1/* envctrl.c: Temperature and Fan monitoring on Machines providing it. 2 * 3 * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) 4 * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com) 5 * VT - The implementation is to support Sun Microelectronics (SME) platform 6 * environment monitoring. SME platforms use pcf8584 as the i2c bus 7 * controller to access pcf8591 (8-bit A/D and D/A converter) and 8 * pcf8571 (256 x 8-bit static low-voltage RAM with I2C-bus interface). 9 * At board level, it follows SME Firmware I2C Specification. Reference: 10 * http://www-eu2.semiconductors.com/pip/PCF8584P 11 * http://www-eu2.semiconductors.com/pip/PCF8574AP 12 * http://www-eu2.semiconductors.com/pip/PCF8591P 13 * 14 * EB - Added support for CP1500 Global Address and PS/Voltage monitoring. 15 * Eric Brower <ebrower@usa.net> 16 * 17 * DB - Audit every copy_to_user in envctrl_read. 18 * Daniele Bellucci <bellucda@tiscali.it> 19 */ 20 21#include <linux/module.h> 22#include <linux/kthread.h> 23#include <linux/delay.h> 24#include <linux/ioport.h> 25#include <linux/miscdevice.h> 26#include <linux/kmod.h> 27#include <linux/reboot.h> 28#include <linux/slab.h> 29#include <linux/of.h> 30#include <linux/of_device.h> 31 32#include <asm/uaccess.h> 33#include <asm/envctrl.h> 34#include <asm/io.h> 35 36#define DRIVER_NAME "envctrl" 37#define PFX DRIVER_NAME ": " 38 39#define ENVCTRL_MINOR 162 40 41#define PCF8584_ADDRESS 0x55 42 43#define CONTROL_PIN 0x80 44#define CONTROL_ES0 0x40 45#define CONTROL_ES1 0x20 46#define CONTROL_ES2 0x10 47#define CONTROL_ENI 0x08 48#define CONTROL_STA 0x04 49#define CONTROL_STO 0x02 50#define CONTROL_ACK 0x01 51 52#define STATUS_PIN 0x80 53#define STATUS_STS 0x20 54#define STATUS_BER 0x10 55#define STATUS_LRB 0x08 56#define STATUS_AD0 0x08 57#define STATUS_AAB 0x04 58#define STATUS_LAB 0x02 59#define STATUS_BB 0x01 60 61/* 62 * CLK Mode Register. 63 */ 64#define BUS_CLK_90 0x00 65#define BUS_CLK_45 0x01 66#define BUS_CLK_11 0x02 67#define BUS_CLK_1_5 0x03 68 69#define CLK_3 0x00 70#define CLK_4_43 0x10 71#define CLK_6 0x14 72#define CLK_8 0x18 73#define CLK_12 0x1c 74 75#define OBD_SEND_START 0xc5 /* value to generate I2c_bus START condition */ 76#define OBD_SEND_STOP 0xc3 /* value to generate I2c_bus STOP condition */ 77 78/* Monitor type of i2c child device. 79 * Firmware definitions. 80 */ 81#define PCF8584_MAX_CHANNELS 8 82#define PCF8584_GLOBALADDR_TYPE 6 /* global address monitor */ 83#define PCF8584_FANSTAT_TYPE 3 /* fan status monitor */ 84#define PCF8584_VOLTAGE_TYPE 2 /* voltage monitor */ 85#define PCF8584_TEMP_TYPE 1 /* temperature monitor*/ 86 87/* Monitor type of i2c child device. 88 * Driver definitions. 89 */ 90#define ENVCTRL_NOMON 0 91#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */ 92#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */ 93#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */ 94#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */ 95 /* monitor */ 96#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */ 97#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */ 98#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */ 99#define ENVCTRL_GLOBALADDR_MON 8 /* global address */ 100 101/* Child device type. 102 * Driver definitions. 103 */ 104#define I2C_ADC 0 /* pcf8591 */ 105#define I2C_GPIO 1 /* pcf8571 */ 106 107/* Data read from child device may need to decode 108 * through a data table and a scale. 109 * Translation type as defined by firmware. 110 */ 111#define ENVCTRL_TRANSLATE_NO 0 112#define ENVCTRL_TRANSLATE_PARTIAL 1 113#define ENVCTRL_TRANSLATE_COMBINED 2 114#define ENVCTRL_TRANSLATE_FULL 3 /* table[data] */ 115#define ENVCTRL_TRANSLATE_SCALE 4 /* table[data]/scale */ 116 117/* Driver miscellaneous definitions. */ 118#define ENVCTRL_MAX_CPU 4 119#define CHANNEL_DESC_SZ 256 120 121/* Mask values for combined GlobalAddress/PowerStatus node */ 122#define ENVCTRL_GLOBALADDR_ADDR_MASK 0x1F 123#define ENVCTRL_GLOBALADDR_PSTAT_MASK 0x60 124 125/* Node 0x70 ignored on CompactPCI CP1400/1500 platforms 126 * (see envctrl_init_i2c_child) 127 */ 128#define ENVCTRL_CPCI_IGNORED_NODE 0x70 129 130#define PCF8584_DATA 0x00 131#define PCF8584_CSR 0x01 132 133/* Each child device can be monitored by up to PCF8584_MAX_CHANNELS. 