1/* 2 * core_intr.c - DesignWare HS OTG Controller common interrupt handling 3 * 4 * Copyright (C) 2004-2013 Synopsys, Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The names of the above-listed copyright holders may not be used 16 * to endorse or promote products derived from this software without 17 * specific prior written permission. 18 * 19 * ALTERNATIVELY, this software may be distributed under the terms of the 20 * GNU General Public License ("GPL") as published by the Free Software 21 * Foundation; either version 2 of the License, or (at your option) any 22 * later version. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 25 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 26 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 27 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 28 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 29 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 30 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 31 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 32 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 33 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37/* 38 * This file contains the common interrupt handlers 39 */ 40#include <linux/kernel.h> 41#include <linux/module.h> 42#include <linux/moduleparam.h> 43#include <linux/spinlock.h> 44#include <linux/interrupt.h> 45#include <linux/dma-mapping.h> 46#include <linux/io.h> 47#include <linux/slab.h> 48#include <linux/usb.h> 49 50#include <linux/usb/hcd.h> 51#include <linux/usb/ch11.h> 52 53#include "core.h" 54#include "hcd.h" 55 56static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) 57{ 58 switch (hsotg->op_state) { 59 case OTG_STATE_A_HOST: 60 return "a_host"; 61 case OTG_STATE_A_SUSPEND: 62 return "a_suspend"; 63 case OTG_STATE_A_PERIPHERAL: 64 return "a_peripheral"; 65 case OTG_STATE_B_PERIPHERAL: 66 return "b_peripheral"; 67 case OTG_STATE_B_HOST: 68 return "b_host"; 69 default: 70 return "unknown"; 71 } 72} 73 74/** 75 * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. 76 * When the PRTINT interrupt fires, there are certain status bits in the Host 77 * Port that needs to get cleared. 78 * 79 * @hsotg: Programming view of DWC_otg controller 80 */ 81static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) 82{ 83 u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0); 84 85 if (hprt0 & HPRT0_ENACHG) { 86 hprt0 &= ~HPRT0_ENA; 87 dwc2_writel(hprt0, hsotg->regs + HPRT0); 88 } 89 90 /* Clear interrupt */ 91 dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); 92} 93 94/** 95 * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message 96 * 97 * @hsotg: Programming view of DWC_otg controller 98 */ 99static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) 100{ 101 dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", 102 dwc2_is_host_mode(hsotg) ? "Host" : "Device"); 103 104 /* Clear interrupt */ 105 dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); 106} 107 108/** 109 * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG 110 * Interrupt Register (GOTGINT) to determine what interrupt has occurred. 111 * 112 * @hsotg: Programming view of DWC_otg controller 113 */ 114static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) 115{ 116 u32 gotgint; 117 u32 gotgctl; 118 u32 gintmsk; 119 120 gotgint = dwc2_readl(hsotg->regs + GOTGINT); 121 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 122 dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, 123 dwc2_op_state_str(hsotg)); 124 125 if (gotgint & GOTGINT_SES_END_DET) { 126 dev_dbg(hsotg->dev, 127 " ++OTG Interrupt: Session End Detected++ (%s)\n", 128 dwc2_op_state_str(hsotg)); 129 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 130 131 if (dwc2_is_device_mode(hsotg)) 132 dwc2_hsotg_disconnect(hsotg); 133 134 if (hsotg->op_state == OTG_STATE_B_HOST) { 135 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 136 } else { 137 /* 138 * If not B_HOST and Device HNP still set, HNP did 139 * not succeed! 140 */ 141 if (gotgctl & GOTGCTL_DEVHNPEN) { 142 dev_dbg(hsotg->dev, "Session End Detected\n"); 143 dev_err(hsotg->dev, 144 "Device Not Connected/Responding!