1 /* -*- linux-c -*-
2
3 GTCO digitizer USB driver
4
5 TO CHECK: Is pressure done right on report 5?
6
7 Copyright (C) 2006 GTCO CalComp
8
9 This program is free software; you can redistribute it and/or
10 modify it under the terms of the GNU General Public License
11 as published by the Free Software Foundation; version 2
12 of the License.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
22
23 Permission to use, copy, modify, distribute, and sell this software and its
24 documentation for any purpose is hereby granted without fee, provided that
25 the above copyright notice appear in all copies and that both that
26 copyright notice and this permission notice appear in supporting
27 documentation, and that the name of GTCO-CalComp not be used in advertising
28 or publicity pertaining to distribution of the software without specific,
29 written prior permission. GTCO-CalComp makes no representations about the
30 suitability of this software for any purpose. It is provided "as is"
31 without express or implied warranty.
32
33 GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
34 INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
35 EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR
36 CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
37 DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
38 TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
39 PERFORMANCE OF THIS SOFTWARE.
40
41 GTCO CalComp, Inc.
42 7125 Riverwood Drive
43 Columbia, MD 21046
44
45 Jeremy Roberson jroberson@gtcocalcomp.com
46 Scott Hill shill@gtcocalcomp.com
47 */
48
49
50
51 /*#define DEBUG*/
52
53 #include <linux/kernel.h>
54 #include <linux/module.h>
55 #include <linux/errno.h>
56 #include <linux/slab.h>
57 #include <linux/input.h>
58 #include <linux/usb.h>
59 #include <asm/uaccess.h>
60 #include <asm/unaligned.h>
61 #include <asm/byteorder.h>
62 #include <linux/bitops.h>
63
64 #include <linux/usb/input.h>
65
66 /* Version with a Major number of 2 is for kernel inclusion only. */
67 #define GTCO_VERSION "2.00.0006"
68
69
70 /* MACROS */
71
72 #define VENDOR_ID_GTCO 0x078C
73 #define PID_400 0x400
74 #define PID_401 0x401
75 #define PID_1000 0x1000
76 #define PID_1001 0x1001
77 #define PID_1002 0x1002
78
79 /* Max size of a single report */
80 #define REPORT_MAX_SIZE 10
81
82
83 /* Bitmask whether pen is in range */
84 #define MASK_INRANGE 0x20
85 #define MASK_BUTTON 0x01F
86
87 #define PATHLENGTH 64
88
89 /* DATA STRUCTURES */
90
91 /* Device table */
92 static const struct usb_device_id gtco_usbid_table[] = {
93 { USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
94 { USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
95 { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
96 { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) },
97 { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) },
98 { }
99 };
100 MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
101
102
103 /* Structure to hold all of our device specific stuff */
104 struct gtco {
105
106 struct input_dev *inputdevice; /* input device struct pointer */
107 struct usb_device *usbdev; /* the usb device for this device */
108 struct usb_interface *intf; /* the usb interface for this device */
109 struct urb *urbinfo; /* urb for incoming reports */
110 dma_addr_t buf_dma; /* dma addr of the data buffer*/
111 unsigned char * buffer; /* databuffer for reports */
112
113 char usbpath[PATHLENGTH];
114 int openCount;
115
116 /* Information pulled from Report Descriptor */
117 u32 usage;
118 u32 min_X;
119 u32 max_X;
