1#
2# SATA/PATA driver configuration
3#
4
5config HAVE_PATA_PLATFORM
6	bool
7	help
8	  This is an internal configuration node for any machine that
9	  uses pata-platform driver to enable the relevant driver in the
10	  configuration structure without having to submit endless patches
11	  to update the PATA_PLATFORM entry.
12
13menuconfig ATA
14	tristate "Serial ATA and Parallel ATA drivers (libata)"
15	depends on HAS_IOMEM
16	depends on BLOCK
17	depends on !(M32R || M68K || S390) || BROKEN
18	select SCSI
19	select GLOB
20	---help---
21	  If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
22	  any other ATA device under Linux, say Y and make sure that you know
23	  the name of your ATA host adapter (the card inside your computer
24	  that "speaks" the ATA protocol, also called ATA controller),
25	  because you will be asked for it.
26
27	  NOTE: ATA enables basic SCSI support; *however*,
28	  'SCSI disk support', 'SCSI tape support', or
29	  'SCSI CDROM support' may also be needed,
30	  depending on your hardware configuration.
31
32if ATA
33
34config ATA_NONSTANDARD
35       bool
36       default n
37
38config ATA_VERBOSE_ERROR
39	bool "Verbose ATA error reporting"
40	default y
41	help
42	  This option adds parsing of ATA command descriptions and error bits
43	  in libata kernel output, making it easier to interpret.
44	  This option will enlarge the kernel by approx. 6KB. Disable it only
45	  if kernel size is more important than ease of debugging.
46
47	  If unsure, say Y.
48
49config ATA_ACPI
50	bool "ATA ACPI Support"
51	depends on ACPI
52	default y
53	help
54	  This option adds support for ATA-related ACPI objects.
55	  These ACPI objects add the ability to retrieve taskfiles
56	  from the ACPI BIOS and write them to the disk controller.
57	  These objects may be related to performance, security,
58	  power management, or other areas.
59	  You can disable this at kernel boot time by using the
60	  option libata.noacpi=1
61
62config SATA_ZPODD
63	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
64	depends on ATA_ACPI && PM
65	default n
66	help
67	  This option adds support for SATA Zero Power Optical Disc
68	  Drive (ZPODD). It requires both the ODD and the platform
69	  support, and if enabled, will automatically power on/off the
70	  ODD when certain condition is satisfied. This does not impact
71	  end user's experience of the ODD, only power is saved when
72	  the ODD is not in use (i.e. no disc inside).
73
74	  If unsure, say N.
75
76config SATA_PMP
77	bool "SATA Port Multiplier support"
78	default y
79	help
80	  This option adds support for SATA Port Multipliers
81	  (the SATA version of an ethernet hub, or SAS expander).
82
83comment "Controllers with non-SFF native interface"
84
85config SATA_AHCI
86	tristate "AHCI SATA support"
87	depends on PCI
88	help
89	  This option enables support for AHCI Serial ATA.
90
91	  If unsure, say N.
92
93config SATA_AHCI_PLATFORM
94	tristate "Platform AHCI SATA support"
95	help
96	  This option enables support for Platform AHCI Serial ATA
97	  controllers.
98
99	  If unsure, say N.
100
101config AHCI_BRCMSTB
102	tristate "Broadcom STB AHCI SATA support"
103	depends on ARCH_BRCMSTB
104	help
105	  This option enables support for the AHCI SATA3 controller found on
106	  STB SoC's.
107
108	  If unsure, say N.
109
110config AHCI_DA850
111	tristate "DaVinci DA850 AHCI SATA support"
112	depends on ARCH_DAVINCI_DA850
113	help
114	  This option enables support for the DaVinci DA850 SoC's
115	  onboard AHCI SATA.
116
117	  If unsure, say N.
118
119config AHCI_ST
120	tristate "ST AHCI SATA support"
121	depends on ARCH_STI
122	help
123	  This option enables support for ST AHCI SATA controller.
124
125	  If unsure, say N.
126
127config AHCI_IMX
128	tristate "Freescale i.MX AHCI SATA support"
129	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
130	help
131	  This option enables support for the Freescale i.MX SoC's
132	  onboard AHCI SATA.
