1menuconfig REGULATOR
2	bool "Voltage and Current Regulator Support"
3	help
4	  Generic Voltage and Current Regulator support.
5
6	  This framework is designed to provide a generic interface to voltage
7	  and current regulators within the Linux kernel. It's intended to
8	  provide voltage and current control to client or consumer drivers and
9	  also provide status information to user space applications through a
10	  sysfs interface.
11
12	  The intention is to allow systems to dynamically control regulator
13	  output in order to save power and prolong battery life. This applies
14	  to both voltage regulators (where voltage output is controllable) and
15	  current sinks (where current output is controllable).
16
17	  This framework safely compiles out if not selected so that client
18	  drivers can still be used in systems with no software controllable
19	  regulators.
20
21	  If unsure, say no.
22
23
24if REGULATOR
25
26config REGULATOR_DEBUG
27	bool "Regulator debug support"
28	help
29	  Say yes here to enable debugging support.
30
31config REGULATOR_FIXED_VOLTAGE
32	tristate "Fixed voltage regulator support"
33	help
34	  This driver provides support for fixed voltage regulators,
35	  useful for systems which use a combination of software
36	  managed regulators and simple non-configurable regulators.
37
38config REGULATOR_VIRTUAL_CONSUMER
39	tristate "Virtual regulator consumer support"
40	help
41	  This driver provides a virtual consumer for the voltage and
42	  current regulator API which provides sysfs controls for
43	  configuring the supplies requested.  This is mainly useful
44	  for test purposes.
45
46	  If unsure, say no.
47
48config REGULATOR_USERSPACE_CONSUMER
49	tristate "Userspace regulator consumer support"
50	help
51	  There are some classes of devices that are controlled entirely
52	  from user space. Userspace consumer driver provides ability to
53	  control power supplies for such devices.
54
55	  If unsure, say no.
56
57config REGULATOR_88PM800
58	tristate "Marvell 88PM800 Power regulators"
59	depends on MFD_88PM800
60	help
61	  This driver supports Marvell 88PM800 voltage regulator chips.
62	  It delivers digitally programmable output,
63	  the voltage is programmed via I2C interface.
64	  It's suitable to support PXA988 chips to control VCC_MAIN and
65	  various voltages.
66
67config REGULATOR_88PM8607
68	tristate "Marvell 88PM8607 Power regulators"
69	depends on MFD_88PM860X=y
70	help
71	  This driver supports 88PM8607 voltage regulator chips.
72
73config REGULATOR_ACT8865
74	tristate "Active-semi act8865 voltage regulator"
75	depends on I2C
76	select REGMAP_I2C
77	help
78	  This driver controls a active-semi act8865 voltage output
79	  regulator via I2C bus.
80
81config REGULATOR_AD5398
82	tristate "Analog Devices AD5398/AD5821 regulators"
83	depends on I2C
84	help
85	  This driver supports AD5398 and AD5821 current regulator chips.
86	  If building into module, its name is ad5398.ko.
87
88config REGULATOR_ANATOP
89	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
90	depends on MFD_SYSCON
91	help
92	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
93	  regulators. It is recommended that this option be
94	  enabled on i.MX6 platform.
95
96config REGULATOR_AAT2870
97	tristate "AnalogicTech AAT2870 Regulators"
98	depends on MFD_AAT2870_CORE
99	help
100	  If you have a AnalogicTech AAT2870 say Y to enable the
101	  regulator driver.
102
103config REGULATOR_AB3100
104	tristate "ST-Ericsson AB3100 Regulator functions"
105	depends on AB3100_CORE
106	default y if AB3100_CORE
107	help
108	 These regulators correspond to functionality in the
109	 AB3100 analog baseband dealing with power regulators
110	 for the system.