120 u32 min_Y;
121 u32 max_Y;
122 s8 mintilt_X;
123 s8 maxtilt_X;
124 s8 mintilt_Y;
125 s8 maxtilt_Y;
126 u32 maxpressure;
127 u32 minpressure;
128 };
129
130
131
132 /* Code for parsing the HID REPORT DESCRIPTOR */
133
134 /* From HID1.11 spec */
135 struct hid_descriptor
136 {
137 struct usb_descriptor_header header;
138 __le16 bcdHID;
139 u8 bCountryCode;
140 u8 bNumDescriptors;
141 u8 bDescriptorType;
142 __le16 wDescriptorLength;
143 } __attribute__ ((packed));
144
145
146 #define HID_DESCRIPTOR_SIZE 9
147 #define HID_DEVICE_TYPE 33
148 #define REPORT_DEVICE_TYPE 34
149
150
151 #define PREF_TAG(x) ((x)>>4)
152 #define PREF_TYPE(x) ((x>>2)&0x03)
153 #define PREF_SIZE(x) ((x)&0x03)
154
155 #define TYPE_MAIN 0
156 #define TYPE_GLOBAL 1
157 #define TYPE_LOCAL 2
158 #define TYPE_RESERVED 3
159
160 #define TAG_MAIN_INPUT 0x8
161 #define TAG_MAIN_OUTPUT 0x9
162 #define TAG_MAIN_FEATURE 0xB
163 #define TAG_MAIN_COL_START 0xA
164 #define TAG_MAIN_COL_END 0xC
165
166 #define TAG_GLOB_USAGE 0
167 #define TAG_GLOB_LOG_MIN 1
168 #define TAG_GLOB_LOG_MAX 2
169 #define TAG_GLOB_PHYS_MIN 3
170 #define TAG_GLOB_PHYS_MAX 4
171 #define TAG_GLOB_UNIT_EXP 5
172 #define TAG_GLOB_UNIT 6
173 #define TAG_GLOB_REPORT_SZ 7
174 #define TAG_GLOB_REPORT_ID 8
175 #define TAG_GLOB_REPORT_CNT 9
176 #define TAG_GLOB_PUSH 10
177 #define TAG_GLOB_POP 11
178
179 #define TAG_GLOB_MAX 12
180
181 #define DIGITIZER_USAGE_TIP_PRESSURE 0x30
182 #define DIGITIZER_USAGE_TILT_X 0x3D
183 #define DIGITIZER_USAGE_TILT_Y 0x3E
184
185
186 /*
187 * This is an abbreviated parser for the HID Report Descriptor. We
188 * know what devices we are talking to, so this is by no means meant
189 * to be generic. We can make some safe assumptions:
190 *
191 * - We know there are no LONG tags, all short
192 * - We know that we have no MAIN Feature and MAIN Output items
193 * - We know what the IRQ reports are supposed to look like.
194 *
195 * The main purpose of this is to use the HID report desc to figure
196 * out the mins and maxs of the fields in the IRQ reports. The IRQ
197 * reports for 400/401 change slightly if the max X is bigger than 64K.
198 *
199 */
parse_hid_report_descriptor(struct gtco * device,char * report,int length)200 static void parse_hid_report_descriptor(struct gtco *device, char * report,
201 int length)
202 {
203 struct device *ddev = &device->intf->dev;
204 int x, i = 0;
205
206 /* Tag primitive vars */
207 __u8 prefix;
208 __u8 size;
209 __u8 tag;
210 __u8 type;
211 __u8 data = 0;
212 __u16 data16 = 0;
213 __u32 data32 = 0;
214
215 /* For parsing logic */
216 int inputnum = 0;
217 __u32 usage = 0;
218
219 /* Global Values, indexed by TAG */
220 __u32 globalval[TAG_GLOB_MAX];
221 __u32 oldval[TAG_GLOB_MAX];
222
223 /* Debug stuff */
224 char maintype = 'x';
225 char globtype[12];
226 int indent = 0;
227 char indentstr[10] = "";
228
229
230 dev_dbg(ddev, "======>>>>>>PARSE<<<<<<======\n");
231
232 /* Walk this report and pull out the info we need */
233 while (i < length) {
234 prefix = report[i];
235
236 /* Skip over prefix */
237 i++;
238
239 /* Determine data size and save the data in the proper variable */
240 size = PREF_SIZE(prefix);
241 switch (size) {
242 case 1:
243 data = report[i];
244 break;
245 case 2:
246 data16 = get_unaligned_le16(&report[i]);
247 break;
248 case 3:
249 size = 4;
250 data32 = get_unaligned_le32(&report[i]);
251 break;
252 }
253
254 /* Skip size of data */
255 i += size;
256
257 /* What we do depends on the tag type */
258 tag = PREF_TAG(prefix);
259 type = PREF_TYPE(prefix);
260 switch (type) {