133
134	  If unsure, say N.
135
136config AHCI_CEVA
137	tristate "CEVA AHCI SATA support"
138	depends on OF
139	help
140	  This option enables support for the CEVA AHCI SATA.
141	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
142
143	  If unsure, say N.
144
145config AHCI_MVEBU
146	tristate "Marvell EBU AHCI SATA support"
147	depends on ARCH_MVEBU
148	help
149	  This option enables support for the Marvebu EBU SoC's
150	  onboard AHCI SATA.
151
152	  If unsure, say N.
153
154config AHCI_SUNXI
155	tristate "Allwinner sunxi AHCI SATA support"
156	depends on ARCH_SUNXI
157	help
158	  This option enables support for the Allwinner sunxi SoC's
159	  onboard AHCI SATA.
160
161	  If unsure, say N.
162
163config AHCI_TEGRA
164	tristate "NVIDIA Tegra124 AHCI SATA support"
165	depends on ARCH_TEGRA
166	help
167	  This option enables support for the NVIDIA Tegra124 SoC's
168	  onboard AHCI SATA.
169
170	  If unsure, say N.
171
172config AHCI_XGENE
173	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
174	depends on PHY_XGENE
175	help
176	 This option enables support for APM X-Gene SoC SATA host controller.
177
178config AHCI_QORIQ
179	tristate "Freescale QorIQ AHCI SATA support"
180	depends on OF
181	help
182	  This option enables support for the Freescale QorIQ AHCI SoC's
183	  onboard AHCI SATA.
184
185	  If unsure, say N.
186
187config SATA_FSL
188	tristate "Freescale 3.0Gbps SATA support"
189	depends on FSL_SOC
190	help
191	  This option enables support for Freescale 3.0Gbps SATA controller.
192	  It can be found on MPC837x and MPC8315.
193
194	  If unsure, say N.
195
196config SATA_INIC162X
197	tristate "Initio 162x SATA support (Very Experimental)"
198	depends on PCI
199	help
200	  This option enables support for Initio 162x Serial ATA.
201
202config SATA_ACARD_AHCI
203	tristate "ACard AHCI variant (ATP 8620)"
204	depends on PCI
205	help
206	  This option enables support for Acard.
207
208	  If unsure, say N.
209
210config SATA_SIL24
211	tristate "Silicon Image 3124/3132 SATA support"
212	depends on PCI
213	help
214	  This option enables support for Silicon Image 3124/3132 Serial ATA.
215
216	  If unsure, say N.
217
218config ATA_SFF
219	bool "ATA SFF support (for legacy IDE and PATA)"
220	default y
221	help
222	  This option adds support for ATA controllers with SFF
223	  compliant or similar programming interface.
224
225	  SFF is the legacy IDE interface that has been around since
226	  the dawn of time.  Almost all PATA controllers have an
227	  SFF interface.  Many SATA controllers have an SFF interface
228	  when configured into a legacy compatibility mode.
229
230	  For users with exclusively modern controllers like AHCI,
231	  Silicon Image 3124, or Marvell 6440, you may choose to
232	  disable this unneeded SFF support.
233
234	  If unsure, say Y.
235
236if ATA_SFF
237
238comment "SFF controllers with custom DMA interface"
239
240config PDC_ADMA
241	tristate "Pacific Digital ADMA support"
242	depends on PCI
243	help
244	  This option enables support for Pacific Digital ADMA controllers
245
246	  If unsure, say N.
247
248config PATA_OCTEON_CF
249	tristate "OCTEON Boot Bus Compact Flash support"
250	depends on CAVIUM_OCTEON_SOC
251	help
252	  This option enables a polled compact flash driver for use with
253	  compact flash cards attached to the OCTEON boot bus.
254
255	  If unsure, say N.
256
257config SATA_QSTOR
258	tristate "Pacific Digital SATA QStor support"
259	depends on PCI
260	help
261	  This option enables support for Pacific Digital Serial ATA QStor.
262
263	  If unsure, say N.
264
265config SATA_SX4
266	tristate "Promise SATA SX4 support (Experimental)"
267	depends on PCI
268	help
269	  This option enables support for Promise Serial ATA SX4.
270
271	  If unsure, say N.
272
273config ATA_BMDMA
274	bool "ATA BMDMA support"
275	default y
276	help
277	  This option adds support for SFF ATA controllers with BMDMA
278	  capability.  BMDMA stands for bus-master DMA and is the
279	  de facto DMA interface for SFF controllers.
