1/*
2 * P1021 MDS Device Tree Source
3 *
4 * Copyright 2010,2012 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12/include/ "p1021si-pre.dtsi"
13/ {
14	model = "fsl,P1021";
15	compatible = "fsl,P1021MDS";
16
17	aliases {
18		ethernet3 = &enet3;
19		ethernet4 = &enet4;
20	};
21
22	memory {
23		device_type = "memory";
24	};
25
26	lbc: localbus@ffe05000 {
27		reg = <0x0 0xffe05000 0x0 0x1000>;
28
29		/* NAND Flash, BCSR, PMC0/1*/
30		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
31			  0x1 0x0 0x0 0xf8000000 0x00008000
32			  0x2 0x0 0x0 0xf8010000 0x00020000
33			  0x3 0x0 0x0 0xf8020000 0x00020000>;
34
35		nand@0,0 {
36			#address-cells = <1>;
37			#size-cells = <1>;
38			compatible = "fsl,p1021-fcm-nand",
39				     "fsl,elbc-fcm-nand";
40			reg = <0x0 0x0 0x40000>;
41
42			partition@0 {
43				/* This location must not be altered  */
44				/* 1MB for u-boot Bootloader Image */
45				reg = <0x0 0x00100000>;
46				label = "NAND (RO) U-Boot Image";
47				read-only;
48			};
49
50			partition@100000 {
51				/* 1MB for DTB Image */
52				reg = <0x00100000 0x00100000>;
53				label = "NAND (RO) DTB Image";
54				read-only;
55			};
56
57			partition@200000 {
58				/* 4MB for Linux Kernel Image */
59				reg = <0x00200000 0x00400000>;
60				label = "NAND (RO) Linux Kernel Image";
61				read-only;
62			};
63
64			partition@600000 {
65				/* 5MB for Compressed Root file System Image */
66				reg = <0x00600000 0x00500000>;
67				label = "NAND (RO) Compressed RFS Image";
68				read-only;
69			};
70
71			partition@b00000 {
72				/* 6MB for JFFS2 based Root file System */
73				reg = <0x00a00000 0x00600000>;
74				label = "NAND (RW) JFFS2 Root File System";
75			};
76
77			partition@1100000 {
78				/* 14MB for JFFS2 based Root file System */
79				reg = <0x01100000 0x00e00000>;
80				label = "NAND (RW) Writable User area";
81			};
82
83			partition@1f00000 {
84				/* 1MB for microcode */
85				reg = <0x01f00000 0x00100000>;
86				label = "NAND (RO) QE Ucode";
87				read-only;
88			};
89		};
90
91		bcsr@1,0 {
92			#address-cells = <1>;
93			#size-cells = <1>;
94			compatible = "fsl,p1021mds-bcsr";
95			reg = <1 0 0x8000>;
96			ranges = <0 1 0 0x8000>;
97		};
98
99		pib@2,0 {
100			compatible = "fsl,p1021mds-pib";
101			reg = <2 0 0x10000>;
102		};
103
104		pib@3,0 {
105			compatible = "fsl,p1021mds-pib";
106			reg = <3 0 0x10000>;
107		};
108	};
109
110	soc: soc@ffe00000 {
111		compatible = "fsl,p1021-immr", "simple-bus";
112		ranges = <0x0 0x0 0xffe00000 0x100000>;
113
114		i2c@3000 {
115			rtc@68 {
116				compatible = "dallas,ds1374";
117				reg = <0x68>;
118			};
119		};
120
121		spi@7000 {
122
123			flash@0 {
124				#address-cells = <1>;
125				#size-cells = <1>;
126				compatible = "spansion,s25sl12801";
127				reg = <0>;
128				spi-max-frequency = <40000000>; /* input clock */
129
130				partition@u-boot {
131					label = "u-boot-spi";
132					reg = <0x00000000 0x00100000>;
133					read-only;
134				};
135				partition@kernel {
136					label = "kernel-spi";
137					reg = <0x00100000 0x00500000>;
138					read-only;
139				};
140				partition@dtb {
141					label = "dtb-spi";
142					reg = <0x00600000 0x00100000>;
143					read-only;
144				};
145				partition@fs {
146					label = "file system-spi";
147					reg = <0x00700000 0x00900000>;
148				};
149			};
150		};
151
152		usb@22000 {
153			phy_type = "ulpi";
154			dr_mode = "host";
155		};
156
157		mdio@24000 {
158			phy0: ethernet-phy@0 {
159				interrupts = <1 1 0 0>;
160				reg = <0x0>;
161			};
162			phy1: ethernet-phy@1 {
163				interrupts = <2 1 0 0>;
164				reg = <0x1>;
165			};
166			phy4: ethernet-phy@4 {
167				reg = <0x4>;
168			};
169			tbi-phy@5 {
170				device_type = "tbi-phy";
171				reg = <0x5>;
172			};
173		};
174
175		mdio@25000 {
176			tbi0: tbi-phy@11 {
177				reg = <0x11>;
178				device_type = "tbi-phy";
179			};
180		};
181
182		ethernet@b0000 {
183			phy-handle = <&phy0>;
184			phy-connection-type = "rgmii-id";
185		};
186
187		ethernet@b1000 {
188			phy-handle = <&phy4>;
189			tbi-handle = <&tbi0>;
190			phy-connection-type = "sgmii";
191		};
192
193		ethernet@b2000 {
194			phy-handle = <&phy1>;
195			phy-connection-type = "rgmii-id";
196		};