261 case TYPE_MAIN:
262 strcpy(globtype, "");
263 switch (tag) {
264
265 case TAG_MAIN_INPUT:
266 /*
267 * The INPUT MAIN tag signifies this is
268 * information from a report. We need to
269 * figure out what it is and store the
270 * min/max values
271 */
272
273 maintype = 'I';
274 if (data == 2)
275 strcpy(globtype, "Variable");
276 else if (data == 3)
277 strcpy(globtype, "Var|Const");
278
279 dev_dbg(ddev, "::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits\n",
280 globalval[TAG_GLOB_REPORT_ID], inputnum,
281 globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
282 globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
283 globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
284
285
286 /*
287 We can assume that the first two input items
288 are always the X and Y coordinates. After
289 that, we look for everything else by
290 local usage value
291 */
292 switch (inputnum) {
293 case 0: /* X coord */
294 dev_dbg(ddev, "GER: X Usage: 0x%x\n", usage);
295 if (device->max_X == 0) {
296 device->max_X = globalval[TAG_GLOB_LOG_MAX];
297 device->min_X = globalval[TAG_GLOB_LOG_MIN];
298 }
299 break;
300
301 case 1: /* Y coord */
302 dev_dbg(ddev, "GER: Y Usage: 0x%x\n", usage);
303 if (device->max_Y == 0) {
304 device->max_Y = globalval[TAG_GLOB_LOG_MAX];
305 device->min_Y = globalval[TAG_GLOB_LOG_MIN];
306 }
307 break;
308
309 default:
310 /* Tilt X */
311 if (usage == DIGITIZER_USAGE_TILT_X) {
312 if (device->maxtilt_X == 0) {
313 device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
314 device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
315 }
316 }
317
318 /* Tilt Y */
319 if (usage == DIGITIZER_USAGE_TILT_Y) {
320 if (device->maxtilt_Y == 0) {
321 device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
322 device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
323 }
324 }
325
326 /* Pressure */
327 if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
328 if (device->maxpressure == 0) {
329 device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
330 device->minpressure = globalval[TAG_GLOB_LOG_MIN];
331 }
332 }
333
334 break;
335 }
336
337 inputnum++;
338 break;
339
340 case TAG_MAIN_OUTPUT:
341 maintype = 'O';
342 break;
343
344 case TAG_MAIN_FEATURE:
345 maintype = 'F';
346 break;
347
348 case TAG_MAIN_COL_START:
349 maintype = 'S';
350
351 if (data == 0) {
352 dev_dbg(ddev, "======>>>>>> Physical\n");
353 strcpy(globtype, "Physical");
354 } else
355 dev_dbg(ddev, "======>>>>>>\n");
356
357 /* Indent the debug output */
358 indent++;
359 for (x = 0; x < indent; x++)
360 indentstr[x] = '-';
361 indentstr[x] = 0;
362
363 /* Save global tags */
364 for (x = 0; x < TAG_GLOB_MAX; x++)
365 oldval[x] = globalval[x];
366
367 break;
368
369 case TAG_MAIN_COL_END:
370 dev_dbg(ddev, "<<<<<<======\n");
371 maintype = 'E';
372 indent--;
373 for (x = 0; x < indent; x++)
374 indentstr[x] = '-';
375 indentstr[x] = 0;
376
377 /* Copy global tags back */
378 for (x = 0; x < TAG_GLOB_MAX; x++)
379 globalval[x] = oldval[x];
380
381 break;
382 }
383
384 switch (size) {
385 case 1:
386 dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
387 indentstr, tag, maintype, size, globtype, data);
388 break;
389
390 case 2:
391 dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
392 indentstr, tag, maintype, size, globtype, data16);
393 break;
394
395 case 4:
396 dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
397 indentstr, tag, maintype, size, globtype, data32);
398 break;
399 }
400 break;
401
402 case TYPE_GLOBAL:
403 switch (tag) {
404 case TAG_GLOB_USAGE:
405 /*