\n"); 145 } 146 147 /* 148 * If Session End Detected the B-Cable has been 149 * disconnected 150 */ 151 /* Reset to a clean state */ 152 hsotg->lx_state = DWC2_L0; 153 } 154 155 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 156 gotgctl &= ~GOTGCTL_DEVHNPEN; 157 dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); 158 } 159 160 if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { 161 dev_dbg(hsotg->dev, 162 " ++OTG Interrupt: Session Request Success Status Change++\n"); 163 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 164 if (gotgctl & GOTGCTL_SESREQSCS) { 165 if (hsotg->core_params->phy_type == 166 DWC2_PHY_TYPE_PARAM_FS 167 && hsotg->core_params->i2c_enable > 0) { 168 hsotg->srp_success = 1; 169 } else { 170 /* Clear Session Request */ 171 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 172 gotgctl &= ~GOTGCTL_SESREQ; 173 dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); 174 } 175 } 176 } 177 178 if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { 179 /* 180 * Print statements during the HNP interrupt handling 181 * can cause it to fail 182 */ 183 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 184 /* 185 * WA for 3.00a- HW is not setting cur_mode, even sometimes 186 * this does not help 187 */ 188 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) 189 udelay(100); 190 if (gotgctl & GOTGCTL_HSTNEGSCS) { 191 if (dwc2_is_host_mode(hsotg)) { 192 hsotg->op_state = OTG_STATE_B_HOST; 193 /* 194 * Need to disable SOF interrupt immediately. 195 * When switching from device to host, the PCD 196 * interrupt handler won't handle the interrupt 197 * if host mode is already set. The HCD 198 * interrupt handler won't get called if the 199 * HCD state is HALT. This means that the 200 * interrupt does not get handled and Linux 201 * complains loudly. 202 */ 203 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); 204 gintmsk &= ~GINTSTS_SOF; 205 dwc2_writel(gintmsk, hsotg->regs + GINTMSK); 206 207 /* 208 * Call callback function with spin lock 209 * released 210 */ 211 spin_unlock(&hsotg->lock); 212 213 /* Initialize the Core for Host mode */ 214 dwc2_hcd_start(hsotg); 215 spin_lock(&hsotg->lock); 216 hsotg->op_state = OTG_STATE_B_HOST; 217 } 218 } else { 219 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); 220 gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); 221 dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); 222 dev_dbg(hsotg->dev, "HNP Failed\n"); 223 dev_err(hsotg->dev, 224 "Device Not Connected/Responding\n"); 225 } 226 } 227 228 if (gotgint & GOTGINT_HST_NEG_DET) { 229 /* 230 * The disconnect interrupt is set at the same time as 231 * Host Negotiation Detected. During the mode switch all 232 * interrupts are cleared so the disconnect interrupt 233 * handler will not get executed. 234 */ 235 dev_dbg(hsotg->dev, 236 " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", 237 (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); 238 if (dwc2_is_device_mode(hsotg)) { 239 dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", 240 hsotg->op_state); 241 spin_unlock(&hsotg->lock); 242 dwc2_hcd_disconnect(hsotg); 243 spin_lock(&hsotg->lock); 244 hsotg->op_state = OTG_STATE_A_PERIPHERAL; 245 } else { 246 /* Need to disable SOF interrupt immediately */ 247 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); 248 gintmsk &= ~GINTSTS_SOF; 249 dwc2_writel(gintmsk, hsotg->regs + GINTMSK); 250 spin_unlock(&hsotg->lock); 251 dwc2_hcd_start(hsotg); 252 spin_lock(&hsotg->lock); 253 hsotg->op_state = OTG_STATE_A_HOST; 254 } 255 } 256 257 if (gotgint & GOTGINT_A_DEV_TOUT_CHG) 258 dev_dbg(hsotg->dev, 259 " ++OTG Interrupt: A-Device Timeout Change++\n"); 260 if (gotgint & GOTGINT_DBNCE_DONE) 261 dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); 262 263 /* Clear GOTGINT */ 264 dwc2_writel(gotgint, hsotg->regs + GOTGINT); 265} 266 267/** 268 * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status 269 * Change Interrupt 270 * 271 * @hsotg: Programming view of DWC_otg controller 272 * 273 * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a 274 * Device to Host Mode transition or a Host to Device Mode transition. This only 275 * occurs when the cable is connected/removed from the PHY connector. 276 */ 277static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) 278{ 279 u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); 280 281 /* Need to disable SOF interrupt immediately */ 282 gintmsk &= ~GINTSTS_SOF; 283 dwc2_writel(gintmsk, hsotg->regs + GINTMSK); 284 285 dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", 286 dwc2_is_host_mode(hsotg) ? "Host" : "Device"); 287 288 /* 289 * Need to schedule a work, as there are possible DELAY function calls. 