111
112config REGULATOR_AB8500
113	bool "ST-Ericsson AB8500 Power Regulators"
114	depends on AB8500_CORE
115	help
116	  This driver supports the regulators found on the ST-Ericsson mixed
117	  signal AB8500 PMIC
118
119config REGULATOR_ARIZONA
120	tristate "Wolfson Arizona class devices"
121	depends on MFD_ARIZONA
122	depends on SND_SOC
123	help
124	  Support for the regulators found on Wolfson Arizona class
125	  devices.
126
127config REGULATOR_AS3711
128	tristate "AS3711 PMIC"
129	depends on MFD_AS3711
130	help
131	  This driver provides support for the voltage regulators on the
132	  AS3711 PMIC
133
134config REGULATOR_AS3722
135	tristate "AMS AS3722 PMIC Regulators"
136	depends on MFD_AS3722
137	help
138	  This driver provides support for the voltage regulators on the
139	  AS3722 PMIC. This will enable support for all the software
140	  controllable DCDC/LDO regulators.
141
142config REGULATOR_AXP20X
143	tristate "X-POWERS AXP20X PMIC Regulators"
144	depends on MFD_AXP20X
145	help
146	  This driver provides support for the voltage regulators on the
147	  AXP20X PMIC.
148
149config REGULATOR_BCM590XX
150	tristate "Broadcom BCM590xx PMU Regulators"
151	depends on MFD_BCM590XX
152	help
153	  This driver provides support for the voltage regulators on the
154	  BCM590xx PMUs. This will enable support for the software
155	  controllable LDO/Switching regulators.
156
157config REGULATOR_DA903X
158	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
159	depends on PMIC_DA903X
160	help
161	  Say y here to support the BUCKs and LDOs regulators found on
162	  Dialog Semiconductor DA9030/DA9034 PMIC.
163
164config REGULATOR_DA9052
165	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
166	depends on PMIC_DA9052
167	help
168	  This driver supports the voltage regulators of DA9052-BC and
169	  DA9053-AA/Bx PMIC.
170
171config REGULATOR_DA9055
172	tristate "Dialog Semiconductor DA9055 regulators"
173	depends on MFD_DA9055
174	help
175	  Say y here to support the BUCKs and LDOs regulators found on
176	  Dialog Semiconductor DA9055 PMIC.
177
178	  This driver can also be built as a module. If so, the module
179	  will be called da9055-regulator.
180
181config REGULATOR_DA9062
182	tristate "Dialog Semiconductor DA9062 regulators"
183	depends on MFD_DA9062
184	help
185	  Say y here to support the BUCKs and LDOs regulators found on
186	  DA9062 PMICs.
187
188	  This driver can also be built as a module. If so, the module
189	  will be called da9062-regulator.
190
191config REGULATOR_DA9063
192	tristate "Dialog Semiconductor DA9063 regulators"
193	depends on MFD_DA9063
194	help
195	  Say y here to support the BUCKs and LDOs regulators found on
196	  DA9063 PMICs.
197
198	  This driver can also be built as a module. If so, the module
199	  will be called da9063-regulator.
200
201config REGULATOR_DA9210
202	tristate "Dialog Semiconductor DA9210 regulator"
203	depends on I2C
204	select REGMAP_I2C
205	help
206	  Say y here to support for the Dialog Semiconductor DA9210.
207	  The DA9210 is a multi-phase synchronous step down
208	  converter 12A DC-DC Buck controlled through an I2C
209	  interface.
210
211config REGULATOR_DA9211
212	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
213	depends on I2C
214	select REGMAP_I2C
215	help
216	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
217	  /DA9213/DA9214/DA9215.
218	  The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
219	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
220	  interface.
221
222config REGULATOR_DBX500_PRCMU
223	bool
224
225config REGULATOR_DB8500_PRCMU
226	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
227	depends on MFD_DB8500_PRCMU
228	select REGULATOR_DBX500_PRCMU
229	help
230	  This driver supports the voltage domain regulators controlled by the
231	  DB8500 PRCMU
232
233config REGULATOR_FAN53555
234	tristate "Fairchild FAN53555 Regulator"
235	depends on I2C
236	select REGMAP_I2C
237	help
238	  This driver supports Fairchild FAN53555 Digitally Programmable
239	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
240	  regulator that delivers a digitally programmable output from an
241	  input voltage supply of 2.5V to 5.5V. The output voltage is
242	  programmed through an I2C interface.