406 * First time we hit the global usage tag,
407 * it should tell us the type of device
408 */
409 if (device->usage == 0)
410 device->usage = data;
411
412 strcpy(globtype, "USAGE");
413 break;
414
415 case TAG_GLOB_LOG_MIN:
416 strcpy(globtype, "LOG_MIN");
417 break;
418
419 case TAG_GLOB_LOG_MAX:
420 strcpy(globtype, "LOG_MAX");
421 break;
422
423 case TAG_GLOB_PHYS_MIN:
424 strcpy(globtype, "PHYS_MIN");
425 break;
426
427 case TAG_GLOB_PHYS_MAX:
428 strcpy(globtype, "PHYS_MAX");
429 break;
430
431 case TAG_GLOB_UNIT_EXP:
432 strcpy(globtype, "EXP");
433 break;
434
435 case TAG_GLOB_UNIT:
436 strcpy(globtype, "UNIT");
437 break;
438
439 case TAG_GLOB_REPORT_SZ:
440 strcpy(globtype, "REPORT_SZ");
441 break;
442
443 case TAG_GLOB_REPORT_ID:
444 strcpy(globtype, "REPORT_ID");
445 /* New report, restart numbering */
446 inputnum = 0;
447 break;
448
449 case TAG_GLOB_REPORT_CNT:
450 strcpy(globtype, "REPORT_CNT");
451 break;
452
453 case TAG_GLOB_PUSH:
454 strcpy(globtype, "PUSH");
455 break;
456
457 case TAG_GLOB_POP:
458 strcpy(globtype, "POP");
459 break;
460 }
461
462 /* Check to make sure we have a good tag number
463 so we don't overflow array */
464 if (tag < TAG_GLOB_MAX) {
465 switch (size) {
466 case 1:
467 dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
468 indentstr, globtype, tag, size, data);
469 globalval[tag] = data;
470 break;
471
472 case 2:
473 dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
474 indentstr, globtype, tag, size, data16);
475 globalval[tag] = data16;
476 break;
477
478 case 4:
479 dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
480 indentstr, globtype, tag, size, data32);
481 globalval[tag] = data32;
482 break;
483 }
484 } else {
485 dev_dbg(ddev, "%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d\n",
486 indentstr, tag, size);
487 }
488 break;
489
490 case TYPE_LOCAL:
491 switch (tag) {
492 case TAG_GLOB_USAGE:
493 strcpy(globtype, "USAGE");
494 /* Always 1 byte */
495 usage = data;
496 break;
497
498 case TAG_GLOB_LOG_MIN:
499 strcpy(globtype, "MIN");
500 break;
501
502 case TAG_GLOB_LOG_MAX:
503 strcpy(globtype, "MAX");
504 break;
505
506 default:
507 strcpy(globtype, "UNKNOWN");
508 break;
509 }
510
511 switch (size) {
512 case 1:
513 dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
514 indentstr, tag, globtype, size, data);
515 break;
516
517 case 2:
518 dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
519 indentstr, tag, globtype, size, data16);
520 break;
521
522 case 4:
523 dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
524 indentstr, tag, globtype, size, data32);
525 break;
526 }
527
528 break;
529 }
530 }
531 }
532
533 /* INPUT DRIVER Routines */
534
535 /*
536 * Called when opening the input device. This will submit the URB to
537 * the usb system so we start getting reports
538 */
gtco_input_open(struct input_dev * inputdev)539 static int gtco_input_open(struct input_dev *inputdev)
540 {
541 struct gtco *device = input_get_drvdata(inputdev);
542
543 device->urbinfo->dev = device->usbdev;
544 if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
545 return -EIO;
546
547 return 0;
548 }
549
550 /*
551 * Called when closing the input device. This will unlink the URB
552 */
gtco_input_close(struct input_dev * inputdev)553 static void gtco_input_close(struct input_dev *inputdev)
554 {
555 struct gtco *device = input_get_drvdata(inputdev);
556
557 usb_kill_urb(device->urbinfo);
558 }
559
560
561 /*
562 * Setup input device capabilities. Tell the input system what this
563 * device is capable of generating.