134 * Property of a port or channel as defined by the firmware. 135 */ 136struct pcf8584_channel { 137 unsigned char chnl_no; 138 unsigned char io_direction; 139 unsigned char type; 140 unsigned char last; 141}; 142 143/* Each child device may have one or more tables of bytes to help decode 144 * data. Table property as defined by the firmware. 145 */ 146struct pcf8584_tblprop { 147 unsigned int type; 148 unsigned int scale; 149 unsigned int offset; /* offset from the beginning of the table */ 150 unsigned int size; 151}; 152 153/* i2c child */ 154struct i2c_child_t { 155 /* Either ADC or GPIO. */ 156 unsigned char i2ctype; 157 unsigned long addr; 158 struct pcf8584_channel chnl_array[PCF8584_MAX_CHANNELS]; 159 160 /* Channel info. */ 161 unsigned int total_chnls; /* Number of monitor channels. */ 162 unsigned char fan_mask; /* Byte mask for fan status channels. */ 163 unsigned char voltage_mask; /* Byte mask for voltage status channels. */ 164 struct pcf8584_tblprop tblprop_array[PCF8584_MAX_CHANNELS]; 165 166 /* Properties of all monitor channels. */ 167 unsigned int total_tbls; /* Number of monitor tables. */ 168 char *tables; /* Pointer to table(s). */ 169 char chnls_desc[CHANNEL_DESC_SZ]; /* Channel description. */ 170 char mon_type[PCF8584_MAX_CHANNELS]; 171}; 172 173static void __iomem *i2c; 174static struct i2c_child_t i2c_childlist[ENVCTRL_MAX_CPU*2]; 175static unsigned char chnls_mask[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; 176static unsigned int warning_temperature = 0; 177static unsigned int shutdown_temperature = 0; 178static char read_cpu; 179 180/* Forward declarations. */ 181static struct i2c_child_t *envctrl_get_i2c_child(unsigned char); 182 183/* Function Description: Test the PIN bit (Pending Interrupt Not) 184 * to test when serial transmission is completed . 185 * Return : None. 186 */ 187static void envtrl_i2c_test_pin(void) 188{ 189 int limit = 1000000; 190 191 while (--limit > 0) { 192 if (!(readb(i2c + PCF8584_CSR) & STATUS_PIN)) 193 break; 194 udelay(1); 195 } 196 197 if (limit <= 0) 198 printk(KERN_INFO PFX "Pin status will not clear.\n"); 199} 200 201/* Function Description: Test busy bit. 202 * Return : None. 203 */ 204static void envctrl_i2c_test_bb(void) 205{ 206 int limit = 1000000; 207 208 while (--limit > 0) { 209 /* Busy bit 0 means busy. */ 210 if (readb(i2c + PCF8584_CSR) & STATUS_BB) 211 break; 212 udelay(1); 213 } 214 215 if (limit <= 0) 216 printk(KERN_INFO PFX "Busy bit will not clear.\n"); 217} 218 219/* Function Description: Send the address for a read access. 220 * Return : 0 if not acknowledged, otherwise acknowledged. 221 */ 222static int envctrl_i2c_read_addr(unsigned char addr) 223{ 224 envctrl_i2c_test_bb(); 225 226 /* Load address. */ 227 writeb(addr + 1, i2c + PCF8584_DATA); 228 229 envctrl_i2c_test_bb(); 230 231 writeb(OBD_SEND_START, i2c + PCF8584_CSR); 232 233 /* Wait for PIN. */ 234 envtrl_i2c_test_pin(); 235 236 /* CSR 0 means acknowledged. */ 237 if (!(readb(i2c + PCF8584_CSR) & STATUS_LRB)) { 238 return readb(i2c + PCF8584_DATA); 239 } else { 240 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR); 241 return 0; 242 } 243} 244 245/* Function Description: Send the address for write mode. 246 * Return : None. 247 */ 248static void envctrl_i2c_write_addr(unsigned char addr) 249{ 250 envctrl_i2c_test_bb(); 251 writeb(addr, i2c + PCF8584_DATA); 252 253 /* Generate Start condition. */ 254 writeb(OBD_SEND_START, i2c + PCF8584_CSR); 255} 256 257/* Function Description: Read 1 byte of data from addr 258 * set by envctrl_i2c_read_addr() 259 * Return : Data from address set by envctrl_i2c_read_addr(). 