1config RC_CORE
2	tristate
3	depends on MEDIA_RC_SUPPORT
4	depends on INPUT
5	default y
6
7source "drivers/media/rc/keymaps/Kconfig"
8
9menuconfig RC_DECODERS
10        bool "Remote controller decoders"
11	depends on RC_CORE
12	default y
13
14if RC_DECODERS
15config LIRC
16	tristate "LIRC interface driver"
17	depends on RC_CORE
18
19	---help---
20	   Enable this option to build the Linux Infrared Remote
21	   Control (LIRC) core device interface driver. The LIRC
22	   interface passes raw IR to and from userspace, where the
23	   LIRC daemon handles protocol decoding for IR reception and
24	   encoding for IR transmitting (aka "blasting").
25
26config IR_LIRC_CODEC
27	tristate "Enable IR to LIRC bridge"
28	depends on RC_CORE
29	depends on LIRC
30	default y
31
32	---help---
33	   Enable this option to pass raw IR to and from userspace via
34	   the LIRC interface.
35
36
37config IR_NEC_DECODER
38	tristate "Enable IR raw decoder for the NEC protocol"
39	depends on RC_CORE
40	select BITREVERSE
41	default y
42
43	---help---
44	   Enable this option if you have IR with NEC protocol, and
45	   if the IR is decoded in software
46
47config IR_RC5_DECODER
48	tristate "Enable IR raw decoder for the RC-5 protocol"
49	depends on RC_CORE
50	select BITREVERSE
51	default y
52
53	---help---
54	   Enable this option if you have IR with RC-5 protocol, and
55	   if the IR is decoded in software
56
57config IR_RC6_DECODER
58	tristate "Enable IR raw decoder for the RC6 protocol"
59	depends on RC_CORE
60	select BITREVERSE
61	default y
62
63	---help---
64	   Enable this option if you have an infrared remote control which
65	   uses the RC6 protocol, and you need software decoding support.
66
67config IR_JVC_DECODER
68	tristate "Enable IR raw decoder for the JVC protocol"
69	depends on RC_CORE
70	select BITREVERSE
71	default y
72
73	---help---
74	   Enable this option if you have an infrared remote control which
75	   uses the JVC protocol, and you need software decoding support.
76
77config IR_SONY_DECODER
78	tristate "Enable IR raw decoder for the Sony protocol"
79	depends on RC_CORE
80	select BITREVERSE
81	default y
82
83	---help---
84	   Enable this option if you have an infrared remote control which
85	   uses the Sony protocol, and you need software decoding support.
86
87config IR_SANYO_DECODER
88	tristate "Enable IR raw decoder for the Sanyo protocol"
89	depends on RC_CORE
90	default y
91
92	---help---
93	   Enable this option if you have an infrared remote control which
94	   uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
95	   and you need software decoding support.
96
97config IR_SHARP_DECODER
98	tristate "Enable IR raw decoder for the Sharp protocol"
99	depends on RC_CORE
100	default y
101
102	---help---
103	   Enable this option if you have an infrared remote control which
104	   uses the Sharp protocol, and you need software decoding support.
105
106config IR_MCE_KBD_DECODER
107	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
108	depends on RC_CORE
109	select BITREVERSE
110	default y
111
112	---help---
113	   Enable this option if you have a Microsoft Remote Keyboard for
114	   Windows Media Center Edition, which you would like to use with
115	   a raw IR receiver in your system.
116
117config IR_XMP_DECODER
118	tristate "Enable IR raw decoder for the XMP protocol"
119	depends on RC_CORE
120	select BITREVERSE
121	default y
122
123	---help---
124	   Enable this option if you have IR with XMP protocol, and
125	   if the IR is decoded in software
126endif #RC_DECODERS
127
128menuconfig RC_DEVICES
129	bool "Remote Controller devices"
130	depends on RC_CORE
131
132if RC_DEVICES
133
134config RC_ATI_REMOTE
135	tristate "ATI / X10 based USB RF remote controls"
136	depends on USB_ARCH_HAS_HCD
137	depends on RC_CORE
138	select USB
139	help
140	   Say Y here if you want to use an X10 based USB remote control.
141	   These are RF remotes with USB receivers.
142
143	   Such devices include the ATI remote that comes with many of ATI's
144	   All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
145	   Medion RF remote, and SnapStream FireFly remote.
146
147	   This driver provides mouse pointer, left and right mouse buttons,
148	   and maps all the other remote buttons to keypress events.