564 *
565 * This information is based on what is read from the HID report and
566 * placed in the struct gtco structure
567 *
568 */
gtco_setup_caps(struct input_dev * inputdev)569 static void gtco_setup_caps(struct input_dev *inputdev)
570 {
571 struct gtco *device = input_get_drvdata(inputdev);
572
573 /* Which events */
574 inputdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
575 BIT_MASK(EV_MSC);
576
577 /* Misc event menu block */
578 inputdev->mscbit[0] = BIT_MASK(MSC_SCAN) | BIT_MASK(MSC_SERIAL) |
579 BIT_MASK(MSC_RAW);
580
581 /* Absolute values based on HID report info */
582 input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
583 0, 0);
584 input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y,
585 0, 0);
586
587 /* Proximity */
588 input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0);
589
590 /* Tilt & pressure */
591 input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X,
592 device->maxtilt_X, 0, 0);
593 input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y,
594 device->maxtilt_Y, 0, 0);
595 input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
596 device->maxpressure, 0, 0);
597
598 /* Transducer */
599 input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0);
600 }
601
602 /* USB Routines */
603
604 /*
605 * URB callback routine. Called when we get IRQ reports from the
606 * digitizer.
607 *
608 * This bridges the USB and input device worlds. It generates events
609 * on the input device based on the USB reports.
610 */
gtco_urb_callback(struct urb * urbinfo)611 static void gtco_urb_callback(struct urb *urbinfo)
612 {
613 struct gtco *device = urbinfo->context;
614 struct input_dev *inputdev;
615 int rc;
616 u32 val = 0;
617 char le_buffer[2];
618
619 inputdev = device->inputdevice;
620
621 /* Was callback OK? */
622 if (urbinfo->status == -ECONNRESET ||
623 urbinfo->status == -ENOENT ||
624 urbinfo->status == -ESHUTDOWN) {
625
626 /* Shutdown is occurring. Return and don't queue up any more */
627 return;
628 }
629
630 if (urbinfo->status != 0) {
631 /*
632 * Some unknown error. Hopefully temporary. Just go and
633 * requeue an URB
634 */
635 goto resubmit;
636 }
637
638 /*
639 * Good URB, now process
640 */
641
642 /* PID dependent when we interpret the report */
643 if (inputdev->id.product == PID_1000 ||
644 inputdev->id.product == PID_1001 ||
645 inputdev->id.product == PID_1002) {
646
647 /*
648 * Switch on the report ID
649 * Conveniently, the reports have more information, the higher
650 * the report number. We can just fall through the case
651 * statements if we start with the highest number report
652 */
653 switch (device->buffer[0]) {
654 case 5:
655 /* Pressure is 9 bits */
656 val = ((u16)(device->buffer[8]) << 1);
657 val |= (u16)(device->buffer[7] >> 7);
658 input_report_abs(inputdev, ABS_PRESSURE,
659 device->buffer[8]);
660
661 /* Mask out the Y tilt value used for pressure */
662 device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
663
664 /* Fall thru */
665 case 4:
666 /* Tilt */
667 input_report_abs(inputdev, ABS_TILT_X,
668 sign_extend32(device->buffer[6], 6));
669
670 input_report_abs(inputdev, ABS_TILT_Y,
671 sign_extend32(device->buffer[7], 6));
672
673 /* Fall thru */
674 case 2:
675 case 3:
676 /* Convert buttons, only 5 bits possible */
677 val = (device->buffer[5]) & MASK_BUTTON;
678
679 /* We don't apply any meaning to the bitmask,
680 just report */
681 input_event(inputdev, EV_MSC, MSC_SERIAL, val);
682
683 /* Fall thru */
684 case 1:
685 /* All reports have X and Y coords in the same place */
