1/* 2 * Copyright (C) 2015 3 * Nikolaus Schaller <hns@goldelico.com> 4 * 5 * Common device tree include for OpenPandora devices. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12#include <dt-bindings/input/input.h> 13 14/ { 15 cpus { 16 cpu@0 { 17 cpu0-supply = <&vcc>; 18 }; 19 }; 20 21 memory { 22 device_type = "memory"; 23 reg = <0x80000000 0x20000000>; /* 512 MB */ 24 }; 25 26 aliases { 27 display0 = &lcd; 28 }; 29 30 tv: connector@1 { 31 compatible = "connector-analog-tv"; 32 label = "tv"; 33 34 port { 35 tv_connector_in: endpoint { 36 remote-endpoint = <&venc_out>; 37 }; 38 }; 39 }; 40 41 gpio-leds { 42 43 compatible = "gpio-leds"; 44 45 pinctrl-names = "default"; 46 pinctrl-0 = <&led_pins>; 47 48 led@1 { 49 label = "pandora::sd1"; 50 gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ 51 linux,default-trigger = "mmc0"; 52 default-state = "off"; 53 }; 54 55 led@2 { 56 label = "pandora::sd2"; 57 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ 58 linux,default-trigger = "mmc1"; 59 default-state = "off"; 60 }; 61 62 led@3 { 63 label = "pandora::bluetooth"; 64 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ 65 linux,default-trigger = "heartbeat"; 66 default-state = "off"; 67 }; 68 69 led@4 { 70 label = "pandora::wifi"; 71 gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ 72 linux,default-trigger = "mmc2"; 73 default-state = "off"; 74 }; 75 }; 76 77 gpio-keys { 78 compatible = "gpio-keys"; 79 80 pinctrl-names = "default"; 81 pinctrl-0 = <&button_pins>; 82 83 up-button { 84 label = "up"; 85 linux,code = <KEY_UP>; 86 gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ 87 gpio-key,wakeup; 88 }; 89 90 down-button { 91 label = "down"; 92 linux,code = <KEY_DOWN>; 93 gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ 94 gpio-key,wakeup; 95 }; 96 97 left-button { 98 label = "left"; 99 linux,code = <KEY_LEFT>; 100 gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ 101 gpio-key,wakeup; 102 }; 103 104 right-button { 105 label = "right"; 106 linux,code = <KEY_RIGHT>; 107 gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ 108 gpio-key,wakeup; 109 }; 110 111 pageup-button { 112 label = "game 1"; 113 linux,code = <KEY_PAGEUP>; 114 gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ 115 gpio-key,wakeup; 116 }; 117 118 pagedown-button { 119 label = "game 3"; 120 linux,code = <KEY_PAGEDOWN>; 121 gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ 122 gpio-key,wakeup; 123 }; 124 125 home-button { 126 label = "game 4"; 127 linux,code = <KEY_HOME>; 128 gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ 129 gpio-key,wakeup; 130 }; 131 132 end-button { 133 label = "game 2"; 134 linux,code = <KEY_END>; 135 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ 136 gpio-key,wakeup; 137 }; 138 139 right-shift { 140 label = "l"; 141 linux,code = <KEY_RIGHTSHIFT>; 142 gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ 143 gpio-key,wakeup; 144 }; 145 146 kp-plus { 147 label = "l2"; 148 linux,code = <KEY_KPPLUS>; 149 gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ 150 gpio-key,wakeup; 151 }; 152 153 right-ctrl { 154 label = "r"; 155 linux,code = <KEY_RIGHTCTRL>; 156 gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ 157 gpio-key,wakeup; 158 }; 159 160 kp-minus { 161 label = "r2"; 162 linux,code = <KEY_KPMINUS>; 163 gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ 164 gpio-key,wakeup; 165 }; 166 167 left-ctrl { 168 label = "ctrl"; 169 linux,code = <KEY_LEFTCTRL>; 170 gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ 171 gpio-key,wakeup; 172 }; 173 174 menu { 175 label = "menu"; 176 linux,code = <KEY_MENU>; 177 gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ 178 gpio-key,wakeup; 179 }; 180 181 hold { 182 label = "hold"; 183 linux,code = <KEY_COFFEE>; 184 gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ 185 gpio-key,wakeup; 186 }; 187 188 left-alt { 189 label = "alt"; 190 linux,code = <KEY_LEFTALT>; 191 gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ 192 gpio-key,wakeup; 193 }; 194 195 lid { 196 label = "lid"; 197 linux,code = <0x00>; /* SW_LID lid shut */ 198 linux,input-type = <0x05>; /* EV_SW */ 199 gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ 200 }; 201 }; 202 203 /* HS USB Host PHY on PORT 2 */ 204 hsusb2_phy: hsusb2_phy { 205 compatible = "usb-nop-xceiv"; 206 reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ 