1/*
2 * Samsung SoC USB 1.1/2.0 PHY driver
3 *
4 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
5 * Author: Kamil Debski <k.debski@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/clk.h>
13#include <linux/mfd/syscon.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/of_address.h>
17#include <linux/phy/phy.h>
18#include <linux/platform_device.h>
19#include <linux/spinlock.h>
20#include "phy-samsung-usb2.h"
21
22static int samsung_usb2_phy_power_on(struct phy *phy)
23{
24	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
25	struct samsung_usb2_phy_driver *drv = inst->drv;
26	int ret;
27
28	dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
29		inst->cfg->label);
30
31	if (drv->vbus) {
32		ret = regulator_enable(drv->vbus);
33		if (ret)
34			goto err_regulator;
35	}
36
37	ret = clk_prepare_enable(drv->clk);
38	if (ret)
39		goto err_main_clk;
40	ret = clk_prepare_enable(drv->ref_clk);
41	if (ret)
42		goto err_instance_clk;
43	if (inst->cfg->power_on) {
44		spin_lock(&drv->lock);
45		ret = inst->cfg->power_on(inst);
46		spin_unlock(&drv->lock);
47		if (ret)
48			goto err_power_on;
49	}
50
51	return 0;
52
53err_power_on:
54	clk_disable_unprepare(drv->ref_clk);
55err_instance_clk:
56	clk_disable_unprepare(drv->clk);
57err_main_clk:
58	if (drv->vbus)
59		regulator_disable(drv->vbus);
60err_regulator:
61	return ret;
62}
63
64static int samsung_usb2_phy_power_off(struct phy *phy)
65{
66	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
67	struct samsung_usb2_phy_driver *drv = inst->drv;
68	int ret = 0;
69
70	dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
71		inst->cfg->label);
72	if (inst->cfg->power_off) {
73		spin_lock(&drv->lock);
74		ret = inst->cfg->power_off(inst);
75		spin_unlock(&drv->lock);
76		if (ret)
77			return ret;
78	}
79	clk_disable_unprepare(drv->ref_clk);
80	clk_disable_unprepare(drv->clk);
81	if (drv->vbus)
82		ret = regulator_disable(drv->vbus);
83
84	return ret;
85}
86
87static const struct phy_ops samsung_usb2_phy_ops = {
88	.power_on	= samsung_usb2_phy_power_on,
89	.power_off	= samsung_usb2_phy_power_off,
90	.owner		= THIS_MODULE,
91};
92
93static struct phy *samsung_usb2_phy_xlate(struct device *dev,
94					struct of_phandle_args *args)
95{
96	struct samsung_usb2_phy_driver *drv;
97
98	drv = dev_get_drvdata(dev);
99	if (!drv)
100		return ERR_PTR(-EINVAL);
101
102	if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
103		return ERR_PTR(-ENODEV);
104
105	return drv->instances[args->args[0]].phy;
106}
107
108static const struct of_device_id samsung_usb2_phy_of_match[] = {
109#ifdef CONFIG_PHY_EXYNOS4X12_USB2
110	{
111		.compatible = "samsung,exynos3250-usb2-phy",
112		.data = &exynos3250_usb2_phy_config,
113	},
114#endif
115#ifdef CONFIG_PHY_EXYNOS4210_USB2
116	{
117		.compatible = "samsung,exynos4210-usb2-phy",
118		.data = &exynos4210_usb2_phy_config,
119	},
120#endif
121#ifdef CONFIG_PHY_EXYNOS4X12_USB2
122	{
123		.compatible = "samsung,exynos4x12-usb2-phy",
124		.data = &exynos4x12_usb2_phy_config,
125	},
126#endif
127#ifdef CONFIG_PHY_EXYNOS5250_USB2
128	{
129		.compatible = "samsung,exynos5250-usb2-phy",
130		.data = &exynos5250_usb2_phy_config,
131	},
132#endif
133#ifdef CONFIG_PHY_S5PV210_USB2
134	{
135		.compatible = "samsung,s5pv210-usb2-phy",
136		.data = &s5pv210_usb2_phy_config,
137	},
138#endif
139	{ },
140};
141MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
142
143static int samsung_usb2_phy_probe(struct platform_device *pdev)
144{
145	const struct of_device_id *match;
146	const struct samsung_usb2_phy_config *cfg;
147	struct device *dev = &pdev->dev;
