1* Freescale SGTL5000 Stereo Codec
2
3Required properties:
4- compatible : "fsl,sgtl5000".
5
6- reg : the I2C address of the device
7
8- clocks : the clock provider of SYS_MCLK
9
10- micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
11	The resistor can take values of 2k, 4k or 8k.
12	If set to 0 it will be off.
13	If this node is not mentioned or if the value is unknown, then
14	micbias	resistor is set to 4K.
15
16- micbias-voltage-m-volts : the bias voltage to be used in mVolts
17	The voltage can take values from 1.25V to 3V by 250mV steps
18	If this node is not mentionned or the value is unknown, then
19	the value is set to 1.25V.
20
21- VDDA-supply : the regulator provider of VDDA
22
23- VDDIO-supply: the regulator provider of VDDIO
24
25Optional properties:
26
27- VDDD-supply : the regulator provider of VDDD
28
29Example:
30
31codec: sgtl5000@0a {
32	compatible = "fsl,sgtl5000";
33	reg = <0x0a>;
34	clocks = <&clks 150>;
35	micbias-resistor-k-ohms = <2>;
36	micbias-voltage-m-volts = <2250>;
37	VDDA-supply = <&reg_3p3v>;
38	VDDIO-supply = <&reg_3p3v>;
39};
40