290 * Release lock before scheduling workq as it holds spinlock during 291 * scheduling. 292 */ 293 if (hsotg->wq_otg) { 294 spin_unlock(&hsotg->lock); 295 queue_work(hsotg->wq_otg, &hsotg->wf_otg); 296 spin_lock(&hsotg->lock); 297 } 298 299 /* Clear interrupt */ 300 dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); 301} 302 303/** 304 * dwc2_handle_session_req_intr() - This interrupt indicates that a device is 305 * initiating the Session Request Protocol to request the host to turn on bus 306 * power so a new session can begin 307 * 308 * @hsotg: Programming view of DWC_otg controller 309 * 310 * This handler responds by turning on bus power. If the DWC_otg controller is 311 * in low power mode, this handler brings the controller out of low power mode 312 * before turning on bus power. 313 */ 314static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) 315{ 316 int ret; 317 318 dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", 319 hsotg->lx_state); 320 321 /* Clear interrupt */ 322 dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); 323 324 if (dwc2_is_device_mode(hsotg)) { 325 if (hsotg->lx_state == DWC2_L2) { 326 ret = dwc2_exit_hibernation(hsotg, true); 327 if (ret && (ret != -ENOTSUPP)) 328 dev_err(hsotg->dev, 329 "exit hibernation failed\n"); 330 } 331 332 /* 333 * Report disconnect if there is any previous session 334 * established 335 */ 336 dwc2_hsotg_disconnect(hsotg); 337 } 338} 339 340/* 341 * This interrupt indicates that the DWC_otg controller has detected a 342 * resume or remote wakeup sequence. If the DWC_otg controller is in 343 * low power mode, the handler must brings the controller out of low 344 * power mode. The controller automatically begins resume signaling. 345 * The handler schedules a time to stop resume signaling. 346 */ 347static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) 348{ 349 int ret; 350 dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); 351 dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); 352 353 if (dwc2_is_device_mode(hsotg)) { 354 dev_dbg(hsotg->dev, "DSTS=0x%0x\n", 355 dwc2_readl(hsotg->regs + DSTS)); 356 if (hsotg->lx_state == DWC2_L2) { 357 u32 dctl = dwc2_readl(hsotg->regs + DCTL); 358 359 /* Clear Remote Wakeup Signaling */ 360 dctl &= ~DCTL_RMTWKUPSIG; 361 dwc2_writel(dctl, hsotg->regs + DCTL); 362 ret = dwc2_exit_hibernation(hsotg, true); 363 if (ret && (ret != -ENOTSUPP)) 364 dev_err(hsotg->dev, "exit hibernation failed\n"); 365 366 call_gadget(hsotg, resume); 367 } 368 /* Change to L0 state */ 369 hsotg->lx_state = DWC2_L0; 370 } else { 371 if (hsotg->core_params->hibernation) { 372 dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); 373 return; 374 } 375 if (hsotg->lx_state != DWC2_L1) { 376 u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); 377 378 /* Restart the Phy Clock */ 379 pcgcctl &= ~PCGCTL_STOPPCLK; 380 dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); 381 mod_timer(&hsotg->wkp_timer, 382 jiffies + msecs_to_jiffies(71)); 383 } else { 384 /* Change to L0 state */ 385 hsotg->lx_state = DWC2_L0; 386 } 387 } 388 389 /* Clear interrupt */ 390 dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); 391} 392 393/* 394 * This interrupt indicates that a device has been disconnected from the 395 * root port 396 */ 397static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) 398{ 399 dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", 400 dwc2_is_host_mode(hsotg) ? "Host" : "Device", 401 dwc2_op_state_str(hsotg)); 402 403 if (hsotg->op_state == OTG_STATE_A_HOST) 404 dwc2_hcd_disconnect(hsotg); 405 406 dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); 407} 408 409/* 410 * This interrupt indicates that SUSPEND state has been detected on the USB. 411 * 412 * For HNP the USB Suspend interrupt signals the change from "a_peripheral" 413 * to "a_host". 414 * 415 * When power management is enabled the core will be put in low power mode. 416 */ 417static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) 418{ 419 u32 dsts; 420 int ret; 421 422 dev_dbg(hsotg->dev, "USB SUSPEND\n"); 423 424 if (dwc2_is_device_mode(hsotg)) { 425 /* 426 * Check the Device status register to determine if the Suspend 427 * state is active 428 */ 429 dsts = dwc2_readl(hsotg->regs + DSTS); 430 dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts); 431 dev_dbg(hsotg->dev, 432 "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", 433 !!