686 val = get_unaligned_le16(&device->buffer[1]);
687 input_report_abs(inputdev, ABS_X, val);
688
689 val = get_unaligned_le16(&device->buffer[3]);
690 input_report_abs(inputdev, ABS_Y, val);
691
692 /* Ditto for proximity bit */
693 val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
694 input_report_abs(inputdev, ABS_DISTANCE, val);
695
696 /* Report 1 is an exception to how we handle buttons */
697 /* Buttons are an index, not a bitmask */
698 if (device->buffer[0] == 1) {
699
700 /*
701 * Convert buttons, 5 bit index
702 * Report value of index set as one,
703 * the rest as 0
704 */
705 val = device->buffer[5] & MASK_BUTTON;
706 dev_dbg(&device->intf->dev,
707 "======>>>>>>REPORT 1: val 0x%X(%d)\n",
708 val, val);
709
710 /*
711 * We don't apply any meaning to the button
712 * index, just report it
713 */
714 input_event(inputdev, EV_MSC, MSC_SERIAL, val);
715 }
716 break;
717
718 case 7:
719 /* Menu blocks */
720 input_event(inputdev, EV_MSC, MSC_SCAN,
721 device->buffer[1]);
722 break;
723 }
724 }
725
726 /* Other pid class */
727 if (inputdev->id.product == PID_400 ||
728 inputdev->id.product == PID_401) {
729
730 /* Report 2 */
731 if (device->buffer[0] == 2) {
732 /* Menu blocks */
733 input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
734 }
735
736 /* Report 1 */
737 if (device->buffer[0] == 1) {
738 char buttonbyte;
739
740 /* IF X max > 64K, we still a bit from the y report */
741 if (device->max_X > 0x10000) {
742
743 val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
744 val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
745
746 input_report_abs(inputdev, ABS_X, val);
747
748 le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1);
749 le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
750
751 le_buffer[1] = (u8)(device->buffer[4] >> 1);
752 le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
753
754 val = get_unaligned_le16(le_buffer);
755 input_report_abs(inputdev, ABS_Y, val);
756
757 /*
758 * Shift the button byte right by one to
759 * make it look like the standard report
760 */
761 buttonbyte = device->buffer[5] >> 1;
762 } else {
763
764 val = get_unaligned_le16(&device->buffer[1]);
765 input_report_abs(inputdev, ABS_X, val);
766
767 val = get_unaligned_le16(&device->buffer[3]);
768 input_report_abs(inputdev, ABS_Y, val);
769
770 buttonbyte = device->buffer[5];
771 }
772
773 /* BUTTONS and PROXIMITY */
774 val = buttonbyte & MASK_INRANGE ? 1 : 0;
775 input_report_abs(inputdev, ABS_DISTANCE, val);
776
777 /* Convert buttons, only 4 bits possible */
778 val = buttonbyte & 0x0F;
779 #ifdef USE_BUTTONS
780 for (i = 0; i < 5; i++)
781 input_report_key(inputdev, BTN_DIGI + i, val & (1 << i));
782 #else
783 /* We don't apply any meaning to the bitmask, just report */
784 input_event(inputdev, EV_MSC, MSC_SERIAL, val);
785 #endif
786
787 /* TRANSDUCER */
788 input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
789 }
790 }
791
792 /* Everybody gets report ID's */
793 input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]);
794
795 /* Sync it up */
796 input_sync(inputdev);
797
798 resubmit:
799 rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
800 if (rc != 0)
801 dev_err(&device->intf->dev,
802 "usb_submit_urb failed rc=0x%x\n", rc);
803 }
804
805 /*
806 * The probe routine. This is called when the kernel find the matching USB
807 * vendor/product. We do the following:
808 *
809 * - Allocate mem for a local structure to manage the device
810 * - Request a HID Report Descriptor from the device and parse it to
