n"); pr_err 553 drivers/scsi/libsas/sas_ata.c pr_err("ata_sas_port_alloc failed.\n"); pr_err 474 drivers/scsi/libsas/sas_discover.c pr_err("unhandled device %d\n", dev->dev_type); pr_err 605 drivers/scsi/libsas/sas_expander.c pr_err("ex %016llx phy%02d PHY control failed: %d\n", pr_err 608 drivers/scsi/libsas/sas_expander.c pr_err("ex %016llx phy%02d PHY control failed: function result 0x%x\n", pr_err 831 drivers/scsi/libsas/sas_expander.c pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n", pr_err 2151 drivers/scsi/libsas/sas_expander.c pr_err("%s: can we send a smp request to a device?\n", pr_err 2158 drivers/scsi/libsas/sas_expander.c pr_err("%s: fail to find a domain_device?\n", __func__); pr_err 135 drivers/scsi/libsas/sas_port.c pr_err("%s: couldn't find a free port, bug?\n", __func__); pr_err 669 drivers/scsi/libsas/sas_scsi_host.c pr_err("error from device %llx, LUN %llx couldn't be recovered in any way\n", pr_err 5503 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("\nRead mbox command (x%x), " pr_err 5511 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("\nRead mbox buffer (x%x), " pr_err 5519 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("\nWrite mbox command (x%x), " pr_err 5527 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("\nWrite mbox buffer (x%x), " pr_err 5539 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("%s\n", line_buf); pr_err 5550 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("%s\n", line_buf); pr_err 5599 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("Mailbox command:0x%x dump by word:\n", pr_err 5605 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("%s\n", line_buf); pr_err 5618 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("%s\n", line_buf); pr_err 5619 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("\n"); pr_err 5622 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("Mailbox command:0x%x dump by byte:\n", pr_err 5628 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("%s\n", line_buf); pr_err 5646 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("%s\n", line_buf); pr_err 5647 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("\n"); pr_err 5821 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("lpfc_debugfs_max_disc_trc changed to " pr_err 5914 drivers/scsi/lpfc/lpfc_debugfs.c pr_err("lpfc_debugfs_max_disc_trc changed to %d\n", pr_err 433 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("%s WQ: WQ[Idx:%d|Qid:%d]\n", pr_err 436 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("%s WQ: WQ[Qid:%d]\n", pr_err 486 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("Couldn't find EQ for CQ. Using EQ[0]\n"); pr_err 492 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("%s CQ: WQ[Idx:%d|Qid%d]->CQ[Idx%d|Qid%d]" pr_err 497 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("%s CQ: WQ[Qid:%d]->CQ[Qid:%d]" pr_err 520 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("EQ[Idx:%d|Qid:%d]\n", qidx, qp->queue_id); pr_err 570 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("IO WQ[Idx:%d|Qid:%d]\n", wq_idx, qid); pr_err 576 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("ELS WQ[Qid:%d]\n", qid); pr_err 582 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("NVME LS WQ[Qid:%d]\n", qid); pr_err 644 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("IO CQ[Idx:%d|Qid:%d]\n", cq_idx, qid); pr_err 650 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("ELS CQ[Qid:%d]\n", qid); pr_err 656 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("NVME LS CQ[Qid:%d]\n", qid); pr_err 662 drivers/scsi/lpfc/lpfc_debugfs.h pr_err("MBX CQ[Qid:%d]\n", qid); pr_err 75 drivers/scsi/mac_scsi.c pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>[,<toshiba_delay>]]]]]]\n"); pr_err 3333 drivers/scsi/megaraid/megaraid_sas_base.c pr_err("megasas: could not set enable_sdev_max_qd\n"); pr_err 1415 drivers/scsi/mpt3sas/mpt3sas_base.c pr_err("mpt3sas: DIVISOR is zero, in div fn\n"); pr_err 2865 drivers/scsi/mpt3sas/mpt3sas_base.c pr_err("%s: unable to allocate interrupt %d!\n", pr_err 4613 drivers/scsi/mpt3sas/mpt3sas_base.c pr_err("%s: overriding NVDATA EEDPTagMode setting\n", pr_err 167 drivers/scsi/mpt3sas/mpt3sas_base.h pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__) pr_err 626 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 695 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__, pr_err 743 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 751 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 763 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 898 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1041 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 1053 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 1075 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 1176 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1194 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1207 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1225 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1245 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1265 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1286 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1308 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1445 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1460 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1733 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1760 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 1828 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 2010 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 2094 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 2269 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 2313 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 2363 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("failure at %s:%d/%s()!\n", pr_err 3688 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("%s can't register misc device [minor=%d]\n", pr_err 3696 drivers/scsi/mpt3sas/mpt3sas_ctl.c pr_err("%s can't register misc device [minor=%d]\n", pr_err 341 drivers/scsi/mpt3sas/mpt3sas_transport.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 1106 drivers/scsi/mpt3sas/mpt3sas_transport.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 1396 drivers/scsi/mpt3sas/mpt3sas_transport.c pr_err("failure at %s:%d/%s()!\n", __FILE__, pr_err 22 drivers/scsi/qedf/qedf_dbg.c pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&(qedf->pdev->dev)), pr_err 25 drivers/scsi/qedf/qedf_dbg.c pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); pr_err 165 drivers/scsi/qedf/qedf_dbg.c pr_err("Unable to create sysfs %s attr, err(%d).\n", pr_err 23 drivers/scsi/qedi/qedi_dbg.c pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev), pr_err 26 drivers/scsi/qedi/qedi_dbg.c pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf); pr_err 116 drivers/scsi/qedi/qedi_dbg.c pr_err("Unable to create sysfs %s attr, err(%d).\n", pr_err 2645 drivers/scsi/qla2xxx/qla_dbg.c pr_err("%s%pV", pbuf, &vaf); pr_err 2699 drivers/scsi/qla2xxx/qla_dbg.c pr_err("%s%pV", pbuf, &vaf); pr_err 2804 drivers/scsi/qla2xxx/qla_dbg.c pr_err("%s%pV", pbuf, &vaf); pr_err 390 drivers/scsi/qla2xxx/qla_dfs.c pr_err("host%ld: this adapter does not support Multi Q.", pr_err 396 drivers/scsi/qla2xxx/qla_dfs.c pr_err("host%ld: Driver is not setup with Multi Q.", pr_err 402 drivers/scsi/qla2xxx/qla_dfs.c pr_err("host%ld: fail to copy user buffer.", pr_err 410 drivers/scsi/qla2xxx/qla_dfs.c pr_err("User set invalid number of qpairs %lu. Max = %d", pr_err 441 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct fc_port from qla_tgt_cmd\n"); pr_err 447 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate active struct se_session\n"); pr_err 845 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("kstrtoul() failed with" \ pr_err 851 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Illegal boolean value %lu\n", val); \ pr_err 910 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("kstrtoul() returned %d\n", rc); pr_err 914 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Illegal value for tpg_enable: %lu\n", op); pr_err 950 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("kstrtoul() returned %d for fabric_prot_type\n", ret); pr_err 954 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Invalid qla2xxx fabric_prot_type: %lu\n", val); pr_err 998 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("In non NPIV mode, a single TPG=1 is used for HW port mappings\n"); pr_err 1004 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to allocate struct tcm_qla2xxx_tpg\n"); pr_err 1072 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("kstrtoul() returned %d\n", rc); pr_err 1076 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Illegal value for tpg_enable: %lu\n", op); pr_err 1119 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to allocate struct tcm_qla2xxx_tpg\n"); pr_err 1156 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct tcm_qla2xxx_lport\n"); pr_err 1174 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct fc_port\n"); pr_err 1261 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct tcm_qla2xxx_lport\n"); pr_err 1279 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct fc_port\n"); pr_err 1376 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("struct fc_port->se_sess is NULL\n"); pr_err 1383 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct tcm_qla2xxx_lport\n"); pr_err 1439 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct tcm_qla2xxx_lport\n"); pr_err 1448 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate struct tcm_qla2xxx_lport->tpg_1\n"); pr_err 1572 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to initialize lport->lport_fcport_map btree\n"); pr_err 1580 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to allocate lport->lport_loopid_map of %zu bytes\n", pr_err 1621 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to allocate struct tcm_qla2xxx_lport\n"); pr_err 1686 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("qla2xxx base_vha not enabled for target mode\n"); pr_err 1692 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("qla2xxx base_lport or tpg_1 not available\n"); pr_err 1705 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("fc_vport_create failed for qla2xxx_npiv\n"); pr_err 1733 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to locate NPIV '@' separator\n"); pr_err 1747 drivers/scsi/qla2xxx/tcm_qla2xxx.c pr_err("Unable to allocate struct tcm_qla2xxx_lport for NPIV\n"); pr_err 1686 drivers/scsi/qla4xxx/ql4_os.c pr_err("%s: shost is NULL\n", __func__); pr_err 2568 drivers/scsi/scsi_debug.c pr_err("GUARD check failed on sector %lu rcvd 0x%04x, data 0x%04x\n", pr_err 2576 drivers/scsi/scsi_debug.c pr_err("REF check failed on sector %lu\n", pr_err 2582 drivers/scsi/scsi_debug.c pr_err("REF check failed on sector %lu\n", pr_err 2797 drivers/scsi/scsi_debug.c pr_err(">>> Sector Dump <<<\n"); pr_err 2811 drivers/scsi/scsi_debug.c pr_err("%04d: %s\n", i, b); pr_err 3628 drivers/scsi/scsi_debug.c pr_err("alloc len too small %d\n", alloc_len); pr_err 3730 drivers/scsi/scsi_debug.c pr_err("wild qc_idx=%d\n", qc_idx); pr_err 3738 drivers/scsi/scsi_debug.c pr_err("scp is NULL, sqa_idx=%d, qc_idx=%d\n", pr_err 3746 drivers/scsi/scsi_debug.c pr_err("devip=NULL\n"); pr_err 3753 drivers/scsi/scsi_debug.c pr_err("Unexpected completion\n"); pr_err 3763 drivers/scsi/scsi_debug.c pr_err("index %d too large\n", retval); pr_err 3833 drivers/scsi/scsi_debug.c pr_err("Host info NULL\n"); pr_err 3849 drivers/scsi/scsi_debug.c pr_err("out of memory at line %d\n", __LINE__); pr_err 4781 drivers/scsi/scsi_debug.c pr_err("out of memory, 9\n"); pr_err 5248 drivers/scsi/scsi_debug.c pr_err("invalid sector_size %d\n", sdebug_sector_size); pr_err 5262 drivers/scsi/scsi_debug.c pr_err("dif must be 0, 1, 2 or 3\n"); pr_err 5267 drivers/scsi/scsi_debug.c pr_err("num_tgts must be >= 0\n"); pr_err 5272 drivers/scsi/scsi_debug.c pr_err("guard must be 0 or 1\n"); pr_err 5277 drivers/scsi/scsi_debug.c pr_err("ato must be 0 or 1\n"); pr_err 5282 drivers/scsi/scsi_debug.c pr_err("invalid physblk_exp %u\n", sdebug_physblk_exp); pr_err 5291 drivers/scsi/scsi_debug.c pr_err("lowest_aligned too big: %u\n", sdebug_lowest_aligned); pr_err 5296 drivers/scsi/scsi_debug.c pr_err("submit_queues must be 1 or more\n"); pr_err 5332 drivers/scsi/scsi_debug.c pr_err("out of memory, 1\n"); pr_err 5346 drivers/scsi/scsi_debug.c pr_err("dif_storep %u bytes @ %p\n", dif_size, dif_storep); pr_err 5349 drivers/scsi/scsi_debug.c pr_err("out of mem. (DIX)\n"); pr_err 5371 drivers/scsi/scsi_debug.c pr_err("ERR: unmap_granularity <= unmap_alignment\n"); pr_err 5383 drivers/scsi/scsi_debug.c pr_err("out of mem. (MAP)\n"); pr_err 5417 drivers/scsi/scsi_debug.c pr_err("sdebug_add_adapter failed k=%d\n", k); pr_err 5478 drivers/scsi/scsi_debug.c pr_err("out of memory at line %d\n", __LINE__); pr_err 5488 drivers/scsi/scsi_debug.c pr_err("out of memory at line %d\n", __LINE__); pr_err 5792 drivers/scsi/scsi_debug.c pr_err("scsi_host_alloc failed\n"); pr_err 5865 drivers/scsi/scsi_debug.c pr_err("scsi_add_host failed\n"); pr_err 5882 drivers/scsi/scsi_debug.c pr_err("Unable to locate host info\n"); pr_err 379 drivers/scsi/scsi_devinfo.c pr_err("scsi_devinfo (%s:%s): unsupported flags 0x%llx", pr_err 1447 drivers/scsi/scsi_transport_iscsi.c pr_err("Could not delete all connections for %s. Error %d.\n", pr_err 3101 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3174 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3183 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find flashnode %u for host no %u\n", pr_err 3224 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3259 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3268 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find flashnode %u for host no %u\n", pr_err 3301 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3310 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find flashnode %u for host no %u\n", pr_err 3353 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3362 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find flashnode %u for host no %u\n", pr_err 3403 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find host no %u\n", pr_err 3411 drivers/scsi/scsi_transport_iscsi.c pr_err("%s could not find session id %u\n", pr_err 3451 drivers/scsi/scsi_transport_iscsi.c pr_err("%s: failed. Could not find host no %u\n", pr_err 3461 drivers/scsi/scsi_transport_iscsi.c pr_err("cannot deliver host stats: OOM\n"); pr_err 1545 drivers/scsi/sg.c pr_err("%s: device_create failed\n", __func__); pr_err 1552 drivers/scsi/sg.c pr_err("%s: unable to make symlink 'generic' back " pr_err 173 drivers/scsi/snic/snic.h pr_err(PFX fmt, ## args) pr_err 41 drivers/scsi/snic/vnic_cq.c pr_err("Failed to hook CQ[%d] resource\n", index); pr_err 93 drivers/scsi/snic/vnic_dev.c pr_err("vNIC BAR0 res hdr length error\n"); pr_err 100 drivers/scsi/snic/vnic_dev.c pr_err("vNIC BAR0 res hdr not mem-mapped\n"); pr_err 107 drivers/scsi/snic/vnic_dev.c pr_err("vNIC BAR0 res magic/version error exp (%lx/%lx) curr (%x/%x)\n", pr_err 139 drivers/scsi/snic/vnic_dev.c pr_err("vNIC BAR0 resource %d out-of-bounds, offset 0x%x + size 0x%x > bar len 0x%lx\n", pr_err 232 drivers/scsi/snic/vnic_dev.c pr_err("Failed to allocate ring (size=%d), aborting\n", pr_err 289 drivers/scsi/snic/vnic_dev.c pr_err("%s: wq is full while issuing devcmd2 command %d, fetch index: %u, posted index: %u\n", pr_err 336 drivers/scsi/snic/vnic_dev.c pr_err("Error %d devcmd %d\n", pr_err 350 drivers/scsi/snic/vnic_dev.c pr_err("Timed out devcmd %d\n", _CMD_N(cmd)); pr_err 760 drivers/scsi/snic/vnic_dev.c pr_err("DEVCMD2 resource not found.\n"); pr_err 39 drivers/scsi/snic/vnic_intr.c pr_err("Failed to hook INTR[%d].ctrl resource\n", pr_err 52 drivers/scsi/snic/vnic_wq.c pr_err("Failed to alloc wq_bufs\n"); pr_err 109 drivers/scsi/snic/vnic_wq.c pr_err("Failed to get devcmd2 resource\n"); pr_err 133 drivers/scsi/snic/vnic_wq.c pr_err("Failed to hook WQ[%d] resource\n", index); pr_err 208 drivers/scsi/snic/vnic_wq.c pr_err("Failed to disable WQ[%d]\n", wq->index); pr_err 4185 drivers/scsi/st.c pr_err("st%d: out of memory. Device not attached.\n", dev_num); pr_err 4195 drivers/scsi/st.c pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num, pr_err 4197 drivers/scsi/st.c pr_err("st%d: Device not attached.\n", dev_num); pr_err 4208 drivers/scsi/st.c pr_err("st%d: device_create failed\n", dev_num); pr_err 4497 drivers/scsi/st.c pr_err("Unable register sysfs class for SCSI tapes\n"); pr_err 573 drivers/scsi/sun3_scsi.c pr_err(PFX "couldn't allocate DVMA memory!\n"); pr_err 599 drivers/scsi/sun3_scsi.c pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n", pr_err 809 drivers/scsi/ufs/ufs-qcom.c pr_err("%s: incoming dev_req_params is NULL\n", __func__); pr_err 848 drivers/scsi/ufs/ufs-qcom.c pr_err("%s: failed to determine capabilities\n", pr_err 1342 drivers/scsi/ufs/ufs-qcom.c pr_err("%s: hba is NULL\n", __func__); pr_err 6361 drivers/scsi/ufs/ufshcd.c pr_err("%s: Couldn't find valid icc_level = %d", __func__, i); pr_err 7531 drivers/scsi/ufs/ufshcd.c pr_err("%s: failed with err %d\n", __func__, ret); pr_err 295 drivers/scsi/virtio_scsi.c pr_err("SCSI device %d 0 %d %d not found\n", pr_err 316 drivers/scsi/virtio_scsi.c pr_err("SCSI device %d 0 %d %d not found\n", pr_err 384 drivers/scsi/virtio_scsi.c pr_err("Unsupport virtio scsi event %x\n", event->event); pr_err 987 drivers/scsi/virtio_scsi.c pr_err("kmem_cache_create() for virtscsi_cmd_cache failed\n"); pr_err 996 drivers/scsi/virtio_scsi.c pr_err("mempool_create() for virtscsi_cmd_pool failed\n"); pr_err 731 drivers/scsi/zorro_esp.c pr_err("Can't allocate device private data!\n"); pr_err 771 drivers/scsi/zorro_esp.c pr_err("cannot reserve region 0x%lx, abort\n", pr_err 780 drivers/scsi/zorro_esp.c pr_err("No host detected; board configuration problem?\n"); pr_err 807 drivers/scsi/zorro_esp.c pr_err("Cannot allocate board address space\n"); pr_err 143 drivers/sfi/sfi_core.c pr_err("Invalid table length 0x%x\n", length); pr_err 151 drivers/sfi/sfi_core.c pr_err("Checksum %2.2X should be %2.2X\n", pr_err 75 drivers/sh/clk/cpg.c pr_err("cpg: failed to enable %p[%d]\n", pr_err 220 drivers/sh/clk/cpg.c pr_err("sh_clk_init_parent: cannot select parent clock\n"); pr_err 228 drivers/sh/clk/cpg.c pr_err("sh_clk_init_parent: parent table size failed\n"); pr_err 234 drivers/sh/clk/cpg.c pr_err("sh_clk_init_parent: unable to set parent"); pr_err 254 drivers/sh/clk/cpg.c pr_err("%s: unable to alloc memory\n", __func__); pr_err 476 drivers/sh/clk/cpg.c pr_err("%s: unable to alloc memory\n", __func__); pr_err 324 drivers/sh/intc/core.c pr_err("domain association failure\n"); pr_err 328 drivers/sh/intc/core.c pr_err("can't identity map IRQ %d\n", irq); pr_err 354 drivers/sh/intc/core.c pr_err("domain association " pr_err 359 drivers/sh/intc/core.c pr_err("can't identity map IRQ %d\n", pr_err 403 drivers/sh/intc/core.c pr_err("unable to allocate INTC memory\n"); pr_err 508 drivers/sh/intc/core.c pr_err("device registration error\n"); pr_err 227 drivers/sh/intc/virq.c pr_err("no more free IRQs, bailing..\n"); pr_err 886 drivers/siox/siox-core.c pr_err("Driver %s doesn't provide needed callbacks\n", pr_err 903 drivers/siox/siox-core.c pr_err("Failed to register siox driver %s (%d)\n", pr_err 916 drivers/siox/siox-core.c pr_err("Registration of SIOX bus type failed: %d\n", ret); pr_err 384 drivers/slimbus/qcom-ngd-ctrl.c pr_err("QMI power request failed 0x%x\n", pr_err 53 drivers/slimbus/sched.c pr_err("Previous clock pause did not finish"); pr_err 153 drivers/soc/amlogic/meson-gx-socinfo.c pr_err("%s: failed to get regmap\n", __func__); pr_err 162 drivers/soc/amlogic/meson-gx-socinfo.c pr_err("%s: invalid chipid value\n", __func__); pr_err 164 drivers/soc/bcm/brcmstb/biuctrl.c pr_err("failed to remap BIU control base\n"); pr_err 173 drivers/soc/bcm/brcmstb/biuctrl.c pr_err("failed to obtain CPU device node\n"); pr_err 183 drivers/soc/bcm/brcmstb/biuctrl.c pr_err("unsupported CPU\n"); pr_err 247 drivers/soc/bcm/brcmstb/biuctrl.c pr_err("MCP: Unable to disable write pairing!\n"); pr_err 170 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error: timeout waiting for BSP (%x)\n", ret); pr_err 194 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("BSP handshake failed\n"); pr_err 359 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("standby code will not fit in SRAM\n"); pr_err 495 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("%s: standby failed\n", __func__); pr_err 689 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error mapping AON_CTRL\n"); pr_err 710 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error mapping DDR PHY\n"); pr_err 740 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error mapping DDR SHIMPHY %d\n", i); pr_err 752 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error mapping DDR Sequencer %d\n", i); pr_err 778 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("SRAM not found\n"); pr_err 784 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error setting up SRAM for PM\n"); pr_err 797 drivers/soc/bcm/brcmstb/pm/pm-arm.c pr_err("error mapping DMA memory\n"); pr_err 389 drivers/soc/bcm/brcmstb/pm/pm-mips.c pr_err("error mapping AON_CTRL\n"); pr_err 397 drivers/soc/bcm/brcmstb/pm/pm-mips.c pr_err("error mapping AON_SRAM\n"); pr_err 421 drivers/soc/bcm/brcmstb/pm/pm-mips.c pr_err("error mapping MEMC ARB\n"); pr_err 429 drivers/soc/bcm/brcmstb/pm/pm-mips.c pr_err("error mapping timers\n"); pr_err 112 drivers/soc/dove/pmu.c pr_err("pmu: %s failed: %d\n", "reset_controller_register", ret); pr_err 280 drivers/soc/dove/pmu.c pr_err("%s: unable to add irq domain\n", name); pr_err 289 drivers/soc/dove/pmu.c pr_err("%s: unable to alloc irq domain gc: %d\n", name, ret); pr_err 342 drivers/soc/dove/pmu.c pr_err("dove_init_pmu_irq() failed: %d\n", ret); pr_err 386 drivers/soc/dove/pmu.c pr_err("%pOFn: failed to find domains sub-node\n", np_pmu); pr_err 399 drivers/soc/dove/pmu.c pr_err("%pOFn: failed to map PMU\n", np_pmu); pr_err 447 drivers/soc/dove/pmu.c pr_err("%pOFn: no interrupt specified\n", np_pmu); pr_err 451 drivers/soc/dove/pmu.c pr_err("dove_init_pmu_irq() failed: %d\n", ret); pr_err 76 drivers/soc/fsl/dpaa2-console.c pr_err("could not map MC Firmware Base registers\n"); pr_err 125 drivers/soc/fsl/dpaa2-console.c pr_err("cannot map console log memory\n"); pr_err 274 drivers/soc/fsl/dpaa2-console.c pr_err("of_address_to_resource() failed for %pOF with %d\n", pr_err 281 drivers/soc/fsl/dpaa2-console.c pr_err("cannot register device %s\n", pr_err 288 drivers/soc/fsl/dpaa2-console.c pr_err("cannot register device %s\n", pr_err 212 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: the portal is not enabled!\n"); pr_err 974 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: acquire from BPID %d failed, no response\n", pr_err 984 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: acquire from BPID 0x%x failed, code=0x%02x\n", pr_err 1029 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: mgmt cmd failed, no response (verb=0x%x)\n", pr_err 1039 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: ALT FQID %d failed: verb = 0x%08x code = 0x%02x\n", pr_err 1090 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: wqchan config failed, no response\n"); pr_err 1098 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: CDAN cQID %d failed: code = 0x%02x\n", pr_err 1131 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: Query FQID %d NP fields failed, no response\n", pr_err 1141 drivers/soc/fsl/dpio/qbman-portal.c pr_err("Query NP fields of FQID 0x%x failed, code=0x%02x\n", pr_err 1179 drivers/soc/fsl/dpio/qbman-portal.c pr_err("qbman: Query BPID %d fields failed, no response\n", pr_err 1189 drivers/soc/fsl/dpio/qbman-portal.c pr_err("Query fields of BPID 0x%x failed, code=0x%02x\n", pr_err 121 drivers/soc/fsl/qbman/bman_ccsr.c pr_err("Attempted to reinitialize BMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n", pr_err 235 drivers/soc/fsl/qbman/bman_portal.c pr_err("bman: failed to register hotplug callbacks.\n"); pr_err 1220 drivers/soc/fsl/qbman/qman.c pr_err("Found verb 0x%x in MR\n", msg->verb); pr_err 2415 drivers/soc/fsl/qbman/qman.c pr_err("Warning: %d error%s while initialising CGR h/w\n", pr_err 2975 drivers/soc/fsl/qbman/qman.c pr_err("CRGID 0x%x is being used by FQID 0x%x, CGR will be leaked\n", pr_err 363 drivers/soc/fsl/qbman/qman_ccsr.c pr_err("Attempted to reinitialize QMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n", pr_err 382 drivers/soc/fsl/qbman/qman_portal.c pr_err("qman: failed to register hotplug callbacks.\n"); pr_err 168 drivers/soc/fsl/qbman/qman_test_api.c pr_err("qman_volatile_dequeue() failed\n"); pr_err 214 drivers/soc/fsl/qbman/qman_test_api.c pr_err("BADNESS: dequeued frame doesn't match;\n"); pr_err 333 drivers/soc/fsl/qe/gpio.c pr_err("%pOF: registration failed with status %d\n", pr_err 331 drivers/soc/fsl/qe/qe.c pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum); pr_err 63 drivers/soc/fsl/qe/qe_common.c pr_err("Cannot find CPM muram data node"); pr_err 71 drivers/soc/fsl/qe/qe_common.c pr_err("Cannot allocate memory pool for CPM/QE muram"); pr_err 77 drivers/soc/fsl/qe/qe_common.c pr_err("Cannot translate zero through CPM muram node"); pr_err 88 drivers/soc/fsl/qe/qe_common.c pr_err("QE: couldn't add muram to pool!\n"); pr_err 95 drivers/soc/fsl/qe/qe_common.c pr_err("Cannot map QE muram"); pr_err 259 drivers/soc/fsl/qe/qe_ic.c pr_err("%s: Invalid hw irq number for QEIC\n", __func__); pr_err 49 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: Invalid rx-sync-clock property\n"); pr_err 53 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: Invalid rx-sync-clock property\n"); pr_err 62 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: Invalid tx-sync-clock property\n"); pr_err 66 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: Invalid tx-sync-clock property\n"); pr_err 72 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: Invalid tx-timeslot-mask property\n"); pr_err 80 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: Invalid rx-timeslot-mask property\n"); pr_err 88 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: No fsl,tdm-id property for this UCC\n"); pr_err 102 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: No tdm-framer-type property for UCC\n"); pr_err 113 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: No siram entry id for UCC\n"); pr_err 215 drivers/soc/fsl/qe/qe_tdm.c pr_err("QE-TDM: can not find tdm sixmr reg\n"); pr_err 331 drivers/soc/fsl/qe/ucc_fast.c pr_err("%s: illegal value for RX clock", __func__); pr_err 340 drivers/soc/fsl/qe/ucc_fast.c pr_err("%s: illegal value for TX clock", __func__); pr_err 349 drivers/soc/fsl/qe/ucc_fast.c pr_err("%s: illegal value for RX clock", __func__); pr_err 358 drivers/soc/fsl/qe/ucc_fast.c pr_err("%s: illegal value for TX clock", __func__); pr_err 37 drivers/soc/fsl/qe/usb.c pr_err("%s: requested unknown clock %d\n", __func__, clk); pr_err 96 drivers/soc/imx/gpc.c pr_err("%s: failed to enable regulator: %d\n", pr_err 118 drivers/soc/imx/gpc.c pr_err("powerup request on domain %s timed out\n", genpd->name); pr_err 51 drivers/soc/imx/soc-imx-scu.c pr_err("%s: get soc uid failed, ret %d\n", __func__, ret); pr_err 80 drivers/soc/imx/soc-imx-scu.c pr_err("%s: get soc info failed, ret %d\n", __func__, ret); pr_err 209 drivers/soc/qcom/qmi_encdec.c pr_err("%s: STRUCT Encode failure\n", __func__); pr_err 250 drivers/soc/qcom/qmi_encdec.c pr_err("%s: String to be encoded is longer - %d > %d\n", pr_err 258 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Output len %d > Out Buf len %d\n", pr_err 264 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Output len %d > Out Buf len %d\n", pr_err 326 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Invalid data length\n", __func__); pr_err 347 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Too Small Buffer @DATA_LEN\n", pr_err 372 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Too Small Buffer @data_type:%d\n", pr_err 407 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Unrecognized data type\n", __func__); pr_err 491 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Fault in decoding: dl(%d), db(%d), tl(%d), i(%d), el(%d)\n", pr_err 538 drivers/soc/qcom/qmi_encdec.c pr_err("%s: String len %d > Max Len %d\n", pr_err 542 drivers/soc/qcom/qmi_encdec.c pr_err("%s: String len %d > Input Buffer Len %d\n", pr_err 620 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Inval element info\n", __func__); pr_err 659 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Data len %d > max spec %d\n", pr_err 695 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Unrecognized data type\n", __func__); pr_err 728 drivers/soc/qcom/qmi_encdec.c pr_err("%s: Calc. len %d != 0, but NULL c_struct\n", pr_err 188 drivers/soc/qcom/qmi_interface.c pr_err("failed to send lookup registration: %d\n", ret); pr_err 253 drivers/soc/qcom/qmi_interface.c pr_err("send service registration failed: %d\n", ret); pr_err 323 drivers/soc/qcom/qmi_interface.c pr_err("failed to allocate transaction id\n"); pr_err 415 drivers/soc/qcom/qmi_interface.c pr_err("failed to decode incoming message\n"); pr_err 481 drivers/soc/qcom/qmi_interface.c pr_err("ignoring short QMI packet\n"); pr_err 504 drivers/soc/qcom/qmi_interface.c pr_err("failed to decode incoming message\n"); pr_err 553 drivers/soc/qcom/qmi_interface.c pr_err("qmi recvmsg failed: %zd\n", msglen); pr_err 658 drivers/soc/qcom/qmi_interface.c pr_err("failed to create QMI socket\n"); pr_err 761 drivers/soc/qcom/qmi_interface.c pr_err("failed to send QMI message\n"); pr_err 310 drivers/soc/qcom/rmtfs_mem.c pr_err("qcom_rmtfs_mem: failed to allocate char dev region\n"); pr_err 316 drivers/soc/qcom/rmtfs_mem.c pr_err("qcom_rmtfs_mem: failed to register rmtfs_mem driver\n"); pr_err 233 drivers/soc/qcom/rpmh-rsc.c pr_err("Incomplete request: %s: addr=%#x data=%#x", pr_err 513 drivers/soc/qcom/rpmh-rsc.c pr_err("Payload error\n"); pr_err 395 drivers/soc/qcom/rpmh.c pr_err("Error(%d) sending RPMH message addr=%#x\n", pr_err 59 drivers/soc/renesas/r9a06g032-smp.c pr_err("CPU#1: missing device tree node\n"); pr_err 82 drivers/soc/renesas/r9a06g032-smp.c pr_err("CPU#1: invalid cpu-release-addr property\n"); pr_err 258 drivers/soc/renesas/rcar-sysc.c pr_err("Failed to init PM domain %s: %d\n", name, error); pr_err 150 drivers/soc/rockchip/grf.c pr_err("%s: missing grf data\n", __func__); pr_err 158 drivers/soc/rockchip/grf.c pr_err("%s: could not get grf syscon\n", __func__); pr_err 169 drivers/soc/rockchip/grf.c pr_err("%s: write to %#6x failed with %d\n", pr_err 81 drivers/soc/samsung/exynos-chipid.c pr_err("Unknown SoC\n"); pr_err 55 drivers/soc/samsung/pm_domains.c pr_err("Power domain %s %s failed\n", domain->name, op); pr_err 186 drivers/soc/tegra/flowctrl.c pr_err("failed to get flowctrl register\n"); pr_err 307 drivers/soc/tegra/fuse/fuse-tegra.c pr_err("failed to get FUSE register\n"); pr_err 321 drivers/soc/tegra/fuse/fuse-tegra.c pr_err("failed to map clock registers\n"); pr_err 328 drivers/soc/tegra/fuse/fuse-tegra.c pr_err("failed to map FUSE registers\n"); pr_err 361 drivers/soc/tegra/fuse/fuse-tegra.c pr_err("failed to register SoC device: %ld\n", PTR_ERR(soc)); pr_err 58 drivers/soc/tegra/fuse/speedo-tegra114.c pr_err("Tegra Unknown SKU %d\n", sku); pr_err 96 drivers/soc/tegra/fuse/speedo-tegra124.c pr_err("Tegra Unknown SKU %d\n", sku); pr_err 86 drivers/soc/tegra/fuse/speedo-tegra210.c pr_err("Tegra210: unknown SKU %#04x\n", sku); pr_err 143 drivers/soc/tegra/fuse/speedo-tegra30.c pr_err("Tegra Unknown pkg %d\n", package_id); pr_err 160 drivers/soc/tegra/fuse/speedo-tegra30.c pr_err("Tegra Unknown pkg %d\n", package_id); pr_err 177 drivers/soc/tegra/fuse/speedo-tegra30.c pr_err("Tegra Unknown pkg %d\n", package_id); pr_err 214 drivers/soc/tegra/fuse/speedo-tegra30.c pr_err("Tegra Unknown pkg %d\n", package_id); pr_err 152 drivers/soc/tegra/fuse/tegra-apbmisc.c pr_err("failed to get APBMISC registers\n"); pr_err 157 drivers/soc/tegra/fuse/tegra-apbmisc.c pr_err("failed to get strapping options registers\n"); pr_err 164 drivers/soc/tegra/fuse/tegra-apbmisc.c pr_err("failed to map APBMISC registers\n"); pr_err 168 drivers/soc/tegra/fuse/tegra-apbmisc.c pr_err("failed to map strapping options registers\n"); pr_err 683 drivers/soc/tegra/pmc.c pr_err("failed to acquire resets: %d\n", err); pr_err 967 drivers/soc/tegra/pmc.c pr_err("failed to acquire resets: %d\n", err); pr_err 2889 drivers/soc/tegra/pmc.c pr_err("failed to get PMC registers\n"); pr_err 2897 drivers/soc/tegra/pmc.c pr_err("failed to map PMC registers\n"); pr_err 435 drivers/soc/ti/knav_dma.c pr_err("keystone-navigator-dma driver not registered\n"); pr_err 521 drivers/soc/ti/knav_dma.c pr_err("keystone-navigator-dma driver not registered\n"); pr_err 459 drivers/soc/ti/pm33xx.c pr_err("PM: Could not ioremap GIC base\n"); pr_err 471 drivers/soc/ti/pm33xx.c pr_err("PM: Cannot get wkup_m3_ipc handle\n"); pr_err 115 drivers/soc/ux500/ux500-soc-id.c pr_err("Unable to identify SoC\n"); pr_err 86 drivers/soc/xilinx/zynqmp_pm_domains.c pr_err("%s() %s set requirement for node %d failed: %d\n", pr_err 142 drivers/soc/xilinx/zynqmp_pm_domains.c pr_err("%s() %s set requirement for node %d failed: %d\n", pr_err 177 drivers/soc/xilinx/zynqmp_pm_domains.c pr_err("%s() %s request failed for node %d: %d\n", pr_err 212 drivers/soc/xilinx/zynqmp_pm_domains.c pr_err("%s() %s release failed for node %d: %d\n", pr_err 63 drivers/soc/xilinx/zynqmp_power.c pr_err("%s Unsupported InitSuspendCb reason " pr_err 43 drivers/soc/zte/zx2967_pm_domains.c pr_err("Error: %s %s fail\n", __func__, domain->name); pr_err 102 drivers/soc/zte/zx2967_pm_domains.c pr_err("Error: %s %s fail\n", __func__, domain->name); pr_err 24 drivers/soundwire/bus.c pr_err("SoundWire bus has no device\n"); pr_err 287 drivers/soundwire/bus.c pr_err("SDW: Invalid address %x passed\n", addr); pr_err 299 drivers/soundwire/bus.c pr_err("SDW: Invalid device for paging :%d\n", dev_num); pr_err 304 drivers/soundwire/bus.c pr_err("SDW: No slave for paging addr\n"); pr_err 151 drivers/soundwire/bus_type.c pr_err("driver %s didn't provide SDW probe routine\n", pr_err 177 drivers/soundwire/intel_init.c pr_err("%s: Couldn't find ACPI handle\n", __func__); pr_err 1507 drivers/soundwire/stream.c pr_err("Configuration error in %s\n", __func__); pr_err 1550 drivers/soundwire/stream.c pr_err("SoundWire: Handle not found for stream\n"); pr_err 1558 drivers/soundwire/stream.c pr_err("Prepare for stream:%s failed: %d\n", stream->name, ret); pr_err 1592 drivers/soundwire/stream.c pr_err("Configuration error in %s\n", __func__); pr_err 1618 drivers/soundwire/stream.c pr_err("SoundWire: Handle not found for stream\n"); pr_err 1626 drivers/soundwire/stream.c pr_err("Enable for stream:%s failed: %d\n", stream->name, ret); pr_err 1663 drivers/soundwire/stream.c pr_err("Bank switch failed: %d\n", ret); pr_err 1694 drivers/soundwire/stream.c pr_err("SoundWire: Handle not found for stream\n"); pr_err 1702 drivers/soundwire/stream.c pr_err("Disable for stream:%s failed: %d\n", stream->name, ret); pr_err 1753 drivers/soundwire/stream.c pr_err("SoundWire: Handle not found for stream\n"); pr_err 1760 drivers/soundwire/stream.c pr_err("De-prepare for stream:%d failed: %d\n", ret, ret); pr_err 3706 drivers/spi/spi.c pr_err("%s: failed to create for '%pOF'\n", pr_err 122 drivers/ssb/driver_chipcommon_sflash.c pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", pr_err 137 drivers/ssb/driver_chipcommon_sflash.c pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", pr_err 144 drivers/ssb/driver_chipcommon_sflash.c pr_err("Unsupported flash type\n"); pr_err 522 drivers/ssb/main.c pr_err("Could not register %s\n", dev_name(dev)); pr_err 536 drivers/ssb/main.c pr_err("Error registering parallel flash\n"); pr_err 544 drivers/ssb/main.c pr_err("Error registering serial flash\n"); pr_err 1175 drivers/ssb/main.c pr_err("Bus powerdown failed\n"); pr_err 1196 drivers/ssb/main.c pr_err("Bus powerup failed\n"); pr_err 1304 drivers/ssb/main.c pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); pr_err 1310 drivers/ssb/main.c pr_err("PCMCIA host initialization failed\n"); pr_err 1316 drivers/ssb/main.c pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); pr_err 59 drivers/ssb/pci.c pr_err("Failed to switch to core %u\n", coreidx); pr_err 163 drivers/ssb/pci.c pr_err("Error: ssb_pci_xtal() could not access PCI config space!\n"); pr_err 323 drivers/ssb/pci.c pr_err("Could not access SPROM control register.\n"); pr_err 864 drivers/ssb/pci.c pr_err("No SPROM available!\n"); pr_err 953 drivers/ssb/pci.c pr_err("FATAL ERROR: Bus powered down while accessing PCI MMIO space\n"); pr_err 146 drivers/ssb/pcmcia.c pr_err("Failed to switch to core %u\n", coreidx); pr_err 192 drivers/ssb/pcmcia.c pr_err("Failed to switch pcmcia segment\n"); pr_err 691 drivers/ssb/pcmcia.c pr_err("PCMCIA: Failed to fetch device invariants: %s\n", pr_err 712 drivers/ssb/pcmcia.c pr_err("PCMCIA: Failed to fetch MAC address\n"); pr_err 722 drivers/ssb/pcmcia.c pr_err("PCMCIA: Failed to fetch device invariants\n"); pr_err 831 drivers/ssb/pcmcia.c pr_err("Failed to initialize PCMCIA host device\n"); pr_err 154 drivers/ssb/scan.c pr_err("CHIPID not in nrcores fallback list\n"); pr_err 326 drivers/ssb/scan.c pr_err("More than %d ssb cores found (%d)\n", pr_err 130 drivers/ssb/sprom.c pr_err("SPROM write: Could not freeze all devices\n"); pr_err 136 drivers/ssb/sprom.c pr_err("SPROM write: Could not thaw all devices\n"); pr_err 206 drivers/ssb/ssb_private.h pr_err("Serial flash not supported\n"); pr_err 918 drivers/staging/android/ashmem.c pr_err("failed to create slab cache\n"); pr_err 926 drivers/staging/android/ashmem.c pr_err("failed to create slab cache\n"); pr_err 932 drivers/staging/android/ashmem.c pr_err("failed to register misc device!\n"); pr_err 938 drivers/staging/android/ashmem.c pr_err("failed to register shrinker!\n"); pr_err 250 drivers/staging/android/ion/ion.c pr_err("%s: this heap does not define a method for mapping to userspace\n", pr_err 264 drivers/staging/android/ion/ion.c pr_err("%s: failure mapping buffer to userspace\n", pr_err 584 drivers/staging/android/ion/ion.c pr_err("%s: can not add heap with invalid ops struct.\n", pr_err 597 drivers/staging/android/ion/ion.c pr_err("%s: Failed to register shrinker\n", __func__); pr_err 657 drivers/staging/android/ion/ion.c pr_err("ion: failed to register misc device.\n"); pr_err 254 drivers/staging/android/ion/ion_heap.c pr_err("%s: creating thread for deferred free failed\n", pr_err 130 drivers/staging/board/board.c pr_err("Failed to alias clock %s (%d)\n", bsc->clk, error); pr_err 144 drivers/staging/board/board.c pr_err("Cannot find domain node %s\n", domain); pr_err 184 drivers/staging/board/board.c pr_err("Failed to register device %s (%d)\n", pdev->name, pr_err 3003 drivers/staging/comedi/comedi_fops.c pr_err("invalid value for module parameter \"comedi_num_legacy_minors\". Valid values are 0 through %i.\n", pr_err 3028 drivers/staging/comedi/comedi_fops.c pr_err("failed to create class\n"); pr_err 795 drivers/staging/comedi/drivers/comedi_test.c pr_err("comedi_test: unable to register driver\n"); pr_err 36 drivers/staging/comedi/drivers/tests/unittest.h pr_err("FAIL %s():%i " fmt, __func__, __LINE__, \ pr_err 103 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s udc == NULL\n", __func__); pr_err 2426 drivers/staging/emxx_udc/emxx_udc.c pr_err(" *** %s, bad param\n", __func__); pr_err 2432 drivers/staging/emxx_udc/emxx_udc.c pr_err(" *** %s, ep == NULL !!\n", __func__); pr_err 2439 drivers/staging/emxx_udc/emxx_udc.c pr_err(" *** %s, bat bmAttributes\n", __func__); pr_err 2483 drivers/staging/emxx_udc/emxx_udc.c pr_err(" *** %s, bad param\n", __func__); pr_err 2489 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc: *** %s, ep == NULL !!\n", __func__); pr_err 2549 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc: %s --- _ep == NULL\n", __func__); pr_err 2552 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc: %s --- _req == NULL\n", __func__); pr_err 2562 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc: %s --- !_req->complete\n", __func__); pr_err 2565 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc:%s --- !_req->buf\n", __func__); pr_err 2568 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s --- !list_empty(&req->queue)\n", __func__); pr_err 2690 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s, bad param\n", __func__); pr_err 2738 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s, bad param\n", __func__); pr_err 2780 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc: %s, bad param\n", __func__); pr_err 2829 drivers/staging/emxx_udc/emxx_udc.c pr_err("udc: %s, bad param\n", __func__); pr_err 2850 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s, bad param\n", __func__); pr_err 2884 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s, bad param\n", __func__); pr_err 2910 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s, bad param\n", __func__); pr_err 2930 drivers/staging/emxx_udc/emxx_udc.c pr_err("%s, bad param\n", __func__); pr_err 131 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] Filesystem has been set read-only\n"); pr_err 357 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] free_cluster : skip free-req clu:%u, because of zero-size truncation\n", pr_err 3608 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] %s: out of range error! (sec = %llu)\n", pr_err 3631 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] %s: out of range error! (sec = %llu)\n", pr_err 3638 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] %s: bh is NULL!\n", __func__); pr_err 3660 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] %s: out of range error! (sec = %llu, num_secs = %d)\n", pr_err 3683 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] %s: out of range error! (sec = %llu, num_secs = %d)\n", pr_err 3689 drivers/staging/exfat/exfat_core.c pr_err("[EXFAT] %s: bh is NULL!\n", __func__); pr_err 1093 drivers/staging/exfat/exfat_super.c pr_err("[EXFAT] truncate : can't skip it because of size-mismatch(old:%lld->fid:%lld).\n", pr_err 3763 drivers/staging/exfat/exfat_super.c pr_err("[EXFAT] Unrecognized mount option %s or missing value\n", pr_err 3872 drivers/staging/exfat/exfat_super.c pr_err("[EXFAT] ffsMountVol failed\n"); pr_err 3894 drivers/staging/exfat/exfat_super.c pr_err("[EXFAT] Codepage %s not found\n", buf); pr_err 3916 drivers/staging/exfat/exfat_super.c pr_err("[EXFAT] Getting the root inode failed\n"); pr_err 1445 drivers/staging/fieldbus/anybuss/host.c pr_err("could not register Anybus-S bus: %d\n", ret); pr_err 285 drivers/staging/fieldbus/dev_core.c pr_err("fieldbus_dev%d unable to add device %d:%d\n", pr_err 322 drivers/staging/fieldbus/dev_core.c pr_err("fieldbus_dev: could not register class\n"); pr_err 328 drivers/staging/fieldbus/dev_core.c pr_err("fieldbus_dev: unable to allocate char dev region\n"); pr_err 2774 drivers/staging/fwserial/fwserial.c pr_err("register tty driver failed (%d)\n", err); pr_err 2799 drivers/staging/fwserial/fwserial.c pr_err("register loop driver failed (%d)\n", err); pr_err 2825 drivers/staging/fwserial/fwserial.c pr_err("add management handler failed (%d)\n", err); pr_err 2833 drivers/staging/fwserial/fwserial.c pr_err("add unit descriptor failed (%d)\n", err); pr_err 2839 drivers/staging/fwserial/fwserial.c pr_err("register fwserial driver failed (%d)\n", err); pr_err 158 drivers/staging/gasket/gasket_core.c pr_err("Duplicate device %s\n", kobj_name); pr_err 171 drivers/staging/gasket/gasket_core.c pr_err("Too many registered devices; max %d\n", GASKET_DEV_MAX); pr_err 206 drivers/staging/gasket/gasket_core.c pr_err("no memory for device, parent %s\n", parent_name); pr_err 1705 drivers/staging/gasket/gasket_core.c pr_err("%s driver already loaded/registered\n", pr_err 1723 drivers/staging/gasket/gasket_core.c pr_err("too many drivers loaded, max %d\n", pr_err 1735 drivers/staging/gasket/gasket_core.c pr_err("Cannot register %s class [ret=%ld]\n", pr_err 1745 drivers/staging/gasket/gasket_core.c pr_err("cannot register %s char driver [ret=%d]\n", pr_err 1780 drivers/staging/gasket/gasket_core.c pr_err("request to unregister unknown desc: %s, %d:%d\n", pr_err 169 drivers/staging/gasket/gasket_interrupt.c pr_err("Received unknown irq %d\n", irq); pr_err 538 drivers/staging/gdm724x/gdm_lte.c pr_err("event init failed\n"); pr_err 698 drivers/staging/gdm724x/gdm_lte.c pr_err("rx sdu wrong hci %04x\n", cmd_evt); pr_err 702 drivers/staging/gdm724x/gdm_lte.c pr_err("rx sdu invalid len %d\n", hci_len); pr_err 708 drivers/staging/gdm724x/gdm_lte.c pr_err("rx sdu invalid nic_type :%x\n", nic_type); pr_err 850 drivers/staging/gdm724x/gdm_lte.c pr_err("MAC invalid, restoring default\n"); pr_err 161 drivers/staging/gdm724x/gdm_mux.c pr_err("invalid START_FLAG %x\n", start_flag); pr_err 168 drivers/staging/gdm724x/gdm_mux.c pr_err("invalid payload : %d %d %04x\n", pr_err 175 drivers/staging/gdm724x/gdm_mux.c pr_err("invalid index %d\n", index); pr_err 227 drivers/staging/gdm724x/gdm_mux.c pr_err("failed to send mux data to host\n"); pr_err 282 drivers/staging/gdm724x/gdm_mux.c pr_err("device is disconnected\n"); pr_err 288 drivers/staging/gdm724x/gdm_mux.c pr_err("get_rx_struct fail\n"); pr_err 318 drivers/staging/gdm724x/gdm_mux.c pr_err("usb_submit_urb ret=%d\n", ret); pr_err 366 drivers/staging/gdm724x/gdm_mux.c pr_err("alloc_mux_tx fail\n"); pr_err 398 drivers/staging/gdm724x/gdm_mux.c pr_err("usb_submit_urb Error: %d\n", ret); pr_err 424 drivers/staging/gdm724x/gdm_mux.c pr_err("usb_control_msg error: %d\n", ret); pr_err 367 drivers/staging/gdm724x/gdm_usb.c pr_err("register lte device failed\n"); pr_err 423 drivers/staging/gdm724x/gdm_usb.c pr_err("failed to send received data\n"); pr_err 494 drivers/staging/gdm724x/gdm_usb.c pr_err("invalid device\n"); pr_err 500 drivers/staging/gdm724x/gdm_usb.c pr_err("Out of Memory\n"); pr_err 532 drivers/staging/gdm724x/gdm_usb.c pr_err("usb_submit_urb failed (%p)\n", r); pr_err 693 drivers/staging/gdm724x/gdm_usb.c pr_err("send_tx_packet failed\n"); pr_err 714 drivers/staging/gdm724x/gdm_usb.c pr_err("sdu send - invalid device\n"); pr_err 723 drivers/staging/gdm724x/gdm_usb.c pr_err("sdu send - free list empty\n"); pr_err 767 drivers/staging/gdm724x/gdm_usb.c pr_err("hci send - invalid device\n"); pr_err 773 drivers/staging/gdm724x/gdm_usb.c pr_err("hci_send - out of memory\n"); pr_err 989 drivers/staging/gdm724x/gdm_usb.c pr_err("error creating event\n"); pr_err 38 drivers/staging/gdm724x/netlink_k.c pr_err("nl cb - unregistered\n"); pr_err 43 drivers/staging/gdm724x/netlink_k.c pr_err("nl cb - invalid skb length\n"); pr_err 50 drivers/staging/gdm724x/netlink_k.c pr_err("nl cb - invalid length (%d,%d)\n", pr_err 64 drivers/staging/gdm724x/netlink_k.c pr_err("nl cb - dev (%d) not found\n", ifindex); pr_err 121 drivers/staging/gdm724x/netlink_k.c pr_err("nl broadcast g=%d, t=%d, l=%d, r=%d\n", pr_err 216 drivers/staging/greybus/audio_manager_module.c pr_err("failed initializing kobject for audio module #%d\n", pr_err 274 drivers/staging/greybus/fw-core.c pr_err("Failed to initialize fw-mgmt core (%d)\n", ret); pr_err 280 drivers/staging/greybus/fw-core.c pr_err("Failed to initialize component authentication core (%d)\n", pr_err 332 drivers/staging/greybus/gbphy.c pr_err("gbphy bus register failed (%d)\n", retval); pr_err 338 drivers/staging/greybus/gbphy.c pr_err("error registering greybus driver\n"); pr_err 977 drivers/staging/greybus/uart.c pr_err("Can not allocate tty driver\n"); pr_err 996 drivers/staging/greybus/uart.c pr_err("Can not register tty driver: %d\n", retval); pr_err 54 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("error: readinfo buffer too small\n"); pr_err 76 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("error: length section is not 'e', but %c\n", tbuf[0]); pr_err 99 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("error: corrupted header\n"); pr_err 176 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("unsupported fpga image format\n"); pr_err 193 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("firmware %s is missing, cannot continue.\n", fw_file); pr_err 214 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("unsupported program bus width %d\n", pr_err 242 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("init_b 0\n"); pr_err 248 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("init_B %d\n", xl_get_init_b()); pr_err 254 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("fpga download fail\n"); pr_err 306 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("gs_load_image error\n"); pr_err 312 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("gs_read_image error\n"); pr_err 318 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("gs_set_download_method error\n"); pr_err 324 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("gs_download_image error\n"); pr_err 330 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("gs_release_image error\n"); pr_err 340 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("gs_release_image error\n"); pr_err 357 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("FPGA DRIVER INIT FAIL!!\n"); pr_err 363 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("GPIO INIT FAIL!!\n"); pr_err 369 drivers/staging/gs_fpgaboot/gs_fpgaboot.c pr_err("FPGA DOWNLOAD FAIL!!\n"); pr_err 42 drivers/staging/gs_fpgaboot/io.c pr_err("unsupported program bus width %d\n", bus_bytes); pr_err 2127 drivers/staging/isdn/gigaset/bas-gigaset.c pr_err("out of memory\n"); pr_err 2142 drivers/staging/isdn/gigaset/bas-gigaset.c pr_err("out of memory\n"); pr_err 2205 drivers/staging/isdn/gigaset/bas-gigaset.c pr_err("out of memory\n"); pr_err 2211 drivers/staging/isdn/gigaset/bas-gigaset.c pr_err("out of memory\n"); pr_err 2599 drivers/staging/isdn/gigaset/bas-gigaset.c pr_err("error %d registering USB driver\n", -result); pr_err 2451 drivers/staging/isdn/gigaset/capi.c pr_err("%s: out of memory\n", __func__); pr_err 2474 drivers/staging/isdn/gigaset/capi.c pr_err("attach_capi_ctr failed (%d)\n", rc); pr_err 677 drivers/staging/isdn/gigaset/common.c pr_err("maximum number of devices exceeded\n"); pr_err 713 drivers/staging/isdn/gigaset/common.c pr_err("out of memory\n"); pr_err 738 drivers/staging/isdn/gigaset/common.c pr_err("error registering ISDN device\n"); pr_err 760 drivers/staging/isdn/gigaset/common.c pr_err("could not allocate channel %d data\n", i); pr_err 854 drivers/staging/isdn/gigaset/common.c pr_err("could not allocate channel %d data\n", i); pr_err 103 drivers/staging/isdn/gigaset/interface.c pr_err("%s: not connected\n", __func__); pr_err 591 drivers/staging/isdn/gigaset/interface.c pr_err("error %d registering tty driver\n", ret); pr_err 599 drivers/staging/isdn/gigaset/interface.c pr_err("out of memory\n"); pr_err 149 drivers/staging/isdn/gigaset/isocdata.c pr_err("invalid size %d\n", size); pr_err 76 drivers/staging/isdn/gigaset/proc.c pr_err("could not create sysfs attribute\n"); pr_err 387 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("out of memory\n"); pr_err 397 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("error %d registering platform device\n", rc); pr_err 501 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("%s: no driver structure\n", __func__); pr_err 569 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("%s: no hw cardstate\n", __func__); pr_err 747 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("error %d registering platform driver\n", rc); pr_err 762 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("error %d registering line discipline\n", rc); pr_err 790 drivers/staging/isdn/gigaset/ser-gigaset.c pr_err("error %d unregistering line discipline\n", rc); pr_err 382 drivers/staging/isdn/gigaset/usb-gigaset.c pr_err("%s: disconnected\n", __func__); pr_err 415 drivers/staging/isdn/gigaset/usb-gigaset.c pr_err("%s: disconnected\n", __func__); pr_err 576 drivers/staging/isdn/gigaset/usb-gigaset.c pr_err("out of memory\n"); pr_err 912 drivers/staging/isdn/gigaset/usb-gigaset.c pr_err("error %d registering USB driver\n", -result); pr_err 210 drivers/staging/kpc2000/kpc_dma/kpc_dma_driver.c pr_err("Can't allocate a major number (%d) for kpc_dma (err = %d)\n", KPC_DMA_CHAR_MAJOR, err); pr_err 218 drivers/staging/kpc2000/kpc_dma/kpc_dma_driver.c pr_err("Can't create class kpc_dma (err = %d)\n", err); pr_err 224 drivers/staging/kpc2000/kpc_dma/kpc_dma_driver.c pr_err("Can't register platform driver for kpc_dma (err = %d)\n", err); pr_err 316 drivers/staging/media/hantro/hantro.h pr_err("%s:%d: " fmt, __func__, __LINE__, ##args) pr_err 101 drivers/staging/most/configfs.c pr_err("Config failed\n"); pr_err 376 drivers/staging/most/configfs.c pr_err("Removing link failed.\n"); pr_err 608 drivers/staging/most/configfs.c pr_err("Error %d while registering subsystem %s\n", pr_err 884 drivers/staging/most/core.c pr_err("hdm enqueue failed\n"); pr_err 1251 drivers/staging/most/core.c pr_err("Bad interface or index out of range\n"); pr_err 1271 drivers/staging/most/core.c pr_err("Cannot stop channel %d of mdev %s\n", c->channel_id, pr_err 1307 drivers/staging/most/core.c pr_err("Bad component\n"); pr_err 1341 drivers/staging/most/core.c pr_err("Bad component\n"); pr_err 1377 drivers/staging/most/core.c pr_err("Bad interface or channel overflow\n"); pr_err 1402 drivers/staging/most/core.c pr_err("registering iface->dev failed\n"); pr_err 1445 drivers/staging/most/core.c pr_err("registering c->dev failed\n"); pr_err 139 drivers/staging/most/dim2/dim2.c pr_err("%s: error_id - %d, error_message - %s\n", __func__, error_id, pr_err 467 drivers/staging/most/dim2/dim2.c pr_err("%s: too small buffer size\n", hdm_ch->name); pr_err 481 drivers/staging/most/dim2/dim2.c pr_err("%s: too small buffer size\n", hdm_ch->name); pr_err 495 drivers/staging/most/dim2/dim2.c pr_err("%s: invalid sub-buffer size or too small buffer size\n", pr_err 509 drivers/staging/most/dim2/dim2.c pr_err("%s: invalid sub-buffer size or too small buffer size\n", pr_err 521 drivers/staging/most/dim2/dim2.c pr_err("%s: configure failed, bad channel type: %d\n", pr_err 528 drivers/staging/most/dim2/dim2.c pr_err("%s: configure failed (%d), type: %d, is_tx: %d\n", pr_err 602 drivers/staging/most/dim2/dim2.c pr_err("Async Tx Not initialized\n"); pr_err 653 drivers/staging/most/dim2/dim2.c pr_err("HAL Failed to close channel %s\n", hdm_ch->name); pr_err 75 drivers/staging/most/i2c/i2c.c pr_err("bad data type for channel %d\n", ch_idx); pr_err 80 drivers/staging/most/i2c/i2c.c pr_err("bad direction for channel %d\n", ch_idx); pr_err 87 drivers/staging/most/i2c/i2c.c pr_err("bad irq: %d\n", dev->client->irq); pr_err 94 drivers/staging/most/i2c/i2c.c pr_err("request_irq(%d) failed: %d\n", pr_err 201 drivers/staging/most/i2c/i2c.c pr_err("Failed to receive PML\n"); pr_err 214 drivers/staging/most/i2c/i2c.c pr_err("Failed to receive a Port Message\n"); pr_err 328 drivers/staging/most/i2c/i2c.c pr_err("Failed to register i2c as a MOST interface\n"); pr_err 85 drivers/staging/most/net/net.c pr_err("drop: too large packet! (%u)\n", skb->len); pr_err 90 drivers/staging/most/net/net.c pr_err("drop: too small buffer! (%d for %d)\n", pr_err 96 drivers/staging/most/net/net.c pr_err("drop: too small packet! (%d)\n", skb->len); pr_err 137 drivers/staging/most/net/net.c pr_err("drop: too large packet! (%u)\n", skb->len); pr_err 142 drivers/staging/most/net/net.c pr_err("drop: too small buffer! (%d for %d)\n", pr_err 343 drivers/staging/most/net/net.c pr_err("direction is allocated\n"); pr_err 349 drivers/staging/most/net/net.c pr_err("register_netdev() failed\n"); pr_err 288 drivers/staging/most/sound/sound.c pr_err("Couldn't start thread\n"); pr_err 294 drivers/staging/most/sound/sound.c pr_err("most_start_channel() failed!\n"); pr_err 344 drivers/staging/most/sound/sound.c pr_err("Requested number of channels not supported.\n"); pr_err 404 drivers/staging/most/sound/sound.c pr_err("unsupported format\n"); pr_err 493 drivers/staging/most/sound/sound.c pr_err("Bad PCM format\n"); pr_err 518 drivers/staging/most/sound/sound.c pr_err("Unsupported PCM format\n"); pr_err 523 drivers/staging/most/sound/sound.c pr_err("Bad number of channels\n"); pr_err 528 drivers/staging/most/sound/sound.c pr_err("Audio resolution doesn't fit subbuffer size\n"); pr_err 592 drivers/staging/most/sound/sound.c pr_err("Incompatible channel type\n"); pr_err 628 drivers/staging/most/sound/sound.c pr_err("channel (%s:%d) is already linked\n", pr_err 711 drivers/staging/most/sound/sound.c pr_err("sound_disconnect_channel(), invalid channel %d\n", pr_err 739 drivers/staging/most/sound/sound.c pr_err("sound_rx_completion(), invalid channel %d\n", pr_err 771 drivers/staging/most/sound/sound.c pr_err("sound_tx_completion(), invalid channel %d\n", pr_err 803 drivers/staging/most/sound/sound.c pr_err("Failed to register %s\n", comp.name); pr_err 806 drivers/staging/most/sound/sound.c pr_err("Failed to register %s configfs subsys\n", comp.name); pr_err 459 drivers/staging/most/video/video.c pr_err("channel already linked\n"); pr_err 464 drivers/staging/most/video/video.c pr_err("wrong direction, expect rx\n"); pr_err 470 drivers/staging/most/video/video.c pr_err("wrong channel type, expect sync or isoc\n"); pr_err 490 drivers/staging/most/video/video.c pr_err("v4l2_device_register() failed\n"); pr_err 516 drivers/staging/most/video/video.c pr_err("no such channel is linked\n"); pr_err 206 drivers/staging/netlogic/xlr_net.c pr_err("Autoneg failed\n"); pr_err 788 drivers/staging/netlogic/xlr_net.c pr_err("no PHY found on phy_addr %d\n", priv->phy_addr); pr_err 797 drivers/staging/netlogic/xlr_net.c pr_err("could not attach PHY\n"); pr_err 820 drivers/staging/netlogic/xlr_net.c pr_err("mdiobus alloc failed\n"); pr_err 841 drivers/staging/netlogic/xlr_net.c pr_err("mdio bus registration failed\n"); pr_err 23 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 interface down\n", index); pr_err 25 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 Calendar table parity error\n", index); pr_err 27 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n", pr_err 30 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 DIP4 error\n", index); pr_err 32 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Selected port has hit TPA overflow\n", pr_err 35 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 reserved control word detected\n", pr_err 38 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 receive FIFO drowning/overflow\n", pr_err 41 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 packet closed on non-16B alignment without EOP\n", pr_err 44 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Spi4 async FIFO overflow\n", index); pr_err 46 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Abnormal packet termination (ERR bit)\n", pr_err 49 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: SRX Port out of range\n", index); pr_err 55 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX Interface encountered a fatal error\n", pr_err 58 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX FRMCNT has exceeded STX_DIP_CNT[MAXFRM]\n", pr_err 61 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX Unexpected framing sequence\n", index); pr_err 63 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX ERRCNT has exceeded STX_DIP_CNT[MAXDIP]\n", pr_err 66 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX DIP2 error on the Spi4 Status channel\n", pr_err 69 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX Spi4 FIFO overflow error\n", index); pr_err 71 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX Transmit packet burst too big\n", index); pr_err 73 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX Calendar Table Parity Error Bank%d\n", pr_err 76 drivers/staging/octeon/ethernet-spi.c pr_err("SPI%d: STX Calendar Table Parity Error Bank%d\n", pr_err 696 drivers/staging/octeon/ethernet.c pr_err("Error: No 'pip' in /aliases\n"); pr_err 794 drivers/staging/octeon/ethernet.c pr_err("Failed to register ethernet device for POW\n"); pr_err 803 drivers/staging/octeon/ethernet.c pr_err("Failed to allocate ethernet device for POW\n"); pr_err 823 drivers/staging/octeon/ethernet.c pr_err("Failed to allocate ethernet device for port %d\n", pr_err 900 drivers/staging/octeon/ethernet.c pr_err("Failed to register ethernet device for interface %d, port %d\n", pr_err 65 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("DCON ID not 0xDCxx: 0x%04x instead.\n", ver); pr_err 74 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("Unable to init.\n"); pr_err 140 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n"); pr_err 290 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("couldn't enable scanline interrupt!\n"); pr_err 296 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("Timeout entering CPU mode; expect a screen glitch.\n"); pr_err 300 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("couldn't disable scanline interrupt!\n"); pr_err 311 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("Failed to enter CPU mode\n"); pr_err 335 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("Timeout entering DCON mode; expect a screen glitch.\n"); pr_err 351 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("missed loading, retrying\n"); pr_err 620 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("Unable to create the DCON device\n"); pr_err 628 drivers/staging/olpc_dcon/olpc_dcon.c pr_err("Unable to add the DCON device\n"); pr_err 50 drivers/staging/olpc_dcon/olpc_dcon_xo_1.c pr_err("failed to request %s GPIO: %d\n", pin[i].name, pr_err 97 drivers/staging/olpc_dcon/olpc_dcon_xo_1.c pr_err("failed to request DCON's irq\n"); pr_err 103 drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c pr_err("failed to request %s GPIO: %d\n", pin[i].name, pr_err 123 drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c pr_err("DCON (IRQ%d) allocation failed\n", irq); pr_err 546 drivers/staging/pi433/pi433_if.c pr_err("rf69_set_mode(): radio module failed to go standby\n"); pr_err 1218 drivers/staging/pi433/pi433_if.c pr_err("pi433: device register failed\n"); pr_err 655 drivers/staging/qlge/qlge_dbg.c pr_err("Bad type!!! 0x%08x\n", type); pr_err 1340 drivers/staging/qlge/qlge_dbg.c pr_err("%.08x: %.08x %.08x %.08x %.08x %.08x " pr_err 1362 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Interrupt %d is %s\n", pr_err 1372 drivers/staging/qlge/qlge_dbg.c pr_err("%s: %s = 0x%.08x\n", qdev->ndev->name, #reg, data); \ pr_err 1378 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Couldn't get xgmac sem\n", __func__); pr_err 1415 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Failed read of mac index register\n", pr_err 1420 drivers/staging/qlge/qlge_dbg.c pr_err("%s: CAM index %d CAM Lookup Lower = 0x%.08x:%.08x, Output = 0x%.08x\n", pr_err 1428 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Failed read of mac index register\n", pr_err 1433 drivers/staging/qlge/qlge_dbg.c pr_err("%s: MCAST index %d CAM Lookup Lower = 0x%.08x:%.08x\n", pr_err 1450 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Failed read of routing index register\n", pr_err 1455 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Routing Mask %d = 0x%.08x\n", pr_err 1463 drivers/staging/qlge/qlge_dbg.c pr_err("%-32s= 0x%x\n", #reg, ql_read32(qdev, reg)) pr_err 1467 drivers/staging/qlge/qlge_dbg.c pr_err("reg dump for function #%d\n", qdev->func); pr_err 1532 drivers/staging/qlge/qlge_dbg.c pr_err("%s = %ld\n", #stat, (unsigned long)qdev->nic_stats.stat) pr_err 1536 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Enter\n", __func__); pr_err 1585 drivers/staging/qlge/qlge_dbg.c pr_err("qdev->%-24s = " type "\n", #field, qdev->field) pr_err 1587 drivers/staging/qlge/qlge_dbg.c pr_err("qdev->%-24s = %llx\n", #field, (unsigned long long)qdev->field) pr_err 1589 drivers/staging/qlge/qlge_dbg.c pr_err("%s[%d].