260 */ 261static unsigned char envctrl_i2c_read_data(void) 262{ 263 envtrl_i2c_test_pin(); 264 writeb(CONTROL_ES0, i2c + PCF8584_CSR); /* Send neg ack. */ 265 return readb(i2c + PCF8584_DATA); 266} 267 268/* Function Description: Instruct the device which port to read data from. 269 * Return : None. 270 */ 271static void envctrl_i2c_write_data(unsigned char port) 272{ 273 envtrl_i2c_test_pin(); 274 writeb(port, i2c + PCF8584_DATA); 275} 276 277/* Function Description: Generate Stop condition after last byte is sent. 278 * Return : None. 279 */ 280static void envctrl_i2c_stop(void) 281{ 282 envtrl_i2c_test_pin(); 283 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR); 284} 285 286/* Function Description: Read adc device. 287 * Return : Data at address and port. 288 */ 289static unsigned char envctrl_i2c_read_8591(unsigned char addr, unsigned char port) 290{ 291 /* Send address. */ 292 envctrl_i2c_write_addr(addr); 293 294 /* Setup port to read. */ 295 envctrl_i2c_write_data(port); 296 envctrl_i2c_stop(); 297 298 /* Read port. */ 299 envctrl_i2c_read_addr(addr); 300 301 /* Do a single byte read and send stop. */ 302 envctrl_i2c_read_data(); 303 envctrl_i2c_stop(); 304 305 return readb(i2c + PCF8584_DATA); 306} 307 308/* Function Description: Read gpio device. 309 * Return : Data at address. 310 */ 311static unsigned char envctrl_i2c_read_8574(unsigned char addr) 312{ 313 unsigned char rd; 314 315 envctrl_i2c_read_addr(addr); 316 317 /* Do a single byte read and send stop. */ 318 rd = envctrl_i2c_read_data(); 319 envctrl_i2c_stop(); 320 return rd; 321} 322 323/* Function Description: Decode data read from an adc device using firmware 324 * table. 325 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 326 */ 327static int envctrl_i2c_data_translate(unsigned char data, int translate_type, 328 int scale, char *tbl, char *bufdata) 329{ 330 int len = 0; 331 332 switch (translate_type) { 333 case ENVCTRL_TRANSLATE_NO: 334 /* No decode necessary. */ 335 len = 1; 336 bufdata[0] = data; 337 break; 338 339 case ENVCTRL_TRANSLATE_FULL: 340 /* Decode this way: data = table[data]. */ 341 len = 1; 342 bufdata[0] = tbl[data]; 343 break; 344 345 case ENVCTRL_TRANSLATE_SCALE: 346 /* Decode this way: data = table[data]/scale */ 347 sprintf(bufdata,"%d ", (tbl[data] * 10) / (scale)); 348 len = strlen(bufdata); 349 bufdata[len - 1] = bufdata[len - 2]; 350 bufdata[len - 2] = '.'; 351 break; 352 353 default: 354 break; 355 } 356 357 return len; 358} 359 360/* Function Description: Read cpu-related data such as cpu temperature, voltage. 361 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 362 */ 363static int envctrl_read_cpu_info(int cpu, struct i2c_child_t *pchild, 364 char mon_type, unsigned char *bufdata) 365{ 366 unsigned char data; 367 int i; 368 char *tbl, j = -1; 369 370 /* Find the right monitor type and channel. */ 371 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 372 if (pchild->mon_type[i] == mon_type) { 373 if (++j == cpu) { 374 break; 375 } 376 } 377 } 378 379 if (j != cpu) 380 return 0; 381 382 /* Read data from address and port. */ 383 data = envctrl_i2c_read_8591((unsigned char)pchild->addr, 384 (unsigned char)pchild->chnl_array[i].chnl_no); 385 386 /* Find decoding table. */ 387 tbl = pchild->tables + pchild->tblprop_array[i].offset; 388 389 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type, 390 pchild->tblprop_array[i].scale, 391 tbl, bufdata); 392} 393 394/* Function Description: Read noncpu-related data such as motherboard 395 * temperature. 396 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 397 */ 398static int envctrl_read_noncpu_info(struct i2c_child_t *pchild, 399 char mon_type, unsigned char *bufdata) 400{ 401 unsigned char data; 402 int i; 403 char *tbl = NULL; 404 405 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 406 if (pchild->mon_type[i] == mon_type) 407 break; 408 } 409 410 if (i >= PCF8584_MAX_CHANNELS) 411 return 0; 412 413 /* Read data from address and port. */ 414 data = envctrl_i2c_read_8591((unsigned char)pchild->addr, 415 (unsigned char)pchild->chnl_array[i].chnl_no); 416 417 /* Find decoding table. */ 418 tbl = pchild->tables + pchild->tblprop_array[i].offset; 419 420 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type, 421 pchild->tblprop_array[i].scale, 422 tbl, bufdata); 423} 424 425/* Function Description: Read fan status. 426 * Return : Always 1 byte. Status stored in bufdata. 