811 * find out the device parameters
812 * - Create an input device and assign it attributes
813 * - Allocate an URB so the device can talk to us when the input
814 * queue is open
815 */
gtco_probe(struct usb_interface * usbinterface,const struct usb_device_id * id)816 static int gtco_probe(struct usb_interface *usbinterface,
817 const struct usb_device_id *id)
818 {
819
820 struct gtco *gtco;
821 struct input_dev *input_dev;
822 struct hid_descriptor *hid_desc;
823 char *report;
824 int result = 0, retry;
825 int error;
826 struct usb_endpoint_descriptor *endpoint;
827
828 /* Allocate memory for device structure */
829 gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
830 input_dev = input_allocate_device();
831 if (!gtco || !input_dev) {
832 dev_err(&usbinterface->dev, "No more memory\n");
833 error = -ENOMEM;
834 goto err_free_devs;
835 }
836
837 /* Set pointer to the input device */
838 gtco->inputdevice = input_dev;
839
840 /* Save interface information */
841 gtco->usbdev = interface_to_usbdev(usbinterface);
842 gtco->intf = usbinterface;
843
844 /* Allocate some data for incoming reports */
845 gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE,
846 GFP_KERNEL, >co->buf_dma);
847 if (!gtco->buffer) {
848 dev_err(&usbinterface->dev, "No more memory for us buffers\n");
849 error = -ENOMEM;
850 goto err_free_devs;
851 }
852
853 /* Allocate URB for reports */
854 gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
855 if (!gtco->urbinfo) {
856 dev_err(&usbinterface->dev, "Failed to allocate URB\n");
857 error = -ENOMEM;
858 goto err_free_buf;
859 }
860
861 /* Sanity check that a device has an endpoint */
862 if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
863 dev_err(&usbinterface->dev,
864 "Invalid number of endpoints\n");
865 error = -EINVAL;
866 goto err_free_urb;
867 }
868
869 /*
870 * The endpoint is always altsetting 0, we know this since we know
871 * this device only has one interrupt endpoint
872 */
873 endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
874
875 /* Some debug */
876 dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
877 dev_dbg(&usbinterface->dev, "num endpoints: %d\n", usbinterface->cur_altsetting->desc.bNumEndpoints);
878 dev_dbg(&usbinterface->dev, "interface class: %d\n", usbinterface->cur_altsetting->desc.bInterfaceClass);
879 dev_dbg(&usbinterface->dev, "endpoint: attribute:0x%x type:0x%x\n", endpoint->bmAttributes, endpoint->bDescriptorType);
880 if (usb_endpoint_xfer_int(endpoint))
881 dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n");
882
883 dev_dbg(&usbinterface->dev, "endpoint extra len:%d\n", usbinterface->altsetting[0].extralen);
884
885 /*
886 * Find the HID descriptor so we can find out the size of the
887 * HID report descriptor
888 */
889 if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
890 HID_DEVICE_TYPE, &hid_desc) != 0) {
891 dev_err(&usbinterface->dev,
892 "Can't retrieve exta USB descriptor to get hid report descriptor length\n");
893 error = -EIO;
894 goto err_free_urb;
895 }
896
897 dev_dbg(&usbinterface->dev,
898 "Extra descriptor success: type:%d len:%d\n",
899 hid_desc->bDescriptorType, hid_desc->wDescriptorLength);
900
901 report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL);
902 if (!report) {
903 dev_err(&usbinterface->dev, "No more memory for report\n");
904 error = -ENOMEM;
905 goto err_free_urb;
906 }
907
908 /* Couple of tries to get reply */
909 for (retry = 0; retry < 3; retry++) {
910 result = usb_control_msg(gtco->usbdev,
911 usb_rcvctrlpipe(gtco->usbdev, 0),
912 USB_REQ_GET_DESCRIPTOR,