%s = " type "\n", \ pr_err 1639 drivers/staging/qlge/qlge_dbg.c pr_err("Dumping wqicb stuff...\n"); pr_err 1640 drivers/staging/qlge/qlge_dbg.c pr_err("wqicb->len = 0x%x\n", le16_to_cpu(wqicb->len)); pr_err 1641 drivers/staging/qlge/qlge_dbg.c pr_err("wqicb->flags = %x\n", le16_to_cpu(wqicb->flags)); pr_err 1642 drivers/staging/qlge/qlge_dbg.c pr_err("wqicb->cq_id_rss = %d\n", pr_err 1644 drivers/staging/qlge/qlge_dbg.c pr_err("wqicb->rid = 0x%x\n", le16_to_cpu(wqicb->rid)); pr_err 1645 drivers/staging/qlge/qlge_dbg.c pr_err("wqicb->wq_addr = 0x%llx\n", pr_err 1647 drivers/staging/qlge/qlge_dbg.c pr_err("wqicb->wq_cnsmr_idx_addr = 0x%llx\n", pr_err 1655 drivers/staging/qlge/qlge_dbg.c pr_err("===================== Dumping tx_ring %d ===============\n", pr_err 1657 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->base = %p\n", tx_ring->wq_base); pr_err 1658 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->base_dma = 0x%llx\n", pr_err 1660 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->cnsmr_idx_sh_reg, addr = 0x%p, value = %d\n", pr_err 1664 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->size = %d\n", tx_ring->wq_size); pr_err 1665 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->len = %d\n", tx_ring->wq_len); pr_err 1666 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->prod_idx_db_reg = %p\n", tx_ring->prod_idx_db_reg); pr_err 1667 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->valid_db_reg = %p\n", tx_ring->valid_db_reg); pr_err 1668 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->prod_idx = %d\n", tx_ring->prod_idx); pr_err 1669 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->cq_id = %d\n", tx_ring->cq_id); pr_err 1670 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->wq_id = %d\n", tx_ring->wq_id); pr_err 1671 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->q = %p\n", tx_ring->q); pr_err 1672 drivers/staging/qlge/qlge_dbg.c pr_err("tx_ring->tx_count = %d\n", atomic_read(&tx_ring->tx_count)); pr_err 1678 drivers/staging/qlge/qlge_dbg.c pr_err("===================== Dumping ricb ===============\n"); pr_err 1679 drivers/staging/qlge/qlge_dbg.c pr_err("Dumping ricb stuff...\n"); pr_err 1681 drivers/staging/qlge/qlge_dbg.c pr_err("ricb->base_cq = %d\n", ricb->base_cq & 0x1f); pr_err 1682 drivers/staging/qlge/qlge_dbg.c pr_err("ricb->flags = %s%s%s%s%s%s%s%s%s\n", pr_err 1692 drivers/staging/qlge/qlge_dbg.c pr_err("ricb->mask = 0x%.04x\n", le16_to_cpu(ricb->mask)); pr_err 1694 drivers/staging/qlge/qlge_dbg.c pr_err("ricb->hash_cq_id[%d] = 0x%.08x\n", i, pr_err 1697 drivers/staging/qlge/qlge_dbg.c pr_err("ricb->ipv6_hash_key[%d] = 0x%.08x\n", i, pr_err 1700 drivers/staging/qlge/qlge_dbg.c pr_err("ricb->ipv4_hash_key[%d] = 0x%.08x\n", i, pr_err 1706 drivers/staging/qlge/qlge_dbg.c pr_err("Dumping cqicb stuff...\n"); pr_err 1708 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->msix_vect = %d\n", cqicb->msix_vect); pr_err 1709 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->flags = %x\n", cqicb->flags); pr_err 1710 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->len = %d\n", le16_to_cpu(cqicb->len)); pr_err 1711 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->addr = 0x%llx\n", pr_err 1713 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->prod_idx_addr = 0x%llx\n", pr_err 1715 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->pkt_delay = 0x%.04x\n", pr_err 1717 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->irq_delay = 0x%.04x\n", pr_err 1719 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->lbq_addr = 0x%llx\n", pr_err 1721 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->lbq_buf_size = 0x%.04x\n", pr_err 1723 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->lbq_len = 0x%.04x\n", pr_err 1725 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->sbq_addr = 0x%llx\n", pr_err 1727 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->sbq_buf_size = 0x%.04x\n", pr_err 1729 drivers/staging/qlge/qlge_dbg.c pr_err("cqicb->sbq_len = 0x%.04x\n", pr_err 1737 drivers/staging/qlge/qlge_dbg.c pr_err("===================== Dumping rx_ring %d ===============\n", pr_err 1739 drivers/staging/qlge/qlge_dbg.c pr_err("Dumping rx_ring %d, type = %s%s%s\n", pr_err 1743 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cqicb = %p\n", &rx_ring->cqicb); pr_err 1744 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cq_base = %p\n", rx_ring->cq_base); pr_err 1745 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cq_base_dma = %llx\n", pr_err 1747 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cq_size = %d\n", rx_ring->cq_size); pr_err 1748 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cq_len = %d\n", rx_ring->cq_len); pr_err 1749 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->prod_idx_sh_reg, addr = 0x%p, value = %d\n", pr_err 1753 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->prod_idx_sh_reg_dma = %llx\n", pr_err 1755 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cnsmr_idx_db_reg = %p\n", pr_err 1757 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cnsmr_idx = %d\n", rx_ring->cnsmr_idx); pr_err 1758 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->curr_entry = %p\n", rx_ring->curr_entry); pr_err 1759 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->valid_db_reg = %p\n", rx_ring->valid_db_reg); pr_err 1761 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_base = %p\n", rx_ring->lbq_base); pr_err 1762 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_base_dma = %llx\n", pr_err 1764 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_base_indirect = %p\n", pr_err 1766 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_base_indirect_dma = %llx\n", pr_err 1768 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq = %p\n", rx_ring->lbq); pr_err 1769 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_len = %d\n", rx_ring->lbq_len); pr_err 1770 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_size = %d\n", rx_ring->lbq_size); pr_err 1771 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_prod_idx_db_reg = %p\n", pr_err 1773 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_prod_idx = %d\n", rx_ring->lbq_prod_idx); pr_err 1774 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_curr_idx = %d\n", rx_ring->lbq_curr_idx); pr_err 1775 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_clean_idx = %d\n", rx_ring->lbq_clean_idx); pr_err 1776 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_free_cnt = %d\n", rx_ring->lbq_free_cnt); pr_err 1777 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->lbq_buf_size = %d\n", rx_ring->lbq_buf_size); pr_err 1779 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_base = %p\n", rx_ring->sbq_base); pr_err 1780 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_base_dma = %llx\n", pr_err 1782 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_base_indirect = %p\n", pr_err 1784 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_base_indirect_dma = %llx\n", pr_err 1786 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq = %p\n", rx_ring->sbq); pr_err 1787 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_len = %d\n", rx_ring->sbq_len); pr_err 1788 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_size = %d\n", rx_ring->sbq_size); pr_err 1789 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_prod_idx_db_reg addr = %p\n", pr_err 1791 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_prod_idx = %d\n", rx_ring->sbq_prod_idx); pr_err 1792 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_curr_idx = %d\n", rx_ring->sbq_curr_idx); pr_err 1793 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_clean_idx = %d\n", rx_ring->sbq_clean_idx); pr_err 1794 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_free_cnt = %d\n", rx_ring->sbq_free_cnt); pr_err 1795 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->sbq_buf_size = %d\n", rx_ring->sbq_buf_size); pr_err 1796 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cq_id = %d\n", rx_ring->cq_id); pr_err 1797 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->irq = %d\n", rx_ring->irq); pr_err 1798 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->cpu = %d\n", rx_ring->cpu); pr_err 1799 drivers/staging/qlge/qlge_dbg.c pr_err("rx_ring->qdev = %p\n", rx_ring->qdev); pr_err 1806 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Enter\n", __func__); pr_err 1813 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Failed to upload control block!\n", __func__); pr_err 1827 drivers/staging/qlge/qlge_dbg.c pr_err("%s: Invalid bit value = %x\n", __func__, bit); pr_err 1838 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->addr = 0x%llx\n", pr_err 1840 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->len = %d\n", pr_err 1842 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->flags = %s %s\n", pr_err 1846 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->addr = 0x%llx\n", pr_err 1848 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->len = %d\n", pr_err 1850 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->flags = %s %s\n", pr_err 1854 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->addr = 0x%llx\n", pr_err 1856 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->len = %d\n", pr_err 1858 drivers/staging/qlge/qlge_dbg.c pr_err("tbd->flags = %s %s\n", pr_err 1871 drivers/staging/qlge/qlge_dbg.c pr_err("%s\n", __func__); pr_err 1872 drivers/staging/qlge/qlge_dbg.c pr_err("opcode = %s\n", pr_err 1874 drivers/staging/qlge/qlge_dbg.c pr_err("flags1 = %s %s %s %s %s\n", pr_err 1880 drivers/staging/qlge/qlge_dbg.c pr_err("flags2 = %s %s %s\n", pr_err 1884 drivers/staging/qlge/qlge_dbg.c pr_err("flags3 = %s %s %s\n", pr_err 1888 drivers/staging/qlge/qlge_dbg.c pr_err("tid = %x\n", ob_mac_iocb->tid); pr_err 1889 drivers/staging/qlge/qlge_dbg.c pr_err("txq_idx = %d\n", ob_mac_iocb->txq_idx); pr_err 1890 drivers/staging/qlge/qlge_dbg.c pr_err("vlan_tci = %x\n", ob_mac_tso_iocb->vlan_tci); pr_err 1892 drivers/staging/qlge/qlge_dbg.c pr_err("frame_len = %d\n", pr_err 1894 drivers/staging/qlge/qlge_dbg.c pr_err("mss = %d\n", pr_err 1896 drivers/staging/qlge/qlge_dbg.c pr_err("prot_hdr_len = %d\n", pr_err 1898 drivers/staging/qlge/qlge_dbg.c pr_err("hdr_offset = 0x%.04x\n", pr_err 1902 drivers/staging/qlge/qlge_dbg.c pr_err("frame_len = %d\n", pr_err 1912 drivers/staging/qlge/qlge_dbg.c pr_err("%s\n", __func__); pr_err 1913 drivers/staging/qlge/qlge_dbg.c pr_err("opcode = %d\n", ob_mac_rsp->opcode); pr_err 1914 drivers/staging/qlge/qlge_dbg.c pr_err("flags = %s %s %s %s %s %s %s\n", pr_err 1922 drivers/staging/qlge/qlge_dbg.c pr_err("tid = %x\n", ob_mac_rsp->tid); pr_err 1929 drivers/staging/qlge/qlge_dbg.c pr_err("%s\n", __func__); pr_err 1930 drivers/staging/qlge/qlge_dbg.c pr_err("opcode = 0x%x\n", ib_mac_rsp->opcode); pr_err 1931 drivers/staging/qlge/qlge_dbg.c pr_err("flags1 = %s%s%s%s%s%s\n", pr_err 1940 drivers/staging/qlge/qlge_dbg.c pr_err("%s%s%s Multicast\n", pr_err 1948 drivers/staging/qlge/qlge_dbg.c pr_err("flags2 = %s%s%s%s%s\n", pr_err 1956 drivers/staging/qlge/qlge_dbg.c pr_err("%s%s%s%s%s error\n", pr_err 1968 drivers/staging/qlge/qlge_dbg.c pr_err("flags3 = %s%s\n", pr_err 1973 drivers/staging/qlge/qlge_dbg.c pr_err("RSS flags = %s%s%s%s\n", pr_err 1983 drivers/staging/qlge/qlge_dbg.c pr_err("data_len = %d\n", pr_err 1985 drivers/staging/qlge/qlge_dbg.c pr_err("data_addr = 0x%llx\n", pr_err 1988 drivers/staging/qlge/qlge_dbg.c pr_err("rss = %x\n", pr_err 1991 drivers/staging/qlge/qlge_dbg.c pr_err("vlan_id = %x\n", pr_err 1994 drivers/staging/qlge/qlge_dbg.c pr_err("flags4 = %s%s%s\n", pr_err 2000 drivers/staging/qlge/qlge_dbg.c pr_err("hdr length = %d\n", pr_err 2002 drivers/staging/qlge/qlge_dbg.c pr_err("hdr addr = 0x%llx\n", pr_err 100 drivers/staging/rtl8192e/rtllib_crypt_wep.c pr_err("Error!!! headroom=%d tailroom=%d skblen=%d hdr_len=%d\n", pr_err 82 drivers/staging/rtl8192e/rtllib_module.c pr_err("Unable to allocate net_device.\n"); pr_err 90 drivers/staging/rtl8192e/rtllib_module.c pr_err("Unable to allocate beacon storage: %d\n", err); pr_err 4881 drivers/staging/rtl8192u/r8192U_core.c pr_err("ieee80211_debug_init() failed %d\n", ret); pr_err 4887 drivers/staging/rtl8192u/r8192U_core.c pr_err("ieee80211_crypto_init() failed %d\n", ret); pr_err 4893 drivers/staging/rtl8192u/r8192U_core.c pr_err("ieee80211_crypto_tkip_init() failed %d\n", ret); pr_err 4899 drivers/staging/rtl8192u/r8192U_core.c pr_err("ieee80211_crypto_ccmp_init() failed %d\n", ret); pr_err 4905 drivers/staging/rtl8192u/r8192U_core.c pr_err("ieee80211_crypto_wep_init() failed %d\n", ret); pr_err 407 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c pr_err("Request firmware failed with error 0x%x\n", rtStatus); pr_err 413 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c pr_err("Firmware %s not available\n", fwfilepath); pr_err 498 drivers/staging/rtl8723bs/os_dep/os_intfs.c pr_err("dev_alloc_name, fail for %s\n", ifname); pr_err 372 drivers/staging/sm750fb/sm750.c pr_err("pixel bpp format not satisfied\n."); pr_err 560 drivers/staging/sm750fb/sm750.c pr_err("bpp %d not supported\n", var->bits_per_pixel); pr_err 573 drivers/staging/sm750fb/sm750.c pr_err("not enough video memory for mode\n"); pr_err 598 drivers/staging/sm750fb/sm750.c pr_err("regno = %d\n", regno); pr_err 918 drivers/staging/sm750fb/sm750.c pr_err("Could not allocate memory for cmap.\n"); pr_err 48 drivers/staging/sm750fb/sm750_hw.c pr_err("Can not request PCI regions.\n"); pr_err 56 drivers/staging/sm750fb/sm750_hw.c pr_err("mmio failed\n"); pr_err 84 drivers/staging/sm750fb/sm750_hw.c pr_err("Map video memory failed\n"); pr_err 310 drivers/staging/sm750fb/sm750_hw.c pr_err("Set mode timing failed\n"); pr_err 137 drivers/staging/speakup/serialio.c pr_err("Unable to request Speakup serial I R Q\n"); pr_err 28 drivers/staging/speakup/spk_ttyio.c pr_err("speakup: Invalid ser param. Must be between 0 and 191 inclusive.\n"); pr_err 184 drivers/staging/speakup/spk_ttyio.c pr_err("speakup: Failed to set N_SPEAKUP on tty\n"); pr_err 117 drivers/staging/unisys/visorhba/visorhba_main.c pr_err("visorbus failed to start thread\n"); pr_err 702 drivers/staging/unisys/visorhba/visorhba_main.c pr_err("visorhba: no completion context; cmd will time out\n"); pr_err 115 drivers/staging/uwb/driver.c pr_err("%s - registering bus driver failed\n", __func__); pr_err 1733 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c pr_err("Cleanup: Destroy video encoder\n"); pr_err 1739 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c pr_err("Cleanup: Destroy image encoder\n"); pr_err 1745 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c pr_err("Cleanup: Destroy video render\n"); pr_err 1750 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c pr_err("Cleanup: Destroy camera\n"); pr_err 1300 drivers/staging/vc04_services/bcm2835-camera/controls.c pr_err("error adding control %d/%d id 0x%x\n", c, pr_err 295 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("%s: ctx: %p, vchi_bulk_queue_receive failed %d\n", pr_err 309 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("bulk.buffer not configured - error in buffer_from_host\n"); pr_err 375 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("%s: msg_context not allocated, buf %p\n", __func__, pr_err 453 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("drvbuf.client_context(%u) is invalid\n", pr_err 458 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); pr_err 496 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("error %d on bulk submission\n", pr_err 505 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("message with invalid short payload\n"); pr_err 529 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); pr_err 549 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Message callback passed NULL instance\n"); pr_err 558 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Unable to dequeue a message (%d)\n", status); pr_err 584 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("received message context was null!\n"); pr_err 592 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("received invalid message context %u!\n", pr_err 634 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Received unhandled message reason %d\n", reason); pr_err 652 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("payload length %d exceeds max:%d\n", payload_len, pr_err 681 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("error %d queuing message\n", ret); pr_err 689 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("timed out waiting for sync completion\n"); pr_err 1252 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Incorrect reply type %d\n", rmsg->h.type); pr_err 1498 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("failed disabling src port(%d)\n", ret); pr_err 1511 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("failed disconnecting src port\n"); pr_err 1633 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("%s: failed to create component %d (Not enough GPU mem?)\n", pr_err 1797 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("mmal-vchiq: VCHIQ close failed\n"); pr_err 1841 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Failed to initialise VCHI instance (status=%d)\n", pr_err 1848 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Failed to connect VCHI instance (status=%d)\n", status); pr_err 1873 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c pr_err("Failed to open VCHI service connection (status=%d)\n", pr_err 3283 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c pr_err("Failed to create vchiq class\n"); pr_err 3289 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c pr_err("Failed to allocate vchiq's chrdev region\n"); pr_err 3295 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c pr_err("Failed to register vchiq driver\n"); pr_err 1738 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c pr_err("%s: p %x != ri %x\n", pr_err 2139 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c pr_err("%s: VCHIQ state already initialized\n", __func__); pr_err 738 drivers/staging/vme/devices/vme_user.c pr_err("No cards, skipping registration\n"); pr_err 747 drivers/staging/vme/devices/vme_user.c pr_err("Driver only able to handle %d buses\n", pr_err 1621 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c pr_err("Reached maximum number of interface\n"); pr_err 434 drivers/staging/wlan-ng/prism2fw.c pr_err("Failed to find chunk for crcrec[%d], addr=0x%06x len=%d , aborting crc.\n", pr_err 577 drivers/staging/wlan-ng/prism2fw.c pr_err("s3rec(a=0x%06x,l=%d), no chunk match, exiting.\n", pr_err 646 drivers/staging/wlan-ng/prism2fw.c pr_err("no end record found or invalid lengths in PDR data, exiting. %x %d\n", pr_err 718 drivers/staging/wlan-ng/prism2fw.c pr_err("error: Plug vs. PDR len mismatch for plugrec 0x%04x, abort plugging.\n", pr_err 735 drivers/staging/wlan-ng/prism2fw.c pr_err("error: Failed to find image chunk for plugrec 0x%04x.\n", pr_err 914 drivers/staging/wlan-ng/prism2fw.c pr_err("S3 plugrec limit reached - aborting\n"); pr_err 930 drivers/staging/wlan-ng/prism2fw.c pr_err("S3 crcrec limit reached - aborting\n"); pr_err 944 drivers/staging/wlan-ng/prism2fw.c pr_err("S3 inforec length too long - aborting\n"); pr_err 958 drivers/staging/wlan-ng/prism2fw.c pr_err("S3 inforec limit reached - aborting\n"); pr_err 968 drivers/staging/wlan-ng/prism2fw.c pr_err("S3 datarec limit reached - aborting\n"); pr_err 1107 drivers/staging/wlan-ng/prism2fw.c pr_err("%s()->xxxdl_write msg indicates failure, w/ resultcode=%d, aborting download.\n", pr_err 33 drivers/staging/wusbcore/security.c pr_err("WUSB-core: Cannot create wusbd_security workqueue\n"); pr_err 1393 drivers/staging/wusbcore/wa-xfer.c pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", pr_err 1404 drivers/staging/wusbcore/wa-xfer.c pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", pr_err 1416 drivers/staging/wusbcore/wa-xfer.c pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", pr_err 1651 drivers/staging/wusbcore/wa-xfer.c pr_err("%s: error_rpipe_get\n", __func__); pr_err 1659 drivers/staging/wusbcore/wa-xfer.c pr_err("%s: error usb dev gone\n", __func__); pr_err 43 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s: err:%u", func, ret); pr_err 161 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("Unable to find clip table entry. laddr %pI6. Error:%d.\n", pr_err 187 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("create server6 err %d stid %d laddr %pI6 lport %d\n", pr_err 223 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("create server failed err %d stid %d laddr %pI4 lport %d\n", pr_err 251 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("Bond devices are not supported. Interface:%s\n", pr_err 745 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s: csk %p; state %d\n", pr_err 1002 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s - device not up - dropping\n", __func__); pr_err 1033 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s - device not up - dropping\n", __func__); pr_err 1238 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s connect request on invalid stid %d\n", pr_err 1244 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s - listening parent not in CSK_STATE_LISTEN\n", pr_err 1251 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s csk not null tid %u\n", pr_err 1285 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s - failed to find dst entry!\n", pr_err 1299 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s - failed to allocate l2t entry!\n", pr_err 1620 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1723 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("%s: got neg advise %d on tid %u\n", pr_err 1801 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("csk 0x%p, tid %u, credit %u > %u\n", pr_err 1812 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("csk 0x%p, tid %u, credit %u + %u != %u.\n", pr_err 1837 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("csk 0x%p,%u, cr %u,%u+%u, empty.\n", pr_err 1895 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("can't find connection for tid %u.\n", tid); pr_err 1916 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("can't find conn. for tid %u.\n", tid); pr_err 1980 drivers/target/iscsi/cxgbit/cxgbit_cm.c pr_err("can't find conn. for tid %u.\n", tid); pr_err 380 drivers/target/iscsi/cxgbit/cxgbit_main.c pr_err("%s: csk NULL, op 0x%x.\n", __func__, op); pr_err 515 drivers/target/iscsi/cxgbit/cxgbit_main.c pr_err("No handler for opcode 0x%x.\n", op); pr_err 520 drivers/target/iscsi/cxgbit/cxgbit_main.c pr_err("%s OOM bailing out.\n", __func__); pr_err 620 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("param not found key %s\n", HEADERDIGEST); pr_err 630 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("param not found key %s\n", DATADIGEST); pr_err 658 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("param not found key %s\n", MAXBURSTLENGTH); pr_err 705 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("param not found key %s\n", DATASEQUENCEINORDER); pr_err 715 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("param not found key %s\n", DATAPDUINORDER); pr_err 751 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("param not found key %s\n", ERRORRECOVERYLEVEL); pr_err 861 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Unable to allocate iscsi_cmd + cxgbit_cmd\n"); pr_err 881 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("ImmediateData CRC32C DataDigest error\n"); pr_err 883 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Unable to recover from" pr_err 1056 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("ITT: 0x%08x, Offset: %u, Length: %u," pr_err 1104 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Unable to recover from" pr_err 1128 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Unable to allocate memory for" pr_err 1172 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Unable to recover from" pr_err 1191 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Unable to allocate text_in of payload_length: %u\n", pr_err 1275 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Got unknown iSCSI OpCode: 0x%02x\n", opcode); pr_err 1308 drivers/target/iscsi/cxgbit/cxgbit_target.c pr_err("Received illegal iSCSI Opcode: 0x%02x" pr_err 118 drivers/target/iscsi/iscsi_target.c pr_err("Target IQN exceeds %d bytes\n", pr_err 143 drivers/target/iscsi/iscsi_target.c pr_err("idr_alloc() failed for tiqn->tiqn_index\n"); pr_err 184 drivers/target/iscsi/iscsi_target.c pr_err("iscsit_set_tiqn_shutdown() failed\n"); pr_err 377 drivers/target/iscsi/iscsi_target.c pr_err("Unable to create kthread: iscsi_np\n"); pr_err 710 drivers/target/iscsi/iscsi_target.c pr_err("Unable to kmem_cache_create() for" pr_err 719 drivers/target/iscsi/iscsi_target.c pr_err("Unable to kmem_cache_create() for" pr_err 728 drivers/target/iscsi/iscsi_target.c pr_err("Unable to kmem_cache_create() for" pr_err 737 drivers/target/iscsi/iscsi_target.c pr_err("Unable to kmem_cache_create() for" pr_err 806 drivers/target/iscsi/iscsi_target.c pr_err("Unable to allocate memory for cmd->buf_ptr\n"); pr_err 832 drivers/target/iscsi/iscsi_target.c pr_err("cmd->conn is NULL for ITT: 0x%08x\n", pr_err 843 drivers/target/iscsi/iscsi_target.c pr_err("Unable to allocate memory for cmd->buf_ptr\n"); pr_err 899 drivers/target/iscsi/iscsi_target.c pr_err("Initial page entry out-of-bounds\n"); pr_err 931 drivers/target/iscsi/iscsi_target.c pr_err("offset %d + length %d overflow; %d/%d; sg-list:\n", pr_err 935 drivers/target/iscsi/iscsi_target.c pr_err("[%d] off %d len %d\n", pr_err 1012 drivers/target/iscsi/iscsi_target.c pr_err("ISCSI_FLAG_CMD_WRITE & ISCSI_FLAG_CMD_FINAL" pr_err 1040 drivers/target/iscsi/iscsi_target.c pr_err("ISCSI_FLAG_CMD_READ and/or ISCSI_FLAG_CMD_WRITE" pr_err 1049 drivers/target/iscsi/iscsi_target.c pr_err("Bidirectional operations not supported!\n"); pr_err 1055 drivers/target/iscsi/iscsi_target.c pr_err("Illegally set Immediate Bit in iSCSI Initiator" pr_err 1062 drivers/target/iscsi/iscsi_target.c pr_err("ImmediateData=No but DataSegmentLength=%u," pr_err 1070 drivers/target/iscsi/iscsi_target.c pr_err("Expected Data Transfer Length and Length of" pr_err 1078 drivers/target/iscsi/iscsi_target.c pr_err("DataSegmentLength: %u is greater than" pr_err 1086 drivers/target/iscsi/iscsi_target.c pr_err("DataSegmentLength: %u is greater than" pr_err 1094 drivers/target/iscsi/iscsi_target.c pr_err("DataSegmentLength: %u is greater than" pr_err 1450 drivers/target/iscsi/iscsi_target.c pr_err("Command ITT: 0x%08x received DataOUT after" pr_err 1457 drivers/target/iscsi/iscsi_target.c pr_err("Command ITT: 0x%08x received DataOUT for a" pr_err 1465 drivers/target/iscsi/iscsi_target.c pr_err("DataOut Offset: %u, Length %u greater than iSCSI Command EDTL %u, protocol error.\n", pr_err 1475 drivers/target/iscsi/iscsi_target.c pr_err("Received unexpected unsolicited data" pr_err 1623 drivers/target/iscsi/iscsi_target.c pr_err("ITT: 0x%08x, Offset: %u, Length: %u," pr_err 1706 drivers/target/iscsi/iscsi_target.c pr_err("NopOUT Flag's, Left Most Bit not set, protocol error.\n"); pr_err 1716 drivers/target/iscsi/iscsi_target.c pr_err("NOPOUT ITT is reserved, but Immediate Bit is" pr_err 1727 drivers/target/iscsi/iscsi_target.c pr_err("NOPOUT Ping Data DataSegmentLength: %u is" pr_err 1885 drivers/target/iscsi/iscsi_target.c pr_err("Ping data CRC32C DataDigest" pr_err 1889 drivers/target/iscsi/iscsi_target.c pr_err("Unable to recover from" pr_err 1977 drivers/target/iscsi/iscsi_target.c pr_err("RefTaskTag should be set to 0xFFFFFFFF.\n"); pr_err 1983 drivers/target/iscsi/iscsi_target.c pr_err("Task Management Request TASK_REASSIGN not" pr_err 2014 drivers/target/iscsi/iscsi_target.c pr_err("Unknown iSCSI TMR Function:" pr_err 2086 drivers/target/iscsi/iscsi_target.c pr_err("Unknown TMR function: 0x%02x, protocol" pr_err 2143 drivers/target/iscsi/iscsi_target.c pr_err("Unable to accept text parameter length: %u" pr_err 2152 drivers/target/iscsi/iscsi_target.c pr_err("Multi sequence text commands currently not supported\n"); pr_err 2186 drivers/target/iscsi/iscsi_target.c pr_err("Unable to locate text_in buffer for sendtargets" pr_err 2193 drivers/target/iscsi/iscsi_target.c pr_err("Received Text Data that is not" pr_err 2199 drivers/target/iscsi/iscsi_target.c pr_err("No \"=\" separator found in Text Data," pr_err 2209 drivers/target/iscsi/iscsi_target.c pr_err("Unable to locate valid SendTargets=%s value\n", text_ptr); pr_err 2289 drivers/target/iscsi/iscsi_target.c pr_err("Text data CRC32C DataDigest" pr_err 2293 drivers/target/iscsi/iscsi_target.c pr_err("Unable to recover from" pr_err 2413 drivers/target/iscsi/iscsi_target.c pr_err("Received Logout Request REMOVECONNFORRECOVERY" pr_err 2421 drivers/target/iscsi/iscsi_target.c pr_err("Received Logout Request REMOVECONNFORRECOVERY" pr_err 2461 drivers/target/iscsi/iscsi_target.c pr_err("Received logout request on connection that" pr_err 2530 drivers/target/iscsi/iscsi_target.c pr_err("Initiator sent SNACK request while in" pr_err 2556 drivers/target/iscsi/iscsi_target.c pr_err("R-Data SNACK Not Supported.\n"); pr_err 2560 drivers/target/iscsi/iscsi_target.c pr_err("Unknown SNACK type 0x%02x, protocol" pr_err 2649 drivers/target/iscsi/iscsi_target.c pr_err("ImmediateData CRC32C DataDigest 0x%08x" pr_err 2654 drivers/target/iscsi/iscsi_target.c pr_err("Unable to recover from" pr_err 2826 drivers/target/iscsi/iscsi_target.c pr_err("iscsit_get_datain_values failed for ITT: 0x%08x\n", pr_err 2834 drivers/target/iscsi/iscsi_target.c pr_err("Command ITT: 0x%08x, datain.offset: %u and" pr_err 2930 drivers/target/iscsi/iscsi_target.c pr_err("Unable to locate CID: %hu for" pr_err 2945 drivers/target/iscsi/iscsi_target.c pr_err("Unknown cmd->logout_reason: 0x%02x\n", pr_err 3353 drivers/target/iscsi/iscsi_target.c pr_err("Unable to locate '=' string in text_in:" pr_err 3628 drivers/target/iscsi/iscsi_target.c pr_err("Unknown Opcode: 0x%02x ITT:" pr_err 3729 drivers/target/iscsi/iscsi_target.c pr_err("Unknown Opcode: 0x%02x ITT:" pr_err 3755 drivers/target/iscsi/iscsi_target.c pr_err("Unknown Opcode: 0x%02x ITT:" pr_err 3911 drivers/target/iscsi/iscsi_target.c pr_err("Got unknown iSCSI OpCode: 0x%02x\n", hdr->opcode); pr_err 3913 drivers/target/iscsi/iscsi_target.c pr_err("Cannot recover from unknown" pr_err 3917 drivers/target/iscsi/iscsi_target.c pr_err("Unable to recover from unknown opcode while OFMarker=No," pr_err 3983 drivers/target/iscsi/iscsi_target.c pr_err("HeaderDigest CRC32C failed," pr_err 4006 drivers/target/iscsi/iscsi_target.c pr_err("Received illegal iSCSI Opcode: 0x%02x" pr_err 4352 drivers/target/iscsi/iscsi_target.c pr_err("%d connection(s) still exist for iSCSI session" pr_err 55 drivers/target/iscsi/iscsi_target_auth.c pr_err("Memory allocation failed for CHAP_A temporary buffer\n"); pr_err 65 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unable to locate CHAP_A key\n"); pr_err 102 drivers/target/iscsi/iscsi_target_auth.c pr_err("CHAP user or password not set for" pr_err 126 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unsupported CHAP_A value\n"); pr_err 181 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unable to allocate challenge buffer\n"); pr_err 187 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unable to allocate challenge_binhex buffer\n"); pr_err 195 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_N.\n"); pr_err 199 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_N.\n"); pr_err 206 drivers/target/iscsi/iscsi_target_auth.c pr_err("CHAP_N values do not match!\n"); pr_err 215 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_R.\n"); pr_err 219 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_R.\n"); pr_err 223 drivers/target/iscsi/iscsi_target_auth.c pr_err("Malformed CHAP_R\n"); pr_err 227 drivers/target/iscsi/iscsi_target_auth.c pr_err("Malformed CHAP_R\n"); pr_err 236 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unable to allocate struct crypto_shash\n"); pr_err 242 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unable to allocate struct shash_desc\n"); pr_err 250 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_init() failed\n"); pr_err 256 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_update() failed for id\n"); pr_err 263 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_update() failed for password\n"); pr_err 270 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_finup() failed for challenge\n"); pr_err 295 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_I.\n"); pr_err 305 drivers/target/iscsi/iscsi_target_auth.c pr_err("kstrtoul() failed for CHAP identifier: %d\n", ret); pr_err 309 drivers/target/iscsi/iscsi_target_auth.c pr_err("chap identifier: %lu greater than 255\n", id); pr_err 321 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_C.\n"); pr_err 326 drivers/target/iscsi/iscsi_target_auth.c pr_err("Could not find CHAP_C.\n"); pr_err 331 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unable to convert incoming challenge\n"); pr_err 335 drivers/target/iscsi/iscsi_target_auth.c pr_err("CHAP_C exceeds maximum binary size of 1024 bytes\n"); pr_err 339 drivers/target/iscsi/iscsi_target_auth.c pr_err("Malformed CHAP_C\n"); pr_err 349 drivers/target/iscsi/iscsi_target_auth.c pr_err("initiator CHAP_C matches target CHAP_C, failing" pr_err 358 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_init() failed\n"); pr_err 366 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_update() failed for id\n"); pr_err 373 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_update() failed for" pr_err 383 drivers/target/iscsi/iscsi_target_auth.c pr_err("crypto_shash_finup() failed for ma challenge\n"); pr_err 427 drivers/target/iscsi/iscsi_target_auth.c pr_err("Unknown CHAP digest type %d!\n", pr_err 70 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Illegal value for tpg_enable: %u\n", op); pr_err 75 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate struct iscsi_np from" pr_err 167 drivers/target/iscsi/iscsi_target_configfs.c pr_err("strlen(name): %d exceeds MAX_PORTAL_LEN: %d\n", pr_err 178 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate trailing \"]\"" pr_err 189 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate \":port\"" pr_err 199 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate \":port\"" pr_err 210 drivers/target/iscsi/iscsi_target_configfs.c pr_err("malformed ip/port passed: %s\n", name); pr_err 637 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Passed cmdsn_depth: %u exceeds" pr_err 644 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locatel acl_ci\n"); pr_err 649 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate tpg_ci\n"); pr_err 654 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate config_item wwn_ci\n"); pr_err 1037 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Illegal value for tpg_enable: %u\n", op); pr_err 1101 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Unable to locate \"tpgt_#\" directory" pr_err 1278 drivers/target/iscsi/iscsi_target_configfs.c pr_err("Illegal value for enforce_discovery_auth:" pr_err 1284 drivers/target/iscsi/iscsi_target_configfs.c pr_err("iscsit_global->discovery_tpg is NULL\n"); pr_err 26 drivers/target/iscsi/iscsi_target_datain_values.c pr_err("Unable to allocate memory for" pr_err 66 drivers/target/iscsi/iscsi_target_datain_values.c pr_err("cmd->datain_list is empty for ITT:" pr_err 105 drivers/target/iscsi/iscsi_target_datain_values.c pr_err("ITT: 0x%08x read_data_left is zero!\n", pr_err 204 drivers/target/iscsi/iscsi_target_datain_values.c pr_err("ITT: 0x%08x read_data_left is zero!\n", pr_err 325 drivers/target/iscsi/iscsi_target_datain_values.c pr_err("ITT: 0x%08x read_data_left is zero!\n", pr_err 425 drivers/target/iscsi/iscsi_target_datain_values.c pr_err("ITT: 0x%08x read_data_left is zero!\n", pr_err 126 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:" pr_err 143 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x with Offset: %u," pr_err 154 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Total %u bytes exceeds FirstBurstLength: %u" pr_err 177 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Unsolicited non-immediate data" pr_err 188 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x reached" pr_err 195 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x reached" pr_err 231 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x with Offset: %u," pr_err 263 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x, NextBurstLength: %u and" pr_err 289 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL" pr_err 296 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL" pr_err 306 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x reached" pr_err 314 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x reached" pr_err 322 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x reached" pr_err 360 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x" pr_err 365 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x" pr_err 375 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Unable to perform within-command recovery" pr_err 406 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x, received offset" pr_err 416 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x, received offset" pr_err 422 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x, received offset" pr_err 435 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Unable to perform within-command recovery" pr_err 469 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Command ITT: 0x%08x received already gotten" pr_err 732 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Unable to recover from DataOUT CRC" pr_err 756 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Exiting Time2Retain handler because" pr_err 763 drivers/target/iscsi/iscsi_target_erl0.c pr_err("Time2Retain timer expired for SID: %u, cleaning up" pr_err 61 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unable to allocate %u bytes for offload" pr_err 126 drivers/target/iscsi/iscsi_target_erl1.c pr_err("ITT: 0x%08x, R2T SNACK requesting" pr_err 137 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Command ITT: 0x%08x received R2T SNACK" pr_err 227 drivers/target/iscsi/iscsi_target_erl1.c pr_err("struct iscsi_cmd->seq_list is NULL!\n"); pr_err 251 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Ignoring non-sent sequence 0x%08x ->" pr_err 264 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Pre BegRun sequence 0x%08x ->" pr_err 278 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Found sequence begrun: 0x%08x in" pr_err 337 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Post BegRun sequence 0x%08x -> 0x%08x\n", pr_err 348 drivers/target/iscsi/iscsi_target_erl1.c pr_err("ITT: 0x%08x, Begrun: 0x%08x" pr_err 358 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unable to locate struct iscsi_seq for ITT: 0x%08x," pr_err 384 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Ignoring ITT: 0x%08x Data SNACK\n", pr_err 395 drivers/target/iscsi/iscsi_target_erl1.c pr_err("ITT: 0x%08x, Data SNACK requesting" pr_err 409 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Initiator requesting BegRun: 0x%08x, RunLength" pr_err 458 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unknown cmd->data_direction: 0x%02x\n", pr_err 481 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Got Status SNACK Begrun: 0x%08x, RunLength:" pr_err 503 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unable to find StatSN: 0x%08x for" pr_err 514 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Ignoring Status SNACK for BegRun:" pr_err 541 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Data ACK SNACK for TTT: 0x%08x is" pr_err 547 drivers/target/iscsi/iscsi_target_erl1.c pr_err("ITT: 0x%08x Data ACK SNACK BegRUN: 0x%08x is" pr_err 760 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unable to allocate memory for" pr_err 983 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unknown iSCSI Logout Request Code:" pr_err 991 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Cannot perform out of order execution for" pr_err 1072 drivers/target/iscsi/iscsi_target_erl1.c pr_err("cmd->cmd_r2t_list is empty!\n"); pr_err 1087 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unable to locate any incomplete DataOUT" pr_err 1118 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Unable to recover from DataOut timeout while" pr_err 1127 drivers/target/iscsi/iscsi_target_erl1.c pr_err("Command ITT: 0x%08x exceeded max retries" pr_err 206 drivers/target/iscsi/iscsi_target_erl2.c pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x" pr_err 321 drivers/target/iscsi/iscsi_target_erl2.c pr_err("Unable to allocate memory for" pr_err 43 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to allocate memory for struct iscsi_login.\n"); pr_err 52 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to allocate memory for response buffer.\n"); pr_err 58 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to allocate memory for request buffer.\n"); pr_err 88 drivers/target/iscsi/iscsi_target_login.c pr_err("crypto_alloc_ahash() failed\n"); pr_err 94 drivers/target/iscsi/iscsi_target_login.c pr_err("ahash_request_alloc() failed for conn_rx_hash\n"); pr_err 102 drivers/target/iscsi/iscsi_target_login.c pr_err("ahash_request_alloc() failed for conn_tx_hash\n"); pr_err 119 drivers/target/iscsi/iscsi_target_login.c pr_err("Unsupported iSCSI IETF Pre-RFC Revision," pr_err 266 drivers/target/iscsi/iscsi_target_login.c pr_err("Could not allocate memory for session\n"); pr_err 296 drivers/target/iscsi/iscsi_target_login.c pr_err("Session ID allocation failed %d\n", ret); pr_err 314 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to allocate memory for" pr_err 506 drivers/target/iscsi/iscsi_target_login.c pr_err("Initiator attempting to add a connection to" pr_err 565 drivers/target/iscsi/iscsi_target_login.c pr_err("Connection exists with CID %hu for %s," pr_err 603 drivers/target/iscsi/iscsi_target_login.c pr_err("Adding additional connection to this session" pr_err 637 drivers/target/iscsi/iscsi_target_login.c pr_err("bitmap_find_free_region() failed for" pr_err 645 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to start iscsi_target_tx_thread\n"); pr_err 654 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to start iscsi_target_rx_thread\n"); pr_err 805 drivers/target/iscsi/iscsi_target_login.c pr_err("iSCSI Login timeout on Network Portal %pISpc\n", pr_err 874 drivers/target/iscsi/iscsi_target_login.c pr_err("Unsupported network_transport: %d\n", pr_err 882 drivers/target/iscsi/iscsi_target_login.c pr_err("sock_create() failed.\n"); pr_err 906 drivers/target/iscsi/iscsi_target_login.c pr_err("kernel_setsockopt() for TCP_NODELAY" pr_err 916 drivers/target/iscsi/iscsi_target_login.c pr_err("kernel_setsockopt() for SO_REUSEADDR" pr_err 924 drivers/target/iscsi/iscsi_target_login.c pr_err("kernel_setsockopt() for IP_FREEBIND" pr_err 931 drivers/target/iscsi/iscsi_target_login.c pr_err("kernel_bind() failed: %d\n", ret); pr_err 937 drivers/target/iscsi/iscsi_target_login.c pr_err("kernel_listen() failed: %d\n", ret); pr_err 1097 drivers/target/iscsi/iscsi_target_login.c pr_err("try_module_get() failed for %s\n", t->name); pr_err 1111 drivers/target/iscsi/iscsi_target_login.c pr_err("Could not allocate memory for new connection\n"); pr_err 1146 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to allocate memory for struct iscsi_conn_ops.\n"); pr_err 1151 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to allocate conn->conn_cpumask\n"); pr_err 1180 drivers/target/iscsi/iscsi_target_login.c pr_err("iSCSI Login negotiation failed.\n"); pr_err 1327 drivers/target/iscsi/iscsi_target_login.c pr_err("iSCSI Network Portal on %pISpc currently not" pr_err 1390 drivers/target/iscsi/iscsi_target_login.c pr_err("Unable to locate struct iscsi_conn->tpg\n"); pr_err 88 drivers/target/iscsi/iscsi_target_nego.c pr_err("Length of input: %d exceeds max_length:" pr_err 118 drivers/target/iscsi/iscsi_target_nego.c pr_err("Unable to locate struct se_node_acl for" pr_err 125 drivers/target/iscsi/iscsi_target_nego.c pr_err("Unable to locate struct iscsi_node_acl for" pr_err 182 drivers/target/iscsi/iscsi_target_nego.c pr_err("Received unknown opcode 0x%02x.\n", pr_err 191 drivers/target/iscsi/iscsi_target_nego.c pr_err("Login request has both ISCSI_FLAG_LOGIN_CONTINUE" pr_err 202 drivers/target/iscsi/iscsi_target_nego.c pr_err("Initiator unexpectedly changed login stage" pr_err 213 drivers/target/iscsi/iscsi_target_nego.c pr_err("Illegal login_req->flags Combination, CSG: %d," pr_err 223 drivers/target/iscsi/iscsi_target_nego.c pr_err("Login request changed Version Max/Nin" pr_err 232 drivers/target/iscsi/iscsi_target_nego.c pr_err("Login request changed ISID unexpectedly," pr_err 240 drivers/target/iscsi/iscsi_target_nego.c pr_err("Login request changed ITT unexpectedly to" pr_err 248 drivers/target/iscsi/iscsi_target_nego.c pr_err("Login request payload exceeds default" pr_err 270 drivers/target/iscsi/iscsi_target_nego.c pr_err("SessionType key not received" pr_err 285 drivers/target/iscsi/iscsi_target_nego.c pr_err("InitiatorName key not received" pr_err 300 drivers/target/iscsi/iscsi_target_nego.c pr_err("Unable to locate" pr_err 310 drivers/target/iscsi/iscsi_target_nego.c pr_err("Incorrect" pr_err 785 drivers/target/iscsi/iscsi_target_nego.c pr_err("Security negotiation" pr_err 791 drivers/target/iscsi/iscsi_target_nego.c pr_err("Received unknown error %d from LIO" pr_err 830 drivers/target/iscsi/iscsi_target_nego.c pr_err("Initiator has already been" pr_err 840 drivers/target/iscsi/iscsi_target_nego.c pr_err("Initiator sent zero length security payload," pr_err 864 drivers/target/iscsi/iscsi_target_nego.c pr_err("Initiator sent AuthMethod=None but" pr_err 937 drivers/target/iscsi/iscsi_target_nego.c pr_err("Initiator is requesting CSG: 1, has not been" pr_err 965 drivers/target/iscsi/iscsi_target_nego.c pr_err("MAX_LOGIN_PDUS count reached.\n"); pr_err 1001 drivers/target/iscsi/iscsi_target_nego.c pr_err("Illegal CSG: %d received from" pr_err 1063 drivers/target/iscsi/iscsi_target_nego.c pr_err("Unable to allocate memory for tmpbuf.\n"); pr_err 1095 drivers/target/iscsi/iscsi_target_nego.c pr_err("InitiatorName key not received" pr_err 1113 drivers/target/iscsi/iscsi_target_nego.c pr_err("SessionType key not received" pr_err 1135 drivers/target/iscsi/iscsi_target_nego.c pr_err("iscsi_login_setup_crypto() failed\n"); pr_err 1155 drivers/target/iscsi/iscsi_target_nego.c pr_err("TargetName key not received" pr_err 1169 drivers/target/iscsi/iscsi_target_nego.c pr_err("Unable to locate Target IQN: %s in" pr_err 1183 drivers/target/iscsi/iscsi_target_nego.c pr_err("Unable to locate Target Portal Group" pr_err 1197 drivers/target/iscsi/iscsi_target_nego.c pr_err("iscsi_login_setup_crypto() failed\n"); pr_err 1239 drivers/target/iscsi/iscsi_target_nego.c pr_err("iSCSI Initiator Node: %s is not authorized to" pr_err 50 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested DataOut Timeout %u larger than" pr_err 55 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested DataOut Timeout %u smaller than" pr_err 75 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested DataOut Timeout Retries %u larger" pr_err 80 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested DataOut Timeout Retries %u smaller" pr_err 106 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested NopIn Timeout %u larger than maximum" pr_err 111 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested NopIn Timeout %u smaller than" pr_err 156 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested NopIn Response Timeout %u larger" pr_err 161 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested NopIn Response Timeout %u smaller" pr_err 182 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested Random DataIN PDU Offsets: %u not" pr_err 202 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested Random DataIN Sequence Offsets: %u" pr_err 222 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested Random R2T Offsets: %u not" pr_err 242 drivers/target/iscsi/iscsi_target_nodeattrib.c pr_err("Requested default ERL: %u not 0, 1, or 2\n", pr_err 31 drivers/target/iscsi/iscsi_target_parameters.c pr_err("rx_data returned %d, expecting %d.\n", pr_err 62 drivers/target/iscsi/iscsi_target_parameters.c pr_err("tx_data returned %d, expecting %d.\n", pr_err 126 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for parameter.\n"); pr_err 133 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for parameter name.\n"); pr_err 139 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for parameter value.\n"); pr_err 176 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unknown type_range 0x%02x\n", pr_err 201 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for" pr_err 572 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for struct iscsi_param_list.\n"); pr_err 588 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for struct iscsi_param.\n"); pr_err 598 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for parameter name/value.\n"); pr_err 616 drivers/target/iscsi/iscsi_target_parameters.c pr_err("No parameters allocated.\n"); pr_err 663 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key or parameter list pointer is NULL.\n"); pr_err 672 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to locate key \"%s\".\n", key); pr_err 681 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to locate \"=\" separator for key," pr_err 699 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for value.\n"); pr_err 716 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Value for notunderstood key \"%s\" exceeds %d," pr_err 723 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate memory for" pr_err 801 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be either" pr_err 818 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 826 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 834 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 842 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 850 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 858 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 866 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 885 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 894 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 902 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal value for \"%s\", must be" pr_err 964 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Received key \"%s\" twice, protocol error.\n", pr_err 1065 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Proposer's value list \"%s\" contains" pr_err 1084 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Received key \"%s\" twice, protocol error.\n", pr_err 1094 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Illegal \",\" in response for \"%s\".\n", pr_err 1124 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Received %s=%s\n", param->name, value); pr_err 1134 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Received illegal offer %s=%s\n", pr_err 1140 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Standard iSCSI key \"%s\" cannot be answered" pr_err 1150 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Detected value separator \",\", but" pr_err 1159 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Value for key \"%s\" exceeds %d," pr_err 1175 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Huh? 0x%02x\n", param->type); pr_err 1196 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Length of key name \"%s\" exceeds %d.\n", pr_err 1206 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key \"%s\" may not be sent to %s," pr_err 1213 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key \"%s\" may not be sent to %s," pr_err 1233 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Length of key name \"%s\" exceeds %d.\n", pr_err 1243 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key \"%s\" may not be sent to %s," pr_err 1249 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key \"%s\" may not be sent to %s," pr_err 1256 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key \"%s\" received twice, protocol error.\n", pr_err 1265 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Key \"%s\" may not be negotiated during ", pr_err 1362 drivers/target/iscsi/iscsi_target_parameters.c pr_err("Unable to allocate %u + 1 bytes for tmpbuf.\n", length); pr_err 1493 drivers/target/iscsi/iscsi_target_parameters.c pr_err("No response for proposed key \"%s\".\n", pr_err 134 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to allocate memory" pr_err 154 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to allocate memory for" pr_err 186 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to allocate memory for random array.\n"); pr_err 540 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to allocate struct iscsi_seq list\n"); pr_err 550 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to allocate struct iscsi_pdu list.\n"); pr_err 570 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("struct iscsi_cmd->pdu_list is NULL!\n"); pr_err 580 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to locate PDU holder for ITT: 0x%08x, Offset:" pr_err 594 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("struct iscsi_cmd->pdu_list is NULL!\n"); pr_err 622 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Command ITT: 0x%08x unable to locate" pr_err 628 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("struct iscsi_seq is NULL!\n"); pr_err 639 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Command ITT: 0x%08x seq->pdu_send" pr_err 653 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Command ITT: 0x%08x unable to locate iscsi" pr_err 670 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("struct iscsi_cmd->seq_list is NULL!\n"); pr_err 686 drivers/target/iscsi/iscsi_target_seq_pdu_list.c pr_err("Unable to locate Sequence holder for ITT: 0x%08x," pr_err 42 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unable to locate RefTaskTag: 0x%08x on CID:" pr_err 49 drivers/target/iscsi/iscsi_target_tmr.c pr_err("RefCmdSN 0x%08x does not equal" pr_err 74 drivers/target/iscsi/iscsi_target_tmr.c pr_err("TMR Opcode TARGET_WARM_RESET authorization" pr_err 94 drivers/target/iscsi/iscsi_target_tmr.c pr_err("TMR Opcode TARGET_COLD_RESET authorization" pr_err 122 drivers/target/iscsi/iscsi_target_tmr.c pr_err("TMR TASK_REASSIGN not supported in ERL<2," pr_err 129 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Command ITT: 0x%08x is still alligent to CID:" pr_err 133 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unable to locate RefTaskTag: 0x%08x in" pr_err 143 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unable to perform connection recovery for" pr_err 150 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unable to perform connection recovery for" pr_err 158 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unable to perform connection recovery for" pr_err 202 drivers/target/iscsi/iscsi_target_tmr.c pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x" pr_err 326 drivers/target/iscsi/iscsi_target_tmr.c pr_err("READ ITT: 0x%08x: t_state: %d, never returned" pr_err 370 drivers/target/iscsi/iscsi_target_tmr.c pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x" pr_err 403 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unknown cmd->data_direction: 0x%02x\n", pr_err 419 drivers/target/iscsi/iscsi_target_tmr.c pr_err("TMR Request is missing a RefCmd struct iscsi_cmd.\n"); pr_err 434 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Illegal iSCSI Opcode 0x%02x during" pr_err 730 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Initiator is requesting R2Ts from" pr_err 802 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Received ExpDataSN: 0x%08x for READ" pr_err 810 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Received ExpDataSN: 0x%08x for READ" pr_err 828 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Received ExpDataSN: 0x%08x for WRITE" pr_err 837 drivers/target/iscsi/iscsi_target_tmr.c pr_err("Unknown iSCSI data_direction: 0x%02x\n", pr_err 31 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to allocate struct iscsi_portal_group\n"); pr_err 58 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to allocate struct iscsi_portal_group\n"); pr_err 175 drivers/target/iscsi/iscsi_target_tpg.c pr_err("struct iscsi_tpg_np->tpg_np is NULL!\n"); pr_err 193 drivers/target/iscsi/iscsi_target_tpg.c pr_err("struct iscsi_tpg_np->tpg_np is NULL!\n"); pr_err 231 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to add iSCSI Target Portal Group: %d" pr_err 274 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to delete iSCSI Target Portal Group:" pr_err 311 drivers/target/iscsi/iscsi_target_tpg.c pr_err("iSCSI target portal group: %hu is already" pr_err 359 drivers/target/iscsi/iscsi_target_tpg.c pr_err("iSCSI Target Portal Group: %hu is already" pr_err 373 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to disable iSCSI Target Portal Group:" pr_err 464 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Network Portal: %pISc already exists on a" pr_err 473 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to allocate memory for" pr_err 545 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Unable to locate struct iscsi_np from" pr_err 561 drivers/target/iscsi/iscsi_target_tpg.c pr_err("iscsit_tpg_del_network_portal()" pr_err 592 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value for authentication parameter:" pr_err 651 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Requested Login Timeout %u larger than maximum" pr_err 655 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Requested Logout Timeout %u smaller than" pr_err 674 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Requested Network Interface Timeout %u larger" pr_err 679 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Requested Network Interface Timeout %u smaller" pr_err 699 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 723 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Requested Default Queue Depth: %u larger" pr_err 728 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Requested Default Queue Depth: %u smaller" pr_err 748 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 773 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 791 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 810 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 829 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value for default_erl: %u\n", default_erl); pr_err 846 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 865 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value for fabric_prot_type: %u\n", prot_type); pr_err 883 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 901 drivers/target/iscsi/iscsi_target_tpg.c pr_err("Illegal value %d\n", flag); pr_err 66 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to allocate memory for struct iscsi_r2t.\n"); pr_err 101 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to locate R2T for Offset: %u, Length:" pr_err 119 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to locate next R2T to send for ITT:" pr_err 224 drivers/target/iscsi/iscsi_target_util.c pr_err("struct iscsi_cmd->seq_list is NULL!\n"); pr_err 271 drivers/target/iscsi/iscsi_target_util.c pr_err("Received CmdSN: 0x%08x is greater than" pr_err 289 drivers/target/iscsi/iscsi_target_util.c pr_err("Received CmdSN: 0x%08x is less than" pr_err 361 drivers/target/iscsi/iscsi_target_util.c pr_err("Received unexpected unsolicited data" pr_err 370 drivers/target/iscsi/iscsi_target_util.c pr_err("Total %u bytes exceeds FirstBurstLength: %u" pr_err 385 drivers/target/iscsi/iscsi_target_util.c pr_err("Unsolicited non-immediate data received %u" pr_err 412 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to locate ITT: 0x%08x on CID: %hu", pr_err 436 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to locate ITT: 0x%08x on CID: %hu," pr_err 460 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to locate TTT: 0x%08x on CID: %hu\n", pr_err 526 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to allocate memory for" pr_err 587 drivers/target/iscsi/iscsi_target_util.c pr_err("ITT: 0x%08x immed_queue_count: %d\n", pr_err 602 drivers/target/iscsi/iscsi_target_util.c pr_err("Unable to allocate memory for" pr_err 664 drivers/target/iscsi/iscsi_target_util.c pr_err("ITT: 0x%08x response_queue_count: %d\n", pr_err 926 drivers/target/iscsi/iscsi_target_util.c pr_err("Did not receive response to NOPIN on CID: %hu, failing" pr_err 1082 drivers/target/iscsi/iscsi_target_util.c pr_err("tx_data() returned -EAGAIN\n"); pr_err 1113 drivers/target/iscsi/iscsi_target_util.c pr_err("tx_data() returned -EAGAIN\n"); pr_err 1144 drivers/target/iscsi/iscsi_target_util.c pr_err("tcp_sendpage() returned" pr_err 1149 drivers/target/iscsi/iscsi_target_util.c pr_err("tcp_sendpage() failure: %d\n", pr_err 1166 drivers/target/iscsi/iscsi_target_util.c pr_err("tx_data() returned -EAGAIN\n"); pr_err 1180 drivers/target/iscsi/iscsi_target_util.c pr_err("tx_data() returned -EAGAIN\n"); pr_err 1292 drivers/target/iscsi/iscsi_target_util.c pr_err("Data length is: %d\n", data); pr_err 208 drivers/target/loopback/tcm_loop.c pr_err("Unable to perform device reset without active I_T Nexus\n"); pr_err 285 drivers/target/loopback/tcm_loop.c pr_err("Unable to perform device reset without active I_T Nexus\n"); pr_err 329 drivers/target/loopback/tcm_loop.c pr_err("Unable to allocate struct scsi_host\n"); pr_err 355 drivers/target/loopback/tcm_loop.c pr_err("%s: scsi_add_host failed\n", __func__); pr_err 396 drivers/target/loopback/tcm_loop.c pr_err("device_register() failed for tl_hba->dev: %d\n", ret); pr_err 413 drivers/target/loopback/tcm_loop.c pr_err("Unable to allocate tcm_loop_primary\n"); pr_err 419 drivers/target/loopback/tcm_loop.c pr_err("bus_register() failed for tcm_loop_lld_bus\n"); pr_err 425 drivers/target/loopback/tcm_loop.c pr_err("driver_register() failed for tcm_loop_driverfs\n"); pr_err 658 drivers/target/loopback/tcm_loop.c pr_err("Unable to locate struct scsi_device for %d:%d:%llu\n", pr_err 695 drivers/target/loopback/tcm_loop.c pr_err("kstrtoul() returned %d for fabric_prot_type\n", ret); pr_err 699 drivers/target/loopback/tcm_loop.c pr_err("Invalid qla2xxx fabric_prot_type: %lu\n", val); pr_err 772 drivers/target/loopback/tcm_loop.c pr_err("Unable to remove TCM_Loop I_T Nexus with active TPG port count: %d\n", pr_err 831 drivers/target/loopback/tcm_loop.c pr_err("Emulated NAA Sas Address: %s, exceeds max: %d\n", pr_err 840 drivers/target/loopback/tcm_loop.c pr_err("Passed SAS Initiator Port %s does not match target port protoid: %s\n", pr_err 850 drivers/target/loopback/tcm_loop.c pr_err("Passed FCP Initiator Port %s does not match target port protoid: %s\n", pr_err 860 drivers/target/loopback/tcm_loop.c pr_err("Passed iSCSI Initiator Port %s does not match target port protoid: %s\n", pr_err 867 drivers/target/loopback/tcm_loop.c pr_err("Unable to locate prefix for emulated Initiator Port: %s\n", pr_err 968 drivers/target/loopback/tcm_loop.c pr_err("Unable to locate \"tpgt_#\" directory group\n"); pr_err 975 drivers/target/loopback/tcm_loop.c pr_err("Passed tpgt: %lu exceeds TL_TPGS_PER_HBA: %u\n", pr_err 1058 drivers/target/loopback/tcm_loop.c pr_err("Unable to locate prefix for emulated Target Port: %s\n", pr_err 1067 drivers/target/loopback/tcm_loop.c pr_err("Emulated NAA %s Address: %s, exceeds max: %d\n", pr_err 204 drivers/target/sbp/sbp_target.c pr_err("failed to init se_session\n"); pr_err 397 drivers/target/sbp/sbp_target.c pr_err("failed to allocate login descriptor\n"); pr_err 416 drivers/target/sbp/sbp_target.c pr_err("failed to map command block handler: %d\n", ret); pr_err 434 drivers/target/sbp/sbp_target.c pr_err("failed to allocate login response block\n"); pr_err 515 drivers/target/sbp/sbp_target.c pr_err("mgt_agent RECONNECT unknown login ID\n"); pr_err 524 drivers/target/sbp/sbp_target.c pr_err("mgt_agent RECONNECT login GUID doesn't match\n"); pr_err 1265 drivers/target/sbp/sbp_target.c pr_err("sbp_run_transaction: page size ignored\n"); pr_err 1380 drivers/target/sbp/sbp_target.c pr_err("sbp_send_sense: unknown sense format: 0x%x\n", pr_err 1478 drivers/target/sbp/sbp_target.c pr_err("mgt_orb bad request\n"); pr_err 1982 drivers/target/sbp/sbp_target.c pr_err("unlink LUN: failed to update unit directory\n"); pr_err 2001 drivers/target/sbp/sbp_target.c pr_err("Only one TPG per Unit is possible.