243
244config REGULATOR_GPIO
245	tristate "GPIO regulator support"
246	depends on GPIOLIB || COMPILE_TEST
247	help
248	  This driver provides support for regulators that can be
249	  controlled via gpios.
250	  It is capable of supporting current and voltage regulators
251	  and the platform has to provide a mapping of GPIO-states
252	  to target volts/amps.
253
254config REGULATOR_HI6421
255	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
256	depends on MFD_HI6421_PMIC && OF
257	help
258	  This driver provides support for the voltage regulators on the
259	  HiSilicon Hi6421 PMU / Codec IC.
260	  Hi6421 is a multi-function device which, on regulator part, provides
261	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
262	  of them come with support to either ECO (idle) or sleep mode.
263
264config REGULATOR_ISL9305
265	tristate "Intersil ISL9305 regulator"
266	depends on I2C
267	select REGMAP_I2C
268	help
269	  This driver supports ISL9305 voltage regulator chip.
270
271config REGULATOR_ISL6271A
272	tristate "Intersil ISL6271A Power regulator"
273	depends on I2C
274	help
275	  This driver supports ISL6271A voltage regulator chip.
276
277config REGULATOR_LP3971
278	tristate "National Semiconductors LP3971 PMIC regulator driver"
279	depends on I2C
280	help
281	 Say Y here to support the voltage regulators and convertors
282	 on National Semiconductors LP3971 PMIC
283
284config REGULATOR_LP3972
285	tristate "National Semiconductors LP3972 PMIC regulator driver"
286	depends on I2C
287	help
288	 Say Y here to support the voltage regulators and convertors
289	 on National Semiconductors LP3972 PMIC
290
291config REGULATOR_LP872X
292	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
293	depends on I2C
294	select REGMAP_I2C
295	help
296	  This driver supports LP8720/LP8725 PMIC
297
298config REGULATOR_LP8755
299	tristate "TI LP8755 High Performance PMU driver"
300	depends on I2C
301	select REGMAP_I2C
302	help
303	  This driver supports LP8755 High Performance PMU driver. This
304	  chip contains six step-down DC/DC converters which can support
305	  9 mode multiphase configuration.
306
307config REGULATOR_LP8788
308	tristate "TI LP8788 Power Regulators"
309	depends on MFD_LP8788
310	help
311	  This driver supports LP8788 voltage regulator chip.
312
313config REGULATOR_LTC3589
314	tristate "LTC3589 8-output voltage regulator"
315	depends on I2C
316	select REGMAP_I2C
317	help
318	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
319	  8-output regulators controlled via I2C.
320
321config REGULATOR_MAX14577
322	tristate "Maxim 14577/77836 regulator"
323	depends on MFD_MAX14577
324	help
325	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
326	  The MAX14577 regulators include safeout LDO and charger current
327	  regulator. The MAX77836 has two additional LDOs.
328
329config REGULATOR_MAX1586
330	tristate "Maxim 1586/1587 voltage regulator"
331	depends on I2C
332	help
333	  This driver controls a Maxim 1586 or 1587 voltage output
334	  regulator via I2C bus. The provided regulator is suitable
335	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
336
337config REGULATOR_MAX8649
338	tristate "Maxim 8649 voltage regulator"
339	depends on I2C
340	select REGMAP_I2C
341	help
342	  This driver controls a Maxim 8649 voltage output regulator via
343	  I2C bus.
344
345config REGULATOR_MAX8660
346	tristate "Maxim 8660/8661 voltage regulator"
347	depends on I2C
348	help
349	  This driver controls a Maxim 8660/8661 voltage output
350	  regulator via I2C bus.