913 USB_RECIP_INTERFACE | USB_DIR_IN,
914 REPORT_DEVICE_TYPE << 8,
915 0, /* interface */
916 report,
917 le16_to_cpu(hid_desc->wDescriptorLength),
918 5000); /* 5 secs */
919
920 dev_dbg(&usbinterface->dev, "usb_control_msg result: %d\n", result);
921 if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
922 parse_hid_report_descriptor(gtco, report, result);
923 break;
924 }
925 }
926
927 kfree(report);
928
929 /* If we didn't get the report, fail */
930 if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
931 dev_err(&usbinterface->dev,
932 "Failed to get HID Report Descriptor of size: %d\n",
933 hid_desc->wDescriptorLength);
934 error = -EIO;
935 goto err_free_urb;
936 }
937
938 /* Create a device file node */
939 usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
940 strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
941
942 /* Set Input device functions */
943 input_dev->open = gtco_input_open;
944 input_dev->close = gtco_input_close;
945
946 /* Set input device information */
947 input_dev->name = "GTCO_CalComp";
948 input_dev->phys = gtco->usbpath;
949
950 input_set_drvdata(input_dev, gtco);
951
952 /* Now set up all the input device capabilities */
953 gtco_setup_caps(input_dev);
954
955 /* Set input device required ID information */
956 usb_to_input_id(gtco->usbdev, &input_dev->id);
957 input_dev->dev.parent = &usbinterface->dev;
958
959 /* Setup the URB, it will be posted later on open of input device */
960 endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
961
962 usb_fill_int_urb(gtco->urbinfo,
963 gtco->usbdev,
964 usb_rcvintpipe(gtco->usbdev,
965 endpoint->bEndpointAddress),
966 gtco->buffer,
967 REPORT_MAX_SIZE,
968 gtco_urb_callback,
969 gtco,
970 endpoint->bInterval);
971
972 gtco->urbinfo->transfer_dma = gtco->buf_dma;
973 gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
974
975 /* Save gtco pointer in USB interface gtco */
976 usb_set_intfdata(usbinterface, gtco);
977
978 /* All done, now register the input device */
979 error = input_register_device(input_dev);
980 if (error)
981 goto err_free_urb;
982
983 return 0;
984
985 err_free_urb:
986 usb_free_urb(gtco->urbinfo);
987 err_free_buf:
988 usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
989 gtco->buffer, gtco->buf_dma);
990 err_free_devs:
991 input_free_device(input_dev);
992 kfree(gtco);
993 return error;
994 }
995
996 /*
997 * This function is a standard USB function called when the USB device
998 * is disconnected. We will get rid of the URV, de-register the input
999 * device, and free up allocated memory
1000 */
gtco_disconnect(struct usb_interface * interface)1001 static void gtco_disconnect(struct usb_interface *interface)
1002 {
1003 /* Grab private device ptr */
1004 struct gtco *gtco = usb_get_intfdata(interface);
1005
1006 /* Now reverse all the registration stuff */
1007 if (gtco) {
1008 input_unregister_device(gtco->inputdevice);
1009 usb_kill_urb(gtco->urbinfo);
1010 usb_free_urb(gtco->urbinfo);
1011 usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
1012 gtco->buffer, gtco->buf_dma);
1013 kfree(gtco);
1014 }
1015
1016 dev_info(&interface->dev, "gtco driver disconnected\n");
1017 }
1018
1019 /* STANDARD MODULE LOAD ROUTINES */
1020
1021 static struct usb_driver gtco_driverinfo_table = {
1022 .name = "gtco",
1023 .id_table = gtco_usbid_table,
1024 .probe = gtco_probe,
1025 .disconnect = gtco_disconnect,
1026 };
1027
1028 module_usb_driver(gtco_driverinfo_table);
1029
1030 MODULE_DESCRIPTION("GTCO digitizer USB driver");
1031 MODULE_LICENSE("GPL");
1032