\n"); pr_err 2113 drivers/target/sbp/sbp_target.c pr_err("Cannot change the directory_id on an active target.\n"); pr_err 2158 drivers/target/sbp/sbp_target.c pr_err("Cannot enable a target with no LUNs!\n"); pr_err 2175 drivers/target/sbp/sbp_target.c pr_err("Could not update Config ROM\n"); pr_err 299 drivers/target/target_core_alua.c pr_err("Unable to access l_lun->tg_pt_gp\n"); pr_err 739 drivers/target/target_core_alua.c pr_err("Unknown ALUA access state: 0x%02x\n", pr_err 802 drivers/target/target_core_alua.c pr_err("Unknown ALUA access state: 0x%02x\n", state); pr_err 809 drivers/target/target_core_alua.c pr_err("ALUA access state %s not supported", pr_err 890 drivers/target/target_core_alua.c pr_err("filp_open(%s) for ALUA metadata failed\n", path); pr_err 895 drivers/target/target_core_alua.c pr_err("Error writing ALUA metadata file: %s\n", path); pr_err 912 drivers/target/target_core_alua.c pr_err("Unable to allocate buf for ALUA metadata\n"); pr_err 1206 drivers/target/target_core_alua.c pr_err("Unable to allocate buf for ALUA metadata\n"); pr_err 1254 drivers/target/target_core_alua.c pr_err("Unable to complete secondary state" pr_err 1302 drivers/target/target_core_alua.c pr_err("Unable to allocate struct t10_alua_lba_map\n"); pr_err 1322 drivers/target/target_core_alua.c pr_err("Duplicate pg_id %d in lba_map\n", pg_id); pr_err 1329 drivers/target/target_core_alua.c pr_err("Unable to allocate struct t10_alua_lba_map_mem\n"); pr_err 1402 drivers/target/target_core_alua.c pr_err("Unable to allocate struct t10_alua_lu_gp\n"); pr_err 1434 drivers/target/target_core_alua.c pr_err("Maximum ALUA alua_lu_gps_count:" pr_err 1473 drivers/target/target_core_alua.c pr_err("Unable to allocate struct t10_alua_lu_gp_member\n"); pr_err 1639 drivers/target/target_core_alua.c pr_err("Unable to allocate struct t10_alua_tg_pt_gp\n"); pr_err 1702 drivers/target/target_core_alua.c pr_err("Maximum ALUA alua_tg_pt_gps_count:" pr_err 1718 drivers/target/target_core_alua.c pr_err("ALUA Target Port Group ID: %hu already" pr_err 1928 drivers/target/target_core_alua.c pr_err("ALUA Target Port Group alias too large!\n"); pr_err 2018 drivers/target/target_core_alua.c pr_err("Unable to extract alua_access_type\n"); pr_err 2022 drivers/target/target_core_alua.c pr_err("Illegal value for alua_access_type:" pr_err 2056 drivers/target/target_core_alua.c pr_err("Unable to extract nonop_delay_msecs\n"); pr_err 2060 drivers/target/target_core_alua.c pr_err("Passed nonop_delay_msecs: %lu, exceeds" pr_err 2087 drivers/target/target_core_alua.c pr_err("Unable to extract trans_delay_msecs\n"); pr_err 2091 drivers/target/target_core_alua.c pr_err("Passed trans_delay_msecs: %lu, exceeds" pr_err 2118 drivers/target/target_core_alua.c pr_err("Unable to extract implicit_trans_secs\n"); pr_err 2122 drivers/target/target_core_alua.c pr_err("Passed implicit_trans_secs: %lu, exceeds" pr_err 2149 drivers/target/target_core_alua.c pr_err("Unable to extract preferred ALUA value\n"); pr_err 2153 drivers/target/target_core_alua.c pr_err("Illegal value for preferred ALUA: %lu\n", tmp); pr_err 2186 drivers/target/target_core_alua.c pr_err("Unable to extract alua_tg_pt_offline value\n"); pr_err 2190 drivers/target/target_core_alua.c pr_err("Illegal value for alua_tg_pt_offline: %lu\n", pr_err 2219 drivers/target/target_core_alua.c pr_err("Unable to extract alua_tg_pt_status\n"); pr_err 2225 drivers/target/target_core_alua.c pr_err("Illegal value for alua_tg_pt_status: %lu\n", pr_err 2251 drivers/target/target_core_alua.c pr_err("Unable to extract alua_tg_pt_write_md\n"); pr_err 2255 drivers/target/target_core_alua.c pr_err("Illegal value for alua_tg_pt_write_md:" pr_err 112 drivers/target/target_core_configfs.c pr_err("db_root: cannot be changed: target drivers registered"); pr_err 118 drivers/target/target_core_configfs.c pr_err("db_root: count %d exceeds DB_ROOT_LEN-1: %u\n", pr_err 135 drivers/target/target_core_configfs.c pr_err("db_root: cannot open: %s\n", db_root_stage); pr_err 141 drivers/target/target_core_configfs.c pr_err("db_root: not a directory: %s\n", db_root_stage); pr_err 342 drivers/target/target_core_configfs.c pr_err("Passed alias: %s exceeds " pr_err 348 drivers/target/target_core_configfs.c pr_err("Missing tfo->fabric_name\n"); pr_err 352 drivers/target/target_core_configfs.c pr_err("Passed name: %s exceeds " pr_err 357 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_get_wwn()\n"); pr_err 361 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_get_tag()\n"); pr_err 365 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_check_demo_mode()\n"); pr_err 369 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_check_demo_mode_cache()\n"); pr_err 373 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_check_demo_mode_write_protect()\n"); pr_err 377 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_check_prod_mode_write_protect()\n"); pr_err 381 drivers/target/target_core_configfs.c pr_err("Missing tfo->tpg_get_inst_index()\n"); pr_err 385 drivers/target/target_core_configfs.c pr_err("Missing tfo->release_cmd()\n"); pr_err 389 drivers/target/target_core_configfs.c pr_err("Missing tfo->sess_get_index()\n"); pr_err 393 drivers/target/target_core_configfs.c pr_err("Missing tfo->write_pending()\n"); pr_err 397 drivers/target/target_core_configfs.c pr_err("Missing tfo->set_default_node_attributes()\n"); pr_err 401 drivers/target/target_core_configfs.c pr_err("Missing tfo->get_cmd_state()\n"); pr_err 405 drivers/target/target_core_configfs.c pr_err("Missing tfo->queue_data_in()\n"); pr_err 409 drivers/target/target_core_configfs.c pr_err("Missing tfo->queue_status()\n"); pr_err 413 drivers/target/target_core_configfs.c pr_err("Missing tfo->queue_tm_rsp()\n"); pr_err 417 drivers/target/target_core_configfs.c pr_err("Missing tfo->aborted_task()\n"); pr_err 421 drivers/target/target_core_configfs.c pr_err("Missing tfo->check_stop_free()\n"); pr_err 430 drivers/target/target_core_configfs.c pr_err("Missing tfo->fabric_make_wwn()\n"); pr_err 434 drivers/target/target_core_configfs.c pr_err("Missing tfo->fabric_drop_wwn()\n"); pr_err 438 drivers/target/target_core_configfs.c pr_err("Missing tfo->fabric_make_tpg()\n"); pr_err 442 drivers/target/target_core_configfs.c pr_err("Missing tfo->fabric_drop_tpg()\n"); pr_err 460 drivers/target/target_core_configfs.c pr_err("%s: could not allocate memory!\n", __func__); pr_err 633 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change model alias" pr_err 666 drivers/target/target_core_configfs.c pr_err("emulate_write_cache not supported for this device\n"); pr_err 688 drivers/target/target_core_configfs.c pr_err("Illegal value %d\n", val); pr_err 693 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device" pr_err 716 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device TAS while" pr_err 744 drivers/target/target_core_configfs.c pr_err("Generic Block Discard not supported\n"); pr_err 770 drivers/target/target_core_configfs.c pr_err("Generic Block Discard not supported\n"); pr_err 793 drivers/target/target_core_configfs.c pr_err("Illegal value %d for pi_prot_type\n", flag); pr_err 797 drivers/target/target_core_configfs.c pr_err("DIF TYPE2 protection currently not supported\n"); pr_err 810 drivers/target/target_core_configfs.c pr_err("DIF protection not supported by backend: %s\n", pr_err 815 drivers/target/target_core_configfs.c pr_err("DIF protection requires device to be configured\n"); pr_err 819 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device PROT type while" pr_err 865 drivers/target/target_core_configfs.c pr_err("DIF protection format not supported by backend %s\n", pr_err 870 drivers/target/target_core_configfs.c pr_err("DIF protection format requires device to be configured\n"); pr_err 874 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to format SE Device PROT type while" pr_err 927 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to set force_pr_aptpl while" pr_err 972 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device" pr_err 982 drivers/target/target_core_configfs.c pr_err("dev[%p]: Thin Provisioning LBPRZ will not be set" pr_err 1009 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device TCQ while" pr_err 1015 drivers/target/target_core_configfs.c pr_err("dev[%p]: Illegal ZERO value for queue_depth\n", dev); pr_err 1021 drivers/target/target_core_configfs.c pr_err("dev[%p]: Passed queue_depth:" pr_err 1045 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device" pr_err 1051 drivers/target/target_core_configfs.c pr_err("dev[%p]: Passed optimal_sectors %u cannot be" pr_err 1075 drivers/target/target_core_configfs.c pr_err("dev[%p]: Unable to change SE Device block_size" pr_err 1082 drivers/target/target_core_configfs.c pr_err("dev[%p]: Illegal value for block_device: %u" pr_err 1237 drivers/target/target_core_configfs.c pr_err("Emulated T10 Inquiry Data contains non-ASCII-printable characters\n"); pr_err 1272 drivers/target/target_core_configfs.c pr_err("Emulated T10 Vendor Identification exceeds" pr_err 1290 drivers/target/target_core_configfs.c pr_err("Unable to set T10 Vendor Identification while" pr_err 1328 drivers/target/target_core_configfs.c pr_err("Emulated T10 Vendor exceeds INQUIRY_MODEL_LEN: " pr_err 1346 drivers/target/target_core_configfs.c pr_err("Unable to set T10 Model while active %d exports exist\n", pr_err 1384 drivers/target/target_core_configfs.c pr_err("Emulated T10 Revision exceeds INQUIRY_REVISION_LEN: " pr_err 1402 drivers/target/target_core_configfs.c pr_err("Unable to set T10 Revision while active %d exports exist\n", pr_err 1444 drivers/target/target_core_configfs.c pr_err("Underlying SCSI device firmware provided VPD" pr_err 1450 drivers/target/target_core_configfs.c pr_err("Emulated VPD Unit Serial exceeds" pr_err 1461 drivers/target/target_core_configfs.c pr_err("Unable to set VPD Unit Serial while" pr_err 1895 drivers/target/target_core_configfs.c pr_err("APTPL metadata initiator_node=" pr_err 1909 drivers/target/target_core_configfs.c pr_err("APTPL metadata initiator_isid" pr_err 1919 drivers/target/target_core_configfs.c pr_err("kstrtoull() failed for sa_res_key=\n"); pr_err 1973 drivers/target/target_core_configfs.c pr_err("APTPL metadata target_node=" pr_err 2003 drivers/target/target_core_configfs.c pr_err("Illegal parameters for APTPL registration\n"); pr_err 2009 drivers/target/target_core_configfs.c pr_err("Illegal PR type: 0x%02x for reservation" pr_err 2102 drivers/target/target_core_configfs.c pr_err("alias count: %d exceeds" pr_err 2142 drivers/target/target_core_configfs.c pr_err("udev_path count: %d exceeds" pr_err 2181 drivers/target/target_core_configfs.c pr_err("For dev_enable ops, only valid value" pr_err 2231 drivers/target/target_core_configfs.c pr_err("ALUA LU Group Alias too large!\n"); pr_err 2366 drivers/target/target_core_configfs.c pr_err("Invalid line %d\n", num); pr_err 2374 drivers/target/target_core_configfs.c pr_err("Invalid line %d\n", num); pr_err 2380 drivers/target/target_core_configfs.c pr_err("Invalid line %d, missing end lba\n", num); pr_err 2387 drivers/target/target_core_configfs.c pr_err("Invalid line %d, missing state definitions\n", pr_err 2415 drivers/target/target_core_configfs.c pr_err("Invalid ALUA state '%c'\n", state); pr_err 2423 drivers/target/target_core_configfs.c pr_err("Invalid target descriptor %d:%c " pr_err 2438 drivers/target/target_core_configfs.c pr_err("Only %d from %d port groups definitions " pr_err 2523 drivers/target/target_core_configfs.c pr_err("kstrtoul() returned %d for" pr_err 2528 drivers/target/target_core_configfs.c pr_err("ALUA lu_gp_id: %lu exceeds maximum:" pr_err 2690 drivers/target/target_core_configfs.c pr_err("Unable to do implicit ALUA on non valid" pr_err 2695 drivers/target/target_core_configfs.c pr_err("Unable to set alua_access_state while device is" pr_err 2702 drivers/target/target_core_configfs.c pr_err("Unable to extract new ALUA access state from" pr_err 2709 drivers/target/target_core_configfs.c pr_err("Unable to process implicit configfs ALUA" pr_err 2716 drivers/target/target_core_configfs.c pr_err("Unable to process implicit configfs ALUA transition" pr_err 2742 drivers/target/target_core_configfs.c pr_err("Unable to do set ALUA access status on non" pr_err 2750 drivers/target/target_core_configfs.c pr_err("Unable to extract new ALUA access status" pr_err 2759 drivers/target/target_core_configfs.c pr_err("Illegal ALUA access status: 0x%02x\n", pr_err 2797 drivers/target/target_core_configfs.c pr_err("Unable to do set " #_name " ALUA state on non" \ pr_err 2805 drivers/target/target_core_configfs.c pr_err("Invalid value '%s', must be '0' or '1'\n", p); \ pr_err 2809 drivers/target/target_core_configfs.c pr_err("Invalid value '%ld', must be '0' or '1'\n", tmp); \ pr_err 2844 drivers/target/target_core_configfs.c pr_err("Unable to extract alua_write_metadata\n"); pr_err 2849 drivers/target/target_core_configfs.c pr_err("Illegal value for alua_write_metadata:" pr_err 2929 drivers/target/target_core_configfs.c pr_err("ALUA tg_pt_gp_id: invalid value '%s' for tg_pt_gp_id\n", pr_err 2934 drivers/target/target_core_configfs.c pr_err("ALUA tg_pt_gp_id: %lu exceeds maximum: 0x0000ffff\n", pr_err 3293 drivers/target/target_core_configfs.c pr_err("Unable to extract hba mode flag: %d\n", ret); pr_err 3298 drivers/target/target_core_configfs.c pr_err("Unable to set hba_mode with active devices\n"); pr_err 3352 drivers/target/target_core_configfs.c pr_err("Passed *name strlen(): %d exceeds" pr_err 3361 drivers/target/target_core_configfs.c pr_err("Unable to locate \"_\" for $SUBSYSTEM_PLUGIN_$HOST_ID\n"); pr_err 3381 drivers/target/target_core_configfs.c pr_err("kstrtoul() returned %d for" pr_err 3443 drivers/target/target_core_configfs.c pr_err("db_root: cannot open: %s\n", db_root_stage); pr_err 3448 drivers/target/target_core_configfs.c pr_err("db_root: not a valid directory: %s\n", db_root_stage); pr_err 3515 drivers/target/target_core_configfs.c pr_err("Error %d while registering subsystem %s\n", pr_err 83 drivers/target/target_core_device.c pr_err("TARGET_CORE[%s]: Detected WRITE_PROTECTED LUN" pr_err 102 drivers/target/target_core_device.c pr_err("TARGET_CORE[%s]: Detected NON_EXISTENT_LUN" pr_err 225 drivers/target/target_core_device.c pr_err("%s device entries device pointer is" pr_err 322 drivers/target/target_core_device.c pr_err("Unable to allocate se_dev_entry memory\n"); pr_err 345 drivers/target/target_core_device.c pr_err("Existing orig->se_lun doesn't match new lun" pr_err 610 drivers/target/target_core_device.c pr_err("%s InitiatorName exceeds maximum size.\n", pr_err 617 drivers/target/target_core_device.c pr_err("Unable to allocate memory for struct se_lun_acl.\n"); pr_err 919 drivers/target/target_core_device.c pr_err("se_dev->se_dev_ptr already set for storage" pr_err 79 drivers/target/target_core_fabric_configfs.c pr_err("Bad lun_ci, not a valid lun_ci pointer: %p\n", lun_ci); pr_err 88 drivers/target/target_core_fabric_configfs.c pr_err("Source se_lun->lun_se_dev does not exist\n"); pr_err 92 drivers/target/target_core_fabric_configfs.c pr_err("Unable to create mappedlun symlink because" pr_err 107 drivers/target/target_core_fabric_configfs.c pr_err("Illegal Initiator ACL SymLink outside of %s\n", pr_err 112 drivers/target/target_core_fabric_configfs.c pr_err("Illegal Initiator ACL Symlink outside of %s" pr_err 279 drivers/target/target_core_fabric_configfs.c pr_err("Unable to allocate memory for name buf\n"); pr_err 287 drivers/target/target_core_fabric_configfs.c pr_err("Unable to locate \"lun_\" from buf: %s" pr_err 476 drivers/target/target_core_fabric_configfs.c pr_err("tf->tf_ops.fabric_make_np is NULL\n"); pr_err 633 drivers/target/target_core_fabric_configfs.c pr_err("Bad se_dev_ci, not a valid se_dev_ci pointer: %p\n", se_dev_ci); pr_err 639 drivers/target/target_core_fabric_configfs.c pr_err("se_device not configured yet, cannot port link\n"); pr_err 649 drivers/target/target_core_fabric_configfs.c pr_err("Port Symlink already exists\n"); pr_err 655 drivers/target/target_core_fabric_configfs.c pr_err("core_dev_add_lun() failed: %d\n", ret); pr_err 751 drivers/target/target_core_fabric_configfs.c pr_err("Unable to locate \'_\" in" pr_err 833 drivers/target/target_core_fabric_configfs.c pr_err("tf->tf_ops->fabric_make_tpg is NULL\n"); pr_err 932 drivers/target/target_core_fabric_configfs.c pr_err("tf->tf_ops.fabric_make_wwn is NULL\n"); pr_err 286 drivers/target/target_core_fabric_lib.c pr_err("Illegal format code: 0x%02x for iSCSI" pr_err 321 drivers/target/target_core_fabric_lib.c pr_err("Unable to locate \",i,0x\" separator" pr_err 361 drivers/target/target_core_fabric_lib.c pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); pr_err 389 drivers/target/target_core_fabric_lib.c pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); pr_err 416 drivers/target/target_core_fabric_lib.c pr_err("Unknown proto_id: 0x%02x\n", tpg->proto_id); pr_err 42 drivers/target/target_core_file.c pr_err("Unable to allocate memory for struct fd_host\n"); pr_err 77 drivers/target/target_core_file.c pr_err("Unable to allocate memory for struct fd_dev\n"); pr_err 97 drivers/target/target_core_file.c pr_err("Missing fd_dev_name=\n"); pr_err 123 drivers/target/target_core_file.c pr_err("filp_open(%s) failed\n", fd_dev->fd_dev_name); pr_err 165 drivers/target/target_core_file.c pr_err("FILEIO: Missing fd_dev_size=" pr_err 331 drivers/target/target_core_file.c pr_err("Unable to allocate fd_do_readv iov[]\n"); pr_err 351 drivers/target/target_core_file.c pr_err("%s() write returned %d\n", __func__, ret); pr_err 363 drivers/target/target_core_file.c pr_err("%s() returned %d, expecting %u for " pr_err 371 drivers/target/target_core_file.c pr_err("%s() returned %d for non S_ISBLK\n", pr_err 423 drivers/target/target_core_file.c pr_err("FILEIO: vfs_fsync_range() failed: %d\n", ret); pr_err 453 drivers/target/target_core_file.c pr_err("WRITE_SAME: Protection information with FILEIO" pr_err 460 drivers/target/target_core_file.c pr_err("WRITE_SAME: Illegal SGL t_data_nents: %u length: %u" pr_err 485 drivers/target/target_core_file.c pr_err("vfs_iter_write() returned %zd for write same\n", ret); pr_err 503 drivers/target/target_core_file.c pr_err("Unable to locate fd_dev->fd_prot_file\n"); pr_err 514 drivers/target/target_core_file.c pr_err("vfs_write to prot file failed: %zd\n", ret); pr_err 531 drivers/target/target_core_file.c pr_err("Unable to allocate FILEIO prot buf\n"); pr_err 690 drivers/target/target_core_file.c pr_err("FILEIO: Not able to process I/O of %u bytes due to" pr_err 753 drivers/target/target_core_file.c pr_err("kstrtoull() failed for" pr_err 766 drivers/target/target_core_file.c pr_err("bogus fd_buffered_io=%d value\n", arg); pr_err 781 drivers/target/target_core_file.c pr_err("bogus fd_async_io=%d value\n", arg); pr_err 844 drivers/target/target_core_file.c pr_err("Unable to locate fd_dev->fd_file\n"); pr_err 850 drivers/target/target_core_file.c pr_err("FILEIO Protection emulation only supported on" pr_err 863 drivers/target/target_core_file.c pr_err("filp_open(%s) failed\n", buf); pr_err 879 drivers/target/target_core_file.c pr_err("Unable to format_prot while pi_prot_type == 0\n"); pr_err 885 drivers/target/target_core_file.c pr_err("Unable to allocate FILEIO prot buf\n"); pr_err 50 drivers/target/target_core_hba.c pr_err("backend %s already registered.\n", ops->name); pr_err 116 drivers/target/target_core_hba.c pr_err("Unable to allocate struct se_hba\n"); pr_err 60 drivers/target/target_core_iblock.c pr_err("Unable to allocate struct iblock_dev\n"); pr_err 80 drivers/target/target_core_iblock.c pr_err("Missing udev_path= parameters for IBLOCK\n"); pr_err 86 drivers/target/target_core_iblock.c pr_err("IBLOCK: Unable to create bioset\n"); pr_err 135 drivers/target/target_core_iblock.c pr_err("IBLOCK export of blk_integrity: %s not" pr_err 149 drivers/target/target_core_iblock.c pr_err("Unable to allocate bioset for PI\n"); pr_err 293 drivers/target/target_core_iblock.c pr_err("bio error: %p, err: %d\n", bio, bio->bi_status); pr_err 322 drivers/target/target_core_iblock.c pr_err("Unable to allocate memory for bio\n"); pr_err 351 drivers/target/target_core_iblock.c pr_err("IBLOCK: cache flush failed: %d\n", bio->bi_status); pr_err 403 drivers/target/target_core_iblock.c pr_err("blkdev_issue_discard() failed: %d\n", ret); pr_err 457 drivers/target/target_core_iblock.c pr_err("WRITE_SAME: Protection information with IBLOCK" pr_err 465 drivers/target/target_core_iblock.c pr_err("WRITE_SAME: Illegal SGL t_data_nents: %u length: %u" pr_err 554 drivers/target/target_core_iblock.c pr_err("Unable to set udev_path= while" pr_err 577 drivers/target/target_core_iblock.c pr_err("kstrtoul() failed for" pr_err 637 drivers/target/target_core_iblock.c pr_err("Unable to locate bio_integrity\n"); pr_err 644 drivers/target/target_core_iblock.c pr_err("Unable to allocate bio_integrity_payload\n"); pr_err 663 drivers/target/target_core_iblock.c pr_err("bio_integrity_add_page() failed; %d\n", rc); pr_err 181 drivers/target/target_core_pr.c pr_err("Received legacy SPC-2 RESERVE/RELEASE" pr_err 252 drivers/target/target_core_pr.c pr_err("LongIO and Obsolete Bits set, returning ILLEGAL_REQUEST\n"); pr_err 272 drivers/target/target_core_pr.c pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n", pr_err 274 drivers/target/target_core_pr.c pr_err("Original reserver LUN: %llu %s\n", pr_err 277 drivers/target/target_core_pr.c pr_err("Current attempt - LUN: %llu -> MAPPED LUN: %llu" pr_err 415 drivers/target/target_core_pr.c pr_err("Unknown PERSISTENT_RESERVE_OUT service" pr_err 462 drivers/target/target_core_pr.c pr_err("Unknown MI Service Action: 0x%02x\n", pr_err 629 drivers/target/target_core_pr.c pr_err("Unable to allocate struct t10_pr_registration\n"); pr_err 655 drivers/target/target_core_pr.c pr_err("Unable to locate PR deve %s mapped_lun: %llu\n", pr_err 773 drivers/target/target_core_pr.c pr_err("core_scsi3_lunacl_depend" pr_err 838 drivers/target/target_core_pr.c pr_err("Illegal parameters for APTPL registration\n"); pr_err 844 drivers/target/target_core_pr.c pr_err("Unable to allocate struct t10_pr_registration\n"); pr_err 965 drivers/target/target_core_pr.c pr_err("Unable to locate PR APTPL %s mapped_lun:" pr_err 1274 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unable to perform ALL_TG_PT=1" pr_err 1518 drivers/target/target_core_pr.c pr_err("Unable to allocate tidh_new\n"); pr_err 1563 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Illegal tpdl: %u + 28 byte header" pr_err 1603 drivers/target/target_core_pr.c pr_err(" core_scsi3_tpg_depend_item()" pr_err 1628 drivers/target/target_core_pr.c pr_err("configfs_depend_item() failed" pr_err 1648 drivers/target/target_core_pr.c pr_err("SPC-3 PR SPEC_I_PT: Unable to locate" pr_err 1660 drivers/target/target_core_pr.c pr_err("SPC-3 PR SPEC_I_PT: Illegal tid_len:" pr_err 1675 drivers/target/target_core_pr.c pr_err("Unable to locate %s dest_se_deve" pr_err 1687 drivers/target/target_core_pr.c pr_err("core_scsi3_lunacl_depend_item()" pr_err 1725 drivers/target/target_core_pr.c pr_err("Unable to allocate tidh_new\n"); pr_err 1924 drivers/target/target_core_pr.c pr_err("Unable to update renaming APTPL metadata," pr_err 1943 drivers/target/target_core_pr.c pr_err("Unable to update renaming APTPL metadata," pr_err 1981 drivers/target/target_core_pr.c pr_err("filp_open(%s) for APTPL metadata" pr_err 2034 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Could not update APTPL\n"); pr_err 2059 drivers/target/target_core_pr.c pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); pr_err 2097 drivers/target/target_core_pr.c pr_err("Unable to allocate" pr_err 2121 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER: Received" pr_err 2131 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER: SPEC_I_PT" pr_err 2142 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER: ALL_TG_PT=1" pr_err 2283 drivers/target/target_core_pr.c pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); pr_err 2292 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unable to locate" pr_err 2306 drivers/target/target_core_pr.c pr_err("SPC-3 PR RESERVE: Received res_key: 0x%016Lx" pr_err 2323 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); pr_err 2347 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Attempted RESERVE from" pr_err 2369 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Attempted RESERVE from" pr_err 2438 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unknown Service Action RESERVE Type:" pr_err 2524 drivers/target/target_core_pr.c pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); pr_err 2532 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unable to locate" pr_err 2582 drivers/target/target_core_pr.c pr_err("SPC-3 PR RELEASE: Received res_key: 0x%016Lx" pr_err 2598 drivers/target/target_core_pr.c pr_err("SPC-3 PR RELEASE: Attempted to release" pr_err 2685 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unable to locate" pr_err 2701 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER: Received" pr_err 2843 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unable to locate" pr_err 2853 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); pr_err 3131 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unknown Service Action PREEMPT%s" pr_err 3161 drivers/target/target_core_pr.c pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); pr_err 3177 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Unable to locate PR_REGISTERED" pr_err 3219 drivers/target/target_core_pr.c pr_err("SPC-3 PR: Illegal tid_len: %u + 24 byte header" pr_err 3239 drivers/target/target_core_pr.c pr_err("core_scsi3_tpg_depend_item() failed" pr_err 3252 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate" pr_err 3270 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER_AND_MOVE: Received" pr_err 3281 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate" pr_err 3309 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" pr_err 3316 drivers/target/target_core_pr.c pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s" pr_err 3335 drivers/target/target_core_pr.c pr_err("Unable to locate %s dest_node_acl for" pr_err 3343 drivers/target/target_core_pr.c pr_err("core_scsi3_nodeacl_depend_item() for" pr_err 3361 drivers/target/target_core_pr.c pr_err("Unable to locate %s dest_se_deve from RTPI:" pr_err 3368 drivers/target/target_core_pr.c pr_err("core_scsi3_lunacl_depend_item() failed\n"); pr_err 3562 drivers/target/target_core_pr.c pr_err("Received PERSISTENT_RESERVE CDB while legacy" pr_err 3677 drivers/target/target_core_pr.c pr_err("Unknown PERSISTENT_RESERVE_OUT service" pr_err 3701 drivers/target/target_core_pr.c pr_err("PRIN SA READ_KEYS SCSI Data Length: %u" pr_err 3755 drivers/target/target_core_pr.c pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u" pr_err 3828 drivers/target/target_core_pr.c pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:" pr_err 3892 drivers/target/target_core_pr.c pr_err("PRIN SA READ_FULL_STATUS SCSI Data Length: %u" pr_err 4047 drivers/target/target_core_pr.c pr_err("Received PERSISTENT_RESERVE CDB while legacy" pr_err 4067 drivers/target/target_core_pr.c pr_err("Unknown PERSISTENT_RESERVE_IN service" pr_err 58 drivers/target/target_core_pscsi.c pr_err("Unable to allocate struct pscsi_hba_virt\n"); pr_err 122 drivers/target/target_core_pscsi.c pr_err("pSCSI: Unable to locate SCSI Host for" pr_err 248 drivers/target/target_core_pscsi.c pr_err("page_83[3]: identifier" pr_err 256 drivers/target/target_core_pscsi.c pr_err("Unable to allocate memory for" pr_err 298 drivers/target/target_core_pscsi.c pr_err("Set broken SCSI Device %d:%d:%llu" pr_err 343 drivers/target/target_core_pscsi.c pr_err("Unable to allocate memory for struct pscsi_dev_virt\n"); pr_err 364 drivers/target/target_core_pscsi.c pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n", pr_err 377 drivers/target/target_core_pscsi.c pr_err("pSCSI: blkdev_get_by_path() failed\n"); pr_err 407 drivers/target/target_core_pscsi.c pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n", pr_err 439 drivers/target/target_core_pscsi.c pr_err("Missing scsi_channel_id=, scsi_target_id= and" pr_err 450 drivers/target/target_core_pscsi.c pr_err("pSCSI: Unable to locate struct" pr_err 459 drivers/target/target_core_pscsi.c pr_err("pSCSI: udev_path attribute has not" pr_err 470 drivers/target/target_core_pscsi.c pr_err("pSCSI: Unable to set hba_mode" pr_err 484 drivers/target/target_core_pscsi.c pr_err("pSCSI: Unable to locate" pr_err 492 drivers/target/target_core_pscsi.c pr_err("pSCSI: PHV_VIRTUAL_HOST_ID set while" pr_err 533 drivers/target/target_core_pscsi.c pr_err("pSCSI: Unable to locate %d:%d:%d:%d\n", sh->host_no, pr_err 658 drivers/target/target_core_pscsi.c pr_err("Unable to get buf for scatterlist\n"); pr_err 740 drivers/target/target_core_pscsi.c pr_err("PSCSI[%d]: Unable to accept" pr_err 837 drivers/target/target_core_pscsi.c pr_err("PSCSI: bio_kmalloc() failed\n"); pr_err 916 drivers/target/target_core_pscsi.c pr_err("pSCSI: failed to append bio\n"); pr_err 935 drivers/target/target_core_pscsi.c pr_err("pSCSI: failed to append bio\n"); pr_err 981 drivers/target/target_core_pscsi.c pr_err("PSCSI: blk_get_request() failed\n"); pr_err 155 drivers/target/target_core_rd.c pr_err("Unable to allocate scatterlist" pr_err 183 drivers/target/target_core_rd.c pr_err("Illegal page count: %u for Ramdisk device\n", pr_err 353 drivers/target/target_core_rd.c pr_err("Unable to locate struct rd_dev_sg_table for page: %u\n", pr_err 373 drivers/target/target_core_rd.c pr_err("Unable to locate struct prot rd_dev_sg_table for page: %u\n", pr_err 290 drivers/target/target_core_sbc.c pr_err("WRITE_SAME PBDATA and LBDATA" pr_err 305 drivers/target/target_core_sbc.c pr_err("WRITE_SAME exceeds last lba %llu (lba %llu, sectors %u)\n", pr_err 324 drivers/target/target_core_sbc.c pr_err("Got WRITE_SAME w/ UNMAP=1, but backend device" pr_err 367 drivers/target/target_core_sbc.c pr_err("Unable to allocate xor_callback buf\n"); pr_err 478 drivers/target/target_core_sbc.c pr_err("Unable to allocate compare_and_write buf\n"); pr_err 484 drivers/target/target_core_sbc.c pr_err("Unable to allocate compare_and_write sg\n"); pr_err 495 drivers/target/target_core_sbc.c pr_err("sg_copy_to_buffer() failed for compare_and_write\n"); pr_err 654 drivers/target/target_core_sbc.c pr_err("Unsupported protect field %d\n", protect); pr_err 680 drivers/target/target_core_sbc.c pr_err("Unsupported protect field %d\n", protect); pr_err 700 drivers/target/target_core_sbc.c pr_err("CDB contains protect bit, but device + fabric does" pr_err 739 drivers/target/target_core_sbc.c pr_err("Unable to determine pi_prot_type for CDB: 0x%02x " pr_err 773 drivers/target/target_core_sbc.c pr_err("Got CDB: 0x%02x with DPO bit set, but device" pr_err 780 drivers/target/target_core_sbc.c pr_err("Got CDB: 0x%02x with FUA bit set, but device" pr_err 944 drivers/target/target_core_sbc.c pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not" pr_err 957 drivers/target/target_core_sbc.c pr_err("VARIABLE_LENGTH_CMD service action" pr_err 976 drivers/target/target_core_sbc.c pr_err("COMPARE_AND_WRITE contains NoLB: %u greater" pr_err 1007 drivers/target/target_core_sbc.c pr_err("Unsupported SA: 0x%02x\n", pr_err 1034 drivers/target/target_core_sbc.c pr_err("Got UNMAP, but backend device has" pr_err 1044 drivers/target/target_core_sbc.c pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); pr_err 1058 drivers/target/target_core_sbc.c pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); pr_err 1117 drivers/target/target_core_sbc.c pr_err("cmd exceeds last lba %llu " pr_err 1301 drivers/target/target_core_sbc.c pr_err("DIFv1 checksum failed on sector %llu guard tag 0x%04x" pr_err 1313 drivers/target/target_core_sbc.c pr_err("DIFv1 Type 1 reference failed on sector: %llu tag: 0x%08x" pr_err 1321 drivers/target/target_core_sbc.c pr_err("DIFv1 Type 2 reference failed on sector: %llu tag: 0x%08x" pr_err 714 drivers/target/target_core_spc.c pr_err("Unable to allocate response buffer for INQUIRY\n"); pr_err 725 drivers/target/target_core_spc.c pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", pr_err 745 drivers/target/target_core_spc.c pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); pr_err 1085 drivers/target/target_core_spc.c pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", pr_err 1178 drivers/target/target_core_spc.c pr_err("REQUEST_SENSE description emulation not" pr_err 36 drivers/target/target_core_tmr.c pr_err("Unable to allocate struct se_tmr_req\n"); pr_err 191 drivers/target/target_core_tmr.c pr_err("Unable to locate struct se_cmd for TMR\n"); pr_err 309 drivers/target/target_core_tpg.c pr_err("ACL entry for %s Initiator" pr_err 469 drivers/target/target_core_tpg.c pr_err("Unable to locate se_tpg->se_tpg_tfo pointer\n"); pr_err 562 drivers/target/target_core_tpg.c pr_err("Unable to allocate se_lun memory\n"); pr_err 65 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for struct se_session" pr_err 73 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for struct se_ua failed\n"); pr_err 80 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for struct t10_pr_registration" pr_err 88 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for t10_alua_lu_gp_cache" pr_err 96 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for t10_alua_lu_gp_mem_" pr_err 104 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for t10_alua_tg_pt_gp_" pr_err 113 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for t10_alua_lba_map_" pr_err 122 drivers/target/target_core_transport.c pr_err("kmem_cache_create() for t10_alua_lba_map_mem_" pr_err 197 drivers/target/target_core_transport.c pr_err("Unable to load target_core_iblock\n"); pr_err 201 drivers/target/target_core_transport.c pr_err("Unable to load target_core_file\n"); pr_err 205 drivers/target/target_core_transport.c pr_err("Unable to load target_core_pscsi\n"); pr_err 209 drivers/target/target_core_transport.c pr_err("Unable to load target_core_user\n"); pr_err 250 drivers/target/target_core_transport.c pr_err("Unable to allocate struct se_session from" pr_err 280 drivers/target/target_core_transport.c pr_err("Unable to allocate se_sess->sess_cmd_map\n"); pr_err 287 drivers/target/target_core_transport.c pr_err("Unable to init se_sess->sess_tag_pool," pr_err 313 drivers/target/target_core_transport.c pr_err("init_session_tags called with percpu-ida tag_num:" pr_err 318 drivers/target/target_core_transport.c pr_err("init_session_tags called with percpu-ida tag_size:" pr_err 1315 drivers/target/target_core_transport.c pr_err("Failing OVERFLOW/UNDERFLOW for LBA op" pr_err 1410 drivers/target/target_core_transport.c pr_err("Received SCSI CDB with command_size: %d that" pr_err 1424 drivers/target/target_core_transport.c pr_err("Unable to allocate cmd->t_task_cdb" pr_err 1469 drivers/target/target_core_transport.c pr_err("cmd->se_lun is NULL\n"); pr_err 1474 drivers/target/target_core_transport.c pr_err("transport_generic_handle_cdb cannot be called" pr_err 1896 drivers/target/target_core_transport.c pr_err("Unknown transport error for CDB 0x%02x: %d\n", pr_err 3328 drivers/target/target_core_transport.c pr_err("Unknown TMR function: 0x%02x.\n", pr_err 84 drivers/target/target_core_ua.c pr_err("Unable to allocate struct se_ua\n"); pr_err 219 drivers/target/target_core_user.c pr_err("global_max_data_area must be larger than 0.\n"); pr_err 267 drivers/target/target_core_user.c pr_err("Invalid block netlink value %u\n", val); pr_err 288 drivers/target/target_core_user.c pr_err("Could not reset device's netlink interface. Netlink is not blocked.\n"); pr_err 313 drivers/target/target_core_user.c pr_err("Invalid reset netlink value %u\n", val); pr_err 376 drivers/target/target_core_user.c pr_err("tcmu nl cmd %u/%d completion could not find device with dev id %u.\n", pr_err 388 drivers/target/target_core_user.c pr_err("Mismatched commands on %s (Expecting reply for %d. Current %d).\n", pr_err 896 drivers/target/target_core_user.c pr_err("tcmu: Could not allocate cmd id.\n"); pr_err 1224 drivers/target/target_core_user.c pr_err("ring broken, not handling completions\n"); pr_err 1247 drivers/target/target_core_user.c pr_err("cmd_id %u not found, ring is broken\n", pr_err 1518 drivers/target/target_core_user.c pr_err("Invalid addr to data block mapping (dbi %u) on device %s\n", pr_err 2104 drivers/target/target_core_user.c pr_err("match_int() failed for dev attrib. Error %d.\n", pr_err 2110 drivers/target/target_core_user.c pr_err("Invalid dev attrib value %d. Must be greater than zero.\n", pr_err 2124 drivers/target/target_core_user.c pr_err("match_int() failed for max_data_area_mb=. Error %d.\n", pr_err 2130 drivers/target/target_core_user.c pr_err("Invalid max_data_area %d.\n", val); pr_err 2136 drivers/target/target_core_user.c pr_err("Cannot set max_data_area_mb after it has been enabled.\n"); pr_err 2143 drivers/target/target_core_user.c pr_err("%d is too large. Adjusting max_data_area_mb to global limit of %u\n", pr_err 2184 drivers/target/target_core_user.c pr_err("match_u64() failed for dev_size=. Error %d.\n", pr_err 2198 drivers/target/target_core_user.c pr_err("match_int() failed for nl_reply_supported=. Error %d.\n", pr_err 2264 drivers/target/target_core_user.c pr_err("Unable to set tcmu cmd_time_out while exports exist\n"); pr_err 2370 drivers/target/target_core_user.c pr_err("Unable to reconfigure device\n"); pr_err 2432 drivers/target/target_core_user.c pr_err("Unable to reconfigure device\n"); pr_err 2514 drivers/target/target_core_user.c pr_err("Unable to reconfigure device\n"); pr_err 2548 drivers/target/target_core_user.c pr_err("Device is not configured.\n"); pr_err 2557 drivers/target/target_core_user.c pr_err("Invalid block value %d\n", val); pr_err 2580 drivers/target/target_core_user.c pr_err("Device is not configured.\n"); pr_err 2589 drivers/target/target_core_user.c pr_err("Invalid reset ring value %d\n", val); pr_err 76 drivers/target/target_core_xcopy.c pr_err("configfs_depend_item attempt failed: %d for se_dev: %p\n", pr_err 120 drivers/target/target_core_xcopy.c pr_err("XCOPY 0xe4: code set of non binary type not supported\n"); pr_err 124 drivers/target/target_core_xcopy.c pr_err("XCOPY 0xe4: association other than LUN not supported\n"); pr_err 128 drivers/target/target_core_xcopy.c pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n", pr_err 138 drivers/target/target_core_xcopy.c pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len); pr_err 146 drivers/target/target_core_xcopy.c pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n", pr_err 204 drivers/target/target_core_xcopy.c pr_err("XCOPY target descriptor list length is not" pr_err 210 drivers/target/target_core_xcopy.c pr_err("XCOPY target descriptor supports a maximum" pr_err 240 drivers/target/target_core_xcopy.c pr_err("XCOPY unsupported descriptor type code:" pr_err 257 drivers/target/target_core_xcopy.c pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " pr_err 293 drivers/target/target_core_xcopy.c pr_err("XCOPY segment desc 0x02: Illegal desc_len:" pr_err 303 drivers/target/target_core_xcopy.c pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n", pr_err 337 drivers/target/target_core_xcopy.c pr_err("XCOPY segment descriptor list length is not" pr_err 343 drivers/target/target_core_xcopy.c pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too" pr_err 365 drivers/target/target_core_xcopy.c pr_err("XCOPY unsupported segment descriptor" pr_err 465 drivers/target/target_core_xcopy.c pr_err("Unable to allocate xcopy_wq\n"); pr_err 617 drivers/target/target_core_xcopy.c pr_err("Unable to allocate xcopy_pt_cmd\n"); pr_err 679 drivers/target/target_core_xcopy.c pr_err("Unable to allocate xcopy_pt_cmd\n"); pr_err 842 drivers/target/target_core_xcopy.c pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n"); pr_err 855 drivers/target/target_core_xcopy.c pr_err("XCOPY descriptor list length %u exceeds maximum %u\n", pr_err 863 drivers/target/target_core_xcopy.c pr_err("XCOPY with non zero inline data length\n"); pr_err 868 drivers/target/target_core_xcopy.c pr_err("XCOPY parameter truncation: data length %u too small " pr_err 899 drivers/target/target_core_xcopy.c pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev" pr_err 926 drivers/target/target_core_xcopy.c pr_err("EXTENDED_COPY operation explicitly disabled\n"); pr_err 932 drivers/target/target_core_xcopy.c pr_err("EXTENDED_COPY(LID4) not supported\n"); pr_err 941 drivers/target/target_core_xcopy.c pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", pr_err 968 drivers/target/target_core_xcopy.c pr_err("transport_kmap_data_sg failed in" pr_err 974 drivers/target/target_core_xcopy.c pr_err("Receive Copy Results Op Parameters length" pr_err 1062 drivers/target/target_core_xcopy.c pr_err("Receive Copy Results with non zero list identifier" pr_err 1075 drivers/target/target_core_xcopy.c pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa); pr_err 241 drivers/target/tcm_fc/tfc_conf.c pr_err("Error, a single TPG=1 is used for HW port mappings\n"); pr_err 232 drivers/target/tcm_fc/tfc_io.c pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, " pr_err 87 drivers/tc/tc.c pr_err("tc%x: unable to allocate tc_dev\n", slot); pr_err 125 drivers/tc/tc.c pr_err("%s: Cannot provide slot space " pr_err 178 drivers/tc/tc.c pr_err("tc: Cannot reserve resource\n"); pr_err 190 drivers/tc/tc.c pr_err("tc: Cannot reserve resource\n"); pr_err 460 drivers/tee/optee/core.c pr_err("static shm service not available\n"); pr_err 465 drivers/tee/optee/core.c pr_err("only normal cached shared memory supported\n"); pr_err 475 drivers/tee/optee/core.c pr_err("too small shared memory area\n"); pr_err 481 drivers/tee/optee/core.c pr_err("shared memory ioremap failed\n"); pr_err 58 drivers/tee/optee/device.c pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n", pr_err 83 drivers/tee/optee/device.c pr_err("device registration failed, err: %d\n", rc); pr_err 128 drivers/tee/optee/device.c pr_err("tee_shm_alloc failed\n"); pr_err 139 drivers/tee/optee/device.c pr_err("tee_shm_get_va failed\n"); pr_err 364 drivers/tee/optee/rpc.c pr_err("%s: tee_shm_get_va %p failed\n", __func__, shm); pr_err 780 drivers/tee/tee_core.c pr_err("could not register %s driver\n", pr_err 1083 drivers/tee/tee_core.c pr_err("couldn't create class\n"); pr_err 1089 drivers/tee/tee_core.c pr_err("failed to allocate char dev region\n"); pr_err 1095 drivers/tee/tee_core.c pr_err("failed to register tee bus\n"); pr_err 548 drivers/thermal/cpu_cooling.c pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy); pr_err 622 drivers/thermal/cpu_cooling.c pr_err("%s: Failed to add freq constraint (%d)\n", __func__, pr_err 697 drivers/thermal/cpu_cooling.c pr_err("cpu_cooling: OF node not available for cpu%d\n", pr_err 708 drivers/thermal/cpu_cooling.c pr_err("cpu_cooling: cpu%d failed to register as cooling device: %ld\n", pr_err 86 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_err("Invalid _TRT data\n"); pr_err 164 drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c pr_err("Invalid _ART data\n"); pr_err 108 drivers/thermal/intel/intel_powerclamp.c pr_err("Out of recommended range %lu, between 6-25ms\n", pr_err 156 drivers/thermal/intel/intel_powerclamp.c pr_err("Out of recommended window size %lu, between 2-10\n", pr_err 663 drivers/thermal/intel/intel_powerclamp.c pr_err("CPU does not support MWAIT\n"); pr_err 697 drivers/thermal/of-thermal.c pr_err("missing trip property\n"); pr_err 716 drivers/thermal/of-thermal.c pr_err("Add a cooling_device property with at least one device\n"); pr_err 728 drivers/thermal/of-thermal.c pr_err("Invalid cooling-device entry\n"); pr_err 738 drivers/thermal/of-thermal.c pr_err("wrong reference to cooling device, missing limits\n"); pr_err 815 drivers/thermal/of-thermal.c pr_err("missing temperature property\n"); pr_err 822 drivers/thermal/of-thermal.c pr_err("missing hysteresis property\n"); pr_err 829 drivers/thermal/of-thermal.c pr_err("wrong trip type property\n"); pr_err 863 drivers/thermal/of-thermal.c pr_err("no thermal zone np\n"); pr_err 873 drivers/thermal/of-thermal.c pr_err("%pOFn: missing polling-delay-passive property\n", np); pr_err 880 drivers/thermal/of-thermal.c pr_err("%pOFn: missing polling-delay property\n", np); pr_err 1033 drivers/thermal/of-thermal.c pr_err("failed to build thermal zone %pOFn: %ld\n", pr_err 1068 drivers/thermal/of-thermal.c pr_err("Failed to build %pOFn zone %ld\n", child, pr_err 516 drivers/thermal/rockchip_thermal.c pr_err("%s: unknown table mode: %d\n", __func__, table->mode); pr_err 521 drivers/thermal/rockchip_thermal.c pr_err("%s: invalid temperature, temp=%d error=%d\n", pr_err 573 drivers/thermal/rockchip_thermal.c pr_err("%s: unknown table mode: %d\n", __func__, table->mode); pr_err 925 drivers/thermal/tegra/soctherm.c pr_err("soctherm: Ignored unexpected INTRs 0x%08x\n", st); pr_err 1010 drivers/thermal/tegra/soctherm.c pr_err("soctherm: ERROR in handling %s alarm\n", pr_err 1043 drivers/thermal/tegra/soctherm.c pr_err("soctherm: OC ALARM 0x%08x\n", ex); pr_err 1078 drivers/thermal/tegra/soctherm.c pr_err("soctherm: Ignored unexpected OC ALARM 0x%08x\n", st); pr_err 1278 drivers/thermal/tegra/soctherm.c pr_err("%s: Failed to create IRQ domain\n", __func__); pr_err 262 drivers/thermal/thermal_core.c pr_err("Failed to register governor: '%s'", pr_err 1249 drivers/thermal/thermal_core.c pr_err("Error: No thermal zone type defined\n"); pr_err 1254 drivers/thermal/thermal_core.c pr_err("Error: Thermal zone name (%s) too long, should be under %d chars\n", pr_err 1260 drivers/thermal/thermal_core.c pr_err("Error: Incorrect number of thermal trips\n"); pr_err 1265 drivers/thermal/thermal_core.c pr_err("Error: Thermal zone device ops not defined\n"); pr_err 308 drivers/thermal/ti-soc-thermal/ti-bandgap.c pr_err("%s: invalid bandgap pointer\n", __func__); pr_err 122 drivers/tty/ehv_bytechan.c pr_err("ehv-bc: no 'interrupts' property in %pOF node\n", np); pr_err 131 drivers/tty/ehv_bytechan.c pr_err("ehv-bc: no 'hv-handle' property in %pOFn node\n", pr_err 792 drivers/tty/ehv_bytechan.c pr_err("ehv-bc: could not register tty driver (ret=%i)\n", ret); pr_err 798 drivers/tty/ehv_bytechan.c pr_err("ehv-bc: could not register platform driver (ret=%i)\n", pr_err 306 drivers/tty/goldfish.c pr_err("goldfish_tty: No MEM resource available!\n"); pr_err 312 drivers/tty/goldfish.c pr_err("goldfish_tty: Unable to ioremap base!\n"); pr_err 318 drivers/tty/goldfish.c pr_err("goldfish_tty: No IRQ resource available!\n"); pr_err 332 drivers/tty/goldfish.c pr_err("goldfish_tty: Reached maximum tty number of %d.\n", pr_err 384 drivers/tty/goldfish.c pr_err("goldfish_tty: No IRQ available!\n"); pr_err 1373 drivers/tty/hvc/hvc_iucv.c pr_err("%lu is not a valid value for the hvc_iucv= " pr_err 1391 drivers/tty/hvc/hvc_iucv.c pr_err("Allocating memory failed with " pr_err 1395 drivers/tty/hvc/hvc_iucv.c pr_err("hvc_iucv_allow= does not specify a valid " pr_err 1399 drivers/tty/hvc/hvc_iucv.c pr_err("hvc_iucv_allow= specifies too many " pr_err 1411 drivers/tty/hvc/hvc_iucv.c pr_err("Allocating memory failed with reason code=%d\n", 1); pr_err 1419 drivers/tty/hvc/hvc_iucv.c pr_err("Allocating memory failed with reason code=%d\n", 2); pr_err 1429 drivers/tty/hvc/hvc_iucv.c pr_err("Registering HVC terminal device as " pr_err 1438 drivers/tty/hvc/hvc_iucv.c pr_err("Creating a new HVC terminal device " pr_err 1447 drivers/tty/hvc/hvc_iucv.c pr_err("Registering IUCV handlers failed with error code=%d\n", pr_err 170 drivers/tty/hvc/hvc_opal.c pr_err("hvc_opal: Unknown protocol for %pOF\n", pr_err 201 drivers/tty/hvc/hvc_opal.c pr_err("hvc_opal: Device %pOF has duplicate terminal number #%d\n", pr_err 219 drivers/tty/hvc/hvc_opal.c pr_err("hvc_opal: Unable to map interrupt for device %pOF\n", pr_err 316 drivers/tty/hvc/hvc_vio.c pr_err("hvc_vio: Unknown protocol for %pOF\n", vdev->dev.of_node); pr_err 761 drivers/tty/hvc/hvcs.c pr_err("HVCS: Failed to initialize core driver.\n"); pr_err 1579 drivers/tty/ipwireless/hardware.c pr_err(IPWIRELESS_PCCARD_NAME pr_err 1665 drivers/tty/isicom.c pr_err("Unable to register pci driver.\n"); pr_err 2809 drivers/tty/n_gsm.c pr_err("alloc_netdev failed"); pr_err 2830 drivers/tty/n_gsm.c pr_err("network register fail %d\n", retval); pr_err 3228 drivers/tty/n_gsm.c pr_err("n_gsm: can't register line discipline (err = %d)\n", pr_err 3236 drivers/tty/n_gsm.c pr_err("gsm_init: tty allocation failed.\n"); pr_err 3257 drivers/tty/n_gsm.c pr_err("gsm_init: tty registration failed.\n"); pr_err 3269 drivers/tty/n_gsm.c pr_err("n_gsm: can't unregister line discipline (err = %d)\n", pr_err 206 drivers/tty/n_tracerouter.c pr_err("%s: Registration failed: %d\n", __func__, retval); pr_err 222 drivers/tty/n_tracerouter.c pr_err("%s: Unregistration failed: %d\n", __func__, retval); pr_err 204 drivers/tty/n_tracesink.c pr_err("%s: Registration failed: %d\n", __func__, retval); pr_err 219 drivers/tty/n_tracesink.c pr_err("%s: Unregistration failed: %d\n", __func__, retval); pr_err 133 drivers/tty/serial/8250/8250_mtk.c pr_err("failed to prepare rx slave single\n"); pr_err 170 drivers/tty/serial/8250/8250_mtk.c pr_err("failed to configure rx dma channel\n"); pr_err 172 drivers/tty/serial/8250/8250_mtk.c pr_err("failed to configure tx dma channel\n"); pr_err 1511 drivers/tty/serial/8250/8250_omap.c pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", pr_err 1513 drivers/tty/serial/8250/8250_omap.c pr_err("This ensures that you still see kernel messages. Please\n"); pr_err 1514 drivers/tty/serial/8250/8250_omap.c pr_err("update your kernel commandline.\n"); pr_err 1129 drivers/tty/serial/8250/8250_pci.c pr_err("quatech: unknown port type '0x%04X'.\n", devid); pr_err 2184 drivers/tty/serial/8250/8250_port.c pr_err("%s TX FIFO Threshold errors, skipping\n", pr_err 363 drivers/tty/serial/8250/serial_cs.c pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", pr_err 219 drivers/tty/serial/altera_jtaguart.c pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " pr_err 334 drivers/tty/serial/altera_uart.c pr_err(DRV_NAME ": unable to attach Altera UART %d " pr_err 1228 drivers/tty/serial/cpm_uart/cpm_uart_core.c pr_err("can't request gpio #%d: %d\n", i, ret); pr_err 1236 drivers/tty/serial/cpm_uart/cpm_uart_core.c pr_err("can't set direction for gpio #%d: %d\n", pr_err 50 drivers/tty/serial/earlycon.c pr_err("%s: Couldn't map %pa\n", __func__, &paddr); pr_err 200 drivers/tty/serial/ifx6x60.c pr_err("swap_buf_16: swap exceeds boundary (%p > %p)!", pr_err 226 drivers/tty/serial/ifx6x60.c pr_err("swap_buf_32: swap exceeds boundary (%p > %p)!\n", pr_err 1393 drivers/tty/serial/ifx6x60.c pr_err("%s: alloc_tty_driver failed", DRVNAME); pr_err 1409 drivers/tty/serial/ifx6x60.c pr_err("%s: tty_register_driver failed(%d)", pr_err 1416 drivers/tty/serial/ifx6x60.c pr_err("%s: spi_register_driver failed(%d)", pr_err 1423 drivers/tty/serial/ifx6x60.c pr_err("%s: register ifx modem reboot notifier failed(%d)", pr_err 251 drivers/tty/serial/kgdb_nmi.c pr_err("%s: can't install tty port: %d\n", __func__, ret); pr_err 335 drivers/tty/serial/kgdb_nmi.c pr_err("%s: cannot allocate tty\n", __func__); pr_err 351 drivers/tty/serial/kgdb_nmi.c pr_err("%s: can't register tty driver: %d\n", __func__, ret); pr_err 241 drivers/tty/serial/kgdboc.c pr_err("config string too long\n"); pr_err 252 drivers/tty/serial/kgdboc.c pr_err("Cannot reconfigure while KGDB is connected.\n"); pr_err 310 drivers/tty/serial/kgdboc.c pr_err("config string not provided\n"); pr_err 315 drivers/tty/serial/kgdboc.c pr_err("config string too long\n"); pr_err 884 drivers/tty/serial/lantiq.c pr_err("failed to get fpi clk\n"); pr_err 902 drivers/tty/serial/men_z135_uart.c pr_err("Failed to register UART: %d\n", err); pr_err 908 drivers/tty/serial/men_z135_uart.c pr_err("Failed to register MCB driver: %d\n", err); pr_err 590 drivers/tty/serial/milbeaut_usio.c pr_err("%s: uart registration failed: %d\n", __func__, ret); pr_err 596 drivers/tty/serial/milbeaut_usio.c pr_err("%s: drv registration failed: %d\n", __func__, ret); pr_err 580 drivers/tty/serial/mpc52xx_uart.c pr_err("%s: Can't find FIFOC node\n", __func__); pr_err 590 drivers/tty/serial/mpc52xx_uart.c pr_err("%s: Can't lookup FIFO clock\n", __func__); pr_err 595 drivers/tty/serial/mpc52xx_uart.c pr_err("%s: Can't enable FIFO clock\n", __func__); pr_err 603 drivers/tty/serial/mpc52xx_uart.c pr_err("%s: Can't map FIFOC\n", __func__); pr_err 609 drivers/tty/serial/mpc52xx_uart.c pr_err("%s: Can't get FIFOC irq\n", __func__); pr_err 1408 drivers/tty/serial/msm_serial.c pr_err("msm_serial: Unknown PM state %d\n", state); pr_err 932 drivers/tty/serial/pic32_uart.c pr_err("failed to register %s:%d\n", pr_err 939 drivers/tty/serial/pic32_uart.c pr_err("fail to register pic32 uart\n"); pr_err 92 drivers/tty/serial/pmac_zilog.c #define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg) pr_err 940 drivers/tty/serial/qcom_geni_serial.c pr_err("%s: Can't find matching DFS entry for baud %d\n", pr_err 1081 drivers/tty/serial/qcom_geni_serial.c pr_err("Invalid line %d\n", co->index); pr_err 1814 drivers/tty/serial/samsung.c pr_err("%s: Controller clock not found\n", pr_err 1822 drivers/tty/serial/samsung.c pr_err("uart: clock failed to prepare+enable: %d\n", ret); pr_err 1929 drivers/tty/serial/samsung.c pr_err("Failed to register Samsung UART driver\n"); pr_err 1502 drivers/tty/serial/sc16is7xx.c pr_err("Registering UART driver failed\n"); pr_err 1509 drivers/tty/serial/sc16is7xx.c pr_err("failed to init sc16is7xx i2c --> %d\n", ret); pr_err 1517 drivers/tty/serial/sc16is7xx.c pr_err("failed to init sc16is7xx spi --> %d\n", ret); pr_err 1676 drivers/tty/serial/serial-tegra.c pr_err("Could not register %s driver\n", pr_err 1683 drivers/tty/serial/serial-tegra.c pr_err("Uart platform driver register failed, e = %d\n", ret); pr_err 2875 drivers/tty/serial/sh-sci.c pr_err("Can't probe register map for given port\n"); pr_err 1227 drivers/tty/serial/sprd_serial.c pr_err("Failed to register SPRD-UART driver\n"); pr_err 916 drivers/tty/sysrq.c pr_err("Failed to register input sysrq handler, error %d\n", pr_err 923 drivers/tty/sysrq.c pr_err("Failed to open input device, error %d\n", error); pr_err 980 drivers/tty/sysrq.c pr_err("Failed to register input handler, error %d", error); pr_err 1120 drivers/tty/sysrq.c pr_err("Failed to register proc interface\n"); pr_err 3116 drivers/tty/tty_io.c pr_err("%s: Attempt to register invalid tty line number (%d)\n", pr_err 351 drivers/tty/vcc.c pr_err("VCC: unknown msg [%02x:%02x:%04x:%08x]\n", pr_err 465 drivers/tty/vcc.c pr_err("VCC: unexpected LDC event(%d)\n", event); pr_err 581 drivers/tty/vcc.c pr_err("VCC: TTY driver not registered\n"); pr_err 607 drivers/tty/vcc.c pr_err("VCC: no more TTY indices left for allocation\n"); pr_err 744 drivers/tty/vcc.c pr_err("VCC: open: Invalid TTY handle\n"); pr_err 753 drivers/tty/vcc.c pr_err("VCC: open: Failed to find VCC port\n"); pr_err 758 drivers/tty/vcc.c pr_err("VCC: open: LDC channel not configured\n"); pr_err 767 drivers/tty/vcc.c pr_err("VCC: open: TTY port not found\n"); pr_err 772 drivers/tty/vcc.c pr_err("VCC: open: TTY ops not defined\n"); pr_err 782 drivers/tty/vcc.c pr_err("VCC: close: Invalid TTY handle\n"); pr_err 790 drivers/tty/vcc.c pr_err("VCC: close: TTY port not found\n"); pr_err 814 drivers/tty/vcc.c pr_err("VCC: hangup: Invalid TTY handle\n"); pr_err 820 drivers/tty/vcc.c pr_err("VCC: hangup: Failed to find VCC port\n"); pr_err 825 drivers/tty/vcc.c pr_err("VCC: hangup: TTY port not found\n"); pr_err 848 drivers/tty/vcc.c pr_err("VCC: write: Invalid TTY handle\n"); pr_err 854 drivers/tty/vcc.c pr_err("VCC: write: Failed to find VCC port"); pr_err 913 drivers/tty/vcc.c pr_err("VCC: write_room: Invalid TTY handle\n"); pr_err 919 drivers/tty/vcc.c pr_err("VCC: write_room: Failed to find VCC port\n"); pr_err 936 drivers/tty/vcc.c pr_err("VCC: chars_in_buffer: Invalid TTY handle\n"); pr_err 942 drivers/tty/vcc.c pr_err("VCC: chars_in_buffer: Failed to find VCC port\n"); pr_err 959 drivers/tty/vcc.c pr_err("VCC: break_ctl: Invalid TTY handle\n"); pr_err 965 drivers/tty/vcc.c pr_err("VCC: break_ctl: Failed to find VCC port\n"); pr_err 994 drivers/tty/vcc.c pr_err("VCC: install: Invalid TTY handle\n"); pr_err 1011 drivers/tty/vcc.c pr_err("VCC: install: Failed to find VCC port\n"); pr_err 1033 drivers/tty/vcc.c pr_err("VCC: cleanup: Invalid TTY handle\n"); pr_err 1078 drivers/tty/vcc.c pr_err("VCC: TTY driver alloc failed\n"); pr_err 1093 drivers/tty/vcc.c pr_err("VCC: TTY driver registration failed\n"); pr_err 1119 drivers/tty/vcc.c pr_err("VCC: TTY init failed\n"); pr_err 1125 drivers/tty/vcc.c pr_err("VCC: VIO driver registration failed\n"); pr_err 645 drivers/tty/vt/keyboard.c pr_err("k_lowercase was called - impossible\n"); pr_err 748 drivers/tty/vt/keyboard.c pr_err("k_fn called with value=%d\n", value); pr_err 1074 drivers/tty/vt/keyboard.c pr_err("error %d while registering trigger %s\n", pr_err 2603 drivers/tty/vt/vt.c pr_err("vt: argh, driver_data is NULL !\n"); pr_err 1895 drivers/usb/cdns3/gadget.c pr_err("usbss: invalid parameters\n"); pr_err 171 drivers/usb/class/usbtmc.c pr_err("can not find device for minor %d", iminor(inode)); pr_err 244 drivers/usb/common/common.c pr_err("%pOF: unsupported otg-rev: 0x%x\n", pr_err 921 drivers/usb/core/hcd.c pr_err("%s: failed to get bus number\n", usbcore_name); pr_err 5565 drivers/usb/core/hub.c pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name); pr_err 4415 drivers/usb/dwc2/gadget.c pr_err("%s: called with no device\n", __func__); pr_err 237 drivers/usb/dwc2/hcd_ddma.c pr_err("hsotg = %p\n", hsotg); pr_err 551 drivers/usb/gadget/configfs.c pr_err("Unable to locate . in FUNC.INSTANCE\n"); pr_err 645 drivers/usb/gadget/configfs.c pr_err("Unable to locate . in name.bConfigurationValue\n"); pr_err 1262 drivers/usb/gadget/configfs.c pr_err("Need at least one configuration in %s.\n", pr_err 1273 drivers/usb/gadget/configfs.c pr_err("Config %s/%d of %s needs at least one function.\n", pr_err 752 drivers/usb/gadget/function/f_fs.c pr_err("functionfs read size %d > requested size %zd, dropping excess data. " pr_err 1676 drivers/usb/gadget/function/f_fs.c pr_err("failed registering file system (%d)\n", ret); pr_err 1976 drivers/usb/gadget/function/f_fs.c pr_err("%s: config_ep_by_speed(%s) returned %d\n", pr_err 2850 drivers/usb/gadget/function/f_fs.c pr_err("two %sspeed descriptors for EP %d\n", pr_err 2753 drivers/usb/gadget/function/f_mass_storage.c pr_err("no file given for LUN%d\n", id); pr_err 2908 drivers/usb/gadget/function/f_mass_storage.c pr_err("There should be at least one LUN.\n"); pr_err 3153 drivers/usb/gadget/function/f_mass_storage.c pr_err("Unable to locate . in LUN.NUMBER\n"); pr_err 1472 drivers/usb/gadget/function/f_printer.c pr_err("unable to create usb_gadget class %d\n", status); pr_err 1478 drivers/usb/gadget/function/f_printer.c pr_err("alloc_chrdev_region %d\n", status); pr_err 457 drivers/usb/gadget/function/f_rndis.c pr_err("RNDIS command error %d, %d/%d\n", pr_err 66 drivers/usb/gadget/function/f_tcm.c pr_err("ERR %s(%d)\n", __func__, __LINE__); pr_err 86 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret); pr_err 95 drivers/usb/gadget/function/f_tcm.c pr_err("ERR %s(%d)\n", __func__, __LINE__); pr_err 170 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret); pr_err 197 drivers/usb/gadget/function/f_tcm.c pr_err("ERR %s(%d)\n", __func__, __LINE__); pr_err 237 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d)\n", __func__, __LINE__); pr_err 280 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d)\n", __func__, __LINE__); pr_err 302 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d): %d\n", __func__, __LINE__, ret); pr_err 358 drivers/usb/gadget/function/f_tcm.c pr_err("BOT: endpoint setup failed\n"); pr_err 441 drivers/usb/gadget/function/f_tcm.c pr_err("No LUNs configured?\n"); pr_err 580 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); pr_err 589 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); pr_err 597 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); pr_err 645 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); pr_err 665 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d) => %d\n", __func__, __LINE__, ret); pr_err 691 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d)\n", __func__, __LINE__); pr_err 708 drivers/usb/gadget/function/f_tcm.c pr_err("%s(%d)\n", __func__, __LINE__); pr_err 837 drivers/usb/gadget/function/f_tcm.c pr_err("UASP: endpoint setup failed\n"); pr_err 958 drivers/usb/gadget/function/f_tcm.c pr_err("%s() state %d transfer failed\n", __func__, cmd->state); pr_err 1103 drivers/usb/gadget/function/f_tcm.c pr_err("Unsupported type %d\n", cmd_iu->iu_id); pr_err 1109 drivers/usb/gadget/function/f_tcm.c pr_err("Missing nexus, ignoring command\n"); pr_err 1120 drivers/usb/gadget/function/f_tcm.c pr_err("usbg_get_cmd failed\n"); pr_err 1209 drivers/usb/gadget/function/f_tcm.c pr_err("Wrong signature on CBW\n"); pr_err 1213 drivers/usb/gadget/function/f_tcm.c pr_err("Wrong length for CBW\n"); pr_err 1223 drivers/usb/gadget/function/f_tcm.c pr_err("Missing nexus, ignoring command\n"); pr_err 1229 drivers/usb/gadget/function/f_tcm.c pr_err("usbg_get_cmd failed\n"); pr_err 1618 drivers/usb/gadget/function/f_tcm.c pr_err(MSG, atomic_read(&tpg->tpg_port_count)); pr_err 1653 drivers/usb/gadget/function/f_tcm.c pr_err(NEXUS_STORE_MSG, page, USBG_NAMELEN); pr_err 1661 drivers/usb/gadget/function/f_tcm.c pr_err("Missing 'naa.' prefix\n"); pr_err 2064 drivers/usb/gadget/function/f_tcm.c pr_err("Can't claim all required eps\n"); pr_err 31 drivers/usb/gadget/function/storage_common.h #define LERROR(lun, fmt, args...) _LMSG(pr_err, lun, fmt, ## args) pr_err 952 drivers/usb/gadget/function/u_serial.c pr_err("%s: port num [%d] is not support console\n", pr_err 1048 drivers/usb/gadget/function/u_serial.c pr_err("%s: allocate console buffer failed\n", __func__); pr_err 1055 drivers/usb/gadget/function/u_serial.c pr_err("%s: cannot create console thread\n", __func__); pr_err 1240 drivers/usb/gadget/function/u_serial.c pr_err("%s: failed to register tty for port %d, err %ld\n", pr_err 1290 drivers/usb/gadget/function/u_serial.c pr_err("serial line %d not allocated.