280
281	  If unsure, say Y.
282
283if ATA_BMDMA
284
285comment "SATA SFF controllers with BMDMA"
286
287config ATA_PIIX
288	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
289	depends on PCI
290	help
291	  This option enables support for ICH5/6/7/8 Serial ATA
292	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
293	  host controllers.
294
295	  If unsure, say N.
296
297config SATA_DWC
298	tristate "DesignWare Cores SATA support"
299	depends on 460EX
300	select DW_DMAC
301	help
302	  This option enables support for the on-chip SATA controller of the
303	  AppliedMicro processor 460EX.
304
305	  If unsure, say N.
306
307config SATA_DWC_DEBUG
308	bool "Debugging driver version"
309	depends on SATA_DWC
310	help
311	  This option enables debugging output in the driver.
312
313config SATA_DWC_VDEBUG
314	bool "Verbose debug output"
315	depends on SATA_DWC_DEBUG
316	help
317	  This option enables the taskfile dumping and NCQ debugging.
318
319config SATA_HIGHBANK
320	tristate "Calxeda Highbank SATA support"
321	depends on ARCH_HIGHBANK || COMPILE_TEST
322	help
323	  This option enables support for the Calxeda Highbank SoC's
324	  onboard SATA.
325
326	  If unsure, say N.
327
328config SATA_MV
329	tristate "Marvell SATA support"
330	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
331		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
332	select GENERIC_PHY
333	help
334	  This option enables support for the Marvell Serial ATA family.
335	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
336	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
337
338	  If unsure, say N.
339
340config SATA_NV
341	tristate "NVIDIA SATA support"
342	depends on PCI
343	help
344	  This option enables support for NVIDIA Serial ATA.
345
346	  If unsure, say N.
347
348config SATA_PROMISE
349	tristate "Promise SATA TX2/TX4 support"
350	depends on PCI
351	help
352	  This option enables support for Promise Serial ATA TX2/TX4.
353
354	  If unsure, say N.
355
356config SATA_RCAR
357	tristate "Renesas R-Car SATA support"
358	depends on ARCH_SHMOBILE || COMPILE_TEST
359	help
360	  This option enables support for Renesas R-Car Serial ATA.
361
362	  If unsure, say N.
363
364config SATA_SIL
365	tristate "Silicon Image SATA support"
366	depends on PCI
367	help
368	  This option enables support for Silicon Image Serial ATA.
369
370	  If unsure, say N.
371
372config SATA_SIS
373	tristate "SiS 964/965/966/180 SATA support"
374	depends on PCI
375	select PATA_SIS
376	help
377	  This option enables support for SiS Serial ATA on
378	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
379	  The PATA support for SiS 180 requires additionally to
380	  enable the PATA_SIS driver in the config.
381	  If unsure, say N.
382
383config SATA_SVW
384	tristate "ServerWorks Frodo / Apple K2 SATA support"
385	depends on PCI
386	help
387	  This option enables support for Broadcom/Serverworks/Apple K2
388	  SATA support.
389
390	  If unsure, say N.
391
392config SATA_ULI
393	tristate "ULi Electronics SATA support"
394	depends on PCI
395	help
396	  This option enables support for ULi Electronics SATA.
397
398	  If unsure, say N.
399
400config SATA_VIA
401	tristate "VIA SATA support"
402	depends on PCI
403	help
404	  This option enables support for VIA Serial ATA.
405
406	  If unsure, say N.
407
408config SATA_VITESSE
409	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
410	depends on PCI
411	help
412	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
413
414	  If unsure, say N.
415
416comment "PATA SFF controllers with BMDMA"
417
418config PATA_ALI
419	tristate "ALi PATA support"
420	depends on PCI
421	help
422	  This option enables support for the ALi ATA interfaces
423	  found on the many ALi chipsets.
424
425	  If unsure, say N.
426
427config PATA_AMD
428	tristate "AMD/NVidia PATA support"
429	depends on PCI
430	help
431	  This option enables support for the AMD and NVidia PATA
432	  interfaces found on the chipsets for Athlon/Athlon64.