207 vcc-supply = <&vaux2>; 208 }; 209 210 /* HS USB Host VBUS supply 211 * disabling this regulator causes current leakage, and LCD flicker 212 * on earlier (CC) board revisions, so keep it always on */ 213 usb_host_5v: fixed-regulator-usb_host_5v { 214 compatible = "regulator-fixed"; 215 regulator-name = "usb_host_5v"; 216 regulator-min-microvolt = <5000000>; 217 regulator-max-microvolt = <5000000>; 218 regulator-always-on; 219 regulator-boot-on; 220 enable-active-high; 221 gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ 222 }; 223 224 /* wg7210 (wifi+bt module) 32k clock buffer */ 225 wg7210_32k: fixed-regulator-wg7210_32k { 226 compatible = "regulator-fixed"; 227 regulator-name = "wg7210_32k"; 228 regulator-min-microvolt = <1800000>; 229 regulator-max-microvolt = <1800000>; 230 regulator-always-on; 231 enable-active-high; 232 gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>; 233 }; 234}; 235 236&omap3_pmx_core { 237 238 mmc1_pins: pinmux_mmc1_pins { 239 pinctrl-single,pins = < 240 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 241 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 242 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 243 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 244 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 245 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ 246 >; 247 }; 248 249 mmc2_pins: pinmux_mmc2_pins { 250 pinctrl-single,pins = < 251 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ 252 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ 253 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ 254 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ 255 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ 256 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ 257 OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */ 258 OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */ 259 OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */ 260 OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ 261 >; 262 }; 263 264 dss_dpi_pins: pinmux_dss_dpi_pins { 265 pinctrl-single,pins = < 266 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ 267 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ 268 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ 269 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ 270 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ 271 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ 272 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ 273 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ 274 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ 275 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ 276 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ 277 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ 278 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ 279 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ 280 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ 281 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ 282 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ 283 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ 284 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ 285 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ 286 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ 287 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ 288 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ 289 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ 290 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ 291 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ 292 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ 293 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ 294 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */ 295 >; 296 }; 297 298 uart3_pins: pinmux_uart3_pins { 299 pinctrl-single,pins = < 300 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ 301 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ 302 >; 303 }; 304 305 led_pins: pinmux_leds_pins { 306 pinctrl-single,pins = < 307 OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ 308 OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ 309 OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */ 310 OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */ 311 >; 