\n", port_num); pr_err 1294 drivers/usb/gadget/function/u_serial.c pr_err("serial line %d is in use.\n", port_num); pr_err 1432 drivers/usb/gadget/function/u_serial.c pr_err("%s: cannot register, err %d\n", pr_err 1658 drivers/usb/gadget/legacy/inode.c pr_err("%s expected %s controller not %s\n", pr_err 173 drivers/usb/gadget/udc/at91_udc.h #define ERR(stuff...) pr_err("udc: " stuff) pr_err 1419 drivers/usb/gadget/udc/atmel_usba_udc.c pr_err("udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, " pr_err 1490 drivers/usb/gadget/udc/atmel_usba_udc.c pr_err("udc: %s: TXCOMP: Invalid endpoint state %d, " pr_err 1519 drivers/usb/gadget/udc/atmel_usba_udc.c pr_err("udc: %s: RXRDY: Invalid endpoint state %d, " pr_err 34 drivers/usb/gadget/udc/bdc/bdc_pci.c pr_err("failed to allocate MSI entry\n"); pr_err 1605 drivers/usb/gadget/udc/core.c pr_err("failed to create udc class --> %ld\n", pr_err 2745 drivers/usb/gadget/udc/dummy_hcd.c pr_err("Number of emulated UDC must be in range of 1...%d\n", pr_err 356 drivers/usb/gadget/udc/fotg210-udc.c pr_err("dma_mapping_error\n"); pr_err 626 drivers/usb/gadget/udc/fotg210-udc.c pr_err("request error!!\n"); pr_err 806 drivers/usb/gadget/udc/fotg210-udc.c pr_err("%s : empty queue\n", __func__); pr_err 1086 drivers/usb/gadget/udc/fotg210-udc.c pr_err("platform_get_resource error.\n"); pr_err 1092 drivers/usb/gadget/udc/fotg210-udc.c pr_err("platform_get_resource IORESOURCE_IRQ error.\n"); pr_err 1112 drivers/usb/gadget/udc/fotg210-udc.c pr_err("ioremap error.\n"); pr_err 1170 drivers/usb/gadget/udc/fotg210-udc.c pr_err("request_irq error (%d)\n", ret); pr_err 552 drivers/usb/gadget/udc/fsl_usb2_udc.h #define ERR(stuff...) pr_err("udc: " stuff) pr_err 94 drivers/usb/gadget/udc/fusb300_udc.c pr_err("fifo entry is over the maximum number!\n"); pr_err 297 drivers/usb/gadget/udc/fusb300_udc.c pr_err("can't enable_fifo_int ep0\n"); pr_err 312 drivers/usb/gadget/udc/fusb300_udc.c pr_err("can't disable_fifo_int ep0\n"); pr_err 1024 drivers/usb/gadget/udc/fusb300_udc.c pr_err("%s : empty queue\n", __func__); pr_err 1371 drivers/usb/gadget/udc/fusb300_udc.c pr_err("platform_get_resource error.\n"); pr_err 1394 drivers/usb/gadget/udc/fusb300_udc.c pr_err("ioremap error.\n"); pr_err 1427 drivers/usb/gadget/udc/fusb300_udc.c pr_err("request_irq error (%d)\n", ret); pr_err 1434 drivers/usb/gadget/udc/fusb300_udc.c pr_err("request_irq1 error (%d)\n", ret); pr_err 113 drivers/usb/gadget/udc/m66592-udc.c pr_err("unexpect pipe num (%d)\n", pipenum); pr_err 129 drivers/usb/gadget/udc/m66592-udc.c pr_err("unexpect pipe num (%d)\n", pipenum); pr_err 158 drivers/usb/gadget/udc/m66592-udc.c pr_err("unexpect pipe num (%d)\n", pipenum); pr_err 175 drivers/usb/gadget/udc/m66592-udc.c pr_err("unexpect pipe num(%d)\n", pipenum); pr_err 267 drivers/usb/gadget/udc/m66592-udc.c pr_err("m66592 pipe memory is insufficient\n"); pr_err 296 drivers/usb/gadget/udc/m66592-udc.c pr_err("ep_release: unexpect pipenum (%d)\n", pr_err 398 drivers/usb/gadget/udc/m66592-udc.c pr_err("bulk pipe is insufficient\n"); pr_err 414 drivers/usb/gadget/udc/m66592-udc.c pr_err("interrupt pipe is insufficient\n"); pr_err 423 drivers/usb/gadget/udc/m66592-udc.c pr_err("isochronous pipe is insufficient\n"); pr_err 431 drivers/usb/gadget/udc/m66592-udc.c pr_err("unexpect xfer type\n"); pr_err 446 drivers/usb/gadget/udc/m66592-udc.c pr_err("pipe_buffer_setting fail\n"); pr_err 582 drivers/usb/gadget/udc/m66592-udc.c pr_err("start_ep0: unexpect ctsq(%x)\n", ctsq); pr_err 756 drivers/usb/gadget/udc/m66592-udc.c pr_err("pipe0 is busy. maybe cpu i/o bus " pr_err 806 drivers/usb/gadget/udc/m66592-udc.c pr_err("write fifo not ready. pipnum=%d\n", pipenum); pr_err 855 drivers/usb/gadget/udc/m66592-udc.c pr_err("read fifo not ready"); pr_err 1130 drivers/usb/gadget/udc/m66592-udc.c pr_err("USB speed unknown\n"); pr_err 1189 drivers/usb/gadget/udc/m66592-udc.c pr_err("ctrl_stage: unexpect ctsq(%x)\n", ctsq); pr_err 1550 drivers/usb/gadget/udc/m66592-udc.c pr_err("platform_get_resource error.\n"); pr_err 1565 drivers/usb/gadget/udc/m66592-udc.c pr_err("ioremap error.\n"); pr_err 1598 drivers/usb/gadget/udc/m66592-udc.c pr_err("request_irq error (%d)\n", ret); pr_err 195 drivers/usb/gadget/udc/net2280.c pr_err("%s: failed at line=%d\n", __func__, __LINE__); pr_err 520 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p\n", __func__, _ep); pr_err 553 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep\n", __func__); pr_err 999 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); pr_err 1251 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n", pr_err 1336 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); pr_err 1396 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep); pr_err 1409 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); pr_err 1435 drivers/usb/gadget/udc/net2280.c pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); pr_err 190 drivers/usb/gadget/udc/omap_udc.h #define ERR(stuff...) pr_err("udc: " stuff) pr_err 1047 drivers/usb/gadget/udc/pch_udc.c pr_err("%s: Invalid address\n", __func__); pr_err 1377 drivers/usb/gadget/udc/pch_udc.c pr_err("%s: gpio port %d is invalid\n", pr_err 1384 drivers/usb/gadget/udc/pch_udc.c pr_err("%s: can't request gpio port %d, err: %d\n", pr_err 1403 drivers/usb/gadget/udc/pch_udc.c pr_err("%s: can't request irq %d, err: %d\n", pr_err 1606 drivers/usb/gadget/udc/pch_udc.c pr_err("%s: could not create DMA chain:%d\n", __func__, retval); pr_err 2331 drivers/usb/gadget/udc/pxa25x_udc.c pr_err("%s: not XScale!\n", driver_name); pr_err 2360 drivers/usb/gadget/udc/pxa25x_udc.c pr_err("%s: unrecognized processor: %08x\n", pr_err 2416 drivers/usb/gadget/udc/pxa25x_udc.c pr_err("%s: can't get irq %d, err %d\n", pr_err 2428 drivers/usb/gadget/udc/pxa25x_udc.c pr_err("%s: can't get irq %i, err %d\n", pr_err 2436 drivers/usb/gadget/udc/pxa25x_udc.c pr_err("%s: can't get irq %i, err %d\n", pr_err 245 drivers/usb/gadget/udc/pxa25x_udc.h #define ERR(stuff...) pr_err("udc: " stuff) pr_err 357 drivers/usb/gadget/udc/r8a66597-udc.c pr_err("r8a66597 pipe memory is insufficient\n"); pr_err 216 drivers/usb/host/ehci-tegra.c pr_err("%s: timeout waiting for SUSPEND\n", __func__); pr_err 263 drivers/usb/host/ehci-tegra.c pr_err("%s: timeout waiting for RESUME\n", __func__); pr_err 265 drivers/usb/host/ehci-tegra.c pr_err("%s: timeout waiting for SUSPEND\n", __func__); pr_err 199 drivers/usb/host/isp1362-hcd.c pr_err("%s: %s len %d/%d num_ptds %d buf_map %08lx skip_map %08lx\n", __func__, pr_err 230 drivers/usb/host/isp1362-hcd.c pr_err("%s: ep %p req %d len %d %s PTD[%d] $%04x num_ptds %d buf_count %d buf_avail %d buf_map %08lx skip_map %08lx\n", pr_err 321 drivers/usb/host/isp1362-hcd.c pr_err("%s@%d: ep->nextpid %02x\n", __func__, __LINE__, ep->nextpid); pr_err 380 drivers/usb/host/isp1362-hcd.c pr_err("%s: ep %p PTD $%04x act_len %d ep->length %d\n", __func__, ep, pr_err 515 drivers/usb/host/isp1362-hcd.c pr_err("%s: req %d PTD %p Untouched by ISP1362\n", __func__, pr_err 574 drivers/usb/host/isp1362-hcd.c pr_err("%s: count=%d len=%d\n", __func__, pr_err 898 drivers/usb/host/isp1362-hcd.c pr_err("%s: Not enough ISO buffer space for %d byte PTD\n", pr_err 1137 drivers/usb/host/isp1362-hcd.c pr_err("Unrecoverable error\n"); pr_err 1172 drivers/usb/host/isp1362-hcd.c pr_err("%s: Unserviced interrupt(s) %04x\n", __func__, svc_mask); pr_err 1197 drivers/usb/host/isp1362-hcd.c pr_err("%s: new load %d load[%02x] %d max %d\n", __func__, pr_err 1234 drivers/usb/host/isp1362-hcd.c pr_err("Isochronous transfers not supported\n"); pr_err 1330 drivers/usb/host/isp1362-hcd.c pr_err("%s: balance returned %d\n", __func__, retval); pr_err 1812 drivers/usb/host/isp1362-hcd.c pr_err("%s: controller won't suspend %08x\n", __func__, pr_err 2192 drivers/usb/host/isp1362-hcd.c pr_err("Software reset timeout\n"); pr_err 2348 drivers/usb/host/isp1362-hcd.c pr_err("Clock not ready after %lums\n", timeout); pr_err 2414 drivers/usb/host/isp1362-hcd.c pr_err("%s: memory check with %d byte offset %d failed\n", pr_err 2429 drivers/usb/host/isp1362-hcd.c pr_err("%s: memory check failed\n", __func__); pr_err 2445 drivers/usb/host/isp1362-hcd.c pr_err("%s: Failed to clear buffer\n", __func__); pr_err 2465 drivers/usb/host/isp1362-hcd.c pr_err("%s: memory check with offset %02x failed\n", pr_err 2495 drivers/usb/host/isp1362-hcd.c pr_err("%s: Invalid chip ID %04x\n", __func__, chipid); pr_err 442 drivers/usb/host/ohci-pxa27x.c pr_err("no resource of IORESOURCE_IRQ"); pr_err 241 drivers/usb/misc/adutux.c pr_err("%s - error, can't find device for minor %d\n", pr_err 361 drivers/usb/misc/adutux.c pr_err("No device or device unplugged %d\n", retval); pr_err 525 drivers/usb/misc/adutux.c pr_err("No device or device unplugged %d\n", retval); pr_err 622 drivers/usb/misc/ftdi-elan.c pr_err("can't find device for minor %d\n", subminor); pr_err 2766 drivers/usb/misc/ftdi-elan.c pr_err("usb_register failed. Error number %d\n", result); pr_err 609 drivers/usb/misc/iowarrior.c pr_err("%s - error, can't find device for minor %d\n", pr_err 329 drivers/usb/misc/legousbtower.c pr_err("error, can't find device for minor %d\n", subminor); pr_err 554 drivers/usb/misc/legousbtower.c pr_err("No device or device unplugged %d\n", retval); pr_err 640 drivers/usb/misc/legousbtower.c pr_err("No device or device unplugged %d\n", retval); pr_err 439 drivers/usb/misc/usb3503.c pr_err("usb3503: Failed to register I2C driver: %d\n", err); pr_err 443 drivers/usb/misc/usb3503.c pr_err("usb3503: Failed to register platform driver: %d\n", pr_err 87 drivers/usb/misc/usblcd.c pr_err("USBLCD: %s - error, can't find device for minor %d\n", pr_err 1502 drivers/usb/musb/musb_core.c pr_err("%s: kernel must blacklist external hubs\n", pr_err 128 drivers/usb/musb/omap2430.c pr_err("%s: musb core is not yet initialized\n", __func__); pr_err 134 drivers/usb/musb/omap2430.c pr_err("%s: musb core is not yet ready\n", __func__); pr_err 150 drivers/usb/musb/ux500.c pr_err("HS USB OTG: no transceiver configured\n"); pr_err 157 drivers/usb/phy/phy-ulpi.c pr_err("ULPI integrity check: failed!"); pr_err 112 drivers/usb/serial/console.c pr_err("No USB device connected to ttyUSB%i\n", co->index); pr_err 992 drivers/usb/serial/digi_acceleport.c pr_err("%s: port or port->private is NULL, status=%d\n", pr_err 1219 drivers/usb/serial/usb-serial.c pr_err("%s - registering bus driver failed\n", __func__); pr_err 1239 drivers/usb/serial/usb-serial.c pr_err("%s - tty_register_driver failed\n", __func__); pr_err 1246 drivers/usb/serial/usb-serial.c pr_err("%s - registering generic driver failed\n", __func__); pr_err 1259 drivers/usb/serial/usb-serial.c pr_err("%s - returning with error %d\n", __func__, result); pr_err 1331 drivers/usb/serial/usb-serial.c pr_err("problem %d when registering driver %s\n", retval, driver->description); pr_err 94 drivers/usb/usb-skeleton.c pr_err("%s - error, can't find device for minor %d\n", pr_err 374 drivers/usb/usbip/stub_main.c pr_err("kmem_cache_create failed\n"); pr_err 380 drivers/usb/usbip/stub_main.c pr_err("usb_register failed %d\n", ret); pr_err 387 drivers/usb/usbip/stub_main.c pr_err("driver_create_file failed\n"); pr_err 394 drivers/usb/usbip/stub_main.c pr_err("driver_create_file failed\n"); pr_err 295 drivers/usb/usbip/usbip_common.c pr_err("unknown command\n"); pr_err 409 drivers/usb/usbip/usbip_common.c pr_err("unknown command\n"); pr_err 515 drivers/usb/usbip/usbip_common.c pr_err("unknown command\n"); pr_err 130 drivers/usb/usbip/usbip_event.c pr_err("failed to create usbip_event\n"); pr_err 348 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 370 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 376 drivers/usb/usbip/vhci_hcd.c pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not " pr_err 408 drivers/usb/usbip/vhci_hcd.c pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n"); pr_err 433 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 477 drivers/usb/usbip/vhci_hcd.c pr_err("vhci_device speed not set\n"); pr_err 499 drivers/usb/usbip/vhci_hcd.c pr_err("USB_PORT_FEAT_LINK_STATE req not " pr_err 517 drivers/usb/usbip/vhci_hcd.c pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not " pr_err 527 drivers/usb/usbip/vhci_hcd.c pr_err("USB_PORT_FEAT_SUSPEND req not " pr_err 533 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 543 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 555 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 560 drivers/usb/usbip/vhci_hcd.c pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " pr_err 569 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 593 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", wIndex); pr_err 611 drivers/usb/usbip/vhci_hcd.c pr_err("GetPortErrorCount req not " pr_err 621 drivers/usb/usbip/vhci_hcd.c pr_err("SetHubDepth req not supported for " pr_err 627 drivers/usb/usbip/vhci_hcd.c pr_err("default hub control req: %04x v%04x i%04x l%d\n", pr_err 695 drivers/usb/usbip/vhci_hcd.c pr_err("invalid port number %d\n", portnum); pr_err 1190 drivers/usb/usbip/vhci_hcd.c pr_err("invalid vhci name %s\n", hcd_name(hcd)); pr_err 1341 drivers/usb/usbip/vhci_hcd.c pr_err("create primary hcd failed\n"); pr_err 1352 drivers/usb/usbip/vhci_hcd.c pr_err("usb_add_hcd hs failed %d\n", ret); pr_err 1360 drivers/usb/usbip/vhci_hcd.c pr_err("create shared hcd failed\n"); pr_err 1366 drivers/usb/usbip/vhci_hcd.c pr_err("usb_add_hcd ss failed %d\n", ret); pr_err 69 drivers/usb/usbip/vhci_rx.c pr_err("cannot find a urb of seqnum %u max seqnum %d\n", pr_err 229 drivers/usb/usbip/vhci_rx.c pr_err("received pdu size is %d, should be %d\n", ret, pr_err 249 drivers/usb/usbip/vhci_rx.c pr_err("unknown pdu %u\n", pdu.base.command); pr_err 193 drivers/usb/usbip/vhci_sysfs.c pr_err("not connected %d\n", vdev->ud.status); pr_err 214 drivers/usb/usbip/vhci_sysfs.c pr_err("pdev %u\n", *pdev_nr); pr_err 220 drivers/usb/usbip/vhci_sysfs.c pr_err("rhport %u\n", *rhport); pr_err 283 drivers/usb/usbip/vhci_sysfs.c pr_err("Failed attach request for unsupported USB speed: %s\n", pr_err 142 drivers/usb/usbip/vhci_tx.c pr_err("sendmsg failed!, ret=%d for %zd\n", ret, pr_err 221 drivers/usb/usbip/vhci_tx.c pr_err("sendmsg failed!, ret=%d for %zd\n", ret, pr_err 41 drivers/usb/usbip/vudc_main.c pr_err("Number of emulated UDC must be no less than 1"); pr_err 220 drivers/usb/usbip/vudc_rx.c pr_err("rx: unknown command"); pr_err 99 drivers/vfio/mdev/mdev_sysfs.c pr_err("%s: Type name empty!\n", __func__); pr_err 2193 drivers/vfio/vfio.c pr_err("vfio: misc device register failed\n"); pr_err 319 drivers/vfio/vfio_iommu_spapr_tce.c pr_err("tce_vfio: Wrong IOMMU type\n"); pr_err 527 drivers/vfio/vfio_iommu_spapr_tce.c pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n", pr_err 584 drivers/vfio/vfio_iommu_spapr_tce.c pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n", pr_err 557 drivers/vhost/scsi.c pr_err("Faulted on virtio_scsi_cmd_resp\n"); pr_err 582 drivers/vhost/scsi.c pr_err("Unable to locate active struct vhost_scsi_nexus\n"); pr_err 589 drivers/vhost/scsi.c pr_err("Unable to obtain tag for vhost_scsi_cmd\n"); pr_err 656 drivers/vhost/scsi.c pr_err("%s: iter->iov is NULL, but expected bytes: %zu" pr_err 663 drivers/vhost/scsi.c pr_err("%s: requested sgl_count: %d exceeds pre-allocated" pr_err 809 drivers/vhost/scsi.c pr_err("Faulted on virtio_scsi_cmd_resp\n"); pr_err 1145 drivers/vhost/scsi.c pr_err("Faulted on virtio_scsi_ctrl_tmf_resp\n"); pr_err 1167 drivers/vhost/scsi.c pr_err("Faulted on virtio_scsi_ctrl_an_resp\n"); pr_err 1882 drivers/vhost/scsi.c pr_err("kstrtoul() returned %d for fabric_prot_type\n", ret); pr_err 1886 drivers/vhost/scsi.c pr_err("Invalid vhost_scsi fabric_prot_type: %lu\n", val); pr_err 1924 drivers/vhost/scsi.c pr_err("Unable to allocate tv_cmd->tvc_sgl\n"); pr_err 1932 drivers/vhost/scsi.c pr_err("Unable to allocate tv_cmd->tvc_upages\n"); pr_err 1940 drivers/vhost/scsi.c pr_err("Unable to allocate tv_cmd->tvc_prot_sgl\n"); pr_err 1965 drivers/vhost/scsi.c pr_err("Unable to allocate struct vhost_scsi_nexus\n"); pr_err 2010 drivers/vhost/scsi.c pr_err("Unable to remove TCM_vhost I_T Nexus with" pr_err 2018 drivers/vhost/scsi.c pr_err("Unable to remove TCM_vhost I_T Nexus with" pr_err 2083 drivers/vhost/scsi.c pr_err("Emulated NAA Sas Address: %s, exceeds" pr_err 2092 drivers/vhost/scsi.c pr_err("Passed SAS Initiator Port %s does not" pr_err 2103 drivers/vhost/scsi.c pr_err("Passed FCP Initiator Port %s does not" pr_err 2114 drivers/vhost/scsi.c pr_err("Passed iSCSI Initiator Port %s does not" pr_err 2122 drivers/vhost/scsi.c pr_err("Unable to locate prefix for emulated Initiator Port:" pr_err 2163 drivers/vhost/scsi.c pr_err("Unable to allocate struct vhost_scsi_tpg"); pr_err 2217 drivers/vhost/scsi.c pr_err("Unable to allocate struct vhost_scsi_tport"); pr_err 2242 drivers/vhost/scsi.c pr_err("Unable to locate prefix for emulated Target Port:" pr_err 2249 drivers/vhost/scsi.c pr_err("Emulated %s Address: %s, exceeds" pr_err 146 drivers/video/backlight/apple_bl.c pr_err("unable to find PCI host\n"); pr_err 158 drivers/video/backlight/apple_bl.c pr_err("unknown hardware\n"); pr_err 171 drivers/video/backlight/cr_bllcd.c pr_err("INTEL CARILLO RANCH LPC not found.\n"); pr_err 177 drivers/video/backlight/cr_bllcd.c pr_err("Carillo Ranch GPIO device was not enabled.\n"); pr_err 101 drivers/video/console/sticore.c pr_err("STI init_graph failed (ret %d, errno %d)\n", ret, err); pr_err 565 drivers/video/fbdev/amba-clcd.c pr_err("%pOF: problems parsing panel-timing (%d)\n", node, err); pr_err 3520 drivers/video/fbdev/amifb.c pr_err("amifb: No Chip RAM for frame buffer"); pr_err 1497 drivers/video/fbdev/core/fbmem.c pr_err("%s: enable CONFIG_FB_BIG_ENDIAN to " pr_err 1501 drivers/video/fbdev/core/fbmem.c pr_err("%s: enable CONFIG_FB_LITTLE_ENDIAN to " pr_err 295 drivers/video/fbdev/da8xx-fb.c pr_err("LCD Controller timed out\n"); pr_err 460 drivers/video/fbdev/efifb.c pr_err("efifb: video memory @ 0x%lx spans multiple EFI memory regions\n", pr_err 489 drivers/video/fbdev/efifb.c pr_err("efifb: abort, cannot remap video memory 0x%x @ 0x%lx\n", pr_err 564 drivers/video/fbdev/efifb.c pr_err("efifb: cannot add sysfs attrs\n"); pr_err 569 drivers/video/fbdev/efifb.c pr_err("efifb: cannot allocate colormap\n"); pr_err 574 drivers/video/fbdev/efifb.c pr_err("efifb: cannot register framebuffer\n"); pr_err 967 drivers/video/fbdev/fsl-diu-fb.c pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel); pr_err 1924 drivers/video/fbdev/fsl-diu-fb.c pr_err("fsl-diu-fb: can't find 'cpu' device node\n"); pr_err 1930 drivers/video/fbdev/fsl-diu-fb.c pr_err("fsl-diu-fb: missing 'd-cache-size' property' " pr_err 1948 drivers/video/fbdev/fsl-diu-fb.c pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' " pr_err 1966 drivers/video/fbdev/fsl-diu-fb.c pr_err("fsl-diu-fb: failed to register platform driver\n"); pr_err 144 drivers/video/fbdev/goldfishfb.c pr_err("%s: timeout waiting for base update\n", __func__); pr_err 246 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to send packet via vmbus\n"); pr_err 421 drivers/video/fbdev/hyperv_fb.c pr_err("Time out on waiting version response\n"); pr_err 446 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to open vmbus channel\n"); pr_err 458 drivers/video/fbdev/hyperv_fb.c pr_err("Synthetic video device version not accepted\n"); pr_err 497 drivers/video/fbdev/hyperv_fb.c pr_err("Time out on waiting vram location ack\n"); pr_err 502 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to set VRAM location\n"); pr_err 651 drivers/video/fbdev/hyperv_fb.c pr_err("Screen option is invalid: skipped\n"); pr_err 660 drivers/video/fbdev/hyperv_fb.c pr_err("Screen resolution option is out of range: skipped\n"); pr_err 687 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to find PCI Hyper-V video\n"); pr_err 702 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to allocate framebuffer memory\n"); pr_err 778 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to connect to VSP\n"); pr_err 784 drivers/video/fbdev/hyperv_fb.c pr_err("No memory for framebuffer\n"); pr_err 833 drivers/video/fbdev/hyperv_fb.c pr_err("Unable to register framebuffer\n"); pr_err 642 drivers/video/fbdev/macfb.c pr_err("macfb: unknown or unsupported bit depth: %d\n", pr_err 27 drivers/video/fbdev/omap/lcd_h3.c pr_err(MODULE_NAME ": Unable to turn on LCD panel\n"); pr_err 41 drivers/video/fbdev/omap/lcd_h3.c pr_err(MODULE_NAME ": Unable to turn off LCD panel\n"); pr_err 24 drivers/video/fbdev/omap/lcd_inn1610.c pr_err(MODULE_NAME ": can't request GPIO 14\n"); pr_err 29 drivers/video/fbdev/omap/lcd_inn1610.c pr_err(MODULE_NAME ": can't request GPIO 15\n"); pr_err 97 drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c pr_err("error in spi_write %x\n", data); pr_err 547 drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c pr_err("%s sdi enable failed\n", __func__); pr_err 294 drivers/video/fbdev/omap2/omapfb/vrfb.c pr_err("vrfb: no free contexts\n"); pr_err 310 drivers/video/fbdev/omap2/omapfb/vrfb.c pr_err("vrfb: failed to reserve VRFB " pr_err 1267 drivers/video/fbdev/pxafb.c pr_err("%s: not properly initialized, thread terminated\n", pr_err 1311 drivers/video/fbdev/pxafb.c pr_err("%s: unable to create kernel thread\n", __func__); pr_err 1456 drivers/video/fbdev/pxafb.c pr_err("%s: Failed to prepare clock\n", __func__); pr_err 490 drivers/video/fbdev/smscufx.c pr_err("DDR2 initialisation timed out, reg 0x0000=0x%08x", tmp); pr_err 1431 drivers/video/fbdev/smscufx.c pr_err("ufx_i2c_configure failed"); pr_err 1518 drivers/video/fbdev/smscufx.c pr_err("Unable to get valid EDID from device/display\n"); pr_err 1523 drivers/video/fbdev/smscufx.c pr_err("Using previously queried EDID\n"); pr_err 1535 drivers/video/fbdev/smscufx.c pr_err("Using default/backup EDID\n"); pr_err 1787 drivers/video/fbdev/smscufx.c pr_err("%s - nonzero write bulk status received: %d\n", pr_err 1943 drivers/video/fbdev/smscufx.c pr_err("usb_submit_urb error %x\n", ret); pr_err 364 drivers/video/fbdev/tmiofb.c pr_err("tmiofb: timeout waiting for %d\n", pr_err 374 drivers/video/fbdev/tmiofb.c pr_err("tmiofb: timeout waiting for %d\n", ccs); pr_err 205 drivers/video/fbdev/uvesafb.c pr_err("failed to execute %s\n", v86d_path); pr_err 206 drivers/video/fbdev/uvesafb.c pr_err("make sure that the v86d helper is installed and executable\n"); pr_err 430 drivers/video/fbdev/uvesafb.c pr_err("Getting VBE info block failed (eax=0x%x, err=%d)\n", pr_err 436 drivers/video/fbdev/uvesafb.c pr_err("Sorry, pre-VBE 2.0 cards are not supported\n"); pr_err 441 drivers/video/fbdev/uvesafb.c pr_err("Missing mode list!\n"); pr_err 1292 drivers/video/fbdev/uvesafb.c pr_err("mode switch failed (eax=0x%x, err=%d)\n", pr_err 1692 drivers/video/fbdev/uvesafb.c pr_err("vbe_init() failed with %d\n", err); pr_err 1714 drivers/video/fbdev/uvesafb.c pr_err("request region 0x3c0-0x3e0 failed\n"); pr_err 1721 drivers/video/fbdev/uvesafb.c pr_err("cannot reserve video memory at 0x%lx\n", pr_err 1731 drivers/video/fbdev/uvesafb.c pr_err("abort, cannot ioremap 0x%x bytes of video memory at 0x%lx\n", pr_err 1740 drivers/video/fbdev/uvesafb.c pr_err("failed to register framebuffer device\n"); pr_err 354 drivers/video/fbdev/vt8500lcdfb.c pr_err("%s: Failed to allocate framebuffer\n", __func__); pr_err 332 drivers/video/fbdev/wm8505fb.c pr_err("%s: Failed to allocate framebuffer\n", __func__); pr_err 33 drivers/video/of_display_timing.c pr_err("%pOF: could not find property %s\n", np, name); pr_err 45 drivers/video/of_display_timing.c pr_err("%pOF: illegal timing specification in %s\n", np, name); pr_err 105 drivers/video/of_display_timing.c pr_err("%pOF: error reading timing properties\n", np); pr_err 155 drivers/video/of_display_timing.c pr_err("%pOF: could not find display-timings node\n", np); pr_err 161 drivers/video/of_display_timing.c pr_err("%pOF: could not allocate struct disp'\n", np); pr_err 171 drivers/video/of_display_timing.c pr_err("%pOF: no timing specifications given\n", np); pr_err 182 drivers/video/of_display_timing.c pr_err("%pOF: no timings specified\n", np); pr_err 190 drivers/video/of_display_timing.c pr_err("%pOF: could not allocate timings array\n", np); pr_err 203 drivers/video/of_display_timing.c pr_err("%pOF: could not allocate display_timing struct\n", pr_err 214 drivers/video/of_display_timing.c pr_err("%pOF: error in timing %d\n", pr_err 38 drivers/video/of_videomode.c pr_err("%pOF: no timings specified\n", np); pr_err 667 drivers/virt/fsl_hypervisor.c pr_err("fsl-hv: out of memory\n"); pr_err 833 drivers/virt/fsl_hypervisor.c pr_err("fsl-hv: cannot register device\n"); pr_err 847 drivers/virt/fsl_hypervisor.c pr_err("fsl-hv: no 'interrupts' property in %pOF node\n", pr_err 875 drivers/virt/fsl_hypervisor.c pr_err("fsl-hv: node %pOF has missing or " pr_err 887 drivers/virt/fsl_hypervisor.c pr_err("fsl-hv: could not request irq %u for node %pOF\n", pr_err 60 drivers/virt/vboxguest/vboxguest_utils.c VBG_LOG(vbg_err, pr_err); pr_err 672 drivers/virtio/virtio_mmio.c pr_err("Failed to register parent device!\n"); pr_err 187 drivers/vme/bridges/vme_fake.c pr_err("Invalid address space\n"); pr_err 198 drivers/vme/bridges/vme_fake.c pr_err("Invalid VME base alignment\n"); pr_err 202 drivers/vme/bridges/vme_fake.c pr_err("Invalid VME bound alignment\n"); pr_err 266 drivers/vme/bridges/vme_fake.c pr_err("Invalid VME Window alignment\n"); pr_err 272 drivers/vme/bridges/vme_fake.c pr_err("Invalid size alignment\n"); pr_err 278 drivers/vme/bridges/vme_fake.c pr_err("Size must be non-zero for enabled windows\n"); pr_err 290 drivers/vme/bridges/vme_fake.c pr_err("Invalid data width\n"); pr_err 308 drivers/vme/bridges/vme_fake.c pr_err("Invalid address space\n"); pr_err 873 drivers/vme/bridges/vme_fake.c pr_err("Location monitor callback attached, can't reset\n"); pr_err 886 drivers/vme/bridges/vme_fake.c pr_err("Invalid address space\n"); pr_err 940 drivers/vme/bridges/vme_fake.c pr_err("Location monitor not properly configured\n"); pr_err 947 drivers/vme/bridges/vme_fake.c pr_err("Existing callback attached\n"); pr_err 1193 drivers/vme/bridges/vme_fake.c pr_err("CR/CSR configuration failed.\n"); pr_err 1199 drivers/vme/bridges/vme_fake.c pr_err("Chip Registration failed.\n"); pr_err 805 drivers/vme/vme.c pr_err("Not a master resource\n"); pr_err 814 drivers/vme/vme.c pr_err("Map size cannot exceed the window size\n"); pr_err 1782 drivers/vme/vme.c pr_err("Can't find VME bus\n"); pr_err 226 drivers/w1/masters/ds2482.c pr_err("%s: timeout on channel %d\n", pr_err 175 drivers/w1/masters/ds2490.c pr_err("Failed to send command control message %x.%x: err=%d.\n", pr_err 190 drivers/w1/masters/ds2490.c pr_err("Failed to send mode control message %x.%x: err=%d.\n", pr_err 205 drivers/w1/masters/ds2490.c pr_err("Failed to send control message %x.%x: err=%d.\n", pr_err 286 drivers/w1/masters/ds2490.c pr_err("Failed to read 1-wire data from 0x%x: err=%d.\n", pr_err 307 drivers/w1/masters/ds2490.c pr_err("ds_reset_device: Error allowing strong pullup\n"); pr_err 313 drivers/w1/masters/ds2490.c pr_err("ds_reset_device: Error setting duration\n"); pr_err 360 drivers/w1/masters/ds2490.c pr_err("Failed to write 1-wire data to ep0x%x: " pr_err 1189 drivers/w1/w1.c pr_err("Failed to register bus. err=%d.\n", retval); pr_err 1195 drivers/w1/w1.c pr_err("Failed to register master driver. err=%d.\n", pr_err 1202 drivers/w1/w1.c pr_err("Failed to register slave driver. err=%d.\n", pr_err 36 drivers/w1/w1_int.c pr_err("Failed to allocate %zd bytes for new w1 device.\n", pr_err 76 drivers/w1/w1_int.c pr_err("Failed to register master device. err=%d\n", err); pr_err 104 drivers/w1/w1_int.c pr_err("w1_add_master_device: invalid function set\n"); pr_err 239 drivers/w1/w1_int.c pr_err("Device doesn't exist.\n"); pr_err 244 drivers/watchdog/acquirewdt.c pr_err("I/O address 0x%04x already in use\n", wdt_stop); pr_err 251 drivers/watchdog/acquirewdt.c pr_err("I/O address 0x%04x already in use\n", wdt_start); pr_err 257 drivers/watchdog/acquirewdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 243 drivers/watchdog/advantechwdt.c pr_err("I/O address 0x%04x already in use\n", pr_err 251 drivers/watchdog/advantechwdt.c pr_err("I/O address 0x%04x already in use\n", wdt_start); pr_err 265 drivers/watchdog/advantechwdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 407 drivers/watchdog/alim1535_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 413 drivers/watchdog/alim1535_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 404 drivers/watchdog/alim7101_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 410 drivers/watchdog/alim7101_wdt.c pr_err("cannot register restart handler (err=%d)\n", rc); pr_err 416 drivers/watchdog/alim7101_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 83 drivers/watchdog/ar7_wdt.c pr_err("failed to unlock WDT kick reg\n"); pr_err 96 drivers/watchdog/ar7_wdt.c pr_err("failed to unlock WDT prescale reg\n"); pr_err 109 drivers/watchdog/ar7_wdt.c pr_err("failed to unlock WDT change reg\n"); pr_err 125 drivers/watchdog/ar7_wdt.c pr_err("failed to unlock WDT disable reg\n"); pr_err 276 drivers/watchdog/ar7_wdt.c pr_err("could not get vbus clock\n"); pr_err 286 drivers/watchdog/ar7_wdt.c pr_err("unable to register misc device\n"); pr_err 217 drivers/watchdog/cpu5wdt.c pr_err("request_region failed\n"); pr_err 230 drivers/watchdog/cpu5wdt.c pr_err("misc_register failed\n"); pr_err 390 drivers/watchdog/cpwd.c pr_err("Cannot register IRQ %d\n", p->irq); pr_err 536 drivers/watchdog/cpwd.c pr_err("Unable to map registers\n"); pr_err 543 drivers/watchdog/cpwd.c pr_err("Unable to find /options node\n"); pr_err 590 drivers/watchdog/cpwd.c pr_err("Could not register misc device for dev %d\n", pr_err 144 drivers/watchdog/diag288_wdt.c pr_err("The watchdog cannot be activated\n"); pr_err 196 drivers/watchdog/diag288_wdt.c pr_err("The watchdog timer cannot be started or reset\n"); pr_err 238 drivers/watchdog/diag288_wdt.c pr_err("Linux cannot be suspended while the watchdog is in use\n"); pr_err 281 drivers/watchdog/diag288_wdt.c pr_err("The watchdog cannot be initialized\n"); pr_err 286 drivers/watchdog/diag288_wdt.c pr_err("The watchdog cannot be initialized\n"); pr_err 292 drivers/watchdog/diag288_wdt.c pr_err("The watchdog cannot be deactivated\n"); pr_err 144 drivers/watchdog/eurotechwdt.c pr_err("invalid irq number\n"); pr_err 428 drivers/watchdog/eurotechwdt.c pr_err("IRQ %d is not free\n", irq); pr_err 433 drivers/watchdog/eurotechwdt.c pr_err("IO %X is not free\n", io); pr_err 440 drivers/watchdog/eurotechwdt.c pr_err("can't register reboot notifier (err=%d)\n", ret); pr_err 446 drivers/watchdog/eurotechwdt.c pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR); pr_err 198 drivers/watchdog/f71808e_wdt.c pr_err("I/O address 0x%04x already in use\n", (int)base); pr_err 225 drivers/watchdog/f71808e_wdt.c pr_err("watchdog timeout out of range\n"); pr_err 267 drivers/watchdog/f71808e_wdt.c pr_err("pulse width out of range\n"); pr_err 324 drivers/watchdog/f71808e_wdt.c pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin); pr_err 723 drivers/watchdog/f71808e_wdt.c pr_err("cannot register miscdev on minor=%d\n", pr_err 731 drivers/watchdog/f71808e_wdt.c pr_err("starting timeout out of range\n"); pr_err 738 drivers/watchdog/f71808e_wdt.c pr_err("cannot start watchdog timer\n"); pr_err 220 drivers/watchdog/geodewdt.c pr_err("No timers were available\n"); pr_err 269 drivers/watchdog/iTCO_wdt.c pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); pr_err 471 drivers/watchdog/iTCO_wdt.c pr_err("I/O address 0x%04llx already in use, device disabled\n", pr_err 477 drivers/watchdog/iTCO_wdt.c pr_err("SMI I/O resource is missing\n"); pr_err 520 drivers/watchdog/iTCO_wdt.c pr_err("I/O address 0x%04llx already in use, device disabled\n", pr_err 573 drivers/watchdog/iTCO_wdt.c pr_err("cannot register watchdog device (err=%d)\n", ret); pr_err 282 drivers/watchdog/ib700wdt.c pr_err("STOP method I/O %X is not available\n", WDT_STOP); pr_err 289 drivers/watchdog/ib700wdt.c pr_err("START method I/O %X is not available\n", WDT_START); pr_err 303 drivers/watchdog/ib700wdt.c pr_err("failed to register misc device\n"); pr_err 237 drivers/watchdog/ibmasr.c pr_err("address %#x already in use\n", asr_base); pr_err 394 drivers/watchdog/ibmasr.c pr_err("failed to register misc device\n"); pr_err 297 drivers/watchdog/ie6xx_wdt.c pr_err("Watchdog timer: value of timeout %d (dec) " pr_err 175 drivers/watchdog/indydog.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 181 drivers/watchdog/indydog.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 129 drivers/watchdog/intel_scu_watchdog.c pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret); pr_err 250 drivers/watchdog/intel_scu_watchdog.c pr_err("Unable to set timer\n"); pr_err 438 drivers/watchdog/intel_scu_watchdog.c pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n", pr_err 494 drivers/watchdog/intel_scu_watchdog.c pr_err("cannot register notifier %d)\n", ret); pr_err 504 drivers/watchdog/intel_scu_watchdog.c pr_err("cannot register miscdev %d err =%d\n", pr_err 514 drivers/watchdog/intel_scu_watchdog.c pr_err("error requesting irq %d\n", ret); pr_err 373 drivers/watchdog/it8712f_wdt.c pr_err("Device not activated, skipping\n"); pr_err 379 drivers/watchdog/it8712f_wdt.c pr_err("Base address not set, skipping\n"); pr_err 415 drivers/watchdog/it8712f_wdt.c pr_err("unable to disable watchdog timer\n"); pr_err 421 drivers/watchdog/it8712f_wdt.c pr_err("unable to register reboot notifier\n"); pr_err 427 drivers/watchdog/it8712f_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 300 drivers/watchdog/it87_wdt.c pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", pr_err 304 drivers/watchdog/it87_wdt.c pr_err("no device\n"); pr_err 307 drivers/watchdog/it87_wdt.c pr_err("Unknown Chip found, Chip %04x Revision %04x\n", pr_err 336 drivers/watchdog/it87_wdt.c pr_err("Cannot register watchdog device (err=%d)\n", rc); pr_err 189 drivers/watchdog/ixp4xx_wdt.c pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n"); pr_err 340 drivers/watchdog/machzwd.c pr_err("device file closed unexpectedly. Will not stop the WDT!\n"); pr_err 410 drivers/watchdog/machzwd.c pr_err("cannot reserve I/O ports at %d\n", ZF_IOBASE); pr_err 417 drivers/watchdog/machzwd.c pr_err("can't register reboot notifier (err=%d)\n", ret); pr_err 423 drivers/watchdog/machzwd.c pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR); pr_err 155 drivers/watchdog/mixcomwd.c pr_err("release called while internal timer alive\n"); pr_err 271 drivers/watchdog/mixcomwd.c pr_err("No card detected, or port not available\n"); pr_err 277 drivers/watchdog/mixcomwd.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 111 drivers/watchdog/moxart_wdt.c pr_err("%s: of_clk_get failed\n", __func__); pr_err 117 drivers/watchdog/moxart_wdt.c pr_err("%s: incorrect clock frequency\n", __func__); pr_err 326 drivers/watchdog/nv_tco.c pr_err("failed to get tcobase address\n"); pr_err 333 drivers/watchdog/nv_tco.c pr_err("I/O address 0x%04x already in use\n", tcobase); pr_err 349 drivers/watchdog/nv_tco.c pr_err("I/O address 0x%04x already in use\n", pr_err 359 drivers/watchdog/nv_tco.c pr_err("Could not disable SMI caused by TCO\n"); pr_err 369 drivers/watchdog/nv_tco.c pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); pr_err 407 drivers/watchdog/nv_tco.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 526 drivers/watchdog/octeon-wdt-main.c pr_err("Error: Cannot allocate boot vector.\n"); pr_err 564 drivers/watchdog/octeon-wdt-main.c pr_err("watchdog_register_device() failed: %d\n", ret); pr_err 512 drivers/watchdog/pc87413_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 516 drivers/watchdog/pc87413_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 527 drivers/watchdog/pc87413_wdt.c pr_err("cannot request SWC region at 0x%x\n", swc_base_addr); pr_err 863 drivers/watchdog/pcwd.c pr_err("This driver only supports 1 device\n"); pr_err 868 drivers/watchdog/pcwd.c pr_err("No I/O-Address for card detected\n"); pr_err 880 drivers/watchdog/pcwd.c pr_err("I/O address 0x%04x already in use\n", pr_err 923 drivers/watchdog/pcwd.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 931 drivers/watchdog/pcwd.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 271 drivers/watchdog/pcwd_pci.c pr_err("Card timer not enabled\n"); pr_err 296 drivers/watchdog/pcwd_pci.c pr_err("Card did not acknowledge disable attempt\n"); pr_err 570 drivers/watchdog/pcwd_pci.c pr_err("Attempt to open already opened device\n"); pr_err 691 drivers/watchdog/pcwd_pci.c pr_err("This driver only supports 1 device\n"); pr_err 696 drivers/watchdog/pcwd_pci.c pr_err("Not possible to enable PCI Device\n"); pr_err 701 drivers/watchdog/pcwd_pci.c pr_err("No I/O-Address for card detected\n"); pr_err 711 drivers/watchdog/pcwd_pci.c pr_err("I/O address 0x%04x already in use\n", pr_err 747 drivers/watchdog/pcwd_pci.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 754 drivers/watchdog/pcwd_pci.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 762 drivers/watchdog/pcwd_pci.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 203 drivers/watchdog/pcwd_usb.c pr_err("can't resubmit intr, usb_submit_urb failed with result %d\n", pr_err 275 drivers/watchdog/pcwd_usb.c pr_err("Card did not acknowledge enable attempt\n"); pr_err 293 drivers/watchdog/pcwd_usb.c pr_err("Card did not acknowledge disable attempt\n"); pr_err 615 drivers/watchdog/pcwd_usb.c pr_err("This driver only supports 1 device\n"); pr_err 624 drivers/watchdog/pcwd_usb.c pr_err("The device isn't a Human Interface Device\n"); pr_err 636 drivers/watchdog/pcwd_usb.c pr_err("Couldn't find an INTR & IN endpoint\n"); pr_err 661 drivers/watchdog/pcwd_usb.c pr_err("Out of memory\n"); pr_err 679 drivers/watchdog/pcwd_usb.c pr_err("Problem registering interrupt URB\n"); pr_err 723 drivers/watchdog/pcwd_usb.c pr_err("cannot register reboot notifier (err=%d)\n", retval); pr_err 729 drivers/watchdog/pcwd_usb.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 736 drivers/watchdog/pcwd_usb.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 234 drivers/watchdog/pika_wdt.c pr_err("Unable to find fpga\n"); pr_err 241 drivers/watchdog/pika_wdt.c pr_err("Unable to map fpga\n"); pr_err 250 drivers/watchdog/pika_wdt.c pr_err("Unable to find fpga-sd\n"); pr_err 258 drivers/watchdog/pika_wdt.c pr_err("Unable to map fpga-sd\n"); pr_err 277 drivers/watchdog/pika_wdt.c pr_err("Unable to register miscdev\n"); pr_err 245 drivers/watchdog/pnx833x_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 251 drivers/watchdog/pnx833x_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 76 drivers/watchdog/rc32434_wdt.c pr_err("timeout value must be between 0 and %d\n", max_to); pr_err 265 drivers/watchdog/rc32434_wdt.c pr_err("failed to retrieve resources\n"); pr_err 271 drivers/watchdog/rc32434_wdt.c pr_err("failed to remap I/O resources\n"); pr_err 290 drivers/watchdog/rc32434_wdt.c pr_err("failed to register watchdog device\n"); pr_err 194 drivers/watchdog/riowd.c pr_err("Cannot map registers\n"); pr_err 202 drivers/watchdog/riowd.c pr_err("Cannot register watchdog misc device\n"); pr_err 163 drivers/watchdog/sa1100_wdt.c pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n", pr_err 170 drivers/watchdog/sa1100_wdt.c pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n", pr_err 296 drivers/watchdog/sb_wdog.c pr_err("%s: cannot register reboot notifier (err=%d)\n", pr_err 308 drivers/watchdog/sb_wdog.c pr_err("%s: failed to request irq 1 - %d\n", pr_err 336 drivers/watchdog/sbc60xxwdt.c pr_err("I/O address 0x%04x already in use\n", wdt_start); pr_err 344 drivers/watchdog/sbc60xxwdt.c pr_err("I/O address 0x%04x already in use\n", wdt_stop); pr_err 352 drivers/watchdog/sbc60xxwdt.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 358 drivers/watchdog/sbc60xxwdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 74 drivers/watchdog/sbc7240_wdt.c pr_err("timeout value must be 1<=x<=%d\n", SBC7240_MAX_TIMEOUT); pr_err 252 drivers/watchdog/sbc7240_wdt.c pr_err("I/O address 0x%04x already in use\n", pr_err 272 drivers/watchdog/sbc7240_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 278 drivers/watchdog/sbc7240_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 331 drivers/watchdog/sbc8360.c pr_err("Invalid timeout index (must be 0-63)\n"); pr_err 337 drivers/watchdog/sbc8360.c pr_err("ENABLE method I/O %X is not available\n", pr_err 343 drivers/watchdog/sbc8360.c pr_err("BASETIME method I/O %X is not available\n", pr_err 351 drivers/watchdog/sbc8360.c pr_err("Failed to register reboot notifier\n"); pr_err 357 drivers/watchdog/sbc8360.c pr_err("failed to register misc device\n"); pr_err 182 drivers/watchdog/sbc_epx_c3.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 188 drivers/watchdog/sbc_epx_c3.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 212 drivers/watchdog/sbc_fitpc2_wdt.c pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT); pr_err 217 drivers/watchdog/sbc_fitpc2_wdt.c pr_err("I/O address 0x%04x already in use\n", DATA_PORT); pr_err 223 drivers/watchdog/sbc_fitpc2_wdt.c pr_err("margin must be in range 31 - 255 seconds, you tried to set %d\n", pr_err 231 drivers/watchdog/sbc_fitpc2_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 358 drivers/watchdog/sc1200wdt.c pr_err("Unable to register IO port %#x\n", io); pr_err 399 drivers/watchdog/sc1200wdt.c pr_err("io parameter must be specified\n"); pr_err 413 drivers/watchdog/sc1200wdt.c pr_err("Unable to register IO port %#x\n", io); pr_err 424 drivers/watchdog/sc1200wdt.c pr_err("Unable to register reboot notifier err = %d\n", ret); pr_err 430 drivers/watchdog/sc1200wdt.c pr_err("Unable to register miscdev on minor %d\n", pr_err 393 drivers/watchdog/sc520_wdt.c pr_err("Unable to remap memory\n"); pr_err 400 drivers/watchdog/sc520_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 406 drivers/watchdog/sc520_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 484 drivers/watchdog/sch311x_wdt.c pr_err("Base address not set\n"); pr_err 236 drivers/watchdog/scx200_wdt.c pr_err("unable to register reboot notifier\n"); pr_err 534 drivers/watchdog/smsc37b787_wdt.c pr_err("Unable to register IO port %#x\n", IOPORT); pr_err 548 drivers/watchdog/smsc37b787_wdt.c pr_err("Unable to register reboot notifier err = %d\n", ret); pr_err 554 drivers/watchdog/smsc37b787_wdt.c pr_err("Unable to register miscdev on minor %d\n", pr_err 425 drivers/watchdog/w83627hf_wdt.c pr_err("Unsupported chip ID: 0x%02x\n", val); pr_err 508 drivers/watchdog/w83627hf_wdt.c pr_err("failed to initialize watchdog (err=%d)\n", ret); pr_err 359 drivers/watchdog/w83877f_wdt.c pr_err("I/O address 0x%04x already in use\n", pr_err 366 drivers/watchdog/w83877f_wdt.c pr_err("I/O address 0x%04x already in use\n", WDT_PING); pr_err 373 drivers/watchdog/w83877f_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 379 drivers/watchdog/w83877f_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 480 drivers/watchdog/w83977f_wdt.c pr_err("I/O address 0x%04x already in use\n", IO_INDEX_PORT); pr_err 487 drivers/watchdog/w83977f_wdt.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 493 drivers/watchdog/w83977f_wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 266 drivers/watchdog/wafer5823wdt.c pr_err("I/O address 0x%04x already in use\n", wdt_stop); pr_err 273 drivers/watchdog/wafer5823wdt.c pr_err("I/O address 0x%04x already in use\n", wdt_start); pr_err 280 drivers/watchdog/wafer5823wdt.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 286 drivers/watchdog/wafer5823wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 126 drivers/watchdog/watchdog_core.c pr_err("%s: driver supplied timeout (%u) out of range\n", pr_err 138 drivers/watchdog/watchdog_core.c pr_err("%s: DT supplied timeout (%u) out of range\n", dev_str, t); pr_err 262 drivers/watchdog/watchdog_core.c pr_err("watchdog%d: Cannot register reboot notifier (%d)\n", pr_err 308 drivers/watchdog/watchdog_core.c pr_err("%s: failed to register watchdog device (err = %d)\n", pr_err 986 drivers/watchdog/watchdog_dev.c pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n", pr_err 989 drivers/watchdog/watchdog_dev.c pr_err("%s: a legacy watchdog module is probably present.\n", pr_err 1012 drivers/watchdog/watchdog_dev.c pr_err("watchdog%d unable to add device %d:%d\n", pr_err 1131 drivers/watchdog/watchdog_dev.c pr_err("Failed to create watchdog kworker\n"); pr_err 1138 drivers/watchdog/watchdog_dev.c pr_err("couldn't register class\n"); pr_err 1144 drivers/watchdog/watchdog_dev.c pr_err("watchdog: unable to allocate char dev region\n"); pr_err 83 drivers/watchdog/wdrtas.c pr_err("setting the watchdog to %i timeout failed: %li\n", pr_err 166 drivers/watchdog/wdrtas.c pr_err("event-scan failed: %li\n", result); pr_err 527 drivers/watchdog/wdrtas.c pr_err("couldn't get token for set-indicator. Terminating watchdog code.\n"); pr_err 533 drivers/watchdog/wdrtas.c pr_err("couldn't get token for event-scan. Terminating watchdog code.\n"); pr_err 567 drivers/watchdog/wdrtas.c pr_err("couldn't register watchdog misc device. Terminating watchdog code.\n"); pr_err 598 drivers/watchdog/wdrtas.c pr_err("could not register reboot notifier. Terminating watchdog code.\n"); pr_err 592 drivers/watchdog/wdt.c pr_err("unknown card type '%d'\n", type); pr_err 605 drivers/watchdog/wdt.c pr_err("I/O address 0x%04x already in use\n", io); pr_err 612 drivers/watchdog/wdt.c pr_err("IRQ %d is not free\n", irq); pr_err 618 drivers/watchdog/wdt.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 625 drivers/watchdog/wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 633 drivers/watchdog/wdt.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 458 drivers/watchdog/wdt977.c pr_err("I/O address 0x%04x already in use\n", pr_err 467 drivers/watchdog/wdt977.c pr_err("cannot register reboot notifier (err=%d)\n", rc); pr_err 473 drivers/watchdog/wdt977.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 610 drivers/watchdog/wdt_pci.c pr_err("This driver only supports one device\n"); pr_err 615 drivers/watchdog/wdt_pci.c pr_err("unknown card type '%d'\n", type); pr_err 620 drivers/watchdog/wdt_pci.c pr_err("Not possible to enable PCI Device\n"); pr_err 625 drivers/watchdog/wdt_pci.c pr_err("No I/O-Address for card detected\n"); pr_err 631 drivers/watchdog/wdt_pci.c pr_err("I/O address 0x%llx already in use\n", pr_err 641 drivers/watchdog/wdt_pci.c pr_err("IRQ %d is not free\n", irq); pr_err 658 drivers/watchdog/wdt_pci.c pr_err("cannot register reboot notifier (err=%d)\n", ret); pr_err 665 drivers/watchdog/wdt_pci.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 673 drivers/watchdog/wdt_pci.c pr_err("cannot register miscdev on minor=%d (err=%d)\n", pr_err 145 drivers/watchdog/wm8350_wdt.c pr_err("No driver data supplied\n"); pr_err 265 drivers/xen/balloon.c pr_err("Cannot allocate new System RAM resource\n"); pr_err 276 drivers/xen/balloon.c pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n", pr_err 43 drivers/xen/cpu_hotplug.c pr_err("Unable to read cpu state\n"); pr_err 52 drivers/xen/cpu_hotplug.c pr_err("unknown state(%s) on CPU%d\n", state, cpu); pr_err 550 drivers/xen/events/events_base.c pr_err("irq%d: Failed to set port to irq mapping (%d)\n", irq, rc); pr_err 1658 drivers/xen/events/events_base.c pr_err("Request for Xen HVM callback vector failed\n"); pr_err 184 drivers/xen/events/events_fifo.c pr_err("unable to expand event array (%d)\n", ret); pr_err 717 drivers/xen/evtchn.c pr_err("Could not register /dev/xen/evtchn\n"); pr_err 514 drivers/xen/gntalloc.c pr_err("%s: Mapping must be shared\n", __func__); pr_err 591 drivers/xen/gntalloc.c pr_err("Could not register misc gntalloc device\n"); pr_err 1203 drivers/xen/gntdev.c pr_err("Could not register gntdev device\n"); pr_err 953 drivers/xen/grant-table.c pr_err("%s: %s eagain grant\n", func, current->comm); pr_err 71 drivers/xen/manage.c pr_err("%s: system core suspend failed: %d\n", __func__, err); pr_err 106 drivers/xen/manage.c pr_err("%s: freeze processes failed %d\n", __func__, err); pr_err 112 drivers/xen/manage.c pr_err("%s: freeze kernel threads failed %d\n", __func__, err); pr_err 118 drivers/xen/manage.c pr_err("%s: dpm_suspend_start %d\n", __func__, err); pr_err 127 drivers/xen/manage.c pr_err("dpm_suspend_end failed: %d\n", err); pr_err 147 drivers/xen/manage.c pr_err("failed to start xen_suspend: %d\n", err); pr_err 289 drivers/xen/manage.c pr_err("Error %d reading sysrq code in control/sysrq\n", pr_err 298 drivers/xen/manage.c pr_err("%s: Error %d writing sysrq in control/sysrq\n", pr_err 337 drivers/xen/manage.c pr_err("Failed to set shutdown watcher\n"); pr_err 345 drivers/xen/manage.c pr_err("Failed to set sysrq watcher\n"); pr_err 357 drivers/xen/manage.c pr_err("%s: Error %d writing %s\n", __func__, pr_err 296 drivers/xen/mcelog.c pr_err("Failed to fetch %surgent error log\n", pr_err 312 drivers/xen/mcelog.c pr_err("Failed to ack previous error log\n"); pr_err 331 drivers/xen/mcelog.c pr_err("Failed to handle urgent mc_info queue, continue handling nonurgent mc_info queue anyway\n"); pr_err 336 drivers/xen/mcelog.c pr_err("Failed to handle nonurgent mc_info queue\n"); pr_err 363 drivers/xen/mcelog.c pr_err("Failed to get CPU numbers\n"); pr_err 376 drivers/xen/mcelog.c pr_err("Failed to get CPU info\n"); pr_err 384 drivers/xen/mcelog.c pr_err("Failed to bind virq\n"); pr_err 981 drivers/xen/privcmd.c pr_err("Could not register Xen privcmd device\n"); pr_err 987 drivers/xen/privcmd.c pr_err("Could not register Xen hypercall-buf device\n"); pr_err 267 drivers/xen/swiotlb-xen.c pr_err("%s (rc:%d)\n", xen_swiotlb_error(m_ret), rc); pr_err 45 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Evaluating processor object\n"); pr_err 55 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Evaluating processor _UID\n"); pr_err 67 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Hotadd CPU (acpi_id = %d) failed.\n", pr_err 94 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Error when enabling Xen processor\n"); pr_err 182 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Failed to get apic_id for acpi_id %d\n", pr_err 189 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Failed to get _PXM for acpi_id %d\n", pr_err 201 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Failed to hotadd CPU for acpi_id %d\n", pr_err 259 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Unable to add the device\n"); pr_err 265 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Missing device object\n"); pr_err 276 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Device don't exist, dropping EJECT\n"); pr_err 281 drivers/xen/xen-acpi-cpuhotplug.c pr_err(PREFIX "Driver data is NULL, dropping EJECT\n"); pr_err 50 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Xen Hotplug Memory Add failed on " pr_err 185 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "driver data not found\n"); pr_err 239 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Cannot find driver data\n"); pr_err 253 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Device doesn't exist\n"); pr_err 259 drivers/xen/xen-acpi-memhotplug.c pr_err(PREFIX "Driver Data is NULL\n"); pr_err 127 drivers/xen/xen-acpi-processor.c pr_err("(CX): Hypervisor error (%d) for ACPI CPU%u\n", pr_err 119 drivers/xen/xen-balloon.c pr_err("Failed to set balloon watcher\n"); pr_err 417 drivers/xen/xen-pciback/conf_space_header.c pr_err("%s: Unsupported header type %d!\n", pr_err 1547 drivers/xen/xen-pciback/pci_stub.c pr_err("Error parsing pci_devs_to_hide at \"%s\"\n", pr_err 263 drivers/xen/xen-scsiback.c pr_err("[%s:%d] cmnd[0]=%02x -> st=%02x msg=%02x host=%02x drv=%02x\n", pr_err 429 drivers/xen/xen-scsiback.c pr_err("invalid buffer -- could not remap it\n"); pr_err 451 drivers/xen/xen-scsiback.c pr_err("no grant page\n"); pr_err 661 drivers/xen/xen-scsiback.c pr_err("Unable to obtain tag for vscsiif_request\n"); pr_err 906 drivers/xen/xen-scsiback.c pr_err("illegal format of physical device %s\n", phy); pr_err 913 drivers/xen/xen-scsiback.c pr_err("lun number not valid: %s\n", lunp); pr_err 943 drivers/xen/xen-scsiback.c pr_err("%s:%llu %s\n", phy, unpacked_lun, error); pr_err 1028 drivers/xen/xen-scsiback.c pr_err("xenbus_printf error %s\n", state); pr_err 1046 drivers/xen/xen-scsiback.c pr_err("xenbus_printf error %s\n", state); pr_err 1120 drivers/xen/xen-scsiback.c pr_err("xenbus_printf error %s\n", str); pr_err 1349 drivers/xen/xen-scsiback.c pr_err("Unable to locate prefix for emulated Target Port: %s\n", name); pr_err 1355 drivers/xen/xen-scsiback.c pr_err("Emulated %s Address: %s, exceeds max: %d\n", name, pr_err 1479 drivers/xen/xen-scsiback.c pr_err("param alias: %s, exceeds max: %d\n", page, pr_err 1565 drivers/xen/xen-scsiback.c pr_err("Unable to remove xen-pvscsi I_T Nexus with active TPG port count: %d\n", pr_err 1572 drivers/xen/xen-scsiback.c pr_err("Unable to remove xen-pvscsi I_T Nexus with active TPG frontend count: %d\n", pr_err 1635 drivers/xen/xen-scsiback.c pr_err("Emulated NAA Sas Address: %s, exceeds max: %d\n", pr_err 1644 drivers/xen/xen-scsiback.c pr_err("Passed SAS Initiator Port %s does not match target port protoid: %s\n", pr_err 1654 drivers/xen/xen-scsiback.c pr_err("Passed FCP Initiator Port %s does not match target port protoid: %s\n", pr_err 1664 drivers/xen/xen-scsiback.c pr_err("Passed iSCSI Initiator Port %s does not match target port protoid: %s\n", pr_err 1671 drivers/xen/xen-scsiback.c pr_err("Unable to locate prefix for emulated Initiator Port: %s\n", pr_err 1872 drivers/xen/xen-scsiback.c pr_err("%s: error %d\n", __func__, ret); pr_err 451 drivers/xen/xenbus/xenbus_comms.c pr_err("request ring is not quiescent (%08x:%08x)!\n", pr_err 471 drivers/xen/xenbus/xenbus_comms.c pr_err("request irq failed %i\n", err); pr_err 131 drivers/xen/xenbus/xenbus_dev_backend.c pr_err("Could not register xenbus backend device\n"); pr_err 722 drivers/xen/xenbus/xenbus_dev_frontend.c pr_err("Could not register xenbus frontend device\n"); pr_err 151 drivers/zorro/zorro.c pr_err("Zorro: Error registering zorro_bus\n"); pr_err 697 fs/9p/v9fs.c pr_err("Failed to register v9fs for caching\n"); pr_err 703 fs/9p/v9fs.c pr_err("Failed to register with sysfs\n"); pr_err 708 fs/9p/v9fs.c pr_err("Failed to register filesystem\n"); pr_err 270 fs/affs/bitmap.c pr_err("Bitmap allocation failed\n"); pr_err 284 fs/affs/bitmap.c pr_err("Cannot read bitmap\n"); pr_err 306 fs/affs/bitmap.c pr_err("Cannot read bitmap extension\n"); pr_err 376 fs/affs/super.c pr_err("Error parsing options\n"); pr_err 444 fs/affs/super.c pr_err("No valid root block on device %s\n", sb->s_id); pr_err 456 fs/affs/super.c pr_err("Cannot read boot block\n"); pr_err 505 fs/affs/super.c pr_err("Unknown filesystem on device %s: %08X\n", pr_err 543 fs/affs/super.c pr_err("AFFS: Get root inode failed\n"); pr_err 266 fs/afs/addr_list.c pr_err("Failed to parse DNS data %ld\n", PTR_ERR(vllist)); pr_err 113 fs/afs/mntpt.c pr_err("kAFS: unable to lookup cell '%pd'\n", mntpt); pr_err 566 fs/afs/rxrpc.c pr_err("kAFS: Call %u in bad state %u\n", pr_err 299 fs/afs/super.c pr_err("kAFS: unable to lookup cell '%*.*s'\n", pr_err 152 fs/afs/yfsclient.c pr_err("kAFS: %s: Request buffer overflow (%zu>%u)\n", pr_err 726 fs/autofs/dev-ioctl.c pr_err("misc_register failed for control device\n"); pr_err 283 fs/autofs/inode.c pr_err("called with bogus options\n"); pr_err 290 fs/autofs/inode.c pr_err("kernel does not match daemon version " pr_err 307 fs/autofs/inode.c pr_err("could not find process group %d\n", pr_err 326 fs/autofs/inode.c pr_err("could not open pipe file descriptor\n"); pr_err 345 fs/autofs/inode.c pr_err("pipe file descriptor does not contain proper ops\n"); pr_err 37 fs/befs/debug.c pr_err("(%s): %pV\n", sb->s_id, &vaf); pr_err 726 fs/befs/linuxvfs.c pr_err("Invalid uid %d, " pr_err 740 fs/befs/linuxvfs.c pr_err("Invalid gid %d, " pr_err 751 fs/befs/linuxvfs.c pr_err("allocation failure for " pr_err 760 fs/befs/linuxvfs.c pr_err("Unrecognized mount option \"%s\" " pr_err 331 fs/binfmt_flat.c pr_err("reference 0x%lx to shared library %d", r, id); pr_err 336 fs/binfmt_flat.c pr_err("reloc address 0x%lx not in same module " pr_err 341 fs/binfmt_flat.c pr_err("failed to load library %d", id); pr_err 347 fs/binfmt_flat.c pr_err("library %d is younger than %d", id, curid); pr_err 361 fs/binfmt_flat.c pr_err("reloc outside program 0x%lx (0 - 0x%lx/0x%lx)", pr_err 414 fs/binfmt_flat.c pr_err("Unknown relocation type=%x\n", r.reloc.type); pr_err 472 fs/binfmt_flat.c pr_err("bad flat file version 0x%x (supported 0x%lx and 0x%lx)\n", pr_err 480 fs/binfmt_flat.c pr_err("shared libraries are not available before rev 0x%lx\n", pr_err 496 fs/binfmt_flat.c pr_err("bad flat file version 0x%x (supported 0x%lx)\n", pr_err 509 fs/binfmt_flat.c pr_err("bad header\n"); pr_err 516 fs/binfmt_flat.c pr_err("Support for ZFLAT executables is not enabled.\n"); pr_err 570 fs/binfmt_flat.c pr_err("Unable to mmap process text, errno %d\n", ret); pr_err 583 fs/binfmt_flat.c pr_err("Unable to allocate RAM for process data, " pr_err 606 fs/binfmt_flat.c pr_err("Unable to read data+bss, errno %d\n", ret); pr_err 627 fs/binfmt_flat.c pr_err("Unable to allocate RAM for process text/data, " pr_err 707 fs/binfmt_flat.c pr_err("Unable to read code+data+bss, errno %d\n", ret); pr_err 3114 fs/btrfs/ctree.h pr_err("assertion failed: %s, in %s:%d\n", expr, file, line); pr_err 70 fs/btrfs/extent_io.c pr_err("BTRFS: state leak: start %llu end %llu state %u in tree %d refs %d\n", pr_err 80 fs/btrfs/extent_io.c pr_err("BTRFS: buffer leak start %llu len %lu refs %d bflags %lu\n", pr_err 13 fs/btrfs/tests/btrfs-tests.h #define test_err(fmt, ...) pr_err("BTRFS: selftest: %s:%d " fmt "\n", \ pr_err 815 fs/btrfs/volumes.c pr_err( pr_err 50 fs/cachefiles/bind.c pr_err("'bind' command doesn't take an argument\n"); pr_err 55 fs/cachefiles/bind.c pr_err("No cache directory specified\n"); pr_err 61 fs/cachefiles/bind.c pr_err("Cache already bound\n"); pr_err 248 fs/cachefiles/bind.c pr_err("Failed to register: %d\n", ret); pr_err 315 fs/cachefiles/daemon.c pr_err("Free space limits must be in range 0%%<=stop<cull<run<100%%\n"); pr_err 475 fs/cachefiles/daemon.c pr_err("Empty directory specified\n"); pr_err 480 fs/cachefiles/daemon.c pr_err("Second cache directory specified\n"); pr_err 503 fs/cachefiles/daemon.c pr_err("Empty security context specified\n"); pr_err 508 fs/cachefiles/daemon.c pr_err("Second security context specified\n"); pr_err 531 fs/cachefiles/daemon.c pr_err("Empty tag specified\n"); pr_err 562 fs/cachefiles/daemon.c pr_err("cull applied to unready cache\n"); pr_err 567 fs/cachefiles/daemon.c pr_err("cull applied to dead cache\n"); pr_err 587 fs/cachefiles/daemon.c pr_err("cull command requires dirfd to be a directory\n"); pr_err 591 fs/cachefiles/daemon.c pr_err("cull command requires dirfd and filename\n"); pr_err 614 fs/cachefiles/daemon.c pr_err("debug command requires mask\n"); pr_err 634 fs/cachefiles/daemon.c pr_err("inuse applied to unready cache\n"); pr_err 639 fs/cachefiles/daemon.c pr_err("inuse applied to dead cache\n"); pr_err 659 fs/cachefiles/daemon.c pr_err("inuse command requires dirfd to be a directory\n"); pr_err 663 fs/cachefiles/daemon.c pr_err("inuse command requires dirfd and filename\n"); pr_err 261 fs/cachefiles/internal.h pr_err("I/O Error: " FMT"\n", ##__VA_ARGS__); \ pr_err 322 fs/cachefiles/internal.h pr_err("\n"); \ pr_err 323 fs/cachefiles/internal.h pr_err("Assertion failed\n"); \ pr_err 331 fs/cachefiles/internal.h pr_err("\n"); \ pr_err 332 fs/cachefiles/internal.h pr_err("Assertion failed\n"); \ pr_err 333 fs/cachefiles/internal.h pr_err("%lx " #OP " %lx is false\n", \ pr_err 342 fs/cachefiles/internal.h pr_err("\n"); \ pr_err 343 fs/cachefiles/internal.h pr_err("Assertion failed\n"); \ pr_err 351 fs/cachefiles/internal.h pr_err("\n"); \ pr_err 352 fs/cachefiles/internal.h pr_err("Assertion failed\n"); \ pr_err 353 fs/cachefiles/internal.h pr_err("%lx " #OP " %lx is false\n", \ pr_err 84 fs/cachefiles/main.c pr_err("failed to register: %d\n", ret); pr_err 34 fs/cachefiles/namei.c pr_err("%sobject: OBJ%x\n", prefix, object->fscache.debug_id); pr_err 35 fs/cachefiles/namei.c pr_err("%sobjstate=%s fl=%lx wbusy=%x ev=%lx[%lx]\n", pr_err 39 fs/cachefiles/namei.c pr_err("%sops=%u inp=%u exc=%u\n", pr_err 42 fs/cachefiles/namei.c pr_err("%sparent=%p\n", pr_err 48 fs/cachefiles/namei.c pr_err("%scookie=%p [pr=%p nd=%p fl=%lx]\n", pr_err 54 fs/cachefiles/namei.c pr_err("%skey=[%u] '", prefix, cookie->key_len); pr_err 61 fs/cachefiles/namei.c pr_err("%scookie=NULL\n", prefix); pr_err 121 fs/cachefiles/namei.c pr_err("\n"); pr_err 122 fs/cachefiles/namei.c pr_err("Error: Can't preemptively bury live object\n"); pr_err 152 fs/cachefiles/namei.c pr_err("Error: Object already active\n"); pr_err 187 fs/cachefiles/namei.c pr_err("\n"); pr_err 188 fs/cachefiles/namei.c pr_err("Error: Unexpected object collision\n"); pr_err 233 fs/cachefiles/namei.c pr_err("\n"); pr_err 234 fs/cachefiles/namei.c pr_err("Error: Overlong wait for old active object to go away\n"); pr_err 582 fs/cachefiles/namei.c pr_err("inode %lu is not a directory\n", pr_err 614 fs/cachefiles/namei.c pr_err("inode %lu is not a file or directory\n", pr_err 816 fs/cachefiles/namei.c pr_err("%s is not a directory\n", dirname); pr_err 842 fs/cachefiles/namei.c pr_err("mkdir %s failed with error %d\n", dirname, ret); pr_err 848 fs/cachefiles/namei.c pr_err("Lookup %s failed with error %d\n", dirname, ret); pr_err 938 fs/cachefiles/namei.c pr_err("Internal error: %d\n", ret); pr_err 997 fs/cachefiles/namei.c pr_err("Internal error: %d\n", ret); pr_err 33 fs/cachefiles/security.c pr_err("Security denies permission to nominate security context: error %d\n", pr_err 56 fs/cachefiles/security.c pr_err("Security denies permission to make dirs: error %d", pr_err 63 fs/cachefiles/security.c pr_err("Security denies permission to create files: error %d", pr_err 50 fs/cachefiles/xattr.c pr_err("Can't set xattr on %pd [%lu] (err %d)\n", pr_err 62 fs/cachefiles/xattr.c pr_err("Can't read xattr on %pd [%lu] (err %d)\n", pr_err 82 fs/cachefiles/xattr.c pr_err("Cache object %lu type xattr length incorrect\n", pr_err 89 fs/cachefiles/xattr.c pr_err("Cache object %pd [%lu] type %s not %s\n", pr_err 294 fs/cachefiles/xattr.c pr_err("Cache object %lu xattr length incorrect\n", pr_err 69 fs/ceph/cache.c pr_err("fscache cookie already registered for fsid %pU\n", fsid); pr_err 70 fs/ceph/cache.c pr_err(" use fsc=%%s mount option to specify a uniquifier\n"); pr_err 98 fs/ceph/cache.c pr_err("unable to register fscache cookie for fsid %pU\n", pr_err 709 fs/ceph/caps.c pr_err("ceph_add_cap: couldn't find snap realm %llx\n", pr_err 1538 fs/ceph/caps.c pr_err("__flush_snaps: error sending cap flushsnap, " pr_err 2335 fs/ceph/caps.c pr_err("%p auth cap %p not mds%d ???