433
434	  If unsure, say N.
435
436config PATA_ARASAN_CF
437	tristate "ARASAN CompactFlash PATA Controller Support"
438	depends on ARCH_SPEAR13XX || COMPILE_TEST
439	depends on DMADEVICES
440	select DMA_ENGINE
441	help
442	  Say Y here to support the ARASAN CompactFlash PATA controller
443
444config PATA_ARTOP
445	tristate "ARTOP 6210/6260 PATA support"
446	depends on PCI
447	help
448	  This option enables support for ARTOP PATA controllers.
449
450	  If unsure, say N.
451
452config PATA_ATIIXP
453	tristate "ATI PATA support"
454	depends on PCI
455	help
456	  This option enables support for the ATI ATA interfaces
457	  found on the many ATI chipsets.
458
459	  If unsure, say N.
460
461config PATA_ATP867X
462	tristate "ARTOP/Acard ATP867X PATA support"
463	depends on PCI
464	help
465	  This option enables support for ARTOP/Acard ATP867X PATA
466	  controllers.
467
468	  If unsure, say N.
469
470config PATA_BF54X
471	tristate "Blackfin 54x ATAPI support"
472	depends on BF542 || BF548 || BF549
473	help
474	  This option enables support for the built-in ATAPI controller on
475	  Blackfin 54x family chips.
476
477	  If unsure, say N.
478
479config PATA_CMD64X
480	tristate "CMD64x PATA support"
481	depends on PCI
482	help
483	  This option enables support for the CMD64x series chips
484	  except for the CMD640.
485
486	  If unsure, say N.
487
488config PATA_CS5520
489	tristate "CS5510/5520 PATA support"
490	depends on PCI && (X86_32 || COMPILE_TEST)
491	help
492	  This option enables support for the Cyrix 5510/5520
493	  companion chip used with the MediaGX/Geode processor family.
494
495	  If unsure, say N.
496
497config PATA_CS5530
498	tristate "CS5530 PATA support"
499	depends on PCI && (X86_32 || COMPILE_TEST)
500	help
501	  This option enables support for the Cyrix/NatSemi/AMD CS5530
502	  companion chip used with the MediaGX/Geode processor family.
503
504	  If unsure, say N.
505
506config PATA_CS5535
507	tristate "CS5535 PATA support (Experimental)"
508	depends on PCI && X86_32
509	help
510	  This option enables support for the NatSemi/AMD CS5535
511	  companion chip used with the Geode processor family.
512
513	  If unsure, say N.
514
515config PATA_CS5536
516	tristate "CS5536 PATA support"
517	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
518	help
519	  This option enables support for the AMD CS5536
520	  companion chip used with the Geode LX processor family.
521
522	  If unsure, say N.
523
524config PATA_CYPRESS
525	tristate "Cypress CY82C693 PATA support (Very Experimental)"
526	depends on PCI
527	help
528	  This option enables support for the Cypress/Contaq CY82C693
529	  chipset found in some Alpha systems
530
531	  If unsure, say N.
532
533config PATA_EFAR
534	tristate "EFAR SLC90E66 support"
535	depends on PCI
536	help
537	  This option enables support for the EFAR SLC90E66
538	  IDE controller found on some older machines.
539
540	  If unsure, say N.
541
542config PATA_EP93XX
543	tristate "Cirrus Logic EP93xx PATA support"
544	depends on ARCH_EP93XX
545	help
546	  This option enables support for the PATA controller in
547	  the Cirrus Logic EP9312 and EP9315 ARM CPU.
548
549	  If unsure, say N.
550
551config PATA_HPT366
552	tristate "HPT 366/368 PATA support"
553	depends on PCI
554	help
555	  This option enables support for the HPT 366 and 368
556	  PATA controllers via the new ATA layer.
557
558	  If unsure, say N.
559
560config PATA_HPT37X
561	tristate "HPT 370/370A/371/372/374/302 PATA support"
562	depends on PCI
563	help
564	  This option enables support for the majority of the later HPT
565	  PATA controllers via the new ATA layer.
566
567	  If unsure, say N.
568
569config PATA_HPT3X2N
570	tristate "HPT 371N/372N/302N PATA support"
571	depends on PCI
572	help
573	  This option enables support for the N variant HPT PATA
574	  controllers via the new ATA layer.
575
576	  If unsure, say N.
577
578config PATA_HPT3X3
579	tristate "HPT 343/363 PATA support"
580	depends on PCI
581	help
582	  This option enables support for the HPT 343/363
583	  PATA controllers via the new ATA layer
584
585	  If unsure, say N.
586
587config PATA_HPT3X3_DMA
588	bool "HPT 343/363 DMA support"
589	depends on PATA_HPT3X3
590	help
591	  This option enables DMA support for the HPT343/363
592	  controllers. Enable with care as there are still some
593	  problems with DMA on this chipset.