427 */ 428static int envctrl_i2c_fan_status(struct i2c_child_t *pchild, 429 unsigned char data, 430 char *bufdata) 431{ 432 unsigned char tmp, ret = 0; 433 int i, j = 0; 434 435 tmp = data & pchild->fan_mask; 436 437 if (tmp == pchild->fan_mask) { 438 /* All bits are on. All fans are functioning. */ 439 ret = ENVCTRL_ALL_FANS_GOOD; 440 } else if (tmp == 0) { 441 /* No bits are on. No fans are functioning. */ 442 ret = ENVCTRL_ALL_FANS_BAD; 443 } else { 444 /* Go through all channels, mark 'on' the matched bits. 445 * Notice that fan_mask may have discontiguous bits but 446 * return mask are always contiguous. For example if we 447 * monitor 4 fans at channels 0,1,2,4, the return mask 448 * should be 00010000 if only fan at channel 4 is working. 449 */ 450 for (i = 0; i < PCF8584_MAX_CHANNELS;i++) { 451 if (pchild->fan_mask & chnls_mask[i]) { 452 if (!(chnls_mask[i] & tmp)) 453 ret |= chnls_mask[j]; 454 455 j++; 456 } 457 } 458 } 459 460 bufdata[0] = ret; 461 return 1; 462} 463 464/* Function Description: Read global addressing line. 465 * Return : Always 1 byte. Status stored in bufdata. 466 */ 467static int envctrl_i2c_globaladdr(struct i2c_child_t *pchild, 468 unsigned char data, 469 char *bufdata) 470{ 471 /* Translatation table is not necessary, as global 472 * addr is the integer value of the GA# bits. 473 * 474 * NOTE: MSB is documented as zero, but I see it as '1' always.... 475 * 476 * ----------------------------------------------- 477 * | 0 | FAL | DEG | GA4 | GA3 | GA2 | GA1 | GA0 | 478 * ----------------------------------------------- 479 * GA0 - GA4 integer value of Global Address (backplane slot#) 480 * DEG 0 = cPCI Power supply output is starting to degrade 481 * 1 = cPCI Power supply output is OK 482 * FAL 0 = cPCI Power supply has failed 483 * 1 = cPCI Power supply output is OK 484 */ 485 bufdata[0] = (data & ENVCTRL_GLOBALADDR_ADDR_MASK); 486 return 1; 487} 488 489/* Function Description: Read standard voltage and power supply status. 490 * Return : Always 1 byte. Status stored in bufdata. 491 */ 492static unsigned char envctrl_i2c_voltage_status(struct i2c_child_t *pchild, 493 unsigned char data, 494 char *bufdata) 495{ 496 unsigned char tmp, ret = 0; 497 int i, j = 0; 498 499 tmp = data & pchild->voltage_mask; 500 501 /* Two channels are used to monitor voltage and power supply. */ 502 if (tmp == pchild->voltage_mask) { 503 /* All bits are on. Voltage and power supply are okay. */ 504 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD; 505 } else if (tmp == 0) { 506 /* All bits are off. Voltage and power supply are bad */ 507 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_BAD; 508 } else { 509 /* Either voltage or power supply has problem. */ 510 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 511 if (pchild->voltage_mask & chnls_mask[i]) { 512 j++; 513 514 /* Break out when there is a mismatch. */ 515 if (!(chnls_mask[i] & tmp)) 516 break; 517 } 518 } 519 520 /* Make a wish that hardware will always use the 521 * first channel for voltage and the second for 522 * power supply. 523 */ 524 if (j == 1) 525 ret = ENVCTRL_VOLTAGE_BAD; 526 else 527 ret = ENVCTRL_POWERSUPPLY_BAD; 528 } 529 530 bufdata[0] = ret; 531 return 1; 532} 533 534/* Function Description: Read a byte from /dev/envctrl. Mapped to user read(). 535 * Return: Number of read bytes. 0 for error. 536 */ 537static ssize_t 538envctrl_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) 539{ 540 struct i2c_child_t *pchild; 541 unsigned char data[10]; 542 int ret = 0; 543 544 /* Get the type of read as decided in ioctl() call. 545 * Find the appropriate i2c child. 546 * Get the data and put back to the user buffer. 