1/* 2 * arch/arm/mach-ks8695/include/mach/regs-switch.h 3 * 4 * Copyright (C) 2006 Andrew Victor 5 * 6 * KS8695 - Switch Registers and bit definitions. 7 * 8 * This file is licensed under the terms of the GNU General Public 9 * License version 2. This program is licensed "as is" without any 10 * warranty of any kind, whether express or implied. 11 */ 12 13#ifndef KS8695_SWITCH_H 14#define KS8695_SWITCH_H 15 16#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800) 17#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET) 18#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET) 19 20 21/* 22 * Switch registers 23 */ 24#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */ 25#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ 26#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ 27 28#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ 29 30#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ 31#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ 32#define KS8695_SEIAC (0x50) /* Indirect Access Control */ 33#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */ 34#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */ 35#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */ 36#define KS8695_SEAFC (0x60) /* Advance Feature Control */ 37#define KS8695_SEDSCPH (0x64) /* TOS Priority High */ 38#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */ 39#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */ 40#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */ 41#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */ 42#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */ 43 44 45/* Switch Engine Control 0 */ 46#define SEC0_LLED1S (7 << 25) /* LED1 Select */ 47#define LLED1S_SPEED (0 << 25) 48#define LLED1S_LINK (1 << 25) 49#define LLED1S_DUPLEX (2 << 25) 50#define LLED1S_COLLISION (3 << 25) 51#define LLED1S_ACTIVITY (4 << 25) 52#define LLED1S_FDX_COLLISION (5 << 25) 53#define LLED1S_LINK_ACTIVITY (6 << 25) 54#define SEC0_LLED0S (7 << 22) /* LED0 Select */ 55#define LLED0S_SPEED (0 << 22) 56#define LLED0S_LINK (1 << 22) 57#define LLED0S_DUPLEX (2 << 22) 58#define LLED0S_COLLISION (3 << 22) 59#define LLED0S_ACTIVITY (4 << 22) 60#define LLED0S_FDX_COLLISION (5 << 22) 61#define LLED0S_LINK_ACTIVITY (6 << 22) 62#define SEC0_ENABLE (1 << 0) /* Enable Switch */ 63 64 65 66#endif 67