1* Hisilicon specific extensions to the Synopsys Designware Mobile
2  Storage Host Controller
3
4Read synopsys-dw-mshc.txt for more details
5
6The Synopsys designware mobile storage host controller is used to interface
7a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
8differences between the core Synopsys dw mshc controller properties described
9by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
10extensions to the Synopsys Designware Mobile Storage Host Controller.
11
12Required Properties:
13
14* compatible: should be one of the following.
15  - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
16  - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
17
18Optional Properties:
19- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
20
21Example:
22
23	/* for Hi3620 */
24
25	/* SoC portion */
26	dwmmc_0: dwmmc0@fcd03000 {
27		compatible = "hisilicon,hi4511-dw-mshc";
28		reg = <0xfcd03000 0x1000>;
29		interrupts = <0 16 4>;
30		#address-cells = <1>;
31		#size-cells = <0>;
32		clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
33		clock-names = "ciu", "biu";
34	};
35
36	/* Board portion */
37	dwmmc0@fcd03000 {
38		num-slots = <1>;
39		vmmc-supply = <&ldo12>;
40		fifo-depth = <0x100>;
41		pinctrl-names = "default";
42		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
43		bus-width = <4>;
44		disable-wp;
45		cd-gpios = <&gpio10 3 0>;
46		cap-mmc-highspeed;
47		cap-sd-highspeed;
48	};
49
50	/* for Hi6220 */
51
52	dwmmc_1: dwmmc1@f723e000 {
53		compatible = "hisilicon,hi6220-dw-mshc";
54		num-slots = <0x1>;
55		bus-width = <0x4>;
56		disable-wp;
57		cap-sd-highspeed;
58		sd-uhs-sdr12;
59		sd-uhs-sdr25;
60		card-detect-delay = <200>;
61		hisilicon,peripheral-syscon = <&ao_ctrl>;
62		reg = <0x0 0xf723e000 0x0 0x1000>;
63		interrupts = <0x0 0x49 0x4>;
64		clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>;
65		clock-names = "ciu", "biu";
66		cd-gpios = <&gpio1 0 1>;
67		pinctrl-names = "default", "idle";
68		pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
69		pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
70		vqmmc-supply = <&ldo7>;
71		vmmc-supply = <&ldo10>;
72	};
73