312 }; 313 314 button_pins: pinmux_button_pins { 315 pinctrl-single,pins = < 316 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ 317 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ 318 OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */ 319 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */ 320 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */ 321 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */ 322 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */ 323 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */ 324 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */ 325 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */ 326 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */ 327 OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */ 328 OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */ 329 OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */ 330 OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */ 331 OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */ 332 OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */ 333 >; 334 }; 335 336 penirq_pins: pinmux_penirq_pins { 337 pinctrl-single,pins = < 338 /* here we could enable to wakeup the cpu from suspend by a pen touch */ 339 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ 340 >; 341 }; 342 343}; 344 345&omap3_pmx_core2 { 346 /* define in CPU specific file that includes this one 347 * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD() 348 */ 349}; 350 351&i2c1 { 352 clock-frequency = <2600000>; 353 354 twl: twl@48 { 355 reg = <0x48>; 356 interrupts = <7>; /* SYS_NIRQ cascaded to intc */ 357 interrupt-parent = <&intc>; 358 359 twl_power: power { 360 compatible = "ti,twl4030-power-reset"; 361 ti,use_poweroff; 362 }; 363 364 twl_audio: audio { 365 compatible = "ti,twl4030-audio"; 366 367 codec { 368 ti,ramp_delay_value = <3>; 369 }; 370 }; 371 }; 372}; 373 374#include "twl4030.dtsi" 375#include "twl4030_omap3.dtsi" 376 377&twl_keypad { 378 keypad,num-rows = <8>; 379 keypad,num-columns = <6>; 380 linux,keymap = < 381 MATRIX_KEY(0, 0, KEY_9) 382 MATRIX_KEY(0, 1, KEY_8) 383 MATRIX_KEY(0, 2, KEY_I) 384 MATRIX_KEY(0, 3, KEY_J) 385 MATRIX_KEY(0, 4, KEY_N) 386 MATRIX_KEY(0, 5, KEY_M) 387 MATRIX_KEY(1, 0, KEY_0) 388 MATRIX_KEY(1, 1, KEY_7) 389 MATRIX_KEY(1, 2, KEY_U) 390 MATRIX_KEY(1, 3, KEY_H) 391 MATRIX_KEY(1, 4, KEY_B) 392 MATRIX_KEY(1, 5, KEY_SPACE) 393 MATRIX_KEY(2, 0, KEY_BACKSPACE) 394 MATRIX_KEY(2, 1, KEY_6) 395 MATRIX_KEY(2, 2, KEY_Y) 396 MATRIX_KEY(2, 3, KEY_G) 397 MATRIX_KEY(2, 4, KEY_V) 398 MATRIX_KEY(2, 5, KEY_FN) 399 MATRIX_KEY(3, 0, KEY_O) 400 MATRIX_KEY(3, 1, KEY_5) 401 MATRIX_KEY(3, 2, KEY_T) 402 MATRIX_KEY(3, 3, KEY_F) 403 MATRIX_KEY(3, 4, KEY_C) 404 MATRIX_KEY(4, 0, KEY_P) 405 MATRIX_KEY(4, 1, KEY_4) 406 MATRIX_KEY(4, 2, KEY_R) 407 MATRIX_KEY(4, 3, KEY_D) 408 MATRIX_KEY(4, 4, KEY_X) 409 MATRIX_KEY(5, 0, KEY_K) 410 MATRIX_KEY(5, 1, KEY_3) 411 MATRIX_KEY(5, 2, KEY_E) 412 MATRIX_KEY(5, 3, KEY_S) 413 MATRIX_KEY(5, 4, KEY_Z) 414 MATRIX_KEY(6, 0, KEY_L) 415 MATRIX_KEY(6, 1, KEY_2) 416 MATRIX_KEY(6, 2, KEY_W) 417 MATRIX_KEY(6, 3, KEY_A) 418 MATRIX_KEY(6, 4, KEY_RIGHTBRACE) 419 MATRIX_KEY(7, 0, KEY_ENTER) 420 MATRIX_KEY(7, 1, KEY_1) 421 MATRIX_KEY(7, 2, KEY_Q) 422 MATRIX_KEY(7, 3, KEY_LEFTSHIFT) 423 MATRIX_KEY(7, 4, KEY_LEFTBRACE ) 424 >; 425}; 426 427/* backup battery charger */ 428&charger { 429 ti,bb-uvolt = <3200000>; 430 ti,bb-uamp = <150>; 431}; 432 433/* MMC2 */ 434&vmmc2 { 435 regulator-min-microvolt = <1850000>; 436 regulator-max-microvolt = <3150000>; 437}; 438 439/* LCD */ 440&vaux1 { 441 regulator-min-microvolt = <3000000>; 442 regulator-max-microvolt = <3000000>; 443}; 444 445/* USB Host PHY */ 446&vaux2 { 447 regulator-min-microvolt = <1800000>; 448 regulator-max-microvolt = <1800000>; 449}; 450 451/* available on expansion connector */ 452&vaux3 { 453 regulator-min-microvolt = <2800000>; 454 regulator-max-microvolt = <2800000>; 455}; 456 457/* ADS7846 and nubs */ 458&vaux4 { 459 regulator-min-microvolt = <2800000>; 460 regulator-max-microvolt = <2800000>; 461}; 462 463/* power audio DAC and LID sensor */ 464&vsim { 465 regulator-min-microvolt = <2800000>; 466 regulator-max-microvolt = <2800000>; 467 regulator-always-on; 468}; 469 470&i2c2 { 471 clock-frequency = <100000>; 472 /* no clients so we should disable clock */ 473}; 474 475&i2c3 { 476 clock-frequency = <100000>; 477 478 bq27500@55 { 479 compatible = "ti,bq27500"; 480 reg = <0x55>; 481 }; 482 483}; 484 485&usb_otg_hs { 486 interface-type = <0>; 487 usb-phy = <&usb2_phy>; 488 phys = <&usb2_phy>; 489 phy-names = "usb2-phy"; 490 mode = <3>; 491 power = <50>; 492}; 493 494/* 495 * Many pandora boards have been produced with defective write-protect switches 496 * on either slot, so it was decided not to use this feature. If you know 497 * your board has good switches, feel free to uncomment wp-gpios below. 