547 */ 548 549 switch ((int)(long)file->private_data) { 550 case ENVCTRL_RD_WARNING_TEMPERATURE: 551 if (warning_temperature == 0) 552 return 0; 553 554 data[0] = (unsigned char)(warning_temperature); 555 ret = 1; 556 if (copy_to_user(buf, data, ret)) 557 ret = -EFAULT; 558 break; 559 560 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE: 561 if (shutdown_temperature == 0) 562 return 0; 563 564 data[0] = (unsigned char)(shutdown_temperature); 565 ret = 1; 566 if (copy_to_user(buf, data, ret)) 567 ret = -EFAULT; 568 break; 569 570 case ENVCTRL_RD_MTHRBD_TEMPERATURE: 571 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_MTHRBDTEMP_MON))) 572 return 0; 573 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_MTHRBDTEMP_MON, data); 574 if (copy_to_user(buf, data, ret)) 575 ret = -EFAULT; 576 break; 577 578 case ENVCTRL_RD_CPU_TEMPERATURE: 579 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) 580 return 0; 581 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUTEMP_MON, data); 582 583 /* Reset cpu to the default cpu0. */ 584 if (copy_to_user(buf, data, ret)) 585 ret = -EFAULT; 586 break; 587 588 case ENVCTRL_RD_CPU_VOLTAGE: 589 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUVOLTAGE_MON))) 590 return 0; 591 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUVOLTAGE_MON, data); 592 593 /* Reset cpu to the default cpu0. */ 594 if (copy_to_user(buf, data, ret)) 595 ret = -EFAULT; 596 break; 597 598 case ENVCTRL_RD_SCSI_TEMPERATURE: 599 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_SCSITEMP_MON))) 600 return 0; 601 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_SCSITEMP_MON, data); 602 if (copy_to_user(buf, data, ret)) 603 ret = -EFAULT; 604 break; 605 606 case ENVCTRL_RD_ETHERNET_TEMPERATURE: 607 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_ETHERTEMP_MON))) 608 return 0; 609 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_ETHERTEMP_MON, data); 610 if (copy_to_user(buf, data, ret)) 611 ret = -EFAULT; 612 break; 613 614 case ENVCTRL_RD_FAN_STATUS: 615 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_FANSTAT_MON))) 616 return 0; 617 data[0] = envctrl_i2c_read_8574(pchild->addr); 618 ret = envctrl_i2c_fan_status(pchild,data[0], data); 619 if (copy_to_user(buf, data, ret)) 620 ret = -EFAULT; 621 break; 622 623 case ENVCTRL_RD_GLOBALADDRESS: 624 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON))) 625 return 0; 626 data[0] = envctrl_i2c_read_8574(pchild->addr); 627 ret = envctrl_i2c_globaladdr(pchild, data[0], data); 628 if (copy_to_user(buf, data, ret)) 629 ret = -EFAULT; 630 break; 631 632 case ENVCTRL_RD_VOLTAGE_STATUS: 633 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_VOLTAGESTAT_MON))) 634 /* If voltage monitor not present, check for CPCI equivalent */ 635 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON))) 636 return 0; 637 data[0] = envctrl_i2c_read_8574(pchild->addr); 638 ret = envctrl_i2c_voltage_status(pchild, data[0], data); 639 if (copy_to_user(buf, data, ret)) 640 ret = -EFAULT; 641 break; 642 643 default: 644 break; 645 646 } 647 648 return ret; 649} 650 651/* Function Description: Command what to read. Mapped to user ioctl(). 652 * Return: Gives 0 for implemented commands, -EINVAL otherwise. 653 */ 654static long 655envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 656{ 657 char __user *infobuf; 658 659 switch (cmd) { 660 case ENVCTRL_RD_WARNING_TEMPERATURE: 661 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE: 662 case ENVCTRL_RD_MTHRBD_TEMPERATURE: 663 case ENVCTRL_RD_FAN_STATUS: 664 case ENVCTRL_RD_VOLTAGE_STATUS: 665 case ENVCTRL_RD_ETHERNET_TEMPERATURE: 666 case ENVCTRL_RD_SCSI_TEMPERATURE: 667 case ENVCTRL_RD_GLOBALADDRESS: 668 file->private_data = (void *)(long)cmd; 669 break; 670 671 case ENVCTRL_RD_CPU_TEMPERATURE: 672 case ENVCTRL_RD_CPU_VOLTAGE: 673 /* Check to see if application passes in any cpu number, 674 * the default is cpu0. 675 */ 676 infobuf = (char __user *) arg; 677 if (infobuf == NULL) { 678 read_cpu = 0; 679 }else { 680 get_user(read_cpu, infobuf); 681 } 682 683 /* Save the command for use when reading. */ 684 file->private_data = (void *)(long)cmd; 685 break; 686 687 default: 688 return -EINVAL; 689 } 690 691 return 0; 692} 693 694/* Function Description: open device. Mapped to user open(). 695 * Return: Always 0. 696 */ 697static int 698envctrl_open(struct inode *inode, struct file *file) 699{ 700 file->private_data = NULL; 701 return 0; 702} 703 704/* Function Description: Open device. Mapped to user close(). 705 * Return: Always 0. 