TEST: index=1, RandomMaxBlocks=1048576, DoDirectRW=Y
COMMAND: /home/furuta/work/ssdtest_1.01/ssdstress -f 93g -pn -xb -rn -my -b 512 -i 1 -a 1048576 -n 2048 -u 524288 -dn -dY -s 1001 /mnt/sdd1/work/dcb723fb-2305-4088-b424-a9f9c96701c7.bin
TestScript: /home/furuta/work/ssdtest_1.01/ssdtest.sh
RunLevel: N 5
uname: Linux fieldfox 3.4.11-local.fc14 #1 SMP Sat Sep 29 15:32:33 JST 2012 x86_64 x86_64 x86_64 GNU/Linux
swapon:
Filename				Type		Size	Used	Priority
/dev/sda2                               partition	10485756	156844	-1
mount:
/dev/sda3 on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sda1 on /boot type ext3 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
blackflat:/home2/furuta on /mnt/blackflat/home2/furuta type nfs (rw,bg,soft,vers=4,addr=192.168.0.160,clientaddr=192.168.0.67)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
gvfs-fuse-daemon on /home/furuta/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=furuta)
/dev/sdd1 on /mnt/sdd1 type ext4 (rw,discard)
fdisk:

Disk /dev/sdd: 120.0 GB, 120034123776 bytes
81 heads, 63 sectors/track, 45941 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xea0fbd4a

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1            8192   234441647   117216728   83  Linux
hdparm:

/dev/sdd:

 Model=OCZ-AGILITY3, FwRev=2.22, SerialNo=OCZ-3A45B6APSW7237S9
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
 AdvancedPM=yes: unknown setting WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-2,3,4,5,6,7

 * signifies the current active mode

smartctl:
smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net