\n", pr_err 2355 fs/ceph/caps.c pr_err("kick_flushing_caps: error sending " pr_err 2375 fs/ceph/caps.c pr_err("kick_flushing_caps: error sending " pr_err 2406 fs/ceph/caps.c pr_err("%p auth cap %p not mds%d ???\n", pr_err 2454 fs/ceph/caps.c pr_err("%p auth cap %p not mds%d ???\n", pr_err 4007 fs/ceph/caps.c pr_err("ceph_handle_caps: unknown cap op %d %s\n", op, pr_err 4029 fs/ceph/caps.c pr_err("ceph_handle_caps: corrupt message\n"); pr_err 284 fs/ceph/inode.c pr_err("fill_dirfrag ENOMEM on mds ref %llx.%llx fg %x\n", pr_err 364 fs/ceph/inode.c pr_err("fill_fragtree %llx.%llx invalid split %d/%u, " pr_err 612 fs/ceph/inode.c pr_err("fill_file_size non-zero size for directory\n"); pr_err 768 fs/ceph/inode.c pr_err("fill_inode ENOMEM xattr blob %d bytes\n", pr_err 931 fs/ceph/inode.c pr_err("fill_inode %llx.%llx BAD symlink " pr_err 956 fs/ceph/inode.c pr_err("fill_inode %llx.%llx BAD mode 0%o\n", pr_err 1183 fs/ceph/inode.c pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n", pr_err 1313 fs/ceph/inode.c pr_err("fill_inode badness %p %llx.%llx\n", pr_err 1499 fs/ceph/inode.c pr_err("fill_inode badness on %p got %d\n", in, rc); pr_err 1700 fs/ceph/inode.c pr_err("fill_inode badness on %p\n", in); pr_err 1876 fs/ceph/inode.c pr_err("invalidate_pages %p fails\n", inode); pr_err 324 fs/ceph/mds_client.c pr_err("problem parsing mds trace %d\n", err); pr_err 357 fs/ceph/mds_client.c pr_err("dir contents are larger than expected\n"); pr_err 394 fs/ceph/mds_client.c pr_err("problem parsing dir contents %d\n", err); pr_err 510 fs/ceph/mds_client.c pr_err("mds parse_reply err %d\n", err); pr_err 777 fs/ceph/mds_client.c pr_err("__register_request %p " pr_err 1038 fs/ceph/mds_client.c pr_err("create_session_msg ENOMEM creating msg\n"); pr_err 1106 fs/ceph/mds_client.c pr_err("create_session_msg ENOMEM creating msg\n"); pr_err 1943 fs/ceph/mds_client.c pr_err("send_cap_releases mds%d, failed to allocate message\n", pr_err 2188 fs/ceph/mds_client.c pr_err("build_path did not end path lookup where " pr_err 2800 fs/ceph/mds_client.c pr_err("mdsc_handle_reply got corrupt (short) reply\n"); pr_err 2818 fs/ceph/mds_client.c pr_err("mdsc_handle_reply got %llu on session mds%d" pr_err 2914 fs/ceph/mds_client.c pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid); pr_err 3035 fs/ceph/mds_client.c pr_err("mdsc_handle_forward decode error err=%d\n", err); pr_err 3182 fs/ceph/mds_client.c pr_err("mdsc_handle_session bad op %d mds%d\n", op, mds); pr_err 3199 fs/ceph/mds_client.c pr_err("mdsc_handle_session corrupt message mds%d len %d\n", mds, pr_err 3736 fs/ceph/mds_client.c pr_err("error %d preparing reconnect for mds%d\n", err, mds); pr_err 3964 fs/ceph/mds_client.c pr_err("corrupt lease message\n"); pr_err 4527 fs/ceph/mds_client.c pr_err("error decoding fsmap\n"); pr_err 4594 fs/ceph/mds_client.c pr_err("error decoding mdsmap %d\n", err); pr_err 4674 fs/ceph/mds_client.c pr_err("received unknown message type %d %s\n", type, pr_err 4761 fs/ceph/mds_client.c pr_err("unable to allocate msg type %d len %d\n", pr_err 362 fs/ceph/mdsmap.c pr_err("corrupt mdsmap\n"); pr_err 48 fs/ceph/quota.c pr_err("%s corrupt message mds%d len %d\n", __func__, pr_err 398 fs/ceph/snap.c pr_err("build_snap_context %llx %p fail %d\n", realm->ino, pr_err 473 fs/ceph/snap.c pr_err("ENOMEM allocating ceph_cap_snap on %p\n", inode); pr_err 790 fs/ceph/snap.c pr_err("update_snap_trace error %d\n", err); pr_err 1002 fs/ceph/snap.c pr_err("corrupt snap message from mds%d\n", mds); pr_err 1155 fs/ceph/snap.c pr_err("snapid map %llx -> %x still in use\n", pr_err 250 fs/ceph/super.c pr_err("bad option arg (not int) at '%s'\n", c); pr_err 300 fs/ceph/super.c pr_err("fscache support is disabled\n"); pr_err 385 fs/ceph/super.c pr_err("fscache support is disabled\n"); pr_err 549 fs/ceph/super.c pr_err("device name is missing path (no : separator in %s)\n", pr_err 105 fs/char_dev.c pr_err("CHRDEV \"%s\" major requested (%u) is greater than the maximum (%u)\n", pr_err 111 fs/char_dev.c pr_err("CHRDEV \"%s\" minor range requested (%u-%u) is out of range of maximum range (%u-%u) for a single major\n", pr_err 125 fs/char_dev.c pr_err("CHRDEV \"%s\" dynamic allocation region is full\n", pr_err 2271 fs/cifs/connect.c pr_err("CIFS: bad ip= option (%s).\n", string); pr_err 2444 fs/cifs/connect.c pr_err("CIFS: Unknown mount option \"%s\"\n", invalid); pr_err 2480 fs/cifs/connect.c pr_err("Unable to determine destination address.\n"); pr_err 50 fs/coda/dir.c pr_err("name too long: lookup, %s %zu\n", pr_err 376 fs/coda/dir.c pr_err("%s: read dir %s failed %d\n", pr_err 384 fs/coda/dir.c pr_err("%s: short read on %s\n", pr_err 391 fs/coda/dir.c pr_err("%s: invalid dir %s\n", pr_err 364 fs/coda/psdev.c pr_err("%s: unable to get major %d\n", pr_err 1929 fs/configfs/dir.c pr_err("Tried to unregister non-subsystem!\n"); pr_err 1943 fs/configfs/dir.c pr_err("Tried to unregister non-empty subsystem!\n"); pr_err 157 fs/configfs/mount.c pr_err("Unable to register filesystem!\n"); pr_err 650 fs/cramfs/inode.c pr_err("unable to get direct memory access to mtd:%s\n", pr_err 668 fs/cramfs/inode.c pr_err("unable to get direct memory access to mtd:%s\n", pr_err 897 fs/cramfs/inode.c pr_err("bad data blocksize %u\n", block_len); pr_err 43 fs/cramfs/uncompress.c pr_err("zlib_inflateReset error %d\n", err); pr_err 54 fs/cramfs/uncompress.c pr_err("Error %d while decompressing!\n", err); pr_err 55 fs/cramfs/uncompress.c pr_err("%p(%d)->%p(%d)\n", src, srclen, dst, dstlen); pr_err 326 fs/debugfs/inode.c pr_err("Unable to pin filesystem for file '%s'\n", name); pr_err 342 fs/debugfs/inode.c pr_err("Directory '%s' with parent '%s' already present!\n", pr_err 345 fs/debugfs/inode.c pr_err("File '%s' in directory '%s' already present!\n", pr_err 391 fs/debugfs/inode.c pr_err("out of free dentries, can not create file '%s'\n", pr_err 557 fs/debugfs/inode.c pr_err("out of free dentries, can not create directory '%s'\n", pr_err 599 fs/debugfs/inode.c pr_err("out of free dentries, can not create automount '%s'\n", pr_err 657 fs/debugfs/inode.c pr_err("out of free dentries, can not create symlink '%s'\n", pr_err 314 fs/devpts/inode.c pr_err("called with bogus options\n"); pr_err 344 fs/devpts/inode.c pr_err("Unable to alloc dentry for ptmx node\n"); pr_err 353 fs/devpts/inode.c pr_err("Unable to alloc inode for ptmx node\n"); pr_err 480 fs/devpts/inode.c pr_err("get root dentry failed\n"); pr_err 567 fs/ecryptfs/main.c pr_err("eCryptfs: maximum fs stacking depth exceeded\n"); pr_err 48 fs/efs/dir.c pr_err("%s(): failed to read dir block %d\n", pr_err 56 fs/efs/dir.c pr_err("%s(): invalid directory block\n", __func__); pr_err 218 fs/efs/inode.c pr_err("%s() failed to map (1 extent)\n", __func__); pr_err 236 fs/efs/inode.c pr_err("%s() failed to map block %u (dir)\n", __func__, block); pr_err 263 fs/efs/inode.c pr_err("couldn't find direct extent for indirect extent %d (block %u)\n", pr_err 281 fs/efs/inode.c pr_err("%s() failed at block %d\n", pr_err 296 fs/efs/inode.c pr_err("extent %d has bad magic number in block %d\n", pr_err 309 fs/efs/inode.c pr_err("%s() failed to map block %u (indir)\n", __func__, block); pr_err 35 fs/efs/namei.c pr_err("%s(): failed to read dir block %d\n", pr_err 43 fs/efs/namei.c pr_err("%s(): invalid directory block\n", __func__); pr_err 265 fs/efs/super.c pr_err("device does not support %d byte blocks\n", pr_err 274 fs/efs/super.c pr_err("cannot read volume header\n"); pr_err 292 fs/efs/super.c pr_err("cannot read superblock\n"); pr_err 316 fs/efs/super.c pr_err("get root inode failed\n"); pr_err 322 fs/efs/super.c pr_err("get root dentry failed\n"); pr_err 307 fs/erofs/data.c pr_err("%s, readahead error at page %lu of nid %llu\n", pr_err 30 fs/erofs/super.c pr_err("(device %s): %s: %pV", sb->s_id, function, &vaf); pr_err 275 fs/ext4/ext4_jbd2.c pr_err("EXT4: jbd2_journal_dirty_metadata " pr_err 3121 fs/f2fs/data.c pr_err("swapon: swapfile has holes\n"); pr_err 328 fs/fs_parser.c pr_err("VALIDATE C-TBL[%zu]: Null\n", i); pr_err 334 fs/fs_parser.c pr_err("VALIDATE C-TBL[%zu]: Duplicate %s\n", pr_err 339 fs/fs_parser.c pr_err("VALIDATE C-TBL[%zu]: Missorted %s>=%s\n", pr_err 347 fs/fs_parser.c pr_err("VALIDATE C-TBL[%zu]: %s->%d const out of range (%d-%d)\n", pr_err 371 fs/fs_parser.c pr_err("VALIDATE Parser: No name\n"); pr_err 383 fs/fs_parser.c pr_err("VALIDATE %s: PARAM[%s] Bad type %u\n", pr_err 393 fs/fs_parser.c pr_err("VALIDATE %s: PARAM[%s]: Duplicate\n", pr_err 405 fs/fs_parser.c pr_err("VALIDATE %s: Enum table but no parameters\n", pr_err 411 fs/fs_parser.c pr_err("VALIDATE %s: Enum table but no enum-type values\n", pr_err 424 fs/fs_parser.c pr_err("VALIDATE %s: e[%tu] enum val for %s\n", pr_err 441 fs/fs_parser.c pr_err("VALIDATE %s: PARAM[%s] enum with no values\n", pr_err 448 fs/fs_parser.c pr_err("VALIDATE %s: enum-type values, but no enum table\n", pr_err 287 fs/fscache/cache.c pr_err("Cache tag '%s' already in use\n", tagname); pr_err 316 fs/fscache/cache.c pr_err("Cache '%s' stopped due to I/O error\n", pr_err 36 fs/fscache/cookie.c pr_err("%c-cookie c=%p [p=%p fl=%lx nc=%u na=%u]\n", pr_err 40 fs/fscache/cookie.c pr_err("%c-cookie d=%p n=%p\n", pr_err 45 fs/fscache/cookie.c pr_err("%c-cookie o=%p\n", pr_err 48 fs/fscache/cookie.c pr_err("%c-key=[%u] '", prefix, cookie->key_len); pr_err 222 fs/fscache/cookie.c pr_err("Duplicate cookie detected\n"); pr_err 723 fs/fscache/cookie.c pr_err("Cookie '%s' still has children\n", pr_err 446 fs/fscache/internal.h pr_err("\n"); \ pr_err 447 fs/fscache/internal.h pr_err("Assertion failed\n"); \ pr_err 455 fs/fscache/internal.h pr_err("\n"); \ pr_err 456 fs/fscache/internal.h pr_err("Assertion failed\n"); \ pr_err 457 fs/fscache/internal.h pr_err("%lx " #OP " %lx is false\n", \ pr_err 466 fs/fscache/internal.h pr_err("\n"); \ pr_err 467 fs/fscache/internal.h pr_err("Assertion failed\n"); \ pr_err 475 fs/fscache/internal.h pr_err("\n"); \ pr_err 476 fs/fscache/internal.h pr_err("Assertion failed\n"); \ pr_err 477 fs/fscache/internal.h pr_err("%lx " #OP " %lx is false\n", \ pr_err 1096 fs/fscache/object.c pr_err("Error: Object already killed by cache [%s]\n", pr_err 86 fs/fscache/operation.c pr_err("Unexpected op type %lx", op->flags); pr_err 228 fs/fuse/cuse.c pr_err("info not properly terminated\n"); pr_err 245 fs/fuse/cuse.c pr_err("zero length info key specified\n"); pr_err 289 fs/fuse/cuse.c pr_err("DEVNAME unspecified\n"); pr_err 352 fs/fuse/cuse.c pr_err("failed to register chrdev region\n"); pr_err 309 fs/fuse/virtio_fs.c pr_err("virtio-fs: virtio_fs_enqueue_req() failed %d\n", pr_err 1018 fs/fuse/virtio_fs.c pr_err("virtio-fs: virtio_fs_enqueue_req() failed %d\n", ret); pr_err 1092 fs/gfs2/glock.c pr_err("%pV", &vaf); pr_err 24 fs/gfs2/util.h pr_err("fsid=%s: " fmt, (fs)->sd_fsname, ##__VA_ARGS__) pr_err 141 fs/hfs/bfind.c pr_err("inconsistency in B*Tree (%d,%d,%d,%u,%u)\n", pr_err 223 fs/hfs/bnode.c pr_err("request for non-existent node %d in B*Tree\n", cnid); pr_err 245 fs/hfs/bnode.c pr_err("request for non-existent node %d in B*Tree\n", cnid); pr_err 51 fs/hfs/brec.c pr_err("keylen %d too large\n", retval); pr_err 57 fs/hfs/brec.c pr_err("keylen %d too large\n", retval); pr_err 52 fs/hfs/btree.c pr_err("invalid btree extent records\n"); pr_err 64 fs/hfs/btree.c pr_err("invalid btree extent records (0 size)\n"); pr_err 103 fs/hfs/btree.c pr_err("invalid extent max_key_len %d\n", pr_err 110 fs/hfs/btree.c pr_err("invalid catalog max_key_len %d\n", pr_err 149 fs/hfs/btree.c pr_err("node %d:%d still has %d user(s)!\n", pr_err 200 fs/hfs/catalog.c pr_err("found bad thread record in catalog\n"); pr_err 207 fs/hfs/catalog.c pr_err("bad catalog namelength\n"); pr_err 84 fs/hfs/dir.c pr_err("bad catalog folder thread\n"); pr_err 106 fs/hfs/dir.c pr_err("walked past end of dir\n"); pr_err 121 fs/hfs/dir.c pr_err("small dir entry\n"); pr_err 130 fs/hfs/dir.c pr_err("small file entry\n"); pr_err 138 fs/hfs/dir.c pr_err("bad catalog entry type %d\n", type); pr_err 51 fs/hfs/mdb.c pr_err("invalid session number or type of track\n"); pr_err 104 fs/hfs/mdb.c pr_err("bad allocation block size %d\n", size); pr_err 121 fs/hfs/mdb.c pr_err("unable to set blocksize to %u\n", size); pr_err 181 fs/hfs/mdb.c pr_err("unable to read volume bitmap\n"); pr_err 195 fs/hfs/mdb.c pr_err("unable to open extent tree\n"); pr_err 200 fs/hfs/mdb.c pr_err("unable to open catalog tree\n"); pr_err 314 fs/hfs/mdb.c pr_err("unable to read volume bitmap\n"); pr_err 251 fs/hfs/super.c pr_err("uid requires an argument\n"); pr_err 256 fs/hfs/super.c pr_err("invalid uid %d\n", tmp); pr_err 262 fs/hfs/super.c pr_err("gid requires an argument\n"); pr_err 267 fs/hfs/super.c pr_err("invalid gid %d\n", tmp); pr_err 273 fs/hfs/super.c pr_err("umask requires a value\n"); pr_err 281 fs/hfs/super.c pr_err("file_umask requires a value\n"); pr_err 288 fs/hfs/super.c pr_err("dir_umask requires a value\n"); pr_err 295 fs/hfs/super.c pr_err("part requires an argument\n"); pr_err 301 fs/hfs/super.c pr_err("session requires an argument\n"); pr_err 307 fs/hfs/super.c pr_err("type requires a 4 character value\n"); pr_err 313 fs/hfs/super.c pr_err("creator requires a 4 character value\n"); pr_err 322 fs/hfs/super.c pr_err("unable to change codepage\n"); pr_err 329 fs/hfs/super.c pr_err("unable to load codepage \"%s\"\n", p); pr_err 337 fs/hfs/super.c pr_err("unable to change iocharset\n"); pr_err 344 fs/hfs/super.c pr_err("unable to load iocharset \"%s\"\n", p); pr_err 358 fs/hfs/super.c pr_err("unable to load default iocharset\n"); pr_err 398 fs/hfs/super.c pr_err("unable to parse mount options\n"); pr_err 448 fs/hfs/super.c pr_err("get root inode failed\n"); pr_err 145 fs/hfsplus/attributes.c pr_err("attributes file doesn't exist\n"); pr_err 208 fs/hfsplus/attributes.c pr_err("attributes file doesn't exist\n"); pr_err 288 fs/hfsplus/attributes.c pr_err("only inline data xattr are supported\n"); pr_err 291 fs/hfsplus/attributes.c pr_err("invalid extended attribute record\n"); pr_err 317 fs/hfsplus/attributes.c pr_err("attributes file doesn't exist\n"); pr_err 336 fs/hfsplus/attributes.c pr_err("invalid extended attribute name\n"); pr_err 362 fs/hfsplus/attributes.c pr_err("attributes file doesn't exist\n"); pr_err 374 fs/hfsplus/attributes.c pr_err("xattr search failed\n"); pr_err 210 fs/hfsplus/bfind.c pr_err("inconsistency in B*Tree (%d,%d,%d,%u,%u)\n", pr_err 388 fs/hfsplus/bnode.c pr_err("request for non-existent node %d in B*Tree\n", pr_err 409 fs/hfsplus/bnode.c pr_err("request for non-existent node %d in B*Tree\n", pr_err 49 fs/hfsplus/brec.c pr_err("recoff %d too large\n", recoff); pr_err 55 fs/hfsplus/brec.c pr_err("keylen %d too large\n", pr_err 156 fs/hfsplus/btree.c pr_err("invalid btree extent records (0 size)\n"); pr_err 183 fs/hfsplus/btree.c pr_err("invalid extent max_key_len %d\n", pr_err 188 fs/hfsplus/btree.c pr_err("invalid extent btree flag\n"); pr_err 196 fs/hfsplus/btree.c pr_err("invalid catalog max_key_len %d\n", pr_err 201 fs/hfsplus/btree.c pr_err("invalid catalog btree flag\n"); pr_err 215 fs/hfsplus/btree.c pr_err("invalid attributes max_key_len %d\n", pr_err 222 fs/hfsplus/btree.c pr_err("unknown B*Tree requested\n"); pr_err 227 fs/hfsplus/btree.c pr_err("invalid btree flag\n"); pr_err 208 fs/hfsplus/catalog.c pr_err("found bad thread record in catalog\n"); pr_err 213 fs/hfsplus/catalog.c pr_err("catalog name length corrupted\n"); pr_err 113 fs/hfsplus/dir.c pr_err("invalid catalog entry type in lookup\n"); pr_err 172 fs/hfsplus/dir.c pr_err("bad catalog folder thread\n"); pr_err 177 fs/hfsplus/dir.c pr_err("truncated catalog thread\n"); pr_err 193 fs/hfsplus/dir.c pr_err("walked past end of dir\n"); pr_err 213 fs/hfsplus/dir.c pr_err("small dir entry\n"); pr_err 229 fs/hfsplus/dir.c pr_err("small file entry\n"); pr_err 252 fs/hfsplus/dir.c pr_err("bad catalog entry type\n"); pr_err 365 fs/hfsplus/extents.c pr_err("can't free extent\n"); pr_err 376 fs/hfsplus/extents.c pr_err("can't free extent\n"); pr_err 451 fs/hfsplus/extents.c pr_err("extend alloc file! (%llu,%u,%u)\n", pr_err 332 fs/hfsplus/inode.c pr_err("sync non-existent attributes tree\n"); pr_err 550 fs/hfsplus/inode.c pr_err("bad catalog entry used to create inode\n"); pr_err 117 fs/hfsplus/options.c pr_err("creator requires a 4 character value\n"); pr_err 123 fs/hfsplus/options.c pr_err("type requires a 4 character value\n"); pr_err 129 fs/hfsplus/options.c pr_err("umask requires a value\n"); pr_err 136 fs/hfsplus/options.c pr_err("uid requires an argument\n"); pr_err 141 fs/hfsplus/options.c pr_err("invalid uid specified\n"); pr_err 147 fs/hfsplus/options.c pr_err("gid requires an argument\n"); pr_err 152 fs/hfsplus/options.c pr_err("invalid gid specified\n"); pr_err 158 fs/hfsplus/options.c pr_err("part requires an argument\n"); pr_err 164 fs/hfsplus/options.c pr_err("session requires an argument\n"); pr_err 170 fs/hfsplus/options.c pr_err("unable to change nls mapping\n"); pr_err 177 fs/hfsplus/options.c pr_err("unable to load nls mapping \"%s\"\n", pr_err 139 fs/hfsplus/super.c pr_err("b-tree write err: %d, ino %lu\n", pr_err 260 fs/hfsplus/super.c pr_err("delayed sync fs err %d\n", err); pr_err 401 fs/hfsplus/super.c pr_err("unable to parse mount options\n"); pr_err 409 fs/hfsplus/super.c pr_err("unable to load nls for utf8\n"); pr_err 425 fs/hfsplus/super.c pr_err("wrong filesystem version\n"); pr_err 449 fs/hfsplus/super.c pr_err("filesystem size too large\n"); pr_err 476 fs/hfsplus/super.c pr_err("failed to load extents file\n"); pr_err 481 fs/hfsplus/super.c pr_err("failed to load catalog file\n"); pr_err 488 fs/hfsplus/super.c pr_err("failed to load attributes file\n"); pr_err 497 fs/hfsplus/super.c pr_err("failed to load allocation file\n"); pr_err 506 fs/hfsplus/super.c pr_err("failed to load root directory\n"); pr_err 147 fs/hfsplus/wrapper.c pr_err("invalid session number or type of track\n"); pr_err 248 fs/hfsplus/wrapper.c pr_err("unable to set blocksize to %u!\n", blocksize); pr_err 171 fs/hfsplus/xattr.c pr_err("failed to load attributes file\n"); pr_err 196 fs/hfsplus/xattr.c pr_err("failed to extend attributes file\n"); pr_err 207 fs/hfsplus/xattr.c pr_err("failed to allocate memory for header node\n"); pr_err 240 fs/hfsplus/xattr.c pr_err("failed to load attributes file\n"); pr_err 280 fs/hfsplus/xattr.c pr_err("can't init xattr find struct\n"); pr_err 286 fs/hfsplus/xattr.c pr_err("catalog searching failed\n"); pr_err 292 fs/hfsplus/xattr.c pr_err("xattr exists yet\n"); pr_err 339 fs/hfsplus/xattr.c pr_err("xattr exists yet\n"); pr_err 351 fs/hfsplus/xattr.c pr_err("cannot replace xattr\n"); pr_err 384 fs/hfsplus/xattr.c pr_err("invalid catalog entry type\n"); pr_err 455 fs/hfsplus/xattr.c pr_err("can't init xattr find struct\n"); pr_err 513 fs/hfsplus/xattr.c pr_err("can't allocate xattr entry\n"); pr_err 519 fs/hfsplus/xattr.c pr_err("can't init xattr find struct\n"); pr_err 528 fs/hfsplus/xattr.c pr_err("xattr searching failed\n"); pr_err 541 fs/hfsplus/xattr.c pr_err("invalid xattr record size\n"); pr_err 547 fs/hfsplus/xattr.c pr_err("only inline data xattr are supported\n"); pr_err 551 fs/hfsplus/xattr.c pr_err("invalid xattr record\n"); pr_err 621 fs/hfsplus/xattr.c pr_err("can't init xattr find struct\n"); pr_err 699 fs/hfsplus/xattr.c pr_err("can't init xattr find struct\n"); pr_err 725 fs/hfsplus/xattr.c pr_err("invalid xattr key length: %d\n", key_len); pr_err 740 fs/hfsplus/xattr.c pr_err("unicode conversion failed\n"); pr_err 785 fs/hfsplus/xattr.c pr_err("can't init xattr find struct\n"); pr_err 791 fs/hfsplus/xattr.c pr_err("catalog searching failed\n"); pr_err 830 fs/hfsplus/xattr.c pr_err("invalid catalog entry type\n"); pr_err 86 fs/hpfs/buffer.c pr_err("%s(): read error\n", __func__); pr_err 107 fs/hpfs/buffer.c pr_err("%s(): getblk failed\n", __func__); pr_err 124 fs/hpfs/buffer.c pr_err("%s(): unaligned read\n", __func__); pr_err 143 fs/hpfs/buffer.c pr_err("%s(): out of memory\n", __func__); pr_err 176 fs/hpfs/buffer.c pr_err("%s(): unaligned read\n", __func__); pr_err 192 fs/hpfs/buffer.c pr_err("%s(): out of memory\n", __func__); pr_err 135 fs/hpfs/dir.c pr_err("pos==%d\n", (int)ctx->pos); pr_err 38 fs/hpfs/dnode.c pr_err("out of memory for position list\n"); pr_err 101 fs/hpfs/dnode.c pr_err("%s(): %08x + %d\n", pr_err 113 fs/hpfs/dnode.c pr_err("%s(): %08x - %d\n", pr_err 253 fs/hpfs/dnode.c pr_err("out of memory, can't add to dnode\n"); pr_err 295 fs/hpfs/dnode.c pr_err("out of memory for dnode splitting\n"); pr_err 611 fs/hpfs/dnode.c pr_err("out of memory for dtree balancing\n"); pr_err 652 fs/hpfs/dnode.c pr_err("unbalanced dnode tree, see hpfs.txt 4 more info\n"); pr_err 653 fs/hpfs/dnode.c pr_err("terminating balancing operation\n"); pr_err 659 fs/hpfs/dnode.c pr_err("unbalanced dnode tree, see hpfs.txt 4 more info\n"); pr_err 660 fs/hpfs/dnode.c pr_err("goin'on\n"); pr_err 674 fs/hpfs/dnode.c pr_err("out of memory for dtree balancing\n"); pr_err 1014 fs/hpfs/dnode.c pr_err("out of memory, can't map dirent\n"); pr_err 55 fs/hpfs/ea.c pr_err("out of memory for EA\n"); pr_err 143 fs/hpfs/ea.c pr_err("out of memory for EA\n"); pr_err 169 fs/hpfs/ea.c pr_err("out of memory for EA\n"); pr_err 189 fs/hpfs/inode.c pr_err("write_inode: some position still there\n"); pr_err 69 fs/hpfs/map.c pr_err("Code page directory magic doesn't match (magic = %08x)\n", pr_err 75 fs/hpfs/map.c pr_err("n_code_pages == 0\n"); pr_err 84 fs/hpfs/map.c pr_err("Code page index out of array\n"); pr_err 90 fs/hpfs/map.c pr_err("Code page index out of sector\n"); pr_err 96 fs/hpfs/map.c pr_err("out of memory for code page table\n"); pr_err 119 fs/hpfs/map.c pr_err("can't allocate memory for bitmap directory\n"); pr_err 313 fs/hpfs/map.c pr_err("unbalanced dnode tree, dnode %08x; see hpfs.txt 4 more info\n", pr_err 60 fs/hpfs/name.c pr_err("Long name flag mismatch - name "); pr_err 64 fs/hpfs/name.c pr_err("It's nothing serious. It could happen because of bug in OS/2.\nSet checks=normal to disable this message.\n"); pr_err 68 fs/hpfs/name.c pr_err("can't allocate memory for name conversion buffer\n"); pr_err 67 fs/hpfs/super.c pr_err("filesystem error: %pV", &vaf); pr_err 465 fs/hpfs/super.c pr_err("bad mount options.\n"); pr_err 473 fs/hpfs/super.c pr_err("timeshift can't be changed using remount.\n"); pr_err 579 fs/hpfs/super.c pr_err("bad mount options.\n"); pr_err 599 fs/hpfs/super.c pr_err("Bad magic ... probably not HPFS\n"); pr_err 605 fs/hpfs/super.c pr_err("Bad version %d,%d. Mount readonly to go around\n", pr_err 607 fs/hpfs/super.c pr_err("please try recent version of HPFS driver at http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi and if it still can't understand this format, contact author - mikulas@artax.karlin.mff.cuni.cz\n"); pr_err 658 fs/hpfs/super.c pr_err("Improperly stopped, not mounted\n"); pr_err 672 fs/hpfs/super.c pr_err("Spare dnodes used, try chkdsk\n"); pr_err 678 fs/hpfs/super.c pr_err("Proceeding, but your filesystem could be corrupted if you delete files or directories\n"); pr_err 698 fs/hpfs/super.c pr_err("You really don't want any checks? You are crazy...\n"); pr_err 703 fs/hpfs/super.c pr_err("code page support is disabled\n"); pr_err 1196 fs/hugetlbfs/inode.c pr_err("Unsupported page size %lu MB\n", ps >> 20); pr_err 1243 fs/hugetlbfs/inode.c pr_err("Minimum size can not be greater than maximum size\n"); pr_err 1442 fs/hugetlbfs/inode.c pr_err("Cannot mount internal hugetlbfs for page size %uK", pr_err 91 fs/iomap/swapfile.c pr_err("swapon: file is inline\n"); pr_err 94 fs/iomap/swapfile.c pr_err("swapon: file has unallocated extents\n"); pr_err 100 fs/iomap/swapfile.c pr_err("swapon: file is not committed\n"); pr_err 104 fs/iomap/swapfile.c pr_err("swapon: file has shared extents\n"); pr_err 110 fs/iomap/swapfile.c pr_err("swapon: file is on multiple devices\n"); pr_err 1169 fs/jbd2/journal.c pr_err("%s: Cannot get buffer for journal superblock\n", pr_err 1241 fs/jbd2/journal.c pr_err("%s: Cannot locate journal superblock\n", pr_err 1409 fs/jbd2/transaction.c pr_err("JBD2: assertion failure: h_type=%u " pr_err 241 fs/jffs2/compr.c pr_err("unknown compression mode\n"); pr_err 79 fs/jffs2/debug.h pr_err("error: (%d) %s: " fmt, \ pr_err 471 fs/jffs2/gc.c pr_err("Error garbage collecting node at %08x!\n", pr_err 1071 fs/jffs2/scan.c pr_err("Dirent at %08x has zeroes in name. Truncating to %d chars\n", pr_err 447 fs/jffs2/summary.c pr_err("Dirent at %08x has zero at start of name. Aborting mount.\n", pr_err 453 fs/jffs2/summary.c pr_err("Dirent at %08x has zeroes in name. Truncating to %d chars\n", pr_err 378 fs/jffs2/super.c pr_err("error: Failed to initialise inode cache\n"); pr_err 383 fs/jffs2/super.c pr_err("error: Failed to initialise compressors\n"); pr_err 388 fs/jffs2/super.c pr_err("error: Failed to initialise slab caches\n"); pr_err 393 fs/jffs2/super.c pr_err("error: Failed to register filesystem\n"); pr_err 1048 fs/jffs2/wbuf.c pr_err("cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n", pr_err 1090 fs/jffs2/wbuf.c pr_err("cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n", pr_err 1115 fs/jffs2/wbuf.c pr_err("cannot write OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n", pr_err 1193 fs/jffs2/wbuf.c pr_err("inconsistent device description\n"); pr_err 93 fs/jfs/super.c pr_err("ERROR: (device %s): %ps: %pV\n", pr_err 271 fs/jfs/super.c pr_err("JFS: charset not found\n"); pr_err 290 fs/jfs/super.c pr_err("JFS: Cannot determine volume size\n"); pr_err 311 fs/jfs/super.c pr_err("JFS: %s is an invalid error handler\n", pr_err 330 fs/jfs/super.c pr_err("JFS: quota operations not supported\n"); pr_err 369 fs/jfs/super.c pr_err("JFS: Invalid value of umask\n"); pr_err 386 fs/jfs/super.c pr_err("JFS: discard option not supported on device\n"); pr_err 406 fs/jfs/super.c pr_err("JFS: discard option not supported on device\n"); pr_err 443 fs/jfs/super.c pr_err("JFS: resize requires volume to be mounted read-write\n"); pr_err 525 fs/jfs/super.c pr_err("resize option for remount only\n"); pr_err 293 fs/lockd/svc.c pr_err("%s: no users! task=%p, net=%x\n", pr_err 34 fs/nfs/blocklayout/dev.c pr_err("failed to unregister PR key.\n"); pr_err 288 fs/nfs/blocklayout/dev.c pr_err("pNFS: unsupported designator " pr_err 295 fs/nfs/blocklayout/dev.c pr_err("pNFS: invalid designator " pr_err 379 fs/nfs/blocklayout/dev.c pr_err("pNFS: block device %s does not support reservations.", pr_err 387 fs/nfs/blocklayout/dev.c pr_err("pNFS: failed to register key for block device %s.", pr_err 1260 fs/nfs/nfs4state.c pr_err("NFS: volatile file handles not supported (server %s)\n", pr_err 1528 fs/nfs/nfs4state.c pr_err("NFS: %s: unhandled error %d\n", pr_err 1952 fs/nfs/nfs4state.c pr_err("NFS: Server %s reports our clientid is in use\n", pr_err 2100 fs/nfs/nfs4state.c pr_err("NFS: migration recovery failed (server %s)\n", pr_err 259 fs/nfsd/blocklayout.c pr_err("pNFS: INQUIRY 0x83 failed with: %x\n", pr_err 273 fs/nfsd/blocklayout.c pr_err("pNFS: INQUIRY 0x83 response invalid (len = %zd)\n", pr_err 356 fs/nfsd/blocklayout.c pr_err("pNFS: device %s does not support PRs.\n", pr_err 363 fs/nfsd/blocklayout.c pr_err("pNFS: failed to register key for device %s.\n", pr_err 371 fs/nfsd/blocklayout.c pr_err("pNFS: failed to reserve device %s.\n", pr_err 581 fs/nfsd/filecache.c pr_err("nfsd: unable to allocate nfsd_file_hashtbl\n"); pr_err 588 fs/nfsd/filecache.c pr_err("nfsd: unable to create nfsd_file_slab\n"); pr_err 595 fs/nfsd/filecache.c pr_err("nfsd: unable to create nfsd_file_mark_slab\n"); pr_err 602 fs/nfsd/filecache.c pr_err("nfsd: failed to init nfsd_file_lru: %d\n", ret); pr_err 608 fs/nfsd/filecache.c pr_err("nfsd: failed to register nfsd_file_shrinker: %d\n", ret); pr_err 614 fs/nfsd/filecache.c pr_err("nfsd: unable to register lease notifier: %d\n", ret); pr_err 620 fs/nfsd/filecache.c pr_err("nfsd: unable to create fsnotify group: %ld\n", pr_err 2772 fs/nfsd/nfs4proc.c pr_err("unable to encode reply to nonidempotent op %d (%s)\n", pr_err 1204 fs/nfsd/nfs4recover.c pr_err("NFSD: Unable to create client record on stable storage: %d\n", pr_err 89 fs/ntfs/debug.c pr_err("(device %s): %s(): %pV\n", pr_err 92 fs/ntfs/debug.c pr_err("%s(): %pV\n", flen ? function : "", &vaf); pr_err 362 fs/orangefs/protocol.h #define gossip_err pr_err pr_err 38 fs/overlayfs/dir.c pr_err("overlayfs: cleanup of '%pd2' failed (%i)\n", pr_err 56 fs/overlayfs/dir.c pr_err("overlayfs: workdir/%s already exists\n", name); pr_err 974 fs/overlayfs/readdir.c pr_err("overlayfs: lookup '%s/%.*s' failed (%i)\n", pr_err 1156 fs/overlayfs/readdir.c pr_err("overlayfs: failed index dir cleanup (%i)\n", err); pr_err 465 fs/overlayfs/super.c pr_err("overlayfs: bad mount option \"redirect_dir=%s\"\n", pr_err 563 fs/overlayfs/super.c pr_err("overlayfs: unrecognized mount option \"%s\" or missing value\n", p); pr_err 590 fs/overlayfs/super.c pr_err("overlayfs: conflicting options: metacopy=on,redirect_dir=%s\n", pr_err 719 fs/overlayfs/super.c pr_err("overlayfs: empty lowerdir\n"); pr_err 724 fs/overlayfs/super.c pr_err("overlayfs: failed to resolve '%s': %i\n", name, err); pr_err 729 fs/overlayfs/super.c pr_err("overlayfs: filesystem on '%s' not supported\n", name); pr_err 733 fs/overlayfs/super.c pr_err("overlayfs: '%s' not a directory\n", name); pr_err 755 fs/overlayfs/super.c pr_err("overlayfs: filesystem on '%s' not supported as upperdir\n", pr_err 772 fs/overlayfs/super.c pr_err("overlayfs: statfs failed on '%s'\n", name); pr_err 999 fs/overlayfs/super.c pr_err("overlayfs: conflicting %s path\n", name); pr_err 1016 fs/overlayfs/super.c pr_err("overlayfs: %s is in-use as upperdir/workdir of another mount, mount with '-o index=off' to override exclusive upperdir protection.\n", pr_err 1038 fs/overlayfs/super.c pr_err("overlayfs: upper fs is r/o, try multi-lower layers mount\n"); pr_err 1055 fs/overlayfs/super.c pr_err("overlayfs: failed to clone upperpath\n"); pr_err 1168 fs/overlayfs/super.c pr_err("overlayfs: workdir and upperdir must reside under the same mount\n"); pr_err 1172 fs/overlayfs/super.c pr_err("overlayfs: workdir and upperdir must be separate subtrees\n"); pr_err 1213 fs/overlayfs/super.c pr_err("overlayfs: failed to verify upper root origin\n"); pr_err 1236 fs/overlayfs/super.c pr_err("overlayfs: failed to verify index dir 'origin' xattr\n"); pr_err 1240 fs/overlayfs/super.c pr_err("overlayfs: failed to verify index dir 'upper' xattr\n"); pr_err 1309 fs/overlayfs/super.c pr_err("overlayfs: failed to get anonymous bdev for lowerpath\n"); pr_err 1360 fs/overlayfs/super.c pr_err("overlayfs: failed to clone lowerpath\n"); pr_err 1431 fs/overlayfs/super.c pr_err("overlayfs: too many lower directories, limit is %d\n", pr_err 1435 fs/overlayfs/super.c pr_err("overlayfs: at least 2 lowerdir are needed while upperdir nonexistent\n"); pr_err 1462 fs/overlayfs/super.c pr_err("overlayfs: maximum fs stacking depth exceeded\n"); pr_err 1518 fs/overlayfs/super.c pr_err("overlayfs: overlapping %s path\n", name); pr_err 1598 fs/overlayfs/super.c pr_err("overlayfs: missing 'lowerdir'\n"); pr_err 1613 fs/overlayfs/super.c pr_err("overlayfs: missing 'workdir'\n"); pr_err 742 fs/overlayfs/util.c pr_err("overlayfs: cleanup index of '%pd2' failed (%i)\n", dentry, err); pr_err 833 fs/overlayfs/util.c pr_err("overlayfs: failed to lock workdir+upperdir\n"); pr_err 643 fs/proc/kcore.c pr_err("couldn't create /proc/kcore\n"); pr_err 167 fs/proc/proc_sysctl.c pr_err("sysctl duplicate entry: "); pr_err 1040 fs/proc/proc_sysctl.c pr_err("sysctl could not get directory: "); pr_err 1108 fs/proc/proc_sysctl.c pr_err("sysctl table check failed: %s/%s %pV\n", pr_err 1640 fs/proc/proc_sysctl.c pr_err("sysctl link missing during unregister: "); pr_err 128 fs/proc/root.c pr_err("proc_fill_super: get root inode failed\n"); pr_err 134 fs/proc/root.c pr_err("proc_fill_super: allocate dentry failed\n"); pr_err 63 fs/proc/self.c pr_err("proc_fill_super: can't allocate /proc/self\n"); pr_err 63 fs/proc/thread_self.c pr_err("proc_fill_super: can't allocate /proc/thread_self\n"); pr_err 83 fs/pstore/ftrace.c pr_err("%s: unable to %sregister ftrace ops: %zd\n", pr_err 280 fs/pstore/platform.c pr_err("crypto_comp_compress failed, ret = %d!\n", ret); pr_err 302 fs/pstore/platform.c pr_err("Unknown compression: %s\n", zbackend->name); pr_err 308 fs/pstore/platform.c pr_err("Invalid compression size for %s: %d\n", pr_err 315 fs/pstore/platform.c pr_err("Failed %d byte compression buffer allocation for: %s\n", pr_err 323 fs/pstore/platform.c pr_err("crypto_alloc_comp('%s') failed: %ld\n", zbackend->name, pr_err 401 fs/pstore/platform.c pr_err("dump skipped in %s path: may corrupt error record\n", pr_err 406 fs/pstore/platform.c pr_err("could not grab semaphore?!\n"); pr_err 690 fs/pstore/platform.c pr_err("crypto_comp_decompress failed, ret = %d!\n", ret); pr_err 743 fs/pstore/platform.c pr_err("out of memory creating record\n"); pr_err 775 fs/pstore/platform.c pr_err("looping? Too many records seen from '%s'\n", pr_err 62 fs/pstore/pmsg.c pr_err("register_chrdev failed\n"); pr_err 68 fs/pstore/pmsg.c pr_err("device class file already in use\n"); pr_err 76 fs/pstore/pmsg.c pr_err("failed to create device\n"); pr_err 746 fs/pstore/ram.c pr_err("already initialized\n"); pr_err 761 fs/pstore/ram.c pr_err("NULL platform data\n"); pr_err 767 fs/pstore/ram.c pr_err("The memory size and the record/console size must be " pr_err 849 fs/pstore/ram.c pr_err("cannot allocate pstore crash dump buffer\n"); pr_err 857 fs/pstore/ram.c pr_err("registering with pstore failed\n"); pr_err 209 fs/pstore/ram_core.c pr_err("%s: invalid ecc_size %u (total %zu, buffer size %zu)\n", pr_err 236 fs/pstore/ram_core.c pr_err("cannot allocate ECC parity workspace\n"); pr_err 306 fs/pstore/ram_core.c pr_err("failed to allocate buffer\n"); pr_err 421 fs/pstore/ram_core.c pr_err("%s: Failed to allocate array for %u pages\n", pr_err 447 fs/pstore/ram_core.c pr_err("request mem region (%s 0x%llx@0x%llx) failed\n", pr_err 479 fs/pstore/ram_core.c pr_err("%s: Failed to map 0x%llx pages at 0x%llx\n", __func__, pr_err 570 fs/pstore/ram_core.c pr_err("failed to allocate persistent ram zone\n"); pr_err 76 fs/qnx6/dir.c pr_err("invalid direntry size (%i).\n", de->de_size); pr_err 81 fs/qnx6/dir.c pr_err("Error reading longname\n"); pr_err 89 fs/qnx6/dir.c pr_err("Filename too long (%i)\n", lf_size); pr_err 134 fs/qnx6/dir.c pr_err("%s(): read failed\n", __func__); pr_err 257 fs/qnx6/dir.c pr_err("undefined filename size in inode.\n"); pr_err 91 fs/qnx6/inode.c pr_err("hit unused blockpointer.\n"); pr_err 131 fs/qnx6/inode.c pr_err("Requested file block number (%u) too big.", no); pr_err 140 fs/qnx6/inode.c pr_err("Error reading block (%u)\n", block); pr_err 269 fs/qnx6/inode.c pr_err("unable to read the first superblock\n"); pr_err 283 fs/qnx6/inode.c pr_err("wrong signature (magic) in superblock #1.\n"); pr_err 317 fs/qnx6/inode.c pr_err("unable to set blocksize\n"); pr_err 323 fs/qnx6/inode.c pr_err("invalid mount options.\n"); pr_err 343 fs/qnx6/inode.c pr_err("unable to read the first superblock\n"); pr_err 358 fs/qnx6/inode.c pr_err("superblock #1 checksum error\n"); pr_err 364 fs/qnx6/inode.c pr_err("unable to set blocksize\n"); pr_err 386 fs/qnx6/inode.c pr_err("unable to read the second superblock\n"); pr_err 392 fs/qnx6/inode.c pr_err("wrong signature (magic) in superblock #2.\n"); pr_err 399 fs/qnx6/inode.c pr_err("superblock #2 checksum error\n"); pr_err 420 fs/qnx6/inode.c pr_err("too many inode levels (max %i, sb %i)\n", pr_err 425 fs/qnx6/inode.c pr_err("too many longfilename levels (max %i, sb %i)\n", pr_err 448 fs/qnx6/inode.c pr_err("get inode failed\n"); pr_err 462 fs/qnx6/inode.c pr_err("%s\n", errmsg); pr_err 543 fs/qnx6/inode.c pr_err("bad inode number on dev %s: %u is out of range\n", pr_err 553 fs/qnx6/inode.c pr_err("major problem: unable to read inode from dev %s\n", pr_err 48 fs/qnx6/super_mmi.c pr_err("Unable to read first mmi superblock\n"); pr_err 55 fs/qnx6/super_mmi.c pr_err("wrong signature (magic) in superblock #1.\n"); pr_err 63 fs/qnx6/super_mmi.c pr_err("superblock #1 checksum error\n"); pr_err 73 fs/qnx6/super_mmi.c pr_err("unable to set blocksize\n"); pr_err 86 fs/qnx6/super_mmi.c pr_err("unable to read the second superblock\n"); pr_err 92 fs/qnx6/super_mmi.c pr_err("wrong signature (magic) in superblock #2.\n"); pr_err 99 fs/qnx6/super_mmi.c pr_err("superblock #1 checksum error\n"); pr_err 105 fs/qnx6/super_mmi.c pr_err("unable to allocate memory.\n"); pr_err 366 fs/romfs/super.c pr_err("read error for inode 0x%lx\n", pos); pr_err 515 fs/romfs/super.c pr_err("bad initial checksum on dev %s.\n", sb->s_id); pr_err 634 fs/romfs/super.c pr_err("Failed to initialise inode cache\n"); pr_err 639 fs/romfs/super.c pr_err("Failed to register filesystem\n"); pr_err 13 fs/squashfs/squashfs.h #define ERROR(s, args...) pr_err("SQUASHFS error: "s, ## args) pr_err 1552 fs/super.c pr_err("Filesystem %s get_tree() didn't set fc->root\n", pr_err 202 fs/ubifs/compress.c pr_err("UBIFS error (pid %d): cannot initialize compressor %s, error %ld", pr_err 213 fs/ubifs/debug.c pr_err("\tmagic %#x\n", le32_to_cpu(ch->magic)); pr_err 214 fs/ubifs/debug.c pr_err("\tcrc %#x\n", le32_to_cpu(ch->crc)); pr_err 215 fs/ubifs/debug.c pr_err("\tnode_type %d (%s)\n", ch->node_type, pr_err 217 fs/ubifs/debug.c pr_err("\tgroup_type %d (%s)\n", ch->group_type, pr_err 219 fs/ubifs/debug.c pr_err("\tsqnum %llu\n", pr_err 221 fs/ubifs/debug.c pr_err("\tlen %u\n", le32_to_cpu(ch->len)); pr_err 232 fs/ubifs/debug.c pr_err("Dump in-memory inode:"); pr_err 233 fs/ubifs/debug.c pr_err("\tinode %lu\n", inode->i_ino); pr_err 234 fs/ubifs/debug.c pr_err("\tsize %llu\n", pr_err 236 fs/ubifs/debug.c pr_err("\tnlink %u\n", inode->i_nlink); pr_err 237 fs/ubifs/debug.c pr_err("\tuid %u\n", (unsigned int)i_uid_read(inode)); pr_err 238 fs/ubifs/debug.c pr_err("\tgid %u\n", (unsigned int)i_gid_read(inode)); pr_err 239 fs/ubifs/debug.c pr_err("\tatime %u.%u\n", pr_err 242 fs/ubifs/debug.c pr_err("\tmtime %u.%u\n", pr_err 245 fs/ubifs/debug.c pr_err("\tctime %u.%u\n", pr_err 248 fs/ubifs/debug.c pr_err("\tcreat_sqnum %llu\n", ui->creat_sqnum); pr_err 249 fs/ubifs/debug.c pr_err("\txattr_size %u\n", ui->xattr_size); pr_err 250 fs/ubifs/debug.c pr_err("\txattr_cnt %u\n", ui->xattr_cnt); pr_err 251 fs/ubifs/debug.c pr_err("\txattr_names %u\n", ui->xattr_names); pr_err 252 fs/ubifs/debug.c pr_err("\tdirty %u\n", ui->dirty); pr_err 253 fs/ubifs/debug.c pr_err("\txattr %u\n", ui->xattr); pr_err 254 fs/ubifs/debug.c pr_err("\tbulk_read %u\n", ui->bulk_read); pr_err 255 fs/ubifs/debug.c pr_err("\tsynced_i_size %llu\n", pr_err 257 fs/ubifs/debug.c pr_err("\tui_size %llu\n", pr_err 259 fs/ubifs/debug.c pr_err("\tflags %d\n", ui->flags); pr_err 260 fs/ubifs/debug.c pr_err("\tcompr_type %d\n", ui->compr_type); pr_err 261 fs/ubifs/debug.c pr_err("\tlast_page_read %lu\n", ui->last_page_read); pr_err 262 fs/ubifs/debug.c pr_err("\tread_in_a_row %lu\n", ui->read_in_a_row); pr_err 263 fs/ubifs/debug.c pr_err("\tdata_len %d\n", ui->data_len); pr_err 268 fs/ubifs/debug.c pr_err("List of directory entries:\n"); pr_err 276 fs/ubifs/debug.c pr_err("error %ld\n", PTR_ERR(dent)); pr_err 280 fs/ubifs/debug.c pr_err("\t%d: inode %llu, type %s, len %d\n", pr_err 303 fs/ubifs/debug.c pr_err("Not a node, first %zu bytes:", UBIFS_CH_SZ); pr_err 317 fs/ubifs/debug.c pr_err("\tpad_len %u\n", le32_to_cpu(pad->pad_len)); pr_err 325 fs/ubifs/debug.c pr_err("\tkey_hash %d (%s)\n", pr_err 327 fs/ubifs/debug.c pr_err("\tkey_fmt %d (%s)\n", pr_err 329 fs/ubifs/debug.c pr_err("\tflags %#x\n", sup_flags); pr_err 330 fs/ubifs/debug.c pr_err("\tbig_lpt %u\n", pr_err 332 fs/ubifs/debug.c pr_err("\tspace_fixup %u\n", pr_err 334 fs/ubifs/debug.c pr_err("\tmin_io_size %u\n", le32_to_cpu(sup->min_io_size)); pr_err 335 fs/ubifs/debug.c pr_err("\tleb_size %u\n", le32_to_cpu(sup->leb_size)); pr_err 336 fs/ubifs/debug.c pr_err("\tleb_cnt %u\n", le32_to_cpu(sup->leb_cnt)); pr_err 337 fs/ubifs/debug.c pr_err("\tmax_leb_cnt %u\n", le32_to_cpu(sup->max_leb_cnt)); pr_err 338 fs/ubifs/debug.c pr_err("\tmax_bud_bytes %llu\n", pr_err 340 fs/ubifs/debug.c pr_err("\tlog_lebs %u\n", le32_to_cpu(sup->log_lebs)); pr_err 341 fs/ubifs/debug.c pr_err("\tlpt_lebs %u\n", le32_to_cpu(sup->lpt_lebs)); pr_err 342 fs/ubifs/debug.c pr_err("\torph_lebs %u\n", le32_to_cpu(sup->orph_lebs)); pr_err 343 fs/ubifs/debug.c pr_err("\tjhead_cnt %u\n", le32_to_cpu(sup->jhead_cnt)); pr_err 344 fs/ubifs/debug.c pr_err("\tfanout %u\n", le32_to_cpu(sup->fanout)); pr_err 345 fs/ubifs/debug.c pr_err("\tlsave_cnt %u\n", le32_to_cpu(sup->lsave_cnt)); pr_err 346 fs/ubifs/debug.c pr_err("\tdefault_compr %u\n", pr_err 348 fs/ubifs/debug.c pr_err("\trp_size %llu\n", pr_err 350 fs/ubifs/debug.c pr_err("\trp_uid %u\n", le32_to_cpu(sup->rp_uid)); pr_err 351 fs/ubifs/debug.c pr_err("\trp_gid %u\n", le32_to_cpu(sup->rp_gid)); pr_err 352 fs/ubifs/debug.c pr_err("\tfmt_version %u\n", le32_to_cpu(sup->fmt_version)); pr_err 353 fs/ubifs/debug.c pr_err("\ttime_gran %u\n", le32_to_cpu(sup->time_gran)); pr_err 354 fs/ubifs/debug.c pr_err("\tUUID %pUB\n", sup->uuid); pr_err 361 fs/ubifs/debug.c pr_err("\thighest_inum %llu\n", pr_err 363 fs/ubifs/debug.c pr_err("\tcommit number %llu\n", pr_err 365 fs/ubifs/debug.c pr_err("\tflags %#x\n", le32_to_cpu(mst->flags)); pr_err 366 fs/ubifs/debug.c pr_err("\tlog_lnum %u\n", le32_to_cpu(mst->log_lnum)); pr_err 367 fs/ubifs/debug.c pr_err("\troot_lnum %u\n", le32_to_cpu(mst->root_lnum)); pr_err 368 fs/ubifs/debug.c pr_err("\troot_offs %u\n", le32_to_cpu(mst->root_offs)); pr_err 369 fs/ubifs/debug.c pr_err("\troot_len %u\n", le32_to_cpu(mst->root_len)); pr_err 370 fs/ubifs/debug.c pr_err("\tgc_lnum %u\n", le32_to_cpu(mst->gc_lnum)); pr_err 371 fs/ubifs/debug.c pr_err("\tihead_lnum %u\n", le32_to_cpu(mst->ihead_lnum)); pr_err 372 fs/ubifs/debug.c pr_err("\tihead_offs %u\n", le32_to_cpu(mst->ihead_offs)); pr_err 373 fs/ubifs/debug.c pr_err("\tindex_size %llu\n", pr_err 375 fs/ubifs/debug.c pr_err("\tlpt_lnum %u\n", le32_to_cpu(mst->lpt_lnum)); pr_err 376 fs/ubifs/debug.c pr_err("\tlpt_offs %u\n", le32_to_cpu(mst->lpt_offs)); pr_err 377 fs/ubifs/debug.c pr_err("\tnhead_lnum %u\n", le32_to_cpu(mst->nhead_lnum)); pr_err 378 fs/ubifs/debug.c pr_err("\tnhead_offs %u\n", le32_to_cpu(mst->nhead_offs)); pr_err 379 fs/ubifs/debug.c pr_err("\tltab_lnum %u\n", le32_to_cpu(mst->ltab_lnum)); pr_err 380 fs/ubifs/debug.c pr_err("\tltab_offs %u\n", le32_to_cpu(mst->ltab_offs)); pr_err 381 fs/ubifs/debug.c pr_err("\tlsave_lnum %u\n", le32_to_cpu(mst->lsave_lnum)); pr_err 382 fs/ubifs/debug.c pr_err("\tlsave_offs %u\n", le32_to_cpu(mst->lsave_offs)); pr_err 383 fs/ubifs/debug.c pr_err("\tlscan_lnum %u\n", le32_to_cpu(mst->lscan_lnum)); pr_err 384 fs/ubifs/debug.c pr_err("\tleb_cnt %u\n", le32_to_cpu(mst->leb_cnt)); pr_err 385 fs/ubifs/debug.c pr_err("\tempty_lebs %u\n", le32_to_cpu(mst->empty_lebs)); pr_err 386 fs/ubifs/debug.c pr_err("\tidx_lebs %u\n", le32_to_cpu(mst->idx_lebs)); pr_err 387 fs/ubifs/debug.c pr_err("\ttotal_free %llu\n", pr_err 389 fs/ubifs/debug.c pr_err("\ttotal_dirty %llu\n", pr_err 391 fs/ubifs/debug.c pr_err("\ttotal_used %llu\n", pr_err 393 fs/ubifs/debug.c pr_err("\ttotal_dead %llu\n", pr_err 395 fs/ubifs/debug.c pr_err("\ttotal_dark %llu\n", pr_err 403 fs/ubifs/debug.c pr_err("\tlnum %u\n", le32_to_cpu(ref->lnum)); pr_err 404 fs/ubifs/debug.c pr_err("\toffs %u\n", le32_to_cpu(ref->offs)); pr_err 405 fs/ubifs/debug.c pr_err("\tjhead %u\n", le32_to_cpu(ref->jhead)); pr_err 413 fs/ubifs/debug.c pr_err("\tkey %s\n", pr_err 415 fs/ubifs/debug.c pr_err("\tcreat_sqnum %llu\n", pr_err 417 fs/ubifs/debug.c pr_err("\tsize %llu\n", pr_err 419 fs/ubifs/debug.c pr_err("\tnlink %u\n", le32_to_cpu(ino->nlink)); pr_err 420 fs/ubifs/debug.c pr_err("\tatime %lld.%u\n", pr_err 423 fs/ubifs/debug.c pr_err("\tmtime %lld.%u\n", pr_err 426 fs/ubifs/debug.c pr_err("\tctime %lld.%u\n", pr_err 429 fs/ubifs/debug.c pr_err("\tuid %u\n", le32_to_cpu(ino->uid)); pr_err 430 fs/ubifs/debug.c pr_err("\tgid %u\n", le32_to_cpu(ino->gid)); pr_err 431 fs/ubifs/debug.c pr_err("\tmode %u\n", le32_to_cpu(ino->mode)); pr_err 432 fs/ubifs/debug.c pr_err("\tflags %#x\n", le32_to_cpu(ino->flags)); pr_err 433 fs/ubifs/debug.c pr_err("\txattr_cnt %u\n", le32_to_cpu(ino->xattr_cnt)); pr_err 434 fs/ubifs/debug.c pr_err("\txattr_size %u\n", le32_to_cpu(ino->xattr_size)); pr_err 435 fs/ubifs/debug.c pr_err("\txattr_names %u\n", le32_to_cpu(ino->xattr_names)); pr_err 436 fs/ubifs/debug.c pr_err("\tcompr_type %#x\n", pr_err 438 fs/ubifs/debug.c pr_err("\tdata len %u\n", le32_to_cpu(ino->data_len)); pr_err 448 fs/ubifs/debug.c pr_err("\tkey %s\n", pr_err 450 fs/ubifs/debug.c pr_err("\tinum %llu\n", pr_err 452 fs/ubifs/debug.c pr_err("\ttype %d\n", (int)dent->type); pr_err 453 fs/ubifs/debug.c pr_err("\tnlen %d\n", nlen); pr_err 454 fs/ubifs/debug.c pr_err("\tname "); pr_err 457 fs/ubifs/debug.c pr_err("(bad name length, not printing, bad or corrupted node)"); pr_err 473 fs/ubifs/debug.c pr_err("\tkey %s\n", pr_err 475 fs/ubifs/debug.c pr_err("\tsize %u\n", le32_to_cpu(dn->size)); pr_err 476 fs/ubifs/debug.c pr_err("\tcompr_typ %d\n", pr_err 478 fs/ubifs/debug.c pr_err("\tdata size %d\n", dlen); pr_err 479 fs/ubifs/debug.c pr_err("\tdata:\n"); pr_err 488 fs/ubifs/debug.c pr_err("\tinum %u\n", le32_to_cpu(trun->inum)); pr_err 489 fs/ubifs/debug.c pr_err("\told_size %llu\n", pr_err 491 fs/ubifs/debug.c pr_err("\tnew_size %llu\n", pr_err 500 fs/ubifs/debug.c pr_err("\tchild_cnt %d\n", n); pr_err 501 fs/ubifs/debug.c pr_err("\tlevel %d\n", (int)le16_to_cpu(idx->level)); pr_err 502 fs/ubifs/debug.c pr_err("\tBranches:\n"); pr_err 509 fs/ubifs/debug.c pr_err("\t%d: LEB %d:%d len %d key %s\n", pr_err 523 fs/ubifs/debug.c pr_err("\tcommit number %llu\n", pr_err 526 fs/ubifs/debug.c pr_err("\tlast node flag %llu\n", pr_err 529 fs/ubifs/debug.c pr_err("\t%d orphan inode numbers:\n", n); pr_err 531 fs/ubifs/debug.c pr_err("\t ino %llu\n", pr_err 540 fs/ubifs/debug.c pr_err("node type %d was not recognized\n", pr_err 549 fs/ubifs/debug.c pr_err("Budgeting request: new_ino %d, dirtied_ino %d\n", pr_err 551 fs/ubifs/debug.c pr_err("\tnew_ino_d %d, dirtied_ino_d %d\n", pr_err 553 fs/ubifs/debug.c pr_err("\tnew_page %d, dirtied_page %d\n", pr_err 555 fs/ubifs/debug.c pr_err("\tnew_dent %d, mod_dent %d\n", pr_err 557 fs/ubifs/debug.c pr_err("\tidx_growth %d\n", req->idx_growth); pr_err 558 fs/ubifs/debug.c pr_err("\tdata_growth %d dd_growth %d\n", pr_err 566 fs/ubifs/debug.c pr_err("(pid %d) Lprops statistics: empty_lebs %d, idx_lebs %d\n", pr_err 568 fs/ubifs/debug.c pr_err("\ttaken_empty_lebs %d, total_free %lld, total_dirty %lld\n", pr_err 570 fs/ubifs/debug.c pr_err("\ttotal_used %lld, total_dark %lld, total_dead %lld\n", pr_err 585 fs/ubifs/debug.c pr_err("(pid %d) Budgeting info: data budget sum %lld, total budget sum %lld\n", pr_err 588 fs/ubifs/debug.c pr_err("\tbudg_data_growth %lld, budg_dd_growth %lld, budg_idx_growth %lld\n", pr_err 590 fs/ubifs/debug.c pr_err("\tmin_idx_lebs %d, old_idx_sz %llu, uncommitted_idx %lld\n", pr_err 592 fs/ubifs/debug.c pr_err("\tpage_budget %d, inode_budget %d, dent_budget %d\n", pr_err 594 fs/ubifs/debug.c pr_err("\tnospace %u, nospace_rp %u\n", bi->nospace, bi->nospace_rp); pr_err 595 fs/ubifs/debug.c pr_err("\tdark_wm %d, dead_wm %d, max_idx_node_sz %d\n", pr_err 606 fs/ubifs/debug.c pr_err("\tfreeable_cnt %d, calc_idx_sz %lld, idx_gc_cnt %d\n", pr_err 608 fs/ubifs/debug.c pr_err("\tdirty_pg_cnt %ld, dirty_zn_cnt %ld, clean_zn_cnt %ld\n", pr_err 612 fs/ubifs/debug.c pr_err("\tgc_lnum %d, ihead_lnum %d\n", c->gc_lnum, c->ihead_lnum); pr_err 617 fs/ubifs/debug.c pr_err("\tjhead %s\t LEB %d\n", pr_err 622 fs/ubifs/debug.c pr_err("\tbud LEB %d\n", bud->lnum); pr_err 625 fs/ubifs/debug.c pr_err("\told bud LEB %d\n", bud->lnum); pr_err 627 fs/ubifs/debug.c pr_err("\tGC'ed idx LEB %d unmap %d\n", pr_err 629 fs/ubifs/debug.c pr_err("\tcommit state %d\n", c->cmt_state); pr_err 635 fs/ubifs/debug.c pr_err("Budgeting predictions:\n"); pr_err 636 fs/ubifs/debug.c pr_err("\tavailable: %lld, outstanding %lld, free %lld\n", pr_err 656 fs/ubifs/debug.c pr_err("LEB %-7d free %-8d dirty %-8d used %-8d free + dirty %-8d flags %#x (", pr_err 660 fs/ubifs/debug.c pr_err("LEB %-7d free %-8d dirty %-8d used %-8d free + dirty %-8d dark %-4d dead %-4d nodes fit %-3d flags %#-4x (", pr_err 740 fs/ubifs/debug.c pr_err("(pid %d) start dumping LEB properties\n", current->pid); pr_err 753 fs/ubifs/debug.c pr_err("(pid %d) finish dumping LEB properties\n", current->pid); pr_err 761 fs/ubifs/debug.c pr_err("(pid %d) dumping LPT information\n", current->pid); pr_err 762 fs/ubifs/debug.c pr_err("\tlpt_sz: %lld\n", c->lpt_sz); pr_err 763 fs/ubifs/debug.c pr_err("\tpnode_sz: %d\n", c->pnode_sz); pr_err 764 fs/ubifs/debug.c pr_err("\tnnode_sz: %d\n", c->nnode_sz); pr_err 765 fs/ubifs/debug.c pr_err("\tltab_sz: %d\n", c->ltab_sz); pr_err 766 fs/ubifs/debug.c pr_err("\tlsave_sz: %d\n", c->lsave_sz); pr_err 767 fs/ubifs/debug.c pr_err("\tbig_lpt: %d\n", c->big_lpt); pr_err 768 fs/ubifs/debug.c pr_err("\tlpt_hght: %d\n", c->lpt_hght); pr_err 769 fs/ubifs/debug.c pr_err("\tpnode_cnt: %d\n", c->pnode_cnt); pr_err 770 fs/ubifs/debug.c pr_err("\tnnode_cnt: %d\n", c->nnode_cnt); pr_err 771 fs/ubifs/debug.c pr_err("\tdirty_pn_cnt: %d\n", c->dirty_pn_cnt); pr_err 772 fs/ubifs/debug.c pr_err("\tdirty_nn_cnt: %d\n", c->dirty_nn_cnt); pr_err 773 fs/ubifs/debug.c pr_err("\tlsave_cnt: %d\n", c->lsave_cnt); pr_err 774 fs/ubifs/debug.c pr_err("\tspace_bits: %d\n", c->space_bits); pr_err 775 fs/ubifs/debug.c pr_err("\tlpt_lnum_bits: %d\n", c->lpt_lnum_bits); pr_err 776 fs/ubifs/debug.c pr_err("\tlpt_offs_bits: %d\n", c->lpt_offs_bits); pr_err 777 fs/ubifs/debug.c pr_err("\tlpt_spc_bits: %d\n", c->lpt_spc_bits); pr_err 778 fs/ubifs/debug.c pr_err("\tpcnt_bits: %d\n", c->pcnt_bits); pr_err 779 fs/ubifs/debug.c pr_err("\tlnum_bits: %d\n", c->lnum_bits); pr_err 780 fs/ubifs/debug.c pr_err("\tLPT root is at %d:%d\n", c->lpt_lnum, c->lpt_offs); pr_err 781 fs/ubifs/debug.c pr_err("\tLPT head is at %d:%d\n", pr_err 783 fs/ubifs/debug.c pr_err("\tLPT ltab is at %d:%d\n", c->ltab_lnum, c->ltab_offs); pr_err 785 fs/ubifs/debug.c pr_err("\tLPT lsave is at %d:%d\n", pr_err 788 fs/ubifs/debug.c pr_err("\tLPT LEB %d free %d dirty %d tgc %d cmt %d\n", pr_err 799 fs/ubifs/debug.c pr_err("(pid %d) start dumping scanned data from LEB %d:%d\n", pr_err 804 fs/ubifs/debug.c pr_err("Dumping node at LEB %d:%d len %d\n", pr_err 816 fs/ubifs/debug.c pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum); pr_err 830 fs/ubifs/debug.c pr_err("LEB %d has %d nodes ending at %d\n", lnum, pr_err 835 fs/ubifs/debug.c pr_err("Dumping node at LEB %d:%d len %d\n", lnum, pr_err 840 fs/ubifs/debug.c pr_err("(pid %d) finish dumping LEB %d\n", current->pid, lnum); pr_err 861 fs/ubifs/debug.c pr_err("znode %p, LEB %d:%d len %d parent %p iip %d level %d child_cnt %d flags %lx\n", pr_err 870 fs/ubifs/debug.c pr_err("zbranches:\n"); pr_err 874 fs/ubifs/debug.c pr_err("\t%d: znode %p LEB %d:%d len %d key %s\n", pr_err 879 fs/ubifs/debug.c pr_err("\t%d: LNC %p LEB %d:%d len %d key %s\n", pr_err 891 fs/ubifs/debug.c pr_err("(pid %d) start dumping heap cat %d (%d elements)\n", pr_err 896 fs/ubifs/debug.c pr_err("\t%d. LEB %d hpos %d free %d dirty %d flags %d\n", pr_err 900 fs/ubifs/debug.c pr_err("(pid %d) finish dumping heap\n", current->pid); pr_err 908 fs/ubifs/debug.c pr_err("(pid %d) dumping pnode:\n", current->pid); pr_err 909 fs/ubifs/debug.c pr_err("\taddress %zx parent %zx cnext %zx\n", pr_err 911 fs/ubifs/debug.c pr_err("\tflags %lu iip %d level %d num %d\n", pr_err 916 fs/ubifs/debug.c pr_err("\t%d: free %d dirty %d flags %d lnum %d\n", pr_err 926 fs/ubifs/debug.c pr_err("\n"); pr_err 927 fs/ubifs/debug.c pr_err("(pid %d) start dumping TNC tree\n", current->pid); pr_err 930 fs/ubifs/debug.c pr_err("== Level %d ==\n", level); pr_err 934 fs/ubifs/debug.c pr_err("== Level %d ==\n", level); pr_err 939 fs/ubifs/debug.c pr_err("(pid %d) finish dumping TNC tree\n", current->pid); pr_err 1847 fs/ubifs/lpt_commit.c pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum); pr_err 1865 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, pad %d bytes\n", pr_err 1872 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, free %d bytes\n", pr_err 1883 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, pnode num %d\n", pr_err 1886 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, pnode\n", lnum, offs); pr_err 1896 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, nnode num %d, ", pr_err 1899 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, nnode, ", pr_err 1903 fs/ubifs/lpt_commit.c pr_err("failed to unpack_node, error %d\n", pr_err 1918 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, ltab\n", lnum, offs); pr_err 1922 fs/ubifs/lpt_commit.c pr_err("LEB %d:%d, lsave len\n", lnum, offs); pr_err 1933 fs/ubifs/lpt_commit.c pr_err("(pid %d) finish dumping LEB %d\n", current->pid, lnum); pr_err 1950 fs/ubifs/lpt_commit.c pr_err("(pid %d) start dumping all LPT LEBs\n", current->pid); pr_err 1953 fs/ubifs/lpt_commit.c pr_err("(pid %d) finish dumping all LPT LEBs\n", current->pid); pr_err 33 fs/ubifs/misc.c pr_err("UBIFS error (ubi%d:%d pid %d): %ps: %pV\n", pr_err 2241 fs/ubifs/super.c pr_err("UBIFS error (pid: %d): cannot open \"%s\", error %d", pr_err 2374 fs/ubifs/super.c pr_err("UBIFS error (pid %d): VFS page cache size is %u bytes, but UBIFS requires at least 4096 bytes", pr_err 2398 fs/ubifs/super.c pr_err("UBIFS error (pid %d): cannot register file system, error %d", pr_err 205 fs/udf/directory.c pr_err("%s: invalidparms\n", __func__); pr_err 227 fs/udf/directory.c pr_err("%s: invalidparms\n", __func__); pr_err 596 fs/udf/super.c pr_err("bad mount option \"%s\" or missing value\n", p); pr_err 2328 fs/udf/super.c pr_err("error (device %s): %s: %pV", sb->s_id, function, &vaf); pr_err 188 fs/udf/unicode.c pr_err("unknown compression code (%u)\n", cmp_id); pr_err 197 fs/udf/unicode.c pr_err("incorrect filename length (%d)\n", ocu_len + 1); pr_err 453 fs/ufs/super.c pr_err("Unable to do repair on error, will lock lock instead\n"); pr_err 458 fs/ufs/super.c pr_err("Invalid option: \"%s\" or missing value\n", p); pr_err 801 fs/ufs/super.c pr_err("ufs was compiled with read-only support, can't be mounted as read-write\n"); pr_err 824 fs/ufs/super.c pr_err("wrong mount options\n"); pr_err 829 fs/ufs/super.c pr_err("You didn't specify the type of your ufs filesystem\n\n" pr_err 987 fs/ufs/super.c pr_err("unknown ufstype\n"); pr_err 993 fs/ufs/super.c pr_err("failed to set blocksize\n"); pr_err 1021 fs/ufs/super.c pr_err("this is not a 44bsd filesystem"); pr_err 1059 fs/ufs/super.c pr_err("%s(): bad magic number\n", __func__); pr_err 1073 fs/ufs/super.c pr_err("%s(): fragment size %u is not a power of 2\n", pr_err 1078 fs/ufs/super.c pr_err("%s(): fragment size %u is too small\n", pr_err 1083 fs/ufs/super.c pr_err("%s(): fragment size %u is too large\n", pr_err 1088 fs/ufs/super.c pr_err("%s(): block size %u is not a power of 2\n", pr_err 1093 fs/ufs/super.c pr_err("%s(): block size %u is too small\n", pr_err 1098 fs/ufs/super.c pr_err("%s(): too many fragments per block (%u)\n", pr_err 1138 fs/ufs/super.c pr_err("%s(): fs is active\n", __func__); pr_err 1142 fs/ufs/super.c pr_err("%s(): fs is bad\n", __func__); pr_err 1146 fs/ufs/super.c pr_err("%s(): can't grok fs_clean 0x%x\n", pr_err 1152 fs/ufs/super.c pr_err("%s(): fs needs fsck\n", __func__); pr_err 1337 fs/ufs/super.c pr_err("ufstype can't be changed during remount\n"); pr_err 1366 fs/ufs/super.c pr_err("ufs was compiled with read-only support, can't be mounted as read-write\n"); pr_err 1375 fs/ufs/super.c pr_err("this ufstype is read-only supported\n"); pr_err 1380 fs/ufs/super.c pr_err("failed during remounting\n"); pr_err 29 fs/unicode/utf8-selftest.c pr_err("test %s:%d Failed: %s%s", \ pr_err 32 fs/unicode/utf8-selftest.c pr_err(fmt, ##__VA_ARGS__); \ pr_err 171 fs/unicode/utf8-selftest.c pr_err("%s: Unable to load utf8-%d.%d.%d. Skipping.\n", pr_err 186 fs/unicode/utf8-selftest.c pr_err("can't create cursor\n"); pr_err 207 fs/unicode/utf8-selftest.c pr_err("%s: Unable to load utf8-%d.%d.%d. Skipping.\n", pr_err 222 fs/unicode/utf8-selftest.c pr_err("can't create cursor\n"); pr_err 241 fs/unicode/utf8-selftest.c pr_err("%s: Unable to load utf8 %d.%d.%d. Skipping.\n", pr_err 299 fs/unicode/utf8-selftest.c pr_err("%u out of %u tests failed\n", failed_tests, pr_err 122 fs/verity/signature.c pr_err("sysctl registration failed!\n"); pr_err 76 include/linux/bug.h pr_err(fmt, ##__VA_ARGS__); \ pr_err 941 include/linux/cpufreq.h pr_err("%s: Invalid relation: %d\n", __func__, relation); pr_err 536 include/linux/device-mapper.h #define DMERR(fmt, ...) pr_err(DM_FMT(fmt), ##__VA_ARGS__) pr_err 594 include/linux/dma-fence.h pr_err("f %llu#%llu: " fmt, __ff->context, __ff->seqno, \ pr_err 809 include/linux/fb.h pr_err("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__) pr_err 963 include/linux/filter.h pr_err("flen=%u proglen=%u pass=%u image=%pK from=%s pid=%d\n", flen, pr_err 59 include/linux/firmware/trusted_foundations.h pr_err("No support for Trusted Foundations, continuing in degraded mode.\n"); pr_err 60 include/linux/firmware/trusted_foundations.h pr_err("Secondary processors as well as CPU PM will be disabled.\n"); pr_err 62 include/linux/firmware/trusted_foundations.h pr_err("L2X0 cache will be kept disabled.\n"); pr_err 507 include/linux/kvm_host.h pr_err("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__) pr_err 259 include/linux/net.h net_ratelimited_function(pr_err, fmt, ##__VA_ARGS__) pr_err 1183 include/linux/qed/qed_if.h pr_err("[%s:%d(%s)]" fmt, \ pr_err 792 include/linux/tty.h #define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) pr_err 31 include/media/drv-intf/saa7146.h #define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__) pr_err 30 include/net/caif/caif_layer.h pr_err("caif:Assert detected:'%s'\n", #assert); \ pr_err 221 include/net/ip_vs.h pr_err(msg); \ pr_err 264 include/net/ip_vs.h pr_err(msg, ##__VA_ARGS__); \ pr_err 48 include/xen/hvm.h pr_err("Cannot get hvm parameter %s (%d): %d!\n", pr_err 164 init/do_mounts.c pr_err("VFS: PARTUUID= is invalid.\n" pr_err 167 init/do_mounts.c pr_err("Disabling rootwait; root= is invalid.\n"); pr_err 635 init/initramfs.c pr_err("/initrd.image: incomplete write (%zd != %ld)\n", pr_err 1061 init/main.c pr_err("Starting init: %s exists but couldn't execute it (error %d)\n", pr_err 1133 init/main.c pr_err("Failed to execute %s (error %d)\n", pr_err 1197 init/main.c pr_err("Warning: unable to open an initial console.\n"); pr_err 303 kernel/audit.c pr_err("%s\n", message); pr_err 1630 kernel/audit.c pr_err("audit: invalid 'audit' parameter value (%s)\n", str); pr_err 1637 kernel/audit.c pr_err("audit: error setting audit state (%d)\n", pr_err 794 kernel/audit_tree.c pr_err("cannot start thread audit_prune_tree"); pr_err 248 kernel/auditfilter.c pr_err("AUDIT_FILTER_ENTRY is deprecated\n"); pr_err 259 kernel/auditfilter.c pr_err("AUDIT_POSSIBLE is deprecated\n"); pr_err 2935 kernel/cgroup/cpuset.c pr_err("cpuset: failed to transfer tasks out of empty cpuset "); pr_err 1177 kernel/cpu.c pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n", pr_err 1180 kernel/cpu.c pr_err("please check additional_cpus= boot parameter\n"); pr_err 1252 kernel/cpu.c pr_err("Error taking CPU%d down: %d\n", cpu, error); pr_err 1260 kernel/cpu.c pr_err("Non-boot CPUs are not disabled\n"); pr_err 204 kernel/debug/debug_core.c pr_err("Critical breakpoint error, kernel memory destroyed at: %lx\n", pr_err 431 kernel/debug/debug_core.c pr_err("breakpoint remove failed: %lx\n", pr_err 1043 kernel/debug/debug_core.c pr_err("Another I/O driver is already registered with KGDB\n"); pr_err 312 kernel/dma/coherent.c pr_err("Reserved memory: failed to init DMA memory pool at %pa, size %ld MiB\n", pr_err 344 kernel/dma/coherent.c pr_err("Reserved memory: regions without no-map are not yet supported\n"); pr_err 53 kernel/dma/contiguous.c pr_err("Config string not provided\n"); pr_err 312 kernel/dma/contiguous.c pr_err("Reserved memory: incorrect alignment of CMA region\n"); pr_err 318 kernel/dma/contiguous.c pr_err("Reserved memory: unable to setup CMA region\n"); pr_err 619 kernel/dma/debug.c pr_err("cacheline tracking ENOMEM, dma-debug disabled\n"); pr_err 688 kernel/dma/debug.c pr_err("debugging out of memory - disabling\n"); pr_err 923 kernel/dma/debug.c pr_err("dma_debug_add_bus: out of memory\n"); pr_err 958 kernel/dma/debug.c pr_err("debugging out of memory error - disabled\n"); pr_err 170 kernel/dma/remap.c pr_err("DMA: failed to allocate %zu KiB pool for atomic coherent allocation\n", pr_err 130 kernel/hung_task.c pr_err("INFO: task %s:%d blocked for more than %ld seconds.\n", pr_err 132 kernel/hung_task.c pr_err(" %s %s %.*s\n", pr_err 136 kernel/hung_task.c pr_err("\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\"" pr_err 203 kernel/irq/irqdomain.c pr_err("Invalid fwnode type for irqdomain\n"); pr_err 624 kernel/irq/irqdomain.c pr_err("ERROR: no free irqs available below %i maximum\n", pr_err 803 kernel/irq/manage.c pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n", pr_err 1036 kernel/irq/manage.c pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n", pr_err 1375 kernel/irq/manage.c pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n", pr_err 1402 kernel/irq/manage.c pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n", pr_err 1496 kernel/irq/manage.c pr_err("Threaded irq requested with handler=NULL and !ONESHOT for irq %d\n", pr_err 1610 kernel/irq/manage.c pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n", pr_err 2571 kernel/irq/manage.c pr_err("Failed to setup NMI delivery: irq %u\n", irq); pr_err 744 kernel/irq/timings.c pr_err("Expected (%d) and computed (%d) next indexes differ\n", pr_err 777 kernel/irq/timings.c pr_err("Failed to allocate irq timings\n"); pr_err 797 kernel/irq/timings.c pr_err("Failed to store in the circular buffer\n"); pr_err 803 kernel/irq/timings.c pr_err("Count differs\n"); pr_err 85 kernel/kexec.c pr_err("Could not allocate control_code_buffer\n"); pr_err 92 kernel/kexec.c pr_err("Could not allocate swap buffer\n"); pr_err 339 kernel/kexec_elf.c pr_err("Not an ELF executable.\n"); pr_err 342 kernel/kexec_elf.c pr_err("No ELF program header.\n"); pr_err 353 kernel/kexec_elf.c pr_err("Requires an ELF interpreter.\n"); pr_err 123 kernel/kexec_file.c pr_err("RELA relocation unsupported.\n"); pr_err 140 kernel/kexec_file.c pr_err("REL relocation unsupported.\n"); pr_err 347 kernel/kexec_file.c pr_err("Could not allocate control_code_buffer\n"); pr_err 354 kernel/kexec_file.c pr_err("Could not allocate swap buffer\n"); pr_err 1145 kernel/kexec_file.c pr_err("symbol %s size mismatch: expected %lu actual %u\n", pr_err 1153 kernel/kexec_file.c pr_err("symbol %s is in a bss section. Cannot %s\n", name, pr_err 2140 kernel/kprobes.c pr_err("Dumping kprobe:\n"); pr_err 2141 kernel/kprobes.c pr_err("Name: %s\nOffset: %x\nAddress: %pS\n", pr_err 2286 kernel/kprobes.c pr_err("kprobes: failed to populate blacklist: %d\n", err); pr_err 2287 kernel/kprobes.c pr_err("Please take care of using kprobes.