594
595config PATA_ICSIDE
596	tristate "Acorn ICS PATA support"
597	depends on ARM && ARCH_ACORN
598	help
599	  On Acorn systems, say Y here if you wish to use the ICS PATA
600	  interface card.  This is not required for ICS partition support.
601	  If you are unsure, say N to this.
602
603config PATA_IMX
604	tristate "PATA support for Freescale iMX"
605	depends on ARCH_MXC
606	help
607	  This option enables support for the PATA host available on Freescale
608          iMX SoCs.
609
610	  If unsure, say N.
611
612config PATA_IT8213
613	tristate "IT8213 PATA support (Experimental)"
614	depends on PCI
615	help
616	  This option enables support for the ITE 821 PATA
617          controllers via the new ATA layer.
618
619	  If unsure, say N.
620
621config PATA_IT821X
622	tristate "IT8211/2 PATA support"
623	depends on PCI
624	help
625	  This option enables support for the ITE 8211 and 8212
626	  PATA controllers via the new ATA layer, including RAID
627	  mode.
628
629	  If unsure, say N.
630
631config PATA_JMICRON
632	tristate "JMicron PATA support"
633	depends on PCI
634	help
635	  Enable support for the JMicron IDE controller, via the new
636	  ATA layer.
637
638	  If unsure, say N.
639
640config PATA_MACIO
641	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
642	depends on PPC_PMAC
643	help
644	  Most IDE capable PowerMacs have IDE busses driven by a variant
645          of this controller which is part of the Apple chipset used on
646          most PowerMac models. Some models have multiple busses using
647          different chipsets, though generally, MacIO is one of them.
648
649config PATA_MARVELL
650	tristate "Marvell PATA support via legacy mode"
651	depends on PCI
652	help
653	  This option enables limited support for the Marvell 88SE61xx ATA
654	  controllers. If you wish to use only the SATA ports then select
655	  the AHCI driver alone. If you wish to the use the PATA port or
656	  both SATA and PATA include this driver.
657
658	  If unsure, say N.
659
660config PATA_MPC52xx
661	tristate "Freescale MPC52xx SoC internal IDE"
662	depends on PPC_MPC52xx && PPC_BESTCOMM
663	select PPC_BESTCOMM_ATA
664	help
665	  This option enables support for integrated IDE controller
666	  of the Freescale MPC52xx SoC.
667
668	  If unsure, say N.
669
670config PATA_NETCELL
671	tristate "NETCELL Revolution RAID support"
672	depends on PCI
673	help
674	  This option enables support for the Netcell Revolution RAID
675	  PATA controller.
676
677	  If unsure, say N.
678
679config PATA_NINJA32
680	tristate "Ninja32/Delkin Cardbus ATA support"
681	depends on PCI
682	help
683	  This option enables support for the Ninja32, Delkin and
684	  possibly other brands of Cardbus ATA adapter
685
686	  If unsure, say N.
687
688config PATA_NS87415
689	tristate "Nat Semi NS87415 PATA support"
690	depends on PCI
691	help
692	  This option enables support for the National Semiconductor
693	  NS87415 PCI-IDE controller.
694
695	  If unsure, say N.
696
697config PATA_OLDPIIX
698	tristate "Intel PATA old PIIX support"
699	depends on PCI
700	help
701	  This option enables support for early PIIX PATA support.
702
703	  If unsure, say N.
704
705config PATA_OPTIDMA
706	tristate "OPTI FireStar PATA support (Very Experimental)"
707	depends on PCI
708	help
709	  This option enables DMA/PIO support for the later OPTi
710	  controllers found on some old motherboards and in some
711	  laptops.
712
713	  If unsure, say N.
714
715config PATA_PDC2027X
716	tristate "Promise PATA 2027x support"
717	depends on PCI
718	help
719	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
720
721	  If unsure, say N.
722
723config PATA_PDC_OLD
724	tristate "Older Promise PATA controller support"
725	depends on PCI
726	help
727	  This option enables support for the Promise 20246, 20262, 20263,
728	  20265 and 20267 adapters.