351
352config REGULATOR_MAX8907
353	tristate "Maxim 8907 voltage regulator"
354	depends on MFD_MAX8907
355	help
356	  This driver controls a Maxim 8907 voltage output regulator
357	  via I2C bus. The provided regulator is suitable for Tegra
358	  chip to control Step-Down DC-DC and LDOs.
359
360config REGULATOR_MAX8925
361	tristate "Maxim MAX8925 Power Management IC"
362	depends on MFD_MAX8925
363	help
364	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
365
366config REGULATOR_MAX8952
367	tristate "Maxim MAX8952 Power Management IC"
368	depends on I2C
369	help
370	  This driver controls a Maxim 8952 voltage output regulator
371	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
372	  modes ranging from 0.77V to 1.40V by 0.01V steps.
373
374config REGULATOR_MAX8973
375	tristate "Maxim MAX8973 voltage regulator "
376	depends on I2C
377	select REGMAP_I2C
378	help
379	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
380	  switching regulator delievers up to 9A of output current. Each
381	  phase operates at a 2MHz fixed frequency with a 120 deg shift
382	  from the adjacent phase, allowing the use of small magnetic component.
383
384config REGULATOR_MAX8997
385	tristate "Maxim 8997/8966 regulator"
386	depends on MFD_MAX8997
387	help
388	  This driver controls a Maxim 8997/8966 regulator
389	  via I2C bus. The provided regulator is suitable for S5PC110,
390	  S5PV210, and Exynos-4 chips to control VCC_CORE and
391	  VCC_USIM voltages.
392
393config REGULATOR_MAX8998
394	tristate "Maxim 8998 voltage regulator"
395	depends on MFD_MAX8998
396	help
397	  This driver controls a Maxim 8998 voltage output regulator
398	  via I2C bus. The provided regulator is suitable for S3C6410
399	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
400
401config REGULATOR_MAX77686
402	tristate "Maxim 77686 regulator"
403	depends on MFD_MAX77686
404	help
405	  This driver controls a Maxim 77686 regulator
406	  via I2C bus. The provided regulator is suitable for
407	  Exynos-4 chips to control VARM and VINT voltages.
408
409config REGULATOR_MAX77693
410	tristate "Maxim 77693/77843 regulator"
411	depends on (MFD_MAX77693 || MFD_MAX77843)
412	help
413	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
414	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
415	  and one current regulator 'CHARGER'. This is suitable for
416	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
417
418config REGULATOR_MAX77802
419	tristate "Maxim 77802 regulator"
420	depends on MFD_MAX77686
421	help
422	  This driver controls a Maxim 77802 regulator
423	  via I2C bus. The provided regulator is suitable for
424	  Exynos5420/Exynos5800 SoCs to control various voltages.
425	  It includes support for control of voltage and ramp speed.
426
427config REGULATOR_MC13XXX_CORE
428	tristate
429
430config REGULATOR_MC13783
431	tristate "Freescale MC13783 regulator driver"
432	depends on MFD_MC13XXX
433	select REGULATOR_MC13XXX_CORE
434	help
435	  Say y here to support the regulators found on the Freescale MC13783
436	  PMIC.
437
438config REGULATOR_MC13892
439	tristate "Freescale MC13892 regulator driver"
440	depends on MFD_MC13XXX
441	select REGULATOR_MC13XXX_CORE
442	help
443	  Say y here to support the regulators found on the Freescale MC13892
444	  PMIC.
445
446config REGULATOR_MT6311
447	tristate "MediaTek MT6311 PMIC"
448	depends on I2C
449	select REGMAP_I2C
450	help
451	  Say y here to select this option to enable the power regulator of
452	  MediaTek MT6311 PMIC.
453	  This driver supports the control of different power rails of device
454	  through regulator interface.
455
456config REGULATOR_MT6397
457	tristate "MediaTek MT6397 PMIC"
458	depends on MFD_MT6397
459	help
460	  Say y here to select this option to enable the power regulator of
461	  MediaTek MT6397 PMIC.
462	  This driver supports the control of different power rails of device
463	  through regulator interface.