706 */ 707static int 708envctrl_release(struct inode *inode, struct file *file) 709{ 710 return 0; 711} 712 713static const struct file_operations envctrl_fops = { 714 .owner = THIS_MODULE, 715 .read = envctrl_read, 716 .unlocked_ioctl = envctrl_ioctl, 717#ifdef CONFIG_COMPAT 718 .compat_ioctl = envctrl_ioctl, 719#endif 720 .open = envctrl_open, 721 .release = envctrl_release, 722 .llseek = noop_llseek, 723}; 724 725static struct miscdevice envctrl_dev = { 726 ENVCTRL_MINOR, 727 "envctrl", 728 &envctrl_fops 729}; 730 731/* Function Description: Set monitor type based on firmware description. 732 * Return: None. 733 */ 734static void envctrl_set_mon(struct i2c_child_t *pchild, 735 const char *chnl_desc, 736 int chnl_no) 737{ 738 /* Firmware only has temperature type. It does not distinguish 739 * different kinds of temperatures. We use channel description 740 * to disinguish them. 741 */ 742 if (!(strcmp(chnl_desc,"temp,cpu")) || 743 !(strcmp(chnl_desc,"temp,cpu0")) || 744 !(strcmp(chnl_desc,"temp,cpu1")) || 745 !(strcmp(chnl_desc,"temp,cpu2")) || 746 !(strcmp(chnl_desc,"temp,cpu3"))) 747 pchild->mon_type[chnl_no] = ENVCTRL_CPUTEMP_MON; 748 749 if (!(strcmp(chnl_desc,"vddcore,cpu0")) || 750 !(strcmp(chnl_desc,"vddcore,cpu1")) || 751 !(strcmp(chnl_desc,"vddcore,cpu2")) || 752 !(strcmp(chnl_desc,"vddcore,cpu3"))) 753 pchild->mon_type[chnl_no] = ENVCTRL_CPUVOLTAGE_MON; 754 755 if (!(strcmp(chnl_desc,"temp,motherboard"))) 756 pchild->mon_type[chnl_no] = ENVCTRL_MTHRBDTEMP_MON; 757 758 if (!(strcmp(chnl_desc,"temp,scsi"))) 759 pchild->mon_type[chnl_no] = ENVCTRL_SCSITEMP_MON; 760 761 if (!(strcmp(chnl_desc,"temp,ethernet"))) 762 pchild->mon_type[chnl_no] = ENVCTRL_ETHERTEMP_MON; 763} 764 765/* Function Description: Initialize monitor channel with channel desc, 766 * decoding tables, monitor type, optional properties. 767 * Return: None. 768 */ 769static void envctrl_init_adc(struct i2c_child_t *pchild, struct device_node *dp) 770{ 771 int i = 0, len; 772 const char *pos; 773 const unsigned int *pval; 774 775 /* Firmware describe channels into a stream separated by a '\0'. */ 776 pos = of_get_property(dp, "channels-description", &len); 777 778 while (len > 0) { 779 int l = strlen(pos) + 1; 780 envctrl_set_mon(pchild, pos, i++); 781 len -= l; 782 pos += l; 783 } 784 785 /* Get optional properties. */ 786 pval = of_get_property(dp, "warning-temp", NULL); 787 if (pval) 788 warning_temperature = *pval; 789 790 pval = of_get_property(dp, "shutdown-temp", NULL); 791 if (pval) 792 shutdown_temperature = *pval; 793} 794 795/* Function Description: Initialize child device monitoring fan status. 796 * Return: None. 797 */ 798static void envctrl_init_fanstat(struct i2c_child_t *pchild) 799{ 800 int i; 801 802 /* Go through all channels and set up the mask. */ 803 for (i = 0; i < pchild->total_chnls; i++) 804 pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no]; 805 806 /* We only need to know if this child has fan status monitored. 807 * We don't care which channels since we have the mask already. 808 */ 809 pchild->mon_type[0] = ENVCTRL_FANSTAT_MON; 810} 811 812/* Function Description: Initialize child device for global addressing line. 813 * Return: None. 814 */ 815static void envctrl_init_globaladdr(struct i2c_child_t *pchild) 816{ 817 int i; 818 819 /* Voltage/PowerSupply monitoring is piggybacked 820 * with Global Address on CompactPCI. See comments 821 * within envctrl_i2c_globaladdr for bit assignments. 822 * 823 * The mask is created here by assigning mask bits to each 824 * bit position that represents PCF8584_VOLTAGE_TYPE data. 825 * Channel numbers are not consecutive within the globaladdr 826 * node (why?), so we use the actual counter value as chnls_mask 827 * index instead of the chnl_array[x].chnl_no value. 828 * 829 * NOTE: This loop could be replaced with a constant representing 830 * a mask of bits 5&6 (ENVCTRL_GLOBALADDR_PSTAT_MASK). 831 */ 832 for (i = 0; i < pchild->total_chnls; i++) { 833 if (PCF8584_VOLTAGE_TYPE == pchild->chnl_array[i].type) { 834 pchild->voltage_mask |= chnls_mask[i]; 835 } 836 } 837 838 /* We only need to know if this child has global addressing 839 * line monitored. We don't care which channels since we know 840 * the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK). 