nsp32_msg 399 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, nsp32_msg 461 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "bus busy"); nsp32_msg 474 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!"); nsp32_msg 541 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "unknown trans_method"); nsp32_msg 598 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "bus busy"); nsp32_msg 634 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!"); nsp32_msg 826 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "unknown id/lun"); nsp32_msg 829 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "no SCSI command is processing"); nsp32_msg 878 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, nsp32_msg 911 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request"); nsp32_msg 960 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "SGT fail"); nsp32_msg 1113 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "term power on"); nsp32_msg 1181 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "card disconnect"); nsp32_msg 1183 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "clean up current SCSI command"); nsp32_msg 1199 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "detected someone do bus reset"); nsp32_msg 1209 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened"); nsp32_msg 1210 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); nsp32_msg 1317 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, nsp32_msg 1388 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "phase chg/other phase?"); nsp32_msg 1389 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n", nsp32_msg 1405 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! "); nsp32_msg 1688 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "unexpected bus free occurred"); nsp32_msg 1761 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "resid underflow"); nsp32_msg 1864 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "Target or Lun is invalid"); nsp32_msg 1989 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, nsp32_msg 2029 drivers/scsi/nsp32.c nsp32_msg (KERN_WARNING, nsp32_msg 2054 drivers/scsi/nsp32.c nsp32_msg (KERN_WARNING, nsp32_msg 2205 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, nsp32_msg 2360 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!"); nsp32_msg 2460 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "unknown state designation"); nsp32_msg 2476 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit); nsp32_msg 2489 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "unknown state designation"); nsp32_msg 2505 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit); nsp32_msg 2560 drivers/scsi/nsp32.c nsp32_msg (KERN_ERR, "failed to scsi register"); nsp32_msg 2615 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, nsp32_msg 2631 drivers/scsi/nsp32.c nsp32_msg (KERN_ERR, "failed to set PCI DMA mask"); nsp32_msg 2642 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "failed to allocate DMA memory"); nsp32_msg 2652 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "failed to allocate DMA memory"); nsp32_msg 2723 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 " nsp32_msg 2733 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, nsp32_msg 2741 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "failed to add scsi host"); nsp32_msg 2814 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "abort"); nsp32_msg 2885 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "Host Reset"); nsp32_msg 2918 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret); nsp32_msg 2923 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret); nsp32_msg 2940 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, "Unknown EEPROM"); nsp32_msg 3018 drivers/scsi/nsp32.c nsp32_msg(KERN_WARNING, nsp32_msg 3207 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "return value is not appropriate"); nsp32_msg 3281 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host); nsp32_msg 3297 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host); nsp32_msg 3305 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg); nsp32_msg 3308 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "missing device. abort resume."); nsp32_msg 3315 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "resume success"); nsp32_msg 3334 drivers/scsi/nsp32.c nsp32_msg(KERN_ERR, "failed to enable pci device"); nsp32_msg 3350 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s", nsp32_msg 3389 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "loading..."); nsp32_msg 3394 drivers/scsi/nsp32.c nsp32_msg(KERN_INFO, "unloading...");