464
465config REGULATOR_PALMAS
466	tristate "TI Palmas PMIC Regulators"
467	depends on MFD_PALMAS
468	help
469	  If you wish to control the regulators on the Palmas series of
470	  chips say Y here. This will enable support for all the software
471	  controllable SMPS/LDO regulators.
472
473	  The regulators available on Palmas series chips vary depending
474	  on the muxing. This is handled automatically in the driver by
475	  reading the mux info from OTP.
476
477config REGULATOR_PBIAS
478	tristate "PBIAS OMAP regulator driver"
479	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
480	help
481	 Say y here to support pbias regulator for mmc1:SD card i/o
482	 on OMAP SoCs.
483	 This driver provides support for OMAP pbias modelled
484	 regulators.
485
486config REGULATOR_PCAP
487	tristate "Motorola PCAP2 regulator driver"
488	depends on EZX_PCAP
489	help
490	 This driver provides support for the voltage regulators of the
491	 PCAP2 PMIC.
492
493config REGULATOR_PCF50633
494	tristate "NXP PCF50633 regulator driver"
495	depends on MFD_PCF50633
496	help
497	 Say Y here to support the voltage regulators and convertors
498	 on PCF50633
499
500config REGULATOR_PFUZE100
501	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
502	depends on I2C
503	select REGMAP_I2C
504	help
505	  Say y here to support the regulators found on the Freescale
506	  PFUZE100/PFUZE200 PMIC.
507
508config REGULATOR_PWM
509	tristate "PWM voltage regulator"
510	depends on PWM
511	help
512	  This driver supports PWM controlled voltage regulators. PWM
513	  duty cycle can increase or decrease the voltage.
514
515config REGULATOR_QCOM_RPM
516	tristate "Qualcomm RPM regulator driver"
517	depends on MFD_QCOM_RPM
518	help
519	  If you say yes to this option, support will be included for the
520	  regulators exposed by the Resource Power Manager found in Qualcomm
521	  8660, 8960 and 8064 based devices.
522
523	  Say M here if you want to include support for the regulators on the
524	  Qualcomm RPM as a module. The module will be named
525	  "qcom_rpm-regulator".
526
527config REGULATOR_QCOM_SMD_RPM
528	tristate "Qualcomm SMD based RPM regulator driver"
529	depends on QCOM_SMD_RPM
530	help
531	  If you say yes to this option, support will be included for the
532	  regulators exposed by the Resource Power Manager found in Qualcomm
533	  8974 based devices.
534
535	  Say M here if you want to include support for the regulators on the
536	  Qualcomm RPM as a module. The module will be named
537	  "qcom_smd-regulator".
538
539config REGULATOR_QCOM_SPMI
540	tristate "Qualcomm SPMI regulator driver"
541	depends on SPMI || COMPILE_TEST
542	help
543	  If you say yes to this option, support will be included for the
544	  regulators found in Qualcomm SPMI PMICs.
545
546	  Say M here if you want to include support for the regulators on the
547	  Qualcomm SPMI PMICs as a module. The module will be named
548	  "qcom_spmi-regulator".
549
550config REGULATOR_RC5T583
551	tristate "RICOH RC5T583 Power regulators"
552	depends on MFD_RC5T583
553	help
554	  Select this option to enable the power regulator of RICOH
555	  PMIC RC5T583.
556	  This driver supports the control of different power rails of device
557	  through regulator interface. The device supports multiple DCDC/LDO
558	  outputs which can be controlled by i2c communication.
559
560config REGULATOR_RK808
561	tristate "Rockchip RK808 Power regulators"
562	depends on MFD_RK808
563	help
564	  Select this option to enable the power regulator of ROCKCHIP
565	  PMIC RK808.
566	  This driver supports the control of different power rails of device
567	  through regulator interface. The device supports multiple DCDC/LDO
568	  outputs which can be controlled by i2c communication.
