1TI SOC ECAP based APWM controller
2
3Required properties:
4- compatible: Must be "ti,<soc>-ecap".
5  for am33xx - compatible = "ti,am33xx-ecap";
6  for da850  - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
7- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
8  the cells format. The PWM channel index ranges from 0 to 4. The only third
9  cell flag supported by this binding is PWM_POLARITY_INVERTED.
10- reg: physical base address and size of the registers map.
11
12Optional properties:
13- ti,hwmods: Name of the hwmod associated to the ECAP:
14  "ecap<x>", <x> being the 0-based instance number from the HW spec
15
16Example:
17
18ecap0: ecap@0 { /* ECAP on am33xx */
19	compatible = "ti,am33xx-ecap";
20	#pwm-cells = <3>;
21	reg = <0x48300100 0x80>;
22	ti,hwmods = "ecap0";
23};
24
25ecap0: ecap@0 { /* ECAP on da850 */
26	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
27	#pwm-cells = <3>;
28	reg = <0x306000 0x80>;
29};
30