1* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
2
3Required properties:
4- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
5- reg: address and length of the register set for the device.
6- interrupts: interrupts for the device, first cell must be for the rx
7  interrupts, and the second cell should be for the transmit queues. An
8  optional third interrupt cell for Wake-on-LAN can be specified
9- local-mac-address: Ethernet MAC address (48 bits) of this adapter
10- phy-mode: Should be a string describing the PHY interface to the
11  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
12- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
13  the property specific details
14
15Optional properties:
16- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
17- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
18- systemport,num-txq: number of HW transmit queues, an integer
19- systemport,num-rxq: number of HW receive queues, an integer
20
21Example:
22ethernet@f04a0000 {
23	compatible = "brcm,systemport-v1.00";
24	reg = <0xf04a0000 0x4650>;
25	local-mac-address = [ 00 11 22 33 44 55 ];
26	fixed-link = <0 1 1000 0 0>;
27	phy-mode = "gmii";
28	interrupts = <0x0 0x16 0x0>,
29		<0x0 0x17 0x0>;
30};
31