569
570config REGULATOR_RN5T618
571	tristate "Ricoh RN5T618 voltage regulators"
572	depends on MFD_RN5T618
573	help
574	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.
575
576config REGULATOR_RT5033
577	tristate "Richtek RT5033 Regulators"
578	depends on MFD_RT5033
579	help
580	  This adds support for voltage and current regulators in Richtek
581	  RT5033 PMIC. The device supports multiple regulators like
582	  current source, LDO and Buck.
583
584config REGULATOR_S2MPA01
585	tristate "Samsung S2MPA01 voltage regulator"
586	depends on MFD_SEC_CORE
587	help
588	 This driver controls Samsung S2MPA01 voltage output regulator
589	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
590
591config REGULATOR_S2MPS11
592	tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
593	depends on MFD_SEC_CORE
594	help
595	 This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
596	 output regulator via I2C bus. The chip is comprised of high efficient
597	 Buck converters including Dual-Phase Buck converter, Buck-Boost
598	 converter, various LDOs.
599
600config REGULATOR_S5M8767
601	tristate "Samsung S5M8767A voltage regulator"
602	depends on MFD_SEC_CORE
603	help
604	 This driver supports a Samsung S5M8767A voltage output regulator
605	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
606	 supports DVS mode with 8bits of output voltage control.
607
608config REGULATOR_SKY81452
609	tristate "Skyworks Solutions SKY81452 voltage regulator"
610	depends on MFD_SKY81452
611	help
612	  This driver supports Skyworks SKY81452 voltage output regulator
613	  via I2C bus. SKY81452 has one voltage linear regulator can be
614	  programmed from 4.5V to 20V.
615
616	  This driver can also be built as a module. If so, the module
617	  will be called sky81452-regulator.
618
619config REGULATOR_TI_ABB
620	tristate "TI Adaptive Body Bias on-chip LDO"
621	depends on ARCH_OMAP
622	help
623	  Select this option to support Texas Instruments' on-chip Adaptive Body
624	  Bias (ABB) LDO regulators. It is recommended that this option be
625	  enabled on required TI SoC. Certain Operating Performance Points
626	  on TI SoCs may be unstable without enabling this as it provides
627	  device specific optimized bias to allow/optimize functionality.
628
629config REGULATOR_STW481X_VMMC
630	bool "ST Microelectronics STW481X VMMC regulator"
631	depends on MFD_STW481X || COMPILE_TEST
632	default y if MFD_STW481X
633	help
634	  This driver supports the internal VMMC regulator in the STw481x
635	  PMIC chips.
636
637config REGULATOR_TPS51632
638	tristate "TI TPS51632 Power Regulator"
639	depends on I2C
640	select REGMAP_I2C
641	help
642	  This driver supports TPS51632 voltage regulator chip.
643	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
644	  with Serial VID control and DVFS.
645	  The voltage output can be configure through I2C interface or PWM
646	  interface.
647
648config REGULATOR_TPS6105X
649	tristate "TI TPS6105X Power regulators"
650	depends on TPS6105X
651	default y if TPS6105X
652	help
653	  This driver supports TPS61050/TPS61052 voltage regulator chips.
654	  It is a single boost converter primarily for white LEDs and
655	  audio amplifiers.
656
657config REGULATOR_TPS62360
658	tristate "TI TPS6236x Power Regulator"
659	depends on I2C
660	select REGMAP_I2C
661	help
662	  This driver supports TPS6236x voltage regulator chip. This
663	  regulator is meant for processor core supply. This chip is
664	  high-frequency synchronous step down dc-dc converter optimized
665	  for battery-powered portable applications.
666
667config REGULATOR_TPS65023
668	tristate "TI TPS65023 Power regulators"
669	depends on I2C
670	select REGMAP_I2C
671	help
672	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
673	  three step-down converters and two general-purpose LDO voltage regulators.