149
150	   To compile this driver as a module, choose M here: the module will be
151	   called ati_remote.
152
153config IR_ENE
154	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
155	depends on PNP
156	depends on RC_CORE
157	---help---
158	   Say Y here to enable support for integrated infrared receiver
159	   /transceiver made by ENE.
160
161	   You can see if you have it by looking at lspnp output.
162	   Output should include ENE0100 ENE0200 or something similar.
163
164	   To compile this driver as a module, choose M here: the
165	   module will be called ene_ir.
166
167config IR_HIX5HD2
168	tristate "Hisilicon hix5hd2 IR remote control"
169	depends on RC_CORE
170	help
171	 Say Y here if you want to use hisilicon hix5hd2 remote control.
172	 To compile this driver as a module, choose M here: the module will be
173	 called ir-hix5hd2.
174
175	 If you're not sure, select N here
176
177config IR_IMON
178	tristate "SoundGraph iMON Receiver and Display"
179	depends on USB_ARCH_HAS_HCD
180	depends on RC_CORE
181	select USB
182	---help---
183	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
184	   IR Receiver and/or LCD/VFD/VGA display.
185
186	   To compile this driver as a module, choose M here: the
187	   module will be called imon.
188
189config IR_MCEUSB
190	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
191	depends on USB_ARCH_HAS_HCD
192	depends on RC_CORE
193	select USB
194	---help---
195	   Say Y here if you want to use a Windows Media Center Edition
196	   eHome Infrared Transceiver.
197
198	   To compile this driver as a module, choose M here: the
199	   module will be called mceusb.
200
201config IR_ITE_CIR
202	tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
203	depends on PNP
204	depends on RC_CORE
205	---help---
206	   Say Y here to enable support for integrated infrared receivers
207	   /transceivers made by ITE Tech Inc. These are found in
208	   several ASUS devices, like the ASUS Digimatrix or the ASUS
209	   EEEBox 1501U.
210
211	   To compile this driver as a module, choose M here: the
212	   module will be called ite-cir.
213
214config IR_FINTEK
215	tristate "Fintek Consumer Infrared Transceiver"
216	depends on PNP
217	depends on RC_CORE
218	---help---
219	   Say Y here to enable support for integrated infrared receiver
220	   /transciever made by Fintek. This chip is found on assorted
221	   Jetway motherboards (and of course, possibly others).
222
223	   To compile this driver as a module, choose M here: the
224	   module will be called fintek-cir.
225
226config IR_MESON
227	tristate "Amlogic Meson IR remote receiver"
228	depends on RC_CORE
229	depends on ARCH_MESON || COMPILE_TEST
230	---help---
231	   Say Y if you want to use the IR remote receiver available
232	   on Amlogic Meson SoCs.
233
234	   To compile this driver as a module, choose M here: the
235	   module will be called meson-ir.
236
237config IR_NUVOTON
238	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
239	depends on PNP
240	depends on RC_CORE
241	---help---
242	   Say Y here to enable support for integrated infrared receiver
243	   /transciever made by Nuvoton (formerly Winbond). This chip is
244	   found in the ASRock ION 330HT, as well as assorted Intel
245	   DP55-series motherboards (and of course, possibly others).
246
247	   To compile this driver as a module, choose M here: the
248	   module will be called nuvoton-cir.
249
250config IR_REDRAT3
251	tristate "RedRat3 IR Transceiver"
252	depends on USB_ARCH_HAS_HCD
253	depends on RC_CORE
254	select NEW_LEDS
255	select LEDS_CLASS
256	select USB
257	---help---
258	   Say Y here if you want to use a RedRat3 Infrared Transceiver.
259
260	   To compile this driver as a module, choose M here: the
261	   module will be called redrat3.
262
263config IR_STREAMZAP
264	tristate "Streamzap PC Remote IR Receiver"
265	depends on USB_ARCH_HAS_HCD
266	depends on RC_CORE
267	select USB
268	---help---
269	   Say Y here if you want to use a Streamzap PC Remote
270	   Infrared Receiver.
271
272	   To compile this driver as a module, choose M here: the
273	   module will be called streamzap.