841 */ 842 pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON; 843} 844 845/* Initialize child device monitoring voltage status. */ 846static void envctrl_init_voltage_status(struct i2c_child_t *pchild) 847{ 848 int i; 849 850 /* Go through all channels and set up the mask. */ 851 for (i = 0; i < pchild->total_chnls; i++) 852 pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no]; 853 854 /* We only need to know if this child has voltage status monitored. 855 * We don't care which channels since we have the mask already. 856 */ 857 pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON; 858} 859 860/* Function Description: Initialize i2c child device. 861 * Return: None. 862 */ 863static void envctrl_init_i2c_child(struct device_node *dp, 864 struct i2c_child_t *pchild) 865{ 866 int len, i, tbls_size = 0; 867 const void *pval; 868 869 /* Get device address. */ 870 pval = of_get_property(dp, "reg", &len); 871 memcpy(&pchild->addr, pval, len); 872 873 /* Get tables property. Read firmware temperature tables. */ 874 pval = of_get_property(dp, "translation", &len); 875 if (pval && len > 0) { 876 memcpy(pchild->tblprop_array, pval, len); 877 pchild->total_tbls = len / sizeof(struct pcf8584_tblprop); 878 for (i = 0; i < pchild->total_tbls; i++) { 879 if ((pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset) > tbls_size) { 880 tbls_size = pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset; 881 } 882 } 883 884 pchild->tables = kmalloc(tbls_size, GFP_KERNEL); 885 if (pchild->tables == NULL){ 886 printk(KERN_ERR PFX "Failed to allocate table.\n"); 887 return; 888 } 889 pval = of_get_property(dp, "tables", &len); 890 if (!pval || len <= 0) { 891 printk(KERN_ERR PFX "Failed to get table.\n"); 892 return; 893 } 894 memcpy(pchild->tables, pval, len); 895 } 896 897 /* SPARCengine ASM Reference Manual (ref. SMI doc 805-7581-04) 898 * sections 2.5, 3.5, 4.5 state node 0x70 for CP1400/1500 is 899 * "For Factory Use Only." 900 * 901 * We ignore the node on these platforms by assigning the 902 * 'NULL' monitor type. 903 */ 904 if (ENVCTRL_CPCI_IGNORED_NODE == pchild->addr) { 905 struct device_node *root_node; 906 int len; 907 908 root_node = of_find_node_by_path("/"); 909 if (!strcmp(root_node->name, "SUNW,UltraSPARC-IIi-cEngine")) { 910 for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) { 911 pchild->mon_type[len] = ENVCTRL_NOMON; 912 } 913 return; 914 } 915 } 916 917 /* Get the monitor channels. */ 918 pval = of_get_property(dp, "channels-in-use", &len); 919 memcpy(pchild->chnl_array, pval, len); 920 pchild->total_chnls = len / sizeof(struct pcf8584_channel); 921 922 for (i = 0; i < pchild->total_chnls; i++) { 923 switch (pchild->chnl_array[i].type) { 924 case PCF8584_TEMP_TYPE: 925 envctrl_init_adc(pchild, dp); 926 break; 927 928 case PCF8584_GLOBALADDR_TYPE: 929 envctrl_init_globaladdr(pchild); 930 i = pchild->total_chnls; 931 break; 932 933 case PCF8584_FANSTAT_TYPE: 934 envctrl_init_fanstat(pchild); 935 i = pchild->total_chnls; 936 break; 937 938 case PCF8584_VOLTAGE_TYPE: 939 if (pchild->i2ctype == I2C_ADC) { 940 envctrl_init_adc(pchild,dp); 941 } else { 942 envctrl_init_voltage_status(pchild); 943 } 944 i = pchild->total_chnls; 945 break; 946 947 default: 948 break; 949 } 950 } 951} 952 953/* Function Description: Search the child device list for a device. 954 * Return : The i2c child if found. NULL otherwise. 955 */ 956static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type) 957{ 958 int i, j; 959 960 for (i = 0; i < ENVCTRL_MAX_CPU*2; i++) { 961 for (j = 0; j < PCF8584_MAX_CHANNELS; j++) { 962 if (i2c_childlist[i].mon_type[j] == mon_type) { 963 return (struct i2c_child_t *)(&(i2c_childlist[i])); 964 } 965 } 966 } 967 return NULL; 968} 969 970static void envctrl_do_shutdown(void) 971{ 972 static int inprog = 0; 973 974 if (inprog != 0) 975 return; 976 977 inprog = 1; 978 printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n"); 979 orderly_poweroff(true); 980} 981 982static struct task_struct *kenvctrld_task; 983 984static int kenvctrld(void *__unused) 985{ 986 int poll_interval; 987 int whichcpu; 988 char tempbuf[10]; 989 struct i2c_child_t *cputemp; 990 991 if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) { 992 printk(KERN_ERR PFX 993 "kenvctrld unable to monitor CPU temp-- exiting\n"); 994 return -ENODEV; 995 } 996 997 poll_interval = 5000; /* TODO env_mon_interval */ 998 999 printk(KERN_INFO PFX "%s starting...