\n"); pr_err 177 kernel/livepatch/core.c pr_err("symbol '%s' not found in symbol table\n", name); pr_err 179 kernel/livepatch/core.c pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n", pr_err 182 kernel/livepatch/core.c pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n", pr_err 220 kernel/livepatch/core.c pr_err("symbol %s is not marked as a livepatch symbol\n", pr_err 230 kernel/livepatch/core.c pr_err("symbol %s has an incorrectly formatted name\n", pr_err 275 kernel/livepatch/core.c pr_err("section %s has an incorrectly formatted name\n", pr_err 747 kernel/livepatch/core.c pr_err("kallsyms size lookup failed for '%s'\n", pr_err 758 kernel/livepatch/core.c pr_err("kallsyms size lookup failed for '%s' replacement\n", pr_err 980 kernel/livepatch/core.c pr_err("module %s is not marked as a livepatch module\n", pr_err 187 kernel/livepatch/patch.c pr_err("failed to find location for function '%s'\n", pr_err 208 kernel/livepatch/patch.c pr_err("failed to set ftrace filter for function '%s' (%d)\n", pr_err 215 kernel/livepatch/patch.c pr_err("failed to register ftrace handler for function '%s' (%d)\n", pr_err 150 kernel/livepatch/shadow.c pr_err("Failed to construct shadow variable <%p, %lx> (%d)\n", pr_err 877 kernel/locking/lockdep.c pr_err("INFO: trying to register non-static key.\n"); pr_err 878 kernel/locking/lockdep.c pr_err("the code is fine but needs lockdep annotation.\n"); pr_err 879 kernel/locking/lockdep.c pr_err("turning off the locking correctness validator.\n"); pr_err 732 kernel/locking/locktorture.c pr_err("lock_torture_stats_print: Out of memory, need: %d", pr_err 744 kernel/locking/locktorture.c pr_err("lock_torture_stats_print: Out of memory, need: %d", pr_err 87 kernel/locking/test-ww_mutex.c pr_err("%s(flags=%x): mutual exclusion failure\n", pr_err 124 kernel/locking/test-ww_mutex.c pr_err("%s: trylocked itself!\n", __func__); pr_err 132 kernel/locking/test-ww_mutex.c pr_err("%s: missed deadlock for recursing, ret=%d\n", pr_err 223 kernel/locking/test-ww_mutex.c pr_err("%s: failed to resolve ABBA deadlock, A err=%d, B err=%d\n", pr_err 229 kernel/locking/test-ww_mutex.c pr_err("%s: missed ABBA deadlock, A err=%d, B err=%d\n", pr_err 316 kernel/locking/test-ww_mutex.c pr_err("cyclic deadlock not resolved, ret[%d/%d] = %d\n", pr_err 1419 kernel/module.c pr_err( pr_err 1824 kernel/module.c pr_err("%s: module sysfs not initialized\n", mod->name); pr_err 1831 kernel/module.c pr_err("%s: module is already loaded\n", mod->name); pr_err 2284 kernel/module.c pr_err("%s: exports duplicate symbol %s" pr_err 2959 kernel/module.c pr_err("%s: module is marked as livepatch module, but livepatch support is disabled", pr_err 3021 kernel/module.c pr_err("Module len %lu truncated\n", info->len); pr_err 3122 kernel/module.c pr_err("%s: version magic '%s' should be '%s'\n", pr_err 28 kernel/module_signature.c pr_err("%s: Module is not signed with expected PKCS#7 message\n", pr_err 40 kernel/module_signature.c pr_err("%s: PKCS#7 signature info has unexpected non-zero params\n", pr_err 198 kernel/params.c pr_err("%s: Unknown parameter `%s'\n", doing, param); pr_err 201 kernel/params.c pr_err("%s: `%s' too large for parameter `%s'\n", pr_err 205 kernel/params.c pr_err("%s: `%s' invalid for parameter `%s'\n", pr_err 248 kernel/params.c pr_err("%s: string parameter too long\n", kp->name); pr_err 418 kernel/params.c pr_err("%s: can only take %i arguments\n", name, max); pr_err 437 kernel/params.c pr_err("%s: needs at least %i arguments\n", name, min); pr_err 496 kernel/params.c pr_err("%s: string doesn't fit in %u chars.\n", pr_err 111 kernel/power/energy_model.c pr_err("pd%d: invalid cap. state: %d\n", cpu, ret); pr_err 120 kernel/power/energy_model.c pr_err("pd%d: non-increasing freq: %lu\n", cpu, freq); pr_err 129 kernel/power/energy_model.c pr_err("pd%d: invalid power: %lu\n", cpu, power); pr_err 228 kernel/power/energy_model.c pr_err("CPUs of %*pbl must have the same capacity\n", pr_err 280 kernel/power/hibernate.c pr_err("Some devices failed to power down, aborting hibernation\n"); pr_err 298 kernel/power/hibernate.c pr_err("Some system devices failed to power down, aborting hibernation\n"); pr_err 313 kernel/power/hibernate.c pr_err("Error %d creating hibernation image\n", error); pr_err 446 kernel/power/hibernate.c pr_err("Some devices failed to power down, aborting resume\n"); pr_err 637 kernel/power/hibernate.c pr_err("Swap will be unusable! Try swapon -a.\n"); pr_err 683 kernel/power/hibernate.c pr_err("Failed to load hibernation image, recovering.\n"); pr_err 90 kernel/power/process.c pr_err("Freezing of tasks %s after %d.%03d seconds " pr_err 151 kernel/power/qos.c pr_err("%s: bad qos param!\n", __func__); pr_err 156 kernel/power/qos.c pr_err("%s: Bad constraints on qos?\n", __func__); pr_err 643 kernel/power/qos.c pr_err("%s: %s setup failed\n", pr_err 1987 kernel/power/snapshot.c pr_err("Not enough free memory\n"); pr_err 1992 kernel/power/snapshot.c pr_err("Memory allocation failed\n"); pr_err 2187 kernel/power/snapshot.c pr_err("Image mismatch: %s\n", reason); pr_err 401 kernel/power/suspend.c pr_err("late suspend of devices failed\n"); pr_err 410 kernel/power/suspend.c pr_err("noirq suspend of devices failed\n"); pr_err 497 kernel/power/suspend.c pr_err("Some devices failed to suspend, or early wake event detected\n"); pr_err 276 kernel/power/swap.c pr_err("Adding page to bio failed at %llu\n", pr_err 322 kernel/power/swap.c pr_err("Swap header not found!\n"); pr_err 416 kernel/power/swap.c pr_err("Cannot find swap device, try swapon -a\n"); pr_err 694 kernel/power/swap.c pr_err("Failed to allocate LZO page\n"); pr_err 701 kernel/power/swap.c pr_err("Failed to allocate LZO data\n"); pr_err 710 kernel/power/swap.c pr_err("Failed to allocate crc\n"); pr_err 728 kernel/power/swap.c pr_err("Cannot start compression threads\n"); pr_err 750 kernel/power/swap.c pr_err("Cannot start CRC32 thread\n"); pr_err 811 kernel/power/swap.c pr_err("LZO compression failed\n"); pr_err 818 kernel/power/swap.c pr_err("Invalid LZO compressed length\n"); pr_err 912 kernel/power/swap.c pr_err("Cannot get swap writer\n"); pr_err 917 kernel/power/swap.c pr_err("Not enough free swap\n"); pr_err 1185 kernel/power/swap.c pr_err("Failed to allocate LZO page\n"); pr_err 1192 kernel/power/swap.c pr_err("Failed to allocate LZO data\n"); pr_err 1201 kernel/power/swap.c pr_err("Failed to allocate crc\n"); pr_err 1221 kernel/power/swap.c pr_err("Cannot start decompression threads\n"); pr_err 1243 kernel/power/swap.c pr_err("Cannot start CRC32 thread\n"); pr_err 1268 kernel/power/swap.c pr_err("Failed to allocate LZO pages\n"); pr_err 1340 kernel/power/swap.c pr_err("Invalid LZO compressed length\n"); pr_err 1391 kernel/power/swap.c pr_err("LZO decompression failed\n"); pr_err 1398 kernel/power/swap.c pr_err("Invalid LZO uncompressed length\n"); pr_err 1442 kernel/power/swap.c pr_err("Invalid image CRC32!\n"); pr_err 1580 kernel/power/swap.c pr_err("Cannot find swsusp signature!\n"); pr_err 28 kernel/printk/braille.c pr_err("need port name after brl=\n"); pr_err 1103 kernel/printk/printk.c pr_err("log_buf over 2G is not supported.\n"); pr_err 1194 kernel/printk/printk.c pr_err("log_buf_len: %lu bytes not available\n", pr_err 104 kernel/range.c pr_err("%s: run out of slot in ranges\n", pr_err 2066 kernel/rcu/rcutorture.c pr_err("barrier_cbs_invoked = %d, n_barrier_cbs = %d\n", pr_err 483 kernel/rcu/tree_exp.h pr_err("INFO: %s detected expedited stalls on CPUs/tasks: {", pr_err 507 kernel/rcu/tree_exp.h pr_err("blocking rcu_node structures:"); pr_err 206 kernel/rcu/tree_stall.h pr_err("\tTasks blocked on level-%d rcu_node (CPUs %d-%d):", pr_err 316 kernel/rcu/tree_stall.h pr_err("\t%d-%c%c%c%c: (%lu %s) idle=%03x/%ld/%#lx softirq=%u/%u fqs=%ld %s\n", pr_err 340 kernel/rcu/tree_stall.h pr_err("%s kthread starved for %ld jiffies! g%ld f%#x %s(%d) ->state=%#lx ->cpu=%d\n", pr_err 347 kernel/rcu/tree_stall.h pr_err("RCU grace-period kthread stack dump:\n"); pr_err 374 kernel/rcu/tree_stall.h pr_err("INFO: %s detected stalls on CPUs/tasks:\n", rcu_state.name); pr_err 401 kernel/rcu/tree_stall.h pr_err("INFO: Stall ended before state dump start\n"); pr_err 405 kernel/rcu/tree_stall.h pr_err("All QSes seen, last %s kthread activity %ld (%ld-%ld), jiffies_till_next_fqs=%ld, root ->qsmask %#lx\n", pr_err 443 kernel/rcu/tree_stall.h pr_err("INFO: %s self-detected stall on CPU\n", rcu_state.name); pr_err 617 kernel/rcu/update.c pr_err("INFO: rcu_tasks detected stalls on tasks:\n"); pr_err 533 kernel/relay.c pr_err("relay: cpu %d buffer creation failed\n", cpu); pr_err 1063 kernel/resource.c pr_err("requested range [0x%llx-0x%llx] not in root %pr\n", pr_err 1073 kernel/resource.c pr_err("fixing request to [0x%llx-0x%llx]\n", pr_err 3859 kernel/sched/core.c pr_err("Preemption disabled at:"); pr_err 6785 kernel/sched/core.c pr_err("Preemption disabled at:"); pr_err 684 kernel/sched/cpufreq_schedutil.c pr_err("failed to create sugov thread: %ld\n", PTR_ERR(thread)); pr_err 809 kernel/sched/cpufreq_schedutil.c pr_err("initialization failed (error %d)\n", ret); pr_err 1868 kernel/sched/topology.c pr_err("BUG: arch topology borken\n"); pr_err 1870 kernel/sched/topology.c pr_err(" the %s domain not a subset of the %s domain\n", pr_err 58 kernel/smpboot.c pr_err("SMP: fork_idle() failed for CPU %u\n", cpu); pr_err 295 kernel/softirq.c pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n", pr_err 30 kernel/test_kprobes.c pr_err("pre-handler is preemptible\n"); pr_err 41 kernel/test_kprobes.c pr_err("post-handler is preemptible\n"); pr_err 45 kernel/test_kprobes.c pr_err("incorrect value in post_handler\n"); pr_err 62 kernel/test_kprobes.c pr_err("register_kprobe returned %d\n", ret); pr_err 70 kernel/test_kprobes.c pr_err("kprobe pre_handler not called\n"); pr_err 75 kernel/test_kprobes.c pr_err("kprobe post_handler not called\n"); pr_err 98 kernel/test_kprobes.c pr_err("incorrect value in post_handler2\n"); pr_err 119 kernel/test_kprobes.c pr_err("register_kprobes returned %d\n", ret); pr_err 128 kernel/test_kprobes.c pr_err("kprobe pre_handler not called\n"); pr_err 133 kernel/test_kprobes.c pr_err("kprobe post_handler not called\n"); pr_err 142 kernel/test_kprobes.c pr_err("kprobe pre_handler2 not called\n"); pr_err 147 kernel/test_kprobes.c pr_err("kprobe post_handler2 not called\n"); pr_err 163 kernel/test_kprobes.c pr_err("kretprobe entry handler is preemptible\n"); pr_err 175 kernel/test_kprobes.c pr_err("kretprobe return handler is preemptible\n"); pr_err 179 kernel/test_kprobes.c pr_err("incorrect value in kretprobe handler\n"); pr_err 183 kernel/test_kprobes.c pr_err("call to kretprobe entry handler failed\n"); pr_err 202 kernel/test_kprobes.c pr_err("register_kretprobe returned %d\n", ret); pr_err 209 kernel/test_kprobes.c pr_err("kretprobe handler not called\n"); pr_err 222 kernel/test_kprobes.c pr_err("incorrect value in kretprobe handler2\n"); pr_err 226 kernel/test_kprobes.c pr_err("call to kretprobe entry handler failed\n"); pr_err 249 kernel/test_kprobes.c pr_err("register_kretprobe returned %d\n", ret); pr_err 256 kernel/test_kprobes.c pr_err("kretprobe handler not called\n"); pr_err 263 kernel/test_kprobes.c pr_err("kretprobe handler2 not called\n"); pr_err 306 kernel/test_kprobes.c pr_err("BUG: %d out of %d tests failed\n", errors, num_tests); pr_err 308 kernel/test_kprobes.c pr_err("BUG: %d error(s) running handlers\n", handler_errors); pr_err 171 kernel/time/posix-clock.c pr_err("%s unable to add device %d:%d\n", pr_err 2390 kernel/trace/trace_events.c pr_err("%s: module has bad taint, not creating trace events\n", pr_err 200 kernel/trace/trace_hwlat.c pr_err(BANNER "time running backwards\n"); pr_err 212 kernel/trace/trace_hwlat.c pr_err("Time total overflowed\n"); pr_err 222 kernel/trace/trace_hwlat.c pr_err(BANNER "time running backwards\n"); pr_err 369 kernel/trace/trace_hwlat.c pr_err(BANNER "could not start sampling thread\n"); pr_err 566 kernel/trace/trace_hwlat.c pr_err(BANNER "Cannot start hwlat kthread\n"); pr_err 2282 kernel/workqueue.c pr_err("BUG: workqueue leaked lock or atomic: %s/0x%08x/%d\n" pr_err 285 lib/842/842_compress.c pr_err("Invalid templ %x op %d : %x %x %x %x\n", pr_err 294 lib/842/842_compress.c pr_err("Invalid template %x len %x : %x %x %x %x\n", pr_err 505 lib/842/842_compress.c pr_err("Using strict mode, can't compress len %d\n", ilen); pr_err 248 lib/842/842_decompress.c pr_err("Internal error, invalid op %x\n", op); pr_err 374 lib/asn1_decoder.c pr_err("ASN.1 decoder error: Stacks not empty at completion (%u, %u)\n", pr_err 472 lib/asn1_decoder.c pr_err("ASN.1 decoder error: Found reserved opcode (%u) pc=%zu\n", pr_err 230 lib/digsig.c pr_err("key not found, id: %s\n", name); pr_err 263 lib/digsig.c pr_err("shash allocation failed\n"); pr_err 242 lib/dynamic_debug.c pr_err("unclosed quote: %s\n", buf); pr_err 253 lib/dynamic_debug.c pr_err("too many words, legal max <=%d\n", maxwords); pr_err 286 lib/dynamic_debug.c pr_err("bad line-number: %s\n", str); pr_err 298 lib/dynamic_debug.c pr_err("match-spec:%s val:%s overridden by %s\n", pr_err 328 lib/dynamic_debug.c pr_err("expecting pairs of match-spec <value>\n"); pr_err 353 lib/dynamic_debug.c pr_err("match-spec: line used 2x\n"); pr_err 370 lib/dynamic_debug.c pr_err("last-line:%d < 1st-line:%d\n", pr_err 379 lib/dynamic_debug.c pr_err("unknown keyword \"%s\"\n", words[i]); pr_err 408 lib/dynamic_debug.c pr_err("bad flag-op %c, at start of %s\n", *str, str); pr_err 421 lib/dynamic_debug.c pr_err("unknown flag '%c' in \"%s\"\n", *str, str); pr_err 456 lib/dynamic_debug.c pr_err("tokenize failed\n"); pr_err 461 lib/dynamic_debug.c pr_err("flags parse failed\n"); pr_err 465 lib/dynamic_debug.c pr_err("query parse failed\n"); pr_err 890 lib/dynamic_debug.c pr_err("error adding module: %s\n", name); pr_err 71 lib/error-inject.c pr_err("Failed to find error inject entry at %p\n", pr_err 47 lib/find_bit_benchmark.c pr_err("find_first_bit: %18llu ns, %6ld iterations\n", time, cnt); pr_err 61 lib/find_bit_benchmark.c pr_err("find_next_bit: %18llu ns, %6ld iterations\n", time, cnt); pr_err 75 lib/find_bit_benchmark.c pr_err("find_next_zero_bit: %18llu ns, %6ld iterations\n", time, cnt); pr_err 94 lib/find_bit_benchmark.c pr_err("find_last_bit: %18llu ns, %6ld iterations\n", time, cnt); pr_err 109 lib/find_bit_benchmark.c pr_err("find_next_and_bit: %18llu ns, %6ld iterations\n", time, cnt); pr_err 118 lib/find_bit_benchmark.c pr_err("\nStart testing find_bit() with random-filled bitmap\n"); pr_err 134 lib/find_bit_benchmark.c pr_err("\nStart testing find_bit() with sparse bitmap\n"); pr_err 263 lib/kobject.c pr_err("%s failed for %s with -EEXIST, don't try to register things with the same name in the same directory.\n", pr_err 266 lib/kobject.c pr_err("%s failed for %s (error: %d parent: %s)\n", pr_err 363 lib/kobject.c pr_err("kobject (%p): tried to init an initialized object, something is seriously wrong.\n", pr_err 373 lib/kobject.c pr_err("kobject (%p): %s\n", kobj, err_str); pr_err 386 lib/kobject.c pr_err("kobject: can not set name properly!\n"); pr_err 436 lib/kobject.c pr_err("kobject '%s' (%p): tried to add an uninitialized object, something is seriously wrong.\n", pr_err 771 lib/kobject_uevent.c pr_err("kobject_uevent: unable to create netlink socket!\n"); pr_err 154 lib/logic_pio.c pr_err("PIO entry token 0x%lx invalid\n", pio); pr_err 194 lib/logic_pio.c pr_err("IO range not found or invalid\n"); pr_err 198 lib/logic_pio.c pr_err("resource size %pa cannot fit in IO range size %pa\n", pr_err 224 lib/logic_pio.c pr_err("addr %pa not registered in io_range_list\n", &addr); pr_err 276 lib/math/prime_numbers.c pr_err("inconsistent result for is-prime(%lu): slow=%s, fast=%s!", pr_err 285 lib/math/prime_numbers.c pr_err("incorrect result for next-prime(%lu): expected %lu, got %lu", pr_err 143 lib/raid6/algos.c pr_err("raid6: Yikes! No recovery algorithm found!\n"); pr_err 220 lib/raid6/algos.c pr_err("raid6: Yikes! No algorithm found!\n"); pr_err 246 lib/raid6/algos.c pr_err("raid6: Yikes! No memory available.\n"); pr_err 74 lib/stmp_device.c pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); pr_err 30 lib/test_bitmap.c pr_err("[%s:%u] expected %u, got %u\n", pr_err 313 lib/test_bitmap.c pr_err("parselist%s: %d: input is %s, errno is %d, expected %d\n", pr_err 320 lib/test_bitmap.c pr_err("parselist%s: %d: input is %s, result is 0x%lx, expected 0x%lx\n", pr_err 327 lib/test_bitmap.c pr_err("parselist%s: %d: input is '%s' OK, Time: %llu\n", pr_err 360 lib/test_bitmap.c pr_err("bitmap_copy_arr32(nbits == %d:" pr_err 85 lib/test_blackhole_dev.c pr_err("dev_queue_xmit() returned UNKNOWN(%d)\n", ret); pr_err 6742 lib/test_bpf.c pr_err("test_bpf: invalid test_id specified.\n"); pr_err 6756 lib/test_bpf.c pr_err("test_bpf: no test named '%s' found.\n", pr_err 6769 lib/test_bpf.c pr_err("test_bpf: test_range is out of bound.\n"); pr_err 6774 lib/test_bpf.c pr_err("test_bpf: test_range is ending before it starts.\n"); pr_err 210 lib/test_firmware.c pr_err("could not alloc settings for config trigger: %d\n", pr_err 383 lib/test_firmware.c pr_err("Must call release_all_firmware prior to changing config\n"); pr_err 550 lib/test_firmware.c pr_err("failed to async load firmware\n"); pr_err 594 lib/test_firmware.c pr_err("failed to async load firmware\n"); pr_err 688 lib/test_firmware.c pr_err("Setting up thread %u failed\n", req->idx); pr_err 867 lib/test_firmware.c pr_err("#%u: failed to async load firmware\n", idx); pr_err 875 lib/test_firmware.c pr_err("Testing interface must use PAGE_SIZE firmware for now\n"); pr_err 937 lib/test_firmware.c pr_err("could not init firmware test config: %d\n", rc); pr_err 944 lib/test_firmware.c pr_err("could not register misc device: %d\n", rc); pr_err 80 lib/test_hash.c pr_err("__hash_32(%#x) = %#x != __hash_32_generic() = %#x", pr_err 94 lib/test_hash.c pr_err("hash_32(%#x, %d) = %#x > %#x", h0, k, h1, m); pr_err 101 lib/test_hash.c pr_err("hash_32(%#x, %d) = %#x != hash_32_generic() " pr_err 107 lib/test_hash.c pr_err("hash_32_generic(%#x, %d) = %#x > %#x", pr_err 116 lib/test_hash.c pr_err("hash_64(%#llx, %d) = %#x > %#x", h64, k, h1, m); pr_err 123 lib/test_hash.c pr_err("hash_64(%#llx, %d) = %#x != hash_64_generic() " pr_err 129 lib/test_hash.c pr_err("hash_64_generic(%#llx, %d) = %#x > %#x", pr_err 164 lib/test_hash.c pr_err("hashlen_string(%d..%d) returned length" pr_err 171 lib/test_hash.c pr_err("hashlen_string(%d..%d) = %08x != " pr_err 187 lib/test_hash.c pr_err("OR of all string hash results = %#x != %#x", pr_err 192 lib/test_hash.c pr_err("OR of all __hash_32 results = %#x != %#x", pr_err 199 lib/test_hash.c pr_err("OR of all __hash_32_generic results = %#x != %#x", pr_err 211 lib/test_hash.c pr_err("OR of all hash_32(%d) results = %#x " pr_err 216 lib/test_hash.c pr_err("OR of all hash_64(%d) results = %#x " pr_err 142 lib/test_hexdump.c pr_err("Len: %zu row: %d group: %d\n", len, rowsize, groupsize); pr_err 143 lib/test_hexdump.c pr_err("Result: '%s'\n", real); pr_err 144 lib/test_hexdump.c pr_err("Expect: '%s'\n", test); pr_err 200 lib/test_hexdump.c pr_err("Len: %zu buflen: %zu strlen: %zu\n", pr_err 202 lib/test_hexdump.c pr_err("Result: %d '%s'\n", r, buf); pr_err 203 lib/test_hexdump.c pr_err("Expect: %d '%s'\n", e, test); pr_err 243 lib/test_hexdump.c pr_err("failed %u out of %u tests\n", failed_tests, total_tests); pr_err 38 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 54 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 70 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 90 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 106 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 122 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 140 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 158 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 178 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 196 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 214 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 230 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 247 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 263 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 279 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 295 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 311 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 327 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 334 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 340 lib/test_kasan.c pr_err("Could not detect use-after-free: ptr1 == ptr2\n"); pr_err 354 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 372 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 388 lib/test_kasan.c pr_err("Cache allocation failed\n"); pr_err 394 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 413 lib/test_kasan.c pr_err("Cache allocation failed\n"); pr_err 464 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 490 lib/test_kasan.c pr_err("Failed to allocate user memory\n"); pr_err 548 lib/test_kasan.c pr_err("Cache allocation failed\n"); pr_err 554 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 573 lib/test_kasan.c pr_err("Cache allocation failed\n"); pr_err 579 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 744 lib/test_kasan.c pr_err("Allocation failed\n"); pr_err 1098 lib/test_kmod.c pr_err("Cannot alloc kmod_config_init()\n"); pr_err 1108 lib/test_kmod.c pr_err("Cannot alloc misc_dev->name\n"); pr_err 1146 lib/test_kmod.c pr_err("reached limit of number of test devices\n"); pr_err 1156 lib/test_kmod.c pr_err("could not register misc device: %d\n", ret); pr_err 1181 lib/test_kmod.c pr_err("Cannot add first test kmod device\n"); pr_err 35 lib/test_list_sort.c pr_err("error: incorrect serial %d\n", ela->serial); pr_err 39 lib/test_list_sort.c pr_err("error: incorrect serial %d\n", elb->serial); pr_err 43 lib/test_list_sort.c pr_err("error: phantom element\n"); pr_err 47 lib/test_list_sort.c pr_err("error: bad poison: %#x/%#x\n", pr_err 52 lib/test_list_sort.c pr_err("error: bad poison: %#x/%#x\n", pr_err 105 lib/test_list_sort.c pr_err("error: list is corrupted\n"); pr_err 111 lib/test_list_sort.c pr_err("error: list is not sorted\n"); pr_err 118 lib/test_list_sort.c pr_err("error: order of equivalent elements not " pr_err 124 lib/test_list_sort.c pr_err("error: element check failed\n"); pr_err 130 lib/test_list_sort.c pr_err("error: list is corrupted\n"); pr_err 136 lib/test_list_sort.c pr_err("error: bad list length %d", count); pr_err 65 lib/test_memcat_p.c pr_err("test failed: wrong magic at %d: %u\n", i, pr_err 72 lib/test_memcat_p.c pr_err("test failed: expected zero total, got %d\n", total); pr_err 77 lib/test_memcat_p.c pr_err("test failed: expected output size %d, got %d\n", pr_err 84 lib/test_memcat_p.c pr_err("test failed: wrong element order at %d\n", i); pr_err 57 lib/test_objagg.c pr_err("Key %u: Failed to get object.\n", key_id); pr_err 63 lib/test_objagg.c pr_err("Key %u: God another object for the same key.\n", pr_err 165 lib/test_objagg.c pr_err("Key %u: Failed to get object.\n", key_id); pr_err 170 lib/test_objagg.c pr_err("Key %u: Root was not created\n", key_id); pr_err 176 lib/test_objagg.c pr_err("Key %u: Root was incorrectly created\n", pr_err 184 lib/test_objagg.c pr_err("Key %u: Root has unexpected key id\n", key_id); pr_err 190 lib/test_objagg.c pr_err("Key %u: Buffer does not match the expected content\n", pr_err 213 lib/test_objagg.c pr_err("Key %u: Root was not destroyed\n", key_id); pr_err 218 lib/test_objagg.c pr_err("Key %u: Root was incorrectly destroyed\n", pr_err 236 lib/test_objagg.c pr_err("Stats: Object count is not zero while it should be\n"); pr_err 255 lib/test_objagg.c pr_err("Stats: Unexpected object count (%u expected, %u returned)\n", pr_err 263 lib/test_objagg.c pr_err("Stats: incorrect user count\n"); pr_err 268 lib/test_objagg.c pr_err("Stats: incorrect delta user count\n"); pr_err 571 lib/test_objagg.c pr_err("Key %u: Delta count changed while expected to remain the same.\n", pr_err 580 lib/test_objagg.c pr_err("Key %u: Delta count was not incremented.\n", pr_err 589 lib/test_objagg.c pr_err("Key %u: Delta count was not decremented.\n", pr_err 599 lib/test_objagg.c pr_err("Key %u: Root count changed while expected to remain the same.\n", pr_err 608 lib/test_objagg.c pr_err("Key %u: Root count was not incremented.\n", pr_err 617 lib/test_objagg.c pr_err("Key %u: Root count was not decremented.\n", pr_err 793 lib/test_objagg.c pr_err("Key %u: Stats: %s\n", action_item->key_id, errmsg); pr_err 937 lib/test_objagg.c pr_err("Stats: %s\n", errmsg); pr_err 951 lib/test_objagg.c pr_err("Hints stats: %s\n", errmsg); pr_err 972 lib/test_objagg.c pr_err("Stats2: %s\n", errmsg); pr_err 309 lib/test_parman.c pr_err("Array limit is lower than the base count (%lu < %lu)\n", pr_err 322 lib/test_parman.c pr_err("Gap found in array even though they are forbidden\n"); pr_err 330 lib/test_parman.c pr_err("Item belongs under higher priority then the last one (current: %lu, previous: %lu)\n", pr_err 337 lib/test_parman.c pr_err("Item has different index in compare to where it actually is (%lu != %d)\n", pr_err 344 lib/test_parman.c pr_err("Number of used items in array does not match (%u != %u)\n", pr_err 350 lib/test_parman.c pr_err("Number of unused item at the end of array is bigger than resize step (%u >= %lu)\n", pr_err 99 lib/test_printf.c pr_err("error in test suite: expected output length %d too long. Format was '%s'.\n", pr_err 615 lib/test_rhashtable.c pr_err(" found unexpected object %d-%d\n", key.tid, key.id); pr_err 618 lib/test_rhashtable.c pr_err(" object %d-%d not found!\n", key.tid, key.id); pr_err 621 lib/test_rhashtable.c pr_err(" wrong object returned (got %d-%d, expected %d-%d)\n", pr_err 639 lib/test_rhashtable.c pr_err(" thread[%d]: interrupted\n", tdata->id); pr_err 650 lib/test_rhashtable.c pr_err(" thread[%d]: rhashtable_insert_fast failed\n", pr_err 661 lib/test_rhashtable.c pr_err(" thread[%d]: rhashtable_lookup_test failed\n", pr_err 673 lib/test_rhashtable.c pr_err(" thread[%d]: rhashtable_remove_fast failed\n", pr_err 683 lib/test_rhashtable.c pr_err(" thread[%d]: rhashtable_lookup_test (2) failed\n", pr_err 787 lib/test_rhashtable.c pr_err(" kthread_run failed for thread %d\n", i); pr_err 794 lib/test_rhashtable.c pr_err(" wait_event interruptible failed\n"); pr_err 33 lib/test_sort.c pr_err("test has failed\n"); pr_err 118 lib/test_stackinit.c pr_err(#name ": leaf fill was not 0xFF!?\n"); \ pr_err 130 lib/test_stackinit.c pr_err(#name ": stack fill missed target!?\n"); \ pr_err 131 lib/test_stackinit.c pr_err(#name ": fill %zu wide\n", fill_size); \ pr_err 132 lib/test_stackinit.c pr_err(#name ": target offset by %d\n", \ pr_err 377 lib/test_stackinit.c pr_err("failures: %u\n", failures); pr_err 43 lib/test_strscpy.c pr_err("null source string not supported\n"); pr_err 52 lib/test_strscpy.c pr_err("count (%d) is too big (%d) ... aborting", count, max_count); pr_err 62 lib/test_strscpy.c pr_err("%d != %d (written, expected)\n", written, expected); pr_err 68 lib/test_strscpy.c pr_err("buffer state invalid for -E2BIG\n"); pr_err 72 lib/test_strscpy.c pr_err("too big string is not null terminated correctly\n"); pr_err 79 lib/test_strscpy.c pr_err("buf[i]==%c != src[i]==%c\n", buf[i], src[i]); pr_err 86 lib/test_strscpy.c pr_err("string is not null terminated correctly\n"); pr_err 94 lib/test_strscpy.c pr_err("padding missing at index: %d\n", i); pr_err 103 lib/test_strscpy.c pr_err("poison value missing at index: %d\n", i); pr_err 48 lib/test_uuid.c pr_err("%s test #%u %s %s data: '%s'\n", pr_err 55 lib/test_uuid.c pr_err("%s test #%u actual data: '%s'\n", pr_err 120 lib/test_uuid.c pr_err("failed %u out of %u tests\n", failed_tests, total_tests); pr_err 392 lib/test_vmalloc.c pr_err("Failed to set affinity to %d CPU\n", t->cpu); pr_err 491 lib/test_vmalloc.c pr_err("Failed to start kthread for %d CPU\n", cpu); pr_err 51 lib/ubsan.c pr_err("%s %s:%d:%d\n", prefix, loc->file_name, pr_err 147 lib/ubsan.c pr_err("========================================" pr_err 155 lib/ubsan.c pr_err("========================================" pr_err 176 lib/ubsan.c pr_err("%s integer overflow:\n", pr_err 178 lib/ubsan.c pr_err("%s %c %s cannot be represented in type %s\n", pr_err 221 lib/ubsan.c pr_err("negation of %s cannot be represented in type %s:\n", pr_err 242 lib/ubsan.c pr_err("division of %s by -1 cannot be represented in type %s\n", pr_err 245 lib/ubsan.c pr_err("division by zero\n"); pr_err 258 lib/ubsan.c pr_err("%s null pointer of type %s\n", pr_err 273 lib/ubsan.c pr_err("%s misaligned address %p for type %s\n", pr_err 276 lib/ubsan.c pr_err("which requires %ld byte alignment\n", data->alignment); pr_err 288 lib/ubsan.c pr_err("%s address %p with insufficient space\n", pr_err 291 lib/ubsan.c pr_err("for an object of type %s\n", data->type->type_name); pr_err 349 lib/ubsan.c pr_err("index %s is out of range for type %s\n", index_str, pr_err 373 lib/ubsan.c pr_err("shift exponent %s is negative\n", rhs_str); pr_err 377 lib/ubsan.c pr_err("shift exponent %s is too large for %u-bit type %s\n", pr_err 382 lib/ubsan.c pr_err("left shift of negative value %s\n", pr_err 385 lib/ubsan.c pr_err("left shift of %s by %s places cannot be" pr_err 400 lib/ubsan.c pr_err("calling __builtin_unreachable()\n"); pr_err 418 lib/ubsan.c pr_err("load of value %s is not a valid value for type %s\n", pr_err 141 mm/cma.c pr_err("CMA area %s could not be activated\n", cma->name); pr_err 184 mm/cma.c pr_err("Not enough slots for CMA reserved regions!\n"); pr_err 263 mm/cma.c pr_err("Not enough slots for CMA reserved regions!\n"); pr_err 283 mm/cma.c pr_err("Region at %pa must be aligned to %pa bytes\n", pr_err 304 mm/cma.c pr_err("Region at %pa defined on low/high memory boundary (%pa)\n", pr_err 319 mm/cma.c pr_err("Size (%pa) of region at %pa exceeds limit (%pa)\n", pr_err 374 mm/cma.c pr_err("Failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); pr_err 495 mm/cma.c pr_err("%s: alloc failed, req-size: %zu pages, ret: %d\n", pr_err 2672 mm/compaction.c pr_err("Failed to start kcompactd on node %d\n", nid); pr_err 2725 mm/compaction.c pr_err("kcompactd: failed to register hotplug callbacks.\n"); pr_err 223 mm/debug.c pr_err("vm_debug option '%c' unknown. skipped\n", pr_err 296 mm/dmapool.c pr_err("dma_pool_destroy %s, %p busy\n", pr_err 364 mm/dmapool.c pr_err("dma_pool_alloc %s, %p (corrupted)\n", pr_err 425 mm/dmapool.c pr_err("dma_pool_free %s, %p/%lx (bad dma)\n", pr_err 441 mm/dmapool.c pr_err("dma_pool_free %s, %p (bad vaddr)/%pad\n", pr_err 457 mm/dmapool.c pr_err("dma_pool_free %s, dma %pad already free\n", pr_err 348 mm/huge_memory.c pr_err("failed to create transparent hugepage kobject\n"); pr_err 354 mm/huge_memory.c pr_err("failed to register transparent hugepage group\n"); pr_err 360 mm/huge_memory.c pr_err("failed to register transparent hugepage group\n"); pr_err 2796 mm/hugetlb.c pr_err("Hugetlb: Unable to add hstate %s", h->name); pr_err 2900 mm/hugetlb.c pr_err("Hugetlb: Unable to add hstate %s for node %d\n", pr_err 2953 mm/hugetlb.c pr_err("HugeTLB: unsupported default_hugepagesz %lu. Reverting to %lu\n", pr_err 71 mm/kasan/report.c pr_err("BUG: KASAN: %s in %pS\n", pr_err 73 mm/kasan/report.c pr_err("%s of size %zu at addr %px by task %s/%d\n", pr_err 87 mm/kasan/report.c pr_err("==================================================================\n"); pr_err 92 mm/kasan/report.c pr_err("==================================================================\n"); pr_err 102 mm/kasan/report.c pr_err("%s by task %u:\n", prefix, track->pid); pr_err 110 mm/kasan/report.c pr_err("(stack is not available)\n"); pr_err 130 mm/kasan/report.c pr_err("The buggy address belongs to the object at %px\n" pr_err 148 mm/kasan/report.c pr_err("The buggy address is located %d bytes %s of\n" pr_err 183 mm/kasan/report.c pr_err("\n"); pr_err 186 mm/kasan/report.c pr_err("\n"); pr_err 221 mm/kasan/report.c pr_err("KASAN internal error: frame description too long: %s\n", pr_err 234 mm/kasan/report.c pr_err("KASAN internal error: not a valid number: %s\n", token); pr_err 258 mm/kasan/report.c pr_err("\n"); pr_err 259 mm/kasan/report.c pr_err("this frame has %lu %s:\n", num_objects, pr_err 286 mm/kasan/report.c pr_err(" [%lu, %lu) '%s'", offset, offset + size, token); pr_err 330 mm/kasan/report.c pr_err("KASAN internal error: frame info validation failed; invalid marker: %lu\n", pr_err 359 mm/kasan/report.c pr_err("\n"); pr_err 360 mm/kasan/report.c pr_err("addr %px is located in stack of task %s/%d at offset %lu in frame:\n", pr_err 362 mm/kasan/report.c pr_err(" %pS\n", frame_pc); pr_err 375 mm/kasan/report.c pr_err("\n"); pr_err 385 mm/kasan/report.c pr_err("The buggy address belongs to the variable:\n"); pr_err 386 mm/kasan/report.c pr_err(" %pS\n", addr); pr_err 390 mm/kasan/report.c pr_err("The buggy address belongs to the page:\n"); pr_err 421 mm/kasan/report.c pr_err("Memory state around the buggy address:\n"); pr_err 441 mm/kasan/report.c pr_err("%*c\n", pr_err 465 mm/kasan/report.c pr_err("BUG: KASAN: double-free or invalid-free in %pS\n", (void *)ip); pr_err 467 mm/kasan/report.c pr_err("\n"); pr_err 469 mm/kasan/report.c pr_err("\n"); pr_err 503 mm/kasan/report.c pr_err("\n"); pr_err 507 mm/kasan/report.c pr_err("\n"); pr_err 81 mm/kasan/tags_report.c pr_err("Pointer tag: [%02x], memory tag: [%02x]\n", addr_tag, *shadow); pr_err 2180 mm/khugepaged.c pr_err("khugepaged: kthread_run(khugepaged) failed\n"); pr_err 3196 mm/ksm.c pr_err("ksm: creating kthread failed\n"); pr_err 3204 mm/ksm.c pr_err("ksm: register sysfs failed\n"); pr_err 465 mm/memblock.c pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n", pr_err 215 mm/memory-failure.c pr_err("Memory failure: %#lx: Sending SIGBUS to %s:%d due to hardware memory corruption\n", pr_err 321 mm/memory-failure.c pr_err("Memory failure: Out of memory while machine check handling\n"); pr_err 374 mm/memory-failure.c pr_err("Memory failure: %#lx: forcibly killing %s:%d because of failure to unmap corrupted page\n", pr_err 387 mm/memory-failure.c pr_err("Memory failure: %#lx: Cannot send advisory machine check signal to %s:%d\n", pr_err 641 mm/memory-failure.c pr_err("Memory failure: %#lx: Unknown page state\n", pfn); pr_err 893 mm/memory-failure.c pr_err("Memory failure: %#lx: recovery action for %s: %s\n", pr_err 909 mm/memory-failure.c pr_err("Memory failure: %#lx: %s still referenced by %d users\n", pr_err 942 mm/memory-failure.c pr_err("Memory failure: %#lx: non anonymous thp\n", pr_err 993 mm/memory-failure.c pr_err("Memory failure: %#lx: can't handle KSM pages.\n", pfn); pr_err 998 mm/memory-failure.c pr_err("Memory failure: %#lx: keeping poisoned page in swap cache\n", pr_err 1035 mm/memory-failure.c pr_err("Memory failure: %#lx: failed to unmap page (mapcount=%d)\n", pr_err 1092 mm/memory-failure.c pr_err("Memory failure: %#lx: already hardware poisoned\n", pr_err 1122 mm/memory-failure.c pr_err("Memory failure: %#lx: just unpoisoned\n", pfn); pr_err 1268 mm/memory-failure.c pr_err("Memory failure: %#lx: memory outside kernel control\n", pr_err 1276 mm/memory-failure.c pr_err("Memory failure: %#lx: already hardware poisoned\n", pr_err 1310 mm/memory-failure.c pr_err("Memory failure: %#lx: non anonymous thp\n", pr_err 1313 mm/memory-failure.c pr_err("Memory failure: %#lx: thp split failed\n", pr_err 1371 mm/memory-failure.c pr_err("Memory failure: %#lx: just unpoisoned\n", pfn); pr_err 1471 mm/memory-failure.c pr_err("Memory failure: buffer overflow when queuing memory failure at %#lx\n", pr_err 981 mm/memory_hotplug.c pr_err("Cannot online node %d due to NULL pgdat\n", nid); pr_err 1013 mm/memory_hotplug.c pr_err("Block size [%#lx] unaligned hotplug range: start %#llx, size %#llx", pr_err 2757 mm/mempolicy.c pr_err("%s: interleaving failed\n", __func__); pr_err 33 mm/mempool.c pr_err("BUG: mempool element poison mismatch\n"); pr_err 34 mm/mempool.c pr_err("Mempool %p size %zu\n", pool, size); pr_err 35 mm/mempool.c pr_err(" nr=%d @ %p: %s0x", nr, element, start > 0 ? "... " : ""); pr_err 3763 mm/mmap.c pr_err("Failed registering memory add/remove notifier for admin reserve\n"); pr_err 1089 mm/nommu.c pr_err("Allocation of length %lu from process %d (%s) failed\n", pr_err 887 mm/oom_kill.c pr_err("%s: Killed process %d (%s) total-vm:%lukB, anon-rss:%lukB, file-rss:%lukB, shmem-rss:%lukB, UID:%u pgtables:%lukB oom_score_adj:%hd\n", pr_err 577 mm/page_alloc.c pr_err("page 0x%lx outside node %d zone %s [ 0x%lx - 0x%lx ]\n", pr_err 729 mm/page_alloc.c pr_err("Bad debug_guardpage_minorder value\n"); pr_err 243 mm/page_ext.c pr_err("page ext allocation failure\n"); pr_err 233 mm/page_idle.c pr_err("page_idle: register sysfs failed\n"); pr_err 235 mm/page_io.c pr_err("swapon: swapfile has holes\n"); pr_err 87 mm/page_poison.c pr_err("pagealloc: single bit error\n"); pr_err 89 mm/page_poison.c pr_err("pagealloc: memory corruption\n"); pr_err 23 mm/rodata_test.c pr_err("test 1 fails (start data)\n"); pr_err 30 mm/rodata_test.c pr_err("test data was not read only\n"); pr_err 36 mm/rodata_test.c pr_err("test data was changed\n"); pr_err 44 mm/rodata_test.c pr_err("start of .rodata is not page size aligned\n"); pr_err 48 mm/rodata_test.c pr_err("end of .rodata is not page size aligned\n"); pr_err 3908 mm/shmem.c pr_err("Could not register tmpfs\n"); pr_err 3915 mm/shmem.c pr_err("Could not kern_mount tmpfs\n"); pr_err 441 mm/slab.c pr_err("slab error in %s(): cache `%s': %s\n", pr_err 1455 mm/slab.c pr_err("%03x: ", offset); pr_err 1468 mm/slab.c pr_err("Single bit error detected. Probably bad RAM.\n"); pr_err 1470 mm/slab.c pr_err("Run memtest86+ or a similar memory test tool.\n"); pr_err 1472 mm/slab.c pr_err("Run a memory test tool.\n"); pr_err 1487 mm/slab.c pr_err("Redzone: 0x%llx/0x%llx\n", pr_err 1493 mm/slab.c pr_err("Last user: (%pSR)\n", *dbg_userword(cachep, objp)); pr_err 1526 mm/slab.c pr_err("Slab corruption (%s): %s start=%px, len=%d\n", pr_err 1555 mm/slab.c pr_err("Prev obj: start=%px, len=%d\n", realobj, size); pr_err 1561 mm/slab.c pr_err("Next obj: start=%px, len=%d\n", realobj, size); pr_err 2538 mm/slab.c pr_err("slab: double free detected in cache '%s', objp %px\n", pr_err 2685 mm/slab.c pr_err("kfree_debugcheck: out of range ptr %lxh\n", pr_err 2709 mm/slab.c pr_err("%px: redzone 1:0x%llx, redzone 2:0x%llx\n", pr_err 3015 mm/slab.c pr_err("%px: redzone 1:0x%llx, redzone 2:0x%llx\n", pr_err 3028 mm/slab.c pr_err("0x%px: not aligned to ARCH_SLAB_MINALIGN=%d\n", pr_err 3934 mm/slab.c pr_err("enable_cpucache failed for %s, error %d\n", pr_err 90 mm/slab_common.c pr_err("kmem_cache_create(%s) integrity check failed\n", name); pr_err 963 mm/slab_common.c pr_err("kmem_cache_destroy %s: Slab cache still has objects\n", pr_err 588 mm/slub.c pr_err("INFO: %s in %pS age=%lu cpu=%u pid=%d\n", pr_err 595 mm/slub.c pr_err("\t%pS\n", (void *)t->addrs[i]); pr_err 614 mm/slub.c pr_err("INFO: Slab 0x%p objects=%u used=%u fp=0x%p flags=0x%04lx\n", pr_err 627 mm/slub.c pr_err("=============================================================================\n"); pr_err 628 mm/slub.c pr_err("BUG %s (%s): %pV\n", s->name, print_tainted(), &vaf); pr_err 629 mm/slub.c pr_err("-----------------------------------------------------------------------------\n\n"); pr_err 643 mm/slub.c pr_err("FIX %s: %pV\n", s->name, &vaf); pr_err 656 mm/slub.c pr_err("INFO: Object 0x%p @offset=%tu fp=0x%p\n\n", pr_err 751 mm/slub.c pr_err("INFO: 0x%p-0x%p. First byte 0x%x instead of 0x%x\n", pr_err 1156 mm/slub.c pr_err("SLUB <none>: no slab for object 0x%p.\n", pr_err 1274 mm/slub.c pr_err("slub_debug option '%c' unknown. skipped\n", pr_err 1520 mm/slub.c pr_err("SLUB: Unable to initialize free list for %s\n", pr_err 3396 mm/slub.c pr_err("SLUB: Unable to allocate memory from node %d\n", node); pr_err 3397 mm/slub.c pr_err("SLUB: Allocating a useless per node structure in order to be able to continue\n"); pr_err 3706 mm/slub.c pr_err("INFO: Object 0x%p @offset=%tu\n", p, p - addr); pr_err 4454 mm/slub.c pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n", pr_err 4465 mm/slub.c pr_err("SLUB: %s %ld slabs counted but counter=%ld\n", pr_err 4723 mm/slub.c pr_err("SLUB resiliency testing\n"); pr_err 4724 mm/slub.c pr_err("-----------------------\n"); pr_err 4725 mm/slub.c pr_err("A. Corruption after allocation\n"); pr_err 4729 mm/slub.c pr_err("\n1. kmalloc-16: Clobber Redzone/next pointer 0x12->0x%p\n\n", pr_err 4737 mm/slub.c pr_err("\n2. kmalloc-32: Clobber next pointer/next slab 0x34 -> -0x%p\n", pr_err 4739 mm/slub.c pr_err("If allocated object is overwritten then not detectable\n\n"); pr_err 4745 mm/slub.c pr_err("\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n", pr_err 4747 mm/slub.c pr_err("If allocated object is overwritten then not detectable\n\n"); pr_err 4750 mm/slub.c pr_err("\nB. Corruption after free\n"); pr_err 4754 mm/slub.c pr_err("1. kmalloc-128: Clobber first word 0x78->0x%p\n\n", p); pr_err 4760 mm/slub.c pr_err("\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p); pr_err 4766 mm/slub.c pr_err("\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p); pr_err 5882 mm/slub.c pr_err("Cannot register slab subsystem.\n"); pr_err 5891 mm/slub.c pr_err("SLUB: Unable to add boot slab %s to sysfs\n", pr_err 5901 mm/slub.c pr_err("SLUB: Unable to add boot slab alias %s to sysfs\n", pr_err 538 mm/sparse.c pr_err("%s: node[%d] usemap allocation failed", __func__, nid); pr_err 551 mm/sparse.c pr_err("%s: node[%d] memory map backing failed. Some memory will not be available.", pr_err 828 mm/swap_state.c pr_err("failed to create swap kobject\n"); pr_err 833 mm/swap_state.c pr_err("failed to register swap group\n"); pr_err 1122 mm/swapfile.c pr_err("swap_info_get: %s%08lx\n", Bad_offset, entry.val); pr_err 1125 mm/swapfile.c pr_err("swap_info_get: %s%08lx\n", Unused_file, entry.val); pr_err 1128 mm/swapfile.c pr_err("swap_info_get: %s%08lx\n", Bad_file, entry.val); pr_err 1145 mm/swapfile.c pr_err("swap_info_get: %s%08lx\n", Unused_offset, entry.val); pr_err 1269 mm/swapfile.c pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val); pr_err 2937 mm/swapfile.c pr_err("Unable to find swap-space signature\n"); pr_err 3270 mm/swapfile.c pr_err("swapon: discard_swap(%p): %d\n", pr_err 506 mm/vmscan.c pr_err("shrink_slab: %pS negative objects to delete nr=%ld\n", pr_err 4094 mm/vmscan.c pr_err("Failed to start kswapd on node %d\n", nid); pr_err 1976 mm/vmstat.c pr_err("vmstat: failed to register 'dead' hotplug state\n"); pr_err 1982 mm/vmstat.c pr_err("vmstat: failed to register 'online' hotplug state\n"); pr_err 901 mm/z3fold.c pr_err("No free chunks in unbuddied\n"); pr_err 1038 mm/z3fold.c pr_err("%s: unknown bud %d\n", __func__, bud); pr_err 1288 mm/z3fold.c pr_err("unknown buddy id %d\n", buddy); pr_err 171 mm/zpool.c pr_err("no driver for type %s\n", type); pr_err 177 mm/zpool.c pr_err("couldn't create zpool - out of memory\n"); pr_err 188 mm/zpool.c pr_err("couldn't create %s pool\n", type); pr_err 408 mm/zswap.c pr_err("could not alloc crypto comp %s : %ld\n", pr_err 531 mm/zswap.c pr_err("%s zpool not available\n", type); pr_err 539 mm/zswap.c pr_err("percpu alloc failed\n"); pr_err 573 mm/zswap.c pr_err("compressor %s not available, using default %s\n", pr_err 580 mm/zswap.c pr_err("default compressor %s not available\n", pr_err 588 mm/zswap.c pr_err("zpool %s not available, using default %s\n", pr_err 595 mm/zswap.c pr_err("default zpool %s not available\n", pr_err 674 mm/zswap.c pr_err("can't set param, initialization failed\n"); pr_err 690 mm/zswap.c pr_err("zpool %s not available\n", s); pr_err 696 mm/zswap.c pr_err("compressor %s not available\n", s); pr_err 777 mm/zswap.c pr_err("can't enable, initialization failed\n"); pr_err 781 mm/zswap.c pr_err("can't enable, no pool configured\n"); pr_err 1226 mm/zswap.c pr_err("alloc failed, zswap disabled for swap type %d\n", type); pr_err 1306 mm/zswap.c pr_err("entry cache creation failed\n"); pr_err 1313 mm/zswap.c pr_err("dstmem alloc failed\n"); pr_err 1331 mm/zswap.c pr_err("pool creation failed\n"); pr_err 127 net/8021q/vlanproc.c pr_err("can't create entry in proc filesystem!\n"); pr_err 1599 net/9p/client.c pr_err("bogus RREAD count (%d > %d)\n", count, rsize); pr_err 1671 net/9p/client.c pr_err("bogus RWRITE count (%d > %d)\n", count, rsize); pr_err 2115 net/9p/client.c pr_err("bogus RREADDIR count (%d > %d)\n", count, rsize); pr_err 225 net/9p/error.c pr_err("%s: server reported unknown error %s\n", pr_err 834 net/9p/trans_fd.c pr_err("%s (%d): failed to map fd\n", pr_err 968 net/9p/trans_fd.c pr_err("%s (%d): problem creating socket\n", pr_err 976 net/9p/trans_fd.c pr_err("%s (%d): problem binding to privport\n", pr_err 987 net/9p/trans_fd.c pr_err("%s (%d): problem connecting socket to %s\n", pr_err 1009 net/9p/trans_fd.c pr_err("%s (%d): address too long: %s\n", pr_err 1019 net/9p/trans_fd.c pr_err("%s (%d): problem creating socket\n", pr_err 1027 net/9p/trans_fd.c pr_err("%s (%d): problem connecting socket: %s: %d\n", pr_err 1047 net/9p/trans_fd.c pr_err("Insufficient options for proto=fd\n"); pr_err 319 net/9p/trans_rdma.c pr_err("Duplicate reply for request %d", tag); pr_err 660 net/9p/trans_rdma.c pr_err("%s (%d): problem binding to privport: %d\n", pr_err 567 net/9p/trans_virtio.c pr_err("Failed to allocate virtio 9P channel\n"); pr_err 675 net/9p/trans_virtio.c pr_err("no channels available for device %s\n", devname); pr_err 554 net/atm/br2684.c pr_err("tried to attach to non-existent device\n"); pr_err 696 net/atm/br2684.c pr_err("register_netdev failed\n"); pr_err 92 net/atm/clip.c pr_err("!clip_vcc->entry (clip_vcc %p)\n", clip_vcc); pr_err 112 net/atm/clip.c pr_err("neigh_update failed with %d\n", error); pr_err 115 net/atm/clip.c pr_err("ATMARP: failed (entry %p, vcc 0x%p)\n", entry, clip_vcc); pr_err 343 net/atm/clip.c pr_err("skb_dst(skb) == NULL\n"); pr_err 355 net/atm/clip.c pr_err("NO NEIGHBOUR !\n"); pr_err 459 net/atm/clip.c pr_err("hiding hidden ATMARP entry\n"); pr_err 885 net/atm/clip.c pr_err("Unable to initialize /proc/net/atm/arp\n"); pr_err 859 net/atm/common.c pr_err("atmpvc_init() failed with %d\n", error); pr_err 864 net/atm/common.c pr_err("atmsvc_init() failed with %d\n", error); pr_err 869 net/atm/common.c pr_err("atm_proc_init() failed with %d\n", error); pr_err 874 net/atm/common.c pr_err("atm_sysfs_init() failed with %d\n", error); pr_err 1043 net/atm/lec.c pr_err("Unable to initialize /proc/net/atm/lec\n"); pr_err 295 net/atm/mpoa_proc.c pr_err("Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME); pr_err 86 net/atm/resources.c pr_err("no space for dev %s\n", type); pr_err 116 net/atm/resources.c pr_err("atm_proc_dev_register failed for dev %s\n", type); pr_err 121 net/atm/resources.c pr_err("atm_register_sysfs failed for dev %s\n", type); pr_err 205 net/atm/signaling.c pr_err("closing with requests pending\n"); pr_err 147 net/batman-adv/bat_algo.c pr_err("Routing algorithm '%s' is not supported\n", algo_name); pr_err 403 net/batman-adv/bat_iv_ogm.c pr_err("Error - can't forward packet: incoming iface not specified\n"); pr_err 172 net/batman-adv/hard-interface.c pr_err("Cannot find parent device\n"); pr_err 740 net/batman-adv/hard-interface.c pr_err("Can't create batman mesh interface %s: already exists as regular interface\n", pr_err 84 net/batman-adv/icmp_socket.c pr_err("Error - can't add another packet client: maximum number of clients reached\n"); pr_err 140 net/batman-adv/log.h pr_err("%s: " fmt, _netdev->name, ## arg); \ pr_err 1068 net/batman-adv/soft-interface.c pr_err("Unable to register the batman interface '%s': %i\n", pr_err 1040 net/batman-adv/sysfs.c pr_err("Failed to store new mesh_iface state %s for %s: %d\n", pr_err 1061 net/batman-adv/sysfs.c pr_err("Invalid parameter for 'mesh_iface' setting received: interface name too long '%s'\n", pr_err 913 net/batman-adv/tp_meter.c pr_err("batadv: cannot create tp meter kthread\n"); pr_err 96 net/bluetooth/ecdh_helper.c pr_err("alg: ecdh: compute shared secret failed. err %d\n", pr_err 180 net/bluetooth/lib.c pr_err("%pV", &vaf); pr_err 56 net/bpfilter/bpfilter_kern.c pr_err("write fail %zd\n", n); pr_err 65 net/bpfilter/bpfilter_kern.c pr_err("read fail %zd\n", n); pr_err 319 net/bridge/br.c pr_err("bridge: can't register sap for STP\n"); pr_err 1840 net/bridge/netfilter/ebtables.c pr_err("wrong size: *len %d, entries_size %u, replsz %d\n", pr_err 323 net/caif/cfcnfg.c pr_err("adap_layer is zero\n"); pr_err 327 net/caif/cfcnfg.c pr_err("adap_layer->receive is NULL\n"); pr_err 331 net/caif/cfcnfg.c pr_err("adap_layer->ctrlcmd == NULL\n"); pr_err 338 net/caif/cfcnfg.c pr_err("Specified PHY type does not exist!\n"); pr_err 401 net/caif/cfcnfg.c pr_err("ERROR: Link Layer Device disappeared while connecting\n"); pr_err 435 net/caif/cfcnfg.c pr_err("Protocol error. Link setup response - unknown channel type\n"); pr_err 220 net/caif/cfctrl.c pr_err("Duplicate connect request for same client\n"); pr_err 297 net/caif/cfctrl.c pr_err("Could not remove request (%d)", count); pr_err 499 net/caif/cfctrl.c pr_err("Invalid O/E bit or parse error " pr_err 523 net/caif/cfctrl.c pr_err("Frame Error Indication received\n"); pr_err 542 net/caif/cfctrl.c pr_err("Unrecognized Control Frame\n"); pr_err 50 net/caif/cfdgml.c pr_err("Packet is erroneous!\n"); pr_err 57 net/caif/cfdgml.c pr_err("Packet is erroneous!\n"); pr_err 100 net/caif/cffrml.c pr_err("Framing length error (%d)\n", len); pr_err 123 net/caif/cffrml.c pr_err("Packet is erroneous!\n"); pr_err 129 net/caif/cffrml.c pr_err("Layr up is missing!\n"); pr_err 156 net/caif/cffrml.c pr_err("Packet is erroneous!\n"); pr_err 181 net/caif/cfmuxl.c pr_err("erroneous Caif Packet\n"); pr_err 117 net/caif/cfsrvl.c pr_err("Packet is erroneous!\n"); pr_err 138 net/caif/cfsrvl.c pr_err("Packet is erroneous!\n"); pr_err 49 net/caif/cfutill.c pr_err("Packet is erroneous!\n"); pr_err 66 net/caif/cfutill.c pr_err("REMOTE SHUTDOWN REQUEST RECEIVED\n"); pr_err 49 net/caif/cfveil.c pr_err("Packet is erroneous!\n"); pr_err 87 net/caif/cfveil.c pr_err("Packet is erroneous!\n"); pr_err 40 net/caif/cfvidl.c pr_err("Packet is erroneous!\n"); pr_err 725 net/can/af_can.c pr_err("can: protocol number %d out of range\n", proto); pr_err 736 net/can/af_can.c pr_err("can: protocol %d already registered\n", proto); pr_err 392 net/can/j1939/main.c pr_err("can: registration of j1939 protocol failed\n"); pr_err 888 net/can/raw.c pr_err("can: registration of raw protocol failed\n"); pr_err 164 net/ceph/auth.c pr_err("error %d building auth method %s request\n", ret, pr_err 234 net/ceph/auth.c pr_err("error %d on auth protocol %d init\n", pr_err 247 net/ceph/auth.c pr_err("auth method '%s' error %d\n", ac->ops->name, ret); pr_err 255 net/ceph/auth.c pr_err("failed to decode auth msg\n"); pr_err 87 net/ceph/auth_x.c pr_err("%s bad magic\n", __func__); pr_err 401 net/ceph/auth_x.c pr_err("failed to encrypt authorizer: %d", ret); pr_err 696 net/ceph/auth_x.c pr_err("bad size %d for ceph_x_authorize_challenge\n", ret); pr_err 716 net/ceph/auth_x.c pr_err("failed to decrypt authorize challenge: %d", ret); pr_err 722 net/ceph/auth_x.c pr_err("failed to encrypt authorizer w/ challenge: %d", ret); pr_err 741 net/ceph/auth_x.c pr_err("bad size %d for ceph_x_authorize_reply\n", ret); pr_err 944 net/ceph/auth_x.c pr_err("no secret set (for auth_x protocol)\n"); pr_err 950 net/ceph/auth_x.c pr_err("cannot clone key: %d\n", ret); pr_err 109 net/ceph/ceph_common.c pr_err("bad fsid, had %pU got %pU", pr_err 411 net/ceph/ceph_common.c pr_err("bad option at '%s'\n", c); pr_err 419 net/ceph/ceph_common.c pr_err("bad option arg (not int) at '%s'\n", c); pr_err 489 net/ceph/ceph_common.c pr_err("osdkeepalive out of range\n"); pr_err 499 net/ceph/ceph_common.c pr_err("osd_idle_ttl out of range\n"); pr_err 508 net/ceph/ceph_common.c pr_err("mount_timeout out of range\n"); pr_err 517 net/ceph/ceph_common.c pr_err("osd_request_timeout out of range\n"); pr_err 253 net/ceph/crypto.c pr_err("%s %scrypt failed: %d\n", __func__, pr_err 270 net/ceph/crypto.c pr_err("%s got bad padding %d on in_len %d\n", pr_err 281 net/ceph/messenger.c pr_err("msgr_init failed to create workqueue\n"); pr_err 487 net/ceph/messenger.c pr_err("connect %s error %d\n", pr_err 499 net/ceph/messenger.c pr_err("kernel_setsockopt(TCP_NODELAY) failed: %d", pr_err 1767 net/ceph/messenger.c pr_err("authorizer reply too big: %d > %zu\n", size, pr_err 1794 net/ceph/messenger.c pr_err("connect to %s got bad banner\n", pr_err 2007 net/ceph/messenger.c pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c); pr_err 2097 net/ceph/messenger.c pr_err("%s%lld %s feature set mismatch," pr_err 2107 net/ceph/messenger.c pr_err("%s%lld %s protocol version mismatch," pr_err 2142 net/ceph/messenger.c pr_err("%s%lld %s connection reset\n", pr_err 2198 net/ceph/messenger.c pr_err("%s%lld %s protocol feature mismatch," pr_err 2388 net/ceph/messenger.c pr_err("read_partial_message bad hdr crc %u != expected %u\n", pr_err 2415 net/ceph/messenger.c pr_err("read_partial_message bad seq %lld expected %lld\n", pr_err 2495 net/ceph/messenger.c pr_err("read_partial_message %p front crc %u != exp. %u\n", pr_err 2500 net/ceph/messenger.c pr_err("read_partial_message %p middle crc %u != exp %u\n", pr_err 2507 net/ceph/messenger.c pr_err("read_partial_message %p data crc %u != exp. %u\n", m, pr_err 2514 net/ceph/messenger.c pr_err("read_partial_message %p signature check failed\n", m); pr_err 2804 net/ceph/messenger.c pr_err("try_read bad con->in_tag = %d\n", (int)con->in_tag); pr_err 3375 net/ceph/messenger.c pr_err("msg_new can't create type %d front %d\n", type, pr_err 337 net/ceph/mon_client.c pr_err("got corrupt subscribe-ack msg\n"); pr_err 481 net/ceph/mon_client.c pr_err("problem decoding monmap, %d\n", pr_err 693 net/ceph/mon_client.c pr_err("corrupt statfs reply, tid %llu\n", tid); pr_err 775 net/ceph/mon_client.c pr_err("corrupt mon_get_version reply, tid %llu\n", tid); pr_err 895 net/ceph/mon_client.c pr_err("corrupt mon_command ack, tid %llu\n", tid); pr_err 1274 net/ceph/mon_client.c pr_err("received unknown message type %d %s\n", type, pr_err 1041 net/ceph/osd_client.c pr_err("unsupported osd opcode %s\n", pr_err 1740 net/ceph/osd_client.c pr_err("got struct_v %d < 4 of hobject_t\n", struct_v); pr_err 2917 net/ceph/osd_client.c pr_err("failed to allocate error-lwork\n"); pr_err 3623 net/ceph/osd_client.c pr_err("failed to decode MOSDOpReply for tid %llu: %d\n", pr_err 3664 net/ceph/osd_client.c pr_err("num_ops %d != %d for tid %llu\n", m.num_ops, pr_err 3676 net/ceph/osd_client.c pr_err("sum of lens %u != %u for tid %llu\n", data_len, pr_err 4060 net/ceph/osd_client.c pr_err("osdc handle_map corrupt msg\n"); pr_err 4229 net/ceph/osd_client.c pr_err("%s failed to allocate spg\n", __func__); pr_err 4238 net/ceph/osd_client.c pr_err("%s failed to allocate backoff\n", __func__); pr_err 4257 net/ceph/osd_client.c pr_err("%s failed to allocate msg\n", __func__); pr_err 4287 net/ceph/osd_client.c pr_err("%s osd%d spgid %llu.%xs%d id %llu backoff dne\n", pr_err 4295 net/ceph/osd_client.c pr_err("%s osd%d spgid %llu.%xs%d id %llu bad range?\n", pr_err 4350 net/ceph/osd_client.c pr_err("failed to decode MOSDBackoff: %d\n", ret); pr_err 4363 net/ceph/osd_client.c pr_err("%s osd%d unknown op %d\n", __func__, osd->o_osd, m.op); pr_err 4451 net/ceph/osd_client.c pr_err("failed to allocate notify-lwork\n"); pr_err 4470 net/ceph/osd_client.c pr_err("osdc handle_watch_notify corrupt msg\n"); pr_err 5429 net/ceph/osd_client.c pr_err("received unknown message type %d %s\n", type, pr_err 368 net/ceph/osdmap.c pr_err("crush_decode magic %x != current %x\n", pr_err 1603 net/ceph/osdmap.c pr_err("corrupt full osdmap (%d) epoch %d off %d (%p of %p-%p)\n", pr_err 1896 net/ceph/osdmap.c pr_err("corrupt inc osdmap (%d) epoch %d off %d (%p of %p-%p)\n", pr_err 2352 net/ceph/osdmap.c pr_err("no crush rule: pool %lld ruleset %d type %d size %d\n", pr_err 2367 net/ceph/osdmap.c pr_err("error %d from crush rule %d: pool %lld ruleset %d type %d size %d\n", pr_err 1176 net/core/dev.c pr_err("%s: name change rollback failed: %d\n", pr_err 3044 net/core/dev.c pr_err("%s: hw csum failure\n", dev ? dev->name : "<unknown>"); pr_err 7189 net/core/dev.c pr_err("Adjacency does not exist for device %s from %s\n", pr_err 9326 net/core/dev.c pr_err("network todo '%s' but state %d\n", pr_err 9480 net/core/dev.c pr_err("alloc_netdev: Unable to allocate device with zero queues\n"); pr_err 9485 net/core/dev.c pr_err("alloc_netdev: Unable to allocate device with zero RX queues\n"); pr_err 1640 net/core/drop_monitor.c pr_err("Unable to store program counters on this arch, Drop monitor failed\n"); pr_err 1646 net/core/drop_monitor.c pr_err("Could not create drop monitor netlink family\n"); pr_err 68 net/core/netpoll.c pr_err("%s: " fmt, np->name, ##__VA_ARGS__) pr_err 1792 net/core/pktgen.c pr_err("ERROR: No thread\n"); pr_err 1901 net/core/pktgen.c pr_err("%s: timed out after waiting %d msec for device %s to be removed\n", pr_err 1932 net/core/pktgen.c pr_err("can't move proc entry for '%s'\n", pr_err 2002 net/core/pktgen.c pr_err("no such netdevice: \"%s\"\n", ifname); pr_err 2007 net/core/pktgen.c pr_err("not an ethernet device: \"%s\"\n", ifname); pr_err 2010 net/core/pktgen.c pr_err("device is down: \"%s\"\n", ifname); pr_err 2029 net/core/pktgen.c pr_err("ERROR: pkt_dev->odev == NULL in setup_inject\n"); pr_err 2102 net/core/pktgen.c pr_err("ERROR: IPv6 link address not available\n"); pr_err 2566 net/core/pktgen.c pr_err("Error expanding ipsec packet %d\n", pr_err 2576 net/core/pktgen.c pr_err("Error creating ipsec packet %d\n", ret); pr_err 3329 net/core/pktgen.c pr_err("ERROR: couldn't allocate skb in fill_packet\n"); pr_err 3574 net/core/pktgen.c pr_err("ERROR: already assigned to a thread\n"); pr_err 3600 net/core/pktgen.c pr_err("ERROR: interface already used\n"); pr_err 3644 net/core/pktgen.c pr_err("cannot create %s/%s procfs entry\n", pr_err 3686 net/core/pktgen.c pr_err("ERROR: out of memory, can't create new thread\n"); pr_err 3703 net/core/pktgen.c pr_err("kernel_thread() failed for cpu %d\n", t->cpu); pr_err 3714 net/core/pktgen.c pr_err("cannot create %s/%s procfs entry\n", pr_err 3799 net/core/pktgen.c pr_err("cannot create %s procfs entry\n", PGCTRL); pr_err 3814 net/core/pktgen.c pr_err("Initialization failed for all threads\n"); pr_err 276 net/core/rtnetlink.c pr_err("Unable to register rtnetlink message handler, " pr_err 5785 net/core/skbuff.c pr_err("Not enough bytes to eat. Want %d\n", eat); pr_err 3310 net/core/sock.c pr_err("PROTO_INUSE_NR exhausted\n"); pr_err 395 net/core/utils.c pr_err("unexpected address family %d\n", af); pr_err 165 net/dccp/timer.c pr_err("dccp should not use a keepalive timer !\n"); pr_err 532 net/dsa/dsa2.c pr_err("DSA: tree %d already setup! Disjoint trees?\n", pr_err 63 net/dsa/port.c pr_err("DSA: failed to set STP state %u (%d)\n", state, err); pr_err 166 net/dsa/port.c pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n"); pr_err 632 net/dsa/port.c pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl)); pr_err 638 net/dsa/port.c pr_err("could not attach to PHY: %d\n", err); pr_err 1749 net/dsa/slave.c pr_err("DSA: failed to unregister switchdev blocking notifier (%d)\n", err); pr_err 1753 net/dsa/slave.c pr_err("DSA: failed to unregister switchdev notifier (%d)\n", err); pr_err 1757 net/dsa/slave.c pr_err("DSA: failed to unregister slave notifier (%d)\n", err); pr_err 101 net/hsr/hsr_debugfs.c pr_err("Cannot create hsr debugfs directory\n"); pr_err 111 net/hsr/hsr_debugfs.c pr_err("Cannot create hsr node_table file\n"); pr_err 138 net/hsr/hsr_debugfs.c pr_err("Cannot create hsr debugfs root directory\n"); pr_err 144 net/ipv4/af_inet.c pr_err("Attempt to release TCP socket in state %d %p\n", pr_err 149 net/ipv4/af_inet.c pr_err("Attempt to release alive inet socket %p\n", sk); pr_err 1163 net/ipv4/af_inet.c pr_err("Attempt to override permanent protocol %d\n", protocol); pr_err 1167 net/ipv4/af_inet.c pr_err("Ignoring attempt to register invalid socket type %d\n", pr_err 1176 net/ipv4/af_inet.c pr_err("Attempt to unregister permanent protocol %d\n", pr_err 246 net/ipv4/devinet.c pr_err("Freeing alive in_device %p\n", idev); pr_err 1212 net/ipv4/fou.c pr_err("can't add fou ops\n"); pr_err 1218 net/ipv4/fou.c pr_err("can't add gue ops\n"); pr_err 206 net/ipv4/gre_demux.c pr_err("can't add protocol\n"); pr_err 3019 net/ipv4/igmp.c pr_err("Failed to initialize the IGMP autojoin socket (err %d)\n", pr_err 701 net/ipv4/ip_vti.c pr_err("vti init: failed to register %s\n", msg); pr_err 226 net/ipv4/ipconfig.c pr_err("IP-Config: Failed to open %s\n", dev->name); pr_err 244 net/ipv4/ipconfig.c pr_err("IP-Config: Failed to open %s\n", pr_err 299 net/ipv4/ipconfig.c pr_err("IP-Config: Device `%s' not found\n", pr_err 302 net/ipv4/ipconfig.c pr_err("IP-Config: No network devices available\n"); pr_err 353 net/ipv4/ipconfig.c pr_err("IP-Config: Unable to set interface address (%d)\n", pr_err 359 net/ipv4/ipconfig.c pr_err("IP-Config: Unable to set interface netmask (%d)\n", pr_err 365 net/ipv4/ipconfig.c pr_err("IP-Config: Unable to set interface broadcast address (%d)\n", pr_err 376 net/ipv4/ipconfig.c pr_err("IP-Config: Unable to set interface mtu to %d (%d)\n", pr_err 393 net/ipv4/ipconfig.c pr_err("IP-Config: Gateway not on directly connected network\n"); pr_err 401 net/ipv4/ipconfig.c pr_err("IP-Config: Cannot add default route (%d)\n", pr_err 437 net/ipv4/ipconfig.c pr_err("IP-Config: Unable to guess netmask for address %pI4\n", pr_err 1173 net/ipv4/ipconfig.c pr_err("IP-Config: Incomplete network configuration information\n"); pr_err 1179 net/ipv4/ipconfig.c pr_err("DHCP/BOOTP: No suitable device found\n"); pr_err 1183 net/ipv4/ipconfig.c pr_err("RARP: No suitable device found\n"); pr_err 1512 net/ipv4/ipconfig.c pr_err("IP-Config: Retrying forever (NFS root)...\n"); pr_err 1518 net/ipv4/ipconfig.c pr_err("IP-Config: Reopening network devices...\n"); pr_err 1523 net/ipv4/ipconfig.c pr_err("IP-Config: Auto-configuration of network failed\n"); pr_err 1527 net/ipv4/ipconfig.c pr_err("IP-Config: Incomplete network configuration information\n"); pr_err 1260 net/ipv4/ipmr.c pr_err("ipmr: rhtable insert error %d\n", ret); pr_err 3146 net/ipv4/ipmr.c pr_err("%s: can't add PIM protocol\n", __func__); pr_err 466 net/ipv4/netfilter/ipt_CLUSTERIP.c pr_err("cannot use CLUSTERIP target from nftables compat\n"); pr_err 834 net/ipv4/netfilter/ipt_CLUSTERIP.c pr_err("Unable to proc dir entry\n"); pr_err 134 net/ipv4/netfilter/nf_log_arp.c pr_err("failed to register logger\n"); pr_err 370 net/ipv4/netfilter/nf_log_ipv4.c pr_err("failed to register logger\n"); pr_err 35 net/ipv4/protocol.c pr_err("Protocol %u is not namespace aware, cannot register.\n", pr_err 3498 net/ipv4/route.c pr_err("Unable to create route proc files\n"); pr_err 77 net/ipv4/tcp_cong.c pr_err("%s does not implement required ops\n", ca->name); pr_err 4194 net/ipv4/tcp_input.c pr_err("%s: Impossible, sk->sk_state=%d\n", pr_err 3229 net/ipv4/tcp_output.c pr_err("%s: wrong queue state\n", __func__); pr_err 666 net/ipv4/tcp_timer.c pr_err("Hmm... keepalive on a LISTEN ???\n"); pr_err 237 net/ipv4/tunnel4.c pr_err("%s: can't add protocol\n", __func__); pr_err 245 net/ipv4/tunnel4.c pr_err("tunnelmpls4 close: can't remove protocol\n"); pr_err 249 net/ipv4/tunnel4.c pr_err("tunnel64 close: can't remove protocol\n"); pr_err 252 net/ipv4/tunnel4.c pr_err("tunnel4 close: can't remove protocol\n"); pr_err 121 net/ipv4/udplite.c pr_err("%s: Cannot register /proc!