498 */ 499&mmc1 { 500 pinctrl-names = "default"; 501 pinctrl-0 = <&mmc1_pins>; 502 vmmc-supply = <&vmmc1>; 503 bus-width = <4>; 504 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; 505 /*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */ 506}; 507 508&mmc2 { 509 pinctrl-names = "default"; 510 pinctrl-0 = <&mmc2_pins>; 511 vmmc-supply = <&vmmc2>; 512 bus-width = <4>; 513 cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; 514 /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ 515}; 516 517/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ 518&mmc3 { 519 status = "disabled"; 520}; 521 522/* bluetooth*/ 523&uart1 { 524}; 525 526/* spare (expansion connector) */ 527&uart2 { 528}; 529 530/* console (expansion connector) */ 531&uart3 { 532 pinctrl-names = "default"; 533 pinctrl-0 = <&uart3_pins>; 534 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; 535}; 536 537&usbhshost { 538 port2-mode = "ehci-phy"; 539}; 540 541&usbhsehci { 542 phys = <0 &hsusb2_phy>; 543}; 544 545&gpmc { 546 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ 547 548 nand@0,0 { 549 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 550 nand-bus-width = <16>; 551 ti,nand-ecc-opt = "sw"; 552 553 gpmc,sync-clk-ps = <0>; 554 gpmc,cs-on-ns = <0>; 555 gpmc,cs-rd-off-ns = <44>; 556 gpmc,cs-wr-off-ns = <44>; 557 gpmc,adv-on-ns = <6>; 558 gpmc,adv-rd-off-ns = <34>; 559 gpmc,adv-wr-off-ns = <44>; 560 gpmc,we-off-ns = <40>; 561 gpmc,oe-off-ns = <54>; 562 gpmc,access-ns = <64>; 563 gpmc,rd-cycle-ns = <82>; 564 gpmc,wr-cycle-ns = <82>; 565 gpmc,wr-access-ns = <40>; 566 gpmc,wr-data-mux-bus-ns = <0>; 567 gpmc,device-width = <2>; 568 569 #address-cells = <1>; 570 #size-cells = <1>; 571 572 /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */ 573 574 x-loader@0 { 575 label = "xloader"; 576 reg = <0 0x80000>; 577 }; 578 579 bootloaders@80000 { 580 label = "uboot"; 581 reg = <0x80000 0x1e0000>; 582 }; 583 584 bootloaders_env@260000 { 585 label = "uboot-env"; 586 reg = <0x260000 0x20000>; 587 }; 588 589 kernel@280000 { 590 label = "boot"; 591 reg = <0x280000 0xa00000>; 592 }; 593 594 filesystem@c80000 { 595 label = "rootfs"; 596 reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ 597 }; 598 }; 599}; 600 601&mcspi1 { 602 tsc2046@0 { 603 reg = <0>; /* CS0 */ 604 compatible = "ti,tsc2046"; 605 spi-max-frequency = <1000000>; 606 pinctrl-names = "default"; 607 pinctrl-0 = <&penirq_pins>; 608 interrupt-parent = <&gpio3>; 609 interrupts = <30 0>; /* GPIO_94 */ 610 pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; 611 vcc-supply = <&vaux4>; 612 613 ti,x-min = /bits/ 16 <0>; 614 ti,x-max = /bits/ 16 <8000>; 615 ti,y-min = /bits/ 16 <0>; 616 ti,y-max = /bits/ 16 <4800>; 617 ti,x-plate-ohms = /bits/ 16 <40>; 618 ti,pressure-max = /bits/ 16 <255>; 619 620 linux,wakeup; 621 }; 622 623 lcd: lcd@1 { 624 reg = <1>; /* CS1 */ 625 compatible = "omapdss,tpo,td043mtea1"; 626 spi-max-frequency = <100000>; 627 spi-cpol; 628 spi-cpha; 629 630 label = "lcd"; 631 reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */ 632 vcc-supply = <&vaux1>; 633 634 port { 635 lcd_in: endpoint { 636 remote-endpoint = <&dpi_out>; 637 }; 638 }; 639 }; 640 641 642}; 643 644/* n/a - used as GPIOs */ 645&mcbsp1 { 646}; 647 648/* audio DAC */ 649&mcbsp2 { 650}; 651 652/* bluetooth */ 653&mcbsp3 { 654}; 655 656/* to twl4030*/ 657&mcbsp4 { 658}; 659 660&venc { 661 status = "ok"; 662 663 vdda-supply = <&vdac>; 664 665 port { 666 venc_out: endpoint { 667 remote-endpoint = <&tv_connector_in>; 668 ti,channels = <2>; 669 }; 670 }; 671}; 672 673&dss { 674 pinctrl-names = "default"; 675 pinctrl-0 = < &dss_dpi_pins >; 676 677 status = "ok"; 678 vdds_dsi-supply = <&vpll2>; 679 680 port { 681 dpi_out: endpoint { 682 remote-endpoint = <&lcd_in>; 683 data-lines = <24>; 684 }; 685 }; 686}; 687