729
730	  If unsure, say N.
731
732config PATA_RADISYS
733	tristate "RADISYS 82600 PATA support (Experimental)"
734	depends on PCI
735	help
736	  This option enables support for the RADISYS 82600
737	  PATA controllers via the new ATA layer
738
739	  If unsure, say N.
740
741config PATA_RDC
742	tristate "RDC PATA support"
743	depends on PCI
744	help
745	  This option enables basic support for the later RDC PATA controllers
746	  controllers via the new ATA layer. For the RDC 1010, you need to
747	  enable the IT821X driver instead.
748
749	  If unsure, say N.
750
751config PATA_SC1200
752	tristate "SC1200 PATA support"
753	depends on PCI && (X86_32 || COMPILE_TEST)
754	help
755	  This option enables support for the NatSemi/AMD SC1200 SoC
756	  companion chip used with the Geode processor family.
757
758	  If unsure, say N.
759
760config PATA_SCH
761	tristate "Intel SCH PATA support"
762	depends on PCI
763	help
764	  This option enables support for Intel SCH PATA on the Intel
765	  SCH (US15W, US15L, UL11L) series host controllers.
766
767	  If unsure, say N.
768
769config PATA_SERVERWORKS
770	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
771	depends on PCI
772	help
773	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
774	  HT1000 PATA controllers, via the new ATA layer.
775
776	  If unsure, say N.
777
778config PATA_SIL680
779	tristate "CMD / Silicon Image 680 PATA support"
780	depends on PCI
781	help
782	  This option enables support for CMD / Silicon Image 680 PATA.
783
784	  If unsure, say N.
785
786config PATA_SIS
787	tristate "SiS PATA support"
788	depends on PCI
789	help
790	  This option enables support for SiS PATA controllers
791
792	  If unsure, say N.
793
794config PATA_TOSHIBA
795	tristate "Toshiba Piccolo support (Experimental)"
796	depends on PCI
797	help
798	  Support for the Toshiba Piccolo controllers. Currently only the
799	  primary channel is supported by this driver.
800
801	  If unsure, say N.
802
803config PATA_TRIFLEX
804	tristate "Compaq Triflex PATA support"
805	depends on PCI
806	help
807	  Enable support for the Compaq 'Triflex' IDE controller as found
808	  on many Compaq Pentium-Pro systems, via the new ATA layer.
809
810	  If unsure, say N.
811
812config PATA_VIA
813	tristate "VIA PATA support"
814	depends on PCI
815	help
816	  This option enables support for the VIA PATA interfaces
817	  found on the many VIA chipsets.
818
819	  If unsure, say N.
820
821config PATA_PXA
822	tristate "PXA DMA-capable PATA support"
823	depends on ARCH_PXA
824	help
825	  This option enables support for harddrive attached to PXA CPU's bus.
826
827	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
828	        is not capable of doing MWDMA, use pata_platform instead.
829
830	  If unsure, say N.
831
832config PATA_WINBOND
833	tristate "Winbond SL82C105 PATA support"
834	depends on PCI
835	help
836	  This option enables support for SL82C105 PATA devices found in the
837	  Netwinder and some other systems
838
839	  If unsure, say N.
840
841endif # ATA_BMDMA
842
843comment "PIO-only SFF controllers"
844
845config PATA_AT32
846	tristate "Atmel AVR32 PATA support (Experimental)"
847	depends on AVR32 && PLATFORM_AT32AP
848	help
849	  This option enables support for the IDE devices on the
850	  Atmel AT32AP platform.
851
852	  If unsure, say N.
853
854config PATA_AT91
855	tristate "PATA support for AT91SAM9260"
856	depends on ARM && SOC_AT91SAM9
857	help
858	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
859
860	  If unsure, say N.
861
862config PATA_CMD640_PCI
863	tristate "CMD640 PCI PATA support (Experimental)"
864	depends on PCI
865	help
866	  This option enables support for the CMD640 PCI IDE
867	  interface chip. Only the primary channel is currently
868	  supported.
869
870	  If unsure, say N.
871
872config PATA_ISAPNP
873	tristate "ISA Plug and Play PATA support"
874	depends on ISAPNP
875	help
876	  This option enables support for ISA plug & play ATA
877	  controllers such as those found on old soundcards.