\n", __func__); pr_err 249 net/ipv4/xfrm4_protocol.c pr_err("%s: can't add protocol\n", __func__); pr_err 284 net/ipv4/xfrm4_protocol.c pr_err("%s: can't remove protocol\n", __func__); pr_err 713 net/ipv6/af_inet6.c pr_err("Attempt to override permanent protocol %d\n", protocol); pr_err 717 net/ipv6/af_inet6.c pr_err("Ignoring attempt to register invalid socket type %d\n", pr_err 727 net/ipv6/af_inet6.c pr_err("Attempt to unregister permanent protocol %d\n", pr_err 176 net/ipv6/fou6.c pr_err("can't add fou6 ops\n"); pr_err 182 net/ipv6/fou6.c pr_err("can't add gue6 ops\n"); pr_err 995 net/ipv6/icmp.c pr_err("Failed to initialize the ICMP6 control socket (err %d)\n", pr_err 1039 net/ipv6/icmp.c pr_err("Failed to register ICMP6 protocol\n"); pr_err 2295 net/ipv6/ip6_tunnel.c pr_err("%s: can't register ip4ip6\n", __func__); pr_err 2301 net/ipv6/ip6_tunnel.c pr_err("%s: can't register ip6ip6\n", __func__); pr_err 1249 net/ipv6/ip6_vti.c pr_err("vti6 init: failed to register %s\n", msg); pr_err 1368 net/ipv6/ip6mr.c pr_err("%s: can't add PIM protocol\n", __func__); pr_err 1455 net/ipv6/ip6mr.c pr_err("ip6mr: rhtable insert error %d\n", err); pr_err 2964 net/ipv6/mcast.c pr_err("Failed to initialize the IGMP6 control socket (err %d)\n", pr_err 2974 net/ipv6/mcast.c pr_err("Failed to initialize the IGMP6 autojoin socket (err %d)\n", pr_err 109 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c pr_err("nf_defrag_ipv6: can't initialize frag6.\n"); pr_err 114 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c pr_err("nf_defrag_ipv6: can't register pernet ops\n"); pr_err 402 net/ipv6/netfilter/nf_log_ipv6.c pr_err("failed to register logger\n"); pr_err 164 net/ipv6/tunnel6.c pr_err("%s: can't add protocol\n", __func__); pr_err 168 net/ipv6/tunnel6.c pr_err("%s: can't add protocol\n", __func__); pr_err 178 net/ipv6/tunnel6.c pr_err("%s: can't remove protocol\n", __func__); pr_err 180 net/ipv6/tunnel6.c pr_err("%s: can't remove protocol\n", __func__); pr_err 223 net/ipv6/xfrm6_protocol.c pr_err("%s: can't add protocol\n", __func__); pr_err 258 net/ipv6/xfrm6_protocol.c pr_err("%s: can't remove protocol\n", __func__); pr_err 414 net/iucv/af_iucv.c pr_err("Attempt to release alive iucv socket %p\n", sk); pr_err 1245 net/iucv/af_iucv.c pr_err( pr_err 103 net/key/af_key.c pr_err("Attempt to release alive pfkey socket: %p\n", sk); pr_err 1450 net/key/af_key.c pr_err("pfkey: Unknown policy event %d\n", event); pr_err 1469 net/key/af_key.c pr_err("pfkey: Unknown SA event %d\n", event); pr_err 3072 net/key/af_key.c pr_err("pfkey: Unknown SA event %d\n", c->event); pr_err 3096 net/key/af_key.c pr_err("pfkey: Unknown policy event %d\n", c->event); pr_err 1768 net/l2tp/l2tp_core.c pr_err("alloc_workqueue failed\n"); pr_err 115 net/mac80211/debug.h pr_err("%s: " fmt, \ pr_err 818 net/mac80211/status.c pr_err("ieee80211_tx_status: headroom too small\n"); pr_err 56 net/mac80211/trace.c pr_err("%pV", &vaf); pr_err 79 net/mac802154/main.c pr_err("failure to allocate master IEEE802.15.4 device\n"); pr_err 2754 net/mpls/af_mpls.c pr_err("Can't add mpls over gre tunnel ops\n"); pr_err 46 net/ncsi/ncsi-netlink.c pr_err("NCSI netlink: No device for ifindex %u\n", ifindex); pr_err 636 net/netfilter/core.c pr_err("cannot create netfilter proc entry"); pr_err 2236 net/netfilter/ipset/ip_set_core.c pr_err("ip_set: cannot register pernet_subsys.\n"); pr_err 2242 net/netfilter/ipset/ip_set_core.c pr_err("ip_set: cannot register with nfnetlink.\n"); pr_err 2249 net/netfilter/ipset/ip_set_core.c pr_err("SO_SET registry failed: %d\n", ret); pr_err 183 net/netfilter/ipvs/ip_vs_conn.c pr_err("%s(): request for already hashed, called from %pS\n", pr_err 530 net/netfilter/ipvs/ip_vs_core.c pr_err("Schedule: port zero only supported " pr_err 2464 net/netfilter/ipvs/ip_vs_core.c pr_err("can't setup control.\n"); pr_err 2472 net/netfilter/ipvs/ip_vs_core.c pr_err("can't setup connection table.\n"); pr_err 2486 net/netfilter/ipvs/ip_vs_core.c pr_err("can't register netlink/ioctl.\n"); pr_err 298 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): request for already hashed, called from %pS\n", pr_err 332 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): request for unhash flagged, called from %pS\n", pr_err 1036 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): server weight less than zero\n", __func__); pr_err 1041 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): lower threshold is higher than upper threshold\n", pr_err 1048 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): tunnel port is zero\n", __func__); pr_err 1107 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): server weight less than zero\n", __func__); pr_err 1112 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): lower threshold is higher than upper threshold\n", pr_err 1119 net/netfilter/ipvs/ip_vs_ctl.c pr_err("%s(): tunnel port is zero\n", __func__); pr_err 2496 net/netfilter/ipvs/ip_vs_ctl.c pr_err("set_ctl: invalid protocol: %d %pI4:%d\n", pr_err 2813 net/netfilter/ipvs/ip_vs_ctl.c pr_err("length: %u != %u\n", *len, size); pr_err 2854 net/netfilter/ipvs/ip_vs_ctl.c pr_err("length: %u != %u\n", *len, size); pr_err 3770 net/netfilter/ipvs/ip_vs_ctl.c pr_err("unknown Generic Netlink command\n"); pr_err 3840 net/netfilter/ipvs/ip_vs_ctl.c pr_err("not enough space in Netlink message\n"); pr_err 4153 net/netfilter/ipvs/ip_vs_ctl.c pr_err("cannot register sockopt.\n"); pr_err 4159 net/netfilter/ipvs/ip_vs_ctl.c pr_err("cannot register Generic Netlink interface.\n"); pr_err 82 net/netfilter/ipvs/ip_vs_pe.c pr_err("%s(): [%s] pe already existed " pr_err 457 net/netfilter/ipvs/ip_vs_proto_udp.c pr_err("UDP no ns data\n"); pr_err 48 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): init error\n", __func__); pr_err 172 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): NULL arg\n", __func__); pr_err 177 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): NULL scheduler_name\n", __func__); pr_err 190 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): [%s] scheduler already linked\n", pr_err 203 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): [%s] scheduler already existed " pr_err 226 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): NULL arg\n", __func__); pr_err 233 net/netfilter/ipvs/ip_vs_sched.c pr_err("%s(): [%s] scheduler is not in the list. failed\n", pr_err 586 net/netfilter/ipvs/ip_vs_sync.c pr_err("ip_vs_sync_buff_create failed.\n"); pr_err 708 net/netfilter/ipvs/ip_vs_sync.c pr_err("ip_vs_sync_buff_create failed.\n"); pr_err 1436 net/netfilter/ipvs/ip_vs_sync.c pr_err("You probably need to specify IP address on " pr_err 1485 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error during creation of socket; terminating\n"); pr_err 1491 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error setting outbound mcast interface\n"); pr_err 1508 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error binding address of the mcast interface\n"); pr_err 1516 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error connecting to the multicast addr\n"); pr_err 1542 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error during creation of socket; terminating\n"); pr_err 1556 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error binding to the multicast addr\n"); pr_err 1570 net/netfilter/ipvs/ip_vs_sync.c pr_err("Error joining to the multicast group\n"); pr_err 1609 net/netfilter/ipvs/ip_vs_sync.c pr_err("ip_vs_send_async error %d\n", ret); pr_err 1737 net/netfilter/ipvs/ip_vs_sync.c pr_err("receiving message error\n"); pr_err 1798 net/netfilter/ipvs/ip_vs_sync.c pr_err("Unknown mcast interface: %s\n", c->mcast_ifn); pr_err 2045 net/netfilter/ipvs/ip_vs_sync.c pr_err("Failed to stop Master Daemon\n"); pr_err 2049 net/netfilter/ipvs/ip_vs_sync.c pr_err("Failed to stop Backup Daemon\n"); pr_err 40 net/netfilter/nf_conntrack_acct.c pr_err("Unable to register extension\n"); pr_err 358 net/netfilter/nf_conntrack_ecache.c pr_err("Unable to register event extension\n"); pr_err 602 net/netfilter/nf_conntrack_ftp.c pr_err("failed to register helpers\n"); pr_err 575 net/netfilter/nf_conntrack_helper.c pr_err("nf_ct_helper: Unable to register helper extension.\n"); pr_err 238 net/netfilter/nf_conntrack_irc.c pr_err("max_dcc_channels must not be zero\n"); pr_err 243 net/netfilter/nf_conntrack_irc.c pr_err("max_dcc_channels must not be more than %u\n", pr_err 267 net/netfilter/nf_conntrack_irc.c pr_err("failed to register helpers\n"); pr_err 3571 net/netfilter/nf_conntrack_netlink.c pr_err("ctnetlink_init: cannot register notifier.\n"); pr_err 3577 net/netfilter/nf_conntrack_netlink.c pr_err("ctnetlink_init: cannot expect register notifier.\n"); pr_err 3621 net/netfilter/nf_conntrack_netlink.c pr_err("ctnetlink_init: cannot register with nfnetlink.\n"); pr_err 3627 net/netfilter/nf_conntrack_netlink.c pr_err("ctnetlink_init: cannot register exp with nfnetlink.\n"); pr_err 3633 net/netfilter/nf_conntrack_netlink.c pr_err("ctnetlink_init: cannot register pernet operations\n"); pr_err 209 net/netfilter/nf_conntrack_sane.c pr_err("failed to register helpers\n"); pr_err 1695 net/netfilter/nf_conntrack_sip.c pr_err("failed to register helpers\n"); pr_err 1176 net/netfilter/nf_conntrack_standalone.c pr_err("nf_conntrack: can't register to sysctl.\n"); pr_err 134 net/netfilter/nf_conntrack_tftp.c pr_err("failed to register helpers\n"); pr_err 148 net/netfilter/nf_conntrack_timeout.c pr_err("nf_ct_timeout: Unable to register timeout extension.\n"); pr_err 38 net/netfilter/nf_conntrack_timestamp.c pr_err("Unable to register extension\n"); pr_err 1167 net/netfilter/nf_nat_core.c pr_err("Unable to register extension\n"); pr_err 519 net/netfilter/nfnetlink_acct.c pr_err("nfnl_acct_init: failed to register pernet ops\n"); pr_err 525 net/netfilter/nfnetlink_acct.c pr_err("nfnl_acct_init: cannot register with nfnetlink.\n"); pr_err 777 net/netfilter/nfnetlink_cthelper.c pr_err("nfnl_cthelper: cannot register with nfnetlink.\n"); pr_err 611 net/netfilter/nfnetlink_cttimeout.c pr_err("cttimeout_init: cannot register cttimeout with " pr_err 1157 net/netfilter/nfnetlink_log.c pr_err("failed to register pernet ops\n"); pr_err 1164 net/netfilter/nfnetlink_log.c pr_err("failed to create netlink socket\n"); pr_err 1170 net/netfilter/nfnetlink_log.c pr_err("failed to register logger\n"); pr_err 407 net/netfilter/nfnetlink_osf.c pr_err("Failed to register OSF nsfnetlink helper (%d)\n", err); pr_err 1546 net/netfilter/nfnetlink_queue.c pr_err("failed to register pernet ops\n"); pr_err 1553 net/netfilter/nfnetlink_queue.c pr_err("failed to create netlink socket\n"); pr_err 1559 net/netfilter/nfnetlink_queue.c pr_err("failed to register netdevice notifier\n"); pr_err 639 net/netfilter/nft_compat.c pr_err("nft_compat: unsupported protocol %d\n", pr_err 877 net/netfilter/nft_compat.c pr_err("nft_compat: cannot register with nfnetlink.\n"); pr_err 53 net/netfilter/xt_osf.c pr_err("Failed to register OS fingerprint " pr_err 1364 net/netrom/af_netrom.c pr_err("NET/ROM: %s - nr_ndevs parameter too large\n", pr_err 1372 net/netrom/af_netrom.c pr_err("NET/ROM: %s - unable to allocate device array\n", pr_err 125 net/nfc/core.c pr_err("SE discovery failed\n"); pr_err 1119 net/nfc/core.c pr_err("Could not register llcp device\n"); pr_err 16 net/nfc/digital.h #define PROTOCOL_ERR(req) pr_err("%d: NFC Digital Protocol error: %s\n", \ pr_err 207 net/nfc/digital_core.c pr_err("Unknown cmd type %d\n", cmd->type); pr_err 214 net/nfc/digital_core.c pr_err("in_send_command returned err %d\n", rc); pr_err 261 net/nfc/digital_core.c pr_err("in_configure_hw failed: %d\n", rc); pr_err 272 net/nfc/digital_core.c pr_err("tg_configure_hw failed: %d\n", rc); pr_err 366 net/nfc/digital_core.c pr_err("Invalid protocol %d\n", protocol); pr_err 481 net/nfc/digital_core.c pr_err("Unknown protocol\n"); pr_err 486 net/nfc/digital_core.c pr_err("Already polling\n"); pr_err 491 net/nfc/digital_core.c pr_err("A target is already active\n"); pr_err 538 net/nfc/digital_core.c pr_err("Unsupported protocols: im=0x%x, tm=0x%x\n", pr_err 555 net/nfc/digital_core.c pr_err("Polling operation was not running\n"); pr_err 619 net/nfc/digital_core.c pr_err("Can't activate a target while polling\n"); pr_err 624 net/nfc/digital_core.c pr_err("A target is already active\n"); pr_err 640 net/nfc/digital_core.c pr_err("No active target\n"); pr_err 795 net/nfc/digital_core.c pr_err("nfc_allocate_device failed\n"); pr_err 1446 net/nfc/digital_dep.c pr_err("Unsupported dsi value %d\n", dsi); pr_err 181 net/nfc/digital_technology.c pr_err("ISO_DEP R-block and S-block not supported\n"); pr_err 186 net/nfc/digital_technology.c pr_err("DID field in ISO_DEP PCB not supported\n"); pr_err 388 net/nfc/hci/core.c pr_err("Discarded event %x to invalid pipe %x\n", event, pipe); pr_err 394 net/nfc/hci/core.c pr_err("Discarded event %x to unopened pipe %x\n", event, pipe); pr_err 133 net/nfc/hci/hcp.c pr_err("UNKNOWN MSG Type %d, instruction=%d\n", pr_err 498 net/nfc/hci/llc_shdlc.c pr_err("UNKNOWN Control=%d\n", control); pr_err 728 net/nfc/hci/llc_shdlc.c pr_err("NULL Frame -> link is dead\n"); pr_err 225 net/nfc/llcp_commands.c pr_err("Invalid gt tlv value 0x%x\n", type); pr_err 267 net/nfc/llcp_commands.c pr_err("Invalid gt tlv value 0x%x\n", type); pr_err 323 net/nfc/llcp_commands.c pr_err("Could not allocate PDU\n"); pr_err 455 net/nfc/llcp_commands.c pr_err("error %d\n", err); pr_err 515 net/nfc/llcp_commands.c pr_err("error %d\n", err); pr_err 663 net/nfc/llcp_commands.c pr_err("Pending queue is full %d frames\n", pr_err 671 net/nfc/llcp_commands.c pr_err("Tx queue is full %d frames\n", pr_err 766 net/nfc/llcp_commands.c pr_err("Could not allocate PDU (error=%d)\n", err); pr_err 237 net/nfc/llcp_core.c pr_err("SYMM timeout\n"); pr_err 624 net/nfc/llcp_core.c pr_err("No LLCP device\n"); pr_err 633 net/nfc/llcp_core.c pr_err("MAC does not support LLCP\n"); pr_err 871 net/nfc/llcp_core.c pr_err("Receive queue is full\n"); pr_err 1062 net/nfc/llcp_core.c pr_err("Received out of sequence I PDU\n"); pr_err 1072 net/nfc/llcp_core.c pr_err("Receive queue is full\n"); pr_err 1169 net/nfc/llcp_core.c pr_err("Invalid CC\n"); pr_err 1247 net/nfc/llcp_core.c pr_err("Wrong SNL SAP\n"); pr_err 1347 net/nfc/llcp_core.c pr_err("Invalid SNL tlv value 0x%x\n", type); pr_err 1370 net/nfc/llcp_core.c pr_err("Malformed AGF PDU\n"); pr_err 1382 net/nfc/llcp_core.c pr_err("Malformed AGF PDU\n"); pr_err 1393 net/nfc/llcp_core.c pr_err("Could not allocate PDU\n"); pr_err 1506 net/nfc/llcp_core.c pr_err("err %d\n", err); pr_err 827 net/nfc/llcp_sock.c pr_err("Recv datagram failed state %d %d %d", pr_err 945 net/nfc/llcp_sock.c pr_err("Freeing alive NFC LLCP socket %p\n", sk); pr_err 129 net/nfc/nci/core.c pr_err("wait_for_completion_interruptible_timeout failed %ld\n", pr_err 788 net/nfc/nci/core.c pr_err("unable to start poll, since poll is already active\n"); pr_err 793 net/nfc/nci/core.c pr_err("there is an active target\n"); pr_err 811 net/nfc/nci/core.c pr_err("failed to set local general bytes\n"); pr_err 819 net/nfc/nci/core.c pr_err("failed to set listen parameters\n"); pr_err 839 net/nfc/nci/core.c pr_err("unable to stop poll, since poll is not active\n"); pr_err 860 net/nfc/nci/core.c pr_err("there is no available target to activate\n"); pr_err 865 net/nfc/nci/core.c pr_err("there is already an active target\n"); pr_err 877 net/nfc/nci/core.c pr_err("unable to find the selected target\n"); pr_err 882 net/nfc/nci/core.c pr_err("target does not support the requested protocol 0x%x\n", pr_err 923 net/nfc/nci/core.c pr_err("unable to deactivate target, no active target\n"); pr_err 980 net/nfc/nci/core.c pr_err("error when signaling tm deactivation\n"); pr_err 1002 net/nfc/nci/core.c pr_err("unable to exchange data, no active target\n"); pr_err 1027 net/nfc/nci/core.c pr_err("unable to send data\n"); pr_err 1137 net/nfc/nci/core.c pr_err("Too many proprietary commands: %zd\n", pr_err 1324 net/nfc/nci/core.c pr_err("no memory for command\n"); pr_err 1485 net/nfc/nci/core.c pr_err("unknown MT 0x%x\n", nci_mt(skb->data)); pr_err 52 net/nfc/nci/data.c pr_err("no rx callback, dropping rx data...\n"); pr_err 190 net/nfc/nci/data.c pr_err("failed to fragment tx data packet\n"); pr_err 227 net/nfc/nci/data.c pr_err("error adding room for accumulated rx data\n"); pr_err 260 net/nfc/nci/data.c pr_err("unable to handle received data\n"); pr_err 400 net/nfc/nci/hci.c pr_err("UNKNOWN MSG Type %d, instruction=%d\n", pr_err 211 net/nfc/nci/ntf.c pr_err("the target found does not have the desired protocol\n"); pr_err 248 net/nfc/nci/ntf.c pr_err("unsupported rf_tech_and_mode 0x%x\n", rf_tech_and_mode); pr_err 345 net/nfc/nci/ntf.c pr_err("unsupported rf_tech_and_mode 0x%x\n", pr_err 395 net/nfc/nci/ntf.c pr_err("unsupported activation_rf_tech_and_mode 0x%x\n", pr_err 431 net/nfc/nci/ntf.c pr_err("unsupported activation_rf_tech_and_mode 0x%x\n", pr_err 496 net/nfc/nci/ntf.c pr_err("unsupported activation_rf_tech_and_mode 0x%x\n", pr_err 572 net/nfc/nci/ntf.c pr_err("unsupported activation_rf_tech_and_mode 0x%x\n", pr_err 607 net/nfc/nci/ntf.c pr_err("unsupported rf_interface 0x%x\n", pr_err 631 net/nfc/nci/ntf.c pr_err("unable to store general bytes\n"); pr_err 661 net/nfc/nci/ntf.c pr_err("error when signaling tm activation\n"); pr_err 751 net/nfc/nci/ntf.c pr_err("unsupported ntf opcode 0x%x\n", pr_err 792 net/nfc/nci/ntf.c pr_err("unknown ntf opcode 0x%x\n", ntf_opcode); pr_err 304 net/nfc/nci/rsp.c pr_err("unsupported rsp opcode 0x%x\n", pr_err 357 net/nfc/nci/rsp.c pr_err("unknown rsp opcode 0x%x\n", rsp_opcode); pr_err 412 net/nfc/nci/uart.c pr_err("driver %d is already registered\n", nu->driver); pr_err 320 net/nfc/rawsock.c pr_err("Freeing alive NFC raw socket %p\n", sk); pr_err 1877 net/openvswitch/conntrack.c pr_err("openvswitch: failed to init nf_conncount %d\n", err); pr_err 1290 net/packet/af_packet.c pr_err("Attempt to release alive packet socket: %p\n", sk); pr_err 2530 net/packet/af_packet.c pr_err("Packet exceed the number of skb frags(%lu)\n", pr_err 2575 net/packet/af_packet.c pr_err("packet size is too long (%d > %d)\n", tp_len, size_max); pr_err 4426 net/packet/af_packet.c pr_err("packet_mmap: vma is busy: %d\n", pr_err 307 net/qrtr/qrtr.c pr_err("qrtr: Invalid version %d\n", ver); pr_err 150 net/qrtr/tun.c pr_err("failed to register Qualcomm IPC Router tun device\n"); pr_err 174 net/rds/ib.c pr_err("RDS/IB: %s failed to allocate vector memory\n", pr_err 302 net/rds/ib_frmr.c pr_err("RDS/IB: %s returned error(%d)\n", __func__, ret); pr_err 1256 net/rxrpc/ar-internal.h pr_err("Assertion failed\n"); \ pr_err 1266 net/rxrpc/ar-internal.h pr_err("Assertion failed - %lu(0x%lx) %s %lu(0x%lx) is false\n", \ pr_err 1276 net/rxrpc/ar-internal.h pr_err("Assertion failed\n"); \ pr_err 1286 net/rxrpc/ar-internal.h pr_err("Assertion failed - %lu(0x%lx) %s %lu(0x%lx) is false\n", \ pr_err 638 net/rxrpc/call_object.c pr_err("Call %p still in use (%d,%s,%lx,%lx)!\n", pr_err 155 net/rxrpc/conn_client.c pr_err("AF_RXRPC: Leaked client conn %p {%d}\n", pr_err 472 net/rxrpc/conn_object.c pr_err("AF_RXRPC: Leaked conn %p {%d}\n", pr_err 813 net/rxrpc/key.c pr_err("Unknown token type %x on rxrpc key\n", pr_err 507 net/rxrpc/local_object.c pr_err("AF_RXRPC: Leaked local %p {%d}\n", pr_err 476 net/rxrpc/peer_object.c pr_err("Leaked peer %u {%u} %pISp\n", pr_err 92 net/rxrpc/recvmsg.c pr_err("Invalid terminal call state %u\n", call->state); pr_err 948 net/sched/act_ct.c pr_err("act_ct: Failed to set connlabels length"); pr_err 429 net/sched/act_ipt.c pr_err("Failed to load xt action\n"); pr_err 433 net/sched/act_ipt.c pr_err("Failed to load ipt action\n"); pr_err 223 net/sched/cls_bpf.c pr_err("Stopping hardware offload failed: %d\n", err); pr_err 63 net/sched/em_ipt.c pr_err("only policy match revision 0 supported"); pr_err 68 net/sched/em_ipt.c pr_err("policy can only be matched on NF_INET_PRE_ROUTING"); pr_err 78 net/sched/em_ipt.c pr_err("only addrtype match revision 1 supported"); pr_err 111 net/sched/em_ipt.c pr_err("Unsupported xt match"); pr_err 155 net/sched/em_ipt.c pr_err("unable to load match\n"); pr_err 2269 net/sched/sch_api.c pr_err("pktsched_init: " pr_err 338 net/sched/sch_atm.c pr_err("atm_tc_delete: flow->ref == %d\n", flow->ref); pr_err 594 net/sched/sch_atm.c pr_err("atm_destroy: %p->ref = %d\n", flow, flow->ref); pr_err 1363 net/sched/sch_htb.c pr_err("htb: tree is too deep\n"); pr_err 454 net/sctp/ipv6.c pr_err("%s: Failed to copy ip options\n", __func__); pr_err 191 net/sctp/protocol.c pr_err("%s: Failed to copy ip options\n", __func__); pr_err 836 net/sctp/protocol.c pr_err("Failed to create the SCTP control socket\n"); pr_err 1352 net/sctp/protocol.c pr_err("Failed to initialize the SCTP control sock\n"); pr_err 1456 net/sctp/protocol.c pr_err("Failed endpoint_hash alloc\n"); pr_err 1476 net/sctp/protocol.c pr_err("Failed bind hash alloc\n"); pr_err 1231 net/sctp/sm_sideeffect.c pr_err("bug in state %d, event_type %d, event_id %d\n", pr_err 1237 net/sctp/sm_sideeffect.c pr_err("impossible disposition %d in state %d, event_type %d, event_id %d\n", pr_err 2044 net/smc/af_smc.c pr_err("%s: smc_llc_init fails with %d\n", __func__, rc); pr_err 2050 net/smc/af_smc.c pr_err("%s: smc_cdc_init fails with %d\n", __func__, rc); pr_err 2056 net/smc/af_smc.c pr_err("%s: proto_register(v4) fails with %d\n", __func__, rc); pr_err 2062 net/smc/af_smc.c pr_err("%s: proto_register(v6) fails with %d\n", __func__, rc); pr_err 2068 net/smc/af_smc.c pr_err("%s: sock_register fails with %d\n", __func__, rc); pr_err 2076 net/smc/af_smc.c pr_err("%s: ib_register fails with %d\n", __func__, rc); pr_err 599 net/socket.c pr_err("%s: fasync list not empty!\n", __func__); pr_err 606 net/sunrpc/xprtrdma/rpc_rdma.c pr_err("rpcrdma: failed to DMA map a Send buffer\n"); pr_err 721 net/sunrpc/xprtrdma/rpc_rdma.c pr_err("rpcrdma: failed to DMA map a Send buffer\n"); pr_err 726 net/sunrpc/xprtrdma/rpc_rdma.c pr_err("rpcrdma: too many Send SGEs (%u)\n", sge_no); pr_err 196 net/sunrpc/xprtrdma/transport.c pr_err("rpcrdma: Unrecognized address family\n"); pr_err 371 net/sunrpc/xprtrdma/verbs.c pr_err("rpcrdma: ib_alloc_pd() returned %d\n", rc); pr_err 381 net/sunrpc/xprtrdma/verbs.c pr_err("rpcrdma: Device %s does not support memreg mode %d\n", pr_err 622 net/sunrpc/xprtrdma/verbs.c pr_err("rpcrdma: rpcrdma_ep_create returned %d\n", err); pr_err 630 net/sunrpc/xprtrdma/verbs.c pr_err("rpcrdma: rdma_create_qp returned %d\n", err); pr_err 672 net/sunrpc/xprtrdma/verbs.c pr_err("rpcrdma: can't reconnect on different device!\n"); pr_err 403 net/tipc/bcast.c pr_err("Unable to send SYN: method %d, rc %d\n", pr_err 172 net/tipc/core.c pr_err("Unable to start in single node mode\n"); pr_err 701 net/tipc/link.c pr_err("Unknown FSM state %x in %s\n", l->state, l->name); pr_err 706 net/tipc/link.c pr_err("Illegal FSM event %x in state %x on link %s\n", pr_err 220 net/tipc/name_distr.c pr_err("Unable to remove publication from failed node\n" pr_err 661 net/tipc/name_table.c pr_err("Failed to remove local publication {%u,%u,%u}/%u\n", pr_err 290 net/tipc/netlink.c pr_err("Failed to register netlink interface\n"); pr_err 1335 net/tipc/netlink_compat.c pr_err("Failed to register legacy compat interface\n"); pr_err 1308 net/tipc/node.c pr_err("Unknown node fsm state %x\n", state); pr_err 1316 net/tipc/node.c pr_err("Illegal node fsm evt %x in state %x\n", evt, state); pr_err 2095 net/tipc/socket.c pr_err("Unknown sk_state %u\n", sk->sk_state); pr_err 3249 net/tipc/socket.c pr_err("Failed to register TIPC protocol type\n"); pr_err 3255 net/tipc/socket.c pr_err("Failed to register TIPC socket type\n"); pr_err 621 net/tipc/topsrv.c pr_err("can't start tipc receive workqueue\n"); pr_err 627 net/tipc/topsrv.c pr_err("can't start tipc send workqueue\n"); pr_err 132 net/tipc/udp_media.c pr_err("Invalid UDP media address\n"); pr_err 636 net/tipc/udp_media.c pr_err("Can't add remote ip to TIPC UDP multicast bearer\n"); pr_err 681 net/tipc/udp_media.c pr_err("Invalid UDP bearer configuration"); pr_err 818 net/tipc/udp_media.c pr_err("UDP bearer instance not found\n"); pr_err 1890 net/vmw_vsock/af_vsock.c pr_err("Unknown ioctl %d\n", cmd); pr_err 1946 net/vmw_vsock/af_vsock.c pr_err("Failed to register misc device\n"); pr_err 1952 net/vmw_vsock/af_vsock.c pr_err("Cannot register vsock protocol\n"); pr_err 1958 net/vmw_vsock/af_vsock.c pr_err("could not register af_vsock (%d) address family: %d\n", pr_err 579 net/vmw_vsock/vmci_transport.c pr_err("Could not attach to queue pair with %d\n", pr_err 727 net/vmw_vsock/vmci_transport.c pr_err("unable to send reset\n"); pr_err 784 net/vmw_vsock/vmci_transport.c pr_err("unable to send reset\n"); pr_err 1239 net/vmw_vsock/vmci_transport.c pr_err("Could not send attach\n"); pr_err 2044 net/vmw_vsock/vmci_transport.c pr_err("Can't set both an old and new protocol\n"); pr_err 2057 net/vmw_vsock/vmci_transport.c pr_err("Unknown notify protocol version\n"); pr_err 2128 net/vmw_vsock/vmci_transport.c pr_err("Unable to create datagram handle. (%d)\n", err); pr_err 2136 net/vmw_vsock/vmci_transport.c pr_err("Unable to subscribe to resumed event. (%d)\n", err); pr_err 2164 net/vmw_vsock/vmci_transport.c pr_err("Couldn't destroy datagram handle\n"); pr_err 290 net/vmw_vsock/vmci_transport_notify.c pr_err("%p unable to send read notify to peer\n", sk); pr_err 586 net/vmw_vsock/vmci_transport_notify.c pr_err("%p unable to send wrote notify to peer\n", sk); pr_err 131 net/vmw_vsock/vmci_transport_notify_qstate.c pr_err("%p unable to send read notification to peer\n", pr_err 333 net/vmw_vsock/vmci_transport_notify_qstate.c pr_err("%p unable to send wrote notification to peer\n", pr_err 125 net/wimax/id-table.c pr_err("BUG: %s wimax_dev %p ifindex %d not cleared\n", pr_err 177 net/wimax/op-msg.c pr_err("Cannot find attribute WIMAX_GNL_MSG_DATA\n"); pr_err 199 net/wimax/op-msg.c pr_err("Cannot find attribute WIMAX_GNL_MSG_DATA\n"); pr_err 220 net/wimax/op-msg.c pr_err("Cannot find attribute WIMAX_GNL_MSG_DATA\n"); pr_err 331 net/wimax/op-msg.c pr_err("WIMAX_GNL_MSG_FROM_USER: can't find IFIDX attribute\n"); pr_err 95 net/wimax/op-reset.c pr_err("WIMAX_GNL_OP_RFKILL: can't find IFIDX attribute\n"); pr_err 408 net/wimax/op-rfkill.c pr_err("WIMAX_GNL_OP_RFKILL: can't find IFIDX attribute\n"); pr_err 39 net/wimax/op-state-get.c pr_err("WIMAX_GNL_OP_STATE_GET: can't find IFIDX attribute\n"); pr_err 179 net/wimax/stack.c pr_err("SW BUG! Forbidden state change %u -> %u\n", pr_err 583 net/wimax/stack.c pr_err("cannot register generic netlink family: %d\n", result); pr_err 1284 net/wireless/core.c pr_err("failed to add phy80211 symlink to netdev!\n"); pr_err 750 net/wireless/reg.c pr_err("Problem loading in-kernel X.509 certificate (%ld)\n", pr_err 763 net/wireless/reg.c pr_err("Problem parsing in-kernel X.509 certificate list\n"); pr_err 870 net/wireless/reg.c pr_err("Invalid regulatory WMM rule %u-%u in domain %c%c\n", pr_err 3513 net/wireless/reg.c pr_err("Invalid regulatory domain detected: %c%c\n", pr_err 3550 net/wireless/reg.c pr_err("Invalid regulatory domain detected: %c%c\n", pr_err 3609 net/wireless/reg.c pr_err("Invalid regulatory domain detected: %c%c\n", pr_err 3980 net/wireless/reg.c pr_err("kobject_uevent_env() was unable to call CRDA during init\n"); pr_err 156 net/x25/x25_dev.c pr_err("x25_dev: out of memory\n"); pr_err 191 net/x25/x25_dev.c pr_err("x25_dev: out of memory\n"); pr_err 148 net/x25/x25_subr.c pr_err("invalid frame type %02X\n", frametype); pr_err 952 net/xfrm/xfrm_interface.c pr_err("xfrmi init: failed to register %s\n", msg); pr_err 55 samples/connector/cn_test.c pr_err("failed to allocate new skb with size=%u\n", size); pr_err 103 samples/kprobes/kprobe_example.c pr_err("register_kprobe failed, returned %d\n", ret); pr_err 86 samples/kprobes/kretprobe_example.c pr_err("register_kretprobe failed, returned %d\n", ret); pr_err 342 samples/qmi/qmi_sample_client.c pr_err("spurious ping response\n"); pr_err 413 samples/qmi/qmi_sample_client.c pr_err("response data doesn't match expectation\n"); pr_err 474 samples/qmi/qmi_sample_client.c pr_err("failed to connect to remote service port\n"); pr_err 585 samples/qmi/qmi_sample_client.c pr_err("failed to create qmi_sample dir\n"); pr_err 1450 samples/vfio-mdev/mbochs.c pr_err("Error: failed to register mbochs_dev, err: %d\n", ret); pr_err 1459 samples/vfio-mdev/mbochs.c pr_err("Error: failed to register mbochs_dev class\n"); pr_err 757 samples/vfio-mdev/mdpy.c pr_err("Error: failed to register mdpy_dev, err: %d\n", ret); pr_err 766 samples/vfio-mdev/mdpy.c pr_err("Error: failed to register mdpy_dev class\n"); pr_err 326 samples/vfio-mdev/mtty.c pr_err("Serial port %d: Fifo level trigger\n", pr_err 333 samples/vfio-mdev/mtty.c pr_err("Serial port %d: Buffer Overflow\n", index); pr_err 359 samples/vfio-mdev/mtty.c pr_err("Serial port %d: IER_THRI write\n", pr_err 431 samples/vfio-mdev/mtty.c pr_err("Serial port %d: MCR_OUT2 write\n", index); pr_err 439 samples/vfio-mdev/mtty.c pr_err("Serial port %d: MCR RTS/DTR write\n", index); pr_err 488 samples/vfio-mdev/mtty.c pr_err("Serial port %d: Buffer Empty\n", index); pr_err 647 samples/vfio-mdev/mtty.c pr_err("%s mdev_state not found\n", __func__); pr_err 1038 samples/vfio-mdev/mtty.c pr_err("%s: eventfd signal failed (%d)\n", __func__, ret); pr_err 1423 samples/vfio-mdev/mtty.c pr_err("Error: failed to register mtty_dev, err:%d\n", ret); pr_err 1435 samples/vfio-mdev/mtty.c pr_err("Error: failed to register mtty_dev class\n"); pr_err 206 security/apparmor/match.c pr_err("AppArmor DFA next/check upper bounds error\n"); pr_err 52 security/integrity/digsig.c pr_err("no %s keyring: %d\n", keyring_name[id], err); pr_err 161 security/integrity/digsig.c pr_err("Problem loading X.509 certificate %d\n", rc); pr_err 182 security/integrity/digsig.c pr_err("Unable to open file: %s (%d)", path, rc); pr_err 40 security/integrity/digsig_asymmetric.c pr_err("Key '%s' is in ima_blacklist_keyring\n", name); pr_err 69 security/integrity/evm/evm_crypto.c pr_err("key initialization failed\n"); pr_err 104 security/integrity/evm/evm_crypto.c pr_err("Can not allocate %s (reason: %ld)\n", algo, pr_err 225 security/integrity/iint.c pr_err("Unable to create integrity sysfs dir: %d\n", pr_err 69 security/integrity/ima/ima_crypto.c pr_err("Can not allocate %s (reason: %ld)\n", pr_err 90 security/integrity/ima/ima_crypto.c pr_err("Can not allocate %s (reason: %d)\n", pr_err 180 security/integrity/ima/ima_crypto.c pr_err("Can not allocate %s (reason: %d)\n", pr_err 654 security/integrity/ima/ima_crypto.c pr_err("Error Communicating to TPM chip\n"); pr_err 290 security/integrity/ima/ima_fs.c pr_err("Unable to open file: %s (%d)", path, rc); pr_err 339 security/integrity/ima/ima_fs.c pr_err("signed policy file (specified as an absolute pathname) required\n"); pr_err 106 security/integrity/ima/ima_kexec.c pr_err("Binary measurement list too large.\n"); pr_err 113 security/integrity/ima/ima_kexec.c pr_err("Not enough memory for the kexec measurement buffer.\n"); pr_err 122 security/integrity/ima/ima_kexec.c pr_err("Error passing over kexec measurement buffer.\n"); pr_err 128 security/integrity/ima/ima_kexec.c pr_err("Error passing over kexec measurement buffer.\n"); pr_err 152 security/integrity/ima/ima_kexec.c pr_err("Failed to restore the measurement list: %d\n", pr_err 552 security/integrity/ima/ima_main.c pr_err("Prevent firmware loading_store.\n"); pr_err 595 security/integrity/ima/ima_main.c pr_err("impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall.\n"); pr_err 600 security/integrity/ima/ima_main.c pr_err("impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall.\n"); pr_err 606 security/integrity/ima/ima_main.c pr_err("Prevent firmware sysfs fallback loading.\n"); pr_err 615 security/integrity/ima/ima_main.c pr_err("impossible to appraise a module without a file descriptor. sig_enforce kernel parameter might help\n"); pr_err 342 security/integrity/ima/ima_policy.c pr_err("lsm rule update error %d\n", result); pr_err 102 security/integrity/ima/ima_queue.c pr_err("OUT OF MEMORY ERROR creating queue entry\n"); pr_err 152 security/integrity/ima/ima_queue.c pr_err("Error Communicating to TPM chip, result: %d\n", result); pr_err 96 security/integrity/ima/ima_template.c pr_err("template %s not found, using %s\n", pr_err 107 security/integrity/ima/ima_template.c pr_err("template does not support hash alg\n"); pr_err 124 security/integrity/ima/ima_template.c pr_err("format string '%s' not valid, using template %s\n", pr_err 196 security/integrity/ima/ima_template.c pr_err("format string '%s' contains too many fields\n", pr_err 207 security/integrity/ima/ima_template.c pr_err("Invalid field with length %d\n", len); pr_err 215 security/integrity/ima/ima_template.c pr_err("field '%s' not found\n", tmp_field_id); pr_err 266 security/integrity/ima/ima_template.c pr_err("template %s init failed, result: %d\n", pr_err 280 security/integrity/ima/ima_template.c pr_err("attempting to initialize the template \"%s\" failed\n", pr_err 376 security/integrity/ima/ima_template.c pr_err("attempting to restore a incompatible measurement list"); pr_err 381 security/integrity/ima/ima_template.c pr_err("attempting to restore too many measurements"); pr_err 405 security/integrity/ima/ima_template.c pr_err("attempting to restore a template name that is too long\n"); pr_err 416 security/integrity/ima/ima_template.c pr_err("attempting to restore an unsupported template \"%s\" failed\n", pr_err 437 security/integrity/ima/ima_template.c pr_err("attempting to restore the template fmt \"%s\" failed\n", pr_err 208 security/integrity/ima/ima_template_lib.c pr_err("%s: nr of fields mismatch: expected: %d, current: %d\n", pr_err 214 security/integrity/ima/ima_template_lib.c pr_err("%s: buf end mismatch: expected: %p, current: %p\n", pr_err 53 security/integrity/platform_certs/load_uefi.c pr_err("Couldn't get size: 0x%lx\n", *status); pr_err 64 security/integrity/platform_certs/load_uefi.c pr_err("Error reading db var: 0x%lx\n", *status); pr_err 164 security/integrity/platform_certs/load_uefi.c pr_err("MODSIGN: Couldn't get UEFI db list\n"); pr_err 169 security/integrity/platform_certs/load_uefi.c pr_err("Couldn't parse db signatures: %d\n", pr_err 185 security/integrity/platform_certs/load_uefi.c pr_err("Couldn't parse MokListRT signatures: %d\n", rc); pr_err 200 security/integrity/platform_certs/load_uefi.c pr_err("Couldn't parse dbx signatures: %d\n", rc); pr_err 420 security/keys/big_key.c pr_err("Can't alloc crypto: %d\n", ret); pr_err 432 security/keys/big_key.c pr_err("Can't set crypto auth tag len: %d\n", ret); pr_err 438 security/keys/big_key.c pr_err("Can't register type: %d\n", ret); pr_err 87 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: failed to alloc_cipher (%ld)\n", pr_err 109 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: key description must be %d hexadecimal " pr_err 116 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: key description must contain " pr_err 191 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: insufficient parameters specified\n"); pr_err 347 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: can't alloc %s transform: %ld\n", pr_err 398 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: failed to load %s transform (%ld)\n", pr_err 405 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: failed to setkey (%d)\n", ret); pr_err 412 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: failed to allocate request for %s\n", pr_err 493 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: failed to encrypt (%d)\n", ret); pr_err 631 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: keylen for the ecryptfs format must be equal to %d bytes\n", pr_err 639 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: enc32 key payload incorrect length: %d\n", pr_err 706 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: bad hmac (%d)\n", ret); pr_err 716 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: failed to decrypt key (%d)\n", ret); pr_err 995 security/keys/encrypted-keys/encrypted.c pr_err("encrypted_key: can't allocate %s transform: %ld\n", pr_err 1649 security/selinux/hooks.c pr_err("SELinux: out of range capability %d\n", cap); pr_err 3245 security/selinux/hooks.c pr_err("SELinux: unable to map context to SID" pr_err 94 security/selinux/netlink.c pr_err("SELinux: OOM in %s\n", __func__); pr_err 511 security/selinux/selinuxfs.c pr_err("SELinux: failed to load policy booleans\n"); pr_err 517 security/selinux/selinuxfs.c pr_err("SELinux: failed to load policy classes\n"); pr_err 523 security/selinux/selinuxfs.c pr_err("SELinux: failed to load policy capabilities\n"); pr_err 616 security/selinux/selinuxfs.c pr_err("SELinux: %s: context size (%u) exceeds " pr_err 952 security/selinux/selinuxfs.c pr_err("SELinux: %s: context size (%u) exceeds " pr_err 1143 security/selinux/selinuxfs.c pr_err("SELinux: %s: context size (%u) exceeds " pr_err 2003 security/selinux/selinuxfs.c pr_err("SELinux: %s: failed while creating inodes\n", pr_err 2062 security/selinux/selinuxfs.c pr_err("selinuxfs: could not mount!\n"); pr_err 2069 security/selinux/selinuxfs.c pr_err("selinuxfs: could not lookup null!\n"); pr_err 408 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 413 security/selinux/ss/avtab.c pr_err("SELinux: avtab: entry overflow\n"); pr_err 419 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 427 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated source type\n"); pr_err 433 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated target type\n"); pr_err 439 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated target class\n"); pr_err 447 security/selinux/ss/avtab.c pr_err("SELinux: avtab: null entry\n"); pr_err 452 security/selinux/ss/avtab.c pr_err("SELinux: avtab: entry has both access vectors and types\n"); pr_err 456 security/selinux/ss/avtab.c pr_err("SELinux: avtab: entry has extended permissions\n"); pr_err 471 security/selinux/ss/avtab.c pr_err("SELinux: avtab: entry only had %d items, expected %d\n", pr_err 480 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 493 security/selinux/ss/avtab.c pr_err("SELinux: avtab: invalid type or class\n"); pr_err 503 security/selinux/ss/avtab.c pr_err("SELinux: avtab: more than one specifier\n"); pr_err 509 security/selinux/ss/avtab.c pr_err("SELinux: avtab: policy version %u does not " pr_err 517 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 522 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 527 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 536 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated entry\n"); pr_err 543 security/selinux/ss/avtab.c pr_err("SELinux: avtab: invalid type\n"); pr_err 564 security/selinux/ss/avtab.c pr_err("SELinux: avtab: truncated table\n"); pr_err 569 security/selinux/ss/avtab.c pr_err("SELinux: avtab: table is empty\n"); pr_err 582 security/selinux/ss/avtab.c pr_err("SELinux: avtab: out of memory\n"); pr_err 584 security/selinux/ss/avtab.c pr_err("SELinux: avtab: duplicate entry\n"); pr_err 97 security/selinux/ss/conditional.c pr_err("SELinux: expression result was undefined - disabling all rules.\n"); pr_err 284 security/selinux/ss/conditional.c pr_err("SELinux: type rule already exists outside of a conditional.\n"); pr_err 299 security/selinux/ss/conditional.c pr_err("SELinux: too many conflicting type rules.\n"); pr_err 310 security/selinux/ss/conditional.c pr_err("SELinux: conflicting type rules.\n"); pr_err 316 security/selinux/ss/conditional.c pr_err("SELinux: conflicting type rules when adding type rule for true.\n"); pr_err 324 security/selinux/ss/conditional.c pr_err("SELinux: could not insert rule.\n"); pr_err 384 security/selinux/ss/conditional.c pr_err("SELinux: conditional expressions uses unknown operator.\n"); pr_err 389 security/selinux/ss/conditional.c pr_err("SELinux: conditional expressions uses unknown bool.\n"); pr_err 367 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap: map size %u does not " pr_err 388 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap: truncated map\n"); pr_err 394 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap start bit (%d) is " pr_err 400 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap start bit (%d) is " pr_err 410 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap: out of memory\n"); pr_err 422 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap: start bit %d" pr_err 430 security/selinux/ss/ebitmap.c pr_err("SELinux: ebitmap: truncated map\n"); pr_err 857 security/selinux/ss/policydb.c pr_err("SELinux: out of memory on SID table init\n"); pr_err 865 security/selinux/ss/policydb.c pr_err("SELinux: SID %s was never defined.\n", pr_err 871 security/selinux/ss/policydb.c pr_err("SELinux: Initial SID %s out of range.\n", pr_err 879 security/selinux/ss/policydb.c pr_err("SELinux: unable to load initial SID %s.\n", pr_err 973 security/selinux/ss/policydb.c pr_err("SELinux: mls: range overflow\n"); pr_err 979 security/selinux/ss/policydb.c pr_err("SELinux: mls: truncated range\n"); pr_err 991 security/selinux/ss/policydb.c pr_err("SELinux: mls: error reading low categories\n"); pr_err 997 security/selinux/ss/policydb.c pr_err("SELinux: mls: error reading high categories\n"); pr_err 1003 security/selinux/ss/policydb.c pr_err("SELinux: mls: out of memory\n"); pr_err 1028 security/selinux/ss/policydb.c pr_err("SELinux: context truncated\n"); pr_err 1037 security/selinux/ss/policydb.c pr_err("SELinux: error reading MLS range of context\n"); pr_err 1044 security/selinux/ss/policydb.c pr_err("SELinux: invalid security context\n"); pr_err 1320 security/selinux/ss/policydb.c pr_err("SELinux: unknown common %s\n", pr_err 1413 security/selinux/ss/policydb.c pr_err("SELinux: Role %s has wrong value %d\n", pr_err 1491 security/selinux/ss/policydb.c pr_err("SELinux: mls: truncated level\n"); pr_err 1498 security/selinux/ss/policydb.c pr_err("SELinux: mls: error reading level categories\n"); pr_err 1652 security/selinux/ss/policydb.c pr_err("SELinux: user %s: " pr_err 1663 security/selinux/ss/policydb.c pr_err("SELinux: boundary violated policy: " pr_err 1688 security/selinux/ss/policydb.c pr_err("SELinux: role %s: " pr_err 1699 security/selinux/ss/policydb.c pr_err("SELinux: boundary violated policy: " pr_err 1721 security/selinux/ss/policydb.c pr_err("SELinux: type %s: " pr_err 1731 security/selinux/ss/policydb.c pr_err("SELinux: type %s: " pr_err 1989 security/selinux/ss/policydb.c pr_err("SELinux: dup genfs fstype %s\n", pr_err 2039 security/selinux/ss/policydb.c pr_err("SELinux: dup genfs entry (%s,%s)\n", pr_err 2276 security/selinux/ss/policydb.c pr_err("SELinux: policydb magic number 0x%x does " pr_err 2285 security/selinux/ss/policydb.c pr_err("SELinux: policydb string length %d does not " pr_err 2294 security/selinux/ss/policydb.c pr_err("SELinux: unable to allocate memory for policydb " pr_err 2301 security/selinux/ss/policydb.c pr_err("SELinux: truncated policydb string identifier\n"); pr_err 2309 security/selinux/ss/policydb.c pr_err("SELinux: policydb string %s does not match " pr_err 2327 security/selinux/ss/policydb.c pr_err("SELinux: policydb version %d does not match " pr_err 2338 security/selinux/ss/policydb.c pr_err("SELinux: security policydb version %d " pr_err 2362 security/selinux/ss/policydb.c pr_err("SELinux: unable to find policy compat info " pr_err 2370 security/selinux/ss/policydb.c pr_err("SELinux: policydb table sizes (%d,%d) do " pr_err 3399 security/selinux/ss/policydb.c pr_err("SELinux: refusing to write policy version %d." pr_err 3428 security/selinux/ss/policydb.c pr_err("SELinux: compatibility lookup failed for policy " pr_err 784 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 792 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 800 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 874 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %u\n", pr_err 882 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %u\n", pr_err 1030 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1037 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1115 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1126 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1169 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1180 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1297 security/selinux/ss/services.c pr_err("SELinux: %s: called before initial " pr_err 1310 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1687 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1694 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 1965 security/selinux/ss/services.c pr_err("SELinux: Unable to map context %s, rc = %d.\n", pr_err 2020 security/selinux/ss/services.c pr_err("SELinux: unable to look up" pr_err 2163 security/selinux/ss/services.c pr_err("SELinux: unable to load the initial SIDs\n"); pr_err 2175 security/selinux/ss/services.c pr_err("SELinux: unable to preserve booleans\n"); pr_err 2195 security/selinux/ss/services.c pr_err("SELinux: unable to convert the internal" pr_err 2988 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 2996 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 3099 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 3106 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized SID %d\n", pr_err 3197 security/selinux/ss/services.c pr_err("SELinux: %s: unrecognized class %s\n", pr_err 2791 security/tomoyo/common.c pr_err("Profile version %u is not supported.\n", pr_err 2794 security/tomoyo/common.c pr_err("Profile %u (used by '%s') is not defined.\n", pr_err 2798 security/tomoyo/common.c pr_err("Userland tools for TOMOYO 2.6 must be installed and policy must be initialized.\n"); pr_err 2799 security/tomoyo/common.c pr_err("Please see https://tomoyo.osdn.jp/2.6/ for more information.\n"); pr_err 364 sound/arm/pxa2xx-ac97-lib.c pr_err("%s: gpio_request_one() failed: %d\n", pr_err 100 sound/core/compress_offload.c pr_err("no device data!!!\n"); pr_err 105 sound/core/compress_offload.c pr_err("this device doesn't support this direction\n"); pr_err 1002 sound/core/compress_offload.c pr_err("snd_register_device failed %d\n", ret); pr_err 1140 sound/core/compress_offload.c pr_err("failed with %d\n", ret); pr_err 92 sound/core/isadma.c pr_err("ALSA: pointer (0x%x) for DMA #%ld is greater than transfer size (0x%x)\n", result, dma, size); pr_err 159 sound/core/memalloc.c pr_err("snd-malloc: invalid device type %d\n", type); pr_err 236 sound/core/memalloc.c pr_err("snd-malloc: invalid device type %d\n", dmab->dev.type); pr_err 1183 sound/core/oss/mixer_oss.c pr_err("ALSA: mixer_oss: invalid OSS volume '%s'\n", pr_err 1198 sound/core/oss/mixer_oss.c pr_err("ALSA: mixer_oss: invalid index %d\n", idx); pr_err 3165 sound/core/oss/pcm_oss.c pr_err("ALSA: pcm_oss: invalid dsp_map[%d] = %d\n", pr_err 3170 sound/core/oss/pcm_oss.c pr_err("ALSA: pcm_oss: invalid adsp_map[%d] = %d\n", pr_err 1833 sound/core/rawmidi.c pr_err("ALSA: rawmidi: invalid midi_map[%d] = %d\n", pr_err 1838 sound/core/rawmidi.c pr_err("ALSA: rawmidi: invalid amidi_map[%d] = %d\n", pr_err 223 sound/core/seq/oss/seq_oss.c pr_err("ALSA: seq_oss: can't register device seq\n"); pr_err 230 sound/core/seq/oss/seq_oss.c pr_err("ALSA: seq_oss: can't register device music\n"); pr_err 244 sound/core/seq/oss/seq_oss.c pr_err("ALSA: seq_oss: error unregister device music\n"); pr_err 246 sound/core/seq/oss/seq_oss.c pr_err("ALSA: seq_oss: error unregister device seq\n"); pr_err 210 sound/core/seq/oss/seq_oss_init.c pr_err("ALSA: seq_oss: can't create port\n"); pr_err 251 sound/core/seq/oss/seq_oss_init.c pr_err("ALSA: seq_oss: can't alloc timer\n"); pr_err 378 sound/core/seq/oss/seq_oss_init.c pr_err("ALSA: seq_oss: unable to delete queue %d (%d)\n", queue, rc); pr_err 180 sound/core/seq/oss/seq_oss_midi.c pr_err("ALSA: seq_oss: can't malloc midi coder\n"); pr_err 121 sound/core/seq/oss/seq_oss_synth.c pr_err("ALSA: seq_oss: no more synth slot\n"); pr_err 154 sound/core/seq/oss/seq_oss_synth.c pr_err("ALSA: seq_oss: can't unregister synth\n"); pr_err 307 sound/core/seq/seq_clientmgr.c pr_err("ALSA: seq: Trying to free client %d with undefined type = %d\n", pr_err 156 sound/core/seq/seq_dummy.c pr_err("ALSA: seq_dummy: invalid number of ports %d\n", ports); pr_err 106 sound/core/seq/seq_midi.c pr_err("ALSA: seq_midi: MIDI output buffer overrun\n"); pr_err 183 sound/core/seq/seq_prioq.c pr_err("ALSA: seq: cannot find a pointer.. infinite loop?\n"); pr_err 289 sound/core/seq/seq_timer.c pr_err("ALSA: seq fatal error: cannot create timer (%i)\n", err); pr_err 437 sound/core/seq/seq_virmidi.c pr_err("ALSA: seq_virmidi: seq_mode is not set: %d\n", rdev->seq_mode); pr_err 391 sound/core/sound.c pr_err("ALSA core: unable to register native major device number %d\n", major); pr_err 2194 sound/core/timer.c pr_err("ALSA: unable to register system timer (%i)\n", err); pr_err 2201 sound/core/timer.c pr_err("ALSA: unable to register timer device (%i)\n", err); pr_err 103 sound/core/vmaster.c pr_err("ALSA: vmaster: invalid slave element\n"); pr_err 431 sound/oss/dmasound/dmasound_q40.c pr_err("Couldn't register sound interrupt\n"); pr_err 317 sound/pci/asihpi/hpioctl.c pr_err("asihpi_isr ASI%04X:%d no handler\n", a->adapter->type, pr_err 536 sound/pci/au88x0/au88x0_core.c pr_err( "Vortex: could not set src-%d from %d to %d\n", pr_err 194 sound/pci/aw2/aw2-saa7146.c pr_err("aw2: snd_aw2_saa7146_pcm_init_playback: " pr_err 240 sound/pci/aw2/aw2-saa7146.c pr_err("aw2: snd_aw2_saa7146_pcm_init_capture: " pr_err 34 sound/pci/ca0106/ca_midi.c pr_err("ca_midi_clear_rx: timeout (status = 0x%x)\n", pr_err 101 sound/pci/ca0106/ca_midi.c pr_err("ca_midi_cmd: 0x%x failed at 0x%x (status = 0x%x, data = 0x%x)!!!\n", pr_err 195 sound/soc/amd/acp-pcm-dma.c pr_err("Failed to clear reset of channel : %d\n", ch_num); pr_err 495 sound/soc/amd/acp-pcm-dma.c pr_err("Failed to stop ACP DMA channel : %d\n", ch_num); pr_err 543 sound/soc/amd/acp-pcm-dma.c pr_err("ACP SRAM bank %d state change failed\n", bank); pr_err 569 sound/soc/amd/acp-pcm-dma.c pr_err("Failed to reset ACP\n"); pr_err 587 sound/soc/amd/acp-pcm-dma.c pr_err("Failed to reset ACP\n"); pr_err 663 sound/soc/amd/acp-pcm-dma.c pr_err("Failed to reset ACP\n"); pr_err 680 sound/soc/amd/acp-pcm-dma.c pr_err("Failed to reset ACP\n"); pr_err 99 sound/soc/amd/raven/acp3x-pcm-dma.c pr_err("ACP3x power state change failure\n"); pr_err 148 sound/soc/amd/raven/acp3x-pcm-dma.c pr_err("ACP3x power on failed\n"); pr_err 154 sound/soc/amd/raven/acp3x-pcm-dma.c pr_err("ACP3x reset failed\n"); pr_err 167 sound/soc/amd/raven/acp3x-pcm-dma.c pr_err("ACP3x reset failed\n"); pr_err 173 sound/soc/amd/raven/acp3x-pcm-dma.c pr_err("ACP3x power off failed\n"); pr_err 91 sound/soc/atmel/atmel-pcm-dma.c pr_err("atmel-pcm: hwparams to dma slave configure failed\n"); pr_err 901 sound/soc/atmel/atmel_ssc_dai.c pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n", pr_err 36 sound/soc/atmel/atmel_wm8904.c pr_err("%s - failed to set wm8904 codec PLL.", __func__); pr_err 48 sound/soc/atmel/atmel_wm8904.c pr_err("%s -failed to set wm8904 SYSCLK\n", __func__); pr_err 2475 sound/soc/codecs/ab8500-codec.c pr_err("%s: Failed to setup mics (%d)!\n", __func__, status); pr_err 2480 sound/soc/codecs/ab8500-codec.c pr_err("%s: Failed to set earpiece CM-voltage (%d)!\n", pr_err 263 sound/soc/codecs/cs35l34.c pr_err("Invalid event = 0x%x\n", event); pr_err 360 sound/soc/codecs/cs35l34.c pr_err("Invalid event = 0x%x\n", event); pr_err 391 sound/soc/codecs/cs35l34.c pr_err("%s regmap read failure %d\n", __func__, ret); pr_err 403 sound/soc/codecs/cs35l34.c pr_err("%s regmap read failure %d\n", pr_err 413 sound/soc/codecs/cs35l34.c pr_err("%s Device did not power down properly\n", pr_err 417 sound/soc/codecs/cs35l34.c pr_err("Invalid event = 0x%x\n", event); pr_err 1223 sound/soc/codecs/cs35l34.c pr_err("Failed to register CS35l34 I2C driver: %d\n", ret); pr_err 491 sound/soc/codecs/cs42l73.c pr_err("Invalid event = 0x%x\n", event); pr_err 508 sound/soc/codecs/cs42l73.c pr_err("Invalid event = 0x%x\n", event); pr_err 526 sound/soc/codecs/cs42l73.c pr_err("Invalid event = 0x%x\n", event); pr_err 216 sound/soc/codecs/da732x.c pr_err("Wrong charge pump state\n"); pr_err 451 sound/soc/codecs/max98925.c pr_err("%s: format unsupported %d", pr_err 1103 sound/soc/codecs/rt1305.c pr_err("R0 calibration failed\n"); pr_err 4705 sound/soc/codecs/rt5665.c pr_err("HP Calibration Failure\n"); pr_err 4724 sound/soc/codecs/rt5665.c pr_err("MONO Calibration Failure\n"); pr_err 1134 sound/soc/codecs/rt5668.c pr_err("sysclk rate %d is too low\n", pr_err 1144 sound/soc/codecs/rt5668.c pr_err("can't find div for sysclk %d\n", pr_err 1151 sound/soc/codecs/rt5668.c pr_err("sysclk rate %d is too high\n", pr_err 2444 sound/soc/codecs/rt5668.c pr_err("HP Calibration Failure\n"); pr_err 2514 sound/soc/codecs/rt5668.c pr_err("Device with ID register %x is not rt5668\n", val); pr_err 1160 sound/soc/codecs/rt5682.c pr_err("sysclk rate %d is too low\n", pr_err 1170 sound/soc/codecs/rt5682.c pr_err("can't find div for sysclk %d\n", pr_err 1177 sound/soc/codecs/rt5682.c pr_err("sysclk rate %d is too high\n", pr_err 2515 sound/soc/codecs/rt5682.c pr_err("HP Calibration Failure\n"); pr_err 2592 sound/soc/codecs/rt5682.c pr_err("Device with ID register %x is not rt5682\n", val); pr_err 302 sound/soc/codecs/wl1273.c pr_err("Cannot play in RX mode.\n"); pr_err 308 sound/soc/codecs/wl1273.c pr_err("Cannot capture in TX mode.\n"); pr_err 339 sound/soc/codecs/wl1273.c pr_err("Rate %d not supported.\n", params_rate(params)); pr_err 344 sound/soc/codecs/wl1273.c pr_err("Only mono supported.\n"); pr_err 353 sound/soc/codecs/wl1273.c pr_err("Only playback supported with TX.\n"); pr_err 359 sound/soc/codecs/wl1273.c pr_err("Only capture supported with RX.\n"); pr_err 365 sound/soc/codecs/wl1273.c pr_err("Unexpected mode: %d.\n", wl1273->mode); pr_err 1873 sound/soc/codecs/wm2200.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 1889 sound/soc/codecs/wm2200.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 1908 sound/soc/codecs/wm2200.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 1693 sound/soc/codecs/wm5100.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 1709 sound/soc/codecs/wm5100.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 1728 sound/soc/codecs/wm5100.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 682 sound/soc/codecs/wm8741.c pr_err("Failed to register WM8741 I2C driver: %d\n", ret); pr_err 367 sound/soc/codecs/wm8804.c pr_err("%s: Unable to scale output frequency: %uHz\n", pr_err 381 sound/soc/codecs/wm8804.c pr_err("%s: WM8804 N value is not within the recommended range: %lu\n", pr_err 1621 sound/soc/codecs/wm8904.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 1637 sound/soc/codecs/wm8904.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 1656 sound/soc/codecs/wm8904.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 1157 sound/soc/codecs/wm8960.c pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv); pr_err 2748 sound/soc/codecs/wm8962.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 2764 sound/soc/codecs/wm8962.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 2783 sound/soc/codecs/wm8962.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 398 sound/soc/codecs/wm8993.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 416 sound/soc/codecs/wm8993.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 434 sound/soc/codecs/wm8993.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 1930 sound/soc/codecs/wm8996.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 1956 sound/soc/codecs/wm8996.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 1975 sound/soc/codecs/wm8996.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 476 sound/soc/codecs/wm9081.c pr_err("Can't scale %dMHz input down to <=13.5MHz\n", pr_err 495 sound/soc/codecs/wm9081.c pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", pr_err 513 sound/soc/codecs/wm9081.c pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); pr_err 74 sound/soc/fsl/efika-audio-fabric.c pr_err("efika_fabric_init: platform_device_alloc() failed\n"); pr_err 82 sound/soc/fsl/efika-audio-fabric.c pr_err("efika_fabric_init: platform_device_add() failed\n"); pr_err 1177 sound/soc/fsl/fsl_ssi.c pr_err("ac97 write clk_prepare_enable failed: %d\n", pr_err 1211 sound/soc/fsl/fsl_ssi.c pr_err("ac97 read clk_prepare_enable failed: %d\n", ret); pr_err 41 sound/soc/fsl/mpc5200_psc_ac97.c pr_err("timeout on ac97 bus (rdy)\n"); pr_err 56 sound/soc/fsl/mpc5200_psc_ac97.c pr_err("timeout on ac97 read (val) %x\n", pr_err 64 sound/soc/fsl/mpc5200_psc_ac97.c pr_err("reg echo error on ac97 read\n"); pr_err 85 sound/soc/fsl/mpc5200_psc_ac97.c pr_err("timeout on ac97 bus (write)\n"); pr_err 172 sound/soc/fsl/mpc5200_psc_i2s.c pr_err("Failed to register DAI\n"); pr_err 428 sound/soc/fsl/mpc8610_hpcd.c pr_err("mpc8610-hpcd: missing/invalid global utilities node\n"); pr_err 47 sound/soc/fsl/mx27vis-aic32x4.c pr_err("%s: failed setting codec sysclk\n", __func__); pr_err 54 sound/soc/fsl/mx27vis-aic32x4.c pr_err("can't set CPU system clock IMX_SSP_SYS_CLK\n"); pr_err 436 sound/soc/fsl/p1022_ds.c pr_err("snd-soc-p1022ds: missing/invalid global utils node\n"); pr_err 385 sound/soc/fsl/p1022_rdk.c pr_err("snd-soc-p1022rdk: missing/invalid global utils node\n"); pr_err 57 sound/soc/intel/atom/sst-mfld-platform-compress.c pr_err("no device available to run\n"); pr_err 134 sound/soc/intel/atom/sst-mfld-platform-compress.c pr_err("Undefined format%d\n", params->codec.format); pr_err 143 sound/soc/intel/atom/sst-mfld-platform-compress.c pr_err("codec not supported, id =%d\n", params->codec.id); pr_err 161 sound/soc/intel/atom/sst-mfld-platform-compress.c pr_err("stream allocation failed %d\n", retval); pr_err 342 sound/soc/intel/skylake/skl-sst-utils.c pr_err("%s: Firmware file small, no hdr\n", __func__); pr_err 62 sound/soc/meson/axg-tdm-formatter.c pr_err("channel mask error\n"); pr_err 155 sound/soc/meson/axg-tdm-formatter.c pr_err("failed to enable formatter\n"); pr_err 353 sound/soc/meson/axg-tdm-formatter.c pr_err("failed to start tdm stream\n"); pr_err 129 sound/soc/meson/axg-tdmin.c pr_err("Unsupported format: %u\n", pr_err 127 sound/soc/meson/axg-tdmout.c pr_err("Unsupported format: %u\n", pr_err 163 sound/soc/meson/axg-tdmout.c pr_err("Unsupported physical width: %u\n", pr_err 43 sound/soc/qcom/apq8096.c pr_err("failed to get codec chan map, err:%d\n", ret); pr_err 56 sound/soc/qcom/apq8096.c pr_err("Failed to set cpu chan map, err:%d\n", ret); pr_err 484 sound/soc/qcom/lpass-platform.c pr_err("error reading from irqstat reg: %d\n", rv); pr_err 97 sound/soc/qcom/qdsp6/q6afe-dai.c pr_err("%s: format %d\n", pr_err 390 sound/soc/qcom/qdsp6/q6afe-dai.c pr_err("%s: tx slot not found\n", __func__); pr_err 402 sound/soc/qcom/qdsp6/q6afe-dai.c pr_err("%s: rx slot not found\n", __func__); pr_err 223 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("%s: private data null or audio client freed\n", pr_err 246 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("Audio Start: Buffer Allocation failed rc = %d\n", pr_err 260 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("%s: q6asm_open_write failed\n", __func__); pr_err 270 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("%s: stream reg failed ret:%d\n", __func__, ret); pr_err 341 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("Drv data not found ..\n"); pr_err 382 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("constraint for buffer bytes min max ret = %d\n", pr_err 390 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("constraint for period bytes step ret = %d\n", pr_err 396 sound/soc/qcom/qdsp6/q6asm-dai.c pr_err("constraint for buffer bytes step ret = %d\n", pr_err 1127 sound/soc/qcom/qdsp6/q6asm.c pr_err("read op[0x%x]rc[%d]\n", pkt->hdr.opcode, rc); pr_err 1168 sound/soc/qcom/qdsp6/q6asm.c pr_err("Invalid format[%d]\n", format); pr_err 318 sound/soc/qcom/qdsp6/q6routing.c pr_err("Routing driver not yet ready\n"); pr_err 155 sound/soc/qcom/sdm845.c pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id); pr_err 299 sound/soc/qcom/sdm845.c pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id); pr_err 343 sound/soc/qcom/sdm845.c pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id); pr_err 79 sound/soc/samsung/bells.c pr_err("Failed to start FLL: %d\n", ret); pr_err 87 sound/soc/samsung/bells.c pr_err("Failed to start FLL: %d\n", ret); pr_err 119 sound/soc/samsung/bells.c pr_err("Failed to stop FLL: %d\n", ret); pr_err 127 sound/soc/samsung/bells.c pr_err("Failed to stop FLL: %d\n", ret); pr_err 295 sound/soc/samsung/idma.c pr_err("fail to claim i2s irq , ret = %d\n", ret); pr_err 315 sound/soc/samsung/idma.c pr_err("idma_close called with prtd == NULL\n"); pr_err 42 sound/soc/samsung/littlemill.c pr_err("Failed to start FLL: %d\n", ret); pr_err 51 sound/soc/samsung/littlemill.c pr_err("Failed to set SYSCLK: %d\n", ret); pr_err 83 sound/soc/samsung/littlemill.c pr_err("Failed to switch away from FLL1: %d\n", ret); pr_err 90 sound/soc/samsung/littlemill.c pr_err("Failed to stop FLL1: %d\n", ret); pr_err 117 sound/soc/samsung/littlemill.c pr_err("Failed to start FLL: %d\n", ret); pr_err 126 sound/soc/samsung/littlemill.c pr_err("Failed to set SYSCLK: %d\n", ret); pr_err 192 sound/soc/samsung/littlemill.c pr_err("Failed to start FLL: %d\n", ret); pr_err 200 sound/soc/samsung/littlemill.c pr_err("Failed to set SYSCLK: %d\n", ret); pr_err 208 sound/soc/samsung/littlemill.c pr_err("Failed to switch away from FLL2: %d\n", ret); pr_err 215 sound/soc/samsung/littlemill.c pr_err("Failed to stop FLL2: %d\n", ret); pr_err 42 sound/soc/samsung/lowland.c pr_err("Failed to set SYSCLK clock source: %d\n", ret); pr_err 50 sound/soc/samsung/lowland.c pr_err("Failed to set OPCLK rate: %d\n", ret); pr_err 265 sound/soc/samsung/s3c-i2s-v2.c pr_err("unknown master/slave format\n"); pr_err 285 sound/soc/samsung/s3c-i2s-v2.c pr_err("Unknown data format\n"); pr_err 61 sound/soc/samsung/s3c2412-i2s.c pr_err("failed to get i2sclk clock\n"); pr_err 176 sound/soc/samsung/s3c2412-i2s.c pr_err("failed to register the DMA: %d\n", ret); pr_err 184 sound/soc/samsung/s3c2412-i2s.c pr_err("failed to register the dai\n"); pr_err 344 sound/soc/samsung/s3c24xx-i2s.c pr_err("failed to get iis_clock\n"); pr_err 170 sound/soc/samsung/s3c24xx_simtec.c pr_err( "%s: failed setting codec sysclk\n", __func__); pr_err 179 sound/soc/samsung/s3c24xx_simtec.c pr_err("%s: failed to set MPLLin as clksrc\n", pr_err 43 sound/soc/samsung/speyside.c pr_err("Failed to stop FLL\n"); pr_err 76 sound/soc/samsung/speyside.c pr_err("Failed to start FLL\n"); pr_err 156 sound/soc/samsung/speyside.c pr_err("Failed to request HP_SEL GPIO: %d\n", ret); pr_err 38 sound/soc/samsung/tobermory.c pr_err("Failed to start FLL: %d\n", ret); pr_err 45 sound/soc/samsung/tobermory.c pr_err("Failed to set SYSCLK: %d\n", ret); pr_err 79 sound/soc/samsung/tobermory.c pr_err("Failed to switch away from FLL: %d\n", ret); pr_err 86 sound/soc/samsung/tobermory.c pr_err("Failed to stop FLL: %d\n", ret); pr_err 185 sound/soc/soc-compress.c pr_err("Compress ASoC: %s startup failed: %d\n", pr_err 2954 sound/soc/soc-core.c pr_err("card->dev is not set before calling %s\n", __func__); pr_err 541 sound/soc/soc-pcm.c pr_err("ASoC: %s startup failed: %d\n", pr_err 267 sound/soc/tegra/tegra20_spdif.c pr_err("Can't retrieve spdif clock\n"); pr_err 1911 sound/soc/ti/davinci-mcasp.c pr_err("%s: Only one serializer allowed!\n", pr_err 1934 sound/soc/ti/davinci-mcasp.c pr_err("%s: Only one serializer allowed!