674	  It supports TI's software based Class-2 SmartReflex implementation.
675
676config REGULATOR_TPS6507X
677	tristate "TI TPS6507X Power regulators"
678	depends on I2C
679	help
680	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
681	  three step-down converters and two general-purpose LDO voltage regulators.
682	  It supports TI's software based Class-2 SmartReflex implementation.
683
684config REGULATOR_TPS65090
685	tristate "TI TPS65090 Power regulator"
686	depends on MFD_TPS65090
687	help
688	  This driver provides support for the voltage regulators on the
689	  TI TPS65090 PMIC.
690
691config REGULATOR_TPS65217
692	tristate "TI TPS65217 Power regulators"
693	depends on MFD_TPS65217
694	help
695	  This driver supports TPS65217 voltage regulator chips. TPS65217
696	  provides three step-down converters and four general-purpose LDO
697	  voltage regulators. It supports software based voltage control
698	  for different voltage domains
699
700config REGULATOR_TPS65218
701	tristate "TI TPS65218 Power regulators"
702	depends on MFD_TPS65218 && OF
703	help
704	  This driver supports TPS65218 voltage regulator chips. TPS65218
705	  provides six step-down converters and one general-purpose LDO
706	  voltage regulators. It supports software based voltage control
707	  for different voltage domains
708
709config REGULATOR_TPS6524X
710	tristate "TI TPS6524X Power regulators"
711	depends on SPI
712	help
713	  This driver supports TPS6524X voltage regulator chips. TPS6524X
714	  provides three step-down converters and two general-purpose LDO
715	  voltage regulators.  This device is interfaced using a customized
716	  serial interface currently supported on the sequencer serial
717	  port controller.
718
719config REGULATOR_TPS6586X
720	tristate "TI TPS6586X Power regulators"
721	depends on MFD_TPS6586X
722	help
723	  This driver supports TPS6586X voltage regulator chips.
724
725config REGULATOR_TPS65910
726	tristate "TI TPS65910/TPS65911 Power Regulators"
727	depends on MFD_TPS65910
728	help
729	  This driver supports TPS65910/TPS65911 voltage regulator chips.
730
731config REGULATOR_TPS65912
732	tristate "TI TPS65912 Power regulator"
733	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
734	help
735	    This driver supports TPS65912 voltage regulator chip.
736
737config REGULATOR_TPS80031
738	tristate "TI TPS80031/TPS80032 power regualtor driver"
739	depends on MFD_TPS80031
740	help
741	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
742	  Path and Battery Charger. It has 5 configurable step-down
743	  converters, 11 general purpose LDOs, VBUS generator and digital
744	  output to control regulators.
745
746config REGULATOR_TWL4030
747	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
748	depends on TWL4030_CORE
749	help
750	  This driver supports the voltage regulators provided by
751	  this family of companion chips.
752
753config REGULATOR_VEXPRESS
754	tristate "Versatile Express regulators"
755	depends on VEXPRESS_CONFIG
756	help
757	  This driver provides support for voltage regulators available
758	  on the ARM Ltd's Versatile Express platform.
759
760config REGULATOR_WM831X
761	tristate "Wolfson Microelectronics WM831x PMIC regulators"
762	depends on MFD_WM831X
763	help
764	  Support the voltage and current regulators of the WM831x series
765	  of PMIC devices.
766
767config REGULATOR_WM8350
768	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
769	depends on MFD_WM8350
770	help
771	  This driver provides support for the voltage and current regulators
772	  of the WM8350 AudioPlus PMIC.
773
774config REGULATOR_WM8400
775	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
776	depends on MFD_WM8400
777	help
778	  This driver provides support for the voltage regulators of the
779	  WM8400 AudioPlus PMIC.
780
781config REGULATOR_WM8994
782	tristate "Wolfson Microelectronics WM8994 CODEC"
783	depends on MFD_WM8994
784	help
785	  This driver provides support for the voltage regulators on the
786	  WM8994 CODEC.
787
788endif
789
790