(dsts & DSTS_SUSPSTS), 434 hsotg->hw_params.power_optimized); 435 if ((dsts & DSTS_SUSPSTS) && hsotg->hw_params.power_optimized) { 436 /* Ignore suspend request before enumeration */ 437 if (!dwc2_is_device_connected(hsotg)) { 438 dev_dbg(hsotg->dev, 439 "ignore suspend request before enumeration\n"); 440 goto clear_int; 441 } 442 443 ret = dwc2_enter_hibernation(hsotg); 444 if (ret) { 445 if (ret != -ENOTSUPP) 446 dev_err(hsotg->dev, 447 "enter hibernation failed\n"); 448 goto skip_power_saving; 449 } 450 451 udelay(100); 452 453 /* Ask phy to be suspended */ 454 if (!IS_ERR_OR_NULL(hsotg->uphy)) 455 usb_phy_set_suspend(hsotg->uphy, true); 456skip_power_saving: 457 /* 458 * Change to L2 (suspend) state before releasing 459 * spinlock 460 */ 461 hsotg->lx_state = DWC2_L2; 462 463 /* Call gadget suspend callback */ 464 call_gadget(hsotg, suspend); 465 } 466 } else { 467 if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { 468 dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); 469 470 /* Change to L2 (suspend) state */ 471 hsotg->lx_state = DWC2_L2; 472 /* Clear the a_peripheral flag, back to a_host */ 473 spin_unlock(&hsotg->lock); 474 dwc2_hcd_start(hsotg); 475 spin_lock(&hsotg->lock); 476 hsotg->op_state = OTG_STATE_A_HOST; 477 } 478 } 479 480clear_int: 481 /* Clear interrupt */ 482 dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); 483} 484 485#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ 486 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ 487 GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ 488 GINTSTS_USBSUSP | GINTSTS_PRTINT) 489 490/* 491 * This function returns the Core Interrupt register 492 */ 493static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) 494{ 495 u32 gintsts; 496 u32 gintmsk; 497 u32 gahbcfg; 498 u32 gintmsk_common = GINTMSK_COMMON; 499 500 gintsts = dwc2_readl(hsotg->regs + GINTSTS); 501 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); 502 gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); 503 504 /* If any common interrupts set */ 505 if (gintsts & gintmsk_common) 506 dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", 507 gintsts, gintmsk); 508 509 if (gahbcfg & GAHBCFG_GLBL_INTR_EN) 510 return gintsts & gintmsk & gintmsk_common; 511 else 512 return 0; 513} 514 515/* 516 * Common interrupt handler 517 * 518 * The common interrupts are those that occur in both Host and Device mode. 519 * This handler handles the following interrupts: 520 * - Mode Mismatch Interrupt 521 * - OTG Interrupt 522 * - Connector ID Status Change Interrupt 523 * - Disconnect Interrupt 524 * - Session Request Interrupt 525 * - Resume / Remote Wakeup Detected Interrupt 526 * - Suspend Interrupt 527 */ 528irqreturn_t dwc2_handle_common_intr(int irq, void *dev) 529{ 530 struct dwc2_hsotg *hsotg = dev; 531 u32 gintsts; 532 irqreturn_t retval = IRQ_NONE; 533 534 spin_lock(&hsotg->lock); 535 536 if (!dwc2_is_controller_alive(hsotg)) { 537 dev_warn(hsotg->dev, "Controller is dead\n"); 538 goto out; 539 } 540 541 gintsts = dwc2_read_common_intr(hsotg); 542 if (gintsts & ~GINTSTS_PRTINT) 543 retval = IRQ_HANDLED; 544 545 if (gintsts & GINTSTS_MODEMIS) 546 dwc2_handle_mode_mismatch_intr(hsotg); 547 if (gintsts & GINTSTS_OTGINT) 548 dwc2_handle_otg_intr(hsotg); 549 if (gintsts & GINTSTS_CONIDSTSCHNG) 550 dwc2_handle_conn_id_status_change_intr(hsotg); 551 if (gintsts & GINTSTS_DISCONNINT) 552 dwc2_handle_disconnect_intr(hsotg); 553 if (gintsts & GINTSTS_SESSREQINT) 554 dwc2_handle_session_req_intr(hsotg); 555 if (gintsts & GINTSTS_WKUPINT) 556 dwc2_handle_wakeup_detected_intr(hsotg); 557 if (gintsts & GINTSTS_USBSUSP) 558 dwc2_handle_usb_suspend_intr(hsotg); 559 560 if (gintsts & GINTSTS_PRTINT) { 561 /* 562 * The port interrupt occurs while in device mode with HPRT0 563 * Port Enable/Disable 564 */ 565 if (dwc2_is_device_mode(hsotg)) { 566 dev_dbg(hsotg->dev, 567 " --Port interrupt received in Device mode--\n"); 568 dwc2_handle_usb_port_intr(hsotg); 569 retval = IRQ_HANDLED; 570 } 571 } 572 573out: 574 spin_unlock(&hsotg->lock); 575 return retval; 576} 577