\n", current->comm); 1000 for (;;) { 1001 msleep_interruptible(poll_interval); 1002 1003 if (kthread_should_stop()) 1004 break; 1005 1006 for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) { 1007 if (0 < envctrl_read_cpu_info(whichcpu, cputemp, 1008 ENVCTRL_CPUTEMP_MON, 1009 tempbuf)) { 1010 if (tempbuf[0] >= shutdown_temperature) { 1011 printk(KERN_CRIT 1012 "%s: WARNING: CPU%i temperature %i C meets or exceeds "\ 1013 "shutdown threshold %i C\n", 1014 current->comm, whichcpu, 1015 tempbuf[0], shutdown_temperature); 1016 envctrl_do_shutdown(); 1017 } 1018 } 1019 } 1020 } 1021 printk(KERN_INFO PFX "%s exiting...\n", current->comm); 1022 return 0; 1023} 1024 1025static int envctrl_probe(struct platform_device *op) 1026{ 1027 struct device_node *dp; 1028 int index, err; 1029 1030 if (i2c) 1031 return -EINVAL; 1032 1033 i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME); 1034 if (!i2c) 1035 return -ENOMEM; 1036 1037 index = 0; 1038 dp = op->dev.of_node->child; 1039 while (dp) { 1040 if (!strcmp(dp->name, "gpio")) { 1041 i2c_childlist[index].i2ctype = I2C_GPIO; 1042 envctrl_init_i2c_child(dp, &(i2c_childlist[index++])); 1043 } else if (!strcmp(dp->name, "adc")) { 1044 i2c_childlist[index].i2ctype = I2C_ADC; 1045 envctrl_init_i2c_child(dp, &(i2c_childlist[index++])); 1046 } 1047 1048 dp = dp->sibling; 1049 } 1050 1051 /* Set device address. */ 1052 writeb(CONTROL_PIN, i2c + PCF8584_CSR); 1053 writeb(PCF8584_ADDRESS, i2c + PCF8584_DATA); 1054 1055 /* Set system clock and SCL frequencies. */ 1056 writeb(CONTROL_PIN | CONTROL_ES1, i2c + PCF8584_CSR); 1057 writeb(CLK_4_43 | BUS_CLK_90, i2c + PCF8584_DATA); 1058 1059 /* Enable serial interface. */ 1060 writeb(CONTROL_PIN | CONTROL_ES0 | CONTROL_ACK, i2c + PCF8584_CSR); 1061 udelay(200); 1062 1063 /* Register the device as a minor miscellaneous device. */ 1064 err = misc_register(&envctrl_dev); 1065 if (err) { 1066 printk(KERN_ERR PFX "Unable to get misc minor %d\n", 1067 envctrl_dev.minor); 1068 goto out_iounmap; 1069 } 1070 1071 /* Note above traversal routine post-incremented 'i' to accommodate 1072 * a next child device, so we decrement before reverse-traversal of 1073 * child devices. 1074 */ 1075 printk(KERN_INFO PFX "Initialized "); 1076 for (--index; index >= 0; --index) { 1077 printk("[%s 0x%lx]%s", 1078 (I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" : 1079 ((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"), 1080 i2c_childlist[index].addr, (0 == index) ? "\n" : " "); 1081 } 1082 1083 kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); 1084 if (IS_ERR(kenvctrld_task)) { 1085 err = PTR_ERR(kenvctrld_task); 1086 goto out_deregister; 1087 } 1088 1089 return 0; 1090 1091out_deregister: 1092 misc_deregister(&envctrl_dev); 1093out_iounmap: 1094 of_iounmap(&op->resource[0], i2c, 0x2); 1095 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++) 1096 kfree(i2c_childlist[index].tables); 1097 1098 return err; 1099} 1100 1101static int envctrl_remove(struct platform_device *op) 1102{ 1103 int index; 1104 1105 kthread_stop(kenvctrld_task); 1106 1107 of_iounmap(&op->resource[0], i2c, 0x2); 1108 misc_deregister(&envctrl_dev); 1109 1110 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++) 1111 kfree(i2c_childlist[index].tables); 1112 1113 return 0; 1114} 1115 1116static const struct of_device_id envctrl_match[] = { 1117 { 1118 .name = "i2c", 1119 .compatible = "i2cpcf,8584", 1120 }, 1121 {}, 1122}; 1123MODULE_DEVICE_TABLE(of, envctrl_match); 1124 1125static struct platform_driver envctrl_driver = { 1126 .driver = { 1127 .name = DRIVER_NAME, 1128 .of_match_table = envctrl_match, 1129 }, 1130 .probe = envctrl_probe, 1131 .remove = envctrl_remove, 1132}; 1133 1134module_platform_driver(envctrl_driver); 1135 1136MODULE_LICENSE("GPL"); 1137