1# 2# Marvell device configuration 3# 4 5config NET_VENDOR_MARVELL 6 bool "Marvell devices" 7 default y 8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Marvell devices. If you say Y, you will be 15 asked for your specific card in the following questions. 16 17if NET_VENDOR_MARVELL 18 19config MV643XX_ETH 20 tristate "Marvell Discovery (643XX) and Orion ethernet support" 21 depends on (MV64X60 || PPC32 || PLAT_ORION) && INET 22 select PHYLIB 23 select MVMDIO 24 ---help--- 25 This driver supports the gigabit ethernet MACs in the 26 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 27 in the Marvell Orion ARM SoC family. 28 29 Some boards that use the Discovery chipset are the Momenco 30 Ocelot C and Jaguar ATX and Pegasos II. 31 32config MVMDIO 33 tristate "Marvell MDIO interface support" 34 depends on HAS_IOMEM 35 select PHYLIB 36 ---help--- 37 This driver supports the MDIO interface found in the network 38 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, 39 Dove, Armada 370 and Armada XP). 40 41 This driver is used by the MV643XX_ETH and MVNETA drivers. 42 43config MVNETA 44 tristate "Marvell Armada 370/38x/XP network interface support" 45 depends on PLAT_ORION 46 select MVMDIO 47 select FIXED_PHY 48 ---help--- 49 This driver supports the network interface units in the 50 Marvell ARMADA XP, ARMADA 370 and ARMADA 38x SoC family. 51 52 Note that this driver is distinct from the mv643xx_eth 53 driver, which should be used for the older Marvell SoCs 54 (Dove, Orion, Discovery, Kirkwood). 55 56config MVPP2 57 tristate "Marvell Armada 375 network interface support" 58 depends on MACH_ARMADA_375 59 select MVMDIO 60 ---help--- 61 This driver supports the network interface units in the 62 Marvell ARMADA 375 SoC. 63 64config PXA168_ETH 65 tristate "Marvell pxa168 ethernet support" 66 depends on HAS_IOMEM && HAS_DMA 67 depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST 68 select PHYLIB 69 ---help--- 70 This driver supports the pxa168 Ethernet ports. 71 72 To compile this driver as a module, choose M here. The module 73 will be called pxa168_eth. 74 75config SKGE 76 tristate "Marvell Yukon Gigabit Ethernet support" 77 depends on PCI 78 select CRC32 79 ---help--- 80 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 81 and related Gigabit Ethernet adapters. It is a new smaller driver 82 with better performance and more complete ethtool support. 83 84 It does not support the link failover and network management 85 features that "portable" vendor supplied sk98lin driver does. 86 87 This driver supports adapters based on the original Yukon chipset: 88 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 89 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 90 91 It does not support the newer Yukon2 chipset: a separate driver, 92 sky2, is provided for these adapters. 93 94 To compile this driver as a module, choose M here: the module 95 will be called skge. This is recommended. 96 97config SKGE_DEBUG 98 bool "Debugging interface" 99 depends on SKGE && DEBUG_FS 100 ---help--- 101 This option adds the ability to dump driver state for debugging. 102 The file /sys/kernel/debug/skge/ethX displays the state of the internal 103 transmit and receive rings. 104 105 If unsure, say N. 106 107config SKGE_GENESIS 108 bool "Support for older SysKonnect Genesis boards" 109 depends on SKGE 110 ---help--- 111 This enables support for the older and uncommon SysKonnect Genesis 112 chips, which support MII via an external transceiver, instead of 113 an internal one. Disabling this option will save some memory 114 by making code smaller. If unsure say Y. 115 116config SKY2 117 tristate "Marvell Yukon 2 support" 118 depends on PCI 119 select CRC32 120 ---help--- 121 This driver supports Gigabit Ethernet adapters based on the 122 Marvell Yukon 2 chipset: 123 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 124 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 125 126 There is companion driver for the older Marvell Yukon and 127 SysKonnect Genesis based adapters: skge. 128 129 To compile this driver as a module, choose M here: the module 130 will be called sky2. This is recommended. 131 132config SKY2_DEBUG 133 bool "Debugging interface" 134 depends on SKY2 && DEBUG_FS 135 ---help--- 136 This option adds the ability to dump driver state for debugging. 137 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 138 transmit and receive rings. 139 140 If unsure, say N. 141 142endif # NET_VENDOR_MARVELL 143