878
879	  If unsure, say N.
880
881config PATA_IXP4XX_CF
882	tristate "IXP4XX Compact Flash support"
883	depends on ARCH_IXP4XX
884	help
885	  This option enables support for a Compact Flash connected on
886	  the ixp4xx expansion bus. This driver had been written for
887	  Loft/Avila boards in mind but can work with others.
888
889	  If unsure, say N.
890
891config PATA_MPIIX
892	tristate "Intel PATA MPIIX support"
893	depends on PCI
894	help
895	  This option enables support for MPIIX PATA support.
896
897	  If unsure, say N.
898
899config PATA_NS87410
900	tristate "Nat Semi NS87410 PATA support"
901	depends on PCI
902	help
903	  This option enables support for the National Semiconductor
904	  NS87410 PCI-IDE controller.
905
906	  If unsure, say N.
907
908config PATA_OPTI
909	tristate "OPTI621/6215 PATA support (Very Experimental)"
910	depends on PCI
911	help
912	  This option enables full PIO support for the early Opti ATA
913	  controllers found on some old motherboards.
914
915	  If unsure, say N.
916
917config PATA_PALMLD
918	tristate "Palm LifeDrive PATA support"
919	depends on MACH_PALMLD
920	help
921	  This option enables support for Palm LifeDrive's internal ATA
922	  port via the new ATA layer.
923
924	  If unsure, say N.
925
926config PATA_PCMCIA
927	tristate "PCMCIA PATA support"
928	depends on PCMCIA
929	help
930	  This option enables support for PCMCIA ATA interfaces, including
931	  compact flash card adapters via the new ATA layer.
932
933	  If unsure, say N.
934
935config PATA_PLATFORM
936	tristate "Generic platform device PATA support"
937	depends on EXPERT || PPC || HAVE_PATA_PLATFORM
938	help
939	  This option enables support for generic directly connected ATA
940	  devices commonly found on embedded systems.
941
942	  If unsure, say N.
943
944config PATA_OF_PLATFORM
945	tristate "OpenFirmware platform device PATA support"
946	depends on PATA_PLATFORM && OF
947	help
948	  This option enables support for generic directly connected ATA
949	  devices commonly found on embedded systems with OpenFirmware
950	  bindings.
951
952	  If unsure, say N.
953
954config PATA_QDI
955	tristate "QDI VLB PATA support"
956	depends on ISA
957	select PATA_LEGACY
958	help
959	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
960
961config PATA_RB532
962	tristate "RouterBoard 532 PATA CompactFlash support"
963	depends on MIKROTIK_RB532
964	help
965	  This option enables support for the RouterBoard 532
966	  PATA CompactFlash controller.
967
968	  If unsure, say N.
969
970config PATA_RZ1000
971	tristate "PC Tech RZ1000 PATA support"
972	depends on PCI
973	help
974	  This option enables basic support for the PC Tech RZ1000/1
975	  PATA controllers via the new ATA layer
976
977	  If unsure, say N.
978
979config PATA_SAMSUNG_CF
980	tristate "Samsung SoC PATA support"
981	depends on SAMSUNG_DEV_IDE
982	help
983	  This option enables basic support for Samsung's S3C/S5P board
984	  PATA controllers via the new ATA layer
985
986	  If unsure, say N.
987
988config PATA_WINBOND_VLB
989	tristate "Winbond W83759A VLB PATA support (Experimental)"
990	depends on ISA
991	select PATA_LEGACY
992	help
993	  Support for the Winbond W83759A controller on Vesa Local Bus
994	  systems.
995
996comment "Generic fallback / legacy drivers"
997
998config PATA_ACPI
999	tristate "ACPI firmware driver for PATA"
1000	depends on ATA_ACPI && ATA_BMDMA
1001	help
1002	  This option enables an ACPI method driver which drives
1003	  motherboard PATA controller interfaces through the ACPI
1004	  firmware in the BIOS. This driver can sometimes handle
1005	  otherwise unsupported hardware.
1006
1007config ATA_GENERIC
1008	tristate "Generic ATA support"
1009	depends on PCI && ATA_BMDMA
1010	help
1011	  This option enables support for generic BIOS configured
1012	  ATA controllers via the new ATA layer
1013
1014	  If unsure, say N.
1015
1016config PATA_LEGACY
1017	tristate "Legacy ISA PATA support (Experimental)"
1018	depends on (ISA || PCI)
1019	help
1020	  This option enables support for ISA/VLB/PCI bus legacy PATA
1021	  ports and allows them to be accessed via the new ATA layer.
1022
1023	  If unsure, say N.
1024
1025endif # ATA_SFF
1026endif # ATA
1027