274
275config IR_WINBOND_CIR
276	tristate "Winbond IR remote control"
277	depends on X86 && PNP
278	depends on RC_CORE
279	select NEW_LEDS
280	select LEDS_CLASS
281	select BITREVERSE
282	---help---
283	   Say Y here if you want to use the IR remote functionality found
284	   in some Winbond SuperI/O chips. Currently only the WPCD376I
285	   chip is supported (included in some Intel Media series
286	   motherboards).
287
288	   To compile this driver as a module, choose M here: the module will
289	   be called winbond_cir.
290
291config IR_IGORPLUGUSB
292	tristate "IgorPlug-USB IR Receiver"
293	depends on USB_ARCH_HAS_HCD
294	depends on RC_CORE
295	select USB
296	---help---
297	   Say Y here if you want to use the IgorPlug-USB IR Receiver by
298	   Igor Cesko. This device is included on the Fit-PC2.
299
300	   Note that this device can only record bursts of 36 IR pulses and
301	   spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
302
303	   To compile this driver as a module, choose M here: the module will
304	   be called igorplugusb.
305
306config IR_IGUANA
307	tristate "IguanaWorks USB IR Transceiver"
308	depends on USB_ARCH_HAS_HCD
309	depends on RC_CORE
310	select USB
311	---help---
312	   Say Y here if you want to use the IguanaWorks USB IR Transceiver.
313	   Both infrared receive and send are supported. If you want to
314	   change the ID or the pin config, use the user space driver from
315	   IguanaWorks.
316
317	   Only firmware 0x0205 and later is supported.
318
319	   To compile this driver as a module, choose M here: the module will
320	   be called iguanair.
321
322config IR_TTUSBIR
323	tristate "TechnoTrend USB IR Receiver"
324	depends on USB_ARCH_HAS_HCD
325	depends on RC_CORE
326	select USB
327	select NEW_LEDS
328	select LEDS_CLASS
329	---help---
330	   Say Y here if you want to use the TechnoTrend USB IR Receiver. The
331	   driver can control the led.
332
333	   To compile this driver as a module, choose M here: the module will
334	   be called ttusbir.
335
336config IR_RX51
337	tristate "Nokia N900 IR transmitter diode"
338	depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
339	---help---
340	   Say Y or M here if you want to enable support for the IR
341	   transmitter diode built in the Nokia N900 (RX51) device.
342
343	   The driver uses omap DM timers for generating the carrier
344	   wave and pulses.
345
346source "drivers/media/rc/img-ir/Kconfig"
347
348config RC_LOOPBACK
349	tristate "Remote Control Loopback Driver"
350	depends on RC_CORE
351	---help---
352	   Say Y here if you want support for the remote control loopback
353	   driver which allows TX data to be sent back as RX data.
354	   This is mostly useful for debugging purposes.
355
356	   If you're not sure, select N here.
357
358	   To compile this driver as a module, choose M here: the module will
359	   be called rc_loopback.
360
361config IR_GPIO_CIR
362	tristate "GPIO IR remote control"
363	depends on RC_CORE
364	---help---
365	   Say Y if you want to use GPIO based IR Receiver.
366
367	   To compile this driver as a module, choose M here: the module will
368	   be called gpio-ir-recv.
369
370config RC_ST
371	tristate "ST remote control receiver"
372	depends on RC_CORE
373	depends on ARCH_STI || COMPILE_TEST
374	---help---
375	   Say Y here if you want support for ST remote control driver
376	   which allows both IR and UHF RX.
377	   The driver passes raw pulse and space information to the LIRC decoder.
378
379	   If you're not sure, select N here.
380
381config IR_SUNXI
382	tristate "SUNXI IR remote control"
383	depends on RC_CORE
384	depends on ARCH_SUNXI || COMPILE_TEST
385	---help---
386	   Say Y if you want to use sunXi internal IR Controller
387
388	   To compile this driver as a module, choose M here: the module will
389	   be called sunxi-ir.
390
391endif #RC_DEVICES
392