148	struct phy_provider *phy_provider;
149	struct resource *mem;
150	struct samsung_usb2_phy_driver *drv;
151	int i, ret;
152
153	if (!pdev->dev.of_node) {
154		dev_err(dev, "This driver is required to be instantiated from device tree\n");
155		return -EINVAL;
156	}
157
158	match = of_match_node(samsung_usb2_phy_of_match, pdev->dev.of_node);
159	if (!match) {
160		dev_err(dev, "of_match_node() failed\n");
161		return -EINVAL;
162	}
163	cfg = match->data;
164
165	drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) +
166		cfg->num_phys * sizeof(struct samsung_usb2_phy_instance),
167								GFP_KERNEL);
168	if (!drv)
169		return -ENOMEM;
170
171	dev_set_drvdata(dev, drv);
172	spin_lock_init(&drv->lock);
173
174	drv->cfg = cfg;
175	drv->dev = dev;
176
177	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
178	drv->reg_phy = devm_ioremap_resource(dev, mem);
179	if (IS_ERR(drv->reg_phy)) {
180		dev_err(dev, "Failed to map register memory (phy)\n");
181		return PTR_ERR(drv->reg_phy);
182	}
183
184	drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
185		"samsung,pmureg-phandle");
186	if (IS_ERR(drv->reg_pmu)) {
187		dev_err(dev, "Failed to map PMU registers (via syscon)\n");
188		return PTR_ERR(drv->reg_pmu);
189	}
190
191	if (drv->cfg->has_mode_switch) {
192		drv->reg_sys = syscon_regmap_lookup_by_phandle(
193				pdev->dev.of_node, "samsung,sysreg-phandle");
194		if (IS_ERR(drv->reg_sys)) {
195			dev_err(dev, "Failed to map system registers (via syscon)\n");
196			return PTR_ERR(drv->reg_sys);
197		}
198	}
199
200	drv->clk = devm_clk_get(dev, "phy");
201	if (IS_ERR(drv->clk)) {
202		dev_err(dev, "Failed to get clock of phy controller\n");
203		return PTR_ERR(drv->clk);
204	}
205
206	drv->ref_clk = devm_clk_get(dev, "ref");
207	if (IS_ERR(drv->ref_clk)) {
208		dev_err(dev, "Failed to get reference clock for the phy controller\n");
209		return PTR_ERR(drv->ref_clk);
210	}
211
212	drv->ref_rate = clk_get_rate(drv->ref_clk);
213	if (drv->cfg->rate_to_clk) {
214		ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val);
215		if (ret)
216			return ret;
217	}
218
219	drv->vbus = devm_regulator_get(dev, "vbus");
220	if (IS_ERR(drv->vbus)) {
221		ret = PTR_ERR(drv->vbus);
222		if (ret == -EPROBE_DEFER)
223			return ret;
224		drv->vbus = NULL;
225	}
226
227	for (i = 0; i < drv->cfg->num_phys; i++) {
228		char *label = drv->cfg->phys[i].label;
229		struct samsung_usb2_phy_instance *p = &drv->instances[i];
230
231		dev_dbg(dev, "Creating phy \"%s\"\n", label);
232		p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops);
233		if (IS_ERR(p->phy)) {
234			dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n",
235				label);
236			return PTR_ERR(p->phy);
237		}
238
239		p->cfg = &drv->cfg->phys[i];
240		p->drv = drv;
241		phy_set_bus_width(p->phy, 8);
242		phy_set_drvdata(p->phy, p);
243	}
244
245	phy_provider = devm_of_phy_provider_register(dev,
246							samsung_usb2_phy_xlate);
247	if (IS_ERR(phy_provider)) {
248		dev_err(drv->dev, "Failed to register phy provider\n");
249		return PTR_ERR(phy_provider);
250	}
251
252	return 0;
253}
254
255static struct platform_driver samsung_usb2_phy_driver = {
256	.probe	= samsung_usb2_phy_probe,
257	.driver = {
258		.of_match_table	= samsung_usb2_phy_of_match,
259		.name		= "samsung-usb2-phy",
260	}
261};
262
263module_platform_driver(samsung_usb2_phy_driver);
264MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver");
265MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
266MODULE_LICENSE("GPL v2");
267MODULE_ALIAS("platform:samsung-usb2-phy");
268