\n", pr_err 335 sound/soc/ti/omap-abe-twl6040.c pr_err("%s: dmic-codec device registration failed\n", __func__); pr_err 341 sound/soc/ti/omap-abe-twl6040.c pr_err("%s: platform driver registration failed\n", __func__); pr_err 43 sound/soc/ti/omap3pandora.c pr_err(PREFIX "can't set codec system clock\n"); pr_err 52 sound/soc/ti/omap3pandora.c pr_err(PREFIX "can't set cpu system clock\n"); pr_err 58 sound/soc/ti/omap3pandora.c pr_err(PREFIX "can't set SRG clock divider\n"); pr_err 234 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to get DAC power GPIO\n"); pr_err 240 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to set DAC power GPIO direction\n"); pr_err 246 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to get amp power GPIO\n"); pr_err 252 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to set amp power GPIO direction\n"); pr_err 258 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Platform device allocation failed\n"); pr_err 267 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Unable to add platform device\n"); pr_err 273 sound/soc/ti/omap3pandora.c pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n", pr_err 406 sound/soc/ux500/mop500_ab8500.c pr_err("%s: Failed to add machine-controls (%d)!\n", pr_err 459 sound/usb/stream.c pr_err("%s: channel number mismatch\n", __func__); pr_err 346 sound/xen/xen_snd_front.c pr_err("Backend state is %s while removing driver\n", pr_err 377 sound/xen/xen_snd_front.c pr_err(XENSND_DRIVER_NAME ": different kernel and Xen page sizes are not supported: XEN_PAGE_SIZE (%lu) != PAGE_SIZE (%lu)\n", pr_err 53 tools/include/linux/lockdep.h #define pr_warn pr_err pr_err 54 tools/include/linux/lockdep.h #define pr_cont pr_err pr_err 18 tools/perf/arch/arm/tests/vectors-page.c pr_err("%s not found, is CONFIG_KUSER_HELPERS enabled?\n", pr_err 27 tools/perf/arch/arm/util/auxtrace.c pr_err("spes alloc failed\n"); pr_err 35 tools/perf/arch/arm/util/auxtrace.c pr_err("sprintf failed\n"); pr_err 89 tools/perf/arch/arm/util/auxtrace.c pr_err("Concurrent ARM Coresight ETM and SPE operation not currently supported\n"); pr_err 83 tools/perf/arch/arm/util/cs-etm.c pr_err("%s: can't read file %s\n", pr_err 132 tools/perf/arch/arm/util/cs-etm.c pr_err("%s: can't read file %s\n", pr_err 234 tools/perf/arch/arm/util/cs-etm.c pr_err("failed to set sink \"%s\" on event %s with %d (%s)\n", pr_err 273 tools/perf/arch/arm/util/cs-etm.c pr_err("There may be only one %s event\n", pr_err 293 tools/perf/arch/arm/util/cs-etm.c pr_err("Cannot use clockid (-k option) with %s\n", pr_err 343 tools/perf/arch/arm/util/cs-etm.c pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n", pr_err 352 tools/perf/arch/arm/util/cs-etm.c pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n"); pr_err 377 tools/perf/arch/arm/util/cs-etm.c pr_err("auxtrace too big, truncating to %d\n", pr_err 382 tools/perf/arch/arm/util/cs-etm.c pr_err("Invalid mmap size for %s: must be a power of 2\n", pr_err 564 tools/perf/arch/arm/util/cs-etm.c pr_err("%s: error reading: %s\n", __func__, pmu_path); pr_err 45 tools/perf/arch/arm/util/unwind-libunwind.c pr_err("unwind: invalid reg id %d\n", regnum); pr_err 80 tools/perf/arch/arm64/util/arm-spe.c pr_err("There may be only one " ARM_SPE_PMU_NAME "x event\n"); pr_err 110 tools/perf/arch/arm64/util/arm-spe.c pr_err("Invalid mmap size for ARM SPE: must be at least %zuKiB and a power of 2\n", pr_err 214 tools/perf/arch/arm64/util/arm-spe.c pr_err("arm_spe default config cannot allocate a perf_event_attr\n"); pr_err 61 tools/perf/arch/arm64/util/header.c pr_err("failed to get cpuid string for PMU %s\n", pmu->name); pr_err 81 tools/perf/arch/arm64/util/unwind-libunwind.c pr_err("unwind: invalid reg id %d\n", regnum); pr_err 119 tools/perf/arch/powerpc/util/kvm-stat.c pr_err("%s : %s\n", str, err.str); pr_err 88 tools/perf/arch/powerpc/util/unwind-libunwind.c pr_err("unwind: invalid reg id %d\n", regnum); pr_err 119 tools/perf/arch/x86/tests/rdpmc.c pr_err("Error: sys_perf_event_open() syscall returned " pr_err 127 tools/perf/arch/x86/tests/rdpmc.c pr_err("Error: mmap() syscall returned with (%s)\n", pr_err 39 tools/perf/arch/x86/util/auxtrace.c pr_err("intel_pt and intel_bts may not be used together\n"); pr_err 122 tools/perf/arch/x86/util/intel-bts.c pr_err("There may be only one " INTEL_BTS_PMU_NAME " event\n"); pr_err 133 tools/perf/arch/x86/util/intel-bts.c pr_err("Snapshot mode (-S option) requires " INTEL_BTS_PMU_NAME " PMU event (-e " INTEL_BTS_PMU_NAME ")\n"); pr_err 141 tools/perf/arch/x86/util/intel-bts.c pr_err(INTEL_BTS_PMU_NAME " does not support per-cpu recording\n"); pr_err 170 tools/perf/arch/x86/util/intel-bts.c pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n", pr_err 176 tools/perf/arch/x86/util/intel-bts.c pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n"); pr_err 205 tools/perf/arch/x86/util/intel-bts.c pr_err("Invalid mmap size for Intel BTS: must be at least %zuKiB and a power of 2\n", pr_err 407 tools/perf/arch/x86/util/intel-bts.c pr_err("%s: failed, error %d\n", __func__, err); pr_err 513 tools/perf/arch/x86/util/intel-pt.c pr_err("Invalid %s for %s. Valid values are: %s\n", pr_err 567 tools/perf/arch/x86/util/intel-pt.c pr_err(INTEL_PT_PMU_NAME " supports at most one event with aux-output\n"); pr_err 594 tools/perf/arch/x86/util/intel-pt.c pr_err("There may be only one " INTEL_PT_PMU_NAME " event\n"); pr_err 605 tools/perf/arch/x86/util/intel-pt.c pr_err("Snapshot mode (-S option) requires " INTEL_PT_PMU_NAME " PMU event (-e " INTEL_PT_PMU_NAME ")\n"); pr_err 610 tools/perf/arch/x86/util/intel-pt.c pr_err("Cannot use clockid (-k option) with " INTEL_PT_PMU_NAME "\n"); pr_err 651 tools/perf/arch/x86/util/intel-pt.c pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n", pr_err 657 tools/perf/arch/x86/util/intel-pt.c pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n"); pr_err 691 tools/perf/arch/x86/util/intel-pt.c pr_err("Invalid mmap size for Intel Processor Trace: must be at least %zuKiB and a power of 2\n", pr_err 1086 tools/perf/arch/x86/util/intel-pt.c pr_err("%s: failed, error %d\n", __func__, err); pr_err 69 tools/perf/arch/x86/util/unwind-libunwind.c pr_err("unwind: invalid reg id %d\n", regnum); pr_err 109 tools/perf/arch/x86/util/unwind-libunwind.c pr_err("unwind: invalid reg id %d\n", regnum); pr_err 17 tools/perf/bench/futex-wake-parallel.c pr_err("%s: pthread_barrier_t unavailable, disabling this test...\n", __func__); pr_err 578 tools/perf/builtin-annotate.c pr_err("--show-nr-samples is not available in --gtk mode at this time\n"); pr_err 1825 tools/perf/builtin-c2c.c pr_err("Invalid --fields key: `%s'", tok); \ pr_err 1828 tools/perf/builtin-c2c.c pr_err("Unknown --fields key: `%s'", tok); \ pr_err 2620 tools/perf/builtin-c2c.c pr_err("failed: unknown display type: %s\n", str); pr_err 2658 tools/perf/builtin-c2c.c pr_err("unrecognized sort token: %s\n", tok); pr_err 2799 tools/perf/builtin-c2c.c pr_err("Failed setup nodes\n"); pr_err 2829 tools/perf/builtin-c2c.c pr_err("failed to process sample\n"); pr_err 2860 tools/perf/builtin-c2c.c pr_err("failed to setup UI\n"); pr_err 2911 tools/perf/builtin-c2c.c pr_err("failed: memory events not supported\n"); pr_err 2942 tools/perf/builtin-c2c.c pr_err("failed: event '%s' not supported\n", pr_err 130 tools/perf/builtin-config.c pr_err("The config variable does not contain a section name: %s\n", arg); pr_err 134 tools/perf/builtin-config.c pr_err("The config variable does not contain a variable name: %s\n", arg); pr_err 142 tools/perf/builtin-config.c pr_err("The config variable does not contain a value: %s\n", arg); pr_err 148 tools/perf/builtin-config.c pr_err("invalid config variable: %s\n", arg); pr_err 168 tools/perf/builtin-config.c pr_err("Error: only one config file at a time\n"); pr_err 195 tools/perf/builtin-config.c pr_err("Error: takes no arguments\n"); pr_err 200 tools/perf/builtin-config.c pr_err("Nothing configured, " pr_err 215 tools/perf/builtin-config.c pr_err("%s: strdup failed\n", __func__); pr_err 226 tools/perf/builtin-config.c pr_err("%s is not configured: %s\n", pr_err 234 tools/perf/builtin-config.c pr_err("Failed to add '%s=%s'\n", pr_err 248 tools/perf/builtin-config.c pr_err("Failed to set the configs on %s\n", pr_err 75 tools/perf/builtin-data.c pr_err("No conversion support compiled in. perf should be compiled with environment variables LIBBABELTRACE=1 and LIBBABELTRACE_DIR=/path/to/libbabeltrace/\n"); pr_err 90 tools/perf/builtin-data.c pr_err("The libbabeltrace support is not compiled in.\n"); pr_err 126 tools/perf/builtin-data.c pr_err("Unknown command: %s\n", cmdstr); pr_err 201 tools/perf/builtin-diff.c pr_err("Failed: wrong weight data, use 'wdiff:w1,w2'\n"); pr_err 212 tools/perf/builtin-diff.c pr_err("Failed: extra option specified '%s'", opt); pr_err 257 tools/perf/builtin-diff.c pr_err("Failed: '%s' is not computation method " pr_err 1098 tools/perf/builtin-diff.c pr_err("Invalid time string\n"); pr_err 1105 tools/perf/builtin-diff.c pr_err("Invalid time string\n"); pr_err 1158 tools/perf/builtin-diff.c pr_err("Failed to open %s\n", d->data.path); pr_err 1191 tools/perf/builtin-diff.c pr_err("Failed to open %s\n", d->data.path); pr_err 1210 tools/perf/builtin-diff.c pr_err("Failed to process %s\n", d->data.path); pr_err 1730 tools/perf/builtin-diff.c pr_err("Memory allocation failed\n"); pr_err 1790 tools/perf/builtin-diff.c pr_err("Order option out of limit.\n"); pr_err 1831 tools/perf/builtin-diff.c pr_err("Invalid compute method: %s\n", value); pr_err 266 tools/perf/builtin-ftrace.c pr_err("invalid graph depth: %d\n", ftrace->graph_depth); pr_err 288 tools/perf/builtin-ftrace.c pr_err("ftrace only works for %s!\n", pr_err 304 tools/perf/builtin-ftrace.c pr_err("failed to reset ftrace\n"); pr_err 319 tools/perf/builtin-ftrace.c pr_err("failed to set ftrace pid\n"); pr_err 324 tools/perf/builtin-ftrace.c pr_err("failed to set tracing cpumask\n"); pr_err 329 tools/perf/builtin-ftrace.c pr_err("failed to set tracing filters\n"); pr_err 334 tools/perf/builtin-ftrace.c pr_err("failed to set graph depth\n"); pr_err 339 tools/perf/builtin-ftrace.c pr_err("failed to set current_tracer to %s\n", ftrace->tracer); pr_err 347 tools/perf/builtin-ftrace.c pr_err("failed to open trace_pipe\n"); pr_err 356 tools/perf/builtin-ftrace.c pr_err("failed to open trace_pipe\n"); pr_err 364 tools/perf/builtin-ftrace.c pr_err("can't enable tracing\n"); pr_err 418 tools/perf/builtin-ftrace.c pr_err("Please select \"function_graph\" (default) or \"function\"\n"); pr_err 503 tools/perf/builtin-ftrace.c pr_err("%s\n", errbuf); pr_err 55 tools/perf/builtin-help.c pr_err("unrecognized help format '%s'", format); pr_err 255 tools/perf/builtin-help.c pr_err("Config with no key for man viewer: %s", name); pr_err 341 tools/perf/builtin-help.c pr_err("Unable to setup man path"); pr_err 375 tools/perf/builtin-help.c pr_err("no man viewer handled the request"); pr_err 395 tools/perf/builtin-help.c pr_err("'%s': not a documentation directory.", html_path); pr_err 182 tools/perf/builtin-inject.c pr_err("AUX area tracing not supported\n"); pr_err 419 tools/perf/builtin-inject.c pr_err("Can't synthesize build_id event for %s\n", dso->long_name); pr_err 437 tools/perf/builtin-inject.c pr_err("problem processing %d event, skipping it.\n", pr_err 553 tools/perf/builtin-inject.c pr_err("Samples for %s event do not have %s attribute set.", pr_err 826 tools/perf/builtin-inject.c pr_err("--strip option requires --itrace option\n"); pr_err 25 tools/perf/builtin-kallsyms.c pr_err("Couldn't read /proc/kallsyms\n"); pr_err 111 tools/perf/builtin-kmem.c pr_err("%s: malloc failed\n", __func__); pr_err 156 tools/perf/builtin-kmem.c pr_err("%s: malloc failed\n", __func__); pr_err 349 tools/perf/builtin-kmem.c pr_err("Invalid regex: %s\n%s", pattern, err); pr_err 355 tools/perf/builtin-kmem.c pr_err("cannot load kernel map\n"); pr_err 1389 tools/perf/builtin-kmem.c pr_err("Initializing perf session tracepoint handlers failed\n"); pr_err 1404 tools/perf/builtin-kmem.c pr_err("error during process events: %d\n", err); pr_err 1676 tools/perf/builtin-kmem.c pr_err("%s: memdup failed\n", __func__); pr_err 1696 tools/perf/builtin-kmem.c pr_err("%s: memdup failed\n", __func__); pr_err 1714 tools/perf/builtin-kmem.c pr_err("%s: strdup failed\n", __func__); pr_err 1723 tools/perf/builtin-kmem.c pr_err("Unknown slab --sort key: '%s'", tok); pr_err 1740 tools/perf/builtin-kmem.c pr_err("%s: strdup failed\n", __func__); pr_err 1749 tools/perf/builtin-kmem.c pr_err("Unknown page --sort key: '%s'", tok); pr_err 1890 tools/perf/builtin-kmem.c pr_err("invalid default value ('slab' or 'page' required): %s\n", pr_err 1969 tools/perf/builtin-kmem.c pr_err(errmsg, "slab", "slab"); pr_err 1980 tools/perf/builtin-kmem.c pr_err(errmsg, "page", "page"); pr_err 1991 tools/perf/builtin-kmem.c pr_err("Invalid time string\n"); pr_err 112 tools/perf/builtin-kvm.c pr_err("unknown kvm exit code:%lld on %s\n", pr_err 201 tools/perf/builtin-kvm.c pr_err("Not enough memory\n"); pr_err 216 tools/perf/builtin-kvm.c pr_err("Not enough memory\n"); pr_err 414 tools/perf/builtin-kvm.c pr_err("%s: Not enough memory\n", __func__); pr_err 503 tools/perf/builtin-kvm.c pr_err("Unknown compare key:%s\n", kvm->sort_key); pr_err 714 tools/perf/builtin-kvm.c pr_err("Failed to look up CPU type: %s\n", pr_err 723 tools/perf/builtin-kvm.c pr_err("Failed to look up CPU type\n"); pr_err 729 tools/perf/builtin-kvm.c pr_err("CPU %s is not supported.\n", cpuid); pr_err 737 tools/perf/builtin-kvm.c pr_err("Invalid vcpu:%d.\n", vcpu); pr_err 770 tools/perf/builtin-kvm.c pr_err("Failed to parse sample\n"); pr_err 782 tools/perf/builtin-kvm.c pr_err("Failed to enqueue sample: %d\n", err); pr_err 857 tools/perf/builtin-kvm.c pr_err("timerfd_create failed\n"); pr_err 867 tools/perf/builtin-kvm.c pr_err("timerfd_settime failed: %d\n", errno); pr_err 887 tools/perf/builtin-kvm.c pr_err("Failed to read timer fd: %d\n", errno); pr_err 892 tools/perf/builtin-kvm.c pr_err("Error reading timer fd - invalid size returned\n"); pr_err 918 tools/perf/builtin-kvm.c pr_err("Failed to get current flags for fd %d\n", fd); pr_err 923 tools/perf/builtin-kvm.c pr_err("Failed to set non-block option on fd %d\n", fd); pr_err 1098 tools/perf/builtin-kvm.c pr_err("Initializing perf session failed\n"); pr_err 1129 tools/perf/builtin-kvm.c pr_err("Error parsing process id string\n"); pr_err 1202 tools/perf/builtin-kvm.c pr_err("Unable to setup the kvm tracepoints\n"); pr_err 1314 tools/perf/builtin-kvm.c pr_err("Error parsing %s tracepoint: subsystem delimiter not found\n", pr_err 1323 tools/perf/builtin-kvm.c pr_err("Failed to add %s tracepoint to the list\n", *events_tp); pr_err 1435 tools/perf/builtin-kvm.c pr_err("Unable to setup the kvm tracepoints\n"); pr_err 1630 tools/perf/builtin-kvm.c pr_err("Failed to allocate memory for filename\n"); pr_err 174 tools/perf/builtin-lock.c pr_err("memory allocation failed\n"); pr_err 196 tools/perf/builtin-lock.c pr_err("memory allocation failed\n"); pr_err 277 tools/perf/builtin-lock.c pr_err("Unknown compare key: %s\n", sort_key); pr_err 346 tools/perf/builtin-lock.c pr_err("memory allocation failed\n"); pr_err 375 tools/perf/builtin-lock.c pr_err("memory allocation failed\n"); pr_err 804 tools/perf/builtin-lock.c pr_err("Unknown type of information\n"); pr_err 877 tools/perf/builtin-lock.c pr_err("Initializing perf session failed\n"); pr_err 887 tools/perf/builtin-lock.c pr_err("Initializing perf session tracepoint handlers failed\n"); pr_err 921 tools/perf/builtin-lock.c pr_err("tracepoint %s is not enabled. " pr_err 118 tools/perf/builtin-mem.c pr_err("failed: event '%s' not supported\n", pr_err 436 tools/perf/builtin-mem.c pr_err("failed: memory events not supported\n"); pr_err 60 tools/perf/builtin-probe.c pr_err("Too many probes (> %d) were specified.", MAX_PROBES); pr_err 95 tools/perf/builtin-probe.c pr_err("Filter parse error at %td.\n", err - str + 1); pr_err 96 tools/perf/builtin-probe.c pr_err("Source: \"%s\"\n", str); pr_err 97 tools/perf/builtin-probe.c pr_err(" %*c\n", (int)(err - str + 1), '^'); pr_err 264 tools/perf/builtin-probe.c pr_err(" Error: '--vars' doesn't accept arguments.\n"); pr_err 329 tools/perf/builtin-probe.c pr_err("%s", msg); pr_err 332 tools/perf/builtin-probe.c pr_err("\n"); pr_err 624 tools/perf/builtin-probe.c pr_err(" Error: -v and -q are exclusive.\n"); pr_err 649 tools/perf/builtin-probe.c pr_err(" Error: Don't use --list with --exec.\n"); pr_err 694 tools/perf/builtin-probe.c pr_err(" Error: -x/-m must follow the probe definitions.\n"); pr_err 129 tools/perf/builtin-record.c pr_err("failed to write perf data, error: %m\n"); pr_err 164 tools/perf/builtin-record.c pr_err("failed to queue perf data, error: %m\n"); pr_err 187 tools/perf/builtin-record.c pr_err("failed to write perf data, error: %m\n"); pr_err 248 tools/perf/builtin-record.c pr_err("failed to sync perf data, error: %m\n"); pr_err 717 tools/perf/builtin-record.c pr_err("Permission error mapping pages.\n" pr_err 725 tools/perf/builtin-record.c pr_err("failed to mmap with %d (%s)\n", errno, pr_err 804 tools/perf/builtin-record.c pr_err("failed to set filter \"%s\" on event %s with %d (%s)\n", pr_err 886 tools/perf/builtin-record.c pr_err("Couldn't record guest kernel [%d]'s reference" pr_err 896 tools/perf/builtin-record.c pr_err("Couldn't record guest kernel [%d]'s reference" pr_err 1128 tools/perf/builtin-record.c pr_err("Failed to get current timestamp\n"); pr_err 1240 tools/perf/builtin-record.c pr_err("Couldn't synthesize attrs.\n"); pr_err 1247 tools/perf/builtin-record.c pr_err("Couldn't synthesize features.\n"); pr_err 1263 tools/perf/builtin-record.c pr_err("Couldn't record tracing data.\n"); pr_err 1312 tools/perf/builtin-record.c pr_err("Couldn't synthesize thread map.\n"); pr_err 1319 tools/perf/builtin-record.c pr_err("Couldn't synthesize cpu map.\n"); pr_err 1371 tools/perf/builtin-record.c pr_err("Perf session creation failed.\n"); pr_err 1379 tools/perf/builtin-record.c pr_err("Compression initialization failed.\n"); pr_err 1396 tools/perf/builtin-record.c pr_err("Couldn't run the workload!\n"); pr_err 1422 tools/perf/builtin-record.c pr_err("ERROR: Apply config to BPF failed: %s\n", pr_err 1451 tools/perf/builtin-record.c pr_err("Couldn't generate buildids. " pr_err 1474 tools/perf/builtin-record.c pr_err("Could not set realtime priority.\n"); pr_err 1571 tools/perf/builtin-record.c pr_err("AUX area tracing snapshot failed\n"); pr_err 1604 tools/perf/builtin-record.c pr_err("Failed to switch to new file\n"); pr_err 1652 tools/perf/builtin-record.c pr_err("Workload failed: %s\n", emsg); pr_err 2372 tools/perf/builtin-record.c pr_err("ERROR: Setup BPF stdout failed: %s\n", pr_err 2415 tools/perf/builtin-record.c pr_err("Not enough memory for event selector list\n"); pr_err 221 tools/perf/builtin-report.c pr_err("failed: wrong feature ID: %" PRI_lu64 "\n", pr_err 819 tools/perf/builtin-report.c pr_err("Error: failed to process tasks\n"); pr_err 961 tools/perf/builtin-report.c pr_err("time quantum cannot be 0"); pr_err 982 tools/perf/builtin-report.c pr_err("Cannot parse time quantum `%s'\n", arg); pr_err 995 tools/perf/builtin-report.c pr_err("Invalid --ignore-callees regex: %s\n%s", arg, buf); pr_err 1249 tools/perf/builtin-report.c pr_err("Invalid file: %s\n", symbol_conf.vmlinux_name); pr_err 1254 tools/perf/builtin-report.c pr_err("Invalid file: %s\n", symbol_conf.kallsyms_name); pr_err 1334 tools/perf/builtin-report.c pr_err("branch and mem mode incompatible\n"); pr_err 1346 tools/perf/builtin-report.c pr_err("Error: --hierarchy and --fields options cannot be used together\n"); pr_err 1372 tools/perf/builtin-report.c pr_err("Error: --tasks and --mmaps can't be used together with --stats\n"); pr_err 1469 tools/perf/builtin-report.c pr_err("%s: failed to set libtraceevent function resolver\n", pr_err 590 tools/perf/builtin-sched.c pr_err("Error: sys_perf_event_open() syscall returned " pr_err 856 tools/perf/builtin-sched.c pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta); pr_err 1017 tools/perf/builtin-sched.c pr_err("No memory at %s\n", __func__); pr_err 1041 tools/perf/builtin-sched.c pr_err("Non memory at %s", __func__); pr_err 1125 tools/perf/builtin-sched.c pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta); pr_err 1140 tools/perf/builtin-sched.c pr_err("out-event: Internal tree error"); pr_err 1153 tools/perf/builtin-sched.c pr_err("in-event: Internal tree error"); pr_err 1192 tools/perf/builtin-sched.c pr_err("in-event: Internal tree error"); pr_err 1227 tools/perf/builtin-sched.c pr_err("wakeup-event: Internal tree error"); pr_err 1295 tools/perf/builtin-sched.c pr_err("migration-event: Internal tree error"); pr_err 1560 tools/perf/builtin-sched.c pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta); pr_err 1768 tools/perf/builtin-sched.c pr_err("Internal error: can't find thread\n"); pr_err 1815 tools/perf/builtin-sched.c pr_err("Failed to process events, error %d", err); pr_err 2160 tools/perf/builtin-sched.c pr_err("Failed to resolve callchain. Skipping\n"); pr_err 2302 tools/perf/builtin-sched.c pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu); pr_err 2320 tools/perf/builtin-sched.c pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu); pr_err 2525 tools/perf/builtin-sched.c pr_err("problem processing %d event. skipping it\n", pr_err 2941 tools/perf/builtin-sched.c pr_err("Failed to allocate memory for evsel runtime data\n"); pr_err 3002 tools/perf/builtin-sched.c pr_err("Invalid time string\n"); pr_err 3018 tools/perf/builtin-sched.c pr_err("No sched_switch events found. Have you run 'perf sched record'?\n"); pr_err 3042 tools/perf/builtin-sched.c pr_err("Failed to process events, error %d", err); pr_err 3194 tools/perf/builtin-sched.c pr_err("failed to get cpus map from %s\n", sched->map.cpus_str); pr_err 3211 tools/perf/builtin-sched.c pr_err("failed to get thread map from %s\n", sched->map.color_pids_str); pr_err 3228 tools/perf/builtin-sched.c pr_err("failed to get thread map from %s\n", sched->map.color_cpus_str); pr_err 3525 tools/perf/builtin-sched.c pr_err(" Error: -s and -[n|w] are mutually exclusive.\n"); pr_err 368 tools/perf/builtin-script.c pr_err("Samples for '%s' event do not have %s attribute set. " pr_err 431 tools/perf/builtin-script.c pr_err("Display of symbols requested but neither sample IP nor " pr_err 437 tools/perf/builtin-script.c pr_err("Display of offsets requested but symbol is not" pr_err 443 tools/perf/builtin-script.c pr_err("Display of DSO requested but no address to convert.\n"); pr_err 447 tools/perf/builtin-script.c pr_err("Display of source line number requested but sample IP is not\n" pr_err 454 tools/perf/builtin-script.c pr_err("Display of branch stack assembler requested, but non all-branch filter set\n" pr_err 530 tools/perf/builtin-script.c pr_err("%s events do not exist. " pr_err 2008 tools/perf/builtin-script.c pr_err("Samples misordered, previous: %" PRIu64 pr_err 2018 tools/perf/builtin-script.c pr_err("problem processing %d event, skipping it.\n", pr_err 2511 tools/perf/builtin-script.c pr_err("Couldn't create the per event dump files\n"); pr_err 2521 tools/perf/builtin-script.c pr_err("Misordered timestamps: %" PRIu64 "\n", nr_unordered); pr_err 3223 tools/perf/builtin-script.c pr_err("malloc failed\n"); pr_err 3672 tools/perf/builtin-script.c pr_err("malloc failed\n"); pr_err 3698 tools/perf/builtin-script.c pr_err("malloc failed\n"); pr_err 3736 tools/perf/builtin-script.c pr_err("malloc failed\n"); pr_err 3807 tools/perf/builtin-script.c pr_err("%s: failed to set libtraceevent function resolver\n", __func__); pr_err 220 tools/perf/builtin-stat.c pr_err("failed to write perf data, error: %m\n"); pr_err 306 tools/perf/builtin-stat.c pr_err("failed to write stat event\n"); pr_err 350 tools/perf/builtin-stat.c pr_err("failed to write stat round event\n"); pr_err 526 tools/perf/builtin-stat.c pr_err("failed to set filter \"%s\" on event %s with %d (%s)\n", pr_err 576 tools/perf/builtin-stat.c pr_err("Workload failed: %s\n", emsg); pr_err 1326 tools/perf/builtin-stat.c pr_err("top down event configuration requires --per-core mode\n"); pr_err 1331 tools/perf/builtin-stat.c pr_err("top down event configuration requires system-wide mode (-a)\n"); pr_err 1339 tools/perf/builtin-stat.c pr_err("Out of memory\n"); pr_err 1435 tools/perf/builtin-stat.c pr_err("Cannot use -r option with perf stat record.\n"); pr_err 1441 tools/perf/builtin-stat.c pr_err("Perf session creation failed\n"); pr_err 1814 tools/perf/builtin-stat.c pr_err("Run count must be a positive number\n"); pr_err 1825 tools/perf/builtin-stat.c pr_err("failed to setup -r option"); pr_err 1868 tools/perf/builtin-stat.c pr_err("Problems finding threads of monitor\n"); pr_err 1896 tools/perf/builtin-stat.c pr_err("interval-count option should be used together with " pr_err 1905 tools/perf/builtin-stat.c pr_err("timeout must be >= 10ms.\n"); pr_err 1914 tools/perf/builtin-stat.c pr_err("timeout option is not supported with interval-print.\n"); pr_err 1993 tools/perf/builtin-stat.c pr_err("failed to write stat round event\n"); pr_err 1620 tools/perf/builtin-timechart.c pr_err("Initializing session tracepoint handlers failed\n"); pr_err 1983 tools/perf/builtin-timechart.c pr_err("-P and -T options cannot be used at the same time.\n"); pr_err 1993 tools/perf/builtin-timechart.c pr_err("-P and -T options cannot be used at the same time.\n"); pr_err 128 tools/perf/builtin-top.c pr_err("Can't annotate %s: No vmlinux file was found in the " pr_err 139 tools/perf/builtin-top.c pr_err("Not enough memory for annotating '%s' symbol!\n", pr_err 151 tools/perf/builtin-top.c pr_err("Couldn't annotate %s: %s\n", sym->name, msg); pr_err 224 tools/perf/builtin-top.c pr_err("Not enough memory for annotating '%s' symbol!\n", pr_err 748 tools/perf/builtin-top.c pr_err("Can't find guest [%d]'s kernel information\n", pr_err 756 tools/perf/builtin-top.c pr_err("%u unprocessable samples recorded.\r", pr_err 831 tools/perf/builtin-top.c pr_err("Problem incrementing symbol period, skipping event\n"); pr_err 1103 tools/perf/builtin-top.c pr_err("failed to process events\n"); pr_err 1144 tools/perf/builtin-top.c pr_err("Can't parse sample, err = %d\n", ret); pr_err 1570 tools/perf/builtin-top.c pr_err("Not enough memory for event selector list\n"); pr_err 1584 tools/perf/builtin-top.c pr_err("Error: --hierarchy and --fields options cannot be used together\n"); pr_err 2217 tools/perf/builtin-trace.c pr_err("Problem processing %s callchain, skipping...\n", perf_evsel__name(evsel)); pr_err 2427 tools/perf/builtin-trace.c pr_err("Problem processing %s callchain, skipping...\n", perf_evsel__name(evsel)); pr_err 2515 tools/perf/builtin-trace.c pr_err("Problem processing %s callchain, skipping...\n", perf_evsel__name(evsel)); pr_err 2609 tools/perf/builtin-trace.c pr_err("Neither raw_syscalls nor syscalls events exist.\n"); pr_err 3369 tools/perf/builtin-trace.c pr_err("ERROR: Apply config to BPF failed: %s\n", pr_err 3619 tools/perf/builtin-trace.c pr_err("Error during initialize raw_syscalls:sys_enter event\n"); pr_err 3631 tools/perf/builtin-trace.c pr_err("Error during initialize raw_syscalls:sys_exit event\n"); pr_err 3647 tools/perf/builtin-trace.c pr_err("Failed to process events, error %d", err); pr_err 4192 tools/perf/builtin-trace.c pr_err("Not enough memory to run!\n"); pr_err 4221 tools/perf/builtin-trace.c pr_err("ERROR: Setup trace syscalls enter failed: %s\n", bf); pr_err 4230 tools/perf/builtin-trace.c pr_err("ERROR: raw_syscalls:sys_enter not found in the augmented BPF object\n"); pr_err 4235 tools/perf/builtin-trace.c pr_err("ERROR: raw_syscalls:sys_enter not associated to a BPF object\n"); pr_err 4249 tools/perf/builtin-trace.c pr_err("ERROR: Setup BPF stdout failed: %s\n", bf); pr_err 4258 tools/perf/builtin-trace.c pr_err("ERROR: BPF map \"%s\" not found\n", map_dump_str); pr_err 394 tools/perf/perf.c pr_err("FATAL: unable to run '%s'", argv[0]); pr_err 222 tools/perf/pmu-events/jevents.c pr_err("%s: Unknown MSR in event file %.*s\n", prog, pr_err 261 tools/perf/pmu-events/jevents.c pr_err("%s:%d: " m ", got %s\n", fn, \ pr_err 499 tools/perf/pmu-events/jevents.c pr_err("%s: could not find matching %s for %s\n", pr_err 721 tools/perf/pmu-events/jevents.c pr_err("%s: Invalid character '%c' in file name %s\n", pr_err 1082 tools/perf/pmu-events/jevents.c pr_err("Usage: %s <arch> <starting_dir> <output_file>\n", prog); pr_err 1095 tools/perf/pmu-events/jevents.c pr_err("%s Unable to create required file %s (%s)\n", pr_err 53 tools/perf/pmu-events/json.c pr_err("Error opening events file '%s': %s\n", fn, pr_err 102 tools/perf/pmu-events/json.c pr_err("%s: json error %s\n", fn, jsmn_strerror(res)); pr_err 152 tools/perf/tests/attr.c pr_err("test attr FAILED"); pr_err 52 tools/perf/tests/backward-ring-buffer.c pr_err("Unexpected record of type %d\n", type); pr_err 145 tools/perf/tests/backward-ring-buffer.c pr_err("Unexpected counter: sample_count=%d, comm_count=%d\n", pr_err 322 tools/perf/tests/bpf.c pr_err("Missing basic BPF support, skip this test: %s\n", pr_err 343 tools/perf/tests/builtin-test.c pr_err("failed to fork test: %s\n", pr_err 184 tools/perf/tests/dwarf-unwind.c pr_err("Could not get machine\n"); pr_err 189 tools/perf/tests/dwarf-unwind.c pr_err("Failed to create kernel maps\n"); pr_err 197 tools/perf/tests/dwarf-unwind.c pr_err("Could not init machine\n"); pr_err 206 tools/perf/tests/dwarf-unwind.c pr_err("Could not get thread\n"); pr_err 32 tools/perf/tests/is_printable_array.c pr_err("failed: test %u\n", i); pr_err 130 tools/perf/tests/mmap-basic.c pr_err("Can't parse sample, err = %d\n", err); pr_err 66 tools/perf/tests/mmap-thread-lookup.c pr_err("failed to notify\n"); pr_err 407 tools/perf/ui/stdio/hist.c pr_err("Bad callchain mode\n"); pr_err 142 tools/perf/ui/tui/setup.c pr_err("TUI initialization failed.\n"); pr_err 1923 tools/perf/util/annotate.c pr_err("Failure allocating memory for the command to run\n"); pr_err 1931 tools/perf/util/annotate.c pr_err("Failure creating the pipe to run %s\n", command); pr_err 1937 tools/perf/util/annotate.c pr_err("Failure forking to run %s\n", command); pr_err 1955 tools/perf/util/annotate.c pr_err("Failure creating FILE stream for %s\n", command); pr_err 1977 tools/perf/util/annotate.c pr_err("No output from %s\n", command); pr_err 2103 tools/perf/util/annotate.c pr_err("%s: failed to initialize %s arch priv area\n", __func__, arch->name); pr_err 88 tools/perf/util/auxtrace.c pr_err("Cannot use AUX area tracing mmaps\n"); pr_err 256 tools/perf/util/auxtrace.c pr_err("auxtrace queue conflict: cpu %d, tid %d vs cpu %d, tid %d\n", pr_err 518 tools/perf/util/auxtrace.c pr_err("AUX area tracing is not supported on this architecture\n"); pr_err 596 tools/perf/util/auxtrace.c pr_err("No AUX area tracing to snapshot\n"); pr_err 1153 tools/perf/util/auxtrace.c pr_err("Bad Instruction Tracing options '%s'\n", str); pr_err 1754 tools/perf/util/auxtrace.c pr_err("#%d\t0x%"PRIx64"\t%c\t%s\n", pr_err 1759 tools/perf/util/auxtrace.c pr_err("\t\twhich is near\t\t%s\n", name); pr_err 1768 tools/perf/util/auxtrace.c pr_err("N'th occurrence (N=%d) of symbol '%s' not found.\n", pr_err 1771 tools/perf/util/auxtrace.c pr_err("Global symbol '%s' not found.\n", sym_name); pr_err 1773 tools/perf/util/auxtrace.c pr_err("Symbol '%s' not found.\n", sym_name); pr_err 1775 tools/perf/util/auxtrace.c pr_err("Note that symbols must be functions.\n"); pr_err 1795 tools/perf/util/auxtrace.c pr_err("Failed to parse /proc/kallsyms\n"); pr_err 1800 tools/perf/util/auxtrace.c pr_err("Multiple kernel symbols with name '%s'\n", sym_name); pr_err 1803 tools/perf/util/auxtrace.c pr_err("Disambiguate symbol name by inserting #n after the name e.g. %s #2\n", pr_err 1805 tools/perf/util/auxtrace.c pr_err("Or select a global symbol by inserting #0 or #g or #G\n"); pr_err 1810 tools/perf/util/auxtrace.c pr_err("Kernel symbol lookup: "); pr_err 1845 tools/perf/util/auxtrace.c pr_err("Failed to parse /proc/kallsyms\n"); pr_err 1861 tools/perf/util/auxtrace.c pr_err("Symbol '%s' (0x%"PRIx64") comes before '%s' (0x%"PRIx64")\n", pr_err 1864 tools/perf/util/auxtrace.c pr_err("Symbol '%s' (0x%"PRIx64") comes before address 0x%"PRIx64")\n", pr_err 1878 tools/perf/util/auxtrace.c pr_err("Kernel addresses are restricted. Unable to resolve kernel symbols.\n"); pr_err 1912 tools/perf/util/auxtrace.c pr_err("Cannot determine size of symbol '%s'\n", pr_err 1930 tools/perf/util/auxtrace.c pr_err("File '%s' not found or has no symbols.\n", name); pr_err 1955 tools/perf/util/auxtrace.c pr_err("Multiple symbols with name '%s'\n", sym_name); pr_err 1960 tools/perf/util/auxtrace.c pr_err("#%d\t0x%"PRIx64"\t%c\t%s\n", pr_err 1968 tools/perf/util/auxtrace.c pr_err("\t\twhich is near\t\t%s\n", sym->name); pr_err 1973 tools/perf/util/auxtrace.c pr_err("Disambiguate symbol name by inserting #n after the name e.g. %s #2\n", pr_err 1975 tools/perf/util/auxtrace.c pr_err("Or select a global symbol by inserting #0 or #g or #G\n"); pr_err 2015 tools/perf/util/auxtrace.c pr_err("Failed to determine filter for %s\nCannot determine file size.\n", pr_err 2040 tools/perf/util/auxtrace.c pr_err("Failed to load symbols from: %s\n", filt->filename); pr_err 2118 tools/perf/util/auxtrace.c pr_err("Error: number of address filters (%d) exceeds maximum (%d)\n", pr_err 2147 tools/perf/util/auxtrace.c pr_err("Failed to parse address filter: '%s'\n", filter); pr_err 2148 tools/perf/util/auxtrace.c pr_err("Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]\n"); pr_err 2149 tools/perf/util/auxtrace.c pr_err("Where multiple filters are separated by space or comma.\n"); pr_err 635 tools/perf/util/auxtrace.h pr_err("AUX area tracing not supported\n"); pr_err 646 tools/perf/util/auxtrace.h pr_err("AUX area tracing not supported\n"); pr_err 45 tools/perf/util/bpf-prologue.c pr_err("bpf prologue: prologue too long\n"); pr_err 118 tools/perf/util/bpf-prologue.c pr_err("bpf: prologue: failed to get register %s\n", pr_err 259 tools/perf/util/bpf-prologue.c pr_err("prologue: failed to get offset of register %s\n", pr_err 285 tools/perf/util/bpf-prologue.c pr_err("prologue: failed to generate probe_read function call\n"); pr_err 349 tools/perf/util/bpf-prologue.c pr_err("bpf prologue: internal error: relocation failed\n"); pr_err 402 tools/perf/util/bpf-prologue.c pr_err("bpf: prologue: global %s%+ld not support\n", pr_err 422 tools/perf/util/bpf-prologue.c pr_err("bpf: prologue: offset out of bound: %ld\n", pr_err 50 tools/perf/util/build-id.c pr_err("problem processing %d event, skipping it.\n", pr_err 162 tools/perf/util/callchain.c pr_err("callchain: Incorrect stack dump size (max %ld): %s\n", pr_err 234 tools/perf/util/callchain.c pr_err("Can't register callchain params\n"); pr_err 273 tools/perf/util/callchain.c pr_err("callchain: No more arguments " pr_err 298 tools/perf/util/callchain.c pr_err("callchain: No more arguments " pr_err 302 tools/perf/util/callchain.c pr_err("callchain: Unknown --call-graph option " pr_err 336 tools/perf/util/callchain.c pr_err("Invalid callchain mode: %s\n", value); pr_err 343 tools/perf/util/callchain.c pr_err("Invalid callchain order: %s\n", value); pr_err 350 tools/perf/util/callchain.c pr_err("Invalid callchain sort key: %s\n", value); pr_err 356 tools/perf/util/callchain.c pr_err("Invalid callchain threshold: %s\n", value); pr_err 363 tools/perf/util/callchain.c pr_err("Invalid callchain print limit: %s\n", value); pr_err 293 tools/perf/util/config.c pr_err("bad config file line %d in %s\n", config_linenr, config_file_name); pr_err 414 tools/perf/util/config.c pr_err("Invalid buildid directory!\n"); pr_err 743 tools/perf/util/config.c pr_err("Error: wrong config key-value pair %s=%s\n", pr_err 818 tools/perf/util/config.c pr_err("Missing value for '%s'", var); pr_err 303 tools/perf/util/cpumap.c pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX); pr_err 314 tools/perf/util/cpumap.c pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX); pr_err 322 tools/perf/util/cpumap.c pr_err("Failed to read max cpus, using default of %d\n", max_cpu_num); pr_err 342 tools/perf/util/cpumap.c pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX); pr_err 350 tools/perf/util/cpumap.c pr_err("Failed to read max nodes, using default of %d\n", max_node_num); pr_err 397 tools/perf/util/cpumap.c pr_err("%s: calloc failed\n", __func__); pr_err 427 tools/perf/util/cpumap.c pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX); pr_err 442 tools/perf/util/cpumap.c pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX); pr_err 1152 tools/perf/util/cs-etm.c pr_err( pr_err 1223 tools/perf/util/cs-etm.c pr_err( pr_err 1991 tools/perf/util/cs-etm.c pr_err("CS ETM Trace: empty packet\n"); pr_err 2263 tools/perf/util/cs-etm.c pr_err("CoreSight ETM Trace requires ordered events\n"); pr_err 105 tools/perf/util/data-convert-bt.c pr_err("failed to create a field %s\n", name); pr_err 112 tools/perf/util/data-convert-bt.c pr_err("failed to set field value %s\n", name); pr_err 118 tools/perf/util/data-convert-bt.c pr_err("failed to set field value %s\n", name); pr_err 125 tools/perf/util/data-convert-bt.c pr_err("failed to set payload %s\n", name); pr_err 165 tools/perf/util/data-convert-bt.c pr_err("failed to create a field %s\n", name); pr_err 171 tools/perf/util/data-convert-bt.c pr_err("failed to set value %s\n", name); pr_err 177 tools/perf/util/data-convert-bt.c pr_err("failed to set payload %s\n", name); pr_err 268 tools/perf/util/data-convert-bt.c pr_err("failed to set unprintable string '%s'\n", string); pr_err 327 tools/perf/util/data-convert-bt.c pr_err("Failed to create array type %s\n", name); pr_err 347 tools/perf/util/data-convert-bt.c pr_err("failed to create a field %s\n", name); pr_err 369 tools/perf/util/data-convert-bt.c pr_err("failed to set file value %s\n", name); pr_err 375 tools/perf/util/data-convert-bt.c pr_err("failed to set payload %s\n", name); pr_err 384 tools/perf/util/data-convert-bt.c pr_err("Failed add payload array %s\n", name); pr_err 452 tools/perf/util/data-convert-bt.c pr_err("failed to create 'raw_len' for bpf output event\n"); pr_err 459 tools/perf/util/data-convert-bt.c pr_err("failed to set field value for raw_len\n"); pr_err 464 tools/perf/util/data-convert-bt.c pr_err("failed to set payload to raw_len\n"); pr_err 471 tools/perf/util/data-convert-bt.c pr_err("failed to create 'raw_data' for bpf output event\n"); pr_err 478 tools/perf/util/data-convert-bt.c pr_err("failed to set length of 'raw_data'\n"); pr_err 491 tools/perf/util/data-convert-bt.c pr_err("failed to set raw_data[%d]\n", i); pr_err 498 tools/perf/util/data-convert-bt.c pr_err("failed to set payload for raw_data\n"); pr_err 526 tools/perf/util/data-convert-bt.c pr_err("failed to create 'perf_callchain_size' for callchain output event\n"); pr_err 533 tools/perf/util/data-convert-bt.c pr_err("failed to set field value for perf_callchain_size\n"); pr_err 538 tools/perf/util/data-convert-bt.c pr_err("failed to set payload to perf_callchain_size\n"); pr_err 546 tools/perf/util/data-convert-bt.c pr_err("failed to create 'perf_callchain' for callchain output event\n"); pr_err 553 tools/perf/util/data-convert-bt.c pr_err("failed to set length of 'perf_callchain'\n"); pr_err 566 tools/perf/util/data-convert-bt.c pr_err("failed to set callchain[%d]\n", i); pr_err 573 tools/perf/util/data-convert-bt.c pr_err("failed to set payload for raw_data\n"); pr_err 670 tools/perf/util/data-convert-bt.c pr_err("CTF stream %d flush failed\n", cs->cpu); pr_err 691 tools/perf/util/data-convert-bt.c pr_err("Failed to allocate ctf stream\n"); pr_err 697 tools/perf/util/data-convert-bt.c pr_err("Failed to create CTF stream\n"); pr_err 703 tools/perf/util/data-convert-bt.c pr_err("Failed to obtain packet context\n"); pr_err 710 tools/perf/util/data-convert-bt.c pr_err("Failed to obtain cpu field\n"); pr_err 716 tools/perf/util/data-convert-bt.c pr_err("Failed to update CPU number\n"); pr_err 765 tools/perf/util/data-convert-bt.c pr_err("Event was recorded for CPU %d, limit is at %d.\n", pr_err 814 tools/perf/util/data-convert-bt.c pr_err("Failed to create an CTF event\n"); pr_err 881 tools/perf/util/data-convert-bt.c pr_err("Failed to create an CTF event\n"); \ pr_err 992 tools/perf/util/data-convert-bt.c pr_err("Failed to fix invalid identifier."); pr_err 999 tools/perf/util/data-convert-bt.c pr_err("Failed to create dup name for '%s'\n", field->name); pr_err 1045 tools/perf/util/data-convert-bt.c pr_err("Failed to add field '%s': %d\n", pr_err 1110 tools/perf/util/data-convert-bt.c pr_err("Failed to add field '%s';\n", n); \ pr_err 1199 tools/perf/util/data-convert-bt.c pr_err("Failed to add event '%s'.\n", name); pr_err 1221 tools/perf/util/data-convert-bt.c pr_err("Failed to add field '%s';\n", #n);\ pr_err 1341 tools/perf/util/data-convert-bt.c pr_err("Failed to allocate streams.\n"); pr_err 1467 tools/perf/util/data-convert-bt.c pr_err("Failed to create data types.\n"); pr_err 1552 tools/perf/util/data-convert-bt.c pr_err("Failed to setup CTF writer.\n"); pr_err 1651 tools/perf/util/data-convert-bt.c pr_err("Error during conversion.\n"); pr_err 1677 tools/perf/util/data-convert-bt.c pr_err("Error during conversion setup.\n"); pr_err 192 tools/perf/util/data.c pr_err("Can't remove old data: %s (%s)\n", pr_err 200 tools/perf/util/data.c pr_err("Can't move data: %s (%s to %s)\n", pr_err 230 tools/perf/util/data.c pr_err("failed to open %s: %s", data->file.path, pr_err 233 tools/perf/util/data.c pr_err(" (try 'perf record' first)"); pr_err 234 tools/perf/util/data.c pr_err("\n"); pr_err 242 tools/perf/util/data.c pr_err("File %s not owned by current user or root (use -f to override)\n", pr_err 270 tools/perf/util/data.c pr_err("failed to open %s : %s\n", data->file.path, pr_err 203 tools/perf/util/debug.c pr_err("Unknown debug variable name '%s'\n", s); pr_err 211 tools/perf/util/demangle-rust.c pr_err("demangle-rust: unexpected escape sequence"); pr_err 247 tools/perf/util/demangle-rust.c pr_err("demangle-rust: unexpected character '%c' in symbol\n", pr_err 249 tools/perf/util/dso.c pr_err("Failed to check whether %s is a kernel module or not. Assume it is.", pr_err 585 tools/perf/util/dso.c pr_err("failed to get fd limit\n"); pr_err 972 tools/perf/util/dso.c pr_err("dso cache fstat failed: %s\n", pr_err 1205 tools/perf/util/dso.c pr_err("DSO %s is still in rbtree when being deleted!\n", pr_err 72 tools/perf/util/dsos.c pr_err("Duplicated dso name: %s\n", name); pr_err 57 tools/perf/util/dwarf-regs.c pr_err("ELF MACHINE %x is not supported.\n", machine); pr_err 857 tools/perf/util/evlist.c pr_err("Invalid argument for --mmap_pages/-m\n"); pr_err 872 tools/perf/util/evsel.c pr_err("per-event callgraph setting for %s failed. " pr_err 1699 tools/perf/util/evsel.c pr_err("failed to attach bpf fd %d: %s\n", pr_err 888 tools/perf/util/header.c pr_err("Failed to write auxtrace index\n"); pr_err 2516 tools/perf/util/header.c pr_err("Failed to process auxtrace index\n"); pr_err 3565 tools/perf/util/header.c pr_err("ERROR: The %s file's attr size field is 0 which is unexpected.\n" pr_err 3795 tools/perf/util/header.c pr_err("failed to get event_update cpus\n"); pr_err 3820 tools/perf/util/header.c pr_err("%s: reading input file", __func__); pr_err 3826 tools/perf/util/header.c pr_err("%s: repiping tracing data padding", __func__); pr_err 3832 tools/perf/util/header.c pr_err("%s: tracing data size mismatch", __func__); pr_err 142 tools/perf/util/intel-bts.c pr_err("Intel BTS: failed to deliver error event, error %d\n", pr_err 312 tools/perf/util/intel-bts.c pr_err("Intel BTS: failed to deliver branch event, error %d\n", pr_err 356 tools/perf/util/intel-bts.c pr_err("Intel BTS: failed to deliver error event, error %d\n", pr_err 605 tools/perf/util/intel-bts.c pr_err("Intel BTS requires ordered events\n"); pr_err 810 tools/perf/util/intel-bts.c pr_err("%s: failed to synthesize 'branches' event type\n", pr_err 1264 tools/perf/util/intel-pt.c pr_err("Intel PT: failed to deliver event, error %d\n", ret); pr_err 1838 tools/perf/util/intel-pt.c pr_err("Intel Processor Trace: failed to deliver error event, error %d\n", pr_err 2478 tools/perf/util/intel-pt.c pr_err("Expecting CPU-wide context switch event\n"); pr_err 2491 tools/perf/util/intel-pt.c pr_err("context_switch event has no tid\n"); pr_err 2537 tools/perf/util/intel-pt.c pr_err("Intel Processor Trace requires ordered events\n"); pr_err 2711 tools/perf/util/intel-pt.c pr_err("%s: failed to synthesize '%s' event type\n", pr_err 3153 tools/perf/util/intel-pt.c pr_err("%s: bad filter string length\n", __func__); pr_err 3165 tools/perf/util/intel-pt.c pr_err("%s: filter string not null terminated\n", __func__); pr_err 3219 tools/perf/util/intel-pt.c pr_err("%s: missing sched_switch event\n", __func__); pr_err 3225 tools/perf/util/intel-pt.c pr_err("%s: missing context_switch attribute flag\n", __func__); pr_err 189 tools/perf/util/jitdump.c pr_err("wrong jitdump version %u, expected " __stringify(JITHEADER_VERSION), pr_err 195 tools/perf/util/jitdump.c pr_err("jitdump file contains invalid or unsupported flags 0x%llx\n", pr_err 201 tools/perf/util/jitdump.c pr_err("jitdump file uses arch timestamps but there is no timestamp conversion\n"); pr_err 209 tools/perf/util/jitdump.c pr_err("error, jitted code must be sampled with perf record -k 1\n"); pr_err 123 tools/perf/util/llvm-utils.c pr_err("ERROR: unable to popen cmd: %s\n", pr_err 140 tools/perf/util/llvm-utils.c pr_err("ERROR: failed to realloc memory\n"); pr_err 151 tools/perf/util/llvm-utils.c pr_err("ERROR: internal error\n"); pr_err 157 tools/perf/util/llvm-utils.c pr_err("ERROR: error occurred when reading from pipe: %s\n", pr_err 212 tools/perf/util/llvm-utils.c pr_err( pr_err 387 tools/perf/util/llvm-utils.c pr_err( pr_err 451 tools/perf/util/llvm-utils.c pr_err("ERROR: problems with path %s: %s\n", pr_err 462 tools/perf/util/llvm-utils.c pr_err( pr_err 498 tools/perf/util/llvm-utils.c pr_err("ERROR:\tunable to find llc.\n" pr_err 507 tools/perf/util/llvm-utils.c pr_err("ERROR:\tnot enough memory to setup command line\n"); pr_err 536 tools/perf/util/llvm-utils.c pr_err("ERROR:\tunable to compile %s\n", path); pr_err 537 tools/perf/util/llvm-utils.c pr_err("Hint:\tCheck error message shown above.\n"); pr_err 538 tools/perf/util/llvm-utils.c pr_err("Hint:\tYou can also pre-compile it into .o using:\n"); pr_err 539 tools/perf/util/llvm-utils.c pr_err(" \t\tclang -target bpf -O2 -c %s\n", path); pr_err 540 tools/perf/util/llvm-utils.c pr_err(" \twith proper -I and -D options.\n"); pr_err 48 tools/perf/util/lzma.c pr_err("lzma: fopen failed on %s: '%s'\n", pr_err 55 tools/perf/util/lzma.c pr_err("lzma: lzma_stream_decoder failed %s (%d)\n", pr_err 71 tools/perf/util/lzma.c pr_err("lzma: read error: %s\n", strerror(errno)); pr_err 85 tools/perf/util/lzma.c pr_err("lzma: write error: %s\n", strerror(errno)); pr_err 97 tools/perf/util/lzma.c pr_err("lzma: failed %s\n", lzma_strerror(ret)); pr_err 352 tools/perf/util/machine.c pr_err("Can't access file %s\n", path); pr_err 426 tools/perf/util/machine.c pr_err("Discarding thread maps for %d:%d\n", pr_err 436 tools/perf/util/machine.c pr_err("Failed to join map groups for %d:%d\n", th->pid_, th->tid); pr_err 2618 tools/perf/util/machine.c pr_err("Requested CPU %d too large. ", cpu); pr_err 2619 tools/perf/util/machine.c pr_err("Consider raising MAX_NR_CPUS\n"); pr_err 1031 tools/perf/util/map.c pr_err("Internal error: map__kmap with a non-kernel map\n"); pr_err 1040 tools/perf/util/map.c pr_err("Internal error: map__kmaps with a non-kernel map\n"); pr_err 78 tools/perf/util/mem-events.c pr_err("failed: event '%s' not found, use '-e list' to get list of available events\n", str); pr_err 202 tools/perf/util/mmap.c pr_err("Failed to bind [%p-%p] AIO buffer to node %d: error %m\n", pr_err 331 tools/perf/util/pmu.c pr_err("Cannot parse alias %s: %d\n", val, ret); pr_err 51 tools/perf/util/probe-event.c #define semantic_error(msg ...) pr_err("Semantic error :" msg) pr_err 467 tools/perf/util/probe-event.c pr_err("Module %s is not loaded, please specify its full path name.\n", module); pr_err 469 tools/perf/util/probe-event.c pr_err("Failed to find the path for the kernel: %s\n", reason); pr_err 1069 tools/perf/util/probe-event.c pr_err("Failed to find the address of %s\n", buf); pr_err 1503 tools/perf/util/probe-event.c pr_err("This program has a bug at %s:%d.\n", pr_err 2911 tools/perf/util/probe-event.c pr_err("Failed to find symbol %s in %s\n", pp->function, pr_err 2916 tools/perf/util/probe-event.c pr_err("Too many functions matched in %s\n", pr_err 3514 tools/perf/util/probe-event.c pr_err("Failed to get a map for %s\n", (target) ? : "kernel"); pr_err 3522 tools/perf/util/probe-event.c pr_err("Failed to find symbols matched to \"%s\"\n", pr_err 3526 tools/perf/util/probe-event.c pr_err("Failed to load symbols in %s\n", pr_err 445 tools/perf/util/probe-finder.c pr_err("Semantic error: %s must be referred by '->'\n", pr_err 477 tools/perf/util/probe-finder.c pr_err("Semantic error: %s is not a pointer" pr_err 483 tools/perf/util/probe-finder.c pr_err("Semantic error: %s must be referred by '.'\n", pr_err 540 tools/perf/util/probe-finder.c pr_err("Failed to find the location of the '%s' variable at this address.\n" pr_err 545 tools/perf/util/probe-finder.c pr_err("Sorry, we don't support this variable location yet.\n"); pr_err 662 tools/perf/util/probe-finder.c pr_err("Caller must pass a scope DIE. Program error.\n"); pr_err 54 tools/perf/util/pstack.c pr_err("%s: %p not on the pstack!\n", __func__, key); pr_err 60 tools/perf/util/pstack.c pr_err("%s: top=%d, overflow!\n", __func__, pstack->top); pr_err 71 tools/perf/util/pstack.c pr_err("%s: underflow!\n", __func__); pr_err 216 tools/perf/util/record.c pr_err("frequency and count are zero, aborting\n"); pr_err 228 tools/perf/util/record.c pr_err("error: Maximum frequency rate (%'u Hz) exceeded.\n" pr_err 320 tools/perf/util/record.c pr_err("couldn't read /proc/sys/kernel/perf_event_max_sample_rate\n"); pr_err 220 tools/perf/util/s390-cpumsf.c pr_err("Failed to open counter set log file %s, " pr_err 232 tools/perf/util/s390-cpumsf.c pr_err("Failed to write counter set data\n"); pr_err 267 tools/perf/util/s390-cpumsf.c pr_err("Invalid AUX trace basic entry [%#08zx]\n", pos); pr_err 300 tools/perf/util/s390-cpumsf.c pr_err("Invalid AUX trace diagnostic entry [%#08zx]\n", pos); pr_err 342 tools/perf/util/s390-cpumsf.c pr_err("Invalid AUX trace trailer entry [%#08zx]\n", pos); pr_err 447 tools/perf/util/s390-cpumsf.c pr_err("Invalid AUX trace data block size:%zu" pr_err 540 tools/perf/util/s390-cpumsf.c pr_err("s390 Auxiliary Trace: failed to deliver event\n"); pr_err 623 tools/perf/util/s390-cpumsf.c pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n", pr_err 724 tools/perf/util/s390-cpumsf.c pr_err("Failed to write auxiliary data\n"); pr_err 742 tools/perf/util/s390-cpumsf.c pr_err("Failed to write auxiliary data\n"); pr_err 789 tools/perf/util/s390-cpumsf.c pr_err("Failed to open auxiliary log file %s," pr_err 898 tools/perf/util/s390-cpumsf.c pr_err("s390 Auxiliary Trace: failed to deliver error event," pr_err 928 tools/perf/util/s390-cpumsf.c pr_err("s390 Auxiliary Trace requires ordered events\n"); pr_err 1077 tools/perf/util/s390-cpumsf.c pr_err("Unsupported --itrace options specified\n"); pr_err 1095 tools/perf/util/s390-cpumsf.c pr_err("Failed to find auxtrace log directory %s," pr_err 1101 tools/perf/util/s390-cpumsf.c pr_err("Missing auxtrace log directory %s," pr_err 74 tools/perf/util/s390-sample-raw.c pr_err("Invalid counter set entry at %zd\n", offset); pr_err 215 tools/perf/util/s390-sample-raw.c pr_err("Invalid counter set data encountered\n"); pr_err 251 tools/perf/util/scripting-engines/trace-event-perl.c pr_err("Unsupported print arg type\n"); pr_err 275 tools/perf/util/scripting-engines/trace-event-perl.c pr_err("Failed to resolve callchain. Skipping\n"); pr_err 410 tools/perf/util/scripting-engines/trace-event-python.c pr_err("Failed to resolve callchain. Skipping\n"); pr_err 57 tools/perf/util/session.c pr_err("Couldn't allocate memory for decompression\n"); pr_err 77 tools/perf/util/session.c pr_err("Couldn't decompress data\n"); pr_err 109 tools/perf/util/session.c pr_err("incompatible file format (rerun with -v to learn more)\n"); pr_err 120 tools/perf/util/session.c pr_err("non matching sample_type\n"); pr_err 125 tools/perf/util/session.c pr_err("non matching sample_id_all\n"); pr_err 130 tools/perf/util/session.c pr_err("non matching read_format\n"); pr_err 874 tools/perf/util/session.c pr_err("cpu_map swap: unsupported long size\n"); pr_err 1484 tools/perf/util/session.c pr_err("Can't parse sample, err = %d\n", ret); pr_err 1711 tools/perf/util/session.c pr_err("problem inserting idle task.\n"); pr_err 1716 tools/perf/util/session.c pr_err("problem inserting idle task.\n"); pr_err 1881 tools/perf/util/session.c pr_err("failed to read event header\n"); pr_err 1890 tools/perf/util/session.c pr_err("bad event header size\n"); pr_err 1897 tools/perf/util/session.c pr_err("failed to allocate memory to read event\n"); pr_err 1911 tools/perf/util/session.c pr_err("unexpected end of event stream\n"); pr_err 1915 tools/perf/util/session.c pr_err("failed to read event data\n"); pr_err 1921 tools/perf/util/session.c pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", pr_err 2018 tools/perf/util/session.c pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", pr_err 2096 tools/perf/util/session.c pr_err("failed to mmap file\n"); pr_err 2131 tools/perf/util/session.c pr_err("%#" PRIx64 " [%#x]: failed to process type: %d [%s]\n", pr_err 2232 tools/perf/util/session.c pr_err("No trace sample to read. Did you call 'perf %s'?\n", msg); pr_err 2326 tools/perf/util/session.c pr_err("File does not contain CPU events. " pr_err 2334 tools/perf/util/session.c pr_err("Invalid cpu_list\n"); pr_err 2342 tools/perf/util/session.c pr_err("Requested CPU %d too large. " pr_err 1885 tools/perf/util/sort.c pr_err("Memory allocation failed\n"); pr_err 2590 tools/perf/util/sort.c pr_err("Invalid regex: %s\n%s", parent_pattern, err); pr_err 2699 tools/perf/util/sort.c pr_err("The \"dcacheline\" --sort key needs to know the cacheline size and it couldn't be determined on this system"); pr_err 2701 tools/perf/util/sort.c pr_err("Invalid --sort key: `%s'", tok); pr_err 2704 tools/perf/util/sort.c pr_err("Unknown --sort key: `%s'", tok); pr_err 2761 tools/perf/util/sort.c pr_err("Invalid --sort key: `+'"); pr_err 2771 tools/perf/util/sort.c pr_err("Not enough memory to set up --sort"); pr_err 2835 tools/perf/util/sort.c pr_err("Not enough memory to setup sort keys"); pr_err 2845 tools/perf/util/sort.c pr_err("Not enough memory to setup overhead keys"); pr_err 3044 tools/perf/util/sort.c pr_err("Not enough memory to setup output fields"); pr_err 3052 tools/perf/util/sort.c pr_err("Invalid --fields key: `+'"); pr_err 466 tools/perf/util/srcline.c pr_err("popen failed for %s\n", dso_name); pr_err 290 tools/perf/util/stat.c pr_err("failed to read per-pkg counter\n"); pr_err 416 tools/perf/util/stat.c pr_err("Failed to resolve counter for stat event.\n"); pr_err 93 tools/perf/util/symbol-elf.c pr_err("%s: update your libelf to > 0.140, this one lacks elf_getshdrstrndx().\n", __func__); pr_err 472 tools/perf/util/symbol-elf.c pr_err("%s: cannot get elf header.\n", __func__); pr_err 637 tools/perf/util/symbol-elf.c pr_err("%s: cannot get elf header.\n", __func__); pr_err 683 tools/perf/util/symbol-elf.c pr_err("unrecognized DSO data encoding %d\n", eidata); pr_err 2073 tools/perf/util/symbol-elf.c pr_err("gelf_xlatetom : %s\n", elf_errmsg(-1)); pr_err 1977 tools/perf/util/symbol.c pr_err("No kallsyms or vmlinux with build-id %s was found\n", pr_err 2175 tools/perf/util/symbol.c pr_err("problems parsing %s list\n", list_name); pr_err 2191 tools/perf/util/symbol.c pr_err("problems parsing %s list\n", list_name); pr_err 2228 tools/perf/util/symbol.c pr_err("Annotation needs to be init before symbol__init()\n"); pr_err 2256 tools/perf/util/symbol.c pr_err("'.' is the only non valid --field-separator argument\n"); pr_err 1639 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize evsel unit.\n"); pr_err 1647 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize evsel evsel.\n"); pr_err 1655 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize evsel cpus.\n"); pr_err 1667 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize evsel name.\n"); pr_err 1786 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize attrs.\n"); pr_err 1794 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize thread map.\n"); pr_err 1800 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize thread map.\n"); pr_err 1806 tools/perf/util/synthetic-events.c pr_err("Couldn't synthesize config.\n"); pr_err 329 tools/perf/util/thread-stack.c pr_err("Error flushing thread stack!\n"); pr_err 478 tools/perf/util/time-utils.c pr_err("HINT: no first/last sample time found in perf data.\n" pr_err 513 tools/perf/util/time-utils.c pr_err("Invalid time string\n"); pr_err 81 tools/perf/util/trace-event-scripting.c pr_err("Error registering Python script extension: disabling it\n"); pr_err 144 tools/perf/util/trace-event-scripting.c pr_err("Error registering Perl script extension: disabling it\n"); pr_err 175 tools/perf/util/unwind-libdw.c pr_err("%s", dwfl_errmsg(-1)); pr_err 183 tools/perf/util/unwind-libdw.c pr_err("%s", dwfl_errmsg(-1)); pr_err 435 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: access_fpreg unsupported\n"); pr_err 450 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: resume unsupported\n"); pr_err 460 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: get_proc_name unsupported\n"); pr_err 541 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: access_reg w %d\n", regnum); pr_err 556 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: can't read reg %d\n", regnum); pr_err 594 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: Only supports local.\n"); pr_err 597 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: Unspecified error.\n"); pr_err 600 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: Register unavailable.\n"); pr_err 622 tools/perf/util/unwind-libunwind-local.c pr_err("unwind: Can't create unwind address space.\n"); pr_err 59 tools/perf/util/unwind-libunwind.c pr_err("unwind: target platform=%s is not supported\n", arch); pr_err 225 tools/perf/util/vdso.c pr_err("%s failed, error %d\n", vdso_file->read_prog, err); pr_err 14 tools/perf/util/zstd.c pr_err("Couldn't create decompression stream.\n"); pr_err 20 tools/perf/util/zstd.c pr_err("Failed to initialize decompression stream: %s\n", ZSTD_getErrorName(ret)); pr_err 29 tools/perf/util/zstd.c pr_err("Couldn't create compression stream.\n"); pr_err 35 tools/perf/util/zstd.c pr_err("Failed to initialize compression stream: %s\n", ZSTD_getErrorName(ret)); pr_err 77 tools/perf/util/zstd.c pr_err("failed to compress %ld bytes: %s\n", pr_err 102 tools/perf/util/zstd.c pr_err("failed to decompress (B): %ld -> %ld, dst_size %ld : %s\n", pr_err 39 tools/testing/selftests/nsfs/owner.c return pr_err("fork"); pr_err 43 tools/testing/selftests/nsfs/owner.c return pr_err("unshare"); pr_err 52 tools/testing/selftests/nsfs/owner.c return pr_err("Unable to read from pipe"); pr_err 58 tools/testing/selftests/nsfs/owner.c return pr_err("Unable to open %s", path); pr_err 62 tools/testing/selftests/nsfs/owner.c return pr_err("Unable to get an owning user namespace"); pr_err 65 tools/testing/selftests/nsfs/owner.c return pr_err("fstat"); pr_err 69 tools/testing/selftests/nsfs/owner.c return pr_err("stat"); pr_err 72 tools/testing/selftests/nsfs/owner.c return pr_err("NS_GET_USERNS returned a wrong namespace"); pr_err 76 tools/testing/selftests/nsfs/owner.c return pr_err("Unable to get an owning user namespace"); pr_err 79 tools/testing/selftests/nsfs/owner.c return pr_err("Don't get EPERM"); pr_err 82 tools/testing/selftests/nsfs/owner.c return pr_err("unshare"); pr_err 85 tools/testing/selftests/nsfs/owner.c return pr_err("Don't get EPERM"); pr_err 87 tools/testing/selftests/nsfs/owner.c return pr_err("Don't get EPERM"); pr_err 52 tools/testing/selftests/nsfs/pidns.c return pr_err("clone"); pr_err 58 tools/testing/selftests/nsfs/pidns.c return pr_err("Unable to open %s", path); pr_err 62 tools/testing/selftests/nsfs/pidns.c return pr_err("Unable to get a parent pidns"); pr_err 66 tools/testing/selftests/nsfs/pidns.c return pr_err("Unable to stat %s", path); pr_err 68 tools/testing/selftests/nsfs/pidns.c return pr_err("Unable to stat the parent pidns"); pr_err 70 tools/testing/selftests/nsfs/pidns.c return pr_err("NS_GET_PARENT returned a wrong namespace"); pr_err 73 tools/testing/selftests/nsfs/pidns.c return pr_err("Don't get EPERM"); pr_err 320 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_err(rc, "pthread_create()"); pr_err 326 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_err(rc, "pthread_join"); pr_err 355 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_err(rc, "pthread_attr_init()"); pr_err 360 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_err(rc, "pthread_attr_setaffinity_np()"); pr_err 364 tools/testing/selftests/powerpc/tm/tm-unavailable.c pr_err(rc, "pthread_create()"); pr_err 38 tools/virtio/virtio-trace/trace-agent-ctl.c pr_err("Cannot open ctl_fd\n"); pr_err 72 tools/virtio/virtio-trace/trace-agent-ctl.c pr_err("Polling error\n"); pr_err 108 tools/virtio/virtio-trace/trace-agent-ctl.c pr_err("read data error in ctl thread\n"); pr_err 26 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("rw_thread_info zalloc error\n"); pr_err 51 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Could not open in_fd (CPU:%d)\n", cpu); pr_err 60 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Could not open out_fd (CPU:%d)\n", cpu); pr_err 68 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Could not create pipe in rw-thread(%d)\n", cpu); pr_err 77 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Could not change pipe size in rw-thread(%d)\n", cpu); pr_err 101 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Could not set CPU#%d affinity\n", (int)cpu_num); pr_err 131 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Splice_read in rw-thread(%d)\n", ts->cpu_num); pr_err 153 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Splice_write in rw-thread(%d)\n", pr_err 185 tools/virtio/virtio-trace/trace-agent-rw.c pr_err("Could not create a rw thread(%d)\n", rw_ti->cpu_num); pr_err 34 tools/virtio/virtio-trace/trace-agent.c pr_err("Could not read cpus\n"); pr_err 37 tools/virtio/virtio-trace/trace-agent.c pr_err("Exceed max cpus(%d)\n", (int)MAX_CPUS); pr_err 54 tools/virtio/virtio-trace/trace-agent.c pr_err("agent_info zalloc error\n"); pr_err 88 tools/virtio/virtio-trace/trace-agent.c pr_err("Pipe size must be less than 1MB\n"); pr_err 91 tools/virtio/virtio-trace/trace-agent.c pr_err("Pipe size must be over 64KB\n"); pr_err 106 tools/virtio/virtio-trace/trace-agent.c pr_err("usage: %s [-h] [-o] [-s <size of pipe>]\n", prg); pr_err 116 tools/virtio/virtio-trace/trace-agent.c pr_err("Could not allocate buffer\n"); pr_err 128 tools/virtio/virtio-trace/trace-agent.c pr_err("Failed to generate %s path(CPU#%d):%d\n", pr_err 235 tools/virtio/virtio-trace/trace-agent.c pr_err("pthread_join() error:%d (cpu %d)\n", ret, cpu); pr_err 4030 virt/kvm/kvm_main.c pr_err("kvm: failed to shrink bus, removing it completely\n"); pr_err 4467 virt/kvm/kvm_main.c pr_err("kvm: misc device register failed\n");