197
198		par_io@e0100 {
199			#address-cells = <1>;
200			#size-cells = <1>;
201			reg = <0xe0100 0x60>;
202			ranges = <0x0 0xe0100 0x60>;
203			device_type = "par_io";
204			num-ports = <3>;
205			pio1: ucc_pin@01 {
206				pio-map = <
207			/* port  pin  dir  open_drain  assignment  has_irq */
208					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
209					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
210					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
211					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
212					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
213					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
214					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
215					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
216					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
217					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
218					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
219					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
220					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
221					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
222					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
223					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
224					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
225					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
226			};
227
228			pio2: ucc_pin@02 {
229				pio-map = <
230			/* port  pin  dir  open_drain  assignment  has_irq */
231					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
232					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
233					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
234					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
235					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
236					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
237					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
238					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
239					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
240					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
241			};
242		};
243	};
244
245	pci0: pcie@ffe09000 {
246		reg = <0 0xffe09000 0 0x1000>;
247		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
248			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
249		pcie@0 {
250			ranges = <0x2000000 0x0 0xa0000000
251				  0x2000000 0x0 0xa0000000
252				  0x0 0x20000000
253
254				  0x1000000 0x0 0x0
255				  0x1000000 0x0 0x0
256				  0x0 0x100000>;
257		};
258	};
259
260	pci1: pcie@ffe0a000 {
261		reg = <0 0xffe0a000 0 0x1000>;
262		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
263			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
264		pcie@0 {
265			ranges = <0x2000000 0x0 0xc0000000
266				  0x2000000 0x0 0xc0000000
267				  0x0 0x20000000
268
269				  0x1000000 0x0 0x0
270				  0x1000000 0x0 0x0
271				  0x0 0x100000>;
272		};
273	};
274
275	qe: qe@ffe80000 {
276		ranges = <0x0 0x0 0xffe80000 0x40000>;
277		reg = <0 0xffe80000 0 0x480>;
278		brg-frequency = <0>;
279		bus-frequency = <0>;
280		status = "disabled"; /* no firmware loaded */
281
282		enet3: ucc@2000 {
283			device_type = "network";
284			compatible = "ucc_geth";
285			local-mac-address = [ 00 00 00 00 00 00 ];
286			rx-clock-name = "clk12";
287			tx-clock-name = "clk9";
288			pio-handle = <&pio1>;
289			phy-handle = <&qe_phy0>;
290			phy-connection-type = "mii";
291		};
292
293		mdio@2120 {
294			qe_phy0: ethernet-phy@0 {
295				interrupt-parent = <&mpic>;
296				interrupts = <4 1 0 0>;
297				reg = <0x0>;
298			};
299			qe_phy1: ethernet-phy@03 {
300				interrupt-parent = <&mpic>;
301				interrupts = <5 1 0 0>;
302				reg = <0x3>;
303			};
304			tbi-phy@11 {
305				reg = <0x11>;
306				device_type = "tbi-phy";
307			};
308		};
309
310		enet4: ucc@2400 {
311			device_type = "network";
312			compatible = "ucc_geth";
313			local-mac-address = [ 00 00 00 00 00 00 ];
314			rx-clock-name = "none";
315			tx-clock-name = "clk13";
316			pio-handle = <&pio2>;
317			phy-handle = <&qe_phy1>;
318			phy-connection-type = "rmii";
319		};
320	};
321};
322
323/include/ "p1021si-post.dtsi"
324