1/*
2 * arch/arm/mach-dove/cm-a510.c
3 *
4 * Copyright (C) 2010 CompuLab, Ltd.
5 * Konstantin Sinyuk <kostyas@compulab.co.il>
6 *
7 * Based on Marvell DB-MV88AP510-BP Development Board Setup
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2.  This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/platform_device.h>
17#include <linux/ata_platform.h>
18#include <linux/mv643xx_eth.h>
19#include <linux/spi/spi.h>
20#include <linux/spi/flash.h>
21
22#include <asm/mach-types.h>
23#include <asm/mach/arch.h>
24
25#include <mach/dove.h>
26
27#include "common.h"
28
29static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
30	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
31};
32
33static struct mv_sata_platform_data cm_a510_sata_data = {
34	.n_ports        = 1,
35};
36
37/*
38 * SPI Devices:
39 * SPI0: 1M Flash Winbond w25q32bv
40 */
41static const struct flash_platform_data cm_a510_spi_flash_data = {
42	.type		= "w25q32bv",
43};
44
45static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
46	{
47		.modalias       = "m25p80",
48		.platform_data  = &cm_a510_spi_flash_data,
49		.irq            = -1,
50		.max_speed_hz   = 20000000,
51		.bus_num        = 0,
52		.chip_select    = 0,
53	},
54};
55
56static int __init cm_a510_pci_init(void)
57{
58	if (machine_is_cm_a510())
59		dove_pcie_init(1, 1);
60
61	return 0;
62}
63
64subsys_initcall(cm_a510_pci_init);
65
66/* Board Init */
67static void __init cm_a510_init(void)
68{
69	/*
70	 * Basic Dove setup. Needs to be called early.
71	 */
72	dove_init();
73
74	dove_ge00_init(&cm_a510_ge00_data);
75	dove_ehci0_init();
76	dove_ehci1_init();
77	dove_sata_init(&cm_a510_sata_data);
78	dove_sdio0_init();
79	dove_sdio1_init();
80	dove_spi0_init();
81	dove_spi1_init();
82	dove_uart0_init();
83	dove_uart1_init();
84	dove_i2c_init();
85	spi_register_board_info(cm_a510_spi_flash_info,
86				ARRAY_SIZE(cm_a510_spi_flash_info));
87}
88
89MACHINE_START(CM_A510, "Compulab CM-A510 Board")
90	.atag_offset	= 0x100,
91	.init_machine	= cm_a510_init,
92	.map_io		= dove_map_io,
93	.init_early	= dove_init_early,
94	.init_irq	= dove_init_irq,
95	.init_time	= dove_timer_init,
96	.restart	= dove_restart,
97MACHINE_END
98